TCMT110204-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, an RP4 chipbreaker optimised for steel and a compact triangle geometry for reliable, repeatable turning performance; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. TCMT110204‑RP4 WPP20G – Indexable insert for steel turning, triangle 60°, Walter Tools TCMT110204‑RP4 WPP20G is an indexable turning and boring insert designed for efficient machining of steel (ISO group P) in general turning operations Tiger·tec Gold coated grade WPP20G Optimised RP4 chipbreaker for steel Triangle 60° insert, 0.4 mm corner radius 7° clearance angle for stable cutting High productivity for steel machining with coated carbide This insert combines a Tiger·tec Gold coated cemented carbide substrate with the WPP20G grade to deliver high process security when machining steel. The coated structure is designed to resist abrasive wear while maintaining edge stability, which translates into longer tool life and fewer interruptions in production. The RP4 chipbreaker specifically improves chip control in typical steel turning, reducing the need for complex chip evacuation measures. The measurable benefits are lower tooling costs per part and more consistent cycle times, making the insert suitable for demanding batch production and continuous operation environments. Predictable cutting behaviour and surface quality The triangular 60° geometry with a 0.4 mm corner radius and a 7° clearance angle delivers stable cutting forces and predictable deflection behaviour. These geometric parameters are chosen to balance strength and versatility: the small corner radius supports fine finishing without sacrificing edge robustness, while the clearance geometry reduces rubbing at the flank face. As a result, surface finish becomes more consistent and rework is reduced. For machinists seeking repeatable results on unalloyed and alloyed steels, the insert’s specification minimises variability between batches and supports tight process control. Practical selection and application guidance for workshop use The insert is coded as TCMT110204‑RP4 WPP20G, an industry-standard designation that facilitates toolholder matching and inventory management. The grade WPP20G is tuned for the heat and chip formation typical of steel machining and offers a compromise between wear resistance and toughness—suitable for general-purpose turning across a broad range of steel components. For best results, combine the insert with toolholders rated for triangle inserts and apply cutting data consistent with coated carbide recommendations for steel. Where unfamiliar alloys or special conditions exist, application testing and incremental feed optimisation are advisable to define the optimal parameters. Discuss Walter Tools Tiger·tec Gold applications with Metav Werkzeuge to optimise steel turning using the TCMT110204‑RP4 WPP20G insert — contact Metav Werkzeuge for tailored machining advice Technical Data SKU: TCMT110204‑RP4‑WPP20G‑WALTER Designation: TCMT110204‑RP4 WPP20G Product type: Drill/boring indexable insert / turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 11 Thickness code: 02 Tolerance class: M Materials & special features Coating / grade: WPP20G (Tiger·tec Gold) Carbide: coated cemented carbide Chipbreaker: RP4 Suitable for: Steel (P) according to ISO 513 Execution: T FAQ Is this insert suitable for stainless steel? The TCMT110204‑RP4 WPP20G is specified for steel (ISO group P); applicability to rostfreier Stahl (stainless steel) is not declared for this grade and should be verified with application trials or alternative grades. What is the chip control capability of the RP4 breaker? The RP4 chipbreaker on the TCMT110204‑RP4 WPP20G is optimised for the chip formation characteristics of steel, offering improved chip segmentation and evacuation under typical turning feeds and depths. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating applied to the WPP20G grade enhances wear resistance and edge stability during steel machining, resulting in extended tool life compared with uncoated carbide in comparable conditions. Which toolholders are compatible with the TCMT110204‑RP4 insert? Standard triangular indexable toolholders designed for TCMT‑type inserts are compatible; ensure correct clamping and seat geometry for secure mounting and repeatable indexation. What performance can be expected in finishing operations? With a 0.4 mm corner radius and the coated grade, the TCMT110204‑RP4 WPP20G can achieve consistent surface quality in finishing passes when combined with appropriate feed rates and cutting speeds for steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
TCMT110204-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a robust RP4 chipbreaker for consistent performance and extended tool life; order directly via Metav Werkzeuge or consult the team for tailored application advice. TCMT110204‑RP4 WPP30G – Turning insert (triangle 60°) by Walter Tools, Tiger‑tec Gold for steel The TCMT110204‑RP4 WPP30G is a triangle 60° indexable turning insert with Tiger‑tec Gold coating, engineered for reliable steel machining in general turning and bore‑turning applications. Triangle 60° insert geometry Tiger‑tec Gold coated carbide grade WPP30G RP4 chipbreaker for reliable chip control 0.4 mm corner radius and 7° clearance Increased process reliability and longer tool life due to advanced coating The combination of the Tiger‑tec Gold coating and the WPP30G carbide grade delivers a balance of wear resistance and toughness that is designed specifically for steel machining. The coating reduces abrasive wear and thermal softening, which translates into longer tool life and fewer indexings. As a result, cycle times remain stable over longer production runs and machining processes become more predictable. For operations where consistent surface quality and reduced downtime matter, the coated substrate ensures economical productivity and dependable repeatability. Consistent chip control and superior surface finish from geometry and chipbreaker The RP4 chipbreaker is optimised for controlled chip formation in turning and boring operations, helping to avoid entangling or jamming in medium to heavy cuts. Combined with the triangle 60° geometry and the 0.4 mm corner radius, the insert maintains cutting edge strength while enabling good surface finish in finishing passes. The 7° clearance reduces rubbing and heat build‑up, improving dimensional accuracy on the workpiece. These design elements make the insert particularly suitable for stable, repeatable finishes where chip evacuation and workpiece integrity are critical. Practical compatibility and economical machining for production environments With a universal focus on steel applications and a tolerance class of M, the insert fits common turning toolholders and mounting systems used in modern workshops. The design supports a range of cutting conditions thanks to the WPP30G grade characteristics, which favour versatility across typical steel types encountered in production. The combination of a proven chipbreaker, a coated carbide grade and compact geometry contributes to lower tool consumption and predictable tool change intervals, offering a clear cost‑efficiency advantage over less optimised alternatives. Choose Walter Tools' Tiger‑tec Gold inserts for stable, economical machining — contact Metav Werkzeuge for application guidance or to request a tailored quotation: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: TCMT110204-RP4-WPP30G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT110204-RP4 WPP30G Walter Tools Manufacturer: Walter Tools Core data Inscribed circle / size: 11 Thickness: 02 Corner radius: 0,4 Relief angle: 7° Tolerance class: M Special features Grade / sort: WPP30G Coating / series: Tiger‑tec Gold Chipbreaker: RP4 Geometry: Dreieck 60° Substrate designation: coated carbide Application group: P (steel) FAQ What materials is this insert designed for? The TCMT110204‑RP4 WPP30G from Walter Tools is designed for steel machining; the WPP30G grade and Tiger‑tec Gold coating are optimised for the heat and chip characteristics typical of steel. What are the main geometric specifications of the insert? The insert features a triangle 60° shape, an inscribed circle size of 11, a thickness of 02, a 0.4 mm corner radius and a 7° clearance, matching common turning toolholder systems. How does the RP4 chipbreaker influence machining performance? The RP4 chipbreaker on this Walter Tools insert promotes controlled chip formation and reliable evacuation, reducing the risk of chip jamming and supporting consistent surface quality under typical turning conditions. Is the TCMT110204‑RP4‑WPP30G suitable for finishing or roughing operations? The WPP30G grade provides a balanced performance that is suited to a range of cutting conditions; paired with the RP4 chipbreaker and modest corner radius, it is effective in finishing and medium‑depth cuts where a combination of wear resistance and toughness is required. What tolerance and precision class does the insert meet? This insert is supplied in tolerance class M, which aligns with industry standards for dimensional consistency and interchangeability in turning applications. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners; brand names are used solely for explanation. There is no affiliation between our company and the mentioned manufacturers. The offered article is an original, factory‑new product of the manufacturer.
TCMT110208-FK6 WKK10S WKK10S Wendeplatten - Walter Tools
Efficient, abrasion-resistant machining of cast-iron components is achieved by combining the Tiger·tec Silver coating with the wear-resistant WKK10S grade and a 0.8 mm corner radius for consistent edge life; order the TCMT110208-FK6 WKK10S directly via Metav Werkzeuge or consult our technical advisers for cutting data and application support. TCMT110208-FK6 WKK10S — Turning and Boring Indexable Insert, Tiger·tec Silver (Walter Tools) The TCMT110208-FK6 WKK10S is a triangular 60° indexable insert designed for productive turning and boring of cast iron components, delivering stable chip formation and long tool life. Tiger·tec Silver coating for abrasive wear resistance WKK10S grade optimised for cast iron machining Triangle 60° insert with 0.8 mm corner radius 7° clearance angle for reliable chip control Consistent accuracy for cast-iron production The combination of a coated, hard-metal grade and a triangular geometry ensures reliable edge life when machining abrasive cast-iron grades. The WKK10S grade, developed within the Tiger·tec Silver family, is tuned to resist the common abrasive wear seen with grey and nodular cast irons, which reduces frequency of index changes and stabilises process capability. For production workshops, this translates into fewer interruptions and more predictable component tolerances, supporting higher throughput without sacrificing surface quality. Faster machining with wear-resistant coating A modern, multilayer coating applied in the Tiger·tec Silver process improves resistance to abrasive wear and thermal loading. The Tiger·tec Silver finish enhances flank and crater wear behaviour, enabling more aggressive cutting data on cast-iron workpieces while maintaining dimensional control. This allows a clear cost-efficiency argument: longer insert life and lower tool consumption per component. Where cycle-time improvements are required, selecting a coated insert grade like this provides measurable gains in productivity. Controlled chips and secure cutting edges The integrated FK6 chipformer and the insert geometry with a 0.8 mm corner radius support the formation of short, breakable chips typical for cast-iron machining. A defined 7° clearance angle reduces rubbing and heat build-up at the cutting edge, preserving the insert’s geometry and improving surface finish. For operators with limited experience of indexable tooling, these built-in chip control features simplify setup and reduce the need for frequent adjustments during uninterrupted production runs. Designed for smooth integration in tool systems The triangular 60° format and standard ISO-style designation make the insert compatible with a wide range of toolholders and turning systems. Its profile supports both general turning and light finishing passes, allowing workshop planners to consolidate tool inventories. Technical personnel will appreciate the clear assignment to the cast-iron material group (K), which simplifies tooling lists and ensures consistent selection across multiple machines and shifts. For reliable cast-iron performance select Walter Tools’ Tiger·tec Silver inserts — contact Metav Werkzeuge for tailored cutting parameters and availability at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing production lines Technical data Article number: TCMT110208-FK6-WKK10S-WALTER Designation: TCMT110208-FK6 WKK10S Series: Tiger·tec Silver Manufacturer: Walter Tools Core data Plate size: 11 Plate thickness: 02 Corner radius: 0.8 mm Clearance angle: 7° Plate form: Triangle 60° Tolerance class: M Special features Grade: WKK10S (coated hard metal) Chipformer: FK6 Application: Cast iron (material group K) Execution: T FAQ What materials is this insert intended for? The TCMT110208-FK6 WKK10S is intended primarily for machining cast iron; the WKK10S grade and Tiger·tec Silver coating are optimised for abrasive, short-chip cast-iron conditions. Can this insert be used for finishing passes? Yes, the triangle 60° geometry with a 0.8 mm corner radius suits light finishing and semi-finishing tasks while maintaining a good surface quality on cast-iron components. Which chipformer does the insert use and why is it important? The insert features the FK6 chipformer, engineered to produce short, controllable chips in cast-iron turning, improving process reliability and reducing the risk of chip entanglement. How does the coating affect cutting performance? The Tiger·tec Silver coating increases resistance to abrasive wear and thermal stresses, allowing higher cutting speeds and longer tool life compared with uncoated grades in cast-iron applications. Is the insert compatible with standard holders? The ISO-style designation and triangular 60° form make the insert compatible with common indexable insert holders designed for TCMT-type geometries. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for descriptive purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product from the manufacturer.
