TPGN160308 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a 60° triangular form and a 0.8 mm corner radius to achieve stable chip formation and consistent productivity in steel turning applications; order directly via Metav Werkzeuge or consult our specialists for cutting data and process integration. TPGN160308 WPP20G — indexable turning insert, Tiger·tec Gold, for steel | Walter Tools The TPGN160308 WPP20G is a triangular indexable turning insert engineered for steel machining, combining a coated carbide grade from the Tiger·tec Gold family with geometry optimised for repeatable performance. Tiger·tec Gold coated carbide for high productivity Designed for steel machining (ISO group P) 60° triangle shape with 0.8 mm corner radius 11° clearance angle for stable cutting performance Consistent performance for steel turning with reduced process risk The coated carbide grade from the Tiger·tec Gold family delivers a balance of wear resistance and toughness that is aimed specifically at steel applications (ISO group P). The insert’s geometry—a 60° triangle with a 0.8 mm corner radius—supports consistent cutting forces and reliable edge engagement, which reduces vibration and contributes to stable chip formation. For production environments that prioritise uptime and repeatability, this geometry helps to maintain surface finish quality and extend tool life, resulting in improved overall process efficiency. Coating and edge geometry that support higher machining rates The combination of a modern coating and the substrate’s mechanical properties creates an insert that resists abrasion while maintaining a robust cutting edge. The coated carbide composition is tailored to withstand the typical heat and chip formation encountered when machining unalloyed and alloyed steel, allowing operators to exploit more aggressive cutting parameters where process capability permits. The 11° clearance angle further assists by reducing rubbing on the flank face, lowering heat transfer to the insert and supporting consistent component tolerances under production loads. Practical application guidance for workshop integration Designed as a drop-in cutting edge for standard toolholders that accept the TPGN form, this insert simplifies inventory management thanks to its common triangular format and recognised ISO designation. The WPP20G grade is described as a universal-to-wear-resistant option within the Tiger·tec Gold series, making it suitable for a broad range of turning operations from general finishing to semi-roughing in steel. For selection support or to determine recommended cutting speeds, feeds and depths of cut for specific steels, Metav Werkzeuge can supply application sheets and advise on the best toolholder pairings to match shop requirements. Contact Metav Werkzeuge for application advice, cutting-parameter recommendations and to source Walter Tools Tiger·tec Gold inserts for reliable steel turning Technical Data Article number: TPGN160308-WPP20G-WALTER Designation: TPGN160308 SKU: TPGN160308-WPP20G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Grade/Sort: WPP20G Series: Tiger·tec Gold Facts Shape: Dreieck 60° Clearance angle: 11° Corner radius: 0.8 mm Insert size: 16 Thickness code: 03 Tolerance class: G Special features Coating / technology: Tiger·tec Gold Material: coated carbide Application group: Steel (ISO group P) Execution: N FAQ What materials is this insert best suited for? The insert is specified for steel machining (ISO group P); the WPP20G grade and Tiger·tec Gold technology are optimised for unalloyed and alloyed steels. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for improved tool life and helps achieve a more robust surface finish in turning operations, particularly under variable cutting conditions. Is the insert compatible with standard TPGN toolholders? Yes, the triangular form and ISO designation correspond to common toolholder interfaces for TPGN-style indexable turning inserts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT090204-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a dedicated WKK20S grade and the MK4 chipbreaker for reliable, productive cast iron turning; order or request application support via Metav Werkzeuge for a smooth integration into existing machining processes. TPGT090204-MK4 WKK20S turning indexable insert — Tiger‑tec Silver for cast iron (Walter Tools) A TPGT090204-MK4 WKK20S turning indexable insert optimised for productive and consistent machining of cast iron components in industrial turning applications. Tiger‑tec Silver coating for long tool life Optimised for cast iron machining MK4 chipbreaker for secure chip control Triangle 60° format with 0.4 mm radius Consistent, economical performance for cast iron turning The insert combines the WKK20S carbide grade with the Tiger‑tec Silver coating to deliver wear resistance tailored to abrasive cast iron conditions. The result is a stable cutting edge that extends tool life and reduces process interruptions, supporting higher cumulative cutting volumes and lower tool-change frequency. The triangular 60° format with a 0.4 mm corner radius provides a predictable cutting geometry that helps maintain dimensional stability on short to medium turning passes. These aspects make the insert particularly suitable for shops seeking cost-effective productivity improvements when machining grey and nodular cast iron. Secure chip control and reliable surface results Equipped with the MK4 chipbreaker and an 11° clearance angle, this insert promotes controlled chip formation and evacuation under typical cast iron cutting regimes. Controlled chips reduce re-cutting, protect the workpiece surface and help maintain coolant flow, which together contribute to improved surface integrity and repeatability. The insert’s geometry balances edge strength and sharpness, so finish and process security are enhanced without sacrificing productivity. For operations where consistent surface quality and reduced cycle variability matter, this insert supports more reliable downstream processing. Practical application guidance and process integration The insert is supplied in the common TPGT090204-MK4 format and integrates into standard triangular toolholder systems for turning. Its WKK20S composition is specifically matched to cast iron (ISO material group K), addressing the abrasiveness and short, brittle chips typical of these alloys. When replacing inserts, match the seat geometry and secure the clamping torque recommended by the toolholder manufacturer to preserve repeatable positioning. For high-volume or automated turning centres, the stable wear behaviour of the Tiger‑tec Silver coating reduces inspection intervals and contributes to predictable tooling costs over time. Contact Metav Werkzeuge today for tailored cutting data and to discuss how the Walter Tools Tiger‑tec Silver inserts can improve cast iron turning in production environments — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TPGT090204-MK4-WKK20S-WALTER SKU: TPGT090204-MK4-WKK20S-WALTER Designation: TPGT090204-MK4 WKK20S Product type: Turning indexable insert Brand: Walter Tools Facts Relief/clearance angle: 11° Corner radius: 0.4 mm Insert shape: Triangle 60° Insert size: 09 Chipbreaker: MK4 Grade/insert family: WKK20S, Tiger‑tec Silver Thickness code: 02 Tolerance class: G Execution code: T Special features Coating technology: Tiger‑tec Silver Carbide type: Coated cemented carbide (WKK20S) Application focus: Cast iron machining (ISO group K) Advantages: Optimised chip control, stable edge, wear resistance FAQ What materials is this insert intended for? The TPGT090204-MK4 WKK20S insert from Walter Tools is designed primarily for cast iron applications (ISO material group K), with the WKK20S grade tuned to the abrasive nature of these alloys. Which chipbreaker does the insert use and what benefit does it bring? This insert features the MK4 chipbreaker, which provides secure chip control and improved evacuation during turning, reducing recuts and supporting consistent surface quality. What are the key geometry specs to consider when setting up the toolholder? Key specifications include the 11° clearance angle, triangle 60° insert shape and a 0.4 mm corner radius; these determine seating, cutting line and expected finish when matched with the correct holder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for clarification purposes only; there is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
TPGT090204-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the MM4 chipbreaker for stable chip formation and consistent tool life. Order the TPGT090204-MM4 WSM01 directly via Metav Werkzeuge or contact the consultants for machining recommendations. TPGT090204-MM4 WSM01 indexable turning insert — Walter Tools, Triangle 60°, r0.4 TPGT090204-MM4 WSM01 is an indexable turning insert designed for challenging materials, especially rostfreier Stahl and heat‑resistant superalloys, delivering reliable chip control and durable cutting edges in serial production Tiger‑tec Silver coating for improved tool life MM4 chipbreaker for secure chip control Triangle 60° insert with 0.4 mm corner radius Optimised for rostfreier Stahl and superalloys Increased process efficiency through modern grade and coating The Tiger‑tec Silver series combines a modern coated carbide WSM01 grade with a geometry tailored to heavy cutting conditions. This composition provides a consistent cutting edge and reduced wear when machining high‑toughness materials such as rostfreier Stahl, where heat and adhesion tend to shorten insert life. By favouring thermal stability and controlled abrasion resistance, the grade reduces the frequency of tool changes, supporting uninterrupted production runs and improving overall cost efficiency. The coated carbide construction also contributes to a more predictable tool life and repeatable results across batches. Geometry engineered for chip control and surface quality A triangular 60° shape paired with the MM4 chipbreaker ensures reliable chip formation and evacuation in difficult‑to‑machine alloys. The 0.4 mm corner radius and 11° rake angle deliver a balance between robustness and finish: the nose radius supports stable cutting forces while the rake angle reduces the tendency for built‑up edge. Together, these features lower the risk of chatter and improve surface finish on the component, translating into fewer rework cycles and shorter cycle times. The geometry is engineered to maintain edge stability under thermal and mechanical stress, which is particularly beneficial in longer tool paths. Practical application advantages and recommended use cases This indexable insert is suitable for turning operations on rostfreier Stahl as well as for machining heat‑resistant superalloys and titanium where standard grades struggle. The WSM01 coated carbide supports secure chip control and is optimised for applications that demand both dimensional accuracy and consistent tool life. In practice, the design reduces downtime related to chip jams and edge failure, and it is well‑suited for both roughing passes that require edge robustness and light finishing where a good surface is required. For process integration, consider pairing the insert with stable tooling and appropriate coolant strategies to maximise the grade’s advantages. Contact Metav Werkzeuge today for tailored recommendations on integrating Walter Tools Tiger‑tec Silver inserts into production workflows and to request application‑specific cutting data Technical data SKU: TPGT090204-MM4-WSM01-WALTER Designation: TPGT090204-MM4 WSM01 Manufacturer: Walter Tools Product type: Indexable turning insert Facts Free angle: 11° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 09 Insert thickness: 02 Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Tolerance class: G Material suitability: S / M (rostfreier Stahl; heat‑resistant superalloys and titanium) FAQ What materials is this insert designed for? The TPGT090204-MM4 WSM01 insert from Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups S and M), offering secure chip control and edge stability in these materials. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker on the Walter Tools TPGT090204-MM4 WSM01 promotes predictable chip formation and reliable evacuation, which reduces the risk of chip entanglement and supports continuous cutting at higher process reliability. Can the insert be used for roughing and finishing? Yes, the geometry and 0.4 mm corner radius of the TPGT090204-MM4 WSM01 make it suitable for both robust roughing passes and light finishing operations, balancing strength and surface quality. What advantage does Tiger‑tec Silver bring to the tool life? The Tiger‑tec Silver series provides a modern coated carbide structure that enhances thermal stability and wear resistance, allowing the TPGT090204-MM4 WSM01 to maintain cutting performance over extended production runs. Is the insert compatible with standard triangular toolholders? The TPGT090204-MM4 WSM01 is an industry‑standard triangular 60° insert intended for compatible indexable turning toolholders; selection of the correct clamping seat and screw is required for secure mounting. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT090204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a wear‑resistant grade and precise chip control for longer tool life and consistent turning performance; order directly via Metav Werkzeuge or consult the experts for application guidance. TPGT090204-MP4 WPP20G indexable turning insert by Walter Tools — Tiger·tec Gold grade, MP4 chipbreaker for steel The TPGT090204-MP4 WPP20G is a triangular indexable insert designed for turning applications in steel, offering a coated‑carbide grade for extended tool life and reliable machining results Tiger‑tec Gold coated carbide for steel MP4 chipbreaker for reliable chip control Triangular 60° insert with 0.4 mm corner 11° relief angle for stable cutting performance Durable, high‑productivity grade for steel machining The insert’s Tiger·tec Gold grade WPP20G is a coated‑carbide technology tailored to steel machining (ISO group P). Its engineered coating and substrate combination deliver improved wear resistance and predictable edge stability, which translates into fewer tool changes and reduced production interruptions. For shops aiming at cost efficiency, the result is a lower cost per part because the cutting edge maintains geometry longer under typical steel cutting temperatures and chip loads. Controlled chips and improved surface finish with MP4 Thanks to the MP4 chipbreaker and an 11° relief angle, this insert provides consistent chip formation and evacuation during turning operations. The controlled chips reduce the risk of entanglement and help preserve the machined surface, leading to fewer secondary operations. The combination of the chipbreaker geometry and a 0.4 mm corner radius supports stable finishing passes where dimensional accuracy and surface quality are important. Compact triangular geometry for versatile turning tasks The triangular 60° shape offers multiple indexable edges per insert, which increases productivity through simple indexation. The designation TPGT090204-MP4 denotes a compact format that suits a variety of common turning set‑ups; the small corner radius is particularly effective for finishing and light profiling where a fine radius is required. The insert’s geometry ensures good seat contact and rigidity, supporting reproducible results across batches and consistent cycle times. Compatibility, procurement and application advice The insert is supplied in the Walter Tools Tiger·tec Gold series as grade WPP20G, optimised for general steel applications including unalloyed and alloyed steels. For customers seeking confirmation of fitment in specific toolholders or to obtain cutting data for particular steel grades, Metav Werkzeuge provides technical assistance and data sheets. For complex part geometries or mixed‑material production, an expert consultation ensures the selected insert meets process targets and cycle‑time expectations. For tailored recommendations or to request a delivery for the TPGT090204-MP4 WPP20G by Walter Tools, contact Metav Werkzeuge for detailed machining data and fast handling: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TPGT090204-MP4-WPP20G-WALTER Product: Drehwendeschneidplatte TPGT090204-MP4 WPP20G Walter Tools Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Plate form: Triangular 60° Size designation: 09 Thickness code: 02 Special features Grade: WPP20G (Tiger·tec Gold) Coating: coated carbide Chipbreaker: MP4 Suitable material group: Steel (P) Tolerance class: G FAQ What materials is this insert suitable for? The TPGT090204-MP4 WPP20G is specified for steel (ISO group P) and is engineered to handle the heat and chip characteristics of unalloyed and alloyed steels. How does the MP4 chipbreaker affect chip formation? The MP4 chipbreaker on this Walter Tools insert shapes short, controllable chips for turning, improving evacuation and reducing the likelihood of surface damage from long, stringy chips. What advantage does the Tiger·tec Gold grade provide? Tiger·tec Gold (WPP20G) combines a coated surface with a robust substrate to increase wear resistance and maintain a stable cutting edge, resulting in longer tool life and consistent part quality. How many usable edges does the triangular insert offer? The triangular 60° geometry provides multiple indexable cutting edges; indexation restores a fresh edge quickly, supporting efficient machining cycles. Is this insert suitable for finishing cuts? With a 0.4 mm corner radius and the MP4 chipbreaker, the insert is well suited to finishing and light profiling where surface quality and dimensional control are required. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of a globally recognised tool group and ranks among leading manufacturers of precision cutting tools. Protected trademarks and product names mentioned are the property of their respective owners and are cited here for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners beyond the sale of original, factory‑new products.
TPGT110204-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver grade, the MM4 chipbreaker and an 11° clearance angle for secure chip control and a stable cutting edge in demanding materials; order the insert directly via Metav Werkzeuge or consult our application specialists for cutting data and process recommendations. TPGT110204-MM4 WSM01 – indexable turning insert, Tiger‑tec Silver, MM4 chipbreaker (Walter Tools) A TPGT110204-MM4 WSM01 indexable turning insert engineered for heavy-duty turning of rostfreier Stahl and heat‑resistant superalloys, featuring a triangle 60° form and an 11° clearance angle for reliable machining performance. Tiger‑tec Silver coating for process security WSM01 grade for heat‑resistant alloys and rostfreier Stahl MM4 chipbreaker for consistent chip control Triangle 60° shape for versatile turning applications High process reliability from the grade and geometry The combination of the Tiger‑tec Silver series and the WSM01 grade provides enhanced wear resistance and stable edge life when machining demanding materials. The coated carbide composition reduces flank wear and supports a stable cutting edge, which translates into fewer tool changes and improved throughput. The triangular 60° form yields three effective cutting corners per indexable insert, increasing tool utilisation while the MM4 chipbreaker promotes predictable chip formation for continuous turning operations. Precise cutting behaviour and material suitability explained An 11° clearance angle and a corner radius of 0.4 mm control cutting forces and surface integrity, especially in materials that tend to work‑harden or generate heat. The grade is specified for machining rostfreier Stahl (M) and high‑temperature superalloys/titanium (S), which are difficult to cut due to poor thermal conductivity and high strength; the WSM01 chemistry is tailored to resist crater and flank wear under such conditions. The MM4 chipbreaker is designed to break chips into manageable segments, lowering the risk of re‑cutting and improving component finish. Efficiency, economy and support for production environments Adopting these inserts in production brings concrete efficiency gains: longer tool life, reduced downtime for tool changes and more consistent component quality. The insert’s geometry and grade support stable machining windows, enabling higher feed rates in many turning tasks without compromising surface finish. For production planners and shopfloor engineers, the result is better reproducibility and a clearer cost‑benefit through fewer interruptions and predictable tool performance. Contact Metav Werkzeuge today for tailored cutting data and application advice on the Walter Tools Tiger‑tec Silver TPGT110204‑MM4 WSM01 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TPGT110204-MM4-WSM01-WALTER Designation: TPGT110204-MM4 WSM01 Data Clearance angle: 11° Corner radius: 0.4 mm Inscribed circle / size: 11 mm Thickness code: 02 Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Shape: Triangle 60° Material suitability: rostfreier Stahl; superalloys and titanium FAQ What materials is this insert suitable for? The TPGT110204‑MM4 WSM01 is designed for rostfreier Stahl (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), with the WSM01 grade offering thermal and edge stability for these materials. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this Walter Tools insert promotes consistent chip separation, improving chip evacuation and reducing the chance of entanglement, which helps maintain surface quality and tool life. What benefits does the Tiger‑tec Silver series provide? The Tiger‑tec Silver series supplies a robust coating that enhances wear resistance and process reliability, enabling more stable cutting conditions and longer intervals between tool changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT110204-MM4 WSM20S MM4 Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM20S grade delivers dependable wear resistance and secure chip control for challenging materials, while the compact triangular geometry and 0.4 mm nose radius support consistent surface finish and tool life; order the TPGT110204-MM4 WSM20S indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT110204-MM4 WSM20S indexable turning insert — Triangle 60°, Tiger·tec Silver for stainless and superalloys | Walter Tools TPGT110204-MM4 WSM20S is an indexable turning insert engineered for stable machining of stainless steels and heat‑resistant superalloys, combining a robust chipbreaker and precision geometry for demanding turning operations. Tiger·tec Silver coated carbide grade WSM20S 60° triangle with 0.4 mm nose radius 11° clearance angle for secure cutting MM4 chipbreaker for stable chip control High-performance grade for difficult-to-machine alloys The insert uses the WSM20S coated‑carbide grade from the Tiger·tec Silver series, optimised for workpiece groups M and S according to ISO classification. This composition emphasises thermal resistance and edge stability, which reduces the tendency for built‑up edge when machining stainless steels and nickel‑based superalloys. In production terms, the result is longer intervals between index changes and fewer unscheduled tool‑related interruptions, supporting a smoother machining cycle and predictable output. Geometry that improves surface quality and tool life A triangular 60° form with a 0.4 mm nose radius and an 11° clearance angle balances strength and accessibility for a range of turning profiles. The compact nose radius contributes to acceptable surface finish on small radii without sacrificing edge strength, while the clearance angle reduces rubbing and heat build‑up behind the cutting edge. Combined with the MM4 chipbreaker, the geometry encourages short, controllable chips and consistent edge wear, which helps maintain dimensional accuracy over extended runs. Practical benefits for workshop efficiency As an indexable insert designed for production environments, this grade supports higher process security and repeatability. The coated substrate improves resistance to abrasion and thermal cycling, lowering the frequency of insert changes and supporting better overall tool‑cost efficiency. Where component quality and cycle stability are priorities, the insert offers a practical compromise between aggressive metal removal rates and reliable surface integrity, reducing secondary rework and enhancing throughput. Material guidance and application notes The insert is specified for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), reflecting the grade’s focus on heat tolerance and edge preservation. For general turning tasks in these groups, choose cutting parameters and coolant strategies that favour steady heat removal; the grade and chipbreaker are tuned to assist with secure chip formation under such conditions. For unfamiliar applications, technical consultation is available to align insert choice with machine capability and component tolerance requirements. For application advice or to secure the Walter Tools TPGT110204-MM4 WSM20S for production use, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data SKU: TPGT110204-MM4-WSM20S-WALTER Product: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Core specifications Clearance angle: 11° Nose radius: 0.4 mm Insert size: 11 mm Thickness designation: 02 Geometry: Triangle 60° Chipbreaker: MM4 Tolerance class: G Materials & special features Series / coating: Tiger·tec Silver Grade: WSM20S Material suitability: stainless steels (M), superalloys and titanium (S) Execution: T Plate form: triangular 60° Application focus: secure chip control and edge stability FAQ What materials is this insert best suited for? The TPGT110204-MM4 WSM20S indexable turning insert is intended for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where its Tiger·tec Silver coating and carbide grade support thermal resistance and stable cutting edges. How does the MM4 chipbreaker help in practice? The MM4 chipbreaker on this triangular insert promotes short, consistent chips that are easier to evacuate, reducing the risk of entanglement and helping to maintain a stable cutting edge when machining tough alloys with the TPGT110204-MM4 WSM20S. What advantages does the 0.4 mm nose radius provide? A 0.4 mm nose radius delivers a compromise between edge strength and fine surface finish, permitting accurate profiling while keeping the cutting edge robust enough for interrupted or heavier turning passes. Is this insert compatible with standard toolholders? The insert’s triangular 60° form and standard designation match conventional indexable turning toolholders designed for this ISO geometry; ensure the clamping pocket and insert seat correspond to the TPGT format. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
TPGT110204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, long tool life and consistent chip control for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our advisors for application support. TPGT110204-MP4 WPP20G turning insert, Tiger·tec Gold, for steel (60° triangle) – Walter Tools The TPGT110204-MP4 WPP20G is a coated carbide indexable turning insert engineered for ISO P applications, providing balanced wear resistance and toughness for reliable steel machining. Tiger·tec Gold coated carbide grade WPP20G 60° triangle with 0.4 mm corner radius Optimised for steel machining with 11° clearance Consistent performance through advanced coating and grade The Tiger·tec Gold coating combined with the WPP20G grade delivers a deliberate balance between wear resistance and toughness, designed to extend service intervals and reduce process variations. As a coated carbide solution, this insert manages the thermal and mechanical stresses common in steel turning, enabling higher cutting speeds where appropriate and improving tool life. The result is predictable removal rates and fewer unscheduled tool changes, which supports continuous production. Reliable chip control and geometry for cleaner cuts Equipped with the MP4 chipbreaker and a 60° triangular form, this indexable insert promotes effective chip formation and evacuation in typical steel work. The 11° clearance reduces rubbing on the flank, lowering heat build-up and improving surface quality. With a 0.4 mm corner radius, the geometry helps achieve a balance between edge strength and finished surface integrity, making it suitable for a range of finishing and light roughing operations on steel. Practical geometry for economical tool usage The triangular plate geometry provides multiple usable edges, increasing the number of indexings per insert and improving cost-efficiency in serial production. The insert dimensions (size 11, thickness 02) and tolerance class G ensure predictable seating and repeatable accuracy in standard toolholders. As an indexable turning insert, it is straightforward to replace and re-index, shortening downtime and simplifying inventory management for workshop operations. Productivity benefits and material suitability Specifically tailored for ISO P materials, the TPGT110204-MP4 WPP20G supports stable cutting in a wide range of steels. The combination of a robust substrate and the Tiger·tec Gold coating enhances edge life under typical turning loads, contributing to lower unit costs and improved surface finishes. Use of this insert helps maintain consistent part quality and reduces the need for frequent regrinding or tool reconditioning. For reliable steel turning with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TPGT110204-MP4-WPP20G-WALTER Name: Drehwendeschneidplatte TPGT110204-MP4 WPP20G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 0.4 mm Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WPP20G Coating: coated carbide Chipbreaker: MP4 Material application: Steel (ISO P) Execution: T FAQ What materials is this insert suited for? This insert is intended for ISO P applications and is optimised for turning various steels; the WPP20G grade supports typical steel machining scenarios. How does the MP4 chipbreaker affect performance? The MP4 chipbreaker on the TPGT110204-MP4 WPP20G promotes controlled chip formation and evacuation, improving surface finish and reducing risk of built-up edge when machining steel. What are the key geometrical specifications to check before mounting? Check the 60° triangular shape, 0.4 mm corner radius, 11° clearance and the plate dimensions (size 11, thickness 02) to ensure compatibility with the toolholder and the intended cutting application. Is this insert suitable for finishing and light roughing? Yes, the combination of the WPP20G grade and the modest corner radius makes the insert appropriate for both finishing and light roughing passes on steel. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating increases resistance to wear and thermal loads, which extends tool life and supports higher process stability during steel turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product from the stated manufacturer.
