WCMT030202-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver wear resistance, a Trigon 80° cutting geometry and the RM4 chipbreaker for stable chip formation and consistent performance when machining stainless and heat‑resistant alloys. Order directly via Metav Werkzeuge or consult the team for application advice to ensure optimal process integration. WCMT030202-RM4 WSM20S Trigon 80° indexable insert for turning and drilling applications (Walter Tools) WCMT030202-RM4 WSM20S is a versatile indexable insert designed for demanding turning and drilling tasks in stainless steels and superalloys, combining a resilient grade with a geometry tuned for stability and surface quality. Tiger·tec Silver coating for high wear resistance Geometry Trigon 80° for stable cutting edge 7° clearance angle with 0.2 mm corner radius RM4 chipbreaker for controlled chip formation Reliability when machining tough alloys The WSM20S grade, part of the Tiger·tec Silver family, is formulated for applications in stainless steels and heat‑resistant superalloys. This composition supports stable chip formation and protects the cutting edge under elevated temperatures, which reduces the risk of built‑up edge and frequent interruptions. The result is a more predictable process and fewer re‑works in serial production environments. Geometry and chip control for consistent surfaces With a Trigon 80° profile and the RM4 chipbreaker, the insert provides controlled chip breakage and a robust cutting edge for medium to finishing cuts. The specified 7° clearance angle and the 0.2 mm corner radius contribute to a balance between edge strength and surface finish, helping to maintain dimensional accuracy and homogeneity of the machined surface across batches. Productivity gains through extended tool life The coated WSM20S grade extends tool life and enables higher uninterrupted runtime compared with uncoated options when processing difficult materials. Improved wear resistance and edge stability translate into fewer tool changes and less unplanned downtime, supporting higher overall equipment efficiency and a lower cost per manufactured part over the long run. Practical selection and integration notes The insert is supplied in the standard size and thickness coding suitable for conventional tool holders (size code 03, thickness code 02) and is compatible with turning and boring/drilling tool systems designed for triangular inserts. For reliable results, combine the insert with appropriate coolant strategies and select feeds and depths of cut based on workpiece material and machine rigidity; trial cuts are recommended for new combinations. For production‑critical applications, specify the WCMT030202‑RM4 WSM20S insert from Walter Tools via Metav Werkzeuge for immediate availability and tailored application support — contact Metav Werkzeuge for detailed technical consultation and ordering assistance. Technical Data Article number: WCMT030202-RM4-WSM20S-WALTER Product type: Indexable insert for turning and drilling/boring Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S ISO designation: WCMT030202-RM4 WSM20S Data Clearance angle: 7° Corner radius: 0.2 mm Insert size code: 03 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: RM4 Geometry: Trigon 80° Material application: S / M (superalloys/titanium and stainless steels) Intended use: Turning and drilling/boring indexable insert FAQ Which materials is this insert best suited for? The WCMT030202‑RM4 WSM20S insert is optimised for stainless steels (M) and heat‑resistant superalloys or titanium (S), where thermal stability and edge integrity are critical. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM20S grade enhances wear resistance and helps maintain a stable cutting edge under elevated temperatures, improving tool life and process reliability. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this insert promotes predictable chip formation, reducing chip entanglement and supporting consistent surface finish and dimensional control in continuous operations. Is the Trigon 80° geometry suitable for finishing? Yes, the Trigon 80° profile offers a compromise between edge strength and accessibility, making the insert suitable for medium and finishing passes where surface quality and repeatability matter. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation. The offered item is original, factory‑new merchandise of the manufacturer.
WCMT030202-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP20G grade to achieve stable chip formation and prolonged cutting edge life during steel machining; order the insert through Metav Werkzeuge or contact our consultants for application advice. WCMT030202-RP4 WPP20G — Trigon 80° indexable insert for steel by Walter Tools WCMT030202-RP4 WPP20G is a coated carbide indexable insert designed for high-performance steel machining in turning and drilling/boring applications Tiger‑tec Gold coating for extended tool life Trigon 80° insert with 0.2 mm corner radius Optimised RP4 chipbreaker for steel machining High‑performance carbide grade for reliable steel machining The WPP20G grade, part of the Tiger‑tec Gold series, is a coated carbide formulation tailored for the thermal and chip‑forming challenges of steel (ISO group P). As a result, the insert delivers stable wear behaviour and dependable cutting edge retention under typical turning and boring loads. The specified combination of coating and substrate provides a balanced mix of wear resistance and toughness, enabling consistent component quality and fewer unexpected tool changes in production environments. Geometry that improves cutting stability and surface finish The Trigon 80° shape together with a 0.2 mm corner radius and a 7° clearance angle offers secure seating in holders and a robust cutting edge for mixed steel machining tasks. The small corner radius helps to reduce edge chipping at interrupted cuts while supporting a fine surface finish on workpieces. The RP4 chipbreaker is optimised for the thermal and material flow characteristics of steel, aiding controlled chip segmentation and reducing rework caused by poor chip evacuation. These geometry choices support higher metal removal rates with stable tool life. Operational advantages and integration into production Suitable for turning and for drilling/boring insert applications, this indexable insert is designed to integrate into common toolholder systems used in industrial workshops. The combination of the proven Tiger‑tec Gold coating and the RP4 chip control reduces process variability and helps to lower overall machining costs through fewer tool interruptions. For production planners and operators, the result is improved cycle‑time predictability and repeatable surface quality on steel components, especially in medium to high‑volume turning operations. Contact