TCMT090204-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, the Tiger·tec Gold coating and an optimised chipbreaker for consistent productivity in steel turning. The triangular insert balances edge strength with good surface finish thanks to its 0.4 mm corner radius and 7° clearance angle. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. TCMT090204-RP4 WPP30G — Turning insert TCMT090204-RP4 WPP30G for Steel (Walter Tools) A TCMT090204-RP4 WPP30G triangular turning insert designed for reliable general turning of steel components, combining Tiger·tec Gold coating with an RP4 chipbreaker. Tiger·tec Gold coated carbide Optimised RP4 chipbreaker 7° clearance angle for stable cutting Triangular 60° form for strong cutting edges Consistent cutting performance for steel production The triangular indexable insert delivers a reliable balance of wear resistance and toughness thanks to the Tiger·tec Gold coating and the WPP30G grade. Coated carbide technology reduces flank wear under typical steel machining temperatures, which extends tool life and reduces downtime. The insert’s chip control geometry ensures predictable chip formation during medium to heavy cuts, supporting steady cycle times and consistent component quality. Improved surface finish with strong edge geometry With a 0.4 mm corner radius and a triangular 60° form, the insert provides enhanced edge strength while enabling fine surface results on turned parts. The moderate corner radius increases resistance to edge chipping during interrupted cuts and contributes to uniform surface quality in finishing passes. This makes the insert suited to workflows where repeatable tolerances and good finishes are required without sacrificing durability. Efficient chip handling and process reliability The RP4 chipbreaker is configured to break and evacuate chips effectively when machining steels, reducing the risk of entanglement and tool nose wear. Combined with the 7° clearance angle, the insert maintains cutting stability and lowers cutting forces, which benefits tool life and machine load. These features together support higher uptime and predictable process windows in production environments. Practical application and support for process integration Designed for general turning of steel (ISO group P), the insert matches common industrial requirements for turning unalloyed and alloyed steels. The robust combination of coating, chipbreaker and geometry means straightforward tool selection for many standard turning operations. For specific alloys, cutting parameters or to integrate the insert into existing toolholders, Metav Werkzeuge provides application assistance and cutting-data advice to help achieve optimal productivity. Contact Metav Werkzeuge for tailored cutting-data, application advice and to discuss the Walter Tools TCMT090204-RP4 WPP30G for steel machining Technical data SKU: TCMT090204-RP4-WPP30G-WALTER Article designation: TCMT090204-RP4 WPP30G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Insert size: 09 Insert thickness: 02 Tolerance class: M Special features Series: Tiger·tec Gold Grade / Sort: WPP30G Chipbreaker: RP4 Coating: Tiger·tec Gold (coated carbide) Suitable for machining: Steel (ISO group P) Application type: Turning / boring indexable insert FAQ What materials is this insert suitable for? The TCMT090204-RP4 WPP30G insert (Walter Tools turning insert) is designed primarily for Steel in the ISO P group and is optimised for the typical heat and chip conditions encountered when machining unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the TCMT090204-RP4 WPP30G insert improves wear resistance and supports stable cutting over extended tool life, helping to maintain dimensional accuracy and reduce the frequency of insert changes. Which chipbreaker is fitted and what does it do? This insert features the RP4 chipbreaker, which promotes controlled chip fragmentation and reliable evacuation during turning, reducing the likelihood of chip-related interruptions and improving surface consistency. Can the insert handle interrupted cuts? The triangular geometry with a 0.4 mm corner radius and robust coating makes this insert suitable for many interrupted cutting situations; the combination enhances edge strength and reduces chipping risk. Is the TCMT090204-RP4 WPP30G compatible with standard toolholders? The TCMT090204-RP4 WPP30G follows common insert dimensions and clamping principles for triangular turning inserts; compatibility depends on the specific holder series, so verify holder insert seat and clamping type before selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product from the manufacturer.
TCMT090208-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade to secure stable cutting performance in stainless steels and heat-resistant alloys; the FM4 chipbreaker plus a 0.8 mm corner radius ensure reliable chip control and consistent surface quality in continuous production. Order the insert via Metav Werkzeuge or contact our advisers for cutting data and application support. TCMT090208-FM4 WSM20S — Indexable Turning & Drilling Insert (Walter Tools) The TCMT090208-FM4 WSM20S is a triangular 60° indexable insert designed for turning and boring operations on stainless steels and heat‑resistant superalloys, combining a thermal‑stable coating with a chipbreaker tuned for secure chip formation. Tiger·tec Silver coating for thermal stability WSM20S grade for stainless and superalloys FM4 chipbreaker for secure chip control Triangular 60° form with 0.8 mm corner radius High‑performance grade tailored for difficult materials The WSM20S grade, built on Walter Tools’ Tiger·tec Silver technology, brings a balance of heat resistance and cutting‑edge stability when machining demanding materials. As a coated cemented carbide grade, it supports secure chip formation and reduces edge build‑up when working with stainless steels and heat‑resistant alloys. For production environments where thermal loads and abrasive wear shorten tool life, this grade extends effective cutting time and helps maintain dimensional stability of components. Geometry and chip control for repeatable surface quality The triangular 60° plate form combined with the FM4 chipbreaker yields controlled chip flow and reliable evacuation in both turning and light boring tasks. The 0.8 mm corner radius supports a durable cutting edge that resists chipping while still enabling a good surface finish. The modest 7° clearance angle helps avoid rubbing on the workpiece and keeps cutting forces predictable, which is advantageous on machines where consistent tool engagement is essential for part repeatability. Process security and predictable tool life By pairing a resilient coating system with a carbide grade optimised for high temperatures, this insert provides process security in series production. The coating reduces friction and thermal softening at the cutting zone, while the substrate and chipbreaker design limit notch wear and edge degradation. In practice, this leads to fewer tool changes, reduced downtime and more consistent batch quality — measurable gains for workshops that prioritise throughput and reproducible results. Where and how this insert is best applied This indexable insert is suited to turning and boring of stainless steels and nickel‑base or titanium‑based alloys where heat generation and work‑hardening are common challenges. Typical applications include component faces, shoulder cuts and interrupted cuts where a combination of edge strength and heat resistance is needed. The insert’s form and chipbreaker support medium to heavy machining parameters, but final speeds and feeds should be selected according to machine rigidity and workpiece characteristics; consult technical advisors for optimised cutting data. For machining stainless and heat‑resistant alloys with a focus on stable edge life and reproducible results, request the Walter Tools TCMT090208‑FM4 WSM20S insert via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting recommendations. Technical data SKU: TCMT090208-FM4-WSM20S-WALTER Article designation: TCMT090208-FM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 09 Plate thickness: 02 Special features Coating: Tiger·tec Silver Chipbreaker: FM4 Tolerance class: M Applicable material groups: S, M Suitable for stainless steels FAQ What materials is this insert designed for? The TCMT090208‑FM4 WSM20S insert is designed primarily for stainless steels (ISO group M) and high‑temperature superalloys (ISO group S), offering thermal stability and edge strength for these materials. How does the FM4 chipbreaker influence machining? The FM4 chipbreaker promotes secure chip formation and evacuation, reducing the risk of built‑up edge and improving surface finish consistency when using the TCMT090208‑FM4 WSM20S insert. Can this insert be used for both turning and boring? Yes, the triangular 60° geometry and robust chip control make the insert suitable for both turning and light boring operations where material and cutting conditions match the grade’s strengths. What are the key geometry values to consider for setup? Important parameters are the 0.8 mm corner radius and the 7° clearance angle; these influence edge strength and contact conditions and should be considered when selecting feeds and depths of cut for the insert. Is the coating beneficial for interrupted cuts? The Tiger·tec Silver coating enhances thermal resistance and reduces friction, which can improve performance in interrupted and continuous cuts on demanding alloys when combined with appropriate cutting data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only and indicate no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory‑new product of the manufacturer.
