TS16-EL1.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and suitability for stainless steels to maintain steady production rates and reduced rework. Order the insert or consult Metav Werkzeuge for application advice and insertion recommendations tailored to turning operations. TS16-EL1.75ISO WMP32G indexable turning insert by Walter Tools — for stainless steels The TS16-EL1.75ISO WMP32G is an indexable turning insert designed for medium to robust machining of stainless steels, offering Tiger·tec Gold wear resistance and a dedicated chipbreaker for stable chip formation Tiger·tec Gold coating for extended tool life Optimised for stainless steels (ISO group M) Stable chip formation under robust conditions Reliable edge stability and repeatable performance Maximise process stability through predictable wear behaviour The insert is a coated carbide grade from the Tiger·tec Gold family and combines a wear-resistant coating with a substrate tuned for stainless steels. This composition supports a stable cutting edge, which reduces edge chipping and minimises unscheduled tool changes. For manufacturing contexts where material toughness and heat generation in turning raise the risk of built-up edge, the combination of substrate and coating gives a measurable advantage in maintaining dimensional consistency over longer component runs. The specified chipbreaker EL1.75ISO assists in managing long, stringy chips typical of austenitic stainless grades, converting unpredictable swarf into shorter, controllable fragments. Improved productivity with engineered chip control and repeatable results A primary economic benefit is the insert's capacity to enable longer uninterrupted cycles. The chip geometry and coating interplay to support consistent chip control, which reduces machine downtime for chip clearing and improves surface quality by avoiding re-cutting of deformed material. In practice, this means fewer operator interventions and a more predictable tool-life profile, translating into improved output per shift. The product’s WMP32G grade is targeted at balancing wear resistance and toughness, making it suitable for both steady-state finishing and more demanding turning passes where material stickiness would otherwise degrade the tool quickly. Practical advantages for shop-floor implementation and tool selection Adopting this insert simplifies tooling decisions when machining a range of stainless steels under medium to heavy conditions. The geometrical and coating choices lower the risk of common failure modes in such materials—notably built-up edge and accelerated flank wear—so setups can be standardised across similar jobs. Where process reliability is essential, the insert’s predictable behaviour supports a reduction in inspection overhead and rework. Technical staff with limited carbide-coating experience will find the functional design self-explanatory: Tiger·tec Gold denotes a premium coated solution while the EL1.75ISO chipbreaker indicates a profile optimised for swarf control in ISO group M applications. Contact Metav Werkzeuge to discuss Walter Tools turning solutions, request technical cutting data for your stainless steel grades or arrange sample testing with detailed machining parameters via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TS16-EL1.75ISO-WMP32G-WALTER Designation: TS16-EL1.75ISO WMP32G Grade: WMP32G Facts Material group: M (stainless steels) Chipbreaker designation: EL1.75ISO Special features Series: Tiger·tec Gold Coating: Tiger·tec Gold (coated carbide) Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The TS16-EL1.75ISO WMP32G is intended for stainless steels (ISO group M) and performs well under medium to robust turning conditions where toughness and heat build-up are factors. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and helps maintain a stable cutting edge on tough stainless grades, delaying flank wear and reducing the risk of built-up edge. How does the EL1.75ISO chipbreaker affect machining? The EL1.75ISO chipbreaker promotes controlled, short chip formation in stainless steels, lowering the likelihood of chip entanglement and easing swarf evacuation during turning operations. Is this a versatile grade for different turning tasks? Yes, the WMP32G grade offers a balance of toughness and hardness, making the insert suitable for both steady finishing and more demanding material-removal passes on stainless steels. Can the insert reduce process interruptions? Due to the combined effects of the coated carbide substrate and the chipbreaker, the insert supports fewer unscheduled stops for tool changes and chip clearing, contributing to steadier production cycles. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; no affiliation or endorsement by the named brands is implied. The offered article is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-EL10UN WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G coated carbide grade and the EL10UN chipbreaker for stable chip formation and prolonged edge life; order genuine inserts via Metav Werkzeuge or consult our specialists for tailored recommendations. TS16-EL10UN WMP32G — Indexable insert for rostfreier Stahl (Walter Tools) TS16-EL10UN WMP32G is an indexable cutting insert designed for turning applications in rostfreier Stahl, combining a Tiger·tec Gold coating and a dedicated chipbreaker for process-stable machining. Tiger·tec Gold coating for robust edges WMP32G grade optimised for rostfreier Stahl EL10UN chipbreaker for stable chip control High edge stability in demanding conditions Consistent performance for rostfreier Stahl machining The insert is engineered to give reliable cutting performance when machining rostfreier Stahl, a group of alloys that typically demand careful heat and chip management. The combination of a modern coating and a matched carbide grade supports stable chip formation and reduces the risk of build-up on the cutting edge, which translates into fewer interruptions and more predictable cycle times. For production environments seeking higher uptime, this plate offers a balanced solution between edge life and surface finish. Coating and grade: why Tiger·tec Gold and WMP32G matter The Tiger·tec Gold surface layer in concert with the WMP32G grade provides improved resistance to adhesion and thermal softening compared with conventional grades. In practice, this means the cutting edge retains its geometry for longer under the rubbing and heat common in rostfreier Stahl turning, helping to maintain part tolerances and reduce rework. The substrate and coating synergy is geared towards coated carbide performance where moderate to robust cutting conditions are expected. Chip control and machining security with EL10UN The EL10UN chipbreaker is shaped to encourage short, controllable chips when turning ductile, heat-prone materials. Controlled chip formation reduces the chance of entanglement, lowers the thermal load on the cutting edge and supports repeatable tool life across batches. In automated or lights-out production the improved chip behaviour contributes directly to process security and operator safety, while also simplifying chip evacuation from the machining area. Practical handling and toolroom integration As an indexable insert, this plate fits standard toolholders compatible with its geometry and can be rotated to expose fresh cutting edges, extending usable life without full tool replacement. For best results, match holder rigidity and clamping practice to the application and monitor cutting-record trends to optimise replacement intervals. For customers requiring cutting-data suggestions, Metav Werkzeuge can provide application-specific guidance to help adapt feeds and speeds and to integrate the insert into existing machining cycles. Contact Metav Werkzeuge for application support and to order original Walter Tools TS16-EL10UN WMP32G inserts directly from our distribution team Technical Data Article number: TS16-EL10UN-WMP32G-WALTER Product type: Indexable insert (Drehwendeschneidplatte) Designation: TS16-EL10UN WMP32G Grade/Sort: WMP32G Series/coating technology: Tiger·tec Gold Chipbreaker: EL10UN Suitable for: rostfreier Stahl Manufacturer: Walter Tools Facts ISO material group: M Coated carbide grade: WMP32G Series identification: Tiger·tec Gold Chipbreaker designation: EL10UN Special features Coated carbide substrate Optimised for rostfreier Stahl applications Designed for stable chip control and edge stability Walter Tools brand quality FAQ What materials is the insert suitable for? The TS16-EL10UN WMP32G is optimised for rostfreier Stahl (ISO group M) and is designed to manage the adhesion and heat characteristics typical of these alloys. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade enhances resistance to thermal softening and adhesion, helping the cutting edge maintain geometry and extending effective tool life. What is the purpose of the EL10UN chipbreaker? The EL10UN chipbreaker promotes short, controllable chips when turning ductile, heat-prone materials, improving process security and simplifying chip handling. Can this insert be used in automated production? Yes, the combination of coating, grade and chip control makes the insert suitable for automated or lights-out machining where predictable chip behaviour and edge life are required. Die Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
TS16-EL11UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steel; the EL11UN chipbreaker ensures stable chip formation and consistent tool life. Order directly via Metav Werkzeuge or consult the team for application advice. TS16-EL11UN WMP32G indexable turning insert — Tiger‑tec Gold, EL11UN chipbreaker, Walter Tools A TS16-EL11UN WMP32G indexable turning insert designed for secure, productive machining of stainless steel in medium to robust cutting conditions. Tiger‑tec Gold coating for enhanced wear resistance WMP32G grade optimised for stainless steel machining EL11UN chipbreaker for controlled chip formation Walter Tools precision for consistent process stability Longer tool life through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WMP32G grade provides a demonstrable advantage in wear protection and edge stability when machining stainless steel. The coating reduces adhesive wear and limits crater formation at elevated temperatures, which in turn extends the maintenance intervals and reduces unplanned tool changes. For production environments where downtime impacts throughput, the improved tool life translates directly into higher machine utilisation and lower cost per component. Predictable chip control and process security Equipped with the EL11UN chipbreaker, the insert promotes consistent chip formation even under interrupted cuts or when cutting tougher stainless alloys. Controlled chips reduce the risk of rework, machine stoppages and component damage. The insert’s geometry supports stable cutting forces, which helps maintain surface finish quality and dimensional accuracy. This reliability is particularly valuable for batch production and components requiring repeatable results. Practical advantages for workshop integration The indexable design simplifies inventory management and reduces tooling complexity: inserts are replaced rather than re-ground, and the WMP32G grade covers a broad range of stainless steel applications, minimising the need for multiple grades. For engineers less familiar with carbide technology, the grade is a coated carbide specifically tuned to handle the toughness and heat sensitivity of stainless materials — meaning safer chip behaviour and fewer edge failures during typical turning operations. Why choose this solution for demanding turning tasks The insert is engineered to deliver process stability and consistent surface integrity. In real-world use, these attributes support faster cycle times and predictable outcomes, which are decisive for productive machining lines. Walter Tools’ development focus on stable cutting edges and reliable coatings means that the insert is a pragmatic choice where reproducible results and reduced secondary operations are priorities. For tailored selection and to optimise stainless steel turning with the TS16-EL11UN WMP32G from Walter Tools, contact Metav Werkzeuge for application-focused advice — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-EL11UN-WMP32G-WALTER Designation: TS16-EL11UN WMP32G Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: EL11UN Material group: M (stainless steels) Product type: indexable turning insert Facts Suitable for stainless steel machining Coating technology: Tiger‑tec Gold Application range: medium to robust cutting conditions Special features Coated carbide grade Optimised chip control geometry Walter Tools brand quality FAQ What materials is this insert intended for? The insert is designed for machining stainless steel; the WMP32G grade and Tiger‑tec Gold coating support secure chip formation and wear resistance in these alloys. How does the EL11UN chipbreaker affect performance? The EL11UN chipbreaker promotes consistent, controllable chips, improving process security and reducing the chance of chip-related interruptions during turning. Is this insert suitable for heavy interrupted cuts? The combination of the coated carbide grade and chipbreaker geometry provides robustness for medium to robust conditions; however, specific cutting parameters should be validated for heavy interruptions. How does Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, which leads to longer edge life and fewer insert changes during production runs. Can this insert reduce rework and improve surface finish? Yes. Stable cutting forces and the EL11UN chip control contribute to consistent surface quality and reduce the likelihood of rework caused by poor chip evacuation or edge failure. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), with headquarters in Tübingen, is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation or partnership implied between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory‑new product of the manufacturer.