TCMT110208-FK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and a specialised grade for cast iron to improve throughput and tool life. Secure the TCMT110208-FK6 WKK20S from Metav Werkzeuge for reliable machining of abrasive cast-iron materials or consult Metav Werkzeuge for application advice. TCMT110208-FK6 WKK20S turning/drilling indexable insert — Walter Tools, Tiger·tec Silver, for cast iron TCMT110208-FK6 WKK20S is a triangle 60° indexable insert designed for turning and bore-enlargement operations in cast iron, combining a wear-resistant grade with a dedicated chipbreaker. Tiger·tec Silver coated grade WKK20S Optimised for cast iron (ISO group K) Triangle 60° insert form for versatile clamping 7° clearance angle, 0.8 mm corner radius Consistent machining when abrasive wear is a concern The Tiger·tec Silver grade WKK20S is a coated carbide formulation that resists the high abrasive wear typical of cast-iron machining. This characteristic reduces flank wear and extends effective cutting life, which in turn lowers tool-change frequency and supports more stable production cycles. Combined with the FK6 chipbreaker, the insert promotes predictable, short breaking chips that ease evacuation in interrupted cuts and reduce the risk of workpiece surface damage. Geometry tailored for versatility and edge stability The triangle 60° geometry and the 0.8 mm corner radius deliver a robust cutting edge for medium to heavy cuts, while the 7° clearance angle helps maintain low cutting forces and consistent surface finish. The compact 11 mm insert size offers good accessibility in tight toolholders and suited tool setups. These geometric choices focus on providing a balance between durability and the possibility to use multiple cutting edges per indexable insert, supporting cost-effective machining. Process benefits: productivity, chip control and repeatability Equipped with the FK6 chipbreaker, this insert is optimised for the short, brittle chips produced by cast iron, improving swarf handling and reducing secondary operations for chip cleaning. The grade’s toughness supports reliable edge retention across varying batch sizes, which improves reproducibility and lowers scrap rates. For operations prioritising throughput and minimal downtime, the combination of Tiger·tec Silver coating and the FK6 geometry provides measurable productivity advantages. Practical selection and integration guidance for workshop use The article designation TCMT110208-FK6 WKK20S fits standard ISO-indexable systems that accept triangle 60° inserts; it is intended primarily for cast iron applications (ISO group K). When integrating into an existing tool system, pair the insert with a rigid toolholder suited to triangle inserts and verify clamping torque to ensure secure seating. For complex mixes of materials or specialised cycle requirements, technical consultation from Metav Werkzeuge is recommended to match cutting data and coolant strategy to the tool’s strengths. For tailored advice on deploying the TCMT110208-FK6 WKK20S in production, or to order directly, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists are available to support grade and geometry selection Technical Data Article number: TCMT110208-FK6-WKK20S-WALTER Product designation: TCMT110208-FK6 WKK20S Series: Tiger·tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 11 mm Insert thickness: 02 Insert form: Triangle 60° Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: FK6 Grade type: coated carbide Material group: K (cast iron) Intended application: turning and bore-enlargement in cast iron FAQ Is this insert suitable for cast-iron turning? The TCMT110208-FK6 WKK20S is specifically formulated for cast iron (ISO group K) and performs best on abrasive, brittle cast-iron materials thanks to the Tiger·tec Silver grade and FK6 chipbreaker. What are the main advantages of the Tiger·tec Silver grade? Tiger·tec Silver provides improved wear resistance and temperature stability, which for the WKK20S grade translates into longer tool life and more consistent edge behaviour when machining cast iron. Can the insert be used for boring as well as turning? Yes, the insert’s designation indicates suitability for turning and bore-enlargement operations; it fits toolholders that accept triangle 60° indexable inserts for both processes. Which chip behaviour can be expected with the FK6 chipbreaker? The FK6 chipbreaker promotes short, controlled chips typical for cast-iron machining, improving evacuation and reducing entanglement risks at the tool nose. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and explanation. There is no affiliation between our company and the mentioned brands. The described article is an original, brand-new product from the manufacturer.
TCMT110208-FM4 WSM10S T Wendeplatten - Walter Tools
Optimise turning operations with a wear-resistant, Tiger·tec Silver-coated indexable insert that provides stable chip control and consistent edge life when machining stainless steels and heat-resistant superalloys. Order the TCMT110208-FM4 WSM10S directly via Metav Werkzeuge or consult our application specialists for process recommendations. TCMT110208-FM4 WSM10S – Triangle 60° Turning Insert, Tiger·tec Silver (Walter Tools) The TCMT110208-FM4 WSM10S is a triangle 60° indexable insert engineered for reliable chip control and extended tool life in the machining of stainless steels and heat-resistant superalloys. Tiger·tec Silver coated carbide grade WSM10S FM4 chipbreaker for secure chip control Triangle 60° form with 0.8 mm corner radius 7° clearance angle for stable cutting Longer tool life through coating and grade advantages The combination of the Tiger·tec Silver coating and the WSM10S grade creates a balance between thermal resistance and toughness that is particularly valuable when machining stainless steels and nickel-based alloys. The multi-layer coating reduces friction and improves heat dissipation at the cutting edge, which leads to reduced flank wear and a longer service life. For production environments, this translates into fewer tool changes and more predictable tool-life cycles, supporting consistent part quality and lower unit costs. Improved chip control and surface results with FM4 geometry The FM4 chipbreaker geometry is designed to break and evacuate chips reliably under the cutting conditions typical for high-toughness materials. By promoting controlled chip formation, the insert reduces the risk of built-up edge and irregular chip flow that can damage workpiece surfaces. The result is improved surface finish and more stable cutting forces, enabling higher feed rates in many applications and thus enhanced process efficiency. Secure edge stability and application flexibility The triangular 60° form and 0.8 mm corner radius provide a robust cutting edge that tolerates interrupted cuts and slight dimension variations, while the 7° clearance angle helps maintain a stable cutting action. The insert size and tolerance class support consistent indexing and repeatability in common tool holders. Compatibility with both stainless steels (M) and heat-resistant alloys/titanium (S) makes this insert a versatile choice where varied batch work or mixed-material production is required. For tailored recommendations or to order the TCMT110208-FM4 WSM10S from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast availability Technical Data Article number: TCMT110208-FM4-WSM10S-WALTER Designation: TCMT110208-FM4 Full designation: TCMT110208-FM4 WSM10S Manufacturer: Walter Tools Series: Tiger-tec Silver Core Measurements Clearance angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Materials & Features Coating / Grade: Tiger·tec Silver / WSM10S Chipbreaker: FM4 Execution: T Suitable for: stainless steels (M), heat-resistant superalloys and titanium (S) Material group suitability: S / M FAQ What materials is this insert suitable for? The TCMT110208-FM4 WSM10S is suitable for stainless steels (M) and heat-resistant superalloys/titanium (S), making it appropriate where toughness and heat resistance are required. How does the FM4 chipbreaker benefit the machining process? The FM4 chipbreaker on the TCMT110208-FM4 WSM10S promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of built-up edge during continuous machining. Why is the Tiger·tec Silver coating important? The Tiger·tec Silver coating on the TCMT110208-FM4 WSM10S enhances thermal resistance and lowers friction at the cutting edge, resulting in reduced wear and longer tool life under demanding conditions. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius provides a robust cutting edge on the TCMT110208-FM4 WSM10S, offering better resistance to chipping and more stable performance in interrupted or heavy cuts. Can the insert be used in standard indexable turning holders? Yes, the triangular 60° form and the specified tolerance class of the TCMT110208-FM4 WSM10S ensure compatibility with common indexable turning holders for straightforward integration. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110208-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, a 0.8 mm corner radius and a 7° relief for reliable machining of stainless steel and superalloys; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208-FM4 WSM20S indexable insert for drilling and turning — Tiger‑tec Silver, 7° relief (Walter Tools) The TCMT110208-FM4 WSM20S is an indexable insert designed for demanding turning and bore-up applications, optimised for stainless steel and high-temperature alloys; its triangular 60° form and FM4 chipbreaker enable stable chip control in tough cutting conditions. Tiger‑tec Silver coated carbide Suitable for stainless steel and superalloys 7° relief for secure cutting Triangle 60° insert, 0.8 mm corner radius Increased productivity on tough-to-machine materials The coated-carbide grade WSM20S is engineered to improve productivity when working with challenging alloys. Thanks to the Tiger‑tec Silver coating and a geometry tailored for heat resistance, the insert promotes stable cutting edges and reduced wear when machining stainless steel and heat-resistant superalloys. This yields longer tool life and fewer index changes, which supports uninterrupted production cycles and lowers process costs. Coating and chip control that reduce rework A combination of Tiger‑tec Silver surface treatment and the FM4 chipbreaker focuses on predictable chip formation and thermal management at the cutting zone. Predictable chips lower the risk of built-up edge and surface damage, so finishing operations are less frequent. The insert’s design converts coating and geometry into tangible process benefits: improved surface quality and reduced hand‑finishing for machined components. Geometry that enhances dimensional stability The triangular 60° form with a 0.8 mm corner radius and a 7° relief angle offers a balance between edge strength and cutting access. The compact inscribed circle and precise edge preparation help maintain repeatable results in interrupted cuts and when entering or exiting a bore. This geometry supports consistent part tolerances and contributes to reproducible machining cycles in batch production. Application scope and process compatibility Rated for ISO groups M and S, the insert covers stainless steel and high‑temperature alloys, making it suitable for sectors that demand heat‑resistant performance and robust edge control. The designation and tolerance class M indicate suitability for materials prone to workhardening and thermal strain. Integration into standard toolholders for drilling and turning is straightforward, enabling rapid deployment in existing setups without extensive tooling changes. For reliable machining of stainless steel and superalloys, specify the TCMT110208-FM4 WSM20S from Walter Tools and contact Metav Werkzeuge for ordering or technical consultation: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: TCMT110208-FM4-WSM20S-WALTER Product type: Indexable insert for drilling and turning Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Inscribed circle: 11 mm Thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM4 Plate form: Triangle 60° Series: Tiger‑tec Silver Material applicability: S / M Application: Suitable for stainless steel and heat‑resistant superalloys FAQ What materials is this insert suitable for? The TCMT110208-FM4 WSM20S is specified for ISO groups M and S, which covers stainless steel and heat‑resistant superalloys. How does the Tiger‑tec Silver coating help tool life? The Tiger‑tec Silver coating on the WSM20S grade increases thermal resistance and wear protection, resulting in more stable cutting edges and extended insert life. Which chipbreaker is integrated and what is its benefit? The insert uses the FM4 chipbreaker; it promotes controlled chip formation and reduces the risk of built‑up edge during interrupted cuts. Is this insert compatible with standard turning holders? Yes, the triangular 60° geometry and the TCMT specification make the insert compatible with common indexable turning and drilling holders designed for this insert family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCMT110208-FM6 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver grade and the optimised FM6 chipbreaker for controlled chip formation and extended tool life; the triangle 60° form with a 0.8 mm corner radius delivers stable turning in stainless steels and heat‑resistant alloys. Order the TCMT110208-FM6 WSM20S directly via Metav Werkzeuge or consult our specialists for tailored machining advice. TCMT110208-FM6 WSM20S — Walter Tools turning insert, Tiger‑tec Silver, FM6 chipbreaker A TCMT110208-FM6 WSM20S turning insert engineered for secure chip control