TS11-IR19W WMP32G WMP32G Wendeplatten - Walter Tools
High-performance WMP32G grade and the IR19W chipbreaker provide secure chip control and reliable edge stability for machining rostfreier Stahl; combine durability and process reliability for efficient turning operations. Order the TS11-IR19W WMP32G turning insert directly via Metav Werkzeuge or request technical guidance from our consultants. TS11-IR19W WMP32G turning insert — Tiger·tec Gold coating, for rostfreier Stahl (Walter Tools) The TS11-IR19W WMP32G is a coated carbide turning insert from Walter Tools, engineered for medium to robust machining of rostfreier Stahl with an optimised IR19W chipbreaker. Tiger·tec Gold coating for long tool life Optimised IR19W chipbreaker for secure chip control Developed for rostfreier Stahl with stable cutting edge Stable chip control for consistent productivity The coated turning insert combines the IR19W chipbreaker with a grade optimised for tough materials, delivering consistent chip formation and reduced risk of built-up edge. For components made of rostfreier Stahl, which tend to generate heat and exhibit ductility, the geometry and chip control features promote uninterrupted machining, lower rework rates and predictable tool change intervals. This yields tangible process stability and reduced cycle-time variability for batch and single-piece production alike. Coating and grade engineered for longer life and repeatability The WMP32G grade is a coated carbide developed under the Tiger·tec Gold series to balance wear resistance with edge toughness. The coating improves resistance to abrasive and thermal wear while the substrate retains edge integrity under medium to robust cutting conditions. For production planners, this means fewer insert changes and more consistent part quality across shifts. The pairing of Tiger·tec Gold technology with an IR19W chipbreaker aims to deliver reproducible cutting performance and easier tool management on the shop floor. Applications, benefits and selection guidance for rostfreier Stahl Designed for the ISO M material group, this indexable insert suits a range of rostfreier Stahl turning tasks where controlled chip evacuation and edge security are priorities. Typical benefits include improved surface finish consistency and fewer interruptions from built-up edge. When selecting tooling systems, match the insert geometry and clamping to the chosen toolholder and ensure cutting parameters are adapted for ductile, heat-prone materials. For many workshops, the result is higher effective machine uptime and predictable production output. Contact Metav Werkzeuge for tailored cutting data and application support for Walter Tools TS11-IR19W WMP32G; technical consultations are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TS11-IR19W-WMP32G-WALTER Label: Drehwendeschneidplatte TS11-IR19W WMP32G Walter Tools Product type: Turning insert (indexable) Series: Tiger·tec Gold Grade: WMP32G (coated carbide) Chipbreaker: IR19W ISO designation: TS11-IR19W WMP32G Material group suitability: rostfreier Stahl Manufacturer: Walter Tools Core data No detailed numerical specifications provided in the dataset Special features Coating: Tiger·tec Gold Schneidstoffklasse: coated carbide Chip control: IR19W chipbreaker Application: rostfreier Stahl (ISO group M) ISO designation: TS11-IR19W WMP32G SKU: TS11-IR19W-WMP32G-WALTER FAQ Which materials is this insert intended for? The TS11-IR19W WMP32G from Walter Tools is specified for the ISO M group, making it suitable for machining rostfreier Stahl where ductility and heat generation require secure chip control. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold on the WMP32G grade increases wear resistance while preserving edge toughness, helping the insert deliver longer, more consistent performance under medium to robust cutting conditions. What role does the IR19W chipbreaker play? The IR19W chipbreaker is designed to form short, controllable chips and support stable cutting when working with ductile materials such as rostfreier Stahl, reducing the likelihood of built-up edge and improving process reliability. Is this insert suitable for heavy roughing or fine finishing? The grade and chipbreaker combination is described for medium to robust use; selection between roughing and finishing should consider toolholder rigidity and cutting parameters to match the intended operation. Can this insert be integrated into existing toolholder systems? The ISO designation TS11-IR19W WMP32G identifies the insert form and allows matching to compatible turning toolholders; confirm holder compatibility and clamping specifications before fitting. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and imply no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
TS11-IR19W-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a dedicated IR19W‑F5 chipbreaker and the robust WMP32G grade for secure chip formation and extended edge life in stainless‑steel turning; order original inserts via Metav Werkzeuge or consult our specialists for tailored machining advice. TS11-IR19W-F5 WMP32G indexable turning insert – Tiger‑tec Gold coating, IR19W‑F5 chipbreaker (Walter Tools) The TS11-IR19W-F5 WMP32G is an indexable turning insert engineered for machining stainless steels under medium to robust cutting conditions, combining a Tiger‑tec Gold coating with a chipbreaker designed for stable swarf control. Tiger‑tec Gold coated carbide Optimised for stainless steels (M) IR19W‑F5 for secure chip control Robust edge for medium to heavy cuts Predictable performance when machining stainless steels The combination of a coated carbide grade and a dedicated chipbreaker gives a clear production advantage when working with stainless steels. The WMP32G grade, part of the Tiger‑tec Gold family, is formulated for materials that tend to work‑harden and produce long, stringy swarf; this results in stable chip formation and reduced risk of built‑up edge. For workshops seeking reliable repeatability, the insert’s design reduces process variability and supports consistent cycle times on batch and one‑off turning operations. Enhanced chip control and longer cutting edge life The IR19W‑F5 chipbreaker is optimised to break and evacuate swarf reliably in medium to heavy cuts, which lowers the chance of entanglement and improves surface finish. Coating properties of Tiger‑tec Gold contribute to wear resistance and thermal stability, allowing longer tool life under intermittent high temperatures typical for machining corrosion‑resistant alloys. This translates into fewer indexings and predictable tool‑change intervals, supporting higher uptime on the CNC lathe. Practical fit and application scenarios This insert is supplied in the TS11 geometry and is suitable for standard toolholders that accept the TS11 insert form. It is intended primarily for external turning operations in production and job‑shop environments where stainless‑steel components demand controlled cutting behaviour. The grade and breaker combination is particularly beneficial for operations that alternate between finishing and semi‑roughing passes, thanks to its balance of edge robustness and chip control. Why this insert improves productivity and process security Using a purpose‑matched insert reduces scrap, machine downtime and operator intervention. The WMP32G grade and Tiger‑tec Gold coating support stable cutting edges even under tougher engagement conditions, while the IR19W‑F5 geometry minimises swarf‑related interruptions. For production managers this means more predictable lead times and better reproducibility across parts, which helps meet delivery and quality targets with less rework. Contact Metav Werkzeuge for advice on integrating Walter Tools Tiger‑tec Gold inserts into existing toolsets and to request cutting data tailored to specific stainless‑steel grades Technical Data Article number: TS11-IR19W-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS11-IR19W-F5 WMP32G Walter Tools Type: Indexable turning insert Facts ISO group: M Series: Tiger‑tec Gold Grade: WMP32G Special features Chipbreaker: IR19W‑F5 Coating/technology: Tiger‑tec Gold (coated carbide) Geometry designation: TS11‑IR19W‑F5 Application: stainless steels FAQ What materials is this insert suitable for? The TS11-IR19W-F5 WMP32G insert is designed for stainless steels (ISO group M), offering secure chip formation on tough, heat‑sensitive alloys. How does the IR19W‑F5 chipbreaker improve machining? The IR19W‑F5 breaker promotes reliable chip segmentation and evacuation; with the WMP32G grade and Tiger‑tec Gold coating this reduces the risk of entangling swarf and extends edge life. Is the WMP32G grade coated or uncoated? WMP32G is a coated carbide grade within the Tiger‑tec Gold family, combining a wear‑resistant surface with substrate toughness for repeated performance. Which insert geometry designation should be specified when ordering? Specify the TS11‑IR19W‑F5 WMP32G designation or the SKU TS11-IR19W-F5-WMP32G-WALTER to ensure delivery of the correct insert geometry, breaker and grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and brand names remain the property of their respective owners. Brand names and registered trademarks are used here for explanation only. The offered article is an original, factory‑new product of the manufacturer.
