TS11-IL24UN WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and optimised chip control for reliable stainless-steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TS11-IL24UN WMP32G Turning indexable insert — Tiger·tec Gold, for stainless-steel machining — Walter Tools A TS11-IL24UN WMP32G turning indexable insert engineered for secure chip formation and consistent edge life when machining stainless steel in medium to robust cutting conditions. Tiger·tec Gold coating for enhanced wear resistance Coated cemented carbide grade WMP32G Optimised for stainless steel (M) machining Stable chip formation and reliable edge retention Reliable cutting performance for stainless-steel turning The combination of the WMP32G grade and Tiger·tec Gold coating delivers a cutting solution tailored to the demands of stainless steel machining. The coated cemented carbide substrate is designed to withstand the high temperatures and adhesive tendencies associated with these materials, ensuring wear resistance and longer effective tool life. In practice, this means fewer unscheduled tool changes and more predictable cycle times on turning operations. The grade supports stable edge behaviour under medium to robust cutting parameters, providing a solid basis for process planning in production environments. Predictable chip control and surface quality The IL24UN chipbreaker geometry is optimised for creating short, controllable chips in demanding stainless-steel cuts, reducing the risk of built-up edge and workpiece damage. Improved chip control lowers the likelihood of secondary operations caused by chip entanglement and contributes to repeatable surface finishes. For workshops aiming to increase throughput, this insert provides a balance between secure material removal and consistent part quality, helping to reduce rework and improve overall line efficiency. Practical benefits for machining and tool management Application of this insert supports a productive turning strategy: stable edge life leads to fewer insert changes and more consistent batch output, while the coated technology assists in managing thermal loads typical of stainless-steel cutting. The combination of coated cemented carbide and dedicated chip geometry simplifies tooling decisions for parts with moderate to higher cutting forces, enabling machine shops to standardise inserts across similar operations. Technical documentation and grade guidance are available to support process parameter selection and maximise the insert’s potential. Contact Metav Werkzeuge to discuss Walter Tools TS11-IL24UN WMP32G for your stainless-steel turning tasks or to request application recommendations; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: TS11-IL24UN-WMP32G-WALTER Product: Turning indexable insert Type/designation: TS11-IL24UN WMP32G Manufacturer: Walter Tools Facts Grade: WMP32G Coating family: Tiger·tec Gold Chipbreaker: IL24UN Material group suitability: M (stainless steel) Special features Coated cemented carbide Optimised for stable chip formation Designed for medium to robust stainless-steel cutting Supports secure edge retention and reduced build-up FAQ What materials is this insert suitable for? The TS11-IL24UN WMP32G is specified for the M material group and is particularly suitable for machining stainless steel. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold increases wear resistance and thermal stability on the TS11-IL24UN WMP32G, supporting longer edge life under demanding stainless-steel conditions. Which chipbreaker is fitted and what is its advantage? The IL24UN chipbreaker on this insert provides controlled, short chips that reduce entanglement and help maintain consistent surface quality when turning stainless steel. Is the insert suitable for heavy cutting conditions? The WMP32G grade is designed for medium to robust cutting conditions and offers reliable performance under higher thermal and mechanical loads typical of stainless-steel operations. Can this insert reduce downtime in a production cell? By offering stable edge life and optimised chip control, the TS11-IL24UN WMP32G contributes to fewer tool changes and more predictable cycle times, which helps to lower unplanned downtime. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original factory-new product from the manufacturer (Walter Tools).
TS11-IR-A55 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold grade's wear resistance and the IR-A55 chipbreaker for stable chip control in stainless-steel turning. The combination of a robust coated carbide grade and predictable cutting behaviour reduces downtime and supports consistent batch quality. Order this insert directly via Metav Werkzeuge or request further advice from the consultancy team. TS11-IR-A55 WMP32G — Turning indexable insert for stainless-steel machining | Walter Tools The TS11-IR-A55 WMP32G is a turning indexable insert engineered for reliable chip control and extended tool life in demanding stainless-steel applications. Tiger·tec Gold coating for extended tool life IR-A55 chipbreaker for controlled chip flow Specifically for stainless-steel machining Coated carbide grade WMP32G for robustness Increased productivity through enhanced wear resistance The Tiger·tec Gold coating combined with the WMP32G grade brings a marked improvement in tool life and wear performance when machining tough, heat-prone materials. Coated carbide technology reduces flank wear under medium to robust cutting conditions, which translates directly into fewer tool changes and longer uninterrupted runs on the shopfloor. This effect increases overall throughput and lowers unit machining costs while maintaining repeatable process parameters for serial production. Predictable chip formation and improved surface quality The IR-A55 chipbreaker is designed to control chip flow during turning of stainless steel, a material group prone to built-up edge and thermal challenges. Stable chip formation prevents entanglement and reduces the risk of workpiece damage, contributing to a consistent surface finish and reduced secondary operations. In practice, this geometry supports secure evacuation of chips and helps to maintain a stable cutting edge, which benefits process security and reduces scrap rates in precision turning tasks. Shopfloor compatibility and process reliability As part of the Tiger·tec Gold series, this insert offers robust performance under a range of cutting regimes common in industrial turning. The TS11-IR-A55 designation follows standard indexable insert conventions for straightforward identification and tool management. Integration into existing turning systems is simplified by the conventional insert geometry, enabling predictable tool life and consistent results across batches. The combination of coated carbide, a defined chipbreaker and a grade tuned for stainless-steel applications supports reproducible machining and efficient production planning. Contact Metav Werkzeuge today to discuss Walter Tools' TS11-IR-A55 WMP32G Tiger·tec Gold turning insert and secure tailored recommendations for stainless-steel machining on the production line. Technical Data SKU: TS11-IR-A55-WMP32G-WALTER Article designation: TS11-IR-A55 WMP32G Product type: Turning indexable insert Manufacturer: Walter Tools Core Data Material group: M (rostfreie Stähle) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR-A55 Special features Coated carbide cutting grade Designed for stainless-steel machining Stable chip control for improved surface quality Part of Tiger·tec Gold product family FAQ What material is this insert intended for? The TS11-IR-A55 WMP32G is specified for machining stainless steel and is optimised for the challenges associated with that material group. How does the IR-A55 chipbreaker benefit turning operations? The IR-A55 chipbreaker promotes controlled chip formation, reducing entanglement and supporting a consistent surface finish during turning with the WMP32G grade. What performance advantages does Tiger·tec Gold provide? The Tiger·tec Gold coating enhances wear resistance and tool life, delivering more consistent cutting behaviour and fewer tool changes in serial production. Is this insert suitable for robust cutting conditions? Yes; the WMP32G grade and insert design are intended for medium to robust conditions common in stainless-steel machining, providing stable cutting edges and predictable results. Which manufacturer produces this insert? This insert is supplied by Walter Tools and is part of the Tiger·tec Gold family, offered under the designation TS11-IR-A55 WMP32G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
TS11-IR-A60 WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP22G grade for secure chip control and extended tool life when machining stainless steels; order or consult Metav Werkzeuge for application support and reliable delivery. TS11-IR-A60 WMP22G indexable turning insert – Walter Tools (Tiger·tec Gold, for stainless steels) The TS11-IR-A60 WMP22G indexable turning insert is designed for productive machining of stainless steels under medium to robust conditions, combining a Tiger·tec Gold coating with the IR-A60 chipformer for stable cutting and reliable chip control. Tiger·tec Gold coating for enhanced wear resistance Grade WMP22G optimised for stainless steel machining IR-A60 chipformer for secure and consistent chips Consistent edge stability in medium to robust conditions Longer tool life and reliable cutting in demanding stainless work The Tiger·tec Gold coating and the WMP22G carbide grade work together to reduce flank and crater wear, which translates into more predictable tool life and fewer unplanned tool changes. Designed specifically for ISO material group M (stainless steels), the grade supports secure chip formation where heat and material adhesion can otherwise cause built-up edge. The coating’s multilayer design improves thermal stability at the cutting edge, enabling consistent surface quality and stable performance across a variety of stainless alloys. Predictable productivity through chip control and edge stability The integrated IR-A60 chipformer provides controlled chip breaking under medium to robust cutting parameters, reducing the risk of long, stringy chips and improving process reliability in automated and manual turning operations. Stable chip flow reduces secondary operations and machine downtime, which is particularly relevant in production setups aiming for tighter cycle times. Combined with the insert’s robust edge geometry, the solution supports repeatable part quality and a measurable improvement in processing efficiency. Practical selection and application guidance for shop floors The insert is intended for turning applications on stainless steels where a balance of wear resistance and toughness is required. The IR-A60 geometry is suitable for a range of depths of cut and feeds; it performs well where secure chip control is essential for safety and surface integrity. For machining strategies, pair the insert with appropriate coolant use and verified cutting data for the specific stainless grade. For complex workpieces or unfamiliar alloys, consultation with Metav Werkzeuge ensures the chosen geometry and cutting parameters match the production goals while maintaining tool life and component quality. For tailored machining advice and ordering of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for application support and delivery: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: TS11-IR-A60-WMP22G-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Designation: TS11-IR-A60 WMP22G Brand: Walter Tools Series: Tiger·tec Gold Facts Material group: M (ISO – stainless steels) Grade: WMP22G Chipformer: IR-A60 SKU: TS11-IR-A60-WMP22G-WALTER Special features Coating: Tiger·tec Gold (coated carbide) Application: Machining of rostfreiem Stahl (stainless steels) Behaviour: Stable chip formation and reliable cutting edge Intended use: Medium to robust machining conditions of stainless steels FAQ What materials is this insert suitable for? The TS11-IR-A60 WMP22G insert is designed primarily for ISO group M materials, i.e. stainless steels, offering secure chip control and wear resistance in those alloys. What does the IR-A60 chipformer provide in practice? The IR-A60 chipformer ensures controlled chip breaking and safer evacuation under medium to robust cutting parameters, helping to reduce rework and machine stoppages when using the TS11-IR-A60 WMP22G. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating improves thermal stability and wear resistance at the cutting edge, which leads to more predictable tool life and consistent surface finish when machining stainless steels with this Walter Tools grade. Is this insert suitable for automated turning centres? Yes; the combination of the WMP22G grade and IR-A60 chipformer is well suited to automated turning where secure chip control and repeatable edge life are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and comparison; there is no association between our company and the mentioned brands. The offered article is an original, factory-new product of the stated manufacturer.
