VNMG220408-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP5 chipbreaker combined with the precise rhombic geometry to secure consistent, productive machining of steel; order the VNMG220408-MP5 WPP10G turning insert directly via Metav Werkzeuge or request application advice from the consultancy team. VNMG220408-MP5 WPP10G turning insert for steel — Walter Tools VNMG220408-MP5 WPP10G is a coated indexable turning insert engineered for robust chip control and reliable performance in steel machining applications. Tiger·tec Gold coated carbide grade WPP10G MP5 chipbreaker for stable chip control Rhombic 35° shape, 0.8 mm corner radius Negative geometry with 0° clearance angle Reliable performance for productive steel turning The VNMG220408-MP5 WPP10G is specified for the machining of steel (P) and brings measurable benefits to cycle stability and tool life. The WPP10G grade, developed within the Tiger·tec Gold family, is a coated carbide solution optimised for the heat and chip characteristics of steel. This results in predictable wear behaviour and fewer interruptions for tool changes. The MP5 chipbreaker supports consistent chip formation, which reduces the risk of built-up edge and improves surface finish while maintaining stable cutting forces for continuous operation. Geometry and coating explained for dependable results The insert’s rhombic 35° shape and 0.8 mm corner radius create a balanced engagement between the cutting edge and the workpiece, aiding accessibility in shoulder turning and profiling. The negative geometry with a 0° clearance angle provides increased edge strength for interrupted cuts and heavy-duty turning. Coating technology in the Tiger·tec Gold series offers a combination of hard surface layers and a tough substrate; in practice, this means the cutting edge resists abrasive wear while the substrate supports impact loads. For workshop planners, these design details translate into fewer tool indexes and more consistent component tolerances. Practical benefits in the production environment Integrating this indexable insert into toolholders with compatible negative top geometry results in efficient chip evacuation and extended edge life. The MP5 chipbreaker is tuned for steel cutting, producing manageable chips and reducing machine downtime linked to chip control issues. Operators benefit from reduced manual intervention and improved first-time-right rates. From a process-planning perspective, the combination of grade and geometry supports high material removal rates in roughing and reliable finishes in semi-finishing passes. Compatibility, handling and application notes The insert is supplied in the standard VNMG form factor and is intended for systems accepting rhombic 35° plates. The WPP10G grade is geared towards a range of steel types as defined by ISO 513; it offers an economical balance of wear resistance and toughness, suitable for many everyday turning tasks. When selecting cutting parameters, consider the enhanced edge strength afforded by the negative geometry: modest feeds combined with appropriate cutting speeds for steel will maximise the life advantages of the coated grade and chipbreaker design. For machining projects that demand consistent chip control and extended tool life, contact Metav Werkzeuge to discuss the VNMG220408-MP5 WPP10G turning insert, its best practice cutting data and suitability for specific steel grades — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VNMG220408-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte VNMG220408-MP5 WPP10G Walter Tools Product type: Turning insert (indexable) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Core data Plate size: 22 mm Thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Shape angle: 35° Tolerance class: M Special features Coated carbide substrate Chipbreaker: MP5 Suitable for: Steel (P) Rhombic 35° plate form Negative geometry for robust cutting FAQ Which materials is this insert designed for? The VNMG220408-MP5 WPP10G is designed primarily for steel (P) applications; the WPP10G grade and Tiger·tec Gold coating are tuned to handle the heat and chip formation typical of unalloyed and alloyed steels. What advantage does the MP5 chipbreaker provide? The MP5 chipbreaker promotes controlled chip formation and reliable evacuation when using the VNMG220408-MP5 WPP10G insert, which helps reduce the risk of built-up edge and improves surface consistency during turning operations. Can the negative 0° clearance geometry be used in interrupted cuts? Yes, the negative geometry with a 0° clearance angle increases edge support and makes the insert suitable for interrupted turning and heavy cuts, offering greater resistance to edge chipping under impact loads. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WPP10G grade provides a hard, wear-resistant surface combined with a tough substrate; this pairing extends tool life, particularly under the thermal and mechanical stresses of steel machining. What dimensional properties should be matched in the toolholder? Toolholders must accept VNMG format rhombic 35° plates and accommodate the specified plate thickness and tolerance class M to ensure correct seating, orientation and cutting geometry for consistent performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanatory purposes; there is no affiliation between our company and the brands named. The offered article is an original, factory-new product from the manufacturer.
VNMG220408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WPP20G coated-carbide grade and the MP5 chipbreaker for reliable, productive turning of steel; order the insert directly via Metav Werkzeuge or contact our consultants for process advice. VNMG220408-MP5 WPP20G indexable turning insert – for steel machining, Walter Tools VNMG220408-MP5 WPP20G is an indexable turning insert designed for general steel turning applications, combining a Tiger·tec Gold coating and an MP5 chipbreaker to deliver consistent chip control and extended tool life. Tiger·tec Gold coating for wear resistance Optimised MP5 chipbreaker for stable chips Rhombic 35° geometry for accurate profile control Engineered specifically for machining steel Longer tool life through advanced coating technology The combination of Tiger·tec Gold and the WPP20G carbide grade results in a pronounced increase in wear resistance and process stability. The coating reduces flank wear under typical steel turning temperatures, which translates into longer effective cutting intervals and fewer insert changes. For production environments this means reduced downtime and more predictable batch processing. The engineering behind Tiger·tec Gold aims to balance cutting-edge hardness with toughness to avoid premature chipping on interrupted cuts. Predictable chip formation and improved surface finish Equipped with the MP5 chipbreaker, this insert provides controlled chip segmentation and evacuation when turning a wide range of steels. The chipbreaker geometry is tuned to maintain a stable cutting zone, lowering the risk of built-up edge and producing a consistent surface finish. For operators, this reduces rework and inspection effort while preserving cycle time in serial production. The result is a reliable turning process with consistent part quality. Stable geometry for dimensionally accurate turning The rhombic 35° insert form and a corner radius of 0.8 mm deliver a good compromise between strength and precision. The positive profile control of the geometry supports repeatable part tolerances and steady tool engagement, especially in longitudinal and light profiling operations. The insert’s negative 0° rake gives cutting-edge support where rigidity is required, making it suitable for medium-depth turning and shoulder cuts common in steel components. Practical versatility and shop-floor economics Designed and graded for steel machining, this coated-carbide insert supports a broad spectrum of steels according to ISO group P. Its specification — including the VNMG designation and the WPP20G grade — allows straightforward selection for many turning tasks, simplifying tool planning. The insert’s performance characteristics support higher productivity through fewer tool changes and consistent results, offering a clear rational advantage in high-volume or mixed-run turning operations. Contact Metav Werkzeuge for tailored application guidance on the Tiger·tec Gold VNMG220408-MP5 WPP20G insert and ensure optimal insertion into existing turning processes — Metav Werkzeuge is ready to advise and supply. Technical data SKU: VNMG220408-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte VNMG220408-MP5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP20G Facts Plate size: 22 mm Thickness: 4 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Insert form: Rhombic 35° Coating: Tiger·tec Gold Substrate: Coated carbide Application: Steel (ISO P) FAQ What materials is this insert suitable for? This VNMG220408-MP5 WPP20G insert is specified for machining steel (ISO group P) and has been optimised for typical steel chip formation and heat conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and extends cutting intervals, which enhances process stability and reduces insert consumption. What type of chip control can be expected from the MP5 breaker? The MP5 chipbreaker provides controlled segmentation and evacuation, promoting reliable chip flow and helping to maintain consistent surface quality during turning of steel. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
WCGT020102-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WNN10, a Trigon 80° geometry and a precision FN2 chipbreaker to achieve stable chip control and consistent surface quality in turning and boring operations; order the insert via Metav Werkzeuge or consult the specialists for advice on application and tool set-up. WCGT020102-FN2 WNN10 — Trigon 80° turning and boring indexable insert by Walter Tools, coated carbide, FN2 chipbreaker WCGT020102-FN2 WNN10 is a hardened, coated indexable insert designed for versatile turning and boring tasks, offering a balance of edge robustness and surface-finish capability for workshop production environments Coated carbide grade WNN10 Trigon 80° geometry for versatility FN2 chipbreaker for controlled chips 0.2 mm corner radius for fine finish Consistent process results from a coated carbide grade The core advantage of this insert is the coated carbide composition of the WNN10 grade, which provides repeatable wear behaviour and extended edge life under a range of cutting conditions. As a coated hardmetal grade, WNN10 combines thermal and mechanical resistance with reliable cutting performance; this results in fewer interruptions for insert changes and more predictable tool costs per component. For production planning, the coated surface also helps reduce built-up edge and supports stable running at moderate to elevated cutting speeds. The specification advises checking the product matrix for detailed workpiece-material recommendations. Precision geometry that improves surface finish and entry behaviour The Trigon 80° shape with a 0.2 mm corner radius gives a controlled engagement with the workpiece, helping to reduce vibration and to produce consistent surface quality on external turning and light boring passes. A small corner radius reduces cutting load peaks and is suitable for finishing and semi-finishing operations where a fine profile is required. When mounted in the correct toolholder, the insert geometry supports tight tolerance keeping and repeatable edge contact, which benefits batch production and components requiring reliable dimensional conformity. Reliable chip control and predictable cutting action The FN2 chipbreaker has been developed for controlled chip formation on medium-to-thin chip cross-sections; its form assists in breaking and evacuating chips efficiently, reducing the risk of entanglement and re-cutting. Combined with a 7° relief angle, the insert achieves a favourable clearance-to-cut ratio that balances edge strength and cutting efficiency. This combination promotes smooth machining cycles and simplifies tool setting, particularly where consistent chip flow and minimal manual clearing are priorities. Selection and integration for workshop efficiency Tolerance class G, plate size 02 and plate thickness 01 make the insert suitable for common negative clamping systems and standard toolholders used in turning and boring operations. The product belongs to the Walter Schneidstoffsorte - Serie offen, offering straightforward procurement and inventory management for industrial workshops. Planners and operators benefit from the insert’s clarity of specification when matching it to holders and machines: the precise geometry and defined chipbreaker reduce trial-and-error in process set-up and support quicker ramp-up times for new production runs. Contact Metav Werkzeuge for tailored application advice and procurement of genuine Walter Tools inserts; specialists are available to advise on holder compatibility and process optimisation Technical Data SKU: WCGT020102-FN2-WNN10-WALTER Article designation: WCGT020102-FN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Execution: T Facts Relief angle: 7° Corner radius: 0.2 mm Plate form: Trigon 80° Plate size: 02 Plate thickness: 01 Tolerance class: G Chipbreaker: FN2 Special features Coated hardmetal grade WNN10 Designation without grade: WCGT020102-FN2 ISO designation: WCGT020102-FN2 WNN10 Application note: Check product matrix for material suitability FAQ What materials is this insert suitable for? The WCGT020102-FN2 WNN10 insert is a coated hardmetal grade; suitability depends on the specific workpiece material and cutting data. Consult the product matrix to confirm compatibility for individual steels, alloys or non-ferrous materials. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation and evacuation, which reduces the risk of chip entanglement and supports consistent surface quality when using the WCGT020102-FN2 grade in turning and light boring operations. What does the 0.2 mm corner radius mean for finish and tool life? A 0.2 mm corner radius provides a compromise between edge strength and surface finish: it supports finer surface quality in finishing passes while still offering sufficient edge robustness for routine production use. Is there a recommended relief angle for holder selection? The insert is specified with a 7° relief angle; selecting compatible negative toolholders and correct seating ensures optimal clearance and consistent cutting action for the WCGT020102-FN2 WNN10 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
