TCMT16T308-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the proven combination of Tiger‑tec Gold coating and the WPP10G grade for sustained wear resistance and consistent chip control when machining steel; the triangular 60° form with a 0.8 mm corner radius supports secure cutting edges and reliable performance. Order the TCMT16T308‑MP4 WPP10G inserts via Metav Werkzeuge or consult the technical advisors for application guidance. TCMT16T308‑MP4 WPP10G indexable turning insert — Tiger‑tec Gold, MP4 chipbreaker by Walter Tools A TCMT16T308‑MP4 WPP10G indexable turning insert designed for machining steel, combining Tiger‑tec Gold coating and an MP4 chipbreaker to ensure stable chip formation and extended tool life Tiger‑tec Gold coating for enhanced wear resistance MP4 chipbreaker optimised for steel machining Triangular 60° form for stable cutting performance 0.8 mm corner radius improves edge strength Increased throughput through advanced coating technology The combination of Tiger‑tec Gold and the WPP10G cemented‑carbide grade provides a noticeable improvement in tool life when machining steel (ISO P). The multilayer coating reduces flank wear and helps to maintain cutting geometry under thermal load, which leads to fewer tool changes and higher component throughput. This insert is engineered to handle the temperature and chip‑formation behaviour typical for unalloyed and alloyed steels, delivering predictable performance in serial production and reducing process variability. Secure edges and consistent surface quality The Triangular 60° geometry together with a 0.8 mm corner radius offers a robust cutting edge that resists chipping while allowing for controlled depth of cut adjustments. The MP4 chipbreaker is tuned for steel, promoting stable short to medium chips and improving surface finish on turned parts. The specified clearance and geometry contribute to reproducible results and help to conserve machine time by lowering rework rates and achieving the required dimensional accuracy more consistently. Simple integration and reliable process behaviour Designed with industry standards in mind, the insert fits common TCMT toolholders and is produced to tolerance class M, ensuring interchangeability and ease of replacement during routine maintenance. The consistent geometry and coating behaviour support stable machining across batches, which aids in process planning and tool‑life forecasting. This stability reduces unplanned downtime and supports efficient shift planning in production environments where repeatability is essential. Application focus and material suitability Optimised specifically for ISO group P (steel), the grade provides a balance of wear resistance and toughness suitable for a broad range of steel components, from general turning to finishing operations. The insert's profile and chip control make it suitable for both conventional and higher‑productivity turning strategies where consistent chip evacuation and edge retention are required. For operations centred on steel turning, this insert offers a practical route to improved cycle times and reduced tooling costs per part. For precise application advice and to place orders for Walter Tools TCMT16T308‑MP4 WPP10G inserts, contact Metav Werkzeuge for technical consultation and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCMT16T308-MP4-WPP10G-WALTER Designation: TCMT16T308-MP4 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Plate size: 16 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Plate form: Triangle 60° Tolerance class: M Special features Grade: WPP10G (coated cemented carbide) Chipbreaker: MP4 optimised for steel Execution: T Material group: Steel (ISO P) Application: machining of steel FAQ How does the Tiger‑tec Gold coating benefit machining performance? The Tiger‑tec Gold coating on the TCMT16T308‑MP4 WPP10G insert increases wear resistance and thermal stability, which extends tool life and maintains cutting geometry for more consistent part quality. Is this insert suitable for stainless steel applications? This insert is specified for steel (ISO P); stainless steel capability is not indicated for this grade, so selection of an insert specifically rated for stainless materials is recommended for those applications. What does the MP4 chipbreaker provide in practical terms? The MP4 chipbreaker on the TCMT16T308‑MP4 WPP10G promotes controlled chip formation when turning steel, improving surface finish and reducing the risk of long, entangling chips in medium to heavy turning operations. Can the insert be used in standard TCMT toolholders? Yes, the insert is designed for standard TCMT toolholders; manufacturing to tolerance class M supports straightforward interchangeability and secure clamping during production shifts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not imply any affiliation. The offered article is an original, brand‑new product from Walter Tools.
TCMT16T308-MP4 WPP20G - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the MP4 chipbreaker for consistent chip control and extended tool life; the insert’s triangular geometry and 0.8 mm corner radius support robust, productive turning of steel. Order via Metav Werkzeuge or consult their specialists for cutting data and holder compatibility. TCMT16T308-MP4 WPP20G turning insert, triangular 60°, for steel (Walter Tools) TCMT16T308-MP4 WPP20G is a coated turning insert designed for general steel turning applications, combining the Tiger‑tec Gold grade with an MP4 chipbreaker for reliable performance Tiger·tec Gold coating for long tool life Suitable for steel machining (ISO P) Triangular 60° insert, 0.8 mm corner radius MP4 chipbreaker for reliable chip control Increased productivity through advanced coating and grade The combination of Tiger‑tec Gold technology and the WPP20G grade gives this insert a coated carbide surface engineered for extended wear resistance during continuous steel machining. This results in fewer tool changes and more consistent cycle times, which supports cost-effective production runs in small-batch and serial turning operations. The coating reduces edge deterioration under typical cutting temperatures encountered with ISO P materials, ensuring a predictable service life and stable component quality. Stable cutting and chip control for secure machining With the MP4 chipbreaker, a 0.8 mm corner radius and a 7° clearance angle, the geometry promotes dependable chip formation and fracture behaviour in a wide range of turning parameters. The triangular 60° format offers three cutting edges per insert, improving economy per indexable unit and enabling quick re-indexing when required. The tolerance class M ensures dimensional consistency across batches, which is critical for tool presetting and repeatable assembly in automated toolchanging systems. Versatile application and seamless integration into toolholders Designed as a TCMT-indexed insert, the format matches common turning holders for external and light interrupted cuts, simplifying stock management and reducing set-up times. Use of the TCMT16T308-MP4 insert supports productive turning on unalloyed and alloyed steels, with robust edge strength that helps avoid premature chipping during medium-duty finishing and semi-finishing operations. The insert’s dimensions and form factor allow straightforward selection of cutting data; for tailored feeds and speeds contact Metav Werkzeuge for recommended parameters and holder matching. Choose the Walter Tools Tiger‑tec Gold insert for reliable steel turning and contact Metav Werkzeuge for precise cutting data and quick delivery options. Technical data Article number: TCMT16T308-MP4-WPP20G-WALTER ISO designation: TCMT16T308-MP4 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Tolerance class: M Special features Format: TCMT16T308-MP4 Insert geometry: triangular 60° Chipbreaker: MP4 Coating / technology: Tiger‑tec Gold (coated carbide) Application: suitable for steel (ISO P) FAQ What materials is this insert suitable for? The TCMT16T308-MP4 WPP20G insert is specified for steel (ISO P) applications and is optimised for the thermal and chip-forming behaviour typical of unalloyed and alloyed steels. What benefit does the Tiger‑tec Gold grade provide? The WPP20G Tiger‑tec Gold grade enhances wear resistance and edge stability under the cutting conditions common in steel turning, resulting in longer tool life and more consistent surface finish. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker supports controlled chip formation and breakage at typical turning feeds and depths, reducing the risk of entangling chips and improving process reliability. Is the triangular 60° geometry economical? Yes; the triangular 60° shape provides three usable edges per insert and the 0.8 mm corner radius delivers a robust cutting edge suitable for finishing and semi-finishing, improving cost-efficiency per edge. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the manufacturer.
TCMT16T308-MP6 WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MP6 chipbreaker for reliable, productive turning of steel; the geometry ensures repeatable accuracy and good surface finish. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. TCMT16T308-MP6 WPP10G – Triangle 60° turning insert with Tiger·tec Gold for steel (Walter Tools) A TCMT16T308-MP6 WPP10G turning insert engineered for productive steel machining with a robust chipbreaker and wear‑resistant coating. Tiger·tec Gold coated carbide MP6 chipbreaker for reliable chip control Triangle 60° form with 0.8 mm nose radius 7° clearance angle for stable cutting High process reliability through targeted chip control The combination of the MP6 chipbreaker and the Tiger·tec Gold coating delivers consistent chip control and extended tool life in steel turning. The chipbreaker is designed to produce short, controllable chips under the typical thermal and mechanical loads encountered when machining unalloyed and alloyed steel, which reduces interruptions and cleaning time at the machine. The Tiger·tec Gold technology is a coated carbide solution optimised for a balance of wear resistance and toughness, so tool changes are less frequent and machining flows remain smooth. This results in measurable gains in throughput and a reduction in unscheduled downtime. Geometry tailored for repeatable accuracy and surface quality The triangle 60° shape with a 0.8 mm nose radius and 7° clearance angle provides a stable cutting edge that supports both roughing and finishing passes within typical shop workflows. The modest nose radius helps achieve a good compromise between strength and surface finish: it resists chipping while producing a controllable profile on the workpiece. The tolerance class M and plate thickness T3 contribute to secure clamping and consistent seating in tool holders, so dimensional repeatability is improved across indexings. For operators less familiar with insert geometry: the clearance angle prevents rubbing of the flank face, while the nose radius affects the machined edge form and load distribution at the tip. Application guidance and choice considerations for steel machining Designed for the ISO P group, this indexable insert suits machining of a wide range of steels where a blend of wear resistance and toughness is required. The WPP10G grade specifically targets typical steel turning conditions, offering good wear performance on continuous cuts and acceptable toughness in interrupted cuts. When selecting cutting parameters, prioritise stable clamping and appropriate coolant or lubrication strategy to leverage the coating benefits. For process optimisation or when machining less common alloys, Metav Werkzeuge provides application support and can recommend holder and parameter combinations to maximise productivity with this insert. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger·tec Gold inserts and secure the best process settings for your parts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: TCMT16T308-MP6-WPP10G-WALTER Designation: TCMT16T308-MP6 WPP10G Product: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Execution: T Key specifications Size: 16 mm Shape: Triangle 60° Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Tolerance class: M Materials & special features Chipbreaker: MP6 Coating/technology: Tiger·tec Gold Substrate: Coated carbide Application group: P (steel) Suitable for: unalloyed and alloyed steel FAQ What materials is this insert intended for? The TCMT16T308-MP6 WPP10G insert by Walter Tools is specified for the ISO P group and is suitable for machining unalloyed and alloyed steel. How does the MP6 chipbreaker affect performance? The MP6 chipbreaker on the TCMT16T308-MP6 WPP10G promotes short, controllable chips and stabilises the cutting process, improving productivity and reducing machine intervention. What does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on this turning insert increases wear resistance and balances toughness and hardness to extend tool life during steel turning operations. Which geometry features contribute to surface finish? The triangle 60° form together with the 0.8 mm nose radius and 7° clearance angle support stable cutting and consistent surface quality on steel components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any association with our company. The presented article is an original factory‑new product of the manufacturer Walter Tools.
