TCMT16T312-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a reliable RP4 chipbreaker and a compact triangular geometry to secure stable productivity in steel turning and boring operations. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TCMT16T312-RP4 WPP30G turning and boring indexable insert by Walter Tools, optimised for steel The TCMT16T312-RP4 WPP30G is a triangular indexable insert designed for turning and boring applications, offering robust wear resistance and consistent chip formation in steel machining. Tiger·tec Gold coated grade WPP30G Triangular 60° insert, 1.2 mm corner radius RP4 chipbreaker for reliable chip control Optimised for steel machining, T3 thickness Predictable cutting performance through advanced coating technology The combination of a Tiger·tec Gold coating and the WPP30G coated-carbide grade provides enhanced heat resistance and stable flank wear progression under the thermal loads typical of steel machining. This results in longer tool life and fewer index changes during production, which improves overall process efficiency. The textural benefits of the coating reduce adhesion and thermal softening; in practice this translates to consistent dimensional results and lower tooling costs per component. Stable chips and improved surface quality with optimised geometry The triangular 60° format with a 1.2 mm corner radius and a 7° clearance angle creates a stiff cutting edge that supports repeatable surface finishes on turned parts. The RP4 chipbreaker is tuned to evacuate swarf reliably during continuous cuts, reducing the risk of re-cutting and machine interruptions. For operators and process engineers, this means fewer secondary operations and a more predictable finishing step, especially in long-run production where chip behaviour directly affects cycle time. Integration into existing tool systems for efficient production The insert's designation (TCMT16T312-RP4) and T3 thickness make it compatible with a broad range of standard toolholders, permitting straightforward integration into established tool sets. Using this insert can lower setup complexity and machine downtime through straightforward replacement and repeatable clamping. The combination of geometry, chip control and coating supports cost-effective machining strategies for medium to heavy cuts in steel, helping to maintain throughput without compromising component quality. Contact Metav Werkzeuge for availability and application recommendations for Walter Tools inserts such as the WPP30G grade; the Metav team is ready to provide technical guidance and delivery options. Technical data Article number: TCMT16T312-RP4-WPP30G-WALTER Product type: Turning and boring indexable insert Grade: WPP30G Series: Tiger·tec Gold Facts Insert size: 16 Corner radius: 1.2 mm Clearance angle: 7° Shape: Triangular 60° Thickness: T3 Special features Chipbreaker: RP4 Coated carbide grade Material group: P (steel) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TCMT16T312-RP4 WPP30G insert is designed primarily for steel (material group P) and performs well on unalloyed and alloyed steels thanks to its WPP30G grade. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this Walter Tools insert controls chip formation for consistent evacuation, reducing the likelihood of entanglement and improving surface quality during continuous turning operations. Can the insert be used in standard toolholders? Yes. The TCMT16T312-RP4 format with T3 thickness is compatible with many standard turning and boring toolholders, enabling easy replacement and predictable clamping. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases heat resistance and reduces adhesive wear, which extends tool life and helps maintain dimensional accuracy during prolonged cuts in steel. Is the 1.2 mm corner radius suitable for finishing? A 1.2 mm corner radius provides a balance between edge strength and surface finish; it is suitable for semi-finishing and roughing where a robust edge is required. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer Walter Tools.
TCMT220408-MM4 WSM20S T Wendeplatten - Walter Tools
Combine the thermal resilience of the Tiger‑tec Silver coating with the WSM20S grade and a 0.8 mm corner radius to achieve stable cutting edges and reliable chip control when machining stainless steels and high‑temperature alloys. Order the TCMT220408‑MM4 WSM20S insert directly via Metav Werkzeuge or request application advice from the technical team. TCMT220408‑MM4 WSM20S — Triangle 60° turning and boring indexable insert, Tiger‑tec Silver, Walter Tools A TCMT220408‑MM4 WSM20S triangle 60° indexable insert designed for turning and boring operations, optimised for stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for thermal resistance Grade WSM20S for stainless steel and superalloys Triangle 60° form with 0.8 mm corner radius 7° relief and MM4 chipbreaker for stable chips Consistent performance on stainless steels and superalloys The insert delivers predictable behaviour when machining difficult‑to‑cut materials thanks to the combination of the WSM20S grade and the Tiger‑tec Silver coating. The grade is formulated to support secure chip formation and a durable cutting edge in materials that tend to work‑harden or generate heat, such as stainless steels and superalloys. This results in lower scrap rates and more consistent component tolerances, which directly supports uptime and repeatable batch quality. Geometry that stabilises cutting and extends edge life A triangle 60° form with a 0.8 mm corner radius and 7° relief ensures mechanical strength at the cutting zone and reliable engagement in interrupted cuts. The MM4 chipbreaker is tuned to produce short, controllable chips under a wide range of cutting conditions, reducing the risk of entanglement and easing chip evacuation. Together, these geometric features reduce the likelihood of edge chipping and extend the effective tool life, leading to fewer insert changes and smoother machining cycles. Process reliability and productivity benefits The coated indexable insert supports stable machining under elevated temperatures and higher cutting speeds, thanks to the thermal performance of the Tiger‑tec Silver surface technology. Stable edges and improved heat resistance contribute to longer tool life and predictable wear patterns, which simplifies process planning and minimises unplanned interventions. For production environments, this translates into higher component throughput and a more efficient use of machine time. Practical application guidance for production use The insert is supplied in the common TCMT220408 format and fits standard toolholders for triangle inserts; the dimensional coding supports fast identification and replacement in tooling systems. The product is suitable for turning and certain boring operations where a robust cutting edge and reliable chip control are required. For integration into tooling setups, select compatible holders rated for indexable triangle inserts and verify cutting data against the workpiece material and machine capability before commencing production. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts and to discuss suitable cutting parameters for specific stainless steel or superalloy applications — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT220408-MM4-WSM20S-WALTER Designation: TCMT220408-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Inscribed circle: 22 Corner radius: 0.8 mm Relief angle: 7° Thickness code: 04 Special features Grade: WSM20S Chipbreaker: MM4 Form: Triangle 60° Coating: Tiger‑tec Silver Application: stainless steels (M), superalloys/titanium (S) Execution: T Tolerance class: M FAQ What materials is this insert best suited for? The TCMT220408‑MM4 WSM20S insert is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys or titanium alloys (ISO group S), where thermal resistance and stable chip control are required. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal resistance and wear protection, allowing higher cutting speeds and more consistent edge life when the insert machines demanding materials. Which chipbreaker is fitted and what benefit does it provide? The insert features the MM4 chipbreaker, which produces short, manageable chips across a range of cutting conditions, improving chip evacuation and operator safety. What are the key dimensional identifiers for ordering and tool setup? Order or reference the SKU TCMT220408‑MM4‑WSM20S‑WALTER; the insert has a 22 inscribed circle, a 0.8 mm corner radius and a triangle 60° form—these dimensions determine compatible toolholders and clamping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
TCMT220408-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coating and the WPP20G grade for productive steel turning, combining durable wear resistance with consistent chip control; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TCMT220408-MP4 WPP20G — turning indexable insert (steel) by Walter Tools A TCMT220408-MP4 WPP20G turning insert designed for reliable steel machining with a Tiger·tec Gold coated grade, MP4 chip control and triangle 60° geometry for versatile turning operations Tiger·tec Gold coating for improved tool life Grade WPP20G optimised for steel machining Triangle 60° insert with 0.8 mm corner radius MP4 chipbreaker for reliable chip control Consistent cutting performance for steel applications The Tiger·tec Gold coating combined with the WPP20G grade is formulated specifically for P‑group materials, meaning it is optimised for unalloyed and alloyed steel. This results in stable chip formation and reduced flank wear under typical steel turning temperatures. For production environments this translates into fewer indexings per workpiece and more predictable tool life, improving overall machining efficiency. The coating also helps to resist built‑up edge and maintain performance across varied cutting conditions. Geometry designed for repeatability and surface quality The triangular 60° shape and 0.8 mm corner radius provide a balance between strength and surface finish. The 7° relief angle reduces rubbing and heat generation at the cutting edge, while the tolerance class M supports consistent seating in toolholders for repeatable results. These geometry choices enhance process stability and make this insert suitable for a wide range of turning operations where dimensional consistency and good surface integrity are required. Chip control that keeps machines productive The integrated MP4 chipbreaker is engineered to produce controlled, short chips in turning of steel grades, minimising the risk of entanglement and improving swarf evacuation. Reliable chip formation reduces secondary operations such as manual chip clearing and lowers the likelihood of machine stoppages, supporting higher uptime and a steadier machining flow. For operations seeking measurable gains in productivity, the chip control is a practical contributor to reduced cycle times. Practical mounting and grade clarity for workshop use Identified as a TCMT220408-MP4 insert, the format aligns with common turning toolholder systems, enabling straightforward replacement and stock keeping. The grade designation WPP20G signals a coated cemented carbide tailored to steel applications and is part of the Tiger·tec Gold series; this clarity simplifies grade selection for production planners. The insert’s design encourages short changeover times and predictable inventory management, aiding continuous production planning. Contact Metav Werkzeuge for tailored advice on integrating this Walter Tools insert into existing tooling setups or for application-specific recommendations — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 Technical Data Article number: TCMT220408-MP4-WPP20G-WALTER SKU: TCMT220408-MP4-WPP20G-WALTER Product type: Turning indexable insert Designation: TCMT220408-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Relief angle: 7° Corner radius: 0.8 mm Shape: Triangle 60° Size: 22 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold (coated cemented carbide) Chipbreaker: MP4 Material application: Steel (P group) Execution: T Series description: WPP20G — coated carbide for steel FAQ What materials is this insert intended for? The TCMT220408-MP4 WPP20G is specified for P‑group materials, meaning it is optimised for machining various steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP20G grade enhances wear resistance and thermal stability, helping the insert deliver longer, more consistent tool life in steel turning. What does the MP4 chipbreaker provide? The MP4 chipbreaker promotes controlled short chips during turning, improving swarf control and reducing interruptions on the machine tool. Is the geometry suitable for finishing cuts? The 60° triangle and 0.8 mm corner radius offer a compromise between edge strength and finish; the insert can be used for a range of finishing and medium turning tasks in steel. Which designation identifies the insert for ordering? Order as TCMT220408-MP4 WPP20G (Walter Tools) to ensure the correct grade and chipbreaker combination. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is part of the Walter AG group. Protected trademarks and trade names belong to their respective owners. The mentioned brand names are used for identification and descriptive purposes only and do not imply any affiliation.
