VCGT110302-FM2 WSM20S T Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WSM20S grade for reliable machining of stainless steels and heat‑resistant superalloys; the FM2 chipbreaker supports stable chip formation and consistent surface quality. Order the insert directly via Metav Werkzeuge or contact our advisors for application support. VCGT110302-FM2 WSM20S — Turning indexable insert, Tiger·tec Silver by Walter Tools The VCGT110302-FM2 WSM20S is a rhombic 35° turning insert designed for secure chip control and dependable performance when machining stainless steels and high‑temperature alloys. Turning insert »VCGT110302-FM2 WSM20S« by Walter Tools Tiger·tec Silver grade for high process stability FM2 chipbreaker for controlled chip formation Rhombic 35°, 7° relief, 0.2 mm corner radius High process stability for demanding materials The combination of a coated carbide substrate and the Tiger·tec Silver coating delivers thermal resistance and wear control that reduce flank wear and edge build‑up when working with tough materials. The WSM20S grade is formulated for operations in the ISO M and S groups, which means it is suited to stainless steels and heat‑resistant superalloys where cutting temperatures and adhesion tendencies are high. This results in longer tool life, fewer interruptions for index changes and a more predictable machining process in production environments. Consistent chip control and improved surface quality A dedicated FM2 chipbreaker and the rhombic 35° geometry combine to produce short, controllable chips in many turning conditions, lowering the risk of entanglement and workpiece damage. The small 0.2 mm corner radius supports fine finishing and dimensional stability on critical diameters, while the 7° relief helps maintain a sharp contact angle for repeatable surface integrity. Together these features enable efficient finishing passes and fewer downstream operations to meet tolerance and surface‑finish requirements. Production-ready handling and process integration Tolerance class G and the standard insert form ensure compatibility with a wide range of toolholders used in CNC turning. The insert’s execution code and format simplify tool management: indexing is straightforward, inventory handling is standardised and the modest clearance requirements reduce set‑up time. For workshops seeking to improve throughput, the insert offers a balance of stable cutting performance and handling convenience that supports reliable cycle times and predictable tool consumption. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate support and availability. Technical Data SKU: VCGT110302-FM2-WSM20S-WALTER Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S ISO designation: VCGT110302-FM2 WSM20S Facts Relief angle: 7° Corner radius: 0.2 mm Plate form: Rhombic 35° Plate size: 11 Thickness code: 03 Tolerance class: G Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Chipbreaker: FM2 Material suitability: Stainless steels (M), Superalloys/Titanium (S) Execution: T Stable chip formation and good edge stability Designed for productive turning applications FAQ What materials is this insert suitable for? The VCGT110302-FM2 WSM20S insert (Walter Tools) is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys or titanium alloys. Which chipbreaker does the insert use and what is the benefit? This turning insert features the FM2 chipbreaker; it promotes short, controllable chips and improves process stability, reducing the risk of chip entanglement and enhancing surface finish. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating increases thermal resistance and wear protection on the coated carbide base, leading to longer tool life and fewer index changes in continuous machining. What are the key geometric data for tool selection? Key data for holders and set‑up: rhombic 35° shape, relief angle 7°, corner radius 0.2 mm, plate size 11 and thickness code 03; tolerance class G ensures interchangeability. Can this insert be used for finishing operations on stainless steel? Yes — the small corner radius and rhombic geometry support fine finishing passes on stainless steel components while maintaining dimensional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
VCGT110302-FN2 WN10 Wendeplatten - Walter Tools
Combine the WN10 uncoated carbide grade with the FN2 chipbreaker and a 0.2 mm corner radius for stable chip formation and repeatable turning results; order directly via Metav Werkzeuge or consult our specialists for application support. VCGT110302-FN2 WN10 Indexable turning insert, Rhombic 35°, FN2 — Walter Tools VCGT110302-FN2 WN10 is an indexable insert designed for general turning applications, offering an uncoated carbide grade and a compact 35° rhombic geometry for versatile machining Uncoated carbide grade WN10 Rhombic 35° geometry Chipbreaker type FN2 0.2 mm corner radius and 7° clearance Predictable chip control for stable productivity The combination of the uncoated carbide WN10 grade with the FN2 chipbreaker delivers stable chip formation, reducing the risk of entanglement and enabling consistent material evacuation. This leads to fewer interruptions and a smoother production flow when machining with an indexable turning insert. The FN2 chipbreaker is designed to manage chips in medium-to-light turning operations; when selecting cutting parameters, consult the product matrix to verify material suitability and optimise tool life. Geometry engineered for repeatable edge performance The rhombic 35° form and a 0.2 mm corner radius provide a balance between edge strength and accessibility in tight contours. A 7° clearance angle supports reduced rubbing at the flank face, improving surface finish and helping to maintain dimensional accuracy. The specified tolerance G assures consistent fitment in standard toolholders; understanding these dimensions helps to predict cutting behaviour and achieve reproducible results across batches. Shop-floor compatibility and practical handling With the VCGT110302-FN2 WN10 designation and compact dimensions (size 11, thickness 03), the insert integrates easily into common turning toolholders and indexable systems. The uncoated carbide substrate offers a cost-effective option for series production where coated grades may not be required; check the series description for the open Walter grade and confirm the intended workpiece material via the product matrix. Clear identification and consistent geometry simplify inventory management and reduce setup time on the shop floor. For tailored recommendations on Walter Tools inserts such as the VCGT110302-FN2 WN10, contact Metav Werkzeuge for expert application advice — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data SKU: VCGT110302-FN2-WN10-WALTER Designation: VCGT110302-FN2 WN10 Product type: indexable turning insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core specifications Clearance angle: 7° Corner radius: 0.2 mm Geometry: Rhombus 35° Insert size: 11 Thickness: 03 Tolerance class: G Material & features Grade: WN10 (uncoated carbide) Chipbreaker: FN2 Execution: T Series note: check product matrix for workpiece suitability FAQ What materials is this insert suitable for? The WN10 grade of the VCGT110302-FN2 WN10 is an uncoated carbide; material suitability should be checked against the product matrix to determine the best workpiece applications. What does the FN2 chipbreaker provide? The FN2 chipbreaker on this indexable turning insert promotes controlled chip formation and evacuation, improving process stability during common turning operations. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius increases edge strength compared with a smaller radius, helping to reduce edge chipping while maintaining accessibility for finishing passes with the VCGT110302-FN2 WN10. Is the 35° rhombic geometry suitable for profiling? The rhombic 35° geometry offers good access to grooves and profiles; its shape supports a mix of general turning tasks while maintaining a reliable cutting edge. What does the tolerance class G mean for fitment? Tolerance class G indicates the manufacturing tolerance for this insert series, ensuring consistent seating and interchangeability in compatible toolholders. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no connection between our company and the mentioned brands. The offered article is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
VCGT110302-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WNN10, precise FN2 chip control and the compact 0.2 mm corner radius for reliable finishing and predictable machining cycles; order the VCGT110302-FN2 WNN10 insert directly via Metav Werkzeuge or contact the consultants for cutting data and application advice. VCGT110302-FN2 WNN10 turning insert by Walter Tools — coated carbide grade with FN2 chipbreaker VCGT110302-FN2 WNN10 is a rhombic 35° turning insert intended for general turning and finishing tasks in a wide range of workpiece materials, delivering consistent chip formation and stable edge performance Coated carbide grade WNN10 FN2 chipbreaker for stable chips Rhombic 35° form for versatile turning 0.2 mm corner radius for fine finishes Predictable chip control that improves cycle stability The engineered FN2 chipbreaker provides reliable chip formation across varying cut depths, which results in fewer interruptions and smoother automatic chip evacuation. By combining the chip control with the WNN10 coated carbide grade, the insert offers a balance between wear resistance and toughness that supports longer tool life and fewer tool changes. This leads to measurable productivity gains in batch production and helps maintain steady cycle times on turning centres. Geometry that delivers improved surface quality and accuracy The rhombic 35° geometry with a 0.2 mm corner radius is designed for finishing and semi-finishing passes where surface integrity matters. The modest corner radius reduces the cutting forces while still allowing for a fine surface finish, particularly on external diameters and light profiling work. The 7° clearance angle aids in reducing rubbing and heat build-up, which contributes to repeatable dimensional accuracy and reduced rework. Economical choice for versatile workshop use Assigned to tolerance class G and produced as part of the Walter Schneidstoffsorte series, this insert is suitable for a range of turning operations where coated hardmetal is preferred. The balanced specifications make it a practical selection for jobbing shops and production environments seeking a universal insert that performs consistently across varying steels and non-ferrous materials. The compact size and standard form factor simplify inventory management and help control tooling costs without sacrificing process reliability. Integration, technical data and support for process planning The insert’s standard format and familiar designation make it straightforward to implement in existing toolholders designed for VCGT-style shapes. For detailed cutting recommendations or to verify material suitability for a specific application matrix, Metav Werkzeuge provides technical support and cutting data sheets. If additional information is required, engineering support is available via email or phone to assist with feeds, speeds and mounting considerations. Contact Metav Werkzeuge for tailored cutting data and to discuss how the VCGT110302-FN2 WNN10 insert can be specified for current turning operations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: VCGT110302-FN2-WNN10-WALTER Designation: VCGT110302-FN2 WNN10 Manufacturer: Walter Tools Shape: Rhombic 35° Corner radius: 0.2 mm Thickness code: 03 Clearance angle: 7° Chipbreaker: FN2 Tolerance class: G Core specifications Insert size: 11 mm Corner radius: 0.2 mm Clearance angle: 7° Thickness code: 03 Tolerance: G Materials and features Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: FN2 Form: Rhombic 35° Execution: T FAQ What materials is this insert suitable for? The VCGT110302-FN2 WNN10 insert is a coated carbide grade intended for broad workshop use; suitability for specific materials should be checked against the product matrix and cutting data provided by Walter Tools. How does the FN2 chipbreaker influence machining? The FN2 chipbreaker provides controlled chip formation and evacuation, which helps maintain steady machining cycles and reduces interruptions during turning operations with this Walter Tools insert. Can the insert be used for finishing passes? Yes, the rhombic 35° form and 0.2 mm corner radius are aimed at finishing and semi-finishing tasks where a fine surface quality and dimensional repeatability are required. Where to get process data or help with feeds and speeds? Process recommendations and cutting data for the VCGT110302-FN2 WNN10 insert are available through Metav Werkzeuge; technical assistance can be requested by email or telephone. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
VCGT110302-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of the WSM01 grade and the Tiger‑tec Silver series to secure stable chip control and extended tool life when machining demanding materials; the precise Rhombus 35° geometry and MM4 chipbreaker support consistent surface quality and process reliability. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. VCGT110302-MM4 WSM01 — Indexable turning insert, Rhombus 35°, 7° clearance — Walter Tools The VCGT110302-MM4 WSM01 is a rhombic 35° indexable turning insert designed for secure and efficient machining of stainless steels and heat‑resistant superalloys in demanding turning operations Tiger‑tec Silver coated carbide grade WSM01 Optimised MM4 chipbreaker for stable chips Rhombus 35° form with 0.2 mm corner radius Suitable for stainless and heat‑resistant alloys High‑temperature performance for difficult materials The WSM01 grade, part of the Tiger‑tec Silver family, is a coated carbide formulation engineered to resist thermal loading and maintain a cutting edge when working with rostfreier Stahl and heat‑resistant superalloys. In practice, this means improved resistance to built‑up edge and a reduced tendency for flank wear under elevated temperatures. For users, the result is a more predictable tool life and fewer unscheduled insert changes, which supports higher machine utilisation and lowers effective cost per part. The grade’s coating technology enhances oxidation and abrasion resistance, translating directly into greater stability during medium to demanding machining conditions. Geometry and edge design that secure surface quality The Rhombus 35° form with a 0.2 mm corner radius and a 7° clearance angle balances cutting edge strength and access for profile work. The relatively small corner radius supports fine surface finishes and accurate dimensional control in finishing passes, while the clearance angle reduces rubbing on the flank during interrupted cuts. The MM4 chipbreaker is optimised for secure chip formation when machining tough materials: it breaks chips into manageable segments, prevents long stringing chips and improves coolant penetration at the cutting zone. These geometric choices mean fewer reworks and consistent part quality across batches. Productivity and process security in everyday turning Applied in turning operations where stainless steels and heat‑resistant alloys are frequent, this insert delivers measurable gains in process reliability. The combination of grade and chip control reduces tool changes and stabilises cycle times, supporting predictable throughput. Compatibility with standard indexable toolholders allows easy integration into existing tool sets without extra setup effort. For production environments where repeatability and surface integrity matter, the insert helps to safeguard against common issues such as work hardening or poor chip evacuation, thereby contributing to steady, cost‑effective machining. For tailored advice on using the Tiger‑tec Silver WSM01 insert in specific turning applications, contact Metav Werkzeuge for an expert recommendation — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCGT110302-MM4-WSM01-WALTER Designation: VCGT110302-MM4 WSM01 Type: Indexable turning insert (drehwendeschneidplatte) Brand: Walter Tools Series: Tiger‑tec Silver Facts Size: 11 Thickness: 03 Corner radius: 0.2 mm Clearance angle: 7° Insert form: Rhombus 35° Tolerance class: G Special features Grade: WSM01 (coated carbide) Chipbreaker: MM4 Material application: rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) Edge geometry optimised for finishing and medium cuts Suitable for demanding and heat‑loaded turning operations FAQ Which materials is this insert suitable for? The VCGT110302‑MM4 WSM01 insert from Walter Tools is designed for rostfreier Stahl (stainless steels) and heat‑resistant superalloys/titanium, reflecting the S / M designation of the grade. What does the MM4 chipbreaker do? The MM4 chipbreaker on this insert controls chip shape and size to avoid long, stringing chips and to improve coolant reach at the cutting edge, enhancing process reliability and surface finish. How does the 0.2 mm corner radius affect the cut? A 0.2 mm corner radius increases edge strength while still allowing fine surface finishes; it is particularly useful for finishing and light‑to‑medium turning where dimensional accuracy is required. Is this insert compatible with standard toolholders? Yes, the VCGT110302‑MM4 WSM01 insert uses a common rhombic 35° indexable shape and fits toolholders designed for VCGT inserts, enabling straightforward integration into existing setups. AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