TCMT090208-FP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade to extend tool life and maintain consistent chip control in steel turning; order via Metav Werkzeuge or consult the technical team for application support. TCMT090208-FP4 WPP20G turning insert for Stahl — Walter Tools TCMT090208-FP4 WPP20G is an indexable turning and boring insert engineered for productive turning of Stahl, combining a robust chipbreaker and a geometry optimised for consistent surface quality. TCMT090208-FP4 WPP20G by Walter Tools Tiger·tec Gold coating for improved wear resistance Triangle 60° insert with 0.8 mm corner radius Optimised for Stahl machining (ISO P) Longer tool life through modern coating technology The combination of the Tiger·tec Gold series and the WPP20G grade provides a coated carbide solution that improves wear resistance and extends tool life under the thermal and mechanical loads typical for Stahl (ISO P). The applied coating technology is tailored to reduce crater wear and maintain a stable cutting edge, which translates into longer uninterrupted production runs and fewer insert changes. For manufacturing operations seeking measurable improvements in uptime, this insert’s material and coating pairing is a decisive factor in lowering tooling-related downtime while supporting reproducible component quality. Consistent chip control and dimensional stability The FP4 chipbreaker, matched with a triangle 60° plate form and a 0.8 mm corner radius, promotes reliable chip shaping and evacuation during medium to general turning tasks. The geometry with a 7° clearance angle helps to reduce rubbing at the flank and supports predictable cutting forces, aiding tool life and surface finish. Tolerance class M ensures repeatable insert dimensions, which is essential for automated toolchanges and maintaining concentricity in serial production. The clear link between geometry and process stability makes this insert suitable for workflows where consistent part quality matters. Economic machining and broad Stahl coverage Designed with Stahl in mind, the WPP20G grade balances wear resistance and toughness to cover a wide range of steel alloys across standard production spectra. The insert’s specifications permit flexible parameter selection for many turning and boring operations, helping to reduce the variety of cutters required on the shopfloor. This simplification decreases inventory complexity and supports lower per-part tooling costs over time. For technical queries or to confirm suitability for a specific Stahl grade, the Metav Werkzeuge team is available to provide application guidance and cutting-parameter recommendations. Contact Metav Werkzeuge today for detailed application advice or to arrange supply of the TCMT090208-FP4 WPP20G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a technical consultant Technical data Article number: TCMT090208-FP4-WPP20G-WALTER Designation: TCMT090208-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Core measurements Corner radius: 0.8 mm Clearance angle: 7° Plate form: Triangle 60° Plate size: 09 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FP4 Material designation: P Primary application: Stahl (ISO P) Execution: T FAQ What materials is this insert intended for? The TCMT090208-FP4 WPP20G insert by Walter Tools is specified for machining Stahl (ISO P), making it suitable for a broad range of steel turning applications. How does the Tiger·tec Gold series benefit production? Tiger·tec Gold coating on the WPP20G grade increases wear resistance and improves edge stability under the thermal cycles common in Stahl turning, which supports longer tool life and consistent part quality. What is the purpose of the FP4 chipbreaker? The FP4 chipbreaker on this triangular insert shapes and controls chips during cutting, promoting safe evacuation and helping to maintain surface finish and tool life in medium turning operations. Can this insert be used for rostfreier Stahl or non-ferrous metals? No explicit rating for rostfreier Stahl or non-ferrous materials is provided for this grade; the insert is optimised for Stahl (ISO P) as indicated in the product data. How can tools be identified for correct replacement? Use the designation TCMT090208-FP4 WPP20G and the SKU TCMT090208-FP4-WPP20G-WALTER to match geometry, chipbreaker and grade when selecting replacements or spare inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TCMT090208-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of proven chip control and a robust cutting edge for consistent, high‑throughput machining of cast iron; the combination of the WKK20S grade and the Tiger‑tec Silver technology delivers long tool life and reproducible results. Order directly via Metav Werkzeuge or contact the consultants for application advice. TCMT090208-MK4 WKK20S triangular 60° indexable insert — Tiger‑tec Silver, Walter Tools The TCMT090208-MK4 WKK20S is a triangular 60° indexable insert designed for productive turning and boring of cast iron components with optimised chip formation and durable coated carbide performance Tiger‑tec Silver coating technology Grade WKK20S optimised for cast iron Triangular 60° form with 0.8 mm corner 7° relief angle for steady cutting High-efficiency machining of cast iron with stable chip control The combination of the WKK20S carbide grade and the Tiger‑tec Silver coating is engineered for cast iron applications, matching the abrasive wear behaviour and the typically short, brittle chips of these materials. This results in stable chip formation and reduced risk of edge chipping, so cycle times are more predictable and rework rates fall. The insert's MK4 chipbreaker geometry assists in breaking and evacuating chips reliably, which benefits both automated and manual machining operations where uninterrupted production is essential. For shops seeking a reproducible machining process, this specification supports consistent part quality. Coating and substrate that extend tool life and process security The coated carbide system provides an improved thermal barrier and enhanced wear resistance compared with uncoated grades; Tiger‑tec Silver reduces adhesive and abrasive wear mechanisms during interrupted turning and heavy cut entries. This wear resistance preserves a stable cutting edge for longer periods, lowering the frequency of index changes and increasing productivity. The coating technology also contributes to surface finish stability across batches, which aids in achieving repeatable tolerances in serial production. Technical users benefit from a tool that supports higher metal removal rates while maintaining tool life. Geometry designed for versatility and robust edge strength A triangular 60° plate with a 0.8 mm corner radius offers a balance between strength and form accuracy: the larger corner radius gives improved edge support for heavy depths of cut, while the 60° basic shape permits multiple indexing positions for economical use. The 7° relief angle helps to reduce rubbing on the flank face and lowers cutting forces in demanding cuts. These geometric choices mean fewer tool changes and predictable wear patterns, which support lean manufacturing workflows and easier process planning. Practical integration and application guidance The insert is suited to ISO group K (cast iron) machining according to the material group designation and is particularly effective where short, breaking chips and abrasive wear are common. Its design permits simple mounting in compatible toolholders and fast index changes to maintain uptime. For implementation, recommend verifying holder compatibility with the TCMT090208‑MK4 form and selecting cutting parameters aligned with cast iron machining tables; the combination of geometry and grade typically supports robust performance in both roughing and medium finishing operations. For specific parameter recommendations or to confirm suitability for a particular machine setup, technical consultation is available. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Silver inserts or to discuss suitable toolholder combinations; Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: TCMT090208-MK4-WKK20S-WALTER Designation: TCMT090208-MK4 WKK20S Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 09 Thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S Chipbreaker: MK4 Material group suitability: cast iron (ISO K) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert intended for? The insert is specified for cast iron machining; the WKK20S grade and Tiger‑tec Silver coating are optimised for abrasive wear and short, breaking chips typical of cast iron. How does the MK4 chipbreaker affect performance? The MK4 chipbreaker promotes controlled chip formation and reliable evacuation, reducing the risk of entanglement and improving surface consistency when turning cast iron. What are the key geometric advantages of this triangular insert? The triangular 60° form provides three usable cutting edges, while the 0.8 mm corner radius and 7° relief angle combine to deliver robust edge support and lowered flank rubbing in medium to heavy cuts. Is this insert compatible with standard TCMT toolholders? The designation TCMT090208‑MK4 corresponds to standard TCMT toolholder interfaces; compatibility should be confirmed against the specific holder catalogue and clamping specification. How does the Tiger‑tec Silver technology influence tool life? The Tiger‑tec Silver coating reduces adhesive and abrasive wear, enhancing thermal resistance and generally extending the usable life of the cutting edge under cast iron machining conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; www.walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names are used for identification and explanation only. The mentioned Walter Tools product is an original, factory‑new article from the manufacturer.
TCMT090208-MM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger·tec Silver grade and a compact triangular geometry to secure stable cutting edges and consistent surface quality in machining rostfreier Stahl and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or consult the team for cutting-data recommendations. TCMT090208-MM4 WSM20S — Triangular indexable insert for turning and boring, Tiger·tec Silver, Walter Tools A robust triangular 60° indexable insert, TCMT090208-MM4 WSM20S, engineered for demanding turning and boring applications in rostfreier Stahl and heat-resistant superalloys TCMT090208-MM4 WSM20S by Walter Tools Tiger·tec Silver coating for high heat resistance Triangle 60° form with 0.8 mm nose radius Optimised for rostfreier Stahl and superalloys High-temperature performance for demanding alloys The combination of the Tiger·tec Silver technology and the WSM20S grade delivers improved thermal resistance and reliable edge stability during heavy-duty machining. This coating system reduces flank wear and supports a consistent cutting edge, which directly translates into fewer disruptions on the shop floor and longer intervals between index changes. For applications where heat build-up and workpiece adhesion are critical, the insert’s material pairing is specifically tuned to maintain productivity during prolonged contact with hot chips. Geometry that balances surface finish and edge strength A triangle 60° geometry with a 0.8 mm corner radius provides a balance between cutting robustness and surface quality. The three-edged format increases usable edge count while the moderate nose radius enables predictable chip formation and improved dimensional control on turned surfaces. The indexable insert design helps maintain repeatable results across multiple setups, reducing rework and ensuring consistent part tolerances in serial production. Better chip control and process security Equipped with the MM4 chipbreaker, this insert supports controlled chip segmentation for both continuous and semi-continuous chips encountered in rostfreier Stahl and heat-resistant materials. Controlled chips lower the risk of built-up edge and improve evacuation from the cutting zone, which in turn enhances operator safety and machine uptime. The combination of chip control and a stable cutting edge increases process security and reduces the need for constant feed or speed adjustments. Production benefits: predictable tool life and efficient handling Users gain measurable production advantages from the insert’s design: extended tool life due to the coated carbide grade, fewer index changes because of the triangular format, and simplified tool management in the tool cabinet. These operational gains contribute to lower cycle-time variability and a clearer cost-per-part calculation, making the insert suitable for demanding manufacturing environments where consistency and throughput matter. Practical notes for integration and performance tuning The insert is designed for turning and boring operations where rostfreier Stahl and heat-resistant superalloys are predominant. When integrating into a machining process, start with conservative cutting data and adjust feeds to achieve the desired surface finish while monitoring edge wear. For tailored recommendations on speeds, feeds and coolant strategies, technical consultation is available to adapt parameters to the specific machining centre and holder geometry. For machining demanding rostfreier Stahl and superalloys, contact Metav Werkzeuge for application-tailored cutting data and advice on Walter Tools inserts such as the TCMT090208-MM4 WSM20S Technical Data Article number: TCMT090208-MM4-WSM20S-WALTER Designation: TCMT090208-MM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Triangle 60° Insert size: 09 Thickness: 02 Chipbreaker: MM4 Tolerance class: M Execution: T Materials & Applications Coating: Tiger·tec Silver Substrate: Coated carbide Suitable for: rostfreier Stahl (ISO group M) Suitable for: heat-resistant superalloys and titanium (ISO group S) Product type: Turning and boring indexable insert FAQ What materials are best suited to this insert? This Walter Tools insert is optimised for rostfreier Stahl and heat-resistant superalloys; the WSM20S grade supports secure chip formation and edge stability in these groups. What does the MM4 chipbreaker deliver in practice? The MM4 chipbreaker promotes controlled chip segmentation, improving evacuation and reducing built-up edge during operations in challenging alloys. How does the 60° triangular form affect tool life? The triangle shape provides three cutting edges per insert, which increases the number of usable edges and contributes to predictable tool-change intervals for the TCMT090208-MM4 WSM20S. Are there special recommendations for finishing passes? For improved surface quality, reduce feed and maintain a steady cutting speed; the 0.8 mm nose radius assists in achieving a fine finish while preserving edge strength. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools (Walter AG) is a leading manufacturer of precision cutting tools and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand-new product of the manufacturer.