TCMT16T308-MP6 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the MP6 chipbreaker for reliable, productive turning of steels; the triangular 60° form with a 0.8 mm corner radius delivers stable cutting and predictable surface quality. Order the insert via Metav Werkzeuge or consult the technical team for application parameters. TCMT16T308-MP6 WPP20G turning insert — triangle 60°, MP6 chipbreaker (Walter Tools) The TCMT16T308-MP6 WPP20G is a coated carbide turning insert designed for steel turning in general production and professional workshop environments, offering robust wear resistance and controlled chip formation. Tiger·tec Gold coating for extended tool life Optimised MP6 chipbreaker for stable chip control Triangle 60° form for versatile turning applications Suitable for machining steel (ISO group P) High productivity through durable coating and predictable wear The coated carbide grade from the Tiger·tec Gold family, identified as WPP20G, is formulated for machining steels and is optimised for a balanced combination of wear resistance and toughness. The coating reduces flank and crater wear under typical steel cutting temperatures, which in turn extends tool life and reduces indexing frequency. For production lines where uptime and repeatability matter, this insert supports consistent component dimensions and surface quality. The result is measurable process stability and fewer interruptions for tool changeover, contributing to economic machining cycles. Stable chip control and surface quality with MP6 geometry The MP6 chipbreaker is engineered to produce manageable chips and to reduce the risk of built-up edge during steel turning. Combined with the 0.8 mm corner radius and triangle 60° form, the geometry promotes steady cutting forces and a predictable cutting pattern, which is beneficial when repeatable surface finish is required. The insert form also allows multiple indexing positions for efficient use of the cutting edges. For users less familiar with chipbreaker terminology: MP6 describes a profile that controls chip thickness and curl to prevent long, stringy chips and to ease evacuation from the cutting zone. Application range, handling and mounting benefits Classified for ISO group P (steel), the insert is suitable for unalloyed and alloyed steels where moderate to high wear resistance is needed. The nominal size is 16 mm with a T3 thickness and a clearance angle of 7°, which makes the insert compatible with standard turning tool holders designed for TCMT-style plates. The moderate corner radius supports both finishing and semi-finishing operations without excessive cutting forces. As a coated indexable insert, it fits into established toolholder systems, enabling quick index changes and minimised setup times. For specific cutting data and recommendations, consult Metav Werkzeuge’s technical advisory to ensure optimal parameters for the chosen workpiece and machine. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to arrange supply or delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT16T308-MP6-WPP20G-WALTER SKU / designation: TCMT16T308-MP6 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Form: Triangle 60° Tolerance class: M Special features Grade: WPP20G Chipbreaker: MP6 Material group: P (steel) Coating technology: Tiger·tec Gold Execution: T FAQ Is this insert suitable for alloyed steels? The TCMT16T308-MP6 WPP20G insert is specified for ISO group P, which includes unalloyed and alloyed steels; the WPP20G grade and Tiger·tec Gold coating are aimed at providing good wear resistance when machining these materials. What advantage does the MP6 chipbreaker provide? The MP6 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which reduces the likelihood of long stringy chips and helps maintain a consistent surface finish during turning. How does the 0.8 mm corner radius influence machining? A 0.8 mm corner radius gives a compromise between strength and finish: it supports semi-finishing and finishing passes with improved edge robustness compared with very small radii, while still enabling good surface quality. Can the insert be used in existing TCMT tool holders? The designation TCMT16T308 indicates the insert geometry and size; it is intended for standard toolholders that accept TCMT-shaped inserts of the corresponding size and thickness. What does the Tiger·tec Gold designation mean for production? Tiger·tec Gold denotes the coating and substrate technology that enhances wear resistance and toughness, which typically leads to longer tool life and greater process reliability in steel turning applications. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new merchandise from the manufacturer.
TCMT16T308-MW4 WKK20S Wendeplatten - Walter Tools
Take advantage of stable chip formation, an optimised chipbreaker geometry and the Tiger·tec Silver coating for reliable cast iron turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCMT16T308-MW4 WKK20S turning insert by Walter Tools — coated for cast iron with MW4 chipbreaker TCMT16T308-MW4 WKK20S is a triangular indexable turning insert designed for productive machining of cast iron, offering a robust coating and proven chip control for stable, repeatable results Tiger·tec Silver coating for long tool life Optimised for cast iron machining Triangle 60° with 0.8 mm nose radius MW4 chipbreaker for consistent chip control Consistent performance from the coated grade The WKK20S grade within the Tiger·tec Silver family is a coated cemented carbide formulated for the abrasive demands of cast iron. Its surface treatment improves resistance to wear and thermal loading, which translates into longer edge life under intermittent cutting conditions typical of cast components. For production environments this means fewer insert changes, reduced downtime and a more predictable maintenance cycle. The insert’s composition and coating are chosen to balance toughness and abrasion resistance, providing a pragmatic compromise between tool life and cutting reliability. Geometry engineered for chip control and surface quality The triangular 60° shape combined with an MW4 chipbreaker and a 0.8 mm nose radius delivers controlled chip formation and good surface integrity on cast iron workpieces. The 7° clearance angle reduces flank contact while maintaining cutting stability, which helps to avoid built-up edge and improves the consistency of part finish. The compact T3 thickness ensures rigidity in typical toolholders for this insert size, so the tool sustains cutting forces without excessive vibration. These geometry choices result in higher first-pass yields and less rework when machining abrasive cast materials. Practical application and setup guidance for production use This insert is optimised for cast iron applications (ISO group K) and fits standard toolholders for the TCMT form. When replacing inserts, ensure correct seat cleanliness and torque to the toolholder specification to retain repeatable runout and clamping force. For roughing operations on grey cast iron, the WKK20S grade performs well at moderate cutting speeds with stable feed rates; for finishing passes, reduce depth of cut and maintain chip evacuation to protect the cutting edge. The design targets industrial workshops seeking a balance of process reliability and tool economy, where reduced indexing frequency aids continuous production flow. For tailored advice on integrating Walter Tools Tiger·tec Silver inserts into a production process, contact Metav Werkzeuge for application support and cutting-parameter recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT16T308-MW4-WKK20S-WALTER Designation: TCMT16T308-MW4 WKK20S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Insert size: 16 Nose radius: 0.8 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MW4 Shape: triangle 60° Application: cast iron (ISO group K) FAQ Is this insert suitable for machining cast iron? The TCMT16T308-MW4 WKK20S insert is specifically designed for cast iron applications and the WKK20S grade is optimised for abrasive cast materials. What does the MW4 chipbreaker provide? The MW4 chipbreaker offers consistent chip control on interrupted and continuous cuts, improving chip evacuation and surface finish when machining cast iron. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating increases wear resistance and thermal stability, which supports longer edge life and fewer tool changes in serial production. What is the recommended nose radius for finishing operations? A 0.8 mm nose radius balances robustness and surface quality; for finer finishes a smaller radius would be chosen, but this insert provides a good compromise for common finishing passes on cast iron. Is this insert compatible with standard TCMT toolholders? Yes, the geometry corresponds to standard TCMT seating forms; verify seat cleanliness and clamping torque during insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product from Walter Tools. The Walter AG (brand appearance: Walter Tools) is among the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
TCMT16T308-MW4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the MW4 chipbreaker for stable chip control and reliable steel machining; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TCMT16T308-MW4 WPP20G — Indexable turning insert, triangle 60°, for steel (Walter Tools) The TCMT16T308-MW4 WPP20G is an indexable turning insert optimised for steel machining, combining a Tiger·tec Gold coating and a robust chipbreaker geometry for productive turning across a wide range of steels. Tiger·tec Gold coating for extended life MW4 chipbreaker for controlled chips Triangle 60° form with 0.8 mm nose radius Suitable for steel (ISO P) machining Faster production through high wear resistance The combination of a Tiger·tec Gold coating and the WPP20G grade offers improved wear resistance and edge stability under typical steel turning conditions. The coated cemented-carbide substrate allows for elevated cutting speeds while maintaining consistent tool life; this leads to fewer insert changes and higher machine uptime. For production environments where cycle time and predictable performance matter, the enhanced abrasion resistance directly supports process reliability and repeatable part quality. Consistent surface finish with controlled chip formation The MW4 chipbreaker is designed to ensure regular chip formation and evacuation during turning operations, reducing the risk of built-up edge and surface damage. Combined with the triangle 60° geometry and a 0.8 mm nose radius, the geometry supports a good balance between robustness and finish quality: the nose radius contributes to surface integrity, while the clearance angle prevents rubbing. These features help to achieve a dependable surface finish with fewer reworks in medium-duty to heavy-duty turning. Practical geometry for versatile workshop use The insert’s triangle form (60°) and the specified thickness (T3) provide geometric stability for a range of turning tasks, from roughing to semi-finishing in steels. The tolerance class M ensures consistent fitment and repeatability in most standard toolholders. As a coated turning grade tailored to ISO P materials, this insert is a pragmatic choice for job shops and production facilities that require a universal grade capable of handling both unalloyed and alloyed steels with predictable results. Clear handling benefits and process advantages Designed for reliable indexing and stable cutting behaviour, this insert reduces unplanned downtime and supports higher part throughput. The combination of coating, grade and chipbreaker technology gives a measurable benefit in tool life and process stability, meaning fewer tool changes and a more efficient workflow on turning machines. For operations seeking to improve productivity without complex process changes, the insert presents a straightforward upgrade to conventional grades. Discuss application-specific recommendations with Metav Werkzeuge — contact Metav Werkzeuge for cutting tests, grade selection and supply advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TCMT16T308-MW4-WPP20G-WALTER Designation: TCMT16T308-MW4 Type: Indexable turning insert (drehwendeschneidplatte) Facts Size: 16 mm Shape: Triangle 60° Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated cemented carbide) Chipbreaker: MW4 Material application: Steel (ISO P) FAQ What materials is this insert designed for? The TCMT16T308-MW4 WPP20G insert from Walter Tools is specified for machining steel (ISO P), covering unalloyed and alloyed steels typical in general turning applications. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP20G grade increases abrasion resistance and edge stability, enabling more consistent tool life and higher cutting speeds in steel turning when using the Walter Tools indexable insert. What is the benefit of the MW4 chipbreaker? The MW4 chipbreaker promotes regular chip formation and reliable evacuation, which improves surface quality and reduces the likelihood of built-up edge during turning with the TCMT16T308-MW4 insert. Is the 0.8 mm nose radius suitable for finishing? A 0.8 mm nose radius provides a balance between robustness and surface finish; it supports semi-finish to finish passes while maintaining tool strength for stable turning operations. Which toolholders are compatible with this insert designation? The designation TCMT16T308-MW4 indicates compatibility with standard toolholders designed for TCMT inserts; confirm holder geometry and clamping specifications before mounting the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T308-MW4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide, precise geometry and stable chip control for efficient machining of stainless steels and high-temperature alloys; order directly via Metav Werkzeuge or request application advice from our consultants. TCMT16T308-MW4 WSM20S — Turning insert (Tiger·tec Silver), for stainless steels & superalloys — Walter Tools The TCMT16T308-MW4 WSM20S is a triangular 60° indexable turning insert designed for heavy-duty finishing and semi-finishing of stainless steels and heat-resistant superalloys. Tiger·tec Silver coated grade WSM20S MW4 chipbreaker for stable chip control 7° clearance angle for secure cutting 0.8 mm corner radius, triangular 60° High-performance grade for demanding materials The insert combines the Tiger·tec Silver coating technology with the WSM20S coated carbide grade to deliver enhanced thermal resistance and edge stability when machining materials in ISO groups M and S. This makes it particularly suited to applications where workpiece toughness and heat generation challenge tool life. The coated substrate reduces wear and supports reproducible cutting results in continuous and interrupted cuts, providing a predictable production rhythm. Geometry and chip control that stabilise machining The triangular 60° shape with a 0.8 mm corner radius and a 7° clearance angle provides a robust cutting edge and predictable engagement. The MW4 chipbreaker is engineered to produce short, controllable chips under a range of feeds, reducing the risk of entanglement and promoting safe, continuous operation. Such geometry helps maintain surface finish quality while extending the number of usable edge insert indexes on the component. Practical benefits on the shop floor By specifying a coated carbide insert from the Tiger·tec Silver series, workshops achieve longer intervals between tool changes and fewer unplanned stops. The grade’s emphasis on edge strength and coating performance delivers consistent component quality and reduced rework. For production environments where repeatability and throughput matter, the insert’s balance of wear resistance and chip control supports both efficient cycle times and reduced tooling costs per part. Compatibility and recommended applications The insert is intended for turning operations in stainless steels and heat-resistant alloys including titanium-bearing materials; suitability for each specific alloy depends on cutting parameters and machine setup. The TCMT geometry offers flexibility across finishing and semi-finishing tasks where robust edge security and controlled chip formation are priorities. Selection of feeds, speeds and depth of cut should follow the machine capability and workpiece clamping to exploit the grade’s strengths fully. Contact Metav Werkzeuge for tailored cutting data and arrangement of sample tests; Metav Werkzeuge’s technical consultants provide application support and selection guidance for Walter Tools inserts Technical data SKU: TCMT16T308-MW4-WSM20S-WALTER Article designation: TCMT16T308-MW4 WSM20S Product type: Turning insert Facts Insert shape: Triangular 60° Size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: MW4 Material suitability: ISO M (stainless steels), ISO S (superalloys / titanium) FAQ What materials is this insert best suited for? The TCMT16T308-MW4 WSM20S insert from Walter Tools is designed primarily for stainless steels (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S), offering thermal stability and edge strength for demanding cuts. How does the MW4 chipbreaker affect machining? The MW4 chipbreaker on the TCMT16T308-MW4 WSM20S promotes short, manageable chips and consistent evacuation, which helps to protect the cutting edge and maintain surface finish during continuous and interrupted turning cycles. Which cutting geometry benefits are provided by the insert? The triangular 60° form combined with a 0.8 mm corner radius and 7° clearance angle gives a sturdy cutting edge, improved stability under load and flexibility for finishing to semi-finishing operations with predictable tool behaviour. Is this insert suitable for interrupted cuts? Yes; the Tiger·tec Silver coating and the WSM20S grade are formulated to retain edge integrity in applications that include intermittent engagement, making the insert appropriate for certain interrupted turning tasks. How should tool life be optimised with this grade? Optimise tool life by selecting conservative speeds for highly alloyed or work-hardened stainless steels, adjusting feed to match desired surface finish, and ensuring effective chip evacuation; TCMT16T308-MW4 WSM20S benefits from stable clamping and consistent coolant application where applicable. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation between Metav Werkzeuge and those trademark owners. The offered item is an original, factory-new product of the stated manufacturer.
TCMT16T308-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the wear-resistant WKK10S carbide grade and the RK4 chipbreaker for dependable cast-iron turning with consistent chip control; order directly via Metav Werkzeuge or consult our product advisors for application support. TCMT16T308-RK4 WKK10S Triangle 60° Turning Insert, RK4 Chipbreaker – Walter Tools The TCMT16T308-RK4 WKK10S is a triangular 60° turning/boring insert designed for productive cast-iron machining with a Tiger·tec Silver coated carbide grade. Tiger·tec Silver coating for wear resistance WKK10S grade optimised for cast iron RK4 chipbreaker for stable chip control Triangle 60° insert with 0.8 mm radius Greater throughput through optimised wear resistance and chip control The coated carbide grade WKK10S, developed within the Tiger·tec Silver family, is specifically balanced for the abrasive wear and frequently breaking chips encountered in cast-iron machining. The combination of a wear-resistant coating and a dedicated RK4 chipbreaker reduces edge degradation and limits unexpected downtime, delivering noticeable improvements in process reliability and tool life. Explaining the technical effect: the coating lowers friction and thermal stress at the cutting edge, while the RK4 geometry promotes short, controllable chiplets that evacuate cleanly from the cut—this reduces built-up edge and supports repeatable performance in series production. Consistent surface quality and tool life from precise insert geometry The insert’s triangle 60° geometry and a 0.8 mm corner radius provide a balanced contact zone between insert and workpiece, helping to maintain dimensional stability and surface finish during turning. A 7° free rake contributes to controlled cutting forces and predictable wear patterns, making the insert suitable for both stabilised finishing and economical material removal strategies on cast iron. With a size 16 and T3 thickness, nominal rigidity supports higher feed rates without compromising part tolerances; the tolerance class M ensures interchangeability and repeatable clamping accuracy in standard toolholders. Production benefits: consistent chips, lower rework and straightforward tool rotation In a production setting the insert’s features translate into tangible operational advantages. The RK4 chipbreaker fosters stable chip formation, which reduces machine downtime caused by clogged chip paths and improves operator safety. The coated grade’s resistance to abrasive wear decreases the frequency of index changes, while the triangular format yields three cutting edges per insert, aiding economy. The insert is engineered for cast-iron applications, promoting fewer rejects and reduced rework. For procurement and process planning, reliance on established brand standards like Walter Tools contributes to predictable supply and consistent batch quality across production runs. For robust cast-iron turning with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for supply and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable grades and holder compatibility. Technical Data SKU: TCMT16T308-RK4-WKK10S-WALTER Designation: TCMT16T308-RK4 WKK10S Brand: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Chipbreaker: RK4 Core data Size: 16 mm Corner radius: 0.8 mm Free rake angle: 7° Thickness: T3 Tolerance class: M Geometry: Triangle 60° Special features Coating: Tiger·tec Silver Coated carbide grade WKK10S Optimised for cast iron machining Stable chip formation with RK4 Three-edged triangular insert for economy FAQ Which workpiece materials is this insert suitable for? The TCMT16T308-RK4 WKK10S insert is optimised for cast iron work; the WKK10S grade and Tiger·tec Silver coating specifically address the abrasive nature and chip behaviour of cast-iron alloys. What benefit does the RK4 chipbreaker provide? The RK4 chipbreaker produces short, controllable chips that evacuate reliably, reducing chip entanglement and improving machining consistency when turning cast iron with this insert. Is this insert suitable for finishing as well as roughing operations? The insert’s triangle 60° geometry and 0.8 mm corner radius offer a compromise between cutting edge robustness and surface quality, making it suitable for stabilised finishing and economical roughing in cast-iron turning. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating reduces friction and thermal load at the cutting edge, which lowers abrasive wear and helps maintain cutting-edge integrity over longer cycles on abrasive cast-iron materials. What are the key dimensional details to check for holder compatibility? Verify the size 16, triangle 60° geometry, T3 thickness and tolerance class M against the intended toolholder; these dimensions determine correct seating and repeatable clamping for the insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original new goods of the manufacturer.
TCMT16T308-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Silver coating, a precise 0.8 mm corner radius and an RK4 chipbreaker for controlled chip formation and consistent component quality; order directly via Metav Werkzeuge or contact the sales team for application support. TCMT16T308-RK4 WKK20S triangular indexable insert – Walter Tools, Tiger‑tec Silver, for cast iron The TCMT16T308-RK4 WKK20S is an indexable triangular insert designed for productive turning and boring on cast iron components, pairing a robust coated‑carbide grade with a geometry made for stable chip control and long tool life. Tiger‑tec Silver coating for wear resistance Optimised for machining cast iron materials Triangle 60° form with 0.8 mm corner radius RK4 chipbreaker for consistent chip control Higher productivity through engineered coating and grade The combination of the Tiger‑tec Silver coating and the WKK20S grade delivers a measurable advantage when machining abrasive cast iron: improved wear resistance leads to extended tool life and fewer insert changes. The coated carbide design absorbs cutting stresses more evenly, which reduces flank wear and keeps machining cycles productive. For shops aiming to lower cycle time variability, this insert class supports more repeatable processes and less unscheduled downtime, translating into cost efficiency across production runs. Geometry and chip management that stabilise the process A triangular 60° shape with a 0.8 mm corner radius and an RK4 chipbreaker contributes to reliable chip formation and evacuation during interrupted or steady cuts. The modest corner radius balances edge strength with the ability to produce acceptable surface finishes in a single pass, while the RK4 chipbreaker is tuned to the fracture-prone chips typical of cast iron. These geometry choices reduce vibration and protect the cutting edge, resulting in fewer rejects and consistent dimensional outcomes in serial production. Practical integration and holder compatibility The insert is supplied in the standard ISO designation TCMT16T308-RK4 WKK20S, enabling straightforward replacement in established indexable‑insert toolholders and turning systems. The T3 plate thickness and tolerance class M ensure mechanical stability under varying cutting conditions. When mounted correctly in a compatible triangular insert pocket, the geometry and coating together allow for robust cutting parameters that can be leveraged to increase feed rates or extend intervals between tool changes, depending on the machining strategy. Application focus and material suitability Specifically developed for work on cast iron, the WKK20S grade is optimised to handle abrasive wear and the short, brittle chips typical of these materials. The tool’s configuration is therefore especially suitable for grey cast iron and similar iron alloys where chip control and edge life are the primary concerns. For operations requiring high process reliability in cast‑iron turning and boring, this insert offers a targeted balance of economy and performance. For technical advice or to place an order for Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — practical support and fast supply options are available from Metav Werkzeuge Technical data Article number: TCMT16T308-RK4-WKK20S-WALTER SKU / Label: TCMT16T308-RK4 WKK20S Walter Tools Product type: Triangular indexable insert (turning/boring) Facts Size: 16 mm Corner radius: 0.8 mm Free angle: 7° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RK4 Shape: triangle 60° Series: Tiger‑tec Silver Material application: cast iron ISO designation: TCMT16T308-RK4 WKK20S FAQ Which materials is this insert designed for? The TCMT16T308‑RK4 WKK20S is optimised for machining cast iron; the WKK20S grade and Tiger‑tec Silver coating provide abrasion resistance suited to iron alloys. What benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver improves wear resistance and edge life on the TCMT insert, supporting longer cutting intervals and steadier process behaviour when turning cast iron. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker on this triangular insert encourages controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface quality in interrupted or steady cuts. Is the TCMT16T308‑RK4 compatible with standard triangular holders? Yes, the ISO designation and standard geometry are intended for use in common triangular insert pockets; ensure correct clamping and seat condition for optimal performance. What is the typical application for the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and finish capability, making it suitable for general turning operations on cast iron where a durable edge and acceptable surface quality are required. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. The Walter AG brand denotes a leading provider of precision tools and is part of established international tool‑making groups.
