TS09-IR1.0ISO WMP32G Wendeplatten - Walter Tools
Die Kombination aus der Tiger‑tec Gold‑Beschichtung und der WMP32G‑Sorte sorgt für zuverlässige Spanbildung und eine stabile Schneidkante bei der Zerspanung von rostfreier Stahl; dies verbessert die Prozesssicherheit und reduziert Werkzeugwechselintervalle. Für technische Beratung und Verfügbarkeit steht Metav Werkzeuge zur Verfügung. TS09-IR1.0ISO WMP32G — Indexable turning insert, Tiger‑tec Gold, for rostfreier Stahl · Walter Tools TS09-IR1.0ISO WMP32G is an indexable turning insert designed for turning applications in rostfreier Stahl and medium to robust cutting conditions Tiger‑tec Gold for extended edge life Optimised chip control IR1.0ISO geometry Suited to rostfreier Stahl machining Walter Tools grade WMP32G, coated carbide Consistent machining performance for rostfreier Stahl The combination of the IR1.0ISO chipbreaker and the WMP32G coated carbide grade delivers consistent chip formation when machining rostfreier Stahl, a material class prone to built‑up edge and high thermal loads. The geometry reduces chip entanglement and stabilises the cutting process, which in turn lowers the risk of unexpected downtime. For shop floors requiring reproducible turning results, the insert’s design focuses on performance predictability and stable tool life rather than experimental or niche advantages. Long edge life and cost-efficient tool use Equipped with the Tiger‑tec Gold technology, the insert provides improved wear resistance and a robust cutting edge suited to medium to robust conditions. This coating technology supports longer intervals between indexings and replacements, translating to fewer interruptions in production. The economic benefit arises from reduced tool handling and more productive machining cycles while maintaining surface quality and dimensional control that meet industrial tolerances. How the IR1.0ISO chipbreaker aids productivity The IR1.0ISO chipbreaker is configured to break and evacuate chips effectively under the thermal and material flow conditions typical for rostfreier Stahl. By promoting short, controllable chips and preventing stringing, machine cycle times become more predictable and tool engagement is safer. For operators less familiar with chipbreaker terminology: the geometry dictates how the chip curls and breaks, directly influencing machine uptime and surface finish. Integration and typical turning applications This indexable insert is intended for standard turning operations where reliable chip control and edge stability are priorities. The coated carbide grade WMP32G is optimised for the demands of rostfreier Stahl and supports consistent performance across batch and single‑piece production. Integration into a typical toolholder is straightforward thanks to the ISO designation TS09-IR1.0ISO WMP32G, which aligns with common insert seatings and clamping systems used in modern turning centres. Contact Metav Werkzeuge for application advice and availability of Walter Tools Tiger‑tec Gold inserts and specific setup recommendations Technical data Article number: TS09-IR1.0ISO-WMP32G-WALTER Designation: TS09-IR1.0ISO WMP32G Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Facts SKU / UID: TS09-IR1.0ISO-WMP32G-WALTER Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR1.0ISO Special features Coated carbide grade WMP32G Optimised for rostfreier Stahl machining Stable chip formation and reliable cutting edge Designed for medium to robust cutting conditions ISO designation TS09-IR1.0ISO WMP32G FAQ What materials is this insert designed for? The TS09-IR1.0ISO WMP32G insert is designed primarily for rostfreier Stahl and performs well under the thermal and mechanical demands of such materials. What benefits does the Tiger‑tec Gold technology provide? Tiger‑tec Gold on the WMP32G grade offers improved wear resistance and a robust cutting edge, extending tool life and reducing changeover frequency for Walter Tools inserts. How does the IR1.0ISO chipbreaker affect machining? The IR1.0ISO chipbreaker promotes short, controllable chips, improving evacuation and reducing the likelihood of chip‑related interruptions during turning. Is this insert suitable for general production turning or only specialised tasks? The insert is intended for standard turning operations where process stability and consistent surface quality are required, making it suitable for both batch and continuous production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods of the manufacturer.
TS09-IR1.25ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable chip control and extended tool life in rostfreier Stahl turning; order the insert directly via Metav Werkzeuge or consult our experts for process optimisation. TS09-IR1.25ISO WMP32G indexable turning insert — for rostfreier Stahl machining (Walter Tools) TS09-IR1.25ISO WMP32G is an indexable turning insert engineered for secure chip formation and consistent performance in demanding rostfreier Stahl applications Tiger·tec Gold coating for longer tool life WMP32G grade optimised for rostfreie Stähle IR1.25ISO chipbreaker for predictable chips Coated cemented carbide for robust cutting High-process reliability for rostfreier Stahl turning The combination of Tiger·tec Gold technology and the WMP32G grade provides a balanced solution for machining rostfreier Stahl: the coated cemented carbide substrate resists built-up edge formation and withstands elevated temperatures common when cutting these tough alloys. The IR1.25ISO chipbreaker is designed to promote stable chip formation, which reduces interruptions and improves surface finish. For production environments requiring repeatable results, this insert supports higher effective cutting parameters and fewer unplanned tool changes, translating into measurable cycle-time savings and more predictable process windows. Consistent performance and extended tool life Thanks to the coating system and tailored substrate chemistry, this insert delivers extended tool life under moderate to robust operating conditions. The WMP32G formulation aims to maintain a stable cutting edge when facing the adhesion and work-hardening tendencies of rostfreier Stahl. As a consequence, downtime for tool exchange is reduced and edge integrity remains consistent across longer runs. The result is improved productivity per toolholder and a lower total cost of ownership in series production or job-shop work where rostfreier Stahl components are frequent. Seamless integration into existing turning processes The ISO designation TS09-IR1.25ISO WMP32G signals a familiar geometry and a standardised chipbreaker that slots into common toolholders without additional set-up complexity. The insert’s geometry supports controlled swarf and predictable cutting forces, aiding toolpath planning and machine load management. For process engineers and shop-floor planners, the insert offers a pragmatic route to stabilise rostfreier Stahl turning operations while maintaining compatibility with established clamping systems and cutting data sheets. Technical consultants at Metav Werkzeuge can advise on cutting parameters aligned with machine power and workpiece conditions. Contact Metav Werkzeuge today to discuss how Walter Tools Tiger·tec Gold inserts like the TS09-IR1.25ISO WMP32G can improve rostfreier Stahl machining reliability and to request tailored application guidance from our specialists Technical data SKU: TS09-IR1.25ISO-WMP32G-WALTER Article: Drehwendeschneidplatte TS09-IR1.25ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR1.25ISO Material group: M (rostfreie Stähle) Special features ISO designation: TS09-IR1.25ISO WMP32G Stable chip formation Coated cemented carbide Suitable for rostfreier Stahl FAQ What materials is this insert best suited for? The TS09-IR1.25ISO WMP32G by Walter Tools is designed primarily for machining rostfreier Stahl, where adhesion and heat generation require a coating and grade that support secure chip control. What does the IR1.25ISO chipbreaker do? The IR1.25ISO chipbreaker geometry promotes predictable chip formation and controlled swarf, helping to maintain surface quality and reduce the risk of entangling chips in rostfreie Stahl turning operations. Is the WMP32G grade coated? Yes, WMP32G is a coated cemented carbide grade within the Tiger·tec Gold family, engineered to balance wear resistance with edge stability under the thermal and mechanical loads of rostfreie Stahl machining. Can this insert be used for interrupted cuts? The combination of the WMP32G grade and the Tiger·tec Gold coating enhances robustness for moderate interrupted cuts, offering improved resistance to edge chipping compared with uncoated grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS09-IR1.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
A reliable combination of a modern coating and a chip control geometry ensures stable cutting edges and consistent performance in demanding stainless-steel applications; order genuine Walter Tools inserts through Metav Werkzeuge or consult our technical team for tailored recommendations. TS09-IR1.5ISO WMP32G indexable turning insert for stainless steel machining — Walter Tools TS09-IR1.5ISO WMP32G is an indexable turning insert designed for secure chip formation and reliable performance when machining stainless steels in medium to robust conditions Tiger·tec Gold coating for extended tool life WMP32G grade for stainless-steel applications IR1.5ISO chipbreaker for predictable chip control Stable cutting edge and consistent performance Greater process reliability through optimised coating and grade The combination of the Tiger·tec Gold coating with the WMP32G carbide grade delivers a measurable improvement in resistance to built-up edge and flank wear, which translates into longer tool life and fewer interruptions on the shop floor. For machining stainless steel, this pairing is particularly beneficial because it reduces heat-affected zones and supports stable cutting conditions under increased friction. The result is a higher level of process reliability and more predictable part quality in serial production. Controlled chip formation for safer, cleaner turning operations The IR1.5ISO chipbreaker geometry is engineered to produce short, controllable chips when turning tough, work-hardening stainless steels. Predictable chip control reduces the risk of entanglement and minimises rework time, while the insert’s geometry supports consistent surface finish. For operations where uptime and operator safety matter, the tailored chipformer ensures that material removal remains efficient and manageable without additional process changes. Practical benefits: efficiency, repeatability and reduced downtime Using this turning insert leads to measurable efficiency gains: fewer insert changes, steadier cutting parameters and less secondary handling. The design supports reproducible cutting edges and a reliable performance window, so set-up times and inspection effort can be reduced. In practice, this means more parts per tool and a smoother production flow — particularly valuable for jobbing and small-batch series where material characteristics vary between workpieces. Contact Metav Werkzeuge for application-specific advice and to obtain Walter Tools Tiger·tec Gold inserts; technical consultants are available by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: TS09-IR1.5ISO-WMP32G-WALTER Designation: TS09-IR1.5ISO WMP32G Type: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR1.5ISO Facts Material group code: M Suitable for ISO group M (stainless steel) Application focus: medium to robust cutting conditions Special features Coating technology: Tiger·tec Gold Carbide type: coated carbide grade WMP32G Chip control geometry: IR1.5ISO Suitable material: stainless steel FAQ What materials is this insert intended for? The TS09-IR1.5ISO WMP32G insert is intended primarily for stainless steel (ISO group M) machining under medium to robust conditions. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and reduces built-up edge, which helps maintain cutting performance and extend tool life in stainless-steel turning. What advantage does the IR1.5ISO chipbreaker provide? The IR1.5ISO chipbreaker creates short, controllable chips that improve process safety and reduce the need for manual chip handling during turning operations. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between our company and the specified brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS09-IR1.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the IR1.75ISO chipbreaker for stable chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TS09-IR1.75ISO WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl (Walter Tools) TS09-IR1.75ISO WMP32G is an indexable turning insert designed to deliver secure chip formation and consistent performance when machining rostfreier Stahl in medium to robust conditions Tiger·tec Gold coating technology WMP32G grade for rostfreier Stahl IR1.75ISO chipbreaker for stable chips Reliable, repeatable edge life Boosted process stability for rostfreier Stahl machining The combination of the Tiger·tec Gold coating and the WMP32G grade provides a balanced solution for rostfreier Stahl, where material toughness and heat generation demand reliable cutting-edge behaviour. The coating supports stable chip formation and reduces the tendency for built-up edge, which is a common issue with these alloys. By favouring a coated carbide design tuned to stainless applications, the insert maintains a secure cutting edge and helps prevent unplanned interruptions in production. The TS09-IR1.75ISO WMP32G is intended for turning operations where consistent results and reduced rework are priorities. Economy through longer tool life and predictable performance An optimised chipbreaker such as IR1.75ISO assists in producing controllable, segmented chips and reduces cutting forces in many stainless applications, which in turn contributes to longer tool life and fewer tool changes. The process reliability that follows from predictable chip evacuation lowers downtime and increases throughput. For production environments aiming to improve OEE, this insert delivers an efficient balance of wear resistance and toughness, allowing for stable cutting parameters under medium to robust cutting conditions. Practical integration in workshop turning operations This indexable insert is suitable for standard turning toolholders and can be applied where rostfreier Stahl workpieces require repeatable surface quality and dimensional control. The stable cutting edge and secure chip control simplify set-up and reduce the need for constant parameter adjustments. For specific cutting data, recommended feeds and speeds, or application advice, Metav Werkzeuge can provide tailored recommendations to fit machine capability and workpiece geometry, ensuring effective integration into daily machining routines. For tailored machining advice and fast, reliable supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: TS09-IR1.75ISO-WMP32G-WALTER Designation: TS09-IR1.75ISO WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Facts Material group: M Applicable material: rostfreier Stahl: Yes Chipbreaker: IR1.75ISO Coating technology: Tiger·tec Gold Special features Coated carbide grade Stable chip formation Suited to medium to robust cutting conditions Designed for turning operations FAQ What materials is this insert suited for? The TS09-IR1.75ISO WMP32G insert is designed primarily for rostfreier Stahl applications and is optimised to handle the toughness and heat-sensitivity typical of those alloys. How does the IR1.75ISO chipbreaker help in production? The IR1.75ISO chipbreaker promotes controlled chip segmentation and evacuation; in the WMP32G grade this supports stable chip formation and reduces the risk of built-up edge, improving process reliability. What advantages does the Tiger·tec Gold technology provide? Tiger·tec Gold coating enhances wear resistance and thermal stability for the WMP32G grade, resulting in improved edge life and more consistent surface quality during turning of rostfreier Stahl. Is this insert compatible with standard turning toolholders? Yes; the TS09-IR1.75ISO WMP32G is an indexable turning insert intended for standard turning toolholders and is suitable for integration into common workshop setups. