TCMT110204-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Benefit from the combination of Walter Cermet grade WEP10C, the FP4 chipbreaker and precision geometry (triangle 60°, 7° clearance, 0.4 mm corner radius) for stable chip control and repeatable surface quality. Order the insert directly via Metav Werkzeuge or consult the technical team for optimal grade selection. TCMT110204-FP4 WEP10C – Triangle 60° indexable insert for turning and boring, Walter Tools (7° clearance, 0.4 mm radius) The TCMT110204-FP4 WEP10C is a triangle 60° indexable insert designed for precision turning and bore-facing tasks in CNC turning applications, offering a cermet cutting grade balanced for durability and fine finishing. Cermet grade WEP10C for machining durability Triangle 60° geometry for versatile inserts 7° clearance angle for secure cutting engagement 0.4 mm corner radius for fine surface finish Reliable cutting performance with cermet technology The combination of WEP10C cermet and the FP4 chipbreaker delivers consistent chip control and longer tool life, especially where a fine finished surface is required. Cermet grades are designed for high-temperature hardness and wear resistance, which helps maintain a stable cutting edge under continuous operation. This results in reduced rework and more predictable cycle times, supporting efficient production runs with fewer tool changes. Precision geometry that improves surface quality The triangle 60° shape and 7° clearance angle provide secure seating in standard toolholders and allow multiple indexed cutting edges per insert. The 0.4 mm corner radius is optimised for producing a good surface finish while maintaining adequate edge strength for light to moderate depths of cut. These geometric decisions reduce vibration at the cut, which contributes directly to repeatable part tolerances and improved machining consistency. Application scope and handling recommendations Manufactured in the Walter Cermet series, the insert is suitable for a variety of turning and boring operations where fine finish and dimensional consistency matter. The tolerance class M ensures standardised fit in compatible toolholders; the execution code T and chipbreaker FP4 target a balance between chip formation and surface integrity. Material and grade selection should be verified against the product matrix in the catalogue to match the workpiece material and process parameters for optimal performance. For precision-critical turning and boring tasks, request availability of the Walter Tools TCMT110204-FP4 WEP10C from Metav Werkzeuge or contact the Metav technical team for tailored grade recommendations: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: TCMT110204-FP4-WEP10C-WALTER Article designation: TCMT110204-FP4 WEP10C Manufacturer: Walter Tools Series: Walter Cermet Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Tolerance class: M Chipbreaker: FP4 Thickness code: 02 Size: 11 Special features Grade: WEP10C (cermet) Application: turning / boring Execution: T Base designation: TCMT110204-FP4 Material: catalogue-dependent FAQ Which materials are recommended for this cermet insert? The Walter Cermet WEP10C is intended for applications where cermet advantages are required; final material suitability should be checked in the product matrix for the TCMT110204-FP4 WEP10C insert. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, improving process stability and surface quality in standard turning operations. What is the effect of the 0.4 mm corner radius on part finish? A 0.4 mm corner radius gives a balance between edge strength and surface finish, yielding fine machined surfaces while maintaining adequate resistance to edge chipping. Is the insert compatible with standard triangle 60° toolholders? Yes, the triangle 60° geometry and tolerance class M of the TCMT110204-FP4 WEP10C make it compatible with common indexable insert holders designed for triangle inserts. How many cutting edges does the insert provide before indexing? The insert is a triangle 60° shape and offers multiple indexed edges typical for triangular inserts; the exact number of usable edges depends on the applied depth of cut and wear pattern for the TCMT110204-FP4 WEP10C. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer, Walter Tools.
TCMT110204-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WKP01G grade for dependable machining of Stahl and Gusseisen, and precise geometry for consistent chip control. Order the TCMT110204-FP4 WKP01G insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110204-FP4 WKP01G turning/boring indexable insert — Tiger·tec Gold, FP4 chipbreaker A TCMT110204-FP4 WKP01G indexable insert engineered for productive turning and boring on Stahl and Gusseisen with a triangular 60° form and robust chip control Tiger·tec Gold coating for wear resistance WKP01G grade for Stahl and Gusseisen machining Triangular 60° geometry with 0.4 mm corner radius 7° clearance angle for secure, consistent cutting Consistent productivity through a premium coating The combination of the Tiger·tec Gold technology and the WKP01G coated carbide delivers stable cutting performance across medium- to high-volume production. The multilayer coating reduces abrasive wear and helps maintain the cutting edge during extended cycles, which translates into fewer index changes and better overall tool life. For production planners this means a more predictable process window and fewer interruptions for tool changes, supporting continuous operation and cost-efficient part output. Geometry and chip control that improve surface quality The insert’s triangular 60° geometry and chipbreaker FP4 are designed to form short, manageable chips when machining cast and steel components. The 0.4 mm corner radius contributes to a reliable edge for finishing passes while the 7° clearance angle reduces rubbing and heat build-up at the cutting zone. Together these features enhance surface finish and dimensional repeatability, reducing the need for secondary operations and helping to meet tight tolerance requirements on turned components. Application-oriented design for Stahl and Gusseisen Optimised for the material groups denoted by P and K, this indexable insert is suitable for common engineering materials: Stahl (unalloyed and alloyed steels) and Gusseisen. The grade’s balance between toughness and wear resistance supports both continuous and interrupted cuts typical of these materials. For workshop engineers this means a versatile insert that handles diverse part geometries while offering process security and consistent results under varying cutting conditions. For machining specialists seeking reliable productivity and chip control, contact Metav Werkzeuge for tailored recommendations on Walter Tools TCMT110204-FP4 WKP01G inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TCMT110204-FP4-WKP01G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT110204-FP4 WKP01G Walter Tools Grade: WKP01G Series: Tiger·tec Gold Manufacturer: Walter Tools Chipbreaker: FP4 Form: triangular 60° Clearance angle: 7° Corner radius: 0.4 Plate size: 11 Thickness: 02 Tolerance class: M Material code: P / K Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 11 Thickness: 02 Tolerance class: M Special features Tiger·tec Gold coating WKP01G coated carbide grade Suitable for Stahl and Gusseisen Chipbreaker FP4 for short chips Triangular 60° insert form FAQ What materials are suitable for this insert? The TCMT110204-FP4 WKP01G insert is designed for machining Stahl (P) and Gusseisen (K), with the WKP01G grade tuned for the thermal and abrasive conditions typical of those materials. What is the benefit of the Tiger·tec Gold technology? Tiger·tec Gold provides a multilayer coating that improves wear resistance and edge stability, enabling the insert to deliver consistent cutting performance and longer tool life under production conditions. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker produces short, controllable chips on turning and boring operations, reducing chip entanglement and improving surface finish while easing chip evacuation. Is the triangular 60° form suitable for finishing operations? Yes. The triangular 60° geometry with a 0.4 mm corner radius offers a reliable compromise between strength and fine edge definition, supporting finishing and semi-finish passes where dimensional control is important. Which tool holders are compatible with this insert? The TCMT110204-FP4 WKP01G follows the TCMT indexable insert family dimensions; holders designed for TCMT110204-style inserts will accept this product, subject to standard clamping and seat specifications Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The article offered is an original, factory-new product from the manufacturer (Walter Tools).
TCMT110204-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a precise FP4 chipbreaker and a compact triangle form for consistent steel machining; this insert delivers durable cutting performance and stable chip control. Order directly via Metav Werkzeuge or consult the team for application advice. TCMT110204-FP4 WPP10G indexable turning/boring insert by Walter Tools — triangle 60°, for steel TCMT110204-FP4 WPP10G is an indexable turning and boring insert designed for steel machining applications, combining a Tiger‑tec Gold coated carbide grade with a dedicated FP4 chipbreaker for stable cutting and predictable tool life Tiger‑tec Gold coated carbide FP4 chipbreaker for stable chips Triangle 60° insert form 0.4 mm corner radius Optimised for steel (P) Consistent chip control for reliable cycle times The insert’s FP4 chipbreaker is engineered to produce short, controlled chips when machining steel, reducing the risk of entanglement and minimising interruptions. The combination of the chipbreaker geometry with the triangular seating ensures repeatable chip formation across a range of cutting conditions, which translates into fewer stoppages and a steadier production rhythm. For users seeking predictable machining, the controlled chip flow supports higher process stability and easier chip handling at the extraction point. Durable coating and grade for extended tool life The WPP10G grade, part of the Tiger‑tec Gold family, is a coated carbide composition optimised for steel; it balances wear resistance and toughness to withstand typical heat and stress in turning operations. This leads to longer tool life and more consistent part quality between indexings. The coating technology improves thermal management at the cutting edge, helping to maintain edge integrity under sustained loads and contributing to fewer tool changes over a production shift. Geometry designed for precision and versatility The triangular 60° insert form with a 0.4 mm corner radius and 7° clearance angle provides a compact cutting edge suited to general turning and light profiling on steels. The compact corner radius helps achieve a mix of edge strength and fine surface finish, while the 60° geometry allows use in facing and external turning with straightforward seat orientation. The insert’s tolerance class M supports reproducible positioning in standard toolholders, aiding fast changeovers and maintaining dimensional consistency. Application recommendations and process fit This insert is targeted at machining unalloyed and alloyed steels (ISO group P) where a robust, coated carbide solution is required. The balanced properties of the WPP10G grade mean it is suitable for both medium and higher cutting speeds, offering an economic option for batch and continuous workflows. When pairing with suitable toolholders, ensure correct seating for triangular inserts and verify cutting parameters to match material hardness and part geometry for best results. Contact Metav Werkzeuge for tailored Walter Tools advice and to secure the TCMT110204-FP4 WPP10G insert for production: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TCMT110204-FP4-WPP10G-WALTER Designation: TCMT110204-FP4 WPP10G Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Relief angle: 7° Insert form: Triangle 60° Insert size: 11 Plate thickness code: 02 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: FP4 Material application: Steel (P) Coated carbide insert Suitable for turning and boring operations FAQ What material is the TCMT110204-FP4 WPP10G best suited for? The TCMT110204-FP4 WPP10G insert from Walter Tools is optimised for machining steel (ISO group P), offering a balance of wear resistance and toughness for unalloyed and alloyed steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the Walter Tools insert promotes reliable chip segmentation and evacuation, improving process stability and reducing downtime caused by long, stringy chips. What does the 0.4 mm corner radius influence in part quality? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, helping to achieve consistent profiles while maintaining good resistance to chipping in general turning tasks. Is the Tiger‑tec Gold coating suitable for higher cutting speeds? Yes, the Tiger‑tec Gold coating applied to the WPP10G grade enhances thermal and wear performance, making the insert appropriate for medium to higher cutting speeds on steel, depending on setup and workpiece geometry. Can this insert be used for facing operations? The triangle 60° geometry of the insert allows its use in facing and external turning when mounted in compatible toolholders and correctly oriented. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no association between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer Walter Tools.