TCMT090208-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and the WPP20G grade for reliable wear resistance and consistent performance in steel turning operations; the robust MP4 chipbreaker and triangle 60° geometry contribute to stable chip control and straightforward index changes. For procurement or detailed application advice, contact Metav Werkzeuge or consult their specialists. TCMT090208-MP4 WPP20G turning/boring indexable insert by Walter Tools — Tiger·tec Gold coated, MP4 chipbreaker TCMT090208-MP4 WPP20G is a coated carbide indexable insert designed for productive turning and boring applications in steel Tiger·tec Gold coated grade WPP20G Triangle 60° insert geometry MP4 chipbreaker for reliable chip control Corner radius 0.8 mm for finish turning High-performance grade for robust production The WPP20G grade, part of the Tiger·tec Gold family, provides a balanced combination of wear resistance and toughness for machining a wide range of steel grades. As a coated carbide solution, the insert reduces flank wear and extends edge life under typical turning loads; this leads to fewer index changes and improved overall tool economy. The specification supports operators and process engineers in maintaining consistent cycle times while protecting the cutting edge against thermal and mechanical stresses. Geometry and chip former engineered for stable cutting The triangle 60° insert geometry combined with the MP4 chipbreaker is aimed at promoting predictable chip formation and rapid evacuation in continuous and interrupted cuts. The modest corner radius of 0.8 mm helps achieve a fine surface finish without compromising strength at the cutting edge. A 7° clearance (free) angle reduces rubbing and minimises built-up edge, which in turn supports dimensional stability of the workpiece and repeatable surface quality during production runs. Optimised for steel turning with consistent results Classified for material group P, this insert is tailored to the heat and chip characteristics of unalloyed and alloyed steel. The tolerance class M and the plate form ensure compatibility with common turning toolholders using the TCMT090208 footprint, enabling quick replacement and short machine downtime. By selecting a grade designed for stability and a chipbreaker that controls swarf, the component enhances process reliability and supports higher productivity in batch and single-piece manufacturing environments. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools inserts; info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT090208-MP4-WPP20G-WALTER Designation: TCMT090208-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Free angle: 7° Corner radius: 0.8 mm Plate size: 09 Plate thickness: 02 Tolerance class: M Special features Coating / grade: WPP20G (Tiger·tec Gold) Chipbreaker: MP4 Plate form: Triangle 60° Suitable for: Steel (P) Execution: T Product type: Turning / boring indexable insert FAQ Which materials is this insert suitable for? The TCMT090208-MP4 WPP20G insert by Walter Tools is specified for machining materials in the P group, i.e. unalloyed and alloyed steel, and its coating and grade are tuned to the typical heat and chip behaviour of steel. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and edge stability, which in practical terms reduces flank wear and extends life of the insert under steel turning conditions. What is the role of the MP4 chipbreaker? The MP4 chipbreaker is designed to control chip formation and evacuation, improving surface finish and preventing long, tangled swarf in both continuous cutting and light interruptions. Is this insert compatible with standard TCMT090208 toolholders? The insert follows the TCMT090208 geometry and is intended for use in standard toolholders that accept this indexable insert form, enabling straightforward replacement and re-indexing. Manufacturer/Responsible: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT090208-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of dependable chip control, targeted wear resistance and a compact triangular form for efficient cast iron turning and boring. Order original Walter Tools inserts via Metav Werkzeuge or request consultancy for application-specific machining parameters. TCMT090208-RK4 WKK20S triangular turning/boring insert by Walter Tools — Tiger·tec Silver coated, for cast iron TCMT090208-RK4 WKK20S is a triangle 60° indexable insert designed for turning and boring applications, optimised for abrasive cast iron machining with a focus on stable chip formation and consistent tool life. WKK20S coated carbide for cast iron machining Triangle 60° insert with 0.8 mm corner radius RK4 chipbreaker for reliable chip control 7° clearance angle for reduced rubbing Consistent performance for abrasive cast iron machining The Tiger·tec Silver coating combined with the WKK20S grade provides a wear-resistant cutting surface specifically engineered for cast iron. This combination addresses abrasive wear and the typically short, brittle chip forms produced when machining grey and nodular cast irons. The result is a stable cutting edge and predictable tool life, which reduces unplanned interruptions in production. For workshop managers and production engineers, this means fewer insert changes and improved process stability when turning or boring cast-iron components. Chip control and surface quality that support productivity Equipped with the RK4 chipbreaker, this insert promotes controlled chip segmentation and evacuation, which is particularly beneficial in interrupted cuts and deep bore operations. The controlled chip form lowers the risk of built-up edge and improves surface finish consistency, enabling higher feed rates with maintained component integrity. The 0.8 mm corner radius balances edge strength and finish quality, offering a compromise between robust cutting performance and a fine surface result when required. Geometry and mounting advantages for cost-effective use The triangle 60° form gives three usable cutting edges per indexable insert, increasing the number of re-grinds or indexes available before replacement. The compact 02 thickness (as specified) and the 7° clearance angle minimise flank contact and reduce frictional heating, which helps preserve the coating and substrate under typical cast iron cutting conditions. These geometric features translate into economical edge utilisation and lower per-component tooling cost across medium- to high-volume runs. Practical selection and machining guidance When selecting parameters, consider the abrasive nature of cast iron: moderate cutting speeds with appropriate coolant strategy and steady feed rates will extend the life of the coated carbide grade. The insert is intended for turning and boring operations where chip control and process repeatability matter; pairing the insert with a stable toolholder and correct seat geometry will leverage the Tiger·tec Silver advantages fully. For production environments prioritising uptime, the insert’s predictable wear behaviour supports planned maintenance intervals and reduces variability in part quality. For tailored recommendations or to order original Walter Tools Tiger·tec Silver inserts, please contact Metav Werkzeuge — Metav’s technical consultants provide machining parameter suggestions and availability guidance. Technical Data SKU: TCMT090208-RK4-WKK20S-WALTER Designation: TCMT090208-RK4 WKK20S Manufacturer: Walter Tools Product type: Turning / Boring indexable insert Core specifications Insert shape: Triangle 60° Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: RK4 Series: Tiger·tec Silver Grade: WKK20S Thickness code: 02 Size code: 09 Tolerance class: M Execution: T Materials and features Coating: Tiger·tec Silver (coated carbide technology) Material: Coated carbide Suitable for: Cast iron machining (K) Application focus: Turning and boring with controlled chip formation FAQ What materials is this insert suitable for? The TCMT090208-RK4 WKK20S insert is formulated for cast iron machining; the WKK20S grade and Tiger·tec Silver coating address abrasive wear typical of these materials. How does the RK4 chipbreaker improve production? The RK4 chipbreaker on this insert promotes segmented chips and secure evacuation, reducing risks of chip entanglement and improving surface finish during turning and boring. How many cutting edges are available per insert? The triangular 60° geometry provides three indexable cutting edges per insert, which increases usable life and cost-efficiency in component production. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools: The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TCMT090208-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of high process reliability and controlled chip formation for consistent component quality; the combination of the Tiger·tec Silver grade and RM4 chipbreaker reduces downtime and supports productive machining of demanding alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCMT090208-RM4 WSM20S turning indexable insert (Tiger·tec Silver) by Walter Tools — for rostfreier Stahl and heat-resistant alloys The TCMT090208-RM4 WSM20S turning indexable insert is designed for demanding turning and boring tasks in rostfreier Stahl and temperature-resistant superalloys, offering stable edges and predictable tool life. Tiger·tec Silver coating for wear resistance WSM20S grade optimised for rostfreier Stahl RM4 chipbreaker for controlled chip formation Triangle 60° insert with 0.8 mm corner radius High wear resistance where heat and toughness meet The Tiger·tec Silver coating combined with the WSM20S grade delivers wear resistance and a stable cutting edge when machining tough materials. This composition is specifically engineered for applications involving rostfreier Stahl and heat-resistant superalloys, where thermal loads and material toughness challenge conventional grades. The coating technology supports secure chip formation and reduced adhesive wear, which contributes to longer effective life of the cutting edge and fewer unscheduled tool changes. As a result, machining cycles remain consistent and surface integrity is improved without complex parameter adjustments. Predictable chip control and surface quality through geometry The triangular 60° insert geometry with a 0.8 mm corner radius and the RM4 chipbreaker provides reliable chip segmentation and evacuation in both continuous and interrupted cuts. The 7° clearance angle minimises rubbing while maintaining edge strength, and the specific chipbreaker geometry supports short, controllable chips that reduce the risk of workpiece damage and tool breakouts. For operations where build-up edge or heat concentration can compromise results, this geometry enhances surface finish and dimensional stability while keeping the process robust and reproducible. Easy integration into production and efficient process economics With tolerance class M and the compact designation TCMT090208-RM4 WSM20S, the insert integrates seamlessly into standard toolholders for turning and boring operations. The combination of predictable wear characteristics and an industry-proven grade means fewer spare items in stock and simpler tool management. Process planners benefit from consistent cycle times and a reduction in rework rates, while workshop supervisors gain enhanced reproducibility across batches. The specification supports both roughing and semi-finishing strategies in rostfreier Stahl and high-temperature alloys, offering a balance between productivity and surface quality. For detailed application guidance or to secure supply of the TCMT090208-RM4 WSM20S insert from Walter Tools, contact Metav Werkzeuge for a tailored recommendation: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TCMT090208-RM4-WSM20S-WALTER Designation: TCMT090208-RM4 WSM20S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 09 Plate thickness: 02 Tolerance class: M Special features Coating/grade: Tiger·tec Silver / WSM20S Chipbreaker: RM4 Series: Tiger-tec Silver Application: rostfreier Stahl; heat-resistant superalloys and Titan Material groups: S / M Execution: T FAQ What materials is this insert suitable for? The TCMT090208-RM4 WSM20S insert from Walter Tools is specified for machining rostfreier Stahl and heat-resistant superalloys (material groups M and S), with geometry and grade optimised for these alloys. Which chip behaviour can be expected with the RM4 breaker? The RM4 chipbreaker on the TCMT090208-RM4 WSM20S promotes controlled, segmented chips that enhance evacuation and surface quality during turning and bored turning operations. Can this insert be used for both roughing and finishing? Yes, the combination of the 0.8 mm corner radius and the Tiger·tec Silver grade allows application across roughing and semi-finishing steps while maintaining edge stability. How does the triangle 60° form affect clamping and cutting directions? The triangle 60° form provides three indexed edges for economical use; the geometry is suitable for positive and neutral cutting conditions when mounted in compatible toolholders. What is the exact product designation and SKU for ordering? The full designation is TCMT090208-RM4 WSM20S (Tiger·tec Silver) by Walter Tools. SKU: TCMT090208-RM4-WSM20S-WALTER Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT090208-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and a versatile 0.8 mm corner radius for consistent steel machining. The result is stable chip formation, predictable tool life and efficient production — order via Metav Werkzeuge or contact our advisors for tailored recommendations. TCMT090208-RP4 WPP20G – Triangular 60° indexable insert for steel machining (Walter Tools) TCMT090208-RP4 WPP20G is a triangular indexable insert designed for drilling, bore-enlarging and light turning in steel applications, optimised for reliable chip control and repeatable results. Tiger‑tec Gold coated carbide Optimised for steel machining 60° triangular form for stable cuts 0.8 mm corner radius for versatility High-performance grade for productive steel machining The insert employs the WPP20G grade within the Tiger‑tec Gold family, a coated carbide designed for the thermal and mechanical demands of steel (ISO P). This coating technology combines wear resistance with a controlled edge toughness to extend cutting life under mixed cutting conditions. For production shops this translates into consistent surface finish, longer tool life and fewer tool changes, which contributes directly to higher machine utilisation and lower unit costs. Geometry engineered for stability and chip control The triangular 60° form and 0.8 mm corner radius provide a balance between strength and accessibility in transitional operations. The 7° relief angle reduces rubbing at entry and exit while keeping the cutting edge engaged under radial loads. The RP4 chipbreaker supports controlled chip formation when machining unalloyed and alloyed steels, lowering the risk of built-up edge and promoting continuous machining in automated or manual setups. Economic benefits from material and design choices Built from coated carbide, the insert is suitable for the heat and chip characteristics of steel and offers good wear resistance in general-purpose applications. The WPP20G grade is positioned as a universal to wear‑resistant option, allowing fewer tool variants across mixed steel batches. Fewer tool changes and predictable wear behaviour improve throughput and reduce process interruptions, delivering a measurable return in high-mix or high-volume environments. Practical fitment and application guidance The insert designation, TCMT090208-RP4 WPP20G, matches standard indexable insert sizes and fits compatible triangular toolholders for drilling and finishing passes. The plate thickness and 09 size make it suitable for medium to light-duty turning and bore finishing where a combination of rigidity and edge life is required. For best results, select cutting parameters aligned to the workpiece steel grade and machining strategy; the RP4 chipbreaker aids in keeping chips compact and evacuable in common machining set-ups. For proven performance with Tiger‑tec Gold inserts, contact Metav Werkzeuge for specification support and order placement — Metav Werkzeuge offers application advice and quick delivery coordination. Technical Data SKU: TCMT090208-RP4-WPP20G-WALTER Designation: TCMT090208-RP4 WPP20G Manufacturer: Walter Tools Facts Grade: WPP20G Relief angle: 7° Corner radius: 0.8 mm Insert form: Triangle 60° Size: 09 Thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Gold Coating: coated carbide Chipbreaker: RP4 Material application: steel (ISO P) Execution: T Product type: indexable insert for drilling/boring and turning Manufacturer brand: Walter Tools FAQ What materials is this insert intended for? The TCMT090208-RP4 WPP20G insert is designed principally for steel (ISO P); the WPP20G grade and Tiger‑tec Gold coating address the heat and chip characteristics typical of steel machining. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on the TCMT090208-RP4 WPP20G promotes compact, controllable chips when cutting steel, improving evacuation and reducing the likelihood of built-up edge during continuous cutting. Is this insert suitable for finishing and light turning? Yes, the 60° triangular form with a 0.8 mm corner radius makes the insert versatile for finishing passes and light turning operations when mounted in compatible toolholders. Which series and coating does the insert use? This item belongs to the Tiger‑tec Gold series and features a coated carbide construction under the WPP20G grade for balanced wear resistance and edge life. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tooling for metalworking and is part of the Swedish Sandvik group. Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new, and supplied by the manufacturer.