WCGT020102-X15 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of precision geometry, material-specific grade and reliable chip control for efficient machining of aluminium and other non-ferrous metals; order the insert directly via Metav Werkzeuge or ask our consultants if needed. WCGT020102-X15 WAK15 — Drilling/Boring Indexable Insert, Trigon 80°, uncoated carbide (Walter Tools) The WCGT020102-X15 WAK15 is an indexable insert engineered for drilling and boring in aluminium and non‑ferrous materials, featuring a Trigon 80° form and an X15 chipbreaker for secure chip control Uncoated carbide for non‑ferrous metals Trigon 80° geometry for stable seating 0.2 mm corner radius for sharp edges X15 chipbreaker optimised for aluminium Maximise productivity when machining aluminium and non‑ferrous metals The combination of an uncoated carbide grade and a geometry optimised for non‑ferrous materials enables consistently high metal removal rates with reduced tendency for material adhesion. The WAK15 grade is designed as a sharp, wear‑resistant substrate specifically for aluminium and similar alloys, and the X15 chipbreaker helps to break and evacuate chips reliably. This reduces cycle time and minimises interruptions due to chip accumulation, which translates into a measurable improvement in throughput for production runs where lightweight metals dominate. Reliable edge performance and secure toolholding for constant results A Trigon 80° plate form combined with a 0.2 mm corner radius provides a balance between edge sharpness and mechanical strength. The modest 7° relief angle lowers friction at the cutting zone while maintaining sufficient support in the pocket, helping to protect the cutting edge under typical drilling and boring loads. Together with the Walter N‑Sortensystem metallurgy, this geometry supports reproducible component quality and surface finish without frequent index changes, promoting predictable tool life and stable machining conditions. Easy specification and straightforward application in production The insert’s format and dimensions make it compatible with standard Trigon toolholders and facilitate quick index changes during maintenance. As an indexable insert, it permits rapid rotation or replacement when the edge is spent, reducing downtime compared with brazed or solid tooling. Technical clarity in the product concept simplifies procurement and tooling planning: the plate designation, geometry and chipbreaker specification provide a clear basis for tool selection in applications focused on aluminium and other non‑ferrous metals. For application details or material‑specific recommendations, direct consultation ensures optimal cutting data and holder choice. Contact Metav Werkzeuge for application advice or to request delivery of the Walter Tools WCGT020102-X15 WAK15 insert; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: WCGT020102-X15-WAK15-WALTER Designation: WCGT020102-X15 WAK15 Type: Drilling/boring indexable insert Manufacturer: Walter Tools Series: Walter N‑Sortensystem Facts Relief angle: 7° Corner radius: 0.2 mm Plate form: Trigon 80° Plate size: 02 Plate thickness: 01 Tolerance class: G Execution: T Special features Uncoated carbide (WAK15) Optimised for aluminium and non‑ferrous metals X15 chipbreaker for controlled chip formation Designed for precision drilling and boring operations FAQ Is this insert suitable for aluminium machining? Yes. The WCGT020102-X15 WAK15 insert uses the WAK15 uncoated carbide grade and the X15 chipbreaker, which are specified for aluminium and other non‑ferrous metals to reduce built‑up edge and improve chip control. What geometry does the insert have and why does it matter? The insert is a Trigon 80° form with a 0.2 mm corner radius and a 7° relief angle; this combination ensures stable seating in the toolholder and a sharp cutting edge that balances surface finish and edge strength during drilling and boring. Can the insert be used in standard Trigon toolholders? Yes. The plate form and size correspond to common Trigon pockets; installation in compliant holders allows for quick indexing and secure clamping during operation. Is the cutting material coated? No. The WAK15 grade is an uncoated carbide developed for non‑ferrous applications where low adhesion and sharp edges are essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
WCGT020102-X15 WK1 WK1 Wendeplatten - Walter Tools
Benefit from the combination of robust uncoated carbide, a Trigon 80° geometry and a 0.2 mm corner radius to deliver consistent hole quality and reliable chip control; order the WCGT020102-X15 WK1 via Metav Werkzeuge or consult our team for application advice and cutting data WCGT020102-X15 WK1 — Drilling/Reaming Indexable Insert, Trigon 80° | Walter Tools The WCGT020102-X15 WK1 is a Trigon 80° drilling and reaming indexable insert in uncoated carbide, tailored for stable entry and predictable chip formation in general metalcutting applications Trigon 80° geometry for stable entry Uncoated carbide WK1 for general machining 7° relief angle for controlled cutting X15 chipbreaker for reliable chip formation Consistent hole quality and process reliability The triangular face and Trigon 80° design combine with a 0.2 mm corner radius to reduce vibration at entry and promote uniform tool contact. The X15 chipbreaker guides chips away from the cutting zone, lowering the risk of build-up and improving surface finish. For production environments this means fewer rejects and a steadier process window; for operators less adjustment is required between passes. Technical terms: the corner radius helps blunt the cutting edge slightly to improve strength, while the chipbreaker deflects and breaks chips to avoid tangling. Efficient production through predictable tool life Built in the WK1 grade as an uncoated carbide insert, this specification emphasises balanced wear resistance and toughness for a wide range of common materials. The grade is described as an uncoated cemented carbide; users should verify the exact material suitability against the product matrix before use. Predictable wear behaviour reduces unscheduled tool changes and supports planned maintenance intervals, improving overall throughput and lowering per-hole costs when integrated into automated drilling or reaming cycles. Easy integration and clear mounting data The insert is supplied in the Trigon 80° form with size 02 and thickness 01, tolerance class G, and a 7° relief angle, enabling straightforward replacement in compatible drilling and boring heads. The concise geometry and standard sizing help with inventory management and setup times in the toolroom. For new applications, consult the machine tool and holder manufacturer recommendations and use manufacturer cutting data as a starting point for feed and speed; adjustments are often small once the correct coolant strategy and clamping are established. Contact Metav Werkzeuge for tailored cutting data, availability and recommendations for the Walter Tools WCGT020102-X15 WK1 insert — Metav Werkzeuge is available to advise on suitable holders and process parameters Technical data Article number: WCGT020102-X15-WK1-WALTER Identification: WCGT020102-X15 WK1 Type: Drilling/reaming indexable insert Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.2 mm Insert form: Trigon 80° Insert size: 02 Thickness: 01 Tolerance class: G Chipbreaker: X15 Materials & features Grade: WK1 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Plate designation: WCGT020102-X15 Suitability: Check product matrix for material compatibility Execution: T FAQ What materials is this insert designed to machine? The WCGT020102-X15 WK1 insert is a WK1 uncoated carbide grade intended for general machining; specific material recommendations should be checked against the product matrix provided by the manufacturer How does the X15 chipbreaker affect performance? The X15 chipbreaker promotes controlled chip fragmentation and evacuation, improving surface finish and reducing the risk of chip buildup when machining with the WCGT020102-X15 WK1 insert Is the Trigon 80° form suitable for reaming as well as drilling? The Trigon 80° geometry provides stable entry and is suitable for both drilling and reaming operations when used in appropriate holders and with correct cutting parameters for the WCGT020102-X15 WK1 What should be considered for initial cutting data? Start from manufacturer guidance and adapt feed and speed based on the toolholder rigidity and workpiece material; the balanced properties of the WK1 grade give a reliable baseline for optimisation How is insert identification marked? Identification corresponds to the designation WCGT020102-X15 WK1 and the SKU WCGT020102-X15-WK1-WALTER, matching documentation and ordering references Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WCGT020102-X15 WTP35 Wendeplatten - Walter Tools
Benefit from precise chip control with the X15 chipbreaker and the wear-resistant WTP35 coated carbide, delivering reproducible cutting performance and consistent edge life; order the WCGT020102-X15 WTP35 via Metav Werkzeuge or consult our specialists for application advice. WCGT020102-X15 WTP35 — Trigon 80° indexable insert for drilling / boring | Walter Tools The WCGT020102-X15 WTP35 is a Trigon 80° indexable insert designed for drilling and boring operations, offering controlled chip formation and a stable cutting edge for demanding production environments. Trigon 80° geometry for stable entry X15 chipbreaker for reliable chip control WTP35 coated carbide for long edge life 7° clearance angle for reduced friction Consistent performance through optimised chip control The Trigon 80° geometry combined with the X15 chipbreaker produces predictable chip flow and reduced vibrations during entry and cutting phases. This design lowers the risk of irregular chip formation in interrupted cuts and contributes to a smoother drilling sequence. The result is improved process stability and fewer rework cycles, which supports higher throughput in mixed-production runs. Durable coated carbide grade for repeatable tool life Manufactured in the WTP35 coated carbide grade, the insert provides a balance between wear resistance and toughness suitable for general metalcutting tasks. The 0.2 mm corner radius and the 7° clearance angle protect the cutting edge under varying feed conditions, extending service intervals. For users assessing tool life versus productivity, this combination supports predictable replacement cycles and consistent surface quality. Practical application and machining guidance The insert’s indexable form and compact dimensions (Trigon 80°, plate size 02, thickness 01) make it appropriate for compact toolholders and multi-insert drilling solutions. The coated carbide specification implies compatibility with a wide range of workpiece materials; however, the concrete suitability should be verified against the product matrix for specific alloys and hardness levels. Clear, verifiable data on geometry and grade facilitates selection for production planning and process documentation. For tailored application support on Walter Tools inserts, contact Metav Werkzeuge to discuss machining parameters and toolholder compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a technical consultation regarding the WCGT020102-X15 WTP35 Technical Data Article number: WCGT020102-X15-WTP35-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WCGT020102-X15 WTP35 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WTP35 Execution: T ISO designation: WCGT020102-X15 WTP35 Facts Plate form: Trigon 80° Clearance angle: 7° Corner radius: 0.2 mm Plate size: 02 Plate thickness: 01 Chipbreaker: X15 Tolerance class: G Special features Coated carbide grade WTP35 Optimised chip control with X15 breaker Suitable for drilling and boring applications Compact design for multi-insert toolholders Series description: coated hardmetal insert FAQ What applications is this insert suited for? The WCGT020102-X15 WTP35 is intended for drilling and boring operations where stable chip control and reproducible edge life are required, particularly in production settings using multi-insert tool assemblies. How does the X15 chipbreaker affect machining? The X15 chipbreaker promotes controlled chip formation and evacuation, helping to reduce cutter vibration and improve process stability when the WCGT020102-X15 WTP35 is used in appropriate drilling setups. Is the WTP35 grade suitable for stainless steels? WTP35 is a coated carbide class; suitability for specific stainless steels or other alloys should be confirmed against the product matrix and machining parameters for the WCGT020102-X15 WTP35. Can the insert be indexed to restore cutting performance? Yes, the Trigon 80° form permits multiple indexing positions where applicable; this supports efficient use of the insert body and consistent cutting performance over several edge changes. What geometric data are relevant for toolholder selection? Key data for toolholder matching include the Trigon 80° plate form, plate size 02, thickness 01, corner radius 0.2 mm, and the 7° clearance angle listed for the WCGT020102-X15 WTP35. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCGT020102-X15 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, effective chip control and compatibility with the Walter N‑series for reliable drilling and reaming of non‑ferrous metals; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. WCGT020102-X15 WXM15 — Drilling/reaming indexable insert, WXM15 grade for non‑ferrous metals — Walter Tools A WCGT020102-X15 WXM15 insert engineered for efficient drilling and reaming in non‑ferrous materials, offering Trigon 80° support and a controlled chipbreaker geometry. Walter WXM15 uncoated carbide for non‑ferrous metals Trigon 80° profile for secure clamping 7° relief angle for smooth cutting action X15 chipbreaker for controlled chip flow Stable chip control for non‑ferrous machining The combination of the WXM15 uncoated carbide grade and the X15 chipbreaker provides dependable chip formation when machining aluminium, copper and brass. The uncoated hardmetal composition delivers a very sharp cutting edge and reduced adhesion tendency, which limits built‑up edge and improves surface finish. For shops processing NE‑group materials according to ISO 513, this insert reduces rework and downtime by keeping chips compact and evacuation predictable, thereby supporting consistent cycle times and improved tool life. Geometry that secures process reliability and repeatability The Trigon 80° profile and the modest 7° relief combine to offer stable seating in drilling and reaming tool bodies while maintaining the required clearance to avoid rubbing. A 0.2 mm corner radius balances edge strength and cutting aggressiveness: it reduces notch sensitivity yet keeps cutting forces moderate. These geometric choices mean fewer insert changes and more repeatable hole quality across batches, helping production environments that prioritise dimensional conformity and surface integrity. Practical integration and application benefits Designed for integration into the Walter N‑Sortensystem, this insert simplifies inventory selection and conversion across compatible toolholders. The uncoated grade is particularly suited to high‑feed or high‑speed tasks with non‑ferrous metals, where low friction and sharp edges are essential. For contract manufacturers and OEM workshops, the net effect is improved throughput and predictable costs per part, supported by the insert’s focused application range and clear ISO alignment. Secure process reliability with Walter Tools inserts — contact Metav Werkzeuge for tailored advice and availability on WCGT020102-X15 WXM15 Technical Data SKU: WCGT020102-X15-WXM15-WALTER ISO designation: WCGT020102-X15 WXM15 Product type: Drilling/reaming indexable insert Series: Walter N‑Sortensystem Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.2 mm Geometry: Trigon 80° Grade size: 02 Thickness: 01 Tolerance class: G Materials & features Grade: uncoated carbide (WXM15) Chipbreaker: X15 Suitable for: non‑ferrous metals (ISO N) Execution: T FAQ What materials is this insert intended for? The insert is designed primarily for non‑ferrous metals; the WXM15 grade and X15 chipbreaker make the insert suitable for aluminium, copper and brass machining according to ISO N. How does the Trigon 80° geometry affect hole quality? The Trigon 80° geometry provides secure seating and lateral support in the toolholder, which contributes to improved hole concentricity and repeatable surface results when using the WCGT020102-X15 WXM15 insert. Is the grade coated or uncoated, and what are the implications? The WXM15 grade is an uncoated carbide, offering very sharp edges that reduce material adhesion on NE‑materials; this supports better surface finish and lower cutting forces in many non‑ferrous applications. Which chip control behaviour can be expected from the X15 chipbreaker? The X15 chipbreaker is designed to produce short, controllable chips in softer metallic materials, improving evacuation during drilling and reaming and reducing the risk of entanglement or chip packing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the brands named. The offered article is an original, factory‑new product of Walter Tools.