TCMW110204-RK6 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKK10S grade for abrasive cast-iron applications; this insert delivers stable chip formation and long edge life while maintaining process reliability. Order genuine Walter Tools inserts through Metav Werkzeuge or request application advice from their consultants. TCMW110204-RK6 WKK10S – Triangular turning insert with RK6 chipbreaker by Walter Tools The TCMW110204-RK6 WKK10S is a triangular 60° turning insert designed for productive machining of cast iron, featuring a Tiger·tec Silver coated carbide grade and an RK6 chipbreaker for controlled chips. Tiger·tec Silver coated grade WKK10S Optimised for cast iron machining Triangle 60° form with 0.4 mm radius RK6 chipbreaker for controlled chips Increased productivity for abrasive cast-iron turning The coated-carbide grade WKK10S, part of the Tiger·tec Silver series, is formulated to resist abrasive wear typical of cast-iron workpieces. This property reduces flank and crater wear, extending cutting edge life and increasing uninterrupted runtime in series production. The combination of the coating technology and the chip control geometry means fewer insert changes and less machine downtime, which translates directly into improved throughput and lower unit production costs—advantages particularly valuable in high-volume and industrial turning operations. Stable cutting edge and consistent surface quality The triangular 60° geometry and a 0.4 mm corner radius deliver a robust cutting edge that maintains profile accuracy even under interrupted cuts. The RK6 chipbreaker ensures short, repeatable chips that clear reliably from the cutting zone, reducing the risk of built-up edge and improving surface finish. A relief angle of 7° supports stable cutting forces and predictable performance across varied cast-iron grades, helping to safeguard both toolholder and component tolerances during longer production runs. Simple integration and process reliability Designated as tolerance class M and supplied in the industry-standard insert format, the TCMW110204-RK6 fits common toolholder systems for turning and boring operations, enabling straightforward retrofit into existing setups. The coated carbide construction and the grade’s tuning for cast iron result in consistent chip formation and extended tool life, which supports reproducible process windows and predictable maintenance intervals. For application-specific parameters and clamping recommendations, Metav Werkzeuge provides technical documentation and product matching for tool systems. Contact Metav Werkzeuge for tailored application advice and secure original Walter Tools inserts with Tiger·tec Silver grade — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TCMW110204-RK6-WKK10S-WALTER Designation: TCMW110204-RK6 WKK10S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 2.0 mm Special features Grade: WKK10S Series: Tiger·tec Silver Chipbreaker: RK6 Material group: K (cast iron) Tolerance class: M Execution: W FAQ What materials is this insert suitable for? The TCMW110204-RK6 WKK10S is optimised for cast iron machining and is designed to handle abrasive wear and short, breaking chips typical of these materials. Which chip behaviour can be expected with the RK6 chipbreaker? The RK6 chipbreaker produces controlled, short chips to promote safe chip evacuation and consistent surface quality during interrupted or continuous turning operations. What advantage does the Tiger·tec Silver series provide? Tiger·tec Silver coating improves wear resistance and thermal stability, extending tool life and maintaining cutting-edge integrity under the loading conditions commonly encountered when turning cast iron. Is the insert compatible with standard triangular toolholders? The insert follows industry-standard triangular geometry (60°) and tolerance class M, allowing integration with common toolholder systems for turning and boring. What distinguishes the WKK10S grade from general-purpose grades? WKK10S is a Walter-specific, coated carbide grade tuned for abrasive cast-iron applications, prioritising stable chip formation and reliable edge life under typical cast-iron cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only and indicate no affiliation between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
TCMW110204-RK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance and reliable chip control to maintain consistent productivity when machining cast iron. The coated carbide grade and RK6 chipbreaker ensure economical edge life and stable chip formation. Order directly via Metav Werkzeuge or consult their technical team for application-specific guidance. TCMW110204-RK6 WKK20S indexable insert for cast iron machining – Walter Tools TCMW110204-RK6 WKK20S is an indexable insert designed for machining cast iron components in drilling, boring and turning applications, offering a robust chip control system and a coating optimised for abrasive cast iron grades. Tiger·tec Silver coating for improved wear resistance Optimised for cast iron machining RK6 chipbreaker for controlled chip formation 60° triangular insert with 0.4 mm corner radius Consistent chip control reduces downtime and extends edge life The combination of the WKK20S coated carbide grade and the RK6 chipbreaker is tailored to the typical, often short and brittle chips produced when machining cast iron. This pairing reduces abrasive wear and supports stable chip formation, which in turn lowers the frequency of edge changes and machine stops. The coating technology contributes directly to longer tool life and consistent edge performance, making the insert a cost-effective choice for repetitive production where process stability is critical. Geometry that balances strength and surface quality A 60° triangular shape provides three usable cutting edges per insert, increasing economy of use while the 0.4 mm corner radius balances edge strength with achievable surface finish. The moderate 7° clearance angle promotes secure engagement in interrupted cuts and cast-iron slots, while the thickness designation supports a stable seating in the holder. These geometric choices mean fewer insert changes and predictable cutting behaviour under typical cast-iron cutting conditions. Designed for reliable integration into indexable systems The insert is supplied in the Tiger·tec Silver series and is compatible with standard indexable insert tooling concepts that accept the TCMW family designation. Its graded performance is focused on abrasive materials and applications demanding repeatable results rather than experimental high-speed optimisation. With a focus on process reliability and straightforward edge management, this insert suits production environments where consistent output and predictable tool life are priorities. For tailored advice on integrating the Walter Tools Tiger·tec Silver TCMW110204-RK6 WKK20S insert into specific machines or production lines, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data SKU: TCMW110204-RK6-WKK20S-WALTER Designation: TCMW110204-RK6 WKK20S Series: Tiger·tec Silver Sort: WKK20S Manufacturer: Walter Tools Core specifications Insert size: 11 Shape: Triangle 60° Clearance angle: 7° Corner radius: 0.4 mm Thickness code: 02 Tolerance class: M Applications & features Coating / grade: Tiger·tec Silver (coated carbide) Chipbreaker: RK6 Material applicability: Cast iron Execution: W Applicable standard designation: TCMW110204-RK6 WKK20S FAQ Is this insert suitable for cast iron only? The TCMW110204-RK6 WKK20S insert and its Tiger·tec Silver grade are specifically optimised for cast iron machining, addressing abrasive wear and the typical chip forms of that material. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker on the TCMW110204-RK6 WKK20S promotes controlled chip formation for safer evacuation and reduced risk of built-up edge when cutting cast iron. Can the triangular shape be rotated for extra edges? The 60° triangular form of this insert provides multiple cutting edges; rotating the insert between changes helps extend the usable life of the indexable system. What benefits does the Tiger·tec Silver coating deliver? The Tiger·tec Silver coating on the TCMW110204-RK6 WKK20S improves resistance to abrasive wear common in cast-iron machining and supports consistent edge life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer Walter Tools.
TCMW110208-RK6 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise chip control and a geometry optimised for cast iron to maximise machining uptime; secure reliable, repeatable results by sourcing the insert through Metav Werkzeuge or request application advice from our consultants. TCMW110208-RK6 WKK10S — Triangle 60° Indexable Insert (RK6, 0.8 mm r) by Walter Tools A TCMW110208-RK6 WKK10S indexable insert engineered for productive turning and boring of cast iron components in industrial machining. Tiger·tec Silver coating grade WKK10S for cast iron Triangle 60° form with 0.8 mm corner radius RK6 chipbreaker for controlled chip formation 7° clearance angle for stable cutting performance Productivity gains when machining cast iron The combination of the Tiger·tec Silver coating and the WKK10S grade targets the abrasive wear and the typical short, brittle chips found in cast iron. This results in a measurable improvement in tool life and process stability, allowing for longer uninterrupted cycles and fewer insert changes. For production environments where consistent throughput is essential, the coated carbide composition offers a cost-efficient balance between robustness and cutting performance, reducing downtime related to insert exchange. Consistent precision and extended tool life A deliberately low relief angle of 7° and a 0.8 mm corner radius deliver reliable cutting engagement while preserving edge strength on interrupted or unstable cuts. The geometry reduces the risk of edge chipping and helps maintain dimensional accuracy over longer runs. Where component tolerances and surface quality are critical, this insert’s design supports repeatable results and diminished rework, translating to improved process economics. Reliable chip control and flexible geometry The RK6 chipbreaker is tuned for controlled chip formation in brittle materials, reducing the chance of entanglement and improving evacuation in through-tool and external machining. The triangle 60° shape provides multiple effective indexing positions, enabling quick rotation to a fresh cutting edge and efficient tool utilisation. Together, these characteristics support safer, cleaner machining and a reduction in manual intervention between passes. Practical integration and expert support Manufactured by Walter Tools, this indexable insert suits serial production and job-shop applications that prioritise predictable performance on cast iron. The insert is compatible with standard turning and boring toolholders that accept triangular inserts of its designation. If further technical data or machining parameter recommendations are required, Metav Werkzeuge provides application support and can advise on optimal feeds, speeds and clamping practices — contact details are provided below for prompt assistance. Contact Metav Werkzeuge for tailored advice on Walter Tools' Tiger·tec Silver grade and to source the TCMW110208-RK6 WKK10S insert for cast iron applications Technical Data Article number: TCMW110208-RK6-WKK10S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMW110208-RK6 WKK10S Walter Tools Series: Tiger-tec Silver Grade: WKK10S Manufacturer: Walter Tools ISO designation: TCMW110208-RK6 WKK10S Core data Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 11 Special features Coated carbide grade RK6 chipbreaker Optimised for cast iron machining Stable edge for interrupted cuts FAQ What materials is this insert designed for? The WKK10S grade and Tiger·tec Silver technology are optimised for cast iron, making the TCMW110208-RK6 WKK10S insert particularly suitable for abrasive, brittle-chip materials. How does the RK6 chipbreaker benefit machining? The RK6 chipbreaker promotes controlled chip formation and evacuation during turning and boring, improving process safety and reducing manual chip management with Walter Tools inserts. What does the triangle 60° form offer in practice? A triangle 60° insert offers multiple indexing positions for rapid rotation to a fresh edge, increasing usable cutting edges and reducing downtime for the TCMW110208-RK6 WKK10S insert. Are there recommendations for cutting parameters? Metav Werkzeuge can provide cutting speed and feed recommendations tailored to the TCMW110208-RK6 WKK10S insert and the specific cast iron grade being machined. Is the edge geometry suitable for interrupted cuts? Yes, the combination of a 0.8 mm corner radius and a 7° clearance angle provides enhanced edge strength suitable for interrupted or unstable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