TS11-IR-A60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the WMP32G grade and the IR‑A60 chipbreaker for efficient, reliable stainless steel turning; order via Metav Werkzeuge or consult the team for technical guidance. TS11-IR-A60 WMP32G turning insert — Walter Tools, Tiger·tec Gold, IR‑A60 chipbreaker TS11-IR-A60 WMP32G is a turning insert tailored for the machining of stainless steels, combining a coated carbide grade with a dedicated chip control geometry. Tiger·tec Gold coated grade WMP32G IR-A60 chipbreaker for stable chips Optimised for stainless steel machining Reliable edge stability by Walter Tools Increased process reliability through coating and grade The combination of the Tiger·tec Gold technology and the WMP32G grade provides a balance of wear resistance and toughness that reduces flank wear and maintains a consistent cutting edge in demanding applications. Coated carbide, as used here, improves thermal stability and lowers the risk of built-up edge when machining stainless steel, which is prone to work hardening and adhesion. This results in fewer interrupts for tool change and a steadier production output. Better chip control and surface quality The IR‑A60 chipbreaker is engineered for controlled chip segmentation when turning tough and ductile alloys. Controlled chip formation reduces the chance of long, tangled swarf and supports reliable evacuation from the cutting zone, contributing to improved surface finishes and reduced secondary operations. For production environments that require repeatable part quality, the chip geometry assists in achieving consistent results with minimal rework. Practical benefits for workshop efficiency Using a coated turning insert with optimised geometry shortens cycle times and increases tool life, translating into lower unit costs and higher throughput. The tool’s design supports stable cutting under moderate to robust conditions typical of stainless-steel components, making it suitable for jobbing shops and serial production alike. By simplifying tool selection—grade and geometry matched for stainless steel—setup times and process tuning are reduced. Material application and suitability This insert is classified for material group M, explicitly intended for stainless steels that generate high temperatures and demand secure chip control. The combination of substrate and coating assists in resisting adhesion and abrasive wear, while the specific chipbreaker supports consistent chip evacuation and component integrity. For engineers specifying turning tools for corrosion-resistant alloys, this option provides a focused solution without needless complexity. For demanding stainless-steel turning applications, specify the Walter Tools TS11-IR-A60 WMP32G with Tiger·tec Gold for improved edge life and chip control — contact Metav Werkzeuge for detailed cutting data and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS11-IR-A60-WMP32G-WALTER Product type: Turning insert Brand: Walter Tools Facts Grade: WMP32G Material group: M (stainless steel) Series: Tiger·tec Gold Special features Chipbreaker: IR‑A60 Coating: Tiger·tec Gold (coated carbide) Application: machining stainless steel FAQ What materials is this insert designed for? The TS11-IR-A60 WMP32G is specified for material group M and is intended primarily for applications in stainless steel machining. How does the Tiger·tec Gold treatment benefit performance? The Tiger·tec Gold coating on the WMP32G grade enhances thermal stability and wear resistance, extending tool life during continuous turning operations. Is the IR‑A60 chipbreaker suitable for interrupted cuts? Yes, the IR‑A60 chipbreaker provides stable chip formation under moderate to robust cutting conditions and performs reliably in many interrupted-turning scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tooling for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands; the offered item is original, factory-new merchandise of the manufacturer.
TS11-IR-A60-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for secure chip control and extended edge life in demanding stainless steel turning, ensuring steady throughput and fewer tool changes. For supply or application advice, consult Metav Werkzeuge's specialists. TS11-IR-A60-F5 WMP32G indexable turning insert – Tiger·tec Gold for stainless steel (Walter Tools) A TS11-IR-A60-F5 WMP32G indexable turning insert designed for reliable performance in the machining of stainless steel, optimised for medium to robust cutting conditions Tiger·tec Gold coating for durable performance Grade WMP32G suited to stainless steel Chipbreaker IR-A60-F5 for stable chip formation Designed for medium to robust cutting conditions High productivity when machining stainless steel The Tiger·tec Gold grade WMP32G is engineered specifically for the challenges of machining stainless steel. The combination of a coated carbide substrate and the IR-A60-F5 chipbreaker promotes stable chip formation under higher heat and plasticity conditions, reducing built-up edge and unexpected interruptions. This results in more predictable cycle times and fewer insert changes, which supports continuous production and lowers indirect costs associated with downtime. Consistent edge life and surface quality Coating and substrate technology deliver edge stability that translates into repeatable part quality. The Tiger·tec Gold technology supports robust cutting with a resistance to abrasive wear and thermal loading, maintaining a sharp cutting geometry for longer. For operations where repeatability matters, such as batch turning of components from stainless steel, this insert preserves surface finish and dimensional accuracy, helping to meet tolerance requirements without frequent tool adjustments. Integration into productive turning workflows The TS11-IR-A60-F5 family with WMP32G offers easy integration into standard toolholders for turning operations, providing a reliable solution for shops focused on throughput. The IR-A60-F5 chipbreaker aids reliable chip control across a range of cutting parameters, simplifying parameter selection and reducing trial-and-error setup. Where process stability and predictable tool life are priorities, this insert supports efficient cycle planning and reduces scrap rates. Practical benefits for modern workshops Selecting this indexable turning insert supports a pragmatic balance between tool life and machining speed. The coated carbide grade is tailored for the specific behaviours of stainless steel, such as work hardening and adhesion tendencies, thereby improving overall process security. Fewer unexpected tool changes and better chip control contribute to safer, cleaner machining conditions and allow operators to focus on process consistency rather than frequent troubleshooting. Contact Metav Werkzeuge for personalised application advice on Walter Tools Tiger·tec Gold inserts and to arrange reliable supply for production needs Technical data SKU: TS11-IR-A60-F5-WMP32G-WALTER Product: Drehwendeschneidplatte (indexable turning insert) Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR-A60-F5 Material group: M (stainless steel) Manufacturer: Walter Tools Facts Suitable material group: stainless steel (ISO M) Intended cutting conditions: medium to robust Coating technology: Tiger·tec Gold Substrate: coated carbide Special features Designed for stable chip formation Optimised for reduced built-up edge in stainless steel Promotes repeatable edge life and surface quality Suited to productive turning operations FAQ What materials is this insert intended for? The TS11-IR-A60-F5 WMP32G insert is specified for stainless steel applications (ISO group M) and is optimised to handle the tendency of these alloys to work harden and form built-up edges. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade increases resistance to thermal and abrasive wear, supporting longer edge life and more consistent surface finish during sustained turning operations. Which chipbreaker is fitted and what does it achieve? The insert features the IR-A60-F5 chipbreaker, which is designed to ensure stable chip formation under medium to robust cutting conditions, aiding process stability and chip evacuation. Can this insert be used for precision components? Yes, the grade’s enhanced edge stability and consistent wear characteristics make the insert suitable for applications where repeatable surface quality and dimensional accuracy are required. Is the insert suitable for high-speed turning? The WMP32G grade is tailored toward robust stainless steel machining; cutting parameters should be selected based on machine capability and process requirements. The technology supports reliable performance across a practical range of speeds for demanding jobs. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are used solely for explanatory purposes. There is no connection between our company and the brands mentioned. The offered item is an original, factory-new product of Walter Tools.
TS11-IR0.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WMP32G grade and the IR0.5ISO chipbreaker, this turning insert delivers stable chip formation and extended edge life when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult their application specialists for selection support. TS11-IR0.5ISO WMP32G turning indexable insert (chipbreaker IR0.5ISO) — Walter Tools, for rostfreier Stahl The TS11-IR0.5ISO WMP32G is a coated carbide turning insert from the Tiger·tec Gold series, engineered for medium to robust machining conditions on rostfreier Stahl and designed to improve process stability and surface quality. Tiger·tec Gold grade WMP32G Coated carbide for tough conditions Optimised IR0.5ISO chipbreaker Reliable performance on rostfreier Stahl Maximise productivity with consistent chip control The combination of the Tiger·tec Gold coating and the WMP32G grade targets the common challenges of machining rostfreier Stahl — high heat, material toughness and a tendency to form built-up edge. The IR0.5ISO chipbreaker helps to break and eject chips reliably, reducing interruptions and limiting heat concentration at the cutting edge. As a result, operators benefit from fewer tool changes and steadier cycle times, which supports higher overall throughput on turning operations. Improved process security and surface finish Designed for medium to robust conditions, this insert supports a stable cutting edge and predictable flank wear behaviour. The coated carbide substrate of the Tiger·tec Gold family enhances resistance to thermal and abrasive stress, which contributes to a more consistent surface finish and reduced rework. For production environments where reproducibility matters, the insert's performance characteristics translate into lower scrap rates and improved part quality. Application guidance and compatibility in the toolroom The designation targets holders compatible with the TS11 geometry and the IR0.5ISO chip control philosophy; selection should follow toolholder and machine capability. The combination of grade and chipbreaker is particularly suited for rostfreier Stahl where reliable chip formation and edge stability are priority criteria. For specific holder compatibility or process optimisation, consultation with a tooling specialist ensures correct seat, rake and clamping choices to fully exploit the insert’s properties. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts, quoting SKU TS11-IR0.5ISO-WMP32G-WALTER or request application advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TS11-IR0.5ISO-WMP32G-WALTER Product: Drehwendeschneidplatte / turning indexable insert Series: Tiger·tec Gold Grade: WMP32G Designation: TS11-IR0.5ISO WMP32G Manufacturer: Walter Tools Key figures Material group: M (rostfreier Stahl) Intended application: medium to robust machining of rostfreier Stahl Chipbreaker: IR0.5ISO UID: TS11-IR0.5ISO-WMP32G-WALTER Special features Coated carbide technology (Tiger·tec Gold) Optimised chip control for rostfreier Stahl Stable edge life under elevated thermal stress Designed for reproduciable turning performance FAQ What materials is this insert designed for? The TS11-IR0.5ISO WMP32G insert is specified for machining rostfreier Stahl (material group M) under medium to robust conditions. How does the IR0.5ISO chipbreaker help in production? The IR0.5ISO chipbreaker on the WMP32G grade promotes controlled chip formation and ejection, reducing interruptions and improving process stability when turning rostfreier Stahl. Is the insert part of a recognised coating technology? Yes, this grade belongs to the Tiger·tec Gold series; the coating increases thermal and abrasive resistance for more consistent tool life. Can the insert be used in standard TS11 toolholders? The designation TS11 indicates compatibility with holders designed for TS11 geometry; confirm holder seat and clamping specifications before use. Why select WMP32G for rostfreier Stahl over an uncoated grade? WMP32G is a coated carbide grade developed to support stable chip formation and longer edge life in rostfreier Stahl, reducing downtime and improving component finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned here for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory-new product from the respective manufacturer.