and durable cutting performance when machining stainless steels and heat‑resistant superalloys Tiger‑tec Silver coated carbide Optimised FM6 chipbreaker Triangle 60° with 0.8 mm corner radius 7° relief angle for general turning Consistent chip control for difficult-to-cut materials The WSM20S grade from the Tiger‑tec Silver series is a coated carbide designed to master the particular challenges of stainless steels and heat‑resistant superalloys. The applied coating improves heat resistance and reduces edge wear under thermal stress, while the FM6 chipbreaker promotes predictable chip segmentation. In industrial turning, controlled chips reduce stoppages, protect the workpiece surface and extend the life of the toolholder. The combination of grade and chipbreaker therefore translates technical features into measurable production stability. Robust cutting edge that supports higher productivity The triangular 60° form with a 0.8 mm corner radius provides a balance between edge strength and surface finish. A larger corner radius reinforces the cutting edge against mechanical and thermal loads, lowering the risk of chipping in interrupted cuts and when machining tough alloys. The specified 7° relief angle reduces rubbing and tool warming without sacrificing rigidity. Together, these geometrical choices yield a secure cutting edge that helps maintain consistent component quality and reduces the need for frequent insert changes. Clear application guidance for process planning Marked for ISO material groups M and S, this indexable insert is suited to machining rostfreie Stähle (stainless steels) and heat‑resistant superalloys including titanium alloys. For best results, pair the insert with appropriate cutting data for the workpiece, moderate cutting speeds and suitable cooling strategy to control temperature at the cutting zone. The insert’s design supports productive roughing and finishing passes in demanding materials, delivering stable chip formation and repeatable results for batch production or specialised components. Contact Metav Werkzeuge to discuss cutting parameters and to secure Walter Tools Tiger‑tec Silver inserts for reliable stainless steel turning — reach Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT110208-FM6-WSM20S-WALTER Label: Drehwendeschneidplatte TCMT110208-FM6 WSM20S Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM20S Facts Material group suitability: S / M Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Chipbreaker: FM6 Tolerance class: M Special features Coating technology: Tiger‑tec Silver Coated carbide grade Designed for stainless steels and heat‑resistant superalloys Stable chip formation and reliable cutting edge FAQ Is this insert suitable for stainless steels? Yes. The TCMT110208-FM6 WSM20S insert from Walter Tools is specified for ISO material group M and is engineered to handle the thermal and mechanical demands of stainless steels. What does the FM6 chipbreaker do? The FM6 chipbreaker on this insert promotes controlled chip segmentation and evacuation, improving process reliability and reducing the likelihood of built‑up edge when machining tough alloys. Which materials are recommended for this grade? The WSM20S grade is intended for stainless steels and heat‑resistant superalloys (ISO groups M and S), where heat resistance and edge stability are critical. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius strengthens the cutting edge for heavier cuts and interrupted machining while maintaining a satisfactory surface finish, supporting longer tool life and fewer index changes. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
TCMT110208-FM6 WSM30S T Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating, the WSM30S grade and the FM6 chipbreaker to secure consistent performance on rostfreier Stahl and heat-resistant alloys; order the insert via Metav Werkzeuge or consult the specialists for cutting data and holder compatibility. TCMT110208-FM6 WSM30S Turning Indexable Insert (Triangle 60°, 0.8 mm Radius) – Walter Tools The TCMT110208-FM6 WSM30S is a triangular turning insert engineered for machining rostfreier Stahl and superalloys, combining the Tiger·tec Silver coating with an FM6 chipbreaker for improved edge stability and chip control. Tiger·tec Silver coated grade WSM30S Designed for rostfreier Stahl and superalloys FM6 chipbreaker for controlled chip formation 7° relief, 0.8 mm corner radius, triangle 60° High-process reliability for hard-to-machine materials The combination of the WSM30S cutting grade and the Tiger·tec Silver coating is designed to extend tool life where heat and adhesion threaten performance. In practice, this coated carbide grade is optimised for materials that generate high temperatures and tend to build up on the cutting edge; the coating and substrate pairing reduces flank wear and supports a stable cutting edge under thermal stress. The FM6 chipbreaker contributes to predictable chip shapes, which reduces vibration and keeps cycle times consistent. This results in fewer interruptions and a more reliable production flow when turning rostfreier Stahl or high-temperature alloys. Measurable machining advantages and technical fit With a relief angle of 7° and a corner radius of 0.8 mm, the insert balances edge strength and cutting force to support both medium-stock removal and finishing passes. The triangular 60° geometry offers three indexed cutting corners, which improves cost-efficiency per insert by enabling multiple repositions before replacement is required. The FM6 chipbreaker is optimised for controlled chip formation in ductile, heat-prone materials, meaning that chip evacuation and surface integrity are improved without sacrificing tool life. These design choices are aimed at delivering repeatable, quantifiable benefits on the shop floor. Practical benefits for workshop productivity The insert is supplied in the industry-standard TCMT form factor and is compatible with a wide range of triangular insert holders, simplifying tool-change logistics. Because chip behaviour is stabilised by the FM6 geometry and the coated grade handles thermal loads well, cycle reliability is increased and tool change frequency is reduced. For production environments running rostfreier Stahl and superalloys, this contributes to lower downtime and improved overall equipment effectiveness. The indexable insert format allows quick corner indexing and straightforward inventory management. Selection guidance and application notes Tolerance class M and the execution marked as T indicate the insert’s suitability for machining rostfreier Stahl (ISO group M) and for operations where edge robustness is required. The Tiger·tec Silver series is particularly effective when machining materials that are prone to built-up edge and work hardening; its enhanced adhesion resistance supports longer intervals between interventions. For specific feeds, speeds and insert seat recommendations, consult Metav Werkzeuge to match holder geometry and clamping parameters to the intended operation. Secure process stability and improved uptime with Walter Tools Tiger·tec Silver inserts — contact Metav Werkzeuge for tailored application advice and supply coordination. Technical data SKU: TCMT110208-FM6-WSM30S-WALTER Article designation: TCMT110208-FM6 WSM30S Product type: Turning indexable insert Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FM6 Grade: WSM30S (coated carbide) Material suitability: rostfreier Stahl; superalloys and titanium (ISO group S) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suited for? The TCMT110208-FM6 WSM30S insert is designed primarily for rostfreier Stahl and for heat-resistant superalloys and titanium, offering a grade and coating combination tailored to those material groups. How does the FM6 chipbreaker help in production? The FM6 chipbreaker produces short, controllable chips and supports stable cutting forces, which improves chip evacuation and reduces the risk of built-up edge during continuous turning operations. Which features improve edge life at high temperatures? The Tiger·tec Silver coating on the WSM30S grade enhances thermal and adhesive resistance, helping to maintain a stable cutting edge and extend tool life under elevated temperatures. Is this insert compatible with standard triangular holders? Yes, the TCMT form factor and triangle 60° geometry are compatible with common triangular insert holders; verification of seat angle and clamping style is recommended before fitting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
TCMT110208-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
High-performance coated carbide insert with an FP4 chipbreaker and a 0.8 mm corner radius for stable, repeatable turning in steel; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application support. TCMT110208-FP4 WPP10G turning indexable insert for steel — Tiger·tec Gold, FP4, Walter Tools A TCMT110208-FP4 WPP10G triangular indexable insert engineered for precise turning and boring in steel, combining a Tiger·tec Gold coating with a controlled-chip geometry for consistent productivity. Tiger·tec Gold coated cemented carbide FP4 chipbreaker for reliable chip control Triangle 60° insert for secure clamping 0.8 mm corner radius for robust cutting edge Consistent chip control and material suitability for steel The insert is manufactured in the WPP10G grade within the Tiger·tec Gold family, a coated cemented carbide formulation optimised for machining steels (ISO group P). The integrated FP4 chipbreaker provides controlled chip formation across a broad range of turning conditions, reducing interruption from long or stringy chips and improving process stability. Because the grade is tailored to the thermal and deformation behaviour of steels, the combination of coating and chip geometry results in predictable wear patterns and a repeatable tool life, which supports efficient production planning in series turning operations. Longer tool life and productivity through advanced coating The Tiger·tec Gold coating on this insert increases resistance to abrasive and adhesive wear, which directly extends cutting-edge life and reduces tooling changes. The 0.8 mm corner radius contributes to a stronger cutting edge that tolerates moderate interrupted cuts and edge exposure, while the coated substrate maintains surface integrity under continual contact. These factors translate into fewer tool swaps, lower per-part tooling cost and more consistent component quality — advantages that contribute to shorter cycle times and improved overall machining economy. Geometry and clamping for accurate, repeatable results Designed in a Triangle 60° form, the insert offers stable seating and three usable cutting edges per indexable piece, enabling economical edge rotation. The positive 7° clearance angle supports effective cutting in steel by reducing rubbing and helping to control cutting forces, while the insert dimensions (notably the 11 mm inscribed size and nominal 2 mm thickness) suit a wide range of standard toolholder pockets for turning and boring applications. These geometric attributes ensure predictable engagement, straightforward set-up and sustained dimensional accuracy over production runs. Application range and practical advantages in the workshop As a grade focused on steel machining, the insert covers applications from wear-resistant to tougher steel conditions, offering a balance between wear resistance and toughness that is suitable for general finishing and semi-finishing operations. The FP4 chipbreaker and the coated substrate aid chip evacuation and surface finish, reducing secondary operations and rework. Where high process reliability and consistent surface quality are priorities, this insert provides a pragmatic solution that supports high throughput without sacrificing part reproducibility. Contact Metav Werkzeuge for tailored application advice and to source genuine Walter Tools Tiger·tec Gold inserts for reliable steel turning solutions Technical Data Article number: TCMT110208-FP4-WPP10G-WALTER Designation: TCMT110208-FP4 Grade: WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Product type: turning / drilling indexable insert Facts Corner radius: 0.8 mm Clearance angle: 7° Insert form: Triangle 60° Inscribed size: 11 mm Thickness: 2 mm Chipbreaker: FP4 Tolerance class: M Special features Coating: Tiger·tec Gold Material application: Steel (ISO P) Substrate: coated cemented carbide Execution: T Wendeplatte ISO designation: TCMT110208-FP4 WPP10G FAQ What steels is this insert best suited for? The TCMT110208-FP4 WPP10G is formulated for ISO group P (steel), covering unalloyed and alloyed steels and offering a balance between wear resistance and toughness for finishing and semi-finishing. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker produces controlled chips that evacuate reliably in typical turning conditions, improving process stability and reducing the risk of entanglement or frequent interruptions. How many usable cutting edges are available per insert? A triangular 60° insert provides three indexed cutting edges, allowing economical rotation and extended service life before replacement. Is this insert compatible with standard toolholders for TCMT geometry? The insert follows the TCMT110208 form; it is compatible with toolholders designed for that indexable geometry and clamping, enabling straightforward integration into existing tool systems. What performance benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances wear resistance and thermal stability on the cutting edge, which helps to prolong tool life and maintain consistent surface finish in steel turning applications. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only; there is no affiliation between our company and the cited brands. The offered item is an original, factory-new product from the manufacturer (Walter Tools). Manufacturer: Walter Tools; The Walter AG (brand: Walter Tools), headquartered in Tübingen, Germany; part of the Sandvik Group