TCMW110208-RK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKK20S grade for stable, wear‑resistant performance in cast‑iron machining; the combination of a RK6 chipbreaker and a 60° triangular form reduces downtime through reliable chip control. Order directly via Metav Werkzeuge or consult the sales team for application support. TCMW110208‑RK6 WKK20S — indexable turning/boring insert, Tiger·tec Silver, for cast iron, Walter Tools TCMW110208‑RK6 WKK20S is a coated carbide indexable insert designed for machining cast iron with optimised chip control and reliable edge performance TCMW110208‑RK6 WKK20S by Walter Tools Tiger·tec Silver coating for wear resistance Optimised for cast iron machining Triangle 60°, 7° relief, 0.8 mm nose radius Extended tool life through a hard, coated grade The WKK20S grade, part of the Tiger·tec Silver series, is a coated carbide formulation developed specifically for abrasive cast‑iron applications. Its composition and coating reduce flank and crater wear when turning cast materials, which commonly produce short, brittle chips. As a result, tools last longer and require fewer interruptions for changeovers, increasing overall throughput. The coated surface also improves heat resistance during sustained cutting, supporting consistent cutting parameters and predictable edge life. Geometry engineered for consistent surfaces and chip control A 60° triangular shape with a 0.8 mm nose radius and 7° relief creates a balance between strength and finish: the nose radius helps achieve a reliable surface quality while the relief angle reduces rubbing on the flank, lowering heat generation. The integrated RK6 chipbreaker produces short, controlled chips when machining cast iron, easing chip evacuation and protecting the workpiece and toolholder from entanglement. These geometric choices translate directly into repeatable component quality and fewer rejects. Stable process capability and predictable production rhythm Manufactured to tolerance class M, the insert offers consistent seat and location accuracy for reliable toolholder fitment. The coated grade and chipbreaker combination support a stable cutting edge, reducing the frequency of unscheduled interventions. For production environments where reproducibility and uptime matter, this insert contributes to a measurable improvement in process stability and overall productivity, particularly on abrasive cast‑iron workpieces (material group K). Practical integration into machining setups As an indexable insert, the design allows multiple cutting edges to be used sequentially, which is cost‑effective in high‑volume operations. The triangular 60° form provides three usable edges per insert, and the RK6 chipbreaker is suited to interrupted and continuous cast‑iron cuts. Installation requires a compatible toolholder for the TCMW geometry; matching the insert to the correct seat and clamping torque guarantees the expected performance. For tailored recommendations on toolholders and cutting data, Metav Werkzeuge can provide application guidance. For reliable cast‑iron machining with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for technical advice and ordering information at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMW110208‑RK6‑WKK20S‑WALTER Manufacturer: Walter Tools Product type: Indexable turning/boring insert Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: RK6 Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: M Special features Coated carbide grade WKK20S (Tiger·tec Silver) Optimised for cast iron (K) Short‑chip RK6 geometry 3 cutting edges per triangular insert Stable, wear‑resistant coating for abrasive materials FAQ Which workpieces is this insert intended for? The TCMW110208‑RK6 WKK20S insert is optimised for cast iron (material group K); the WKK20S grade and RK6 chipbreaker are tailored to the abrasive nature and short‑chip behaviour of cast components. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker produces short, broken chips on cast iron, improving chip evacuation and reducing the risk of chip‑related damage to the workpiece and toolholder when using the TCMW110208‑RK6 WKK20S insert. What role does the 0.8 mm nose radius play? A 0.8 mm nose radius offers a compromise between strength and surface finish: it contributes to a consistent workpiece finish while maintaining sufficient edge strength for stable cutting with the coated grade. Can the insert be indexed to use multiple edges? Yes — the triangular 60° form provides three usable cutting edges, allowing economical re‑indexing of the TCMW110208‑RK6 WKK20S insert before replacement. What does tolerance class M mean for tool mounting? Tolerance class M indicates a consistent dimensional and positional tolerance, ensuring repeatable seating in compatible toolholders and predictable cutting behaviour for production setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TCMW16T304-RK6 WKK10S W - Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and the WKK10S grade for consistent chip control in cast iron machining; the triangular 60° form with a 0.4 mm corner radius ensures secure seating and reliable edge life. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCMW16T304-RK6 WKK10S Drilling and turning indexable insert, Tiger·tec Silver – Walter Tools the TCMW16T304-RK6 WKK10S is a triangular indexable insert designed for drilling/boring and turning operations in cast iron, optimised for stable chip formation and prolonged edge life Tiger·tec Silver coating for improved wear resistance RK6 chipbreaker for controlled chip formation Triangle 60° for secure insert clamping 0.4 mm corner radius for consistent edge strength Engineered for high productivity in cast iron components The TCMW16T304-RK6 WKK10S grade combines Tiger·tec Silver coating with a wear-resistant WKK10S substrate to address the abrasive nature of cast iron workpieces. This combination reduces flank wear and extends effective edge life, which translates into fewer insert changes and improved machine uptime. The result is a measurable boost in process efficiency, especially in serial production where predictable tool life reduces downtime and handling. Precise chip control and improved surface consistency The integrated RK6 chipbreaker is shaped to promote short, consistent chips when machining cast iron, avoiding long swarf that can interrupt automated processes. The triangle 60° shape provides stable seating in common toolholders, while the 0.4 mm corner radius supports edge robustness and contributes to a reproducible surface finish. The 7° clearance angle reduces rubbing and helps maintain consistent cutting forces—key factors for controlled machining and repeatable results. Stable clamping and multi-operation suitability With a compact plate size of 16 mm and thickness T3, this insert is suitable for confined setups where rigidity is essential. The design addresses both drilling/boring and turning contexts without compromising stability: the triangular form facilitates easy indexation and replacement, while the coated carbide substrate sustains performance under intermittent cutting loads. The insert’s tolerance class M supports accurate seating and interchangeability in standard tool systems. Integration into the production workflow and support The Tiger·tec Silver series is engineered for broad applicability within cast iron machining, reducing the need for multiple specialised grades. That practical versatility simplifies tool inventory and planning for production managers. For implementation, Metav Werkzeuge can advise on compatible toolholders and cutting data to match machine power and cycle requirements. Availability of technical guidance ensures the insert contributes to consistent part quality and process reliability. For process-stable machining with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored application advice and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCMW16T304-RK6-WKK10S-WALTER Designation: TCMW16T304-RK6 WKK10S Product type: Drilling/boring and turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Facts Plate size: 16 mm Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Plate form: Triangle 60° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK10S (coated cemented carbide) Chipbreaker: RK6 Suitable for: cast iron (K) Execution: W FAQ What materials is this insert intended for? The insert is formulated for cast iron machining; the WKK10S grade and Tiger·tec Silver coating are tuned for abrasive cast materials. How does the RK6 chipbreaker affect performance? The RK6 chipbreaker produces short, controlled chips in cast iron, improving process stability and reducing the risk of chip entanglement during drilling and turning. Can this insert be used for both drilling and turning? Yes, the geometry and design permit use in drilling/boring and turning applications when mounted in suitable toolholders. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm radius increases edge strength and promotes a consistent surface finish while balancing cutting force and edge durability. Which series does the insert belong to and what is its benefit? Belonging to the Tiger·tec Silver series, the insert offers enhanced wear resistance and longer effective tool life compared with many uncoated alternatives. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TCMW16T304-RK6 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WKK20S carbide grade and an RK6 chipbreaker delivers reliable, wear‑resistant performance for cast iron machining; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TCMW16T304-RK6 WKK20S indexable turning insert – Triangle 60°, Tiger‑tec Silver (Walter Tools) TCMW16T304-RK6 WKK20S is an indexable turning and boring insert engineered for dependable, high‑productivity machining of cast iron components Tiger‑tec Silver coated grade WKK20S Optimised RK6 chipbreaker for cast iron Triangle 60° insert, 0.4 mm corner radius Clearance angle 7° for robust cutting Boosted wear resistance for steady production The combination of the Tiger‑tec Silver technology and the WKK20S coated carbide grade provides enhanced wear resistance tailored to abrasive cast iron applications. This coating technology reduces flank wear and helps maintain a consistent cutting edge life across long runs, which translates into fewer tool changes and higher uptime. Because the grade is formulated specifically for cast iron, the insert sustains cutting performance even under interrupted cuts and discontinuous chip forms typical of grey and nodular cast irons. Controlled chip formation for safer machining The RK6 chipbreaker is optimised for the fracturing and evacuation behaviour of cast iron chips, enabling predictable chip control and reduced risk of built‑up edge formation. Together with the triangle 60° geometry and 0.4 mm corner radius, the design balances edge strength and cutting stability, delivering cleaner surface finishes and minimised vibration. For operations where chip handling and machine cleanliness matter, this insert offers a pragmatic solution that improves operator safety and downstream handling. Designed for practical integration and toolroom efficiency The T3 thickness and 7° clearance angle make the insert straightforward to integrate into standard toolholders for turning and boring. The triangular form provides three indexable cutting edges per insert, lowering tooling costs per edge and simplifying inventory. Selecting this insert reduces setup complexity: fewer changes, predictable wear patterns and consistent tolerances support cycle‑time stability and efficient production planning. Application guidance and selection rationale Intended specifically for cast iron applications, the grade and chipformer combination is most effective in medium to high‑volume finishing and semi‑roughing where surface quality and tool life must be balanced. When choosing inserts, consider feed and depth of cut that match the 0.4 mm corner radius to avoid premature edge overload. For interrupted cuts or rougher cast surfaces, the robust geometry and coated grade help maintain process security and extend the period between regrinds or replacements. Contact Metav Werkzeuge for availability and tailored advice on Walter Tools Tiger‑tec Silver inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMW16T304-RK6-WKK20S-WALTER Description: Indexable turning and boring insert TCMW16T304-RK6 WKK20S (Walter Tools) Manufacturer: Walter Tools Series: Tiger‑tec Silver Core specifications Clearance angle: 7° Edge radius: 0.4 mm Plate size: 16 mm Plate form: triangle 60° Thickness: T3 Tolerance class: M Chipbreaker: RK6 Materials and features Carbide grade: WKK20S (coated carbide, Tiger‑tec Silver) Suitable for: cast iron (K) Geometry: triangle 60° offers three indexable edges Application focus: machining of cast iron components FAQ What materials is this insert designed for? The TCMW16T304-RK6 WKK20S insert from Walter Tools is specifically formulated for machining cast iron (ISO group K) and offers wear resistance suited to abrasive cast materials. How does the RK6 chipbreaker affect performance? The RK6 chipbreaker promotes controlled chip breaking and reliable evacuation when cutting cast iron, improving surface finish and reducing the likelihood of built‑up edge on the insert. Can this insert be used for roughing operations? Yes, the robust triangular geometry and 0.4 mm corner radius make the insert appropriate for light to medium roughing and finishing in cast iron, while maintaining edge stability for interrupted cuts. How many usable edges does the insert provide? The triangle 60° shape yields three indexable cutting edges per insert, which helps to lower tooling costs per edge and simplifies replacement logistics. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new factory goods of the manufacturer. The Walter brand is used for clarification of product origin.