TS11-IR0.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coated carbide in the WMP32G grade and the IR0.75ISO chipbreaker for reliable chip control and extended edge life when machining stainless steel; order directly via Metav Werkzeuge or request technical guidance from our consultants. TS11-IR0.75ISO WMP32G — indexable turning insert, Tiger·tec Gold (Walter Tools) The TS11-IR0.75ISO WMP32G is a coated indexable turning insert designed for machining stainless steel under moderate to robust cutting conditions, delivering controlled chip formation and consistent edge stability. Tiger·tec Gold coated grade WMP32G Optimised chipbreaker IR0.75ISO Suited for machining stainless steel Consistent performance in demanding stainless-steel turning The combination of the WMP32G grade and the Tiger·tec Gold coating provides a balance between wear resistance and toughness that is well suited to stainless steel (ISO group M). The coated carbide substrate reduces the tendency for built-up edge and supports stable chip formation, which in turn lowers the risk of unexpected rework. For production environments where repeatability matters, this geometry and grade help maintain surface quality and process reliability over longer tool life. Proven chip control for efficient turning operations The integrated IR0.75ISO chipbreaker is engineered to produce short, controllable chips during turning operations on resilient materials. By breaking and evacuating chips reliably, the insert minimises interruption to the machining process and reduces the probability of tool damage or machine downtime. The result is improved productivity and fewer manual interventions, which supports leaner machining cycles and a more predictable machining rhythm. Process security and application focus for shop-floor use Designed as an indexable turning insert for general turning tasks in tougher stainless-steel applications, the geometry supports medium to robust cutting parameters while maintaining edge security. The WMP32G grade is a coated carbide developed to resist the thermal and mechanical stresses typical of this material group, enabling shops to plan tool change intervals and achieve consistent part quality. Its suitability for ISO group M offers a clear material match for process planning and tool selection. Contact Metav Werkzeuge for tailored technical advice and availability regarding Walter Tools' TS11-IR0.75ISO WMP32G — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: TS11-IR0.75ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS11-IR0.75ISO WMP32G Walter Tools Product type: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR0.75ISO Material group: M (stainless steels) Core data No dimensional or numerical specifications provided in the product record Special features Coating: Tiger·tec Gold Substrate: coated carbide Optimised for: stainless steel (ISO group M) Chip control: IR0.75ISO chipbreaker for short, controllable chips Typical use: moderate to robust turning conditions Manufacturer: Walter Tools FAQ Is this insert suitable for austenitic stainless steels? The TS11-IR0.75ISO WMP32G is specified for ISO group M (rostfreie Stähle), which includes austenitic stainless steels; the WMP32G grade and Tiger·tec Gold coating help manage the material’s toughness and heat sensitivity. What is the function of the IR0.75ISO chipbreaker? The IR0.75ISO chipbreaker on this insert controls chip shape and evacuation, producing short chips to reduce entanglement and improve process reliability when turning stainless-steel components. Can this insert improve surface finish on turned parts? When used with stable cutting parameters, the geometry and coated WMP32G grade contribute to consistent edge stability and surface quality on stainless-steel turning operations. Does the insert require specific coolant strategy? The TS11-IR0.75ISO WMP32G performs under typical turning coolant practices for stainless steel; coolant strategy should follow established shop rules for ISO group M materials to manage heat and chip evacuation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. The offered article is original, factory-new merchandise from the manufacturer.
TS11-IR1.0ISO WMP22G Wendeplatten - Walter Tools
Take advantage of a specialised insert that combines the Tiger·tec Gold cutting material with a purpose-designed IR1.0ISO chipbreaker to deliver reliable performance in the machining of stainless steels; the robust coated-carbide construction supports stable cutting edges and predictable tool life. Order or request application advice via Metav Werkzeuge for a smooth integration into production. TS11-IR1.0ISO WMP22G indexable turning insert, Tiger·tec Gold grade, for stainless steels — Walter Tools A TS11-IR1.0ISO WMP22G indexable insert engineered for secure chip formation and productive turning of stainless steels in medium to robust cutting conditions. Tiger·tec Gold coating for extended tool life Grade WMP22G optimised for stainless steels IR1.0ISO chipbreaker for stable chip control Coated carbide substrate for robust cutting edges Reliable performance for stainless steel turning The combination of the Tiger·tec Gold coating and the WMP22G grade provides a balanced response to the challenges of machining stainless steels, which typically generate heat and tend to form built-up edges. The coated-carbide substrate offers increased abrasion and adhesive wear resistance, meaning less frequent insert changes and more consistent surface quality. This results in dependable cycle times and a reduction in unexpected rework, which supports overall process efficiency. Stable chip control to reduce interruptions The IR1.0ISO chipbreaker is designed to shape and evacuate chips reliably under medium to robust cutting parameters. By producing short, controllable chips, the insert reduces the risk of entanglement and tool interference, improving process security and lowering the frequency of machine stoppages. For operations where consistent throughput matters, the improved chip behaviour contributes directly to a steadier production flow and fewer manual interventions. Robust cutting edge for productive machining A coated carbide construction ensures a resilient cutting edge capable of withstanding the thermal and mechanical stresses typical when machining high-alloy and corrosion-resistant steels. This durability promotes longer tool life and stable edge geometry over multiple passes, which helps maintain dimensional accuracy and surface finish across batches. The result is higher productivity with predictable maintenance intervals. Typical uses and process guidance This insert is suited to turning applications in workshops and production environments where stainless steels are a primary workpiece material and where medium to robust cutting conditions apply. It performs well in both semi-finishing and more aggressive material removal tasks when paired with appropriate toolholders and cutting parameters. For tailored cutting-data and application recommendations, Metav Werkzeuge can provide technical guidance to align cutting speeds, feeds and depths of cut with the specific machining task. For application-specific advice or availability of the Walter Tools TS11-IR1.0ISO WMP22G insert, contact Metav Werkzeuge for expert support and ordering information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number / SKU: TS11-IR1.0ISO-WMP22G-WALTER Product designation: TS11-IR1.0ISO WMP22G Brand: Walter Tools Facts Series: Tiger·tec Gold Grade: WMP22G Chipbreaker: IR1.0ISO Material group: M Special features Coated carbide cutting material Designed for machining stainless steels Stable chip formation and edge stability Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS11-IR1.0ISO WMP22G insert from Walter Tools is designed primarily for stainless steels, offering stable cutting behaviour in those material groups. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP22G grade increases wear resistance and supports consistent edge integrity, which extends tool life and maintains surface quality during machining. How does the IR1.0ISO chipbreaker affect machining? The IR1.0ISO chipbreaker produces controllable, short chips, enhancing process security and reducing interruptions caused by chip entanglement in turning operations. Is this insert suitable for roughing or finishing tasks? The WMP22G grade is intended for medium to robust conditions and can be applied effectively in both semi-finishing and more productive material removal tasks, depending on the selected cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TS11-IR1.0ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steels; the IR1.0ISO chipbreaker ensures stable chip control and consistent surface quality. Order availability and technical advice are provided by Metav Werkzeuge for seamless integration into production. Drehwendeschneidplatte TS11-IR1.0ISO WMP32G – indexable insert for stainless steel machining (Walter Tools) The TS11-IR1.0ISO WMP32G is an indexable turning insert engineered for the machining of stainless steels, offering a balance of wear resistance and dependable edge stability for medium to robust cutting conditions. Tiger·tec Gold coating for enhanced wear resistance WMP32G grade for stainless steel machining IR1.0ISO chipbreaker for stable chip control Walter Tools quality and consistent tool life Increased productivity through reliable cutting performance The combination of a coated carbide substrate and the Tiger·tec Gold technology delivers measurable productivity benefits. Heat resistance is improved and flank wear is reduced, which leads to extended tool life and fewer interruptions for insert changes. For production environments this translates into lower tooling costs per component and more predictable cycle times, supporting efficient batch processing and repeatable results. Secure machining of stainless steels with improved surface finish Stainless steels tend to work-harden and form built-up edges under adverse cutting conditions; the WMP32G grade is formulated to counteract these effects. Stable shear zones are promoted and thermal stability is enhanced by the coating, resulting in cleaner chip formation and a better first-pass surface finish. This means less rework and a reduced need for downstream finishing operations, particularly in components where surface integrity is critical. Controlled chips and process stability from the chipbreaker design The IR1.0ISO chipbreaker geometry is designed to produce predictable chip shapes when machining tough, ductile materials. Controlled chip flow reduces the risk of tangling and tool damage, while consistent edge geometry maintains dimensional accuracy. In automated or lights-out setups the improved chip behaviour reduces machine stoppages, contributing directly to higher overall equipment effectiveness (OEE). Practical application notes and handling advantages The insert is suited to medium to robust turning tasks on stainless steels, where a balance of wear resistance and edge reliability is required. The coated structure tolerates intermittent cutting and varying engagement, making it suitable for series production as well as for regrinding cycles where applicable. Technical compatibility with common turning toolholders is standard for this insert type, simplifying stock management and tool-set flexibility. For application support or to confirm suitability in specific stainless steel grades, contact Metav Werkzeuge for tailored advice and availability of the TS11-IR1.0ISO WMP32G insert. Technical Data Article number: TS11-IR1.0ISO-WMP32G-WALTER Designation: TS11-IR1.0ISO WMP32G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core data Material group: M (stainless steels) Chipbreaker: IR1.0ISO Grade: WMP32G Special features Coating: Tiger·tec Gold Substrate: coated carbide Series: Tiger-tec Gold Suitable for: stainless steel machining Brand: Walter Tools FAQ What materials is this insert intended for? This insert is intended primarily for stainless steels; the WMP32G grade and Tiger·tec Gold coating support secure chip formation and heat resistance when machining M-group materials. How does the IR1.0ISO chipbreaker improve machining? The IR1.0ISO chipbreaker on the TS11-IR1.0ISO WMP32G promotes predictable chip shapes and reduced tangling, which improves process stability and reduces machine downtime. Is this a coated or uncoated insert? The WMP32G grade is a coated carbide insert utilising Tiger·tec Gold technology to enhance wear resistance and thermal stability during turning operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is original new goods from the manufacturer.