TPGT110208-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Taking advantage of high process stability and targeted chip control, this insert combines the Tiger‑tec Silver coating with the WKK20S grade for durable performance in cast‑iron machining; its MK4 chipbreaker and 0.8 mm corner radius ensure repeatable surface quality. Order the TPGT110208‑MK4 WKK20S insert directly via Metav Werkzeuge or consult our specialists for application support. TPGT110208‑MK4 WKK20S – triangular turning insert for cast iron (Tiger‑tec Silver) by Walter Tools TPGT110208‑MK4 WKK20S is a triangular 60° indexable insert designed for productive turning of cast iron components, delivering stable cutting performance and long tool life. Tiger‑tec Silver coating for long tool life Optimised MK4 chipbreaker for cast iron Triangle 60° insert, 0.8 mm corner radius 11° clearance angle, precise chip control Greater productivity through targeted coating and grade The combination of the Tiger‑tec Silver coating with the WKK20S carbide grade is optimised for abrasive cast‑iron workpieces. The coating reduces wear on the cutting edge and extends tool life, which translates into fewer insert changes and less downtime. For production environments this means more consistent cycle times and a clearer calculation of tooling costs. The grade and coating pairing is tuned to moderate toughness and high abrasion resistance, making the insert especially suited to interrupted cuts and unstable chip forms common in grey and nodular cast iron. Reliable chip control and consistent surface results The MK4 chipbreaker is engineered to control short, breaking chips typical of cast‑iron machining, promoting safe chip evacuation and reducing rework. The triangle 60° geometry offers three usable cutting edges per insert, improving cost‑efficiency, while the 0.8 mm corner radius balances edge strength and surface finish. The 11° clearance angle supports low rubbing and stable cutting engagement. Together these features result in improved surface integrity and predictable tool behaviour, which is particularly valuable when repeatability and part quality are critical. Clear selection and practical application guidance Selection of an insert from the ISO‑style designation is straightforward: the marking identifies geometry, chipbreaker and size so that the insert matches the corresponding toolholder. The TPGT110208‑MK4 code indicates a triangular insert with an MK4 chipbreaker and the specific geometry required for precise seating in standard holders. As a cast‑iron‑focused solution, the insert is intended for components where abrasive wear governs tool life; matching the grade and coating to the workpiece group avoids premature edge failure. For best results, pair the insert with a rigid setup and consistent coolant or dry‑cutting strategy suited to the casting grade. Process benefits and workshop integration Integrating this indexable insert into production delivers measurable benefits: reduced tooling frequency, stable cutting edges and improved productivity on cast‑iron parts. The robust design supports repeatable machining and simplified tool inventory management, as the triangle form offers multiple edges per insert. For engineers and buyers, the predictable performance reduces planning margin and supports tighter tolerances without increasing machining risk. The insert’s compatibility with standard triangular toolholders facilitates swift implementation on existing turning centres. For Walter Tools Tiger‑tec Silver inserts such as the TPGT110208‑MK4 WKK20S, contact Metav Werkzeuge for availability and cutting recommendations: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TPGT110208‑MK4‑WKK20S‑WALTER Product: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Grade: WKK20S Series: Tiger‑tec Silver Core specifications Clearance angle: 11° Corner radius: 0.8 mm Insert shape: Triangle 60° Inscribed circle / size: 11 mm Thickness: 2.0 mm Chipbreaker: MK4 Special features Coating: Tiger‑tec Silver (coated carbide) Material application: Cast iron (group K) Tolerance class: G Execution: T ISO designation: TPGT110208‑MK4 WKK20S FAQ What materials is this insert intended for? The TPGT110208‑MK4 WKK20S insert is intended primarily for cast‑iron machining; the WKK20S grade and Tiger‑tec Silver coating are optimised for abrasive cast‑iron conditions. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker produces short, controllable chips in cast‑iron turning, improving chip evacuation and reducing the risk of entanglement or surface damage. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting edges per insert, which improves cost‑efficiency in the workshop. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT16T304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
The WSM01 grade supplies dependable wear resistance and stable chip formation, supporting consistent component quality in demanding turning operations; combined with the Tiger‑tec Silver series and a 0.4 mm corner radius, the insert promotes longer tool life and fewer tool changes. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TPGT16T304‑MM4 WSM01 — indexable turning insert for stainless steels & superalloys, Walter Tools TPGT16T304‑MM4 WSM01 is a triangular 60° indexable insert from the Tiger‑tec Silver series, designed for productive turning of stainless steels, heat‑resistant superalloys and titanium. Tiger‑tec Silver series for enhanced wear resistance Grade WSM01 optimised for stainless & superalloys 11° clearance angle for secure cutting geometry Triangle 60° form with 0.4 mm corner radius Longer edge life for continuous production The combination of the WSM01 grade and the Tiger‑tec Silver series offers a clear advantage where sustained tool life matters. The coated carbide grade is engineered for stable chip formation and resistance to abrasive wear when machining tough materials; this reduces unexpected interruptions and supports steady production output. For machining centres and turning cells, the result is predictable tool change intervals and a lower rate of rework — a practical benefit for continuous, high‑mix operations. Predictable cutting geometry for consistent surface quality The triangular 60° geometry and a 0.4 mm corner radius deliver a reliable cutting edge that balances strength and surface finishing capability. The 11° clearance angle preserves the cutting geometry under load and helps maintain dimensional accuracy across the workpiece. These design choices mean fewer adjustments are required on the lathe and a reduced risk of chatter when the insert is used in suitable toolholders, translating into consistent component surfaces and less downstream polishing or dressing. Material suitability and application clarity This insert is specified for material groups S and M: S covers heat‑resistant superalloys and titanium, while M refers to stainless steels. These workpiece families generate high cutting temperatures and demand a grade that supports heat resistance and edge stability. The MM4 chipbreaker assists controlled chip formation in those conditions, improving process safety and lowering the likelihood of built‑up edge. For workshops handling aerospace, power‑generation or medical components, the geometry and grade combination facilitates reliable machining of demanding alloys. Integration into the machining process and technical support The insert’s execution and tolerance class support straightforward implementation into existing tool assemblies that accept triangular inserts. Operational advantages include repeatable seating, simplified inventory management through a clear ISO designation and fewer unexpected tool failures thanks to the grade’s thermal stability. For additional technical parameters or application‑specific recommendations, the Metav Werkzeuge technical team is available to provide machining guidance and verify suitability for particular turning tasks — contact details are provided below for prompt support. Contact Metav Werkzeuge for availability of Walter Tools Tiger‑tec Silver inserts and tailored application advice Technical details SKU: TPGT16T304-MM4-WSM01-WALTER Designation: TPGT16T304-MM4 WSM01 Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: MM4 Execution: T Core measurements Clearance angle: 11° Corner radius: 0.4 mm Plate size: 16 mm Plate form: Triangle 60° Thickness: T3 Tolerance class: G Materials & special features Material suitability: S / M (superalloys/titanium; stainless steels) Suitable for: stainless steels (M) Chip control: MM4 designed for secure chip formation Series characteristics: Tiger‑tec Silver — wear‑resistant coated carbide FAQ What materials is this insert suitable for? The WSM01 grade insert from Walter Tools is suitable for stainless steels (M) and heat‑resistant superalloys and titanium (S) according to its S / M designation; the Tiger‑tec Silver series supports thermal and abrasive loads typical for these materials. What is the corner radius and how does it affect the finish? The insert has a 0.4 mm corner radius, which offers a compromise between edge strength and surface finish — smaller radii yield finer finishes, while the 0.4 mm radius improves edge robustness in interrupted cuts. Which geometry and chipbreaker are included? The component features a triangle 60° form with an 11° clearance angle and the MM4 chipbreaker, a combination intended for secure chip control and predictable cutting behaviour in demanding alloys. Is the grade suitable for high‑temperature alloys such as Inconel or titanium? Yes, the WSM01 grade and Tiger‑tec Silver series are tailored for S materials — heat‑resistant superalloys and titanium — providing improved wear resistance and stable cutting edges under high thermal stress. Is this insert more appropriate for finishing or roughing operations? The 0.4 mm corner radius and the geometry make the insert versatile; it can be used for light finishing passes where a good surface is required and for moderate roughing when edge strength and chip control are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer. The Walter Tools brand is used where it applies.