TCMT090208-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear protection, a triangle 60° geometry with a 0.8 mm corner radius, and a 7° clearance for consistent, productive steel machining; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCMT090208-RP4 WPP30G indexable insert for steel machining — Walter Tools The TCMT090208-RP4 WPP30G is a triangular indexable insert engineered for productive turning and drilling-related operations in steel applications, delivering controlled chip formation and extended edge life. Tiger·tec Gold coating for wear resistance Triangle 60° shape with 0.8 mm corner radius Optimised for steel machining (ISO P) Prolonged edge life through advanced coating technology The insert features the Tiger·tec Gold coating combined with the WPP30G grade, a coated carbide formulation developed for balanced wear resistance and toughness. This technology stabilises edge wear under the thermal and mechanical loads typical for steel cutting, which translates into longer tool life and fewer indexings. For production environments this means lower tooling costs per component and more consistent batch output, since the coating supports steady cutting performance and improved resistance to abrasive wear. Geometry that improves reliability and surface quality With a triangle 60° configuration and a 0.8 mm corner radius, the insert offers excellent edge strength while enabling reliable finishing performance. The modest corner radius increases load-bearing capacity at the cutting edge, reducing chipping risk during interrupted cuts. The specified 7° clearance assists in reducing rubbing and heat transfer to the flank, improving surface integrity. The RP4 chipbreaker promotes predictable chip control, aiding safe swarf removal and reducing the risk of built-up edge. These combined geometric features make the component suitable for stable turning and light finishing passes in industrial workflows. Clear operational benefits and application fit Designed for the ISO P material group, this insert supports a wide range of unalloyed and alloyed steel grades commonly encountered in machining shops. The compact size and standard TCMT designation facilitate use with readily available holders, enabling quick replacement and minimal setup time. Operational advantages include more consistent surface finishes, reduced rework due to edge reliability, and improved process security in serial production. For teams seeking both productivity and repeatability, the combination of coating, grade and geometry provides a pragmatic balance between tool life and machining quality. Choose the Walter Tools TCMT090208-RP4 WPP30G insert when consistent steel performance is required — contact Metav Werkzeuge for tailored cutting data and fast delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT090208-RP4-WPP30G-WALTER Designation: TCMT090208-RP4 WPP30G Brand: Walter Tools Type: Indexable insert (turning/drilling) Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 09 Plate thickness: 02 Tolerance class: M Special features Coated carbide grade WPP30G (Tiger·tec Gold technology) RP4 chipbreaker Application group: steel (ISO P) Designed for reliable chip control and stable edge life Suitable for productive turning and drilling-related operations FAQ What materials is this insert suitable for? The TCMT090208-RP4 WPP30G insert is optimised for machining steel (ISO P), covering both unalloyed and alloyed steel grades. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and edge stability, leading to longer tool life and more consistent batch results when using TCMT090208-RP4. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge robustness and reduces chipping in interrupted cuts, improving surface finish and process reliability with this insert. Can the RP4 chipbreaker be used for finishing passes? Yes; the RP4 chipbreaker offers controlled chip formation suitable for both stable roughing and light finishing, depending on cutting parameters and workpiece material. Which toolholders fit this insert designation? The TCMT090208-RP4 WPP30G matches standard toolholders designed for TCMT-format triangular inserts and can be fitted to common turning and boring tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110202-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver heat resistance, WSM10S grade and a precise triangle geometry for reliable machining of stainless steel and heat‑resistant superalloys; the result is stable chip control and consistent surface quality. Order the insert via Metav Werkzeuge or consult our specialists for application guidance. TCMT110202-FM4 WSM10S turning insert — Triangle 60° form, Tiger·tec Silver coating by Walter Tools TCMT110202-FM4 WSM10S is a triangle‑shaped indexable insert designed for turning applications on difficult‑to‑machine stainless steels and superalloys, offering a balance of thermal resistance and edge stability Tiger·tec Silver coating for heat resistance WSM10S grade for stainless & superalloys Triangle 60° form with 7° clearance FM4 chipbreaker for secure chip control High‑performance grade for demanding materials The WSM10S grade, part of the Tiger·tec Silver family, is a coated carbide designed specifically for machining stainless steel and heat‑resistant superalloys. Its coating improves thermal stability and wear resistance, which in turn reduces the risk of built‑up edge and premature flank wear. For production environments this translates into fewer tool changes and a steadier process, making the solution particularly suited to components that demand consistent surface finish and dimensional control. Geometry that supports reproducible chip control The triangle 60° shape combined with a 7° clearance angle and an integrated FM4 chipbreaker ensures predictable chip formation and evacuation during turning operations. A 0.2 mm corner radius helps distribute cutting forces and improves edge robustness on interrupted cuts. Together, these features reduce vibration and support steady cutting conditions, which is essential when working with tough‑to‑cut alloys where thermal load and material adhesion are common issues. Practical benefits for production and setup Using this insert brings measurable gains in process reliability: the coated grade mitigates heat‑related wear while the chipbreaker geometry lowers the likelihood of long, stringy chips that interrupt automated workflows. The compact triangle format offers three cutting edges per indexation, aiding cost efficiency per edge and simplifying tool inventory. When combined with suitable holders and cutting data, operators can expect fewer unplanned stoppages and improved repeatability across batches. Application advice and material scope The insert is specified for stainless steel (ISO group M) and heat‑resistant superalloys/titanium alloys (ISO group S), where problems such as poor thermal conductivity and aggressive work hardening demand a stable cutting edge. Selection of appropriate cutting speeds, feeds and coolant strategy will further enhance performance; consult technical data sheets for recommended parameters or seek guidance from Metav Werkzeuge for application‑specific recommendations. For turning operations that require thermal resilience and dependable chip control, choose the Walter Tools Tiger·tec Silver TCMT110202‑FM4 WSM10S insert — contact Metav Werkzeuge for tailored cutting data, availability and rapid delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT110202-FM4-WSM10S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Designation: TCMT110202-FM4 WSM10S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 11 mm Plate thickness: 0.2 mm (designation 02) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM10S Chipbreaker: FM4 Shape: Triangle 60° Applicable material groups: M (stainless steel), S (superalloys/titanium) Execution: T Material designation: S / M Base designation: TCMT110202-FM4 FAQ Which materials is this insert intended for? The TCMT110202‑FM4 WSM10S insert by Walter Tools is specified for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), providing improved thermal resistance and edge stability. What are the main geometry features that aid machining performance? The triangle 60° form, 7° clearance and FM4 chipbreaker combine to deliver reliable chip control and force distribution; the 0.2 mm corner radius enhances edge strength and surface finish consistency. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating increases thermal resistance and reduces abrasive wear, which contributes to longer edge life, fewer tool changes and more consistent results when machining tough, heat‑sensitive materials. Is this insert suitable for roughing and finishing operations? Depending on holder choice and cutting parameters the insert can be used for both heavier cuts and finishing passes; for specific cycle planning and recommended cutting data, consult Metav Werkzeuge’s technical team. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
TCMT110202-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Combining Tiger·tec Silver coating technology with an optimised FM4 chipbreaker and a stable triangle 60° form delivers reliable machining of stainless steels and heat‑resistant alloys; order the inserts directly via Metav Werkzeuge or consult our specialists for tailored application advice. TCMT110202-FM4 WSM20S — Triangle indexable insert for stainless steels and superalloys by Walter Tools A TCMT110202-FM4 WSM20S indexable insert engineered for demanding turning and boring tasks in stainless steels and heat‑resistant alloys, offering secure chip control and high edge stability. Tiger·tec Silver coating technology Optimised FM4 chipbreaker Triangle 60° form for secure clamping Suited to stainless and heat‑resistant alloys Outstanding process reliability for difficult‑to‑cut materials The combination of the WSM20S grade and Tiger·tec Silver coating focuses on cutting‑edge stability and sustained performance when machining materials that generate heat and tend to work‑harden, such as stainless steels and superalloys. The substrate and coating pairing reduces adhesion and supports consistent chip formation under challenging conditions. For production environments where repeatable surface quality and tool life are priorities, this insert offers a balance between wear resistance and predictable edge behaviour, helping to lower downtime and improve overall throughput. Precise chip control and geometry that protects the cutting edge The integrated FM4 chipbreaker has been designed to manage intermittent and continuous chips typical of high‑alloy materials, promoting short, controllable chip forms that evacuate reliably. The triangle 60° plate form and the corner radius 0.2 mm contribute to a robust cutting edge and allow secure clamping in standard toolholders. These geometry choices reduce the risk of built‑up edge and support stable cutting forces, which in turn benefits dimensional reproducibility and surface finish in serial machining. Practical benefits for workshop integration and process planning With a designation reflecting ISO indexing and a compact plate size, the insert is straightforward to implement in existing turning and drilling toollines. The combination of grade and chipbreaker makes it suitable for operations where tool change intervals and process stability are critical metrics. Selection of suitable cutting data and coolant strategy will further extend tool life; where high temperatures occur, the coating’s thermal resilience maintains edge integrity. For guidance on cutting parameters, Metav Werkzeuge can assist with material‑specific recommendations to get the best from the insert. Contact Metav Werkzeuge for application matching and to secure TCMT110202-FM4 WSM20S inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultancy and fast delivery options Technical data Article number: TCMT110202-FM4-WSM20S-WALTER SKU: TCMT110202-FM4-WSM20S-WALTER Designation: TCMT110202-FM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 11 Plate thickness: 02 Clearance angle: 7° Corner radius: 0.2 mm Plate form: Triangle 60° Tolerance class: M Special features Series: Tiger·tec Silver Chipbreaker: FM4 Grade / application groups: S / M Suitable for: stainless steels and heat‑resistant superalloys Version: T FAQ What materials is this insert designed for? The TCMT110202-FM4 WSM20S insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), covering applications with high thermal loads and work‑hardening tendencies. How does the FM4 chipbreaker improve machining performance? FM4 is engineered to produce short, controlled chips when machining tough alloys, enhancing chip evacuation and reducing the likelihood of built‑up edge, which helps maintain the cutting edge and improve surface finish with the TCMT110202-FM4 WSM20S. What advantages does the triangle 60° form provide? The triangle 60° geometry offers three indexable cutting edges per insert and a secure clamping interface, increasing uptime through economical edge changes and delivering stable performance on the TCMT110202-FM4 WSM20S. Is the Tiger·tec Silver coating beneficial for high‑temperature cutting? Yes, the Tiger·tec Silver coating improves thermal resistance and reduces adhesion on the cutting edge, supporting longer tool life and steady performance when machining materials that generate significant heat. Which corner radius is recommended for finishing and semi‑finishing? The TCMT110202-FM4 WSM20S has a corner radius of 0.2 mm, which is suitable for semi‑finishing and operations where a balance between edge strength and surface quality is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