TS11-IR1.0ISO-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WMP32G grade for consistent performance on rostfreier Stahl; the geometry and chipbreaker deliver stable chip formation and predictable cutting-edge life. Order the insert via Metav Werkzeuge or contact the consultants for application support. TS11-IR1.0ISO-F5 WMP32G turning indexable insert for rostfreier Stahl — Walter Tools The TS11-IR1.0ISO-F5 WMP32G is a coated turning insert designed for medium to robust machining of rostfreier Stahl, combining a durable substrate with the Tiger·tec Gold coating for reliable cutting performance. Tiger·tec Gold coated carbide grade WMP32G Designed for rostfreier Stahl machining Stable chip formation under robust conditions Reliable cutting-edge life and repeatability High-performance grade for rostfreier Stahl applications The WMP32G grade from the Tiger·tec Gold series is a coated carbide formulation developed specifically for the challenges of machining rostfreier Stahl. The composition balances wear resistance and toughness to limit edge build-up and cracking under elevated temperatures. As a result, the insert supports sustained cutting cycles and lower interruption rates in production environments. The specification is intended to provide reproducible component quality while reducing the frequency of tool changes and unplanned downtime. Improved process stability through optimised chip control Equipped with the IR1.0ISO-F5 chipbreaker, the insert promotes stable chip formation, which minimises the risk of long, entangling chips and improves surface consistency. The chipbreaker geometry channels swarf efficiently and reduces heat concentration at the cutting zone, helping to maintain a steady cutting edge. For engineers and process planners this means fewer interruptions for chip clearing and more reliable cycle times, particularly when turning demanding rostfreie materials that tend to be tough and work-harden. Predictable durability and industrial readiness for robust conditions As part of a well-known tool family, the insert offers repeatable cutting performance and long tool life under medium to robust working conditions. The coated substrate of the Tiger·tec Gold technology enhances resistance to abrasive wear while retaining a tough edge, supporting productivity gains in serial production. The specification is suited for machining strategies where consistent surface finish and dimensional stability are priorities, enabling process optimisation and greater throughput without compromising component quality. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Gold inserts and availability, quoting SKU TS11-IR1.0ISO-F5-WMP32G-WALTER for precise support Technical data Article number: TS11-IR1.0ISO-F5-WMP32G-WALTER Name: Drehwendeschneidplatte TS11-IR1.0ISO-F5 WMP32G Walter Tools Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR1.0ISO-F5 Material class: M Suitable for: rostfreier Stahl Special features ISO designation: TS11-IR1.0ISO-F5 WMP32G Application: medium to robust conditions Coating technology: Tiger·tec Gold (coated carbide) UID: TS11-IR1.0ISO-F5-WMP32G-WALTER FAQ What materials is this insert suitable for? The insert is specified for machining rostfreier Stahl and is classified under material class M for tough, heat-prone stainless materials. What does the Tiger·tec Gold designation mean for performance? Tiger·tec Gold denotes a coated carbide technology that combines enhanced wear resistance with toughness, improving cutting-edge life and process reliability when machining rostfreie Werkstoffe. How does the IR1.0ISO-F5 chipbreaker affect machining? The IR1.0ISO-F5 chipbreaker promotes controlled swarf forming and evacuation, resulting in stable chip formation and fewer interruptions during turning operations. Is this insert appropriate for heavy-duty turning operations? The insert is designed for medium to robust conditions and offers predictable durability and repeatability suitable for demanding production environments. Which product code should be referenced when ordering or specifying? Please reference SKU TS11-IR1.0ISO-F5-WMP32G-WALTER and the ISO designation TS11-IR1.0ISO-F5 WMP32G for accurate identification. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS11-IR1.0ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for consistent performance in stainless steel applications; the insert delivers controlled chip formation and reliable edge life for steady productivity. Order directly via Metav Werkzeuge or consult the technical team for application matching. TS11-IR1.0ISO-M5 WMP32G indexable turning insert — Tiger·tec Gold coated, IR1.0ISO-M5 chipbreaker, Walter Tools TS11-IR1.0ISO-M5 WMP32G is an indexable turning insert designed for medium to robust machining conditions in stainless steel; optimised for stable cutting and secure chip control Tiger·tec Gold coated carbide grade WMP32G Optimised chip control IR1.0ISO-M5 For stainless steel (ISO M) machining Stable edge life and process security Higher throughput for stainless steel with predictable results The combination of the Tiger·tec Gold coating and the WMP32G grade produces a robust, coated carbide surface that improves wear resistance and heat management when machining stainless steel. This results in fewer unscheduled tool changes and more consistent part quality. The geometry of the insert reduces the tendency for built-up edge formation, which helps maintain dimensional accuracy over longer tool life. For operations requiring repeatable finish and reduced downtime, this insert offers measurable advantages in cycle-time reliability. Controlled chips and safer tool behaviour under heavy conditions The chipbreaker IR1.0ISO-M5 is engineered to promote short, manageable chips across a range of feeds and depths of cut typical for M-group materials. Better chip control reduces the risk of surface damage and improves machine uptime, particularly where manual chip handling is limited. The coated carbide substrate supports stable cutting edges and reduces friction at the cutting zone, which helps sustain cutting parameters and lowers the likelihood of thermal or mechanical edge failure during continuous machining. Practical application guidance for secure process integration Integration into existing toolholders and turning routines is straightforward due to the ISO-style designation and consistent form factor. The insert is suitable for facing and turning operations where medium to heavy cuts are required in stainless steel, enabling a balance between material removal rate and surface integrity. For first-off setup, conservative cutting data with progressive stepping of speed and feed yields the best combination of surface finish and tool life. Where process stability is crucial, pairing this insert with appropriate coolant strategies and verified holder rigidity will maximise the benefits of the Tiger·tec Gold coating. Efficient production through proven material compatibility Designed for the ISO M material group, the grade supports machining of a wide range of stainless steel alloys that typically generate heat and strain at the cutting edge. The insert’s construction aids secure chip formation and consistent cutting forces, which simplifies process planning and contributes to predictable tool-change intervals. For workshops aiming to raise productivity while maintaining surface quality, the insert represents a practical step towards reduced variability and improved throughput. Contact Metav Werkzeuge for application-specific data, stock availability and matching toolholder recommendations for Walter Tools Tiger·tec Gold inserts such as the TS11-IR1.0ISO-M5 WMP32G Technical Data Article number: TS11-IR1.0ISO-M5-WMP32G-WALTER Description: Drehwendeschneidplatte TS11-IR1.0ISO-M5 WMP32G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G ISO designation: TS11-IR1.0ISO-M5 WMP32G Facts Material group: M Suitable for: stainless steel (ISO M) Chipbreaker: IR1.0ISO-M5 Coating/Construction: coated carbide Special features Optimised for stable chip formation in stainless steels Coated carbide grade for improved wear resistance Designed for medium to robust machining conditions Consistent edge behaviour for process security FAQ What materials is this insert designed for? The TS11-IR1.0ISO-M5 WMP32G indexable turning insert is intended primarily for stainless steel, corresponding to the ISO M material group. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP32G grade reduces wear and improves thermal management for more consistent cutting-edge performance during continuous turning operations. What is the purpose of the IR1.0ISO-M5 chipbreaker? The IR1.0ISO-M5 chipbreaker promotes short, controllable chips and stabilises cutting forces, which aids in maintaining surface quality and reducing chip-related interruptions when using the TS11-IR1.0ISO-M5 WMP32G insert. Can this insert be used for heavy interrupted cuts? The coated carbide construction and robust grade of the insert make it suitable for medium to robust conditions; testing under specific interrupted-cut scenarios is recommended to confirm optimal parameters for the application. Is the insert compatible with standard ISO toolholders? Yes, the ISO-style designation ensures compatibility with matching ISO toolholders; correct clamping and holder rigidity are necessary to fully leverage the insert’s stability and edge life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
TS11-IR1.25ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, reliable chip control and proven cutting-edge stability for consistent performance in rostfreier Stahl turning operations. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TS11-IR1.25ISO WMP32G turning insert for rostfreier Stahl — Tiger‑tec Gold by Walter Tools TS11-IR1.25ISO WMP32G is a coated turning insert engineered for secure chip formation and long tool life in rostfreier Stahl machining Tiger‑tec Gold coated carbide WMP32G IR1.25ISO chipbreaker for stable chips Optimised for rostfreier Stahl machining Consistent cutting-edge life and productivity High process reliability and measurable productivity gains The Tiger‑tec Gold grade WMP32G is a coated carbide designed for the typical challenges of rostfreier Stahl: high ductility, tendency to build up on the edge and elevated cutting temperatures. The combination of a wear-resistant coating and a geometry matched to the IR1.25ISO chipbreaker improves chip control and reduces the frequency of secondary operations for chip clearance. This results in measurable productivity gains and fewer unplanned stops, supporting a stable production flow and lower unit cost per part. Controlled chip formation and clear technical advantages The IR1.25ISO chipbreaker geometry ensures short, controlled chips under a wide range of cutting conditions, which helps to protect toolholders and workpiece surfaces. The insert’s substrate and coating work together to maintain a stable cutting edge, lowering flank wear and preserving dimensional accuracy. In practical terms, the controlled chips reduce manual intervention at the machine, simplify swarf handling and contribute to safer, more efficient turning processes. Integration into workshop processes and tool systems The insert is compatible with standard toolholder systems that accept the TS11 family designation, enabling straightforward integration into existing workflows. The coated grade’s focus on rostfreier Stahl means consistent performance when machining austenitic and other stainless alloys; tool change intervals become more predictable and planning for production capacity is simplified. The robust chip control also supports automated and lights-out operations by minimising stoppages due to entangled swarf. For machining rostfreier Stahl with higher process security, request application guidance from Metav Werkzeuge and consider the TS11-IR1.25ISO WMP32G insert as part of a productivity-focused tooling strategy — contact Metav Werkzeuge for tailored recommendations and stock information. Technical Data Article number: TS11-IR1.25ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS11-IR1.25ISO WMP32G Walter Tools SKU: TS11-IR1.25ISO-WMP32G-WALTER Facts Coating technology: Tiger‑tec Gold Grade / sort: WMP32G Chipbreaker: IR1.25ISO Material designation: M (rostfreie Stähle) Special features Coated carbide substrate Designed for rostfreier Stahl applications Stable chip formation and edge security Suitable for standard TS11 toolholders FAQ What materials is this insert intended for? The TS11-IR1.25ISO WMP32G insert from Walter Tools is intended primarily for rostfreier Stahl and related stainless alloys. How does the IR1.25ISO chipbreaker help in production? The IR1.25ISO chipbreaker on the WMP32G grade ensures short, controlled chips, improving swarf handling and reducing machine downtime. Can the coated grade handle demanding turning conditions? The Tiger‑tec Gold coating of the WMP32G insert provides wear resistance and thermal stability suited to the demanding conditions encountered when machining rostfreier Stahl. Is this insert compatible with existing TS11 toolholders? The TS11-IR1.25ISO geometry is designed for compatibility with standard holders accepting TS11-type inserts, facilitating easy integration. What benefits does WMP32G offer over general-purpose