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TS09-IR13UN WMP32G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold technology and the WMP32G coated-carbide grade for consistently stable chip formation and reliable edge life in demanding stainless-steel turning operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. TS09-IR13UN WMP32G — Drehwendeschneidplatte (indexable turning insert) by Walter Tools, Tiger·tec Gold coating, for stainless steel TS09-IR13UN WMP32G is an indexable turning insert designed for robust machining of stainless steels, offering coated-carbide performance and a specialised chipbreaker for improved process stability Tiger·tec Gold coated carbide grade WMP32G Optimised for stainless-steel turning IR13UN chipbreaker for stable chip control Robust edge life in medium to heavy conditions Greater process reliability with coated-carbide technology The combination of the WMP32G grade and Tiger·tec Gold coating provides a balance of wear resistance and toughness that supports stable machining in stainless steel. Coated carbide reduces friction and the tendency for built-up edge, which is a common challenge with tough, heat-generating alloys. The result is a more predictable tool life and fewer unscheduled tool changes, which directly contributes to improved shop-floor efficiency and repeatable part quality. Fewer interruptions thanks to optimised chip control Equipped with the IR13UN chipbreaker, this insert promotes controlled chip formation when machining ductile materials. A well-designed chipbreaker helps break chips into manageable lengths and reduces the risk of entanglement or re-cutting, therefore lowering cycle-time variability. For production environments requiring consistent spindle uptime, this geometry supports uninterrupted turning cycles and simplifies swarf handling. Practical guidance for selection and use The insert is specified under the ISO-style designation TS09-IR13UN WMP32G, indicating both geometry and grade compatibility. As a coated carbide insert suited to stainless steel, it is intended for medium to robust cutting conditions where thermal and mechanical loads are elevated. When selecting cutting data, prioritise parameters that reduce heat concentration at the cutting edge and consider coolant application where appropriate; these measures help to leverage the Tiger·tec Gold advantages and maintain a stable cutting edge over extended runs. For machining tasks in stainless steel, contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: TS09-IR13UN-WMP32G-WALTER SKU: TS09-IR13UN-WMP32G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR13UN Manufacturer: Walter Tools Material group: M (stainless steel) Facts ISO designation: TS09-IR13UN WMP32G Suitable material group: M (rostfreier Stahl) Coating: Tiger·tec Gold (coated carbide) Application focus: medium to robust cutting conditions Special features Coated carbide grade for wear resistance and toughness Optimised chipbreaker for controlled swarf formation Designed for turning applications in stainless steel Stable cutting-edge behaviour for extended tool life FAQ What material is this insert best suited for? The TS09-IR13UN WMP32G insert by Walter Tools is optimised for machining stainless steel (material group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit the cutting process? Tiger·tec Gold coating on the WMP32G grade reduces friction and improves wear resistance, helping the insert maintain a stable cutting edge and consistent performance during longer machining cycles. What is the role of the IR13UN chipbreaker? The IR13UN chipbreaker promotes controlled chip fragmentation, reducing swarf issues and minimising the risk of chip entanglement, which is particularly useful during continuous turning operations. Can this insert be used for finishing and semi-finishing operations? Yes, the coated-carbide grade and chip control characteristics enable the insert to be used for semi-finishing and, in many cases, finishing passes in stainless-steel turning when cutting parameters are appropriately adjusted. How does this insert contribute to productivity? By offering reliable edge life and improved chip control, the TS09-IR13UN WMP32G reduces tool changes and process interruptions, contributing to steadier cycle times and higher overall productivity on the shop floor. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation with Metav Werkzeuge. The offered article is original, factory-new goods of the respective manufacturer.
TS09-IR14W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated IR14W chipbreaker and robust coated-carbide grade WMP32G for consistent chip control and extended tool life; order directly via Metav Werkzeuge or request tailored advice from their consultants. TS09-IR14W WMP32G indexable turning insert for rostfreier Stahl — Walter Tools TS09-IR14W WMP32G is a coated carbide indexable turning insert designed for the machining of rostfreier Stahl in medium to robust cutting conditions Tiger·tec Gold coated carbide technology Optimised for rostfreie Stähle (M group) IR14W chipbreaker for secure chip control Reliable productivity when machining rostfreier Stahl The combination of Tiger·tec Gold coating and the WMP32G grade provides a stable cutting edge under increased thermal load typical of rostfreier Stahl. The tested coating system reduces flank wear and enhances edge stability, which in turn supports longer uninterrupted cutting intervals and fewer insert changes. For production environments that require predictability, the coated-carbide composition and engineered microstructure of the grade contribute to consistent dimensional results and reduced scrap rates. Precise chip control and process security The IR14W chipbreaker is configured to deliver controlled chip formation with a focus on continuous and tangled chips common when turning rostfreier Stahl. This chip behaviour improves surface finish consistency and reduces the risk of workpiece damage or machine stoppages. Where tool life and repeatability are critical, the insert’s geometry promotes secure chip evacuation, helping to maintain cycle-time stability and minimise operator intervention during extended runs. Ease of selection and integration into machining processes As a standard indexable turning insert, the component integrates with common toolholders and clamping systems used in turning operations. The WMP32G grade, developed for coated-carbide performance in the Tiger·tec Gold series, simplifies grade selection for customers working predominantly with rostfreier Stahl under medium to robust conditions. Application guidance can be provided for cutting parameters and wear monitoring strategies to optimise tool utilisation and maximise productivity. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and availability — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: TS09-IR14W-WMP32G-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR14W Material group: M (rostfreier Stahl) Facts No numerical specifications provided in the dataset Special features Coated carbide grade (Tiger·tec Gold) Optimised for rostfreier Stahl (ISO group M) Designed for medium to robust cutting conditions IR14W geometry for improved chip control Walter Tools original grade and series FAQ What materials is this insert intended for? The TS09-IR14W WMP32G insert is intended primarily for rostfreier Stahl and is specified for ISO material group M. What coating and grade are used on the insert? The insert uses the Tiger·tec Gold coating and the WMP32G coated-carbide grade, providing improved wear resistance and edge stability. How does the IR14W chipbreaker affect machining? The IR14W chipbreaker promotes reliable chip formation and evacuation, reducing the likelihood of built-up edge and improving surface quality when turning rostfreier Stahl. Is this insert suitable for heavy-duty operations? The WMP32G grade and insert geometry are intended for medium to robust conditions; suitability for very heavy-duty turning should be validated with process-specific cutting data. Which brand and product type is this SKU associated with? SKU TS09-IR14W-WMP32G-WALTER refers to a Walter Tools indexable turning insert from the Tiger·tec Gold series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation; there is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
TS09-IR18NPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the IR18NPT chipbreaker to ensure secure chip control and a stable cutting edge when machining stainless steel; order the insert directly via Metav Werkzeuge or consult our advisors for application support. TS09-IR18NPT WMP32G indexable turning insert — Tiger·tec Gold coating, IR18NPT chipbreaker (Walter Tools) The TS09-IR18NPT WMP32G is an indexable turning insert engineered for reliable machining of stainless steel under medium to robust cutting conditions, combining a coated carbide grade with a dedicated chipbreaker for improved process stability. Tiger·tec Gold coating WMP32G IR18NPT chipbreaker for secure chip control Optimised for stainless steel machining Stable cutting edge for consistent performance Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WMP32G grade delivers enhanced wear resistance and improved thermal stability during turning operations. Coated carbide inserts reduce abrasive and adhesive wear on the cutting edge, which in turn extends tool life and lowers the frequency of index changes. For production runs on stainless steels this means fewer interruptions and more consistent component quality, as the coating supports a stable cutting edge and predictable tool behaviour even when temperatures rise. Predictable chip formation and better surface quality The IR18NPT chipbreaker is designed to manage chips efficiently when machining the M group (stainless steels per ISO 513), a material class known for its tendency to build up on the edge and to work-harden. A reliable chip control geometry reduces the risk of built-up edge and improves evacuation, which helps to maintain a consistent surface finish and reduces rework. Clear chip formation also contributes to safer machining conditions and less toolholder contamination, increasing overall shop-floor efficiency. Application-focused design for production stability As an indexable turning insert from the Tiger·tec Gold series, this grade is tailored for medium to robust applications in stainless steel. The coated carbide construction provides a balance between toughness and wear resistance, offering a dependable solution where process reliability matters. Integrating this insert into a stable machining setup supports repeatable part quality and predictable tool change intervals, which benefits throughput and planning in batch production environments. For production environments requiring dependable stainless-steel turning, contact Metav Werkzeuge to specify the TS09-IR18NPT WMP32G insert from Walter Tools and arrange procurement or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS09-IR18NPT-WMP32G-WALTER Name: Drehwendeschneidplatte TS09-IR18NPT WMP32G Walter Tools Type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR18NPT Material grade code: M Data ISO material group: M (stainless steels) Application conditions: medium to robust Coating status: coated carbide Special features Coating technology: Tiger·tec Gold Designed for secure chip control Suitable for machining stainless steel per ISO 513 Stable cutting edge for consistent performance FAQ What materials is this insert suited for? The TS09-IR18NPT WMP32G insert is specifically suited for stainless steel (ISO group M) applications and is engineered to manage the challenges associated with these materials. What does the IR18NPT chipbreaker achieve? The IR18NPT chipbreaker improves chip control and reduces the likelihood of built-up edge during turning operations on stainless steel, contributing to better surface finish and safer chip evacuation. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and thermal stability, which supports longer tool life and more consistent cutting-edge performance in demanding turning tasks. Is this insert suitable for finishing or roughing operations? The insert is optimised for medium to robust cutting conditions; its balance of toughness and wear resistance makes it appropriate for applications where process stability and reliable edge life are priorities. Which SKU should be ordered for this item? Order reference SKU TS09-IR18NPT-WMP32G-WALTER when procuring the Walter Tools indexable insert described above. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered article is an original factory-new product from the manufacturer.