WCGT020102-X25 WK1 WK1 Wendeplatten - Walter Tools
The Trigon 80° geometry combined with the WK1 uncoated carbide grade and the X25 chipbreaker ensures stable chip formation and consistent hole quality. Order the WCGT020102-X25 WK1 insert directly via Metav Werkzeuge or consult our technical advisers for suitability and application advice. WCGT020102-X25 WK1 — Drilling/Boring indexable insert, Trigon 80°, WK1 by Walter Tools The WCGT020102-X25 WK1 is a trigon 80° indexable insert designed for drilling and bore-enlargement operations where controlled chip flow and repeatable edge performance are required Trigon 80° geometry for axial stability Uncoated carbide grade WK1 for predictable wear Chipbreaker X25 for reliable chip control 0.2 mm corner radius for fine finishing Consistent hole quality through optimised geometry The trigon geometry with an 80° form and a 0.2 mm corner radius provides a balance between strength and precision, reducing the risk of burr formation while maintaining axial stability in holemaking. The chipbreaker X25 is engineered to manage micro‑chips effectively, which helps to avoid long, stringy swarf that can interrupt production. For users unfamiliar with insert classification, the WK1 designation denotes an uncoated carbide grade intended for general machining; the exact material suitability should be confirmed against the product matrix to ensure the grade matches the workpiece and cutting conditions. Predictable productivity and process security The combination of a robust geometry and the WK1 carbide grade supports steady cutting forces and predictable edge wear, which contributes to reduced stoppages and more consistent cycle times. This rational performance advantage is particularly relevant in batch production or mixed‑series machining, where repeatability is essential. Where process optimisation is sought, pairing the insert with the correct holder and cutting data will enhance tool life and surface finish. The Walter Tools pedigree reinforces the expectation of consistent tool life and process reliability. Practical handling and integration into existing toolsets The insert is supplied in a compact Trigon 80° format with design codes that match common drilling/boring toolholders. The listed codes indicate form and seat compatibility; for example, size code 02 and plate thickness 01 correspond to standardised insert dimensions. The 7° clearance angle supports contact reduction at the flank, improving tool engagement in bore operations. For mounting and clamping, use the recommended carrier and torque values; improper seating can lead to oscillation or premature wear. When machining exotic or heat‑resistant alloys, verify compatibility since the WK1 grade is an uncoated option and may not suit all high‑temperature materials. What to expect in cutting performance and finish Users can expect steady chip formation and a balanced trade-off between edge strength and finish quality. The 0.2 mm radius allows for close tolerance finishing where small radii help achieve smoother bore walls. While the insert provides a good baseline for a wide range of materials, adjustments to feed and speed are often necessary to reach optimum surface quality. If higher thermal resistance or extended life is required, consider coated grades or alternative manufacturers’ grades—bearing in mind the insert’s intended purpose and the Walter design philosophy that aims for stable cutting edges and controlled chip formation. For tailored advice on the Walter Tools WCGT020102-X25 WK1 insert and to arrange supply through Metav Werkzeuge, please contact Metav Werkzeuge for application guidance and ordering — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data Article number: WCGT020102-X25-WK1-WALTER Designation: WCGT020102-X25 WK1 Product type: Drilling/Boring indexable insert Manufacturer: Walter Tools Core specifications Free angle: 7° Corner radius: 0.2 mm Platen form: Trigon 80° Size code: 02 Plate thickness code: 01 Design & special features Carbide grade: WK1 (uncoated carbide) Chipbreaker: X25 Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G Execution: T Base designation: WCGT020102-X25 FAQ What operations is this insert suitable for? The WCGT020102-X25 WK1 insert is designed for drilling and bore‑enlargement operations where trigon geometry and the X25 chipbreaker support axial stability and controlled chip flow. Is the WK1 grade suitable for stainless applications? The WK1 grade is an uncoated carbide; suitability for rostfreier Stahl or other specific materials should be confirmed using the product matrix and cutting data, as material compatibility depends on workpiece alloy and machining conditions. What does the X25 chipbreaker do? The X25 chipbreaker is engineered to fragment and guide chips during cutting, improving chip evacuation and reducing the likelihood of swarf entanglement in bore operations. Can this insert be used for finishing passes? With its 0.2 mm corner radius, the insert can achieve improved surface finish in many bore applications, but final results depend on feed, speed, and holder rigidity. How should the insert be mounted? Use the correct Walter Tools holder specified for Trigon 80° inserts and follow the manufacturer’s clamping and torque recommendations to ensure seating integrity and repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools wird hier als Marke des Herstellers geführt.
WCGT020102-X5 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of precise aluminium machining, reliable chip control and a compact trigon geometry for consistent bore quality; order the insert directly via Metav Werkzeuge or ask the consultants for cutting data and supply options. WCGT020102-X5 WAK15 — Drilling/Reaming Indexable Insert, Trigon 80°, Chipbreaker X5 (Walter Tools) WCGT020102-X5 WAK15 is a trigon 80° indexable insert developed for drilling and bore-enlarging operations in aluminium and other non-ferrous metals. Trigon 80° geometry for stable cutting Uncoated carbide grade WAK15 for aluminium X5 chipbreaker for predictable chip control 7° clearance angle and 0.2 mm corner radius Precision chip control for non‑ferrous machining The WCGT020102-X5 WAK15 insert is specifically engineered for machining aluminium and similar non‑ferrous materials. The uncoated carbide composition of the WAK15 grade ensures a sharp cutting edge that reduces material adhesion and built‑up edge formation, common challenges when working with soft, gummy alloys. As a result, the insert delivers consistent chip formation and repeatable bore quality across batch production. This leads to predictable tool life and fewer interruptions for rework or tool changes, supporting throughput requirements in industrial environments. Geometry that improves process stability and hole quality The trigon 80° profile and a 7° clearance deliver a balance between strength and accessibility to the cutting edge. The defined corner radius 0.2 mm combines edge strength with the ability to produce clean hole walls and controlled surface finish. These geometric choices reduce vibration during drilling and reaming, improving concentricity and bore tolerance control. In practical terms, the insert’s shape helps maintain tool stability in guided drilling applications and contributes to lower scrap rates when machining delicate aluminium components. Chip management and series benefits for efficient production The X5 chipbreaker is designed to fragment and evacuate chips reliably during drilling and bore enlargement, which lowers the risk of recutting and thermal build‑up in the cutting zone. Good chip control also reduces the need for complex coolant strategies in many aluminium applications, enabling leaner processes. As part of the Walter N‑Series, the insert benefits from a coordinated system approach: grade geometry and chipbreaker are matched to support consistent cutting behaviour, making integration into existing toolholders and processes straightforward and efficient. Contact Metav Werkzeuge by eMail info@metav-werkzeuge.com or phone +49 2822 7131930 for tailored cutting data and rapid supply of Walter Tools WAK15 inserts Technical data Article number: WCGT020102-X5-WAK15-WALTER Designation: WCGT020102-X5 WAK15 Product type: Bohr-/Aufbohrwendeschneidplatte Core specifications Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Trigon 80° Insert size: 02 Thickness: 01 Tolerance class: G Features & applications Chipbreaker: X5 Series: Walter N-Sortensystem Grade: WAK15 (uncoated carbide) Suitable for: aluminium and non-ferrous metals Execution: T Material code: N FAQ What materials is this insert suitable for? The WCGT020102-X5 WAK15 insert is optimised for aluminium and other non‑ferrous metals; the WAK15 uncoated carbide grade minimises material adhesion during cutting. Why is an uncoated grade used for aluminium machining? Uncoated carbide such as WAK15 provides a very sharp edge and lower chemical affinity with aluminium, reducing the risk of built‑up edge and improving surface finish during drilling and reaming. How does the Trigon 80° shape affect drilling performance? A Trigon 80° geometry offers a stable cutting platform with an optimised cutting angle that improves hole quality and reduces vibration compared with more acute profiles. What benefit does the X5 chipbreaker deliver in production? The X5 chipbreaker promotes predictable chip fragmentation and evacuation, which enhances process stability, lowers recutting risk and supports higher productivity in serial machining. Which system series does this insert belong to and why does that matter? This insert is part of the Walter N-Sortensystem, which ensures matched geometries and chip control for consistent, repeatable cutting performance in production environments. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered article is original, factory‑new product of the manufacturer.