Metav Werkzeuge for application‑specific recommendations on using Walter Tools Tiger‑tec Gold inserts in steel machining; Metav Werkzeuge can advise on toolholder compatibility and process parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WCMT030202-RP4-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte WCMT030202-RP4 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Indexable insert (turning / drilling/boring) Facts Clearance angle: 7° Corner radius: 0.2 mm Insert form: Trigon 80° Size designation: 03 Thickness code: 02 Tolerance class: M Special features Coating series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Material application: Steel (ISO P) Execution: T FAQ What materials can this insert machine effectively? The WCMT030202-RP4 WPP20G insert is specified for steel (ISO group P); the WPP20G grade and Tiger‑tec Gold coating are formulated to manage typical heat and chip formation when machining unalloyed and alloyed steels. What are the main benefits of the Tiger‑tec Gold WPP20G grade? Tiger‑tec Gold in the WPP20G grade offers improved wear resistance and a stable cutting edge for steel machining, which leads to more consistent tool life and reliable surface quality with the WCMT030202-RP4 insert. Which machining operations is this insert suitable for? The insert is intended for turning as well as for use in drilling and boring insert applications, as reflected in its product designation and geometry optimised for steel cutting. How does the insert geometry influence performance? The Trigon 80° form, 0.2 mm corner radius and 7° clearance angle provide a robust cutting edge, secure clamping and controlled cutting forces; the RP4 chipbreaker further enhances chip control and surface finish during steel machining with the WCMT030202-RP4 WPP20G. Is the RP4 chipbreaker suitable for heavy interrupted cuts? The RP4 chipbreaker has been optimised for steel machining and supports controlled chip segmentation and evacuation; however, tool selection should always consider the specific cutting conditions and component geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT030204-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the Trigon 80° geometry for consistent chip control and reliable tool life; ideal for machining steel. Order the insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. Bohr-/Aufbohrwendeschneidplatte WCMT030204-E47 WPP20G – Trigon 80° insert with Tiger·tec Gold for steel machining by Walter Tools WCMT030204-E47 WPP20G is an indexable insert intended for drilling and bore-enlarging operations in steel, offering a balance of wear resistance and toughness for productive cutting. WCMT030204-E47 WPP20G by Walter Tools Tiger·tec Gold coated carbide for steel machining Trigon 80° geometry with 0.4 mm corner radius 7° relief angle for secure chip control Consistent performance through advanced coating and grade selection The combination of Tiger·tec Gold technology and a coated carbide substrate provides a predictable balance between wear resistance and toughness. The cutting grade WPP20G is optimised for ISO group P (steel), which means the insert copes with the heat and chip formation typical of unalloyed and alloyed steels. This results in fewer unexpected tool changes and a more stable process, supporting continuity on production lines and reducing downtime. Geometry that secures chip control and dimensional stability The Trigon 80° shape together with the chipbreaker E47 is designed to channel chips away reliably during drilling and bore-enlarging. The 0.4 mm corner radius and 7° clearance angle give a secure cutting edge that resists chipping while maintaining acceptable surface finish in bore walls. These geometric choices minimise chatter and help to preserve hole tolerances, making the insert suitable for repetitive, precision-orientated operations. Designed for productivity and predictable tool life The coated grade and robust geometry deliver process security and a stable cutting edge under a variety of cutting conditions. The insert’s characteristics support higher component throughput by reducing the frequency of index changes and by delivering repeatable performance across batches. For production environments, this translates into more predictable cycle times and easier planning of re-grinding or replacement intervals. Practical guidance for application and machining strategy Optimised for steel, the insert performs well in the typical ranges of roughing and semi-finishing when correct feeds and speeds are applied; the WPP20G balance suits a broad set of steel grades. For successful utilisation, select cutting parameters that match the workpiece grade and machining operation, and consider coolant application and holder rigidity to make the most of the insert’s wear characteristics. Where surface finish and hole accuracy are critical, the Trigon geometry and modest corner radius support consistent results. Contact Metav Werkzeuge for tailored cutting-data recommendations or to procure WCMT030204-E47 WPP20G inserts; our consultants provide application advice and rapid order processing via email or phone: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: WCMT030204-E47-WPP20G-WALTER ISO designation: WCMT030204-E47 WPP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Insert form: Trigon 80° Plate size: 03 Plate thickness: 02 Corner radius: 0.4 mm Relief angle: 7° Chipbreaker: E47 Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WPP20G Substrate: coated carbide Application: ISO group P (steel) Execution: T FAQ What materials is this insert suitable for? The WCMT030204-E47 WPP20G insert is intended primarily for steel (ISO group P); the Tiger·tec Gold grade balances wear resistance and toughness for common unalloyed and alloyed steels. How does the Trigon 80° geometry affect hole quality? The Trigon 80° form and 0.4 mm corner radius provide a stable cutting edge that supports dimensional accuracy and consistent bore wall finish during drilling and bore-enlarging operations. What is the role of the chipbreaker E47? The chipbreaker E47 is designed to control chip evacuation and reduce entanglement, improving process reliability when machining steel with this insert. Can this insert be used for finishing operations? The coated carbide grade WPP20G is versatile; while optimised for general machining of steel, final surface finish will depend on machining parameters, holder rigidity and machine stability. What benefits does the Tiger·tec Gold coating deliver in production? The Tiger·tec Gold coating enhances wear resistance and edge life, which leads to fewer index changes and greater overall process security in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the brands cited. The offered article is an original, factory-new product of the manufacturer Walter Tools.