TS09-IR18UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G cutting grade and the IR18UN chipbreaker to secure stable machining of rostfreier Stahl with reduced downtime; order genuine inserts or consult Metav Werkzeuge for application advice. TS09-IR18UN WMP32G – indexable turning insert for rostfreier Stahl (Walter Tools) The TS09-IR18UN WMP32G is an indexable turning insert designed for reliable performance in medium to robust stainless machining applications, optimised for secure chip formation and extended edge life. Tiger·tec Gold coating for robust performance Grade WMP32G for rostfreier Stahl machining Reliable chip control via IR18UN breaker Consistent edge life and stable cutting Consistent performance with modern coating technology The combination of the Tiger·tec Gold coating and the WMP32G grade provides a balance of thermal resistance and toughness that is particularly suited to the challenging cutting behaviour of rostfreier Stahl. The coating reduces abrasive wear and helps maintain cutting-edge integrity, which directly translates into more predictable machining cycles and improved surface finish. For users new to coated grades: the multilayer finish acts as a thermal and wear barrier, slowing tool wear under elevated temperatures typical of stainless cutting. Predictable chips and fewer process interruptions The insert’s IR18UN chipbreaker geometry was developed to produce controlled, segmented chips that evacuate reliably from the cutting zone. Better chip control lowers the risk of built-up edge and reduces interruptions caused by tangled chips or rework. As a result, cycle times become more consistent and maintenance intervals are extended — a rational benefit for production environments that prioritise throughput and repeatability. Practical advantages for everyday workshop use As an indexable turning solution from Walter Tools, this insert is suitable for serial production and mixed-batch operations where process security is essential. The coated carbide composition supports longer edge life and steadier tool-change intervals, reducing unplanned stoppages. Selection guidance: choose this series when machining rostfreier Stahl under medium to heavy conditions and when consistent surface quality and repeatable tool performance are priorities. Contact Metav Werkzeuge for tailored application advice on the Walter Tools TS09-IR18UN WMP32G series — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility, toolholder requirements and series availability Technical Data SKU: TS09-IR18UN-WMP32G-WALTER Product: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR18UN Manufacturer: Walter Tools Facts Suitable material group: rostfreier Stahl (M) Coating technology: Tiger·tec Gold Special features Coated carbide cutting grade Optimised chip control geometry IR18UN Designed for medium to robust cutting conditions Consistent edge life and process stability FAQ What materials is this insert designed for? The TS09-IR18UN WMP32G insert is designed primarily for machining rostfreier Stahl (ISO group M), where toughness and heat build-up require secure chip formation and stable cutting edges. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WMP32G grade increases thermal resistance and reduces abrasive wear, enabling longer edge life and more consistent surface finishes when working with stainless alloys. What is the role of the IR18UN chipbreaker? The IR18UN geometry promotes segmented, controllable chips and reliable evacuation, which reduces build-up on the edge and lowers the likelihood of downtime caused by poor chip control. Is this insert suitable for serial production? Yes, the combination of the WMP32G grade and the IR18UN chipbreaker makes the insert well suited to serial and mixed-batch turning operations where process stability and predictable tool life are required. Can this insert be used for heavy material removal? The insert is optimised for medium to robust cutting conditions; for extremely aggressive heavy removal, assessment of cutting parameters and toolholder setup is recommended to ensure performance and tool life. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are used solely for explanation. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
TS09-IR19BSPT WMP32G Wendeplatten - Walter Tools Technische Daten - Beschichtung: Tiger·tec Gold - Material: Beschichtetes Hartmetall - Einsatzgebiet: Rostfreier Stahl - Sortenkennzeichnung: WMP32G - Spanbrecher: IR19BSPT - Serie: Tiger-tec Gold
TS09-IR19BSPT WMP32G Drehwendeschneidplatte für rostfreien Stahl von Walter Tools Die TS09-IR19BSPT WMP32G ist eine präzise ausgelegte Drehwendeschneidplatte zur produktiven Zerspanung von rostfreiem Stahl, entwickelt für mittlere bis robuste Schnittbedingungen. Tiger·tec Gold Beschichtung für stabile Schneidkante Optimiert für die Zerspanung von rostfreiem Stahl IR19BSPT Spanformer für kontrollierte Spanbildung Hohe Standzeit und konstante Prozesssicherheit Original Walter Tools Qualität und Serienzuordnung Höhere Produktivität durch beschichtete Hartmetallsorte Die Wendeschneidplatte nutzt die Tiger·tec Gold Beschichtung in der Sorte WMP32G, eine beschichtete Hartmetallsorte, die speziell für die Anforderungen bei rostfreiem Stahl entwickelt wurde. Durch die Kombination aus Beschichtung und Trägerwerkstoff wird die Schneidkante widerstandsfähiger gegen Aufbauschneiden, was die Standzeit erhöht und Rüstzyklen reduziert. Die gezielte Oberflächenbehandlung unterstützt eine kontrollierte Spanbildung, wodurch Nacharbeit und Stillstandzeiten sinken. Prozesssicherheit und zuverlässige Spanabfuhr Der integrierte IR19BSPT Spanformer sorgt für definierte Spanbruchbedingungen, die bei zähen Werkstoffen wie rostfreiem Stahl besonders wichtig sind. Stabilere Späne führen zu weniger Vibrationen und verbessern die Oberflächengüte des Werkstücks sowie die Werkzeuglebensdauer. Fertigungsbetriebe profitieren dadurch von konstanter Fertigungsqualität und planbaren Standzeiten bei Serien- und Einzelfertigung. Einsatzprofil und Zielgruppe Die Platte richtet sich an Lohnfertiger, Maschinenbauer und Inhouse-Werkstätten, die rostfreien Stahl in mittleren bis robusten Zerspanungsbedingungen bearbeiten. Typische Anwendungen sind Schaftbearbeitungen, Außenbearbeitung und Aufgaben, bei denen Aufbauschneiden und hohe Wärmeentwicklung auftreten. Durch die robuste Sortenwahl eignet sich das Produkt für reproduzierbare Ergebnisse unter industriellen Prozessbedingungen. Material- und Sortenerklärung für Einsteiger Für Anwender mit weniger Erfahrung: WMP32G ist eine Hartmetallsorte mit Beschichtung; die Beschichtung reduziert Reibung und thermische Belastung an der Schneidkante. Die Kennzeichnung M bedeutet, dass die Platte für die Bearbeitung von rostfreien Stählen geeignet ist. Der Begriff Spanformer bezeichnet die Formgeometrie, die den Span zerlegt und abführt, was besonders bei zähen Werkstoffen entscheidend ist. Empfehlung: Für zuverlässige, wirtschaftliche Bearbeitung von rostfreiem Stahl die Tiger·tec Gold Sorte WMP32G von Walter Tools einsetzen und bei technischen Fragen die Metav Beratung kontaktieren: info@metav-werkzeuge.com, Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: TS09-IR19BSPT-WMP32G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Sorte: WMP32G Bezeichnung: TS09-IR19BSPT WMP32G Fakten Besonderheiten Beschichtung: Tiger·tec Gold (beschichtetes Hartmetall) Spanformer: IR19BSPT Bearbeitbare Werkstoffgruppe: M (rostfreie Stähle) Sorteneinsatz: mittlere bis robuste Einsatzbedingungen Eigenschaften: stabile Spanbildung, hohe Prozesssicherheit, gute Standzeit FAQ Was zeichnet die TS09-IR19BSPT WMP32G im Vergleich zu Standardplatten aus? Die TS09-IR19BSPT WMP32G von Walter Tools kombiniert die Tiger·tec Gold Beschichtung mit einem spezialisierten Spanformer (IR19BSPT), was zu verbesserter Schneidkantenstabilität und geringerer Neigung zu Aufbauschneiden bei rostfreiem Stahl führt. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Primär für rostfreie Stähle (Werkstoffgruppe M). Die Sorte WMP32G wurde gezielt für die Herausforderungen dieser Werkstoffe entwickelt und bietet zuverlässige Spanbildung und Standzeit. Wie trägt die Beschichtung zur Wirtschaftlichkeit bei? Die Tiger·tec Gold Beschichtung reduziert Verschleiß und Temperaturbelastung an der Schneidkante. Weniger Werkzeugwechsel und konstante Bearbeitungsergebnisse steigern die Produktivität und reduzieren die Betriebskosten. Kann die Platte in Serienfertigung eingesetzt werden? Ja. Die Kombination aus stabiler Spanbildung und hoher Prozesssicherheit macht die TS09-IR19BSPT WMP32G (SKU TS09-IR19BSPT-WMP32G-WALTER) für Serien- und Losgröße-eins-Bearbeitung geeignet. Wer bietet technische Beratung zur Anwendung an? Bei Fragen zur Anwendung der TS09-IR19BSPT WMP32G hilft die Metav Beratung weiter; alternativ stehen die technischen Informationen des Herstellers Walter Tools zur Verfügung. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS09-IR19W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and a chipbreaker engineered for stable chip formation — ideal for demanding stainless steel machining; order directly via Metav Werkzeuge or consult our specialists for application advice. TS09-IR19W WMP32G — indexable turning insert for rostfreier Stahl (Walter Tools, Tiger·tec Gold) The TS09-IR19W WMP32G is an indexable turning insert optimised for machining rostfreier Stahl in medium to robust conditions, offering predictable chip control and consistent edge life. Tiger·tec Gold coating technology WMP32G grade for rostfreier Stahl Coated carbide for enhanced edge stability Reliable chip formation in tough conditions Increased productivity with consistent chip control The Tiger·tec Gold series delivers an excellent balance between wear resistance and thermal stability, which directly improves cycle times when machining rostfreier Stahl. The WMP32G grade, a coated carbide formulation, is tuned to resist the adhesion and built-up edge tendencies typical of stainless alloys; this results in fewer interruptions for tool changes and more predictable component dimensions. In practice, stable chip formation from the IR19W chipbreaker reduces machining disturbances and helps maintain a steady feed rate, supporting higher overall throughput. Longer effective tool life through advanced coating technology A modern coating reduces flank wear and protects the cutting edge at elevated temperatures. The Tiger·tec Gold technology on this insert enhances hardness at the cutting zone while preserving toughness behind the edge, which means fewer resharpening cycles and lower tool consumption over a production run. For manufacturers, this translates to reduced tooling costs per component and improved process reliability; the combination of coating and substrate aims to deliver repeatable performance across shifts and batches. Practical guidance for typical applications This grade is specified for rostfreie Stähle and is appropriate where workpieces produce sticky chips and generate significant heat. Use moderate depth of cut combined with appropriate