TS11-IR2.0ISO WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Gold coating, the IR2.0ISO chipbreaker and proven edge stability to maintain steady productivity when machining stainless steels; order the insert directly via Metav Werkzeuge or consult our team for application advice. TS11-IR2.0ISO WMP22G indexable turning insert for stainless steel — Walter Tools TS11-IR2.0ISO WMP22G is an indexable turning insert designed for reliable stainless-steel machining in medium to robust cutting conditions, supplied under the Walter Tools Tiger-tec Gold series Tiger-tec Gold coated grade WMP22G IR2.0ISO chipbreaker for stable chips Designed for stainless steel machining High edge stability in medium to heavy cuts Consistent performance for demanding stainless-steel turning The TS11-IR2.0ISO WMP22G insert combines a Tiger-tec Gold coating with a specifically developed grade to address the typical challenges of stainless steel: high toughness, tendency to work-harden and elevated heat generation. The coated cemented carbide substrate improves wear resistance and reduces adhesion to the cutting edge, which in turn supports stable chip formation and reduced downtime for edge changes. For engineers seeking predictable tool life, the insert’s material selection and finish provide a measurable improvement in process reliability without requiring unconventional cutting strategies. Stable chip control that protects the cutting edge The IR2.0ISO chipbreaker geometry is optimised to produce consistent, controllable chips when turning austenitic and other stainless grades. By guiding chips away from the cutting zone and limiting the conditions that promote built-up edge, this geometry helps maintain a steady cutting force and better surface quality. The combination of chip control and a coated cutting edge reduces vibrations and flank wear, translating into fewer interruptions and higher first-pass yield in series production. This is particularly beneficial where process repeatability and piece-to-piece consistency are priorities. Economic benefits through reduced tooling downtime Using a high-performance grade like WMP22G with the Tiger-tec Gold treatment contributes to lower overall tooling costs by extending effective edge life and reducing changeover frequency. The result is high productivity with more parts machined per insert and improved machine utilisation. For production planners, this means a clearer return-on-tooling with shorter recovery times for planned maintenance and better adherence to production schedules. The coated insert’s behaviour under medium to robust conditions supports a stable process window, helping to avoid scrap and rework. Practical integration into turning operations The insert is delivered in the common TS11 geometry, allowing straightforward integration into existing toolholder systems designed for indexable turning inserts. For safe and efficient use, ensure the toolholder provides the correct seating and rigidity required by the TS11 form and select cutting parameters that reflect the material grade and machine capability. If parameter tuning is required, the technical team at Metav Werkzeuge can advise on recommended feeds and speeds and help clarify holder compatibility for specific turning applications. Clear guidance reduces trial time and accelerates ramp-up to full production. For reliable stainless-steel turning with Walter Tools’ Tiger‑tec Gold grade WMP22G, contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS11-IR2.0ISO-WMP22G-WALTER SKU: TS11-IR2.0ISO-WMP22G-WALTER Designation: TS11-IR2.0ISO WMP22G Series: Tiger-tec Gold Grade: WMP22G Facts Chipbreaker designation: IR2.0ISO Material group: M (stainless steels) Coating type: Tiger-tec Gold Geometry: TS11 indexable format Special features Coated cemented carbide construction Optimised for rostfreier Stahl (stainless steel) machining Suitable for medium to robust cutting conditions Focus on stable chip formation and edge life Manufacturer: Walter Tools FAQ What materials is this insert designed for? The TS11-IR2.0ISO WMP22G insert from Walter Tools is optimised for machining stainless steels (material group M), where toughness and heat generation demand a coated grade and controlled chip formation. How does the IR2.0ISO chipbreaker improve performance? The IR2.0ISO chipbreaker shapes and directs chips to reduce built-up edge and stabilise cutting forces; in combination with the Walter Tiger‑tec Gold coating it supports consistent surface finish and longer tool life. Is the WMP22G grade suitable for heavy cuts? WMP22G is intended for medium to robust conditions; the grade’s wear resistance and the insert’s edge stability help maintain performance under higher loads compared with standard uncoated grades. Can this insert be used in existing TS11 toolholders? Yes, the insert follows the TS11 indexable format and is compatible with toolholders designed for that geometry; ensure the holder provides appropriate rigidity and correct seating for safe operation. What are the main advantages compared with an uncoated insert? Compared with uncoated inserts, the Tiger‑tec Gold coating and WMP22G grade reduce adhesive wear and flank degradation, improving process security and increasing the number of parts produced per edge change. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS11-IR2.0ISO WMP32G Wendeplatten - Walter Tools
Benefit from a combination of high process stability, reliable chip control and the wear-resistant WMP32G grade for consistent turning results; the design supports productive machining of stainless steel under medium to robust conditions. Order the TS11-IR2.0ISO WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS11-IR2.0ISO WMP32G — Indexable turning insert with Tiger·tec Gold coating and IR2.0ISO chipbreaker (Walter Tools) The TS11-IR2.0ISO WMP32G is an indexable turning insert developed for machining stainless steel in medium to heavy-duty turning applications, providing controlled chip formation and prolonged edge life. Tiger·tec Gold coating for long tool life IR2.0ISO chipbreaker for stable chip control Designed for stainless steel machining Delivering predictable productivity through optimised grade and coating The combination of the WMP32G grade and Tiger·tec Gold technology prioritises repeatable performance and extended cutting intervals. This coated carbide grade is formulated for the particular demands of stainless steel, where high ductility and heat generation increase the risk of built-up edge. The coating reduces flank wear and supports a stable cutting edge, which in turn lowers the frequency of index changes and helps maintain process uptime. Emphasis is placed on measurable outcomes: fewer interruptions for tool changes and more consistent part quality across production runs. Reliable chip control for safer, faster cycles The IR2.0ISO chipbreaker is designed to produce manageable chips in conditions that typically challenge chip evacuation when machining stainless steel. By promoting short, uniform chip form, the insert reduces the risk of entanglement and tool nose damage, enabling higher feeds where appropriate. The mechanical geometry of the chipbreaker combined with the coated grade delivers a balance between shearing action and edge strength, which supports efficient material removal without sacrificing surface integrity. Practical benefits for workshop and production planning Selecting this insert reduces setup variability: stable cutting performance decreases scrap rates and eases quality control. The insert’s characteristics are particularly valuable for batch production and mixed-series turning where consistent cycle times matter. Because the grade targets stainless steels specifically, process windows are narrower to control heat and strain — the result is improved surface finish and reduced rework. For engineers and production planners, the clear specification of grade, chipbreaker and series simplifies tool selection and integration into existing toolholders. How it supports machining strategy and tool economy Integrating this insert into a cutting tool strategy contributes to cost-efficiency through longer edge life and fewer interventions. The WMP32G grade is optimised for stable chip formation and robust cutting-edge behaviour, which helps protect machine uptime and operator workflow. Where operators shift between different stainless alloys, the insert’s consistent performance assists in maintaining throughput without frequent readjustment. The focus is on efficient metal removal combined with predictable maintenance intervals, supporting continuous production demands. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Walter Tools TS11-IR2.0ISO WMP32G applications and to secure supply tailored to production needs Technical Data SKU: TS11-IR2.0ISO-WMP32G-WALTER Designation: TS11-IR2.0ISO WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Grade: WMP32G Chipbreaker: IR2.0ISO Material group: M Suitable for: stainless steel Special features Coating technology: Tiger·tec Gold (coated carbide) Application focus: medium to robust turning conditions Optimised for stable chip formation and tool life FAQ What materials is this insert suitable for? The insert is specified for machining stainless steel; the WMP32G grade and Tiger·tec Gold coating are developed to handle the toughness and thermal behaviour of these alloys. How does the IR2.0ISO chipbreaker influence performance? The IR2.0ISO chipbreaker promotes short, controlled chips and improved evacuation, reducing entanglement and supporting higher feed rates where the process permits with the TS11-IR2.0ISO WMP32G insert. Can this insert be used for finishing and semi-finishing operations? Yes, the combination of grade and chipbreaker supports both semi-finishing and finishing while maintaining surface integrity on stainless steels when cutting parameters are set within recommended process windows. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands beyond the offering of original, factory-new goods from the indicated manufacturers.
TS11-IR2.0ISO-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steel, ensuring stable chip control and extended tool life; order the insert via Metav Werkzeuge or consult our technical advisers for application support. TS11-IR2.0ISO-F5 WMP32G – Indexable turning insert, Tiger·tec Gold coating by Walter Tools The TS11-IR2.0ISO-F5 WMP32G is an indexable turning insert optimised for medium to robust machining of stainless steel, offering a balance of wear resistance and consistent edge stability. Tiger·tec Gold coating for enhanced wear resistance WMP32G grade optimised for stainless steel machining IR2.0ISO-F5 chipbreaker for reliable chip control Consistent cutting edge and extended tool life Predictable process performance through advanced coating The combination of the Tiger·tec Gold coating and a coated-carbide substrate delivers consistent wear resistance, which translates into stable cutting forces and predictable tool life even under demanding conditions. For production environments where repeatability matters, the coating reduces flank wear and helps maintain dimensional accuracy over multiple indexings. This predictable behaviour supports shorter setup times and fewer in-process interruptions, improving overall productivity in batch and single-point turning applications. Grade tailored for stainless steel with reliable chip formation The WMP32G grade is formulated specifically for machining stainless steel, a group of materials that typically show strong adhesion and thermal sensitivity. The grade promotes secure chip formation and a stable cutting edge, lowering the risk of build-up on the cutting face. For operators processing a range of austenitic or other corrosion-resistant alloys, the insert’s properties minimise unexpected tool changes and produce more consistent surface quality on turned components. Chip control and edge security for productive turning The IR2.0ISO-F5 chipbreaker geometry is designed to guide chips away from the cutting zone and to break swarf into manageable segments, supporting unattended operation and safer chip evacuation. Combined with the coated carbide body, the geometry also reduces the tendency for chatter and improves contact conditions at the tool–workpiece interface. These effects result in fewer reworks, improved cycle-time reliability and a cleaner machining environment on automated lathes or turret turning centres. Practical integration and application guidance This indexable insert fits holders compatible with the TS11 ISO form and is best used at cutting parameters matched to stainless steel processing—moderate speeds with stable feeds to leverage the coating and chipbreaker synergy. The insert’s balanced design reduces the need for frequent tool changes and enables consistent surface finishes on serial production. For unfamiliar setups, trial runs at conservative parameters will confirm process windows and help fine-tune coolant and feed choices for the desired surface integrity. For application advice or to discuss which Walter Tools inserts suit specific stainless steel tasks, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS11-IR2.0ISO-F5-WMP32G-WALTER Product: Indexable turning insert TS11-IR2.0ISO-F5 WMP32G Manufacturer: Walter Tools Core data Grade: WMP32G Series/Coating: Tiger·tec Gold Chipbreaker: IR2.0ISO-F5 Applications / Features Suitable for stainless steel Coating: Tiger·tec Gold Material class: coated carbide ISO designation: TS11-IR2.0ISO-F5 WMP32G FAQ What materials is this insert intended for? The TS11-IR2.0ISO-F5 WMP32G insert is designed primarily for machining stainless steel and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and helps maintain a stable cutting edge, which supports longer intervals between indexings and more consistent component tolerances. Which chipbreaker should be selected for continuous turning? The IR2.0ISO-F5 chipbreaker provided with this insert promotes controlled chip segmentation and reliable evacuation, making it suitable for continuous turning of stainless steel where swarf control is critical. Can the insert be used on automated turning centres? Yes, the insert’s geometry and grade are suited to automated turning centres and turret lathes, where stable chip control and predictable tool life reduce downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory-new article of the manufacturer.