TCMT110204-FP4 WPP20G T Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the FP4 chipbreaker and a precise 0.4 mm corner radius for consistent performance in steel machining; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT110204-FP4 WPP20G triangle indexable insert – FP4 chipbreaker, Tiger·tec Gold by Walter Tools TCMT110204-FP4 WPP20G is a triangle‑shaped, coated carbide insert designed for productive turning operations and compatible drilling/reaming applications in steel Tiger·tec Gold coated carbide grade WPP20G FP4 chipbreaker for controlled chip formation Triangle 60° form with 0.4 mm corner radius Designed for steel machining, ISO P classification Increased productivity from a wear‑resistant coated grade This insert uses a coated carbide grade developed under the Tiger·tec Gold series to provide stable edge life in typical steel cutting conditions. The coating reduces flank and crater wear, which means longer edge life and fewer indexings during production. For operations where cycle time and tool change frequency affect throughput, the combination of a robust grade and a defined FP4 chipbreaker delivers measurable efficiency gains through reduced downtime and consistent component quality. Predictable chip control and surface integrity The FP4 chipbreaker is engineered for controlled chip formation when turning steels classified under ISO P. Controlled chip flow reduces the risk of entanglement and improves evacuation at moderate to high cutting speeds, helping to maintain a clean cut zone. As a result, surface finish is more consistent and downstream operations such as honing or grinding face fewer variations, which supports reliable process capability and repeatable part quality. Geometry tuned for secure clamping and strength The triangular 60° insert geometry provides three usable cutting edges per insert and a robust seating form for positive clamping in standard toolholders. A 0.4 mm corner radius balances edge strength with the ability to achieve stable cutting profiles; the moderate radius supports interrupted cuts and light finishing passes without sacrificing durability. The insert’s 7° relief angle assists in avoiding rubbing and reduces cutting forces in many turning set‑ups. Application focus and material compatibility Classified for material group P (steel), the grade and geometry favour a broad range of unalloyed and alloyed steels. The insert is therefore suitable for general turning and for operations where a reliable, universal grade is required rather than multiple dedicated grades. By choosing an insert tailored to ISO P materials, users gain the rational advantage of fewer grade swaps and a simplified tooling inventory while maintaining predictable tool life. Contact Metav Werkzeuge to discuss suitability for specific steel grades or to request tool recommendations for the TCMT110204-FP4 WPP20G from Walter Tools at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT110204-FP4-WPP20G-WALTER Designation: TCMT110204-FP4 ISO designation: TCMT110204-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade/sort: WPP20G Chipbreaker: FP4 Facts Insert shape: Triangle 60° Corner radius: 0.4 mm Relief angle: 7° Thickness: 02 Size: 11 Special features Coated carbide grade (Tiger·tec Gold) Optimised for ISO P (steel) applications Three cutting edges per insert Stable chip control for reliable production FAQ What materials is this insert best suited for? The TCMT110204-FP4 WPP20G from Walter Tools is optimised for ISO P materials, i.e. a wide range of unalloyed and alloyed steels. How does the FP4 chipbreaker benefit production? The FP4 chipbreaker provides controlled chip formation for turning steels, improving chip evacuation and reducing downstream interruptions. What are the key geometry specifications to consider? The insert features a triangle 60° form, a 0.4 mm corner radius and a 7° relief angle, combining strength with versatile cutting performance. Can this insert be used for light finishing passes? Yes, the 0.4 mm corner radius and coated grade make the insert suitable for stable finishing where appropriate cutting parameters are applied. Is the insert compatible with standard triangle toolholders? The TCMT110204-FP4 WPP20G fits standard holders designed for TCMT triangular inserts and offers three usable cutting edges per insert. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Optimise turning operations with the Tiger‑tec Gold coating and the FP6 chipbreaker for consistent chip control and extended tool life; the 7° clearance angle and 0.4 mm corner radius deliver accurate finishes on steel components. Order the TCMT110204-FP6 WPP20G directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCMT110204-FP6 WPP20G turning insert, Tiger‑tec Gold, FP6 chipbreaker — Walter Tools TCMT110204-FP6 WPP20G is a triangle 60° indexable insert for turning and boring applications, optimised for steel machining with a coated carbide grade from the Tiger‑tec Gold family. Tiger‑tec Gold coated carbide Designed for steel machining Triangle 60° insert form 0.4 mm corner radius for precision High productivity through controlled chip formation The coated carbide Tiger‑tec Gold grade with the FP6 chipbreaker is engineered for stable and predictable chip control, which reduces interruptions and increases cycle reliability. For industrial turning processes on steel, this combination improves evacuation of swarf and lowers the risk of built-up edge, contributing to longer tool life and fewer insert changes. The result is a measurable uplift in machining efficiency and process stability. Consistent surface quality and dimensional accuracy A 0.4 mm corner radius together with a 7° clearance angle helps to achieve repeatable surface finishes on turned components. The insert’s triangle 60° geometry provides strong edge support for medium to heavy cuts while maintaining the ability to produce precise profiles and shoulders. These design elements together enable improved first-pass quality and reduced downstream rework in production environments. Robust indexable system for reliable handling and set-up The insert is supplied in the TCMT110204-FP6 configuration, allowing straightforward indexing and affordable edge changes within standard toolholders. The coated carbide construction from the Tiger‑tec family offers a balance of wear resistance and toughness tailored to the thermal and mechanical demands of steel machining, ensuring dependable performance under varying cutting conditions. Application focus and material suitability The grade is rated for the machining group P (steel) according to ISO classification, making it suitable for unalloyed and alloyed steels commonly encountered in mechanical engineering. Its combination of coating and geometry supports a wide range of turning tasks — from general turning to finishing passes where consistent surface quality is required. Selection of cutting data should be aligned with workpiece material and machine capabilities for optimum results. Contact Metav Werkzeuge for tailored recommendations on tooling setups and to request the TCMT110204-FP6 WPP20G from Walter Tools; our consultants provide practical advice for production-ready integration. Technical data Article number: TCMT110204-FP6-WPP20G-WALTER ISO designation: TCMT110204-FP6 WPP20G Series: Tiger-tec Gold Grade / Sort: WPP20G Manufacturer: Walter Tools Facts Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: FP6 Tolerance class: M Execution: T Special features Coating technology: Tiger‑tec Gold (coated carbide) Material suitability: Steel (P group) Application: Turning / boring indexable insert Stable chip formation and wear resistance Designed for industrial production environments FAQ What materials is this insert intended for? The TCMT110204-FP6 WPP20G from Walter Tools is specified for the ISO group P — primarily steel, including unalloyed and alloyed steels. How does the FP6 chipbreaker benefit production turning? The FP6 chipbreaker on the TCMT110204-FP6 WPP20G promotes predictable chip formation and evacuation, which reduces interruptions and improves machining continuity. What effect does the 0.4 mm corner radius have on finish? A 0.4 mm corner radius provides a balance between edge strength and surface finish, enabling consistent quality on finishing and semi-finishing passes. Is the Tiger‑tec Gold coating suitable for mixed operations? Yes; the Tiger‑tec Gold coated carbide used in this insert offers a compromise of wear resistance and toughness suitable for a range of turning operations on steel. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TCMT110204-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the FW4 chipbreaker for reliable chip control, longer tool life and consistent results in steel turning; order or request advice via Metav Werkzeuge for specification support or procurement assistance. TCMT110204-FW4 WPP10G indexable turning insert for steel — Walter Tools The TCMT110204-FW4 WPP10G is an indexable turning insert designed for general steel machining, combining a Tiger·tec Gold coated carbide grade with a FW4 chipbreaker for controlled chip formation and stable cutting performance. Tiger·tec Gold coating for extended life FW4 chipbreaker for consistent chip control Triangle 60° with three usable cutting edges 0.4 mm corner radius for balanced surface finish Proven coating and grade for steel turning efficiency The Tiger·tec Gold-based WPP10G grade offers a combination of wear resistance and toughness that is optimised for machining steels classified under ISO P. The coated carbide substrate delivers improved edge stability at the thermal loads typical of steel turning, which translates into longer tool life and fewer insert changes. With a focus on process economy, the coated grade reduces flank wear and supports predictable tool-change intervals, helping to maintain a steady machine cycle time and reduce unscheduled downtime. Geometry engineered for reproducible surface quality and productivity The triangular 60° insert shape provides three usable cutting corners, increasing cost-efficiency per insert. The FW4 chipbreaker is tuned to produce controllable chips across a wide range of cutting conditions, while the 0.4 mm corner radius balances edge strength and surface finish to suit light to medium finishing passes. A clearance angle of 7° reduces rubbing on the flank face, supporting stable cutting forces and consistent dimensional results. These geometric choices together help lower cycle times and simplify process setup in series production. Practical application guidance and compatibility Classified for ISO group P, this insert is recommended for unalloyed and alloyed steel applications where a versatile, wear-resistant grade is required. The insert's design supports a range of operations from general turning to light finishing, enabling shops to standardise on a reliable grade across multiple workpieces. For detailed cutting data and process parameters the manufacturer’s technical sheets should be consulted; for tailored advice on cutting speeds, feeds and depth of cut, Metav Werkzeuge can provide application recommendations and compatibility checks with existing toolholders. For procurement or application consulting on Walter Tools Tiger·tec Gold inserts such as the TCMT110204-FW4 WPP10G, contact Metav Werkzeuge for a personalised recommendation and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT110204-FW4-WPP10G-WALTER Name: Drehwendeschneidplatte TCMT110204-FW4 WPP10G Walter Tools Type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP10G ISO designation: TCMT110204-FW4 WPP10G Facts Clearance angle: 7° Corner radius: 0.4 Plate form: Dreieck 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FW4 Material code: P Suitable material: Steel Execution: T Base material: Coated carbide Designation without grade: TCMT110204-FW4 FAQ What materials is this insert suitable for? The TCMT110204-FW4 WPP10G insert is designed primarily for ISO group P materials, meaning it is suitable for machining steel including unalloyed and alloyed steels. How many cutting edges are available per insert? The triangular 60° shape provides three usable cutting edges per insert, increasing cost-efficiency for the TCMT110204-FW4 WPP10G. What is the advantage of the FW4 chipbreaker? The FW4 chipbreaker on the TCMT110204-FW4 promotes consistent chip formation and evacuation, which stabilises cutting forces and improves surface quality during steel turning. Which corner radius is recommended for finishing operations? The 0.4 mm corner radius offers a compromise between edge strength and surface finish for lighter finishing passes with this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for identification and explanation only; there is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product of Walter Tools.