TPGT16T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM20S grade together with the MM4 chipbreaker for robust, predictable performance on demanding materials; the 0.4 mm corner radius and 11° relief support edge strength and surface finish. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. TPGT16T304‑MM4 WSM20S indexable turning insert, Tiger‑tec Silver, for rostfreier Stahl and superalloys — Walter Tools The TPGT16T304‑MM4 WSM20S is an indexable turning insert designed for high‑duty machining of rostfreier Stahl and heat‑resistant superalloys and titanium, combining a coated carbide grade with a triangle 60° form for versatile turning tasks Tiger‑tec Silver coated carbide Grade WSM20S for tough materials MM4 chipbreaker for stable chips Triangle 60° with 0.4 mm radius Reliable cutting performance for demanding materials The WSM20S carbide grade, part of the Tiger‑tec Silver family, is developed for machining applications where material toughness and heat generation are relevant factors. Designed for rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), the cutting grade promotes repeatable cutting behaviour and prolonged edge life. This results in fewer unexpected tool changes and a more consistent production output when machining difficult alloys. Geometry and edge integrity that support surface finish The triangular 60° form and 0.4 mm corner radius contribute to a robust cutting edge that balances strength with the potential for fine surface quality. The insert’s 11° relief helps control contact geometry between tool and workpiece, which can reduce rubbing and improve thermal stability at the cutting zone. Together, these geometric details enable steady feeds and predictable workpiece finish on interrupted and continuous turning operations. Chip control and process stability with MM4 The integrated MM4 chipbreaker is tuned to provide controlled chip formation across a range of feeds and depths of cut. Stable chips reduce the risk of re‑cutting, protect the cutting edge and simplify chip handling in the workplace. For process planners, this translates into improved machining reliability and easier downstream handling, particularly when working with materials that tend to form long, stringy chips. Compatibility, handling and selection guidance The insert is supplied in the T‑thickness designation (T3) and is compatible with toolholders designed for triangle 60° indexable inserts. Selection should match workpiece material, cutting conditions and machine capability; when cutting rostfreier Stahl or superalloys, opt for parameters that support continuous chip evacuation and moderate cutting temperatures. For quick identification, the insert is marked with the TPGT16T304‑MM4 WSM20S designation and belongs to the Tiger‑tec Silver series by Walter Tools. For application support or to secure Walter Tools Tiger‑tec Silver inserts for rostfreier Stahl and superalloy turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants provide practical machining advice and product availability information. Technical data Article number: TPGT16T304‑MM4‑WSM20S‑WALTER Designation: TPGT16T304‑MM4 Grade: WSM20S Series: Tiger‑tec Silver Brand: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Insert size: 16 mm Plate form: triangle 60° Thickness: T3 Tolerance class: G Special features Chipbreaker: MM4 Coating: Tiger‑tec Silver (coated carbide) Material applicability: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) Execution: T FAQ Which materials is this insert suited for? The TPGT16T304‑MM4 WSM20S insert from Walter Tools is intended for rostfreier Stahl and for heat‑resistant superalloys and titanium (ISO groups M and S), offering a balance of thermal and edge stability for these materials. What benefit does the MM4 chipbreaker provide? The MM4 chipbreaker on this insert promotes controlled chip formation, which enhances process stability and reduces the incidence of long, entangling chips during turning with the Walter Tools grade. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius strengthens the cutting edge and supports improved surface finish under suitable feeds, helping to resist edge chipping on tougher materials. Is the insert compatible with standard triangular holders? Yes; the triangle 60° form and T3 thickness make this insert compatible with toolholders designed for 60° triangular turning inserts; selection should verify holder seat and clamping geometry. What information helps choose cutting parameters for rostfreier Stahl? When machining rostfreier Stahl with this Walter Tools grade, prioritise stable chip evacuation, adequate coolant use where applicable and cutting speeds and feeds that limit built‑up edge while preserving tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Trademarks and product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.
TPGT16T304-MP4 WPP20G Wendeplatten - Walter Tools
Combine long tool life from the Tiger·tec Gold coating with the controlled chips of the MP4 breaker and the stable triangular geometry for efficient steel turning. Take advantage of this performance for continuous production and order the insert directly via Metav Werkzeuge or consult their specialists for application advice. TPGT16T304-MP4 WPP20G Turning Indexable Insert – Steel, Tiger·tec Gold | Walter Tools The TPGT16T304-MP4 WPP20G is a triangular turning indexable insert designed for versatile steel machining, combining Tiger·tec Gold coating with an MP4 chipbreaker for reliable, productive cutting. Tiger·tec Gold coating for long tool life MP4 chipbreaker for controlled chip formation Triangular 60° insert with 0.4 mm nose radius Optimised for steel machining with tolerance class G High productivity through wear-resistant grade and coating The insert uses the WPP20G grade within the Tiger·tec Gold series to deliver a balance of wear resistance and toughness that suits a wide range of steel turning tasks. This coated cemented carbide composition reduces flank wear and maintains edge integrity under the higher temperatures typical of steel cutting. The result is longer tool life and fewer indexings, which translates directly into improved process economy and reduced downtime for the machining cell. The association with Walter Tools indicates a design focus on consistent performance in industrial environments. Stable geometry and precise chip control for safer cutting The combination of a triangular 60° shape, 0.4 mm nose radius, and the MP4 chipbreaker provides a predictable cutting behaviour for facing and light to medium turning operations. The 11° clearance supports secure contact at cutting angles while limiting rubbing, and the insert’s geometry promotes short, segmented chips that evacuate readily in typical turning set-ups. For operators and programmers, this means steadier forces, improved surface quality and a reduced risk of built-up edge, which helps maintain part tolerances with fewer interventions. Application guidance and process advantages for steel operations Designed for the machining group P, the grade is optimised for a broad spectrum of unalloyed and alloyed steel grades, providing balanced performance where thermal load and chip formation demand robust solutions. The T3 thickness and tolerance class G ensure repeatable seating in standard toolholders while the MP4 chip control reduces the need for frequent cutting-parameter adjustments. For companies seeking predictable cycle times and consistent component finish, this insert supports higher throughput with lower process variation. Metav Werkzeuge can supply application data and match the insert to suitable holders and cutting parameters for specific steel grades. For high-productivity steel turning with the Tiger·tec Gold WPP20G grade, contact Metav Werkzeuge for technical advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TPGT16T304-MP4-WPP20G-WALTER Label: Drehwendeschneidplatte TPGT16T304-MP4 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Turning indexable insert Grade: WPP20G Series: Tiger·tec Gold Facts Clearance angle: 11° Corner radius: 0.4 mm Insert size: 16 Thickness: T3 Plate form: Triangle 60° Tolerance class: G Special features MP4 chipbreaker Coated cemented carbide (Tiger·tec Gold) Optimised for steel machining (P) Bezeichnung ohne Sorte: TPGT16T304-MP4 Suitable for facing and general turning operations FAQ What materials is this insert intended for? The TPGT16T304-MP4 WPP20G insert is optimised for machining steels (material group P) and is designed to handle the thermal and chip-formation characteristics typical of unalloyed and alloyed steels. Which chipbreaker is fitted and what benefit does it provide? The insert features the MP4 chipbreaker; this ensures controlled chip shaping and evacuation, leading to steadier cutting forces and improved surface finish in turning operations. What does the WPP20G grade mean for production? WPP20G is a Tiger·tec Gold coated grade that balances wear resistance and toughness, extending tool life and offering consistent performance across a range of steel components. How does the insert geometry affect finishing and roughing? The triangular 60° form with a 0.4 mm nose radius supports accurate profile control and good surface quality; it is suitable for light to medium turning where a balance of strength and precision is required. Is this insert compatible with standard toolholders? Yes; the T3 thickness and tolerance class G match standard indexable insert seatings for turning toolholders, enabling straightforward integration into existing tool assemblies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are cited for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TPGT16T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver reliability, the WSM01 coated‑carbide grade and the secure MM4 chipbreaker for stable turning of stainless steels and superalloys; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. TPGT16T308-MM4 WSM01 – Triangular turning insert, 11° relief, Walter Tools The TPGT16T308-MM4 WSM01 is a triangular 60° turning insert from Walter Tools, engineered for productive machining of stainless steels and heat‑resistant superalloys in demanding turning operations. Tiger‑tec Silver coated carbide insert For stainless steels and superalloys Triangular 60° form with 0.8 mm corner radius 11° relief angle for secure chip control Reliable chip control for difficult materials The combination of the MM4 chipbreaker and the Tiger‑tec Silver series creates a robust system for predictable chip formation when machining demanding alloys. The chipbreaker geometry channels chips away from the cutting zone, reducing built‑up edge and thermal loads; this leads to a steadier cut and fewer interruptions in production. For workshops processing stainless steels or titanium alloys, the result is improved process stability and a lower scrap rate compared with generic, non‑optimised grades. Consistent edge life and process security The WSM01 grade is a coated carbide developed to resist thermal and mechanical stresses typical of heat‑resistant workpieces. Its coating supports a stable cutting edge and extended tool life under elevated temperatures, which in turn reduces tool changes and machine downtime. In practical terms, this means longer runs between interventions and more consistent dimensional results during serial production. Geometry that supports effective turning and component quality A triangular 60° insert form with a 0.8 mm corner radius offers a balance between rigidity and profile definition for general turning tasks. The 11° relief angle reduces rubbing on the flank and helps maintain surface finish without sacrificing edge strength. As a result, the geometry enables both reliable finishing passes and robust light‑roughing operations on tougher materials, simplifying tooling families on the shop floor. Application guidance and workshop integration The insert is intended for use in turning applications that require resistance to heat and stable chip control—primarily stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). Selection of feed and speed will depend on machine rigidity and part clamping; for tailored application parameters or compatibility with specific toolholders, technical advice is available. For further assistance call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss machining trials and optimisation. Contact Metav Werkzeuge for selection support and availability of Walter Tools Tiger‑tec Silver inserts, or request tailored application recommendations directly from the specialists Technical data Article number: TPGT16T308-MM4-WSM01-WALTER Designation: TPGT16T308-MM4 ISO designation: TPGT16T308-MM4 WSM01 Manufacturer: Walter Tools Product type: Turning insert Facts Relief angle: 11° Corner radius: 0.8 mm Insert size: 16 mm Thickness: T3 Form: Triangle 60° Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Suitable materials: S / M (heat‑resistant superalloys/titanium, stainless steels) Execution: T FAQ Which materials are suitable for this insert? The TPGT16T308‑MM4 WSM01 insert from Walter Tools is suitable for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering secure chip control and edge stability for these materials. What is the insert geometry and how does it affect machining? The triangular 60° shape with a 0.8 mm corner radius and an 11° relief angle provides a robust cutting edge for general turning, allowing a compromise between surface quality and edge strength for finishing and light roughing. What does the WSM01 grade offer? WSM01 is a coated‑carbide grade in the Tiger‑tec Silver series designed for thermal and mechanical resistance; it supports longer tool life and consistent cutting performance when machining demanding alloys. Which chipbreaker is fitted and why is it important? The MM4 chipbreaker is integrated to promote controlled chip formation and evacuation, reducing built‑up edge and improving process reliability during continuous turning operations. Can this insert be used with standard turning toolholders? The insert conforms to the standard triangular insert form and ISO designation; compatibility with a specific clamping system should be checked, but the geometry and thickness (T3) match common toolholder families. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TPGT16T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, the WSM20S grade for stainless steels and superalloys, and the stable r0.8 corner radius to ensure consistent machining quality and extended tool life; order or request advice via Metav Werkzeuge for a seamless production setup. TPGT16T308-MM4 WSM20S turning indexable insert — Walter Tools, Tiger·tec Silver, MM4 chipbreaker The TPGT16T308-MM4 WSM20S is an indexable turning insert designed for reliable cutting of stainless steels and heat‑resistant superalloys, combining a hard‑wear coating with a geometry optimised for stable chip control. Tiger·tec Silver coating for excellent wear resistance Suitable for stainless steel and superalloys machining Triangular 60° geometry for versatile turning 11° relief and r0.8 for stable cutting edge Greater process reliability for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade provides a pronounced focus on wear resistance and edge stability, addressing the typical challenges when machining stainless steels and heat‑resistant superalloys. These materials are prone to work hardening and generate high cutting temperatures; the coated carbide formulation reduces flank wear and prolongs tool life, which translates into fewer tool changes and higher overall machine uptime. In practice, this means a more consistent production rhythm and reduced unscheduled downtime, supporting measurable efficiency improvements on the shop floor. Improved surface quality through precision geometry A triangular 60° form with an 11° relief angle and r0.8 corner radius delivers a balanced mix of strength and finish capability. The geometry minimises radial cutting forces while the moderate corner radius helps maintain a sharp, yet robust edge for longer, producing repeatable surface finishes on tubular and prismatic parts. The MM4 chipbreaker is tailored to break and evacuate chips reliably in interrupted cuts and varying depths of cut, which helps maintain process stability and reduces the risk of surface defects — a clear benefit where component finish is critical. Seamless integration and handling advantages Sized to the TPGT16 family and supplied in a T3 thickness, this indexable insert fits conventional toolholders that accept this designation, enabling quick replacement and simple inventory management. The coated carbide substrate offers a good compromise between toughness and hardness for mixed production runs, while the WSM20S sort is intentionally tuned for demanding alloys where secure chip formation and a stable cutting edge are priorities. As a result, the insert supports predictable cycle times and easier process qualification in series production setups. For application advice or to secure availability of Walter Tools inserts with Tiger·tec Silver technology, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast delivery. Technical data SKU: TPGT16T308-MM4-WSM20S-WALTER Designation: TPGT16T308-MM4 WSM20S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Tolerance class: G Facts Relief angle: 11° Corner radius: 0.8 mm Inscribed circle / size: 16 mm Plate thickness: T3 Plate form: triangular 60° Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: MM4 Material applicability: stainless steels (ISO group M) Material applicability: heat‑resistant superalloys and titanium (ISO group S) Geometry: TPGT16 family compatible FAQ Is the insert suitable for machining stainless steel? The TPGT16T308-MM4 WSM20S insert from Walter Tools is specifically geared to ISO group M materials and is suitable for machining stainless steels thanks to the Tiger·tec Silver coating and the WSM20S grade. What does WSM20S indicate for cutting performance? WSM20S denotes a Walter Tools coated‑carbide grade optimised for secure chip formation and edge stability when working with tough, heat‑sensitive alloys; the designation is part of the Tiger·tec Silver family. Which chip types does the MM4 chipbreaker support? The MM4 chipbreaker on this turning insert helps form short, controllable chips in mixed turning operations, supporting stable evacuation and consistent surface quality with the TPGT16T308-MM4 geometry. How does the r0.8 corner radius affect durability and finish? A corner radius of r0.8 balances a robust cutting edge with the ability to produce a fine surface finish, extending edge life while reducing the risk of chipping during interrupted cuts for the TPGT16T308-MM4 WSM20S insert. Can this insert be used in standard TPGT16 toolholders? Yes, the designation indicates compatibility with toolholders designed for the TPGT16 size family, allowing straightforward replacement and consistent clamping in established turning systems. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation and reference. There is no affiliation between our company and the mentioned brands. The item offered is original, factory‑new manufacturer product.