TS11-IR2.0ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the IR2.0ISO‑M5 chipformer for dependable machining of stainless steel; the coated carbide grade WMP32G offers stable cutting edges and predictable tool life. Order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. TS11-IR2.0ISO-M5 WMP32G turning insert — Tiger·tec Gold coated, for stainless steel (Walter Tools) TS11-IR2.0ISO-M5 WMP32G is a precision indexable turning insert designed for demanding stainless steel machining in medium to robust conditions Tiger·tec Gold coating for wear resistance Optimised IR2.0ISO‑M5 chipformer Coated carbide grade WMP32G Suited to rostfreie Stähle machining Stable chip control for improved process reliability The insert combines a dedicated IR2.0ISO‑M5 chipformer with the WMP32G grade to ensure stable chip formation when machining stainless steel. This geometry reduces the risk of built‑up edge and erratic chips, which in turn lowers the frequency of interrupted cuts and unplanned tool changes. The result is a more predictable process, particularly in components where consistent surface quality and repeatability are required. The geometry is especially effective in countering the heat and ductility typical of austenitic stainless steels, delivering clean chip evacuation and safer turning cycles. Longer tool life through advanced coating technology Thanks to the Tiger·tec Gold coating technology and a coated carbide substrate, this insert offers enhanced resistance to abrasive and adhesive wear. The combination limits flank and crater wear under medium to robust cutting conditions, contributing to extended edge life and more stable cutting performance. For production environments where tool‑life consistency matters, the grade supports fewer indexings per workpiece batch and reduces overall tooling costs, while maintaining surface finish and dimensional stability over longer runs. Productivity gains and process security in stainless applications Designed for the ISO M group, the insert is optimised for rostfreie Stähle with a focus on process security and surface integrity. The balanced interplay between the chipformer and coating provides conservative but reliable cutting behaviour, allowing for higher material removal rates with lower risk of tool failure. This predictability is valuable in workflows where downtime is critical: consistent cutting forces and chip flow minimise machine interruptions and simplify process documentation for quality control. Practical selection guidance and application notes Select the TS11‑IR2.0ISO‑M5 WMP32G insert for turning operations that demand robust edge stability and good chip control, from roughing to medium finishing passes in stainless components. When integrating into a toolholder system, align feed and depth of cut with the intended surface finish and cycle time—using the insert’s chipformer to maintain controlled swarf. For mixed production lines handling austenitic grades, the insert supports repeatable performance across batches, reducing setup variability and improving overall output efficiency. For tailored recommendations on using Walter Tools’ TS11‑IR2.0ISO‑M5 WMP32G inserts in specific stainless steel applications, contact Metav Werkzeuge for application support and stock information — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: TS11-IR2.0ISO-M5-WMP32G-WALTER Product type: Turning insert / indexable insert Brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Designation: TS11-IR2.0ISO-M5 Facts Material group: M (stainless steels) Coating technology: Tiger·tec Gold Chipformer: IR2.0ISO‑M5 Special features Coated carbide material Optimised chip control for rostfreie Stähle Suitable for medium to robust cutting conditions Stable cutting edge and predictable wear behaviour FAQ What materials is this insert intended for? The TS11‑IR2.0ISO‑M5 WMP32G insert is intended primarily for machining stainless steels (ISO M group), where ductility and heat sensitivity require specialised chip control and wear resistance. How does the Tiger·tec Gold coating benefit tool life? Tiger·tec Gold coating on the WMP32G grade reduces abrasive and adhesive wear, improving edge stability and contributing to longer, more predictable insert life under medium to robust cutting conditions. Which chipformer is integrated and what is its purpose? The IR2.0ISO‑M5 chipformer is integrated to generate controlled chips during turning; this reduces the risk of built‑up edge and aids in safe chip evacuation when cutting rostfreie Stähle. Is this insert suitable for finishing operations? Yes, the insert supports medium finishing passes where stable edge geometry and consistent surface quality are required; for fine finishing, adjust feed and depth of cut according to the desired surface integrity. How to choose between different grades for stainless steel? Choose WMP32G when the application demands a balance of wear resistance and chip control for medium to more demanding stainless applications; consult tooling data for alternative grades if primarily high‑speed or ultra‑hard materials are involved. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS11-IR2.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steel, with the IR2.5ISO chipbreaker for consistent chip control; order the inserts via Metav Werkzeuge or consult the technical advisers for application-specific guidance. TS11-IR2.5ISO WMP32G – indexable turning insert for stainless steel by Walter Tools TS11-IR2.5ISO WMP32G is an indexable turning insert designed for machining stainless steel, combining Tiger‑tec Gold coating with an IR2.5ISO chipbreaker for robust, repeatable cutting performance Coated carbide grade WMP32G Optimised chip control IR2.5ISO Designed for stainless steel machining Tiger‑tec Gold for stable cutting edges High cutting reliability under challenging conditions The coated carbide WMP32G grade, developed within the Tiger‑tec Gold family, is tailored to the demands of stainless steel where toughness, work‑hardening and heat generation are major challenges. The combination of a wear‑resistant coating and a geometry tuned for adhesive tendencies reduces the risk of build‑up on the cutting edge, which in turn stabilises dimensions and surface finish. For production environments that require predictable life cycles and fewer tool changes, this insert offers a measurable improvement in process stability and tool‑life consistency. Consistent chip control for steady productivity The IR2.5ISO chipbreaker is engineered to produce short, controlled chips in medium to robust cutting conditions, improving swarf evacuation and lowering the chance of entanglement. Stable chip formation reduces heat concentration at the cutting zone and helps maintain a sharper edge for longer, which supports higher average metal removal rates. In practice, the chip geometry contributes directly to reduced downtime and a smoother workflow on automated lathes and multi‑spindle turning centres, where repeatability and reliability are essential. Practical application and machining benefits This insert suits turning tasks where a balance between edge robustness and surface integrity is required. The architecture of the grade supports interrupted cuts and variable feed conditions typical in batch production and repair work. For manufacturers aiming for fewer tool interventions and consistent part quality, the insert enables longer intervals between indexings while preserving workpiece tolerances. Selection of appropriate cutting data and a compatible toolholder will further enhance the insert performance and prolong service life. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools WMP32G inserts for stainless steel machining Technical data Article number: TS11-IR2.5ISO-WMP32G-WALTER Designation: TS11-IR2.5ISO WMP32G Product type: Drehwendeschneidplatte Brand: Walter Tools Facts ISO group: M (rostfreie Stähle) Grade / series: WMP32G, Tiger‑tec Gold Chipbreaker: IR2.5ISO Special features Coated carbide (beschichtetes Hartmetall) Optimised chip control for medium to robust conditions Stable cutting edge for reduced build‑up Suited to interrupted cuts and demanding stainless steel applications FAQ Is this insert suitable for machining stainless steel? The TS11-IR2.5ISO WMP32G insert is designed specifically for stainless steel and supports secure chip formation and reduced build‑up under medium to robust conditions. What does the grade WMP32G indicate? WMP32G is a Walter Tools coated carbide grade within the Tiger‑tec Gold family, optimised for wear resistance and edge stability when machining stainless steel. Which applications benefit most from the IR2.5ISO chipbreaker? IR2.5ISO is recommended for turning operations that require consistent, short chips—typical in medium to robust cutting—where reliable evacuation and stable cutting behaviour are priorities. Can the insert be used for finishing passes? The insert is primarily balanced for robustness and consistent edge life; it can be used for semi‑finishing, while dedicated finishing geometries may be preferable for ultra‑fine surface finishes. What coating technology is applied to this insert? The insert employs the Tiger‑tec Gold coating technology, which enhances wear resistance and supports longer, repeatable tool life in demanding stainless steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
TS11-IR20UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for secure chip control and extended edge life; order through Metav Werkzeuge or consult our specialists for application-specific advice. TS11-IR20UN WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) The TS11-IR20UN WMP32G is an indexable turning insert engineered for machining stainless steel under medium to heavy conditions, combining a coated carbide grade with a dedicated chipbreaker for stable cuts. Tiger·tec Gold coating for enhanced wear resistance Optimised for machining stainless steel (ISO M) Stable chip formation with IR20UN chipbreaker Reliable performance from Walter Tools Longer tool life through advanced coating technology The combination of Tiger‑tec Gold and the WMP32G grade provides noticeably improved wear resistance and thermal stability compared with conventional coatings. This results in a longer effective tool life and fewer insert changes, which directly reduces non-productive time in series production. The coated carbide base offers a consistent cutting edge that tolerates the toughness and high heat generation typical of stainless steel, so component tolerances remain stable over longer tool cycles. Predictable chip control for safer machining Equipped with the IR20UN chipbreaker, the insert supports controlled chip formation during turning of ISO M materials. Stable chips reduce the risk of entanglement, protect the workpiece surface and ease chip evacuation in automated setups. Clear chip formation also simplifies coolant strategies and downstream handling, which improves cycle reliability and lowers scrap rates when processing demanding materials. Process security and repeatability for production use Manufactured to Walter Tools standards, the insert is designed for repeatable edge geometry and consistent seating in standard toolholders. The combination of grade and geometry promotes stable cutting edge behaviour, so process windows are easier to define and maintain. For production environments seeking reduced variability and predictable tool change intervals, this insert supports higher uptime and simplified planning of maintenance intervals. Practical integration and inventory advantages The insert’s specification matches common ISO toolholder systems, allowing straightforward integration into existing tooling banks. Using a dedicated grade for stainless steel minimises the need for multiple general-purpose inserts, streamlining inventory while delivering application-specific performance. Where elevated thermal loads or sticky material behaviour occur, adopting this insert can reduce machining steps and support a smoother production flow. For reliable availability and tailored advice on applying Tiger‑tec Gold technology in your turning processes, contact Metav Werkzeuge for purchasing guidance and setup recommendations: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: TS11-IR20UN-WMP32G-WALTER SKU: TS11-IR20UN-WMP32G-WALTER Product type: indexable turning insert Grade / series: WMP32G — Tiger‑tec Gold Chipbreaker: IR20UN Material group suitability: stainless steel (ISO M) Core specifications No dimensional data provided in the source No thickness or corner radius specified No tolerance class provided Special features Coated carbide grade WMP32G Tiger‑tec Gold coating technology IR20UN chipbreaker for controlled chips Designed for machining stainless steel (ISO M) Brand: Walter Tools FAQ What materials is this insert designed for? The insert is optimised for machining stainless steel (ISO M); the WMP32G grade and chipbreaker promote secure chip formation and edge life when working these materials. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WMP32G grade increases thermal and wear resistance, extending effective tool life and helping to maintain surface quality in demanding stainless steel applications. Which chipbreaker is integrated and what does it do? The integrated IR20UN chipbreaker produces short, controllable chips to reduce entanglement and ease evacuation, improving process reliability during turning. Is the insert suitable for medium to heavy cutting conditions? Yes; the grade and geometry are selected for medium to robust operating conditions typical when machining tough stainless steels, offering stable cutting performance. Can this insert be used with standard toolholders? The insert follows common ISO insert designations and can be mounted in compatible toolholders, enabling straightforward integration into existing tooling setups. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks such as Walter Tools are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the manufacturer.
