TNMA160404-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the wear-resistant WKK10S grade for consistent cast iron performance and reproducible productivity; the triangular 60° form with a 0.4 mm corner radius and RK5 chipbreaker ensures reliable chip control and low downtime. Order directly via Metav Werkzeuge or contact the consultants for process optimisation. TNMA160404-RK5 WKK10S — Turning insert, Tiger·tec Silver, for cast iron (Walter Tools) TNMA160404-RK5 WKK10S is a triangle 60° turning insert designed for medium to high-abrasion cast iron machining with a Tiger·tec Silver coating for enhanced life Tiger·tec Silver coating for longer tool life Optimised for cast iron machining Triangle 60° form for versatile operations RK5 chipbreaker for controlled chip formation Longer productive life through advanced coating technology The combination of the Tiger·tec Silver coating and the WKK10S carbide grade delivers a measurable improvement in wear resistance for abrasive cast iron applications. This coated carbide composition reduces flank and crater wear under cyclic loads, which directly contributes to longer tool life and fewer insert changes. As a result, process stability improves and machine uptime increases, providing a clear efficiency advantage for series turning operations. Reliable chip control and surface integrity for cast components Engineered for the particular chip behaviour of grey and nodular cast irons, the RK5 chipbreaker and negative rake geometry provide consistent breaking of short, brittle chips. The RK5 geometry reduces the risk of built-up edge and promotes heat dissipation at the cutting zone, which supports a more consistent surface finish on finished components. These characteristics make the insert suitable for both roughing and finishing passes where predictable chip flow and part quality are required. Geometry and handling designed to simplify set-up and repeatability The triangular 60° form with a 0.4 mm corner radius and a 0° negative relief angle offers a stable clamping seat and multiple indexing positions, reducing tooling costs per part. The insert’s designation and form are matched to standard holders for quick replacements and consistent positioning, which shortens set-up times and helps maintain dimensional repeatability across batches. The robust nose geometry also increases resistance to mechanical shock in interrupted cuts. Contact Metav Werkzeuge for tailored advice on Walter Tools' Tiger·tec Silver TNMA160404-RK5 WKK10S inserts and for recommendations on cutting parameters; consultants are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: TNMA160404-RK5-WKK10S-WALTER Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Facts Plate size: 16 mm Plate thickness: 4 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Shape: Triangle 60° Special features Chipbreaker: RK5 Substrate/coating: coated carbide (Tiger·tec Silver) Application group: cast iron (ISO group K) Execution: A Tolerance class: M ISO designation: TNMA160404-RK5 WKK10S FAQ What materials is this insert intended for? This insert is specified for machining cast iron (ISO group K) and the WKK10S grade is tuned for abrasive wear and short, breaking chips typical of cast materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the TNMA160404-RK5 enhances wear resistance and reduces thermal load, which extends insert life and supports more consistent batch output. What chip control can be expected with the RK5 chipbreaker? The RK5 chipbreaker promotes reliable breaking of short chips and reduces the likelihood of built-up edge when turning cast iron, improving surface quality and tool stability. Is the triangular 60° form suitable for multiple operations? Yes, the triangle 60° geometry provides several indexing positions and a robust nose for both roughing and finishing in cast iron turning applications. What are the key dimensional specifications to check when ordering replacements? Check the ISO designation TNMA160404-RK5 WKK10S, the plate size (16 mm), plate thickness (4 mm) and the corner radius (0.4 mm) to ensure compatibility with the intended toolholder and application. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
TNMA160404-RK5 WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and WKK20S grade for reliable wear resistance in abrasive cast iron machining, combined with the RK5 chipbreaker and 60° triangular geometry for stable chip control and consistent component quality — order the insert directly via Metav Werkzeuge or consult the technical team for process data. TNMA160404-RK5 WKK20S – turning indexable insert, Tiger‑tec Silver, Walter Tools A TNMA160404-RK5 WKK20S turning indexable insert engineered for machining cast iron, featuring the Tiger‑tec Silver coating and an RK5 chipbreaker for controlled, short chips Tiger‑tec Silver coating for high wear resistance Optimised RK5 chipbreaker for short, broken chips 60° triangular insert for versatile turning Specifically developed for cast iron (ISO group K) Consistent performance in abrasive cast iron machining The combination of the Tiger‑tec Silver coating and the WKK20S grade is aimed specifically at the challenges of cast iron workpieces. Abrasive constituents and frequently short, brittle chips in these materials accelerate flank wear; the coated grade reduces abrasive wear and helps maintain a stable cutting edge for longer tool life. In practice, this means fewer insert changes, steadier process parameters and improved productivity during continuous turning operations. Robust geometry that secures dimensional accuracy The 60° triangular shape together with a 0.4 mm corner radius and a 0° (negative) clearance produces a mechanically stable cutting edge suited to interrupted cuts and high forces. The RK5 chipbreaker is tailored for short, broken chip formation, reducing risk of entanglement and improving chip evacuation. These geometric features support repeatable part diameters and a reliable surface finish while keeping machining forces predictable — an advantage when batch consistency is critical. Practical application benefits and selection guidance Series and grade choices matter: the Tiger‑tec Silver line offers a broad, application‑oriented performance range for cast iron (ISO group K). The insert’s designation and dimensions suit standard toolholders that accept TNMA formats; thickness and form enable stable clamping and effective heat distribution. For typical use, the insert excels in roughing and medium finishing of grey and nodular cast irons, where stable chip control and wear resistance deliver economic machining through longer indexable life and fewer tool changes. Contact Metav Werkzeuge today for tailored cutting parameters, application advice and to secure genuine Walter Tools Tiger‑tec Silver inserts for cast iron machining Technical data SKU: TNMA160404-RK5-WKK20S-WALTER Designation: TNMA160404-RK5 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Dimensions & tolerances Insert size: 16 mm Plate thickness: 04 Corner radius: 0.4 mm Insert shape: Triangle 60° Clearance angle: 0° (negative) Tolerance class: M Features & material application Chipbreaker: RK5 Grade: WKK20S Execution: A Plate designation without grade: TNMA160404-RK5 ISO designation: TNMA160404-RK5 WKK20S Suitable for: cast iron (ISO group K) FAQ Which materials is this insert intended for? The TNMA160404-RK5 WKK20S from Walter Tools is optimised for cast iron (ISO group K); the WKK20S grade and Tiger‑tec Silver coating address abrasive wear and chip characteristics typical of these materials. For which machining operations is the insert recommended? This turning indexable insert is suited to roughing and medium finishing of cast iron components; the RK5 chipbreaker and robust 60° geometry enable stable chip control and reliable edge life during heavy cuts and intermittent machining. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; this radius increases edge strength and helps produce a consistent surface finish, balancing cutting forces against the need for a defined cutting edge in cast iron turning. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating reduces abrasive wear and improves thermal stability at the cutting edge, extending insert life and maintaining dimensional consistency over longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMA160408-RK5 WKK10S Wendeplatten - Walter Tools
Take advantage of a robust turning insert that combines Tiger‑tec Silver coating, a tailored RK5 chipbreaker and geometry optimised for cast iron to improve process reliability and tool life; order directly via Metav Werkzeuge or consult our team for application support. TNMA160408-RK5 WKK10S — Dreieck 60° turning insert by Walter Tools (Tiger‑tec Silver, for cast iron) A TNMA160408-RK5 WKK10S turning insert designed for reliable machining of cast iron, offering a coated‑carbide grade and a chipbreaker tuned to brittle, abrasive workpieces Tiger·tec Silver coating for extended tool life Optimised RK5 chipbreaker for cast iron chips Triangle 60° form for versatile turning geometry Sustainably higher process stability when machining cast iron The combination of the WKK10S grade and the Tiger·tec Silver coating delivers a balanced response to the abrasive wear typical of cast iron. The coated‑carbide chemistry is developed to resist flank and crater wear while maintaining a consistent cutting edge, which reduces unplanned regrinds and tool changes. As a result, the insert supports a more predictable production flow and contributes to reduced downtime. The chip control capability of the RK5 chipbreaker is especially relevant for the short, breaking chips produced from cast iron, improving evacuation and reducing the risk of built‑up edge. Geometry and robustness that increase productivity and repeatability The insert’s triangle 60° form and 0° (negative) relief angle provide a compact geometry that supports stable cutting forces and repeatable positioning in the toolholder. The specified corner radius of 0.8 mm helps balance edge strength and surface finish, permitting consistent component tolerances over longer tool life. The overall design and the A execution ensure compatibility with standard turning toolholders and allow straightforward indexing, which benefits series production by keeping set‑up times low and preserving part quality. Practical handling, manufacturer quality and application guidance Produced under the Walter Tools portfolio, this insert benefits from material and process knowledge aimed at industrial turning applications. The grade’s focus on cast iron machining ensures stable chip formation and reliable wear behaviour under typical conditions for that material group. For customers seeking application optimisation—or unsure whether this insert suits a specific casting grade—Metav Werkzeuge offers technical advice and machining recommendations to align cutting data and tool selection with the production task, supporting both efficiency and reproducible results. For specialised advice on using Walter Tools Tiger‑tec Silver inserts or to specify the TNMA160408‑RK5 WKK10S for a particular cast iron application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultancy and stocking options Technical data SKU: TNMA160408-RK5-WKK10S-WALTER Designation: TNMA160408-RK5 WKK10S Numbers / Core technical data Insert size: 16 Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Triangle 60° Tolerance class: M Designs / Special features Grade: WKK10S Series: Tiger‑tec Silver Chipbreaker: RK5 Execution: A Material code: K (cast iron application) Application focus: machining of cast iron Coating / substrate: coated carbide (Tiger·tec Silver technology) FAQ What materials is this insert intended for? The TNMA160408‑RK5 WKK10S insert is designed primarily for the machining of cast iron, with the WKK10S grade and the Tiger‑tec Silver coating matched to abrasive, short‑chip casting materials. What is the effect of the RK5 chipbreaker? The RK5 chipbreaker is engineered to promote controlled, short chips when turning cast iron, supporting safe chip evacuation and reducing the likelihood of chip entanglement in the machining area. How does the triangle 60° shape benefit turning operations? The triangle 60° geometry offers a compact cutting edge that facilitates predictable cutting forces and stable seating in the toolholder, helping to maintain repeatable dimensions in series production. Is the insert suitable for finishing as well as roughing? The insert’s 0.8 mm corner radius and robust coated‑carbide grade provide a balance between edge strength and surface quality; selection for finishing or roughing should follow the specific cutting parameters and surface tolerance requirements. Can Metav Werkzeuge provide cutting data for this insert? Yes. Metav Werkzeuge can advise on cutting speeds, feeds and depths of cut tailored to the TNMA160408‑RK5 WKK10S and the particular cast iron grade in use to achieve optimal tool life and part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
TNMA160408-RK5 WKK20S Wendeplatten - Walter Tools