grades? WMP32G combines a robust coating and substrate to deliver stable cutting edges, improved chip control and more predictable tool life when machining rostfreie Stähle. Hersteller: Walter Tools; Head office: Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only and do not indicate any affiliation between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TS11-IR1.5ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP22G grade and the IR1.5ISO chipbreaker for reliable machining of stainless steel and extended tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS11-IR1.5ISO WMP22G indexable turning insert for stainless steel – Walter Tools The TS11-IR1.5ISO WMP22G is an indexable turning insert engineered for medium to robust machining of stainless steel, offering stable chip formation and consistent cutting-edge performance under demanding thermal and mechanical loads. Tiger·tec Gold coating for stable cutting edge WMP22G grade optimised for stainless steel IR1.5ISO chipbreaker for predictable chip flow Designed for medium to robust machining Consistent chip control reduces downtime and scrap The Tiger·tec Gold coating combined with the IR1.5ISO chipbreaker delivers predictable chip formation when machining stainless steel. These alloys tend to be tough and produce long, stringy chips; the chipbreaker geometry actively segments and evacuates chips to reduce re-cutting and the risk of built-up edge. As a result, process stability improves and machine idle time for clearing chips is reduced, which supports higher throughput in serial production. Increased tool life and repeatable performance The WMP22G grade is a coated carbide formulation that balances wear resistance with fracture toughness for extended cutting-edge life in elevated temperatures typical of stainless steel cutting. The coating technology enhances thermal protection and helps maintain a stable cutting edge, so fewer index changes are required over production runs. This leads to lower tool consumption per part and more predictable maintenance intervals—key factors for cost-efficient turning operations. Practical machining benefits for workshop and production floors With a geometry optimised for medium to robust feeds, this insert supports secure cutting under varying cutting conditions. The insert’s design reduces the likelihood of built-up edge and improves surface finish in many stainless steel applications. Operators and process planners benefit from easier parameter ramp-up and fewer trial passes, helping to shorten setup times and increase first-part quality in turning centres and lathes. Selection and application guidance for reliable results When integrating this insert into a tooling system, pair it with stable clamping and appropriate coolant strategy to maximise the advantages of the Tiger·tec Gold surface layer and WMP22G microstructure. For finishing passes, moderate feed rates and higher cutting speeds may exploit the coating’s thermal resilience, while for heavier cuts the chipbreaker geometry helps maintain safe chip flow. Metav Werkzeuge can provide cutting data tailored to specific stainless steel grades and machine capabilities. For machining stainless steel with the proven Tiger·tec Gold performance of Walter Tools, contact Metav Werkzeuge for technical advice or to secure supply; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS11-IR1.5ISO-WMP22G-WALTER Name: TS11-IR1.5ISO WMP22G Manufacturer: Walter Tools Product type: indexable turning insert Core data Grade: WMP22G Chipbreaker: IR1.5ISO Series: Tiger·tec Gold Material group code: M Special features Coating technology: Tiger·tec Gold Suitable application: stainless steel Material type: coated carbide Typical use: medium to robust turning operations FAQ What materials is this insert suitable for? The TS11-IR1.5ISO WMP22G insert is optimised for machining stainless steel and achieves stable chip control and edge life under typical stainless-steel cutting conditions. Which features of the WMP22G grade help in stainless steel machining? The WMP22G grade combines a wear-resistant coating with a tough carbide substrate, ensuring a stable cutting edge and longer tool life during stainless-steel turning. How does the IR1.5ISO chipbreaker affect cutting performance? The IR1.5ISO chipbreaker promotes segmented chip formation, improving evacuation and reducing re-cutting; this leads to fewer interruptions and better surface quality when machining stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS11-IR1.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
A precise combination of Tiger·tec Gold coating and the IR1.5ISO chipbreaker ensures controlled chip formation and extended edge life for machining stainless steel; the result is reliable productivity and consistent surface quality. Order the TS11-IR1.5ISO WMP32G indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TS11-IR1.5ISO WMP32G indexable turning insert, Tiger·tec Gold coated — Walter Tools TS11-IR1.5ISO WMP32G is designed as a robust indexable turning insert for demanding stainless steel applications, combining a dedicated chipbreaker with a high-performance coated carbide grade Tiger-tec Gold coated grade WMP32G Optimised IR1.5ISO chipbreaker Suited for stainless steel machining Stable chip formation, long edge life High-performance cutting for stainless steel The WMP32G grade, part of the Tiger·tec Gold series, is a coated carbide developed for the specific challenges of machining stainless steel. This material group tends to produce high temperatures and built-up edge; the combination of a wear-resistant coating and a specially tuned cutting edge reduces friction and supports predictable chip control. The IR1.5ISO chipbreaker geometry promotes short, manageable chips under medium to robust cutting conditions, which lowers the risk of surface damage and improves tool life. Coated carbide is explained here as a hard substrate with a thin functional coating that increases thermal and abrasive resistance, resulting in more consistent performance on tough-to-cut alloys. Increased process reliability and shop-floor efficiency Choosing this insert translates directly into fewer tool changes and steadier cycle times. The stable cutting edge of the indexable insert reduces the occurrence of built-up edge when turning stainless steel, which in turn improves surface finish and reduces rework. Predictable chip behaviour minimises stoppages caused by chip jamming and enables higher average material removal rates. For production environments focused on throughput and repeatability, the insert’s combination of coating and chipbreaker therefore yields a measurable effect on overall process efficiency and cost per component. Practical machining guidance and mounting considerations The TS11 geometry combined with the IR1.5ISO chipbreaker suits common turning operations where interrupted cuts or variable feeds are present. Insert seating must be clean and secure to avoid vibration and uneven wear; a correctly matched tool holder ensures the intended cutting geometry performs as designed. For finishing passes, moderate reductions in feed and speed reduce heat input and prolong edge life; for roughing, the insert’s robust grade provides the required edge strength. If a change in cutting conditions is needed, altering feed rates or entering light contours will typically maintain the short-chip behaviour and consistent performance. Contact Metav Werkzeuge for tailored machining advice and ordering of Walter Tools TS11-IR1.5ISO WMP32G inserts Technical Data Article number: TS11-IR1.5ISO-WMP32G-WALTER Product type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Core specifications Chipbreaker: IR1.5ISO Coating: Tiger·tec Gold Material group: M Application: stainless steel Features Coated carbide Stable chip formation Medium to robust cutting conditions FAQ What materials is this insert intended for? The insert is specified for machining stainless steel; the WMP32G grade and Tiger·tec Gold coating provide the required wear resistance and chip control. How does the IR1.5ISO chipbreaker affect machining? The IR1.5ISO chipbreaker produces short, controlled chips in medium to robust conditions, improving chip evacuation and reducing the risk of built-up edge. Is this insert suitable for finishing and roughing? Yes; the insert’s coated carbide grade offers edge strength for roughing while the chip control supports improved surface quality during finishing. Which brand produces this insert and what is its range characteristic? This insert is from Walter Tools, part of the Tiger·tec Gold series, characterised by high process stability and good chip control for stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS11-IR1.5ISO-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating, WMP32G grade and optimised chip control to achieve reliable machining of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application support. TS11-IR1.5ISO-F5 WMP32G Turning indexable insert for rostfreier Stahl – Walter Tools The TS11-IR1.5ISO-F5 WMP32G is an indexable turning insert designed for medium to robust stainless‑steel machining, combining a Tiger‑tec Gold coating with a dedicated IR1.5ISO‑F5 chipformer for secure chip formation. Tiger‑tec Gold coating for long life Optimised chip control IR1.5ISO‑F5 Designed for rostfreier Stahl machining Improve cycle times with consistent cutting performance The coated carbide composition and the Tiger‑tec Gold technology provide consistent cutting performance under demanding conditions. The WMP32G grade is formulated for rostfreier Stahl, a group of materials that typically generate heat and tend to work‑harden; the result is improved process stability and a lower risk of unexpected wear. Using an insert with a dedicated chip control geometry reduces interruptions caused by poor chip formation, delivering measurable benefits to cycle time and overall productivity on turning centres and lathes. Secure chip formation for safer, more predictable machining Stainless alloys often require a chipformer that prevents tangled chips and reduces heat concentration at the cutting edge. The integrated IR1.5ISO‑F5 chipbreaker is engineered to shape chips reliably during medium to heavy cuts, supporting a stable cutting edge and predictable tool life. The carbide substrate, combined with the coating, helps maintain sharpness longer and supports repeatable surface quality, so scheduled tool changes and downtime become more predictable and easier to plan. Better surface finish and repeatability in production A robust grade like this one contributes directly to part quality: stable edge control minimises vibration and microchatter, helping to achieve better surface integrity on turned components. The combination of coated carbide and the Tiger‑tec Gold technology enhances wear resistance and thermal tolerance, which in turn supports consistent dimensional accuracy across batches. For manufacturers aiming for repeatable, high‑quality turning results in rostfreier Stahl, the right insert grade reduces scrap and rework and supports overall process efficiency. Practical selection and application guidance This insert is suitable for applications that demand reliable performance in rostfreier Stahl under medium to robust cutting conditions; appropriate clamping and machine rigidity remain important for optimal results. The TS11‑IR1.5ISO‑F5 WMP32G performs best where chip evacuation and edge stability are priorities. For bespoke recommendations on feed and speed ranges or to confirm compatibility with a particular machining setup, Metav Werkzeuge offers application consultation and can provide tailored advice based on production requirements. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger‑tec Gold inserts and availability Technical data Article number: TS11-IR1.5ISO-F5-WMP32G-WALTER Product: Drehwendeschneidplatte / turning indexable insert Manufacturer: Walter Tools Core specifications Grade: WMP32G Chipbreaker: IR1.5ISO-F5 ISO designation: TS11-IR1.5ISO-F5 WMP32G Application group: ISO M (rostfreie Stähle) Features & materials Series: Tiger‑tec Gold Material: coated carbide Suitable for: rostfreier Stahl Benefit: stable chip formation and robust cutting edge FAQ Is this insert suitable for stainless steel turning? Yes. The insert is formulated for rostfreier Stahl (ISO group M) and combines the WMP32G grade with Tiger‑tec Gold coating to support secure chip formation. What is the primary advantage of the IR1.5ISO‑F5 chipbreaker? The IR1.5ISO‑F5 chipbreaker is designed to shape chips reliably during medium to robust cuts, improving evacuation and protecting the cutting edge for more predictable tool life. Can the insert be used where surface finish is critical? Yes. The combination of a coated carbide substrate and a stable geometry helps achieve consistent surface quality and repeatable dimensional accuracy in serial production. Who manufactured this insert and how is its reliability described? The insert is a Walter Tools product; Walter is recognised for precision cutting tools and offers solutions aimed at high process security and consistent results. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for identification and explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product from the manufacturer.