VCGT110302-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the MM4 chipbreaker and a compact Rhombic 35° geometry for reliable machining of stainless steel and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult our specialists for material‑specific application advice. VCGT110302-MM4 WSM20S indexable turning insert — Walter Tools, Rhombic 35°, Tiger·tec Silver VCGT110302-MM4 WSM20S is an indexable turning insert designed for demanding turning applications in stainless steel and superalloys Tiger·tec Silver coating for heat resistance and longer life MM4 chipbreaker for stable chip formation Rhombic 35° geometry for versatile external turning 0.2 mm corner radius for controlled finish and strength High process reliability and extended tool life through coating and grade The combination of the Tiger·tec Silver coating and the WSM20S grade provides enhanced thermal resistance and wear behaviour for demanding turning tasks. The coated cemented‑carbide formulation is optimised for poor heat conduction materials: it reduces adhesion and supports stable cutting edges during intermittent and continuous cuts. As a result, tool life is extended and unplanned tool changes are reduced, improving throughput in batch production and high‑mix environments. Secure chip control and consistent surface quality Equipped with the MM4 chipbreaker and a 0.2 mm corner radius, this insert delivers predictable chip formation and consistent surface finishes. The Rhombic 35° shape favours a balanced approach between strength and accessibility, allowing effective engagement on external diameters and shoulder turning. Where surface integrity matters, the geometry helps maintain dimensional stability while avoiding excessive cutting forces that can lead to chatter. Suitable for stainless steel and high‑temperature alloys (ISO M & S) The insert is tailored to machine materials classified in ISO groups M and S, notably stainless steel and heat‑resistant superalloys or titanium. These materials tend to work‑harden and generate higher temperatures at the cutting zone; the Tiger·tec Silver technology and robust grade selection support secure chip evacuation and edge retention under these conditions. For customers transitioning from conventional grades, the result is fewer built‑up edges and reduced rework. Practical benefits for production workflows Compact sizing and a proven insert form simplify tool indexing and inventory management. The VCGT110302‑MM4 WSM20S insert can be integrated into existing toolholders that accept VCGT‑style inserts, offering an immediate performance upgrade without extensive requalification. Production managers benefit from consistent reproducibility, lower reject rates and a dependable option for mixed‑material machining lists. For application assistance, grade selection or to discuss suitable toolholder pairings for this Walter Tools insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical advisors will propose the optimal setup for stainless steel and superalloy turning. Technical data Article number: VCGT110302-MM4-WSM20S-WALTER SKU: VCGT110302-MM4-WSM20S-WALTER Designation: VCGT110302-MM4 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Facts Insert size: 11 Thickness designation: 03 Clearance angle: 7° Corner radius: 0.2 mm Geometry: Rhombic 35° Chipbreaker: MM4 Tolerance class: G Special features Coating: Tiger·tec Silver Grade: WSM20S (coated cemented carbide) Application groups: M (stainless steel), S (heat‑resistant superalloys / titanium) Intended use: external turning, finishing and medium machining duties Manufacturer: Walter Tools FAQ Which materials are recommended for this insert? The VCGT110302‑MM4 WSM20S insert from Walter Tools is intended for stainless steel and heat‑resistant superalloys (ISO groups M and S), where thermal stability and edge security are required. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker delivers consistent chip control and reduces the risk of built‑up edge when turning tough materials; this improves surface finish and decreases downtime for chip‑related issues on Walter Tools inserts. What surface quality can be expected with the 0.2 mm corner radius? A 0.2 mm corner radius balances edge strength and finish capability, enabling good surface integrity in finishing passes while maintaining sufficient robustness for slight interruptions. Is this insert suitable for both continuous and interrupted cuts? Yes — the coated grade and the Rhombic 35° form are designed to cope with a range of cutting conditions, including moderate intermittent cuts typical in external turning operations. Manufacturer/Responsible: Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT110302-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of economical, consistent turning with the combination of an MN2 chipbreaker and uncoated WN10 cemented carbide for reliable chip control and good edge stability; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. VCGT110302-MN2 VCGT110302-MN2 WN10 – Indexable turning insert, MN2 chipbreaker, Rhombus 35° (Walter Tools) A VCGT110302-MN2 WN10 indexable turning insert designed for general turning applications, offering a Rhombus 35° geometry and an MN2 chipbreaker to support controlled chip formation. Rhombic 35° insert geometry 7° clearance angle for profile control 0.2 mm corner radius for fine finishes MN2 chipbreaker, uncoated WN10 grade Efficient cutting performance through controlled chip formation The combination of an MN2 chipbreaker with an uncoated cemented carbide WN10 grade provides a balance between reliable chip control and predictable tool life. This configuration is focused on productive turning where consistent chip shape reduces interruptions and tool-change frequency. The insert’s Rhombic 35° geometry supports versatile turning operations, offering a compromise between strength and accessibility for profiles. The result is measurable improvement in process stability and a reduction in cycle-time fluctuations. Geometry and edge definition for improved surface quality A 0.2 mm corner radius together with a 7° clearance angle influences the contact conditions at the tool–workpiece interface: the corner radius moderates cutting-edge engagement to produce a finer surface finish, while the clearance angle reduces rubbing and heat build-up. These geometric parameters make this insert suitable for operations that demand a balance of dimensional control and surface integrity. The insert form and edge preparation are designed to help maintain repeatability across batches and to support predictable finishing results. Material specification and selection guidance The cutting material is specified as WN10, an uncoated cemented carbide grade supplied within Walter Tools’ open series. This means the substrate is optimised for general-purpose turning; however, the exact workpiece material suitability should be verified against the manufacturer’s product matrix. The insert has a tolerance class of G, a plate size designation of 11, and a plate thickness code 03, which are relevant criteria when matching the insert to holders and tool geometries. For mixed or specialised materials, consult the compatibility matrix before selection. Practical considerations for workshop integration The insert’s execution code T and its ISO designation are convenient for rapid identification and stocking. Using indexable inserts with reliable chip control supports higher uptime and simplifies regrinding logistics, as edges are replaced rather than reconditioned. For shops looking to standardise tooling, this turning insert integrates well into modular tooling systems and can contribute to streamlined inventory management while maintaining consistent part quality. For application-specific recommendations, availability and swift procurement of Walter Tools turning inserts contact Metav Werkzeuge for tailored advice and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VCGT110302-MN2-WN10-WALTER Designation: VCGT110302-MN2 ISO designation: VCGT110302-MN2 WN10 Grade / series: WN10 / Walter Schneidstoffsorte - Serie offen Execution: T Facts Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Rhombus 35° Plate size: 11 Plate thickness: 03 Tolerance class: G Special features MN2 chipbreaker Uncoated cemented carbide (WN10) Indexable turning insert Application note: Check material suitability in product matrix FAQ What materials is the WN10 grade suited for? The WN10 grade is an uncoated cemented carbide; material suitability should be verified using Walter Tools’ product matrix for the VCGT110302-MN2 WN10 insert. How does the MN2 chipbreaker influence machining? The MN2 chipbreaker promotes consistent chip formation and evacuation, helping to maintain process stability and reduce interruptions during turning operations. What does the 35° rhombic shape mean for tool access? A Rhombus 35° geometry offers good access for profiling and allows favourable cutting-edge contact conditions while retaining edge strength for a variety of turning tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
VCGT110302-MN2 WNN10 Wendeplatten - Walter Tools
Benefit from a combination of reliable chip control, a durable coated carbide grade and a compact rhombic geometry for consistent turning performance; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application advice. VCGT110302-MN2 WNN10 — Turning insert (Rhombic 35°, MN2 chipbreaker) by Walter Tools VCGT110302-MN2 WNN10 is a coated carbide turning insert engineered for general-purpose and finishing turning operations, offering a balanced mix of wear resistance and chip control for industrial machining. Reliable coated carbide grade WNN10 MN2 chipbreaker for stable chip control Rhombic 35° shape for versatile turning 0.2 mm corner radius for fine surface finishes Consistent chip control that reduces interruptions The combination of a coated carbide grade and the MN2 chipbreaker delivers predictable chip formation across a broad range of materials. The chipformer geometry is designed to break and evacuate chips reliably, which lowers the risk of recutting and machine stoppages. For process engineers this means fewer unplanned interruptions, improved cycle stability and more consistent part quality. The insert’s edge preparation supports repeatable performance in batch production while the coating improves wear resistance under mixed cutting conditions. Geometry and edge definition for dependable surface quality A rhombic 35° shape with a 0.2 mm corner radius provides a compromise between versatility and fine finishing capability. The geometry enables accessible approach angles for external and shoulder turning while the small corner radius helps achieve controlled cutting forces and attractive surface finishes on turned components. The moderate relief angle supports dimensional stability at typical cutting depths, making the component suitable for workshops seeking predictable results without complex tooling changes. Practical benefits for workshop productivity and tool management The insert is supplied in the standard identification VCGT110302-MN2 WNN10, which simplifies tool selection and inventory tracking. The coated grade is intended to balance tool life and process reliability, reducing regrinds and inventory turnover. For production managers, these characteristics translate into higher uptime, consistent tolerance achievement and fewer tool change cycles — all contributing to measurable productivity gains on the shop floor without the need for special holders or process overhauls. Order genuine Walter Tools inserts via Metav Werkzeuge for assured process reliability — contact the Metav Werkzeuge team for application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VCGT110302-MN2-WNN10-WALTER Designation: VCGT110302-MN2 WNN10 Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Plate size: 11 Plate thickness: 03 Relief angle: 7° Corner radius: 0.2 mm Tolerance class: G Special features Coated carbide grade WNN10 Chipbreaker: MN2 Plate form: Rhombus 35° Execution: T Material: Katalogabhängig FAQ What materials is this insert intended for? The VCGT110302-MN2 WNN10 insert features a coated carbide grade and is intended for a broad material spectrum; specific material suitability should be checked against the product matrix for the WNN10 grade. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on this turning insert promotes stable chip formation and reliable evacuation, which helps to reduce recutting and maintain consistent cycle times during turning operations. Is the rhombic 35° geometry suitable for finishing work? Yes — the rhombic 35° form combined with a 0.2 mm corner radius supports fine surface finishes while retaining versatility for general turning tasks. How should tool managers identify this insert in stock systems? Use the designation VCGT110302-MN2 WNN10 and the SKU VCGT110302-MN2-WNN10-WALTER for accurate ordering and inventory control Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods from the manufacturer (Walter Tools).