TS16-EL11W WMP32G WMP32G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the WMP32G grade and the EL11W chipbreaker for consistent, robust machining of stainless steel; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TS16-EL11W WMP32G turning indexable insert — Tiger·tec Gold for stainless steel (Walter Tools) TS16-EL11W WMP32G is an indexable turning insert designed for machining stainless steel under medium to robust cutting conditions with Tiger·tec Gold performance and EL11W chip control Tiger·tec Gold grade WMP32G Optimised for stainless steel applications EL11W chipbreaker for secure chip control Suitable for medium to robust cutting conditions Reliable edge life and process stability for stainless steel The Tiger·tec Gold WMP32G grade delivers a balanced combination of wear resistance and toughness specifically developed for stainless steel. The coating technology reduces adhesive wear and supports a stable cutting edge, which in turn lowers the frequency of tool changes and helps maintain consistent component tolerances. The integrated EL11W chipbreaker promotes controlled chip formation even in materials prone to built-up edge and high heat generation, so machining cycles run with fewer interruptions and predictable surface finishes. Efficient machining and practical handling in turning operations As an indexable turning insert, this design simplifies tool management on shop floors: a worn edge can be rotated or replaced quickly, reducing machine downtime and keeping setup times short. The insert’s geometry and chipbreaker are tuned for secure chip evacuation during medium to robust cuts, improving cycle times and reducing the risk of workpiece damage. The solution is suitable for production environments that demand repeatable performance and efficient material removal while retaining a focus on surface quality. Application guidance and integration into production workflows Selection of suitable cutting data depends on machine rigidity, coolant use and workpiece condition; however, the combination of grade, coating and chipbreaker in this insert supports higher process security when facing the typical challenges of stainless steel turning. For integration into existing tool systems, the insert mates with standard toolholders for the TS16 designation and supports straightforward tooling logistics. For tailored recommendations on cutting parameters and toolholder matching, the technical consultants at Metav Werkzeuge provide practical advice and machining know-how to optimise productivity. Discuss machining requirements and specify the TS16-EL11W WMP32G insert with Metav Werkzeuge for process-optimised use of Tiger·tec Gold technology — contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange application support Technical Data Article number: TS16-EL11W-WMP32G-WALTER Designation: TS16-EL11W WMP32G Product type: Drehwendeschneidplatte / turning indexable insert Manufacturer: Walter Tools Facts Material code: M Compatible with stainless steel: yes Special features Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: EL11W Base designation: TS16-EL11W Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16-EL11W WMP32G insert is formulated for machining stainless steel, offering secure chip formation and stable cutting performance in medium to robust conditions. What is the function of the EL11W chipbreaker? The EL11W chipbreaker on the TS16-EL11W WMP32G promotes controlled chip segmentation and evacuation, reducing the risk of built-up edge and improving surface consistency when turning stainless steel. Can this insert be used in automated production environments? Yes, the indexable design and Tiger·tec Gold grade support repeatable tool changes and stable edge life, making the insert suitable for production workflows with regular indexing or replacement cycles. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold improves wear resistance and reduces adhesion on the cutting edge, which enhances process security and helps maintain component tolerances during stainless steel turning. Is toolholder compatibility standard for TS16 types? The TS16 designation corresponds to common turning insert interfaces; the TS16-EL11W WMP32G insert is compatible with standard toolholders designed for TS16-profile inserts Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and no affiliation is implied. The offered item is an original, factory-new product of the manufacturer.
TS16-EL12UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating, a WMP32G carbide grade and the EL12UN chipbreaker for consistent machining of stainless steels; these features reduce downtime and support stable chip formation. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16-EL12UN WMP32G Indexable turning insert – Tiger·tec Gold coating, for stainless steel (Walter Tools) A TS16-EL12UN WMP32G indexable insert designed for machining stainless steels under medium to robust cutting conditions, offering a coated carbide grade tuned for secure chip control and repeatable performance Tiger‑tec Gold coating for robust cutting Optimised for stainless steel (ISO M) EL12UN chipbreaker for stable chips Coated carbide grade WMP32G for longevity Reliable performance for demanding stainless-steel turning The combination of the Tiger·tec Gold coating and the WMP32G carbide substrate delivers a balance between wear resistance and toughness that is particularly valuable when turning stainless steel. The coating technology reduces built-up edge and extends cutting-edge life, while the grade’s microstructure supports consistent rake and flank wear progression. For production environments where component uniformity and tool-change intervals matter, this insert helps maintain cycle times and reduces unplanned interventions, enabling more predictable process planning and efficient material removal rates. Practical machining benefits and clearer process decisions Equipped with the EL12UN chipbreaker, the insert promotes controlled chip formation, which simplifies swarf handling and decreases the risk of surface damage on finished components. The chip geometry is developed for medium to robust cutting parameters typical of ISO group M materials; this reduces the need for frequent rework and supports stable coolant performance. When selecting tooling for batch production or repair work on corrosion‑resistant alloys, choosing an insert with matched chip control and a coated carbide grade helps to secure repeatable surface finish and to lower overall machining costs through extended tool life. Selection criteria and manufacturer reliability that matters When matching tooling to an application, priority should be given to the material group, desired tool life and chip‑forming behaviour. The insert is intended for stainless steel machining and pairs well with holders that accept TS16-format indexable plates; toolmakers should confirm seat and clamping compatibility before assembly. Produced under the Walter Tools umbrella, this cutting grade benefits from the manufacturer’s emphasis on stable cutting edges and consistent coating application, which together ease process qualification and tool standardisation across workshops and production lines. For tailored application advice on Walter Tools Tiger·tec Gold inserts and to place an order through Metav Werkzeuge, contact Metav Werkzeuge GmbH by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialist consultation and ordering assistance are available. Technical data SKU: TS16-EL12UN-WMP32G-WALTER Article designation: TS16-EL12UN WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material group: M (stainless steels) Grade: WMP32G Chipbreaker: EL12UN Coating technology: Tiger·tec Gold Special features Coated carbide cutting grade Optimised for secure chip formation Suitable for medium to robust cutting conditions Intended for ISO group M materials (stainless steels) FAQ What materials is this insert best suited to machine? The TS16-EL12UN WMP32G insert is formulated for stainless steel (ISO group M) and performs well under medium to robust cutting conditions typical for such alloys. What is the role of the EL12UN chipbreaker? The EL12UN chipbreaker on this indexable insert controls chip shape and evacuation to reduce the risk of entangling swarf and to protect surface finish during stainless-steel turning. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating enhances wear resistance and reduces built‑up edge formation, which contributes to longer cutting-edge life and more predictable tool-wear behaviour for the WMP32G grade. Is this insert compatible with standard TS16 toolholders? The designation TS16 indicates compatibility with toolholders designed for TS16-format indexable plates; verify holder seat and clamping specifications before use. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL12W WMP32G WMP32G Wendeplatten - Walter Tools
High process reliability and stable chip control for machining stainless steel make this insert a cost-effective choice; benefit from the Tiger‑tec Gold coating and the robust WMP32G grade for consistent tool life and dependable cutting-edge stability. Order the TS16-EL12W WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS16-EL12W WMP32G turning indexable insert — Walter Tools, Tiger‑tec Gold for stainless steel TS16-EL12W WMP32G is a coated turning insert designed for secure chip formation and reliable performance when machining stainless steel in medium to robust conditions Tiger‑tec Gold coating for long tool life Optimised chip control for stainless steel Coated carbide grade WMP32G for robustness Chipbreaker EL12W for stable cutting edges Secure chip control for safer stainless‑steel turning The insert’s EL12W chipbreaker is engineered to promote stable chip formation when machining stainless steel, a group of materials that typically generate long, adhesive chips and high cutting temperatures. By encouraging predictable chip flow, the geometry reduces the risk of built‑up edge and frequent interruptions, which supports a steadier production process. The result is fewer workpiece rejections and more consistent cycle times in serial turning tasks. Extended tool life and reproducible machining results Thanks to the Tiger‑tec Gold coating and the WMP32G coated‑carbide grade, this indexable insert offers improved wear resistance and reliable cutting‑edge stability under medium to robust conditions. The surface treatment reduces adhesive wear and provides thermal protection during heavier cuts, so tool changes are less frequent and process uptime increases. This makes the insert well suited to operations that demand repeatable surface quality and predictable tool life. Practical application guidance for the workshop The geometry and material pairing are optimised for turning applications on stainless steel where secure chip control and edge integrity are priorities. In practice, the insert performs best with stable clamping and adequate coolant supply to manage temperatures. The combination of a proven coating system and a grade focused on toughness helps maintain dimensional accuracy and surface finish during mid‑heavy cutting operations, supporting higher productivity with reduced rework. For ordering advice, specification checks or to request delivery of Walter Tools TS16-EL12W WMP32G inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on suitability and availability Technical data Article number: TS16-EL12W-WMP32G-WALTER Product label: Drehwendeschneidplatte TS16-EL12W WMP32G Walter Tools Product type: Drehwendeschneidplatte (turning indexable insert) Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: EL12W ISO designation: TS16-EL12W WMP32G Facts Material group: M Suitable material: stainless steel Special features Coating technology: Tiger‑tec Gold Coated carbide grade: WMP32G Chip control: EL12W chipbreaker Application focus: medium to robust turning on stainless steel FAQ What materials is this insert suitable for? The TS16-EL12W WMP32G insert from Walter Tools is tailored for machining stainless steel and performs reliably under medium to robust cutting conditions. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating increases thermal and wear resistance, extending tool life and improving process stability when using the WMP32G grade on stainless steel. What benefit does the EL12W chipbreaker provide? The EL12W chipbreaker promotes consistent chip formation and reduces the likelihood of built‑up edge, contributing to uninterrupted turning cycles and better surface quality. Is this insert suitable for high feed or heavy roughing operations? The WMP32G grade and robust geometry are designed for medium to robust conditions; suitability for extreme heavy roughing should be validated against machine stability and cutting parameters. How does the WMP32G grade differ from standard coated carbides? WMP32G is a Walter Tools coated‑carbide grade optimised for toughness and stable cutting edges on stainless steels, offering a balance between wear resistance and edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer Walter Tools.