TCMW16T308-RK6 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of a coated-carbide grade optimised for abrasive cast-iron work, combined with a robust RK6 chipbreaker and a compact triangle form for reliable cycle times. Order the TCMW16T308-RK6 WKK10S indexable insert directly via Metav Werkzeuge or consult the specialists if application data are required. TCMW16T308-RK6 WKK10S – indexable insert (triangle 60°, 0.8 mm) by Walter Tools TCMW16T308-RK6 WKK10S is an indexable turning insert designed for efficient machining of cast iron, featuring the Tiger·tec Silver coating technology and an RK6 chipbreaker. Triangle 60° geometry, three cutting edges Tiger·tec Silver coated carbide grade WKK10S RK6 chipbreaker for consistent cast iron chips Consistent performance for cast iron machining The TCMW16T308-RK6 WKK10S insert is specified for abrasive cast-iron applications and benefits from the Tiger·tec Silver coating technology, which delivers enhanced resistance to abrasive wear. The coated-carbide substrate is tailored to handle the short, brittle chips typical of cast iron; this yields stable chip formation and extends tool life compared with uncoated grades. The WKK10S grade combines wear resistance with sufficient toughness to maintain a secure cutting edge under interrupted cuts, supporting higher material removal rates and more predictable tool-change intervals—advantages that contribute directly to reduced production costs and improved machine uptime. Secure geometry to reduce set-up time and improve surface integrity A triangular 60° form gives three usable cutting edges per insert and a compact seating face for secure clamping. The 0.8 mm corner radius offers a balance between edge strength and achievable surface finish: larger radii increase robustness for heavy cuts, while the selected radius here supports general turning and semi-finishing in cast iron. The tolerance class M ensures consistent fit in standard toolholders, reducing rework during set-up and simplifying indexing procedures. For workshops with mixed skill levels, the geometry and nominal dimensions provide predictable behaviour, easing tool selection and repeatability of results. Seamless integration and process reliability Sized as 16 mm with a T3 thickness code and equipped with the RK6 chipbreaker, the insert integrates with common triangular inserts in industry-standard toolholders, enabling quick replacement and minimal inventory complexity. The RK6 chipbreaker is optimised for breaking short chips, improving evacuation and reducing the risk of entanglement on cast-iron swarf; this directly contributes to safer, cleaner machining environments and lower secondary handling. The combination of coated carbide, controlled geometry and a compact form factor supports stable cutting parameters and consistent component quality across production batches. For application support, cutting data and to order genuine Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply. Technical Data Article number: TCMW16T308-RK6-WKK10S-WALTER Name: TCMW16T308-RK6 WKK10S Manufacturer: Walter Tools Facts Free cutting angle: 7° Corner radius: 0.8 mm Insert size: 16 mm Plate form: triangle 60° Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S (coated carbide) Application: cast iron (group K) Chipbreaker: RK6 Design: indexable insert, triangle, three cutting edges FAQ What materials is this insert intended for? This insert is designed primarily for cast iron machining; the WKK10S grade and Tiger·tec Silver coating are tuned for abrasive cast-iron behaviour and short, brittle chips. How many cutting edges are available per insert? The triangular 60° design provides three cutting edges per insert, enabling economical indexing and reduced tool costs over time. What does the RK6 chipbreaker do? The RK6 chipbreaker is engineered to produce short, controllable chips in cast-iron machining, improving chip evacuation and reducing the risk of chip entanglement at the work area. Which dimensions are relevant for holder compatibility? Key dimensions are the insert size (16 mm), the thickness code T3, the triangle 60° form and the 0.8 mm corner radius; these parameters determine compatibility with standard triangular toolholders. Is the coating suitable for interrupted cuts and high abrasion? Yes. The Tiger·tec Silver coated-carbide construction of the WKK10S grade provides abrasion resistance and edge stability suitable for interrupted cuts common in cast-iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world-leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the manufacturers. The offered item is an original, factory-new product of the manufacturer.
TCMW16T308-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip formation and a compact triangular geometry for reliable cast iron machining; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCMW16T308-RK6 WKK20S — Triangle 60° Insert for Cast Iron, Walter Tools TCMW16T308-RK6 WKK20S is a coated carbide turning and drilling insert designed for productive machining of cast iron components. Tiger·tec Silver coated carbide grade Optimised for cast iron machining Triangle 60° for three indexing edges 0.8 mm corner radius for robust cuts Delivering consistent productivity on cast iron The combination of the Tiger·tec Silver coating and a coated carbide substrate is engineered to resist abrasive wear common with cast materials. This results in high wear resistance and longer in-service intervals, reducing tool changes and downtime. The insert’s metallurgical design supports stable chip formation, which is particularly relevant when processing grey or nodular cast iron that tends to produce short, brittle chips. In practical terms, shops benefit from steadier cycle times and improved process reliability. Geometry that boosts cutting efficiency and repeatability A triangle 60° profile provides three usable cutting edges per insert, enabling economical re-indexing and predictable seating in toolholders. The 0.8 mm corner radius increases edge strength for interrupted cuts and moderate depths of cut, while the RK6 chipbreaker is tailored to promote controlled chip breaking on cast iron workpieces. The 7° relief angle aids in reducing friction at the flank, lowering cutting forces and improving surface finish where required. These geometry choices balance edge life with cutting performance for consistent results. Integration into workshop workflows and applications The insert is supplied in T3 thickness and size 16, making it compatible with common toolholder systems for drilling, boring and turning operations that require robust carbide grades. The grade WKK20S from Walter Tools, belonging to the Tiger·tec Silver family, is specifically optimised for cast iron (ISO group K) and supports stable machining across many production scenarios. The insert suits maintenance and production environments that prioritise repeatable indexing, predictable tool life and simplified inventory management. For genuine Walter Tools inserts such as the TCMW16T308-RK6 WKK20S and technical advice tailored to cast iron machining, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability. Technical data Article number: TCMW16T308-RK6-WKK20S-WALTER Designation: TCMW16T308-RK6 WKK20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 16 Thickness: T3 Plate form: Triangle 60° Relief angle: 7° Corner radius: 0.8 mm Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RK6 Execution: W Material application: Cast iron (ISO group K) FAQ What materials is this insert intended for? The insert is optimised for cast iron machining; the WKK20S grade within the Tiger·tec Silver range is tuned for abrasive wear and short, breaking chips typical of cast materials. How many cutting edges does the triangular insert provide? The triangle 60° geometry supplies three indexing edges per insert, enabling economical rotation and repeatability in seating. What benefits does the RK6 chipbreaker offer? The RK6 chipbreaker promotes controlled chip breaking on cast iron, supporting consistent chip evacuation and reduced risk of clogging. Is the TCMW16T308-RK6 WKK20S suitable for interrupted cuts? Yes, the 0.8 mm corner radius and robust grade provide increased edge strength suitable for many interrupted cutting conditions common in cast iron workpieces. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TNGA160404SM-S WCH10C Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature resistance, a robust triangular geometry and a wear‑resistant coated ceramic grade for consistent performance in hard machining; order this insert via Metav Werkzeuge or consult our technical advisors for machining recommendations. TNGA160404SM-S WCH10C indexable turning insert by Walter Tools – for hard machining of hardened steels The TNGA160404SM-S WCH10C is a triangular 60° indexable turning insert developed for high‑temperature, high‑speed turning of hardened steels; its coated ceramic grade and negative rake geometry provide stability in demanding hard‑machining operations Walter CBN series – coated ceramic grade WCH10C For hard machining of hardened steels (ISO H) Triangle 60° insert with 0.4 mm corner radius Negative 0° rake for stable cutting High‑speed, heat‑resistant performance for hardened components The insert’s distinguishing characteristic is its coated ceramic grade, WCH10C, which is engineered for high cutting speeds and thermal stability during extended contact with hard materials. Coated ceramics maintain hardness at elevated temperatures, so the insert sustains cutting edge integrity where conventional carbides would soften. In practice, this means more consistent component tolerances and longer in‑process life for tools used in hard machining of quenched and tempered parts. The combination of material technology and the Walter CBN series philosophy also contributes to predictable wear behaviour and reliable repeatability on production lines. Stable cutting and predictable surface quality through geometry Geometry plays a decisive role in edge strength and chip flow. The triangular 60° shape with a 0.4 mm corner radius increases resistance to mechanical loading and supports controlled engagement in interrupted or heavy cuts. The negative 0° rake increases the effective cutting edge robustness, reducing the tendency for chipping under high contact stresses. The integrated chipbreaker S is designed to promote short, manageable chips during hard turning, improving process safety and helping to preserve workpiece surface finish. Together, these features yield reduced rework rates and steadier cycle times in series production. Practical application guidance for process reliability Designed within the Walter CBN / Hartstoff series, this insert is intended specifically for machining of materials classified under ISO group H (hardened steels) and is suitable for pre‑hardened and hardened components where wear resistance and thermal stability are critical. The insert designation indicates a compact form factor (insert size 16, thickness 04) and a general tolerance class G, which supports consistent clamping and indexing behaviour in standard toolholders. For optimised results, match holder rigidity and cutting parameters to the workpiece hardness and batch size; when in doubt, Metav Werkzeuge’s technical consultants can recommend parameter windows to balance tool life and surface finish. The construction focuses on reproducible outcomes and reduced downtime rather than experimental cutting regimes. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools inserts for hardened steel turning, or ask for a cutting‑data recommendation from our specialists Technical data SKU: TNGA160404SM-S-WCH10C-WALTER Designation: TNGA160404SM-S WCH10C Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Grade: WCH10C Core specifications Insert size: 16 Thickness: 04 Corner radius: 0.4 mm Shape: Triangle 60° Rake angle: 0° (negative) Tolerance class: G Features & application Coated ceramic cutting grade Chipbreaker S Suitable for hardened steels (ISO H) Intended for hard machining / hard turning Stable cutting edge for high thermal loads FAQ Is this insert suitable for hardened steels? The TNGA160404SM-S WCH10C insert from Walter Tools is specifically designed for machining materials in ISO group H and is therefore suitable for hardened steels and hard turning applications. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and reduces risk of chipping under high cutting forces, improving tool life and supporting a consistent surface finish on hardened components. What does the negative 0° rake mean for machining? A negative 0° rake enhances cutting edge robustness and stability during heavy engagement, making the insert advantageous for interrupted cuts and demanding hard‑machining operations. How does the chipbreaker S influence chip formation? The chipbreaker S is tuned to promote short, controlled chips in hard turning, which supports process safety, easier chip evacuation and a more consistent workpiece surface. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGA160404TM-3 WBH10 WBH10 Wendeplatten - Walter Tools
Take advantage of the WBH10 CBN grade and the triangular 60° geometry for consistent hard turning and long tool life; the combination of wear resistance and reliable chip control supports stable production. Order the TNGA160404TM-3 WBH10 turning insert directly via Metav Werkzeuge or consult the technical team for application advice. TNGA160404TM-3 WBH10 indexable turning insert by Walter Tools — CBN grade for hardened steels, triangular 60° TNGA160404TM-3 WBH10 is a triangular 60° indexable turning insert designed for demanding hard machining tasks on hardened steels. CBN grade WBH10 for hardened steels Triangular 60° geometry for versatile cutting 0.4 mm corner radius for stable edge life Negative 0° rake for heavy-duty turning High-performance hard turning with predictable results The combination of a CBN-based WBH10 grade and a triangular insert geometry delivers predictable cutting performance in hard turning operations. The CBN formulation is optimised for severe wear resistance, which translates into longer tool life and reduced tool-change frequency. With a chipbreaker 3 configuration and a defined 0.4 mm corner radius, the insert supports controlled chip formation and consistent surface finishes on hardened workpieces. This results in fewer interruptions on the shop floor and improved process stability. Geometry and cutting geometry that support productivity A triangular 60° shape provides multiple usable cutting edges per insert and versatile approach angles for external turning profiles. The negative 0° rake increases cutting-edge robustness, allowing secure engagement in interrupted cuts and heavy-section turning. Because the insert design favours edge strength and repeatability, manufacturers achieve higher metal removal rates without compromising surface quality, supporting efficiency gains and cost-effectiveness in serial production. Material applicability and machining scope Engineered primarily for hardened steels, the insert’s CBN substrate is tailored to withstand elevated temperatures and abrasive contact typical of hard machining. The grade is suitable for prehardened and fully hardened components where standard carbide solutions would wear prematurely. As a result, the insert enables reliable finishing and semi-finishing passes on heat-treated shafts, bearings and similar components, contributing to consistent dimensional control and improved component life. Practical handling and integration into tool systems The insert’s size code and thickness code ensure compatibility with established indexable toolholders in industrial turning centres. The triangular format provides a favourable balance between edge life and indexing economy. Toolroom personnel benefit from straightforward handling, clear identification of grade and geometry, and straightforward replacement procedures that keep downtime to a minimum. When combined with proper cutting data and coolant strategy, the result is dependable, repeatable machining performance. For robust hard-turning applications, request the Walter Tools TNGA160404TM-3 WBH10 via Metav Werkzeuge today; the Metav team can advise on grade selection, clamping and cutting data to match specific production needs — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNGA160404TM-3-WBH10-WALTER SKU: TNGA160404TM-3-WBH10-WALTER Series: Walter CBN / Hartstoff Grade: WBH10 Facts Insert shape: Triangular 60° Size code: 16 Thickness code: 04 Corner radius: 0.4 Rake: 0° (negative) Chipbreaker: 3 Special features CBN cutting material for hard machining Suitable for hardened steels (H) Designed for stable chip control and long edge life Robust geometry for interrupted cuts and heavy cuts FAQ What materials is this insert intended for? The TNGA160404TM-3 WBH10 insert is formulated with the WBH10 CBN grade and is intended primarily for hardened steels and hard-machining tasks. How does the CBN grade affect productivity? The CBN-based WBH10 delivers superior wear resistance and thermal stability, allowing longer tool life and fewer insert changes compared with conventional carbide grades when machining hardened components. What cutting conditions suit a negative 0° rake insert? A negative 0° rake provides a robust cutting edge for heavy-duty turning and interrupted cuts; the insert is therefore well suited to demanding finishing and semi-finishing operations on hardened parts. Is the triangular 60° format advantageous for indexable systems? Yes — the triangular 60° geometry offers multiple cutting edges per insert and versatile approach options, improving edge utilisation and reducing tooling costs in serial production. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGA160404TM-3 WBH10C WBH10C Wendeplatten - Walter Tools