TCMT110204-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
A cost-effective, high-performance Tiger‑tec Gold grade insert with an FW4 chipbreaker and a 60° triangular form delivers stable, productive machining of steel; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCMT110204-FW4 WPP20G – Turning insert, Triangle 60°, Tiger‑tec Gold by Walter Tools A TCMT110204-FW4 WPP20G turning insert engineered for efficient steel turning applications, combining a coated carbide grade and a dedicated chipbreaker for consistent chip control Tiger‑tec Gold coated carbide grade WPP20G Optimised FW4 chipbreaker for steel machining Triangle 60° form with 0.4 mm corner radius 7° relief angle for stable cutting performance Productive performance from the coating and grade The WPP20G grade, part of the Tiger‑tec Gold series, provides a reliable solution for general steel machining (ISO group P). The engineered coating increases thermal resilience and wear resistance, which means longer tool life and more consistent component quality. With a focus on process efficiency, the coated carbide allows for higher cutting parameters in many turning operations, leading to improved cycle times and reduced tooling costs per part. This section highlights how the grade translates into measurable productivity gains and predictable performance in production environments. Geometry designed to balance edge strength and finish The Triangle 60° geometry with a 0.4 mm corner radius and a 7° relief angle is intended to combine edge robustness with the ability to produce a regular surface finish on steel. A 0.4 mm radius gives increased edge strength compared with very small radii, reducing the risk of chipping in interrupted cuts while still permitting acceptable surface quality. The 60° form provides three usable cutting corners per indexable insert, contributing to economical use of the insert. The FW4 chipbreaker is optimised for the thermal and metallurgical behaviour of steels, improving chip segmentation and evacuation in both continuous and light interrupted cuts. Practical advantages in workshop and production settings The insert’s designation and compact form factor make it straightforward to integrate into standard turning toolholders that accept TCMT inserts. Tolerance class M indicates a balanced manufacturing tolerance suitable for general turning tasks where repeatability and interchangeability matter. For job shops and production lines machining a variety of steels, the combination of a coated grade, dedicated chipbreaker and moderate corner radius reduces set-up iterations and improves first-pass yield. The result is a stable process that supports tighter schedules and predictable throughput. Compatibility, handling and lifecycle considerations Marked as an insert for steel machining, the component is well suited to unalloyed and alloyed steels according to ISO group P. The TCMT110204-FW4 WPP20G insert is indexed for multiple cutting edges and benefits from the wear performance of the Tiger‑tec Gold coating, enabling longer periods between index changes. Correct selection of cutting parameters and coolant strategy will maximise the insert’s service life; selective increases in cutting speed are often possible due to the grade’s thermal properties, while maintaining acceptable surface integrity. For customers evaluating tooling strategies, this insert offers an attractive balance between life, reliability and cost-effectiveness. Discuss turning requirements with Metav Werkzeuge—ask for Tiger‑tec Gold inserts for reliable steel machining and tailored recommendations; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for further technical guidance Technical data Article number: TCMT110204-FW4-WPP20G-WALTER Label: Drehwendeschneidplatte TCMT110204-FW4 WPP20G Walter Tools Product type: Drehwendeschneidplatte / turning insert Series: Tiger‑tec Gold Grade/sort: WPP20G Chipbreaker: FW4 Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 11 Thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Material application: Steel (ISO group P) Manufacturer: Walter Tools Execution/form: T FAQ What materials is this insert suitable for? The TCMT110204-FW4 WPP20G is specified for steel machining (ISO group P) and is designed to handle both unalloyed and alloyed steels with stable chip formation. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on this insert promotes controlled chip segmentation and evacuation during turning, leading to improved surface consistency and reduced risk of chip-related interruptions when machining steel. Which geometry advantages does the triangle 60° form provide? A Triangle 60° insert offers three indexable cutting corners per insert and, with a 0.4 mm corner radius, strikes a balance between edge strength and surface finish for general turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (branded as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, brand-new product of the manufacturer.
TCMT110204-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Achieve dependable turning of stainless steels and heat‑resistant superalloys with the TCMT110204-FW4 WSM20S: a Tiger·tec Silver coated carbide insert with an FW4 chipbreaker and a 0.4 mm corner radius for stable cutting and reliable chip control. Order the insert directly via Metav Werkzeuge or consult the Metav specialists for application support. TCMT110204-FW4 (TCMT110204-FW4 WSM20S) WSM20S Turning insert — Tiger·tec Silver coating, FW4 chipbreaker, for stainless steels and superalloys (Walter Tools) The TCMT110204-FW4 WSM20S is a coated carbide triangle insert engineered for secure material removal in stainless steels and heat‑resistant superalloys, offering a balance of edge stability and chip management in demanding turning operations. Tiger·tec Silver coated carbide for longevity FW4 chipbreaker for consistent chip control Triangle 60° geometry with 0.4 mm corner radius Optimised for stainless steels and superalloys Durable coating for consistent edge life and process stability The Tiger·tec Silver coating and the WSM20S grade combine to provide a coated carbide solution optimised for difficult‑to‑machine alloys. This surface technology increases thermal resistance and wear performance, which translates into more predictable tool life under elevated cutting temperatures. For production environments where downtime is costly, the coating supports stable cutting and reduces the frequency of insert changes, improving overall process efficiency. Geometry and chip control that reduce rework and improve surface integrity The triangle 60° shape with a 0.4 mm corner radius and the FW4 chipbreaker are designed to generate reliable chip forms when turning ductile and work‑hardening materials. The moderate corner radius helps to distribute cutting forces and produce a controlled cutting edge, while the chipbreaker guides swarf away from the cutting zone. Together these features help to lower the risk of built‑up edge and enhance surface finish, especially in interrupted cuts or variable feeds. Application range and machining advantages for stainless steels and superalloys Classified for ISO groups M and S, this insert is suitable for rostfreie Stähle and heat‑resistant superalloys or titanium where conventional grades struggle with heat and edge stability. The insert’s tolerance class M indicates machining performance balanced between form accuracy and robustness, making it suitable for both roughing and semi‑finishing passes. Using the correct feed and cutting speed reduces thermal load on the edge and maximises the benefit of the Tiger·tec Silver technology. Practical setup guidance to achieve repeatable results A modest 7° clearance angle and the insert thickness coded as 02 ensure compatibility with a broad range of toolholders; verify holder seat and clamping to maintain runout within specification. Select speeds and feeds according to the workpiece alloy and machine rigidity: lower cutting speeds and slightly higher feeds often reduce heat concentration on the cutting edge for stainless steels. For process development, document the achieved tool life and surface quality to refine cutting parameters and secure reproducible productivity gains. For robust turning of stainless steels and superalloys, request application advice from Metav Werkzeuge or order the TCMT110204-FW4 WSM20S directly via Metav Werkzeuge; eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TCMT110204-FW4-WSM20S-WALTER Label: Drehwendeschneidplatte TCMT110204-FW4 WSM20S Walter Tools Product type: Turning insert Brand: Walter Tools Numbers / Core technical data Size: 11 Thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Tolerance class: M Designs / Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FW4 Geometry: Triangle 60° Material suitability: rostfreie Stähle (M), superalloys/titanium (S) FAQ What materials is this insert designed for? The TCMT110204-FW4 WSM20S is specified for rostfreie Stähle (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), combining coating and grade to cope with high thermal stress. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker promotes consistent chip shapes and evacuation, reducing the likelihood of entanglement and improving process stability during turning with the Walter Tools insert. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius, which balances strength and surface quality—larger radii improve edge robustness, while smaller radii enable finer finishing. Is the insert compatible with standard toolholders? The geometry (triangle 60°) and thickness code (02) are standard for many turning holders; correct clamping and seat condition are essential to preserve dimensional accuracy and tool life. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver increases thermal resistance and wear performance, supporting longer intervals between indexings and more reliable outcomes in demanding turning tasks. Protected trademarks and trade names belong to their respective owners. Brand names are used for explanation only; there is no affiliation or partnership implied. The offered item is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; contact available via official channels.