TS11-IR24UN WMP32G Wendeplatten - Walter Tools
Combining Tiger·tec Gold coating and the WMP32G grade provides reliable wear resistance and secure chip formation for machining stainless steel; this ensures longer tool life and consistent surface quality. Order the TS11-IR24UN WMP32G indexable turning insert directly via Metav Werkzeuge or consult our advisors for application guidance. TS11-IR24UN WMP32G indexable turning insert – Tiger·tec Gold coating for stainless steel (Walter Tools) A TS11-IR24UN WMP32G indexable turning insert designed to deliver stable cutting performance and effective chip control when machining stainless steels under moderate to robust conditions. Tiger·tec Gold coating for robust wear resistance Designed for stainless steel machining WMP32G coated carbide for stable chip control Consistent cutting edge for longer cycles High process reliability when turning stainless steels The Tiger·tec Gold technology combined with the WMP32G grade delivers enhanced wear resistance and improved thermal stability, specifically aimed at materials in ISO group M (stainless steel). The coated carbide composition reduces adhesion and supports stable chip formation, which lowers the risk of built-up edge and surface defects. For production environments, this translates into fewer interruptions, longer cutting intervals and more predictable cycle times, supporting efficient shop-floor planning. Clear improvements in tool life and surface quality A secure, resistant cutting edge and the optimised IR24UN chipbreaker contribute directly to better surface finishes and extended insert life. The coating minimises flank and crater wear under increased temperature loads typical of machining stainless steels, so the insert maintains dimensional accuracy for longer. These characteristics reduce rework and contribute to lower overall machining costs per component, making the solution attractive for both jobbing and small-series production. Practical uses and recommended application window Engineered for moderate to robust cutting conditions, the insert is suitable for a variety of turning operations where stainless steel is dominant. The design supports continuous and interrupted cuts, with a focus on reliable chip evacuation and edge stability. When integrated into a standard holder system and paired with process-relevant parameters, the insert aids consistent productivity and repeatability across batches. For best results, pair the insert with appropriate coolant strategies and stable clamping to exploit the full benefits of the coated microstructure. For reliable stainless steel turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and sourcing: info@metav-werkzeuge.com · +49 2822 7131930. Technical Data SKU: TS11-IR24UN-WMP32G-WALTER Product: Indexable turning insert Designation: TS11-IR24UN WMP32G Series: Tiger·tec Gold Grade: WMP32G Manufacturer: Walter Tools Facts Material group: M (stainless steels) Suitable for: rostfreier Stahl (stainless steel) Chipbreaker: IR24UN ISO designation: TS11-IR24UN WMP32G Special features Coating: Tiger·tec Gold Substrate: coated carbide Application: moderate to robust cutting conditions Benefit: stable chip formation and wear resistance FAQ What materials is this insert intended for? The TS11-IR24UN WMP32G insert is intended for machining stainless steel (ISO group M), providing stable chip control and wear resistance for such materials. What does the Tiger·tec Gold coating deliver in practice? Tiger·tec Gold enhances thermal stability and reduces adhesion, so the WMP32G grade maintains a reliable cutting edge and improves tool life when machining rostfreier Stahl. Which chipbreaker is fitted and what is its advantage? The insert features the IR24UN chipbreaker, which supports consistent chip formation and evacuation under moderate to robust turning conditions. Is this insert suitable for interrupted cuts? Yes, the insert’s coated carbide construction and robust edge geometry make it suitable for interrupted as well as continuous turning operations in stainless steel. How does the WMP32G grade affect productivity? WMP32G combines a wear-resistant coating with a stable substrate to reduce downtime and extend cutting intervals, supporting more consistent productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS11-IR28UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a high-performance cutting grade and optimised chip control for consistent stainless steel turning; secure reliable edge life and process stability in medium to robust conditions. Order the TS11-IR28UN WMP32G indexable turning insert directly via Metav Werkzeuge or consult our specialists for application advice. TS11-IR28UN WMP32G indexable turning insert — Tiger·tec Gold for stainless steel, Walter Tools TS11-IR28UN WMP32G is an indexable turning insert engineered for secure chip formation and stable cutting when machining stainless steels under medium to robust conditions. Tiger·tec Gold coating for extended tool life Optimised IR28UN chipbreaker for stable chips Grade WMP32G suited to stainless steel (ISO M) Walter Tools edge stability and repeatability Longer productive tool life through advanced coating The combination of the Tiger·tec Gold technology with a coated-carbide substrate delivers a measurable improvement in tool life and wear resistance. The applied coating reduces flank wear and helps maintain a stable cutting edge under the thermal and adhesive challenges typical of stainless steel machining. For production environments this translates into fewer index changes, longer uninterrupted cycles and more predictable tool consumption. The visible result is a higher overall equipment effectiveness where end-of-life behaviour is more uniform and maintenance intervals are easier to plan. Reliable chip control and process stability with IR28UN An optimised chipbreaker such as IR28UN is central to consistent swarf formation and evacuation when turning tough, ductile materials. The chip geometry has been developed to support controlled segmentation and to avoid long, stringy chips that hamper throughput and surface finish. Integrating this insert into turning operations reduces the risk of tool-induced interruptions and improves operator safety at the lathe. Clear chip control also helps maintain coolant effectiveness and reduces manual cleaning time around fixtures and workpieces. Grade WMP32G: engineered for stainless steel performance The WMP32G grade is a Walter Tools coated-carbide solution specifically balanced for the demands of ISO group M materials. It supports secure chip formation and a stable cutting edge under moderate to heavy conditions, while also delivering consistent surface quality. For shops that process a broad range of stainless alloys, this grade offers predictable behaviour across typical feeds and depths of cut, allowing process engineers to standardise parameters and reduce trial-and-error optimisation on new batches or workpiece geometries. Practical integration into turning operations Adopting an indexable insert like this one supports quick tool changes and straightforward inventory management in production. The standardised insert designation simplifies toolholder selection and contributes to reproducible set-ups across machines. The insert’s characteristics favour productivity: fewer interruptions for regrinds, reliable surface finishes and consistent cycle times. For engineering teams seeking measurable efficiency gains, the combination of coating, grade and chipbreaker provides a pragmatic route to improved throughput without extensive process retooling. Contact Metav Werkzeuge today to discuss the TS11-IR28UN WMP32G from Walter Tools and to receive tailored recommendations for stainless steel turning applications Technical Data Article number: TS11-IR28UN-WMP32G-WALTER Designation: TS11-IR28UN WMP32G Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Key figures ISO material group: M (stainless steel) Grade: WMP32G Chipbreaker: IR28UN Series: Tiger·tec Gold Special features Coating technology: Tiger·tec Gold Substrate: Coated carbide Application: Stainless steel machining Benefit focus: stable chip formation and edge reliability FAQ What materials is this insert suitable for? The TS11-IR28UN WMP32G insert is specified for stainless steel machining (ISO group M) and performs well in medium to robust cutting conditions. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold offers improved wear resistance and thermal stability; the TS11-IR28UN WMP32G benefits from these properties for longer service life and consistent cutting behaviour. How does the IR28UN chipbreaker affect turning performance? The IR28UN chipbreaker promotes controlled chip segmentation and improved evacuation, reducing the likelihood of chip-related interruptions and improving surface finish. Is this insert compatible with standard toolholders? The insert follows standard indexable insert designation and can be mounted in matching turning toolholders designed for the TS11-IR28UN geometry. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS11-IR32UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the WMP32G grade for dependable stainless‑steel turning with controlled chip formation and extended edge life; order the insert directly via Metav Werkzeuge or consult our specialists for process parameters and holder compatibility. TS11-IR32UN WMP32G indexable turning insert — Tiger‑tec Gold (Walter Tools) The TS11-IR32UN WMP32G is an indexable turning insert designed for machining stainless steel in medium to robust cutting conditions, delivering consistent chip control and wear resistance. Tiger‑tec Gold coating for enhanced wear resistance Designed for stainless steel (ISO M) machining Stable chip formation and robust cutting edge Coated carbide grade for medium to heavy duty turning Reliable performance when machining stainless steel The combination of the Tiger‑tec Gold technology and the WMP32G grade provides a coated carbide solution optimised for the challenges of stainless steel: material toughness, built‑up edge tendency and heat concentration. The insert’s substrate and coating balance hardness and toughness to resist flank wear while maintaining edge stability. This leads to fewer unplanned tool changes and a more predictable machining rhythm, supporting efficient production on high‑mix or batch turning operations. Fewer interruptions through stable chip control and edge life A well‑matched chipbreaker and a robust edge geometry reduce the risk of disruptive chip behaviour in long cuts and interrupted turning. The TS11‑IR32UN WMP32G offers stable chip formation, which lowers the likelihood of built‑up edge and improves surface quality on parts made from austenitic and other stainless grades. The result is a measurable improvement in process reliability and reduced operator intervention during shifts, which supports higher overall equipment effectiveness. Practical fitment and application guidance for series use The insert belongs to the Tiger‑tec Gold family, making it a consistent choice where repeatable results are required across toolsets and batches. As a standard indexable turning plate, it integrates with compatible toolholders that accept the TS11‑IR32UN geometry and benefits from established cutting data for ISO group M applications. For machine setups where coolant strategy, feed and cutting speed must be aligned with component tolerances, consultation with Metav Werkzeuge ensures suitable holder selection and recommended parameters to reach the intended productivity and surface finish targets. About the brand and product origin Walter Tools is a recognised provider of high‑performance turning solutions; the TS11‑IR32UN WMP32G reflects the brand’s focus on stable cutting edges and consistent results in demanding stainless‑steel applications. The article is offered as a factory‑new original from Walter Tools and is intended for professional machining environments seeking reproducible performance. For precision stainless‑steel turning with Tiger‑tec Gold, contact Metav Werkzeuge to discuss the TS11‑IR32UN WMP32G and specify the correct holder and cutting data for a reliable production setup Technical data Article number: TS11-IR32UN-WMP32G-WALTER Designation: TS11-IR32UN WMP32G Type: indexable turning insert Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR32UN Material group: M Facts ISO material group: M (stainless steel) Coating: coated carbide (described as coated hardmetal) Application range: medium to robust cutting conditions Special features Optimised for stable chip formation Robust cutting edge for reduced wear Suitable for austenitic and similar stainless grades Part of the Tiger‑tec Gold product family Original Walter Tools production FAQ Which materials is the insert suitable for? The TS11‑IR32UN WMP32G is specified for stainless steel (ISO group M) and is designed to handle the toughness and heat sensitivity typical of these alloys. What advantages does Tiger‑tec Gold offer? Tiger‑tec Gold combines a tailored coating and substrate to provide improved wear resistance and edge stability, making the WMP32G grade effective in medium to robust stainless‑steel turning. Can the insert be used for interrupted cuts? The robust edge geometry of the TS11‑IR32UN WMP32G supports interrupted and continuous turning where moderate to heavy engagement occurs, helping to maintain process reliability. Is special coolant required when using this insert? Coolant strategy depends on the component and process; the TS11‑IR32UN WMP32G performs under typical coolant conditions for stainless‑steel turning, and Metav Werkzeuge can advise on optimal coolant application and cutting parameters. How is chip control improved with this insert? The combination of the IR32UN chipbreaker and the WMP32G grade promotes stable chip formation, reducing the risk of long, entangling chips and improving surface finish consistency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-EL-A55 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable chip control and extended edge life when machining stainless steel; the robust EL‑A55 chipbreaker further enhances process security. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TS16-EL-A55 WMP32G Walter Tools – indexable turning insert with Tiger·tec Gold coating for stainless steel TS16-EL-A55 WMP32G is an indexable turning insert engineered for medium to robust turning in stainless steel, delivering stable chip formation and consistent edge life Tiger·tec Gold coated carbide grade WMP32G Optimised for stainless steel machining EL‑A55 chipbreaker for secure chip control Robust edge stability for productive turning Increase process reliability when tackling stainless steel The combination of the Tiger·tec Gold coating and the WMP32G coated carbide grade is designed to address the typical challenges of machining stainless steel: adhesion, high temperatures and workpiece toughness. The coating improves thermal resistance and reduces adhesive wear, which supports stable chip formation and reduces the risk of built-up edge. For workshops seeking predictable tool life and fewer interruptions, this insert offers a clear technical advantage by maintaining cutting-edge integrity under demanding conditions. Secure chip control and improved surface consistency The EL‑A55 chipbreaker is tuned for medium to robust cutting conditions, promoting short, manageable chips and consistent evacuation from the cutting zone. This reduces downtime associated with chip-related problems and helps achieve reproducible surface quality in serial production. The insert geometry also supports reliable seatability in standard turning toolholders, so the focus remains on optimising cutting data rather than compensating for unstable chip behaviour. Practical use and handling for workshop efficiency As an indexable turning insert, the component simplifies tool management: multiple edges per insert and straightforward indexation reduce tool-change frequency and machining interruptions. The grade targets stainless steels specifically, so matching coolant strategy and conservative initial cutting parameters will extend service life. Walter Tools’ focus on edge stability and process security ensures the insert performs predictably in component manufacture and job-shop production, making it suitable for applications where repeatability and low scrap rates are priorities. Contact Metav Werkzeuge for application-specific recommendations on the Tiger·tec Gold WMP32G insert and to verify stock availability for immediate production planning. Technical data Article number: TS16-EL-A55-WMP32G-WALTER SKU: TS16-EL-A55-WMP32G-WALTER Manufacturer: Walter Tools Facts Material group: M (stainless steels) Coating technology: Tiger·tec Gold Chipbreaker: EL‑A55 ISO designation: TS16-EL-A55 WMP32G Special features Coated carbide grade WMP32G Optimised for stainless steel Stable chip formation High edge stability Indexable turning insert FAQ What materials is this insert suitable for? The TS16-EL-A55 WMP32G insert is optimised for stainless steels and is specified under material group M for turning applications. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade enhances thermal resistance and wear behaviour, helping the insert maintain cutting-edge stability when machining stainless steels. How does the EL‑A55 chipbreaker influence performance? The EL‑A55 chipbreaker promotes short, controllable chips and consistent evacuation, improving process security and surface consistency during turning operations. Is this insert compatible with standard turning holders? The TS16-EL-A55 WMP32G follows standard ISO designation practices for indexable inserts and is designed for use in compatible turning toolholders that accept TS16-type inserts. Can the insert be indexed to use multiple cutting edges? Yes, as an indexable turning insert the TS16-EL-A55 WMP32G offers multiple edges for indexation, which reduces tool-change frequency and supports efficient workshop operation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL-A60 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from improved process security and stable chip formation thanks to the combination of the Tiger·tec Gold coating and the EL‑A60 chipbreaker; take advantage of the robust WMP32G grade for reliable stainless steel machining and order directly via Metav Werkzeuge or consult our specialists for grade and application matching. TS16-EL-A60 WMP32G indexable turning insert — Tiger·tec Gold, for stainless steel, Walter Tools The TS16-EL-A60 WMP32G is an indexable turning insert designed for secure chip formation and consistent performance when machining stainless steel under medium to robust cutting conditions Tiger·tec Gold coating for wear resistance Optimised EL‑A60 chipbreaker Engineered for stainless steel (M) machining Reliable coated carbide grade WMP32G Increased process reliability through material and coating technology The combination of the Tiger·tec Gold coating with the WMP32G carbide grade delivers higher thermal stability and enhanced edge integrity during demanding turning operations on stainless steel. The applied coating reduces abrasive wear and helps to avoid premature flank wear, which in turn supports longer tool life and fewer tool changes. For production environments aiming to reduce downtime, this results in a measurable improvement in operational efficiency while maintaining predictable tool behaviour under tougher cutting conditions. Consistent chip control for better surface quality and fewer interruptions The EL‑A60 chipbreaker is shaped to promote controlled chip fragmentation with reduced risk of built‑up edge formation when cutting ductile and heat‑sensitive workpieces. Controlled chips minimise the likelihood of surface damage and make chip evacuation more reliable, which supports a more consistent surface finish and less time spent on rework. In practice, stable chip flow also simplifies coolant strategies and workholding, contributing to a smoother, more economical production process. Easy integration and clear application range for process planning This indexable insert is specified for the M material group and is therefore optimised for stainless steel applications according to ISO group M. The clear assignment to the WMP32G grade and the EL‑A60 chipbreaker simplifies grade selection during process planning and reduces the iteration needed to reach stable cutting parameters. For workshops and machining centres seeking reproducible results, the insert offers a technically transparent option that aligns with process‑security objectives and predictable productivity gains. For tailored cutting data, grade recommendations or to request a quotation for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge; our application consultants will advise on the best setup for stainless steel and relevant machining parameters — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: TS16-EL-A60-WMP32G-WALTER Name: TS16-EL-A60 WMP32G Product type: indexable turning insert Brand: Walter Tools Data Grade designation: WMP32G Coating technology: Tiger·tec Gold Chipbreaker: EL‑A60 Material group: M (stainless steels) Special features Coated carbide grade Optimised chip control for stainless steel Designed for medium to robust cutting conditions Suitable for production turning applications FAQ What materials is this insert suitable for? The TS16-EL-A60 WMP32G insert is specified for the M group and is therefore suitable for machining stainless steel with stable chip formation under medium to robust conditions. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WMP32G grade reduces abrasive wear and thermal loading, which extends the insert lifetime and helps maintain cutting edge stability during stainless steel turning. Which chipbreaker should be chosen for ductile stainless steel? The EL‑A60 chipbreaker incorporated in this insert is designed to produce consistent chip fragmentation when machining ductile stainless steels, reducing built‑up edge and improving surface finish. Is this insert suitable for high‑speed turning? The coated WMP32G grade with Tiger·tec Gold supports elevated temperatures and provides improved edge integrity; process validation is recommended for specific high‑speed parameters in stainless steel applications. How to obtain cutting data and grade recommendations? Metav Werkzeuge can provide cutting data and grade selection assistance for the TS16-EL-A60 WMP32G insert; request application support for optimal parameters in stainless steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL-AG60 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WMP32G grade and the EL‑AG60 chipbreaker for stable cutting edges and controlled chip formation in stainless‑steel turning. Order the TS16‑EL‑AG60 WMP32G indexable turning insert directly via Metav Werkzeuge or request technical advice from our consultants. TS16-EL-AG60 WMP32G indexable turning insert – Tiger‑tec Gold, for stainless steel (Walter Tools) The TS16-EL-AG60 WMP32G is a coated indexable turning insert designed for medium to robust stainless‑steel machining, combining Tiger‑tec Gold technology with a dedicated EL‑AG60 chipbreaker for consistent chip control in industrial turning applications. Tiger‑tec Gold coating for extended tool life WMP32G grade optimised for stainless steels EL‑AG60 chipbreaker for reliable chip control Coated carbide for stable cutting edges Increase machining productivity with heat‑resistant coating and grade The combination of Tiger‑tec Gold coating and the WMP32G cutting grade enables higher productivity when machining stainless steel. The advanced coating reduces flank wear at elevated temperatures, while the grade supports stable edge retention under medium to robust cutting conditions. Together these features translate into longer tool life and fewer index changes, which reduces machine downtime and improves process throughput for serial production tasks. Achieve predictable chip formation and improved surface quality The dedicated EL‑AG60 chipbreaker is tuned for the specific behaviour of ISO M materials, promoting short, controllable chips and limiting the tendency for built‑up edge. Predictable chip control reduces the risk of workpiece damage and eases swarf management in the machining area, resulting in a more consistent surface finish and fewer interruptions in the production flow. This geometrical optimisation supports stable cutting conditions even under variable feed rates. Dependable tool solution for industrial turning operations Engineered as a coated carbide indexable insert, the design suits medium to heavy‑duty turning tasks on stainless‑steel components where thermal stability and reliable cutting edges are required. The insert’s specification aligns with ISO material group M and is appropriate for applications demanding repeatable performance and process security. The combination of coating, grade and chipbreaker provides a pragmatic balance between economy and machining reliability. Contact Metav Werkzeuge for expert recommendations on the Walter Tools TS16-EL-AG60 WMP32G insert — e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-EL-AG60-WMP32G-WALTER Article: Drehwendeschneidplatte TS16-EL-AG60 WMP32G Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WMP32G Material group: M (stainless steels) Chipbreaker: EL‑AG60 SKU / UID: TS16-EL-AG60-WMP32G-WALTER Special features Coating technology: Tiger‑tec Gold Coated carbide substrate Optimised for ISO M (rostfreie Stähle) Designed for medium to robust cutting conditions Stable cutting edge and reliable chip control FAQ What materials is this insert suited for? The TS16‑EL‑AG60 WMP32G insert is designed primarily for ISO M materials and is optimised for machining stainless‑steel under medium to robust conditions. How does the EL‑AG60 chipbreaker improve the process? The EL‑AG60 chipbreaker ensures short, controlled chips and reduces the risk of built‑up edge, which helps maintain a consistent surface finish and smoother production runs when turning stainless‑steel. Is the WMP32G grade intended for high temperatures? WMP32G, combined with Tiger‑tec Gold coating, provides enhanced thermal resistance and edge stability, supporting higher cutting speeds and extended tool life in demanding stainless‑steel applications. Can this insert be used in general turning toolholders? The insert is an indexable turning insert compatible with toolholders designed for TS16‑EL‑AG60 geometry; confirmation of seat and clamping compatibility should be made against the specific holder specification. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarked names and brands are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The item offered is original, factory‑new goods of the manufacturer.