coolant strategies to exploit the insert’s stability; the IR19W chipbreaker assists with manageable chip segments during turning. Where surface finish and dimensional accuracy are priorities, the insert’s consistent edge stability aids in achieving uniform results with fewer rework cycles, particularly in serial production and component families with similar contact conditions. Why this insert is suitable for production environments The engineered balance of toughness and coating performance makes the insert a dependable choice for operations that prioritise uptime and repeatability. WMP32G supports safe chip formation under tougher engagement conditions and helps avoid sudden tool failures that disrupt schedules. For process engineers, the predictable wear behaviour means easier planning of tool-change intervals and improved integration into established machining cycles. Choose Walter Tools’ Tiger·tec Gold WMP32G insert for demanding rostfreier Stahl applications — contact Metav Werkzeuge for tailored cutting data and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS09-IR19W-WMP32G-WALTER Designation: TS09-IR19W WMP32G Product type: Indexable turning insert Brand: Walter Tools Facts Grade: WMP32G Chipbreaker: IR19W Material group suitability: M (rostfreie Stähle) Special features Series: Tiger·tec Gold Substrate/coating: coated carbide (beschichtetes Hartmetall) Application: machining rostfreier Stahl Intended use: medium to robust cutting conditions FAQ What materials is this insert intended for? The TS09-IR19W WMP32G insert is specified for machining rostfreier Stahl and performs best where stainless alloys produce sticky chips and higher cutting temperatures. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WMP32G grade increases thermal stability and wear resistance, which extends effective tool life and contributes to consistent part quality over long runs. Which chipbreaker is integrated and what is its effect? The IR19W chipbreaker on this insert promotes reliable chip segmentation for turning rostfreier Stahl, reducing entanglement and improving process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. There is no affiliation between our company and the named brands. The mentioned Walter Tools products are original factory-new items from the manufacturer.
TS09-IR2.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold grade WMP32G, the IR2.0ISO chipbreaker and robust performance on stainless steels for reliable production turning. Order the insert via Metav Werkzeuge or contact their consultants for application-specific advice. TS09-IR2.0ISO WMP32G — indexable turning insert for stainless steels (Walter Tools) The TS09-IR2.0ISO WMP32G is a coated carbide indexable turning insert designed for stable machining of stainless steels in medium to robust conditions. Tiger·tec Gold coated carbide grade WMP32G Optimised chip control with IR2.0ISO geometry High process security for stainless steels Consistent edge life for demanding stainless steel turning The combination of the Tiger·tec Gold coating technology and the WMP32G grade provides a balance of wear resistance and edge toughness that is particularly beneficial when machining stainless steels. Coated carbide here means a multi-layer CVD/PVD approach that stabilises the cutting edge and reduces the risk of built-up edge formation. This leads to longer tool life and fewer insert changes, which in turn supports a steady production flow and lower cumulative downtime. The material group classification M indicates that the grade is engineered for the specific challenges of austenitic and other corrosion-resistant alloys. Secure chip control reduces interruptions and improves surface finish The IR2.0ISO chipbreaker geometry focuses on controlled chip formation and evacuation during turning operations. A reliably formed chip minimises tangling and machine stoppages, and helps maintain a stable cutting edge under fluctuating thermal loads typical of stainless steel machining. In practice this reduces secondary operations caused by poor surface quality and lowers scrap rates. When paired with appropriate cutting parameters and rigid clamping, the chipbreaker supports productive material removal with reduced risk of tool edge damage. Practical guidance for selection and process integration Selection of the correct insert grade and chipbreaker has a direct effect on cycle time and repeatability. The TS09-IR2.0ISO WMP32G insert is suited for turning operations where a balance of wear resistance and toughness is required. For adaptation to a specific turning holder, select the matching ISO designation and ensure cutter body geometry supports the IR2.0ISO chip flow. For more detailed recommendations on feeds, speeds and coolant strategy, the supplier Metav Werkzeuge can assist with application-specific data and trials; consultation can help to align the insert choice with component tolerances and cycle-time targets. The TS09-IR2.0ISO WMP32G performs best when integrated into a process focused on stable clamping and consistent coolant delivery. For production-focused stainless steel turning with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS09-IR2.0ISO-WMP32G-WALTER SKU/UID: TS09-IR2.0ISO-WMP32G-WALTER Product type: Indexable turning insert Brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR2.0ISO Material group: M (stainless steels) Designation: TS09-IR2.0ISO WMP32G Facts Material group code: M Intended application: stainless steels Coating technology: Tiger·tec Gold Special features Coated carbide grade for balanced wear resistance and toughness Optimised chip control for stable machining Suitable for medium to robust conditions on corrosion-resistant alloys FAQ What materials is this insert suitable for? The insert is specified for machining stainless steels (ISO group M); the WMP32G grade and Tiger·tec Gold coating support stable cutting in these alloys. What does the IR2.0ISO chipbreaker accomplish? The IR2.0ISO geometry provides controlled chip formation and evacuation, reducing chip entanglement and supporting a consistent cutting edge during turning operations. Is the TS09-IR2.0ISO WMP32G compatible with standard ISO tool holders? Compatibility depends on the holder type and the insert seat; the ISO designation matches standard indexable turning systems when the correct seat and clamping are used. How does Tiger·tec Gold improve performance? Tiger·tec Gold coating technology enhances wear resistance while maintaining edge toughness, which is especially useful when machining heat-generating, tough-to-cut stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS09-IR20UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective coated carbide, stable chip control and proven Tiger‑tec Gold performance for reliable stainless steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. TS09-IR20UN WMP32G indexable insert for stainless steel — Walter Tools, Tiger‑tec Gold TS09-IR20UN WMP32G is an indexable turning insert designed for machining stainless steels under medium to demanding conditions, providing stable cutting edges and consistent chip formation Tiger·tec Gold coating for longer life IR20UN chipbreaker for secure chip control WMP32G grade optimised for stainless steel Walter Tools quality and process stability Consistent productivity through optimised grade and coating The combination of the WMP32G coated carbide grade with the Tiger‑tec Gold coating ensures a measurable increase in process stability when machining stainless steel. The coating reduces friction and supports heat resistance at the cutting edge, which leads to fewer interruptions for edge dressing and a more uniform tool life. This translates into predictable cycle times and reduced rework, making the insert suitable for shops seeking reliable throughput without constant tool intervention. Secure chip control and improved surface finish The IR20UN chipbreaker geometry is engineered to form compact, controllable chips when turning ductile, heat-prone stainless steels. Controlled chip formation reduces the risk of built-up edge and stabilises cutting forces, which contributes directly to improved surface quality and fewer downstream operations. In practice, this results in lower scrap rates and a reduced need for manual finishing, supporting leaner production workflows and higher first-pass yields. Edge stability and economic tool utilisation A coated, wear-resistant carbide substrate underpins the insert’s ability to maintain a sharp, robust cutting edge under fluctuating cutting temperatures typical for stainless steel machining. The WMP32G grade balances toughness and wear resistance to avoid premature chipping while still delivering repeatable performance. For production environments, this balance means fewer insert changes, reduced tool inventory complexity and a tangible improvement in overall tooling cost per component. Seamless integration into standard turning operations The insert is compatible with common tool holders for indexable turning and is intended for straightforward substitution into existing toolsets. Where process optimisation is required, pairing the insert with appropriate cutting data for stainless steels will unlock the full benefit of the Tiger‑tec Gold technology: longer intervals between tool changes and consistent part quality. This makes the insert a practical choice for job shops and production lines aiming to enhance robustness without extensive process requalification. For tailored recommendations on using Walter Tools’ Tiger‑tec Gold inserts or to specify the TS09-IR20UN WMP32G for a particular stainless steel application, contact Metav Werkzeuge for technical guidance and procurement support. Technical data Article number: TS09-IR20UN-WMP32G-WALTER Item designation: Drehwendeschneidplatte TS09-IR20UN WMP32G Walter Tools Manufacturer: Walter Tools Facts Grade: WMP32G Coating technology: Tiger·tec Gold Chipbreaker: IR20UN Material group: M (stainless steels) Special features Coated carbide construction Optimised for medium to robust stainless steel machining Designed for stable chip formation and edge life Suitable for standard indexable turning holders FAQ What materials is this insert intended for? The TS09-IR20UN WMP32G indexable insert is designed primarily for stainless steel, with the WMP32G grade and Tiger‑tec Gold coating providing improved performance when machining these alloys. How does the IR20UN chipbreaker affect machining? The IR20UN chipbreaker promotes compact, manageable chips and helps prevent built-up edge when turning stainless steels, improving surface finish and operational reliability for the Walter Tools insert. Can this insert reduce tool change frequency? Yes, the combination of the WMP32G grade and Tiger‑tec Gold coating is formulated to enhance edge stability and wear resistance, which typically extends the usable life of the insert and reduces changeovers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the brands named. The offered item is an original, new product from the manufacturer.