TCMT110204-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver grade and the MK4 chipformer to secure stable chip control and extended tool life in cast-iron turning operations; order the insert directly via Metav Werkzeuge or consult the team for selection support. TCMT110204-MK4 WKK10S turning indexable insert — triangle 60°, 0.4 mm corner radius (Walter Tools) A TCMT110204-MK4 WKK10S indexable insert engineered for productive turning and boring of cast iron components in demanding industrial machining environments. Tiger·tec Silver coated for high wear resistance Optimised MK4 chipformer for reliable chip control Triangle 60° shape, 0.4 mm corner radius Increase throughput with predictable tool life and chip control The coated carbide grade delivers a clear productivity benefit: Tiger·tec Silver combined with the WKK10S substrate offers improved wear resistance specifically tuned for abrasive cast-iron materials. The MK4 chipbreaker shapes short, brittle chips consistently, reducing interruptions from chip jams and enabling uninterrupted production cycles. This results in fewer tool changes and a lower cost per component, while maintaining surface quality and dimensional stability in serial machining. Precise machining results with geometry tuned to ferrous cast materials The triangular 60° insert geometry and a 0.4 mm corner radius give a balance between strength and edge definition, which is particularly advantageous when machining grey and nodular cast irons. The moderate rake and 7° free angle support stable cutting forces and predictable tool behaviour. For process planners, this means reproducible tool offsets and stable cycle times, even when encountering varying casting grades or interrupted cuts. Practical advantages for workshop integration and tool management The insert’s format (designation TCMT110204-MK4 WKK10S) fits common toolholders and tool management systems used in turning centres, simplifying inventory and tool-change routines. The optimised chip control lowers the need for complex chip evacuation setups, while the robust coating reduces edge degradation under high-abrasion conditions. For operations seeking rapid ramp-up and consistent output, this combination supports lean workflows and reliable daily performance. Application guidance and selection rationale Designed primarily for cast-iron machining, the WKK10S grade is matched to the specific wear mechanisms of these materials: abrasive wear and frequent short-chip formation. When replacing uncoated or general-purpose grades, expect improved life and surface integrity on typical workpiece geometries. For mixed-material cells or non-cast-iron tasks, consult technical documentation to compare grades; the current specification is optimised for cast iron as the principal application. For tailored tool recommendations or to order Walter Tools inserts like the TCMT110204-MK4 WKK10S, contact Metav Werkzeuge for prompt advice and availability — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: TCMT110204-MK4-WKK10S-WALTER Designation: TCMT110204-MK4 WKK10S Brand: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Chipformer: MK4 Application: Cast iron Facts Free angle: 7° Corner radius: 0.4 mm Inscribed circle: 11 Thickness: 02 Special features Coating: Tiger·tec Silver Material group: K (cast iron) Plate form: Triangle 60° Execution: T Tolerance class: M FAQ What materials is this insert intended for? The TCMT110204-MK4 WKK10S is designed primarily for machining cast iron, with the WKK10S grade and Tiger·tec Silver coating optimised for abrasive wear typical of such materials. How does the MK4 chipformer benefit production? The MK4 chipformer shapes short, brittle chips consistently, improving chip control and reducing machine stops, which enhances process reliability for Walter Tools turning inserts. Which insert geometry provides the best balance between edge life and finish? The triangular 60° shape with a 0.4 mm corner radius offers a compromise between edge strength and surface finish, suitable for many cast-iron turning tasks using the TCMT110204-MK4 WKK10S. Is the insert compatible with standard toolholders? Yes, the TCMT110204-MK4 format matches common turning toolholders used in industrial lathes and turning centres, facilitating straightforward integration into existing tooling systems. What measurable benefits can be expected when switching to this grade? Users typically observe improved wear resistance and fewer tool changes due to the Tiger·tec Silver coating and WKK10S grade, leading to more consistent cycle times and reduced downtime. The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no relationship between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Tools; Tübingen; Germany
TCMT110204-MK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the proven combination of wear-resistant Tiger·tec Silver coating, a precise MK4 chipbreaker and a compact triangular form for steady chip control and long tool life; order the insert directly via Metav Werkzeuge or ask the consultants for application support. TCMT110204-MK4 WKK20S turning insert (triangular 60°, Tiger·tec Silver) by Walter Tools The TCMT110204-MK4 WKK20S is a triangular turning insert designed for productive machining of cast iron components, offering a balanced combination of wear resistance and reliable chip control for consistent process results Tiger·tec Silver coating for high wear resistance MK4 chipbreaker optimised for short chips 7° clearance angle for robust cutting action 0.4 mm nose radius for fine surface finishes Increased productivity through optimised wear behaviour The combination of a Tiger·tec Silver coating and a dedicated WKK20S grade reduces abrasive wear when machining cast iron, which translates into longer cutting edge life and fewer changeovers. The coating technology creates a thermal and tribological barrier that slows crater and flank wear; this means more stable cutting conditions and a higher usable cutting length per edge. For production-oriented workshops, this improvement in tool life yields a direct efficiency gain and helps maintain consistent cycle times across batches. Reliable chip control and process security Equipped with the MK4 chipbreaker, the insert delivers controlled, short chips that evacuate reliably in interrupted or continuous cutting of grey and nodular cast irons. The triangular 60° geometry provides three indexable cutting edges, increasing cost-efficiency per edge while ensuring secure clamping. The modest 7° clearance angle supports robust cutting without compromising edge strength, and the 0.4 mm nose radius is suitable for achieving improved surface quality on shafts and housings without excessive cutting forces. These features together support predictable results and reduce rework. Practical application guidance and workshop benefits The insert is tailored to the demands of cast-iron machining: it responds well to the typically abrasive chip conditions and the frequent short-chip formation found in such materials. As part of the Tiger·tec Silver series, the grade WKK20S offers a universal, tough performance class for jobs requiring a balance between wear resistance and fracture resistance. For engineers seeking process stability, the insert simplifies tooling decisions and supports standardised machining parameters across similar workpieces, contributing to fewer machine stops and a more efficient workflow. Contact Metav Werkzeuge for application recommendations and to source Walter Tools inserts designed for cast iron machining Technical data Article number: TCMT110204-MK4-WKK20S-WALTER Designation: TCMT110204-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK20S Shape: Triangle 60° Chipbreaker: MK4 Clearance angle: 7° Nose radius: 0.4 Plate size: 11 Thickness: 02 Tolerance class: M Facts Clearance angle: 7° Nose radius: 0.4 mm Plate size: 11 mm Thickness: 02 Tolerance class: M Special features Tiger·tec Silver coated carbide Suitable for cast iron machining MK4 chipbreaker for short chips Triangular 60° form with three cutting edges Grade suited to abrasive, short-chip conditions FAQ What materials is this insert intended for? This insert is designed primarily for machining cast iron; the WKK20S grade and Tiger·tec Silver coating are tuned to resist abrasive wear typical of cast materials How does the MK4 chipbreaker influence machining? The MK4 chipbreaker produces short, controllable chips that improve evacuation and reduce the risk of entanglement during turning operations with cast iron workpieces Can the insert be indexed to use all cutting edges? Yes, the triangular 60° form provides three indexable edges, allowing efficient use of each insert before replacement Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TCMT110204-MM4 WMP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, optimised MM4 chip control and a compact triangle geometry for reliable machining of stainless steel; order through Metav Werkzeuge or consult the team for application advice. TCMT110204-MM4 WMP20G triangle insert for stainless steel – Walter Tools The TCMT110204-MM4 WMP20G is a triangle turning insert engineered for medium to robust machining of stainless steel, offering a balance of edge stability and consistent chip control. Tiger·tec Gold coating technology MM4 chipbreaker for controlled chips Triangle 60° form for versatile turning 7° relief angle for secure cutting Reliable machining of stainless steel with stable edges The Tiger·tec Gold grade delivers a coated carbide formulation designed to manage the specific challenges of stainless steel, notably workpiece toughness and heat generation. The combination of a wear-resistant grade and a precisely defined corner radius (0.4 mm) protects the cutting edge against premature failure and reduces the risk of built-up edge. This leads to more predictable tool life and consistent surface finish, which supports process stability in batch production or demanding single-part runs. The WMP20G composition aims to maintain a secure cutting edge under medium to robust conditions, reducing unplanned downtime. Higher productivity through optimised chip control and geometry The MM4 chipbreaker is engineered to break and evacuate chips effectively when turning stainless steel, lowering the risk of re-cutting and improving surface integrity. Combined with the triangle 60° insert shape, this geometry allows for flexible approach angles and easy indexing, which increases usable cutting edges per insert and reduces tooling costs per component. The small corner radius (0.4 mm) supports controlled engagement in finishing passes while the 7° relief helps maintain stable cutting forces, contributing to reproducible cutting conditions and predictable cycle times. Practical benefits in workshop integration and tool handling Compact dimensions (inscribed circle 11 mm, thickness code 02) and standard indexability make the insert straightforward to fit into common toolholders, simplifying inventory and tool change procedures. The coated carbide grade within the Tiger·tec Gold family provides improved wear resistance and thermal stability compared with uncoated alternatives, which is particularly beneficial when machining materials prone to smearing or work hardening. These properties translate into fewer operator interventions, more consistent part quality and a more efficient machining workflow overall. For machining stainless steel with the Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge for immediate availability and tailored application support: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TCMT110204-MM4-WMP20G-WALTER Designation: TCMT110204-MM4 WMP20G Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WMP20G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Inscribed circle / plate size: 11 mm Plate thickness (code): 02 Tolerance class: M Special features Shape: Triangle 60° Chipbreaker: MM4 Coating / technology: Tiger·tec Gold (coated carbide) Material group suitability: M (stainless steel) Execution: T Material code: M FAQ What materials is this insert suitable for? The TCMT110204-MM4 WMP20G by Walter Tools is specified for machining stainless steel and is optimised for medium to robust conditions in that material group. What does the MM4 chipbreaker provide in practice? The MM4 chipbreaker on this insert improves chip fragmentation and evacuation when turning stainless steel, which supports consistent surface quality and reduces the chance of chip-related interruptions. How does the Tiger·tec Gold technology benefit tool life? Tiger·tec Gold coating increases thermal stability and wear resistance, helping the Walter Tools grade WMP20G to maintain a reliable cutting edge under the elevated temperatures typical when machining stainless steel. What is the advantage of the triangle 60° form? The triangle 60° geometry offers multiple indexing positions and adaptability to different turning angles, which increases the number of usable edges and simplifies stocking and handling. Is the corner radius suitable for finishing passes? With a corner radius of 0.4 mm, the insert balances edge strength and the ability to produce fine surface finishes, making it appropriate for light to medium finishing operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-MM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for secure chip formation and extended cutting-edge life; this reduces rework and keeps production steady. Order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. TCMT110204-MM4 WSM20S — Triangle 60° Turning Indexable Insert, Tiger·tec Silver — Walter Tools TCMT110204-MM4 WSM20S is a triangular turning indexable insert optimised for machining rostfreier Stahl and heat‑resistant alloys in demanding turning and boring operations. Tiger·tec Silver coating for high process security WSM20S grade for rostfreier Stahl and superalloys Triangle 60° form for three usable cutting edges Chipbreaker MM4 for controlled chip formation Consistent performance in rostfreier Stahl and superalloys The WSM20S grade, part of the Tiger·tec Silver series, is a coated carbide designed for challenging materials such as rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S). The coating enhances heat resistance and adhesion behaviour at the cutting edge, which results in stable chip formation and longer tool life. For production environments where material toughness and thermal load are high, the combination of coating and grade translates into fewer tool changes and improved uptime. Predictable chip control and surface quality The MM4 chipbreaker is engineered to produce consistent chip formation under the high heat and strain typical of machining stainless steels and nickel‑base alloys. The triangular 60° plate form provides three indexable cutting edges per insert, enabling rapid index changes and efficient tool use. With a corner radius of 0.4 mm, operators can expect a balance between strength at the edge and the ability to achieve a fine surface finish; this geometry supports both roughing and mixed finishing passes while maintaining dimensional stability. Geometry and tolerance for repeatable turning Key geometric features—clearance angle 7°, triangle 60° profile and the plate thickness designation 02—combine to give repeatable clamping and consistent contact conditions at the tool‑workpiece interface. The insert is produced to tolerance class M, ensuring interchangeability and predictable results across batches. These characteristics reduce setup variance and support process standardisation, which is essential for series production and quality control in metalworking. Application focus and process benefits Designed for heavy‑duty machining of rostfreier Stahl and, depending on insert geometry, titanium and other high‑temperature alloys, this turning insert supports high process security and a reliable cutting edge under thermally aggressive conditions. The practical benefits are clear: improved productivity through longer tool life, reduced scrap rates due to consistent chip control, and straightforward inventory management thanks to a well‑defined ISO designation and proven Walter Tools quality. Contact Metav Werkzeuge to discuss suitability for specific materials, secure the right quantities and integrate these inserts into your turning process efficiently Technical data Article number: TCMT110204-MM4-WSM20S-WALTER Designation: TCMT110204-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Shape: Triangle 60° Chipbreaker: MM4 Clearance angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate thickness: 02 Tolerance class: M Material applicability: S / M Execution: T SKU / UID: TCMT110204-MM4-WSM20S-WALTER Facts Corner radius: 0.4 mm Clearance angle: 7° Plate form: Triangle 60° Plate size: 11 (designation) Plate thickness: 02 (designation) Tolerance: M Special features Coated carbide insert Part of the Tiger·tec Silver series Grade optimised for rostfreier Stahl and superalloys (ISO M, S) Triangle 60° offers three indexable edges Chipbreaker MM4 for controlled chips FAQ What materials is this insert suitable for? The TCMT110204-MM4 WSM20S turning insert (Walter Tools) is designed for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering enhanced heat resistance and stable cutting edges for these materials. How does the Tiger·tec Silver series benefit machining? The Tiger·tec Silver coating improves thermal resistance and reduces adhesion at the cutting edge, which helps the insert maintain stable chip formation and extended edge life during aggressive machining. What does MM4 chipbreaker deliver in practice? The MM4 chipbreaker produces predictable, controllable chips under high thermal load, lowering the risk of built‑up edge formation and promoting consistent surface finish during both roughing and mixed finishing. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius strikes a balance between edge robustness and surface finish capability, allowing for controlled cutting forces while offering the possibility of fine surface quality in follow‑up passes. Can this insert be used for boring and turning applications? Yes, the insert is specified as a turning/indexable insert suitable for boring and external turning operations where the plate form and grade match the application demands. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only; no connection between our company and the named brands is implied. The offered article is an original, brand‑new product from the manufacturer.