WCGT020102-X5 WK1 WK1 Wendeplatten - Walter Tools
Combining a robust Trigon 80° geometry with a 7° clearance and a 0.2 mm corner radius, this insert delivers dependable cutting stability and controlled chip formation. Order directly via Metav Werkzeuge or consult our specialists for grade selection and process integration. WCGT020102-X5 WK1 Drilling/Boring Indexable Insert — Trigon 80°, 7° clearance | Walter Tools The WCGT020102-X5 WK1 is an indexable insert for drilling and boring, designed to provide consistent chip control and a hardened cutting edge for general machining tasks. Trigon 80° insert geometry 7° clearance angle for secure cutting 0.2 mm corner radius for edge strength Uncoated carbide grade WK1 Reliable cutting performance for drilling and boring This insert’s Trigon 80° form combines a stable cutting centre with versatile engagement angles, helping to maintain consistent tool paths during plunge cuts and bore enlargements. The configured 7° clearance reduces flank contact and heat generation, which in turn supports edge stability and extends in-cycle consistency. Such geometry is particularly suitable where repeatable hole quality and predictable tool life are required. Grade and material characteristics explained The WK1 designation denotes an uncoated carbide grade intended for a broad range of applications; this composition emphasises toughness and reliable wear behaviour under varying cutting conditions. The 0.2 mm corner radius increases resistance to chipping at entry and exit, providing a balance between strength and dimensional accuracy. For economic machining, the uncoated grade can offer uncomplicated regrinding options and consistent performance where coating is not essential. Integration and practical advantages in production With a compact plate thickness and standard trigon form, the insert is straightforward to fit into common indexable holders and drill bodies that accept this insert geometry. The X5 chipbreaker and the open series designation support general chip control strategies; however, material-specific machining parameters should be verified against the manufacturer’s product matrix before series production. Using inserts with defined geometry and radius reduces secondary finishing and contributes to steady cycle times. For application advice or availability of the Walter Tools WK1 series, contact Metav Werkzeuge for expert guidance and fast handling: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: WCGT020102-X5-WK1-WALTER SKU: WCGT020102-X5-WK1-WALTER WPL designation: WCGT020102-X5 WK1 Product type: Drilling/boring indexable insert Core measurements Clearance angle: 7° Corner radius: 0.2 mm Plate form: Trigon 80° Plate thickness: 01 Plate size: 02 Tolerance class: G Special features Grade: WK1 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: X5 Execution: T Material designation: Katalogabhängig FAQ What materials is this insert suitable for? The WK1 grade is an uncoated carbide designed for general machining tasks; material suitability should be checked against the product matrix before series use, as indicated for the WCGT020102-X5 WK1 drilling/boring insert. Which insert geometry and angles are specified? The insert features a Trigon 80° form, a 7° clearance angle and a 0.2 mm corner radius, optimised for stable entry and chip control in drilling and boring operations. Is the insert coated? No, the WK1 designation indicates an uncoated carbide cutting material for this insert; the open series is intended for versatile use where coating is not required. How does the corner radius affect machining? A 0.2 mm corner radius increases edge strength and reduces chipping risk at bore entry and exit, improving repeatability and decreasing the likelihood of premature tool edge failure. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original factory-new product of the manufacturer.
WCGT020102-X5 WTP35 Wendeplatten - Walter Tools
Take advantage of a compact insert that combines a coated carbide grade for wear resistance with a Trigon 80° geometry and an efficient X5 chipbreaker to maintain steady production. The result is dependable cutting performance with controlled chips and versatile fitment for standard drilling and boring toolholders; order via Metav Werkzeuge or request application guidance from our consultants. WCGT020102-X5 WTP35 – Drilling/boring indexable insert, Trigon 80°, X5 chipbreaker | Walter Tools The WCGT020102-X5 WTP35 is a trigon 80° indexable insert designed for drilling and boring operations, delivering consistent chip control and wear resistance for general turning-related drilling tasks. Trigon 80° geometry for stable penetration WTP35 coated carbide for reliable wear resistance X5 chipbreaker for improved chip control 7° clearance angle for secure cutting action Precision geometry for predictable cutting results The trigon 80° shape provides a robust cutting edge that contributes to axial stability during entry and axial guidance in bore enlarging operations. Combined with the 7° clearance angle, this geometry reduces chatter risk and helps maintain concentricity in serial production. The insert’s small 0.2 mm corner radius supports good surface finishes without aggressive material removal, making the component suitable where dimensional control and repeatability matter. Reliable chip control and extended tool life Manufactured in the WTP35 coated carbide class, the insert is engineered for durable cutting performance under a range of moderate cutting conditions. The integrated X5 chipbreaker channels chips away from the cutting zone, lowering the incidence of built-up edge and promoting consistent evacuation in both short and interrupted cuts. As a result, operators achieve fewer stoppages for clearing and a steadier production rhythm, directly supporting higher process efficiency. Flexibility across holders and moderate applications The insert’s form and size allow straightforward integration into common drilling and boring toolholders designed for trigon inserts. Execution marked as “T” and the size/thickness coding correspond to standard indexable insert dimensions, easing inventory management and tool assembly. Material suitability should be verified against the manufacturer’s product matrix; the WTP35 grade is a coated carbide family item, and users should consult the matrix to confirm optimal cutting data for specific workpiece materials. Streamlined stocking and application support For procurement and application planning, the insert’s standardised ISO-style designation simplifies ordering and replacement across production lines. Keeping a selection of inserts with the X5 chipbreaker and trigon geometry reduces setup time when switching between related drilling tasks. For technical clarifications or assistance with selecting the correct grade for a particular workpiece, Metav Werkzeuge can provide detailed specification advice and supply compatibility information. Contact Metav Werkzeuge for precise advice on the Walter Tools WCGT020102-X5 WTP35 insert, including material suitability checks and application recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WCGT020102-X5-WTP35-WALTER Designation: WCGT020102-X5 WTP35 Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Grade: WTP35 Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Trigon 80° Size: 02 Thickness: 01 Chipbreaker: X5 Execution: T Special features Material class: coated carbide Material availability: catalogue-dependent Application note: verify workpiece suitability against product matrix Designed for standard drilling/boring toolholders FAQ What materials is this insert suited for? The WCGT020102-X5 WTP35 insert is a coated carbide grade; material suitability should be checked against the supplier’s product matrix to select optimal cutting data for specific steels and non-ferrous materials. Is the X5 chipbreaker suitable for interrupted cuts? Yes, the X5 chipbreaker is designed to improve chip control in a variety of machining situations, including short or interrupted cuts commonly encountered during holemaking and bore refinement. How does the Trigon 80° form influence performance? The Trigon 80° geometry offers a stable cutting edge with good axial guidance for drilling and boring, contributing to repeatable bore dimensions and reduced tendency to deflect under load. Can the insert be used in standard toolholders for trigon inserts? The insert’s form and size correspond to standard trigon insert dimensions, allowing compatibility with common drilling and boring holders designed for this insert type. What does the WTP35 designation mean? WTP35 denotes a Walter Tools coated carbide grade; it indicates a wear-resistant composition engineered for general industrial cutting, with specific performance details and recommended parameters available in the product matrix. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names belong to their respective owners. Mention of brand names is for explanation only and does not indicate any affiliation between our company and the manufacturers. The offered article is an original, factory-new product of the manufacturer.
WCGT020102-X5 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of the uncoated WXM15 carbide grade, the X5 chipbreaker and the Trigon 80° geometry for efficient, burr-free machining of non‑ferrous materials; order directly via Metav Werkzeuge or consult our specialists for application advice. WCGT020102-X5 WXM15 — Drill/bore-widening indexable insert, Trigon 80°, X5 chipbreaker | Walter Tools The WCGT020102-X5 WXM15 is a Trigon 80° indexable insert designed for drilling and bore‑widening operations in non‑ferrous metals, offering a sharp edge geometry and controlled chip formation for reliable series production. Trigon 80° geometry for stable cutting Uncoated WXM15 carbide for NE metals X5 chipbreaker for controlled chip formation Higher throughput through controlled chip evacuation The Trigon 80° geometry combined with the X5 chipbreaker delivers consistently shaped chips and reduced clogging, which supports higher uninterrupted cycle times on drilling units and boring heads. The sharp, uncoated WXM15 grade is optimised for non‑ferrous metals, minimising material adhesion and enabling stable cutting pressures. In practice, this means fewer interruptions for chip clearing and a steadier spindle load, directly improving production rates and repeatability on critical bores. Reliable edge condition for fine surface integrity A rounded corner radius 0.2 mm and a clearance angle of 7° preserve edge strength while limiting burr formation on soft alloys. This balance between edge sharpness and robustness ensures good surface quality in one pass and reduces the need for secondary finishing. The combination of geometry and grade is particularly suited to aluminium and messing (brass) where adhesion and smearing can compromise dimensional accuracy; the result is improved first‑pass acceptance and predictable downstream handling. Straightforward assembly into common toolholders The insert’s Trigon form and standard designation make integration into established indexable tooling systems uncomplicated; the ISO reference in the designation supports rapid holder selection and inventory management. The compact plate size 02 and thickness 01 allow installation in tight tool envelopes while maintaining clamping stability. As a result, process planners can adapt existing tool bodies with minimal modification, shortening setup times and preserving machine uptime. Class and application guidance for material groups Supplied in the Walter N‑Series, the WXM15 grade is an uncoated carbide developed expressly for NE‑group materials under ISO 513. The grade’s low tendency to build a built‑up edge and its geometrical pairing make it a practical choice for high‑feed and conventional cutting strategies when machining aluminium, copper and messing. For shops requiring repeatable bore quality without complex coatings or cutting fluids, this insert offers an economical route to consistent results. For a tailored recommendation and stock information on Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and delivery options. Technical data Article number: WCGT020102-X5-WXM15-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WCGT020102-X5 WXM15 Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Series: Walter N-Sortensystem Grade: WXM15 Manufacturer: Walter Tools ISO designation: WCGT020102-X5 WXM15 SKU: WCGT020102-X5-WXM15-WALTER Facts Plate form: Trigon 80° Clearance angle: 7° Corner radius: 0.2 mm Chipbreaker: X5 Plate size: 02 Plate thickness: 01 Execution: T Tolerance class: G Special features Uncoated carbide grade for non‑ferrous metals Optimised for aluminium, copper and brass (ISO 513 group N) Stable chip formation via X5 chipbreaker Compact Trigon geometry for tight tool envelopes Part of the Walter N‑Series for consistent grade allocation FAQ What materials is this insert best suited for? The WCGT020102-X5 WXM15 insert is tailored for non‑ferrous metals (ISO 513 group N) such as aluminium, copper and brass, offering low adhesion and good surface integrity. Is the grade coated or uncoated, and why does that matter? This insert uses the uncoated WXM15 carbide grade; the lack of coating reduces edge build‑up when machining soft alloys and facilitates sharper cutting edges for fine finishing. Which geometry ensures stability in bore‑widening tasks? The Trigon 80° geometry combined with the X5 chipbreaker promotes stable cutting and predictable chip flow, beneficial for bore‑widening and drilling operations where axial forces must be controlled. Can existing indexable holders be used with this insert? Yes; the ISO designation aligns with standard indexable insert interfaces, allowing straightforward integration into compatible holders without special adapters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the stated manufacturer. The Walter Tools brand is referenced for product identification purposes only.