TCMT16T308-RM4 WMP20G Tiger-tec Gold Wendeplatten - Walter Tools
The combination of Tiger·tec Gold wear resistance, the RM4 chipbreaker and a 7° clearance ensures stable machining of stainless steels with consistent surface quality; secure supply and technical advice are available via Metav Werkzeuge or its consultants for production-ready implementation. TCMT16T308-RM4 WMP20G triangular indexable insert – Walter Tools, Tiger·tec Gold, for stainless steel machining TCMT16T308-RM4 WMP20G is an indexable insert designed for turning, boring and reaming applications in stainless steels, featuring a Tiger·tec Gold grade and an RM4 chipbreaker for controlled chip formation Tiger·tec Gold coated carbide grade WMP20G Suitable for stainless steel (ISO M) applications Triangular 60° insert with 0.8 mm corner radius RM4 chipbreaker for consistent chip control Reliable performance for stainless-steel production The Tiger·tec Gold coating and WMP20G grade combine to offer standout wear resistance under the high heat and adhesion tendencies of stainless steel. The coating technology reduces flank and crater wear, which prolongs tool life and lowers tool-change frequency, thereby improving throughput. As a coated carbide insert with a robust substrate, it is engineered for medium to heavy-duty conditions where secure edge retention and repeatable results are required. This leads to measurable productivity gains and reduced process variability in series production runs. Improved process security through chip control and geometry Chip management is central when machining austenitic and other tough stainless grades; the RM4 chipbreaker promotes secure chip formation and evacuation, reducing the risk of built-up edge and surface damage. The triangular 60° geometry paired with a 0.8 mm corner radius provides strength at the cutting edge and allows reliable turning operations while maintaining acceptable surface finish. The 7° clearance angle supports stable cutting forces and minimises rubbing, which helps achieve consistent component tolerances and reduces rework rates in downstream operations. Practical integration and supplier support for production environments The insert’s designation, TCMT16T308-RM4 WMP20G, reflects a common industrial interface for toolholders, simplifying tool assembly and inventory management. The insert thickness (T3) and 16 mm size match established toolholder standards, facilitating fast retrofit into existing tool packs. For technical queries or material-specific recommendations, Metav Werkzeuge provides application support and can advise on optimal cutting parameters for specific stainless-steel grades. Reliable supply and clear specifications aid planning for stable production cycles and predictable maintenance intervals. Contact Metav Werkzeuge for tailored technical advice and availability of Walter Tools TCMT16T308-RM4 WMP20G inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to request a detailed quotation or machining recommendations Technical data Article number: TCMT16T308-RM4-WMP20G-WALTER Designation: TCMT16T308-RM4 WMP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Insert size: 16 mm Thickness: T3 Geometry: Triangle 60° Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: RM4 Special features Grade: WMP20G (Tiger·tec Gold) Coating: coated carbide Application: stainless steel (ISO M) Recommended conditions: medium to robust machining FAQ What materials is this insert suitable for? This insert is specified for stainless steel work (ISO group M); the WMP20G grade and Tiger·tec Gold coating are optimised for the adhesion and heat characteristics of these alloys. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation and evacuation, improving process security and reducing the likelihood of built-up edge when machining stainless steels with the TCMT16T308-RM4 WMP20G insert. Can this insert be used in existing toolholders? Yes. The TCMT16T308 geometry is a standard indexable insert format and is compatible with matching toolholders designed for triangular 60° inserts with the corresponding size and thickness. What advantages does Tiger·tec Gold provide compared with uncoated grades? Tiger·tec Gold coating enhances wear resistance and thermal stability. For the WMP20G grade, this translates into longer cutting life and more consistent surface quality under the demands of stainless-steel turning. Where can machining parameters and recommendations be obtained? Metav Werkzeuge supplies application guidance and cutting-parameter recommendations for the TCMT16T308-RM4 WMP20G insert and can provide trial values tailored to specific stainless-steel alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TCMT16T308-RM4 WMP20S WMP20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating and the RM4 chipbreaker delivers stable chip formation and extended edge life; the triangular 60° geometry with a 0.8 mm corner radius ensures repeatable form and secure cutting in rostfreier Stahl applications. Order genuine Walter Tools inserts via Metav Werkzeuge or contact their consultants for tailored machining advice. TCMT16T308-RM4 WMP20S – indexable turning insert (triangle 60°) for rostfreier Stahl, Walter Tools TCMT16T308-RM4 WMP20S is an indexable turning insert designed for machining rostfreier Stahl under medium to robust conditions Tiger‑tec Silver coated carbide Optimised RM4 chipbreaker Triangle 60° with 0.8 mm corner radius 7° clearance for secure cutting Reliable chip control for rostfreier Stahl machining The combination of the Tiger‑tec Silver coating and the WMP20S carbide grade brings a measurable improvement in process stability when machining rostfreier Stahl. The coating technology reduces adhesion and thermal load at the cutting edge, while the RM4 chipbreaker promotes consistent chip segmentation; together these factors reduce the risk of built‑up edge and improve surface finish. For workshop planners and production engineers, this means fewer interruptions for tool changes and more predictable cycle times, supporting efficient, continuous operation. Precision geometry for repeatable accuracy and quick set‑ups The triangular 60° form with a 0.8 mm corner radius and a 7° clearance angle delivers a balance between edge strength and form control. The insert’s geometry supports robust turning operations while maintaining dimensional repeatability on critical diameters. The plate thickness T3 and the standardised indexable design enable multiple indexings per insert, reducing tooling costs per part and simplifying toolholder selection. As a result, machinists achieve consistent part quality with minimal adjustment time between batches. Lower unit costs through extended life and broad applicability WMP20S, as a Walter Tools grade within the Tiger‑tec Silver range, is tailored for rostfreier Stahl and medium to heavy cutting conditions; the outcome is improved wear resistance and longer time between regrinds. The coated carbide construction resists common wear mechanisms encountered with these alloys, translating into lower cost per component and less downtime. Combining stable chip control, a strong cutting edge and proven coating technology makes this insert a pragmatic choice for production environments aiming for both productivity and surface integrity. Contact Metav Werkzeuge for expert application guidance and to source genuine Walter Tools TCMT16T308-RM4 WMP20S inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT16T308-RM4-WMP20S-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T308-RM4 WMP20S Manufacturer: Walter Tools Core data Size: 16 mm Plate thickness: T3 Corner radius: 0.8 mm Clearance angle: 7° Geometry: Triangle 60° Chipbreaker: RM4 Special features Series: Tiger‑tec Silver Grade: WMP20S Suitability: rostfreier Stahl Execution: T Plate designation: TCMT16T308-RM4 SKU: TCMT16T308-RM4-WMP20S-WALTER FAQ What materials is this insert suited for? The insert is engineered for machining rostfreier Stahl; the WMP20S grade and Tiger‑tec Silver technology are tuned to control chips and wear on such alloys. How does the RM4 chipbreaker benefit the process? The RM4 chipbreaker on the TCMT16T308-RM4 design promotes stable chip formation and evacuation, improving surface finish and reducing the chance of build‑up on the cutting edge. How many usable edges are available on the insert? The triangular 60° geometry provides multiple indexable cutting edges per insert, enabling efficient re‑indexing and lower tooling cost per part. Is the insert compatible with standard toolholders? The insert follows common indexable insert dimensions and can be mounted in compatible toolholders suited to TCMT16T308-RM4 geometry for secure clamping and repeatable positioning. Which Walter Tools grade is used, and what is its benefit? The grade is WMP20S, part of the Tiger‑tec Silver series, delivering improved wear resistance and reliable performance in medium to robust rostfreier Stahl turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the named brands. The item offered is original, factory‑new goods of the manufacturer.
TCMT16T308-RM4 WMP30G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, reliable RM4 chip control and a robust triangular 60° geometry for a predictable turning process on rostfreier Stahl; order genuine Walter Tools inserts through Metav Werkzeuge or contact our consultants for application advice. TCMT16T308-RM4 WMP30G — triangular turning/boring insert, Tiger‑tec Gold, Walter Tools A TCMT16T308-RM4 WMP30G indexable insert designed for turning and boring applications, optimised for rostfreier Stahl under medium to robust machining conditions. Tiger‑tec Gold coating for stable cutting edge Designed for rostfreier Stahl, ISO group M RM4 chipbreaker, consistent chip control Maximise uptime with a coated grade made for rostfreier Stahl The combination of the WMP30G grade and Tiger‑tec Gold technology delivers a coated carbide chemistry engineered to resist adhesive wear and support stable chip formation when machining rostfreier Stahl. This specification reduces the risk of built‑up edge and unexpected tool change intervals, which directly improves process reliability and lowers machining cost per component. The RM4 chipbreaker promotes predictable chip shapes that simplify swarf management and reduce manual intervention, resulting in more consistent cycle times on serial production runs. Robust geometry for repeatable surface quality and tool life A triangular 60° shape with a corner radius 0.8 mm and 7° relief provides a balance between strength and cutting action: the geometry supports heavy engagement while preserving a controlled cutting line for repeatable finishes. The insert’s T3 thickness and size 16 ensure secure clamping and resistance to edge chipping during intermittent cuts. These design choices translate into enhanced dimensional stability and more predictable regrinding intervals, supporting quality assurance in precision turning operations. Practical application guidance and machining benefits The indexable insert is intended for use in medium to robust turning operations on rostfreier Stahl (ISO group M). The RM4 chipbreaker is tuned for continuous chip control under the thermal conditions typical of these alloys. In practice, this means fewer interrupted cuts, reduced risk of surface damage and less downstream rework. Compatibility with standard triangular holders makes integration into existing tool setups straightforward, while the coated substrate gives flexibility for balancing cutting speed against tool life according to operation priorities. For reliable rostfreier Stahl performance choose genuine Walter Tools Tiger‑tec Gold inserts via Metav Werkzeuge — for order enquiries or technical selection assistance contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT16T308-RM4-WMP30G-WALTER Designation: TCMT16T308-RM4 WMP30G Brand: Walter Tools Series: Tiger-tec Gold Facts Corner radius: 0.8 mm Relief angle: 7° Plate form: triangular 60° Plate size: 16 Thickness: T3 Special features Coating: Tiger‑tec Gold (WMP30G) Grade: coated carbide Chipbreaker: RM4 Application: rostfreier Stahl (ISO group M) FAQ What materials is this insert suited for? The insert is specified for rostfreier Stahl (ISO group M); the WMP30G grade and Tiger‑tec Gold coating support secure chip formation and edge stability when machining these alloys. How does the RM4 chipbreaker affect chip shape? The RM4 chipbreaker on the TCMT16T308-RM4 WMP30G produces controlled chips suited to continuous turning of rostfreier Stahl, improving swarf control and reducing the likelihood of entanglement at the tool interface. Can this insert be used in standard triangular toolholders? Yes, the triangular 60° form and the T3 thickness are compatible with conventional holders designed for TCMT‑style inserts, allowing straightforward retrofitting into existing tool setups. What performance benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating increases resistance to adhesive wear and thermal softening, which helps maintain a stable cutting edge and extends tool life during demanding rostfreier Stahl operations. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new merchandise from the manufacturer.