TS11-IL-A60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the IL‑A60 chipbreaker for reliable chip control and extended tool life when machining stainless steel; order supplies via Metav Werkzeuge or consult their specialists for application-specific selection. TS11-IL-A60 WMP32G indexable turning insert – Tiger‑tec Gold, IL‑A60 chipbreaker (Walter Tools) The TS11-IL-A60 WMP32G is an indexable turning insert designed for robust stainless‑steel machining, delivering secure chip formation and long edge life under medium to heavy cutting conditions. Tiger‑tec Gold coating for enhanced tool life IL‑A60 chipbreaker for secure chip control Suited for stainless steel machining (ISO M) Stable cutting edge under demanding conditions Increased productivity through consistent chip control and coating technology The combination of the Tiger‑tec Gold coating and the WMP32G grade delivers a measurable rise in process stability when machining stainless steel. The coating supports thermal resistance and reduced wear, while the IL‑A60 chipbreaker promotes predictable chip formation, reducing interruptions and secondary operations. For production environments that demand repeatable performance, this insert helps maintain cycle times and minimise tool changes. Practical benefits for workshop reliability and easier process planning With a focus on dependable edge stability, the insert simplifies tool selection for tasks involving stainless steel. The substrate and coating pairing reduce the tendency for built-up edge and edge breakdown, which in turn lowers scrap rates and rework. The design enables technicians and process engineers to plan feeds and speeds with greater confidence, improving throughput and supporting leaner machining strategies. Clear technical scope and suitable applications The cutting material class is a coated carbide grade formulated to address the specific challenges of stainless steel, such as toughness and heat generation. The TS11-IL-A60 WMP32G insert is appropriate for medium to robust cutting conditions and is particularly useful where secure chip control and consistent surface integrity are required. Its geometry and chipbreaker suit turning operations that prioritise chip evacuation and edge life over aggressive metal removal rates. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger‑tec Gold inserts into production and to discuss available stock and delivery options Technical data Article number: TS11-IL-A60-WMP32G-WALTER Designation: TS11-IL-A60 WMP32G Product type: indexable turning insert Manufacturer: Walter Tools Material group: M (stainless steel) Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IL‑A60 UID: TS11-IL-A60-WMP32G-WALTER Core specifications Material group code: M Application standard: ISO M Geometry family: TS11 Special features Coating technology: Tiger‑tec Gold Coated carbide grade: WMP32G Optimised for secure chip formation Intended for medium to robust cutting conditions on stainless steel FAQ What materials is this insert designed for? The TS11-IL-A60 WMP32G insert is formulated for working stainless steel (ISO M), offering enhanced chip control and edge stability in stainless‑steel turning operations. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating increases thermal resistance and wear protection on the WMP32G grade, extending cutting edge life and reducing the frequency of tool changes in demanding stainless applications. Which chipbreaker is fitted and what is its benefit? The insert features the IL‑A60 chipbreaker, which promotes predictable chip formation and evacuation, lowering the risk of entanglement and improving process reliability. Is this insert suitable for heavy roughing cuts? Yes, the geometry and WMP32G grade are intended for medium to robust cutting conditions; planning feeds and depths appropriate to stainless workpieces will achieve best results. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, www.walter-tools.com
TS11-IL0.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a high-performance, Tiger‑tec Gold coated grade and an optimised chipbreaker IL0.5ISO for reliable machining of rostfreien Stahl; the result is improved process stability and fewer tool changes. Order the TS11-IL0.5ISO WMP32G directly via Metav Werkzeuge or ask our consultants for application advice. TS11-IL0.5ISO WMP32G – Indexable turning insert for rostfreien Stahl by Walter Tools The TS11-IL0.5ISO WMP32G is an indexable turning insert engineered for secure chip formation and robust cutting-edge performance when machining rostfreien Stahl in medium to heavy turning operations. Tiger‑tec Gold coated WMP32G grade Optimised chip control for rostfreien Stahl Stable cutting edge under robust conditions Designed for medium to heavy turning operations Consistent performance when machining rostfreien Stahl The WMP32G grade, applied to a coated carbide substrate, is developed to manage the specific challenges of rostfreien Stahl—notably its tendency to work harden and generate heat. Using the TS11-IL0.5ISO WMP32G reduces the risk of built-up edge and supports stable chip formation, which translates into fewer interruptions for tool changes and more consistent part quality. For operations where repeatability matters, this combination delivers measurable advantages in uptime and component consistency. Longer edge life through Tiger‑tec Gold coating The Tiger‑tec Gold technology enhances wear resistance and edge stability under demanding conditions. The coating improves thermal resistance and reduces adhesive wear, which helps to maintain a sharp cutting profile over more cycles. As a consequence, the cutting insert sustains its geometry for longer, supporting higher productivity and a lower number of insert changes per shift. This effect is particularly relevant in series production where tool-life predictability supports efficient planning. Better process stability thanks to the chipbreaker IL0.5ISO The integrated chipbreaker IL0.5ISO is optimised for controlled chip formation with rostfreien Stahl, guiding chips away from the cutting zone and reducing interference with finished surfaces. Good chip control minimises the likelihood of surface defects and machine stoppages, and it simplifies swarf handling at the machine. In practical terms, this means smoother cycles, reduced risk of rework and improved overall process reliability when turning challenging alloys. Practical benefits for workshop and production environments Designed for use in standard indexable insert tool holders, this insert supports straightforward integration into existing turning processes. The combination of coated carbide, a proven grade and a dedicated chipbreaker reduces total tool consumption and contributes to predictable production costs. Suppliers such as Walter Tools supply tools with consistent manufacturing tolerances, facilitating repeatable clamping and predictable performance—advantages that are especially valuable in batch production and tool management routines. For tailored application support or to secure the TS11-IL0.5ISO WMP32G from Metav Werkzeuge, contact the technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for specification and availability guidance Technical Data Article number: TS11-IL0.5ISO-WMP32G-WALTER Name: Drehwendeschneidplatte TS11-IL0.5ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte UID: TS11-IL0.5ISO-WMP32G-WALTER Core specifications Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IL0.5ISO ISO designation: TS11-IL0.5ISO WMP32G Materials & applications Intended for: rostfreien Stahl Substrate: coated carbide Material group: M FAQ Which materials are best machined with this insert? The TS11-IL0.5ISO WMP32G is specified for rostfreien Stahl and performs reliably where heat and work-hardening demand stable chip formation. What does the IL0.5ISO chipbreaker achieve? The chipbreaker IL0.5ISO promotes controlled chips and reduces interference with the machined surface, improving cycle stability and part quality during turning. Is the grade suitable for heavy-duty turning? Yes, the WMP32G grade is designed for medium to robust machining conditions, providing a balance of wear resistance and edge reliability for tougher turning tasks. How does Tiger‑tec Gold affect tool life? The Tiger‑tec Gold coating enhances thermal and adhesive wear resistance, which helps to preserve the cutting edge and extend usable insert life under demanding conditions. Can this insert be used in standard indexable tool holders? The insert is intended for common turning tool holder systems that accommodate TS11-style indexable inserts; ensure correct seat and clamping for optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used here for explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered item is original, factory-new goods from the manufacturer.
TS11-IL0.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for prolonged tool life and dependable chip control when machining stainless steels; its IL0.75ISO chipbreaker supports secure swarf formation under medium to robust cutting conditions. Order the indexable turning insert directly via Metav Werkzeuge or consult the technical team for application advice. TS11-IL0.75ISO WMP32G — indexable turning insert with IL0.75ISO chipbreaker (Walter Tools) TS11-IL0.75ISO WMP32G is an indexable turning insert engineered for reliable machining of stainless steels in medium to robust cutting conditions Tiger·tec Gold coating for long tool life WMP32G grade optimised for stainless steels IL0.75ISO chipbreaker for reliable chip control Consistent performance under medium to robust cuts Durable coating and material pairing for stable production The Tiger·tec Gold series combines a proven coating system with a WMP32G coated-carbide grade to reduce cutting-edge wear and adhesion when machining stainless steels. This pairing stabilises the cutting edge at elevated temperatures and supports consistent component quality across shifts. For operations where surface finish and repeatability matter, the combination reduces unplanned tool changes and contributes to a predictable production rhythm. Predictable chip control and process security The IL0.75ISO chipbreaker is designed to produce compact, controllable swarf in challenging materials. The geometry promotes a steady fragmentation pattern that prevents entanglement and ensures safe evacuation from the cut, improving cycle reliability. By favouring a stable chip form, the insert reduces the risk of built-up edge and helps maintain cutting parameters, which in turn supports higher throughput and fewer stoppages. Application advantages and practical integration As an indexable turning insert for turning applications, the component fits standard ISO-compatible toolholders and is suited for medium to robust roughing and finishing passes in stainless steels. The coated-carbide construction offers a balance between wear resistance and toughness, making the insert a practical choice for shops seeking both tool life and process flexibility. Recommendations for cutting data and holder selection are available to align the insert with specific turning centres and workpiece demands. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts or to check current availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS11-IL0.75ISO-WMP32G-WALTER Designation: TS11-IL0.75ISO WMP32G Label: Drehwendeschneidplatte TS11-IL0.75ISO WMP32G Walter Tools Product type: Drehwendeschneidplatte Grade: WMP32G Series: Tiger-tec Gold Chipbreaker: IL0.75ISO Material group: M Manufacturer: Walter Tools Facts No numerical cutting data provided in the dataset No dimensional specifications provided in the dataset Special features Coated carbide (described as coated hardmetal in the series data) Suited for machining stainless steels Stable chip formation for medium to robust conditions Balanced wear resistance and edge toughness FAQ Which materials is this insert intended for? The TS11-IL0.75ISO WMP32G insert is intended primarily for stainless steels, classified under material group M, and is optimised for the typical challenges of these alloys. What advantages does the Tiger·tec Gold series bring? The Tiger·tec Gold series provides a multiphase coating and grade combination that improves wear resistance, reduces adhesion, and extends the effective tool life of the insert under elevated temperatures. What does the IL0.75ISO chipbreaker do? IL0.75ISO describes the chipbreaker geometry that promotes compact, controllable chips and enhanced chip control, reducing entanglement and improving process security during turning of stainless steels. Is the insert suitable for finishing as well as roughing? The insert performs well in medium to robust cutting conditions; depending on the chosen cutting data and toolholder, it can be applied to both productive roughing passes and stable finishing operations. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Walter Tools is a brand of Walter AG and is referenced here for product identification. Protected trademarks and product names belong to their respective owners. Brand names are mentioned solely for explanatory purposes and do not indicate any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