WCMT030204-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the robust WPP20S grade for productive drilling and boring in Stahl; the Trigon 80° geometry with a 0.4 mm corner radius and 7° relief ensures stable chip control and long tool life. Order directly via Metav Werkzeuge or speak with our consultants for application-specific advice. WCMT030204-E47 WPP20S — Indexable drill/boring insert, Trigon 80°, Tiger·tec Silver (Walter Tools) WCMT030204-E47 WPP20S is an indexable cutting insert designed for drilling and boring operations in industrial machining, optimised for Stahl components. Tiger·tec Silver coated carbide Optimised for Stahl machining Trigon 80° insert geometry 7° clearance angle, 0.4 mm corner radius Superior wear resistance for continuous production The Tiger·tec Silver coating combined with the WPP20S grade provides a resilient cutting edge that reduces flank wear and extends usable life. For machining of Stahl (ISO group P), the coated carbide substrate is engineered to withstand the heat and abrasion typical of interrupted cuts in drilling and boring. This results in fewer index changes, lower tooling costs per hole and a more predictable production rhythm. The technical pairing of coating and substrate enables consistent performance across a broad range of alloyed and unalloyed Stahl grades. Geometry that stabilises cutting and improves surface quality A Trigon 80° insert form with a 0.4 mm corner radius and 7° clearance has been chosen to balance edge strength and chip formation. The trigon geometry increases contact area for secure seating in the tool holder and promotes predictable chip flow, while the modest corner radius supports good hole-surface finish without compromising edge life. For operators and process engineers this geometry translates into fewer rejects and less rework, particularly in through-hole and step-boring applications where axial and radial forces vary. Practical benefits for workshop efficiency and process reliability The insert’s construction—registered as WCMT030204-E47 WPP20S—is tailored for productive chip removal in drilling/boring cycles. The combination of a coated hardmetal grade and the specified geometry reduces cycle interruptions and improves reproducibility. Where short tool-change windows and high part counts matter, this insert contributes to reduced downtime and a lower cost per part. Specifying this insert in stable clamping systems supports a robust cutting process, leading to higher output and a steadier lead time for critical components. Integration, selection and expert support for machining setups Selection of the right insert grade and geometry is decisive for process success. The WPP20S grade is a universal, wear-resistant option within the Tiger·tec Silver family, particularly suited to common Stahl machining tasks. For adaptation into an existing toolholder or for optimising feed and speed, Metav Werkzeuge offers consultancy to align cutting data with part material and machine capability. Combining sound technical data with practical advice helps maintain tool life and achieve the required hole tolerances with predictable results. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools WCMT030204-E47 WPP20S and to discuss optimal cutting parameters for the intended Stahl application Technical data Article number: WCMT030204-E47-WPP20S-WALTER Designation: WCMT030204-E47 ISO designation: WCMT030204-E47 WPP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WPP20S Facts Corner radius: 0.4 mm Clearance angle: 7° Insert form: Trigon 80° Plate size: 03 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Material application: Stahl (ISO P) Chipbreaker: E47 Execution: T SKU: WCMT030204-E47-WPP20S-WALTER FAQ What materials is this insert intended for? The WCMT030204-E47 WPP20S insert is optimised for the machining of Stahl (ISO group P) and is designed to handle the heat and chip characteristics typical of these materials. Which features of the insert improve hole quality? The Trigon 80° geometry combined with a 0.4 mm corner radius and a 7° clearance angle provides stable cutting and controlled chip flow, which supports consistent surface finish in drilling and boring operations. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WPP20S grade enhances wear resistance and reduces adhesion at the cutting edge, resulting in longer indexed life and more predictable performance during production runs. Is this insert suitable for high-speed drilling cycles? The coated carbide construction is engineered for productive machining cycles; process parameters should be matched to machine capability and workpiece Stahl grade to achieve optimal results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. 📧 eMail: info@metav-werkzeuge.com ☎️ Telephone: +49 2822 7131930
WCMT030204-E47 WSM20S T Wendeplatten - Walter Tools
Benefit from a high-performance cutting grade and stable chip control that deliver reliable machining of rostfreier Stahl and heat‑resistant superalloys; the combination of Tiger‑tec Silver technology and a Trigon 80° geometry ensures consistent tool life and process security. Order the insert directly via Metav Werkzeuge or consult the Metav advisers for application-specific selection. WCMT030204-E47 WSM20S — Drilling/boring indexable insert, Tiger‑tec Silver, Trigon 80° (Walter Tools) WCMT030204-E47 WSM20S is a Trigon 80° indexable insert designed for demanding drilling and bore‑enlarging operations in difficult‑to‑machine materials Tiger‑tec Silver coating for high wear resistance Optimised chipformer E47 for stable chip control Trigon 80° shape for deep drilling and bore enlarging Suitable for rostfreier Stahl and high‑temperature alloys Longer tool life through coated carbide technology The combination of the WSM20S grade and Tiger‑tec Silver coating focuses on thermal stability and abrasion resistance, which directly reduces flank and crater wear during interrupted drilling. The coated cemented carbide substrate supports consistent edge integrity, particularly when machining rostfreier Stahl or heat‑resistant alloys that tend to work‑harden and generate high temperatures. In practice, this means fewer tool changes and a steadier process window, which translates into improved uptime and predictable tool consumption for production environments. Improved process reliability with geometry and chip control A Trigon 80° plate form with a 0.4 mm corner radius and a 7° relief angle provides a balanced mix of strength and cutting engagement for bore enlargement. The E47 chipformer promotes controlled chip breaking even under tougher feeds and variable depths of cut, lowering the risk of build‑up or unstable chips that can compromise surface finish. For machining centres and drilling heads, this geometry contributes to repeatable hole quality and reduced rework, supporting tighter tolerances and better first‑pass yield. Clear selection and machining guidance for workshop use The ISO designation decodes as a compact indication of dimensions and function: the WCMT format denotes a Trigon insert in the 03 size with a plate thickness of 02. The WSM20S grade is tailored for demanding materials and is classified for use on S / M groups — heat‑resistant superalloys / titanium and rostfreier Stahl. When integrating these inserts into toolholders, attention to recommended feeds, speeds and cooling strategy will maximise performance; the coated