TCMT16T308-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM10S grade and an RM4 chipbreaker for stable cutting performance in demanding materials; order the insert via Metav Werkzeuge or consult their specialists for application-specific advice. TCMT16T308-RM4 WSM10S triangular indexable insert, Tiger·tec Silver coating — for stainless steels and superalloys | Walter Tools The TCMT16T308-RM4 WSM10S is a triangular, indexable turning insert designed for productive machining of stainless steels and heat-resistant superalloys in demanding production environments. Tiger·tec Silver coated carbide RM4 chipbreaker for stable chips Triangle 60° insert, 0.8 mm corner radius Suited to stainless steels and superalloys Consistent cutting performance where heat and toughness matter The WSM10S grade, developed within the Tiger·tec Silver family, combines a thermally robust coating with a wear-resistant substrate to improve tool life when machining tough alloys. The combination of a corrosion‑resistant coating and optimised substrate promotes a stable cutting edge, which reduces the risk of built‑up edge formation and uneven wear. Together with the RM4 chipbreaker, this leads to repeatable chip control and fewer interruptions during batch production, supporting higher overall productivity. Geometry engineered for strength and surface quality A triangular 60° plate form with a 0.8 mm corner radius and a clearance angle of 7° gives a balanced compromise between cutting strength and access to the workpiece. The moderate corner radius increases edge robustness for interrupted cuts while still enabling good surface finish under steady light to medium depths of cut. The insert’s T3 thickness contributes to rigidity in the toolholder, helping to maintain dimensional accuracy and reduce vibration in high‑load turning operations. Built for materials that challenge ordinary inserts Rated for material groups S / M, the insert is intended for heat‑resistant superalloys and stainless steels, materials that typically generate high temperatures and tend to work‑harden. The tolerance class M and the coated carbide composition support secure chip formation and predictable wear progression, which simplifies parameter selection for process engineers and reduces trial-and-error at the machine. This results in improved process security and a more consistent surface quality across component lots. Ready for fast changeovers and standard tool systems The TCMT designation and insert size 16 make this plate compatible with a wide range of standard triangular toolholders, enabling quick indexing and part changeovers on lathes and turning centres. The TCMT16T308-RM4 geometry permits multiple usable cutting edges per insert, lowering tooling costs per edge and reducing downtime for insert replacement. Walter Tools’ manufacturing consistency ensures that inserts fit reliably in established clamping systems, supporting short setup times and stable production runs. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application support and to order Walter Tools TCMT16T308-RM4 WSM10S inserts for demanding turning operations Technical data SKU: TCMT16T308-RM4-WSM10S-WALTER Designation: TCMT16T308-RM4 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Insert size: 16 Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Plate form: Triangle 60° Special features Grade: WSM10S (coated carbide) Chipbreaker: RM4 Material suitability: S / M (superalloys / stainless steels) Tolerance class: M Execution: T FAQ What materials is this insert designed for? The TCMT16T308-RM4 WSM10S insert is specified for stainless steels and heat‑resistant superalloys (material groups M and S), where thermal resilience and edge stability are required. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation for steady evacuation and reduced risk of entanglement, improving surface finish and process reliability when turning tough materials with this Walter Tools insert. What does the 0.8 mm corner radius mean for component finish? A 0.8 mm corner radius increases edge strength for interrupted or heavier cuts while still delivering a good surface finish; it is a compromise between robustness and fine surface quality. Is the TCMT16T308-RM4 compatible with standard toolholders? Yes, the TCMT designation and size 16 match common triangular toolholder families, allowing straightforward integration and fast indexing on standard turning equipment. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal stability and wear resistance of the insert, extending tool life and supporting higher cutting speeds in demanding turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer.
TCMT16T308-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a secure RM4 chipbreaker and a robust 0.8 mm corner radius for steady performance when machining stainless steels and superalloys; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TCMT16T308-RM4 WSM20S triangular indexable insert – Walter Tools, Tiger‑tec Silver, for stainless steels and superalloys The TCMT16T308-RM4 WSM20S is a triangular indexable insert designed for turning, boring and related operations, optimised for machining stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coated carbide technology Optimised for stainless steels and superalloys RM4 chipbreaker for secure chip control Triangular 60° insert with 0.8 mm corner radius Consistent cutting in tough materials for greater process reliability The WSM20S grade, applied within the Tiger‑tec Silver series, is a coated carbide blend engineered to maintain a stable cutting edge under high thermal and mechanical stress. This composition enhances chip control and reduces edge build‑up when working with stainless steels, materials that commonly cause work hardening and elevated temperatures. The result is fewer unplanned interruptions, longer tool life and a more predictable production cadence—advantages that directly benefit cycle time and part quality in serial or batch production. Geometry that protects the cutting edge and improves surface finish A triangular 60° format combined with a 0.8 mm corner radius and a 7° relief angle provides a balanced geometry for durable edge strength and reliable contact conditions. The RM4 chipbreaker promotes manageable chip formation, especially under variable cutting conditions, which contributes to consistent surface appearance and repeatable dimensional results. The T3 plate thickness and the insert’s tolerance class M support secure clamping and minimise micro‑vibration, translating into improved process stability on CNC lathes and turning centres. Practical advantages that support productive machining Integrating this insert into turning or boring operations delivers a pragmatic efficiency uplift: the Tiger‑tec Silver coating reduces friction and enhances heat resistance, while the substrate and chipbreaker sustain cutting performance across tougher alloys. For workshops seeking reduced downtime and dependable batch quality, the insert’s features enable longer tool life and stable cutting forces, which together lower total machining costs and help maintain predictable throughput in demanding applications. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts or to request detailed application data via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: TCMT16T308-RM4-WSM20S-WALTER SKU: TCMT16T308-RM4-WSM20S-WALTER Designation: TCMT16T308-RM4 WSM20S Facts Insert size: 16 Plate thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Chipbreaker: RM4 Tolerance class: M Special features Grade: WSM20S Series: Tiger‑tec Silver Material suitability: stainless steels (M), heat‑resistant superalloys/titanium (S) Coating: coated carbide Application: turning / boring / drilling‑related indexable insert Execution: T FAQ What materials is this insert suited for? The TCMT16T308‑RM4 WSM20S insert from Walter Tools is formulated for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium alloys (ISO group S), offering stable chip formation and thermal resilience. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on the TCMT16T308‑RM4 promotes controlled chip fragmentation and evacuation, reducing the risk of entanglement and improving surface integrity during machining of tough materials. Can this insert deliver consistent tool life in serial production? Yes; the combination of Tiger‑tec Silver coating and the WSM20S grade provides improved wear resistance and edge stability, supporting predictable tool life and repeatability in serial machining operations. Which insert geometry ensures dimensional stability? The triangular 60° form with a 0.8 mm corner radius and a 7° relief angle gives the insert robust edge strength and stable contact, which helps maintain dimensional accuracy and surface finish under varying cutting conditions. Is the TCMT16T308‑RM4 WSM20S compatible with standard toolholders? The TCMT ISO format follows common indexable insert standards, and the TCMT16T308‑RM4 WSM20S fits holders designed for TCMT inserts; verification with the chosen holder and clamping system is recommended. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the Swedish Sandvik group and is a globally recognised manufacturer of precision tools for metalworking. Protected trademarks and product names remain the property of their respective owners. The named product is an original, brand‑new article from the manufacturer.
TCMT16T308-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver grade and the WSM30S coating for reliable machining of demanding alloys; the triangular 60° form with a 0.8 mm corner radius and 7° clearance ensures stable chip formation and repeatable edge life. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. TCMT16T308-RM4 WSM30S — triangular insert for heavy-duty stainless and superalloy machining (Walter Tools) The TCMT16T308-RM4 WSM30S is a triangular indexable insert designed for turning and boring applications, optimised for rostfreier Stahl and heat-resistant superalloys using the Tiger·tec Silver coating technology Tiger·tec Silver coated carbide grade WSM30S Suitable for rostfreier Stahl and superalloys Triangle 60° form with 0.8 mm corner radius Consistent performance on rostfreier Stahl and superalloys The coated cemented carbide grade WSM30S is engineered for materials that challenge conventional inserts. When machining rostfreier Stahl, components tend to work-harden and generate high temperatures; the Tiger·tec Silver coating promotes stable cutting edges and improved thermal resistance, reducing the risk of built-up edge. For high-temperature alloys and titanium (group S), the combination of grade and geometry supports controlled wear progression, helping to maintain dimensional accuracy and surface integrity over longer tool life. Geometry that improves chip control and process reliability The triangular 60° shape with a 0.8 mm corner radius and 7° clearance angle provides a robust cutting edge for moderate to heavy depths of cut. The RM4 chipbreaker is matched to the grade and geometry to encourage short, predictable chips during interrupted cuts and unstable setups. This design choice reduces vibration and promotes reliable chip evacuation, which in turn cuts rework and improves cycle-time consistency in production environments. Coating and grade deliver extended edge life The insert’s coated hardmetal construction combines a wear-resistant substrate with the Tiger·tec Silver multilayer coating, optimised for adhesion and heat resistance. This technical combination increases process security by delaying flank and crater wear under elevated cutting temperatures. The result is fewer insert changes, improved tool-life economics and a more stable surface finish — advantages that become tangible in serial production and in the machining of challenging alloys. Practical application and handling benefits The insert is supplied in the TCMT16T308-RM4 geometry and is suited to turning and boring toolholders that accept triangular 60° inserts. The insert’s tolerance class M ensures reproducible seating and orientation, simplifying indexable insert changes and setup repeatability. For shops seeking productivity gains on rostfreier Stahl and superalloys, this insert provides a balance of process stability and predictable maintenance intervals, supporting leaner workflows and fewer interruptions. For tailored advice on integrating the Walter Tools TCMT16T308-RM4 WSM30S into existing turning processes, contact Metav Werkzeuge for application recommendations, availability and rapid dispatch: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: TCMT16T308-RM4-WSM30S-WALTER Article designation: TCMT16T308-RM4 WSM30S Manufacturer: Walter Tools Core dimensions Insert size: 16 mm Shape: Triangle 60° Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Materials & special features Grade: WSM30S Series: Tiger·tec Silver Chipbreaker: RM4 Material applications: rostfreier Stahl (M), superalloys/titanium (S) Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The TCMT16T308-RM4 WSM30S insert by Walter Tools is designed for rostfreier Stahl (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), providing secure chip formation and thermal stability. What does the WSM30S grade offer? WSM30S is a coated cemented carbide grade from the Tiger·tec Silver family, optimised for wear resistance and edge stability when machining demanding alloys, particularly rostfreier Stahl and superalloys. How does the RM4 chipbreaker affect performance? The RM4 chipbreaker is configured to produce short, controllable chips under varied cutting conditions, improving chip evacuation and reducing the risk of entanglement during interrupted cuts. Is the triangular shape advantageous for heavy cuts? The 60° triangular form with a 0.8 mm corner radius provides a strong cutting edge that tolerates moderate to heavy depths of cut and supports repeatable indexing in production toolholders. What tolerance class applies to this insert? The insert is supplied in tolerance class M to ensure reproducible seating and orientation in compatible toolholders. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TCMT16T308-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold wear resistance and the WPP10G grade for reliable machining of Stahl, combined with a compact triangular form and RP4 chip control for steady production results—order directly via Metav Werkzeuge or contact our consultants for application advice. TCMT16T308-RP4 WPP10G triangular indexable insert for Stahl machining — Walter Tools TCMT16T308-RP4 WPP10G is a triangular indexable insert designed for drilling, boring and turning applications where stable cutting performance in Stahl is required Tiger·tec Gold coating for improved wear resistance WPP10G grade optimised for Stahl machining RP4 chipbreaker for controlled chip formation Triangle 60° shape for three effective cutting edges Longer tool life and consistent edge stability The combination of Tiger·tec Gold coating and the WPP10G cemented carbide composition provides elevated wear resistance and a balanced toughness-to-hardness ratio. Designed specifically for machining Stahl, the grade absorbs the heat and manages typical chip formation, which reduces flank wear and extends service intervals. The result is fewer insert changes and more predictable component quality, supporting continuous, efficient production. Predictable chip control for reliable production The engineered RP4 chipbreaker delivers repeatable chip shaping across common cutting conditions, reducing the risk of tangling and improving swarf evacuation in drilling and boring operations. The triangular 60° form gives three indexed cutting edges per insert, enabling quick rotation to a fresh edge and lowering tooling costs per cutting length. These features together enable steady cycle times and minimise process interruptions on the shop floor. Compact geometry for flexible setup and process stability With a 16 mm size, T3 thickness and a 0.8 mm corner radius, the insert balances edge strength with accessibility in tighter toolholders. The nominal 7° clearance angle supports secure cutting geometry and stable engagement in turning and boring applications. Manufactured to tolerance class M, the insert ensures reproducible seating and repeatable cutting behaviour, which aids toolpath planning and reduces fixture adjustments during serial production. For high process reliability choose Walter Tools inserts supplied by Metav Werkzeuge — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability of the WPP10G grade and application parameters. Technical data SKU: TCMT16T308-RP4-WPP10G-WALTER Designation: TCMT16T308-RP4 WPP10G Product type: Drilling and boring indexable insert / turning indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Insert size: 16 Clearance angle: 7° Corner radius: 0.8 mm Insert thickness: T3 Insert shape: Triangle 60° Tolerance class: M Special features Grade: WPP10G (Tiger·tec Gold coated cemented carbide) Chipbreaker: RP4 Execution: T Material application: Stahl FAQ What materials is this insert suitable for? The insert is specified for machining Stahl; the WPP10G grade and Tiger·tec Gold technology are tuned to typical heat and chip behaviour when cutting Stahl. How does the RP4 chipbreaker affect performance? The RP4 chipbreaker shapes chips reliably to improve evacuation during drilling and turning, which helps maintain consistent cutting conditions and reduces downtime. How many cutting edges are available per insert? The triangular 60° geometry provides three indexable cutting edges, allowing quick rotation to a fresh edge and efficient use of the insert. Is this insert compatible with standard toolholders for TCMT geometry? The TCMT form follows common indexable insert standards; compatibility depends on the specific toolholder clamping and seat design—verify holder seating for TCMT16 geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
TCMT16T308-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust RP4 chipbreaker and a compact triangle geometry to achieve reliable steel machining and stable chip formation; order the TCMT16T308-RP4 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. TCMT16T308-RP4 TCMT16T308-RP4 WPP20G WPP20G — for Steel, Walter Tools TCMT16T308-RP4 WPP20G is a triangular turning and boring insert designed for steel machining, offering coated-carbide wear resistance and a chipbreaker tailored to predictable chip control Triangle 60° insert for versatile turning Tiger‑tec Gold coated grade WPP20G RP4 chipbreaker for reliable chip control 7° clearance and 0.8 mm corner radius Consistent performance for steel machining The combination of the Tiger‑tec Gold coating and the WPP20G cutting grade provides a balance between wear resistance and toughness that is optimised for steel (ISO group P). The coated carbide substrate reduces flank wear and extends edge life under the temperature and chip formation typical of steel turning, which leads to more consistent cycle times and fewer tool changes. The pressed triangular geometry contributes to a compact clamping footprint while still delivering repeatable cutting behaviour for general turning and light boring operations. Predictable chip control and secure cutting edge The RP4 chipbreaker is designed to shape and break chips reliably in a broad range of feed and depth-of-cut combinations, reducing the risk of long, entangling swarf. Combined with the 0.8 mm corner radius and 7° clearance, this insert offers a secure cutting edge that supports improved surface finish and edge stability. The triangular 60° form provides up to three indexable cutting positions per insert, which enhances productive tool utilisation without compromising rigidity or process security. Ready for productive workshop use and integration Suppliers and production planners will value the insert’s straightforward integration: the TCMT geometry matches common toolholder systems and the tolerance class M assures consistent interchangeability across batches. The T3 plate thickness and 16 mm nominal size balance stiffness with easy handling during tool preparation. For operations that expect rapid index changes and consistent results, this grade helps maintain throughput and reduces unexpected downtime by prolonging effective edge life. Material range and recommended applications This grade is specified for steels, including unalloyed and alloyed variants, and is particularly suited to typical steel turning tasks where a compromise between wear resistance and toughness is required. The coated carbide construction and the Tiger‑tec Gold technology are targeted at stable chip formation and reliable performance across varied steel substrate conditions. For best results, pair the insert with toolholders specified for TCMT triangular inserts and select cutting parameters that reflect the workpiece material, machine rigidity and cooling strategy. Contact Metav Werkzeuge today to discuss how the TCMT16T308-RP4 WPP20G can be matched to specific steel processing tasks or to request tailored cutting data Technical data Article number: TCMT16T308-RP4-WPP20G-WALTER Designation: TCMT16T308-RP4 WPP20G Grade: WPP20G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 mm Plate thickness: T3 Shape: Triangle 60° Tolerance class: M Special features Coating / material: coated carbide Chipbreaker: RP4 Application group: Steel (ISO P) Execution: T Material code: P (for steel) FAQ What materials is this insert designed for? The TCMT16T308-RP4 WPP20G is specified for steel machining (ISO group P), covering unalloyed and alloyed steels typically encountered in turning tasks. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on the WPP20G grade shapes chips for predictable breakage, improving swarf control and reducing the likelihood of entanglement during turning. How many indexable cutting edges are available per insert? The triangular 60° form provides three usable cutting positions, allowing cost-effective re-indexing and extended insert life. What advantages does the Tiger‑tec Gold technology offer? Tiger‑tec Gold coating enhances wear resistance while preserving edge robustness, which helps to maintain consistent cutting performance across variable steel conditions. Is the TCMT16T308-RP4 compatible with standard TCMT toolholders? Yes, the insert conforms to the TCMT geometry and tolerance class M for reliable fitment in matching toolholder systems. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanation purposes only; there is no connection between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TCMT16T308-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated performance, reliable RP4 chip control and robust 0.8 mm corner strength for efficient steel machining; order the inserts directly via Metav Werkzeuge or contact their advisers for application support. TCMT16T308-RP4 WPP30G triangular 60° indexable insert, Tiger·tec Gold, for steel — Walter Tools A durable TCMT16T308-RP4 WPP30G indexable insert engineered for turning and boring of steels, combining a coated carbide grade with a chipbreaker designed for productive machining. Tiger·tec Gold coating for long tool life Optimised RP4 chipbreaker for stable chips 60° triangular form for versatile turning applications 0.8 mm corner radius for precise edge strength Higher productivity through advanced coating and geometry The insert benefits from the Tiger·tec Gold technology and the WPP30G grade, a coated carbide designed specifically for steel (ISO P). This combination increases wear resistance and extends service life under typical turning conditions, which in turn reduces tooling changes and increases machining uptime. The geometry with a 7° relief angle and the tailored edge preparation supports consistent cutting behaviour, offering a measurable improvement in process stability and economic performance. Reliable chip control for uninterrupted production The RP4 chipbreaker is formulated to produce controlled, consistent chips when machining steel, reducing the risk of entanglement and machine stops. The 0.8 mm corner radius contributes to edge strength and repeatable cutting results, improving workpiece surface quality while preserving tool integrity during interrupted cuts. These design elements translate into fewer interruptions and a more predictable workflow on medium to heavy turning tasks. Straightforward integration and secure seating in toolholders With a 60° triangular shape and a nominal size of 16, the insert fits standard TCMT-style toolholder systems and is provided in tolerance class M for reliable seating and repeatability. The plate thickness (T3) and the TRI form ensure mechanical stability during high-feed operations. Being part of the Tiger·tec Gold series, the insert is aimed at applications where broad steel coverage and consistent tool life are priorities, making it suitable for batch production and mixed-series machining. For machining operations focused on steel, consult Metav Werkzeuge for application recommendations or order the TCMT16T308-RP4 WPP30G inserts via info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: TCMT16T308-RP4-WPP30G-WALTER Designation: TCMT16T308-RP4 WPP30G Manufacturer: Walter Tools Series: Tiger-tec Gold Core specifications Insert size: 16 Shape: Triangle 60° Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Grade: WPP30G Tolerance class: M Chipbreaker: RP4 Materials & special features Material: coated carbide (Hartmetall, beschichtet) Suitable for: steel (ISO P) Application focus: turning and boring indexable insert Series characteristics: wear-resistant, broad material coverage FAQ Is this insert suitable for machining steel? Yes. The TCMT16T308-RP4 WPP30G insert from Walter Tools is specifically designed for steel applications (ISO P) and delivers wear resistance suited to typical steel cutting conditions. What advantages does the WPP30G grade offer? WPP30G denotes a Walter Tools coated carbide grade within the Tiger·tec Gold family; it provides a balance of wear resistance and toughness that supports productive machining of unalloyed and alloyed steels. How does the RP4 chipbreaker improve performance? The RP4 chipbreaker is engineered to produce controlled chips during turning, which reduces interruptions and improves surface finish, contributing to a more stable machining process with fewer unplanned stops. Which toolholders are compatible with this insert form? The insert follows the TCMT designation and is intended for standard TCMT-style toolholders; the triangular 60° form and tolerance class M ensure reliable seating and repeatability in compatible holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any partnership between our company and the mentioned manufacturers. The offered item is original, brand-new factory merchandise.