TCMT110208-FP4 WPP20G T Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WPP20G grade together with a 7° relief angle and triangle geometry for reliable steel turning and boring; order the insert directly via Metav Werkzeuge or consult the specialists for process recommendations. TCMT110208-FP4 WPP20G – Indexable insert for turning and boring, Tiger‑tec Gold coating (Walter Tools) A TCMT110208-FP4 WPP20G indexable insert engineered for versatile steel machining, offering stable cutting performance in general turning and boring operations. Tiger‑tec Gold coated grade WPP20G 7° relief angle for reliable cutting Triangle 60° form with 0.8 mm nose radius Optimised for steel applications (ISO P) Consistent cutting performance for steel components The coated carbide composition and the specific WPP20G grade are designed for machining unalloyed and alloyed steel under typical heat and chip-formation conditions. The result is stable cutting behaviour, reduced flank wear and predictable tool life, which supports higher productivity and fewer unexpected tool changes. For production environments that prioritise throughput, this offers a measurable improvement in process efficiency and repeatability. Durable coating technology that reduces downtime The Tiger‑tec Gold coating provides a wear-resistant surface that helps maintain a sharp cutting edge over extended cycles. This coating technology is particularly effective where heat generation and abrasive wear are common, contributing to longer edge life and fewer interruptions for insert replacement. The economic benefit is lower tooling costs per manufactured part and improved machine utilisation. Geometry engineered for chip control and surface quality A triangle 60° insert shape combined with the FP4 chipbreaker and a 0.8 mm nose radius delivers reliable chip control and a stable contact area for consistent surface finish. The moderate nose radius balances robustness and finish capability, enabling both roughing and light finishing passes without frequent tool swaps. The 7° relief angle reduces rubbing and minimises heat transfer into the workpiece, preserving dimensional accuracy. Seamless integration into manufacturing workflows The indexable format and standard ISO-style designation simplify inventory and setup, while the insert’s material designation for ISO P (steel) ensures straightforward selection for steel-focused operations. Compatibility with common toolholders reduces lead time for tooling changes and supports just-in-time operations. Where process support is needed, technical consultation is available to adapt cutting parameters and maximise the insert’s potential within existing machining cycles. For higher process reliability with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for availability and tailored cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT110208-FP4-WPP20G-WALTER Article designation: TCMT110208-FP4 ISO designation: TCMT110208-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Product type: Indexable insert for drilling/boring and turning Core numerical data Relief angle: 7° Nose radius: 0.8 mm Insert form: Triangle 60° Insert size/length: 11 Thickness code: 02 Tolerance class: M Special features and applications Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: FP4 Material suitability: Steel (ISO P) Execution: T (form/execution code) Intended use: general steel turning and boring FAQ What materials is this insert suitable for? The TCMT110208-FP4 WPP20G insert is specified for steel applications (ISO P); the WPP20G grade and Tiger‑tec Gold coating are tuned for the heat and chip formation typical of steel machining. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold increases wear resistance and edge stability on the TCMT110208-FP4, which extends service life and reduces downtime from insert changes. What role does the 0.8 mm nose radius play? A 0.8 mm nose radius offers a balance between a durable cutting edge and the ability to achieve a consistent surface finish, making the insert suitable for both roughing and light finishing. Is the FP4 chipbreaker suitable for long continuous cuts? The FP4 chipbreaker on this insert is designed to promote controlled chip formation and evacuation during steady cutting, supporting continuous turning operations when combined with appropriate cutting parameters. Can this insert be used in existing toolholders? The insert follows ISO-style designation and triangle form, which facilitates integration into many standard toolholder systems designed for this insert family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
TCMT110208-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, the wear-resistant WPP20G grade and the FP6 chipformer, this insert delivers reliable chip control and extended tool life in steel machining; order the TCMT110208-FP6 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208-FP6 WPP20G — Triangle turning/boring insert, 7° clearance, for steel (ISO P) — Walter Tools TCMT110208-FP6 WPP20G is a triangular indexable insert designed for productive turning and boring operations on steel, combining Tiger·tec Gold coating with a stable FP6 chipformer. Tiger·tec Gold coating for long tool life Suitable for steel machining (ISO P) Triangular 60° insert with 0.8 mm nose radius 7° clearance angle and FP6 chipformer High-performance coating and material for consistent production results The coated cemented carbide grade, belonging to the Tiger·tec Gold family, is engineered to provide stable wear resistance and consistent cutting behaviour when machining steels. The WPP20G grade combines a wear-oriented composition with a modern coating system, which reduces flank wear and supports repeatable surface finish. The insert’s FP6 chipbreaking geometry is optimised for predictable chip formation during medium to heavy cuts, so machining cycles can be planned with fewer interruptions for chip clearance. Technical features such as the 7° relief and the 0.8 mm nose radius contribute to a balanced compromise between strength and edge definition. Productivity and process reliability for demanding shop workflows With its triangular 60° form, the insert offers three usable corners, enabling efficient index changes and lower tooling costs per cutting edge. The FP6 chipformer ensures manageable chip shapes, which supports higher metal removal rates and reduces the risk of built-up edge on unalloyed and alloyed steels. The result is a more productive turning or boring process with fewer tool changes and predictable tool-life behaviour. The combination of a robust cutting edge and the proven coating system aids in maintaining dimensional stability over longer series runs, which is particularly valuable in batch production and job-shop environments. Application guidance and compatibility with steel machining Classified for ISO group P (steel), the insert is suitable for a wide range of unalloyed and alloyed steels where standard chip control and wear resistance are required. The triangular geometry (60°) and the 0.8 mm nose radius provide a good balance for general turning tasks, while the 7° clearance reduces rubbing and heat generation at the flank, improving surface finish quality. The cutting grade is coated, which enhances resistance against abrasion and thermal loads commonly encountered when machining steels; this makes the insert a practical choice for both finishing and medium roughing operations where stable chip control is essential. Contact Metav Werkzeuge for tailored advice and procurement of Walter Tools TCMT110208-FP6 WPP20G; eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: TCMT110208-FP6-WPP20G-WALTER SKU: TCMT110208-FP6-WPP20G Designation: TCMT110208-FP6 Full designation: TCMT110208-FP6 WPP20G Core specifications Relief angle: 7° Nose radius: 0.8 mm Inscribed circle / size: 11 mm Plate thickness code: 02 Special features Coating system: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipformer: FP6 Geometry: Triangle 60° Material application: Steel (ISO P) Manufacturer: Walter Tools FAQ What materials is this insert designed for? The TCMT110208-FP6 WPP20G is specified for steel applications (ISO P), covering unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the TCMT110208-FP6 WPP20G improves wear resistance and thermal stability, helping to maintain tool life and surface finish during steel turning. What chip control can be expected with the FP6 chipformer? The FP6 chipformer on this insert produces controlled chips suited to general turning and medium removal rates, supporting continuous machining with fewer interruptions. Is the triangular shape advantageous for series production? Yes, the triangle 60° form provides three indexed cutting corners per insert, which reduces tooling costs per effective cutting edge and simplifies re-indexing in series work. Which features contribute to surface quality in finishing operations? Features such as the 0.8 mm nose radius and the 7° clearance angle on this insert help reduce rubbing and promote a stable cutting action that supports consistent surface finishes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods of Walter Tools.
TCMT110208-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the FW4 chipbreaker for reliable chip control and a 7° clearance angle for consistent turning of steel; order the insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. TCMT110208-FW4 WPP10G indexable turning insert — robust Tiger·tec Gold grade, FW4 chipbreaker, triangular 60° TCMT110208-FW4 WPP10G is an indexable turning insert designed for productive steel turning in general machining applications Tiger·tec Gold coating FW4 chipbreaker for stable chips 7° free clearance angle Triangular 60° form, 0.8 mm corner radius Stable chip control for uninterrupted turning The combination of a dedicated FW4 chipbreaker and the Tiger·tec Gold coating produces controlled chip formation during medium to heavy cuts in steel. This geometry reduces the risk of long, stringy chips that can foul the tool path, while the coated cemented carbide grade improves thermal resistance and reduces flank wear. As a result, cycle times remain consistent and tool changes are less frequent, supporting smoother production flow and higher uptime in batch turning. Designed to extend tool life in steel machining The insert’s WPP10G grade, a coated cemented carbide from the Tiger·tec Gold family, is optimised for the heat and chip characteristics of steels (ISO group P). The grade balances hardness and toughness to resist abrasive wear while maintaining a robust cutting edge. Combined with the 0.8 mm corner radius and the 7° clearance angle, the geometry supports stable cutting forces and reproducible surface finishes, which helps reduce rework and increases the number of parts produced per insert. Precise mounting and repeatable setups for workshop efficiency The triangular 60° form offers three effective cutting edges per indexable insert, enabling quick indexing and economical use of the carbide. The standard size and 02 thickness code allow consistent clamping in common toolholders, while the medium tolerance class M ensures interchangeability across machines. These attributes simplify tool management, speed up changeovers and support predictable process planning for production environments that value repeatability. For application-specific recommendations or to request cutting data for the Walter Tools TCMT110208-FW4 WPP10G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation and fast delivery coordination. Technical Data Article number: TCMT110208-FW4-WPP10G-WALTER Name: TCMT110208-FW4 WPP10G Product type: Indexable turning insert Grade: WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Size: 11 Thickness: 02 Corner radius: 0.8 mm Clearance angle: 7° Insert form: Triangular 60° Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: FW4 Base material: Coated cemented carbide Execution: T Application group: P (steel) FAQ What materials is this insert suitable for? The TCMT110208-FW4 WPP10G insert is specified for the ISO P group, meaning it is intended primarily for the machining of steel including unalloyed and alloyed steels. Which chip control can be expected from this insert? The FW4 chipbreaker on the Tiger·tec Gold grade provides stable chip formation under typical turning conditions for steel, improving process security and reducing interruptions. What are the geometry and size details of the insert? The insert is triangular (60°) with a size code of 11, thickness 02, and a corner radius of 0.8 mm, offering three usable cutting edges and straightforward indexing. Is the insert suitable for stainless steel or pre-hardened materials? Stainless steel and pre-hardened material suitability are not specified for this grade in the provided data; selection should be validated against the workpiece material and machining parameters. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating enhances thermal resistance and wear performance on steel, which typically leads to longer tool life and improved surface finish during sustained production runs. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), with headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110208-FW4 WPP20G Tiger-tec Gold Wendeplatten - Walter Tools