TS16-EL14UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for dependable chip control and an extended tool life in stainless steel applications; ideal for continuous production environments. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. TS16-EL14UN WMP32G indexable turning insert – Tiger‑tec Gold coating, for stainless steel | Walter Tools TS16-EL14UN WMP32G is an indexable turning insert engineered for reliable performance when machining stainless steels under medium to robust conditions Tiger‑tec Gold coating for long tool life Optimised for machining stainless steel EL14UN chipbreaker for stable chips WMP32G grade for robust cutting conditions Proven coating technology for consistent edge stability The Tiger‑tec Gold technology combines a wear-resistant coating with a robust substrate to deliver consistent cutting-edge stability when working with stainless materials. This combination reduces the risk of built‑up edge formation and supports reproducible performance over extended tool life. For workshops producing repeated turned parts, the coated grade achieves steadier results and fewer tool changes, which translates into higher uptime and lower process variance. Controlled chip formation improves surface quality The integrated EL14UN chipbreaker is designed to produce short, controlled chips in demanding conditions, helping to avoid long, hazardous swarf and minimising interruptions. Stable chip control leads to improved surface finish and reduces the frequency of manual chip handling. For manufacturers aiming for predictable part quality, this function supports a smoother machining cycle and more consistent dimensional output. Productivity gains through reduced downtime Selecting the WMP32G grade for applications on stainless steel supports longer intervals between insert changes and fewer unplanned stops. The coated carbide composition balances toughness and wear resistance to handle the thermal and mechanical challenges posed by this material group. The result is measurable productivity benefits: fewer tool exchanges, less machine idle time and a more economical production run in serial machining. Clear application guidance for reliable integration Marked as suitable for the material group M, the insert is especially appropriate for stainless steels, which often require particular attention due to their toughness and heat sensitivity. The ISO‑style designation aligns the insert with common toolholder systems, enabling straightforward replacement and integration into existing turning tool programmes. For users less familiar with grade selection, the WMP32G specification provides a practical, reliable choice for moderate to robust cutting tasks. Brand reliability and repeatable performance Produced under the Walter Tools series using Tiger‑tec Gold technology, this insert benefits from the manufacturer's focus on stable cutting edges and consistent tool life. The grade's design supports repeatable results across batch sizes, helping maintain process standards and part uniformity that are critical in professional metalworking environments. For recommendations tailored to specific stainless steel alloys or to secure Tiger‑tec Gold inserts, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com — technical consultation is available to ensure the right insert selection for each application Technical data Article number: TS16-EL14UN-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-EL14UN WMP32G Walter Tools Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WMP32G Material group: M ISO designation: TS16-EL14UN WMP32G Special features Coated carbide grade Chipbreaker type: EL14UN Application: stainless steels (material group M) Designed for moderate to robust cutting conditions FAQ What materials is this insert intended for? The TS16-EL14UN WMP32G indexable turning insert is intended primarily for stainless steels (material group M) and is optimised to manage their tendency to form built‑up edges and generate heat. What does the WMP32G grade signify? WMP32G is a Walter Tools grade in the Tiger‑tec Gold family; it denotes a coated carbide formulation tuned for a balance of wear resistance and toughness suitable for demanding stainless steel machining. How does the EL14UN chipbreaker affect performance? The EL14UN chipbreaker promotes short, consistent chips, improving chip control and contributing to a better surface finish while reducing the risk of long swarf interfering with the machining process. Can this insert be used for non‑stainless materials? The TS16-EL14UN WMP32G is specified for material group M; use on other material groups is not documented here and should be validated for the specific alloy and cutting conditions before application. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are cited for clarification only and do not imply any affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
TS16-EL14W WMP32G EL14W Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G carbide grade for consistent chip control and stable edge life in stainless steel turning; order the insert via Metav Werkzeuge or consult their specialists for process support. TS16-EL14W WMP32G indexable turning insert (for stainless steel) — Tiger‑tec Gold by Walter Tools TS16-EL14W WMP32G is an indexable turning insert engineered for reliable machining of stainless steel under medium to robust cutting conditions, featuring the EL14W chipformer and Walter Tools' Tiger‑tec Gold technology Tiger‑tec Gold coating for long tool life Optimised EL14W chipformer for stainless steel Coated carbide grade WMP32G for robust cutting Reliable edge stability in medium to heavy cuts Consistent chip control and secure cutting in stainless steels The combination of the EL14W chipformer with the WMP32G coated carbide grade delivers predictable chip behaviour when machining materials in the ISO M group (stainless steels). The insert’s geometry is tailored to support secure chip formation and evacuation, which reduces the risk of built-up edge and improves component surface quality. For users less familiar with ISO groups: M identifies stainless steels that tend to be tough and generate heat; the insert’s profile mitigates those effects and supports a stable turning process. In practice, this results in fewer interruptions and more consistent cycle times. Improved edge stability and extended service intervals Thanks to Walter Tools’ Tiger‑tec Gold coating technology and the robust carbide substrate, the insert provides enhanced edge stability in medium to heavy operations. The coating improves resistance to abrasion and thermal loading, which extends the usable life of the cutting edge and decreases the frequency of index changes. The net effect is a more economical machining process through fewer tool changes and less unplanned downtime, supporting higher uptime in production environments where reproducibility matters. Practical application guidance and process reliability Designed primarily for turning applications on stainless steel, this insert is suited to shop-floor conditions that require repeatable results under variable feeds and depths of cut. The geometry and coating together aid tolerance maintenance and surface finish in series production. For process integration, toolholders compatible with the TS16‑EL14W form ensure correct clamping and heat dissipation. If specific cutting data or holder recommendations are required, technical support can advise on optimised parameters to match a given lathe, material grade and workpiece requirement. For demanding stainless steel turning choose the Walter Tools TS16-EL14W WMP32G with Tiger‑tec Gold—contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-EL14W-WMP32G-WALTER Name: Turning indexable insert TS16-EL14W WMP32G Walter Tools Product type: Indexable turning insert Data Grade: WMP32G Series: Tiger‑tec Gold Chipformer: EL14W Material designation: M (stainless steels) Special features Coated carbide grade Tiger‑tec Gold coating technology EL14W chipformer optimised for stainless steel Designed for medium to robust turning applications FAQ What materials is this insert suitable for? The TS16-EL14W WMP32G is specified for stainless steel (ISO M); the WMP32G grade and EL14W chipformer support secure chip formation on these materials. How does Tiger‑tec Gold benefit tool life? Tiger‑tec Gold on the TS16-EL14W WMP32G reduces abrasive and thermal wear, delivering improved edge stability and longer intervals between index changes. Is this insert suitable for heavy roughing operations? The insert is designed for medium to robust cutting; the combination of the WMP32G grade and EL14W geometry gives reliable performance under demanding conditions. Where can I get cutting data and holder recommendations? Metav Werkzeuge can provide application-specific guidance and recommended cutting parameters for the TS16-EL14W WMP32G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of Walter Tools. Walter AG (brand appearance: Walter Tools), with headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
TS16-EL16UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the optimised EL16UN chipbreaker for reliable stainless‑steel turning and stable edge life; order the TS16-EL16UN WMP32G directly via Metav Werkzeuge or consult Metav Werkzeuge’s advisors for application support. TS16-EL16UN WMP32G — indexable turning insert, Tiger·tec Gold coating for stainless steel | Walter Tools A TS16-EL16UN WMP32G indexable turning insert engineered to secure stable cutting edges and dependable chip control when machining stainless steel under medium to robust conditions Tiger·tec Gold coating for extended tool life Optimised EL16UN chip control Grade WMP32G developed for stainless steel (M) Stable edge for productive turning Consistent cutting on stainless steel for fewer interruptions The TS16-EL16UN WMP32G delivers consistent edge stability thanks to the WMP32G coated‑carbide grade within the Tiger·tec Gold family, which is developed specifically for stainless steel workpieces. The combination of coating and substrate promotes controlled abrasion resistance and a predictable wear pattern, reducing the risk of built‑up edge and unplanned rework. In practice, this means greater process reliability and fewer tool changes during mixed‑batch production, supporting steady cycle times and better surface integrity. Improved chip control reduces downtime and post‑processing Equipped with the EL16UN chipbreaker geometry, the insert supports reliable chip formation even under tougher cutting conditions typical for stainless grades. A controlled chip flow lowers the likelihood of tangled or hot chips that can damage the workpiece or the toolholder, which in turn decreases manual handling and secondary operations. The targeted chipshape and evacuation behaviour contribute to cleaner toolpaths and reduced risk of surface marks, so finishing steps are often faster or can be omitted entirely. Easy process integration and reproducible results The insert is supplied in a standard TS16 format and is suitable for a wide range of turning toolholders designed for indexable inserts, enabling straightforward integration into existing tool setups. The WMP32G grade provides a balance of toughness and wear resistance tailored to the typical thermal and mechanical demands of stainless steels, giving predictable tool life and repeatable part quality. For production environments seeking stable output and straightforward tool management, this insert supports efficient planning and inventory control. For technical advice and availability of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge’s specialists can advise on grade selection and machining parameters Technical Data SKU: TS16-EL16UN-WMP32G-WALTER Product type: indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL16UN Application group: M (stainless steel) Facts ISO designation: TS16-EL16UN WMP32G Material group code: M Special features Coating: Tiger·tec Gold Substrate: coated cemented carbide (grade WMP32G) Suitable for: stainless steel machining Intended behaviour: stable chip formation and edge life FAQ What materials is this insert intended for? The TS16-EL16UN WMP32G insert is intended for stainless steel (material group M) and is optimised for the toughness and heat‑generation typical of those alloys. What does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and supports a stable, predictable wear pattern, improving tool life and surface quality when machining stainless steel. How does the EL16UN chipbreaker affect machining? The EL16UN chipbreaker produces controlled chip shapes that assist chip evacuation and reduce the risk of chip entanglement, which helps lower downtime and the need for manual chip handling. Is the insert suitable for heavy interrupted cuts? The WMP32G grade is designed for medium to robust conditions typical of stainless‑steel turning; the combination of substrate toughness and coating offers resistance to chipping and edge breakdown in demanding cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL16W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G carbide grade for reliable machining of rostfreier Stahl; the insert delivers stable chip formation and robust edge life, helping to reduce unplanned tool changes. Order the insert directly via Metav Werkzeuge or consult the team for application recommendations. TS16-EL16W WMP32G indexable turning insert for rostfreier Stahl — Tiger‑tec Gold by Walter Tools The TS16-EL16W WMP32G is a coated, solid-carbide indexable insert engineered for turning operations on rostfreier Stahl under medium to robust cutting conditions. Tiger‑tec Gold coated carbide grade WMP32G Optimised for rostfreier Stahl machining Stable chip formation under robust conditions Extended edge life and superior wear resistance Predictable performance where rostfreier Stahl challenges arise The insert’s combination of Tiger‑tec Gold coating and the WMP32G grade means it is tailored for the specific demands of machining rostfreier Stahl. These materials tend to be tough, prone to built-up edge and to generate heat; the insert’s design supports secure stable chip formation, which reduces interruptions and minimises the risk of edge deterioration. In production terms, that translates into fewer tool changes and more consistent component quality across batch runs. The result is a pragmatic increase in process efficiency and lower total machining cost per part. Chip control that supports continuous production The EL16W chipbreaker geometry is configured to manage chips reliably when cutting harder, more ductile alloys. As a defined chipbreaker, EL16W promotes predictable chip shapes and evacuation, helping to avoid entanglement and to maintain surface integrity. For workshops seeking steady cycle times, this geometry reduces the need for manual intervention at the machine and supports unattended or semi-automated shifts without compromising safety or workpiece finish. Coating and grade engineered for longer service life A coated carbide solution offers a balance of toughness and thermal stability: the coated carbide formulation and the WMP32G specification deliver improved wear resistance and extended edge life compared with uncoated alternatives. This means the tool maintains cutting performance over more cycles, giving a practical return on tooling investment. For production environments where downtime is costly, the insert’s resistance to abrasive and adhesive wear helps preserve dimensional stability and part tolerances for longer periods. Practical integration into turning setups The insert follows the TS16 family designation and the ISO-style marking TS16-EL16W WMP32G, which facilitates identification and replacement in standard toolholder systems compatible with TS16 inserts. As an indexable insert designed for turning, it allows quick index changes to restore cutting geometry without complex regrinding. That interchangeability supports lean tooling strategies and simplifies inventory planning for workshops concentrating on rostfreier Stahl components. For application-specific advice on using the Tiger‑tec Gold TS16-EL16W WMP32G insert in rostfreier Stahl, contact Metav Werkzeuge for process recommendations and supply options: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: TS16-EL16W-WMP32G-WALTER Description: Drehwendeschneidplatte TS16-EL16W WMP32G Walter Tools Manufacturer: Walter Tools Facts Material group: M Suitable for: rostfreier Stahl Special features Coating: Tiger‑tec Gold (coated carbide) Grade: WMP32G Chipbreaker: EL16W ISO designation: TS16-EL16W WMP32G Label: TS16-EL16W WMP32G Walter Tools FAQ What materials is this insert intended for? The TS16-EL16W WMP32G insert is specified for machining rostfreier Stahl and is formulated to handle the toughness and thermal behaviour typical of that material group. What does Tiger‑tec Gold mean for performance? Tiger‑tec Gold denotes the coating and substrate technology that gives the WMP32G grade enhanced wear resistance and thermal stability, improving tool life during continuous machining of rostfreie Stähle. How does the EL16W chipbreaker affect production? The EL16W chipbreaker promotes stable chip formation and easier evacuation, which supports uninterrupted machining and reduces manual interventions on the machine. Is the insert suitable for heavy-duty turning? The combination of the WMP32G grade and Tiger‑tec Gold coating is geared toward medium to robust cutting conditions, offering reliable edge stability under demanding operations. How is the insert replaced or indexed? The insert uses the TS16 designation and can be indexed to present a fresh cutting edge without regrinding, allowing quick replacement and minimal downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the listed brands. The offered item is an original, brand-new product from the manufacturer.