TS11-IR1.5ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of efficient chip control, stable edge life and the Tiger·tec Gold coating for reliable productivity in rostfreier Stahl machining; order the insert directly via Metav Werkzeuge or consult the technical team for cutting data. TS11-IR1.5ISO-M5 WMP32G – indexable turning insert for rostfreier Stahl, Tiger·tec Gold (Walter Tools) The TS11-IR1.5ISO-M5 WMP32G is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, offering optimised chip control and enhanced edge stability for demanding production environments Tiger·tec Gold coating for extended tool life Optimised IR1.5ISO chip control Designed specifically for rostfreier Stahl machining Stable cutting edge under medium to robust conditions Higher productivity through optimised chip control The Tiger·tec Gold grade WMP32G combines a wear-resistant coating with a geometry tuned for secure chip evacuation. The integrated IR1.5ISO-M5 chipbreaker is designed to fragment and guide chips reliably when machining rostfreier Stahl, reducing the risk of built-up edge and improving surface consistency. As a result, cycle times can be shortened and tool change intervals extended, which supports steady production throughput. The insert’s geometry contributes to predictable chip flow, lowering the likelihood of interruptions and increasing machine uptime. Consistent edge life and process reliability The coated carbide composition of the cutting grade ensures edge stability across varying depths of cut typical for medium to robust operations. The WMP32G sort, developed under the Tiger·tec Gold technology, balances hardness and toughness to withstand thermal loads associated with rostfreier Stahl. This balance reduces flank wear and prolongs tool life, which has a positive effect on piece cost and repeatability of dimensional results. The result is a measurable improvement in process security and consistent component quality in serial production. Practical application and quick integration into machining processes The insert is available in the TS11 designation and is compatible with standard toolholders for indexable turning. The chipbreaker designation IR1.5ISO-M5 indicates a controlled chip form suitable for interrupted or continuous cuts commonly encountered with rostfreier Stahl components. For engineers and process planners, the cutting grade offers straightforward selection criteria: a coated carbide intended for moderate to robust stainless operations where stable chip control and edge preservation are required. Basic setup guidelines and recommended cutting parameters help integrate the insert into existing programmes with minimal iteration. For technical advice on integrating Tiger·tec Gold inserts into production or to procure the TS11-IR1.5ISO-M5 WMP32G from Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical Data Article number: TS11-IR1.5ISO-M5-WMP32G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR1.5ISO-M5 Manufacturer: Walter Tools Facts Designation includes TS11 and M5 indicators Chipbreaker size reference: 1.5 (IR1.5) Applicable material group code: M (rostfreie Stähle) Special features Coating technology: Tiger·tec Gold Material composition: coated cemented carbide Typical application: rostfreier Stahl machining Performance focus: chip control and edge stability FAQ What materials is the TS11-IR1.5ISO-M5 WMP32G suited for? The TS11-IR1.5ISO-M5 WMP32G is formulated for machining rostfreier Stahl and performs under medium to robust cutting conditions. How does the IR1.5ISO-M5 chipbreaker improve machining? The IR1.5ISO-M5 chipbreaker produces controlled chip forms that reduce built-up edge and promote secure evacuation when working with rostfreier Stahl, improving surface finish and process stability. Is the insert part of a coated carbide series? Yes, the insert belongs to the Tiger·tec Gold series and the WMP32G coated carbide grade for enhanced wear resistance and thermal stability. Can the insert be used in interrupted cuts? The geometry and chip control of this insert support both continuous and intermittent cutting scenarios commonly found in rostfreier Stahl turning operations. Where can technical cutting data for this insert be obtained? Technical cutting data and application guidance for the TS11-IR1.5ISO-M5 WMP32G are available from Metav Werkzeuge; the insert’s specifications and recommended parameters are provided to support reliable integration. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
TS11-IR1.75ISO WMP32G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WMP32G grade for secure chip formation and extended tool life; ideal for machining stainless steels under medium to robust cutting conditions. Order the TS11-IR1.75ISO WMP32G insert directly via Metav Werkzeuge or ask our consultants if needed. TS11-IR1.75ISO WMP32G — Turning insert (Tiger·tec Gold) for stainless steel, Walter Tools TS11-IR1.75ISO WMP32G is an indexable turning insert engineered for reliable chip control and consistent edge performance when machining stainless steels Tiger·tec Gold coating for extended tool life WMP32G grade for machining stainless steel IR1.75ISO chipbreaker for stable chip control Reliable performance under medium to robust cuts Designed for demanding stainless-steel turning The combination of Tiger·tec Gold coating and the WMP32G carbide grade delivers a balance of wear resistance and toughness tailored to the challenges of stainless steel. Materials in the ISO M group tend to work-harden and generate significant heat; the coated substrate supports secure chip formation and reduces the risk of built-up edge. For production environments this means fewer unplanned tool changes and a steadier surface finish, contributing to predictable cycle times and reduced scrap rates. Technical users will appreciate that the insert’s materials and coating technology are selected to withstand the thermal and mechanical loads typical of medium to robust turning operations. Consistent chip control to increase productivity The integrated IR1.75ISO chipbreaker is configured to produce controllable, repeatable chip shapes when turning stainless steel, which decreases the likelihood of chip-related interruptions. Stable chip evacuation lowers the chance of re-cutting and supports consistent cutting forces, helping to maintain a reliable cutting edge for longer. The net effect is a measurable uplift in throughput: fewer tool stops and improved process stability. Where high component quality and uptime are priorities, the insert’s chip management and edge integrity translate directly into operational efficiency and lower cost per component. Practical integration and application guidance As an indexable turning insert, the TS11-IR1.75ISO WMP32G fits standard toolholders for turning applications and is suitable for jobs that demand robust performance in the M material group. The grade is optimised for stainless-steel applications under medium to robust cutting parameters, offering a pragmatic trade-off between toughness and wear resistance. Selection of cutting data should account for the workpiece alloy and part geometry; when in doubt, Metav Werkzeuge can advise on feed, speed and coolant strategy to achieve the desired surface finish and tool life. The result is a reliable component in the tooling setup that supports repeatable machining campaigns. For machining stainless steels with proven process security, contact Metav Werkzeuge to discuss Walter Tools inserts and application options — email info@metav-werkzeuge.com or call +49 2822 7131930 to review suitability and availability Technical Data Article number: TS11-IR1.75ISO-WMP32G-WALTER Designation: TS11-IR1.75ISO WMP32G Manufacturer: Walter Tools Product type: Turning insert Key specifications Material group: M Suitable for: stainless steel (ISO M) Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR1.75ISO Special features Coated carbide grade (Tiger·tec Gold) Optimised for secure chip formation Stable cutting edge for medium to robust cuts Designed for turning/indexable tool systems ISO designation TS11-IR1.75ISO WMP32G FAQ What materials is this insert intended for? The TS11-IR1.75ISO WMP32G insert is intended primarily for stainless steel (ISO group M), where its coated grade supports secure chip formation and resistance to work-hardening. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating increases wear resistance and thermal stability, which helps the insert maintain edge integrity and extend tool life during demanding stainless-steel turning tasks. What role does the IR1.75ISO chipbreaker play? The IR1.75ISO chipbreaker shapes chips to allow controlled evacuation, reducing the risk of chip interference and contributing to consistent cutting forces and surface quality. Is this insert compatible with standard turning toolholders? Yes, the insert is an indexable turning insert designed to fit common toolholder systems; verify holder compatibility with the ISO designation TS11-IR1.75ISO WMP32G. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. No association exists between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
TS11-IR14NPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold performance, WMP32G wear resistance and precise chip control for consistent machining of stainless steel; order directly via Metav Werkzeuge or contact our specialists for application advice. TS11-IR14NPT WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) A high-performance indexable turning insert, TS11-IR14NPT WMP32G, designed for reliable machining of stainless steel under medium to robust cutting conditions Tiger‑tec Gold coated carbide grade WMP32G Optimised for stainless steel machining Stable chip control with IR14NPT breaker High wear resistance and process stability Faster, more reliable stainless steel turning through optimized coating and geometry The combination of the Tiger‑tec Gold coating and the WMP32G grade delivers improved resistance to abrasive and adhesive wear when machining stainless steel. This coated carbide chemistry supports stable chip formation, reducing the tendency for built-up edge under higher temperatures typical of stainless machining. The result is a measurable improvement in process reliability and longer tool life, which contributes to fewer interruptions and increased productivity in batch and continuous turning operations. Controlled chips and consistent surface quality with the IR14NPT breaker The integrated IR14NPT chipbreaker is engineered to produce dependable chip shapes in demanding workpiece materials, minimising entanglement and improving evacuation. Controlled chips reduce the risk of workpiece damage and tool regrind frequency, while the stable cutting edge fosters consistent surface finish. For production environments this translates into fewer rejects and less rework, with predictable tool-change intervals and better utilisation of machine time. Practical integration into existing turning systems for economic machining The insert’s TS11 geometry ensures compatibility with standard clamping systems and facilitates fast index changes, helping to keep setup times low. In practical terms, shops machining stainless steel can expect improved cycle times and repeatable results when the insert is used with appropriate toolholders and cutting parameters. For specific cutting data, holder compatibility or recommendations for feed and speed, technical consultation is available to ensure optimal integration into existing processes. Contact Metav Werkzeuge for tailored application advice and to procure the TS11-IR14NPT WMP32G indexable turning insert from Walter Tools; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS11-IR14NPT-WMP32G-WALTER Product designation: TS11-IR14NPT WMP32G Product type: Indexable turning insert Facts Series: Tiger‑tec Gold Grade: WMP32G (coated carbide) Chipbreaker: IR14NPT Applicable material group: M (stainless steel) Special features Coating technology: Tiger‑tec Gold Optimised for stainless steel machining Stable chip control and wear resistance Manufacturer: Walter Tools FAQ What materials is this insert suited to? The TS11-IR14NPT WMP32G is optimised for stainless steel (material group M) and performs well under medium to robust cutting conditions. What does the WMP32G grade offer? WMP32G is a coated carbide grade within the Tiger‑tec Gold family that provides enhanced wear resistance and stable cutting-edge behaviour when machining stainless steels. How does the IR14NPT chipbreaker help production? The IR14NPT chipbreaker reliably forms controllable chips that improve evacuation, reduce entanglement and support consistent surface quality during turning. Is the insert compatible with standard TS11 toolholders? Yes, the TS11 geometry is designed for compatibility with standard TS11 clamping systems, enabling quick indexing and straightforward integration into existing toolsets. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools is a brand of Walter AG, part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The offered item is an original, factory-new product of the manufacturer.