Efficient steel turning is achieved with the Tiger‑tec Gold grade and the FW4 chipbreaker combined in a compact triangular geometry; order the TCMT110208‑FW4 WPP20G insert or consult Metav Werkzeuge for application advice and availability. TCMT110208‑FW4 WPP20G indexable turning insert for steel, Tiger‑tec Gold – Walter Tools The TCMT110208‑FW4 WPP20G is a triangular, 60° indexable turning insert designed for reliable machining of steel; its Tiger‑tec Gold grade and FW4 chipbreaker optimise wear resistance and chip control for general turning tasks. Tiger‑tec Gold coating for extended life FW4 chipbreaker for stable chip control 7° clearance angle for secure cutting 0.8 mm corner radius for versatile turning Consistent cutting performance for steel turning The combination of the Tiger‑tec Gold coating and the WPP20G grade provides a balance of wear resistance and toughness tailored to steel (ISO P). The coating reduces flank and crater wear under typical turning temperatures, which means longer intervals between index changes and more predictable component tolerances. The FW4 chipbreaker supports even chip formation during continuous cuts, improving process reliability and reducing the risk of built‑up edge. These technical traits translate into higher productivity and fewer interruptions on medium‑duty production runs. Better edge security and predictable tool life A 0.8 mm corner radius together with a 7° clearance angle gives a robust cutting edge that resists chipping while maintaining acceptable surface finish. The M tolerance class ensures consistent seating and repeatable geometry at every index, which is important for series production and quick tool changes. In practice, this means fewer rejected parts and stable machining results over longer tool life. The coated carbide composition inherent in this grade offers improved resistance to abrasive wear without sacrificing the edge strength required for interrupted cuts common in steel turning. Geometry and chip control that simplify set‑up The triangular 60° plate form provides three usable cutting edges per indexable insert, supporting cost‑efficient use of the blank. The FW4 chipbreaker is engineered to promote short, curlable chips in steel, reducing the need for complex chip management or special fixturing. Because of this geometry and chip formation behaviour, standard turning operations such as profile, shoulder and light roughing benefit from predictable forces and easier evacuation of chips. For shops transitioning between materials, the variety of cutting edge radii and chipbreaker designs in the same series allows straightforward tool selection. Practical advantages for everyday production The compact design and the clear material specification (suitable for steel, ISO P) make the insert a practical choice for general workshop and production environments where versatility and reliability matter. The item designation and series affiliation support fast identification in tool libraries and ERP systems, helping to reduce ordering errors and maintain consistent stock levels. With a focus on process security and repeatable results, the insert suits manufacturers seeking an economical yet robust turning solution. For expert application guidance on Walter Tools Tiger‑tec Gold inserts or to secure the TCMT110208‑FW4 WPP20G for demanding steel turning, contact Metav Werkzeuge for fast, practical advice and availability Technical Data Article number: TCMT110208-FW4-WPP20G-WALTER Label: Drehwendeschneidplatte TCMT110208-FW4 WPP20G Walter Tools Product type: Drehwendeschneidplatte UID: TCMT110208-FW4-WPP20G-WALTER Facts Plate form: Triangular 60° Plate size: 11 Plate thickness: 02 Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: M Special features Chipbreaker: FW4 Grade: WPP20G Series: Tiger‑tec Gold Material application: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The TCMT110208‑FW4 WPP20G insert in the Walter Tools Tiger‑tec Gold series is specified for machining steel (ISO P), offering an optimised balance of wear resistance and toughness for unalloyed and alloyed steels. What benefit does the FW4 chipbreaker provide? The FW4 chipbreaker promotes controlled chip formation and evacuation during turning of steel, which improves process stability and reduces the likelihood of chip‑related interruptions when using this turning insert. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius gives increased edge strength compared with finer radii, making it suitable for general turning where a compromise between surface finish and robust performance is required. Why is Tiger‑tec Gold relevant for production? The Tiger‑tec Gold series features a coated carbide grade designed to extend tool life and maintain cutting edge stability under typical steel turning temperatures, supporting consistent component quality and longer intervals between index changes. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TCMT110208-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, an FW4 chipbreaker and a 0.8 mm corner radius for stable chip control and reliable machining of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our team for application-specific recommendations. TCMT110208-FW4 WSM20S – Indexable turning insert, Tiger·tec Silver, Walter Tools The TCMT110208-FW4 WSM20S is an indexable turning insert engineered for turning stainless steels and heat‑resistant superalloys, offering a FW4 chipbreaker and a 7° relief angle for controlled cutting in demanding conditions. Tiger·tec Silver coated carbide insert Designed for stainless steels and superalloys FW4 chipbreaker for secure chip control Triangle 60° with 0.8 mm corner radius Reliable cutting in demanding materials The insert combines a Tiger·tec Silver coating with a specially developed carbide grade to support secure chip formation when machining tough-to-cut materials. The WSM20S grade is optimised for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), where poor thermal conductivity and workpiece toughness place high demands on the cutting edge. As a result, the component promotes stable cutting behaviour and reduces the risk of built‑up edge, which in turn helps to maintain component quality and extend tool life for longer production runs. Geometry that stabilises the process and surface quality The combination of the FW4 chipbreaker, Triangle 60° plate form and corner radius 0.8 mm provides mechanical stability and predictable chip flow. The moderate relief angle 7° supports a secure seating in standard toolholders while helping to reduce radial deflection under cutting load. Together these geometric details contribute to consistent surface finishes and dimensionally repeatable results, making the insert suitable for demanding finishing and semi‑finishing operations where process stability is essential. Practical benefits on the shop floor With tolerance class M and a clear series identity in the Tiger·tec Silver family, the insert supports repeatable mounting and straightforward tool management. The FW4 chipbreaker assists coolant access and chip control across a range of feeds, while the coated surface improves wear resistance in thermally challenging applications. For production environments working with duplex stainless steels, austenitic grades or nickel‑based alloys, the insert delivers a cost‑effective route to consistent productivity and reduced rework rates. For tailored advice on using the Walter Tools TCMT110208-FW4 WSM20S in specific components or machines, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will help verify suitability and cutting data for the intended application. Technical data SKU: TCMT110208-FW4-WSM20S-WALTER Article code: TCMT110208-FW4 Name: TCMT110208-FW4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 11 Thickness designation: 02 Tolerance class: M Special features Chipbreaker: FW4 Coating: Tiger·tec Silver (coated carbide) Material suitability: stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S) Intended use: indexable turning insert for demanding turning applications FAQ What workpiece materials is this insert designed for? The TCMT110208-FW4 WSM20S is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), where the Tiger·tec Silver grade supports stable chip formation and edge integrity. How does the FW4 chipbreaker influence machining? The FW4 chipbreaker promotes predictable chip control and coolant interaction; in practice, this leads to improved surface finish and reduced risk of chip entanglement during continuous turning operations with the Walter Tools insert. Is the insert compatible with standard toolholders for triangular plates? Yes. The triangle 60° plate form and standard designation ensure compatibility with common toolholders designed for TCMT-style triangular inserts, supporting secure seating and repeatable positioning. Which features help to extend tool life in high‑temperature applications? The Tiger·tec Silver coating combined with the WSM20S carbide grade enhances heat resistance and wear control, which helps to extend edge life when machining heat‑retaining materials such as nickel alloys or certain stainless steels. What tolerance and size information should be considered for tool setup? Observe the tolerance class M and the plate size 11 along with the 0.8 mm corner radius and 7° relief angle when selecting toolholders and setting up cutting parameters for consistent results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer (Walter Tools).
TCMT110208-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated WKK10S carbide grade and a tailored MK4 chipbreaker for productive cast iron machining; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT110208-MK4 WKK10S – Triangular indexable insert TCMT110208-MK4 WKK10S for cast iron by Walter Tools The TCMT110208-MK4 WKK10S is a 60° triangular indexable insert designed for high‑productivity turning and boring of cast iron, combining a Tiger·tec Silver coated carbide grade with a chipbreaker optimised for short, brittle chips. Tiger·tec Silver coated carbide grade WKK10S Optimised for cast iron (ISO K) MK4 chipbreaker for reliable chip control Triangle 60° with 0.8 mm corner radius Higher throughput through coating and grade synergy The combination of the Tiger·tec Silver coating and the WKK10S grade delivers high wear resistance specifically against the abrasive nature of cast iron. This tailored material pairing reduces flank wear and extends tool life under intermittent cutting conditions typical for cast components. The result is measurable productivity gains and fewer insert changes during production runs, which translates directly into lower process downtime and improved overall equipment effectiveness. Consistent part quality from precision geometry The triangular 60° geometry with a 0.8 mm corner radius and a 7° relief angle provides a robust cutting edge that balances strength and surface finish. The relatively large corner radius supports stable cutting in interrupted cuts, while the geometry still permits acceptable surface results on ferritic and grey cast irons. The MK4 chipbreaker actively shapes short, controllable chips, reducing the risk of chip entanglement and improving process reliability in automated and manual operations. Industrial readiness and application guidance Belonging to the Tiger·tec Silver series and manufactured by Walter Tools, this insert is specified with tolerance class M, thickness designation 02 and a compact plate size of 11. The insert is explicitly intended for machining cast iron (ISO group K) and is suitable for workshops and production lines seeking repeatable performance and straightforward tool handling. For selection of the correct holder and cutting data, Metav Werkzeuge provides technical support and application recommendations to match cutting speed, feed and depth of cut to the workpiece and machine capability. Contact Metav Werkzeuge for tailored cutting data and application support for Walter Tools TCMT110208-MK4 WKK10S inserts for cast iron machining Technical Data Article number: TCMT110208-MK4-WKK10S-WALTER Name: TCMT110208-MK4 WKK10S Manufacturer: Walter Tools Series: Tiger-tec Silver Specifications Relief angle: 7° Corner radius: 0.8 mm Insert size: 11 Shape: Triangle 60° Thickness designation: 02 Tolerance class: M Features Grade: WKK10S Coating: Tiger·tec Silver Chipbreaker: MK4 Material suitability: Cast iron (ISO K) Application: Turning / boring indexable insert FAQ What materials is this insert designed for? The TCMT110208-MK4 WKK10S insert is designed primarily for cast iron applications (ISO group K), where the WKK10S grade and Tiger·tec Silver coating resist abrasive wear. How does the MK4 chipbreaker improve machining? The MK4 chipbreaker on this triangular insert shapes short, brittle chips typical of cast iron, enhancing chip control and reducing interruptions in production caused by long or tangled swarf. Which geometry features support interrupted cuts? The 60° triangular form combined with a 0.8 mm corner radius and a 7° relief angle provides a robust cutting edge that tolerates interrupted cutting and maintains surface quality. Is this insert suitable for automated machining centres? Yes. The insert’s chip control, coated carbide grade and tolerance class M make it appropriate for automated turning and boring operations where process stability and repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation and identification of compatibility. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TCMT110208-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKK20S grade for durable, productive cast‑iron turning; the MK4 chipbreaker and a 7° relief angle ensure controlled chip formation and reliable edge life. Order directly via Metav Werkzeuge or ask the consultants for application support. TCMT110208‑MK4 WKK20S – indexable turning insert, Tiger‑tec Silver coating for cast iron | Walter Tools TCMT110208‑MK4 WKK20S is a triangular 60° indexable insert with a 7° relief angle, designed for efficient machining of cast‑iron workpieces. Tiger‑tec Silver for improved wear resistance Optimised for cast‑iron machining ISO K Triangular 60° form with 0.8 mm corner radius MK4 chipbreaker for controlled short chips High wear resistance for abrasive cast‑iron work The combination of the Tiger‑tec Silver coating and the WKK20S carbide grade is tailored to the abrasive nature of cast‑iron materials (ISO K). The coating is engineered to reduce abrasive wear and improve thermal stability, which translates into longer edge life and fewer interruptions for index changes. Because many cast‑iron materials produce short, brittle chips, the insert’s geometry and grade are matched to maintain consistent cutting performance under interrupted cuts. This configuration supports a stable process and predictable part quality in series production. Consistent chip control and secure cutting geometry Mechanical stability is delivered by the MK4 chipbreaker together with the triangular 60° plate form and a 0.8 mm corner radius, producing short, controllable chips and reducing vibration on the toolholder. The 7° relief angle frees the cutting edge to run smoothly, while the plate size (11) and thickness code (02) provide a compact, rigid package that suits many toolholders. These design choices result in a reliable cutting edge that preserves dimensional accuracy and reduces the risk of built‑up edge or premature tool wear. Practical integration for productive turning lines Designed for industrial turning operations, the insert is supplied in the Walter Tools Tiger‑tec Silver series and is intended for productive machining of cast‑iron components where repeatable performance matters. The clear specification—grade WKK20S, MK4 chipbreaker and defined geometry—allows process engineers to select the insert with confidence for batch production or single‑part manufacturing. Cutting data should be chosen according to the workpiece grade and operation type; when set correctly, tool life and process stability are maximised, contributing directly to efficient cycle times and lower overall production costs. Contact Metav Werkzeuge for a tailored recommendation on integrating Walter Tools Tiger‑tec Silver inserts into the production process — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and cutting data Technical data SKU: TCMT110208-MK4-WKK20S-WALTER Designation: TCMT110208‑MK4 WKK20S Product type: Drilling/boring indexable insert / turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: triangular 60° Plate size: 11 Plate thickness code: 02 Tolerance class: M Special features Chipbreaker: MK4 Material group: cast‑iron (ISO K) Execution: T Material code: K Cast‑iron application: yes FAQ What materials is this insert best suited for? The TCMT110208‑MK4 WKK20S insert is optimised for cast‑iron machining (ISO K); the WKK20S grade and the Tiger‑tec Silver coating are chosen for abrasive wear resistance typical of these materials. How does the MK4 chipbreaker influence machining? The MK4 chipbreaker promotes short, consistent chips and improves chip control in interrupted or steady cuts, reducing the risk of entanglement and helping to maintain surface quality with the TCMT110208‑MK4 WKK20S insert. What does the 0.8 mm corner radius deliver in turning operations? A 0.8 mm corner radius balances edge strength and finish; it supports stable cutting forces and provides a good compromise between tool life and achievable surface quality when using the TCMT110208‑MK4 WKK20S insert. Can the triangular 60° form be used for profile and roughing operations? The triangular 60° geometry offers multiple indexed edges and rigidity that suit general turning and certain profiling tasks, while the grade and chipbreaker are geared towards efficient roughing in cast‑iron applications. How should the Tiger‑tec Silver coating be interpreted for process planning? The Tiger‑tec Silver coating enhances thermal stability and wear resistance, enabling higher productivity in abrasive environments; the coating with the WKK20S grade provides a good baseline for selecting cutting speeds and feeds for cast‑iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanatory purposes only. There is no connection between our company and the named manufacturers. The offered item is an original, factory‑new product from the stated manufacturer.
TCMT110208-MM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of a proven combination of thermal stability and reliable chip control for demanding turning operations; the Tiger·tec Silver grade and MM4 chipbreaker extend service life while maintaining consistent edge behaviour, reducing unplanned tool changes. Order original Walter Tools inserts through Metav Werkzeuge or consult our technical advisors for tailored cutting data. TCMT110208-MM4 WSM20S turning insert (triangle 60°, for rostfreier Stahl and superalloys) — Walter Tools The TCMT110208-MM4 WSM20S is a triangular, coated carbide turning insert designed for heavy-duty applications on rostfreier Stahl and heat-resistant superalloys, offering stable cutting performance under high thermal loads. Tiger·tec Silver coating for thermal stability Optimised MM4 chipbreaker for secure chip control Triangle 60° shape; 0.8 mm nose radius Suitable for rostfreier Stahl and high-temperature alloys Consistent productivity through thermal-stable grade technology The combination of the Tiger·tec Silver coating and the WSM20S grade produces controlled wear behaviour and improved heat resistance compared with uncoated alternatives. Coated carbide inserts protect the hard substrate against high cutting temperatures and abrasive wear; this means fewer tool changes and a lower cost per component in serial production. For machining rostfreier Stahl, which tends to generate heat and form built-up edges, the coated surface supports stable chip formation and reduces the risk of premature edge breakdown. The result is a measurable improvement in process stability and repeatability across batches. Geometry engineered to prevent downtime and improve surface finish A well-matched tool geometry is essential for predictable machining. The MM4 chipbreaker is tuned to guide and fragment chips reliably even under heavy cutting conditions, reducing interruptions from long swarf and the incidence of built-up edge. The triangle 60° insert form provides three usable cutting edges per indexation, while the 0.8 mm nose radius balances strength and achievable surface quality. The 7° clearance helps to avoid rubbing while keeping cutting forces within machine capabilities. Together, these features minimise reworking and extend productive runtime without compromising component finish. Application focus: where this insert adds the most value This insert is specified for work on rostfreier Stahl (ISO group M) and on demanding superalloys and titanium-type materials (ISO group S), as indicated by its material suitability codes S / M. It is particularly advantageous where heat generation and workpiece toughness place higher demands on the cutting edge. In practice, the insert supports stable turning in roughing and semi-finishing operations when used with appropriate cutting parameters and secure clamping. If additional cutting data or recommendations for toolholder geometry are required, Metav Werkzeuge’s technical team is available to provide machining guidance and suggested starting parameters. For high-demand rostfreier Stahl and superalloy turning tasks, opt for genuine Walter Tools Tiger·tec Silver inserts from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for customised advice and immediate availability Technical Data SKU: TCMT110208-MM4-WSM20S-WALTER Designation: TCMT110208-MM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Core specifications Clearance angle: 7° Nose radius: 0.8 mm Plate size: 11 Thickness code: 02 Plate form: Triangle 60° Materials & special features Coating technology: Tiger·tec Silver Chipbreaker: MM4 Material suitability: S / M (superalloys; rostfreier Stahl) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The TCMT110208-MM4 WSM20S insert from Walter Tools is suitable for rostfreier Stahl (ISO group M) and for heat-resistant superalloys and titanium alloys (ISO group S), as reflected by its S / M designation. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver enhances thermal resistance and wear behaviour on Walter Tools inserts, helping to maintain a stable cutting edge and extending effective tool life under high-temperature and adhesive wear conditions. When should the MM4 chipbreaker be selected? The MM4 chipbreaker on this insert is designed for secure chip control in heavy cutting and semi-finishing operations; it is recommended where reliable fragmentation and predictable swarf evacuation are required. How many cutting edges are available per insert and what is the typical application? The triangular 60° form provides three indexable cutting edges; this insert is commonly used in roughing and semi-finishing on rostfreier Stahl and superalloys where edge stability is critical. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110208-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, the versatile WPP10G grade for steel and a compact 60° triangular form to maintain steady productivity and predictable tool life; order directly via Metav Werkzeuge or contact our consultants for application advice. TCMT110208-MP4 WPP10G turning/boring insert, Tiger‑tec Gold, 7° clearance — Walter Tools TCMT110208-MP4 WPP10G is a triangular indexable insert designed for robust steel machining in turning and boring applications Tiger‑tec Gold coated for extended life Grade WPP10G optimised for steel machining Triangle 60° form for versatile tool platforms 7° clearance with 0.8 mm corner radius Longer tool life through optimised coating and grade The combination of the Tiger‑tec Gold coating and the WPP10G cutting grade delivers a measurable increase in wear resistance and process stability for steel machining. The surface treatment reduces adhesion and heat transfer at the cutting edge, which results in more consistent edge roundness and fewer unexpected tool changes. For operations that demand repeatable cycles and predictable tool life, this insert supports a reduction in downtime and tooling consumption while maintaining component tolerances. Predictable chip control and reliable machining performance Equipped with the MP4 chipbreaker, the insert promotes controlled chip formation during medium to heavy turning and boring of steel. The triangle 60° geometry provides three cutting corners per insert, improving economy per edge, while the 7° clearance angle helps to reduce rubbing and built‑up edge. These design choices contribute to stable cutting forces and improved surface finish, which supports higher productivity and simplified process parameter selection for machinists and programming engineers. Practical benefits for workshop workflows The modest 0.8 mm corner radius balances edge strength and surface quality, suitable for general turning where a compromise between robustness and finish is required. The insert size designation (11) and thickness code (02) make it compatible with standard toolholders that accept TCMT inserts, simplifying inventory management. As the insert is developed for steel applications, it is particularly suitable for unalloyed and alloyed steels where typical heat generation and chip behaviour must be controlled. Clear orientation and application guidance For production planning, the indexable design offers a straightforward cost calculation: multiple usable corners per insert and a wear‑resistant coating reduce per‑part tooling costs and extend intervals between changeovers. When selecting cutting parameters, prioritise stable clamping, correct depth of cut and feed for the chosen chipbreaker to exploit the WPP10G grade’s strengths. If further machining data or compatibility checks are required, technical guidance is available to ensure integration into existing toolplans. Contact Metav Werkzeuge for tailored application advice, availability and to discuss how the Walter Tools TCMT110208‑MP4 WPP10G insert can improve steel machining processes Technical data Article number: TCMT110208‑MP4‑WPP10G‑WALTER ISO designation: TCMT110208‑MP4 WPP10G Series: Tiger‑tec Gold Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 11 Thickness code: 02 Tolerance class: M Special features Grade: WPP10G Chipbreaker: MP4 Shape: Triangle 60° Material application: Steel (P) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The Walter Tools TCMT110208‑MP4 WPP10G insert is designed specifically for machining steel (ISO group P), including unalloyed and alloyed steels typical in general turning and boring operations. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the TCMT110208‑MP4 insert improves wear resistance and heat management, resulting in longer tool life and more consistent machining performance under typical steel cutting conditions. Can the triangular form be used for external turning and boring? Yes, the triangle 60° geometry gives three indexed cutting corners and is suitable for both external turning and certain boring applications when paired with compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools is a brand of Walter Deutschland GmbH. Protected trademarks and trade names are the property of their respective owners; brand names are used solely for identification and explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