WCGT020104-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the WNN10 coated carbide grade and the FN2 chipbreaker combined with the Trigon 80° geometry for reliable chip control and consistent tool life; order directly via Metav Werkzeuge or contact the consultants for application-specific advice. WCGT020104-FN2 WNN10 Trigon 80° indexable insert for drilling and turning – Walter Tools A WCGT020104-FN2 WNN10 indexable insert engineered for drilling, boring and turning applications, offering a 0.4 mm nose radius and a 7° clearance angle for controlled engagement and repeatable results WNN10 coated carbide grade Trigon 80° insert geometry FN2 chipbreaker for controlled chips 0.4 mm nose radius, 7° clearance Consistent geometry for repeatable machining results The Trigon 80° geometry delivers a stable cutting form that supports predictable tool behaviour across repetitive operations. The 0.4 mm nose radius reduces vibration while preserving profile accuracy, and the 7° clearance helps to avoid rubbing at the flank, lowering heat generation. These design choices translate into fewer interruptions, improved dimensional consistency and more reliable cycle times when the insert is used in compatible toolholders and processes. Efficient chip control and surface finish Equipped with the FN2 chipbreaker, the insert is tuned to produce short, manageable chips in a wide range of common turning and boring tasks. The combination of chip geometry and the WNN10 coated carbide matrix focuses on steady chip flow and reduced built-up edge, promoting a cleaner cutting zone and better surface quality. For full material suitability and optimal cutting parameters, consult the product matrix and match the grade to the specific workpiece material. Process security and cost-effectiveness The coated tungsten carbide composition designated as WNN10 is a productive choice where a balance of wear resistance and edge stability is required. The insert’s tolerance class G and standardised dimensions support consistent seating and clamping in indexed toolholders, reducing setup variability. This stability lowers the frequency of tool changes and stoppages, improving overall machine uptime and offering a favourable cost-per-component profile over extended production runs. Practical fit and handling in the tooling system With a plate size of 02 and thickness 01, the insert is compact and suited to holders designed for Trigon 80° geometry. The indexable nature allows rapid rotation or replacement of cutting edges to restore cutting performance without regrinding. When selecting a holder, ensure it is compatible with the Trigon 80° form and the insert thickness to maintain clamping security and repeatable positioning during changing cycles. Contact Metav Werkzeuge today for tailored application advice and to secure WCGT020104-FN2 WNN10 inserts from Walter Tools for prompt delivery Technical Data Article number: WCGT020104-FN2-WNN10-WALTER SKU: WCGT020104-FN2-WNN10-WALTER Manufacturer: Walter Tools Product type: Indexable insert for drilling, boring and turning Series: Walter Schneidstoffsorte - Serie offen Facts Insert form: Trigon 80° Corner radius: 0.4 mm Clearance/freestanding angle: 7° Chipbreaker: FN2 Plate size: 02 Plate thickness: 01 Tolerance class: G Special features Coated carbide grade WNN10 Suitable for indexable toolholders with Trigon 80° seat Designed for reliable chip control and stable cutting edge Sorteneinsatz: check product matrix for material suitability FAQ What operations is this insert intended for? The WCGT020104-FN2 WNN10 insert from Walter Tools is designed for drilling, boring and turning applications where Trigon 80° geometry and a controlled chipformer are required. How does the FN2 chipbreaker affect performance? The FN2 chipbreaker shapes chips to reduce entanglement and improve evacuation; on the WCGT020104-FN2 WNN10 this promotes steady cutting, fewer stoppages and more consistent surface quality. Which toolholders are compatible with this insert form? Holders that accept Trigon 80° inserts and match the plate thickness 01 will fit; always verify seat geometry and clamping method before mounting the WCGT020104-FN2 WNN10 insert. How should the cutting grade be selected for a specific material? The WNN10 designation denotes a coated carbide grade; material suitability depends on the product matrix, so consult the technical data sheet or Metav Werkzeuge consultants for the recommended cutting data. What is the recommended handling for indexable insert changes? Use the correct torque for the clamping screw and ensure the seating surface is clean; rotate or replace the insert on the holder as needed to maintain cutting performance and to avoid damage to the seat when using the WCGT020104-FN2 WNN10. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names and registered trademarks is for clarification only; there is no affiliation between our company and the named manufacturers. The offered item is original, factory-new goods of the manufacturer.
WCGT020104-X15 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, a chip‑controlling X15 breaker and the cost‑efficient uncoated WAK15 carbide for reliable, productive drilling and boring in aluminium and other non‑ferrous metals; order directly via Metav Werkzeuge or consult their specialists for application support. WCGT020104-X15 WAK15 Drill/boring indexable insert — X15 chipbreaker, WAK15 grade — Walter Tools The WCGT020104-X15 WAK15 is an indexable insert designed for drilling and bore‑enlargement operations, optimised for aluminium and other non‑ferrous metals and supplied in the Walter N‑series. WAK15 uncoated carbide grade for non‑ferrous metals X15 chipbreaker for secure chip control Trigon 80° form with 0.4 mm corner radius 7° clearance angle for low cutting friction Consistent chip control for non‑ferrous machining The insert’s core advantage is the combination of the X15 chipbreaker and the WAK15 uncoated carbide grade, which together reduce material adhesion and promote continuous chip formation when machining aluminium and similar materials. Uncoated carbide provides a very sharp cutting edge and a low‑friction contact area; this minimises the risk of built‑up edge and helps maintain dimensional stability over longer tool life. For manufacturers seeking predictable cycle times, this geometry supports faster feed rates while keeping surface quality within specification. Stable seating and repeatable accuracy at the tool holder The Trigon 80° form and a 0.4 mm corner radius create a secure insert seat that resists rotation and vibration under axial and radial loads. A 7° clearance angle reduces rubbing and lowers cutting forces, which leads to less heat generation and improved repeatability in series production. These geometric choices help maintain bore tolerances and extend the interval between indexings, contributing to a more stable production process and fewer interruptions for insert changes. Designed for efficient series production and material coverage Belonging to the Walter N‑Series, the grade and geometry are tailored specifically for ISO group N applications — non‑ferrous metals as defined in ISO 513. This means the insert is appropriate where sharp edges and low adhesion are required, and it enables efficient machining across a broad range of aluminium alloys and other NE‑metals. The result is an attractive cost‑to‑performance ratio for shops that process high volumes of light‑metal components and need consistent surface finish and dimensional control. Practical selection and handling guidance Insert codes such as the size and thickness identifiers are used for correct toolholder matching and inventory control; the size code 02 and the thickness code 01 indicate the insert dimensions for compatible drills and boring heads. The uncoated nature of the grade simplifies reconditioning choices and avoids coating‑related adhesion in aluminium work. When integrating these inserts into existing processes, ensure toolholder rigidity and correct seat cleanliness for best performance; the insert’s geometry delivers benefits only when installed in a properly aligned and clamped system. For tailored application advice on Walter Tools indexable inserts, or to discuss how the WCGT020104-X15 WAK15 can improve aluminium machining in current setups, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert recommendations. Technical Data SKU: WCGT020104-X15-WAK15-WALTER Designation: WCGT020104-X15 WAK15 Product type: Drill/boring indexable insert Series: Walter N-Sortensystem Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.4 mm Insert form: Trigon 80° Size code: 02 Thickness code: 01 Special features Chipbreaker: X15 Grade: WAK15 (uncoated carbide) Application: Aluminium and other non‑ferrous metals (ISO 513) Execution: T Tolerance class: G FAQ Is this insert suitable for steel machining? No. The insert grade and geometry are optimised for aluminium and other non‑ferrous metals; it is not intended for standard steel applications. What does the X15 chipbreaker deliver in practice? The X15 chipbreaker promotes controlled chip formation and evacuation in soft, ductile materials, reducing the tendency for long, stringy chips and improving process reliability. Can the uncoated WAK15 grade handle high feed rates? Yes. The WAK15 uncoated carbide offers a sharp edge and low adhesion characteristics that support higher feeds in non‑ferrous machining while maintaining surface quality. How does the Trigon 80° form affect bore accuracy? The Trigon 80° form provides a stable seating geometry that minimises insert movement and helps maintain repeatable bore dimensions under production loads. What codes identify the insert size and thickness? The size code 02 and thickness code 01 indicate the insert dimensions used to match compatible toolholders and boring heads. Manufacturer: Walter Tools (part of Sandvik group); AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the listed brands. The offered item is an original, brand‑new product from the manufacturer.
WCGT020104-X15 WTP35 Wendeplatten - Walter Tools
High process reliability and consistent chip control result from the combination of coated carbide WTP35 and the X15 chipbreaker; the 0.4 mm corner radius further supports improved surface finish. Benefit from the Trigon 80° geometry and 7° clearance for versatile holemaking — order directly via Metav Werkzeuge or request application advice from the consultants. WCGT020104-X15 WTP35 indexable insert — Trigon 80°, coated carbide by Walter Tools A WCGT020104-X15 WTP35 indexable insert designed for drilling and bore-enlarging operations, offering controlled chip formation and durable cutting performance in production settings. Coated carbide WTP35 for stable wear resistance Trigon 80° geometry for versatile holemaking 0.4 mm corner radius for improved surface finish X15 chipbreaker for controlled chip formation Predictable tool life through optimised grade and geometry The combination of a coated carbide grade and a dedicated chipbreaker provides measurable advantages in repeatable production. The WTP35 cutting grade is a coated carbide class that aims to deliver stable wear characteristics under typical drilling and bore-enlarging loads; this results in fewer unplanned tool changes and a steadier cycle time. The Trigon 80° form reduces the risk of chatter in interrupted cuts and supports a consistent cutting edge engagement. These features translate into a predictable service interval and simplified process planning for production engineers. Better productivity thanks to controlled chip behaviour Effective chip control reduces downtime and the need for secondary operations. The X15 chipbreaker is designed to fragment and evacuate chips reliably during holemaking, lowering the likelihood of chip packing and heat build-up. As a direct benefit, operators achieve improved surface quality and can often reduce finishing passes. The insert geometry and the 7° clearance angle combine to maintain a steady cutting force, which supports higher feed rates in many applications while keeping the required machining steps to a minimum. Easy selection and reliable integration into tool systems The insert is supplied in a compact programme format (size code 02, thickness 01) and with a 0.4 mm corner radius that suits common bore-enlarging tasks where surface integrity matters. The tolerances are specified as class G, and the insert is available in the Walter Schneidstoffsorte series; material suitability should be verified against the product matrix for specific applications. The concise data set allows straightforward toolholder matching and inventory management, helping procurement and production to coordinate replacement cycles and keep spares on hand. For application-specific advice or to source inserts from Walter Tools, contact Metav Werkzeuge — Metav’s consultants can recommend the optimal grade and chipformer for the intended material and process. Technical data Article number: WCGT020104-X15-WTP35-WALTER Designation: WCGT020104-X15 WTP35 Type: Indexable insert for drilling / bore-enlarging Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.4 mm Insert form: Trigon 80° Insert size: 02 Insert thickness: 01 Tolerance class: G Materials & features Carbide: coated hard metal (WTP35) Chipbreaker: X15 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material information: catalogue-dependent Application note: check product matrix for material suitability FAQ What materials is this insert suitable for? The WCGT020104-X15 WTP35 insert uses a coated carbide grade; material suitability must be checked in the product matrix to confirm compatibility with specific steels, alloys or non-ferrous materials. How does the X15 chipbreaker affect machining? The X15 chipbreaker on the WCGT020104-X15 WTP35 promotes controlled chip formation and evacuation, which helps maintain stable cutting conditions and improves surface quality during holemaking. Can the insert be used for finishing operations? With its 0.4 mm corner radius and Trigon 80° geometry, the insert supports operations where improved surface finish is required, though final suitability depends on the workpiece material and cutting parameters. What does the tolerance class G indicate? Tolerance class G specifies the manufacturing tolerance band for the insert, facilitating consistent clamping and repeatability when integrated into standard toolholder systems. Is the insert compatible with existing Walter toolholders? The insert form and size follow common Walter conventions; verify the toolholder interface and seat geometry to ensure correct fit for the WCGT020104-X15 WTP35 insert. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany *Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only. The listed item is an original, factory-new product of the manufacturer Walter Tools.