TS11-IL1.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the IL1.0ISO chipbreaker for stable chip formation and extended edge life; the insert is optimised for machining rostfreier Stahl and supports reliable production results. Order or request advice via Metav Werkzeuge for smooth integration into existing turning processes. TS11-IL1.0ISO WMP32G indexable turning insert for rostfreier Stahl – Walter Tools TS11-IL1.0ISO WMP32G is an indexable turning insert engineered for medium to robust cutting conditions when machining rostfreier Stahl Tiger·tec Gold coated carbide for wear resistance IL1.0ISO chipbreaker for controlled chip formation Optimised for rostfreier Stahl machining Walter Tools original grade WMP32G, Tiger·tec Gold series Consistent chip control for increased throughput The combination of the IL1.0ISO chipbreaker and a coated carbide substrate delivers predictable chip shaping, which reduces interruptions and the need for manual chip management. The chipbreaker geometry was developed to support stable cutting when working with rostfreier Stahl, a group of materials known for toughness and heat generation. By promoting reliable chip evacuation, the insert helps maintain constant cutting conditions; this reduces tool change frequency and can contribute to a smoother production flow and improved process reliability. Durable cutting edge and longer tool life The Tiger·tec Gold coating and the WMP32G grade provide a balanced mix of hardness and toughness that is tailored to the demands of stainless steels. Coated carbide, as used here, combines a hard surface layer for wear resistance with a substrate that resists chipping under intermittent loads. As a result, flank wear develops more evenly and edge life is extended compared with uncoated grades, supporting higher productivity and fewer unscheduled interruptions. This performance translates into measurable savings on tool consumption and set-up time in serial turning operations. Practical compatibility and application advice Designed as an indexable turning insert, the component fits standard turning toolholders that accept the TS11 geometry. The insert is intended for medium to robust cutting applications on rostfreier Stahl where reliable chip control and tool life are priorities. For customers less familiar with chipbreaker functions: the IL1.0ISO design organises chip flow away from the cutting edge and component, reducing re‑work risk and improving surface finish without requiring complex parameter adjustments. When specifying cutting data, start with conservative feeds and speeds appropriate for coated carbide and increase gradually while monitoring edge condition. Contact Metav Werkzeuge to discuss toolholder compatibility, recommend cutting data, or to request sample inserts and technical documentation for Walter Tools products Technical data SKU: TS11-IL1.0ISO-WMP32G-WALTER Article designation: TS11-IL1.0ISO WMP32G Product type: indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Facts Material group: M (rostfreie Stähle) Geometry / chipbreaker: IL1.0ISO Series: Tiger·tec Gold UID: TS11-IL1.0ISO-WMP32G-WALTER Special features Coated carbide grade (beschichtetes Hartmetall) Optimised for stable chip formation Balanced wear resistance and toughness Suitable for medium to robust cutting conditions on rostfreier Stahl FAQ What materials is this insert designed for? The TS11-IL1.0ISO WMP32G insert is optimised for machining rostfreier Stahl and is specified for applications in the ISO material group M. How does the IL1.0ISO chipbreaker improve performance? The IL1.0ISO chipbreaker organises chip flow away from the cutting edge, enabling controlled chip formation and reducing the risk of built-up edge and surface damage during turning. Is the WMP32G grade coated or uncoated? WMP32G is a coated carbide grade within the Tiger·tec Gold range, combining a wear-resistant coating with a substrate engineered for toughness. Can this insert be used for light finishing passes? Yes, the insert performs well in finishing when cutting parameters are adjusted to suit coated carbide; the chipbreaker supports a consistent surface finish under appropriate feeds and speeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS11-IL1.2ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a grade tailored for stainless steel and a dedicated IL1.2ISO chipbreaker to ensure stable machining and reliable edge life; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TS11-IL1.2ISO WMP32G indexable turning insert — Tiger·tec Gold, for stainless steel, Walter Tools TS11-IL1.2ISO WMP32G is an indexable turning insert designed for robust machining of stainless steels and medium to heavy cutting conditions in production and job-shop environments. Tiger·tec Gold coating for extended tool life Optimised for stainless steel (M) machining Stable chip formation under robust conditions Reliable cutting-edge durability Longer tool life through advanced coating technology The combination of Tiger·tec Gold coating with the WMP32G grade delivers a marked improvement in tool life when facing the specific challenges of stainless steel: high toughness, tendency to build up on the edge and elevated heat generation. The insert’s coated carbide substrate resists thermal and abrasive wear, resulting in fewer indexings and longer uninterrupted cutting periods. For operations where consistency and repeatability matter, this means less spindle downtime and a higher throughput per cutting edge. Secure chip control and process stability for consistent productivity With the IL1.2ISO chipbreaker geometry, the insert promotes stable chip formation even under moderate to robust cutting parameters. Stable chips reduce the risk of entanglement and improve surface finish, which lowers secondary operations and rework. The engineered chip flow also helps to maintain a steady cutting force, supporting process security on automated lathes and CNC turning centres. For production managers, this translates into predictable cycle times and more reliable batch output. Practical benefits: integration, handling and predictable performance The grade and geometry are optimised for common turning applications in stainless steels, enabling smooth integration into existing toolholder systems and reducing set-up iterations. The insert’s combination of edge robustness and coating technology supports repeatable part tolerances and extended intervals between tool changes, improving overall cost-efficiency. For operators transitioning from general-purpose grades, the performance gains are tangible in both surface quality and fewer unplanned interventions. Metav Werkzeuge can advise on mounting and cutting data to match individual machine and job requirements. Contact Metav Werkzeuge for tailored cutting data and order support — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data Article number: TS11-IL1.2ISO-WMP32G-WALTER Label: Indexable turning insert TS11-IL1.2ISO WMP32G Walter Tools Type: Indexable turning insert Core data Material group: M (stainless steels) Special features Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IL1.2ISO Suitable for: stainless steel FAQ What materials is this insert suitable for? The TS11-IL1.2ISO WMP32G insert is designed primarily for stainless steel machining; the WMP32G grade supports secure chip formation and edge stability in those materials. How does the Tiger·tec Gold series improve performance? The Tiger·tec Gold coating enhances thermal and abrasive resistance on the coated carbide body, which increases cutting-edge life and reduces the frequency of indexings during production runs. Is the IL1.2ISO chipbreaker suitable for automated turning centres? Yes. The IL1.2ISO geometry promotes predictable chip flow and reduced entanglement, supporting automation and consistent cycle times on CNC turning equipment. Can this insert replace general-purpose grades for tougher stainless operations? For medium to robust stainless-steel conditions, the WMP32G grade offers superior wear resistance and edge robustness compared with many general-purpose grades, leading to fewer tool changes and improved productivity. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory-new product from the stated manufacturer.
TS11-IL1.5ISO WMP32G IL1.5ISO Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold technology, a purpose-designed IL1.5ISO chipbreaker and the WMP32G grade for consistent stainless machining performance; these properties deliver stable chip formation and extended edge life in medium to robust conditions. Order the TS11-IL1.5ISO WMP32G insert directly via Metav Werkzeuge or ask our consultants if needed. TS11-IL1.5ISO WMP32G indexable turning insert for rostfreier Stahl by Walter Tools — Tiger·tec Gold coating, IL1.5ISO chipbreaker TS11-IL1.5ISO WMP32G is a coated indexable turning insert engineered for reliable, productive machining of rostfreier Stahl in medium to robust conditions Tiger·tec Gold coating for improved edge stability WMP32G grade optimised for rostfreier Stahl machining IL1.5ISO chipbreaker for predictable chip formation Coated carbide construction for reliable wear resistance Consistent results when machining rostfreier Stahl The combination of the WMP32G grade and Tiger·tec Gold technology is aimed specifically at the challenges of rostfreier Stahl: material toughness, tendency to build up at the cutting edge and high heat generation. The chemistry and coating sequence of the grade promote controlled wear and reduce adhesion, which supports a stable cutting edge and more predictable tool life. For production environments this means fewer unexpected tool changes and more consistent part quality. Predictable chip control for safer turning operations The IL1.5ISO chipbreaker is optimised to generate manageable chips when turning rostfreier Stahl under medium to robust cutting conditions. Better chip formation reduces the risk of entanglement and improves swarf evacuation, helping maintain process security and surface quality. For users with limited experience of chipbreaker geometry, this design translates into reduced manual intervention and simpler machining routines. Durable, coated carbide construction for productive machining Built as a coated carbide insert, the part benefits from a hard, wear-resistant substrate and the multi-layer Tiger·tec Gold coating that enhances thermal stability and edge protection. This combination supports higher sustained cutting speeds and reliable surface finishes across longer tool lives. The construction is aimed at balancing productivity and cost-efficiency for batch and continuous turning operations. Integration into workshop workflows and tool systems As an indexable turning insert from Walter Tools, the unit integrates easily into standard toolholders and mounting systems used for turning operations. Its designation and chipbreaker make it suitable for shops seeking robust inserts tailored to rostfreier Stahl. When process questions arise, technical data and grade characteristics can be reviewed to match feed and speed settings to specific machines and workpiece geometries. Contact Metav Werkzeuge for specialist advice on applying Walter Tools Tiger·tec Gold inserts in rostfreier Stahl—reach out at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and ordering support Technical data Article number: TS11-IL1.5ISO-WMP32G-WALTER Designation: TS11-IL1.5ISO WMP32G SKU: TS11-IL1.5ISO-WMP32G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IL1.5ISO Manufacturer: Walter Tools Material group (ISO): M (rostfreie Stähle) UID: TS11-IL1.5ISO-WMP32G-WALTER Facts Applicable material group: M Coating technology: Tiger·tec Gold Suitable for: rostfreie Stähle Special features Coated carbide grade WMP32G Designed for medium to robust cutting conditions Optimised chip control with IL1.5ISO chipbreaker Intended for integration in standard turning toolholders FAQ What materials is this insert designed for? The TS11-IL1.5ISO WMP32G insert is designed primarily for machining rostfreier Stahl; the WMP32G grade and Tiger·tec Gold coating support secure chip formation and reduced edge adhesion in such alloys. How does the IL1.5ISO chipbreaker improve machining? The IL1.5ISO chipbreaker delivers predictable chip formation and better swarf evacuation when turning rostfreier Stahl, which enhances process security and reduces the need for manual chip control. Can this insert be used for light finishing passes? Yes, the coated carbide construction and edge stability provided by the Tiger·tec Gold technology permit both productive roughing and controlled finishing operations, depending on cutting data and holder setup. Is the WMP32G grade suitable for high-speed cuts? WMP32G is formulated for rostfreie Stähle and supports higher thermal loads than uncoated grades; cutting parameters should be selected according to machine capability and workpiece geometry to exploit higher speeds safely. Which toolholders are compatible with this designation? The TS11-IL1.5ISO form is compatible with standard indexable turning toolholders designed for this insert geometry; verify holder seating dimensions against the insert designation before assembly. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no affiliation between Metav Werkzeuge and the named manufacturers beyond the sale of original factory-new products.