TCMT110204-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a precise MP4 chipbreaker for reliable steel machining with consistent tool life; the triangular 60° form and 0.4 mm corner radius ensure secure cutting-edge engagement and predictable surface finish. Order the insert directly via Metav Werkzeuge or contact their consultants for application advice. TCMT110204-MP4 TCMT110204-MP4 WPP10G – indexable insert for steel, Tiger‑tec Gold (Walter Tools) TCMT110204-MP4 WPP10G is an indexable turning/boring insert engineered for machining steel with a Tiger‑tec Gold coated carbide grade for high productivity Tiger·tec Gold coated carbide grade WPP10G Designed for steel machining (P group) Triangle 60° insert, 0.4 mm corner radius MP4 chipbreaker for stable chip control Consistent productivity through advanced grade and coating The coated carbide grade WPP10G from the Tiger‑tec Gold series is formulated for machining steel (ISO group P), offering a balanced combination of wear resistance and toughness. This results in extended tool life and fewer index changes during batch runs, which supports higher uptime and lower process costs. The coating reduces flank wear and improves thermal stability under the cutting temperatures typical for steel turning, contributing directly to more predictable component quality. Stable chips and surface quality with an MP4 chipbreaker The MP4 chipbreaker geometry actively controls chip formation and evacuation, reducing the risk of entanglement and workpiece damage. By shaping the chip into manageable segments, the insert helps maintain a steady metal removal rate and supports consistent surface finish across the workpiece. For operators less familiar with chipformer terminology: a chipbreaker is a groove or form on the rake face that guides and snaps chips—here optimised for steel to prevent long, stringy chips and support safe automated processes. Geometry that supports secure cutting and repeatability The triangular 60° insert shape with a 0.4 mm corner radius and a 7° clearance angle delivers a secure cutting edge for a range of turning and boring operations. The compact geometry provides good rigidity in the toolholder, which is beneficial for interrupted cuts and variable engagement depths. Tolerance class M indicates a consistent manufacturing standard for predictable fitting in clamping systems. The insert’s size designation 11 and plate thickness 02 correspond to standard holder interfaces for straightforward integration into existing tool setups. Economic advantage and application fit Selecting this insert supports efficient machining strategies by combining a robust grade with an effective chipbreaker—reducing cycle interruptions and the need for secondary finishing. The design suits serial production where repeatable performance on steel is required; fewer variances in tool life translate into easier process planning and inventory control. The Walter Tools heritage in cutting tools underpins the component’s engineering intent: stable cutting edges, consistent results and strong suitability for industrial turning tasks. For durable, high-output steel turning, request the Walter Tools TCMT110204-MP4 WPP10G insert from Metav Werkzeuge; for material- or process-specific recommendations contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT110204-MP4-WPP10G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT110204-MP4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning/boring insert Series: Tiger‑tec Gold Grade: WPP10G ISO designation: TCMT110204-MP4 WPP10G Designation without grade: TCMT110204-MP4 Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Size: 11 Plate thickness: 02 Tolerance class: M Special features Coating/series: Tiger‑tec Gold Chipbreaker: MP4 Suitable for: Steel (ISO group P) Execution: T Material code: P FAQ Is this insert suitable for stainless steel? The insert is specified for steel (ISO group P); it is optimised for unalloyed and alloyed steels rather than stainless steel. What does the WPP10G grade offer compared with standard grades? The WPP10G grade from the Tiger‑tec Gold family provides a coated carbide balance of wear resistance and toughness tailored to steel machining, offering longer life in many turning applications. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker produces segmented chips for safer evacuation and improved surface consistency, reducing the likelihood of chip-related interruptions. Which toolholders accept this insert form and size? The triangular 60° form and size 11 correspond to common indexable turning/boring holders that accept TCMT geometry; check holder compatibility with the TCMT110204-MP4 designation. What is indicated by tolerance class M? Tolerance class M denotes the manufacturing tolerance band for dimensional consistency, aiding predictable clamping and repeatable positioning in the toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. Protected trademarks and trade designations are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product from the manufacturer.
TCMT110204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from a combination of high process reliability, versatile material compatibility and controlled chip formation for continuous production. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. TCMT110204-MP4 WPP20G indexable insert for boring and turning by Walter Tools — Tiger·tec Gold, MP4 chipbreaker The TCMT110204-MP4 WPP20G is an indexable cutting insert designed for precision boring and turning operations, optimised for machining Stahl and engineered to deliver consistent tool life under varied cutting conditions. Tiger·tec Gold coating increases tool life Universal WPP20G grade for Stahl machining MP4 chipbreaker for reliable chip control Triangle 60° form with 0.4 mm corner radius Boosted productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP20G carbide grade provides a stable cutting edge that enhances productivity and reduces unplanned tool changes. The coated hardmetal composition is selected for balanced wear resistance and toughness, meaning fewer interruptions during batch production. As a result, machining cycles run more predictably and process stability improves, which supports efficient operation on shop floors where consistent output is essential. Improved surface finish and dependable chip control The MP4 chipbreaker, together with the 0.4 mm corner radius and 7° relief angle, stabilises chip formation and contributes directly to surface quality in turning and boring. The Triangle 60° geometry provides three effective cutting edges per index, reducing tooling cost per edge. Controlled chip evacuation lowers the risk of recutting and rework, while the modest corner radius helps maintain dimensional accuracy on shoulders and external profiles. Seamless integration and versatile application for Stahl Specified to ISO-relevant groupings, the insert is intended primarily for Stahl applications and suits a wide range of unalloyed and alloyed steels. The tolerance class M, insert size 11 and thickness code 02 ensure predictable fit in standard toolholders, allowing straightforward interchange in existing tooling systems. For manufacturers seeking economical, repeatable machining with good edge life and broad material coverage, this indexable solution supports both small-batch flexibility and high-volume runs. For reliable, high-productivity turning choose Walter Tools' TCMT110204-MP4 WPP20G and contact Metav Werkzeuge for application advice or to arrange supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TCMT110204-MP4-WPP20G-WALTER Designation: TCMT110204-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness code: 02 Tolerance class: M Features & applications Chipbreaker: MP4 Insert shape: Triangle 60° Execution: T Application: boring and turning indexable insert Material application: Stahl FAQ Which materials is this insert suited for? The TCMT110204-MP4 WPP20G is designed primarily for machining Stahl according to ISO material group P and performs well on a broad range of unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and edge stability, enhancing tool life and process reliability during continuous turning and boring operations. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes consistent chip formation and evacuation, improving surface finish and reducing the likelihood of chip-related interruptions in turning cycles. What does the 0.4 mm corner radius mean for component quality? A 0.4 mm corner radius offers a balance between cutting-edge strength and fine surface finish, suitable for most finishing and semi-finishing operations where dimensional control is required. How is the insert identified for ordering or replacement? Use the designation TCMT110204-MP4 WPP20G or the SKU TCMT110204-MP4-WPP20G-WALTER to ensure the correct Tiger·tec Gold grade and geometry are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-MP6 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a high-performance combination of Tiger·tec Gold coating and the MP6 chipbreaker for reliable steel machining; the triangular 60° form with a 7° clearance and 0.4 mm nose radius ensures consistent surface finish and tool life. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. TCMT110204-MP6 WPP10G Drehwendeschneidplatte by Walter Tools — triangular 60°, grade WPP10G for steel machining TCMT110204-MP6 WPP10G is a triangular turning insert designed for robust, repeatable performance in steel turning operations, combining a Tiger·tec Gold coating with an MP6 chipbreaker for stable chip control. Tiger·tec Gold coated grade WPP10G MP6 chipbreaker optimised for steel Triangular 60° insert form 7° clearance and 0.4 mm nose radius Improved machining stability and predictable tool life The combination of a Tiger·tec Gold coating and the WPP10G grade provides enhanced wear resistance and heat management during steel turning. The coating reduces flank wear and lowers thermal softening, which translates into more predictable tool life and fewer unscheduled tool changes. In practical terms, this stability reduces downtime and improves process reliability in batch and continuous turning operations, especially where consistent surface quality is required. Precise chip control for efficient material removal Equipped with the MP6 chipbreaker, the insert delivers controlled chip formation when turning steels. The chip geometry and breaker design promote short, segmented chips under a wide range of cutting conditions, reducing the risk of entanglement and improving evacuation in medium-depth cuts. This results in safer machining, simpler chip handling and a smoother workflow on automated lathes and manual turning centres. Geometry designed for repeatable surface quality The triangular 60° form and the specified 7° clearance flank angle give the insert good strength at the cutting edge while allowing favourable cutting attitudes for external and light profiling tasks. The 0.4 mm nose radius balances edge robustness and surface finish, enabling improved part tolerances without sacrificing edge life. For jobs requiring consistent dimensional accuracy, the geometry contributes to repeatable results across series production. Application focus and material suitability This grade is engineered for the ISO group P — namely steels — and is tuned to the typical heat generation and chip formation of these materials. The insert is particularly suitable for general steel turning where a mix of wear resistance and toughness is needed. When selecting parameters, pairing the insert with appropriate cutting speeds and feeds for the steel grade ensures efficient material removal rates while preserving the cutting edge. Contact Metav Werkzeuge for tailored cutting recommendations and quick supply of Walter Tools TCMT110204-MP6 WPP10G inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT110204-MP6-WPP10G-WALTER Product type: Drehwendeschneidplatte Designation: TCMT110204-MP6 WPP10G Brand: Walter Tools Series: Tiger-tec Gold Facts Clearance angle: 7° Nose radius: 0.4 mm Inscribed circle: 11 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G Chipbreaker: MP6 Suitable for: Steel (P) Insert shape: Triangle 60° Edge type: T FAQ What materials is this insert best suited for? The TCMT110204-MP6 WPP10G insert is formulated for ISO group P materials; it is optimised for steel turning with a grade and coating that balance wear resistance and toughness. How does the MP6 chipbreaker improve machining? The MP6 chipbreaker on the TCMT110204-MP6 WPP10G promotes short, controllable chips during steel turning, improving safety and chip evacuation for more efficient production. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on this insert reduces flank wear and improves heat resistance, which supports longer tool life and more consistent surface finish in serial turning operations. Which geometrical features help achieve dimensional accuracy? The triangular 60° form, 7° clearance and 0.4 mm nose radius are combined to offer a robust cutting edge with good surface finish capability, aiding repeatable part tolerances. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