TCMT110208-MP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the MP4 chipbreaker and the triangular geometry for stable chip formation and reliable tool life; order directly via Metav Werkzeuge or consult our advisors for application support. TCMT110208-MP4 WPP20G — Triangular insert (60°), 0.8 mm corner radius, Walter Tools The TCMT110208-MP4 WPP20G is a triangular indexable insert for turning and drilling applications on steels, combining Tiger·tec Gold coated carbide with an optimised MP4 chipbreaker for consistent performance in general turning operations. Tiger·tec Gold coated carbide for enhanced edge stability Optimised MP4 chipbreaker for controlled chip formation Triangle 60° geometry with 0.8 mm corner radius Faster throughput with consistent surface quality The combination of Tiger·tec Gold coating and a coated carbide substrate is engineered to improve edge durability when machining steels. This results in fewer tool changes and more stable cutting conditions, which supports higher productive uptime and consistent component finish. The coating technology is tuned to the thermal and chip‑forming behaviour typical of steel machining, helping maintain a reliable cutting edge under varying loads and extending effective tool life. Predictable chip control and robust cutting edge The MP4 chipbreaker is designed to produce short, manageable chips in a broad range of steel grades, reducing the risk of entanglement and improving process stability. The triangle insert supplies three usable cutting edges per index, while the 0.8 mm corner radius increases edge strength for interrupted cuts and supports acceptable surface integrity in standard finishing passes. The insert’s 7° clearance angle contributes to controlled cutting forces and lowers rubbing, which together preserve the cutting edge and improve repeatability. Clear application range and practical guidance This insert is intended primarily for ISO group P (steel). The grade WPP20G is part of the Tiger·tec Gold family and balances wear resistance and toughness across common steel subgroups (grade 10: more wear‑resistant; grade 20: universal; grade 30/35: tougher applications). For selection guidance on edge preparation, cutting data and toolholder compatibility, Metav Werkzeuge provides technical advice and data sheets to ensure the insert matches the intended operation and machine setup. If further machining parameters are required, the technical team can assist with recommendations for feeds, speeds and depths of cut. For tailored recommendations or to secure these Tiger·tec Gold inserts from Metav Werkzeuge, contact our sales engineers at Metav Werkzeuge for fast technical advice and availability Technical data Article number (SKU): TCMT110208-MP4-WPP20G-WALTER Item designation: TCMT110208-MP4 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Triangle 60° Size: 11 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: MP4 Coating technology: Tiger·tec Gold (coated carbide) Material application: P (steel) Execution: T ISO designation: TCMT110208-MP4 WPP20G FAQ Which materials is this insert suited for? The TCMT110208-MP4 WPP20G is designed for ISO group P, meaning it is intended for machining steel varieties including unalloyed and alloyed steels. How does the MP4 chipbreaker improve machining? The MP4 chipbreaker provides controlled chip segmentation during turning operations, which aids chip evacuation and reduces the chance of long, tangled chips in standard steel machining with this Walter Tools insert. What effect does the 0.8 mm corner radius have? A 0.8 mm corner radius increases the cutting edge’s strength, improving resistance to chipping and supporting better surface integrity during finishing and moderately interrupted cuts when using the TCMT110208-MP4 WPP20G. How many cutting edges are available per insert? The triangular geometry offers three indexable cutting edges, allowing economical re‑indexing and predictable performance across multiple edges. Is the Tiger·tec Gold coating suitable for demanding steel operations? The Tiger·tec Gold coating on this insert is developed to cope with the heat and chip formation characteristics of steel, offering improved edge stability and consistent tool life in routine turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCMT110208-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and an RK4 chipbreaker for dependable chip control and consistent cutting performance in cast iron machining; order the TCMT110208-RK4 WKK10S directly via Metav Werkzeuge or request technical advice from our specialists. TCMT110208-RK4 WKK10S indexable insert — triangle 60°, Tiger·tec Silver, Walter Tools TCMT110208-RK4 WKK10S is a coated carbide triangle insert designed for turning and boring operations in cast iron applications, offering robust edge life and stable chip evacuation. TCMT110208-RK4 WKK10S – Tiger·tec Silver technology Triangle 60° form with 0.8 mm corner radius RK4 chipbreaker optimised for cast iron chips 7° relief angle for stable cutting engagement Consistent chip control for abrasive cast iron work The combination of the RK4 chipbreaker and the WKK10S grade addresses the characteristic short, brittle chips of cast iron by promoting predictable chip segmentation and evacuation. This yields a more stable cutting process, which in turn reduces the risk of built-up edge and unexpected interruptions. The insert’s design supports both interrupted and continuous cuts typical in finishing and light roughing, enabling a consistent process window even under varying workpiece geometries. Coating and grade that extend cutting intervals The Tiger·tec Silver coating technology provides a wear-resistant surface suited to the abrasive nature of grey and nodular cast irons. The WKK10S grade combines a coated carbide substrate with a coating structure that balances toughness and wear resistance, so edge life is extended without compromising dimensional repeatability. For operations where abrasive wear is the limiting factor, this combination offers measurable gains in productivity through fewer indexings and replacements. Geometry engineered for strength and surface quality A triangle 60° shape with a 0.8 mm corner radius delivers a favourable compromise between edge strength and surface finish: the larger radius increases resistance to mechanical and thermal shock, while the insert form allows multiple cutting edges per index. The 7° relief angle ensures secure seating and helps to control cutting forces, which supports steady tool engagement and consistent surface results on cast iron workpieces. Practical selection and application advice When choosing the insert for a specific turning or boring task, consider the interplay of feed, depth of cut and insert radius: the 0.8 mm corner radius is suited to medium finishing passes and light roughing where a balance of edge robustness and finish is required. The TCMT110208-RK4 WKK10S insert is particularly effective in operations with frequent interruptions or interrupted cuts because the grade tolerates the abrasive wear typical of cast iron. For tailored machining parameters, consult application tables or seek guidance from Metav Werkzeuge’s technical team. For tailored recommendations on Walter Tools inserts such as the TCMT110208-RK4 WKK10S and to discuss optimised machining parameters for cast iron, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT110208-RK4-WKK10S-WALTER Name: TCMT110208-RK4 WKK10S Manufacturer: Walter Tools Product type: Indexable insert for boring and turning Facts Corner radius: 0.8 mm Relief angle: 7° Insert size: 11 (designation) Thickness code: 02 Tolerance class: M Special features Grade: WKK10S (coated carbide) Coating technology: Tiger·tec Silver Chipbreaker: RK4 Insert shape: triangle 60° Suitable for: cast iron FAQ What materials is this insert designed for? The TCMT110208-RK4 WKK10S is formulated for machining cast iron, with the WKK10S grade and Tiger·tec Silver coating optimised for abrasive wear typical of these materials. How does the RK4 chipbreaker affect performance? The RK4 chipbreaker controls and breaks brittle cast iron chips into manageable segments, improving evacuation and reducing the chance of chip entanglement during turning and boring. What is the benefit of the 0.8 mm corner radius? A 0.8 mm radius increases edge strength for stable engagement and improves resistance to mechanical shock while still allowing good surface finish on finishing passes. Is this insert suitable for interrupted cuts? Yes, the combination of the coated grade and the insert geometry makes the TCMT110208-RK4 WKK10S well suited to interrupted and mixed cutting conditions often encountered in cast iron machining. Where can one obtain machining parameter guidance for this insert? Application advice and recommended cutting data for the TCMT110208-RK4 WKK10S can be requested from Metav Werkzeuge or found in Walter Tools’ technical documentation for Tiger·tec Silver grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation only; there is no connection between Metav Werkzeuge and the trademark holders. The offered article is an original, factory-new product from the manufacturer Walter Tools.
TCMT110208-RK4 WKK20S RK4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and the RK4 chipbreaker for reliable cast-iron turning; the 60° triangle form with a 0.8 mm corner radius delivers stable edge life and consistent surface finish. Order the insert via Metav Werkzeuge or contact the technical team for application advice. TCMT110208-RK4 WKK20S — Indexable turning and boring insert, Tiger·tec Silver, for cast iron (Walter Tools) TCMT110208-RK4 WKK20S is an indexable turning/boring insert developed for productive machining of cast iron components, combining a coated carbide grade with an RK4 chipbreaker for controlled chip formation. Tiger·tec Silver coating for prolonged life Optimised RK4 chip control for cast iron 60° triangle for three positive cutting edges 0.8 mm corner radius for stable finishes Improved process security and predictable tool life The combination of the Tiger·tec Silver coating and the WKK20S grade gives a balance of wear resistance and toughness tailored to abrasive cast-iron materials. The coated carbide substrate resists abrasive flank wear while retaining edge stability during interrupted cuts. The RK4 chipbreaker is designed to produce short, controlled chips in nodular and grey cast iron, reducing the risk of entanglement and easing chip evacuation. Together these characteristics support a more consistent production process and fewer unplanned tool changes, which benefits cycle-time reliability and overall productivity. Consistent edge geometry for accurate finishing A 60° triangle plate form offers three usable cutting corners per insert and a positive cutting geometry useful for general turning and light finishing passes. The 0.8 mm corner radius provides a compromise between edge strength and the ability to achieve fine surface finishes, while the 7° clearance reduces rubbing at the flank, lowering heat generation and improving dimensional stability. These geometric choices help to maintain repeatable part quality across series production and reduce the need for frequent rework. Practical integration for workshop workflows The insert is supplied in the TCMT110208-RK4 configuration and fits standard toolholders designed for triangular inserts, allowing straightforward integration into existing toolsets. The WKK20S grade is optimised specifically for ISO K (cast iron) applications, enabling reliable results without extensive process tuning. The tolerance class M ensures consistent seating and indexed accuracy during insert changes, supporting quick replacements and minimising downtime. For operations that prioritise steady productivity and predictable tool life, this insert offers a robust option from Walter Tools. For discussion of specific cast-iron applications or to confirm compatibility with a holder system, contact Metav Werkzeuge to arrange technical advice or check availability. Technical data SKU: TCMT110208-RK4-WKK20S-WALTER Article designation: TCMT110208-RK4 WKK20S Product type: Indexable turning/boring insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Facts Corner radius: 0.8 mm Free angle / clearance: 7° Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Special features RK4 chipbreaker Coated carbide (Tiger·tec Silver technology) Optimised for cast iron (ISO K) Positive geometry for finishing and general turning Designed for standard triangular toolholders FAQ What materials is this insert intended for? The TCMT110208-RK4 WKK20S insert is formulated for machining cast iron (ISO K), with the WKK20S grade tuned to handle abrasive wear typical of those alloys. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker on this insert promotes short, controllable chips when turning cast iron, improving chip evacuation and reducing the risk of chip-related interruptions during production. Can this insert be used for finishing passes? Yes, the 0.8 mm corner radius and positive geometry enable fine finishing while maintaining edge strength; this makes the insert suitable for both semi-finishing and light finishing cuts. Is the insert compatible with common triangular toolholders? The TCMT110208-RK4 form is a standard triangular insert format and is compatible with holders designed for 60° triangle indexable plates, facilitating straightforward replacement and integration. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are used for explanation only and do not imply any affiliation with or endorsement by the trademark holders. The offered item is original, factory-new goods from the manufacturer.