VCGT110302FS-1 WDN10 Wendeplatten - Walter Tools
Benefit from the combination of a wear‑resistant PKD grade WDN10, precise 7° clearance and a fine 0.2 mm corner radius to achieve consistent finishes and extended tool life in demanding non‑ferrous and abrasive applications; order the VCGT110302FS-1 WDN10 directly via Metav Werkzeuge or consult the specialists for application advice. VCGT110302FS-1 WDN10 indexable turning insert — PKD grade, Rhombus 35° The VCGT110302FS-1 WDN10 is an indexable turning insert engineered for productive machining of abrasive, non‑ferrous materials, combining a polykristalliner Diamant (PKD) grade with a compact Rhombus 35° geometry for versatile turning use. PKD grade WDN10 for abrasive non‑ferrous materials Rhombus 35° geometry for versatile turning 7° clearance angle for controlled cutting action 0.2 mm corner radius for fine finishing High-performance cutting for abrasive non‑ferrous materials The PKD‑based WDN10 grade provides significantly higher wear resistance than conventional carbide in abrasive, non‑ferrous workpieces. This insert’s polykristalliner Diamant (PKD) layer is optimised for long tool life and steady cutting performance where standard grades wear quickly. Combined with the compact Rhombus 35° shape and a modest 7° clearance, the geometry promotes low cutting forces and predictable tool engagement, which helps maintain process stability and reduces rework in series production. Predictable surface quality and controlled chip formation The integrated chipbreaker (type 1) and the small 0.2 mm corner radius are tuned to generate consistent chips and a controlled cutting edge, supporting high‑quality surface finishes after each index. These design choices support efficient turning operations on abrasive aluminium alloys, copper alloys and similar non‑ferrous materials, where edge stability and minimal burr formation directly affect downstream assembly or coating processes. The overall setup aims to reduce downtime through fewer tool changes and repeatable results across similar batches. Practical explanation of technical details for decision making For buyers less familiar with PKD technology: PKD means a polycrystalline diamond layer bonded to a substrate, delivering exceptional hardness and abrasion resistance. The corner radius determines the achievable surface finish and edge strength; a 0.2 mm radius balances fine finishing with sufficient edge robustness. The 7° freedom (clearance) angle reduces rubbing behind the cutting edge and improves chip flow. It is recommended to verify the workpiece compatibility in the manufacturer’s product matrix before selection to ensure optimal results for specific alloys and process conditions. Application guidance and workshop integration This insert suits turning operations where abrasive non‑ferrous materials are processed at moderate feeds and speeds customary for PKD tooling. The insert’s compact VCGT geometry supports adaptable toolholder choices and easy indexability within typical turning tool clutches. For production planning, incorporate the WDN10 grade where extended tool life and consistent surface finish reduce downstream costs; consult the product matrix for exact material recommendations and cutting data to integrate the insert into standardised process sheets. For specific availability, cutting‑data recommendations or to request stock information on Walter Tools PKD inserts, contact Metav Werkzeuge’s technical team via info@metav-werkzeuge.com or by phone for tailored application support. Technical data SKU: VCGT110302FS-1-WDN10-WALTER Label: Drehwendeschneidplatte VCGT110302FS-1 WDN10 Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Numeric data Clearance angle: 7° Corner radius: 0.2 mm Plate size: 11 Plate thickness: 03 Tolerance class: G Materials / Special features Grade: WDN10 (PKD) Geometry: Rhombus 35° Chipbreaker: 1 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material designation: Katalogabhängig ISO designation: VCGT110302FS-1 WDN10 FAQ Which materials is this insert designed for? The insert is designed primarily for abrasive, non‑ferrous materials; the WDN10 PKD grade is optimised for such workpieces, with specific suitability to be checked in the product matrix. What does PKD mean for tool life and finish? PKD (polycrystalline diamond) in the WDN10 grade offers high abrasion resistance that extends tool life and stabilises surface finish on abrasive aluminium and copper alloys. How does the 0.2 mm corner radius affect results? A 0.2 mm radius provides a balance between edge strength and the ability to achieve fine surface finishes, reducing the tendency for micro‑chipping on non‑ferrous materials. Is this insert compatible with standard VCGT toolholders? The Rhombus 35° VCGT geometry is compatible with conventional VCGT‑style toolholders; verify holder clamping specifications for secure seating. Where to find recommended cutting data for WDN10? Cutting parameters and material compatibility for the VCGT110302FS-1 WDN10 are listed in the manufacturer’s product matrix and cutting‑data sheets; consult those documents for process setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new merchandise from the manufacturer.
VCGT110302M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of a Walter Cermet cutting grade, precise rhombic 35° geometry and the FP2 chipbreaker for consistent finishing and efficient chip control. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VCGT110302M-FP2 WEP10C — Turning indexable insert, rhombic 35°, 7° clearance (Walter Tools) The VCGT110302M-FP2 WEP10C is a rhombic 35° turning insert with a 0.2 mm nose radius and FP2 chipbreaker, intended for precision finishing operations and reproducible component surfaces. Walter Cermet grade WEP10C Rhombic 35° insert geometry 7° clearance angle 0.2 mm nose radius Consistent surface finish through Cermet precision The Walter Cermet grade WEP10C is engineered for fine finishing where repeatable surface quality and edge stability matter. Cermet cutting materials combine ceramic hardness with metallic toughness, producing reduced built-up edge and extended life in finishing cuts. The integrated FP2 chipbreaker supports controlled chip formation, lowering the risk of surface damage and enabling steady machining at finishing feeds. This combination makes the insert especially suitable where dimensional stability and surface integrity are priorities. Geometry tuned for predictable turning performance The rhombic 35° shape with a 7° clearance and a 0.2 mm nose radius provides a balance between accessibility and strength: the acute approach angle improves profile access while the clearance angle prevents rubbing on the flank. The small nose radius supports fine detail and tight tolerances without sacrificing edge life. Tolerance class G ensures consistent interchangeability across toolholders, and the plate size 11 with thickness 03 gives a compact, reliable seating in standard turning tool bodies. Application guidance and material considerations The insert is supplied in the Walter Cermet series and marked as WEP10C; material suitability should be verified against the specific product matrix before selection. Cermet grades typically excel in finishing operations and can deliver excellent surface results, but compatibility depends on the workpiece material and process parameters. For bespoke advice on feed, speed and workpiece compatibility, consult the product matrix or contact Metav Werkzeuge for machining recommendations tailored to the intended application. Operational advantages and handling recommendations Using this indexable insert supports predictable tool changes and economical reconditioning: the ISO designation VCGT110302M-FP2 WEP10C and the FP2 chipbreaker facilitate consistent chip control and straightforward parameter setup. For reliable performance, verify correct clamping and clean seating in the toolholder, inspect insert edges before use, and adhere to machine-specific recommendations for cutting data. These measures help to maximise productivity and achieve the intended surface quality with minimal process variation. For precise finishing with the Walter Cermet WEP10C grade and dependable chip control, contact Metav Werkzeuge for tailored advice and prompt supply coordination Technical data Article number: VCGT110302M-FP2-WEP10C-WALTER Product name: Drehwendeschneidplatte VCGT110302M-FP2 WEP10C Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Walter Cermet Core data Tolerance class: G Clearance angle: 7° Nose radius: 0.2 mm Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Features & versions Chipbreaker: FP2 Grade: WEP10C (Cermet) Designation without grade: VCGT110302M-FP2 ISO designation: VCGT110302M-FP2 WEP10C Execution: T Material: catalogue-dependent FAQ What is the primary benefit of the WEP10C grade? The WEP10C grade in this turning insert is a Walter Cermet formulation designed to enhance finishing performance and edge stability, giving improved surface finish and consistent component results. Which geometry features help with profile access? The rhombic 35° shape combined with the 7° clearance angle allows better approach to narrow profiles while maintaining sufficient edge strength for finishing cuts. How should the FP2 chipbreaker be used? The FP2 chipbreaker is optimised for controlled chip formation at finishing feeds; select cutting parameters that favour lower feed depths to exploit the chip control and surface-quality benefits. Is the insert suitable for all materials? Material suitability must be checked against the product matrix; the insert is part of the Walter Cermet series and requires verification for specific workpiece materials before selection. What should be checked before fitting the insert? Ensure clean seating and correct clamping in the toolholder, inspect insert edges for damage, and follow manufacturer guidance on cutting data to achieve repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT110302ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of robust chip control, precise geometry and the predictable wear behaviour of cermet to improve finishing operations and reduce rework. Order the insert or request application advice from Metav Werkzeuge for process integration and tool selection. VCGT110302ML-FX4 WEP01C – Turning insert, Rhombic 35° geometry, Walter Tools VCGT110302ML-FX4 WEP01C is a cermet turning insert intended for precision finishing and reliable chip formation in general turning applications Walter Cermet grade WEP01C for consistent edge life FX4 chipbreaker for reliable chip control Rhombic 35° insert with 0.2 mm corner radius 7° clearance angle, size 11 × thickness 03 Precision finishing with reduced rework The cermet composition of the WEP01C grade delivers a finely balanced cutting edge that is particularly advantageous for finishing passes. The combination of a Rhombic 35° geometry and a 0.2 mm corner radius supports tight dimensional control and repeatable surface quality, while the tolerance class G ensures consistent insert form across batches. These properties result in fewer scrap parts and less post-process correction, which supports higher first-pass yield in production environments. Predictable chip control and process stability The FX4 chipbreaker is engineered to produce compact, well-controlled chips during moderate to light cutting conditions, supporting safer machining and fewer interruptions. The 7° clearance angle reduces rubbing and heat build-up at the flank, improving edge retention during finishing cycles. Together, these features promote stable cutting forces and easier chip evacuation, which helps to maintain tool life and minimise unexpected downtime during serial production. Selection guidance and application fit Material suitability for this cermet grade is catalogue-dependent; customers are advised to consult the manufacturer's product matrix to verify compatibility with specific workpiece materials and operation modes. The insert is supplied in the VCGT110302ML-FX4 format and is designed for secure clamping in standard turning toolholders. For complex material combinations or mixed production runs, Metav Werkzeuge can provide application guidance and recommend alternative grades or geometries where necessary. For process recommendations or to secure the VCGT110302ML-FX4 WEP01C from Walter Tools, contact Metav Werkzeuge for tailored advice and ordering — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: VCGT110302ML-FX4-WEP01C-WALTER Designation: VCGT110302ML-FX4 WEP01C Series: Walter Cermet Manufacturer: Walter Tools Core specifications Insert form: Rhombic 35° Corner radius: 0.2 mm Clearance angle: 7° Size: 11 Thickness: 03 Tolerance class: G Design and features Chipbreaker: FX4 Grade: WEP01C (cermet) Execution: T Material designation: catalogue-dependent Application note: Check product matrix for material suitability FAQ What materials is this insert suitable for? The suitability depends on the product matrix; the VCGT110302ML-FX4 WEP01C cermet grade requires verification against the manufacturer's material recommendation before selection. What benefit does the FX4 chipbreaker provide? The FX4 chipbreaker supports compact, controlled chips and improved chip evacuation in finishing and light-turning operations, enhancing process stability for the Walter Tools insert. How does the 0.2 mm corner radius affect results? A 0.2 mm corner radius balances edge strength and surface finish: it helps maintain dimensional accuracy while delivering good topography during finishing passes. What does tolerance class G mean for production? Tolerance class G indicates consistent insert geometry within defined manufacturing limits, helping to reduce variation in serial production and aiding predictable assembly into toolholders. Is the WEP01C grade comparable to other cermets? WEP01C is a Walter Cermet grade optimised for reliable edge behaviour; compare the grade with alternative cermet options in the manufacturer's matrix for exact performance matches. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the listed manufacturers. The offered article is an original, factory-new product of the manufacturer.