TPGT16T308-MP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control, and a compact 60° triangle geometry for consistent steel machining. Order the TPGT16T308-MP4 WPP20G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT16T308-MP4 WPP20G indexable turning insert – Triangle 60°, 0.8 mm nose radius, Walter Tools TPGT16T308-MP4 WPP20G is a coated carbide indexable turning insert engineered for efficient steel machining in general turning applications Tiger·tec Gold coated carbide Grade WPP20G for steel machining Triangle 60° shape for versatile turning 0.8 mm nose radius with MP4 chipbreaker Productivity and predictable tool life for steel turning The combination of Tiger·tec Gold coating and the WPP20G grade delivers a robust, wear-resistant cutting edge tailored to steel (ISO P). The coated carbide design reduces flank wear and thermal degradation, which translates into longer tool life and fewer interruptions for insert changes. For production environments where consistent component quality and uptime are priorities, this insert offers a balanced trade-off between durability and cutting performance. The coating technology also supports higher cutting parameters compared with uncoated grades, improving throughput without compromising dimensional stability. Geometry that balances strength and surface finish The Triangle 60° form with a 0.8 mm nose radius and an 11° clearance angle provides a sturdy cutting edge suited to a wide range of turning tasks. The relatively small nose radius helps achieve controlled chip formation and good surface finish on typical steel grades, while the 60° geometry offers multiple indexing positions for economical use. The 11° clearance reduces rubbing on the flank, lowering cutting forces and heat generation; this benefits tool life and contributes to stable machining results, especially in interrupted or roughing conditions. Controlled chip formation for secure production Equipped with the MP4 chipbreaker, this insert promotes predictable chip segmentation and evacuation in steel. Efficient chip control minimises the risk of entanglement and surface damage, supporting safer unattended runs and faster cycle times. The chipbreaker geometry is designed to assist in producing short, manageable chips across a variety of feeds and depths of cut, which helps maintain cutting zone stability and reduces secondary operations associated with poor chip behaviour. Practical integration and handling in the workshop The insert is supplied in the designation TPGT16T308-MP4 WPP20G, with a compact 16 mm size and T3 thickness, allowing straightforward fitting into common turning toolholders designed for triangular inserts. The tolerance class G and execution code T ensure consistent seating and repeatable positioning, which are essential for precision batch production. For teams evaluating tooling choices, this insert provides a pragmatic balance: robust enough for demanding cycles yet accessible for routine tool management and inventory control. For further application parameters or to confirm suitability for specific steel grades, technical advice is available. Request a tailored cutting solution from Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for a quotation or application advice on the Walter Tools TPGT16T308-MP4 WPP20G indexable turning insert Technical data Article number: TPGT16T308-MP4-WPP20G-WALTER Designation: TPGT16T308-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Product type: indexable turning insert Facts Insert size: 16 mm Thickness: T3 Nose radius: 0.8 mm Clearance angle: 11° Shape: Triangle 60° Tolerance class: G Special features Chipbreaker: MP4 Coating / material: coated carbide (Tiger·tec Gold) Material application: Steel (ISO P) Execution: T FAQ Which materials is this insert intended for? The TPGT16T308-MP4 WPP20G indexable turning insert from Walter Tools is specified for steel machining (ISO P) and is optimised for common unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, extending the cutting edge life of the Walter Tools insert and allowing more consistent machining parameters. How does the MP4 chipbreaker influence performance? The MP4 chipbreaker promotes controlled chip formation and evacuation in steel, reducing the risk of chip-related interruptions and supporting better surface quality with the TPGT16T308-MP4 WPP20G insert. What cutting geometry should be expected from this insert? The insert features a Triangle 60° geometry with a 0.8 mm nose radius and an 11° clearance angle, offering a strong edge for versatile turning tasks while maintaining good surface finish. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here solely for explanation. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TPGW110204FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of PCD cutting material (WDN10) and a precise 0.4 mm corner radius for reliable, long-lasting performance in abrasive, non‑ferrous turning operations; order directly via Metav Werkzeuge or consult our technical advisors for process alignment. TPGW110204FS-1 WDN10 turning insert, PCD, triangle 60° — Walter Tools A TPGW110204FS-1 WDN10 indexable turning insert designed for machining abrasive non‑ferrous materials where high wear resistance and stable edge life are required. PKD cutting material (WDN10) for abrasive non‑ferrous Triangle 60° insert for secure clamping 0.4 mm corner radius for precise edge definition 11° clearance angle, stable cutting geometry High wear resistance for abrasive non‑ferrous machining The insert uses PCD (polycrystalline diamond) in the WDN10 grade to deliver exceptional wear resistance when cutting abrasive, non‑ferrous alloys and composite materials. The material choice reduces the frequency of tool changes and maintains consistent dimensional accuracy over longer runs, which supports higher overall equipment effectiveness. The robust cutting edge reduces process interruptions, contributing to a measurable improvement in productivity for batch and series turning tasks. Geometry engineered for repeatable surface quality With a triangle 60° form and a 0.4 mm corner radius, the insert provides a balance between edge strength and the ability to produce a controlled surface finish. The 11° clearance angle supports a positive cutting geometry, lowering cutting forces and improving chip evacuation in many non‑ferrous applications. This geometry supports repeatable results on CNC lathes and turning centres, translating into fewer rework operations and a better first‑pass yield. Application guidance and compatibility notes This cutting grade is optimised for abrasive, non‑ferrous materials; users are advised to verify suitability against the specific product matrix provided by the manufacturer before series production. The insert’s chipbreaker and edge form are intended to enhance chip control in interrupted cuts and thin wall turning, where predictable chip formation is critical. Selection of appropriate feed and speed values should follow the manufacturer’s recommendations and machine/toolholder capability to maximise tool life. Productivity and process reliability in daily operation Choosing this insert supports a strategy of longer tool life and fewer tool changes, which reduces downtime and handling costs. The proven engineering behind the grade and form supports consistent machining results on components requiring tight tolerances, while the open series design allows easy integration into existing turning tool systems. The reputation of Walter Tools for precise cutting solutions underpins the product’s suitability for demanding industrial applications. Contact Metav Werkzeuge today for tailored technical advice and to secure the Walter Tools TPGW110204FS-1 WDN10 insert for high‑performance turning — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: TPGW110204FS-1-WDN10-WALTER Article designation: TPGW110204FS-1 WDN10 Product type: Turning insert Manufacturer: Walter Tools Core specifications Clearance angle: 11° Corner radius: 0.4 mm Insert shape: Triangle 60° Size: 11 Thickness code: 02 Tolerance class: G Materials & features Cutting material: PCD (polycrystalline diamond) — WDN10 Chipbreaker type: 1 Series: Walter cutting grade – open series Material designation: catalogue‑dependent Application note: verify workpiece suitability in the product matrix FAQ What materials is this insert best suited for? The insert is intended for abrasive, non‑ferrous materials; the TPGW110204FS-1 WDN10 uses PCD and is optimised for such applications, but final suitability should be checked against the product matrix. Is the 0.4 mm corner radius suitable for finishing passes? A 0.4 mm radius provides a good compromise between edge strength and finish quality; for ultra‑fine finishes, consult the cutting data to select the most appropriate radius and feeds. How does the triangle 60° shape affect tool holding? The triangle 60° form offers stable clamping positions and multiple indexable corners, improving tool life economy and helping to maintain consistent cutting geometry throughout production. Can this insert be used on interrupted cuts? The PCD grade and chipbreaker design support use in interrupted cuts on abrasive non‑ferrous components, but cutting parameters should be adapted and tested for each specific application. Where can cutting data and the product matrix be obtained? Cutting data and the product matrix are available from the manufacturer; refer to Walter Tools documentation or contact Metav Werkzeuge for consolidated technical guidance. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer. Walter Tools (Walter AG) is a recognised provider of precision metalcutting tools and forms part of the broader group of established tooling manufacturers.