TCMT110202-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide solution that combines the Tiger·tec Silver technology with a precise 60° triangular geometry for reliable chip control and extended edge life; order directly via Metav Werkzeuge or consult our technical team for application advice. TCMT110202-FM4 WSM30S triangular turning insert, Tiger·tec Silver – Walter Tools The TCMT110202-FM4 WSM30S is a coated carbide triangular insert optimised for turning rostfreier Stahl and heat-resistant alloys, offering a 0.2 mm corner radius and a 7° clearance for consistent finishes in demanding production environments Tiger·tec Silver coating technology FM4 chipbreaker for controlled chips 60° triangular shape for versatile turning 0.2 mm corner radius for fine finishes Consistent cutting in demanding materials The combination of the Tiger·tec Silver coating and a coated carbide substrate provides enhanced thermal stability and wear resistance for machining tough materials. This grade is designed to maintain a stable cutting edge when machining rostfreier Stahl and heat-resistant superalloys, reducing the risk of built-up edge and unscheduled tool changes. The result is predictable tool life and fewer interruptions to the production flow, which supports higher overall process efficiency and repeatable part quality. Geometry that improves surface quality and accessibility A 60° triangular insert form with a 0.2 mm corner radius and a 7° clearance angle delivers a balance between strength and surface finish. The triangular shape allows three usable cutting edges per insert, while the small corner radius is suitable for finishing passes where tighter tolerances and improved surface integrity are required. The modest clearance angle helps avoid rubbing and supports reliable chip evacuation, leading to better surface integrity on turned components and reduced rework rates. Reliable chip control and productivity advantages Equipped with the FM4 chipbreaker, this insert promotes controlled chip formation and safe chip flow in medium to challenging cutting conditions. The grade WSM30S is formulated for applications where heat generation and tough material behaviour demand a resilient edge. That stability translates into longer intervals between indexings and fewer insert changes, supporting continuous, productive machining cycles and lowering per-part tooling costs over time. Contact Metav Werkzeuge for tailored recommendations on machining strategies with Walter Tools inserts and for rapid order fulfilment; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: TCMT110202-FM4-WSM30S-WALTER Designation: TCMT110202-FM4 WSM30S Series: Tiger-tec Silver Grade: WSM30S Data Free angle: 7° Corner radius: 0.2 mm Insert shape: Triangle 60° Size: 11 Thickness: 02 Special features Coating/technology: Tiger·tec Silver Chipbreaker: FM4 Substrate: Coated carbide Applicable material groups: S / M Suitable for: rostfreier Stahl; heat-resistant superalloys and titanium FAQ What materials is this insert suitable for? The TCMT110202-FM4 WSM30S from Walter Tools is suitable for rostfreier Stahl and for heat-resistant superalloys/titanium, reflecting the S and M application groups assigned to the grade. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the TCMT110202-FM4 WSM30S supports controlled chip formation and evacuation, improving process reliability when cutting demanding materials. Can the triangular shape be used for roughing and finishing? A triangular 60° insert provides multiple cutting edges; with a 0.2 mm corner radius the TCMT110202-FM4 WSM30S is particularly well suited for finishing and light to moderate turning passes. What does the Tiger·tec Silver series offer for production runs? Tiger·tec Silver coatings enhance thermal resistance and wear performance; the WSM30S grade benefits from this technology to extend edge life and reduce index changes during longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new article of the manufacturer.
TCMT110202-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a defined 0.2 mm corner radius and the FP4 chipbreaker for consistent chip control and extended tool life in steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. TCMT110202-FP4 WPP10G — Triangle 60° Coated Carbide Insert for Stahl by Walter Tools A TCMT110202-FP4 WPP10G turning/boring insert engineered for efficient machining of Stahl, combining Tiger·tec Gold coating and a dedicated FP4 chipbreaker for reliable performance in general turning operations Tiger·tec Gold coated grade WPP10G Designed for machining Stahl (P) Triangle 60° form for versatile indexing 0.2 mm corner radius for repeatable finishes FP4 chipbreaker for controlled chips Durable grade and coating for productive turning The coated carbide WPP10G grade, part of the Tiger·tec Gold series, is developed for high process stability when machining Stahl. The multi-layer coating reduces flank wear and improves thermal resistance so that flank and crater wear are delayed under typical turning conditions. The combination of grade and coating means the cutting edge is more resistant to abrasion, which in turn supports longer tool life and fewer insert changes. This is particularly relevant in batch production where consistent performance and predictable tool intervals are required. The FP4 chipbreaker contributes to stable chip control, reducing the risk of built-up edge and improving component consistency. Geometry engineered for precision and surface quality The triangular 60° insert geometry with a 7° relief angle and a 0.2 mm corner radius provides a balance between cutting strength and surface finish. A larger corner radius increases edge robustness and helps absorb cutting forces, while the modest radius here preserves the ability to achieve fine surface finishes on shafts and turned faces. The tolerance class M ensures reproducible seating and repeatable results when indexing inserts in the toolholder. For those less familiar with insert geometry: the corner radius influences both the strength of the cutting edge and the micro-finish on the workpiece—this insert is set up to deliver a reliable compromise between the two for general turning tasks in Stahl. Versatility and process reliability for everyday workshop demands As a versatile indexable insert, the design supports flexible use across a range of steel alloys, classified for different wear and toughness levels within the grade specification. The insert’s form factor and chipbreaker are optimised for predictable chips and stable cutting forces, which helps reduce cycle variation and increases throughput. For operations seeking to standardise on a single grade for mixed work orders, the WPP10G grade offers broad machinability across typical steels used in industry. The insert is compatible with common triangular toolholders and is suitable for both roughing and finishing cuts when cutting data is adapted to the workpiece. Walter Tools’ focus on consistent edge stability supports reproducible results and easier process planning. Discuss application-specific cutting data and order assistance with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations on Walter Tools Tiger·tec Gold inserts Technical Data Article number: TCMT110202-FP4-WPP10G-WALTER Designation: TCMT110202-FP4 WPP10G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Triangle 60° Size: 11 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FP4 Material applicability: Stahl (P) Product type: Turning/boring indexable insert FAQ What materials is this insert intended for? The TCMT110202-FP4 WPP10G is designed primarily for machining Stahl (material group P); the Tiger·tec Gold grade is optimised for common unalloyed and alloyed steels. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker on this triangular insert produces controlled chip formation and evacuation, which improves process stability and helps maintain a consistent surface finish. What does the 0.2 mm corner radius mean for finishing? A 0.2 mm corner radius offers a compromise between edge strength and surface quality: it provides sufficient robustness for general turning while allowing good surface finishes on shafts and faces. Is the insert suitable for both roughing and finishing? Yes, the geometry and grade permit flexible use; cutting parameters should be adapted to the specific operation to balance material removal and surface requirements. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold multi-layer coating enhances thermal resistance and wear performance, extending tool life and contributing to more predictable tool-change intervals in steel turning. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is part of the Walter AG product family and belongs to the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
TCMT110202-FP4 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the FP4 chipbreaker and Walter Tools' proven quality for efficient steel machining. Order the TCMT110202-FP4 WPP20G insert directly via Metav Werkzeuge or ask our consultants for tailored application support. TCMT110202-FP4 WPP20G turning insert, triangle 60° (Walter Tools) A TCMT110202-FP4 WPP20G indexable insert engineered for high‑productivity external turning of steel, featuring Tiger‑tec Gold coating and a chipbreaker optimised for P‑group materials. Tiger‑tec Gold coating for extended tool life Optimised FP4 chipbreaker for steel turning Triangle 60° insert with 0.2 mm nose radius Suitable for unalloyed and alloyed steel Longer life and consistent edge performance for steel turning The coated cemented carbide grade from the Tiger‑tec Gold family combines wear resistance and edge stability to increase productive cutting time. The WPP20G chemistry is a universal‑to‑tough variant developed for machining steel under the heat and chip formation conditions typical for group P materials according to ISO 513. The result is a reliable cutting edge that sustains performance across varied operational parameters, which reduces tool changes and supports predictable cycle times. The FP4 chipbreaker is designed to promote short, controllable chips when turning steel, lowering the risk of entanglement and improving process stability. Geometry and clearance tailored for surface quality and strength The triangular 60° form gives three usable cutting edges and a stable support area for heavy feeds; combined with the 0.2 mm corner radius, this geometry balances surface finish and edge robustness. A 7° clearance angle reduces rubbing and cutting forces, so the insert maintains a cleaner cut, better surface finish and reduced tool‑holder load. These features translate into measurable production benefits: consistent part quality, fewer reworks and better utilisation of machine time, making the tooling decision more economical over the full production cycle. Practical compatibility with common holders and clear selection guidance The insert is supplied in the widely used TCMT format and is suitable for standard toolholders that accept triangular 60° indexable inserts. The coated grade and chipbreaker combination is particularly recommended for unalloyed and alloyed steel workpieces, providing good process security and surface quality in a variety of turning applications. For integration into existing tool sets, confirm holder clamping and seat dimensions against the insert designation listed in the technical data. For application optimisation or to determine the best feed and speed windows, Metav Werkzeuge's consultants can provide cutting data and selection advice to match machine capability and workpiece specification. For tailored machining advice or to secure Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TCMT110202-FP4 WPP20G and suitable toolholder combinations Technical data Article number: TCMT110202-FP4-WPP20G-WALTER Designation: TCMT110202-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Clearance angle: 7° Corner radius: 0.2 mm Insert size: 11 Thickness: 02 Tolerance class: M Special features Grade: WPP20G Coating technology: Tiger-tec Gold Chipbreaker: FP4 Insert form: Triangle 60° Execution: T Application group: Steel (ISO P) FAQ What materials is this insert intended for? The insert is designed primarily for steel (ISO group P) workpieces; the WPP20G grade and FP4 chipbreaker deliver controlled chip formation and good wear resistance when machining unalloyed and alloyed steel. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating on the insert improves wear resistance and edge stability, extending tool life and enabling more consistent productivity in steel turning operations. Can the insert be used for finishing and roughing? With a 0.2 mm corner radius and the FP4 chipbreaker, the insert is suited to a balance of finishing and medium‑cut applications; selection of feeds and depths should be matched to the desired surface finish and machining stability. Is the TCMT110202-FP4 WPP20G compatible with standard TCMT holders? The insert follows the TCMT format and fits holders designed for triangular 60° inserts; verify seat and clamping specifications against the designation before assembly. What advantage does the FP4 chipbreaker offer for steel turning? The FP4 chipbreaker is optimised to produce short, manageable chips in steel, improving chip evacuation and reducing the risk of chip interference with the tool or workpiece. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is original and factory‑new.