VCGT110302MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
VCGT110302MR-FX4 WEP01C Drehwendeschneidplatte von Walter Tools Die VCGT110302MR-FX4 WEP01C Drehwendeschneidplatte ist eine Cermet-Sorte für präzise Drehbearbeitung und vielseitige Einsatzbereiche in der Werkstatt und Serienfertigung Walter Cermet Baureihe für präzise Oberflächen FX4 Spanbrecher für stabile Spanbildung Rhombus 35° Plattenform für vielseitige Anwendungen Freiwinkel 7° reduziert Schnittkräfte Eckenradius 0,2 für feine Detailbearbeitung Hohe Prozesssicherheit durch durchdachte Schneidstoffauswahl Die Sorte WEP01C gehört zur Schneidstoffklasse Cermet, was in der Produktmatrix als Schneidstoffspezifikation vermerkt ist. Diese Einordnung erleichtert die Auswahl für spezifische Zerspanungsaufgaben, weil die WEP01C in der Serienbeschreibung als Walter-Schneidstoffsorte geführt wird. Für den Anwender bedeutet das: gezielte Sortenauswahl nach Werkstoff und Bearbeitungsziel erhöht die Vorhersagbarkeit des Zerspanungsprozesses und reduziert Einstellaufwand. Geometrieorientierte Vorteile für stabile Bearbeitung Die Kombination aus Rhombus 35° Plattenform, FX4 Spanbrecher und einem Freiwinkel von 7° erlaubt eine vielseitige Einsetzbarkeit bei unterschiedlichen Drehoperationen. Der Spanbrecher FX4 begünstigt eine kontrollierte Spanbildung, was die Prozessstabilität unterstützt. Der kleine Eckenradius 0,2 ermöglicht feine Konturarbeit und Detailbearbeitung bei reproduzierbaren Ergebnissen. Produktintegration und Anwendungsempfehlung für Werkstatt und Produktion Die Wendeschneidplatte ist ausgelegt für modulare Werkzeughalter und typische Drehzentren; die Plattengröße 11 und die Plattendicke 03 passen zu gängigen Halterprogrammen. Anwender in Lohnfertigung und Serienproduktion profitieren von der Standardisierung der Iso-Bezeichnung und der einfachen Bestellbarkeit. Vor dem Einsatz empfiehlt sich der Abgleich mit der firmenspezifischen Werkstoffmatrix, damit Schnittwertempfehlungen optimal angepasst werden können. Empfehlung: Für zuverlässige Präzisionsbearbeitung die VCGT110302MR-FX4 WEP01C von Walter Tools einsetzen und bei technischen Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren. Produktmerkmale Artikelnummer: VCGT110302MR-FX4-WEP01C-WALTER Marke: Walter Tools Baureihe: Walter Cermet Produkttyp: Drehwendeschneidplatte Ausführung: T Fakten Plattengröße: 11 Plattendicke: 03 Eckenradius: 0,2 Freiwinkel: 7° Toleranzklasse: G Besonderheiten Sorte: WEP01C Spanbrecher: FX4 (spezifischer Spanbrecher) Plattenform: Rhombus 35° Wendeplatte ISO Bezeichnung: VCGT110302MR-FX4 WEP01C Bezeichnung ohne Sorte: VCGT110302MR-FX4 Schneidstoffklasse: Cermet-Schneidstoff Sorteneinsatz: Werkstoffeignung anhand der konkreten Produktmatrix prüfen FAQ Für welche Bearbeitungen eignet sich die VCGT110302MR-FX4 WEP01C am besten? Die VCGT110302MR-FX4 WEP01C von Walter Tools ist für universelle Drehoperationen konzipiert, bei denen kontrollierte Spanbildung und feine Konturarbeit gefragt sind. Die Kombination aus Rhombus 35° und FX4 Spanbrecher unterstützt vielseitige Anwendungen. Wie beeinflusst der Freiwinkel von 7° die Bearbeitung? Ein Freiwinkel von 7° reduziert den Kontaktwinkel zwischen Schneide und Werkstück, was die Schnittkräfte verringert und die Stabilität bei variierenden Schnittbedingungen erhöht. Welche Rolle spielt der Eckenradius 0,2 für die Oberfläche? Der Eckenradius 0,2 ermöglicht detailgenaue Konturen und feinere Übergänge an Werkstückkanten; bei Bedarf lässt sich die Oberflächenstruktur über passende Schnittparameter weiter optimieren. Wie finde ich die passende Sorte für meinen Werkstoff? Die Sorte WEP01C ist in der Walter Cermet Baureihe gelistet. Werkstoffeignung sollte anhand der konkreten Produktmatrix geprüft werden, um Schnittwerte und Standzeit realistisch abzuschätzen. Ist die Wendeplatte mit Standardhalter kompatibel? Die ISO-Bezeichnung VCGT110302MR-FX4 WEP01C entspricht gängigen Normen für Wendeplatten; die Plattengröße 11 und Dicke 03 sind kompatibel mit üblichen Haltersystemen. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT110304-FM2 WMP20G WMP20G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating and the robust WMP20G grade with the rhombic 35° geometry and 7° relief to secure consistent chip control and extended edge life when machining rostfreien Stahl; order directly via Metav Werkzeuge or consult our specialists for tailored application support. VCGT110304-FM2 WMP20G turning insert — Tiger·tec Gold, rhombic 35° for rostfreien Stahl | Walter Tools VCGT110304-FM2 WMP20G is a coated indexable insert engineered for turning operations on rostfreien Stahl in moderate to robust cutting conditions Tiger·tec Gold coated grade WMP20G Optimised for rostfreien Stahl (ISO group M) Rhombic 35° geometry, 0.4 mm corner radius 7° relief angle for enhanced edge security Reliable chip control and consistent productivity The coated Tiger·tec Gold grade WMP20G combines a wear-resistant coating with a substrate tuned for the demands of rostfreien Stahl. This composition improves chip formation and mitigates build-up on the cutting edge, resulting in steadier cutting forces and fewer unplanned interruptions. For workshops aiming to raise throughput, the insert’s stability reduces the frequency of edge changes and supports a predictable process window. Technical advantages translate directly into higher machine utilisation and lower unit-cost variability. Geometry designed for effective cutting and surface quality The rhombic 35° platform, paired with a 0.4 mm corner radius and a 7° relief angle, offers a balance between accessibility and edge strength. The 35° approach angle allows economical cutting forces and good surface finish in through-turning and profile passes, while the modest corner radius supports improved tool life without sacrificing accuracy. For operators less familiar with insert geometry, this configuration delivers reliable surface consistency and easier toolpath planning on common turning setups. Practical benefits in workshop applications Equipped with the FM2 chipbreaker, this indexable insert actively promotes predictable chip evacuation under varying feeds and speeds, simplifying coolant choices and reducing the risk of surface marking. The VCGT110304-FM2 WMP20G insert is particularly suited to applications where rostfreien Stahl tends to work-harden or produce long, stringy chips; its designed interaction between grade and chipbreaker supports safer, continuous cutting. When selecting cutting parameters, prioritise stable fixtures and moderate depths of cut to fully exploit the grade’s edge integrity for longer cycles. Contact Metav Werkzeuge for application-specific cutting data and availability of Walter Tools Tiger·tec Gold inserts; our team at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) will advise on optimal feeds, speeds and tooling setups Technical data SKU: VCGT110304-FM2-WMP20G-WALTER Designation: VCGT110304-FM2 WMP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Size designation: 11 Thickness designation: 03 Plate form: Rhombus 35° Tolerance class: G Special features Series: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM2 Material group: M (rostfreien Stahl) Application profile: moderate to robust cutting conditions FAQ What materials can this insert machine effectively? The insert is designed for rostfreien Stahl (ISO group M); the WMP20G grade and Tiger·tec Gold coating support secure chip formation in these alloys. What are the key geometric features of the insert? The unit has a rhombic 35° form, a 0.4 mm corner radius and a 7° relief angle, which together provide a compromise between cutting access and edge robustness for routine turning tasks. Which chipbreaker is fitted and what is its benefit? The FM2 chipbreaker is integrated to promote predictable chip control under a range of feeds, assisting continuous cutting and reducing the risk of entangling chips on rostfreien Stahl with the VCGT110304-FM2 WMP20G insert. Is the insert coated and what coating technology is used? Yes, the insert uses the Tiger·tec Gold coating technology; this enhances wear resistance and helps maintain cutting-edge integrity during extended production runs with rostfreien Stahl. For which applications is this insert recommended? Recommended for turning operations on rostfreiem Stahl under moderate to robust conditions where process reliability and consistent surface quality are required, the insert suits both batch production and longer single-part runs. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the stated manufacturer.