The high wear resistance of this CBN grade, combined with a stable triangular geometry and a precise 0.4 mm corner radius, delivers repeatable performance in hard-turning tasks; order via Metav Werkzeuge or consult our technical team for application support. TNGA160404TM-3 WBH10C indexable turning insert — CBN grade for hard turning (Walter Tools) The TNGA160404TM-3 WBH10C is a triangular 60° indexable turning insert in a coated CBN grade, engineered for hard turning of hardened steels and pre-hardened components. CBN grade WBH10C for hard turning Triangular 60° insert for robust seating 0.4 mm corner radius for stable edge life 0° negative rake for controlled cutting forces High-performance wear resistance for hard materials The coated CBN grade WBH10C provides exceptional wear resistance in operations on hardened steels (ISO group H). As a superabrasive, cubic boron nitride maintains cutting-edge geometry under high thermal and mechanical stress, which reduces flank wear and helps keep tolerances stable over longer tool life. For production environments that demand repeatable batch-to-batch accuracy, this behaviour translates into fewer tool changes and more predictable cycle times. Stable geometry that supports precise turning The triangular 60° form, combined with a 0.4 mm corner radius and a 0° negative rake, gives mechanical strength at the cutting edge and consistent contact conditions in the cut. The three-sided format allows for multiple indexed cutting edges per insert, while the modest corner radius balances edge robustness with the potential for good surface finish. The specified chipbreaker 3 promotes controlled chip formation in hard materials, which reduces risk of built-up edge and contributes to steady machining performance. Optimised for process reliability and productivity Designed within the Walter CBN / Hartstoff series, this insert supports machining strategies where tool life and process security are primary criteria. The combination of a coated CBN substrate and a restrained geometric setup reduces unplanned downtime caused by premature edge failure. For shops producing hardened shafts, bearings or other high-hardness components, the result is a measurable improvement in throughput and fewer interruptions for tool replacement, supporting leaner production flows. Application guidance and practical notes The insert is intended for hard turning of hardened steels and is suitable for pre-hardened workpieces as indicated by the specification. The designation reflects a compact form (size 16) with a robust thickness and a precision corner; matching insert seat and clamping torque are essential to ensure the intended stability. Adjustments to feed and depth of cut should be made within the process window for hard materials, and coolant strategy should follow machine and workpiece requirements. For materials outside the specified groups, tool choice should be reviewed against the workpiece characteristics. For tailored recommendations on cutting data, toolholders and availability of the Walter Tools TNGA160404TM-3 WBH10C, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and fast delivery options Technical data Article number: TNGA160404TM-3-WBH10C-WALTER Label: Drehwendeschneidplatte TNGA160404TM-3 WBH10C Walter Tools Manufacturer: Walter Tools Facts Size: 16 mm Thickness: 4.0 mm Corner radius: 0.4 mm Shape: triangular 60° Rake angle: 0° (negative) Chipbreaker: 3 Tolerance class: G Execution: A Special features Series: Walter CBN / Hartstoff Grade: WBH10C (coated CBN) Material group: H (hardened steels) Suitable for: steel; pre-hardened steel ISO designation: TNGA160404TM-3 WBH10C Designation without grade: TNGA160404TM-3 FAQ Which materials is this insert designed for? This insert is designed primarily for hardened steels and pre-hardened steel applications; the WBH10C CBN grade targets ISO group H for hard turning tasks. What does the designation TNGA160404TM-3 indicate? The designation identifies the insert geometry and size: triangular 60° form with the series and size coding TNGA160404TM-3 and the CBN grade WBH10C indicating its suitability for hard machining. How does CBN compare with carbide for hard turning? CBN provides superior thermal and abrasive wear resistance compared with conventional carbide, making it the preferred option for consistent edge life and dimensional stability when machining high-hardness materials. Is this insert suitable for finishing and semi-finishing? The combination of a 0.4 mm corner radius and a controlled geometry allows the insert to be used for finishing to semi-finishing in hard-turning sequences; achievable surface finish depends on process parameters and machine rigidity. How many cutting edges can be used per insert? The triangular form offers multiple indexable edges per insert; specifics depend on the mounted orientation and the clamping system in the chosen toolholder. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
TNGA160404TM-3 WBH20 WBH20 Wendeplatten - Walter Tools
High wear resistance and a secure cutting edge combine to deliver consistent chip control and predictable performance in hard turning. The CBN WBH20 grade and 60° triangular geometry reduce downtime and extend tool life. Order the TNGA160404TM-3 WBH20 directly via Metav Werkzeuge or consult our application specialists for cutting data and process optimisation. TNGA160404TM-3 WBH20 indexable turning insert — CBN grade for hard turning, Walter Tools A TNGA160404TM-3 WBH20 indexable turning insert engineered for hard and highly wear‑resistant machining tasks, offering a triangular 60° geometry and CBN cutting material for reliable performance in hardened steels. CBN grade WBH20 for hard turning Triangular 60° geometry for versatility 0.4 mm corner radius for fine finishing 0° negative rake for a robust cutting edge Exceptional wear resistance for hardened steels The combination of CBN grade WBH20 and a purpose‑built insert geometry provides significantly improved resistance to abrasive wear when machining hardened steels. CBN is a superabrasive designed for the high contact temperatures and forces typical of hard turning; as a result, the insert maintains a stable cutting edge over extended cycles, reducing the frequency of tool changes and contributing directly to more predictable cycle times and lower process cost per component. Robust geometry that supports stable machining A 60° triangular form with a 0° negative rake delivers mechanical strength at the cutting edge, allowing more secure interruption tolerance and heavier depths of cut where process stability is essential. The 0.4 mm corner radius balances edge strength with surface quality, producing consistent finishes without sacrificing edge life. The insert’s dimensions and chip‑forming features ensure reliable chip control even under demanding conditions, which is crucial for unattended or lights‑out machining strategies. Process benefits and application guidance Designed specifically for hard turning applications, the insert supports efficient material removal from pre‑hardened and hardened steels while preserving dimensional stability. The graded composition prioritises stable chip formation and repeatable results across batches, making it suitable for series production and repair work on hardened components. For best results, pair the insert with compatible turning toolholders and adapt cutting parameters to account for the high thermal loads associated with CBN machining. Contact Metav Werkzeuge today for tailored cutting data and application advice on Walter Tools CBN inserts to optimise hard‑turning processes Technical data Article number: TNGA160404TM-3-WBH20-WALTER Product: Indexable turning insert (Drehwendeschneidplatte) ISO designation: TNGA160404TM-3 WBH20 Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Grade: WBH20 Execution: A Facts Tolerance class: G Free rake: 0° (negative) Corner radius: 0.4 mm Plate size: 16 Plate thickness: 04 Chipbreaker: 3 Plate form: Triangle 60° Special features Cutting material: CBN (superabrasive) Intended for: hardened steels (ISO group H) Suitable for: pre‑hardened and hardened steel machining Stable cutting edge for heavy and interrupted cuts FAQ What materials is this insert designed for? The TNGA160404TM-3 WBH20 insert is designed primarily for hardened steels and is suitable for pre‑hardened and hardened workpieces where CBN performance is required. How does the WBH20 grade improve process stability? WBH20 is a CBN grade formulated for high wear resistance and stable chip control, which helps to maintain a consistent cutting edge and predictable tool life in hard turning operations. What benefits does the 60° triangular form provide? The triangular 60° geometry allows multiple indexed corners, versatile clamping options and a robust edge for heavier depths of cut, improving both flexibility and productivity in turning applications. Is the insert suitable for interrupted cuts? Yes, the 0° negative rake and robust edge geometry make the insert particularly tolerant of interrupted cutting conditions, supporting greater process reliability. Where can tailored cutting data be obtained? Metav Werkzeuge can provide application‑specific cutting data and consulting for the Walter Tools TNGA160404TM-3 WBH20 insert to ensure optimal parameters and performance Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected product names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
TNGA160404TS-3 WBK20 WBK20 Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting material and a stable triangular geometry to achieve reliable machining of hardened components, reduced tool change frequency and consistent surface quality. Order the TNGA160404TS-3 WBK20 directly via Metav Werkzeuge or contact the consultants for application advice. TNGA160404TS-3 WBK20 – Triangular turning insert, CBN grade (Walter Tools) TNGA160404TS-3 WBK20 is a triangular indexable insert designed for high-wear turning tasks, especially in hardened steels and other wear‑intensive materials CBN grade for hardened materials 60° triangular geometry for versatile indexing 0.4 mm corner radius for repeatable edge strength High-performance CBN for wear-intensive turning The insert is manufactured in a CBN cutting material, a choice that targets the machining of hardened steels and other highly abrasive workpieces. This results in improved wear resistance and extended tool life compared with conventional carbide grades, making the component a rational choice where cycle time and reproducible part quality matter. The specification TNGA160404TS-3 WBK20 indicates a robust grade combination developed by Walter Tools for demanding turning operations; users are advised to consult the product matrix to confirm suitability for specific alloys. Geometry and edge design that stabilise the process A 60° triangular form with a 0° negative rake and a 0.4 mm corner radius provides mechanical strength at the cutting edge while enabling multiple indexable positions per insert. The geometry, together with chipbreaker stage 3, supports predictable chip formation and stable cutting forces, which reduces vibration and improves surface finish. For production environments this means fewer interruptions, consistent tolerances and a lower scrap rate — concrete advantages for shops aiming to optimise throughput and quality. Practical benefits for shopfloor productivity By combining a wear-resistant grade with a stable edge and repeatable geometry, the insert offers measurable process security: longer edge life, fewer tool changes and consistent component dimensions. The design is particularly suited to applications where hardened workpieces are common and where process predictability is essential. Technical support and application advice are available to help integrate the insert into existing toolholders and turning cycles, ensuring the chosen setup delivers the intended productivity gains. Contact Metav Werkzeuge to discuss the application of the Walter Tools TNGA160404TS-3 WBK20 for hardened components and to request delivery or stock information Technical data SKU: TNGA160404TS-3-WBK20-WALTER Article designation: TNGA160404TS-3 WBK20 Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Core data Shape: Dreieck 60° Size code: 16 Thickness: 04 Corner radius: 0.4 mm Rake angle: 0° (negativ) Chipbreaker: 3 Tolerance class: G Special features Schneidstoffsorte: WBK20 (CBN) Series: Walter Schneidstoffsorte - Serie offen Suitable for wear-intensive and hardened-steel tasks (check product matrix) Indexable triangular geometry for multiple edges Designed for stable chip formation and consistent edge life FAQ What materials is this insert intended for? The TNGA160404TS-3 WBK20 insert is specified as a CBN grade for hard and wear-intensive materials; suitability for particular alloys should be verified against the product matrix provided by Walter Tools. How does the 60° triangular form affect use? A 60° triangle supplies multiple indexable edges and a compact edge geometry that balances strength and accessibility, making the insert useful for a range of turning operations where repeatable edge position is required. What advantages does the 0.4 mm corner radius deliver? The 0.4 mm radius increases edge robustness, reduces chipping risk under interrupted cuts and supports consistent surface finish across production runs. Is the insert compatible with standard TNGA toolholders? The designation TNGA160404TS-3 indicates the insert format; compatibility with TNGA-style holders is expected — holder choice should follow standard holder-to-insert matching procedures. Does this insert require special cutting data? CBN grades typically demand specific cutting speeds and feeds optimised for hardened materials; machine and process parameters should be adjusted according to the workpiece material and the Walter Tools recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is original and brand new from the manufacturer (Walter Tools).