TCMT16T312-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, reliable RK4 chip control and suitability for abrasive cast iron to improve process stability and reduce tool changes; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TCMT16T312-RK4 WKK10S indexable insert – Tiger‑tec Silver coated, for cast iron | Walter Tools A TCMT16T312-RK4 WKK10S triangular insert designed for turning and boring operations, optimised for abrasive cast iron machining with a robust RK4 chipbreaker and high‑performance Tiger‑tec Silver coating. Tiger‑tec Silver coated for extended life Optimised for cast iron machining RK4 chipbreaker for reliable chip control 7° clearance and 1.2 mm nose radius Consistent performance for abrasive workpieces The combination of a Tiger‑tec Silver coating with a coated carbide substrate ensures increased resistance to the abrasive wear typical of cast iron. The insert is supplied in the WKK10S grade, a Walter‑engineered composition that balances toughness and wear resistance for short, breaking chip forms. This results in fewer tool changes and a more predictable machining sequence, which contributes directly to improved throughput and reduced non‑productive time. Geometry designed for edge strength and surface quality The triangular 60° form with a 1.2 mm nose radius and a 7° clearance angle provides a stable cutting edge that withstands interrupted cuts and varying depths of cut. A larger nose radius supports higher feed rates during roughing while maintaining acceptable surface finish for semi‑finishing passes. Thanks to this geometry, the insert offers a practical compromise between component integrity and processing speed, with the RK4 chipbreaker assisting consistent chip segmentation. Process reliability and economical machining Because the grade and coating are tailored for cast iron, the insert delivers a predictable wear pattern and consistent cutting forces; this lowers the risk of unexpected edge failure. The TCMT16T312-RK4 WKK10S is particularly effective in operations where repeatability and minimal downtime are priorities. Machining cycles become more economical through extended edge life, reduced insert consumption and stable chip evacuation that supports automatic chip handling systems. Practical application and integration into toolholders The insert’s designation and dimensions match common triangular indexable holders used in turning and boring systems, allowing straightforward replacement and indexability during production runs. Its T3 thickness and 16 mm size make it suitable for a range of tool geometries where a compact, durable cutting edge is required. Selection of appropriate clamping and holder rigidity will further exploit the insert’s chip‑control characteristics and coating benefits, enhancing overall process security. Discuss specific application requirements with Metav Werkzeuge to confirm suitability of the Walter Tools TCMT16T312-RK4 WKK10S insert for intended cast‑iron operations or request tailored cutting recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT16T312-RK4-WKK10S-WALTER ISO designation: TCMT16T312-RK4 WKK10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Core specifications Clearance angle: 7° Nose radius: 1.2 mm Insert size: 16 mm Thickness: T3 Shape: Triangle 60° Tolerance class: M Features and applications Coating: Tiger‑tec Silver Substrate: coated carbide (hardmetal) Chipbreaker: RK4 Optimised for: cast iron machining Product type: turning/boring indexable insert FAQ Is this insert suitable for all types of cast iron? The TCMT16T312-RK4 WKK10S is optimised for a broad range of cast iron types according to its WKK10S composition, but specific grades of cast iron with unusual abrasiveness should be discussed with Metav Werkzeuge for tailored recommendations. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker on this insert promotes consistent chip segmentation when cutting cast iron, which supports reliable chip evacuation and reduces the likelihood of chip entanglement on the workpiece or toolholder. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases abrasive wear resistance and thermal stability, extending the effective life of the insert in demanding cast iron operations and maintaining dimensional consistency over longer runs. Can this insert be used for finishing passes? With its 1.2 mm nose radius and robust geometry, the insert can perform semi‑finishing tasks; final surface requirements should be validated under actual cutting conditions and with appropriate feed rates to achieve the desired finish. Which toolholders are compatible with this insert designation? The ISO designation TCMT16T312-RK4 corresponds to standard triangular indexable holders for turning and boring; compatibility with specific toolholders should be checked against holder manufacturer specifications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer Walter Tools.
TCMT16T312-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from reliable, productive cast iron machining thanks to the combination of the Tiger·tec Silver grade and the RK4 chipbreaker: efficient chip control, long wear life and consistent edge stability reduce downtime and improve process security. Order the insert directly via Metav Werkzeuge or consult the technical team for cutting data. TCMT16T312-RK4 WKK20S — triangular 60° indexable turning insert, 1.2 mm corner radius (Walter Tools) The TCMT16T312-RK4 WKK20S is a coated carbide triangular turning insert designed for cast iron applications, offering stable chip formation and high wear resistance for demanding roughing and medium-finishing operations. Tiger·tec Silver coating for wear resistance Optimised for cast iron (ISO K) Triangle 60° form for flexible indexing 1.2 mm corner radius for edge strength Consistent process security for abrasive cast iron turning The combination of the WKK20S coated-carbide grade and the Tiger·tec Silver technology is tailored to the abrasive nature of cast iron. The coating improves resistance to adhesive and abrasive wear while the substrate maintains fracture toughness, resulting in a longer effective tool life and predictable performance. The RK4 chipbreaker is specifically configured to handle short, brittle chips common with cast iron, reducing risk of built-up edge and improving machine uptime. This translates into fewer insert changes and steadier cycle times, which is crucial in 24/7 production environments. Geometry that balances strength and surface quality A triangular 60° plate form provides three usable cutting edges and straightforward indexing, supporting both productivity and economy. The 1.2 mm corner radius increases edge robustness, so the insert resists chipping during interrupted cuts or when taking heavier depths of cut. The 7° relief angle reduces rubbing on the flank and helps maintain dimensional accuracy over longer tool life. With a plate size of 16 mm and T3 thickness, the insert fits common turning toolholders while offering a compromise between rigidity and accessibility for intricate contours. Easy process integration and predictable results As an indexable insert, this design simplifies stocking and replacement compared with brazed or solid-carbide alternatives. The WKK20S grade delivers a predictable wear curve that supports consistent surface finish and repeatable component tolerances, making it suitable for batch production or single-part machining alike. The insert’s chip control and geometry reduce the need for extensive trial-and-error when setting cutting parameters; however, Metav Werkzeuge can supply recommended cutting data for specific machines and workpiece grades. The result is a robust, economical option for cast iron turning that aligns with modern production requirements. Contact Metav Werkzeuge to discuss Walter Tools TCMT16T312-RK4 WKK20S inserts, request tailored cutting parameters or arrange a quotation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: TCMT16T312-RK4-WKK20S-WALTER ISO designation: TCMT16T312-RK4 WKK20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Corner radius: 1.2 mm Relief angle: 7° Plate form: Triangle 60° Plate size: 16 mm Plate thickness: T3 Tolerance class: M Special features Grade/coating: WKK20S (Tiger·tec Silver) Chipbreaker: RK4 Material application: cast iron (ISO group K) Coated carbide Stable chip formation and wear resistance FAQ Which materials is this insert designed for? The TCMT16T312-RK4 WKK20S insert from Walter Tools is optimised for cast iron (ISO group K); the WKK20S grade and Tiger·tec Silver coating address the abrasive and short-chip characteristics of these materials. What advantages does the RK4 chipbreaker provide? The RK4 chipbreaker ensures controlled, short chips in cast iron turning, improving swarf evacuation and reducing the chance of built-up edge, which helps maintain consistent cutting forces and surface quality. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and resistance to chipping during interrupted cuts or heavier feeds, while still allowing acceptable surface finishes for roughing and semi-finishing operations with this insert type. Is this insert compatible with common turning toolholders? Yes, the TCMT16T312-RK4 WKK20S triangular insert is compatible with standard toolholders that accept TCMT inserts; its 60° form and 16 mm size support straightforward indexing and economical edge utilisation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
TCMT16T312-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a stable RM4 chipbreaker and a 1.2 mm corner radius for reliable machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our team for application support. TCMT16T312‑RM4 WSM20S triangular indexable insert — 1.2 mm radius, Tiger‑tec Silver, Walter Tools A TCMT16T312‑RM4 WSM20S indexable turning insert designed for machining stainless steels and heat‑resistant superalloys in both roughing and finishing operations Tiger‑tec Silver coated carbide Optimised RM4 chipbreaker Triangle 60° geometry Corner radius 1.2 mm Reliable performance for demanding materials The coated carbide grade WSM20S from the Tiger‑tec Silver family provides a balance of wear resistance and edge stability that benefits machining of stainless steels and heat‑resistant alloys. The coating and substrate combination promotes predictable wear patterns and reduces the risk of built‑up edge, which in turn helps to extend tool life and maintain component quality. For production environments where thermal load and material toughness challenge the cutting edge, this insert offers consistent results through enhanced heat resistance and improved chip evacuation. Consistent chip control and surface quality The RM4 chipbreaker geometry combined with the triangle 60° form ensures controlled chip formation and reliable evacuation under varying cutting conditions. A corner radius of 1.2 mm contributes to a robust cutting edge that reduces vibration and supports repeatable dimensional accuracy. The insert’s clearance angle of 7° is optimised for secure cutting action and reduced rubbing on the flank, which helps achieve a superior surface finish while maintaining feed rates appropriate for the task. In short, these design choices reduce rework and increase throughput in series production. Process security, tool life and integration into tooling systems Triangular inserts such as this one allow three usable cutting edges per index, supporting economic operation and predictable tool changes. The TCMT16T312‑RM4 WSM20S specification combines a practical insert size (16 mm) and standard thickness (T3) for easy integration into common turning holders. The coated grade is particularly resilient in heat‑generating applications, which translates into fewer tool interventions and higher machine uptime. For workshops seeking a robust, versatile consumable, the combination of geometry, coating and chip control makes this insert a sound choice for stable, efficient machining. Contact Metav Werkzeuge for tailored application advice or to request availability of the Walter Tools TCMT16T312‑RM4 WSM20S insert and compatible toolholders Technical Data Article number: TCMT16T312‑RM4‑WSM20S‑WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T312‑RM4 WSM20S Walter Tools Series: Tiger‑tec Silver Facts Insert size: 16 mm Corner radius: 1.2 mm Clearance angle: 7° Shape: Triangle 60° Thickness: T3 Special features Grade: WSM20S (coated carbide) Chipbreaker: RM4 Material suitability: stainless steels; heat‑resistant alloys (superalloys, titanium) Application: general turning, roughing and finishing depending on holder and parameters FAQ What materials is this insert suited for? The TCMT16T312‑RM4 WSM20S insert is designed for stainless steels and heat‑resistant superalloys, where the Tiger‑tec Silver grade supports stable cutting and heat resistance. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation and evacuation, improving surface finish consistency and reducing the likelihood of chip interference during machining with the Walter Tools insert. Can this insert be used for both roughing and finishing? Yes, depending on the holder, cutting parameters and depth of cut, the TCMT16T312‑RM4 WSM20S can be applied in roughing and finishing operations thanks to its 1.2 mm corner radius and coated substrate. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is original, factory‑new merchandise of the manufacturer.