TS11-IR14UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for consistent cutting performance and reliable chip control in stainless steel machining; the IR14UN chipbreaker supports stable swarf formation and reduced edge build-up. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TS11-IR14UN WMP32G turning indexable insert – Tiger·tec Gold for stainless steel (Walter Tools) The TS11-IR14UN WMP32G is a coated carbide turning insert from the Tiger·tec Gold series designed to provide stable chip formation and dependable cutting performance in medium to robust stainless steel machining tasks. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steel IR14UN chipbreaker for stable swarf control Designed for medium to robust machining conditions Consistent chip control for challenging stainless steel work The combination of the WMP32G grade and the IR14UN chipbreaker addresses common challenges when machining stainless steel, such as material tenacity and heat generation. The coated cemented carbide grade is formulated to maintain a stable cutting edge under adverse conditions, reducing the risk of built-up edge and ensuring more predictable component tolerances. In practical terms, this means fewer interrupted cycles for regrinding and more consistent surface finishes across batches. Boosted productivity through durable coating technology Thanks to the Tiger·tec Gold technology, the insert offers enhanced wear resistance and thermal stability compared with uncoated alternatives. The coating supports higher cutting parameters where applicable, which can translate into improved material removal rates and reduced tooling costs per component. The resulting longer tool life and fewer tool changes contribute directly to process efficiency and steady production flow in industrial turning operations. Reliable performance and straightforward integration The ISO designation and the robust design make integration into standard turning toolholders straightforward. The insert’s geometry and chipbreaker are optimised for secure swarf evacuation, which supports uninterrupted machining in medium to robust applications. As part of the Walter Tools portfolio, this insert is intended for users seeking process security and repeatable results when working with stainless steel in demanding environments. Contact Metav Werkzeuge for tailored application advice on the Walter Tools TS11-IR14UN WMP32G turning insert and to discuss suitability for specific stainless steel tasks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: TS11-IR14UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS11-IR14UN WMP32G Walter Tools Product type: Drehwendeschneidplatte (turning indexable insert) ISO designation: TS11-IR14UN WMP32G Manufacturer: Walter Tools Core Data Material code: M Suitable for material group: M (stainless steel) Series: Tiger·tec Gold Special features Coated cemented carbide grade WMP32G Chipbreaker: IR14UN Optimised for stable chip formation Intended for medium to robust machining conditions Designed to reduce built-up edge and improve process security FAQ Which materials is this insert suitable for? The TS11-IR14UN WMP32G insert is formulated for stainless steel applications; the WMP32G grade supports secure chip formation when machining these materials. What does the Tiger·tec Gold series provide? Tiger·tec Gold coating on the TS11-IR14UN WMP32G delivers improved wear resistance and thermal stability, helping the insert maintain cutting performance under higher loads. How does the IR14UN chipbreaker affect machining? The IR14UN chipbreaker promotes stable swarf control and reduces the tendency for built-up edge when machining stainless steel with the Walter Tools turning insert. Is this insert suitable for heavy roughing? The grade and chipbreaker are intended for medium to robust machining conditions; for heavy roughing, the TS11-IR14UN WMP32G offers enhanced edge stability compared with standard grades. Where can I get technical advice about using this insert? Technical and application advice for the TS11-IR14UN WMP32G turning insert is available from Metav Werkzeuge; their consultants can help specify feeds, speeds and insert selection for stainless steel tasks. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the cited brands; the offered article is an original, brand-new product from the manufacturer.
TS11-IR14W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from extended tool life and reliable chip control thanks to the combination of the Tiger‑tec Gold grade and the IR14W chipbreaker; order or discuss application requirements directly via Metav Werkzeuge for seamless production integration. TS11-IR14W WMP32G — Indexable turning insert, Tiger‑tec Gold grade for stainless steel (Walter Tools) The TS11-IR14W WMP32G is an indexable turning insert engineered for machining rostfreie Stähle under medium to robust cutting conditions, combining a coated‑carbide grade with an optimised chipbreaker for consistent performance. Tiger‑tec Gold coating for longer tool life Optimised chipbreaker IR14W for secure chip control Designed for stainless steel machining (M group) Consistent, productive cutting performance Reliable performance for stainless‑steel turning The insert is based on the WMP32G coated‑carbide grade, developed within the Tiger‑tec Gold family to address the specific demands of stainless steel. The combination of a wear‑resistant coating and a substrate optimised for toughness reduces the tendency for built‑up edge and supports stable chip formation, which in turn lowers scrap rates and improves process predictability. This technical balance ensures that machining cycles remain productive even under moderate to heavy engagement. Secure chip control and improved surface results Equipped with the IR14W chipbreaker, the geometry promotes controlled chip segmentation and evacuation when cutting rostfreie Stähle. Controlled chips reduce rework and tool interference, while the insert’s cutting edge geometry contributes to a consistent surface finish without aggressive parameter changes. For production environments that prioritise repeatability, the predictable chip behaviour helps to maintain cycle times and surface quality across batches. Process security and economical tool life The coated carbide grade delivers a pragmatic combination of wear resistance and edge stability that supports extended operating windows. In practice, the Tiger‑tec Gold technology translates into reduced frequency of indexings and insert changes, lowering downtime and overall tooling consumption. The insert therefore supports a favourable cost‑to‑performance ratio in series production where reliability and consistent results are decisive. Application range and handling recommendations This insert is specified for the ISO M group, i.e. stainless steel machining, and is suitable where medium to robust cutting conditions are encountered. The geometry and grade make it a good choice for general turning operations requiring predictable chip control and durable cutting edges. For machine setup and parameter optimisation, refer to the machine tool manufacturer’s guidance and the cutting data tables of the tooling system in use; matching feed and depth of cut to the material condition will ensure best results. For application advice or availability of the Tiger‑tec Gold WMP32G inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations and fast delivery. Technical data Article number: TS11-IR14W-WMP32G-WALTER SKU: TS11-IR14W-WMP32G-WALTER Product type: Indexable turning insert Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR14W Material group: M (stainless steel) Special features Coated carbide (Tiger‑tec Gold technology) Optimised chip control for rostfreie Stähle Suitable for medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is the TS11-IR14W WMP32G suitable for? The TS11-IR14W WMP32G is designed primarily for rostfreie Stähle (ISO group M) and performs well under medium to robust cutting conditions. How does the IR14W chipbreaker affect machining? The IR14W chipbreaker on the TS11-IR14W WMP32G promotes controlled chip formation and evacuation, improving process stability and surface finish when turning stainless steel. What benefits does the Tiger‑tec Gold grade provide? The Tiger‑tec Gold grade used in the WMP32G provides enhanced wear resistance and edge stability, which extends the productive life of the insert and reduces indexings. Is the insert suitable for heavy interrupted cuts? The TS11-IR14W WMP32G is specified for robust conditions; its coated‑carbide construction and edge strength offer good resistance to tougher engagements typical in such applications. How should tool wear be monitored for this insert? Monitor flank and crater wear relative to established tool‑change criteria; the WMP32G grade tends to show gradual wear progression, enabling predictable maintenance intervals. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the referenced manufacturers. The offered item is an original, factory‑new product from the stated manufacturer.
TS11-IR14W-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G coated‑carbide grade for secure chip formation and long tool life when machining stainless steel; order the insert directly via Metav Werkzeuge or contact their consultants for tailored cutting data. TS11-IR14W-F5 WMP32G – indexable turning insert, Tiger‑tec Gold coating, for stainless steel (Walter Tools) TS11-IR14W-F5 WMP32G is an indexable turning insert designed for medium to robust machining conditions on stainless steel, combining a Tiger‑tec Gold coating with an IR14W‑F5 chipbreaker to support stable cutting performance. Tiger‑tec Gold coated carbide WMP32G Chipbreaker IR14W‑F5 for stable chips Optimised for machining stainless steel Walter Tools quality and repeatability Reliable cutting performance in stainless steel applications The coated‑carbide grade WMP32G, combined with the Tiger‑tec Gold technology, provides a balanced mix of wear resistance and toughness suited to the demands of stainless steel (ISO group M). The micro‑structure of the coating reduces adherence and the tendency for built‑up edge, which leads to more consistent tool life and fewer interruptions for regrinding or replacement. The result is a measurable increase in process reliability and improved surface finish under medium to robust cutting conditions, which supports predictable production planning. Efficient chip control that reduces downtime The integrated IR14W‑F5 chipbreaker promotes stable chip formation, crucial when machining alloys that generate long, stringy chips. By controlling chip shape and evacuation, the insert minimises the risk of tool‑path interruption and machine stoppages, thus contributing to higher machine utilisation. Clear chip control also lessens the need for secondary operations and reduces manual intervention at the machine, improving overall throughput and shop‑floor safety. Practical benefits for workshop productivity and consistency Engineered for repeatable performance, the TS11‑IR14W‑F5 WMP32G indexable insert supports extended intervals between tool changes and consistent part quality. The combination of grade and chipbreaker reduces scrap rates and supports a steady production rhythm, which is especially valuable in batch manufacturing or long runs. Walter Tools’ focus on stable cutting edges and broad material coverage ensures reliable results across a range of stainless steel alloys, helping maintain cost‑effective operations and confident process planning. Contact Metav Werkzeuge for cutting data, availability and personalised application advice on Walter Tools Tiger‑tec Gold inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS11-IR14W-F5-WMP32G-WALTER Article: Drehwendeschneidplatte TS11-IR14W-F5 WMP32G Walter Tools Manufacturer: Walter Tools Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR14W‑F5 Type: indexable turning insert Application group: stainless steel (M) Facts Material group suitability: M (stainless steel) Coating category: Tiger‑tec Gold (coated carbide) Product type: indexable insert Brand: Walter Tools Special features Coated carbide grade WMP32G Optimised for medium to robust conditions IR14W‑F5 chipbreaker for stable chips Suitable for stainless steel machining Focus on secure chip formation and consistent wear FAQ What material is the TS11-IR14W-F5 WMP32G designed for? The TS11‑IR14W‑F5 WMP32G insert is engineered for machining stainless steel (ISO group M), offering chip control and edge stability for this material family. How does the Tiger‑tec Gold coating benefit the insert? The Tiger‑tec Gold coating on the WMP32G grade enhances wear resistance and reduces adhesion, which improves tool life and maintains consistent cutting edges when machining stainless steels. Which chipshape can be expected with the IR14W‑F5 chipbreaker? The IR14W‑F5 chipbreaker produces controlled, short to medium chips that evacuate reliably, lowering the chance of entanglement and reducing machine interruptions. Is the insert suitable for robust cutting conditions? Yes, the TS11‑IR14W‑F5 WMP32G is intended for medium to robust cutting scenarios, where its coated‑carbide grade and chipbreaker preserve tool life and process stability. Can the insert support longer production runs with consistent quality? The combination of WMP32G grade and Tiger‑tec Gold technology is designed to deliver repeatable performance and reduced variability, supporting longer runs with stable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original factory‑new goods from the manufacturer.