VCGT110304-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver series and the WSM01 grade delivers stable cutting edges and reliable chip control for demanding stainless and heat‑resistant superalloy turning; the optimized FM2 chipbreaker and the rhombic 35° geometry support consistent surface quality and extended tool life. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. VCGT110304-FM2 WSM01 — Indexable turning insert, Tiger‑tec Silver, FM2 chipbreaker (Walter Tools) VCGT110304-FM2 WSM01 is a rhombic 35° indexable turning insert designed for machining stainless steels and heat‑resistant superalloys with an emphasis on process security and tool life Tiger‑tec Silver coating for longer tool life Optimised FM2 chipbreaker for secure chip control Rhombic 35° geometry for versatile turning Suitable for stainless steel and superalloys Consistent performance for difficult‑to‑cut alloys The Walter Tools insert from the Tiger‑tec Silver series and grade WSM01 combines coating technology and a carbide substrate to address the typical challenges of stainless steel and superalloys: edge build‑up, heat concentration and poor chip evacuation. The FM2 chipbreaker stabilises chip formation and reduces the risk of built‑up edge, which in turn improves surface finish and reduces rework. For shop floors that demand repeatable results, this indexable insert supports a steady production flow and predictable tool change intervals, improving overall uptime and cost efficiency. Geometry and dimensions that support versatile turning The insert’s rhombic 35° form and 7° relief angle enable flexible tool positioning and good entry behaviour in a wide range of turning operations. A 0.4 mm corner radius balances edge strength and the ability to produce acceptable surface roughness in finishing to medium‑depth cuts. These dimensional choices make the insert suitable for facing, light turning and profile work in tougher materials, where consistent cutting conditions and reduced vibration are essential for machining quality components. Design features that simplify process implementation The FM2 chipbreaker is engineered to manage chips from ductile, heat‑sensitive materials, promoting short, controllable chips instead of long, tangled swarf. Combined with the WSM01 coated carbide grade, this reduces edge wear and thermal loading at the cutting zone. For production planners, the result is improved tool life and fewer interruptions for tool inspection or premature regrinding. The insert’s standard indexable format also permits quick replacement and consistent orientation, which eases set‑up and reduces operator variability. Application guidance and material compatibility This insert is intended for machining stainless steel (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). Selection of cutting data should reflect the material’s heat conductivity and strength at temperature: lower cutting speeds and higher feed rates are often recommended for nickel‑based superalloys, while optimised coolant strategy and stable clamping are critical for achieving the best life from the WSM01 grade. When paired with appropriate toolholders and cutting parameters, the insert supports a productive balance between material removal rate and surface integrity. For tailored recommendations and stock availability of the Walter Tools VCGT110304-FM2 WSM01 insert, please contact Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and application support Technical data Article number: VCGT110304-FM2-WSM01-WALTER Designation: VCGT110304-FM2 ISO designation: VCGT110304-FM2 WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 11 Thickness code: 03 Tolerance class: G Features Chipbreaker: FM2 Grade: WSM01 Plate form: Rhombus 35° Suitable materials: stainless steel (M), heat‑resistant superalloys / titanium (S) Execution: T FAQ What materials is this insert suited for? The VCGT110304‑FM2 WSM01 insert is suitable for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where the WSM01 grade and FM2 chipbreaker provide stable cutting behaviour. How does the FM2 chipbreaker improve machining? The FM2 chipbreaker promotes secure chip control and short chip forms when machining ductile or heat‑sensitive alloys, helping to reduce built‑up edge and improving surface finish with this Walter Tools insert. Which geometric features support versatile use? The rhombic 35° geometry together with a 7° relief angle and 0.4 mm corner radius offer a compromise between edge strength and finishing capability, making the insert adaptable to facing and light to medium turning tasks. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Mention of brand names such as Walter Tools is for explanation only and does not imply any affiliation. The offered article is an original, factory‑new product of the manufacturer.
VCGT110304-FM2 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the WSM10S grade for extended tool life and secure chip control; the combination of a Rhombic 35° form and the FM2 chipbreaker supports consistent surface quality in stainless steels and superalloys. Order or request advice via Metav Werkzeuge for immediate application support. VCGT110304-FM2 WSM10S indexable turning insert for stainless steel and superalloys — Walter Tools The VCGT110304-FM2 WSM10S is an indexable turning insert engineered to provide stable cutting-edge performance when machining stainless steels and heat‑resistant superalloys, utilising the Tiger·tec Silver coated carbide grade. Tiger·tec Silver coating for stable cutting edge FM2 chipbreaker for secure chip control Rhombic 35° form for versatile turning 7° clearance and 0.4 mm corner radius for finish Durable edge technology for demanding materials The WSM10S grade, part of the Tiger·tec Silver family, is formulated for heavy machining of tough alloys and for applications involving stainless steels (ISO group M) and superalloys/titanium (ISO group S). The coating and substrate combination enhances heat resistance and abrasion protection, which translates into a longer tool life and fewer insert changes. For process planners, this means improved machine uptime and a predictable production flow when working with materials that typically cause rapid wear or edge build-up. Predictable chip flow increases productivity The integrated FM2 chipbreaker is designed for reliable chip formation across a range of interrupted and continuous cuts. Consistent chip control reduces the risk of entanglement and tool damage, supports safe automatic machining cycles and simplifies chip management at the extraction stage. As a result, cycle times remain stable and downstream operations benefit from fewer surface defects, delivering an efficient and economical machining process. Geometry that balances cutting access and surface finish The Rhombic 35° shape provides a favourable entry angle for a variety of turning operations, combining reach with rigidity. The 0.4 mm corner radius and 7° clearance angle contribute to good surface quality while maintaining edge strength for light roughing and finishing passes. The insert dimensions (size 11, thickness 03) suit common toolholder families, enabling flexible toolset design without sacrificing accuracy. These geometric choices help to achieve consistent part tolerances and reduced rework. Seamless workshop integration and application support Compatibility with standard indexable‑insert toolholders and a focus on stable cutting behaviour make integration into existing workflows straightforward. The insert’s combination of grade and chip control helps to reduce tool consumption and unplanned downtime, supporting cost‑efficient serial production. For further machining parameter recommendations or material‑specific strategies, Metav Werkzeuge provides application consultancy and technical data to help select optimal cutting speeds and feeds. For tailored cutting data or to secure Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert assistance and rapid dispatch. Technical data SKU: VCGT110304-FM2-WSM10S-WALTER Name: VCGT110304-FM2 WSM10S indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Chipbreaker: FM2 Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombic 35° Plate size: 11 Thickness: 03 Tolerance class: G Execution: T Special features Coated cemented carbide grade WSM10S Optimised FM2 chipbreaker for safe chip control Suited to stainless steels (M) and superalloys/titanium (S) Designed for productive machining and improved edge stability Compatible with standard indexable insert toolholders FAQ Which materials are suitable for this insert? The VCGT110304-FM2 WSM10S insert from Walter Tools is suitable for machining stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering stable cutting behaviour in these demanding materials. What is the benefit of the FM2 chipbreaker? The FM2 chipbreaker on this insert promotes controlled chip formation, improving chip evacuation and reducing the risk of chip-related incidents during automatic turning cycles with the VCGT110304-FM2 WSM10S. How does the Rhombic 35° form affect cutting performance? The Rhombic 35° geometry provides a favourable entry angle that balances accessibility and rigidity, enabling versatile turning operations while supporting consistent surface finish with the specified corner radius. What corner radius is specified and when should it be used? The insert features a 0.4 mm corner radius, suitable for finishing and light roughing applications where a compromise between edge strength and surface quality is required. Is the grade coated and what advantages does that bring? Yes; the WSM10S grade is part of the Tiger·tec Silver coating technology, which increases thermal resistance and wear protection, resulting in longer insert life and higher process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for clarification. There is no affiliation between our company and the mentioned brands. The offered item is original and factory‑new from the manufacturer.