TCMT110204-MP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, Tiger‑tec Gold wear resistance and compact triangular geometry for consistent turning performance; order genuine inserts via Metav Werkzeuge or consult the technical team for application advice. TCMT110204‑MP6 WPP20G triangle turning insert for steel — Walter Tools TCMT110204‑MP6 WPP20G is a triangular turning insert designed for efficient steel machining, providing stable cutting performance in mixed production environments Triangle 60° geometry for stable cutting Tiger‑tec Gold coating for high wear resistance MP6 chipbreaker optimised for steel machining Higher productivity through controlled chip formation and wear resistance The Tiger‑tec Gold grade WPP20G delivers a balance of wear resistance and toughness that extends edge life under typical steel cutting conditions. The MP6 chipbreaker is engineered to produce predictable chips and reduce interruptions for chip disposal, which improves cycle consistency and machining uptime. For mixed turning tasks the coated carbide composition offers a reliable compromise between hardness and fracture resistance, reducing the frequency of insert changes and supporting smoother production flows. Precise geometry for repeatable surface quality and tool stability The triangle 60° geometry combined with a 0.4 mm corner radius and a 7° clearance angle provides a stable cutting edge with reduced radial run‑out and predictable engagement in the workpiece. The insert’s designation and form factor allow compact, secure clamping in standard toolholders, delivering consistent contact conditions and improved surface finishes. Tolerance class M and execution T underpin dimensional reliability for repeat setups, while the insert dimensions (size 11, thickness 02) suit a broad range of turning applications where both strength and accessibility are required. Fit for ISO P steels and engineered for everyday machining reliability Rated for ISO group P (steel), this insert suits unalloyed and alloyed steels and is meant for the heat and chip characteristics typical of steel machining. The coated carbide formulation from Walter Tools supports stable cutting across varying feed rates, helping to maintain component accuracy over longer tool life. The result is reproducible productivity and fewer tool stops for maintenance — a practical advantage in series production and jobbing alike. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger‑tec Gold inserts into current machining processes and for ordering assistance Technical data Article number / SKU: TCMT110204‑MP6‑WPP20G‑WALTER Product type: Turning indexable insert Designation: TCMT110204‑MP6 WPP20G Facts Plate size: 11 Thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Special features Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: MP6 Geometry: Triangle 60° Material designation: P (steel) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? This TCMT110204‑MP6 WPP20G insert is specified for ISO group P materials, meaning it is suitable for machining unalloyed and alloyed steel grades. How does the Tiger‑tec Gold coating help in practice? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and reduces flank wear, which in turn extends service intervals and supports more consistent component quality across production runs. What benefit does the MP6 chipbreaker provide? The MP6 chipbreaker produces controlled chip shapes and reduces the risk of stringing in steel turning operations, improving process reliability and reducing manual chip management. Is the 0.4 mm corner radius suitable for finishing operations? A 0.4 mm radius on this triangular insert offers a compromise between edge strength and surface finish; it performs well for general finishing and semi‑finishing where moderate robustness and a good surface quality are required. Can this insert be used in batch production with frequent tool changes? Yes. The combination of a wear‑resistant grade and stable geometry makes the insert appropriate for batch and series production, where repeatability and reduced changeover frequency are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Walter Tools and other mentioned brand names are used for clarification only; there is no affiliation implied. The offered article is an original, brand‑new product from the manufacturer.
TCMT110204-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, a precise RK4 chipbreaker, and the triangular 60° geometry for consistent productivity in Gusseisen machining; order directly through Metav Werkzeuge or consult the technical team for application matching. TCMT110204-RK4 WKK10S triangle indexable insert for cast iron — Walter Tools TCMT110204‑RK4 WKK10S offers a coated, carbide-based grade for productive cast iron turning and boring operations. Tiger·tec Silver coating technology Optimised for cast iron machining Triangular 60° shape for stable indexing 0.4 mm corner radius for robust edge Proven productivity and extended tool life with advanced grade The Tiger·tec Silver coating combined with the WKK10S grade is designed specifically to address the abrasive wear typical of cast iron machining. The result is a balance of wear resistance and toughness that sustains cutting performance over longer tool life cycles. That enhanced durability reduces downtime for insert changes and supports higher effective material removal rates, contributing directly to improved process economy and predictable production output. Geometry engineered for stability and repeatability The triangular 60° plate form delivers three usable cutting corners per insert and a secure clamping footprint, improving indexing stability during interrupted cuts often encountered in roughing. The 7° clearance angle reduces rubbing while maintaining a positive cutting action, and the 0.4 mm corner radius provides a robust edge for medium-to-heavy depth cuts. Together with the RK4 chipbreaker, the geometry ensures controlled chip formation and evacuation, which is essential for safe, reproducible machining cycles. Material compatibility and application focus This indexable insert is tailored to the machinability profile of cast iron (ISO group K). The substrate and coating technology compensate for the typically short, brittle chips and high abrasive loading of grey and nodular cast iron. The WKK10S classification denotes a coated carbide variety optimised for this material family, offering reliable performance where standard grades would suffer accelerated flank and crater wear. Integration into the machining process and handling The designation TCMT110204‑RK4 corresponds to a common insert format that suits a wide range of turning holders and boring adapters built for triangular inserts. The standardised form enables fast replacement and straightforward tool setup, supporting consistent cycle times and reduced changeover complexity. The insert’s tolerance class M contributes to predictable seating and alignment in modern toolholders, enhancing reproducibility across shifts and machines. Operational benefits and manufacturing outcomes Adopting this insert in cast iron turning tasks can improve part quality and surface finish while lowering the frequency of tool changes. The combination of Tiger·tec Silver coating and the RK4 chipbreaker helps prevent edge chipping and supports steady state cutting, which is beneficial for both small-batch and continuous production environments. Walter Tools’ grade selection underlines a focus on process security and repeatable results in industrial machining contexts. Contact Metav Werkzeuge for a tailored recommendation and technical matching for cast iron applications — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: TCMT110204-RK4-WKK10S-WALTER Designation: TCMT110204-RK4 WKK10S Brand: Walter Tools Series: Tiger-tec Silver Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate thickness: 02 Special features Grade: WKK10S Coating/technology: Tiger·tec Silver Shape: Triangle 60° Chipbreaker: RK4 Tolerance class: M Substrate: K (cast iron application) Execution: T FAQ Which materials is this insert suitable for? The TCMT110204‑RK4 WKK10S indexable insert is specified for cast iron (ISO group K), reflecting the WKK10S grade and Tiger·tec Silver coating optimised for abrasive, brittle chips. What advantages does the Tiger·tec Silver grade provide? Tiger·tec Silver on the WKK10S grade improves wear resistance and thermal stability during continuous or heavy cast iron machining, enabling longer tool life and steadier performance. How does the RK4 chipbreaker influence chip control? The RK4 chipbreaker promotes controlled chip segmentation and reliable evacuation when turning cast iron, reducing the risk of entanglement and supporting consistent surface quality. What is the significance of the triangular 60° form and 0.4 mm radius? The triangular 60° format supplies three cutting edges per insert and a stable clamping interface, while the 0.4 mm corner radius balances edge strength with acceptable surface finish for medium-depth cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
TCMT110204-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Silver coating and an RK4 chipbreaker for stable, productive machining of cast iron; the triangular 60° geometry with a 0.4 mm nose radius and 7° clearance ensures consistent surface quality and simple indexing. Order via Metav Werkzeuge or consult our team for application support. TCMT110204-RK4 WKK20S – Indexable insert for turning and boring, Tiger‑tec Silver, cast iron (Walter Tools) The TCMT110204-RK4 WKK20S is a triangular indexable insert engineered for reliable machining of cast iron, combining a coated carbide grade with a specialised RK4 chipbreaker for stable, short-chip formation in interrupted and continuous cuts Tiger‑tec Silver coating for long tool life Optimised RK4 chipbreaker for cast‑iron chips 7° clearance angle, 0.4 mm nose radius Durable coating and grade for extended tool life The insert uses the Tiger‑tec Silver coating together with the WKK20S carbide grade to deliver enhanced wear resistance when machining abrasive cast‑iron materials. This combination reduces flank wear and maintains cutting-edge integrity over longer cycles, translating into fewer indexings and lower tooling cost per part. For users seeking reproducible production runs, the coated grade offers a predictable service life and consistent performance under the typical thermal and mechanical loads encountered in cast‑iron turning. Stable chip control and secure cutting geometry Equipped with an RK4 chipbreaker and a triangular 60° form, the insert is optimised for producing short, controllable chips in grey and nodular cast irons. The 0.4 mm nose radius and 7° clearance angle contribute to a balanced mix of strength and edge definition, improving surface finish and dimensional stability. The result is reduced risk of built‑up edge, improved process security and a lower incidence of unexpected rework in series production. Efficient use and straightforward tool management The three‑sided triangular design provides multiple cutting edges per insert, simplifying inventory and reducing overall tooling expenditure. The insert’s designation aligns with standard toolholders and ISO classifications, enabling quick implementation into existing turning or boring setups. Backed by the Walter Tools engineering concept, the solution supports productive machining strategies with minimal setup time and clear upgrade paths for different cast‑iron applications. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools TCMT110204-RK4 WKK20S optimised for cast‑iron machining Technical Data Article number: TCMT110204-RK4-WKK20S-WALTER Description: TCMT110204-RK4 WKK20S indexable insert, Tiger‑tec Silver Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Triangular 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Special features Grade: WKK20S Series: Tiger‑tec Silver Chipbreaker: RK4 Application: cast iron Execution: T ISO designation: TCMT110204-RK4 FAQ What materials is this insert designed for? The TCMT110204-RK4 WKK20S insert is formulated for cast iron applications; the WKK20S grade and Tiger‑tec Silver coating focus on abrasive wear resistance and short‑chip behaviour in cast materials. How does the RK4 chipbreaker affect process stability? The RK4 chipbreaker produces short, controllable chips in cast‑iron turning, improving process security and reducing the likelihood of chip entanglement or built‑up edge when machining with the TCMT110204-RK4 WKK20S insert. Can the triangular insert be indexed to use multiple edges? Yes, the triangular 60° geometry provides three usable cutting edges per insert, enabling quick indexing and efficient use of the carbide cutting material for economical production. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