TPGW16T304FS-1 WDN10 Wendeplatten - Walter Tools
Benefit from exceptional wear resistance and a precise cutting geometry designed for abrasive non‑ferrous materials; the combination of PKD grade and a stable triangular form supports reliable productivity and predictable tool life. Order the insert directly via Metav Werkzeuge or request advice from our consultants. TPGW16T304FS-1 WDN10 indexable turning insert — PKD grade for abrasive non‑ferrous machining | Walter Tools TPGW16T304FS-1 WDN10 is an indexable turning insert engineered for machining abrasive, non‑iron materials where wear resistance and dimensional stability are critical PKD grade WDN10 for abrasive non‑ferrous materials Triangular 60° form, 0.4 mm corner radius 11° relief angle for stable cutting geometry Thickness T3 with chipbreaker type 1 for reliable chips Exceptional wear resistance for abrasive non‑ferrous applications The insert is built on a PKD (polycrystalline diamond) grade WDN10, which offers outstanding abrasion resistance and long tool life when machining non‑iron materials. In practice, that means fewer indexings and longer uninterrupted runs when working with abrasive aluminium alloys or other non‑ferrous, particle‑containing materials. The PKD grade is especially suitable where surface integrity and dimensional accuracy are required; its hardness minimises flank wear and preserves the cutting edge under demanding conditions. Stable geometry delivers reproducible process performance A triangular 60° form combined with an 11° relief angle ensures a robust cutting edge and controlled engagement with the workpiece. The defined 0.4 mm corner radius balances edge strength with an acceptable surface finish, reducing the risk of edge chipping during interrupted cuts. These geometric parameters translate to improved repeatability in production runs and easier process parameter transfer between machines, supporting predictable cycle times and reduced scrap rates. Controlled chip formation and secure seating for productivity Chip control is managed by chipbreaker type 1 and a T3 thickness, optimised for the specified material class to produce short, controllable chips and avoid entanglement. The insert geometry supports secure clamping and stable cutting forces, which helps maintain surface quality and reduces the need for secondary operations. Fewer interruptions for chip clearing and less tool handling contribute to lower overall operating costs and smoother workflow on the shop floor. Selection guidance and economic rationale for production This grade and geometry are intended for manufacturers who prioritise longevity and process stability when machining abrasive non‑ferrous components. The TPGW16T304FS-1 WDN10 insert can lower per‑part tooling costs through extended life and fewer replacements. Material suitability should be verified against the manufacturer’s product matrix to ensure optimal results; process trials are recommended for borderline materials. For application support or questions about integration into existing toolholders, Metav Werkzeuge provides technical consultation and process advice. Contact Metav Werkzeuge today for grade selection and process support — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best solution for the task. Technical data SKU: TPGW16T304FS-1-WDN10-WALTER Article designation: TPGW16T304FS-1 WDN10 Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Relief angle: 11° Corner radius: 0.4 mm Insert form: triangular 60° Size: 16 Thickness: T3 Chipbreaker: 1 Tolerance class: G Materials and features Grade: WDN10 (PKD) Series: Walter Schneidstoffsorte - Serie offen Application note: For abrasive non‑ferrous materials Finish/execution: W Insert designation without grade: TPGW16T304FS-1 FAQ What materials is this insert intended for? The TPGW16T304FS-1 WDN10 insert is designed primarily for abrasive, non‑ferrous materials; the PKD WDN10 grade performs especially well on aluminium alloys and other abrasive non‑iron substrates. How does the corner radius affect the machining result? A 0.4 mm corner radius provides a compromise between edge strength and surface finish; the radius helps resist chipping while maintaining acceptable surface quality during turning operations with the TPGW16T304FS-1. Can the insert be used for interrupted cuts? The triangular form and robust PKD grade of this insert support interrupted cutting; however, process parameters should be adapted and tested for specific workpiece conditions to confirm performance. What benefits does PKD WDN10 offer over conventional carbide inserts? PKD WDN10 delivers significantly higher abrasion resistance on non‑ferrous, abrasive materials, resulting in longer tool life and fewer indexings compared with carbide in the same applications. How should the chipbreaker and thickness be interpreted for feed and speed selection? Chipbreaker type 1 and thickness T3 are optimised for controlled chip formation in the intended material class; start with conservative speeds and feeds recommended for PKD inserts and adjust according to surface finish and tool life observations. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand‑new goods of the manufacturer.
TPGW16T308FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the high wear resistance of PKD, the precise 60° triangular geometry, and the stable chip control for efficient turning of abrasive non‑ferrous materials; order the insert via Metav Werkzeuge or contact our consultants for application advice. TPGW16T308FS-1 WDN10 — indexable turning insert (PKD), triangular 60° — Walter Tools TPGW16T308FS-1 WDN10 is an indexable turning insert designed for production machining of abrasive, non‑ferrous materials, combining a PKD grade with a compact, precise form. PKD grade WDN10 for abrasive non‑ferrous materials Triangular 60° shape for versatile cutting positions Corner radius 0.8 mm for consistent edge strength 11° free angle and T3 thickness for stable cutting Exceptional wear resistance for abrasive non‑ferrous workpieces The insert is manufactured in a polycrystalline diamond (PKD) grade WDN10, which delivers markedly higher wear resistance than conventional carbide for abrasive, non‑ferrous materials. PKD consists of a diamond layer sintered onto a substrate that resists abrasive wear and preserves cutting geometry over long runs; this results in fewer tool changes and improved process uptime. The material choice makes the insert especially suitable for machining applications where tool life and surface integrity are critical, such as high‑volume aluminium‑silicon alloys, graphite‑reinforced composites and other non‑ferrous abrasive components. Stable cutting geometry and improved surface quality The 60° triangular form and a corner radius of 0.8 mm provide a robust edge that balances cutting strength and finish. Combined with the 11° free angle and the specified chipbreaker 1, the geometry promotes controlled chip formation and evacuation, reducing the risk of chip recutting and vibration. As a result, operators can expect consistent workpiece surfaces and predictable tool performance. The insert’s tolerance class G ensures repeatable seating in most standard toolholders, supporting dimensional accuracy and minimising set‑up variation. Integration, handling and application guidance for production use Marked as TPGW16T308FS-1, the insert features a T3 thickness suited to many standard turning toolholders and clamping systems; compatibility should be verified against the specific toolholder catalogue. The WDN10 grade belongs to the Walter open series and is intended for production scenarios where abrasive non‑ferrous materials demand long‑lasting cutting performance. For optimal results, verify the product matrix for workpiece‑and‑cutting‑condition suitability and consider toolpath and coolant strategies adapted to PKD behaviour. If clarification is required on holder match or machining parameters, Metav Werkzeuge’s technical team can advise by email or phone. For application recommendations or availability enquiries contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Walter Tools PKD inserts and compatible toolholder options. Technical data Article number: TPGW16T308FS-1-WDN10-WALTER Designation: TPGW16T308FS-1 WDN10 Type: indexable turning insert Facts Insert size: 16 mm Plate form: 60° triangle Corner radius: 0.8 mm Free angle: 11° Thickness: T3 Chipbreaker: 1 Tolerance class: G Special features Grade: WDN10 (PKD / polycrystalline diamond) Series: Walter Schneidstoffsorte - Serie offen Intended application: abrasive, non‑ferrous materials (verify matrix for specific workpiece) Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TPGW16T308FS-1 WDN10 insert uses a PKD grade designed primarily for abrasive, non‑ferrous materials; check the product matrix for confirmation against specific alloys and composites. Is the insert suitable for finishing or roughing operations? With a 0.8 mm corner radius and PKD cutting edge, the insert suits both stable finishing and medium roughing where abrasive wear is the limiting factor; feed and depth should be adjusted to the component and machine capability. How does the PKD grade affect tool life compared to carbide? PKD in the WDN10 grade offers significantly higher wear resistance on abrasive non‑ferrous materials than carbide, which typically extends tool life and reduces changeover frequency for the same cutting conditions. Can the TPGW16T308FS-1 be used in common toolholders? The TPGW16T308FS-1 format and tolerance class G are compatible with many standard turning toolholders; verify holder compatibility and clamping details before assembly. Where to check suitability for a specific component material? Refer to the product matrix and machining data from Walter Tools for grade‑to‑material recommendations; Metav Werkzeuge can provide application guidance if required. Protected trademarks and product names are the property of their respective owners. Mentions of brand names such as Walter Tools are for explanation only; there is no commercial connection implied. The offered item is an original, factory‑new article of the manufacturer. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TPJW1604PPN WAK15 Wendeplatten - Walter Tools
TPJW1604PPN WAK15 Fräswendeschneidplatte für Aluminium | Walter Tools Die TPJW1604PPN WAK15 ist eine dreieckige Fräswendeschneidplatte aus unbeschichtetem Hartmetall, entwickelt für effiziente Aluminium- und NE-Metallbearbeitung im Walter N-Sortensystem Hohe Schneidpräzision bei Aluminiumbearbeitung Unbeschichtetes Hartmetall für scharfe Schneidkanten Dreieck 60° für stabile Werkzeugaufnahmen Freiwinkel 11° für reduzierten Spanaufbau Kompatibel mit Walter N-Sortensystem Produktleistung für produktive Aluminiumbearbeitung Die Wendeschneidplatte bietet durch die WAK15 Schneidstoffsorte eine Kombination aus scharfer Schneide und guter Spanabfuhr, was die Produktivität bei der Bearbeitung von Aluminium steigert. Die Geometrie der Dreiecksplatte sorgt für stabile Aufnahmen und gleichbleibende Bearbeitungsbedingungen. Daraus resultiert eine höhere Prozesssicherheit und weniger Stillstandzeiten in der Fertigung, was sich direkt auf die Wirtschaftlichkeit auswirkt. Materialprofil und technischer Nutzen Der unbeschichtete Hartmetall-Schneidstoff ist speziell für Nichteisenmetalle ausgelegt und minimiert Materialanhaftungen bei weichen Werkstoffen wie Aluminium und Messing. Die scharfe Kante und der Freiwinkel von 11° reduzieren Schnittkräfte und verbessern die Oberflächengüte. Anwender profitieren von geringerer Nacharbeit und längeren Wechselintervallen, besonders bei Serienbearbeitung und hohen Schnittgeschwindigkeiten. Einsatzempfehlung und Zielgruppe Entwickelt für Anwender in der Zerspanung, Maschinenbau und Komponentenfertigung, eignet sich die Platte insbesondere für Fertigungen mit hohem Aluminiumanteil. Das Produkt ist prädestiniert für produktionsorientierte Werkstätten, die auf konstante Qualität und schnelle Rüstzeiten setzen. Aufgrund der universellen Dreieckform sind Flexibilität und einfache Lagerhaltung zusätzliche Vorteile für Produktionsleiter und Beschaffer. Empfehlung: Für effiziente Aluminiumbearbeitung die WAK15-Sorte von Walter Tools einsetzen und bei technischen Fragen den Kundendienst von Metav Werkzeuge kontaktieren – E‑Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale SKU: TPJW1604PPN-WAK15-WALTER Marke: Walter Tools Serie: Walter N-Sortensystem Bezeichnung: TPJW1604PPN WAK15 Fakten Plattengröße: 16 Plattendicke: 04 Plattenform: Dreieck 60° Freiwinkel: 11° Besonderheiten WAK15: unbeschichtetes Hartmetall, geeignet für Aluminium und NE‑Metalle Materialkennzeichnung: N (Nichteisenmetalle) Ausführung: W Toleranzklasse: J FAQ Welche Werkstoffe sind mit dieser Wendeschneidplatte bearbeitbar? Die TPJW1604PPN WAK15 von Walter Tools ist vor allem für Aluminium und andere Nichteisenmetalle ausgelegt und liefert dort beste Ergebnisse dank scharfer Schneidkante und reibungsarmer Geometrie. Ist die Platte beschichtet und was bedeutet das für den Einsatz? Die WAK15‑Sorte ist unbeschichtetes Hartmetall; das sorgt für sehr scharfe Kanten und reduziert Anhaften bei Aluminium, eignet sich somit besonders für hohe Schnittgeschwindigkeiten. Für welche Werkzeugaufnahme eignet sich die Dreiecksform? Die Dreieck 60° Form bietet stabile Aufnahmen und einfache Positionierbarkeit, wodurch die TPJW1604PPN WAK15 zuverlässige Wiederholgenauigkeit in der Produktion gewährleistet. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TPJW1604PPN WKM WKM Wendeplatten - Walter Tools