Take advantage of a high-performance cutting solution that combines the Tiger·tec Silver coating and the WKK20S grade for reliable, wear-resistant machining of cast iron; the RK5 chipbreaker ensures controlled, repeatable chips and stable cutting forces for productive turning. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. TNMA160408-RK5 WKK20S indexable turning insert for cast iron by Walter Tools A TNMA160408-RK5 WKK20S indexable turning insert engineered for robust, efficient machining of cast iron, featuring a Tiger·tec Silver coated carbide grade and RK5 chip control for short, predictable chips Tiger·tec Silver coated carbide RK5 chipbreaker for cast iron Triangle 60° insert form 0.8 mm corner radius, size 16 Deliver consistent productivity with coated-carbide performance The coated carbide grade provides a combination of wear resistance and toughness that benefits high-volume turning of abrasive cast-iron materials. The WKK20S grade, part of the Tiger·tec Silver series, is optimised for the ISO K group and reduces flank and crater wear under typical interrupted and continuous cutting conditions. As a result, the machining process gains in productivity and repeatability: fewer insert changes are required and component tolerances remain stable across batches. For planning, the insert’s coating technology supports extended tool life without sacrificing cutting-edge stability. Controlled chip formation for safer, faster machining Chip control is a decisive factor when turning cast iron; the RK5 chipbreaker on this insert shapes short, segmented chips that evacuate reliably. Improved chip control reduces the likelihood of entanglement and ensures steady cutting forces, which in turn protects the toolholder and workpiece. For operators unfamiliar with chipbreaker nomenclature: RK5 denotes a geometry tailored to the brittle, often abrasive nature of cast irons, producing predictable chips and supporting higher feed rates while maintaining surface integrity and process security. Geometry designed for secure seating and dimensional accuracy The triangular 60° insert form combined with a 0.8 mm corner radius delivers a balance between strength and edge accessibility. The 60° shape allows for versatile toolholder clamping and multiple indexing positions, while the corner radius supports more robust edge strength during interrupted cuts. The insert size 16 and specified thickness ensure compatibility with standard clamping systems designed for TNMA-style inserts, offering straightforward replacement and reliable repeatability in serial production. Coating and grade explained for application matching The Tiger·tec Silver coating system provides a multi-layer surface that reduces abrasive wear and promotes thermal resistance at the cutting edge. The WKK20S grade is a coated cemented carbide developed for cast-iron applications, combining a harder surface with a substrate designed to withstand shock from interrupted cuts. For practical planning, this means the insert performs well across a range of cast-iron types commonly encountered in industry, lowering tooling costs per part through longer life and fewer unexpected tool interventions. For process-stable cast-iron turning with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for application advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMA160408-RK5-WKK20S-WALTER Designation: TNMA160408-RK5 WKK20S Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Silver Facts Insert shape: Triangle 60° Corner radius: 0.8 mm Insert size: 16 Plate thickness: 04 Free cutting angle: 0° (negative) Tolerance class: M Special features Grade: WKK20S (coated carbide) Chipbreaker: RK5 Material application: Cast iron (ISO K) Execution: A FAQ Is this insert suitable for all types of cast iron? The TNMA160408-RK5 WKK20S insert is formulated for the ISO K group and performs across a broad range of cast-iron grades, delivering reliable wear resistance and good chip control in most grey and nodular cast-iron turning operations. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances edge life and thermal stability for the WKK20S grade, reducing abrasive wear and enabling longer cutting intervals when turning abrasive cast-iron materials. How does the RK5 chipbreaker influence machining parameters? The RK5 geometry produces short, controlled chips that improve evacuation and allow for higher feed rates with consistent surface finish, while reducing the risk of chip-related interruptions during turning. Which clamping systems are compatible with this insert form? The triangular 60° form and standard TNMA-style dimensions are compatible with conventional indexable-insert toolholders designed for TNMA inserts, enabling secure seating and multiple indexing positions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMA160408-RK7 WKK10S Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the Tiger·tec Silver grade together with the proven RK7 chipbreaker and triangle geometry for reliable cast-iron turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TNMA160408-RK7 WKK10S — Indexable turning insert, Tiger·tec Silver, for cast iron (Walter Tools) The TNMA160408-RK7 WKK10S is an indexable turning insert engineered for efficient machining of cast iron, combining a Tiger·tec Silver coated grade with a robust RK7 chipbreaker for stable, breakable chips. Tiger·tec Silver coated grade WKK10S grade for cast iron Triangle 60° geometry for versatile clamping 0.8 mm nose radius, negative 0° rake Increase process reliability with a grade tuned for cast iron The WKK10S grade, realised in the Tiger·tec Silver coating family, is formulated specifically for cast iron applications. Its coating and substrate balance hardness and toughness to resist abrasive wear typical of grey and ductile irons, which means longer tool life and fewer unplanned insert changes. The RK7 chipbreaker promotes consistent, short chips that reduce heat concentration at the cutting edge and improve surface finish, supporting more predictable cycle times and lower per-part costs. Geometry and edge preparation that stabilise cutting forces A triangle 60° insert delivers three effective cutting corners per indexable blade, while the 0.8 mm nose radius provides a good compromise between robustness and the ability to achieve acceptable surface quality. The insert’s negative 0° rake yields a strong cutting edge for interrupted cuts and heavy depths of cut often encountered in cast-iron turning. Together, these geometry choices contribute to process stability and help reduce vibration under varying cutting conditions. Practical benefits for workshop productivity Adopting this coated indexable insert supports higher productivity through extended edge life and predictable wear patterns. The combination of a wear-resistant coating and a chipformer optimised for brittle, abrasive chips means fewer tool changes and less machine downtime. The insert’s form factor and size code 16 allow use in a wide range of standard toolholders, simplifying inventory while maintaining machining efficiency. Clear orientation for application and selection This insert is categorised for the ISO group K, indicating suitability for Gusseisen (cast iron). As a coated carbide grade intended to manage abrasive wear and frequent chip breakage, it is a sound choice when prioritising reliability in batch production or finish-turning operations on cast components. For customers seeking alternatives, the Tiger·tec Silver family offers other sorts and coatings to fine-tune performance across different cast-iron alloys and process requirements. Contact Metav Werkzeuge for tailored grade recommendations and fast supply of Walter Tools inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMA160408-RK7-WKK10S-WALTER Designation: TNMA160408-RK7 WKK10S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Insert size code: 16 Corner radius: 0.8 mm Geometry: Triangle 60° Rake angle: 0° (negative) Thickness code: 04 Chipbreaker: RK7 Tolerance class: M Special features Grade: WKK10S Coating technology: Tiger·tec Silver Suitable for: Cast iron (ISO group K) Engineered for abrasive wear and breakable chips Designed for stable chip formation and extended edge life FAQ Which materials is this insert designed for? The TNMA160408-RK7 WKK10S insert is designed primarily for cast iron (ISO group K) and is optimised for the abrasive wear and short, breaking chips typical of these materials. What advantages does the Tiger·tec Silver technology offer? Tiger·tec Silver in the WKK10S grade provides a balanced coated carbide structure that improves wear resistance and tool life for cast-iron turning while maintaining sufficient toughness for stable cutting. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker on this insert promotes short, controlled chips and reduces heat concentration at the cutting edge, which helps maintain surface quality and reduces the frequency of tool changes. Is the insert suitable for interrupted cuts or heavy roughing? With a negative 0° rake and a 0.8 mm nose radius, the insert offers a strong cutting edge suitable for interrupted cuts and robust roughing operations commonly required in cast-iron machining. Can this insert be used in standard toolholders? Yes; the triangle 60° geometry and size code 16 make the insert compatible with a wide range of common indexable turning toolholders designed for triangular inserts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is a leading manufacturer of precision tools for metalworking and forms part of the Sandvik Group. Brand names and trademarks are the property of their respective owners and are mentioned here for explanation only; there is no affiliation implied between our company and the listed brands.
TNMA160412-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the WKK10S grade for reliable, productive cast iron turning; the triangular 60° geometry with an RK5 chipbreaker and 1.2 mm corner radius offers controlled short chips and long tool life. Order the inserts via Metav Werkzeuge or consult our specialists for application advice. TNMA160412-RK5 WKK10S – Turning indexable insert, Tiger·tec Silver, for cast iron — Walter Tools TNMA160412-RK5 WKK10S is a precision turning insert designed for efficient machining of cast iron components, combining a coated carbide grade with a triangular 60° geometry for robust performance Tiger·tec Silver coated carbide WKK10S Optimised for abrasive cast iron machining Triangle 60° insert with 1.2 mm corner radius RK5 chipbreaker for controlled short chips Improved productivity through wear-resistant grade and coating The TNMA160412-RK5 WKK10S turning insert uses the Tiger·tec Silver technology and a coated carbide substrate to deliver stable wear behaviour and extended edge life when cutting abrasive cast iron. The WKK10S grade is tuned for ISO group K (cast iron), reducing flank and crater wear in interrupted or continuous cuts. For production environments this translates into fewer tool changes, more consistent surface quality and an improved cost-in-use ratio. The coated surface also contributes to thermal resistance, allowing higher cutting parameters where machine rigidity permits. Secure seating and predictable chip control for machining cycles The triangular 60° plate geometry with a 1.2 mm corner radius and the RK5 chipbreaker are engineered for reliable chip formation and short, breakable chips during roughing and semi-finishing in cast iron. The 0° clearance (negative) geometry provides a strong cutting edge that resists edge chipping under heavy cuts, while the RK5 groove pattern controls chip flow to avoid entanglement and improve evacuation. This combination ensures repeatable performance on lathes and turning centres, improving process stability and reducing secondary operations. Practical handling and application guidance for workshop use Selection and use are straightforward: the insert is suitable for roughing and medium feed operations in cast iron where abrasive wear and short chips are typical. The plate thickness code and tolerance class M support consistent clamping and repeatability; users benefit from predictable seating and interchangeability across compatible toolholders. For unfamiliar applications, machining data should start conservatively and be increased until the desired balance of productivity and tool life is achieved. If further machining data or compatibility checks are required, technical advice is available from Metav Werkzeuge; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. For high-performance cast iron turning with Walter Tools, contact Metav Werkzeuge for application support on the TNMA160412-RK5 WKK10S insert and to arrange supply or batch recommendations Technical Data Article number: TNMA160412-RK5-WKK10S-WALTER Designation: TNMA160412-RK5 WKK10S Product type: Turning indexable insert Manufacturer: Walter Tools Core data Size: 16 mm Thickness code: 04 Corner radius: 1.2 mm Clearance angle: 0° (negative) Tolerance class: M Special features Grade / series: Tiger·tec Silver — WKK10S (coated carbide) Chipbreaker: RK5 Plate shape: Triangle 60° Material application: Cast iron (ISO group K) Execution: A FAQ What materials is this insert intended for? The TNMA160412-RK5 WKK10S insert is intended primarily for cast iron (ISO group K); the WKK10S grade and Tiger·tec Silver coating are optimised for abrasive, short-chip cast materials. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker on this triangular insert produces controlled, short chips that improve evacuation and safety during roughing and semi-finishing in cast iron components. What does a 0° (negative) clearance mean for tool life? A 0° negative clearance gives a stronger cutting edge and better resistance to edge chipping under heavy loads, contributing to stable tool life in interrupted cuts and tough cast iron conditions. Is the insert suitable for finishing passes? The TNMA160412-RK5 WKK10S is optimised for roughing and medium finishing; for fine finishing on cast iron, consider the corner radius and surface requirements when selecting feeds and speeds. Which chipbreaker and geometry should be chosen for high-volume roughing? For high-volume roughing in cast iron, the RK5 chipbreaker with triangular 60° geometry and a 1.2 mm corner radius offers a robust balance between material removal and edge security. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TNMA160412-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Efficient, stable machining of cast iron is achieved by combining the WKK20S coated-carbide grade with the RK5 chipbreaker and the triangular 60° geometry; the result is improved tool life and reliable chip control. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMA160412-RK5 WKK20S indexable turning insert, Tiger·tec Silver coating — for cast iron, Walter Tools TNMA160412-RK5 WKK20S is an indexable turning insert designed for productive cast iron machining with optimised chip control Tiger·tec Silver coating for high wear resistance RK5 chipbreaker for stable chip control Triangle 60° geometry for positive seating Corner radius 1.2 mm for consistent edge life Boosted productivity through targeted wear resistance The combination of Tiger·tec Silver coating and the WKK20S grade provides a high level of wear resistance tailored to abrasive cast-iron applications. Coated carbide technology reduces flank and crater wear under interrupted cutting conditions, which translates directly into longer effective tool life and fewer indexings. For workshops aiming to reduce downtime, this means fewer insert changes and a steadier production rhythm while maintaining dimensional stability on the workpiece. Reliable chip formation and process stability The RK5 chipbreaker has been developed to produce short, controllable chips when turning grey and ductile cast irons, reducing the risk of entanglement and improving surface quality. The triangle 60° insert shape gives robust support in the toolholder and enables predictable cutting forces, while the corner radius 1.2 mm balances edge strength and surface finish. Together these characteristics ensure a stable machining process and consistent component tolerances in medium to heavy roughing operations. Practical fit and negative-rake capability for tough cuts With a negative 0° rake and execution A, the insert resists shock and maintains a strong cutting edge during interrupted cuts or heavy engagement. The insert thickness and seating geometry deliver the rigidity required for demanding turning tasks, reducing vibration and promoting repeatable results. This makes the insert particularly suitable for component processes where robustness and repeatability are essential to throughput. Application-focused advantages for cast-iron work Designed for the material group K (cast iron) according to ISO classifications, the coated carbide grade WKK20S is tuned to handle abrasive graphite and frequently brittle chip behaviour typical of cast components. The insert supports shops that need a universal yet resilient solution: it is versatile across different cast-iron types and helps maintain cycle times while protecting the cutter edge from premature wear. Discuss application requirements with Metav Werkzeuge for tailored recommendations on the Walter Tools TNMA160412-RK5 WKK20S indexable insert — request a material-tailored cutting strategy via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: TNMA160412-RK5-WKK20S-WALTER SKU: TNMA160412-RK5-WKK20S-WALTER Product type: indexable turning insert Grade: WKK20S Series: Tiger-tec Silver Manufacturer: Walter Tools Facts Plate size: 16 mm Corner radius: 1.2 mm Insert thickness: 04 Free angle: 0° (negative) Plate form: triangle 60° Tolerance class: M Special features Coating: Tiger·tec Silver Cutting material: coated carbide (WKK20S) Chipbreaker: RK5 Material group suitability: cast iron (K) Execution: A Application focus: stable chip control, high wear resistance FAQ Which materials is this insert best suited for? The insert is optimised for cast iron applications; the WKK20S grade and Tiger·tec Silver coating are tuned to the abrasive and breaking-chip behaviour of cast-iron materials. How does the RK5 chipbreaker affect chip control? The RK5 chipbreaker produces short, manageable chips in cast iron turning, improving process stability and reducing the need for additional chip handling measures when using the TNMA160412-RK5 WKK20S insert. Can this insert withstand interrupted cuts and heavy engagement? Yes — the negative 0° rake and robust triangular seating provide resistance to shock and maintain edge integrity during interrupted or heavy cutting operations. What production benefits can be expected from using this insert? Users can expect longer tool life, fewer indexings and more consistent surface quality on cast iron components, leading to improved uptime and predictable component tolerances. Manufacturer/Responsible: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the manufacturer.
TNMA160412-RK7 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of stable edge life, optimised chip control for cast iron and a robust 60° triangular geometry for productive turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. TNMA160412-RK7 WKK10S turning insert — WKK10S grade, Tiger·tec Silver coating, triangle 60° TNMA160412-RK7 WKK10S is a coated turning insert designed for reliable metalcutting in cast iron applications, offering a stable negative rake and optimised chip control. Tiger·tec Silver coating for cast iron RK7 chipbreaker for controlled chips 60° triangle provides three usable edges 1.2 mm corner radius for robustness Stable chip control tuned for cast iron productivity The insert’s RK7 chipbreaker and Tiger·tec Silver surface treatment deliver consistent chip formation when machining abrasive cast iron grades. The coating and substrate combine to reduce abrasive flank wear typical of cast components; the result is longer intervals between regrinds and fewer interruptions in the machining cycle. This improved process stability lowers the risk of unexpected tool changes and supports predictable cycle times on batch and series production, enhancing overall throughput. Robust geometry for repeatable edge life and process security A 60° triangular form with a 1.2 mm corner radius and a 0° (negative) rake angle offers mechanical strength at the cutting edge, providing high resistance to chipping under interrupted cuts or tough cast iron inclusions. The WKK10S grade is a coated carbide designed specifically for abrasive materials, balancing toughness and wear resistance to maintain dimensional control over longer runs. For production environments seeking consistent surface finish and tool life, this geometry helps to reduce the frequency of tool indexing and rework. Efficient use of insert features for practical machining benefits The insert format TNMA160412-RK7 places performance where it matters: triangular shape gives three cutting edges per index, the chipbreaker supports short, breakable chips common in cast iron, and the coating reduces build-up and flank wear. These technical attributes translate into concrete shop-floor benefits — fewer tool interventions, predictable surface quality and simplified tool management. For engineers and operators requiring dependable results on cast components, the insert offers a pragmatic balance of productivity and durability. For machining cast iron with a focus on productivity and repeatable results, contact Metav Werkzeuge for purchasing or application support — Metav Werkzeuge can advise on insert selection and compatible toolholders for the Walter Tools Tiger·tec Silver series. Technical data Article number: TNMA160412-RK7-WKK10S-WALTER SKU: TNMA160412-RK7-WKK10S-WALTER Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Series: Tiger-tec Silver Grade: WKK10S ISO designation: TNMA160412-RK7 WKK10S Numbers / Core technical data Insert size: 16 Thickness: 04 Corner radius: 1.2 mm Rake: 0° (negative) Tolerance class: M Designs / Special features Coated carbide grade (Tiger·tec Silver) Built for cast iron (K) RK7 chipbreaker for controlled chips Triangle 60° form Robust edge for interrupted cuts FAQ What materials is this insert intended for? The TNMA160412-RK7 WKK10S insert is designed primarily for cast iron machining; the WKK10S grade and Tiger·tec Silver coating are optimised for abrasive cast materials. How does the RK7 chipbreaker benefit production? The RK7 chipbreaker promotes short, breakable chips typical of cast iron turning, improving chip evacuation and reducing the risk of entanglement in automatic operations. What does the 0° negative rake mean for cutting performance? A 0° (negative) rake increases cutting-edge strength and resistance to chipping, which is beneficial for interrupted cuts and when machining cast iron with variable inclusions. How many edges are available per insert and how does that affect cost-efficiency? The triangular 60° geometry provides three usable edges per insert, offering a straightforward way to extend edge life and lower tooling consumption in serial turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mark names are used for explanation only. The offered article is original, brand-new goods from the manufacturer.
TNMA220408-RK5 WKK20S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the RK5 chipbreaker delivers controlled short chips and extended tool life for productive cast iron turning; the robust 0.8 mm corner radius and triangle geometry ensure process stability. Order the insert via Metav Werkzeuge or consult their specialists for cutting data and holder recommendations. TNMA220408-RK5 WKK20S indexable turning insert – Tiger·tec Silver for cast iron (Walter Tools) The TNMA220408-RK5 WKK20S is a triangular indexable turning insert engineered for efficient, reliable machining of cast iron components in production environments Triangle 60° geometry for stable cutting Tiger·tec Silver coated carbide for wear resistance Optimised for cast iron (ISO K) machining RK5 chipbreaker for controlled short chips Consistent wear resistance for high-volume cast iron work The WKK20S grade, part of the Tiger·tec Silver series, is a coated carbide cutting solution tuned for the abrasive wear and frequently short, breaking chips typical of cast iron. As a result, the insert provides improved tool life and fewer index changes, which reduces machine downtime and supports a more economical production flow. The coating technology supports higher cutting parameters where appropriate, enabling greater throughput without compromising component quality. Geometry and edge security that enhance process reliability The triangular 60° form and an 0.8 mm corner radius supply a robust cutting edge that resists chipping in interrupted cuts and heavy engagement. The 0° (negative) clearance angle increases edge strength, while the RK5 chipbreaker reliably produces short, controllable chips for safe evacuation. With an M tolerance class and execution A, the insert maintains repeatable seating in standard holders, contributing to stable runs and predictable component tolerances. Practical application and integration into production workflows Marked as a TNMA-style insert, this item fits toolholders designed for the TNMA format and suits turning operations where cast iron is the primary workpiece material. The grade’s balance between wear resistance and toughness makes it suitable for a range of cast iron types under ISO 513 group K. For workshops focused on consistent cycle times and surface quality, the insert offers a straightforward option to improve chip control and process reliability without complex setup changes. If further specification data or cutting parameters are needed, Metav Werkzeuge’s technical team can advise on optimal feeds, speeds and holder selection. Contact Metav Werkzeuge for tailored cutting data and to order Walter Tools TNMA220408-RK5 WKK20S inserts for cast iron production. Technical Data SKU: TNMA220408-RK5-WKK20S-WALTER Designation: TNMA220408-RK5 WKK20S Brand: Walter Tools Series: Tiger-tec Silver Core specifications Shape: Dreieck 60° Size: 22 Thickness: 04 Nose radius: 0,8 Clearance angle: 0° (negativ) Chipbreaker: RK5 Tolerance class: M Execution: A Special features Cutting material: beschichtetes Hartmetall (coated carbide) Sort: WKK20S (optimised for cast iron) Applicable material group: Cast iron (K, ISO 513) Design purpose: indexable turning insert (TNMA format) Sorteneinsatz: abrasion and short, breaking chips from cast materials FAQ What materials is this insert designed for? The TNMA220408-RK5 WKK20S insert is designed primarily for cast iron (ISO K) applications and is formulated to handle abrasive wear and short, breaking chips. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker promotes short, controllable chips, improving chip evacuation and reducing the risk of entanglement in turning operations with cast iron. What does the WKK20S grade offer compared with other grades? The WKK20S grade combines a coated carbide substrate with the Tiger·tec Silver technology to increase wear resistance while maintaining sufficient toughness for productive turning of cast iron. Which toolholders are compatible with this TNMA insert? Holders accepting TNMA-format triangular inserts accommodate this product; the geometry and M tolerance class support reliable seating and repeatable alignment in standard toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (marketed as Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is original and brand-new from the manufacturer.