TS11-IL14W WMP32G IL14W Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the WMP32G grade results in secure chip formation and extended edge life when machining stainless steel; this leads to fewer tool changes and more stable production. Order inserts via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS11-IL14W WMP32G — indexable turning insert, Tiger‑tec Gold (Walter Tools) The TS11-IL14W WMP32G is an indexable turning insert developed for reliable machining of stainless steel in medium to robust operating conditions, featuring the IL14W chipbreaker and Tiger‑tec Gold coated carbide for process-stable turning. Tiger‑tec Gold coating for stable edge life Optimised for stainless steel (ISO group M) IL14W chipbreaker for secure chip control Coated carbide grade WMP32G for robust use Deliver consistent results on stainless steel components The combination of the WMP32G grade and the Tiger‑tec Gold coating is engineered to address the common challenges of machining stainless steel: material toughness, tendency to build up on the cutting edge and elevated thermal loads. The coated carbide formulation supports a balanced hardness and toughness profile, which helps to maintain a stable cutting edge under varying depths of cut and feed rates. As a result, production runs benefit from predictable tool life and fewer unscheduled interruptions, which improves overall process reliability. Secure chip control that reduces downtime The IL14W chipbreaker geometry is designed to produce short, controllable chips when cutting ductile and work-harden‑prone stainless steels. Controlled chip formation reduces the risk of entanglement and damage to the workpiece or toolholder, and it simplifies chip evacuation from the cutting zone. In practice, stable chips mean fewer manual interventions and reduced cycle-time variability, supporting higher throughput on lathes and turning centres while maintaining surface integrity on the finished part. Process safety and surface quality through coating technology The Tiger‑tec Gold technology used on this grade provides enhanced thermal resistance and adhesive wear protection compared with uncoated carbides. For applications where surface finish and repeatability are important, the coating helps to reduce flank and crater wear, resulting in more consistent part-to-part quality. The insert’s performance characteristics favour steady machining parameters rather than aggressive oscillation, which benefits shops aiming for reproducible tolerances and reduced scrap rates. Practical application guidance for production use Specifically intended for ISO material group M, this insert suits a range of turning tasks on stainless steel under medium to robust cutting conditions. The insert is intended for use in compatible indexable turning toolholders; matching the correct insert geometry and clamping system is essential for achieving the advertised benefits. When replacing grades or switching from uncoated to coated carbide, maintain a focus on stable feeds and tool overhang to exploit the coating and chipbreaker advantages fully. Contact Metav Werkzeuge for application advice and to secure Walter Tools turning inserts with Tiger‑tec Gold performance — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: TS11-IL14W-WMP32G-WALTER Article name: Indexable turning insert TS11-IL14W WMP32G (Walter Tools) Manufacturer: Walter Tools Product type: Indexable turning insert Grade designation: WMP32G Core data Series: Tiger‑tec Gold Chipbreaker: IL14W Material group: M (suitable for stainless steel) Coating type: Tiger‑tec Gold (coated carbide) Special features Coated carbide for improved wear resistance Optimised for stainless steel machining Chip control geometry for secure chips Designed for medium to robust operating conditions FAQ Which materials is this insert suitable for? The TS11-IL14W WMP32G insert from Walter Tools is designed primarily for stainless steel (ISO group M) and performs well where material toughness and heat generation challenge tool life. What are the advantages of the Tiger‑tec Gold series? Tiger‑tec Gold provides improved thermal stability and enhanced wear resistance on the WMP32G grade, supporting more consistent edge life and surface quality during prolonged turning operations. How does the IL14W chipbreaker influence machining? The IL14W geometry produces short, controllable chips on ductile stainless steels, improving chip evacuation and reducing the risk of entanglement or surface damage. Is the WMP32G grade suitable for robust cutting parameters? Yes, WMP32G is formulated for medium to robust cutting conditions on stainless steel and is aimed at maintaining a reliable cutting edge under demanding loads. Can this insert be used in all turning toolholders? The insert is compatible with standard indexable turning toolholders designed for this insert style; correct clamping and seat condition are critical to achieve the stated benefits. Die Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Trademarks and brand names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand‑new merchandise of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS11-IL18UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G carbide grade for reliable chip formation and extended edge life; the insert is especially suited to machining stainless steel under moderate to robust conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data and application support. TS11-IL18UN WMP32G turning insert — Tiger·tec Gold, IL18UN chipbreaker by Walter Tools The TS11‑IL18UN WMP32G is a coated indexable turning insert developed for dependable performance in the machining of stainless steel, combining a wear‑resistant grade with a chipbreaker optimised for secure chip control. Tiger‑tec Gold coating for stable cutting edges Designed for stainless steel machining (ISO M) IL18UN chipbreaker for reliable chip control Coated carbide grade WMP32G for long tool life Stable cutting edges for consistent productivity The coated carbide grade WMP32G, part of the Tiger·tec Gold series, is formulated to resist abrasive and adhesive wear, delivering edge stability across extended tool life. In applications with stainless steel, which typically exhibits work‑hardening and high thermal loads, a coating that supports consistent wear behaviour helps to reduce unplanned tool changes and machining interruptions. The result is more predictable cycle times and improved overall productivity without compromising component quality. Reliable chip control that protects the process The IL18UN chipbreaker is designed to produce controlled chip forms under medium to robust cutting conditions, improving evacuation and reducing entanglement risks. Reliable chip control lowers the likelihood of surface damage and accelerates handling in automated or manual turning operations. By combining geometry and grade, this insert supports steady material removal while helping maintain a consistent surface finish on the workpiece. Application guidance for efficient integration This insert is intended primarily for turning operations on stainless steel according to ISO group M. The combination of coated carbide and a dedicated chipbreaker makes the component suitable for a range of turning tasks where process security and repeatable results are priorities. For precise cutting parameters, toolholder compatibility and recommended feeds and speeds, Metav Werkzeuge provides application support and cutting data tailored to the machining setup, ensuring safe and economical deployment of the insert. For cutting data, stock removal strategies or to place an order for the Tiger·tec Gold WMP32G insert, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for specialist advice and rapid processing. Technical data Article number: TS11-IL18UN-WMP32G-WALTER Designation: TS11-IL18UN WMP32G Product type: Turning insert (indexable) Facts Grade/series: Tiger·tec Gold / WMP32G Chipbreaker: IL18UN Material group applicability: ISO M (stainless steel) Special features Coating: Tiger·tec Gold Material: Coated carbide Application focus: stainless steel machining FAQ What materials is this insert suitable for? The TS11‑IL18UN WMP32G insert is specified for stainless steel (ISO group M) and is engineered to handle the typical demands of these materials. What is the benefit of the WMP32G grade? WMP32G, part of the Tiger·tec Gold family, offers improved wear resistance and stable cutting edges, which together support longer tool life and consistent machining performance. How does the IL18UN chipbreaker improve the process? The IL18UN geometry promotes reliable chip breaking and evacuation, reducing the risk of chip-related surface damage and improving process security during turning operations. Can this insert be used for both roughing and finishing? The insert is suitable for a range of turning tasks on stainless steel under moderate to robust conditions; specific roughing or finishing suitability depends on the chosen cutting data and toolholder setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, brand‑new goods from the manufacturer. Walter Tools is used where applicable.
TS11-IL19W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and the IL19W chipbreaker for reliable and consistent stainless steel turning; order the insert directly via Metav Werkzeuge or consult our tooling specialists for application support. TS11-IL19W TS11-IL19W WMP32G — Walter Tools turning indexable insert for stainless steel (IL19W chipbreaker) A TS11-IL19W WMP32G turning insert engineered for secure chip formation and durable performance when machining stainless steel under medium to robust cutting conditions Tiger·tec Gold coated carbide grade WMP32G Optimised IL19W chipbreaker for stainless steel Stable cutting edge under robust conditions Consistent chip control and surface quality Optimised performance for stainless steel machining The combination of the WMP32G grade with the Tiger·tec Gold technology provides targeted wear resistance and thermal stability for machining stainless steel. Designed for ISO group M applications, this insert supports stable chip formation where materials tend to be tough and generate higher temperatures. The coated carbide composition reduces the tendency for built-up edge and protects the cutting edge, which in turn improves process reliability and reduces scrap rates. For production environments that require repeatable results, this setup contributes to predictable tool life and consistent component quality. Reliable chip control and edge stability in demanding conditions The IL19W chipbreaker geometry is configured to manage the typical chip behaviour of stainless steels, promoting short, controllable chips and minimising entanglement at the tool face. With a focus on chip control and a stable cutting edge, the insert reduces interruptions caused by poor chip evacuation and helps maintain surface finish under heavier engagement. The geometry also assists in dissipating heat away from the cutting zone, which lowers thermal loads on the tool and supports longer operational periods between indexings. Productivity gains and economical application Using a coated carbide grade from the Tiger·tec Gold family translates into lower tooling costs per component thanks to improved wear resistance and repeatable edge integrity. The material and coating combination is selected for productive metal removal in medium to robust conditions, allowing fewer tool changes and reduced machine downtime. These economic benefits are particularly relevant for batch production and contract manufacturing where stable throughput and predictable maintenance cycles directly affect overall efficiency. Practical notes for setup and application This indexable turning insert is intended for conventional turning operations on stainless steel and is compatible with toolholders designed for the TS11 series geometry. When selecting cutting data, consider the material’s tendency for work hardening and prefer moderate feeds with appropriate coolant strategy to support chip breaking and temperature control. For specific mounting recommendations and cutting-parameter ranges tailored to the workpiece grade and machine capabilities, consult the technical advisors at Metav Werkzeuge to ensure optimal results. Contact Metav Werkzeuge for tailored tooling advice and to secure the TS11-IL19W WMP32G insert for stainless steel machining: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TS11-IL19W-WMP32G-WALTER Product type: Turning indexable insert Designation: TS11-IL19W WMP32G Brand: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IL19W Material group: M (stainless steel application) Special features Coated carbide cutting grade Optimised for stainless steel (ISO M) Suitable for medium to robust cutting conditions Promotes stable chip formation and surface quality FAQ What materials is this insert suitable for? The TS11-IL19W WMP32G insert is optimised for stainless steel (ISO group M) and supports machining under medium to robust conditions with improved chip control. How does the Tiger·tec Gold technology benefit machining? Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and thermal stability, which contributes to longer tool life and consistent cutting-edge performance in stainless steel turning. Is the IL19W chipbreaker suitable for heavy cuts? The IL19W geometry is designed to provide controlled chips and maintain edge stability under heavier engagements typical of robust turning operations on stainless steel. Can this insert be used without coolant? While the insert’s coating and grade improve thermal resistance, coolant strategy should be chosen based on the specific stainless steel grade and cutting parameters; consult Metav Werkzeuge for tailored recommendations. Where to get application support and order information? Application support and ordering details are available from Metav Werkzeuge; their specialists can advise on cutting data and compatible toolholders for the TS11-IL19W WMP32G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new merchandise from the manufacturer. Walter Tools is used here for descriptive purposes only.