grade permits elevated cutting parameters in many cases, but actual settings should follow machine and holder capability. For customers less familiar with insert geometry, the technical team at Metav Werkzeuge can provide mounting and process recommendations. Contact Metav Werkzeuge for tailored selection assistance and to secure the WCMT030204-E47 WSM20S insert for reliable rostfreier Stahl and superalloy machining. Technical data SKU: WCMT030204-E47-WSM20S-WALTER Article designation: WCMT030204-E47 WSM20S Manufacturer: Walter Tools Facts Relief (free) angle: 7° Corner radius: 0.4 mm Plate form: Trigon 80° Plate size: 03 Plate thickness: 02 Tolerance class: M Versions / Special features Coating: Tiger‑tec Silver Grade: WSM20S Chipformer: E47 Series: Tiger‑tec Silver Material applicability: S / M (heat‑resistant superalloys, Titanium; rostfreier Stahl) Application focus: Drilling and bore enlarging operations; difficult‑to‑machine materials FAQ What materials is the WCMT030204-E47 WSM20S insert suitable for? The WCMT030204‑E47 WSM20S insert from Walter Tools is specified for group S and M materials, meaning heat‑resistant superalloys/titanium and rostfreier Stahl; the grade supports secure chip formation and edge stability in these applications. How does the Trigon 80° geometry affect hole quality? The Trigon 80° form concentrates cutting forces for deep drilling and bore enlarging while the 0.4 mm corner radius enhances edge strength, contributing to repeatable hole geometries and improved surface integrity when the insert is used in suitable holders. What does the E47 chipformer provide in practice? The E47 chipformer is designed for controlled chip breaking under varying feeds and interrupted cuts; in production this reduces chip‑related interruptions and helps maintain consistent tool life and surface finish. Can the Tiger‑tec Silver coating be used at higher cutting speeds? The Tiger‑tec Silver coating promotes thermal resistance and wear protection, enabling elevated cutting parameters on many machines; however, machining parameters should be adapted to machine rigidity and holder limitations. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT040202-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, FM4 chipbreaker and Trigon 80° geometry for secure machining of stainless steels and superalloys. Order the WCMT040202-FM4 WSM20S insert directly via Metav Werkzeuge or consult our specialists if required. WCMT040202-FM4 WSM20S Trigon 80° indexable insert — Tiger‑tec Silver by Walter Tools A high-performance WCMT040202-FM4 WSM20S trigon indexable insert engineered for reliable cutting in stainless steels and heat-resistant superalloys. Tiger‑tec Silver coated carbide grade WSM20S Trigon 80° insert for stable engagement 0.2 mm corner radius for precise profile Optimised FM4 chipbreaker for stainless steel Proven performance for demanding materials The Tiger‑tec Silver WSM20S grade combines a hard, wear‑resistant coating with a robust carbide substrate to handle the specific challenges of stainless steels and heat‑resistant superalloys. These materials generate high temperatures at the cutting edge and are prone to workhardening; the chosen grade promotes stable chip formation and reduces the incidence of built‑up edge. The Trigon 80° format provides a positive cutting geometry with broad engagement, improving process stability in interrupted cuts and plunge operations while maintaining a compact insert footprint. Consistent edge life and optimised chip control A carefully matched combination of FM4 chipbreaker and a 0.2 mm corner radius yields reproducible surface quality and reliable edge integrity over longer tool life. The 7° clearance angle reduces rubbing and facilitates shear‑dominant cutting, which in turn lowers cutting forces and thermal load on the cutting edge. For production environments this means fewer insert changes, reduced scrap risk and improved cycle‑time predictability — clear gains in throughput and machining economy. Geometry and grade that simplify process planning The Trigon 80° insert form supports both roughing and finishing passes depending on depth of cut and feed, enabling flexible process windows with the same insert family. The WCMT040202-FM4 format and 02 thickness provide a compact, rigid package that suits small to medium diameter tools and holders commonly used in precision components. Selection becomes straightforward when balancing surface finish requirements and productivity targets: choosing this insert streamlines tooling lists and supports repeatable setups across batches. Suitable applications and typical user scenarios Designed for job shops and production facilities working in sectors such as medical, aerospace and energy, the insert is particularly effective where a combination of heat resistance and edge stability is required. Typical use cases include finishing and semi‑finishing of shafts and housings in stainless steels, as well as interrupted or continuous operations in nickel‑base superalloys. The robust coated carbide grade helps maintain dimensional accuracy over longer runs, supporting leaner inventories and fewer tool interventions. For tailored machining recommendations on Walter Tools’ Tiger‑tec Silver grade and to discuss the WCMT040202-FM4 WSM20S insert for specific applications, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert advice and rapid delivery options Technical Data Article number: WCMT040202-FM4-WSM20S-WALTER SKU: WCMT040202-FM4 WSM20S Brand: Walter Tools Series: Tiger‑tec Silver Facts Clearance angle: 7° Corner radius: 0.2 mm Insert form: Trigon 80° Insert size: 04 Thickness: 02 Grade/sort: WSM20S Chipbreaker: FM4 Execution: T Tolerance class: M Special features Coating technology: Tiger‑tec Silver Substrate: Coated carbide Suitable for: stainless steels (M) Suitable for: heat‑resistant superalloys and titanium (S) Application focus: stable chip formation and edge integrity Typical use: turning, plunge and interrupted cuts FAQ What materials is this insert best suited for? The WCMT040202-FM4 WSM20S insert is optimised for stainless steels (M) and heat‑resistant superalloys or titanium (S), using the Tiger‑tec Silver grade to support stable cutting in adhesive and high‑temperature conditions. How does the FM4 chipbreaker affect surface finish? The FM4 chipbreaker promotes controlled chip formation and evacuation, which helps maintain a consistent surface finish while reducing the risk of chip re‑cutting when machining stainless steels and similar alloys. Can the Trigon 80° geometry be used for both roughing and finishing? Yes. The Trigon 80° form, combined with the 0.2 mm corner radius and the WSM20S grade, provides a balance that allows both semi‑finishing and finishing passes depending on cutting parameters and toolholder rigidity. What distinguishes Tiger‑tec Silver WSM20S from standard carbide grades? Tiger‑tec Silver WSM20S uses a tailored coating process to improve heat resistance and wear performance in challenging materials, delivering longer edge life and fewer insert changes compared with conventional uncoated or basic coated grades. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Markennamen and protected product names are mentioned only for clarification and there is no affiliation between our company and the referenced brands. The offered article is an original, factory‑new product from the manufacturer.