TNMA220412-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK20S grade tailored for cast iron together with the RK5 chipbreaker and robust 60° triangular form for reliable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for process recommendations. TNMA220412-RK5 WKK20S Turning indexable insert — Tiger·tec Silver for cast iron (Walter Tools) The TNMA220412-RK5 WKK20S is a 60° triangular turning insert engineered for productive and repeatable machining of cast iron components in industrial turning applications. Tiger·tec Silver coating for extended life Grade WKK20S optimised for cast iron RK5 chipbreaker for controlled chip formation Triangle 60° form with 1.2 mm corner radius Long-lasting wear resistance for predictable production The combination of the Tiger·tec Silver coating and the WKK20S grade is designed to deliver enhanced wear resistance when machining abrasive cast iron. This coating technology reduces flank and crater wear, which leads to more consistent tool life and fewer unscheduled insert changes. For production environments where repeatability matters, the improved durability translates into lower tooling cost per part and more stable cycle times, supporting efficient planning and throughput. Secure chip control and stable cutting performance The RK5 chipbreaker has been developed to produce short, controlled chips when turning cast iron, reducing the risk of chip entanglement and improving process safety. Combined with the negative relief angle of 0° and the 60° triangular geometry, the insert offers strength at the cutting edge and reliable engagement under interrupted cuts. The 1.2 mm corner radius increases edge robustness, which helps to maintain surface quality while resisting edge chipping during heavy or variable cuts. Easy integration and consistent results on the shop floor The insert’s designation and form enable straightforward mounting in standard indexable turning toolholders and simple indexing for multiple edges, promoting quick tool replacement and minimal downtime. The tolerance class M and the clear ISO designation support consistent clamping and reproducible results across tool pockets. For workshops seeking a balance of productivity and tool life, this insert offers a practical solution for series turning of cast iron, with clear advantages in process reliability and part quality. Contact Metav Werkzeuge for cutting-data advice, availability and ordering of Walter Tools TNMA220412-RK5 WKK20S inserts. Technical Data Article number / SKU: TNMA220412-RK5-WKK20S-WALTER Designation: TNMA220412-RK5 WKK20S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Shape: Triangle 60° Corner radius: 1.2 mm Relief angle: 0° (negative) Size: 22 Thickness: 04 Tolerance class: M Special features Grade: WKK20S (coated carbide) Chipbreaker: RK5 Material group suitability: cast iron Execution: A Intended application: machining of cast iron FAQ What materials is this insert intended for? The TNMA220412-RK5 WKK20S is optimised for machining cast iron, reflecting the WKK20S grade’s focus on abrasive wear resistance and short, breaking chip behaviour. How does the RK5 chipbreaker influence machining? The RK5 chipbreaker on this Walter Tools turning insert promotes short, controllable chips and stable evacuation during cast iron turning, improving process safety and reducing interruptions. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and thermal stability, resulting in longer edge life and more consistent cutting performance when turning abrasive cast iron components. Is the 60° triangular form suitable for heavy cuts? A 60° triangle with a 1.2 mm corner radius offers a robust cutting edge and good strength for variable and interrupted cuts, supporting productive machining strategies on cast iron parts. Can the insert be used in standard toolholders? Yes, the insert’s ISO designation and tolerance class M ensure compatibility with standard indexable turning toolholders and facilitate reliable clamping and indexing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned only for explanatory purposes. There is no affiliation or partnership between our company and the trademark owners. The offered item is original and brand-new from the manufacturer.
TNMA220416-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Combine high wear resistance with dependable chip control and a geometry engineered for stable turning of cast iron; the result is efficient, repeatable machining with reduced downtime. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. TNMA220416-RK5 WKK20S – Triangular turning insert, Tiger·tec Silver coating by Walter Tools A high-performance triangular turning insert, TNMA220416-RK5 WKK20S, engineered for productive machining of cast iron components. Tiger·tec Silver coating for high wear resistance Optimised RK5 chipbreaker for cast iron chips Triangular 60° form with 1.6 mm corner radius 0° negative rake for stable cutting performance Increase productivity on abrasive cast-iron jobs The combination of the Tiger·tec Silver coating and the grade WKK20S delivers notable wear resistance under the intermittent, abrasive conditions typical of cast-iron turning. The insert is intended for applications where controlled, often short and brittle chips occur; the coating extends tool life while maintaining consistent cutting performance. As a consequence, cycle times can be reduced and insert change frequency decreased, supporting a smoother production flow for series turning operations. Stable geometry for repeatable surface quality With a 60° triangular form, a 1.6 mm corner radius and a 0° negative rake, the insert provides mechanical robustness and predictable engagement with the workpiece. These geometric choices promote stable cutting forces and reduced vibration, which in turn help to maintain dimensional accuracy and surface finish across repeated passes. The execution class A and tolerance class M indicate consistent manufacturing quality, suitable for customers who require reproducible results in serial machining. Chip control and coating that cut downtime The RK5 chipbreaker is specifically optimised for cast-iron chip formation, enabling reliable chip control even under interrupted cuts. Combined with the coated hardmetal substrate of the WKK20S grade, this indexable insert reduces the risk of built-up edge and unexpected wear. The net effect is fewer process interruptions, less manual chip handling, and improved machining uptime for workshop environments where cast iron is a primary material. Adaptability and practical application notes Designed for the machining of cast iron (ISO 513 group K), this insert belongs to the Tiger·tec Silver series and suits a range of turning operations where abrasion and short-chip behaviour dominate. The triangular layout allows three usable cutting edges per index, providing economical edge utilisation. For application-specific parameter selection and to verify compatibility with toolholders and turning cycles, Metav Werkzeuge can provide tailored recommendations and cutting data sheets. For specific application advice on Walter Tools' Tiger·tec Silver inserts and to arrange the optimal insert selection via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TNMA220416-RK5-WKK20S-WALTER Label: Drehwendeschneidplatte TNMA220416-RK5 WKK20S Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WKK20S Execution: A Facts Size: 22 mm Thickness code: 04 Corner radius: 1.6 mm Plate form: 60° triangle Free rake angle: 0° (negative) Chipbreaker: RK5 Tolerance class: M Special features Coating: Tiger·tec Silver Material: Coated hardmetal (carbide) Application: Cast iron machining (ISO group K) Insert designation: TNMA220416-RK5 WKK20S Suitable for abrasive, short-chip conditions Three cutting edges per triangular insert FAQ What materials is this insert designed for? The TNMA220416-RK5 WKK20S is optimised for cast iron (ISO group K) and engineered to handle abrasive, short-chip conditions typical of such materials. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker promotes controlled, short chip formation in cast iron, improving chip evacuation and reducing the risk of edge damage during interrupted cuts. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKK20S grade increases surface hardness and thermal resistance, which extends tool life and maintains cutting performance under abrasive loads. How many cutting edges are available per insert? The triangular 60° form offers three usable cutting edges per insert, enabling economical edge use and straightforward indexing when wear occurs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names, including Walter Tools, are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is original, factory-new goods of Walter Tools.
TNMG110304-FP5 WPP10G FP5 Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold grade combined with a compact 60° triangle form and a 0.4 mm corner radius ensures steady cutting performance in steel turning; order the insert through Metav Werkzeuge or request application advice from the technical team. TNMG110304-FP5 WPP10G turning indexable insert for steel, Tiger·tec Gold — Walter Tools A TNMG110304-FP5 WPP10G insert engineered for robust steel machining with a Tiger·tec Gold coating and a 0° negative rake, optimised for reliable chip control in demanding turning operations Tiger·tec Gold coated carbide grade WPP10G Optimised for steel machining (ISO P) Triangle 60° form with 0.4 mm corner radius Negative 0° rake for stable cutting Maximised process security and consistent performance The Tiger·tec Gold grade delivers stable edge behaviour and predictable wear rates under typical steel cutting temperatures. The combination of the WPP10G grade and the coated cemented carbide substrate provides improved resistance to abrasive wear while maintaining toughness for interrupted cuts. This results in fewer tool changes, consistent component tolerances and less scrap, supporting a steady production flow and higher machine utilisation. Precise chip control with economy in focus Equipped with the FP5 chipbreaker and a triangle 60° geometry, the insert promotes controlled chip formation across a range of feeds and depths for ISO P materials. The negative 0° rake offers enhanced cutting stability, which is particularly beneficial on long or cantilevered tool overhangs. Reduced vibration and reliable chip evacuation translate into extended insert life and lower per-part tooling costs, making this solution economically compelling for batch and series production. Practical handling and compatibility for workshop use The insert’s 11 mm inscribed circle and 03 plate thickness align with common toolholder systems, easing inventory management and retrofit into existing tool sets. The 0.4 mm corner radius provides a balance between edge strength and surface finish, supporting both medium-roughing and finishing passes on steel. Clear specification of form and tolerance class simplifies setup and reduces downtime during tool changes, improving overall operational efficiency. Material suitability and application guidance Specifically formulated for the machining of steel (ISO P), the grade’s coating technology enhances thermal stability and wear resistance during continuous turning. The coated hardmetal construction is designed to accommodate the heat and chip behaviour typical when machining unalloyed and alloyed steels, delivering repeatable results across common production scenarios. For tailored application advice or to source genuine Walter Tools TNMG110304-FP5 WPP10G turning inserts, contact Metav Werkzeuge for fast technical support and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TNMG110304-FP5-WPP10G-WALTER Name/code: TNMG110304-FP5 WPP10G Manufacturer: Walter Tools Product type: Turning indexable insert Facts Inscribed circle: 11 Plate thickness: 03 Corner radius: 0.4 mm Free rake angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated cemented carbide) Chipbreaker: FP5 Execution: G Material application: Steel (ISO P) FAQ What materials is this insert intended for? The TNMG110304-FP5 WPP10G insert is designed primarily for steel machining and follows the ISO P designation for material suitability. How does the Tiger·tec Gold series improve performance? The Tiger·tec Gold coating on the Walter Tools grade enhances wear resistance and thermal stability, which helps maintain a reliable cutting edge and longer tool life in turning applications. What does the 0.4 mm corner radius affect in practice? A 0.4 mm corner radius provides increased edge strength for medium cuts while still enabling acceptable surface finish, offering a practical compromise between durability and finish quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and do not indicate any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TNMG110304-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Reliable machining performance and extended tool life result from the combination of the Tiger·tec Gold coating and the WPP10G grade together with the MP3 chipbreaker; this reduces rework and keeps cycle times stable. Order the TNMG110304‑MP3 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG110304-MP3 WPP10G — Turning indexable insert, MP3 chipbreaker for steel (Walter Tools) A TNMG110304‑MP3 WPP10G is a triangular 60° turning indexable insert designed for robust steel machining, offering a coated carbide grade optimised for wear