TCMT16T312-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Combining the thermal stability of the Tiger‑tec Silver coating with the RM4 chipbreaker delivers reliable edge life and controlled chips in demanding operations; the 7° relief and 1.2 mm nose radius support consistent performance on stainless steels and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or consult the specialists for process recommendations. TCMT16T312-RM4 WSM30S – Triangular turning insert (Tiger‑tec Silver) for stainless steels and superalloys | Walter Tools The TCMT16T312-RM4 WSM30S is a triangular indexable turning insert engineered for secure chip control and durable cutting performance in applications on stainless steels, heat‑resistant superalloys and titanium. Tiger‑tec Silver coating for enhanced wear resistance WSM30S grade for stainless steels and superalloys RM4 chipbreaker for secure chip control 7° relief angle with 1.2 mm nose radius High wear resistance for demanding alloys The combination of the Tiger‑tec Silver coating and the WSM30S grade provides improved thermal stability and resistance to abrasive wear, which is particularly important when machining stainless steels and nickel‑based alloys. This engineered coating system supports stable cutting edges under elevated temperatures and reduces flank wear, enabling longer tool life and fewer indexings. The result is more predictable process windows and a lower frequency of tool changes, which benefits throughput in production environments. Secure chip control and consistent edge behaviour The RM4 chipbreaker is designed to ensure controlled chip formation during continuous turning, reducing the risk of long, entangling chips and improving surface finish consistency. The triangular 60° form combined with a 1.2 mm nose radius and 7° relief angle balances strength and precision: the geometry provides a robust cutting edge for medium to heavy cuts while maintaining the ability to achieve good surface quality. For shops aiming to minimise rework and machine downtime, this geometry supports repeatable performance and straightforward tool handling. Application guidance for productivity and process stability This insert is suitable for drilling/bore‑up and turning indexable applications where the workpiece materials fall into groups S and M (heat‑resistant superalloys/titanium and stainless steels). When paired with appropriate cutting parameters and a stable toolholder, the insert contributes to improved process security and consistent results. For best outcomes, align coolant strategy and feed/speed settings with the workpiece material class; tailored recommendations are available from technical advisors to help translate insert benefits into measurable productivity gains on the shop floor. Contact Metav Werkzeuge for tailored cutting strategies and prompt supply of Walter Tools inserts, including the TCMT16T312-RM4 WSM30S, and benefit from application advice and fast delivery. Technical Data Article number: TCMT16T312-RM4-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T312-RM4 WSM30S Walter Tools Manufacturer: Walter Tools Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WSM30S ISO designation: TCMT16T312-RM4 WSM30S Designation without grade: TCMT16T312-RM4 Facts Relief angle: 7° Nose/corner radius: 1.2 mm Inscribed circle / size: 16 mm Plate thickness: T3 Plate form: Triangular 60° Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: RM4 Material groups: S / M Suitable for: rostfreier Stahl and heat‑resistant superalloys Execution: T FAQ Which materials is this insert designed for? The TCMT16T312‑RM4 WSM30S by Walter Tools is formulated for stainless steels (material group M) and heat‑resistant superalloys or titanium (material group S) according to the stated grade characteristics. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the TCMT16T312‑RM4 WSM30S improves thermal stability and wear resistance, supporting longer cutting edge life and more consistent machining in elevated temperature conditions. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this triangular insert promotes controlled chip formation, which helps to avoid long chips and improves surface finish consistency during continuous turning operations. What are the key geometry specifications of this insert? The insert features a triangular 60° form, an inscribed circle of 16 mm, a corner radius of 1.2 mm, a relief angle of 7° and a thickness coded T3; these parameters define its balance between edge strength and finishing capability. Can this insert be used for both turning and bore‑up drilling operations? Yes, the product type indicates suitability for drilling/bore‑up indexable operations and turning, allowing use in multiple machining contexts when the correct holder and process parameters are applied. Manufacturer: Walter AG; Tübingen; Germany The Walter AG (brand: Walter Tools) is part of the Sandvik group and is recognised for precision tooling in metalworking. Protected trademarks and product names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any partnership or endorsement; the offered article is an original, factory‑new product of the manufacturer.
TCMT16T312-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and the RP4 chipbreaker for reliable chip control and extended edge life in steel turning applications; the robust 1.2 mm corner radius and triangular 60° form ensure stable cutting behaviour and easy indexing. Order the insert directly via Metav Werkzeuge or consult our specialists for machining advice. TCMT16T312-RP4 WPP10G — Triangular turning insert for steel (Walter Tools) The TCMT16T312-RP4 WPP10G is a triangular 60° turning insert optimised for ISO P (steel) machining, combining the Tiger·tec Gold coating with an RP4 chipbreaker to deliver consistent performance in production environments. Tiger·tec Gold coating for enhanced wear resistance RP4 chipbreaker for reliable chip control 1.2 mm corner radius for consistent cutting edge Triangle 60° form, 16 mm size, T3 thickness Longer tool life and consistent productivity for steel machining The combination of a Tiger·tec Gold coating and the WPP10G grade provides a durable, coated carbide solution designed specifically for the thermal and mechanical demands of machining steel. The coating reduces adhesion and flank wear, which translates into longer effective tool life and fewer interruptions in production. For workshop planners and production engineers, this means improved process stability and a better cost-per-cut balance when working with unalloyed and alloyed steels according to ISO P classifications. Predictable chip formation and surface quality through dedicated chip control The RP4 chipbreaker is engineered to manage chip flow reliably across a range of cutting conditions, promoting short, controllable chips and reducing the risk of entanglement or workpiece damage. Combined with the 1.2 mm corner radius, the insert supports a robust cutting edge that resists chipping and helps maintain a steady surface finish. Explaining the chipbreaker in practical terms: it shapes the chip to break and evacuate cleanly, which lowers machining interruptions and makes downstream handling and inspection simpler. Practical geometry and handling for efficient shopfloor use The triangular 60° geometry offers three usable cutting edges per index, increasing effective economy compared with single-edge solutions. The designation indicates a 16 mm inscribed circle and a T3 plate thickness, matching common toolholders for medium-duty turning tasks. The tolerance class M and the coated carbide construction ensure reproducible performance and reliable seating in standard toolholders. For selection, prioritise this insert where stable edge life, predictable chip control and straightforward indexing contribute directly to throughput and reproducibility. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools TCMT16T312-RP4 WPP10G inserts; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: TCMT16T312-RP4-WPP10G-WALTER SKU: TCMT16T312-RP4-WPP10G-WALTER Manufacturer: Walter Tools Product type: Turning insert (triangular) Grade: WPP10G Series: Tiger·tec Gold Core Data Free clearance angle: 7° Corner radius: 1.2 mm Inscribed circle / size: 16 mm Plate form: Triangle 60° Chipbreaker: RP4 Plate thickness: T3 Tolerance class: M Special features Coating technology: Tiger·tec Gold Coated carbide grade suitable for steel (ISO P) Designed for stable chip formation and high process security Three indexed cutting edges per insert Robust cutting edge for consistent surface quality Label / designation: TCMT16T312-RP4 WPP10G FAQ What materials is this insert suited for? The TCMT16T312-RP4 WPP10G is formulated for machining steel (ISO P); the Tiger·tec Gold coating and WPP10G grade address typical heat and chip characteristics of steel. How does the RP4 chipbreaker improve machining? The RP4 geometry promotes short, controlled chips and reliable evacuation, which reduces stoppages and supports a consistent surface finish when using the TCMT16T312-RP4 WPP10G insert. How many cutting edges are available per insert and how is the geometry useful? The triangular 60° form provides three indexed cutting edges, offering quick re-indexing and cost-effective utilisation in medium-duty turning operations. What advantages does the Tiger·tec Gold series offer for production use? Tiger·tec Gold-coated grades like WPP10G combine wear resistance and edge stability to extend tool life and support steady machining performance under commercial production cycles. The Walter AG (marketed as Walter Tools), headquartered in Tübingen, is a global provider of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. There is no affiliation between our company and the named brands; items offered are original, factory-new products of the manufacturer.
TCMT16T312-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Combining proven Tiger·tec Gold coating performance with precise geometry and controlled chip formation, the TCMT16T312-RP4 WPP20G delivers reliable productivity for serial turning and drilling operations on Stahl. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. TCMT16T312-RP4 WPP20G – indexable turning/drilling insert, for Stahl — Walter Tools The TCMT16T312-RP4 WPP20G is a 60° triangular, coated carbide indexable insert from the Tiger·tec Gold series, designed for robust turning and drilling tasks in general Stahl applications. Tiger·tec Gold coating for high productivity WPP20G coated carbide, universal for Stahl 60° triangular insert with 1.2 mm corner radius RP4 chipbreaker for controlled chip formation 7° relief angle, T3 plate thickness Consistent productivity through advanced grade and chip control The combination of the Tiger·tec Gold coating and the WPP20G grade provides a balance of wear resistance and toughness that is specifically tailored to Stahl machining. The coating reduces flank wear and improves heat resistance, while the RP4 chipbreaker ensures controlled chip formation across a wide range of cutting parameters. This results in fewer tool changes and a steadier production rhythm, helping to reduce cycle-time variability and increase overall process efficiency. Rigid geometry for reliable repeatability and surface quality The triangular 60° format with a 1.2 mm corner radius and a 7° relief angle delivers stable cutting edges and predictable engagement under intermittent loads. The insert’s T3 thickness enhances clamping rigidity, minimising chatter and improving dimensional repeatability. For applications where consistent surface finish and tight tolerances are required, this geometry supports stable cutting conditions and reduces secondary operations. Simple integration into existing tool systems and predictable tool life Designed as a direct replacement for standard TCMT-style holders, the insert is easy to index and fits common tooling systems, simplifying inventory and changeover. The coated carbide construction offers a reliable tool life profile for medium-duty turning and boring tasks in Stahl, leading to measurable cost advantages in batch production. The TCMT16T312-RP4 WPP20G pairs well with standard coolant strategies and is suitable for a range of feeds and speeds in everyday workshop environments. For application advice, availability and tailored recommendations for Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com • +49 2822 7131930; Metav Werkzeuge can advise on the best grade and chipbreaker for specific Stahl machining tasks Technical Data Article number: TCMT16T312-RP4-WPP20G-WALTER ISO designation: TCMT16T312-RP4 WPP20G Series: Tiger·tec Gold Brand: Walter Tools Facts Relief angle: 7° Corner radius: 1.2 mm Insert size: 16 mm Plate thickness: T3 Form: Triangle 60° Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide grade WPP20G) Chipbreaker: RP4 Execution: T Material suitability: Stahl Product type: indexable turning/drilling insert FAQ What materials is this insert suitable for? The TCMT16T312-RP4 WPP20G is specified for machining Stahl and is optimised for the heat and chip characteristics typical of these materials. How does the RP4 chipbreaker affect performance? The RP4 chipbreaker on the WPP20G grade provides reliable chip control and reduces the likelihood of long, stringy chips during turning and drilling with the TCMT16T312-RP4 insert. Can the insert be used in standard TCMT holders? Yes, the insert conforms to the TCMT geometry and can be integrated into common TCMT-style tool holders for straightforward replacement and indexing. What advantages does the Tiger·tec Gold coating offer? Tiger·tec Gold enhances wear resistance and thermal stability, delivering improved tool life and process security when machining Stahl with the TCMT16T312-RP4 WPP20G. Is the geometry suitable for finishing operations? The 1.2 mm corner radius and 60° triangular form provide a compromise between edge strength and surface quality, making the insert appropriate for medium-finish to finishing passes depending on machining parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com