TS16-EL-G60 WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating, the WMP32G carbide grade and the EL‑G60 chipbreaker delivers reliable chip control and long edge life for machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our tooling specialists for application-specific recommendations. TS16-EL-G60 WMP32G — Indexable turning insert (Tiger·tec Gold, for rostfreier Stahl) by Walter Tools The TS16-EL-G60 WMP32G is an indexable turning insert engineered for dependable machining of rostfreier Stahl under medium to robust cutting conditions, offering stable chip formation and extended edge life. Tiger·tec Gold coating for extended tool life Optimised chip control for rostfreier Stahl machining Coated carbide grade WMP32G for stable cutting Suited to medium to robust cutting conditions High-performance turning for rostfreier Stahl with predictable results The insert combines the Tiger·tec Gold coating with the WMP32G grade to address the typical challenges of machining rostfreier Stahl, such as high ductility, built‑up edge and heat concentration. The result is improved chip formation, reduced tendency for edge build‑up and a more consistent surface finish. For shops prioritising throughput, the coated carbide technology helps to maintain process stability across longer tool life cycles, reducing regrinds and unscheduled tool changes. Minimise interruptions through stable cutting edge and wear resistance Designed as a coated carbide solution, the insert provides a robust cutting edge that withstands intermittent thermal loads common when working rostfreier Stahl. The wear behaviour of the WMP32G grade supports a stable cutting edge, which translates into fewer tool interventions and a more predictable production rhythm. This stability benefits both single‑pass finishing and multi‑pass turning operations where consistent dimensional control is required. Secure chip control and reliable machining under demanding conditions The EL‑G60 chipbreaker is tailored for secure chip control when machining rostfreie Stähle (ISO group M). By shaping and evacuating chips reliably, the chipbreaker reduces the risk of recutting and surface damage while improving process reliability and machine uptime. The TS16‑EL‑G60 WMP32G insert therefore suits producers seeking repeatable results when switching between medium and robust turning tasks on rostfreier Stahl components. For application support and to discuss how Walter Tools' Tiger·tec Gold inserts can improve rostfreier Stahl machining in your shop, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and fast assistance. Technical data Article number: TS16-EL-G60-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-EL-G60 WMP32G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WMP32G Designation: TS16‑EL‑G60 WMP32G Facts Material group: M (rostfreie Stähle) Chipbreaker: EL‑G60 Coating technology: Tiger·tec Gold (coated carbide) Special features Coated carbide grade for improved wear resistance Optimised chip control for rostfreier Stahl Suitable for medium to robust cutting conditions Designed for stable edge life and reproducible performance FAQ What materials is the TS16‑EL‑G60 WMP32G best suited for? The TS16‑EL‑G60 WMP32G indexable turning insert from Walter Tools is specifically tuned for rostfreier Stahl (ISO group M) and performs reliably in medium to robust turning applications. How does the EL‑G60 chipbreaker affect machining? The EL‑G60 chipbreaker on the TS16‑EL‑G60 WMP32G improves chip control and evacuation, reducing recutting and helping to maintain consistent surface quality when machining rostfreier Stahl. What advantage does Tiger·tec Gold bring to this insert? The Tiger·tec Gold coating on the TS16‑EL‑G60 WMP32G enhances wear resistance and thermal stability, which supports longer tool life and more predictable performance in rostfreie Stahl turning. Is the insert suitable for finishing and semi‑roughing operations? Yes, the geometry and WMP32G grade of the TS16‑EL‑G60 WMP32G make it suitable for both semi‑roughing and finishing on rostfreier Stahl, offering a balance between robustness and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL0.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a high-performance cutting grade and a purpose-designed chipbreaker for reliable machining of rostfreier Stahl; the Tiger·tec Gold coating and WMP32G substrate combine wear resistance with secure chip control. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. TS16-EL0.5ISO WMP32G – Indexable turning insert for rostfreier Stahl (Walter Tools) TS16-EL0.5ISO WMP32G is a coated indexable insert engineered for demanding stainless-steel turning applications, offering stable cutting edges and consistent chip formation Tiger·tec Gold coating for wear resistance Grade WMP32G tailored to rostfreier Stahl EL0.5ISO chipbreaker for controlled chips Coated carbide substrate for robust performance Predictable edge life for stainless‑steel turning The combination of the Tiger·tec Gold coating with the WMP32G welds wear resistance and thermal stability into the cutting edge, which supports longer tool life under medium to robust conditions. For machining rostfreier Stahl, where built‑up edge and high heat are common, this coating technology reduces flank wear and helps maintain consistent dimensional accuracy. The result is fewer interruptions and a more predictable replacement schedule, which contributes directly to improved overall equipment effectiveness. Reliable chip control that reduces interruptions The EL0.5ISO chipbreaker is designed to produce manageable chips when turning tough, ductile materials. By promoting controlled chip segmentation and evacuation, the insert lowers the likelihood of chip entanglement and workpiece damage, improving cycle stability. Better chip control also aids coolant access at the cutting zone, which can reduce thermal load on the cutting edge and support a finer surface finish, leading to less rework and higher first‑pass yields. Seamless integration into standard turning systems As an indexable insert, the component fits common clamping systems without needing bespoke holders, enabling quick retrofitting into existing tool setups. That facilitates fast changeovers and simplifies inventory: one grade that covers a range of rostfreier Stahl tasks reduces the number of specialised inserts required on the shop floor. Clear identification with the ISO designation ensures straightforward tool management and repeatable set‑ups, saving time in both planning and production. Stable performance under medium to robust conditions The substrate and coating combination is tuned for demanding machining scenarios: the coated carbide base provides the mechanical strength to withstand higher cutting forces, while the coating limits abrasive wear. This balance supports consistent edge stability over multiple indexes and reduces variability between batches, enhancing process reliability. For operations prioritising uptime and reproducible results, the insert offers a pragmatic, productivity‑focused solution. For machining rostfreier Stahl with Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and fast supply of the WMP32G grade Technical Data Article number: TS16-EL0.5ISO-WMP32G-WALTER SKU: TS16-EL0.5ISO-WMP32G-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL0.5ISO ISO designation: TS16-EL0.5ISO WMP32G Material group: M (rostfreie Stähle) Core data No measurable technical dimensions provided in the source data Special features Coating: Tiger·tec Gold Substrate: Coated carbide (beschichtetes Hartmetall) Application: rostfreier Stahl (stainless steels) Sort: WMP32G suitable for medium to robust conditions Chip control: EL0.5ISO chipbreaker FAQ Which materials is this insert intended for? The TS16-EL0.5ISO WMP32G insert from Walter Tools is intended specifically for machining rostfreier Stahl and is optimised for the tougher, heat‑sensitive behaviour of these alloys. How does the EL0.5ISO chipbreaker influence production? The EL0.5ISO chipbreaker promotes controlled chip formation and evacuation, which reduces interruptions, protects the workpiece surface and supports steady cycle times when using the WMP32G grade. Is this grade suitable for robust turning conditions? Yes, the WMP32G grade and Tiger·tec Gold coating are designed to withstand medium to robust machining conditions, offering wear resistance and edge stability under elevated thermal loads. Can the insert be used with standard tool holders? The indexable format is compatible with common clamping systems, allowing straightforward integration into existing turning tool assemblies without the need for special fixtures. What are the advantages of the Tiger·tec Gold coating? The Tiger·tec Gold coating enhances thermal protection and reduces abrasive wear, helping to maintain cutting performance and extend effective tool life for stainless‑steel turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The item offered is original, brand‑new merchandise from the manufacturer (Walter Tools).
TS16-EL0.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable chip control and durable edge life in rostfreier Stahl machining; order the indexable turning insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. TS16-EL0.75ISO WMP32G indexable turning insert for rostfreier Stahl, Tiger·tec Gold by Walter Tools The TS16-EL0.75ISO WMP32G is an indexable turning insert optimised for machining rostfreier Stahl in moderate to robust cutting conditions. Tiger·tec Gold coated carbide WMP32G Optimised chip control for rostfreier Stahl Stable cutting edge for robust operations Suitable for moderate to heavy turning Higher process efficiency for rostfreier Stahl components The combination of the Tiger·tec Gold coating and the WMP32G grade delivers consistent machining performance on rostfreier Stahl. The coated carbide substrate reduces built-up edge and supports a controlled thermal response, which helps to maintain cutting parameters and reduces the need for frequent tool changes. For production environments where uptime and predictable cycle times matter, this insert contributes to higher throughput by enabling longer periods between indexings and fewer interruptions for regrinding. Stable edge geometry for improved surface quality A secure cutting edge and an optimised chipbreaker design ensure predictable chip formation and reduced vibration during turning operations. This results in more consistent surface finishes and fewer rejects in serial production. The insert’s geometry, identified by the EL0.75ISO chipbreaker, is tailored to promote small, controllable chips when cutting tough, work‑hardening materials; the outcome is a lower risk of workpiece damage and improved repeatability in finishing passes. Clear application guidance and compatibility Belonging to the Tiger·tec Gold family, the insert is specified for the ISO M material group and is therefore particularly suitable for rostfreier Stahl applications under moderate to robust conditions. As an indexable insert it fits standard toolholders that accept the TS16 form factor and enables fast tool replacement and inventory standardisation. For users seeking to balance tool life and machining speed, the grade WMP32G represents a pragmatic choice between wear resistance and reliable chip control. Contact Metav Werkzeuge to discuss the TS16-EL0.75ISO WMP32G Tiger·tec Gold insert and ensure the best configuration for rostfreier Stahl turning tasks Technical data Article number: TS16-EL0.75ISO-WMP32G-WALTER Product: Indexable turning insert TS16-EL0.75ISO WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Grade designation: WMP32G Chipbreaker: EL0.75ISO Material group: M (rostfreier Stahl) Form designation: TS16-EL0.75ISO WMP32G Special features Coating technology: Tiger·tec Gold (coated carbide) Target application: rostfreier Stahl machining (ISO M) Behaviour: stable chip formation, reduced built-up edge Suitability: moderate to robust cutting conditions FAQ What materials is this insert intended for? The TS16-EL0.75ISO WMP32G by Walter Tools is designed primarily for rostfreier Stahl and aligns with the ISO M material group for stainless steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP32G grade improves thermal stability and wear resistance, supporting stable chip formation and longer edge life in rostfreier Stahl cutting. Which chipbreaker is integrated and what is its effect? The insert features the EL0.75ISO chipbreaker, which promotes controlled chip segmentation and safer evacuation when machining tougher, work‑hardening materials. Can this insert be used in production where changeover time must be minimised? Yes, as an indexable turning insert in the TS16 form, the WMP32G grade allows fast indexing and replacement, supporting reduced downtime and consistent cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL0.8ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, optimised chip control and reliable edge life for efficient stainless steel turning operations; order the insert directly via Metav Werkzeuge or consult our technical team for application support. TS16-EL0.8ISO WMP32G indexable turning insert – Tiger·tec Gold for stainless steel (Walter Tools) TS16-EL0.8ISO WMP32G is an indexable turning insert engineered for robust performance when machining stainless steel in medium to demanding conditions Tiger·tec Gold coating for extended tool life EL0.8ISO chipbreaker for controlled chips Optimised for stainless steel (ISO group M) Consistent edge stability in repetitive production Proven coating technology for longer tool life The Tiger·tec Gold coating combined with the WMP32G grade provides a balance of wear resistance and toughness that supports prolonged cutting performance. This combination reduces flank wear and sustains cutting-edge integrity under the thermal and mechanical loads typical for stainless steel turning. For production environments, the result is fewer insert changes and more predictable machining cycles, which contributes directly to higher productivity and lower tooling downtime. Reliable chip control that stabilises the process The EL0.8ISO chipbreaker is engineered specifically to manage the tough, often gummy chips produced when machining stainless steels. Controlled chip formation prevents entanglement and eases evacuation, reducing the risk of workpiece damage or unexpected interruptions. This targeted chip control enhances operational reliability and helps maintain consistent surface quality, even in interrupted or heavy-duty turning operations. Geometry and material match for repeatable precision As an indexable turning insert, the TS16-EL0.8ISO offers a geometry that supports secure clamping and repeatable seating in toolholders. The WMP32G carbide substrate and coating pairing deliver edge stability, which is critical when tight tolerances must be held over series production. Engineers benefit from predictable wear patterns and repeatable part dimensions, helping to maintain process capability and reduce scrap rates. Practical application guidance and tooling choices For best results with this insert, select a rigid toolholder and moderate cooling strategy tailored to stainless steel to balance heat dissipation and flank wear. The insert’s chipbreaker and coating make it suitable for medium to robust cutting parameters; pairing with appropriate holder geometry improves chip flow and repeatability. If specific cutting data are required for a given alloy or operation, Metav Werkzeuge’s advisory service can provide tailored recommendations to match machine capability and production goals. Contact Metav Werkzeuge for application advice, stock availability or to discuss pairing the TS16-EL0.8ISO WMP32G with the most suitable toolholder; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-EL0.8ISO-WMP32G-WALTER Product type: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Core characteristics ISO designation: TS16-EL0.8ISO WMP32G Chipbreaker: EL0.8ISO Material group suitability: M (stainless steel) Special features Coating technology: Tiger·tec Gold Substrate: coated cemented carbide Application focus: stainless steel machining Brand: Walter Tools FAQ What materials is this insert designed for? The TS16-EL0.8ISO WMP32G insert is designed primarily for stainless steel (ISO group M), offering secure chip control and edge life suitable for tough, work-hardening alloys. How does the EL0.8ISO chipbreaker help in production? The EL0.8ISO chipbreaker produces short, controllable chips when turning stainless steel, reducing chip entanglement and improving evacuation in both automated and manual setups. Can this insert be used for finishing operations? Yes, the combination of the WMP32G grade and the Tiger·tec Gold coating supports stable edge conditions that can be applied to finishing passes, provided cutting parameters and toolholder rigidity are aligned to the task. What distinguishes the Tiger·tec Gold series for this application? Tiger·tec Gold coating enhances wear resistance while maintaining toughness, which together contribute to longer tool life and more consistent results when machining challenging stainless steels. Is the insert compatible with standard toolholders? The insert follows common indexable insert geometries and seats; compatibility depends on the specific holder and pocket design. Metav Werkzeuge can advise on the correct toolholder pairing for the TS16-EL0.8ISO WMP32G. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used for explanatory purposes only. There is no affiliation between our company and the trademark holders. The offered item is an original, factory-new product of the manufacturer.