VCGT110304-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM20S grade for stable edge life and controlled chip formation; the combination of a Rhombic 35° geometry with a 0.4 mm nose radius ensures predictable cutting forces and consistent surface finish. Order the VCGT110304-FM2 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. VCGT110304-FM2 WSM20S — indexable turning insert, Rhombic 35°, Tiger·tec Silver (Walter Tools) The VCGT110304-FM20S is an indexable turning insert engineered for high process reliability when machining stainless steels and heat‑resistant superalloys, offering secure chip control and long tool life. Tiger·tec Silver coating for heat resistance Suitable for stainless steels and superalloys Rhombic 35° insert with 0.4 mm nose radius FM2 chipbreaker for controlled chips Reliable performance on stainless steels and superalloys The WSM20S grade, part of the Tiger·tec Silver family, is formulated to cope with the thermal and mechanical stresses of machining stainless steels and superalloys. Its coated cemented carbide composition improves heat resistance and reduces flank and crater wear, resulting in longer tool life and fewer interruptions in production. For applications where material adhesion and built‑up edge are common, this grade supports stable cutting edge behaviour and consistent component quality. Geometry that stabilises cutting and surface finish A Rhombic 35° lead angle paired with a 0.4 mm nose radius and 7° relief produces a favourable balance between cutting force direction and tool strength. The geometry moderates cutting loads for finishing passes while still offering sufficient edge support for semi‑finishing operations. The result is improved dimensional control and a predictable surface condition, which reduces the need for subsequent finishing and shortens overall cycle time. Controlled chips and process efficiency The FM2 chipbreaker is designed to generate short, manageable chips across a range of depths of cut, improving swarf evacuation and machine safety. With secure chip control and the thermal resilience of the coating, operators can run more stable cutting parameters and achieve higher material removal rates without sacrificing tool life. This contributes directly to increased throughput and a lower cost per part in series production. Practical compatibility and straightforward identification The insert follows the common ISO designation VCGT110304‑FM2, making it compatible with standard toolholders for turning operations. Its size and thickness are industry‑standard, which simplifies inventory management and tool change procedures. For shops machining mixed batches of stainless steels and heat‑resistant alloys, this insert provides a versatile solution that reduces tooling complexity while maintaining consistent results. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and secure the optimal selection for specific stainless or superalloy applications; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VCGT110304-FM2-WSM20S-WALTER Label: Drehwendeschneidplatte VCGT110304-FM2 WSM20S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert ISO designation: VCGT110304-FM2 WSM20S Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 35° Insert size: 11 Thickness: 03 Grade: WSM20S Series: Tiger·tec Silver Tolerance class: G Special features Chipbreaker: FM2 Coating technology: Tiger·tec Silver Workpiece groups: S (superalloys, titanium), M (stainless steels) Execution: T Suitable for rostfreier Stahl machining: yes FAQ What materials is this insert suitable for? The VCGT110304-FM2 WSM20S insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), benefitting from the Tiger·tec Silver coating in demanding thermal conditions. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker shapes short, controllable chips that enhance swarf evacuation and safety, which helps maintain stable machining and reduces interruptions for chip clearance. Which toolholders fit this ISO designation? Standard toolholders designed for VCGT ISO inserts accept this geometry; the ISO designation VCGT110304‑FM2 identifies the insert form and relief for correct mounting. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and wear protection, supporting longer tool life and steady cutting performance when machining adhesive or heat‑generating materials. Is the nose radius suitable for finishing work? With a 0.4 mm nose radius, the insert offers a good compromise between edge strength and surface finish, making it suitable for semi‑finish and finish operations depending on cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanation purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
VCGT110304-FN2 WN10 Wendeplatten - Walter Tools
Take advantage of the insert’s combination of precise geometry, reliable edge performance and easy interchangeability for consistent turning results; order directly via Metav Werkzeuge or consult our technical team for detailed material suitability. VCGT110304-FN2 WN10 turning insert, Rhombus 35° geometry, 7° relief — Walter Tools The VCGT110304-FN2 WN10 is a single-sided indexable turning insert designed for general turning and fine finishing, offering a 0.4 mm corner radius and a 7° relief for controlled cutting and improved surface quality Rhombus 35° geometry for versatile turning 7° relief angle for precise chip control 0.4 mm corner radius for fine finishing Uncoated carbide WN10 for stable edge life Reliable geometry for predictable process performance The rhombic 35° shape and the measured 7° relief deliver a balance between strength and accessibility when machining profiles and shoulders. As an indexable insert, the component allows rapid seat changes which reduces machine downtime and supports stable toolpath strategies. The small 0.4 mm corner radius contributes to a fine surface finish and helps to limit cutting forces during light finishing passes. For production environments where repeatability and cycle time matter, these geometric parameters translate directly into consistent part quality and fewer in‑process adjustments. Material and edge behaviour explained for straightforward selection This insert is supplied in the WN10 grade, an uncoated carbide composition intended for general-purpose turning where a robust cutting edge and stable chip formation are required. “Uncoated” indicates the absence of an additional surface layer; for many applications this can improve edge toughness and resist chipping when interrupted cuts occur. End users should consult the manufacturer’s product matrix to confirm suitability for specific materials and hardness levels, since the grade is optimised for a broad range rather than a single niche. The practical result is a tool that combines good wear resistance with forgiving performance under variable cutting conditions. Practical advantages for workshop efficiency and tool management The insert’s standardised format and indexable design support rapid replacement and straightforward inventory handling, improving workshop throughput. The FN2 chipbreaker helps to direct chips reliably during typical turning operations, reducing rework and the risk of tool‑related defects. Where process stability and predictable tool life increase overall productivity, the combination of geometry, chip control and the WN10 carbide grade provides a pragmatic, cost‑effective solution. For bespoke machining strategies or high‑volume production, pairing these inserts with appropriate toolholders ensures optimal heat dissipation and repeatable clamping for continual operation. For application-specific advice on Walter Tools inserts such as the VCGT110304-FN2 WN10, contact Metav Werkzeuge for specification guidance and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCGT110304-FN2-WN10-WALTER Designation: VCGT110304-FN2 WN10 Manufacturer: Walter Tools Facts Plate size: 11 Plate thickness code: 03 Relief angle: 7° Corner radius: 0.4 mm Tolerance class: G Special features Shape: Rhombus 35° Chipbreaker: FN2 Grade: WN10 Coating / surface: uncoated carbide Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: catalogue-dependent FAQ What applications suit this insert best? The VCGT110304-FN2 WN10 insert is intended for general turning and finishing tasks where a small corner radius and predictable chip control are required; check the Walter Tools product matrix for exact material matches. Is the WN10 grade coated or uncoated? The WN10 designation denotes an uncoated carbide grade for the VCGT110304-FN2 insert, prioritising edge toughness and stable chip formation. How does the 7° relief affect machining? A 7° relief reduces rubbing behind the cutting edge and improves chip flow, helping the insert maintain surface quality during light to medium finishing cuts. Which chipbreaker is fitted and what is its benefit? The insert uses an FN2 chipbreaker, designed to encourage controlled chip formation and evacuation in typical turning operations, lowering the risk of entanglement and surface damage. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer (Walter Tools).
VCGT110304-FN2 WNN10 Wendeplatten - Walter Tools
Benefit from consistent chip control and high process stability brought by the WNN10 coated carbide together with the FN2 chipbreaker and Rhombus 35° geometry; ideal for productive turning operations. Order the VCGT110304-FN2 WNN10 directly via Metav Werkzeuge or contact our consultants for tailored advice. VCGT110304-FN2 / VCGT110304-FN2 WNN10 / WNN10 — Turning insert (Rhombus 35°) by Walter Tools A VCGT110304-FN2 WNN10 turning insert designed for stable chip formation and reliable performance in general turning applications with FN2 chip control FN2 chipbreaker for stable chip formation Rhombus 35° form for versatile turning 7° clearance angle for secure cutting WNN10 coated carbide grade Consistent chip control that keeps production moving The insert’s FN2 chipbreaker is engineered to produce short, controllable chips under a wide range of cutting conditions. This results in fewer interruptions at the machine and more predictable machining cycles, translating into higher productivity and reduced manual intervention. The combination of chip geometry and the WNN10 coated carbide grade supports continuous cutting even during demanding operations, so the process remains both efficient and repeatable. Geometry and edge design for dependable cutting With a Rhombus 35° form and a 0.4 mm corner radius, the insert balances strength and accessibility: the geometry enables secure tool engagement while the corner radius contributes to stable cutting forces and improved surface finish. The 7° clearance prevents undue rubbing, reducing heat generation and promoting longer edge life. These design choices make the component suitable where consistent dimensional results and surface quality are required. Material class and coating that support broad applicability The grade is specified as a coated carbide in the Walter series, offering a compromise between wear resistance and toughness. This composition is intended to handle a variety of commonly machined materials when selected in accordance with the product matrix. The open-series designation indicates practical flexibility; process planners should verify the exact material match for optimal performance, but the insert is positioned to deliver reliable performance across many turning tasks. Practical handling and integration into production The insert’s standard designation and form facilitate straightforward toolholder selection and replacement, helping to reduce setup time. The tolerance class G ensures consistent fit and repeatable seating in the toolholder, which supports dimensional stability across index changes. Where process reliability and quick indexability are priorities, this solution integrates easily into automated or manual turning workflows. For precise application advice or a customised recommendation based on machining conditions, contact Metav Werkzeuge — our specialists will discuss the best use of the Walter Tools WNN10 grade and FN2 chipbreaker for the intended turning tasks; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data Article number: VCGT110304-FN2-WNN10-WALTER Name: Drehwendeschneidplatte VCGT110304-FN2 WNN10 Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Chipbreaker: FN2 Facts Corner radius: 0.4 mm Clearance angle: 7° Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Tolerance class: G Special features Coated carbide (beschichtetes Hartmetall) Stable chip formation Designed for productive turning Series and grade details catalogue-dependent Application suitability to be checked against product matrix FAQ What is the primary benefit of the FN2 chipbreaker? The FN2 chipbreaker on the VCGT110304-FN2 WNN10 insert improves chip control, producing short, uniform chips that support uninterrupted turning cycles. Which geometry does the insert use and why does it matter? The Rhombus 35° geometry gives the insert good access for versatile turning operations while maintaining cutting stability and edge strength. Is the WNN10 grade suitable for stainless or hardened steels? The WNN10 is a coated carbide grade; suitability for specific materials should be verified against the product matrix and machining parameters for best results. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius provides a balance between robustness and surface integrity, helping to produce consistent surface quality with moderate cutting conditions. Who supplies technical advice for integrating this insert into production? Metav Werkzeuge can provide tailored recommendations for using the Walter Tools insert in your machining processes, including selection of toolholders and cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
VCGT110304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, the stable MM4 chipbreaker and a robust 0.4 mm cutting edge for reliable turning of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. VCGT110304-MM4 WSM01 — Indexable turning insert (Rhombic 35°, 7°) by Walter Tools The VCGT110304-MM4 WSM01 is a rhombic turning insert engineered for high‑duty machining of stainless steels and heat‑resistant superalloys in industrial turning operations. Tiger‑tec Silver grade for long tool life Suitable for stainless steel and superalloys Rhombic 35° form with 0.4 mm corner radius 7° relief angle for stable cutting performance Predictable chip control for difficult materials The combination of the MM4 chipbreaker and the insert geometry produces consistent chip control, which is crucial when machining tough materials that tend to form stringy or serrated chips. The dedicated chipbreaker reduces the risk of chip entanglement and helps to maintain a steady metal removal rate, leading to fewer process interruptions and more stable cycle times. For production environments, this translates into higher throughput and reduced secondary handling. Durable edge and heat resistance for longer tool life The insert is part of the Tiger‑tec Silver series and uses a coated carbide grade optimised as WSM01 for challenging applications. That coating strategy increases resistance to abrasive wear and helps prevent rapid edge breakdown under elevated temperatures. The result is a more consistent surface finish over time and fewer index changes, which benefits both batch production and one‑off machining of demanding alloys. Geometry that balances accessibility and strength The Rhombic 35° shape with a 0.4 mm corner radius and a 7° relief angle provides a compromise between cutting strength and access to profiles. The modest corner radius supports a robust cutting edge for interrupted cuts and light roughing, while the rhombic form allows effective approach angles in turning applications. This geometry is particularly useful where both stability and the ability to reach narrow features are required. Application guidance and process reliability Designed for machining according to ISO groups M and S, the insert performs well on stainless steel and heat‑resistant superalloys where thermal load and toughness are high. The stable cutting edge and optimised chip formation contribute directly to process reliability and repeatable part quality. For workshops and subcontractors aiming to reduce rework and achieve consistent tolerances, the insert offers a pragmatic balance of performance and robustness. Contact Metav Werkzeuge today for application advice and rapid supply of Walter Tools Tiger‑tec Silver inserts; consultants are available to recommend the best geometry and cutting data for specific materials. Technical data SKU: VCGT110304-MM4-WSM01-WALTER Designation: VCGT110304-MM4 WSM01 Product type: Indexable turning insert Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 35° Insert size: 11 Plate thickness: 03 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Execution: T Material suitability: S / M (heat‑resistant superalloys, stainless steel) Label: VCGT110304-MM4 WSM01 WALTER FAQ What materials is this insert suited for? The VCGT110304-MM4 WSM01 insert from Walter Tools is designed for stainless steels and heat‑resistant superalloys (ISO groups M and S). What advantage does the MM4 chipbreaker provide? The MM4 chipbreaker on the Walter Tools turning insert improves chip control and reduces the risk of chip jamming, increasing process stability during continuous turning. How does the Rhombic 35° shape affect cutting performance? The Rhombic 35° form gives a favourable approach angle for many turning tasks, combining access to profiles with a robust edge supported by the 0.4 mm corner radius. Is the WSM01 grade suitable for high‑temperature cutting? The WSM01 grade within the Tiger‑tec Silver series is a coated carbide formulation intended to resist abrasive wear and thermal stresses common when machining superalloys and stainless steels. Which part identification should be used when ordering? Order using SKU VCGT110304-MM4-WSM01-WALTER to ensure the correct Walter Tools indexable turning insert is supplied. Walter Tools: Walter AG, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Walter Tools and other brand names are mentioned for explanation and accurate identification of the offered product. There is no affiliation or partnership between Metav Werkzeuge and the named brands. The article offered is an original, factory‑new product from the manufacturer.