TS16-EL18UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G cutting grade for stable chip formation and extended tool life in demanding stainless steel turning operations; order directly via Metav Werkzeuge or consult our specialists if application advice is required. TS16-EL18UN WMP32G indexable turning insert by Walter Tools — Tiger·tec Gold coated, EL18UN chipbreaker A TS16-EL18UN WMP32G indexable turning insert engineered for reliable turning of stainless steel under medium to robust cutting conditions, offering controlled chips and consistent edge stability. Tiger·tec Gold coating for long tool life EL18UN chipbreaker ensures stable chip control Optimised for stainless steel (ISO group M) Higher process stability for stainless steel turning The combination of the WMP32G coated carbide grade and the Tiger·tec Gold coating delivers a marked improvement in resistance to edge wear and thermal loading when machining stainless steel. The insert’s formulation supports secure chip formation and reduces the tendency for built-up edge, which directly lowers surface defects and rework. For production environments where repeatability matters, this cutting grade helps maintain consistent component quality over longer tool life, reducing unscheduled tool changes and improving overall throughput. Reduced machining risk through precise chip control The EL18UN chipbreaker geometry is designed to produce predictable, manageable chips during turning operations in tougher stainless steels. Controlled chip breakage minimises entanglement and tool interference, which in turn reduces the risk of tool damage and machine downtime. This insert’s geometry and coating combination mean fewer interruptions, safer handling of swarf and a smoother production flow — an economy of motion and time that supports higher machine utilisation and lower per-part costs. Practical fitment and application advice for workshop use Designated as an indexable turning insert with the TS16-EL18UN designation, this cutting part fits standard tool holders that accept this insert form. The material group designation M indicates suitability for stainless steels according to ISO classifications; the grade performs best in medium to robust cutting scenarios where heat generation and material toughness are significant factors. For easy integration, confirm the corresponding toolholder and clamping style on the lathe, and consider coolant and speed adjustments to match the grade’s thermal and wear characteristics. Contact Metav Werkzeuge for tailored application recommendations or to check stock availability of Walter Tools Tiger·tec Gold WMP32G inserts Technical Data Article number: TS16-EL18UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-EL18UN WMP32G Walter Tools Brand: Walter Tools Facts Material group: M (stainless steels) Coating series: Tiger·tec Gold Chipbreaker: EL18UN Grade: WMP32G Special features Coated carbide cutting grade Designed for medium to robust machining of stainless steels Stable chip formation and edge control Indexable turning insert, designation TS16-EL18UN Series: Tiger·tec Gold FAQ What materials is this insert intended for? The TS16-EL18UN WMP32G is intended primarily for stainless steel applications (ISO group M), where toughness and heat resistance are required. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating enhances thermal resistance and wear performance of the WMP32G grade, extending tool life and stabilising cutting edges under elevated temperatures. Which chipbreaker is specified and why does it matter? The insert uses the EL18UN chipbreaker, which provides controlled chip breaking to reduce swarf issues and improve operational safety and productivity. Is this insert suitable for heavy interrupted cuts in stainless steel? Yes; the WMP32G grade combined with the EL18UN geometry is formulated for medium to robust cutting conditions typical of heavy or interrupted stainless steel machining. How should cutting data be adjusted for best results? Adjust cutting speeds and feed to account for heat generation in stainless steels; the WMP32G grade benefits from controlled coolant use and stable clamping to achieve consistent tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation and identification only; there is no affiliation between our company and the named brands. The described article is original and sold as factory-new merchandise from the stated manufacturer, Walter Tools.
TS16-EL19W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the EL19W chipbreaker for improved productivity and stable chip formation when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-EL19W WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl (Walter Tools) The TS16-EL19W WMP32G is an indexable turning insert engineered for reliable, repeatable performance in the machining of rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coating for enhanced wear resistance EL19W chipbreaker for stable chip control Optimised for rostfreier Stahl machining Walter Tools standard for repeatable performance Higher throughput through a wear-resistant cutting grade The combination of the WMP32G carbide grade and the Tiger·tec Gold coating yields a cutting edge that stands up to the challenges of rostfreier Stahl: toughness, tendency to build up and elevated heat at the cutting zone. As a coated carbide grade, it supports more consistent tool life and reduces unplanned interventions, which translates directly into higher machine utilisation and lower per‑part costs. The application-focused microstructure of the grade promotes secure chip formation, reducing the risk of edge deterioration and minimising rework. Consistent surface quality via targeted chip control The integrated EL19W chipbreaker has been developed to shape chips reliably when turning rostfreier Stahl. Controlled chip flow reduces vibration and improves surface finish, so finishing passes can often be shortened or removed. For workshops seeking predictability, the insert’s geometry and coating combination help maintain a stable cutting edge across a sequence of parts, enabling reproducible results and easier process documentation. The design is particularly advantageous where medium to robust cutting parameters are required. Seamless process integration and industrial reliability Designed as an indexable turning insert, the component fits standard toolholder systems for inserts of its designation and supports quick index changes to restore a fresh cutting edge. The Walter Tools lineage emphasises stable cutting edges and consistent tool life, supporting productive machining in series production. For engineers and production managers, this means predictable cycle times and simplified tool inventory thanks to a recognised grade and series. Application advice and recommendations for optimised feeds and depths of cut can be provided by technical consultants to ensure ideal integration into specific machining processes. Contact Metav Werkzeuge today to discuss how the Tiger·tec Gold WMP32G insert can improve turning performance for rostfreier Stahl applications or to request tailored technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-EL19W-WMP32G-WALTER SKU: TS16-EL19W-WMP32G-WALTER Product type: Drehwendeschneidplatte / indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL19W Manufacturer: Walter Tools Facts Material group: M Application: rostfreier Stahl Special features Coated carbide grade designed for stainless applications Optimised chip control geometry EL19W Suitable for medium to robust turning operations Repeatable cutting edge performance Walter Tools product quality FAQ Which materials is this insert suitable for? The TS16-EL19W WMP32G insert is specified for machining rostfreier Stahl and was developed to handle the toughness and heat‑related challenges of that material group. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade reduces wear and adhesion on the cutting edge, improving tool life and contributing to consistent surface quality with fewer process interruptions. What does the EL19W chipbreaker do on the insert? The EL19W chipbreaker shapes and controls chips during turning, reducing the likelihood of entangling or damaging chips and promoting a stable cutting process when machining rostfreier Stahl. How does this insert support production reliability? Manufactured by Walter Tools, the TS16-EL19W WMP32G insert offers consistent edge stability and repeatable performance, helping to lower downtime and support predictable cycle times in series production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-EL2.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Combining Tiger‑tec Gold coating, the WMP32G carbide grade and the EL2.0ISO chipbreaker, the insert offers secure chip control and sustained edge life in stainless‑steel turning operations. Order the insert directly via Metav Werkzeuge or consult their technical team for application support. TS16-EL2.0ISO WMP32G – indexable turning insert with EL2.0ISO chipbreaker, Tiger‑tec Gold for stainless steel (Walter Tools) The TS16-EL2.0ISO WMP32G is an indexable turning insert engineered for secure chip formation and reliable performance when machining stainless steel under moderate to robust conditions Tiger‑tec Gold coating for extended edge life Optimised EL2.0ISO chipbreaker for stable chips Designed for stainless steel (ISO group M) Consistent performance under robust conditions Improved process reliability through advanced coating and grade The combination of Tiger‑tec Gold coating and the WMP32G grade delivers a balance of wear resistance and toughness that directly benefits production stability. The coated cemented carbide substrate reduces flank wear and lowers the tendency for built‑up edge, which is common when machining stainless materials. As a result, tool changes become less frequent and cycle times remain steady, supporting predictable batch throughput and higher overall equipment effectiveness. This approach is particularly valuable in repetitive turning tasks where reproducible tool life is required. Stable chip control and better surface quality with EL2.0ISO The EL2.0ISO chipbreaker is designed to manage the specific chip formation behaviour of stainless steels, promoting short, controllable chips and reducing entanglement. By shaping chip flow and dispersing heat at the cutting zone, the chipbreaker helps to avoid thermal peaks that cause surface damage and premature edge deterioration. The outcome is improved surface finish and fewer interruptions for chip clearance. For workshops facing built‑up edge or long, stringy chips, this geometry provides a tangible improvement in process reliability and operator safety. Application fit and workshop benefits for stainless‑steel turning Specified for ISO group M materials, this indexable insert is aimed at turning applications where stainless‑steel workpieces require secure cutting action under medium to robust conditions. The WMP32G grade accommodates the material’s toughness and heat sensitivity, enabling stable cutting even when feeds or depths increase for productivity. In practice, the insert supports consistent dimensional accuracy and repeatable part quality, which is essential for series production and critical tolerances. Integration into existing toolholders is straightforward, making it a pragmatic choice for modern turning operations. For practical application advice or to secure reliable supply of the TS16‑EL2.0ISO WMP32G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss requirements and availability Technical Data Article number: TS16-EL2.0ISO-WMP32G-WALTER Designation: TS16-EL2.0ISO WMP32G Series: Tiger‑tec Gold Facts Material application group: M (stainless steel) Grade: WMP32G Chipbreaker: EL2.0ISO Special features Coating technology: Tiger‑tec Gold Coated cemented carbide grade Indexable turning insert type Suited for moderate to robust stainless‑steel machining Manufacturer: Walter Tools FAQ What workpiece materials is this insert intended for? The TS16‑EL2.0ISO WMP32G insert is intended primarily for stainless steel (ISO group M) applications and is optimised for the specific cutting behaviour of these materials. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating increases wear resistance and reduces built‑up edge on the WMP32G grade, resulting in longer tool life and more consistent machining results. What benefit does the EL2.0ISO chipbreaker provide? The EL2.0ISO chipbreaker promotes short, controllable chips and helps disperse heat at the cutting zone, improving surface finish and reducing interruptions caused by poor chip control. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for informational purposes only; there is no connection between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer.