TS16-EL08UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G grade for stable edge life and secure chip formation when machining rostfreien Stahl; the EL08UN chipbreaker further improves productivity by promoting predictable chips and reducing downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-EL08UN WMP32G indexable insert — Tiger·tec Gold, EL08UN chipbreaker — Walter Tools A TS16-EL08UN WMP32G indexable insert designed for reliable turning of rostfreien Stahl under medium to robust cutting conditions Tiger·tec Gold coating for extended tool life EL08UN chipbreaker for consistent chip control Designed for rostfreien Stahl (ISO group M) Coated carbide grade WMP32G for robust conditions Boosted productivity through advanced coating technology The combination of Tiger·tec Gold coating and a coated carbide substrate delivers higher process stability and longer service intervals, which translates into fewer tool changes and increased machine uptime. The WMP32G grade is engineered for applications with elevated heat and built-up edge tendencies typical of rostfreien Stahl; as a result, tool life is improved and repeatable performance is easier to achieve. This is particularly relevant in batch production and heavy-duty turning where consistent cutting behaviour reduces scrap rates and keeps throughput steady. Predictable chip control for consistent surface finish The EL08UN chipbreaker controls chip formation to prevent long, tangled chips and to support continuous machining cycles. Stable chips reduce the need for manual intervention and help maintain a consistent surface quality on turned components. The insert geometry promotes secure chip evacuation and reduces thermal loading at the cutting zone, which benefits both component tolerances and downstream operations. Clear chip control also simplifies automation integration and contributes to safer machining environments. Clear material suitability and application guidance Classified under ISO group M, this indexable insert is suitable for rostfreien Stahl applications that demand abrasion resistance and edge stability. Its composition as a coated carbide cutting grade supports machining under medium to robust conditions where heat and adhesion are concerns. For customers less familiar with technical codes: ISO group M indicates suitability for stainless steels, and the chipbreaker code EL08UN refers to a geometry optimised for medium-depth turning with controlled chip segmentation. Selecting this insert reduces the risk of built-up edge and enhances dimensional repeatability. Contact Metav Werkzeuge for tailored selection of Walter Tools Tiger·tec Gold inserts and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS16-EL08UN-WMP32G-WALTER Product: Drehwendeschneidplatte / indexable insert Designation: TS16-EL08UN WMP32G Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL08UN Manufacturer: Walter Tools Facts ISO material group: M Material designation: coated carbide Application: rostfreien Stahl Special features Tiger·tec Gold coating EL08UN optimised chipbreaker Coated carbide grade WMP32G Suitable for medium to robust cutting conditions Stable chip formation and edge life FAQ What materials is this insert intended for? The insert is specified for machining rostfreien Stahl and is classified in ISO group M to address the typical challenges of stainless steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and wear behaviour, extending tool life and stabilising the cutting edge. Is the EL08UN chipbreaker suitable for automated turning? Yes, the EL08UN chipbreaker provides predictable chip segmentation and evacuation, making it well suited for automated and continuous turning operations. Can this insert handle heavier depths of cut? The WMP32G grade with its robust coated carbide substrate is designed for medium to robust conditions, offering reliable performance under elevated loads typical in heavier turning operations. Which manufacturer produces this insert? This item is a Walter Tools product, delivered as a factory-new original cutting insert Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL08W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WMP32G grade for assured performance on rostfreier Stahl, delivering stable chip formation and extended edge life; order directly via Metav Werkzeuge or consult our technical team for application advice. TS16-EL08W WMP32G indexable turning insert for rostfreier Stahl — Tiger‑tec Gold by Walter Tools A TS16-EL08W WMP32G indexable insert developed for robust turning of rostfreier Stahl, optimised for stable cutting and secure chip control under medium to heavy machining conditions. Tiger‑tec Gold coating for stable edge life WMP32G grade optimised for rostfreier Stahl EL08W chipbreaker for safe chip control Suitable for medium to heavy turning operations Maximise machining performance on rostfreier Stahl The Tiger‑tec Gold coating combined with the WMP32G grade offers a technical solution tailored to the demands of rostfreie Stähle. The grade supports stable edge retention and reduced tendency to build up material on the cutting edge, which is a common challenge when machining tough, ductile stainless alloys. The insert’s formulation assists in heat resistance and wear control, resulting in fewer tool changes and a more predictable production flow — a rational advantage for batch and continuous turning operations. Secure chip control and consistent surface quality The integrated EL08W chipbreaker is designed to promote controlled chip formation and evacuation, reducing the risk of entanglement and tool overload. This controlled chip behaviour contributes directly to a more consistent surface finish and reduces secondary operations. For workshops aiming to raise first-pass yield, improved chip control translates into measurable time savings and a lower scrap rate, supporting efficiency targets and easing downstream finishing processes. Increase productivity with reliable edge life By combining a high-performance coating with a robust carbide grade, the insert supports longer tool life and repeatable cutting performance. The result is fewer interruptions for tool indexing and lower overall tooling consumption per part — a clear cost-efficiency argument. In practical terms, this means tools remain productive for longer, machine uptime increases and changeover frequency decreases, which collectively enhance throughput and process stability in daily production routines. Practical integration and application guidance The insert is suitable for a range of turning tasks on rostfreier Stahl under medium to robust cutting conditions and is compatible with common tool holders matching the TS16 designation. For customers uncertain about optimal cutting parameters or holder compatibility, detailed advice is available to ensure the component integrates seamlessly into existing workflows. The specification supports shops that prioritise stable cutting, predictable cycle times and reproducible results across repeated batches. Contact Metav Werkzeuge for tailored application recommendations and current availability — Metav Werkzeuge’s consultants are happy to advise on machining strategies and insert selection Technical data SKU: TS16-EL08W-WMP32G-WALTER Article: Drehwendeschneidplatte TS16-EL08W WMP32G Manufacturer: Walter Tools Grade: WMP32G Series: Tiger‑tec Gold Core technical data Material group: M (rostfreie Stähle) Chipbreaker: EL08W ISO designation: TS16-EL08W WMP32G Special features Coating technology: Tiger‑tec Gold Application focus: rostfreier Stahl machining Performance: stable chip formation and extended edge life Use case: medium to heavy turning operations FAQ What materials is this insert designed for? The TS16-EL08W WMP32G insert is specified for machining rostfreier Stahl and is formulated to handle the toughness and heat characteristics of those alloys. How does the Tiger‑tec Gold coating benefit cutting performance? The Tiger‑tec Gold coating enhances wear resistance and heat performance, helping the WMP32G grade maintain a stable cutting edge for longer cutting intervals. What role does the EL08W chipbreaker play? The EL08W chipbreaker promotes consistent chip formation and evacuation, which reduces the risk of chip build-up and improves surface quality during turning operations. Is this insert suitable for continuous production runs? Yes, the combination of grade and coating is aimed at productive turning where longer tool life and repeatable performance are priorities. Which brand manufactures this insert? This insert is produced by Walter Tools and is part of their Tiger‑tec Gold family, designed for demanding rostfreie Stahl applications. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL1.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of rostfreier Stahl; the EL1.0ISO chipbreaker ensures stable chip formation and consistent surface quality. Order the TS16-EL1.0ISO WMP32G turning insert via Metav Werkzeuge or consult our specialists for cutting-data recommendations and application support. TS16-EL1.0ISO WMP32G indexable turning insert – Tiger‑tec Gold coating, for rostfreier Stahl | Walter Tools TS16-EL1.0ISO WMP32G is an indexable turning insert engineered for dependable turning of rostfreier Stahl in medium to robust cutting conditions, offering a balance of wear resistance and secure chip control. Tiger‑tec Gold coating for extended tool life WMP32G grade optimised for rostfreie Stähle EL1.0ISO chipbreaker for stable chip control Reliable performance in medium to robust cuts Stable chip control for consistent productivity The TS16-EL1.0ISO WMP32G insert combines a dedicated EL1.0ISO chipbreaker with the WMP32G coated-carbide grade to promote stable chip formation when machining rostfreier Stahl. The chipbreaker geometry directs chips away from the cutting edge, which reduces the risk of built‑up edge and supports a steady material flow. For production environments this means fewer interruptions, improved process security and a more predictable surface finish under varying cutting loads. Coating technology that extends tool life and process reliability Equipped with Tiger‑tec Gold, the insert benefits from a modern coating technology that enhances thermal resistance and wear protection. The coated carbide substrate, together with the coating, resists abrasive and adhesive wear typical for rostfreie Stähle, which in turn improves edge stability and extends tool life. This combination is designed to deliver repeatable performance and consistent results across short and longer runs, supporting higher productivity while maintaining component quality. Application advantages and practical machining guidance Designed for medium to robust applications, this insert is suited to demanding turning operations in rostfreier Stahl where secure chip control and edge life are priorities. The grade supports a wide temperature range and is tolerant of conditions that commonly induce toughness and work‑hardening in the workpiece. When selecting cutting parameters, prioritise stable feeds and appropriate coolant strategies to exploit the insert’s chip control and coating benefits; this approach helps to safeguard surface integrity and reduces the frequency of insert changes. Request tailored cutting data and availability for Walter Tools’ TS16-EL1.0ISO WMP32G from Metav Werkzeuge; contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and rapid supply Technical data Article number: TS16-EL1.0ISO-WMP32G-WALTER SKU: TS16-EL1.0ISO-WMP32G-WALTER Product type: indexable turning insert Designation: TS16-EL1.0ISO WMP32G Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: EL1.0ISO Material group: M (rostfreie Stähle) Facts No dimensioned specifications provided in the data No tolerance class specified No corner radius or thickness values provided Special features Coating: Tiger‑tec Gold (coated carbide technology) Targeted application: rostfreie Stähle Sort description: WMP32G is a coated‑carbide grade for medium to robust cutting Process focus: stable chip formation and reliable cutting‑edge behaviour FAQ Which materials is this insert suitable for? The TS16-EL1.0ISO WMP32G insert is designed primarily for rostfreie Stähle and performs well where toughness, work hardening and heat generation are typical concerns. What advantage does the EL1.0ISO chipbreaker provide? The EL1.0ISO chipbreaker promotes controlled chip formation and evacuation, reducing built‑up edge and improving process stability when machining rostfreie Stähle. How does Tiger‑tec Gold improve performance? Tiger‑tec Gold coating increases thermal and wear resistance of the insert, supporting longer tool life and consistent cutting‑edge stability under demanding conditions. For which cutting conditions is the WMP32G grade intended? WMP32G is specified for medium to robust cutting conditions in rostfreie Stähle, offering a balance between wear resistance and toughness tolerance. Will this insert help with surface finish and repeatability? Yes, the combination of the WMP32G grade, Tiger‑tec Gold coating and the EL1.0ISO chipbreaker is aimed at delivering repeatable surface quality and dependable process results. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands named; the offered item is an original, factory‑new product of the manufacturer.