WCGT020104-X15 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, a Walter WXM15 grade for non-ferrous materials and stable chip control to increase process reliability and component quality; order the insert directly via Metav Werkzeuge or consult the technical team for application support. WCGT020104-X15 WXM15 — Drill/boring indexable insert, Trigon 80° (Walter Tools) The WCGT020104-X15 WXM15 is a drill/boring indexable insert engineered for efficient machining of non-ferrous metals in demanding production environments. Walter N-series grade WXM15 Optimised for non-ferrous metals Trigon 80° cutting geometry 7° clearance and 0.4 mm corner radius Efficient cutting in non-ferrous materials for higher throughput The insert is based on the WXM15 uncoated carbide grade from the Walter N-series, developed specifically for machining non-ferrous metals such as aluminium, copper and brass. The combination of a sharp cutting edge and the chosen grade reduces tendency for material adhesion and built-up edge, which leads to more consistent cycle times and fewer interruptions for tool cleaning. For production planners this translates into improved machine utilisation and predictable output. Geometry designed for stable cutting and consistent surface quality The Trigon 80° geometry and a 7° clearance angle deliver a favourable balance between cutting stability and access in bore enlargements. The 0.4 mm corner radius contributes to edge strength where occasional interruptions or minor vibration may occur, while the trigon form supports positive chip formation. These geometric choices support repeatable surface finish and reduce the need for secondary finishing on many aluminium and brass components. Application scope and compatibility with standard drilling/boring operations Intended for drill and bore enlargement operations, the insert is suited to ISO group N materials and performs well where low friction and sharp cutting edges are required. The chipbreaker X15 assists in producing short, controllable chips in common non-ferrous alloys, simplifying chip evacuation and protecting the workpiece surface. Integration into standard toolholders is straightforward, enabling established machining cycles to be maintained with minimal adjustment. Consistent supply, traceability and trustworthy brand performance As part of the Walter N-Sortensystem, the insert offers consistent lot-to-lot performance and straightforward grade identification for process documentation. Walter Tools’ established tool development supports reliable edge life and predictable wear behaviour in serial production. For planners and process engineers seeking dependable inserts for non-ferrous machining, this solution supports stability and reproducibility in daily manufacturing. For precision non-ferrous machining choose the Walter Tools WXM15 grade and contact Metav Werkzeuge for stocking status and tailored advice on toolholders and cutting data. Technical data Article number: WCGT020104-X15-WXM15-WALTER Designation: WCGT020104-X15 WXM15 Product type: Drill/boring indexable insert Manufacturer: Walter Tools Series: Walter N-Sortensystem Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Trigon 80° Plate size: 02 Plate thickness: 01 Tolerance class: G Design and features Grade: WXM15 Chipbreaker: X15 Uncoated carbide Suitable for non-ferrous metals (ISO group N) Execution: T FAQ What materials is this insert suited for? The WCGT020104-X15 WXM15 insert is intended for machining non-ferrous metals such as aluminium, copper and brass, following ISO group N recommendations. Is the cutting edge coated? No, the WXM15 grade in this insert is an uncoated carbide specifically tuned for low-adhesion cutting in non-ferrous applications. Which geometry ensures predictable chip formation? The Trigon 80° geometry combined with the X15 chipbreaker promotes short, controllable chips when machining non-ferrous alloys with this insert. Can this insert be used in existing boring toolholders? The insert is designed for standard indexable toolholders used in drilling and bore enlargement; toolholder compatibility should be verified by checking seat form and clamping dimensions. How does the corner radius affect performance? The 0.4 mm corner radius increases edge strength for occasional interruptions and helps maintain surface quality, particularly when machining softer non-ferrous materials. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
WCGT020104-X5 WAK15 Wendeplatten - Walter Tools
Combine the sharp cutting performance of the WAK15 grade with the compact Trigon 80° geometry and the X5 chipbreaker for efficient, clean aluminium machining; order the insert directly via Metav Werkzeuge or consult our specialists for application support. WCGT020104-X5 WAK15 — Drilling/reaming indexable insert, Trigon 80° for aluminium — Walter Tools The WCGT020104-X5 WAK15 is a Trigon 80° indexable insert engineered for high-performance machining of aluminium and other non-ferrous metals, offering a sharp, uncoated carbide edge for reliable chip control. Optimised for aluminium and non-ferrous metals Trigon 80° form, compact 0.4 mm corner Uncoated WAK15 carbide for sharp cutting edges Chipbreaker X5 for improved chip control Faster, cleaner aluminium machining with sharp grade and geometry The combination of the WAK15 uncoated carbide and the Trigon 80° form delivers a notably sharp cutting edge, which reduces built‑up edge and minimises material adhesion when machining aluminium and other non‑ferrous alloys. The insert’s geometry supports low cutting forces and steady engagement, so drilling and reaming operations run with fewer interruptions. For shops seeking higher throughput, this means shorter cycle times and improved surface integrity on finished bores. The uncoated WAK15 grade is optimised for the N material group and favours reaming and drilling where a clean, burr‑free finish is essential. Precision, stability and predictable tool life from controlled geometry A 0.4 mm corner radius and 7° clearance angle balance cutting strength and edge sharpness: the small corner radius permits fine surface finishes and accurate hole diameters, while the clearance angle prevents rubbing and heat build‑up. The chipbreaker X5 is designed to fragment and evacuate swarf efficiently in non‑ferrous applications, reducing clogging and improving process stability. These technical choices translate into repeatable bore quality and fewer rework cycles, which supports overall productivity and cost efficiency in production environments. Integration into production and practical benefits for workshop use Sized as insert 02 with a thickness designation of 01, the plate is compatible with standard toolholders that accept Trigon‑80 inserts, enabling straightforward retrofitting into existing tool assemblies. The insert’s designation and tolerance class support consistent indexing and quick replacement, shortening downtime during tool changes. Walter Tools’ established focus on precision tools adds an element of reliability: the proven geometry and material pairing reduce scrap rates and foster dependable results across batches, making this insert a practical choice for machining operations that prioritise throughput and finish quality. For reliable aluminium machining with Walter Tools' WAK15 grade and Trigon 80° geometry, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WCGT020104-X5-WAK15-WALTER Designation: WCGT020104-X5 WAK15 Type: Drilling/reaming indexable insert Series: Walter N-Sortensystem Grade: WAK15 Facts Relief angle / clearance: 7° Corner radius: 0.4 mm Insert form: Trigon 80° Size: 02 Thickness: 01 Tolerance class: G Chipbreaker: X5 Execution: T Special features Material group: N (non‑ferrous metals) Suitable for aluminium and other non‑ferrous metals Uncoated carbide grade optimised for sharp edges Walter design for stable chip formation and repeatability FAQ What materials is this insert intended for? The WCGT020104-X5 WAK15 insert is intended for aluminium and other non‑ferrous metals (material group N), providing geometry and edge sharpness tailored to these materials. What does the 0.4 mm corner radius mean for bore quality? A 0.4 mm corner radius provides a compromise between a sharp cutting edge and edge strength, producing a smooth surface finish and good dimensional control in drilling and reaming operations. Is the insert coated? The WAK15 grade specified for this insert is an uncoated carbide formulation, chosen to maintain a very sharp edge and minimise material adhesion when machining soft non‑ferrous alloys. How does the X5 chipbreaker benefit machining? The chipbreaker X5 promotes controlled fragmentation of swarf and reliable evacuation, which reduces clogging and enhances process stability when cutting aluminium and similar alloys. Which insert form and size should be ordered for this SKU? The item is supplied as a Trigon 80° form, size 02, thickness 01; use the designation WCGT020104-X5 WAK15 when ordering to ensure compatibility with the intended toolholder. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and brand names remain the property of their respective owners and are used here for descriptive and explanatory purposes only. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory‑new article of the manufacturer.
WCGT020104-X5 WTP35 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, a coated carbide grade for wear resistance and effective chip control for consistent drilling and enlarging operations; order directly via Metav Werkzeuge or consult our specialists for application support. WCGT020104-X5 WTP35 — drilling/reaming indexable insert, Trigon 80°, 7° relief (Walter Tools) WCGT020104-X5 WTP35 is a drilling and enlarging indexable insert designed for stable machining with a Trigon 80° form and a 7° relief angle, suitable for integration into standard toolholders. Coated carbide grade WTP35 Trigon 80° geometry for rigidity 7° relief angle for reduced rubbing Chipbreaker X5 for controlled chips Enhanced wear performance for rotary cutting The combination of a coated carbide substrate and the Walter Schneidstoffsorte WTP35 delivers improved resistance to abrasive wear and preserves the cutting edge over extended cycles. Coating layers reduce built-up edge formation and support consistent surface quality during drilling and reaming sequences. The insert’s Trigon 80° form increases mechanical stability at the cutting zone, which is especially beneficial in applications that require repeated indexing and reliable edge life. For material suitability, the product matrix should be consulted to match the carbide grade to the workpiece. Geometry and chip control that aid process reliability The chipbreaker X5 is designed to shape and evacuate chips efficiently, lowering the risk of chip re-cutting and runout-related interruptions. A corner radius of 0.4 mm contributes to a balanced edge strength and surface finish, while the 7° relief angle reduces flank contact and friction during entry and exit phases. These geometric choices support repeatable tool performance and make the insert compatible with a range of drilling and enlarging strategies. Technical terms: the Trigon shape provides three main cutting edges per index position and an 80° included angle for increased rigidity compared with acute-angle inserts. Practical integration and selection advice for production The insert is supplied in the Walter Schneidstoffsorte — Serie offen and is identified as WCGT020104-X5 WTP35 for straightforward ordering and stock control. Selection should consider clamping arrangement, holder compatibility and cutting data derived from the workpiece material; the tool matrix offers recommended parameters. For batch production, consistent edge life translates into lower setup time and predictable tool change intervals. If the application or material is unclear, please consult the product matrix or request tailored recommendations to ensure the insert meets the required process specifications. For application advice or to place an order for Walter Tools inserts, contact Metav Werkzeuge for technical consultation and availability — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: WCGT020104-X5-WTP35-WALTER Product name: WCGT020104-X5 WTP35 Product type: Bohr-/Aufbohrwendeschneidplatte (drilling/reaming indexable insert) Facts Relief angle: 7° Corner radius: 0,4 mm Plate form: Trigon 80° Plate size: 02 Plate thickness: 01 Tolerance class: G Special features Grade: WTP35 (Walter Schneidstoffsorte) Schneidstoffklasse: coated carbide Chipbreaker: X5 Series: Walter Schneidstoffsorte - Serie offen Material designation: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability depends on the specific product matrix; the WCGT020104-X5 WTP35 insert is a coated carbide grade and the product matrix should be consulted to confirm compatibility with the intended workpiece. How does the Trigon 80° form affect machining stability? The Trigon 80° geometry increases rigidity at the cutting edge, which helps the WCGT020104-X5 WTP35 insert maintain consistent performance in rotary operations and supports repeated indexing. What benefit does the chipbreaker X5 provide? The chipbreaker X5 improves chip formation and evacuation, reducing the chance of chip-related interruptions and contributing to more stable drilling and enlarging cycles with the WCGT020104-X5 WTP35. Is the corner radius of 0.4 mm suitable for finishing cuts? A corner radius of 0,4 mm balances edge strength and surface finish; for fine finishing operations, confirm the cutting data in the product matrix to match the required surface quality. Where to obtain cutting data and application guidance? Cutting data and tailored application recommendations are available via Metav Werkzeuge or the detailed product matrix; these sources should be used to define speeds, feeds and holder choices for the WCGT020104-X5 WTP35 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, brand-new product of Walter Tools.