WCMT040202-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
The Tiger‑tec Silver coating combined with the WSM30S carbide grade delivers stable cutting edges and reliable chip control for machining stainless steels and heat‑resistant alloys; this results in consistent component quality and predictable tool life. Order WCMT040202-FM4 WSM30S directly via Metav Werkzeuge or consult their specialists for tailored application support. WCMT040202-FM4 WSM30S — Trigon 80° indexable insert for drilling and turning, Walter Tools A WCMT040202-FM4 WSM30S indexable insert engineered for demanding drilling, bore‑enlarging and turning operations on stainless steels and high‑temperature alloys. WCMT040202-FM4 WSM30S by Walter Tools Tiger‑tec Silver coating for heat resistance Trigon 80° form, 7° clearance, 0.2 mm radius For stainless steels and heat‑resistant alloys Optimised grade and coating for tough materials The combination of Tiger‑tec Silver and the WSM30S grade provides a coated carbide solution engineered specifically for difficult‑to‑cut materials. The coating enhances thermal stability and reduces built‑up edge, while the substrate maintains the toughness required under interrupted cuts. For workshops processing stainless steels (ISO group M) or superalloys and titanium (ISO group S), this insert improves process stability and reduces downtime by supporting repeatable cutting performance and controlled wear patterns. Geometry that improves stability and surface finish Designed with a Trigon 80° profile, a 0.2 mm corner radius and a relief angle of 7°, the insert geometry balances edge strength and accessibility in axial and radial engagement. The FM4 chipbreaker supports predictable chip formation and evacuation under the high heat loads typical of these materials. Together, these features reduce vibration and enhance surface integrity, so the tooling contributes directly to consistent component tolerances and less rework in production. Practical benefits for production and tooling strategy Using this indexable solution shortens set‑up variation and supports higher process reproducibility. The coated carbide grade reduces the frequency of insert changes, which lowers handling time and tooling inventory pressure. In mixed‑material production environments where stainless steels and heat‑resistant alloys are machined, the insert’s balance of wear resistance and edge stability enables longer cutting windows and fewer emergency tool changes, improving overall throughput and reducing scrap rates. For application advice on the Walter Tools Tiger‑tec Silver grade and to secure WCMT040202-FM4 WSM30S, contact Metav Werkzeuge for expert guidance and rapid supply Technical data Article number: WCMT040202-FM4-WSM30S-WALTER Designation: WCMT040202-FM4 WSM30S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Corner radius: 0.2 mm Relief angle: 7° Insert form: Trigon 80° Plate size: 04 Plate thickness: 02 Tolerance class: M Chipbreaker: FM4 Special features Coating: Tiger-tec Silver Carbide grade: WSM30S Material suitability: S (superalloys, titanium) Material suitability: M (stainless steels) Application: drilling/bore‑enlarging and turning Execution: T FAQ What materials is this insert suitable for? The WCMT040202-FM4 WSM30S insert is suitable for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), thanks to the WSM30S grade and Tiger‑tec Silver coating. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this turning/drilling insert promotes predictable chip formation and evacuation, improving surface finish and reducing the risk of built‑up edge when machining challenging alloys. Can the Trigon 80° form be used for both turning and drilling operations? Yes, the Trigon 80° profile offers a versatile geometry that supports both turning and bore‑enlarging operations where access and edge strength are required. What does the 0.2 mm corner radius mean for component quality? A 0.2 mm corner radius increases edge robustness compared with a sharper tip, reducing notch wear and improving dimensional stability on finished components. Is this insert a coated carbide type? Yes, the WCMT040202-FM4 WSM30S is a coated carbide insert from the Tiger‑tec Silver series, designed to balance hardness and toughness for long tool life. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer (Walter Tools).
WCMT040202-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the FP4 chipbreaker and the precise 0.2 mm corner radius for consistent steel machining and extended tool life; order the insert via Metav Werkzeuge or consult our specialists for process optimisation. WCMT040202-FP4 WPP10G – Trigon 80° turning indexable insert, Tiger·tec Gold (Walter Tools) The WCMT040202-FP4 WPP10G is an 80° trigon indexable insert designed for demanding steel turning and boring tasks, offering a balanced mix of wear resistance and toughness for productive metal removal. Tiger·tec Gold coated carbide grade WPP10G Trigon 80° geometry for stable engagement FP4 chipbreaker for controlled chip formation 0.2 mm corner radius for repeatable surface finish Consistent productivity for steel machining The combination of Tiger·tec Gold coating and the WPP10G grade provides a robust solution for machining steel, optimised for the heat and chip formation typical of these materials. The multi-layered coating reduces wear while the substrate maintains toughness, so the insert sustains performance across a range of cutting conditions. This results in improved tool life and fewer interventions during production, which supports higher machine uptime and predictable output. Geometry that stabilises cutting and improves finish The Trigon 80° form and FP4 chipbreaker are matched to promote stable cutting forces and efficient chip control. The insert’s geometry reduces vibration at entry, while the FP4 breaker shapes chips for safe evacuation in turning and boring cycles. A 0.2 mm corner radius ensures a reliable contact edge for consistent surface quality without compromising edge strength, making this insert suitable for finishing and light to medium turning operations where repeatable results matter. Coating and grade explained for process reliability The Tiger·tec Gold series is a coated carbide technology developed to balance wear resistance with sufficient toughness; in practice, the Tiger·tec Gold layer delays abrasive wear and preserves edge geometry under elevated temperatures. The WPP10G classification denotes a Walter Tools grade intended for general steel applications, combining long life and versatility. Understanding these terms helps to choose cutting parameters that exploit the insert’s strengths, particularly in serial production or mixed-batch machining where reliability is essential. Practical selection and integration in the toolroom Selecting the WCMT040202-FP4 variant supports straightforward integration into standard trigon toolholders intended for 80° inserts. The insert thickness and size codes correspond to established mounting systems, while the FP4 chipbreaker simplifies process setup by reducing the need for special tooling adjustments. For unusual applications or when optimising cycle times, pairing this insert with stable clamping and appropriate coolant or dry strategies will enhance chip control and surface integrity. For a reliable, Tiger·tec Gold-based solution from Walter Tools, contact Metav Werkzeuge for specification advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WCMT040202-FP4-WPP10G-WALTER Designation: WCMT040202-FP4 WPP10G Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Facts Size code: 04 Thickness code: 02 Corner radius: 0.2 mm Free cutting angle: 7° Insert form angle: 80° Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FP4 Geometry: Trigon 80° Suitable for: Steel (P) Tolerance class: M FAQ What materials is this insert intended for? The WCMT040202-FP4 WPP10G is specified for steel applications (ISO group P); the Tiger·tec Gold coating and the WPP10G grade are optimised for the thermal and chip-forming behaviour of steel. Can this insert be used for finishing passes? Yes; the Trigon 80° geometry with a 0.2 mm corner radius delivers a balance between edge strength and surface quality suitable for finishing and light-medium turning operations with the Walter Tools insert. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving process stability when turning or boring with this insert. Is the WCMT040202-FP4 WPP10G compatible with standard trigon toolholders? The insert follows common trigon dimensions and mounting codes, making it compatible with standard 80° trigon toolholders designed for the corresponding size and thickness. What are the main benefits of the Tiger·tec Gold coating on this insert? Tiger·tec Gold provides increased wear resistance and maintains edge integrity at elevated temperatures, which supports longer tool life and more consistent performance in serial production environments. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners; brand names are mentioned for explanation only and do not imply any affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
WCMT040202-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of wear-resistant Tiger·tec Gold coating and a precision FP4 chipbreaker for stable chip control and reliable machining of steel. The insert delivers consistent edge life and predictable performance for turning and boring operations; order WCMT040202-FP4 WPP20G via Metav Werkzeuge or consult the technical team for application matching. WCMT040202-FP4 WPP20G – Turning/boring indexable insert, Tiger·tec Gold, for steel (Walter Tools) A WCMT040202-FP4 WPP20G indexable insert engineered for robust turning and boring of ISO P materials, combining a coated carbide grade and a purpose-designed chipbreaker to enhance process stability. Tiger·tec Gold coating for extended edge life FP4 chipbreaker for controlled chip formation Trigon 80° plate form for secure clamping 0.2 mm corner radius for precise contouring Reliable machining performance for steel production The coated-carbide grade WPP20G is optimised for the thermal and mechanical conditions encountered when machining steel. Designed within the Tiger·tec Gold family, this insert provides a balance between wear resistance and toughness, which translates into longer tool life and fewer interruptions on the shop floor. The result is a measurable improvement in process reliability, especially for batch and continuous turning tasks where repeatable results are essential. Predictable chip control and efficient material removal The FP4 chipbreaker and the Tiger·tec Gold coating work together to stabilise chip formation and reduce built-up edge. This combination enables consistent chip evacuation and lowers the risk of workpiece damage or machine downtime. For production environments, the controlled chip behaviour means higher average feed rates can be sustained safely, improving cycle times without compromising surface quality. The coated surface also helps resist edge wear, contributing to long tool life and reduced tooling costs per part. Precision geometry that supports accuracy and clamping The insert’s Trigon 80° plate form and a 7° clearance angle provide secure seating in standard toolholders while enabling reliable cutting engagement. A 0.2 mm corner radius ensures defined contouring for dimensional stability and fine surface finishing where required. Designations such as plate size 04 and thickness 02 follow industry norms, simplifying tool selection and inventory management. Tolerance class M underlines consistent manufacturing accuracy, which supports repeatable component tolerances in series production. Consult Metav Werkzeuge for application-specific recommendations on Walter Tools WCMT040202-FP4 WPP20G inserts and to check current availability Technical Data Article number: WCMT040202-FP4-WPP20G-WALTER Designation: WCMT040202-FP4 WPP20G Product type: Turning/boring indexable insert Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.2 mm Plate size: 04 Thickness designation: 02 Plate form: Trigon 80° Tolerance class: M Materials & features Grade: WPP20G (coated carbide, Tiger·tec Gold) Chipbreaker: FP4 Series: Tiger·tec Gold Suitable for: Steel (ISO group P) Application: Turning and boring FAQ What materials is this insert suitable for? The WCMT040202-FP4 WPP20G turning insert from Walter Tools is specified for steel (ISO group P) and is designed to handle the typical heat and chip conditions of unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WPP20G grade improves wear resistance and edge stability, which prolongs tool life and helps maintain consistent cutting performance during longer production runs. For which operations is this insert intended? This insert is intended for turning and boring tasks; the combination of Trigon 80° geometry and FP4 chipbreaker makes it suitable for general turning operations and light boring where controlled chip removal is required. Which geometric features enhance machining accuracy? Features such as the 0.2 mm corner radius, 7° clearance angle and the Trigon 80° form contribute to stable clamping, defined cutting engagement and improved surface finish during precision turning. How should this insert be selected for a production process? Selection should match the ISO material group (P for steel), the required surface quality and the toolholder system; the WCMT040202-FP4 WPP20G is a universal WPP20G grade suitable for a wide range of steel turning tasks and is recommended where a balance of wear resistance and toughness is needed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
WCMT040202-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of heat-resistant Tiger·tec Silver coating, a stable RM4 chipbreaker and a robust trigon geometry for reliable performance in stainless steels and superalloys; order the insert through Metav Werkzeuge or consult their specialists for application advice. WCMT040202-RM4 WSM30S turning/boring insert — Tiger·tec Silver, RM4 chipbreaker (Walter Tools) WCMT040202-RM4 WSM30S is a trigon 80° indexable insert designed for demanding turning and boring operations in heat-resistant and stainless materials Tiger·tec Silver for heat-resistant machining Optimised RM4 chipbreaker for stable chips Trigon 80° form for a robust cutting edge For stainless steels and superalloys High-temperature cutting performance that extends tool life The WCMT040202-RM4 WSM30S insert combines a WSM30S coated-carbide grade with Tiger·tec Silver technology to deliver consistent wear resistance under elevated temperatures. The coated-carbide substrate and multi-layer coating are engineered to reduce adhesion and thermal impact when machining stainless steels and superalloys, which typically generate heat and promote workpiece build-up. This results in a measurable improvement in cutting-edge life and process stability, enabling longer uninterrupted cycles and fewer tool changes, which benefits productivity and cost efficiency in production environments. Predictable chip control and cutting stability for safer machining A defined RM4 chipbreaker together with the Trigon 80° geometry creates controlled chip formation