TS16-EL1.25ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G grade and the EL1.25ISO chipbreaker for secure chip control and consistent edge life; order directly via Metav Werkzeuge or consult our specialists for application advice. TS16-EL1.25ISO WMP32G turning insert — for rostfreier Stahl (Walter Tools) A TS16-EL1.25ISO WMP32G is a coated turning insert engineered for medium to robust machining of rostfreier Stahl, offering optimised chip formation and reliable cutting-edge stability for production environments Tiger‑tec Gold coating for high process reliability Optimised chip control with EL1.25ISO chipbreaker Grade WMP32G for rostfreier Stahl applications Designed for medium to robust machining conditions Higher throughput through optimised cutting performance The combination of the Tiger‑tec Gold series and the WMP32G grade provides a balance between wear resistance and edge toughness that supports continuous production. The integrated EL1.25ISO chipbreaker promotes controlled chip formation, which reduces interruptions from poor chip evacuation and lowers the risk of built-up edge. These characteristics translate into improved cycle times and fewer unscheduled tool changes, helping to maintain a steady production flow without compromising surface quality. Process security and predictable tool life Coated on a coated cemented carbide substrate, the insert delivers consistent cutting behaviour under varying conditions commonly encountered when machining rostfreier Stahl. The coating technology enhances thermal stability and abrasion resistance while the substrate retains edge strength for interrupted or heavier cuts. The result is stable cutting edge performance and repeatable machining results, which supports reliable part tolerances and reduces rework in serial production. Application fit and practical handling in the workshop Specified for ISO group M, this cutting grade is suited to rostfreier Stahl where material ductility and heat generation demand an optimised edge and chip control. The insert is intended for turning operations where medium to robust engagement is required; it is compatible with common indexable turning toolholders matching the TS16 form. For specific process parameters and holder choices, the manufacturer's documentation and Metav Werkzeuge advisers can supply practical recommendations tailored to the machining task. For machining rostfreier Stahl with dependable edge stability, request the Walter Tools Tiger‑tec Gold grade via Metav Werkzeuge or contact our specialists at Metav Werkzeuge for detailed application guidance. Technical data Article number: TS16-EL1.25ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-EL1.25ISO WMP32G Walter Tools SKU: TS16-EL1.25ISO-WMP32G-WALTER Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: EL1.25ISO Material group: M (rostfreie Stähle) Special features Coated cemented carbide (coating technology: Tiger·tec Gold) Optimised chip control for medium to robust conditions Suitable for rostfreier Stahl (ISO group M) FAQ What materials is this insert suited for? The TS16-EL1.25ISO WMP32G insert is designed primarily for rostfreier Stahl and conforms to ISO group M applications. What benefits does the Tiger‑tec Gold technology provide? Tiger‑tec Gold coating on the WMP32G grade improves thermal resistance and wear behaviour, resulting in more consistent performance during turning of rostfreier Stahl. How does the EL1.25ISO chipbreaker affect machining? The EL1.25ISO chipbreaker on this Walter Tools insert enhances chip control and evacuation, reducing interruptions and improving process reliability. Is the insert suitable for heavy interrupted cuts? The graded construction and coating of this insert support medium to robust machining conditions and provide a stable cutting edge for demanding turning tasks. How to identify the correct application group for this insert? The WMP32G grade is specified for ISO group M; this indicates suitability for rostfreier Stahl and similar materials requiring secure chip formation Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-EL1.5ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold performance and the WMP22G coated‑carbide grade for reliable machining of rostfreier Stahl; the result is a stable cutting edge and consistent chip control that reduce interruptions and improve throughput. Order via Metav Werkzeuge or contact their technical consultants for cutting data and application advice. TS16-EL1.5ISO WMP22G — indexable turning insert, Tiger‑tec Gold coating, for rostfreier Stahl (Walter Tools) TS16-EL1.5ISO WMP22G is an indexable turning insert engineered for secure, repeatable performance when machining rostfreier Stahl under medium to robust cutting conditions Tiger‑tec Gold coating for extended tool life Optimised chipformer for stable chip control Suited for rostfreier Stahl machining (ISO M) Coated carbide grade WMP22G for robust cuts Consistent edge stability for demanding rostfreier Stahl machining The WMP22G grade, combined with the Tiger‑tec Gold coating, delivers a balance between wear resistance and toughness that supports secure cutting of rostfreier Stahl. The plate’s coated carbide substrate resists thermal and mechanical wear while the geometry minimises built‑up edge; this leads to more predictable tool life and fewer unscheduled tool changes. For customers unfamiliar with the chemistry of cutting‑edge grades: the coating reduces friction and heat at the cutting zone, while the substrate provides the core strength required for interrupted or heavy cuts. Improved productivity through controlled chip formation and repeatable results The EL1.5ISO chipbreaker is optimised for chip control in sticky, work‑hardening alloys typical of rostfreier Stahl, which reduces the risk of surface damage and machine downtime. Stable chip control simplifies chip evacuation and tool‑holder management, enabling longer uninterrupted cycles and consistent component quality. Shops focused on throughput will benefit from the predictable wear behaviour of this grade, which translates into lower cost per part and a more efficient production rhythm without compromising surface finish. Practical selection and application guidance for integration into existing processes As an indexable turning insert, TS16‑EL1.5ISO WMP22G suits conventional toolholders and is straightforward to index when one edge shows wear. The plate’s designation indicates the chipbreaker and geometry; selection should align with spindle speed, feed and depth of cut recommended for rostfreier Stahl. For specific cutting parameters and tool‑holder compatibility, Metav Werkzeuge’s technical consultants can provide tailored data, application notes and starting values to integrate this insert into a production schedule with minimal trial time. Contact Metav Werkzeuge for tailored cutting data and to secure TS16-EL1.5ISO WMP22G for rostfreier Stahl applications — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: TS16-EL1.5ISO-WMP22G-WALTER Name: TS16-EL1.5ISO WMP22G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Grade: WMP22G Series: Tiger‑tec Gold Chipbreaker: EL1.5ISO Material group: M Suitable for: rostfreier Stahl (ISO M) Special features Coated carbide grade Optimised chipformer for secure chip control Designed for medium to robust cutting conditions Stable cutting edge and reliable wear resistance FAQ What materials is this insert intended for? The TS16-EL1.5ISO WMP22G insert is intended primarily for rostfreier Stahl and is classified for ISO material group M. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WMP22G grade reduces friction and thermal impact at the cutting zone, contributing to longer tool life and improved surface consistency when machining rostfreier Stahl. Which chipbreaker is integrated and what does it do? The EL1.5ISO chipbreaker is integrated into this insert to promote stable chip formation and easier evacuation during turning operations in sticky or work‑hardening materials. How should the insert be indexed and inspected in production? Index the plate to a fresh cutting edge once wear is evident; inspect for build‑up, flank wear or chipping and replace or reindex to maintain part quality when limits are reached. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is part of the Sandvik group and counts among the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered article is original, factory‑new merchandise of the listed manufacturer.
TS16-EL1.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, weld-resistant performance and proven Tiger·tec Gold coating for consistent productivity in stainless steel turning; order the insert directly via Metav Werkzeuge or consult their technical team for application advice. TS16-EL1.5ISO WMP32G — Turning indexable insert, Tiger·tec Gold, for stainless steel (Walter Tools) A TS16-EL1.5ISO WMP32G turning indexable insert designed for machining stainless steels under medium to robust cutting conditions, delivering stable chip control and prolonged tool life. Tiger·tec Gold coating for extended tool life Optimised for stainless steel machining EL1.5ISO breaker ensures stable chip formation Reliable WMP32G grade for robust conditions Secure chip control for uninterrupted production The combination of the EL1.5ISO chipbreaker and the WMP32G grade provides stable chip formation, reducing the risk of built-up edge and tool chatter when machining stainless steels. The chip geometry was developed to produce short, controllable chips in difficult-to-cut materials, which simplifies chip evacuation and minimises unplanned stops. This focused design supports a smoother process flow and fewer interruptions on the machine, translating into measurable productivity gains. Coating and substrate tuned for high temperatures and adhesion Belonging to the Tiger·tec Gold series, the insert is a coated carbide that combines a thermally resistant surface treatment with a robust substrate to withstand the adhesive tendencies of austenitic stainless steels. The coating reduces friction at the cutting edge and improves resistance to heat and abrasion, which results in a longer tool life and more consistent dimensional results over longer tool cycles. For applications where surface quality and repeatability matter, this insert helps maintain machining parameters for longer periods. Practical integration and predictable performance This grade is targeted at production environments that demand repeatable results under varying loads; the WMP32G specification is optimised for medium to robust conditions and supports routine operational planning. The insert’s geometry and material pairing ease process development: once cutting parameters are set, the operator can expect predictable wear behaviour and consistent finishes. For workshops aiming to improve throughput while keeping process reliability high, this turning insert is a pragmatic choice. If there are questions about compatibility with specific stainless steel grades or recommended cutting data, Metav Werkzeuge’s technical team is available to assist with application data and recommendations. For reliable machining with Walter Tools’ Tiger·tec Gold WMP32G insert, contact Metav Werkzeuge for availability and tailored technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: TS16-EL1.5ISO-WMP32G-WALTER Name: TS16-EL1.5ISO WMP32G turning indexable insert (Walter Tools) Grade: WMP32G Facts Material group: M (stainless steels) Chipbreaker: EL1.5ISO Series: Tiger·tec Gold Special features Coated carbide (coated cemented carbide) Optimised for austenitic and corrosion-resistant steels Designed for medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is the insert suitable for? The insert is specified for machining stainless steels (material group M) and is optimised for applications with medium to robust cutting conditions. How does the EL1.5ISO chipbreaker affect machining? The EL1.5ISO chipbreaker produces short, controllable chips and supports secure chip evacuation, reducing downtime caused by chip entanglement. What benefits does the Tiger·tec Gold series provide? The Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and wear behaviour, leading to extended tool life and stable process performance. Is this insert suitable for finishing operations? The insert is designed for robust and medium-duty turning where predictable performance is required; surface finish depends on chosen cutting parameters and machine setup. Where can cutting data and application advice be obtained? Application-specific cutting data and recommendations are available from Metav Werkzeuge; their team can advise on feeds, speeds and toolholder selection. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com