VCGT110304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Combine reliable edge life with broad material coverage and a geometry engineered for consistent chip control to keep production running smoothly; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. VCGT110304-MM4 WSM20S — Turning indexable insert, Tiger·tec Silver, Rhombus 35° (Walter Tools) The VCGT110304-MM4 WSM20S is a rhombic 35° turning insert designed for productive machining of stainless steel and heat‑resistant superalloys in demanding turning operations. Tiger·tec Silver coated grade WSM20S Optimised MM4 chipbreaker for stable chips Rhombus 35° with 0.4 mm corner radius Suitable for stainless steel and high‑temp alloys Increase uptime through a wear‑resistant grade The Tiger·tec Silver WSM20S grade provides a balanced combination of wear resistance and thermal stability, which is particularly valuable when machining tough materials such as stainless steel and heat‑resistant superalloys. The coated carbide construction supports a stable cutting edge under elevated temperatures, reducing flank wear and the frequency of insert changes. The result is more predictable tool life and fewer unscheduled stops, delivering measurable gains in process efficiency and reduction in rework. Consistent surface quality thanks to optimised chip control The MM4 chipbreaker together with the Rhombus 35° geometry ensures controlled chip formation and secure evacuation even in challenging materials. A 0.4 mm corner radius and 7° clearance angle combine to lower cutting forces and support a consistent surface finish, which translates into fewer downstream finishing operations. For shop floors aiming to tighten tolerances and reduce secondary machining, the geometry helps to produce repeatable, high‑quality parts cycle after cycle. Designed for integration into industrial turning systems Marked as S / M for its material scope, the insert is suited to both superalloys/titanium (S) and stainless steels (M), enabling a single grade to cover several hard‑to‑cut material families. The standard VCGT form and the VCGT110304‑MM4 designation permit straightforward mounting in common toolholders, easing inventory management and minimising tool change complexity. The stable edge behaviour under cutting and the coating’s heat management capability support higher productivity and consistent component quality within established machining strategies. Practical support and process advice for secure implementation For shops assessing the grade for specific process windows, technical advice is available to match cutting data and coolant strategy to the workpiece material and machine capability. Metav Werkzeuge and the manufacturer’s application literature provide guidance on selecting feeds, speeds and insert orientation to make the most of the Tiger·tec Silver technology while safeguarding tool life. For complex components or mixed‑material batches, coordinated process support helps to avoid trial‑and‑error and to accelerate reliable production ramp‑up. Contact Metav Werkzeuge for tailored application advice and availability — Metav Werkzeuge GmbH: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: VCGT110304-MM4-WSM20S-WALTER Name: VCGT110304-MM4 WSM20S Manufacturer: Walter Tools Type: Turning indexable insert Facts Clearance angle: 7° Nose/corner radius: 0.4 mm Insert size: 11 Thickness designation: 03 Geometry: Rhombus 35° Tolerance class: G Special features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Material scope: S / M (superalloys/titanium and stainless steels) Base material: coated carbide Designation: VCGT110304-MM4 FAQ What materials is this insert intended for? The VCGT110304‑MM4 WSM20S insert from Walter Tools is formulated for stainless steels and heat‑resistant superalloys (S / M designation), offering secure chip formation and edge stability in these groups. Which insert geometry yields the best surface finish? The Rhombus 35° form with a 0.4 mm nose radius on the WSM20S grade supports lower cutting forces and consistent surface quality, making it a reliable choice for finishing and semi‑finishing passes. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker is optimised for controlled chip segmentation and evacuation; when combined with the Tiger·tec Silver coating it helps to reduce built‑up edge and maintain a stable cutting edge under thermal load. Can the insert be used in standard toolholders? Yes; the VCGT form is a common indexable insert style and the VCGT110304‑MM4 designation allows simple integration into matching holders, easing tool changeover and stock management. Is this a coated or uncoated grade? The WSM20S is a coated carbide grade from the Tiger·tec Silver series, designed to improve wear resistance and thermal performance in demanding turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and protected product names are used for explanation only. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer.
VCGT110304-MN2 WN10 Wendeplatten - Walter Tools
Benefit from a robust combination of reliable edge life and predictable chip control thanks to the WN10 uncoated carbide grade and the MN2 chipbreaker; these features support productive turning and consistent results in series production. Order directly via Metav Werkzeuge or consult our specialists for application-specific selection. VCGT110304-MN2 WN10 indexable turning insert — Walter Tools, rhombic 35° geometry, 7° relief VCGT110304-MN2 WN10 is an indexable turning insert designed for general turning applications where stable cutting behaviour and repeatable performance are required Rhombic 35° geometry for versatile turning 7° relief angle for secure chip flow 0.4 mm corner radius for durable edge strength MN2 chipbreaker for controlled chip formation Efficient machining through proven chip control The rhombic 35° geometry combined with the MN2 chipbreaker delivers predictable chip formation and easy evacuation, reducing interruptions in the cutting process. For workshops and production lines this means fewer machine stops for chip clearing and more continuous cutting time. The insert’s geometry supports a range of turning strategies, making it suitable for both roughing and semi-finishing operations while maintaining dimensional stability. Material and grade information that eases tool choice The insert is supplied in the WN10 uncoated carbide grade, a reliable choice where a simple carbide edge is preferred. The uncoated composition offers consistent behaviour at standard cutting speeds and can be easier to sharpen or recondition where needed. For users evaluating tooling options, this results in straightforward process setup and predictable wear characteristics compared with more complex coated grades. Geometry designed for edge durability and surface integrity With a 0.4 mm corner radius and a 7° relief angle, the insert balances cutting edge robustness and surface finish. The moderate corner radius increases edge strength, which helps to avoid premature chipping in interrupted cuts, while the relief angle reduces rubbing and heat generation at the flank. Together these attributes contribute to longer edge life and more consistent surface quality on turned components. Practical compatibility and workshop benefits The insert designation aligns with common ISO-style nomenclature and fits holders designed for VCGT-style inserts, simplifying procurement and toolholder selection. The VCGT110304-MN2 profile supports efficient inventory management and predictable tool change planning. Where process reliability is the priority, the combination of geometry and chip control supports stable cycle times and repeatable part quality. For application advice or to confirm suitability for a specific material, contact Metav Werkzeuge GmbH — the Walter Tools specialists are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 to recommend the optimal insert for the job. Technical Data Article number: VCGT110304-MN2-WN10-WALTER Designation: VCGT110304-MN2 ISO designation: VCGT110304-MN2 WN10 Manufacturer: Walter Tools Core data Size: 11 Thickness: 03 Corner radius: 0.4 Relief angle: 7° Plate form: Rhombus 35° Chipbreaker: MN2 Special features Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Tolerance class: G Material supply: Katalogabhängig FAQ What materials suit this insert best? The insert in the WN10 uncoated carbide grade is intended for general turning tasks; material suitability should be checked against the product matrix and the intended workpiece material. Which toolholder fits the VCGT110304-MN2 geometry? Holders designed for VCGT-style indexable turning inserts accommodate this geometry; select a holder matching the 35° rhombic profile for correct clamping and orientation. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip formation and reliable evacuation, which reduces interruptions and supports a stable machining process. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and brand names mentioned are the property of their respective owners. The referenced brand in this listing is an original, factory-new product of the manufacturer. There is no affiliation between Metav Werkzeuge and the trademark owners beyond reseller status.
VCGT110304-MN2 WNN10 MN2 Wendeplatten - Walter Tools
Taking advantage of the WNN10 coated carbide grade and the MN2 chipbreaker, this insert delivers consistent chip control and reliable edge life for medium to fine turning operations; order the VCGT110304-MN2 WNN10 insert directly via Metav Werkzeuge or consult their advisors for application-specific guidance. VCGT110304-MN2 WNN10 indexable turning insert, rhombic 35° form, Walter Tools VCGT110304-MN2 WNN10 is a coated carbide indexable turning insert designed for general turning tasks where controlled chip formation and repeatable edge performance are required Rhombic 35° geometry for versatile turning 0.4 mm corner radius for fine profiles MN2 chipbreaker for reliable chip control Coated carbide grade WNN10 by Walter Tools Stable chip control for uninterrupted production The MN2 chipbreaker is engineered to promote predictable chip flow and reduce the risk of built-up edge in medium cutting conditions. Combined with the WNN10 coated carbide, the geometry supports steady material removal rates and less operator intervention, which translates to fewer interruptions on the shop floor. This results in improved cycle-time reliability and helps maintain surface quality across batches. The insert’s design reduces the occurrence of long, stringy chips that can foul tooling and machine components, supporting a cleaner process and safer handling. Precise geometry for fine profiles and repeatable finishes The rhombic 35° form and 0.4 mm corner radius enable accurate profiling and turning close to shoulders or grooves. The small nose radius favours finer surface finishes and dimensional control on small-diameter workpieces or finishing passes. With a 7° clearance angle, the insert balances cutting edge strength and low rubbing, ensuring a consistent tool/workpiece interface during finishing. These geometric choices mean fewer downstream corrections and a higher first-pass acceptance rate for turned parts. Practical compatibility and process security in mixed production With an 11 mm inscribed circle and a compact thickness indication of 03, this insert fits common toolholders for a broad range of turning setups and is suited to flexible production environments. The composition and the manufacturing tolerance (tolerance class G) support repeatable seat and clamping behaviour, which is essential for multi-shift operations or automated tool changes. Where material and cutting parameters vary, the insert’s balanced feature set provides a dependable baseline for tool parameter tuning and efficient process development. Contact Metav Werkzeuge for tailored recommendations on Walter Tools turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to request the detailed WNN10 datasheet and application advice Technical Data SKU: VCGT110304-MN2-WNN10-WALTER Product: Drehwendeschneidplatte VCGT110304-MN2 WNN10 Walter Tools Manufacturer: Walter Tools Facts Plate size: 11 Thickness: 03 Corner radius: 0.4 Free cutting angle: 7° Plate form: Rhombus 35° Tolerance class: G Special features Coated carbide grade WNN10 Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T ISO designation: VCGT110304-MN2 WNN10 Designation without grade: VCGT110304-MN2 Material: Catalogue-dependent FAQ What materials is this insert suitable for? The VCGT110304-MN2 WNN10 insert, produced by Walter Tools, is a versatile coated carbide grade intended for a range of turning tasks; specific material suitability should be checked against the WNN10 product matrix for best results. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip segmentation and smoother evacuation, improving process reliability and reducing the likelihood of chip-related interruptions during turning. Can the insert be used for finishing passes? Yes, the combination of 0.4 mm corner radius and rhombic 35° geometry makes the insert appropriate for fine finishing operations where dimensional accuracy and surface quality are priorities. Is the geometry compatible with standard toolholders? The insert’s 11 mm inscribed circle and ISO designation make it compatible with common indexable turning toolholders that accept this insert format. What does tolerance class G mean for production? Tolerance class G indicates consistent manufacturing tolerances that support repeatable seating and clamping, which is beneficial for automated tool changes and multi-shift production environments. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