resistance and consistent chip control. Tiger·tec Gold coating for high tool life WPP10G: coated carbide for steel machining MP3 chipbreaker for controlled chip formation Triangular 60° shape with 0.4 mm corner radius Maximise productivity with a wear-resistant grade The combination of the Tiger·tec Gold coating and the WPP10G grade delivers a significant improvement in wear resistance and process stability for steel machining. The multi-layer coating reduces flank and crater wear during continuous turning, which leads to longer life between index changes and fewer interruptions on the shop floor. As a result, machining programmes remain consistent over longer runs, improving overall equipment effectiveness and reducing downtime for insert changes. Precise chip control and machining security The MP3 chipbreaker is designed to produce predictable, segmented chips when turning a wide range of steels, helping to avoid entanglement and improving swarf evacuation in both wet and dry conditions. The insert’s negative 0° rake provides a robust cutting edge, which is especially valuable under interrupted cuts or when facing tougher feed conditions. Together these features reduce the risk of surface defects and downstream rework, enabling more reliable batch production and repeatable part quality. Geometry tailored for strength and finishing A triangular 60° form with a 0.4 mm corner radius balances edge strength and the capacity to achieve fine surface finishes on turned components. The insert thickness coded as 03 contributes to edge stability, while the tolerance class M ensures consistent seating in compatible toolholders. This geometry makes the insert suitable for a variety of turning tasks on unalloyed and alloyed steel, from light profiling to general turning operations, while preserving edge life and dimensional reliability. Contact Metav Werkzeuge for technical advice on Walter Tools TNMG110304‑MP3 WPP10G and to request cutting data sheets or tailored recommendations for specific steel grades Technical data Article number / SKU: TNMG110304-MP3-WPP10G-WALTER ISO designation: TNMG110304-MP3 WPP10G Product type: Turning indexable insert Grade: WPP10G Series: Tiger·tec Gold Chipbreaker: MP3 Shape: Triangle 60° Corner radius: 0.4 Free angle: 0° (negative) Thickness: 03 Size: 11 Tolerance class: M Material application: Steel (P) Facts Corner radius: 0.4 mm Size (inscribed circle): 11 Thickness code: 03 Free angle: 0° Tolerance class: M Special features Coating: Tiger·tec Gold Coated carbide grade: WPP10G Chip control: MP3 chipbreaker Intended for: Steel machining Insert geometry: triangular 60° Robust negative-rake design FAQ What steels is this insert suitable for? The TNMG110304‑MP3 WPP10G from Walter Tools is formulated for machining unalloyed and alloyed steel (group P), with the WPP10G grade optimised for a balance of wear resistance and toughness on typical steel workpieces. How does the MP3 chipbreaker improve turning operations? The MP3 chipbreaker controls chip form to produce short, manageable chips during turning; when combined with the Tiger·tec Gold coating on the TNMG110304‑MP3 WPP10G, this enhances swarf evacuation and reduces the chance of chip-related interruptions. What benefits does the Tiger·tec Gold series provide? Tiger·tec Gold coatings on the WPP10G grade increase resistance to flank and crater wear, extending the insert life and maintaining more consistent surface finish and dimensional stability across longer production runs. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG110304-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a robust cutting solution that combines the Tiger·tec Gold grade with the WPP20G coating technology for reliable steel machining, precise chip control via the MP3 chipbreaker and a compact triangle geometry that reduces tool change frequency; order the insert directly via Metav Werkzeuge or consult their experts for application-specific parameters. TNMG110304-MP3 WPP20G — Turning insert for steel — Walter Tools The TNMG110304-MP3 WPP20G is an indexable triangle 60° turning insert engineered for productive steel machining with a coated-carbide grade optimised for stable wear behaviour. Tiger·tec Gold series high wear resistance Grade WPP20G optimised for steel MP3 chipbreaker for controlled chip formation Triangle 60° geometry with 0.4 mm radius Productivity gains through optimised grade and coating The combination of Tiger·tec Gold technology and the WPP20G grade provides a measurable improvement in tool life and process stability when turning steel. The coating system and substrate are designed to resist the typical heat and abrasion encountered during continuous machining, which translates into longer tool cycles and fewer interruptions for insert changes. With a 0° negative rake and a compact triangle 60° form, the insert maintains a stable cutting edge under a range of cutting conditions, enabling predictable tool wear and improved component tolerances. The result is a more efficient production flow and less rework on turned parts. Consistent chip control and surface quality for machining operations The MP3 chipbreaker is dedicated to efficient chip formation and evacuation, reducing the risk of built-up edge and improving surface finish on turned components. The insert’s 0.4 mm corner radius offers a balance between edge strength and the ability to produce fine surface finishes, making it suitable for medium and finishing cuts in unalloyed and alloyed steels. The geometry supports reliable chip breaking even under variable feed rates, which helps to maintain machining consistency across batches and reduces tool-related downtime. Durability and fit: fewer tool changes, steady production Manufactured as a coated carbide insert with the execution code G and tolerance class M, this indexable solution is intended for industrial use where repeatability and economic performance are priorities. The combination of the carefully selected grade and the MP3 chipbreaker contributes to predictable wear progression and longer intervals between indexing. For workshop planners and production engineers, that means reduced tooling costs per component and a higher overall equipment effectiveness (OEE), while toolroom staff benefit from straightforward handling and proven compatibility with standard turning toolholders. Contact Metav Werkzeuge for tailored cutting data, stock availability and expert advice on the Walter Tools TNMG110304-MP3 WPP20G turning insert for steel applications Technical data SKU: TNMG110304-MP3-WPP20G-WALTER Designation: TNMG110304-MP3 WPP20G Product type: Turning insert Brand: Walter Tools Facts Inscribed circle: 11 mm Plate thickness: 3 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP3 Geometry: G Coating/material: coated carbide Application: steel FAQ Is this insert suitable for machining steel? Yes. The TNMG110304-MP3 WPP20G is explicitly designed for machining steel materials and is optimised for the thermal and chip-formation behaviour typical of steel turning. What benefits does the Tiger·tec Gold technology deliver? Tiger·tec Gold in the WPP20G grade enhances wear resistance and heat management, which supports longer tool life and consistent performance during serial production with the Walter Tools insert. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker promotes reliable chip formation and evacuation, improving surface finish and reducing the likelihood of chip-related interruptions when using the TNMG110304-MP3 WPP20G insert. How many cutting edges are available per insert? The triangle 60° design provides three indexable cutting edges per insert, enabling multiple repositions before replacement and contributing to lower tooling costs per component. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is original, brand-new merchandise from Walter Tools.
TNMG110308-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Block contains a concise buying recommendation: combine high productivity, consistent chip control and low-maintenance operation for uninterrupted turning processes. Order original Walter Tools inserts through Metav Werkzeuge or consult our application specialists for cutting data and process support. TNMG110308-FP5 WPP10G indexable turning insert — Tiger·tec Gold coated, FP5 chipbreaker (Walter Tools) The TNMG110308-FP5 WPP10G is a coated indexable turning insert designed for general turning of steel, offering economical wear resistance and dependable chip control in medium to high cutting conditions. Tiger·tec Gold coating for long tool life WPP10G grade optimised for steel machining FP5 chipbreaker for stable chip control 60° triangular insert with 0.8 mm radius Boosted productivity through predictable cutting performance The combination of the WPP10G grade and Tiger·tec Gold coating delivers a reliable balance between wear resistance and toughness, which translates into extended tool life and fewer index changes. The coated carbide substrate helps to reduce flank wear under typical steel turning conditions, enabling longer uninterrupted cutting cycles. With the FP5 chipbreaker, chips are formed and evacuated consistently, reducing the risk of stringing or entanglement and improving machine uptime. These technical attributes are presented as tangible productivity gains: fewer tool interventions, steadier surface quality and a more predictable tool-cost-per-part. Reliable chip control and process stability for routine turning Designed around a well-defined chip management concept, the insert’s FP5 geometry promotes short, manageable chips when machining unalloyed and alloyed steels. The 60° triangular shape provides three cutting edges per index, supporting a cost-effective cutting strategy, while the 0.8 mm corner radius offers a balance between edge strength and finished surface integrity. The negative 0° rake (negative geometry) enhances edge robustness during interrupted cuts and moderate depth-of-cut operations, creating a stable cutting process that suits general-purpose turning tasks in job shops and batch production. Practical advantages for shop-floor application and set-up This insert is supplied in the TNMG format familiar to most turning toolholders, allowing direct integration into standard tool systems without special adapters. The designation and geometry coding simplify reordering and tool planning, and the coated grade is intended specifically for machining steel, aligning with ISO P recommendations for general turning. For workshops seeking straightforward parameter selection, the insert’s combination of grade and chipbreaker narrows the range of cutting speeds and feeds that deliver consistent results, making set-up quicker and reducing trial-and-error during process development. Durability, quality and brand reliability Walter Tools’ Tiger·tec Gold technology is engineered to provide stable edge performance across a broad range of steel types, emphasising reproducible results and tool life optimisation. The WPP10G sort — a coated carbide — is positioned as an economical, wear-resistant option for everyday turning, offering a favourable balance of cost-efficiency and surface finish. Choosing this insert supports steady productivity and predictable maintenance intervals, which is particularly valuable for production planners who prioritise process reliability and repeatable part quality. Contact Metav Werkzeuge for tailored cutting-data recommendations and to source original Walter Tools inserts — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 Technical Data SKU: TNMG110308-FP5-WPP10G-WALTER Label: Drehwendeschneidplatte TNMG110308-FP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Designation: TNMG110308-FP5 Full designation: TNMG110308-FP5 WPP10G Grade: WPP10G Series: Tiger·tec Gold Numbers / Core technical data Size designation: 11 Thickness code: 03 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features / Versions Coating technology: Tiger·tec Gold Substrate / grade: WPP10G (coated carbide) Chipbreaker: FP5 Insert form: triangle 60° Execution: G (negative geometry) Material application: steel (ISO P) FAQ What materials is this insert suitable for? The TNMG110308-FP5 WPP10G insert is intended primarily for steel machining; the WPP10G grade and Tiger·tec Gold coating are optimised for ISO P applications. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on this Walter Tools insert produces short, controllable chips in many steel turning operations, improving chip evacuation and process stability. Can this insert be used for interrupted cuts? Yes — the negative 0° rake and the chosen corner radius give the insert enhanced edge strength, making it suitable for interrupted turning and robust general-purpose work. How many cutting edges does a TNMG triangular insert provide? A 60° triangular insert like this offers three indexable cutting edges, allowing economical rotation to fresh edges as wear develops. Is the WPP10G grade suitable for finishing or roughing operations? The WPP10G grade is positioned as a versatile, wear-resistant option for routine turning; it performs well in both finishing and medium turning scenarios on steel, depending on chosen cutting data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. The mention of brand names (Walter Tools) is for explanation only and does not imply any affiliation. The offered item is original, brand-new merchandise supplied by the manufacturer.