TS11-IL2.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold technology combined with the WMP32G grade and an IL2.0ISO chipbreaker ensures secure chip formation and consistent edge life in stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our advisors for tailored cutting data and clamping recommendations. TS11-IL2.0ISO WMP32G indexable turning insert — Tiger·tec Gold, stainless-steel application — Walter Tools TS11-IL2.0ISO WMP32G is an indexable turning insert designed for reliable machining of stainless steels in medium to robust cutting conditions Tiger·tec Gold coating for long tool life WMP32G grade optimised for stainless steel IL2.0ISO chipbreaker for secure chip control Coated cemented carbide construction Reliable performance for stainless-steel turning The combination of Tiger·tec Gold coating and the WMP32G cemented carbide grade provides a balance of hardness and toughness that supports stable chip formation when machining stainless steel. The IL2.0ISO chipbreaker is engineered to manage the characteristic stringy, ductile chips of rostfrei materials, reducing the risk of built-up edge and improving process consistency. This results in fewer interruptions for chip clearing and a more predictable cycle time in series production or demanding single-part runs. Longer edge life that boosts productivity A coated cemented carbide substrate with optimised surface treatment extends tool life under elevated temperatures typical for stainless-steel cutting. The insert’s wear resistance promotes a consistent cutting edge, which supports repeatable surface finishes and reduces frequency of index changes. By maintaining dimensional stability over longer tool life, the grade helps to lower tooling consumption and contributes to a more economical turning process without sacrificing component quality. Practical guidance for tooling and machining parameters The TS11-IL2.0ISO WMP32G insert suits turning operations where moderate to robust feeds and depths are required. The chipbreaker geometry is compatible with toolholders that accept TS11-style inserts and is intended to handle the heat and adhesion tendencies of rostfrei material. For best results, pair with rigid tooling setups, suitable coolant strategies and conservative feed increases when transitioning from free-cutting steels. The insert’s design eases setup and reduces process tuning during tool changes. Reliable sourcing and machining support As part of Walter Tools’ portfolio, the grade benefits from established process knowledge and consistent manufacturing standards, supporting predictable performance across batches. Metav Werkzeuge can provide cutting data recommendations and compatibility checks for holders and machine setups to integrate the insert efficiently into existing operations. The focus remains on maximising uptime and securing consistent, high-quality results in stainless-steel turning. Contact Metav Werkzeuge for personalised machining recommendations and to secure Walter Tools Tiger·tec Gold inserts for robust stainless-steel turning Technical data SKU: TS11-IL2.0ISO-WMP32G-WALTER Designation: TS11-IL2.0ISO WMP32G Product type: Indexable turning insert Material group: M (stainless steels) Core specifications ISO chipbreaker: IL2.0ISO Grade: WMP32G Series: Tiger-tec Gold Coating: Tiger·tec Gold Materials & special features Coated cemented carbide Suitable for stainless steel machining Optimised for medium to robust cutting conditions Manufacturer: Walter Tools FAQ Which materials is this insert best suited for? The TS11-IL2.0ISO WMP32G insert is optimised for machining stainless steel (ISO group M) and performs well under the typical heat and adhesion challenges of these alloys. What does the WMP32G grade offer compared with standard grades? WMP32G is a Walter Tools carbide grade within the Tiger·tec Gold family; it combines coating technology and substrate balance to improve wear resistance and stable chip formation in rostfrei applications. How does the IL2.0ISO chipbreaker affect machining? The IL2.0ISO geometry promotes predictable chip control for ductile materials, reducing built-up edge and making chip evacuation more reliable during medium to robust turning operations. Is the insert compatible with standard TS11 toolholders? The designation TS11 indicates the insert family and it is compatible with toolholders designed for TS11-style indexable inserts; check holder specifications for seat and clamp compatibility. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is a recognised manufacturer of precision metalcutting tools. Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are used for explanation purposes only. The offered item is an original, factory-new product from the manufacturer.
TS11-IL2.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G carbide grade and a dedicated IL2.5ISO chipbreaker to enable consistent machining of rostfreier Stahl with secure chip control and stable cutting edges; order directly via Metav Werkzeuge or consult the team for process advice. TS11-IL2.5ISO WMP32G — Indexable turning insert with Tiger·tec Gold for rostfreier Stahl (Walter Tools) The TS11-IL2.5ISO WMP32G is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, offering optimised chip formation and prolonged edge life in demanding turning operations Tiger·tec Gold coating for high wear resistance IL2.5ISO chipbreaker for reliable chip control Optimised for rostfreier Stahl machining Stable cutting edge under interrupted cuts Deliver predictable performance on rostfreier Stahl The insert’s Tiger·tec Gold coating combined with the WMP32G carbide formulation provides a balance of toughness and wear resistance specifically tuned for machining rostfreier Stahl. This combination reduces the risk of built-up edge and thermal softening in conditions that generate high temperatures and adhesive wear. For workshops moving between semi-finish and more robust cutting parameters, this insert supports a wider process window while maintaining surface integrity. Controlled chips and secure machining cycles The IL2.5ISO chipbreaker geometry is designed to break and evacuate chips reliably under the cutting forces typical for stainless alloys. Predictable chip shaping reduces tool interference and minimises the need for manual chip handling during cycles, which improves machine uptime. The optimized chip control also contributes to consistent force direction, lowering the likelihood of chatter and helping to protect the machine–tool–workpiece system during longer series runs. Edge stability and repeatable tool life The WMP32G grade focuses on stable edge behaviour under moderate to demanding conditions. Its coated carbide structure delivers resistance to abrasive and adhesive wear while retaining enough toughness to withstand intermittent impacts and slight variations in cutting conditions. This leads to repeatable tool life and reduced frequency of index changes, supporting more efficient scheduling and less unexpected downtime. Practical benefits for the shop floor Adopting this grade and geometry yields tangible process benefits: reduced rework due to poor surface finish, fewer interruptions from chip-related issues and a more forgiving behaviour when parameters shift. For production environments that require both throughput and reliability, the insert helps maintain consistent part quality with lower process intervention. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to discuss optimal parameter settings for rostfreier Stahl applications Technical Data Article number: TS11-IL2.5ISO-WMP32G-WALTER Product name: TS11-IL2.5ISO WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Coating/Technology: Tiger·tec Gold Chipbreaker: IL2.5ISO Material designation: M (rostfreie Stähle) Special features Coated carbide for balanced toughness and wear resistance Designed for medium to robust cutting conditions Optimised chip control for stainless applications Stable edge formation for repeatable tool life FAQ What materials is this insert intended for? This insert is intended primarily for machining rostfreier Stahl; the WMP32G grade and Tiger·tec Gold technology are tuned for those material characteristics. How does the IL2.5ISO chipbreaker affect machining? The IL2.5ISO chipbreaker promotes reliable chip formation and evacuation, which reduces chip entanglement and helps maintain steady cutting forces during turning. Is this insert suitable for interrupted cuts? Yes, the combination of WMP32G and the Tiger·tec Gold coating offers sufficient edge stability to cope with many interrupted-cut scenarios typical in turning operations. Can the insert be used across a range of feed and speed settings? The grade and coating provide a wider process window for rostfreier Stahl, enabling flexibility between finishing and more productive cutting conditions while maintaining tool life. What is the exact product designation for ordering? Order using the SKU TS11-IL2.5ISO-WMP32G-WALTER and refer to the indexable turning insert description for compatibility with toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product from Walter Tools.
TS11-IL20UN WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WMP32G carbide grade to secure longer tool life and stable chip formation when machining rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS11-IL20UN WMP32G indexable turning insert for rostfreier Stahl, Tiger‑tec Gold – Walter Tools The TS11-IL20UN WMP32G is an indexable turning insert designed for dependable performance when machining rostfreier Stahl under medium to robust cutting conditions Tiger‑tec Gold coating for extended tool life WMP32G coated carbide grade for rostfreie Stähle IL20UN chipbreaker for stable chip formation Suitable for medium to heavy cutting conditions Consistent production through advanced coating technology The Tiger‑tec Gold coating and the WMP32G grade combine to deliver wear resistance and temperature tolerance that directly benefit machining cycles. Coated carbide with this specification reduces flank wear and supports a stable cutting edge, which maintains dimensional accuracy over longer runs. For process planners, this means fewer insert changes and reduced downtime, contributing to a more predictable production flow and improved overall equipment effectiveness. Reliable chip control for safer, faster turning The IL20UN chipbreaker is designed to manage the specific chip formation characteristics of rostfreier Stahl, a material prone to stringing and work hardening. By promoting short, segmented chips and avoiding built-up edge, the insert helps to prevent tool damage and part surface defects. This controlled chip flow also improves machine safety and reduces the time spent on chip disposal, giving practical efficiency gains on the shop floor. Engineering performance for demanding stainless applications The insert’s geometry and coated substrate enable secure cutting under tougher conditions typical of rostfreie Stähle: higher cutting temperatures, tougher material behaviour and the risk of adhesion. The tool grade supports stable wear behaviour and reproducible results when turning bars and components where surface quality and repeatability are priorities. The combination of geometry and coating means fewer process iterations to achieve target tolerances. Application clarity and machining advantages Selected for its suitability with rostfreier Stähle, the insert provides a clear advantage where secure chip formation and edge stability matter most. The benefit to production is twofold: improved component quality through consistent edge life, and lower operating costs due to extended tool intervals. For engineers specifying tooling, the insert delivers a straightforward solution for medium to heavy cuts on corrosion‑resistant alloys. Contact Metav Werkzeuge for sample recommendations or tailored cutting data based on the TS11-IL20UN WMP32G and the intended rostfreier Stahl grade Technical Data Article number: TS11-IL20UN-WMP32G-WALTER Designation: TS11-IL20UN WMP32G Series: Tiger‑tec Gold Grade: WMP32G Key specifications Material group: M (rostfreie Stähle) Chipbreaker: IL20UN Insert type: TS11-IL20UN SKU: TS11-IL20UN-WMP32G-WALTER Features Coating: Tiger‑tec Gold Substrate: coated carbide Application: machining rostfreier Stahl Manufacturer: Walter Tools FAQ What materials is this insert designed for? The TS11-IL20UN WMP32G is optimised for working with rostfreier Stahl and is specified for medium to robust cutting conditions on such alloys. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WMP32G grade increases wear resistance and temperature tolerance, which helps the insert maintain a stable cutting edge and longer service life. What role does the IL20UN chipbreaker serve? The IL20UN chipbreaker promotes controlled chip formation for rostfreier Stahl, reducing the risk of stringing and built‑up edge and improving surface finish consistency. Is this insert suitable for heavy roughing operations? Yes; the combination of geometry and the WMP32G grade supports medium to heavy cutting conditions where robust performance and predictable tool life are required. Hersteller: Walter Tools; Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com