TNGA160408SM-S WCH10C WCH10C Wendeplatten - Walter Tools
High wear resistance, stable chip control and geometry tuned for hard turning combine to deliver consistent productivity in demanding operations; order the TNGA160408SM-S WCH10C insert directly via Metav Werkzeuge or consult our advisors for process matching. TNGA160408SM-S WCH10C turning insert by Walter Tools — coated ceramic grade for hardened steels, triangular 60° The TNGA160408SM-S WCH10C is a triangular turning insert designed for high-speed, temperature-resistant hard turning of hardened steels in industrial machining environments. Walter CBN / hard-material series grade Coated cutting ceramic for high speeds Triangle 60° geometry for stability Corner radius 0.8 mm for edge strength Boost hard-turning productivity with a ceramic cutting grade The WCH10C grade is a coated cutting ceramic developed for operations that demand high cutting speeds and resistance to elevated cutting temperatures. In practical terms, this means fewer tool changes and more uninterrupted machining time when processing hardened steels, which are classified under ISO group H. Ceramic grades maintain edge integrity at temperatures that would quickly degrade conventional carbides, so cycle times can be shortened without sacrificing component consistency. For production settings where throughput and reliable repeatability matter, this insert delivers measurable efficiency gains. Geometry that secures surface quality and edge life The triangular 60° form and 0° negative rake provide a robust cutting edge that resists chipping under high contact stresses. The corner radius 0.8 mm balances edge strength with achievable surface finish, making the insert suitable for light to medium finishing passes on hardened components. The inscribed circle of 16 mm ensures compatibility with tooling systems designed for TNGA-style inserts, while the thickness code 04 specifies the plate cross-section for clamping stability. Together these geometry choices support consistent form control and reduce the likelihood of workpiece rework. Process security and controlled chip behaviour for hard materials Equipped with chipbreaker type S and a ceramic-based grade, the insert promotes stable chip formation even when machining high-hardness alloys. The material combination enhances wear resistance, so insert life is extended in abrasive hard-turning applications. Because hard materials generate elevated temperatures and cutting forces, the thermal and mechanical stability of the grade reduces dimensional drift and helps maintain repeatable component tolerances over longer tool life cycles. Practical usage notes and integration into production This insert is intended for hard-machining tasks such as finishing and fine turning of pre‑hardened and through‑hardened components. Correct clamping in a compatible toolholder and a rigid machine setup are essential to exploit the grade’s advantages; a stable holder minimises vibration and protects the fragile ceramic edge from shock loads. For process optimisation or selection of suitable toolholder interfaces, Metav Werkzeuge provides application advice and can assist with grade-to-workpiece matching to achieve the expected productivity and surface quality. For hard-turning applications specify the Walter Tools WCH10C grade and contact Metav Werkzeuge for tailored technical advice — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TNGA160408SM-S-WCH10C-WALTER Designation: TNGA160408SM-S WCH10C Product type: Turning insert Manufacturer: Walter Tools Series: Walter CBN / hard material Core data Inscribed circle: 16 mm Corner radius: 0.8 mm Thickness code: 04 Free rake: 0° (negative) Shape: Triangle 60° Chipbreaker: S Special features Grade: WCH10C (coated cutting ceramic) Suitable for: Hardened steels (ISO H) Application: Hard machining / hard turning Tolerance class: G Execution: A FAQ Which materials is this insert suitable for? This insert is designed for machining hardened steels (ISO H); the WCH10C grade and the Walter CBN / hard‑material series are optimised for high‑hardness applications. What are the key geometric features of the insert? The turning insert features a triangular 60° shape, corner radius 0.8 mm and a 0° negative rake, which together provide a robust edge and stable cutting behaviour. Is this grade appropriate for finishing passes on hardened parts? Yes, the coated cutting ceramic WCH10C is suited to finishing and fine turning in hard‑turning operations thanks to its temperature resistance and wear characteristics. How does chip control work with this insert? Chip management is achieved via the integrated S chipbreaker and the ceramic grade’s tendency to promote short, controlled chips under appropriate cutting conditions. Can this insert be reground or reused? Indexable inserts of this geometry are typically indexed for new cutting edges; refurbishment options depend on local service capabilities and should be discussed with the tool supplier or the manufacturer. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of Walter Tools.
TNGA160408T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Combining the WCK10 cutting ceramic grade with a 60° triangular geometry and a 0.8 mm corner radius delivers reliable high‑speed performance and durable edge life; order the insert directly via Metav Werkzeuge or consult our specialists for matching cutting parameters and application support. TNGA160408T02020 WCK10 — indexable turning insert, Triangle 60°, 0.8 mm radius | Walter Tools The TNGA160408T02020 WCK10 is a triangle 60° indexable turning insert in a WCK10 cutting ceramic grade, designed for high‑speed, temperature‑resistant turning where stable edge performance and consistent chip behaviour are required. Triangle 60° for stable cutting WCK10 cutting ceramic for high speeds 0.8 mm corner radius for edge strength 0° relief (negative) for robust cutting Increased throughput through a high‑speed ceramic grade The WCK10 grade is a cutting ceramic formulated for elevated cutting speeds and resistance to thermal loads; this characteristic enables higher metal removal rates where thermal stability is decisive. As an indexable turning insert from Walter Tools, the grade supports productive turning cycles by tolerating higher cutting temperatures than conventional carbide grades. This results in fewer insert changes and reduced machine downtime, improving overall process economics. For machinists working with heat‑resistant operations, the ceramic composition gives a clear advantage in stable cutting conditions. Geometry engineered for repeatable, stable results A 60° triangular form combined with a 0.8 mm corner radius and a 0° negative relief creates a geometry that balances edge strength and accessibility to confined workpiece features. The triangular shape allows three usable cutting edges per insert, improving tool utilisation, while the specified corner radius increases resistance to chipping when taking interrupted cuts or heavier depths of cut. The flat relief at 0° contributes to a robust cutting edge suitable for heavier cutting forces; together these elements deliver consistent surface finishes and reliable repeatability in serial production. Selection and application guidance for dependable machining This insert belongs to Walter’s open series of cutting grades and is labelled within the manufacturer’s product matrix; suitability for specific ISO material groups must be verified against the technical matrix before application. Where clarity is required, the insert’s tolerance class and execution are given for matching toolholders and clamping systems, and the geometry is chosen to favour stability over extreme shear reduction. For best results, pair the insert with appropriate holder rigidity, coolant strategy and adjusted cutting parameters based on the workpiece material and component tolerances—Metav Werkzeuge consultants can provide parameter recommendations and matching toolholder advice to ensure process security. Choose the Walter Tools WCK10 grade for high‑speed, temperature‑resistant turning and contact Metav Werkzeuge for tailored cutting data and order handling at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: TNGA160408T02020-WCK10-WALTER Article designation: TNGA160408T02020 WCK10 Product type: indexable turning insert Manufacturer: Walter Tools Label: Drehwendeschneidplatte TNGA160408T02020 WCK10 Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Plate form: Triangle 60° Corner radius: 0.8 Plate size: 16 Plate thickness: 04 Relief angle: 0° (negative) Tolerance class: G Execution: A Special features Grade: WCK10 (cutting ceramic) Grade description: cutting ceramic for high cutting speeds and temperature‑resistant machining Sort and series: Walter Schneidstoffsorte - Serie offen Note: Suitability dependent on ISO material group; check product matrix FAQ Which materials are suitable for this ceramic grade? The WCK10 ceramic grade is designed for high‑speed, temperature‑resistant turning; suitability must be checked against the Walter Tools product matrix for the specific ISO material group before machining with the TNGA160408T02020 WCK10 insert. How does the 0° negative relief affect machining performance? A 0° negative relief on this insert increases edge robustness and resistance to mechanical shock, making the insert well suited to heavier cuts and interrupted machining while maintaining stability of the cutting edge. How many cutting edges are available per insert and what is the geometry? The triangular 60° geometry provides three usable cutting edges per insert; the 0.8 mm corner radius improves edge strength and helps prevent chipping during higher load conditions. Is the TNGA160408T02020 WCK10 suitable for finishing operations? While the insert offers thermal stability and robust edges, finishing outcomes depend on machine rigidity, holder choice and cutting parameters; the grade can achieve good surface quality when set up with appropriate feeds and speeds. What should be considered when integrating this insert into existing tooling systems? Check holder compatibility with the TNGA160408T02020 designation, confirm tolerance class G and execution A match the clamping system, and consult the Walter Tools matrix for cutting data relevant to the workpiece material. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TNGA160408TM-3 WBH10 WBH10 Wendeplatten - Walter Tools
Taking advantage of the CBN WBH10 grade, triangular geometry and a 0.8 mm corner radius ensures consistent performance in hard-turning operations; order technical consultation or purchase via Metav Werkzeuge for rapid supply and application support. TNGA160408TM-3 WBH10 indexable turning insert — Walter Tools, CBN grade for hard turning TNGA160408TM-3 WBH10 is a CBN indexable turning insert designed for hard machining of steels and pre-hardened materials, offering a robust cutting edge and stable performance for demanding production processes. CBN grade WBH10 for hard turning Triangular 60° geometry 0.8 mm corner radius for robust edge 0° negative rake for stable cutting Increased productivity on hardened steels through CBN technology The combination of CBN cutting material and the WBH10 grade is optimised for high-resistance applications. CBN is a superabrasive designed specifically for hardened steels, delivering superior wear resistance compared with conventional carbide grades. This results in longer effective cutting intervals and less frequent index changes, which translates directly into higher machine uptime and improved process stability. The insert's construction supports consistent chip formation under high contact stresses, reducing the need for frequent tool interventions and helping to maintain cycle-time targets in serial production. Geometry engineered for dimensional stability and repeatable results A triangular 60° geometry provides three usable cutting edges per insert and a stable seating in standard toolholders; combined with the 0.8 mm corner radius, the shape balances edge strength and surface finish. The 0° negative rake offers a neutral to slightly protective cutting action that reduces edge chipping when encountering hardened zones or interrupted cuts. Explaining the terms: the corner radius increases edge robustness at the expense of some cutting force, while negative rake angles shift cutting forces into the tool body for enhanced edge security—both choices favour repeatable accuracy and longer life in heavy-duty turning tasks. Practical benefits for production planning and cost efficiency Because the insert is tailored for high‑wear environments, tool-change frequency is reduced and scrap rates from edge failure are minimised. The indexable design enables rapid repositioning of a fresh cutting edge without regrinding, supporting lean workflows and predictable tooling budgets. For engineering teams assessing total cost of ownership, the longer service intervals and consistent component finish offered by this CBN solution often justify the initial selection in applications where material hardness exceeds conventional turning ranges. Application guidance and support for process optimisation This insert is particularly suited to finishing and semi-finishing of hardened steels and pre-hardened components where dimensional accuracy and surface quality are critical. For machine setups that experience variable hardness or interrupted cuts, the stable edge geometry and CBN wear resistance help avoid sudden tool loss. If additional data is required for feed and speed recommendations or for verifying compatibility with a specific toolholder, technical consultation is available; Metav Werkzeuge can provide application advice and selection assistance to match the insert to process and material variables. Contact Metav Werkzeuge for tailored application advice, delivery details and availability of the Walter Tools TNGA160408TM-3 WBH10 CBN indexable insert Technical data Article number: TNGA160408TM-3-WBH10-WALTER Designation: TNGA160408TM-3 WBH10 Series: Walter CBN / Hartstoff Grade: WBH10 Execution: A Core specifications Plate form: Triangular 60° Plate size: 16 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Chipbreaker: 3 Tolerance class: G Material & applications Material code: H (hardened steels) Suitable for hardened steels Suitable for pre-hardened steel Suitable for steel CBN cutting material for high wear resistance FAQ What materials is this insert best suited for? The TNGA160408TM-3 WBH10 insert is designed for hardened steels and pre-hardened components; its CBN composition makes it particularly effective where abrasion resistance is required. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius increases edge robustness and contributes to consistent surface finish and dimensional stability during heavy or interrupted cuts when using this indexable insert. Can the insert be used for roughing operations? While optimised for hard turning and finishing, the robust geometry and CBN grade can tolerate aggressive conditions; suitability for specific roughing strategies should be verified with process data and Metav Werkzeuge consultants. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting edges per insert, enabling quick indexing and efficient edge utilisation. Where to get guidance on feeds and speeds for this CBN insert? Metav Werkzeuge can supply tailored recommendations for cutting parameters based on machine capabilities, workpiece material and component tolerances for the TNGA160408TM-3 WBH10. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGA160408TM-3 WBH10C WBH10C Wendeplatten - Walter Tools
Benefit from the combination of CBN-grade WBH10C hardness, a triangular 60° geometry and a 0.8 mm corner radius for consistent performance in hard-turning operations; order directly via Metav Werkzeuge or contact the consultants for application advice. TNGA160408TM-3 WBH10C indexable turning insert — CBN grade for hard turning (Walter Tools) The TNGA160408TM-3 WBH10C is a triangular 60° indexable turning insert designed for heavy-duty hard turning of hardened steels and other high-wear materials, offering a negative 0° rake for robust machining. CBN grade WBH10C for heavy wear resistance Triangular 60° shape for versatile turning 0.8 mm corner radius for consistent edge strength Negative 0° rake for robust and stable cuts High wear resistance that extends tool life and stabilises cycles The coated CBN grade WBH10C is formulated for the demands of hard machining and delivers exceptional wear resistance when machining hardened steels (designation H). This material choice reduces flank wear and extends edge life under high contact stresses, which in turn increases process uptime and lowers tooling consumption per component. For production environments where repeatability and predictable tool change intervals matter, the combination of a wear-resistant cutting grade and stable geometry contributes directly to more consistent cycle times and fewer unscheduled interventions. The insert designation is optimised for applications that require controlled tool life and dependable performance. Geometry and edge design for secure cutting and chip control The triangular 60° configuration and the 0.8 mm corner radius produce a stable cutting edge that tolerates moderate interrupted cuts without rapid edge deterioration. The negative 0° free angle creates a robust cutting face that resists edge chipping under high radial loads, while the specified chipbreaker index 3 supports orderly chip formation in hard materials. Together, these features mean improved surface integrity and reduced rework. Operators and process planners will find the geometry useful where mechanical stability is required, particularly on hard-turning operations where cutting forces and heat generation are elevated. Practical integration: process security and handling benefits Designed as part of the Walter CBN / hard material series, this insert is supplied to established ISO designation standards and tolerance class G, enabling straightforward toolholder compatibility and predictable indexing. The plate size code indicates a 16-series geometry with a thickness code 04, making it suitable for common turning toolholders that accept TNGA-style inserts. The robust specification simplifies tool inventory management and supports quick tool changes during production. Technical teams prioritising process security and reproducible component quality will value the balance of a specialised CBN cutting grade and standardised insert form, which together promote stable machining and efficient integration into existing turning cells. For application support or to discuss how this Walter Tools CBN insert suits specific hard-turning tasks, contact Metav Werkzeuge for tailored advice and order coordination Technical Data Article number: TNGA160408TM-3-WBH10C-WALTER Type: Indexable turning insert (Drehwendeschneidplatte) Designation: TNGA160408TM-3 WBH10C Series: Walter CBN / hard material Grade: WBH10C Material application code: H (hardened steels) Execution: A Tolerance class: G Facts Corner radius: 0.8 mm Plate size: 16 Thickness code: 04 Free angle: 0° (negative) Plate form: Triangular 60° Special features Coating / cutting material: coated CBN grade WBH10C Chipbreaker: 3 Intended use: Hard turning / machining hardened steels Sort and series description: High wear resistance, designed for hard and high-wear tasks FAQ What materials is this insert suited for? The insert is intended primarily for hardened steels (H); the WBH10C CBN grade of this Walter Tools turning insert is optimised for hard machining tasks and offers high wear resistance for such materials. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides improved edge strength and surface integrity during turning; the geometry reduces the risk of edge chipping in harder materials while supporting stable cutting conditions. Is the insert compatible with standard TNGA toolholders? The designation TNGA160408TM-3 indicates compatibility with holders designed for TNGA-style triangular 60° inserts; tolerance class G and the standard form support straightforward integration into compatible toolholder systems. What advantages does the negative 0° rake deliver? The negative 0° rake increases the robustness of the cutting edge and improves stability under high cutting forces, which is beneficial in hard-turning operations where mechanical loads and temperature are elevated. Does the WBH10C grade require any special cutting parameters? The WBH10C CBN grade is engineered for hard materials and typically demands process parameters tuned for lower cutting speeds and stable feeds appropriate to hardened steels; for exact parameter guidance, consult Metav Werkzeuge or the application specialists. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
TNGA160408TM-3 WBH20 WBH20 Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance, stable edge life and reliable hard‑machining performance; the insert supports consistent productivity when turning hardened steels — order the TNGA160408TM-3 WBH20 directly via Metav Werkzeuge or consult the technical team for application advice. TNGA160408TM-3 WBH20 — Indexable turning insert, CBN grade for hardened steels (Walter Tools) The TNGA160408TM-3 WBH20 is an indexable turning insert engineered for hard‑machining tasks, providing a robust cutting edge for the efficient machining of hardened steels and similar demanding materials. CBN grade WBH20 for hard turning Triangle 60° insert, 16 mm inscribed circle 0.8 mm corner radius for stable cutting edge Negative 0° rake angle for high cutting forces Predictable performance for hardened materials The use of CBN as the cutting material in this insert delivers high abrasion resistance, which directly translates into longer tool life and fewer interruptions for tool changes. Designed specifically for the machining of hardened steels, the geometry permits secure engagement at elevated cutting pressures; this means production runs with consistent dimensional results and reduced rework. The combination of a wear‑resistant grade and a robust edge form ensures steady performance even under the thermal and mechanical stresses typical of hard turning. Robust geometry that stabilises cutting forces A triangle 60° shape with a 0.8 mm corner radius gives the insert a sturdy cutting profile, improving edge stability and reducing chipping risk. The negative 0° rake angle supports high feed and depth‑of‑cut applications by shifting loads into the insert body rather than the edge, which is advantageous for interrupted cuts or heavy cross sections. For process planners this means a reliable balance between productivity and component quality, with the cutting geometry tailored to hold form tolerance under complex machining cycles. Clear application range and simplified selection This indexable insert is aimed at hard machining: workpiece groups classified under hardened steel are the primary target. The insert’s designation and grade simplify tool selection for applications where high wear resistance is essential, removing guesswork from the choice of cutting material. For operators less familiar with CBN technology: CBN (cubic boron nitride) is a superhard cutting material that sustains sharpness at high temperatures and is especially effective where conventional carbide wears rapidly. Practical benefits for production and maintenance Using a dedicated CBN turning insert reduces the frequency of tool changeovers and the need for complex dressing procedures, resulting in lower process downtime and improved throughput. The insert’s standardised dimensions and proven grade ensure repeatable clamping and indexing in established toolholders, supporting predictable maintenance intervals and easier spare‑part management. Where surface finish and edge integrity are critical, the insert contributes to consistent outcomes across batches, aligning with lean production and quality assurance targets. For precision hard‑machining applications rely on Walter Tools expertise — order the TNGA160408TM-3 WBH20 through Metav Werkzeuge or contact Metav Werkzeuge’s technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical data Article number: TNGA160408TM-3-WBH20-WALTER Designation: TNGA160408TM-3 WBH20 Facts Insert form: Triangle 60° Inscribed circle / size: 16 Thickness: 04 Corner radius: 0.8 mm Rake / clearance: 0° (negative) Special features Series: Walter CBN / hard material Grade / sort: WBH20 (CBN cutting material) Intended for: hardened steels (H) Chipbreaker: 3 FAQ What materials is this insert suitable for? The insert is specified for the machining of hardened steels; the WBH20 CBN grade is optimised for high wear resistance when turning hardened steels. How does the CBN grade WBH20 compare to carbide for hard turning? WBH20 (CBN) offers substantially higher thermal and abrasion resistance than carbide in hardened material applications, yielding longer tool life and more consistent dimensional control for hard turning operations. What is the geometry and how does it affect cutting? The triangular 60° form with a 0.8 mm corner radius and negative 0° rake provides a sturdy edge suited to high cutting loads and intermittent cuts, improving edge stability and reducing chipping. Is this insert compatible with standard TNGA toolholders? The designation TNGA160408TM‑3 indicates the standardised insert geometry for matching TNGA toolholders; compatibility with the corresponding Walter toolholder family is expected. Can this insert be used for finishing passes? Yes; due to the stable edge and CBN wear resistance, the insert can maintain surface quality in finishing and semi‑finishing passes on hardened steels. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGA160408TM-3 WBH30 Wendeplatten - Walter Tools