TCMT110204-FK6 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver wear resistance and the FK6 chipbreaker for stable, productive turning of cast iron; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TCMT110204-FK6 WKK10S — Walter Tools triangular turning indexable insert, FK6 chipbreaker, for cast iron TCMT110204-FK6 WKK10S is a triangular turning insert designed for high-performance machining of cast iron components, offering a robust coated-carbide grade and precise geometry for repeatable results Tiger·tec Silver coating for extended tool life Optimised for cast iron (ISO K) machining Triangle 60° form with 0.4 mm corner radius FK6 chipbreaker for short, controllable chips High wear resistance that extends production uptime The Tiger·tec Silver coating together with the WKK10S grade provides a significant improvement in resistance to abrasive wear when machining cast iron, which translates into longer tool life and fewer tool changes. The combination of a coated carbide substrate and modern coating technology means the insert maintains a stable cutting edge under interrupted cuts and the typical brittle-chip behaviour of cast materials. This reliability helps to reduce unscheduled stops and supports a steady production flow while maintaining machining quality. Improved chip control for safer, faster turning The integrated FK6 chipbreaker is tailored to generate short, consistent chips when cutting cast iron; this reduces the risk of long, entangling swarf and simplifies handling in automated or manual turning operations. The 60° triangular form with a 0.4 mm corner radius produces predictable cutting forces and a favourable chip curl, allowing higher feed rates without compromising surface finish. For process planners, this means fewer interventions and a clearer path to higher throughput. Geometry and relief designed for stable cutting performance A 7° relief angle and the standard insert sizing support secure seating in standard toolholders and stable engagement at the cutting edge. The insert thickness code and size conform to common indexable insert systems, enabling straightforward replacement and inventory management. Clear geometry results in consistent contact conditions, helping to achieve repeatable component tolerances and improved surface integrity in series production. Efficient grade selection and material fit The WKK10S grade is optimised for ISO group K (cast iron), tuned to withstand the abrasive nature of grey and nodular castings and the frequently short, breaking chips associated with these materials. Specifying this grade helps to match tool properties to part material, reducing trial-and-error during process development and supporting faster ramp-up to productive cutting parameters. For machining cast iron with reliable wear performance and consistent chip control, contact Metav Werkzeuge for ordering and tailored application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: TCMT110204-FK6-WKK10S-WALTER Product name: TCMT110204-FK6 WKK10S Manufacturer / Brand: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Facts Corner radius: 0.4 mm Relief angle: 7° Insert form: Triangle 60° Size: 11 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: FK6 Material suitability: Cast iron (ISO K) Material of insert: Coated carbide FAQ Is this insert suitable for grey and nodular cast iron? Yes. The TCMT110204-FK6 WKK10S from Walter Tools is specified for ISO group K and is suitable for both grey and nodular cast iron thanks to the WKK10S grade and Tiger·tec Silver coating. What advantages does the FK6 chipbreaker provide? The FK6 chipbreaker on this insert controls chip form to produce short, manageable chips during cast iron turning, improving safety and facilitating higher productive feed rates. How does the 0.4 mm corner radius affect component finish? A 0.4 mm radius balances edge strength and surface finish: it increases edge robustness under interrupted cuts while still allowing a fine surface quality in turning operations. Can this insert be used in standard toolholders for turning? Yes. The triangular 60° form and common sizing of the TCMT110204-FK6 WKK10S enable secure seating in standard turning toolholders and simplify replacement logistics. What does the Tiger·tec Silver series offer compared with conventional grades? The Tiger·tec Silver series provides enhanced abrasive-wear resistance and thermal stability, which supports longer tool life and consistent cutting performance when machining abrasive cast iron workpieces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer. The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
TCMT110204-FK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, targeted chip control and long tool life to keep cycle times low and component quality consistent — order directly via Metav Werkzeuge or contact our consultants for specialist advice. TCMT110204-FK6 WKK20S — Triangle 60° turning insert for cast iron, Tiger·tec Silver — Walter Tools TCMT110204-FK6 WKK20S is a triangle‑form indexable insert designed for turning and boring applications in abrasive cast iron environments, delivering stable chip formation and long tool life. Tiger·tec Silver coating for durability Optimised for cast iron machining Triangle 60° insert form 0.4 mm nose radius for fine finishing Consistent chip control that reduces rework The geometry and the FK6 chipbreaker are engineered to manage the short, brittle chips typically produced by cast iron. Controlled chip formation minimises the risk of surface damage and tool interruptions, which translates into more predictable cycles and fewer secondary operations. For operators unfamiliar with chipbreaker design: the FK6 profile directs and fractures chips reliably, improving evacuation in both stable and interrupted cuts and helping to maintain surface integrity. Coated carbide grade that extends productive time Belonging to the Tiger·tec Silver family, the WKK20S grade is a coated carbide formulation optimized for abrasive wear encountered when machining cast iron. The coating provides enhanced thermal and wear resistance, so the insert keeps a sharper, usable edge for longer periods. For production planners, this means fewer insert changes per shift and a smoother production flow, supporting consistent component tolerances without frequent tool adjustments. Geometry tuned for precision and repeatability With a triangle 60° form and a 0.4 mm nose radius, this insert balances strength and finish capability. The relatively small nose radius enables fine finishing passes and consistent dimensional control on interrupted surfaces, while the triangular shape provides three usable cutting edges, contributing to cost efficiency per insert. The specified 7° relief angle reduces rubbing and heat at the cutting edge, supporting stable cutting conditions and repeatable outcomes. Practical advantages for workshop integration The insert’s standard designation and dimensions follow common tooling conventions, allowing straightforward toolholder selection and fast replacement. The insert comes in execution code T with tolerance class M, facilitating interchangeability in established tool systems. Shops aiming to streamline tooling logistics benefit from the clear classification and the insert’s versatility within cast iron operations, reducing procurement complexity and setup time. How it supports quality and throughput By combining wear‑resistant coating, targeted chip control and robust geometry the insert helps to raise first‑pass yields on cast iron components. The result is measurable: fewer interrupted cuts, reduced scrap due to surface defects and a lower frequency of tool changes. For manufacturing engineers, the net effect is improved cycle‑time stability and a predictable maintenance rhythm for cutting equipment. Contact Metav Werkzeuge for tailored recommendations on toolholder pairing and batch supply of Walter Tools inserts, and secure optimal performance for cast iron turning applications Technical data Article number: TCMT110204-FK6-WKK20S-WALTER SKU: TCMT110204-FK6-WKK20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WKK20S Facts Relief angle: 7° Nose radius: 0.4 mm Insert form: Triangle 60° Insert size: 11 Plate thickness: 02 Chipbreaker: FK6 Tolerance class: M Special features Coated carbide grade (Tiger·tec Silver) Optimised for cast iron (K) Execution: T Three usable cutting edges (triangle form) Designed for stable chip formation and abrasive wear resistance Manufacturer: Walter Tools FAQ What types of cast iron are suitable for this insert? This TCMT110204-FK6 WKK20S insert is optimised for a broad range of cast iron grades; the WKK20S grade is targeted at abrasive, breakage‑prone chips typical of many grey and nodular cast irons. Can the insert be used for finishing passes? Yes. The 0.4 mm nose radius and the triangle 60° geometry enable fine finishing and consistent dimensional control when using appropriate feeds and speeds with the TCMT110204-FK6 WKK20S by Walter Tools. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKK20S grade increases thermal and wear resistance, extending edge life and supporting longer uninterrupted production runs with Walter Tools inserts. Is this insert compatible with standard triangular turning toolholders? The insert follows common triangular insert dimensions and can be mounted in compatible holders designed for TCMT inserts; ensure the correct clamping and seat geometry for secure positioning. What is the main advantage of the FK6 chipbreaker? The FK6 chipbreaker on this insert promotes consistent fragmentation and evacuation of short, brittle chips in cast iron machining, reducing the risk of surface damage and tool interruption. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-FM4 WMP20G FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise FM4 chip control and a stable 7° relief geometry for reliable stainless steel turning — order directly via Metav Werkzeuge or contact the team for application advice. TCMT110204-FM4 WMP20G indexable turning insert — Tiger·tec Gold, for stainless steel (Walter Tools) A TCMT110204-FM4 WMP20G indexable insert designed for demanding turning and boring operations in stainless steels, offering controlled chip formation and extended tool life. Tiger·tec Gold coated carbide for durability Optimised FM4 chipbreaker for reliable chip control 7° relief angle for reduced cutting forces Triangular 60° form for flexible clamping options High process reliability for stainless steel turning The combination of the Tiger·tec Gold coating and the WMP20G grade provides enhanced wear resistance and consistent edge stability in the machining of stainless steel (ISO group M). The coated cemented carbide substrate supports safe chip formation under medium to robust cutting conditions, which reduces the frequency of edge changes and improves overall process stability. This performance-oriented pairing is suitable for shops that require predictable machining behaviour and lower downtime. Geometry tuned for stable cuts and surface quality The insert’s 7° relief angle together with a 0.4 mm corner radius and its triangular 60° shape results in a robust cutting edge that resists built-up edge formation and vibration. The FM4 chipbreaker is engineered to produce short, manageable chips when turning tough, work-hardening stainless steels, which helps maintain coolant flow and surface finish. These geometric choices translate into fewer interruptions, improved reproducibility and a reliable finish on each workpiece. Productivity and operational benefits in everyday machining As an indexable turning insert from Walter Tools’ Tiger·tec Gold family, this grade focuses on extended tool life and consistent performance, reducing tool-change frequency and supporting higher batch throughput. The insert is particularly suitable where secure chip control and edge integrity are priorities, enabling manufacturers to maintain productivity without sacrificing component quality. For technical queries or to confirm suitability for specific stainless-steel alloys, the supplier can provide machining recommendations and cutting data. Contact Metav Werkzeuge to discuss application tests or to determine how the Walter Tools TCMT110204-FM4 WMP20G insert can increase process security in stainless steel turning operations Technical data Article number: TCMT110204-FM4-WMP20G-WALTER Designation: TCMT110204-FM4 WMP20G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Shape: triangular 60° Size: 11 Grade: WMP20G Special features Series: Tiger·tec Gold Chipbreaker: FM4 Material: coated cemented carbide Application: stainless steel (ISO M) FAQ Is this insert suitable for stainless steel machining? Yes. The TCMT110204-FM4 WMP20G insert is formulated for machining stainless steels (ISO group M) and offers coating and geometry to support secure chip formation and stable cutting. What advantages does the FM4 chipbreaker provide? The FM4 chipbreaker on this Walter Tools insert promotes short, controllable chips and reduces the risk of entanglement, improving machining safety and surface quality in demanding stainless-steel operations. Can the insert be used for finishing and semi-finishing operations? The geometry and 0.4 mm corner radius make the insert appropriate for operations where a balance between cutting strength and surface finish is required; cutting data should be adapted to the specific alloy and component tolerance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is part of the Walter AG group and a recognised provider of precision metalworking tools