TS16-EL2.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WMP32G grade provides reliable edge stability and optimised chip control for machining stainless steel, resulting in predictable tool life and consistent productivity; order the insert directly via Metav Werkzeuge or consult their specialists for application support. TS16-EL2.5ISO WMP32G – indexable turning insert, Tiger·tec Gold (Walter Tools) TS16-EL2.5ISO WMP32G is a precision indexable turning insert engineered for medium to robust turning operations, specifically optimised for stainless steel and demanding cutting conditions. Tiger·tec Gold coated carbide grade WMP32G Optimised EL2.5ISO chipbreaker for stable chips Designed for stainless steel machining Consistent edge stability and long tool life High-performance cutting for consistent production The Tiger·tec Gold coating combined with the WMP32G carbide grade delivers a balance of wear resistance and reliable cutting-edge retention that supports uninterrupted production cycles. The insert’s design promotes stable chip formation, which reduces the likelihood of built-up edge and unexpected interruptions during cuts in stainless steel. For manufacturing environments where repeatability and downtime reduction are critical, this insert contributes to a measurable increase in process reliability and tool life. Controlled chips and reduced rework in stainless applications The EL2.5ISO chipbreaker is shaped to guide chips away from the cutting zone, improving evacuation and reducing heat concentration at the cutting edge. When turning tough, ductile stainless steel, the controlled chip flow helps prevent surface damage and reduces secondary finishing. The combination of chip geometry and the coated carbide substrate means fewer interrupted cuts, less scrap and lower rework rates, supporting an efficient machining workflow. Practical use and machining advice for shops The insert is intended for medium to heavy-duty turning where stainless steel is processed and where secure chip control is required. Recommended practice includes selecting appropriate cutting parameters to match the toolholder and machine rigidity; optimising feed and cutting speed will exploit the coating benefits while avoiding undue thermal load. For shops upgrading from general-purpose grades, this grade offers a clear step towards higher process stability and longer intervals between index changes. Reliability from a recognised tool brand As a Walter Tools grade, the insert benefits from established material and coating expertise, resulting in robust edge performance under demanding conditions. The WMP32G grade is specifically formulated for stainless steel and addresses the material’s tendency to work-harden and produce stringy chips. Specifying this insert supports operational consistency and predictable tool economics, which is particularly valuable in production-focused environments where downtime and quality deviations are costly. For tailored application advice on Walter Tools Tiger·tec Gold inserts and fast availability, contact Metav Werkzeuge for specialist recommendations and order assistance. Technical Data Article number: TS16-EL2.5ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-EL2.5ISO WMP32G Walter Tools Product type: Indexable turning insert Facts Grade designation: WMP32G Series: Tiger·tec Gold Chipbreaker: EL2.5ISO Material group: M (stainless steel) Special features Coated carbide (Tiger·tec Gold technology) Optimised chip control geometry Designed for medium to robust turning conditions Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The TS16-EL2.5ISO WMP32G insert is intended primarily for stainless steel; the WMP32G grade and EL2.5ISO chipbreaker are optimised for the typical challenges of stainless machining. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and edge stability, which together reduce flank wear and extend the effective life of the insert during continuous operations. Is the chipbreaker suitable for heavy interrupted cuts? The EL2.5ISO chipbreaker supports stable chip formation and evacuation; it is appropriate for medium to more robust cutting conditions, improving control in applications that might otherwise generate long or tangled chips. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names mentioned are the property of their respective owners and are used for explanation only. There is no affiliation between our company and the named brands. The article offered is original, factory-new merchandise of the manufacturer.
TS16-EL20UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WMP32G grade for improved tool life and consistent chip control when machining rostfreien Stahl. Benefit from a chipbreaker designed for stable cutting under medium to robust conditions and contact Metav Werkzeuge for application advice or ordering. TS16-EL20UN WMP32G Drehwendeschneidplatte – Tiger·tec Gold, for rostfreien Stahl (Walter Tools) The TS16-EL20UN WMP32G is an indexable turning insert engineered for reliable machining of rostfreien Stahl in medium to robust cutting conditions Tiger·tec Gold coating for enhanced wear resistance Coated carbide grade WMP32G for rostfreien Stahl EL20UN chipbreaker for stable chip formation Reliable performance under medium to heavy cuts Consistent cutting performance and extended tool life The Tiger·tec Gold technology combines a specialised coating with a robust substrate to reduce flank wear and delay notch formation, resulting in longer effective life of the insert. The WMP32G grade is a coated carbide formulated specifically for the challenges of rostfreien Stahl, which tends to be tough and generates heat at the cutting edge. This composition supports predictable wear behaviour and helps maintain dimensional stability across longer production runs, contributing directly to process reliability and fewer unscheduled tool changes. Improved chip control and surface finish under demanding conditions The integrated EL20UN chipbreaker promotes small, controllable chips and reduces the risk of built-up edge that is common when machining rostfreien Stähle. Stable chip formation improves evacuation and lowers the chance of surface damage, so the workpiece quality benefits from a consistent cutting geometry. By controlling chips more effectively, the insert supports safer, cleaner machining and reduces interruptions related to chip entanglement, which in turn helps maintain cycle-time targets and product quality. Efficient integration for productive turning applications As an indexable turning insert from Walter Tools, this component is designed for quick seating and reliable repeatability in standard toolholders. The combination of coating, grade and chipbreaker results in fewer insert changes and predictable maintenance intervals, supporting overall shop-floor productivity. The insert is suited to workshops and production environments seeking a balanced solution for machining rostfreien Stahl with good process stability and repeatable surface results. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Gold inserts for rostfreien Stahl machining and to discuss suitable toolholder pairings and batch availability Technical Data Article number: TS16-EL20UN-WMP32G-WALTER Product type: Drehwendeschneidplatte SKU: TS16-EL20UN-WMP32G-WALTER Facts Material group: M (rostfreie Stähle) Grade: WMP32G Chipbreaker: EL20UN Special features Coating: Tiger·tec Gold Substrate: coated carbide ISO designation: TS16-EL20UN WMP32G Series: Tiger-tec Gold Brand: Walter Tools FAQ What materials is this insert suitable for? The insert is specified for machining rostfreiem Stahl (material group M) and is optimised for medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WMP32G grade offers enhanced wear resistance and stable cutting behaviour, which translates into longer tool life and more consistent surface quality during rostfreien Stahl machining. Which chip behaviour can be expected with the EL20UN chipbreaker? The EL20UN chipbreaker produces controlled, short chips for safer evacuation and reduced risk of built-up edge, improving process stability and surface finish. Is this insert compatible with standard turning toolholders? The insert follows common ISO designation conventions (TS16-EL20UN WMP32G) and is intended for use in standard indexable turning toolholders designed for the same insert geometry. Can this insert reduce downtime in series production? By providing consistent wear characteristics and effective chip control, the insert supports longer intervals between tool changes and contributes to reduced unplanned downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from Walter Tools.