TCMT110204-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a reliable RM4 chipbreaker and a compact triangular geometry for consistent machining of stainless steel; the result is stable chip control and extended tool life. Order directly via Metav Werkzeuge or consult Metav’s technical advisors for application-specific recommendations. TCMT110204-RM4 WMP20G – Turning and boring indexable insert, Tiger·tec Gold, for stainless steel — Walter Tools TCMT110204-RM4 WMP20G is a coated carbide indexable insert designed for turning and boring operations in stainless steel, combining a 60° triangular form with a 0.4 mm corner radius for robust cutting performance Tiger·tec Gold coated carbide grade WMP20G Designed for stainless steel applications RM4 chipbreaker for controlled chips Triangular 60° insert with 0.4 mm radius High-performance cutting where reliability matters The Tiger·tec Gold grade WMP20G offers a balanced combination of wear resistance and toughness that supports secure chip formation when machining stainless steel. Coated carbide technology reduces flank wear and thermal sensitivity, which translates into fewer interruptions and more consistent component quality. The result is a measurable improvement in process stability for medium to robust cutting conditions, reducing the frequency of insert changes and improving overall shop-floor productivity. Geometry engineered for consistent edge life A triangular 60° insert with a 0.4 mm corner radius delivers a favourable trade-off between edge strength and cutting versatility. The 60° form provides three indexing positions for extended usable life, while the modest corner radius helps absorb cutting forces during interrupted cuts and heavy engagement. Together with the 7° clearance, the geometry minimises rubbing and supports a stable cutting edge, particularly when facing the challenges posed by tough-to-machine stainless steel. Chip control and surface quality through dedicated chipbreaker design The RM4 chipbreaker is configured to shape and evacuate chips reliably under varying feed rates, which reduces the risk of built-up edge on the insert and protects the workpiece surface. In practice, improved chip control helps maintain dimensional accuracy and repeatable surface finishes, decreasing secondary operations. For production environments where repeatability and process control matter, the combination of chip geometry and the coating system supports uninterrupted runs and consistent part quality. Practical advantages for workshop integration This indexable insert is supplied in a standard triangular form and is compatible with common turning tool holders that accept the TCMT geometry. The coated substrate and grade selection focus on predictable performance in stainless steel, which simplifies grade selection for operators and process engineers. By using a proven insert family, tool change intervals become easier to plan, tool inventories can be standardised, and machine uptime is increased — all contributing to lower overall machining costs. When to choose this insert for production Select this insert for turning and light boring operations where stainless steel is the predominant material and where a balance of edge robustness and wear resistance is required. The coated carbide and chipbreaker combination is particularly suitable for shops seeking improved process security and consistent surface results without frequent regrinding or complex tooling changes. For jobs requiring higher aggressiveness or different materials, consider matching the insert geometry and grade to the specific application parameters. For application-specific advice on integrating the Walter Tools TCMT110204-RM4 WMP20G insert into production processes, contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and availability. Technical data SKU: TCMT110204-RM4-WMP20G-WALTER Article designation: TCMT110204-RM4 WMP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WMP20G Core specifications Clearance angle: 7° Corner radius: 0.4 Insert shape: Triangular 60° Size: 11 Thickness: 02 Additional features Coated carbide (Tiger·tec Gold) Suitable for stainless steel Chipbreaker: RM4 Execution: T FAQ Which materials is this insert optimised for? The TCMT110204-RM4 WMP20G insert is optimised for stainless steel; the WMP20G grade and Tiger·tec Gold coating support secure chip formation and thermal stability when machining stainless materials. How does the RM4 chipbreaker affect machining performance? The RM4 chipbreaker promotes stable chip formation and evacuation, reducing built-up edge and improving surface finish during turning operations with the TCMT110204-RM4 WMP20G insert. What are the benefits of the triangular 60° shape? A triangular 60° form provides three usable cutting edges per insert, increasing indexable life and offering robust edge strength suitable for medium to robust cutting tasks. Is the insert suitable for interrupted cuts and heavy engagement? Yes; the combination of a 0.4 mm corner radius, 7° clearance and the Tiger·tec Gold coating offers enhanced edge strength and wear resistance, making the insert resilient under interrupted and heavier engagement conditions. Can this insert be used in standard TCMT tool holders? The TCMT110204-RM4 WMP20G is designed to fit standard tool holders that accept TCMT geometry, enabling straightforward integration into existing turning setups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned only for explanation. There is no connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer Walter Tools.
TCMT110204-RM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and durable wear resistance for consistent results when machining rostfreier Stahl; the optimised chip control provided by the RM4 breaker reduces interruptions and improves productivity. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TCMT110204-RM4 WMP20S turning/boring indexable insert, Tiger·tec Silver — Walter Tools The TCMT110204-RM4 WMP20S is a triangular, coated carbide indexable insert designed for robust turning and boring of rostfreier Stahl under medium to heavy-duty conditions, delivering stable cutting and reliable edge life. Tiger·tec Silver coated carbide grade WMP20S Optimised RM4 chipbreaker for secure chip control Triangular 60° shape, 0.4 mm corner radius 7° clearance angle for reliable rostfreier Stahl cutting Increased process stability for stainless applications The insert uses the Tiger·tec Silver coating combined with the WMP20S grade to provide enhanced wear resistance and temperature tolerance when machining rostfreier Stahl. This combination supports consistent cutting-edge performance and reduces the frequency of insert changes, which translates directly into less unplanned machine downtime and improved throughput. The result is a measurable uplift in machining uptime and repeatable surface quality without compromise on tool life. Reliable chip formation and fewer interruptions An RM4 chipbreaker is integrated to manage chips effectively during tougher stainless operations, promoting controlled chip flow and minimising entanglement. The triangular 60° geometry increases the number of usable cutting edges per insert, while the 0.4 mm corner radius balances edge strength with dimensional accuracy. This design leads to fewer stoppages for chip issues and steadier cycle times, which benefits batch production and mixed-series work alike. Optimised geometry for practical productivity gains A 7° clearance angle reduces rubbing at the flank and supports stable cutting conditions, particularly under the higher cutting temperatures typical of rostfreier Stahl. The coated, coated carbide construction of the insert helps maintain a sharp, durable cutting line, improving surface finishes and extending the service interval. For engineering teams seeking reproducible results across varying stainless grades, this insert delivers an efficient mix of robustness and predictability. For machining rostfreier Stahl with proven process reliability, contact Metav Werkzeuge for tailored advice on the Walter Tools TCMT110204‑RM4 WMP20S insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data SKU: TCMT110204-RM4-WMP20S-WALTER Article: TCMT110204-RM4 WMP20S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate form: Triangle 60° Plate thickness code: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: RM4 Execution: T Designation: TCMT110204-RM4 ISO designation: TCMT110204-RM4 WMP20S Suitable for rostfreier Stahl machining FAQ What materials is this insert optimised for? The TCMT110204‑RM4 WMP20S insert is optimised for machining rostfreier Stahl, with the Tiger·tec Silver grade supporting secure chip formation and edge stability. How does the RM4 chipbreaker benefit production? The RM4 chipbreaker on the TCMT110204‑RM4 WMP20S promotes controlled chips and fewer interruptions, improving cycle time consistency in stainless machining. How many cutting edges are available per insert? The triangular 60° geometry provides multiple usable cutting edges on the TCMT110204‑RM4 WMP20S, increasing tool economy in serial operations. Is the insert suitable for heavy interrupted cuts? The combination of a 0.4 mm corner radius and the Tiger·tec Silver coating makes the TCMT110204‑RM4 WMP20S resilient under moderate to robust cutting conditions on rostfreier Stahl. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM10S grade and a 0.4 mm nose radius for consistent performance in challenging materials; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TCMT110204-RM4 WSM10S turning insert — Triangle 60°, 7° free angle (Walter Tools) TCMT110204-RM4 WSM10S is a coated turning insert designed for demanding machining of rostfreier Stahl and heat-resistant alloys, offering robust edge stability and predictable chip formation. Tiger·tec Silver coating for heat resistance Designed for rostfreier Stahl and superalloys Triangle 60° form for stable cutting 0.4 mm nose radius for precise profiles Reliable high-temperature performance for difficult alloys The WSM10S grade, produced with Tiger·tec Silver coating, is engineered to resist thermal and mechanical stresses during extended turning operations. Coated carbide substrates retain edge stability where heat builds up, enabling a controlled cut in materials that tend to work-harden or stick to the tool. This results in fewer unexpected interruptions and more predictable component quality when machining rostfreier Stahl and superalloys, so cycle times remain stable and tool changes are reduced. Geometry and chip control that support consistent surfaces The triangular 60° insert geometry combined with the RM4 chipbreaker ensures reliable chip formation and evacuation on shoulder and profile cuts. The modest 7° free angle reduces rubbing while maintaining a strong cutting edge, and the 0.4 mm nose radius delivers fine profile definition without sacrificing edge life. Together these design elements improve surface finish and dimensional repeatability, translating technical advantages into measurable productivity gains on serial turning tasks. Process security and economical tool use in production Select operations benefit from the predictable wear behaviour of a coated grade like WSM10S: fewer unexpected edge failures and consistent part output contribute to a lower cost per component over time. The insert’s specification supports machining strategies for tough-to-cut materials, offering a balance of cutting-edge robustness and workable edge geometry. For workshops seeking reliable throughput, this insert contributes to a smoother production flow and simplified tool assortment management. Contact Metav Werkzeuge today for application-specific recommendations and to ensure the TCMT110204-RM4 WSM10S insert meets the process requirements for your rostfreier Stahl or superalloy parts — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: TCMT110204-RM4-WSM10S-WALTER Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM10S Facts Shape: Triangle 60° Free angle: 7° Corner radius: 0.4 mm Plate size: 11 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: RM4 Suitable for: rostfreier Stahl (ISO group M) and superalloys/titanium (ISO group S) Designation: TCMT110204-RM4 WSM10S FAQ What materials is this insert best suited for? The TCMT110204-RM4 WSM10S insert is intended for machining rostfreier Stahl (ISO group M) and heat-resistant superalloys/titanium (ISO group S), where thermal resistance and edge stability are required. How does the RM4 chipbreaker influence performance? The RM4 chipbreaker on this insert promotes controlled chip formation and evacuation during turning, supporting consistent surface finish and reducing the risk of chip-related interruptions on profile and shoulder cuts. Can the insert geometry improve surface finish on tight profiles? Yes. The triangle 60° geometry with a 0.4 mm nose radius provides accurate profile definition while maintaining adequate edge strength for repeatable finishes. Is the coating suitable for long cycle times and elevated cutting temperatures? The Tiger·tec Silver coating is designed for elevated temperatures and abrasive conditions, providing enhanced wear resistance and maintaining edge integrity over prolonged cycles. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110204-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, a precise 0.4 mm corner radius and stable chip control with the RM4 breaker to maintain consistent throughput on stainless steel and superalloys; order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. TCMT110204-RM4 WSM20S indexable turning insert — Triangle 60°, Tiger‑tec Silver coating — Walter Tools The TCMT110204-RM4 WSM20S is a triangular indexable insert designed for reliable turning of stainless steel and heat-resistant superalloys, offering stability and repeatable performance in demanding production environments. Tiger‑tec Silver coated carbide grade WSM20S Designed for stainless steel and superalloys Triangle 60° form with 7° relief RM4 chipbreaker for stable chip control 0.4 mm corner radius for accurate finishes Greater tool life through thermal and wear resistance The Tiger‑tec Silver coating and the WSM20S grade combine to provide enhanced wear resistance and thermal stability when machining tough materials. Coated carbide reduces abrasive wear and protects the cutting edge against heat-induced degradation, which directly extends tool life and reduces tool-change frequency. This leads to fewer interruptions on the shop floor and a more predictable production output when working with stainless steel or similarly challenging alloys. Stable chip formation for consistent surface quality The dedicated RM4 chipbreaker is engineered to control chip geometry under the high cutting stresses typical of superalloys and titanium-containing materials. Controlled chips reduce the risk of surface damage and improve handling, while the 0.4 mm corner radius supports a robust cutting edge that helps maintain dimensional accuracy and surface finish. Clear chip control also simplifies coolant management and disposal, improving process reliability. Practical geometry and repeatable machining results The triangular 60° insert form and 7° relief angle enable stable seating in standard TCMT-compatible toolholders and offer multiple indexable edges for economical use. With tolerance class M, the insert meets workshop demands for repeatability, so component tolerances remain consistent across batches. The compact geometry suits versatile turning applications, offering a balance of strength and accessibility in confined tool pockets. For specific workpiece materials or process tuning, Metav Werkzeuge can advise on optimum speeds and feeds. For tailored advice on integrating Walter Tools Tiger‑tec Silver inserts into a production process, contact Metav Werkzeuge for application support and ordering — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: TCMT110204-RM4-WSM20S-WALTER Product: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Grade: WSM20S (Tiger‑tec Silver) Series: Tiger‑tec Silver Tolerance class: M Relief angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 11 Chipbreaker: RM4 Thickness designation: 02 Designation without grade: TCMT110204-RM4 Full designation: TCMT110204-RM4 WSM20S Applicable materials: S / M (ISO groups) Execution: T Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness designation: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Carbide grade: WSM20S (coated carbide) Chip control: RM4 chipbreaker Geometry: Triangle 60° indexable insert Material suitability: stainless steel and heat‑resistant superalloys FAQ Which materials are best suited for this insert? The TCMT110204-RM4 WSM20S insert is optimised for stainless steel and heat‑resistant superalloys (ISO groups M and S), where the Tiger‑tec Silver coating supports safe chip formation and edge stability. What advantage does the RM4 chipbreaker provide? The RM4 chipbreaker on this Walter Tools insert helps form short, controllable chips under heavy cutting loads, improving surface finish and reducing the likelihood of chip entanglement. Is the insert compatible with standard TCMT toolholders? Yes, the triangular geometry corresponds to TCMT-style pockets; the insert’s form and 7° relief are intended for standard indexable turning toolholders that accept this designation. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius balances edge strength and finish quality: it supports robust cutting on tough materials while producing a fine surface when combined with correct cutting parameters. What does tolerance class M mean for production? Tolerance class M indicates consistent manufacturing tolerances for the insert, which contributes to repeatable tool positioning and predictable part accuracy across production runs. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. The brand Walter Tools is named where appropriate. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
TCMT110204-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM30S grade for reliable machining of stainless steel and heat‑resistant alloys; the insert’s RM4 chipbreaker and 0.4 mm corner radius support stable chip formation and consistent surface quality. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. TCMT110204-RM4 WSM30S turning and drill indexable insert — Tiger·tec Silver, RM4 chipbreaker (Walter Tools) A TCMT110204-RM4 WSM30S indexable insert designed for drilling, bore enlargement and light turning in stainless steel and heat‑resistant superalloys, optimised for stable cutting and controlled chip formation Tiger·tec Silver coating for enhanced heat resistance Optimised RM4 chipbreaker for consistent chips Triangle 60° geometry for versatile turning operations 0.4 mm corner radius for improved edge strength High performance on stainless steel and superalloys The combination of the WSM30S grade and Tiger·tec Silver coating provides a balance of wear resistance and thermal stability that benefits machining of stainless steel and demanding high‑temperature alloys. Coated carbide inserts reduce thermal load on the cutting edge and support secure chip formation, which lowers the risk of built‑up edge and improves repeatability. This results in fewer interruptions and a more predictable tool life in production environments where material properties challenge conventional grades. Geometry and chip control for consistent surface finish With a triangle 60° plate shape and a corner radius of 0.4 mm, the insert delivers a stable cutting edge suitable for finishing passes and gentle roughing. The RM4 chipbreaker is engineered to break and evacuate chips reliably at typical feed rates, reducing the chance of entanglement in bore operations and improving surface integrity. The 7° free angle supports positive cutting geometry that promotes lower cutting forces, which is advantageous when working with ductile or work‑hardening materials. Process reliability and productivity gains Tolerance class M and the insert’s sturdy design support consistent seat fit and repeatable results in automated tool magazines and turret systems. The coated grade and geometry reduce downtime through longer intervals between indexings, which contributes to higher productivity and lower unit costs. Walter Tools’ production standards and the Tiger·tec Silver series aim to provide a dependable solution for shops seeking both performance and process security under continuous operation. Practical application and tool selection guidance This indexable insert suits operations that combine drilling or bore enlargement with peripheral or light face turning, where control over chip form and edge stability is essential. When integrating the insert into an existing toolholder, ensure correct seating and secure clamping to exploit the designed tolerance class. For applications in complex stainless environments or mixed‑material production, consider matching the insert with appropriate feeds and cutting speeds tailored to the coated carbide grade to extend tool life and maintain surface quality. For application-specific recommendations or rapid supply of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for personalised advice and fast procurement — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT110204-RM4-WSM30S-WALTER Manufacturer: Walter Tools Designation: TCMT110204-RM4 WSM30S Series: Tiger·tec Silver Grade: WSM30S Core dimensions & measurements Plate form: Triangle 60° Plate size: 11 Corner radius: 0.4 mm Free angle: 7° Thickness code: 02 Tolerance class: M Design & features Chipbreaker: RM4 Coating: Tiger·tec Silver (coated carbide) Material suitability: S / M Application: drilling / bore enlargement and turning Suitable for stainless steel and heat‑resistant alloys FAQ What materials is this insert best suited for? The TCMT110204-RM4 WSM30S insert from Walter Tools is optimised for stainless steel and heat‑resistant superalloys (material groups M and S), offering thermal stability and controlled chip formation for these challenging materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this Walter Tools insert promotes consistent chip fragmentation and evacuation, which improves surface finish and reduces the likelihood of chip reÂntrapping in bore and turning operations. Can the insert be used for both drilling and turning operations? Yes, the design of the TCMT110204-RM4 WSM30S indexable insert allows use in drilling/bore enlargement holders as well as in light turning applications, providing flexibility in mixed‑operation setups. What does the 0.4 mm corner radius mean for edge strength? A 0.4 mm corner radius increases edge stability compared with a smaller radius, helping to resist deformation and prolong edge life during finishing passes in stainless steel. Is the insert suitable for automated turret systems? With tolerance class M and standard seat geometry, the insert provides repeatable seating suitable for automatic tool changers and turret systems, supporting process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. No affiliation between Metav Werkzeuge and the trademark owners is implied. The offered item is an original, brand‑new product from the manufacturer.
TCMT110204-RP4 WPP10G T Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life, reliable chip control and compact geometry for consistent turning and boring of Stahl components; order directly via Metav Werkzeuge or ask our consultants for application advice. TCMT110204-RP4 WPP10G — Triangle 60° indexable insert for Stahl, 7° clearance, Walter Tools The TCMT110204-RP4 WPP10G is a triangular 60° indexable insert from Walter Tools designed for productive turning and boring operations in Stahl applications. Tiger·tec Gold coating for extended tool life WPP10G grade optimised for Stahl machining Triangle 60° shape with 0.4 mm corner radius 7° clearance angle with RP4 chipbreaker Reliable wear resistance through Tiger·tec Gold technology The combination of the WPP10G grade and Tiger·tec Gold coating delivers a balance of wear resistance and toughness tailored for Stahl. The coated carbide substrate provides a stable cutting edge that tolerates the typical heat and chip formation of Stahl machining, so tool life is extended and tool changes are less frequent. For production environments this means more predictable uptime and fewer interruptions to the machining schedule. Geometry engineered for consistent surface finish and edge strength The triangle 60° form and 0.4 mm corner radius provide a robust cutting edge that withstands moderate interrupted cuts while still enabling a good surface finish. The 7° clearance angle reduces rubbing on the flank face, lowering cutting temperatures and improving component accuracy. The RP4 chipbreaker is configured to control chips effectively during turning and boring, reducing the risk of chip entanglement and facilitating stable cutting conditions for repeatable results. Clear specification for application in the ISO P group This insert is configured for the ISO P material group — Stahl — and is therefore suited to unalloyed and alloyed steels encountered in general engineering and production. The TCMT110204-RP4 WPP10G supports machining strategies that value consistent material removal rates and process security. The tolerance class M ensures dimensional conformity for fixture and pocketing, simplifying tool programme setup and reducing secondary operations. Practical handling and economical operation The compact insert format and the standardised designation help to streamline tool inventory and minimise setup complexity. The indexable design reduces the cost per cutting edge compared with solid tools, while the robust grade and coating minimise unexpected wear. For workshops seeking a dependable insert for turning and light boring tasks in Stahl, this solution provides an effective compromise between performance and economy. Contact Metav Werkzeuge today to discuss the TCMT110204-RP4 WPP10G for specific applications in Stahl or to request tailored cutting data and batch availability Technical data Article number: TCMT110204-RP4-WPP10G-WALTER Designation: TCMT110204-RP4 ISO designation: TCMT110204-RP4 WPP10G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Size: 11 Thickness code: 02 Chipbreaker: RP4 Tolerance class: M Features Grade: WPP10G (Tiger·tec Gold) Coating/material: Coated carbide Series: Tiger·tec Gold Material application: P (Stahl) Execution: T FAQ What materials is this insert suitable for? The insert is specified for the ISO P group; the TCMT110204-RP4 WPP10G is therefore suitable for machining Stahl such as unalloyed and alloyed steels. How does the RP4 chipbreaker help in production? The RP4 chipbreaker on this Walter Tools insert shapes chips for safe evacuation during turning and boring, supporting consistent cutting conditions and reducing rework from chip damage. What does the WPP10G grade mean for tool life? WPP10G, part of the Tiger·tec Gold family, is a coated carbide grade designed to balance wear resistance and toughness, improving tool life in typical Stahl applications. Is this insert tolerant of interrupted cuts? The triangle 60° geometry combined with a 0.4 mm corner radius provides a robust edge capable of handling moderate interruptions while maintaining surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com