WCGT020104-X5 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp cutting geometry, the X5 chipbreaker and the Walter N‑Series uncoated carbide grade for efficient, low‑adhesion machining of non‑ferrous metals. Order the WCGT020104-X5 WXM15 directly via Metav Werkzeuge or ask our consultants if needed. WCGT020104-X5 WXM15 drilling/bore indexable insert by Walter Tools — X5 chipbreaker, Trigon 80° The WCGT020104-X5 WXM15 is an indexable drilling and boring insert engineered for high‑productivity machining of non‑ferrous metals in demanding production environments. Uncoated carbide for non‑ferrous metals X5 chipbreaker for controlled chips Trigon 80° form, 0.4 mm corner radius 7° clearance angle for sharp engagement Precision performance where non‑ferrous materials matter The insert is designed from uncoated carbide (grade WXM15) to deliver consistent cutting behaviour when working with non‑ferrous metals such as aluminium and copper. The material choice and cutting geometry reduce built‑up edge and minimise material adhesion, which translates into fewer interruptions in the machining cycle and more predictable part quality. This makes the component especially suited to series production and applications that demand steady surface finish and dimensional control. Chip control and geometry that stabilise the process The combination of the X5 chipbreaker with a Trigon 80° shape and a 0.4 mm corner radius promotes short, controllable chips and reduces the risk of chip entanglement in through‑hole or blind drilling operations. A 7° clearance angle ensures fast entry and reduced cutting forces, which helps maintain tool stability during plunge cuts. These geometric choices support higher feed rates and contribute to improved cycle times without compromising component integrity. Practical benefits for a reliable shop‑floor workflow Built to Walter Tools’ N‑Series specifications and supplied in tolerance class G, the insert offers straightforward indexability and repeatable seating in standard pockets. The design prioritises process reliability: consistent chip formation, predictable wear patterns and simple handling for quick insert changes. For operations focused on non‑ferrous machining, this results in less rework and a smoother production flow, backed by a technically clear specification for tool setup. For precision machining of aluminium and copper with the Walter N‑Series WXM15 insert, contact Metav Werkzeuge for tailored advice and stock information — eMail info@metav-werkzeuge.com, Tel. +49 2822 7131930 Technical data Article number: WCGT020104-X5-WXM15-WALTER Name: WCGT020104-X5 WXM15 Manufacturer: Walter Tools Product type: Drilling/bore indexable insert Series: Walter N‑Sortensystem Grade: WXM15 Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Trigon 80° Size: 02 Thickness: 01 Chipbreaker: X5 Tolerance class: G Special features Uncoated carbide (WXM15) Suitable for non‑ferrous metals (ISO group N) Sharp cutting geometry for low adhesion Designed for drilling and boring applications FAQ Which materials is this insert intended for? The WCGT020104-X5 WXM15 is specified for non‑ferrous metals (ISO group N), notably aluminium and copper, where reduced adhesion and sharp cutting edges are required. What is the purpose of the X5 chipbreaker? The X5 chipbreaker on the WCGT020104-X5 promotes short, controlled chips to improve evacuation and reduce the likelihood of chip jamming during drilling and boring operations. How does a 0.4 mm corner radius affect part quality? A 0.4 mm corner radius balances edge strength and finish: it increases corner robustness compared with a razor edge while still enabling fine surface quality on non‑ferrous materials. Is the WXM15 grade coated? No, WXM15 is an uncoated carbide grade formulated for excellent performance on non‑ferrous alloys and reduced material adhesion in these applications. What does tolerance class G mean for tool setup? Tolerance class G indicates reproducible manufacturing tolerances that support consistent seating and repeatable positioning in indexable toolholders, simplifying tool change and setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation purposes only and do not indicate any affiliation. The offered item is an original, brand‑new product from the manufacturer.
WCGT030202-FM2 WSM21 T Wendeplatten - Walter Tools
Take advantage of the combination of high heat resistance, stable cutting edge and precise geometry to secure reliable turning and boring of difficult-to-cut materials; order the insert through Metav Werkzeuge or contact our consultants for application advice and delivery options. WCGT030202-FM2 WSM21 — Trigon 80° indexable insert for rostfreier Stahl and superalloys | Walter Tools A WCGT030202-FM2 WSM21 indexable insert designed for turning and boring operations in demanding materials, offering a Trigon 80° form and a chipbreaker optimised for secure chip control. Coated carbide grade WSM21 for high heat resistance Trigon 80° geometry for secure seat and stability FM2 chipbreaker for improved chip control 7° clearance angle and 0.2 mm corner radius Machined for difficult-to-cut alloys to maintain throughput and tool life The insert is based on a coated carbide grade that is tailored to resist thermal load and edge wear when machining rostfreier Stahl and heat‑resistant superalloys. Its WSM21 composition supports stable chip formation and keeps the cutting edge intact under the strains typical of high‑temperature cutting. For production environments where downtime is costly, the material selection and coating reduce the frequency of tool changes, contributing to a measurable improvement in process uptime. Geometry and chip control that reduce rework and improve surface quality The Trigon 80° shape combined with a FM2 chipbreaker provides consistent chip flow and a secure clamping fit in compatible toolholders. The insert’s 7° clearance angle and 0.2 mm corner radius enable a predictable cutting engagement that reduces vibration and minimises workpiece distortion. These geometric features translate into fewer rejected parts and a more reliable surface finish, particularly when turning materials prone to work‑hardening or built‑up edge formation. Practical benefits for workshop efficiency and process safety With a small footprint and indexable design, the insert supports quick indexing and straightforward stock management. The combination of stable cutting edge and the selected chipbreaker lowers cutting forces and assists coolant penetration where required, enabling safer high‑feed or interrupted cuts. For engineering teams seeking to validate cutting data, the insert’s defined geometry simplifies parameter calculation and promotes reproducible results across batches. For robust, repeatable machining of rostfreier Stahl and superalloys, request this Walter Tools insert via Metav Werkzeuge and consult our technical advisors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored application support. Technical data Article number: WCGT030202-FM2-WSM21-WALTER Designation: WCGT030202-FM2 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Grade: WSM21 Core data Plate form: Trigon 80° Plate size: 03 Plate thickness: 02 Clearance angle: 7° Corner radius: 0,2 Tolerance class: G Materials & special features Chipbreaker: FM2 Material suitability: S / M Suitable for: rostfreier Stahl and heat‑resistant superalloys (per grade designation) Execution: T FAQ What materials is this insert suitable for? The WCGT030202-FM2 WSM21 insert is specified for machining rostfreier Stahl and heat‑resistant superalloys, reflecting the WSM21 grade’s focus on thermal resistance and edge stability. How does the FM2 chipbreaker affect machining performance? The FM2 chipbreaker improves chip formation and evacuation, which supports consistent cutting and reduces the likelihood of built‑up edge when turning tough alloys. Is the Trigon 80° form compatible with standard toolholders? Yes, the Trigon 80° geometry is a common seat form that fits compatible indexable toolholders; correct clamping ensures the insert’s stability and performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WCGT030202-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Combining the Trigon 80° geometry, FN2 chipbreaker and WNN10 coated carbide, this insert provides reliable chip control and repeatable edge life; order through Metav Werkzeuge or consult our specialists for application-specific advice. WCGT030202-FN2 WNN10 — Trigon 80° indexable cutting insert for drilling and turning, Walter Tools WCGT030202-FN2 WNN10 is an indexable cutting insert designed for drilling, boring and general turning applications where stable chip formation and consistent cutting performance are required Trigon 80° geometry for stable engagement FN2 chipbreaker for controlled chip evacuation Coated carbide grade WNN10 for consistent wear resistance 0.2 mm corner radius for precise edge definition Consistent cutting geometry for predictable results The Trigon 80° shape and defined corner radius 0.2 mm deliver a repeatable cutting profile that reduces vibration and improves workpiece finish. The insert’s geometry is engineered for stable engagement during interrupted cuts and bore-entry operations, which leads to lower tool chatter and more reliable dimensional control. As a result, the toolholder setup and process parameters remain steady over longer production runs, supporting higher first-pass quality and reduced rework. Controlled chip formation and surface quality Equipped with the FN2 chipbreaker and manufactured in the WNN10 coated carbide grade, this insert supports predictable chip formation and efficient evacuation. The combination of chipbreaker geometry and coating reduces built-up edge and wear propagation, helping to maintain surface integrity on interrupted cuts. Where material compatibility is critical, the insert’s series designation indicates a coated cemented carbide; users should consult the product matrix to confirm suitability for specific alloys and hardness ranges. Integration, tolerance and operational benefits Tolerance class G and standardised dimensions (size 03, thickness 02) ensure interchangeability across compatible toolholders and quick insert indexing. The relief angle 7° supports cutting stability in both radial and axial engagements, while the compact radiused edge enables tight corner control in finishing passes. For workshops seeking process predictability, this insert represents a balance of economical indexability and predictable tool life, contributing to steady productivity and easier process planning. For application advice, toolholder compatibility checks or to procure Walter Tools WCGT030202-FN2 WNN10 inserts, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or telephone +49 2822 7131930 for prompt, expert assistance Technical data SKU: WCGT030202-FN2-WNN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte WCGT030202-FN2 WNN10 Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Grade / Sort: WNN10 Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 7° Corner radius: 0.2 mm Plate shape: Trigon 80° Plate size: 03 Plate thickness: 02 Chipbreaker: FN2 Tolerance class: G Execution: T Special features Coating / Material: Katalogabhängig ISO designation: WCGT030202-FN2 WNN10 Base designation: WCGT030202-FN2 Additional info: Serie: Walter Schneidstoffsorte - Serie offen; Sorte: WNN10; Schneidstoffklasse: beschichtetes Hartmetall; Sorteneinsatz prüfen anhand Produktmatrix UID: WCGT030202-FN2-WNN10-WALTER FAQ What materials is this insert intended for? The WCGT030202-FN2 WNN10 insert is a coated carbide grade from Walter Tools; suitability depends on the specific workpiece material—refer to the product matrix to confirm compatibility. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of built-up edge when the correct cutting parameters are applied with this Walter Tools insert. What does the Trigon 80° form mean for tool setup? Trigon 80° geometry gives a robust engagement angle suitable for drilling and turning entries, offering stable cutting forces and improved resistance to vibration compared with more acute shapes. Can the insert be used for finishing passes? With its 0.2 mm corner radius and coated grade, the insert is appropriate for semi-finish and certain finish operations, provided cutting data and machine rigidity match the application. How interchangeable is this insert in existing holders? Tolerance class G and the standardised size/thickness codes (03 / 02) support interchangeability with holders designed for this insert family; always check holder compatibility before mounting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