TNMG110308-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the MP3 chipbreaker to achieve stable chip formation and extended edge life in steel turning; order directly via Metav Werkzeuge or consult our specialists for technical guidance. TNMG110308-MP3 TNMG110308-MP3 WPP10G WPP10G — Turning indexable insert for steel by Walter Tools The TNMG110308-MP3 WPP10G is a triangular turning indexable insert engineered for steel machining, combining a robust coated‑carbide grade with a chipbreaker optimised for stable cutting. Tiger‑tec Gold coating for longer tool life MP3 chipbreaker for stable chip control 0° negative rake for reliable edge support Consistent cutting performance for steel applications The combination of the Tiger‑tec Gold coating and the WPP10G grade delivers a balance of wear resistance and toughness tailored to steel machining (ISO P). The coated‑carbide specification ensures stable cutting under typical steel heat and chip‑formation conditions, while the MP3 chipbreaker supports predictable chip geometry. With a corner radius 0.8 mm and 0° negative rake, the insert provides robust edge support that reduces chipping risk during interrupted cuts and heavy engagement. This translates into fewer tool changes and improved process reliability on batch and single‑part production. Predictable chip control and prolonged edge life The dedicated MP3 chipbreaker is calibrated to promote consistent chip flow for a wide range of feeds, helping to avoid entangling or long, stringy chips that slow machining cycles. Combined with the Tiger‑tec Gold surface treatment, the insert resists abrasive wear and maintains a sharper cutting edge for longer periods. The result is reduced downtime and more predictable maintenance intervals, supporting higher machine utilisation and better cost efficiency per produced component. Geometry and workshop compatibility for practical use The insert’s triangular 60° form with a nominal size 11 and plate thickness 03 suits common turning toolholders for indexable inserts, offering three usable cutting edges per insert. The 0.8 mm corner radius supports semi‑finishing to roughing operations, depending on parameter selection, while the negative 0° rake enhances edge strength for heavier cuts. Classified for steel (ISO P), the grade covers a spectrum from wear‑resistant cuts to more universal tasks; the internal categorisation (10 = wear‑resistant, 20 = universal, 30/35 = tougher) indicates adaptability across process requirements. Productivity and surface‑quality advantages Using this insert supports higher process stability and consistent surface results in steel turning, with the Tiger‑tec Gold technology contributing to reproducible performance and less scatter in tool life. The robust edge and chip control help to achieve uniform finishes and reduce rework, which directly benefits production throughput and component quality. For operations seeking a balance between tool life and cutting reliability, this insert provides a pragmatic solution backed by a reputable tooling brand. For reliable steel turning with Walter Tools’ Tiger‑tec Gold technology, request these inserts from Metav Werkzeuge or contact our technical advisors via info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific applications Technical data Article number: TNMG110308-MP3-WPP10G-WALTER Product type: Turning indexable insert Series: Tiger‑tec Gold Grade/sort: WPP10G Chipbreaker: MP3 Facts Corner radius: 0.8 mm Insert shape: Triangle 60° Rake angle: 0° (negative) Size: 11 Thickness: 03 Tolerance class: M Special features Coated carbide grade (Tiger‑tec Gold) Designed for steel (ISO P) Robust edge for interrupted cuts Three cutting edges per insert Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TNMG110308-MP3 WPP10G is specified for steel (ISO P), designed for unalloyed and alloyed steels where typical heat and chip formation characteristics occur. What are the key geometry and chip‑control features? The insert has a 60° triangle form, 0.8 mm corner radius, 0° negative rake and the MP3 chipbreaker, providing edge strength and consistent chip formation for turning operations. How does the Tiger‑tec Gold technology benefit machining? Tiger‑tec Gold enhances wear resistance and edge stability on the WPP10G grade, resulting in extended tool life and more reproducible cutting performance in steel machining. Is the insert suitable for heavy interrupted cuts? The negative 0° rake and the substantial 0.8 mm corner radius give the insert enhanced edge support, making it appropriate for interrupted cuts within recommended cutting parameters. How many cutting edges are available per insert? The triangular shape offers three usable cutting edges, which supports efficient index‑based tool changes and economical material utilisation. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
TNMG110308-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP3 chipbreaker for dependable chip control and a long tool life; the triangular geometry and 0.8 mm corner radius deliver stable turning performance across a wide range of steel grades. Order the TNMG110308-MP3 WPP20G insert directly via Metav Werkzeuge or consult our specialists for grade and cutting data. TNMG110308-MP3 WPP20G indexable turning insert — Tiger·tec Gold, for steel, Walter Tools TNMG110308-MP3 WPP20G is an indexable turning insert designed for productive steel machining, featuring the Tiger·tec Gold grade and an MP3 chipbreaker for reliable chip control Tiger·tec Gold coated carbide grade WPP20G MP3 chipbreaker for controlled chip formation Triangle 60° insert with 0.8 mm corner radius Negative 0° clearance for stable turning Consistent chip control that reduces interruptions and improves process reliability The combination of the MP3 chipbreaker and the Tiger·tec Gold technology yields controlled chip formation, minimising interruptions caused by erratic chips during turning operations. The chipformer is tuned for the thermal and mechanical behaviour typical of machining steel, which means fewer stoppages for chip clearing and a smoother process flow. This leads to more predictable cycle times and supports a higher level of process reliability on the shop floor. Long tool life and wear resistance for economical batch machining The WPP20G grade is a coated carbide designed for a balanced performance: wear resistance for extended life with sufficient toughness for a range of steel types. The coating reduces flank wear and increases resistance to abrasive conditions, which translates into longer intervals between index changes and lower tooling costs per part. For operations where repeatability and uptime matter, the insert’s construction delivers measurable gains in productivity and economy. Stable geometry for repeatable surface quality and dimensional accuracy The triangular geometry with a 60° point angle and the 0.8 mm corner radius provide a robust cutting edge that contributes to consistent surface finish and dimensional control. The negative 0° clearance enhances rigidity in the cutting zone, which is beneficial for interrupted cuts and heavier cross-sections. These geometric features support reliable results on a variety of steels and help maintain part tolerances across extended runs. Practical compatibility and straightforward integration into existing toolholders The insert follows the ISO-based designation and fits standard toolholders that accept TNMG-style inserts, making arrival into existing tool setups uncomplicated. The insert size 11 and listed thickness 03 correspond with common TNMG dimensions, enabling a quick exchange and minimising setup effort. The Walter Tools grade is suitable for conventional turning strategies, and the coated carbide substrate allows adaptation to different cutting parameters without sacrificing performance. Contact Metav Werkzeuge for personalised cutting data, matching toolholders and recommendations for optimal cutting parameters with Walter Tools Tiger·tec Gold inserts Technical Data Article number: TNMG110308-MP3-WPP20G-WALTER Designation: TNMG110308-MP3 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Corner radius: 0.8 mm Insert size: 11 Thickness: 03 Shape angle: 60° Clearance angle: 0° (negative) Tolerance class: M Special features MP3 chipbreaker Coated carbide grade (Tiger·tec Gold) Application group: P (steel) Triangle insert form Robust edge for interrupted cuts FAQ What materials is this insert suited for? The TNMG110308-MP3 WPP20G insert is optimised for steel applications (material group P) and performs reliably across a wide range of unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating increases wear resistance and thermal stability, improving the insert’s service life and maintaining cutting-edge integrity under typical steel machining conditions. What are the main benefits of the MP3 chipbreaker? The MP3 chipbreaker ensures controlled chip formation, which reduces the risk of entanglement, improves surface quality and decreases downtime for manual chip removal. Is the insert compatible with standard TNMG toolholders? Yes, the ISO-based TNMG designation means the insert fits standard TNMG toolholders; check holder compatibility with insert thickness and seat geometry before mounting. Can this grade be used for interrupted cuts? The triangular geometry and negative 0° clearance provide added rigidity, making the insert suitable for interrupted cuts and applications requiring a robust cutting edge. Walter Tools — Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TNMG160304-MP3 WPP20G G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP3 chipbreaker to combine long tool life with consistent chip control for steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG160304-MP3 WPP20G indexable turning insert, Tiger·tec Gold, for steel — Walter Tools TNMG160304-MP3 WPP20G is an indexable turning insert designed for productive steel machining, offering a coated carbide grade optimised for general-purpose turning. Tiger·tec Gold coating for extended tool life MP3 chipbreaker ensures reliable chip control Triangle 60° geometry for flexible turning Suitable for steel machining (P group) Durable coating for extended productive cycles The insert uses the Tiger·tec Gold technology, a high-performance coated carbide grade that delivers improved wear resistance and stable cutting-edge behaviour. This coating reduces flank and crater wear during medium-duty to heavy-duty turning, which translates into longer edge life and fewer tool changes. For production environments processing unalloyed and alloyed steel (P), the result is a more consistent cycle time and reduced downtime, supporting a reliable machining process. Geometry engineered for consistent chip formation With a triangle 60° geometry and the MP3 chipbreaker, the design promotes predictable chip control and stable cutting forces. The insert’s edge radius 0.4 mm and negative rake 0° contribute to a robust cutting edge suited to interrupted cuts and general turning operations. These geometric choices help maintain surface finish quality while allowing for straightforward parameter selection on conventional and CNC lathes. Practical benefits on the shop floor and process security The grade WPP20G is positioned as a universal, wear-resistant option for a wide range of steels, balancing economy and life expectancy. Fewer tool interventions, combined with predictable wear characteristics, support higher machine utilisation and lower overall tooling costs. The insert’s combination of coating, chipbreaker and geometry supports operators and process planners in achieving repeatable results with reduced setup optimisation time. For application advice or to secure the TNMG160304-MP3 WPP20G from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast availability. Technical data SKU: TNMG160304-MP3-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG160304-MP3 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Product type: Indexable turning insert ISO designation: TNMG160304-MP3 WPP20G Facts Corner radius: 0.4 mm Free angle: 0° (negative) Insert size: 16 Thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: MP3 Geometry: Triangle 60° Material application: Steel (P) Grade purpose: Universal wear-resistant turning FAQ Is this insert suitable for machining alloyed steels? The WPP20G grade is designed for the P material group, which includes unalloyed and alloyed steels; the TNMG160304-MP3 WPP20G is therefore suitable for many steel turning tasks. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold improves wear resistance and edge stability, extending tool life and enabling more consistent performance in steel machining with the WPP20G grade. Can the insert handle interrupted cuts and roughing operations? The combination of a negative rake 0° and an edge radius of 0.4 mm gives the insert robust edge strength, making it appropriate for interrupted cuts and many roughing applications. How does the MP3 chipbreaker affect surface finish and chip control? The MP3 chipbreaker is engineered to produce controlled chips and stable cutting forces, which aids in maintaining a consistent surface finish while improving process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. References to Walter Tools are for clarification purposes only and do not imply any affiliation with our company. The offered item is an original, factory-new product of the manufacturer.