and evacuation during roughing and finishing passes. The combination of a 0.2 mm corner radius and a 7° relief angle provides a balance between edge strength and shear efficiency: the small radius supports a robust cutting edge for interrupted cuts, while the relief angle reduces rubbing and heat build-up. Improved chip control minimises the risk of built-up edge and reduces rework, making component quality more consistent and machine downtimes less frequent. Application guidance and compatibility for process planning This insert is intended for machining applications in material groups S (superalloys, titanium) and M (stainless steels), where thermal resistance and edge stability are essential. The coated carbide grade performs well in heavy-duty turning and boring where material adhesion and heat generation challenge conventional grades. For integration into existing tool holders, the trigon form and size designation ensure straightforward replacement and predictable cutting data. For process set-up, select speeds and feeds that favour stable cutting temperatures and exploit the coating’s thermal advantages to extend tool life. Contact Metav Werkzeuge for tailored cutting data and to source Walter Tools Tiger·tec Silver inserts for high-temperature turning and boring applications. Technical Data Article number: WCMT040202-RM4-WSM30S-WALTER Designation: WCMT040202-RM4 WSM30S Manufacturer: Walter Tools Facts Corner radius: 0.2 mm Relief angle: 7° Insert form: Trigon 80° Insert size: 04 Chipbreaker: RM4 Thickness: 02 Tolerance class: M Special features Grade: WSM30S (Tiger·tec Silver coated carbide) Material groups: S (superalloys, titanium), M (stainless steels) Application: heavy-duty and heat-resistant materials Series: Tiger·tec Silver FAQ Which materials is this insert suitable for? The WCMT040202-RM4 WSM30S insert is designed for stainless steels and heat-resistant superalloys (material groups M and S) and is optimised for applications that demand thermal and edge stability. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM30S grade improves thermal resistance and reduces adhesion, helping to maintain a sharp cutting edge and extend tool life during high-temperature turning and boring operations. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes consistent chip segmentation and evacuation, improving surface finish and reducing the likelihood of built-up edge when machining difficult materials. Is the insert compatible with standard trigon tool holders? Yes, the Trigon 80° form and the WCMT040202-RM4 designation match common trigon tool holders; verify holder compatibility and cutting parameters before full production runs. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the listed manufacturers. The offered article is original and factory-new.
WCMT040204-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise geometry and broad steel suitability for consistent drilling and boring performance; order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. WCMT040204-E47 WPP20G Drilling/Boring Indexable Insert, Tiger·tec Gold – for steel WCMT040204-E47 WPP20G is a drilling and boring indexable insert engineered for robust performance in steel machining applications. Tiger·tec Gold coated carbide grade WPP20G Designed for machining steel (ISO P) 80° trigon geometry for stable cutting 0.4 mm corner radius with E47 chipbreaker High-performance grade for reliable metal removal The WCMT040204-E47 WPP20G belongs to the Tiger·tec Gold coating family and is manufactured as a coated carbide insert to withstand the thermal and mechanical demands of steel cutting. The WPP20G grade is formulated to deliver improved wear resistance and stable chip formation, which translates into fewer interruptions for insert changes and a lower cost per component. For production environments where repeatability matters, the coated carbide technology supports consistent machining behaviour across runs, enabling tighter process control and predictable life cycles. Geometry that stabilises cutting and improves surface quality The insert’s 80° trigon outline and 7° clearance combine to provide a stable cutting interface that resists deflection during drilling and boring operations. The 0.4 mm corner radius increases edge strength while the E47 chipbreaker is shaped to control chip flow from typical steels, helping to avoid clogging and protecting the cutting edge. These geometric choices result in a more consistent surface finish and reduced risk of edge chipping, making the insert suitable for demanding component tolerances where surface integrity is essential. Economical machining with predictable tool life Selecting a WPP20G grade insert for steel (ISO P) supports a balance between toughness and hardness, which is beneficial when machining a wide range of unalloyed and alloyed steels. The combination of the Tiger·tec Gold coating and the insert’s geometry reduces wear rates and helps maintain a repeatable cutting edge, so throughput can be increased without compromising part quality. Process planners will find that predictable insert behaviour assists with cycle-time optimisation and reduces unplanned downtime, contributing to measurable savings over production batches. Choosing and integrating the insert into the process The insert is supplied in the WCMT040204-E47 format with the E47 chipbreaker and is compatible with holders designed for the trigon 80° form. Its specification suits conventional drilling and boring tool bodies that accept indexable inserts of this family; selection of appropriate cutting data and clamping torque will further enhance process security. Walter Tools’ reputation for precision tooling underpins the design intent: consistent results, long tool life and reliable performance in steel-focused applications. For availability, tailored cutting data and expert recommendations from Metav Werkzeuge on the Walter Tools Tiger·tec Gold WPP20G insert, contact Metav Werkzeuge by e‑mail or phone for direct consultation and delivery options. Technical data Article number: WCMT040204-E47-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WCMT040204-E47 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte ISO designation: WCMT040204-E47 WPP20G Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size code: 04 Plate thickness code: 02 Tolerance class: M Special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: E47 Geometry: Trigon 80° Material application: Steel (ISO P) Execution: T Suitable for machining: steel FAQ What types of steel is this insert suited for? The WCMT040204-E47 WPP20G insert with the Tiger·tec Gold grade is designed for a broad range of unalloyed and alloyed steels classified under ISO P. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and supports stable chip formation, which extends edge life and improves process reliability in steel machining. What benefit does the 80° trigon form provide in drilling and boring? The 80° trigon outline offers a stable engagement with the workpiece, reducing deflection and helping to maintain consistent surface finish and dimensional accuracy during drilling and boring. Is the E47 chipbreaker suitable for continuous production? Yes, the E47 chipbreaker is designed to control chip flow in steel applications, supporting continuous production by minimising chip-related interruptions and protecting the cutting edge. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mention of brands and trademarks is for explanation only and does not imply any association between our company and the referenced manufacturers.