WCGT030202-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, reliable chip control and a coated-carbide grade designed for extended tool life to keep machining stable and productive; order the insert via Metav Werkzeuge or ask the consultants for application guidance. WCGT030202-MN2 WNN10 – Trigon 80° indexable insert with MN2 chipbreaker by Walter Tools The WCGT030202-MN2 WNN10 is a Trigon 80° indexable insert intended for turning and boring applications, offering a compact geometry with a 0.2 mm corner radius and a 7° free angle for adaptable machining tasks. Trigon 80° geometry for versatile turning 0.2 mm corner radius for precise edge form MN2 chipbreaker for controlled chip formation Coated carbide WNN10 for extended tool life Reliable geometry that improves process stability The Trigon 80° shape provides a stable cutting platform that supports a wide range of turning and boring operations, making it suitable for jobbing and series production alike. The moderate 7° free angle reduces rubbing and helps maintain consistent contact conditions at the cutting edge, which can lower cutting forces and contribute to predictable tool behaviour. With a focused geometry, cycle times remain efficient while tool change frequency can be reduced through steady edge performance. Controlled chip formation and surface quality Equipped with the MN2 chipbreaker, this insert is engineered for dependable chip control and evacuation, a key factor when striving for repeatable surface finish and reduced rework. The 0.2 mm corner radius balances edge strength and achievable surface quality, enabling fine finishes where edge definition matters. The combination of chip control and edge form supports measurable productivity improvements in automated turning cells and conventional lathes. Material grade and application guidance for reliable results The insert is supplied in the WNN10 grade, a coated carbide designed to extend tool life while offering broad applicability; compatibility with specific workpiece materials should be verified against the manufacturer’s product matrix. The designation and series information clarify the insert’s construction and intended use, but for precise material pairings and recommended cutting data consult the technical documentation or Metav Werkzeuge’s application advice to align tool, machine and process parameters effectively. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools' WCGT030202-MN2 WNN10 inserts into production and for availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: WCGT030202-MN2-WNN10-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Free angle: 7° Corner radius: 0.2 mm Insert shape: Trigon 80° Insert size: 03 Thickness: 02 Tolerance class: G Chipbreaker: MN2 Materials & features Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Designation: WCGT030202-MN2 Material: Katalogabhängig FAQ What types of machining is this insert designed for? The WCGT030202-MN2 WNN10 insert from Walter Tools is intended primarily for turning and boring operations where Trigon 80° geometry and controlled chip formation are advantageous. Which chip control characteristics can be expected? The MN2 chipbreaker on the WCGT030202-MN2 WNN10 promotes consistent chip segmentation and evacuation, supporting improved surface finish and reduced risk of chip entanglement. What are the key dimensions to consider when selecting this insert? Key dimensions are: free angle 7°, corner radius 0.2 mm, Trigon 80° shape, insert size 03 and thickness 02; tolerance class is G. Is the insert coated and what is the material grade? The insert is supplied in the WNN10 grade, described as a coated carbide, combining wear resistance with broad application potential. How should material suitability be verified for specific parts? Material suitability for the WCGT030202-MN2 WNN10 should be checked against the manufacturer’s product matrix to ensure optimal grade selection and cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the listed brands. The offered article is original factory-new goods of the manufacturer.
WCGT030202-X15 WAK15 Wendeplatten - Walter Tools
Benefit from efficient, adhesion‑free machining of non‑ferrous alloys and consistent insert seating for repeatable results; the combination of a sharp, uncoated carbide grade and a trigon geometry ensures reliable aluminium performance. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. WCGT030202-X15 WAK15 indexable insert — Trigon 80°, 7° relief, Walter Tools WCGT030202-X15 WAK15 is an indexable insert designed for high‑productivity drilling and boring operations in non‑ferrous alloys, optimised for aluminium and similar materials For aluminium and non‑ferrous metals Trigon 80° form with 7° relief Uncoated carbide grade WAK15 High‑efficiency machining of non‑ferrous alloys The combination of a Trigon 80° geometry and a 7° relief produces stable cutting behaviour and effective chip formation when working with soft, adhesion‑prone materials. The trigon shape distributes cutting forces and improves tool life in interrupted cuts, while the relief angle reduces rubbing and heat generation. This delivers a measurable increase in throughput and lowers the risk of material build‑up on the edge when processing aluminium and other non‑ferrous metals. Secure seating and repeatable clamping for consistent results A robust geometry and tight tolerance class G ensure reliable seating in indexable toolholders, supporting repeatable component quality across production runs. The compact trigon form promotes even load distribution and reduces micro‑vibration, which improves surface finish and extends the lifetime of both tool and holder. Operators benefit from predictable tool change intervals and fewer process interruptions. Sharp, uncoated carbide grade for adhesion‑free cutting The WAK15 uncoated carbide grade is optimised for adhesion‑sensitive materials; its sharp cutting edge minimises material transfer and prevents built‑up edge formation. In practice, this results in cleaner holes and bores, reduced rework and lower scrap rates in series production. For users seeking a straightforward grade that performs reliably without specialised coatings, this option simplifies tool selection and inventory. Chip control and practical application benefits The chipbreaker X15 geometry supports short, controllable chips that evacuate easily from drilled cavities, lowering the chance of recutting and tool damage. Controlled chip form reduces tool‑holder heat and contributes to steady cutting forces, which in turn stabilises spindle load. These factors translate into improved process stability and fewer unplanned stoppages on CNC drilling and boring equipment. Practical recommendations for machining aluminium For best results with this insert, choose moderate feeds and cutting speeds adapted to the workpiece grade and machine rigidity; ensure stable clamping and effective coolant or air blow‑off to clear chips. The trigon form and uncoated grade favour finishing and semi‑finishing operations in softer alloys. When switching from coated grades, expect reduced adhesion and a more consistent surface finish with less need for manual cleaning. For process‑secure aluminium machining with Walter Tools inserts, contact Metav Werkzeuge for sample availability and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WCGT030202-X15-WAK15-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WCGT030202-X15 WAK15 Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Brand: Walter Tools Key figures Relief angle: 7° Corner radius: 0.2 mm Plate form: Trigon 80° Plate size: 03 Plate thickness: 02 Tolerance class: G Design and features Uncoated carbide grade WAK15 Chipbreaker: X15 Series: Walter N‑Sortensystem Execution: T Suitable for aluminium and non‑ferrous metals FAQ Which materials are best machined with this insert? The insert is designed for aluminium and other non‑ferrous metals; the WAK15 grade and X15 chipbreaker promote adhesion‑free cutting in such materials. Is the grade coated and what does that mean for performance? This is an uncoated carbide grade (WAK15); the lack of coating supports a sharper cutting edge and helps prevent material build‑up when machining soft, sticky alloys. How does the trigon form affect drilling and boring operations? The Trigon 80° shape balances cutting forces and provides secure seating in the toolholder, improving stability and repeatability in drilling and boring applications. What are the key geometric values to check before mounting? Check the 7° relief, 0.2 mm corner radius and the Trigon 80° form for correct orientation; these values influence clamping, cutting angles and chip control for optimal performance. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for clarification; there is no affiliation between our company and the named brands. The offered article is original and factory‑new from the manufacturer Walter Tools.
WCGT030202-X15 WK1 T Wendeplatten - Walter Tools
Take advantage of the combination of precise cutting geometry and a proven uncoated carbide grade to achieve stable chip formation and reliable process performance; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific setup. WCGT030202-X15 WK1 drilling/reaming indexable insert – Trigon 80°, 0.2 mm corner radius (Walter Tools) The WCGT030202-X15 WK1 is an uncoated carbide indexable insert intended for drilling and reaming applications, designed to deliver stable chip control and consistent engagement in demanding production tasks. Trigon 80° profile for stable engagement 0.2 mm corner radius for precise edge control 7° clearance angle for reduced rubbing Uncoated carbide WK1 for broad material coverage Consistent metal removal through engineered geometry The Trigon 80° profile and the 0.2 mm corner radius combine to deliver predictable cutting entry and improved edge stability, which reduces chatter and extends usable tool life. The chipbreaker X15 is designed to shape and evacuate chips efficiently during drilling and reaming, supporting a more continuous metal removal process. Together these geometric features provide measurable gains in process repeatability and component surface quality, making the insert particularly suitable where reliable holemaking and tight tolerances are required. Improved process reliability and thermal performance The 7° clearance angle minimises rubbing on the flank face, lowering frictional heat and decreasing the risk of built-up edge during interrupted cuts. The insert is manufactured in the uncoated carbide WK1 grade, an uncoated hardmetal that offers a balance of toughness and wear resistance for general-purpose applications—verify the specific machining matrix for detailed workpiece recommendations. By selecting this insert, workshops can expect steered chip flow and reduced secondary operations, helping to increase throughput and reduce variability in serial production. Practical handling and application guidance As an indexable insert, the component allows for quick indexing or replacement, reducing machine downtime and simplifying tool management. The Trigon form ensures a secure seat and stable clamping in compatible holders, while the X15 chipbreaker supports controlled chips for safer evacuation from deep holes. For users unfamiliar with insert selection: compare the workpiece material and cutting conditions against the product matrix to confirm suitability; where the material mix is varied, the WK1 grade often provides a pragmatic compromise between wear resistance and toughness. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts, request WCGT030202-X15 WK1 availability or ask for application-specific recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: WCGT030202-X15-WK1-WALTER Product type: drilling/reaming indexable insert Brand: Walter Tools Designation: WCGT030202-X15 ISO designation: WCGT030202-X15 WK1 Grade/sort: WK1 Series: Walter Schneidstoffsorte - Serie offen Execution: T Tolerance class: G Dimensions & core data Clearance angle: 7° Corner radius: 0.2 mm Plate form: Trigon 80° Size: 03 Thickness: 02 Tolerance class: G Design & special features Uncoated carbide WK1 Chipbreaker X15 Material: Katalogabhängig Series description: WK1 is an uncoated carbide grade Application note: Verify workpiece suitability in the product matrix FAQ What materials is this insert designed to cut? The WK1 uncoated carbide grade is formulated for a broad range of materials; the WCGT030202-X15 WK1 insert should be matched against the manufacturer's product matrix to confirm compatibility with specific steels, cast irons or non-ferrous alloys. How does the Trigon 80° profile influence holemaking performance? A Trigon 80° profile provides a stable engagement angle that improves axial location and reduces deflection during drilling and reaming, which helps to maintain hole geometry and repeatability under varying feed conditions. What benefit does the X15 chipbreaker provide in practice? The X15 chipbreaker promotes controlled chip formation and efficient evacuation during drilling operations, reducing the risk of chip jamming and improving surface finish by preventing irregular chip buildup on the cutting edge. Is the insert compatible with standard indexable insert holders? The ISO-style designation WCGT030202-X15 WK1 indicates compatibility with holders designed for this geometry; verify seat type and clamping system before mounting to ensure correct fit and secure clamping. How should the cutting edges be inspected and when should the insert be replaced? Inspect for flank wear, edge chipping and plastic deformation; if wear reaches a point that affects hole tolerance or surface integrity, replace the insert to preserve process quality and avoid downstream rework. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com