TNMG160308-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Combining a high-performance Tiger‑tec Gold coating with a proven MP5 chipbreaker delivers sustained tool life and consistent chip control for steel machining; ideal where productivity and surface quality matter. Order the TNMG160308-MP5 WPP20G directly via Metav Werkzeuge or contact our consultants for tailored cutting data and application advice. TNMG160308-MP5 WPP20G — Indexable turning insert for steel, Tiger‑tec Gold (Walter Tools) TNMG160308-MP5 WPP20G is an indexable turning insert designed for robust and economical machining of steels, offering reliable chip control and long tool life. Tiger‑tec Gold coating for extended tool life WPP20G grade optimised for steel Triangle 60° geometry for versatile turning MP5 chipbreaker for dependable chip control Maximise uptime with durable coating and stable cutting edges The combination of the Tiger‑tec Gold coating and the WPP20G grade produces a coated carbide insert that resists wear and preserves the cutting edge under typical steel cutting temperatures. This coating technology reduces flank and crater wear, which in turn extends the service interval and lowers tooling costs per part. For production environments where consistent performance is required, the hardened surface of the insert supports repeatable results and reduces unplanned tool changes, improving overall process efficiency. Achieve reliable chip control and consistent surface finish Engineered with the MP5 chipbreaker and a triangle 60° form, the insert provides controlled chip formation across a range of feeds. The 0° (negative) relief geometry and 0.8 mm corner radius deliver a balance between robustness and finishing capability, making the tool suitable for both semi‑finishing and finishing passes. Stable chip flow reduces the risk of rework and enhances surface quality, which is particularly important for assemblies and downstream processes that demand tight tolerances. Designed specifically for steel applications with practical benefits Rated for the ISO P group, this insert is tailored to the thermal and mechanical demands of unalloyed and alloyed steels. The tolerance class M and the standardised TNMG160308-MP5 WPP20G designation ensure compatibility with commonly used toolholders and straightforward inventory management. Because the insert is indexable, edge changes are fast and repeatable, which supports lean manufacturing practices and shortens setup times in batch production. For machining steel with the Tiger‑tec Gold grade, contact Metav Werkzeuge for cutting parameters, batch availability and application support; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG160308-MP5-WPP20G-WALTER Designation: TNMG160308-MP5 ISO designation: TNMG160308-MP5 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Inscribed circle: 16 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate thickness: 03 Tolerance class: M Special features Chipbreaker: MP5 Shape: Triangle 60° Material group: P (Steel) Execution: G Coated carbide as cutting material Application focus: machining of steels according to ISO P FAQ Which materials is this insert suited for? The TNMG160308-MP5 WPP20G insert is optimised for ISO group P materials, meaning it is primarily intended for unalloyed and alloyed steels. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating increases wear resistance and thermal stability, which prolongs tool life and supports more stable machining cycles on steel. How does the MP5 chipbreaker perform across feeds? The MP5 chipbreaker produces consistent chips at a wide range of feed rates, promoting safe evacuation and improving surface finish during turning operations. Is the geometry suitable for finishing passes? Yes. The combination of a 0.8 mm corner radius and the triangle 60° form allows for controlled finishing while maintaining edge strength for light to moderate interrupted cuts. Are these inserts compatible with standard toolholders? The TNMG‑type ISO designation ensures compatibility with standard TNMG toolholders; correct clamping and indexation are required for safe use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
TNMG160404-FM5 WMP20G G Wendeplatten - Walter Tools
Combining Tiger·tec Gold durability with the FM5 chipbreaker, this insert delivers stable chip control and extended edge life for machining stainless steel. Benefit from the rigid Triangle 60° geometry and a small corner radius for consistent surface quality. Order the TNMG160404-FM5 WMP20G directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404-FM5 WMP20G indexable turning insert — Tiger·tec Gold grade for stainless steel — Walter Tools A TNMG160404-FM5 WMP20G indexable turning insert designed for efficient turning of stainless steel in medium to robust conditions, combining a coated carbide grade with a controlled chipbreaker for stable process behaviour. Tiger·tec Gold coating for robust edge life FM5 chipbreaker for controlled chip formation Optimised for stainless steel (ISO group M) Triangle 60° geometry, 0.4 corner radius Superior chip control for reliable cycle times The combination of the WMP20G grade and the FM5 chipbreaker provides controlled, short chips and steady removal of material when machining stainless steel. The Tiger·tec Gold coating reduces flank and crater wear under typical stainless-steel cutting conditions, which helps maintain a stable cutting edge and reduces unplanned tool changes. This results in more predictable cycle times and less scrap, supporting higher operational efficiency on turning centres and lathes. Consistent surface finish through optimised geometry The triangular 60° insert form, paired with a 0.4 corner radius and 0° (negative) rake, produces a robust cutting edge that resists edge chipping and built-up edge formation. The geometry supports repeatable workpiece accuracy and consistent surface quality even when feeds and depths vary slightly. Such stability is particularly valuable for medium-duty to heavier turning tasks on stainless steel where thermal and mechanical stresses can otherwise degrade finish and tolerance control. Practical advantages for workshop productivity Built as a coated carbide, WMP20G targets the specific challenges of stainless steel: toughness, tendency to form built-up edges and elevated cutting temperatures. The insert’s configuration simplifies tool planning—fewer regrinds and predictable edge life lower tooling costs in the mid to long term. For application support or grade comparison, Metav Werkzeuge can provide cutting-data recommendations and help match the insert to the machining strategy, preventing guesswork at setup and accelerating time to first good part. For tailored recommendations on Walter Tools' Tiger·tec Gold grade or to procure the TNMG160404-FM5 WMP20G, contact Metav Werkzeuge for application advice and quick delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMG160404-FM5-WMP20G-WALTER Designation: TNMG160404-FM5 Article: TNMG160404-FM5 WMP20G Manufacturer: Walter Tools Product type: Indexable turning insert Core data Shape angle: Triangle 60° Corner radius: 0.4 Thickness: 04 Size: 16 Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger-tec Gold Grade: WMP20G Coating: coated carbide Chipbreaker: FM5 Suitable for: stainless steel (ISO group M) FAQ Which materials is this insert intended for? The TNMG160404-FM5 WMP20G from Walter Tools is intended primarily for stainless steel (ISO group M), offering controlled chip formation and stable cutting-edge behaviour for such alloys. What benefit does the FM5 chipbreaker provide? The FM5 chipbreaker promotes short, controllable chips and reduces the risk of entanglement and built-up edge during machining of stainless steel, improving process reliability with the TNMG160404-FM5 WMP20G insert. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WMP20G grade enhances wear resistance and edge stability under the high temperatures typical for stainless steel machining, extending effective tool life and consistency of results. Is the TNMG160404-FM5 suitable for finishing operations? With a 0.4 corner radius and triangle 60° form, the insert balances robustness and fineness of cut; it can be used for semi-finishing and general turning where a reliable surface finish is required. Is this an original Walter Tools product? Yes, the TNMG160404-FM5 WMP20G is an original, factory-new Walter Tools insert supplied under the stated SKU. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names (including Walter Tools) are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product from the manufacturer.
TNMG160404-FM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting geometry, Tiger·tec Silver coated carbide, and reliable chip control for consistent turning of rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404-FM5 WMP20S indexable turning insert for rostfreier Stahl — Walter Tools TNMG160404-FM5 WMP20S is a triangular indexable insert designed for turning operations in rostfreier Stahl and similar demanding materials Tiger·tec Silver coating for extended tool life Optimised for rostfreie Stähle (M) and stable chips Triangle 60° form with 0.4 mm corner radius FM5 chipbreaker for consistent surface finish Long-lasting performance for demanding rostfreier Stahl turning The insert combines the Tiger·tec Silver coating with the WMP20S grade to deliver enhanced wear resistance and stable edge behaviour when machining rostfreier Stahl. The coated carbide construction supports sustained cutting under the high temperatures and adhesion tendencies typical of these alloys, reducing the frequency of tool changes and helping to maintain consistent component tolerances. By favouring a cutting grade tuned to the material group M, the insert promotes secure chip formation and fewer built-up edges, which in turn helps to preserve machine uptime and improve overall process efficiency. Geometry and chip control that reduce rework and improve surface quality A triangle 60° configuration paired with a 0.4 mm corner radius provides a reliable balance between strength and form accuracy for turning profiles. The FM5 chipbreaker is engineered to control swarf and support even chip evacuation in interrupted or continuous cuts, lowering the risk of re-cutting and surface defects. The 0° (negative) relief angle offers a robust cutting edge for heavier feed and depth of cut conditions, enabling stable performance on components where repeatability matters. These geometry choices make the insert suitable for a range of turning tasks where surface finish and dimensional stability are priorities. Process security, workshop efficiency and integration into production Designed for reliable, repeatable results, this insert supports productive machining cycles and reduced scrap rates. The combination of coating technology and dedicated chip control contributes to predictable tool life and machining behaviour, which simplifies process planning and reduces inspection overhead. For application support or to confirm suitability in a specific turning cell, Metav Werkzeuge provides technical advice and can assist with selecting matching toolholders and cutting parameters; contact details are available for straightforward consultation. The insert is a practical choice where consistent surface quality and stable manufacturing flow are required. Contact Metav Werkzeuge to specify the Walter Tools TNMG160404-FM5 WMP20S for rostfreier Stahl applications and obtain tailored cutting data or procurement support Technical data Article number: TNMG160404-FM5-WMP20S-WALTER Designation: TNMG160404-FM5 WMP20S Manufacturer: Walter Tools Series: Tiger-tec Silver Core data Plate size: 16 Plate thickness: 04 Corner radius: 0.4 mm Plate form: Dreieck 60° Relief angle: 0° (negative) Special features Chipbreaker: FM5 Grade: WMP20S (coated carbide) Material application: rostfreier Stahl Execution: G Series description: WMP20S is a Walter cutting grade; coated carbide; part of Tiger·tec Silver FAQ What materials is this insert intended for? The TNMG160404-FM5 WMP20S insert from Walter Tools is optimised for rostfreier Stahl and performs reliably under the characteristic thermal and adhesion challenges of these alloys. What does the WMP20S grade indicate? WMP20S denotes Walter’s coated-carbide grade within the Tiger·tec Silver family, selected for stable chip formation and wear resistance when machining material group M (rostfreier Stahl). How does the FM5 chipbreaker improve turning results? The FM5 chipbreaker provides controlled chip formation and evacuation, helping to reduce re-cutting and deliver a more consistent surface finish when using the TNMG insert. Is the TNMG160404-FM5 compatible with standard TNMG toolholders? The triangular 60° TNMG form matches standard toolholders for TNMG inserts; verify the seat and clamping type to ensure correct fit for the intended holder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names belong to their respective owners and are mentioned for explanatory purposes only. The offered item is an original, factory-new product of the manufacturer.