TCMT110204-FM4 WMP20S T Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coated grade, a 0.4 mm corner radius and a 7° relief angle for secure chip control and extended cutting performance; order directly via Metav Werkzeuge or ask the consultants for an application match. TCMT110204-FM4 WMP20S – Triangular 60° coated carbide insert (Tiger‑tec Silver) by Walter Tools TCMT110204-FM4 WMP20S is a triangular, coated carbide indexable insert designed for machining stainless steels under medium to robust cutting conditions Tiger‑tec Silver coated carbide for stainless steel Triangular 60° insert with 7° relief angle Reliable 0.4 mm corner radius for robust finishes Suitable for medium to heavy cutting conditions Greater process reliability in stainless-steel machining The combination of the Tiger‑tec Silver coating and the tailored WMP20S grade promotes stable chip formation when machining austenitic and other stainless steels. The coated carbide substrate reduces adhesion at the cutting edge, which lowers the tendency for built-up edge and improves repeatability in serial production. For users requiring steady cycle times and fewer unscheduled tool changes, this insert delivers a consistent cutting geometry that translates directly into predictable component quality and less rework. Consistent surface finish and dimensional control A 0.4 mm corner radius together with the 7° relief angle provides a balanced cutting edge that absorbs intermittent loads and supports smoother engagement across varying feed rates. The triangular 60° geometry allows multiple index positions and a compact cutting edge suitable for turning and boring operations where a reliable finish is essential. These features reduce vibration sensitivity and assist in maintaining tolerances on turned diameters and faces, which is particularly important for components with tight form and surface requirements. Improved economy through longer life and higher productivity The coated grade and chipbreaker FM4 are selected to lower flank wear and improve edge stability under tougher stainless-steel conditions. Improved edge life leads to fewer index changes and lower machine downtime, increasing overall productivity. While not a substitute for correct machining data and coolant strategy, the insert’s design supports more efficient tool utilisation and a reduced tooling footprint in production environments that demand steady throughput and traceable results. Practical application notes and compatibility This indexable insert is intended for machining materials classified in ISO group M (stainless steels) and performs best under moderate to robust cutting parameters. The geometry fits standard turning and boring toolholders that accept triangular TCMT-style inserts and benefits from stable clamping and correct cutter head set-up. For selection between grades or to optimise feeds and speeds for specific stainless-steel alloys, technical consultation is recommended to match cutting data to machine capability and part requirements. Contact Metav Werkzeuge for availability and tailored recommendations on Walter Tools Tiger‑tec Silver inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT110204-FM4-WMP20S-WALTER Designation: TCMT110204-FM4 WMP20S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness designation: 02 Geometry: 60° triangle Special features Grade / coating: Tiger‑tec Silver (WMP20S) Substrate: coated carbide Chipbreaker: FM4 Application group: ISO M (stainless steels) Suitable for medium to heavy cutting conditions FAQ What materials is this insert designed for? This insert is formulated for stainless steels (ISO group M); the WMP20S grade and Tiger‑tec Silver coating optimise chip control and edge stability when machining these alloys. How does the corner radius affect surface quality? A 0.4 mm corner radius provides a robust cutting edge that reduces edge chipping and contributes to a more consistent surface finish under variable cutting loads. Is the insert suitable for both turning and boring operations? Yes, the triangular TCMT geometry and FM4 chipbreaker make the insert suitable for turning and bore-enlargement applications where a compact, indexable cutting edge is required. What role does the Tiger‑tec Silver coating play? The Tiger‑tec Silver coating improves wear resistance and reduces adhesion on the cutting edge, extending tool life and supporting reliable performance in demanding stainless-steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCMT110204-FM4 WSM10S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver grade and the WSM10S coated carbide for stable chip formation and extended edge life in demanding material classes; order directly via Metav Werkzeuge or consult the team for application-specific advice. TCMT110204-FM4 WSM10S — Triangle 60° turning insert, 7° relief, Tiger·tec Silver (Walter Tools) The TCMT110204-FM4 WSM10S turning insert provides a robust solution for finishing and light to medium shoulder turning where consistent edge stability and predictable chip control are required, especially in rostfreier Stahl and heat‑resistant alloys. Tiger·tec Silver grade for high thermal stability WSM10S coated carbide for tough materials FM4 chipbreaker for controlled chip formation Triangle 60° form for secure seating and indexing Predictable chip control for demanding materials The WSM10S grade, part of the Tiger·tec Silver family, is a coated carbide designed to resist the thermal and mechanical stresses typical of rostfreier Stahl and superalloys. The FM4 chipbreaker promotes short, segmented chips that evacuate reliably, reducing the risk of built‑up edge and improving surface finish. For users unfamiliar with ISO group labels: M refers to rostfreier Stahl (stainless materials that tend to be tough and work‑hardening), while S designates superalloys and titanium that demand high heat resistance. The combination of coating technology and chip geometry translates into more stable cutting forces and fewer interruptions in production. Secure seating and extended edge life through geometry The triangular 60° plate form with a 0.4 mm corner radius and 7° relief angle ensures low access interference at shoulders and predictable corner engagement. The insert thickness "02" and compact format enable precise positioning in standard indexable toolholders, while the 0.4 mm corner radius balances edge strength with the potential for fine surface quality. These geometric choices reduce flank wear and support repeatable performance across batches, which is especially valuable when processing components that require consistent dimensional accuracy. Integration into production for reliable results Incorporating this grade and geometry reduces rework and supports higher first‑pass yield in series production. The coated substrate of the insert increases resistance to abrasion and thermal softening, which is particularly beneficial at elevated cutting speeds. As a result, the tool life becomes more predictable and tool change intervals can be planned into the workflow, supporting lean machining strategies and minimising unexpected downtime. The design also facilitates fast index changes thanks to the three‑corner format, keeping tool inventory manageable while preserving flexibility for different turning tasks. Contact Metav Werkzeuge for specific cutting data, insertion geometry checks or sample requests for Walter Tools Tiger·tec Silver inserts — application advice and reviews are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT110204-FM4-WSM10S-WALTER SKU: TCMT110204-FM4-WSM10S-WALTER Designation: TCMT110204-FM4 WSM10S Dimensions / Geometry Relief angle: 7° Corner radius: 0.4 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Design / Special features Series: Tiger·tec Silver Grade: WSM10S Coating: coated carbide Chipbreaker: FM4 Suitable for rostfreier Stahl (ISO M) Suitable for superalloys and titanium (ISO S) Manufacturer: Walter Tools FAQ What materials is this insert suited to? The TCMT110204-FM4 WSM10S insert is formulated for rostfreier Stahl and heat‑resistant superalloys and titanium, providing stable edge life in these demanding groups. What does the FM4 chipbreaker achieve in practice? The FM4 chipbreaker on this Walter Tools insert promotes short, controllable chips that improve surface finish and reduce the risk of built‑up edge during interrupted or continuous cuts. How does the triangular 60° form benefit production workflows? A triangle 60° insert provides three indexable cutting corners and a compact seating footprint, enabling efficient corner changes and minimising tool inventory while ensuring consistent contact with the workpiece. Is the WSM10S grade coated and why is that important? Yes — WSM10S is a coated carbide grade within the Tiger·tec Silver family; the coating increases thermal stability and wear resistance, extending edge life under higher cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
TCMT110204-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger·tec Silver coating, the stable chip control provided by the FM4 chipbreaker, and the precise 7° relief for secure machining of stainless steel and high-temperature superalloys. Order the TCMT110204-FM4 WSM20S insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110204-FM4 WSM20S — Indexable turning insert, Tiger·tec Silver (Walter Tools) The TCMT110204-FM4 WSM20S is a triangular 60° indexable insert engineered for turning operations in stainless steel and heat-resistant superalloys, offering a robust combination of coating and geometry for demanding applications. Tiger·tec Silver coating for wear resistance FM4 chipbreaker for stable chip control 7° relief for reliable edge engagement Triangular 60° insert with 0.4 mm radius Longer tool life through controlled wear and chip stability The WSM20S grade, applied within the Tiger·tec Silver coating family, focuses on thermal resistance and consistent edge performance when machining tough alloys. The coated carbide substrate supports stable chip formation, reducing edge build-up and extending tool life under cyclic temperatures. For processes where heat generation and adhesion are critical — such as machining stainless steel or nickel‑based alloys — the combination of a purpose-designed coating and an optimised FM4 chipbreaker maintains productivity and reduces unplanned tool changes. This results in fewer interruptions and a more predictable tool-change rhythm on production lines. Precision geometry that improves component finish and process security The insert’s geometric settings — a 7° clearance angle and a 0.4 mm corner radius on a 60° triangular platform — are selected to balance cutting strength and surface quality. The modest corner radius supports stable engagement at the cutting edge and helps absorb intermittent loads without compromising dimensional repeatability. The triangular shape allows for multiple indexing positions, which reduces tooling costs per edge and supports uninterrupted machining. In practice, these geometry choices translate into improved surface finishes and consistent tolerances when turning small radii or interrupted cuts. Application versatility and recommendations for challenging materials Designed for material groups S and M, the grade is suitable for heat‑resistant superalloys and stainless steel, where thermal stability and wear resistance are essential. The FM4 chipbreaker promotes coherent chip evacuation in continuous and semi‑continuous turning, lowering the risk of chip-related disruptions. For best results, pair the insert with stable clamping, appropriate cutting fluids or high-pressure coolant where permitted, and feeds geared to the chosen corner radius to preserve edge integrity. The result is a process that offers higher first‑pass yields and reproducible performance across batches. For tailored advice on Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details, tool availability and matching toolholders Technical Data Article number: TCMT110204-FM4-WSM20S-WALTER Designation: TCMT110204-FM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: triangular 60° Size: 11 Thickness: 02 Special features Chipbreaker: FM4 Coating: Tiger·tec Silver Material suitability: S / M (superalloys, stainless steel) Application: turning / indexable insert FAQ Which materials is this insert best suited for? The TCMT110204-FM4 WSM20S insert from Walter Tools is primarily intended for stainless steel and heat‑resistant superalloys (material groups M and S), where its Tiger·tec Silver coating and FM4 chipbreaker offer thermal stability and reliable chip control. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the TCMT110204-FM4 promotes compact and manageable chips, enhancing evacuation and reducing the risk of chip interference in turning operations, which supports a more stable cutting process and consistent surface quality. What are the benefits of the 7° relief and 0.4 mm radius? The 7° relief reduces rubbing behind the cutting edge while the 0.4 mm corner radius balances edge strength and finish. Together they lower the tendency to build up material on the edge and help maintain dimensional accuracy under load. Can the insert be rotated to use other cutting edges? Yes, the triangular 60° format provides multiple indexing positions, enabling economical use of available cutting edges before replacement and supporting continuous production with fewer tool changes. Is this insert part of a recognised series for matching toolholders? Yes, the insert is part of the Tiger·tec Silver family by Walter Tools, allowing easy selection of compatible toolholders and accessories within the same product family for process optimisation. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