Take advantage of the combination of CBN wear resistance, stable cutting geometry and easy indexing for consistent hard-machining results; order the insert via Metav Werkzeuge or consult their specialists for process support. TNGA160408TM-3 WBH30 Turning Insert — CBN grade WBH30, Triangle 60°, 0° negative rake by Walter Tools The TNGA160408TM-3 WBH30 is a triangular indexable turning insert designed for hard machining and finishing of hardened steels, featuring a CBN WBH30 grade for prolonged tool life. CBN grade WBH30 for hard machining Triangle 60° geometry for consistent indexability 0° negative rake for stable cutting forces 0.8 mm nose radius for fine surface finish Superior wear resistance for hard and abrasive materials The CBN-based WBH30 grade delivers high wear resistance and stable cutting-edge performance when machining hardened steels. Cubic boron nitride (CBN) is a superabrasive that maintains a sharp edge at elevated temperatures and under high mechanical stress; this characteristic reduces flank wear and prolongs effective cutting life compared with conventional carbide grades. For operations that demand repeatable dimensions and lower downtime, the insert’s material choice translates into fewer tool changes and more consistent batch quality. The triangular indexable format also allows rapid rotation to fresh cutting edges, supporting continuous production. Consistent chip control and surface quality through geometry The triangular 60° shape combined with a 0.8 mm corner radius and an integrated chipbreaker 3 produces a controlled chip form and reduces vibration in interrupted or finishing cuts. The 0° negative rake stabilises cutting forces, which is particularly beneficial when confronting variable workpiece hardness or small overhangs; stable forces mean improved dimensional stability and more predictable tool life. Operators seeking improved surface finish will find the modest nose radius and chip control helpful for achieving tighter tolerances without resorting to lower metal removal rates. Process benefits: predictable tool life and simplified logistics Using a CBN insert from the Walter Tools CBN / hard material series supports higher process reliability in hard turning applications. The grade’s focus on hard machining reduces scrap risk and can lower overall machining costs by extending effective tool life. Indexable inserts like this one simplify tool inventory management because one insert supports multiple indexed edges; the triangular format offers three usable cutting corners per insert. For production planning, this means fewer tool set-ups and quicker interventions when replacements are required, contributing to improved machine utilisation and workflow efficiency. For tailored advice on integrating Walter Tools CBN inserts into production, contact Metav Werkzeuge for application recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TNGA160408TM-3-WBH30-WALTER SKU: TNGA160408TM-3-WBH30-WALTER Facts Insert shape: Triangle 60° Size: 16 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: 3 Execution: A Tolerance class: G Special features Grade: WBH30 (CBN) Series: Walter CBN / hard material Material code: H Suitable for: hardened steel Application: Hard machining / finishing FAQ What materials is this insert intended for? The WBH30 CBN grade is intended primarily for hardened steels and similar hard materials; the TNGA160408TM-3 insert is optimised for hard machining tasks. How does CBN performance compare with carbide for hard turning? CBN, as used in the WBH30 grade, maintains edge stability at higher temperatures and under heavy wear conditions, offering longer effective life than conventional carbide when machining hardened steels. What effect does the 0.8 mm nose radius have on surface finish? A 0.8 mm corner radius balances strength and finish: it supports a smooth surface in finishing passes while retaining edge robustness for interrupted cuts. Is the triangular geometry beneficial for indexability? Yes; the triangle 60° geometry provides three usable cutting edges per insert, enabling economical indexing and fast edge changes for continuous production. What cutting conditions are typical for this type of insert? Cutting conditions depend on workpiece hardness and machine rigidity; the WBH30 CBN grade is chosen when stable, wear-resistant performance is needed under hard-turning regimes. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. References to brand names, including Walter Tools, are for explanatory purposes only and do not imply any affiliation or endorsement by Metav Werkzeuge. The offered article is an original, factory-new product from the named manufacturer.
TNGA160408TS-3 WBK20 WBK20 Wendeplatten - Walter Tools
Benefit from the CBN-grade WBK20 for superior wear resistance and the secure triangle 60° geometry with a 0° negative rake for robust turning of hard materials. Order the TNGA160408TS-3 WBK20 directly via Metav Werkzeuge or ask our consultants if needed. TNGA160408TS-3 WBK20 indexable turning insert — Walter Tools, CBN grade, triangle 60° The TNGA160408TS-3 WBK20 is a triangle 60° indexable turning insert designed for demanding, wear‑intensive turning tasks where CBN performance and edge security are required CBN grade WBK20 for hardened materials Triangle 60° insert for versatile turning 0.8 mm corner radius for robust edge High-performance cutting for hardened components The use of CBN (WBK20) as the cutting material provides markedly improved wear resistance and edge stability compared with conventional grades when machining hardened steels and comparable substrates. This results in longer tool life and fewer index changes, which supports higher machine utilisation and consistent part quality. For production environments where repeatability and low downtime matter, the CBN composition reduces the frequency of regrinding or replacement and helps maintain process windows for tight tolerances. Geometry and edge design that deliver secure results The triangle 60° plate form combined with a 0.8 mm corner radius and a 0° (negative) rake creates a sturdy cutting edge that tolerates interrupted cuts and heavy contact loads. The broader cutting edge area also helps to distribute forces, lowering the risk of chipping in roughing passes. The integrated chipbreaker 3 supports controlled chip formation and evacuation, which is particularly beneficial during continuous production runs where stable chip flow reduces the likelihood of rework and tool-related stops. Practical application guidance and material suitability This insert is optimised for applications that demand high abrasion resistance; suitability for gusseisen, superalloys or other materials must be verified against the product matrix. The designation and series information indicate that the grade is intended for hard and highly abrasive conditions: check the specific workpiece material and machining parameters before series deployment. For customers seeking reliable setup values or parameter examples, Metav Werkzeuge’s technical team can advise on feeds, speeds and coolant strategies to achieve the desired surface finish and component integrity. For guidance on using the Walter Tools TNGA160408TS-3 WBK20 in specific production scenarios or to request availability, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: TNGA160408TS-3-WBK20-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools ISO designation: TNGA160408TS-3 WBK20 Facts Plate size: 16 Plate thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: G Special features Grade: WBK20 (CBN) Plate form: Triangle 60° Chipbreaker: 3 Execution: A Series: Walter Schneidstoffsorte - Serie offen Note: Check material suitability against the product matrix FAQ What materials is this insert best suited for? The TNGA160408TS-3 WBK20 is manufactured in a CBN grade (WBK20) and is best suited for hardened steels and other abrasive, hard materials; compatibility with specific alloys should be checked against the product matrix. How does the 0° negative rake affect machining? A 0° (negative) rake provides a stronger cutting edge and increased resistance to chipping under heavy loads, which is why the TNGA160408TS-3 WBK20 is recommended for robust turning operations. Is the chip control suitable for continuous production? Yes, the integrated chipbreaker 3 supports controlled chip formation and evacuation, improving process stability during continuous runs with the TNGA160408TS-3 WBK20. What benefits does the 0.8 mm corner radius bring? The 0.8 mm corner radius increases edge strength and distributes cutting forces more evenly, reducing the risk of chipping and enabling more aggressive roughing passes. Where can machining parameters for this insert be obtained? Typical feeds and speeds for the TNGA160408TS-3 WBK20 can be provided by Metav Werkzeuge’s technical advisors, who will match parameters to the workpiece material and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory-new product of Walter Tools.
TNGA160412T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Take advantage of the combination of high-speed capability, robust edge stability and consistent geometry for reliable, productive turning operations; order original Walter Tools inserts through Metav Werkzeuge or consult the team for material-specific application advice. TNGA160412T02020 WCK10 Drehwendeschneidplatte — triangular 60°, rε 1.2, Walter Tools The TNGA160412T02020 WCK10 is an indexable turning insert in a triangular 60° form, specified for high-speed and temperature-resistant machining thanks to its cutting-ceramic grade and engineered geometry. Triangular 60° geometry for versatile turning WCK10 cutting-ceramic grade for high-speed machining 0° negative rake for robust edge stability Corner radius 1.2 mm for predictable chip control Achieve higher throughput with a ceramic-grade cutting edge The WCK10 designation identifies a cutting-ceramic grade developed for elevated cutting speeds and thermal stability; this makes the insert particularly suitable where rapid metal removal and heat resistance are decisive. In practical terms, a ceramic-grade insert resists abrasive wear at temperature, which can extend component run lengths and reduce tool-change frequency. For production planners this translates into a measurable improvement in cycle times and, where compatible with the workpiece material, a potential reduction in overall machining costs while maintaining surface integrity. Stable cutting geometry for predictable results The triangular 60° shape combined with a corner radius 1.2 mm delivers a balance between strength and form control: the geometry supports stable cutting across varied turning profiles while the defined radius smooths edge engagement and reduces vibration. The 0° negative rake emphasises edge robustness, improving performance in interrupted cuts or heavier engagement scenarios. These geometric choices support consistent dimensional accuracy and make setup reproducibility easier when integrating the insert into existing toolholder systems. Process integration and repeatability on the shop floor Key production attributes such as tolerance class G, size 16 and thickness code 04 indicate a standardised component suitable for series production and rapid replacement. Tolerance class grading ensures repeatable seating and orientation in toolholders, which is essential for automated or multi-shift operations where tool-change consistency matters. The coded thickness and size simplify stock management and ensure that tooling lists and CAM setups remain coherent across batches, reducing setup time and potential error sources. Practical suitability and material considerations The insert is supplied as part of the Walter series described as an open grade; the specific matrix for material selection should be consulted to verify suitability for individual alloys. Ceramic grades excel in applications where temperature-induced softening of other tool materials would limit performance, but success depends on matching grade to ISO workpiece groups and cutting parameters. For customers seeking to optimise feed and speed, the insert’s combination of thermal resistance and robust geometry offers a route to increased productivity where conventional carbides might reach their limits. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools TNGA160412T02020 WCK10 inserts — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data SKU: TNGA160412T02020-WCK10-WALTER Article designation: TNGA160412T02020 WCK10 Product type: indexable turning insert Manufacturer: Walter Tools Series: Walter cutting grade series — open Facts Geometry: Dreieck 60° (triangular 60°) Corner radius: 1.2 mm Rake angle: 0° (negative) Size: 16 Thickness code: 04 Tolerance class: G Special features Cutting material: Schneidkeramik (cutting-ceramic) — WCK10 Material dependency: catalogue-dependent specification Application note: check product matrix for workpiece suitability Purpose: high-speed and temperature-resistant machining FAQ What materials is this insert designed for? The TNGA160412T02020 WCK10 insert is a cutting-ceramic grade intended for high-speed and temperature-resistant machining; suitability for specific ISO material groups should be verified against the product matrix. How does the 0° negative rake affect cutting behaviour? A 0° negative rake improves edge strength and resistance to chipping during interrupted cuts; the insert’s geometry offers robust performance under heavier engagement. Is the corner radius suitable for finishing operations? The 1.2 mm corner radius delivers controlled engagement and better load distribution; it is optimised for a balance of strength and surface control rather than ultra-fine finishing. Can the insert be used interchangeably with other TNGA formats? The TNGA160412T02020 WCK10 follows standardised sizing and tolerance class G, supporting interchangeability in compatible TNGA toolholders that accept size 16 and thickness code 04. Where can application-specific advice be obtained? Application recommendations and parameter optimisation can be provided by Metav Werkzeuge; refer to the product matrix and consult for material-specific cutting data. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com