TNMG160404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the high thermal stability of the Tiger‑tec Silver grade and the WSM10S chip‑grade to secure consistent chip control and edge life when machining stainless steels and heat‑resistant alloys; order queries and technical advice are available through Metav Werkzeuge for seamless integration into production. TNMG160404-FM5 WSM10S turning insert — Tiger‑tec Silver, triangular 60°, 0° negative, Walter Tools The TNMG160404-FM5 WSM10S is a triangular turning indexable insert engineered for heavy‑duty finishing and semi‑finishing of stainless steels and heat‑resistant superalloys, combining a robust coated grade with an FM5 chipbreaker. Tiger‑tec Silver coating technology FM5 chipbreaker for stable chip control 0° negative rake for secure cutting edge Triangle 60° form, 0.4 mm corner radius High cutting reliability for demanding materials The combination of the WSM10S grade and Tiger‑tec Silver coating delivers improved wear resistance and heat management during turning of stainless steel and alloys in ISO groups M and S. The FM5 chipbreaker promotes controlled chip formation, reducing the risk of built‑up edge and enabling steadier surface finish. Because the insert has a 0° negative rake, the cutting edge is mechanically supported, which enhances stability under interrupted cuts and high cutting temperatures. These properties translate into fewer tool changes and steadier cycle times in series production. Practical benefits at tool setup and in process control The triangle 60° geometry with a 0.4 mm corner radius offers a balance between strength and detail in the cutting edge, suitable for finishing passes or light profiling where edge integrity is essential. The insert’s designation as TNMG160404‑FM5 WSM10S indicates a familiar ISO form and an FM5 chip‑control geometry, simplifying tool selection and toolholder matching in standard turret systems. For workshop planning, the clear specification of coating, grade and chipbreaker supports predictable tool life estimates and easier process parameter optimisation. Minimal adjustment, consistent results in production When integrated into a compatible toolholder and correct clamping, the insert requires only standard mounting steps yet pays off through stable chip control and improved edge life thanks to the coated grade. The tolerance class M supports reproducible seating and repeatability in automated setups. Maintenance routines remain straightforward: periodic inspection of the cutting edge and replacement once wear criteria are reached keeps cycle quality consistent without additional process complexity. For reliable machining with Walter Tools' Tiger‑tec Silver grade, request a tailored cutting recommendation or a quotation via Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TNMG160404-FM5-WSM10S-WALTER Label: Drehwendeschneidplatte TNMG160404-FM5 WSM10S Walter Tools Product type: Turning insert Series: Tiger‑tec Silver Grade: WSM10S Facts Size: 16 Plate thickness: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Materials and features Coating: Tiger‑tec Silver Chipbreaker: FM5 Shape: Triangle 60° Grade suitability: S / M (heat‑resistant alloys, stainless steels) Execution: G FAQ Which materials is this insert suitable for machining? The TNMG160404‑FM5 WSM10S turning insert is specified for ISO groups M and S, i.e. stainless steel and heat‑resistant superalloys (including titanium in many applications), where thermal resistance and edge stability are required. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WSM10S grade reduces flank and crater wear by improving heat resistance and lubricity at the cutting zone, resulting in more consistent tool life under elevated cutting temperatures. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker is designed for controlled chip formation during turning operations, improving evacuation of chips and reducing the risk of built‑up edge for a better surface finish. Why is the 0° negative rake significant? A 0° negative rake gives mechanical support to the cutting edge, increasing stability in interrupted cuts and when machining tougher alloys, which contributes to predictable performance in production. What does the corner radius mean for finishing work? The 0.4 mm corner radius provides a compromise between strength and surface quality: it supports edge robustness while still allowing fine finishing and contour definition. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and product names are the property of their respective owners. Mention of brand names serves informational purposes only; there is no affiliation between our company and the trademark owners. The offered item is original and factory new.
TNMG160404-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver technology and the WSM20S grade, this triangular insert delivers stable edge life and reliable chip control when machining difficult-to-cut alloys. The compact 0.4 mm corner radius and negative 0° rake provide robust cutting performance for demanding turning tasks. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404-FM5 WSM20S Walter Tools — triangular indexable turning insert for rostfreier Stahl and superalloys TNMG160404-FM5 WSM20S is a triangular indexable turning insert engineered for heavy and interrupted cuts in rostfreier Stahl and heat‑resistant superalloys, combining a robust geometry with Walter Tools’ Tiger·tec Silver coating. Tiger·tec Silver coated carbide for heat resistance Grade WSM20S optimised for rostfreier Stahl and S materials FM5 chipbreaker for predictable chip formation 60° triangular form with 0.4 mm corner radius Precision and reliability where interrupted cuts occur The indexable insert combines a coated carbide substrate with the Tiger·tec Silver coating to resist thermal loading and retain a stable cutting edge. For workshops that face recurring challenges with rostfreier Stahl and high‑temperature alloys, the insert’s WSM20S grade has been developed to reduce built‑up edge and preserve surface integrity. The triangular 60° geometry ensures three usable cutting edges per insert, while the 0.4 mm corner radius gives a compromise between edge strength and profile accuracy. In practice this means fewer insert changes and more consistent component quality during series production. Controlled chip formation and consistent process security The integrated FM5 chipbreaker is designed for reliable chip control across a range of cutting conditions, minimising tangling and enhancing operator safety. A negative rake of 0° (negative) increases margin strength for interrupted cuts and heavy cross‑section removal, supporting steady cutting forces and predictable tool life. For customers with limited metrology on the shop floor, this equates to fewer rejects and a lower risk of unplanned stoppages, contributing to improved overall equipment effectiveness. Machining benefits and explanation for non‑specialists Coated carbide means a hard substrate with a thin protective layer that reduces friction and improves wear resistance; the Tiger·tec Silver coating specifically helps at elevated temperatures typical when turning rostfreier Stahl and superalloys. The chipbreaker geometry moderates chip shape and evacuation; in simple terms, it prevents long, stringy swarf and facilitates consistent surface finish. The triangular shape provides economical indexability, offering three edges per insert and keeping replacement costs predictable. Application guidance and workshop integration The insert is suitable for a wide set of turning operations, from general facing to heavy roughing in challenging materials. Tooling systems compatible with TNMG‑style inserts will accommodate the TNMG160404‑FM5 WSM20S without special adaptation; clamping and seat conformity remain the key factors for repeatable results. For production environments seeking to raise throughput while maintaining component accuracy, the combination of a robust geometry and the WSM20S grade supports extended runs with fewer interventions. Consider pairing the insert with stable holders and appropriate cutting data for maximal benefit. Contact Metav Werkzeuge to discuss suitable holders, cutting data and application trials for the TNMG160404‑FM5 WSM20S from Walter Tools — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TNMG160404-FM5-WSM20S-WALTER Description: Drehwendeschneidplatte TNMG160404-FM5 WSM20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Core data Size: 16 mm Thickness: 4.0 mm Corner radius: 0.4 mm Free angle: 0° (negative) Geometry: Triangle 60° Tolerance class: M Special features Grade: WSM20S (coated carbide) Chipbreaker: FM5 Material suitability: rostfreier Stahl (M), heat‑resistant superalloys / Titanium (S) Designation: TNMG160404-FM5 Typical use: Heavy turning and interrupted cuts FAQ What materials is this insert intended for? The TNMG160404‑FM5 WSM20S is formulated primarily for machining rostfreier Stahl and heat‑resistant superalloys (material groups M and S), using the Tiger·tec Silver coating to improve thermal stability. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker on the TNMG160404‑FM5 promotes short, controllable chips and consistent chip flow, which improves surface finish and reduces the risk of chip entanglement during turning operations. Can this insert be used for interrupted cuts? Yes. The negative 0° rake and the 0.4 mm corner radius make the insert robust for interrupted cuts and operations with fluctuating engagement, enhancing edge stability. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting edges per insert; indexing restores a fresh cutting edge quickly and economically. Is the TNMG160404‑FM5 WSM20S suitable for finishing operations? While optimised for tough materials and general turning, the grade and geometry can achieve acceptable finishes; for fine finishing, a smaller corner radius or a different grade may be preferable depending on the application. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TNMG160404-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of precise finishing, stable chip control and robust edge strength from the cermet grade; combine the WEP10C cutting material with the FP5 chipbreaker and the triangular 60° geometry for consistent production results. Order the insert directly via Metav Werkzeuge or consult the advisers for the product matrix and cutting-parameter recommendations. TNMG160404-FP5 WEP10C indexable turning insert — Walter Tools, cermet grade with FP5 chipbreaker The TNMG160404-FP5 WEP10C is a triangular 60° indexable turning insert in the Walter Cermet series, designed for precision finishing and stable chip control in turning applications. Cermet grade WEP10C for fine finishing FP5 chipbreaker for stable chip control Triangle 60° insert, 16 mm inscribed circle 0° negative rake for heavy cuts Predictable surface quality through cermet technology and chip control The WEP10C grade is a cermet cutting material developed for consistent finishing results where dimensional accuracy and surface integrity are priorities. Combined with the FP5 chipbreaker, the insert promotes controlled chip formation and evacuation, which reduces recutting and vibration. This results in a measurable improvement in surface finish and helps maintain repeatable component tolerances in batch production. The design is particularly beneficial where fine turning and stable cutting conditions are required. Robust geometry for productive turning cycles The 0° negative rake and triangle 60° profile deliver a robust cutting edge that tolerates interrupted cuts and moderate machining forces. The insert features a 16 mm inscribed circle and a 4 mm thickness, offering a stable mounting seat that contributes to cycle-to-cycle repeatability. The tolerance class M ensures consistent dimensional conformity across batches, supporting efficient tool management and predictable tool life in high-throughput environments. Application guidance and compatibility notes for planners The cutting-material suitability must be verified in the manufacturer’s product matrix, as the material entry is catalogue-dependent; the Walter Cermet series provides a range of cermet grades for different finishing tasks. The FN5 chipbreaker and the 0.4 mm corner radius are tuned for finishing with emphasis on surface integrity and chip control rather than heavy stock removal. For unattended or automated turning operations, inspection of the product matrix and tuning of feed and speed are recommended to achieve optimal tool life and process stability. For precision finishing with Walter Cermet inserts, contact Metav Werkzeuge for the detailed product matrix, recommended cutting parameters and procurement support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG160404-FP5-WEP10C-WALTER Designation: TNMG160404-FP5 WEP10C Brand: Walter Tools Series: Walter Cermet Facts Inscribed circle: 16 mm Thickness: 4 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Insert form: Triangle 60° Tolerance class: M Special features Chipbreaker: FP5 Grade: WEP10C (cermet cutting material) Execution: G Basic designation: TNMG160404-FP5 Material specification: catalogue-dependent (see product matrix) FAQ What types of machining benefit most from this insert? The WEP10C cermet grade with the FP5 chipbreaker suits precision finishing and applications where controlled chip formation and a high-quality surface are required; check the product matrix for specific workpiece-material recommendations for the TNMG160404-FP5 WEP10C insert. How does the FP5 chipbreaker influence performance? The FP5 chipbreaker promotes stable chip control and predictable chip flow, reducing the risk of chip-related interruptions and contributing to an improved surface finish when using the TNMG160404-FP5 WEP10C insert. What does the 0° (negative) relief angle mean in practice? A 0° negative relief increases the mechanical strength of the cutting edge and improves resistance to edge chipping under heavier engagement; the TNMG160404-FP5 WEP10C benefits from this where robustness is needed. How many indexable cutting edges are available per insert? The triangular 60° form typically provides three indexable cutting edges; the TNMG160404-FP5 WEP10C can be rotated to use the available edges, extending service life. Is the insert compatible with standard TNMG16 toolholders? The designation indicates compatibility with toolholders designed for TNMG inserts with a 16 mm inscribed circle; verify holder fit and clamping conditions before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, brand-new merchandise from the manufacturer. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com