TCMT110204-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver grade and the FM4 chipbreaker for stable chip control and extended edge life when machining demanding alloys; the triangular 60° geometry with a 0.4 mm corner radius and 7° clearance delivers predictable cutting behaviour across interrupted cuts. For supply and technical advice, contact Metav Werkzeuge. TCMT110204-FM4 WSM30S – Triangular 60° indexable insert with Tiger·tec Silver coating (Walter Tools) A TCMT110204-FM4 WSM30S indexable insert designed for drilling, boring and turning tasks on stainless steels and heat‑resistant alloys, offering improved edge stability and chip control in heavy‑duty applications Tiger·tec Silver coating for heat resistance Optimised FM4 chipbreaker for stable chips Triangle 60° form with 0.4 mm corner radius 7° clearance for secure cutting geometry Predictable chip control for demanding materials The combination of the FM4 chipbreaker and the Tiger·tec Silver technology provides controlled chip formation when machining materials that tend to form long or snarling chips. The chipbreaker geometry reduces the risk of chip entanglement and maintains consistent evacuation, which in turn lowers the probability of tool damage and improves machine uptime. This results in measurable process stability and fewer interrupts in production, especially when machining stainless steels and heat‑resistant superalloys. Robust cutting edge for higher process security A 0.4 mm corner radius and the coated carbide grade WSM30S increase the resistance of the cutting edge to thermal and mechanical loads. The modest radius supports a compromise between edge strength and surface finish, enabling secure performance on tougher workpieces while maintaining acceptable surface quality. The insert’s 7° clearance angle ensures the cutting geometry remains positive under load, contributing to repeatable tool life and reliable cycle times. Versatile application scope with clear material focus The insert’s substrate and coating combination is engineered for the ISO material groups M and S: that is, rostfreier Stahl (stainless steels) and heat‑resistant superalloys or titanium. In practice, this means the insert is especially suitable for operations where heat generation and workpiece toughness demand thermal stability and a stable cutting edge. The triangular 60° form provides three usable cutting edges per insert, making the tool economical for medium to heavy machining when indexable inserts are preferred. Integration and productivity benefits on the shop floor The standard designation and familiar TCMT form make the insert straightforward to adopt in existing toolholders and turning systems, reducing the need for special fixtures. With the plate size and thickness codes matching common tooling standards, the insert supports rapid replacement and consistent fixture setup. By focusing on process reliability — controlled chips, stable cutting edge and a resilient coating — the component supports higher productivity and fewer unplanned tool changes in daily production. For technical ordering and application guidance on the Walter Tools TCMT110204-FM4 WSM30S insert, contact Metav Werkzeuge for tailored recommendations and fast availability Technical Data Article number: TCMT110204-FM4-WSM30S-WALTER Designation: TCMT110204-FM4 WSM30S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Triangle 60° Plate size: 11 Thickness code: 02 Special features Coating series: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Material groups: stainless steels (M), superalloys / titanium (S) FAQ What materials is this insert intended for? The TCMT110204-FM4 WSM30S insert is specified for ISO material groups M and S, meaning rostfreier Stahl (stainless steels) and heat‑resistant superalloys or titanium, where thermal stability and edge strength are critical. How does the FM4 chipbreaker improve machining? The FM4 chipbreaker on this Walter Tools insert shapes and controls chips to avoid tangling and to support efficient evacuation, which reduces downtime and enhances process predictability during turning, boring or drilling tasks. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver improves heat resistance and wear behaviour on the coated carbide grade WSM30S, extending edge life under high thermal loads and contributing to consistent performance on demanding workpieces. How many cutting edges are available per insert? The triangular 60° geometry offers three usable cutting edges per insert, allowing cost‑effective index changes and predictable re‑use until the cutting edge reaches its wear limit. Is this insert compatible with standard toolholders? Yes, the TCMT form and size follow common insert standards, making the TCMT110204-FM4 WSM30S compatible with standard turning and boring toolholders designed for TCMT inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-FM6 WSM20S T Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating, the FM6 chipbreaker and a compact triangular geometry for consistent chip control and reliable performance in demanding alloys; order the insert directly via Metav Werkzeuge or request advice from their consultants. TCMT110204-FM6 WSM20S — Indexable turning insert, Tiger·tec Silver, FM6 chipbreaker (Walter Tools) A TCMT110204-FM6 WSM20S triangular 60° indexable turning insert engineered for secure chip formation when machining stainless steel and heat‑resistant superalloys. Tiger·tec Silver coated carbide For stainless steel and superalloys Triangular 60° shape, 0.4 mm corner radius Consistent performance on demanding materials The insert's Tiger·tec Silver coating and the WSM20S grade are designed to improve resistance to thermal and mechanical wear when machining stainless steel and heat‑resistant alloys. This combination promotes stable cutting edges and helps to avoid premature build‑up of material on the tool flank, which in turn reduces process interruptions. The result is a more predictable machining cycle and fewer operator interventions, supporting continuous production runs and improved component quality. Predictable chip control and geometry benefits With a FM6 chipbreaker and a triangular 60° geometry, the insert delivers controlled chip formation under medium to heavy cutting conditions. The 0.4 mm corner radius offers a compromise between edge strength and finishing capability, providing enhanced robustness on interrupted cuts while maintaining an acceptable surface finish. The 7° relief angle complements the geometry by reducing rubbing and heat generation at the cutting zone, enabling steady tool life and repeatable results across batches. Process security and economical tool life The coated carbide grade, combined with the insert form factor, supports secure manufacturing of components in materials that are prone to high temperatures and poor thermal conductivity. The solidly engineered grade is suited to operations where stable chip formation and reliable edge retention are decisive for productivity. Using this insert can contribute to reduced rework and lower tool change frequency, which supports overall machining economy and predictable throughput. For technical selection and availability of Walter Tools inserts contact Metav Werkzeuge for expert advice and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT110204-FM6-WSM20S-WALTER Designation: TCMT110204-FM6 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.4 Insert form: Triangular 60° Size: 11 Thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM6 Material groups: S / M Suitable for stainless steel Recommended for heat‑resistant superalloys and titanium FAQ What materials is this insert suited to? The TCMT110204-FM6 WSM20S insert is intended for stainless steel and heat‑resistant superalloys (material groups M and S), offering thermal resilience and stable chip formation for demanding alloys. What are the defining geometry features of the insert? This triangular 60° insert features a 0.4 corner radius and a 7° relief angle; the FM6 chipbreaker is optimised for controlled chips under moderate to heavy cuts when used with the Tiger·tec Silver grade. Can this insert handle interrupted cuts and heavy machining? The combination of the WSM20S grade, the FM6 chipbreaker and the 0.4 corner radius provides increased edge strength suitable for interrupted cuts and robust performance in tougher applications. What is the product SKU for ordering or reference? Reference SKU TCMT110204-FM6-WSM20S-WALTER when enquiring or ordering to ensure the correct Tiger·tec Silver, WSM20S grade insert is supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-FM6 WSM30S T Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WSM30S grade and the FM6 chipbreaker results in stable cutting performance and extended tool life for demanding materials; the triangular 60° geometry plus a 7° relief and 0.4 corner radius supports consistent surface quality in rostfreier Stahl and heat‑resistant superalloys. Order the TCMT110204‑FM6 WSM30S directly via Metav Werkzeuge or request application advice from our consultants. TCMT110204-FM6 WSM30S indexable turning insert — WSM30S grade, FM6 chipbreaker (Walter Tools) TCMT110204-FM6 WSM30S is a triangular insert designed for turning operations in rostfreier Stahl and heat‑resistant superalloys, optimised for stable chip control and edge security Tiger‑tec Silver coating benefits Suitable for rostfreier Stahl and superalloys Triangle 60° form for flexible turning 7° relief with 0.4 corner radius High performance for demanding materials and predictable productivity The WSM30S grade, part of the Tiger‑tec Silver series, is formulated for work on tough-to-machine alloys. By emphasising heat resistance and a stable cutting edge, WSM30S reduces the risk of built-up edge and supports continuous metal removal in rostfreier Stahl and heat‑resistant superalloys. The combination of a coated cemented carbide substrate and an engineered chipbreaker means fewer interruptions for edge changes, which contributes directly to improved process efficiency and predictable output in series production. Geometry that protects the cutting edge and improves surface finish The triangular 60° insert shape with a 7° relief angle and a 0.4 corner radius delivers a balance between edge strength and access to component profiles. The FM6 chipbreaker promotes controlled chip formation across varied depths of cut, helping to avoid long, stringy chips that can damage the machined surface or disturb automated processes. For those new to indexable inserts: the relief angle prevents rubbing, the corner radius determines edge robustness and finish, and the chipbreaker shapes the chip to evacuate reliably from the cutting zone. Reliability, tool life and process security in production environments Constructed for repeatable performance, this triangular insert supports productivity gains through longer cutting intervals and consistent part quality. The coated grade offers wear resistance that translates into measurable tool life improvements under similar cutting conditions, reducing downtime for insert changes. For tailored application strategies—such as optimal insert seatings, toolholder choices and stability requirements—technical advice is available to align machining parameters with the insert’s strengths and the workpiece material characteristics. Practical guidance for integration and inspection When integrating the insert into an existing turning cell, ensure the seat and clamping follow the holder manufacturer’s instructions to preserve insert geometry and tolerance class M. Visual inspection of the cutting edge after initial cuts will reveal whether feed and speed settings require adjustment: stable, even wear indicates correct parameter selection; heavy edge wear or notch formation suggests review of coolant strategy or cutting data. For operations in rostfreier Stahl and high‑temperature alloys, prioritise rigidity and consistent coolant or lubrication to support the coated grade’s heat management properties. Contact Metav Werkzeuge for detailed application suggestions on the Walter Tools TCMT110204‑FM6 WSM30S insert and availability, or request sample trials via info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TCMT110204-FM6-WSM30S-WALTER Label: Drehwendeschneidplatte TCMT110204-FM6 WSM30S Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger‑tec Silver Core measurements Relief angle: 7° Corner radius: 0.4 Plate shape: Dreieck 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FM6 Grade: WSM30S Coating technology: Tiger‑tec Silver Material suitability: S / M Application notes: suitable for rostfreier Stahl; designed for heat‑resistant superalloys and titanium depending on geometry FAQ What materials is this insert intended for? The TCMT110204‑FM6 WSM30S insert is engineered for rostfreier Stahl and for heat‑resistant superalloys (and titanium where geometry permits), as indicated by the WSM30S grade characteristics. How does the FM6 chipbreaker affect machining? The FM6 chipbreaker on this indexable turning insert promotes controlled chip formation and evacuation, reducing the risk of chip interference and supporting consistent surface quality. What does the 0.4 corner radius mean for component finish? A 0.4 corner radius offers a compromise between edge strength and surface finish: it increases edge durability while still allowing good profile definition and acceptable surface roughness in many turning tasks. Is the insert suitable for finishing and roughing operations? Depending on toolholder setup and cutting data, the triangular 60° geometry combined with the WSM30S grade can be applied to both heavy cuts and finishing passes; selection of feed and speed should reflect the workpiece material and desired surface quality. How important is clamping and toolholder rigidity for this insert? Clamping accuracy and holder rigidity are essential to realise the performance benefits of the coated grade and geometry; secure seating preserves tolerance class M and supports repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com