TS16-EL20W WMP32G EL20W Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the EL20W chipbreaker to achieve stable chip control and extended edge life when machining stainless steels; the robust WMP32G grade delivers consistent performance in mid to heavy-duty turning operations. Order directly via Metav Werkzeuge or consult their technical team for application-specific guidance. TS16-EL20W WMP32G — Turning indexable insert, Tiger·tec Gold, for stainless steels — Walter Tools TS16-EL20W WMP32G is a coated turning indexable insert designed for reliable machining of stainless steels in middle to robust cutting conditions Tiger·tec Gold coating for longer tool life EL20W chipbreaker for stable chip control Engineered for stainless steels (ISO M group) Reliable edge retention in mid to robust cuts Consistent performance on stainless steels The WMP32G grade, utilising Tiger·tec Gold coating technology, is formulated to cope with the specific challenges of stainless steels: high toughness, tendency to build up a chip, and elevated heat generation. The coating promotes wear resistance and reduces flank wear, which translates into a steadier dimensional outcome over longer production runs. For manufacturers requiring reproducible surface quality and predictable tool life, this insert offers a balanced compromise between abrasion resistance and fracture toughness. The result is fewer tool changes and improved process stability under variable loads. Reduced downtime through reliable chip control and edge stability Equipped with the EL20W chipbreaker, this turning insert supports controlled chip formation that lowers the risk of entanglement and tool damage in continuous turning operations. Stable chip control reduces manual intervention and the need for frequent machine stops, improving overall equipment effectiveness. The substrate and coating combination contributes to a secure cutting edge that resists thermal and mechanical wear, meaning tools keep cutting longer with less deterioration in surface finish. For production environments where consistency and uptime matter, this solution strengthens operational reliability. Practical integration and application guidance for production The insert is intended for straightforward integration into common clamping systems for turning operations and is suitable where medium to robust cutting parameters are applied to stainless steels. Its design supports machining strategies that favour steady feeds and sufficient coolant or lubricant to mitigate heat buildup; this complements the coated carbide’s properties and enhances the insert’s lifespan. When selecting cutting conditions, prioritise stable setups and verify compatibility with the chosen tool holder to exploit the insert’s benefits in productivity and repeatable component quality. Contact Metav Werkzeuge to discuss the TS16-EL20W WMP32G from Walter Tools, arrange supply, or request application-specific cutting data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-EL20W-WMP32G-WALTER Designation: TS16-EL20W WMP32G Type: Turning indexable insert Manufacturer: Walter Tools Core specifications Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL20W Material group: M (stainless steels) Material class indication: M Special features Coated carbide grade Optimised chip formation for stainless steels Designed for mid to robust cutting conditions WPL designation without grade: TS16-EL20W FAQ Is this insert suitable for machining austenitic stainless steels? The TS16-EL20W WMP32G insert from Walter Tools is formulated for the ISO M group and is suitable for austenitic and other stainless steels under medium to robust conditions. What does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance and thermal stability; the WMP32G grade benefits from this coating to maintain edge life during extended stainless steel turning operations. How does the EL20W chipbreaker affect machining? The EL20W chipbreaker promotes predictable chip control, reducing the likelihood of chip entanglement and supporting uninterrupted turning cycles with the Walter Tools insert. Can this insert be used for finishing operations? While optimised for mid to robust cuts in stainless steels, the insert can deliver good surface quality when parameters are adapted for finishing passes and stable tool setup is ensured. Which tooling systems are compatible with TS16-EL20W WMP32G? The insert fits standard tool holders designed for this indexable insert geometry; confirm holder compatibility with the TS16-EL20W designation before mounting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names mentioned belong to their respective owners and are used for informational purposes only. There is no affiliation between our company and the listed brands. The offered item is original and brand-new.
TS16-EL24UN WMP32G WMP32G Wendeplatten - Walter Tools
Combine the EL24UN chipbreaker with the Tiger‑tec Gold WMP32G grade for secure chip control and extended tool life during stainless‑steel turning; order or request application advice directly via Metav Werkzeuge to streamline production. TS16-EL24UN WMP32G — indexable turning insert TS16-EL24UN WMP32G for stainless steels | Walter Tools TS16-EL24UN WMP32G is an indexable turning insert engineered for medium to robust turning of stainless steels under demanding conditions. Tiger‑tec Gold coated grade WMP32G Optimised EL24UN chipbreaker For stainless steels (ISO M) Stable cutting edge and long tool life Consistent metal‑cutting performance for stainless steels The Tiger‑tec Gold technology paired with the WMP32G grade provides a coated carbide formulation optimised for materials in ISO group M. This combination reduces tendency to build up edge and supports predictable chip control, which is critical when machining tough, ductile workpieces. The insert’s geometry, featuring the EL24UN chipbreaker, encourages segmented chips and lowers heat concentration, resulting in steadier cutting forces and fewer unplanned stoppages. The technical setup prioritises repeatability and measurable process improvements on lathes and turning centres. Surface quality and process reliability when turning demanding alloys Stable edge integrity directly benefits surface finish and dimensional consistency. The insert’s cutting concept emphasises a stable cutting edge and controlled contact conditions to reduce the risk of work hardening or material smearing typical of stainless steels. In practical terms, this yields a reliable surface appearance with fewer rework cycles and a more consistent tolerance attainment. The grade’s coating assists thermal management at the cutting zone, supporting higher feed rates under sustained load while maintaining machining quality in serial production. Operational economy and predictable tool life Adopting a grade engineered for stainless steels leads to measurable gains in uptime and cost per component. The combination of chipbreaker and grade design translates into longer intervals between indexing and fewer insert changes, which reduces handling and setup time. From a production planning perspective, the insert supports process security by delivering repeatable results across batches. For shops seeking pragmatic, application‑oriented solutions, integration of this insert into established toolholders cut processing variability and helps maintain throughput targets with stable tool life benchmarks. For application recommendations or to source the Walter Tools TS16-EL24UN WMP32G insert through Metav Werkzeuge, please contact Metav Werkzeuge for tailored advice and availability. Technical data Article number: TS16-EL24UN-WMP32G-WALTER Product label: Drehwendeschneidplatte TS16-EL24UN WMP32G Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Grade: WMP32G ISO designation: TS16-EL24UN WMP32G Material group code: M Manufacturer: Walter Tools Facts Material group: M (stainless steels) Chipbreaker type: EL24UN Intended application: Turning / indexable insert use Coating technology: Tiger‑tec Gold Special features Coated carbide grade designed for rostfreie and high‑alloy steels Optimised chipformer for segmented chip formation Suitable for medium to robust cutting conditions Brand: Walter Tools Indexable turning insert format FAQ What materials is the TS16-EL24UN WMP32G suited for? The TS16-EL24UN WMP32G is formulated for machining materials in ISO group M, specifically stainless steels where chip control and thermal stability are required. How does the EL24UN chipbreaker improve performance? The EL24UN chipbreaker promotes segmented chip formation and reduces continuous chips, enhancing chip evacuation and stabilising cutting forces when machining ductile stainless steels. Does the Tiger‑tec Gold coating affect feed and speed recommendations? Yes, the Tiger‑tec Gold coating on the WMP32G grade improves heat resistance and wear behaviour, which can allow higher sustained cutting speeds and feed rates compared with uncoated grades under comparable conditions. Can this insert be used for finishing and semi‑finishing? The insert’s geometry and grade balance support semi‑finishing and many finishing operations on stainless steels, delivering consistent surface quality when parameters are matched to the workpiece and machine capability. Which brand manufactures this insert and what is the SKU? The insert is produced by Walter Tools and is listed under SKU TS16-EL24UN-WMP32G-WALTER for ordering and inventory purposes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanation and identification only. There is no affiliation between Metav Werkzeuge and the named manufacturers beyond the distribution or description of original factory‑new products. The offered item is an original factory‑new product of Walter Tools.
TS16-EL28UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the EL28UN chipbreaker for extended tool life and consistent chip control when machining stainless steel; order the TS16-EL28UN WMP32G insert directly via Metav Werkzeuge or consult our advisors for application support. TS16-EL28UN WMP32G indexable turning insert – Tiger·tec Gold for stainless steel | Walter Tools TS16-EL28UN WMP32G is an indexable turning insert designed for secure, repeatable machining of stainless steel under medium to robust cutting conditions Tiger·tec Gold coating for extended tool life Optimised EL28UN chipbreaker for stable chips Designed for stainless steel (M) machining Manufactured by Walter Tools for process security Greater uptime through predictable wear performance The combination of the Tiger·tec Gold coating and the WMP32G grade delivers markedly improved wear resistance compared with standard coated carbides, which reduces the frequency of tool changes and interruptions. For components in stainless steel, where heat generation and material ductility tend to challenge edge stability, this coated carbide formulation supports stable flank and crater behaviour. The result is a measurable increase in machining uptime and a reduction in unplanned downtime, improving overall production efficiency. Consistent chip control for safer, cleaner turning With the EL28UN chipbreaker geometry, the insert produces controlled, short chips that are easier to evacuate and manage in automated or manual turning operations. Stable chip formation minimises the risk of built-up edge and reduces surface damage on the workpiece, leading to better surface finish and fewer rework cycles. This geometric optimisation directly supports predictable cutting forces and a smoother process window when working with challenging ferritic and austenitic stainless steels. Process security and productivity from a proven brand Produced by Walter Tools, the insert is engineered for reproducible performance across batch production and single-part runs alike. The grade’s focus on edge robustness and the coating’s thermal stability translates into reliable tool life and consistent component quality, which supports higher machine utilisation and lower overall tooling costs. Where traceable, repeatable results matter, the combination of cutting-edge grade and manufacturer expertise enhances confidence in every machining step. Practical handling and system compatibility for the shop floor The designation TS16-EL28UN indicates the insert geometry and chipbreaker family commonly used in turning tool systems; the indexable format simplifies tool handling and quick‑change operations. Rapid indexing of the insert restores a fresh cutting edge without time-consuming regrinds, helping to shorten set-up and maintenance intervals. This practicality suits workshops that require both performance and straightforward logistics for tooling management. For technical selection or batch planning of Walter Tools turning inserts, contact Metav Werkzeuge for specific recommendations on the TS16-EL28UN WMP32G and to confirm availability with our specialists at Metav Werkzeuge Technical data Article number: TS16-EL28UN-WMP32G-WALTER Designation: TS16-EL28UN WMP32G Product type: Indexable turning insert Core specifications Grade/series: WMP32G / Tiger·tec Gold Chipbreaker: EL28UN Material group: M (stainless steel) SKU: TS16-EL28UN-WMP32G-WALTER Materials & features Coating: Tiger·tec Gold (coated carbide) Application: machining of stainless steel Manufacturer: Walter Tools Format: indexable insert (turning) FAQ What materials is this insert suitable for? The TS16-EL28UN WMP32G indexable turning insert is specified for machining stainless steel (material group M) and is tuned to handle the heat and ductility characteristics common to those alloys. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and thermal stability, which in turn supports longer tool life and more consistent performance over extended production runs with the TS16-EL28UN insert. What advantage does the EL28UN chipbreaker provide? The EL28UN chipbreaker promotes controlled, short chips and stable chip evacuation, reducing the risk of built-up edge and improving the surface quality produced by the TS16-EL28UN insert. Is the TS16-EL28UN compatible with common turning toolholders? The TS16 designation corresponds to a standard insert geometry intended for holders that accept TS16-form inserts; compatibility should be confirmed against the holder catalogue and the TS16-EL28UN WMP32G specification. Can this insert improve process security in mixed production? Yes, the combination of the WMP32G grade and Tiger·tec Gold coating in the TS16-EL28UN insert supports repeatable edge stability, which enhances process security and reduces scrap rates across varied stainless steel components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-EL28W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the EL28W chipformer for reliable machining of rostfreier Stahl; the result is stable chip control and extended tool life in medium to robust turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. TS16-EL28W WMP32G — Indexable turning insert TS16-EL28W WMP32G for rostfreier Stahl | Walter Tools The TS16-EL28W WMP32G is an indexable turning insert designed for turning applications in rostfreier Stahl, offering a Tiger·tec Gold coating and an EL28W chipformer for consistent chip control in medium to robust cutting conditions. Tiger·tec Gold coated carbide WMP32G Optimised EL28W chipformer for reliable chips Designed for rostfreier Stahl (ISO M) Stable cutting edge and consistent wear resistance Consistent chip control for demanding rostfreier Stahl turning The combination of the EL28W chipbreaker geometry and the Tiger·tec Gold coating ensures predictable chip formation when working with rostfreier Stahl (ISO M). The chipformer reduces the risk of long, stringy chips and supports smooth evacuation, which in turn lowers the chance of built-up edge and improves process stability. This behaviour is particularly important in tougher stainless grades where heat and ductility can otherwise compromise chip control. Improved process security and prolonged tool life The coated hardmetal grade WMP32G provides a balance between wear resistance and edge robustness, making it suitable for medium to robust cutting conditions. The coating technology contributes to thermal protection and reduced adhesion on the cutting edge, which helps to maintain dimensional accuracy over longer tool life. As a result, machining cycles become more consistent and predictable, supporting higher productivity on series production or batch work. Clear material guidance and application range Specified for the ISO M group, the insert is optimised for rostfreier Stahl; the grade selection and chipbreaker geometry target the common challenges of these alloys—high ductility, heat generation and tendency to form built-up edge. The technical design supports turning tasks where controlled material removal and repeatable surface finish are required, giving machine shops a reliable option for both roughing and semi-finishing stages in stainless applications. Practical integration and handling in the workshop The insert’s designation aligns with standard tool holders and mounting systems used in indexable turning, facilitating rapid changes and secure clamping. The TS16-EL28W family designation simplifies inventory management and grade selection across different turning cutters. Combined with Walter Tools’ manufacturing norms, the insert supports predictable toolset behaviour and easier process planning for production environments. Choose the Walter Tools TS16-EL28W WMP32G for robust rostfreier Stahl turning and contact Metav Werkzeuge for tailored application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-EL28W-WMP32G-WALTER Designation: TS16-EL28W WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Facts Material group: M Application standard: ISO 513 (group M) Chipbreaker: EL28W Grade: WMP32G Series: Tiger·tec Gold Special features Coating technology: Tiger·tec Gold Suitable for rostfreier Stahl Material: coated carbide (hardmetal) Optimised chipformer EL28W Intended for medium to robust cutting conditions FAQ What materials is this insert designed for? The TS16-EL28W WMP32G insert is designed for rostfreier Stahl and conforms to ISO group M material recommendations. How does the EL28W chipbreaker benefit machining? The EL28W chipformer promotes predictable chip shapes and evacuation, reducing built-up edge risk and improving cycle reliability when machining stainless grades. What does the Tiger·tec Gold designation mean? Tiger·tec Gold refers to Walter Tools’ coating and grade system combining thermal protection and wear resistance for consistent tool life in demanding applications. Is the insert suitable for finishing passes? The grade and geometry are optimised for medium to robust conditions; semi-finishing is supported, while fine finishing may require a geometry specifically intended for light-cut applications. How does this grade affect tool change intervals? The WMP32G grade and Tiger·tec Gold coating increase wear resistance and edge stability, which generally extends productive tool life and helps to lengthen intervals between index changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected brand names and trademarks remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanation; there is no affiliation between Metav Werkzeuge and the named brands. The offered product is an original, factory-new article from the manufacturer.
TS16-EL3.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger-tec Gold coating and the WMP32G grade for secure chip control and extended tool life; this indexable turning insert delivers consistent performance in stainless steel machining and can be ordered directly via Metav Werkzeuge or discussed with our technical consultants. TS16-EL3.0ISO WMP32G indexable turning insert – Tiger-tec Gold grade for stainless steel, Walter Tools The TS16-EL3.0ISO WMP32G is an indexable turning insert designed for machining rostfreier Stahl, optimised for medium to robust cutting conditions where secure chip formation and edge stability are required Tiger-tec Gold coating for increased wear resistance WMP32G: coated carbide grade for rostfreier Stahl EL3.0ISO chipbreaker for stable chip control Suitable for medium to heavy machining conditions Predictable performance on stainless steels The insert is developed to provide stable cutting behaviour when machining rostfreier Stahl (material group M). The combination of the WMP32G grade and the Tiger-tec Gold coating supports a secure chip formation and reduces the tendency for built-up edge, which is common in tough, heat-sensitive alloys. For operations where thermal load and material ductility create challenging conditions, the insert contributes to fewer interruptions and more consistent surface quality. In practical terms, this means fewer tool changes and more predictable cycle times on production runs. Controlled chips and reduced process risk The EL3.0ISO chipbreaker is engineered to shape chips into manageable forms, lowering the chance of entanglement and improving evacuation from the cutting zone. Reliable chip control helps to protect the workpiece and the machine, and it reduces post-process handling. For operators unfamiliar with chipbreaker terminology: the chipbreaker is the geometric feature on the insert that actively bends and breaks chips as they form. With this insert, the result is less manual intervention and a smoother production flow, particularly in turning operations with moderate to high feed rates. Coated carbide grade for longer tool life The cutting material is a coated carbide in the Tiger-tec Gold family, chosen for its balance between toughness and wear resistance in rostfreier Stahl applications. Coated grades are composed of a carbide substrate plus a multi-layer coating system that improves adhesion, hardness and thermal stability at the cutting edge. The outcome is a longer effective life of the cutting edge under the typical temperatures and stresses encountered when machining stainless steels. For manufacturers aiming to improve spindle uptime and repeatability, this insert represents a pragmatic upgrade without complex process changes. Contact Metav Werkzeuge for advice on integrating Walter Tools Tiger-tec Gold inserts into the workflow and to request availability for the TS16-EL3.0ISO WMP32G SKU Technical data Article number: TS16-EL3.0ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-EL3.0ISO WMP32G Walter Tools Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: EL3.0ISO Material group: M (rostfreie Stähle) Manufacturer: Walter Tools Facts No numerical specifications provided in the available data Special features Coating technology: Tiger-tec Gold Carbide type: coated carbide (WMP32G) Optimised for rostfreie Stähle (M group) Chip control geometry: EL3.0ISO Application: medium to robust turning conditions FAQ What materials is this insert designed for? The TS16-EL3.0ISO WMP32G insert is intended primarily for rostfreie Stähle (material group M) and is optimised to handle the toughness and thermal behaviour typical of those alloys. How does the EL3.0ISO chipbreaker benefit production? The EL3.0ISO chipbreaker on this insert shapes chips for reliable evacuation, reducing entanglement and machine stoppages, which improves process stability during turning operations. Is the WMP32G grade coated or uncoated? WMP32G is a coated carbide grade within the Tiger-tec Gold family; the coating enhances wear resistance and thermal stability for longer tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
TS16-EL32UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G carbide grade for reliable machining of stainless steel with controlled chip formation; the built‑in EL32UN chipbreaker supports stable cutting edges and consistent productivity. Order directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. TS16-EL32UN WMP32G — Indexable turning insert (EL32UN) for stainless steel, Walter Tools A high‑performance turning insert, the TS16-EL32UN WMP32G is engineered for secure chip control and repeatable edge life in machining stainless steel under medium to robust conditions. TS16-EL32UN WMP32G insert by Walter Tools Tiger·tec Gold coated carbide grade WMP32G Optimised EL32UN chipbreaker for stainless steel Suitable for medium to heavy machining conditions Consistent chip control for reliable production The combination of an optimised EL32UN chipbreaker and a coated carbide grade provides a predictable chip form when machining stainless steel, reducing the risk of built‑up edge and improving surface integrity. The chipbreaker’s geometry supports continuous chip evacuation, which lowers the likelihood of rework and tool interference. By favouring a stable chip flow, this insert helps to maintain consistent cycle times and reduces the need for frequent tool changes, which supports smoother production runs and higher overall equipment effectiveness. Coating and grade designed for tough materials The Tiger·tec Gold coating together with the WMP32G substrate delivers improved wear resistance and thermal stability during turning operations. Coated carbide means a thin protective layer that lowers adhesion and heat build‑up at the cutting zone, so the tool keeps a sharper cutting edge for longer. For workshops transitioning from general‑purpose grades, this specification offers a clear performance step when working with ductile and heat‑sensitive alloys, allowing operators to extend tool life without sacrificing surface finish or dimensional accuracy. Process security and machining benefits Adopting an insert with this configuration promotes process security through repeatable edge behaviour and robust tolerance maintenance. The insert’s construction supports steady cutting forces and reduces chatter tendencies in routine turning tasks. For production environments where batch consistency matters, the result is fewer rejects and more predictable tool‑change intervals. This efficiency translates into practical time savings on set‑ups and downstream operations, helping to reduce overall cycle costs while maintaining high quality standards. Practical application and toolholder integration The insert is compatible with standard turning toolholders that accept the TS16 geometry and the EL32UN chipbreaker form, enabling straightforward integration into existing toolsets. When replacing conventional grades with this solution, modest parameter adjustments—typically a slight reduction in feed or finishing pass correction—can unlock better edge stability and longer life. The technical design is particularly suited to operations that balance moderate material removal rates with the need for dependable surface quality on stainless steel components. For machining advice tailored to specific turning tasks with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for a concise application consultation and delivery options. Technical Data Article number: TS16-EL32UN-WMP32G-WALTER Designation: TS16-EL32UN WMP32G Type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL32UN Material group: M (stainless steel) Special features Coated carbide grade for improved wear resistance Optimised chip control geometry Designed for medium to robust machining conditions Suitable for stainless steel machining according to ISO groups FAQ What materials is this insert suitable for? The TS16-EL32UN WMP32G turning insert is specified for stainless steel (ISO group M) and is tailored to handle the toughness and heat sensitivity typical of those alloys. How does the EL32UN chipbreaker improve performance? The EL32UN chipbreaker produces a controlled chip form that aids evacuation and reduces built‑up edge, so the TS16-EL32UN WMP32G insert maintains a stable cutting edge and consistent surface quality. Is Tiger·tec Gold coating beneficial for batch production? Yes, the Tiger·tec Gold coating on the WMP32G grade increases thermal stability and wear resistance, supporting longer tool life and more predictable tool‑change intervals in series production. Can this insert be used in existing toolholders? The TS16 geometry and EL32UN chipbreaker are compatible with standard holders designed for this insert family; minor cutting parameter adjustments are recommended to optimise edge performance. What practical gains can be expected in everyday use? Users typically observe improved process security, fewer reworks due to edge build‑up, and reduced variation in surface finish when using the TS16-EL32UN WMP32G insert on stainless steel components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand presentation: Walter Tools) is part of the Sandvik group and is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