VCGT110304FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 PKD grade and the Rhombic 35° form for consistent, high‑wear performance in non‑ferrous and abrasive materials; the 0.4 mm corner radius and 7° clearance deliver controlled edge strength and reliable surface finish. Order directly via Metav Werkzeuge or contact our consultants for application advice and cutting data. VCGT110304FS-1 WDN10 — Indexable turning insert, PKD for non‑ferrous & abrasive materials (Walter Tools) The VCGT110304FS-1 WDN10 is an indexable turning insert in a rhombic 35° form, engineered as a PKD grade for high‑wear machining of non‑ferrous and other abrasive, non‑ferrous workpieces. PKD grade WDN10 for high wear resistance Rhombic 35° form for versatile turning 0.4 mm corner radius for precise edge control Extended life in abrasive turning operations The primary benefit of the WDN10 polykristalliner Diamant (PKD) grade is wear resistance, especially when finishing abrasive non‑ferrous materials. The use of a diamond‑based cutting edge significantly reduces flank wear and preserves edge geometry over extended cycles, which translates into fewer indexings and longer tool life. This durability supports higher cumulative part counts and steadier process windows, improving overall machining economy. Consistent surface quality and chip management A rhombic 35° shape combined with a 0.4 mm corner radius and a 7° clearance angle provides stable cutting engagement and a reliable surface finish on turned components. The small corner radius supports fine finishing while maintaining sufficient edge strength to resist chipping. The integrated chipbreaker 1 promotes predictable chip formation for brittle or abrasive materials, reducing the risk of surface defects and protecting the toolholder and workpiece from adverse chip behaviour. Adaptable geometry for different turning tasks The insert’s dimensions — designated size 11 with thickness code 03 and the VCGT‑style geometry — make it suitable for a wide range of external turning applications in standard VCGT toolholders. The geometry allows for controlled radial engagement and comfortable access in restricted areas, enabling both profiling and light roughing operations with limited setup changes. For machine shops seeking flexibility, the insert’s form factor supports a pragmatic tool inventory strategy. Selection guidance and application notes PKD inserts such as this are optimised for aluminium, copper alloys, composite materials and other abrasive, non‑ferrous workpieces; verify the specific workpiece suitability against the manufacturer’s product matrix before series production. Cutting speeds and feeds must be adapted to material thermal properties and toolholder rigidity to exploit the WDN10 grade’s advantages fully. If further clarification or tailored cutting data is required, Metav Werkzeuge’s technical team can provide guidance and recommend compatible toolholders and parameter sets. Contact Metav Werkzeuge for tailored application support on Walter Tools PKD inserts and to discuss optimal cutting data and toolholder selection via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VCGT110304FS-1-WDN10-WALTER Label: Drehwendeschneidplatte VCGT110304FS-1 WDN10 Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Grade: WDN10 Shape: Rhombus 35° Clearance angle: 7° Corner radius: 0.4 mm Size: 11 Thickness code: 03 Chipbreaker: 1 Special features Polykristalliner Diamant (PKD) cutting material Material suitability: non‑ferrous and abrasive non‑ferrous materials (verify product matrix) Execution: T Material specification: Katalogabhängig FAQ What materials is the VCGT110304FS-1 WDN10 best suited for? The VCGT110304FS‑1 WDN10 by Walter Tools is a PKD indexable turning insert optimised for aluminium, copper alloys and other abrasive, non‑ferrous materials; verify the precise workpiece suitability in the product matrix. Can this insert achieve a fine surface finish? Yes, the 0.4 mm corner radius and Rhombic 35° form of the Walter Tools VCGT110304FS‑1 WDN10 support fine surface finishes when used with appropriate feeds and rigid toolholding. Which toolholders are compatible with this insert geometry? VCGT‑style toolholders designed for 35° rhombic inserts accept the VCGT110304FS‑1 WDN10; ensure the holder supports PKD insert seating and clamping to maintain edge stability. How does the WDN10 PKD grade affect tool life? The WDN10 PKD grade provides high wear resistance in abrasive environments, reducing flank wear and extending usable tool life compared with conventional carbide grades in non‑ferrous machining. Is there technical support available for cutting parameters? Yes, Metav Werkzeuge can advise on cutting data and process setup for the VCGT110304FS‑1 WDN10 to match specific materials and machine conditions Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no commercial affiliation between our company and the named brands. The item offered is an original, factory‑new product from Walter Tools.
VCGT110304M-FP2 WEP10C Wendeplatten - Walter Tools
Benefit from the combination of WEP10C cermet grade and the FP2 chipbreaker with a 0.4 mm corner radius for consistent finishing and reproducible tool life; order directly via Metav Werkzeuge or consult the technical team for application matching. VCGT110304M-FP2 WEP10C – indexable turning insert, Rhombus 35°, 7° clearance | Walter Tools A VCGT110304M-FP2 WEP10C is an indexable turning insert designed for finishing and semi-finishing turning tasks in production machining, offering stable chip control and fine surface generation. *Rhombus 35° geometry for versatile turning *7° clearance angle for stable cutting *0.4 mm corner radius for precise finishing *WEP10C cermet grade for consistent tool life High-precision finishing with cermet reliability The combination of WEP10C (a cermet grade) and a small corner radius is engineered for fine surface finishes and tight tolerance work. Cermet-based grades deliver high hardness at elevated temperatures while maintaining edge stability, so fine turning and light finishing cuts produce reproducible results. The material behaviour is optimised for reduced built-up edge and stable wear patterns, which supports predictable process windows in serial production. Stable cutting and improved chip control Equipped with the FP2 chipbreaker, this insert is intended to control chip formation during finishing cycles, reducing long, stringy chips and improving machine safety. The Rhombus 35° geometry provides a balanced approach between approach angle and cutting force, which helps maintain toolholder stability and reduces vibration. As a result, cycle-to-cycle consistency is enhanced and post-process rework is minimised. Geometry tailored for flexible turning applications The small 0.4 mm corner radius and 7° clearance angle are selected to favour precision over heavy stock removal; this supports high-quality surface integrity and repeatable dimensional results when light depth-of-cut strategies are applied. The insert’s 11 size and 03 thickness are compatible with standard toolholder families for the VCGT form, enabling straightforward integration into existing turning setups while preserving rigidity and clamping security. Practical application notes and selection guidance The insert belongs to the Walter Cermet series and features a cermet cutting material; material suitability should be verified against the product matrix for specific workpiece materials and hardness ranges. For process optimisation, moderate cutting speeds and appropriate feed selection are recommended to exploit cermet wear characteristics. If unfamiliar with cermet grades, process engineers are advised to trial the insert under controlled conditions to establish baseline cutting data and ensure consistent performance. For production environments seeking precise finishing with cermet inserts, contact Metav Werkzeuge for tailored recommendations and availability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VCGT110304M-FP2-WEP10C-WALTER Designation: VCGT110304M-FP2 WEP10C Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 35° Plate size: 11 Thickness: 03 Special features / Versions Chipbreaker: FP2 Grade: WEP10C (cermet) Series: Walter Cermet Tolerance class: G Execution: T FAQ Which materials is this insert intended for? Material suitability varies by application; the VCGT110304M-FP2 WEP10C is a cermet grade and material compatibility should be checked in the product matrix or with technical advisors What is the purpose of the FP2 chipbreaker? The FP2 chipbreaker promotes controlled chip formation for finishing cuts, improving chip flow and reducing the risk of long, entangling chips during machining How does a 0.4 mm corner radius affect the result? A 0.4 mm corner radius favours fine finishing and improved surface integrity; it reduces cutting forces in light cuts but requires appropriate feed and depth settings to avoid premature edge damage Which toolholders accept this insert form? The VCGT form is compatible with standard VCGT indexable turning toolholders; the insert’s Rhombus 35° geometry should be matched to holders designed for that geometry to ensure correct seating and clamping Is this insert suitable for roughing operations? This insert is optimised for finishing and semi-finishing; for heavy roughing, a larger radius or different cutting grade would typically be recommended rather than the cermet WEP10C grade Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
VCGT110304ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of consistent wear resistance, precise Rhombic 35° geometry, and reliable chip control for steady turning results; order the insert directly via Metav Werkzeuge or contact our consultants for application guidance. VCGT110304ML-FX4 WEP01C indexable turning insert — Walter Tools — Rhombic 35° with FX4 chipbreaker The VCGT110304ML-FX4 WEP01C is an indexable turning insert in Rhombic 35° form, engineered for precision finishing and controlled chip formation in production turning operations. Walter Cermet series, WEP01C cermet grade Rhombic 35° geometry for stable cutting FX4 chipbreaker for reliable chip control 0.4 mm corner radius for fine surface finishes Consistent tool life and reproducible results for production environments The WEP01C cermet composition, part of the Walter Cermet series, is engineered to deliver consistent wear resistance and repeatable performance in high-volume turning. Cermet grades combine ceramic and metallic properties to resist abrasive wear and maintain a sharp cutting edge at higher cutting temperatures than standard carbides. This leads to more predictable tool life, reduced tool changes and fewer process interruptions — an advantage when a stable production flow and reproducible component quality are required. The certification class G tolerance supports interchangeability in automated tool systems. Predictable chip control and improved surface quality The FX4 chipbreaker is designed to produce short, uniform chips and to reduce the risk of chip entanglement at moderate feed rates. Combined with the Rhombic 35° geometry, the insert promotes a balanced cutting action and directional stability, which helps to produce a consistent surface finish with less vibration. The 0.4 mm corner radius supports refined edge strength and reduces the tendency for edge chipping during finishing passes, resulting in fewer rework cycles and a higher first-pass yield. Clear application guidance and practical compatibility notes Material suitability should be verified against the manufacturer’s product matrix; the insert’s cermet grade favours finishing and semi-finishing applications where wear resistance and surface integrity are priorities. Cermet inserts typically excel in medium- to high-speed finishing of a range of engineering materials. Because the exact substrate specification is catalogue-dependent, planners are advised to consult the Walter tools application tables for optimal cutting parameters and to match the insert to the intended workpiece material and machine capability. Ease of integration and handling benefits in the workshop The insert’s nominal size (11) and coded thickness (03) align with common toolholder systems, which simplifies stocking and changeover logistics. The modest 7° free cutting angle reduces radial cutting forces in many turning set-ups, contributing to dimensional stability on long parts. As an indexable item, the insert allows multiple edge uses per physical component, enhancing cost-effectiveness in repetitive production. Clear identification by the ISO-style designation aids rapid selection and ordering within procurement processes. Discuss Walter Tools inserts with Metav Werkzeuge to optimise turning processes and confirm the best cermet grade for the application — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for direct advice Technical Data Article number: VCGT110304ML-FX4-WEP01C-WALTER Type: Indexable turning insert Designation: VCGT110304ML-FX4 WEP01C Facts Geometry: Rhombic 35° Size: 11 (nominal) Thickness code: 03 Corner radius: 0.4 mm Free cutting angle: 7° Tolerance class: G Special features Grade: WEP01C (cermet) Series: Walter Cermet Chipbreaker: FX4 Execution: T Material specification: catalogue dependent FAQ What is the primary benefit of the WEP01C grade? The WEP01C cermet grade offers enhanced wear resistance and edge stability, making the insert suitable for finishing operations where consistent surface quality and longer tool life are priorities. Which chip form does the FX4 breaker produce? The FX4 chipbreaker generates short, controllable chips that reduce the risk of entanglement and facilitate safer, more reliable turning operations. How does the Rhombic 35° shape influence cutting behaviour? Rhombic 35° geometry provides balanced cutting dynamics and good access for profiling, improving directional stability and contributing to a consistent surface finish. Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com