TCMT110208-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Gold grade with a compact triangular geometry and a robust RM4 chipbreaker, the insert provides stable, repeatable performance for stainless steel turning. Order the TCMT110208-RM4 WMP20G directly via Metav Werkzeuge or consult our technical team for parameter recommendations. TCMT110208-RM4 WMP20G – Turning indexable insert, 7° clearance, 0.8 mm corner radius (Walter Tools) TCMT110208-RM4 WMP20G is a coated carbide turning insert designed for reliable machining of stainless steel in medium to robust conditions Turning insert TCMT110208-RM4 WMP20G by Walter Tools Tiger-tec Gold coating for longer tool life 7° clearance, 0.8 mm corner radius for robust cuts Optimised for stainless steel (ISO group M) Improved process stability for stainless steel components The combination of the WMP20G grade and the Tiger·tec Gold coating yields a coated carbide solution tailored to the demands of machining stainless steel. The grade supports secure chip formation and high edge stability under the higher temperatures and built-up edge tendencies typical of M-group materials. As a consequence, cycle-time consistency and component quality are enhanced, while the need for frequent insert changes is reduced. Consistent chip control and edge protection for challenging feeds With the RM4 chipbreaker and the Tiger·tec Gold surface treatment, the geometry directs chips away from the cutting zone and reduces edge wear during interrupted cuts. The chipbreaker is optimised for stainless materials that are prone to long, stringy chips; this results in safer swarf behaviour and fewer secondary operations to clear chips. The coated substrate supports a stable cutting edge, improving surface finish and preserving dimensional accuracy during extended runs. Versatile geometry that balances productivity and edge life The triangular 60° form provides three usable cutting edges per insert, enabling efficient indexability and cost-effective usage. The 7° clearance angle and 0.8 mm corner radius are selected to withstand moderate depths of cut while limiting edge chipping, making the geometry suited to medium to robust machining strategies. This balance of shape and relief supports reproducible results on bars, shafts and general turned parts in stainless alloys according to ISO group M. For machining stainless steel with a process-stable grade from Walter Tools, contact Metav Werkzeuge for tailored cutting data and direct supply: info@metav-werkzeuge.com | +49 2822 7131930. Technical Data Article number: TCMT110208-RM4-WMP20G-WALTER Product designation: TCMT110208-RM4 WMP20G Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.8 mm Plate size: 11 Plate thickness: 02 Tolerance class: M Special features Grade: WMP20G (Tiger·tec Gold) Coating: coated carbide Geometry: Triangular 60° Chipbreaker: RM4 Suitable for: stainless steel (ISO group M) Execution: T Series: Tiger-tec Gold FAQ What materials is this insert intended for? The TCMT110208-RM4 WMP20G is intended primarily for stainless steel machining (ISO group M) and is engineered to handle the toughness and heat sensitivity of these alloys. How does the Tiger·tec Gold grade improve performance? The Tiger·tec Gold grade provides enhanced wear resistance and edge stability on the coated carbide substrate, extending insert life and maintaining consistent surface finish during production. What benefits does the RM4 chipbreaker offer in practice? The RM4 chipbreaker promotes controlled chip formation and evacuation when turning stainless steel, reducing the risk of long, entangling chips and improving operational safety. Is the triangular shape advantageous for production runs? Yes; the triangular 60° geometry offers three indexable cutting edges per insert, which increases cost-efficiency and reduces tool-change frequency in batch and continuous turning operations. Can this insert be used for light finishing passes? The combination of the 0.8 mm corner radius and the 7° clearance makes the insert suitable for medium to robust operations; finishing passes are possible but should be selected according to component tolerance and surface finish requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
TCMT110208-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Benefit from the combination of proven wear resistance in the WMP20S grade and precise chip control from the RM4 breaker for consistent rostfreier Stahl machining. Order the TCMT110208‑RM4 WMP20S directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208-RM4 WMP20S – Triangle 60° indexable insert for rostfreier Stahl, Tiger‑tec Silver by Walter Tools The TCMT110208‑RM4 WMP20S is a coated cemented‑carbide indexable insert engineered for demanding boring and turning operations in rostfreier Stahl; it combines Tiger‑tec Silver coating technology with a geometry tuned for secure chip formation. Tiger‑tec Silver coating, WMP20S grade Designed for rostfreier Stahl (M) machining Triangle 60° form with 0.8 mm corner radius 7° clearance angle and RM4 chipbreaker Higher productivity through optimised grade and coating The insert’s WMP20S grade, part of the Tiger‑tec Silver series, is developed to extend tool life under the thermal and adhesive challenges of rostfreier Stahl. With a coated cemented carbide substrate and a modern PVD-style coating stack, the insert reduces flank wear and resists built-up edge formation. This results in fewer interruptions for tool changes and more predictable cycle times, so production runs remain steady and output quality becomes more consistent. Reliable chip control and surface quality A precisely shaped RM4 chipbreaker and the Triangle 60° form deliver repeatable chip segmentation and evacuation even under the sticky cutting conditions typical of rostfreier Stahl. The 0.8 mm corner radius balances edge strength and fine surface finish, enabling a smooth machined face with reduced post-process grinding. Better chip control lowers the risk of surface defects and protects workpiece geometry, which is particularly important for precision components and serial production. Geometry and angles tuned for versatile applications The insert’s 7° clearance angle and its compact insert size ensure stable cutting engagement in both boring and turning set-ups. The combination of clearance and corner geometry reduces rubbing and heat build-up at the cutting edge, allowing for conservative to moderately aggressive cutting parameters without sacrificing component integrity. As a result, the same insert suits a range of operations from finishing to medium-duty machining in rostfreier Stahl. Cost-effectiveness through fewer interruptions and consistent results Choosing a Tiger‑tec Silver‑based insert with the WMP20S grade means fewer unscheduled tool exchanges and less scrap due to inconsistent cutting. The robust edge life reduces total tool consumption over time, while the predictable performance supports process planning and cost calculations. For workshops and production lines seeking to raise throughput without sacrificing surface requirements, this insert offers a pragmatic balance of durability and performance. Contact Metav Werkzeuge to discuss application recommendations and to source Walter Tools Tiger‑tec Silver TCMT110208‑RM4 WMP20S inserts for rostfreier Stahl machining Technical data SKU: TCMT110208‑RM4‑WMP20S‑WALTER Article designation: TCMT110208‑RM4 WMP20S Type: Boring and turning indexable insert Manufacturer: Walter Tools Facts Form angle: Triangle 60° Corner radius: 0.8 mm Clearance angle: 7° Insert size: 11 mm Thickness: 2.0 mm Special features Grade: WMP20S (Tiger‑tec Silver) Coating technology: Tiger‑tec Silver (coated cemented carbide) Chipbreaker: RM4 Optimised for: rostfreier Stahl (ISO group M) Series: Tiger‑tec Silver FAQ What materials is this insert intended for? The TCMT110208‑RM4 WMP20S is optimised for rostfreier Stahl (ISO group M) and designed to maintain edge security and chip control in those materials. How does the RM4 chipbreaker affect performance? The RM4 chipbreaker on this Walter Tools insert promotes reliable chip segmentation and evacuation, which reduces built‑up edge and improves surface finish when machining rostfreier Stahl. What benefits does the Tiger‑tec Silver coating bring? Tiger‑tec Silver provides enhanced wear resistance and thermal stability for longer tool life and consistent cutting performance under the demanding conditions of rostfreier Stahl machining. Is the 0.8 mm corner radius suitable for finishing? Yes, the 0.8 mm corner radius offers a compromise between edge strength and surface quality, making the insert suitable for finishing and medium‑duty operations. Can the insert be used for roughing operations? The geometry and coating support a range of cutting conditions; for heavy roughing, tool selection and parameters should be adjusted accordingly to match the required metal removal rates. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the manufacturers. The offered article is an original, factory‑new product of the named manufacturer.
TCMT110208-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver thermal resistance and an RM4 chipbreaker for consistent chip control when machining stainless steels and heat‑resistant alloys; this pairing improves process reliability and tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for optimisation advice. TCMT110208-RM4 WSM20S indexable turning insert — Walter Tools, Tiger‑tec Silver coating for stainless steels and superalloys A TCMT110208-RM4 WSM20S indexable turning insert engineered for stable cutting performance when machining rostfreier Stahl and high‑temperature alloys, suitable for demanding turning and boring operations Tiger‑tec Silver coating for high thermal resistance Optimised RM4 chipbreaker for secure chip control Triangle 60° form with 0.8 mm corner radius Reliable machining of challenging alloy groups The insert’s core advantage lies in the combination of a Tiger‑tec Silver coated substrate and the WSM20S grade, formulated for high thermal stability when cutting rostfreier Stahl and superalloys. The coating reduces adhesive wear and supports consistent edge integrity under elevated temperatures, which in turn minimises unexpected downtime. For production environments where material weld‑on and edge build‑up are frequent, this specification delivers measurable improvements in process repeatability and component finish. Controlled chip formation for safer operations Equipped with the RM4 chipbreaker, the triangular insert produces short, controllable chips that clear reliably from the cutting zone. Stable chip control reduces the risk of entanglement and improves surface quality in serial turning operations. The insert’s geometry — a triangle 60° form with a 0.8 mm corner radius — balances strength at the cutting edge with the ability to achieve fine surface finishes; the small corner radius supports accurate part tolerances without sacrificing edge stability. Designed for longevity and predictable tool life The substrate and coating pairing of this grade emphasise resistance to thermal and mechanical wear mechanisms common in machining heat‑resistant superalloys and titanium alloys. The insert’s 7° relief angle promotes effective cutting engagement while limiting flank contact and rubbing, thereby extending achievable tool life. In practice, this translates into fewer insert changes per shift and improved uptime for turning cells where consistent performance is essential. Practical integration and machining guidance The insert is delivered in the standard TCMT110208‑RM4 geometry and thickness, enabling straightforward integration into existing toolholders designed for triangular indexable inserts. For best results, pair the insert with stable clamping and a toolholder that supports positive chip evacuation. When processing rostfreier Stahl, favour moderate cutting speeds and ensure adequate coolant or lubricant strategy as the grade prioritises thermal resilience over extreme speed machining. The specification supports machining strategies that prioritise reproducibility and surface integrity. Contact Metav Werkzeuge for individual application advice on Walter Tools Tiger‑tec Silver inserts and let the Metav team recommend cutting data optimised for specific rostfreier Stahl or superalloy grades Technical data Article number: TCMT110208-RM4-WSM20S-WALTER Article designation: TCMT110208-RM4 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Form: Triangle 60° Size: 11 Thickness: 02 Corner radius: 0.8 mm Relief angle: 7° Chipbreaker: RM4 Tolerance class: M Material suitability: S / M Facts SKU: TCMT110208-RM4-WSM20S-WALTER Product type: Indexable turning / boring insert Coating: Tiger‑tec Silver (coated carbide) Material designation: S / M Inclusion in data: rostfreier Stahl suitable Special features Optimised for rostfreier Stahl and heat‑resistant superalloys Designed for secure chip control with RM4 geometry Small corner radius for fine surface finish capability Compatible with standard TCMT toolholders High thermal resistance for demanding turning applications FAQ What materials is this insert suited for? The TCMT110208‑RM4 WSM20S insert is suitable for rostfreier Stahl (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), reflecting the WSM20S grade focus on thermal and edge stability. Can the insert be used for finishing passes? Yes, the 0.8 mm corner radius and the triangular form allow for controlled finishing operations where good surface quality and repeatability are required. What is the function of the RM4 chipbreaker? The RM4 chipbreaker is engineered to produce short, manageable chips that aid evacuation and reduce the risk of chip entanglement in turning operations. Is this insert compatible with standard TCMT toolholders? The insert follows the TCMT110208 geometry and thickness specifications and is compatible with corresponding toolholders designed for triangular indexable inserts. Does the Tiger‑tec Silver coating support high cutting speeds? The Tiger‑tec Silver coating improves thermal resistance and edge life; while it enables robust performance at elevated temperatures, optimal cutting speeds depend on the specific workpiece alloy and machining setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com