Benefit from reliable productivity and consistent edge life thanks to Walter's WKM coated carbide and the triangle 60° geometry with an 11° relief; the result is stable milling and predictable tool behaviour. Order the TPJW1604PPN WKM directly via Metav Werkzeuge or request application advice from our specialists. TPJW1604PPN WKM — Milling insert, triangle 60°, 11° relief (Walter Tools) A TPJW1604PPN WKM milling insert engineered for indexable milling operations where consistent chip control and repeatable performance are required Triangle 60° insert 11° relief angle Coated cemented carbide WKM Tolerance class J Stable cutting performance for productive milling The triangular insert form delivers three usable cutting edges per index, which increases part uptime and reduces tooling costs per edge. The WKM grade denotes a coated cemented carbide that is optimised for a broad range of milling tasks; this provides a balance between wear resistance and toughness, supporting longer intervals between regrinds. With the 11° relief, the cutting geometry reduces rubbing on the flank and helps maintain a clean shear, which is particularly beneficial during interrupted cuts and when machining mixed batches. These technical characteristics translate into measurable process stabilisation on the shop floor and easier cycle-time planning. Application clarity and materials guidance The insert's triangle 60° geometry makes it suitable for both face and light shoulder milling where a positive cutting action is preferred. The specification and series description advise checking the product matrix for exact workpiece compatibility; the WKM coating class is intended for versatile use across many common engineering materials. Users with limited metallurgical background should note that a coated carbide insert offers improved wear protection compared with uncoated grades, while still preserving edge toughness for occasional higher loads. This combination supports efficient material removal without sacrificing surface integrity. Practical benefits that support process economics Using the TPJW1604PPN WKM reduces tool-change frequency through multiple indexed edges and a robust coating system, supporting lower cost per component in high-mix and repetitive production. The tolerance class J ensures consistent interchangeability in toolholders and predictable runout behaviour, which simplifies set-up and reduces scrap risk. For manufacturers seeking to increase throughput without compromising repeatability, the insert’s design and grade offer an effective compromise of productivity and tool life, helping operations reach productivity targets more reliably. Contact Metav Werkzeuge for tailored application recommendations and availability of the TPJW1604PPN WKM from Walter Tools via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TPJW1604PPN-WKM-WALTER Designation: TPJW1604PPN WKM Product type: Milling insert Manufacturer: Walter Tools Facts Relief angle: 11° Insert form: Triangle 60° Size code: 16 Thickness code: 04 Tolerance class: J Special features Coating / grade: WKM (coated cemented carbide) Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig Execution code: W UID: TPJW1604PPN-WKM-WALTER FAQ What materials is this insert suited for? The TPJW1604PPN WKM is supplied in a coated cemented carbide grade WKM, intended for versatile milling tasks; users should consult the product matrix to confirm suitability for specific materials. How many cutting edges are available per insert? The triangular form provides three indexed cutting edges, allowing for economical edge changes and extended service life before disposal or regrinding. What does the 11° relief angle affect in practice? An 11° relief reduces flank contact and heat build-up, improving chip evacuation and extending edge life during general milling operations. Is the insert compatible with standard toolholders? The insert follows common triangular 60° indexable geometry and is produced to tolerance class J, which supports interchangeability with compatible clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPJW1604PPN WKP25S Wendeplatten - Walter Tools
TPJW1604PPN WKP25S Fräswendeschneidplatte von Walter Tools TPJW1604PPN WKP25S ist eine robuste Fräswendeschneidplatte für produktive Zerspanung von Stahl und Gusseisen, ausgelegt für universelle Fräsaufgaben in der Serienfertigung Tiger·tec Silver Beschichtung für lange Standzeiten Geeignet für Stahl- und Gusseisenbearbeitung Dreieck 60° für stabile Werkzeugaufnahme Freiwinkel 11° für universelle Einsatzbedingungen Toleranzklasse J für präzise Passform Beschichtungsqualität für konstante Prozesssicherheit Die Tiger·tec Silver Beschichtung kombiniert verschleißfestes Hartmetall mit optimierter Oberflächentechnik, wodurch die Standzeit und Wiederholgenauigkeit deutlich steigen. Durch die Beschichtungsstruktur reduziert sich der thermische Verschleiß bei der Bearbeitung von Stahl und Gusseisen, was zu verlässlichen Zerspanungsbedingungen und weniger Stillstandszeiten führt. Anwender profitieren von stabiler Spanbildung und planbaren Werkzeugwechselintervallen Geometrie und Mechanik sorgen für Stabilität und Kontrolle Die Dreieckige Plattenform Dreieck 60° bietet eine robuste Auflagefläche und exakte Positionierung im Halter, wodurch Vibrationen minimiert und die Oberflächengüte verbessert werden. Ein Freiwinkel von 11° unterstützt universelle Schnittbedingungen und erleichtert die Spanabfuhr bei wechselnden Schnittparametern. Diese Kombination macht die Platte besonders geeignet für anspruchsvolle Fräsoperationen mit konstanten Ergebnissen Anwendungsspektrum und Wirtschaftlichkeit Die Sorte WKP25S ist speziell für die Bearbeitung von Stahl (ISO P) und Gusseisen (ISO K) entwickelt worden und zeigt ihre Stärken bei abrasiven und wärmeintensiven Aufgaben. Die Auswahl dieser Wendeschneidplatte reduziert Ausschuss und Nacharbeit und verbessert das Zeit-Wirtschafts-Verhältnis in der Serienfertigung. Produktionsverantwortliche schätzen die einfache Sortenzuordnung und die planbare Werkzeugstandzeit Empfehlung: Die TPJW1604PPN WKP25S von Walter Tools empfiehlt sich als wirtschaftliche Wahl für produktive Fräsprozesse; bei Fragen technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: TPJW1604PPN-WKP25S-WALTER Marke: Walter Tools Serie: Tiger-tec Silver Sorte: WKP25S Produkttyp: Fräswendeschneidplatte Plattenform: Dreieck 60° Plattengröße: 16 Plattendicke: 04 Freiwinkel: 11° Ausführung: W Toleranzklasse: J Material: P / K Bezeichnung: TPJW1604PPN ISO-Bezeichnung: TPJW1604PPN WKP25S Fakten Plattengröße: 16 Freiwinkel: 11° Plattendicke: 04 Besonderheiten Baureihe: Tiger·tec Silver Schneidstoffklasse: beschichtetes Hartmetall WKP25S: Walter-Schneidstoffsorte P: Stahl (für unlegierte und legierte Stähle) K: Gusseisen (für abrasive Werkstoffe) Toleranzklasse: J FAQ Ist die Platte für rostfreien Stahl geeignet? Die TPJW1604PPN WKP25S von Walter Tools ist primär für Stahl und Gusseisen ausgelegt. Ein Einsatz an rostfreiem Stahl ist nicht als Standardanwendung angegeben Welche Vorteile bringt die Tiger·tec Silver Beschichtung? Die Tiger·tec Silver Beschichtung erhöht die Standzeit und verbessert die Verschleißfestigkeit, wodurch die TPJW1604PPN WKP25S konstante Bearbeitungsergebnisse und weniger Werkzeugwechsel ermöglicht Welche Plattengröße ist erhältlich und wie wirkt sich das aus? Die Plattengröße 16 bietet eine gute Kombination aus Schneidenlänge und Stabilität, ideal für mittlere bis schwere Fräsoperationen mit hoher Prozesssicherheit Für welche Werkstoffgruppen ist die Wendeschneidplatte freigegeben? Die Wendeschneidplatte ist freigegeben für ISO P (Stahl) und ISO K (Gusseisen), was die Einsatzbereiche in der Serienbearbeitung klar definiert Wie unterstützt die Geometrie die Spanabfuhr? Die Dreieckige Form und der Freiwinkel von 11° begünstigen eine kontrollierte Spanabfuhr und reduzieren die Bildung von lang spanigen Ablagerungen, was die Prozessstabilität erhöht Hersteller: Walter Tools; Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPJW1604PPN WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coated carbide and the WKP35S grade for reliable, productive milling of Stahl and cast iron; the triangular 60° geometry with an 11° clearance delivers consistent chip control and long tool life. Order the insert via Metav Werkzeuge or consult their experts for selection support. TPJW1604PPN WKP35S – Milling insert, triangle 60° with 11° clearance (Walter Tools) The TPJW1604PPN WKP35S is a triangular indexable milling insert engineered for productive machining of Stahl and cast iron in industrial milling applications. Tiger·tec Silver coating for long tool life Suitable for Stahl (P) and cast iron (K) Triangle 60° form with 11° clearance Grade WKP35S, coated carbide for stability Higher output through coating and grade optimisation The combination of the Tiger·tec Silver technology and the WKP35S grade offers a measurable improvement in wear resistance and process security during continuous milling operations. The insert’s coated carbide construction is designed to withstand the thermal and abrasive loads typical when working with Stahl and cast iron, which supports longer tool life and fewer changeovers. This translates directly into increased machine uptime and predictable production cycles. Geometry that improves chip flow and edge stability The triangle 60° geometry combined with an 11° clearance angle creates a robust cutting face that promotes stable cutting-edge behaviour under varying depths of cut. This positive combination reduces the tendency for built-up edge and helps maintain a consistent cutting condition, improving surface finish and dimensional stability on the workpiece. The insert’s execution and tolerance class ensure repeatable seating in appropriately designed tool holders, contributing to overall manufacturing productivity. Application-focused advantages and selection guidance Designed primarily for milling applications in general engineering and production workshops, the insert is suitable where reliable performance in Stahl and cast iron is required. The WKP35S sort is a coated, wear-resistant carbide grade intended to balance durability with economical cutting parameters; it is particularly effective where steady chip formation and reliable edge life are priorities. For best results, pair the insert with cutters and clamping systems rated for triangular 60° inserts and follow the machine and toolholder manufacturer’s recommendations for speeds and feeds. For high-reliability milling with Walter Tools’ Tiger·tec Silver WKP35S grade, contact Metav Werkzeuge for tailored selection advice and stock availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TPJW1604PPN-WKP35S-WALTER Label: Fräswendeschneidplatte TPJW1604PPN WKP35S Walter Tools Manufacturer: Walter Tools Facts Insert size: 16 mm Thickness: 4.0 mm Clearance angle: 11° Insert form: Triangle 60° Tolerance class: J Special features Series: Tiger·tec Silver Grade: WKP35S Material: coated carbide Suitable for: Stahl (P) and cast iron (K) Execution: W ISO designation: TPJW1604PPN WKP35S FAQ Is this insert suitable for machining hardened materials? The TPJW1604PPN WKP35S is designed for machining Stahl and cast iron; it is not specified for use on hardened steels above typical pre‑hardened ranges. What are the main benefits of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the TPJW1604PPN WKP35S improves wear resistance and thermal stability, supporting longer service life and more consistent performance in milling operations. Which insert form and angles does this product use? This insert has a triangle 60° form combined with an 11° clearance angle, providing a robust cutting geometry for general milling tasks. Can the insert be used for finishing operations? The coated carbide grade WKP35S is balanced for wear resistance and edge stability; it can be used for semi‑finishing and many finishing tasks depending on application parameters and machine stability. How is the TPJW1604PPN WKP35S identified in tooling systems? The insert is listed under the ISO designation TPJW1604PPN WKP35S and is part of the Tiger·tec Silver series from Walter Tools. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation with our company. The offered article is an original, factory‑new product of the manufacturer. The Walter AG brand (Walter Tools) is part of the Sandvik Group and represents precision tools for metalworking.