TS16-ER-A55 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the ER‑A55 chipbreaker for consistent chip control and extended edge stability; order the TS16-ER-A55 WMP32G directly via Metav Werkzeuge or consult our technical team for machining setup. TS16-ER-A55 WMP32G indexable turning insert — Tiger·tec Gold coating, ER‑A55 chipbreaker (Walter Tools) A TS16-ER-A55 WMP32G indexable turning insert designed for dependable performance in medium to robust stainless steel machining applications Tiger·tec Gold coating technology ER‑A55 chipbreaker for secure chips Optimised for stainless steel (ISO M) Stable cutting edge and consistent life Faster, more reliable turning through advanced coating and chip control The combination of Tiger·tec Gold technology with the WMP32G grade delivers a clearly improved balance between wear resistance and toughness for machining stainless steel. The ER‑A55 chipbreaker is engineered to produce manageable chips under varying cutting conditions, reducing rework and interruptions. As an indexable turning insert, this configuration supports longer tool cycles and fewer index changes, which translates into measurable productivity gains on batch and continuous turning operations. The coating technology also helps to reduce built-up edge formation, improving surface finish and process stability. Edge stability and repeatable performance for demanding steel grades Designed specifically for ISO group M materials, the insert provides a stable cutting edge that withstands the thermal and mechanical stresses typical of stainless steel turning. The WMP32G grade is a coated carbide optimised for applications that require a balance of wear resistance and fracture toughness; this helps maintain dimensional accuracy over extended tool life. The result is consistent component quality with predictable tool-change intervals, supporting production planning and cost calculations in a shop-floor environment. Practical application advice and machining benefits In practice, the insert performs well in medium-to-robust cutting regimes where secure chip formation is essential. The ER‑A55 chipbreaker produces short, controllable chips that lower the risk of entanglement and make downstream handling easier. For operators accustomed to coated carbide grades, the Tiger·tec Gold family offers familiar handling while delivering improved process security in tougher stainless-steel alloys. When specifying tooling, consider the workpiece material, cutting data and fixture rigidity to fully exploit the insert’s consistent tool life and cutting-edge reliability. For tailored guidance on integrating Walter Tools Tiger·tec Gold inserts into production, contact Metav Werkzeuge — our technical consultants will assess suitability and recommend cutting parameters and insert variants. Technical data Article number: TS16-ER-A55-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-ER-A55 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Facts Material group: M (stainless steel) Series: Tiger·tec Gold Chipbreaker: ER‑A55 ISO designation: TS16-ER-A55 WMP32G Angle: 55° Suitable for stainless steel: Yes Special features Coating: Tiger·tec Gold (coated carbide) Grade: WMP32G Application: medium to robust stainless steel machining Benefit: secure chip control and stable cutting edge UID: TS16-ER-A55-WMP32G-WALTER FAQ Which materials is this insert best suited for? The TS16-ER-A55 WMP32G is optimised for stainless steel (ISO group M); the WMP32G grade and Tiger·tec Gold coating provide a balance of wear resistance and toughness for these alloys. What advantage does the ER‑A55 chipbreaker provide? The ER‑A55 chipbreaker promotes short, controlled chips and reliable evacuation, improving process security and reducing downtime associated with chip-related issues when using Walter Tools inserts. Is this insert suitable for finishing and roughing operations? The insert is tailored for medium to robust cutting conditions; it performs well across a range of turning tasks, offering repeatable quality in both semi-finishing and tougher roughing passes depending on cutting data and setup. How does the Tiger·tec Gold coating affect tool life and surface finish? The Tiger·tec Gold coating enhances wear resistance while maintaining edge integrity, which supports longer tool life and more consistent surface quality on stainless-steel components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods from the manufacturer.
TS16-ER-A60 WMP22G Wendeplatten - Walter Tools
Built for demanding turning operations on rostfreier Stahl, the Tiger‑tec Gold‑coated WMP22G grade delivers stable chip formation and extended edge life; pair these benefits with the ER‑A60 chipbreaker for reliable process security. Order the insert directly via Metav Werkzeuge or consult their experts for application-specific setup. TS16-ER-A60 WMP22G — Tiger‑tec Gold coated indexable turning insert for rostfreier Stahl | Walter Tools The TS16-ER-A60 WMP22G is an indexable turning insert engineered for machining rostfreier Stahl in medium to robust cutting conditions, combining a coated carbide grade with a dedicated chipbreaker geometry for predictable performance. Tiger‑tec Gold coating for longer tool life Optimised for rostfreier Stahl machining Coated carbide grade WMP22G for stable edges Reliable performance for challenging rostfreier Stahl The combination of the Tiger‑tec Gold coating and the WMP22G carbide grade is aimed at turning operations where material toughness and heat build‑up can cause built‑up edge and unstable chips. The specific microstructure of the coated grade supports stable cutting edges, which reduces flank wear and helps maintain dimensional accuracy over longer tool life. For users unfamiliar with indexable systems: this insert sits in a compatible toolholder and provides repeatable cutting geometry, so set‑up times are reduced and reproducible surface finishes are easier to achieve. Coating and geometry that extend productivity The Tiger‑tec Gold technology provides a multilayer physical coating that improves heat resistance and adhesion, supporting higher process reliability when machining rostfreier Stahl. The ER‑A60 chipbreaker is designed to control chip form under the material group M (ISO 513), turning long or ductile chips into manageable segments and thus lowering the risk of surface damage or machine downtime. In practical terms, choosing a coated carbide insert with this chipbreaker typically allows slightly more aggressive feeds without sacrificing surface quality, which leads to improved productivity on both single‑part and batch work. Practical selection and application guidance for consistent results When selecting an indexable insert for stainless steels, focus on the coating, grade and chipbreaker combination rather than only the cutting edge radius. The TS16-ER-A60 WMP22G is suited to medium and robust cutting scenarios and offers a balance between edge stability and wear resistance. For machines with stable rigidity and conventional coolant supply, the insert supports consistent surface finish and predictable tool life. For atypical setups or unfamiliar alloys, verify cut depths and feed rates in a short trial cut to establish optimal parameters before full production. For technical advice or to order the TS16-ER-A60 WMP22G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application requirements and delivery options Technical Data Article number: TS16-ER-A60-WMP22G-WALTER Product: Indexable turning insert (turning) Manufacturer: Walter Tools Grade: WMP22G Series: Tiger‑tec Gold Facts Material group: M (rostfreie Stähle) Chipbreaker: ER‑A60 ISO designation: TS16-ER-A60 WMP22G Special features Coated carbide grade WMP22G Tiger‑tec Gold coating technology Optimised chip control for rostfreier Stahl Designed for medium to robust cutting conditions FAQ Which materials is this insert suitable for? The TS16-ER-A60 WMP22G is specified for the ISO material group M, meaning primarily for machining rostfreier Stahl; the WMP22G grade supports secure chip formation and edge stability in these alloys. What advantages does Tiger‑tec Gold provide? Tiger‑tec Gold enhances heat resistance and coating adhesion, improving wear performance of the WMP22G grade and supporting longer tool life and consistent surface quality in turning operations. What role does the ER‑A60 chipbreaker play? The ER‑A60 chipbreaker shapes and controls chip flow to prevent long, stringy chips typical of ductile stainless steels, which reduces the risk of surface damage and eases chip handling. Is this insert suitable for hardened steels? No, the TS16-ER-A60 WMP22G is optimised for rostfreier Stahl under medium to robust conditions and is not intended for high‑hardness turning applications. How does the ISO designation relate to use? The ISO designation TS16-ER-A60 WMP22G identifies the insert geometry, chipbreaker and grade; the material group M confirms suitability for rostfreie Stähle per ISO 513. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-ER-A60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a coated‑carbide grade tuned for stainless steel that delivers stable chip formation and long edge life; combine these properties with the proven ER‑A60 chipbreaker for consistent productivity. Order directly via Metav Werkzeuge or consult the team for application advice. TS16-ER-A60 WMP32G indexable turning insert – Tiger‑tec Gold, for stainless steel (Walter Tools) The TS16-ER-A60 WMP32G is a coated carbide indexable insert from the Tiger‑tec Gold series, optimised for reliable turning of stainless steel under moderate to robust cutting conditions. Tiger‑tec Gold coated carbide ER‑A60 optimised chip control Suitable for stainless steel (M) Stable cutting edge and long tool life Increase throughput when machining stainless steel with fewer interruptions The combination of the WMP32G grade and the Tiger‑tec Gold coating targets the specific challenges of machining stainless steel: high ductility, heat generation and tendency to form built‑up edge. The coating technology supports a stable cutting edge, which reduces unscheduled tool changes and maintains consistent part finish. In practice, this translates into higher machine uptime and improved process reliability for batch and production turning operations. The material classification M denotes suitability for a broad range of rostfreie Stähle, ensuring the cutting material is matched to the workpiece behaviour. Controlled chips and surface quality from optimised geometry The ER‑A60 chipbreaker geometry is designed to promote secure chip formation in demanding stainless steel applications. By encouraging predictable chip breakage and evacuation, the insert reduces risk of chip entanglement and surface damage, contributing to a repeatable component finish. A steady chip flow also aids coolant and machine tool effectiveness, so operators see fewer interventions and more consistent cycle times. The result is reproducible surface integrity and fewer rejects in serial production. Clear selection and straightforward integration into existing toolholders As an indexable turning insert, this grade integrates directly into standard turning toolholders compatible with the TS16 designation. The code and ISO designation provide clarity when specifying inventory: TS16‑ER‑A60 WMP32G. For shops refining their tool sets, the insert’s focus on process security simplifies grade selection for stainless steel tasks and reduces the need for bespoke testing. When in doubt about fitment or cutting data, Metav Werkzeuge can advise on holder compatibility and recommended cutting parameters for the specific stainless steel grade in use. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and reliable supply of Walter Tools Tiger‑tec Gold inserts Technical data Article number: TS16-ER-A60-WMP32G-WALTER Type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER‑A60 Material group: M (stainless steel) Core data Designation: TS16-ER-A60 ISO designation: TS16-ER-A60 WMP32G Applicable material group: M Special features Coating technology: Tiger‑tec Gold Coated carbide grade Suitable for rostfreie Stähle Supports stable chip formation and cutting edge Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TS16‑ER‑A60 WMP32G insert is specified for machining stainless steel (material group M) and is formulated to support secure chip formation in those alloys. Which chipbreaker is fitted and what does it do? The insert uses the ER‑A60 chipbreaker; this geometry promotes controlled chip formation and evacuation during turning operations in stainless steel, improving surface quality and process stability. Is this insert compatible with standard TS16 toolholders? Yes, the TS16 designation indicates compatibility with toolholders designed for TS16 inserts; confirm holder specifics with Metav Werkzeuge for a precise match. Manufacturer: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation or partnership implied between our company and the named brands. The offered item is an original, factory‑new product from the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com