TS11-IR16UN WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold surface technology and the WMP32G grade delivers stable edge life and reliable chip control for rostfreier Stahl machining; benefit from consistent productivity and lower rework rates. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS11-IR16UN WMP32G Turning Insert for rostfreier Stahl by Walter Tools TS11-IR16UN WMP32G is a coated, indexable turning insert designed for robust machining of rostfreier Stahl under medium to heavy cutting conditions Tiger·tec Gold coating for long tool life Optimised chip control for rostfreier Stahl Robust, coated cemented carbide grade WMP32G Consistent edge stability in medium to heavy cuts Reliable machining of rostfreier Stahl with reduced risk of built-up edge The TS11-IR16UN WMP32G turning insert combines a coated cemented carbide substrate with the Tiger·tec Gold technology to address the typical challenges of rostfreier Stahl: high toughness, tendency for built-up edge and elevated cutting temperatures. The WMP32G grade is tuned for secure chip formation and edge preservation, which reduces the frequency of tool changes and improves component quality. This behaviour translates into fewer interruptions on the shop floor and more predictable cycle times for batch production. Stable chip control that improves surface finish and cycle time An optimised IR16UN chipbreaker promotes consistent chip formation during turning operations, minimising snarled or stringy chips that can damage the workpiece or the tool. The combination of chip control and the Tiger·tec Gold surface treatment enhances thermal stability and edge stability, which in turn supports a superior surface finish and reduces rework. For process planners, this insert is a rational choice when efficiency and repeatability are primary goals. Durable performance that supports productive machining The coated grade offers elevated wear resistance under the intermittent thermal and mechanical loads typical when machining rostfreier Stahl. This durability is particularly relevant in automated or lights-out operations where tool life consistency is critical. By selecting an insert with proven coating technology and an application-focused grade, production lines see improved uptime and a clearer cost-per-part calculation. Practical selection and compatibility guidance for toolmakers When specifying an indexable insert, verify the ISO designation and match the TS11-IR16UN geometry to the appropriate toolholder and clamping system. The WMP32G grade suits medium to robust cutting conditions on rostfreier Stahl; adapt cutting data conservatively at first and monitor tool wear patterns. For mixed production environments, the insert’s combination of chip control and edge protection makes it suitable for series production where material variability can otherwise compromise consistency. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools TS11-IR16UN WMP32G insert into existing tool systems or for recommendations based on specific rostfreier Stahl grades and machining strategies. Technical data SKU: TS11-IR16UN-WMP32G-WALTER Article designation: TS11-IR16UN WMP32G Product type: Turning insert (indexable) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR16UN Material designation: M Manufacturer: Walter Tools Facts No numerical specifications provided in the source data Special features Coated cemented carbide, Tiger·tec Gold technology Suitable for rostfreier Stahl (material group M) Optimised IR16UN chipbreaker for controlled swarf Designed for medium to heavy cutting conditions ISO designation: TS11-IR16UN WMP32G FAQ What materials is this insert intended for? The insert is specified for rostfreier Stahl (material group M); the WMP32G grade and Tiger·tec Gold treatment support stable chip formation when working with tough, austenitic stainless grades. Which machining conditions suit this insert best? This geometry and grade are designed for medium to robust cutting conditions; the IR16UN chipbreaker helps maintain consistent chips and edge life during heavier passes. How does Tiger·tec Gold benefit tool performance? The Tiger·tec Gold surface treatment enhances thermal and mechanical resistance, improving wear resistance and edge stability, which leads to longer effective tool life in demanding rostfreier Stahl applications. How to ensure fitment and compatibility with existing holders? Match the ISO designation TS11-IR16UN and confirm the seat and clamping type of the toolholder; consult fixture specifications and, if necessary, the turning-tool catalogue for geometry compatibility Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, brand‑new product from the manufacturer. The Walter Tools brand is referenced where relevant.
TS11-IR18NPT WMP32G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold wear resistance, the WMP32G grade tuned for rostfreien Stahl and the IR18NPT chipbreaker for reliable chip control; order directly via Metav Werkzeuge or consult the specialists for optimal tool selection. TS11-IR18NPT WMP32G indexable turning insert — Tiger·tec Gold grade by Walter Tools TS11-IR18NPT WMP32G is an indexable turning insert engineered for machining rostfreien Stahl under medium to robust cutting conditions, offering consistent edge stability and controlled chip formation Tiger·tec Gold coating for extended wear resistance Optimised IR18NPT chipbreaker for secure chip control Grade WMP32G for rostfreien Stahl machining Consistent edge stability for productive turning Longer tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WMP32G grade is designed to extend tool life when machining rostfreien Stahl, a material group prone to built-up edge and heat generation. The premium coating reduces flank wear and improves thermal resistance, while the substrate and coating chemistry of the grade support stable chip formation and a durable cutting edge. For production environments where predictable tool life reduces unplanned downtimes, this insert provides a measurable advantage in process stability. Better surface quality and fewer reworks A geometry matched to the IR18NPT chipbreaker delivers controlled chips and consistent cutting forces, which directly benefits component finish and dimensional consistency. Improved chip control reduces the risk of surface damage and simplifies downstream operations, decreasing rework rates. The result is a more reliable manufacturing flow with fewer quality deviations and higher first-pass yield for parts produced from rostfreien Stahl. Broad applicability within stainless steel turning Assigned to ISO group M, this insert is intended for a wide range of rostfreie Stähle, from standard austenitic alloys to more demanding high-alloy grades. The indexable insert format supports rapid replacement and re-indexing, enabling quick restoration of cutting performance without complex setup changes. The chipbreaker geometry balances robustness and chip evacuation, making the insert suitable for both stable series production and shorter batch runs requiring consistent performance. Practical benefits for workshop efficiency Operational advantages include predictable tool-change intervals, consistent edge behaviour and reduced intervention for chip management. Using a grade tuned for rostfreie Stähle together with an optimised chipbreaker supports higher cutting data where appropriate, increasing productivity while maintaining component integrity. Process reliability is enhanced by the insert’s repeatable performance, which contributes to improved throughput and lower total machining hours per part. For a detailed selection tailored to specific machine tools and workpiece alloys, contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and secure the best configuration for your turning application. Technical data Article number / SKU: TS11-IR18NPT-WMP32G-WALTER Designation: TS11-IR18NPT WMP32G Product type: Indexable turning insert Core specifications Material group: M Suitable for: rostfreien Stahl Chipbreaker: IR18NPT Features Series: Tiger·tec Gold Grade: WMP32G Manufacturer: Walter Tools Product family: Turning inserts FAQ What materials is this insert suitable for? The TS11-IR18NPT WMP32G insert is specified for ISO group M, which denotes suitability for rostfreie Stähle; the WMP32G grade and IR18NPT chipbreaker are optimised for these alloys. How does the Tiger·tec Gold series affect tool life? The Tiger·tec Gold coating improves wear resistance and heat tolerance, which extends useful cutting life for inserts used in rostfreien Stahl applications. Can this insert improve surface finish on stainless parts? The combination of the IR18NPT chipbreaker and the WMP32G grade stabilises cutting conditions and chip evacuation, supporting improved surface quality and reduced rework. Is the insert suitable for both serial production and batch machining? Yes; the indexable insert format and robust chip control make it appropriate for stable series production and for shorter runs where consistent performance is required. Who manufactures this insert and what is the SKU? The insert is supplied under the Walter Tools brand with the SKU TS11-IR18NPT-WMP32G-WALTER and the designation TS11-IR18NPT WMP32G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and brand names are the property of their respective owners. There is no connection between our company and the named brands. The offered article is an original factory-new product of the manufacturer. Walter Tools is mentioned for product identification purposes only.
TS11-IR18UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WMP32G grade for stainless steel and optimised chip control, which together deliver reliable edge life and consistent productivity; order genuine inserts via Metav Werkzeuge or speak with their consultants for application-specific advice. TS11-IR18UN WMP32G indexable turning insert — coated carbide for stainless steel (Walter Tools) The TS11-IR18UN WMP32G is an indexable turning insert engineered for machining stainless steel under medium to robust cutting conditions, providing stable chip formation and consistent cutting-edge performance. Coated carbide Tiger‑tec Gold technology Optimised for stainless steel machining Stable chip control with IR18UN breaker Reliable edge life for medium to heavy cuts Consistent performance where heat and toughness matter The combination of Tiger‑tec Gold coating and the WMP32G grade means the insert is formulated for the specific challenges of stainless steel: high toughness, tendency to form built‑up edge and elevated cutting temperatures. The coating reduces friction at the tool–workpiece interface, which supports higher cutting speeds and improves edge life. For production environments seeking predictable cycle times, this results in fewer tool changes and steadier throughput, translating into measurable productivity gains. Predictable chip control and surface quality Equipped with the IR18UN chipbreaker, the insert promotes controlled chip formation and evacuation when turning tough alloys. Controlled chips reduce the risk of part marks and long, entangling swarf, so machining runs are cleaner and safer. The coated carbide construction provides a balance of hardness and toughness: hardness for wear resistance, toughness for shock absorption during interrupted cuts. For operators with varying experience levels, this behaviour simplifies process set‑up and helps achieve repeatable surface finish quality. Application focus and process security Designed as an indexable turning insert for medium to heavy duty operations, the insert is suitable for recurring production and batch work on stainless steel components. The grade supports stable cutting-edge geometry under strain, which improves tolerance retention over multiple indices and reduces the likelihood of unexpected tool failure. In short production cycles where downtime is critical, the insert contributes to higher overall equipment effectiveness and reliable part quality. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools TS11-IR18UN WMP32G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS11-IR18UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS11-IR18UN WMP32G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger‑tec Gold Key figures No dimensional or cutting‑data specifications provided in the source data Features / applications Coating technology: Tiger‑tec Gold Grade: WMP32G (coated carbide) Chipbreaker: IR18UN Material group: M (stainless steel) Suitable for medium to robust machining conditions FAQ What materials is the insert intended for? The TS11-IR18UN WMP32G is intended primarily for stainless steel machining, with the WMP32G grade optimised for such workpiece materials. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating reduces friction and improves thermal resistance, which helps maintain edge stability and allows for higher cutting speeds compared with uncoated grades. What role does the IR18UN chipbreaker play? The IR18UN chipbreaker shapes chips into shorter, controllable forms, improving evacuation and reducing the risk of surface damage or entanglement during turning operations. Is the insert suitable for interrupted cuts or tougher conditions? Yes; the coated carbide composition and the WMP32G grade offer a balance of toughness and wear resistance that is well suited to medium and robust cutting conditions, including some interrupted cuts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation with or endorsement by the brand owner. The offered item is an original, factory‑new product of the respective manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com