TPJW1604PPN WPP35G Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Gold coated grade and the WPP35G wear‑resistant geometry for consistently stable chip formation and long tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPJW1604PPN WPP35G — milling indexable insert, coated carbide for steel by Walter Tools The TPJW1604PPN WPP35G is a triangular milling insert designed for productive roughing and versatile steel machining with Tiger‑tec Gold coating for extended life High wear resistance WPP35G grade Tiger‑tec Gold coating for stable cutting Triangular 60° shape for three effective cutting edges 11° relief angle for secure chip control Productivity gains from a coated carbide grade The combination of a coated carbide body and the Tiger‑tec Gold technology delivers measurable advantages in steel machining. The coating reduces flank wear and supports a stable cutting edge, which translates into fewer insert changes and higher machine uptime. This geometry is particularly suited to operations where predictable chip formation and consistent metal removal rates are required. The result is improved process reliability and reduced tooling costs per component. Robust geometry for reliable chip formation A triangular 60° insert form provides three usable corners, increasing the number of cutting edges per insert and improving economy. The moderate 11° relief angle promotes controlled chip breaking during interrupted cuts and roughing passes, reducing the risk of edge chipping in demanding steel applications. Operators benefit from repeatable performance when switching from batch to batch, while production planners gain from predictable tool life and reduced downtime. Tailored for steel machining with clear application benefits Specifically developed for machining steel, this grade balances hardness and toughness to cope with typical heat and chip‑formation patterns. When machining unalloyed and alloyed steels, the insert’s profile supports efficient heat dissipation and stable wear progression. For workshops aiming to optimise cycle times without compromising surface integrity, the insert’s characteristics contribute to reliable material removal and consistent component quality. Practical advantages in the shop floor environment Using this indexable insert simplifies tooling logistics through its universal suitability for common steel families and its repeatable wear behaviour. The insert’s form factor and grade support straightforward seat setting and monitoring within existing toolholders, allowing a smooth integration into production lines. Maintenance teams benefit from fewer imbalances in process capability and clearer criteria for insert replacement, supporting both quality control and throughput objectives. For high‑productivity steel milling with Walter Tools’ Tiger‑tec Gold grade, contact Metav Werkzeuge for supply and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TPJW1604PPN-WPP35G-WALTER Name: TPJW1604PPN WPP35G Type: milling indexable insert Manufacturer: Walter Tools Facts Relief angle: 11° Insert form: Triangular 60° Size: 16 Thickness: 04 Tolerance class: J Special features Grade: WPP35G Coating technology: Tiger‑tec Gold Material application: Steel Construction: coated cemented carbide Execution: W FAQ What materials is the TPJW1604PPN WPP35G designed for? The TPJW1604PPN WPP35G is engineered primarily for steel machining, optimised for common unalloyed and alloyed steels according to ISO group P for reliable chip control. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, which enhances edge life and supports consistent cutting forces during aggressive milling operations. Can the triangular 60° shape be used for roughing and finishing? The triangular 60° geometry offers multiple cutting edges and is best applied to roughing and semi‑finishing passes where robust edge strength and economical edge usage are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not indicate any affiliation. The offered article is original, brand‑new goods from the manufacturer.
TPJW2204PPN WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP35S grade for reliable machining of steel and cast iron; the triangle 60° geometry with an 11° relief angle ensures stable chip control and consistent edge life — order the insert directly via Metav Werkzeuge or consult our tooling specialists for process optimisation. TPJW2204PPN WKP35S — Milling insert (Triangle 60°, Tiger‑tec Silver) by Walter Tools TPJW2204PPN WKP35S is a triangular milling insert designed for productive machining of steel and cast iron, offering a wear‑resistant coating and geometry tuned for stable chip formation. Tiger‑tec Silver coating for wear resistance Grade WKP35S for steel and cast iron Triangle 60° geometry for stable cutting 11° relief angle for secure chip flow Enhanced wear resistance for extended insert life The Tiger‑tec Silver coating and the WKP35S composition combine to provide high resistance against abrasive wear and thermal loads typical when cutting steel and cast iron. This coated‑carbide technology reduces flank wear and maintains cutting edge integrity over longer cycles. For production environments, that translates into fewer indexings and reduced tool change frequency, so machining runs remain productive and predictable. The term "coated carbide" refers to a hard substrate with a thin, engineered coating that improves surface hardness and friction characteristics during cutting. Geometry engineered for consistent chip control and surface quality The triangle 60° plate form and the 11° relief angle create a robust cutting edge suitable for interrupted cuts and varied milling passes. The insert’s geometry supports controlled chip formation and evacuation when machining typical P and K materials, lowering the risk of built‑up edge and inconsistent finishes. The tolerance class J ensures repeatable dimensions across tool changes, which is essential for maintaining part accuracy in multi‑shift production. In practice, this means stable process windows and fewer adjustments at the machine. Robust choice for industrial milling operations Designed for productive applications, this insert delivers a balance of process security and cost efficiency. The combination of coating, grade and geometry makes it suitable for a broad spectrum of catalogue‑geometries and cutting conditions encountered in general machining shops and manufacturing cells. Where productivity and consistent surface finish are priorities, the insert supports higher metal removal rates while preserving edge life. The clear material designation P / K indicates focus on steel and cast iron machining, helping engineers select the correct grade for their workflow. For specific cutting data, availability and application‑matched advice on Walter Tools TPJW2204PPN WKP35S, contact Metav Werkzeuge for personalised tooling recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TPJW2204PPN-WKP35S-WALTER Product type: Milling insert Series: Tiger‑tec Silver Grade: WKP35S Material designation: P / K Manufacturer: Walter Tools Core data Plate form: Triangle 60° Size designation: 22 Plate thickness: 04 Relief angle: 11° Tolerance class: J Special features Coated carbide grade WKP35S Suitable for steel (P) and cast iron (K) Execution: W Part of Tiger‑tec Silver product family FAQ What materials is this insert intended for? The TPJW2204PPN WKP35S insert by Walter Tools is specified for steel (P) and cast iron (K), matching the WKP35S grade and Tiger‑tec Silver coating for those material groups. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating on the insert reduces abrasive wear and improves thermal resistance, which in turn extends edge life and supports longer continuous machining runs with stable performance. What does the Triangle 60° geometry mean for my milling process? The triangle 60° form offers three cutting edges per insert and a robust edge geometry that is particularly effective for interrupted cuts and applications requiring consistent chip control. Is the insert suitable for heavy‑duty roughing or finishing? With its WKP35S grade and Triangle 60° geometry, the insert is suited to productive milling tasks; cutting parameters should be selected according to the workpiece material and machine capability to favour either roughing or finishing. What does tolerance class J indicate? The tolerance class J designates dimensional consistency across production batches, supporting repeatable tool indexing and maintaining part accuracy in serial machining operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanation; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
TPJW2204PPN WPP35G Wendeplatten - Walter Tools
Take advantage of a balance between longer edge life and consistent performance: the Tiger·tec Gold grade WPP35G delivers wear resistance and toughness for productive steel milling. The combination of a triangle 60° geometry and an 11° relief angle supports stable cuts and predictable insert indexing. Order directly via Metav Werkzeuge or consult the team for application advice. TPJW2204PPN WPP35G — Milling indexable insert, triangle 60°, Tiger·tec Gold, Walter Tools A TPJW2204PPN WPP35G indexable milling insert designed for reliable, high-performance machining of steel in general milling applications. Tiger·tec Gold coated carbide grade WPP35G Triangle 60° geometry for three cutting corners 11° relief for reduced cutting forces Optimised for machining steel (ISO group P) Maximise uptime with a wear-resistant coated grade The combination of the Tiger·tec Gold coating and the WPP35G formulation provides a balanced mix of wear resistance and toughness tailored for steel machining. This coated carbide grade is developed to withstand the thermal and mechanical demands typical when cutting steels, which results in longer edge life and fewer insert changes during production runs. The result is a measurable improvement in process stability and tool utilisation. Stable cutting geometry for repeatable results The triangle 60° shape offers three indexable cutting corners per insert, enabling rapid rotation and economical use of the insert life. The measured 11° relief angle reduces axial cutting forces and helps maintain a controlled chip flow in many milling conditions. Together with the specified tolerance class J, the geometry ensures consistent seating and repeatability in toolholders, which supports accurate production and reduces setup variation. Broad suitability across steel machining tasks Engineered for ISO group P materials, the grade covers unalloyed and alloyed steel categories commonly encountered in workshop and industrial settings. The insert is supplied in the designation 04 thickness and size 22, execution W, offering a compact package that integrates easily into established milling tool assemblies. The result is a versatile option for finishing and light to medium roughing where a reliable, general-purpose steel grade is required. Predictable tool cycles and brand-backed reliability Using a consistent, coated grade simplifies tool management and planning: predictable wear behaviour and clear indexation reduce unexpected downtime. Walter Tools’ standing in precision tooling adds a trusted dimension to procurement choices, emphasising productive machining and repeatable surface quality. For operations seeking to increase throughput while maintaining finish standards, this insert supports rational optimisation of cutting parameters and replenishment intervals. Discuss application requirements with Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TPJW2204PPN-WPP35G-WALTER Product name: Fräswendeschneidplatte TPJW2204PPN WPP35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Facts Geometry: Triangle 60° Relief angle: 11° Size designation: 22 Thickness designation: 04 Tolerance class: J Special features Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO group P) Execution: W Indexable insert for milling operations FAQ What materials is this insert suitable for? The TPJW2204PPN WPP35G is formulated for steel machining and corresponds to ISO group P for unalloyed and alloyed steels. How many cutting edges are available per insert? The triangular 60° geometry provides three indexable corners, allowing rotation to fresh cutting edges when required. What benefits does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating enhances wear resistance and edge stability under the heat and loads typical of steel milling, improving insert life and process consistency. How does the relief angle affect machining? The 11° relief reduces cutting forces and contributes to a more stable chip formation, which aids in achieving predictable cutting behaviour in many milling applications. Is the insert compatible with standard toolholders? With tolerance class J and standard form factors, the insert fits holder systems designed for the TPJW2204 series; correct holder matching is advised for optimal seating. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the named manufacturers; the offered item is an original, factory-new product of the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com