WCMT040204-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WPP20S carbide grade and the Trigon 80° geometry for consistent chip control and extended tool life; order or request technical cutting data via Metav Werkzeuge if required. WCMT040204-E47 WPP20S drilling/boring indexable insert — Trigon 80°, 7° clearance, Walter Tools The WCMT040204-E47 WPP20S is a trigon 80° indexable insert engineered for drilling and boring applications, optimised for machining Stahl and tailored to stable chip formation in general-purpose to demanding cutting tasks. Tiger·tec Silver coated carbide grade WPP20S Trigon 80° geometry for stable engagement E47 chipbreaker for controlled chip flow 7° clearance angle for reduced rubbing 0.4 mm corner radius for durable cutting edge Improve cycle times with coating and grade synergy The combination of the Tiger·tec Silver coating and the WPP20S carbide grade delivers a balance between abrasion resistance and toughness that directly improves cycle times. The coating reduces friction at the cutting edge while the substrate maintains edge integrity under intermittent and continuous cutting loads. For machining Stahl, the insert’s geometry and the E47 chipbreaker work together to promote predictable chip formation; this reduces the frequency of interruptions for chip clearing and supports uninterrupted production runs. The result is higher process reliability and fewer tool changes, which has an immediate effect on operational efficiency. Longer tool life and improved surface quality A 0.4 mm corner radius and a 7° clearance angle combine to protect the cutting edge during axial engagement and to minimise flank contact. This geometry translates into consistent dimensional accuracy and an improved surface finish on the workpiece. The coated carbide composition of the grade increases resistance to thermal and abrasive wear, meaning the insert sustains its cutting performance over longer runs. Fewer regrinds and replacements reduce downtime and overall operating costs, supporting a favourable cost-per-part metric in batch or continuous production. Versatile compatibility with common drilling and boring systems The trigon 80° form and the insert size code support compatibility with a wide range of drill bodies and boring heads designed for indexable inserts. The compact form factor with plate size 04 and thickness 02 enables use in constrained spaces where secure seating and stable cutting are required. The E47 chipbreaker is optimised for the thermal and chip conditions typical when working with Stahl, helping to avoid built-up edge and promoting reliable chip evacuation even in deeper holes or interrupted cuts. Practical application advice and integration into production Because the grade is tuned for the ISO P group, these inserts are suitable for a range of unalloyed and alloyed Stahl grades encountered in most shops. When integrating the insert into existing tool systems, match feed and speed to the workpiece condition and machine rigidity; the Tiger·tec Silver coating supports increased cutting speeds where machining conditions allow. If process-specific cutting data or compatibility checks are needed, the technical team at Metav Werkzeuge can assist with tailored recommendations and cutting parameter suggestions to maximise productivity. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools WCMT040204-E47 WPP20S inserts — technical advice and procurement support are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: WCMT040204-E47-WPP20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WCMT040204-E47 WPP20S Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Grade: WPP20S Series: Tiger·tec Silver Numbers / measurable specifications Clearance angle: 7° Corner radius: 0.4 mm Insert form: Trigon 80° Insert size: 04 Plate thickness code: 02 Tolerance class: M Designs / special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: E47 Material application: suitable for Stahl (ISO P group) Series characteristics: balanced wear resistance and toughness for general steel machining FAQ What materials is this insert designed for? The WCMT040204-E47 WPP20S insert is designed primarily for machining Stahl materials and conforms to the ISO P material group performance expectations. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating reduces friction and thermal impact at the cutting edge, extending tool life and allowing for higher stable cutting parameters with the WPP20S grade. What advantage does the Trigon 80° form provide in drilling and boring? The trigon 80° form offers a stable cutting geometry that improves engagement and reduces deflection during drilling and boring, contributing to consistent hole quality. Is the E47 chipbreaker suitable for interrupted cuts? Yes, the E47 chipbreaker is engineered to control chip formation under the heat and chip-flow conditions typical when machining Stahl, and it performs well in interrupted cuts. Can Metav Werkzeuge provide cutting data for this insert? Metav Werkzeuge can supply application-specific cutting parameters and compatibility advice for the WCMT040204-E47 WPP20S insert to support integration into production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT040204-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance, the Trigon 80° geometry and a precise 0.4 mm corner radius to ensure stable chip formation and extended tool life in demanding drilling and boring tasks. Order the WCMT040204-E47 WSM20S insert directly via Metav Werkzeuge or consult the Metav specialists for application support. WCMT040204-E47 WSM20S — Drilling/boring indexable insert, Tiger·tec Silver, for stainless steels & superalloys — Walter Tools WCMT040204-E47 WSM20S is a Trigon 80° indexable insert designed for drilling and boring operations in demanding materials such as stainless steels and heat‑resistant superalloys Tiger·tec Silver coating for high thermal resistance WSM20S grade optimised for stainless steel and superalloys Trigon 80° form with 0.4 mm corner radius 7° clearance angle for secure chip control High-temperature performance for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade provides a robust solution for materials that generate heat and strain the cutting edge. Coated carbide technology increases wear resistance and helps maintain a stable cutting edge when machining stainless steels and superalloys, which are known for poor thermal conductivity and rapid tool loading. This results in fewer interruptions, more predictable tool life and a measurable improvement in process stability for production environments. Precision geometry that stabilises chip flow and surface finish The Trigon 80° insert geometry, together with the E47 chipbreaker and a 0.4 mm corner radius, balances edge strength and chip control. The insert shape reduces vibration during drilling and boring, while the chipbreaker guides swarf away from the cutting zone. As a result, the machining process benefits from improved surface integrity and fewer rework cycles, which supports higher first‑pass yields and steadier cycle times on the shop floor. Practical advantages in toolpath consistency and setup A 7° clearance angle and clear dimensional codes (insert size 04, thickness code 02) ensure compatibility with common toolholder systems used in drilling and boring applications. The tolerance class M underlines consistent manufacturing precision, helping to maintain reproducible cutting conditions across batches. These characteristics contribute to reduced setup times and consistent tool performance, which is particularly valuable in high‑mix or repeat production scenarios. Production reliability and economical operation Designed for the challenges of machining tough materials, this coated carbide insert supports stable chip formation and reliable edge life, contributing to lower downtime and less frequent insert changes. The technical concept behind the insert focuses on process security and predictable productivity—factors that influence total cost of ownership beyond the unit price. The brand reputation of Walter Tools further supports confidence in repeatable results and supply chain reliability. For application confirmation, cutting parameters and availability of Walter Tools WCMT040204-E47 WSM20S inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav specialists provide tailored advice and rapid order handling. Technical data Article number: WCMT040204-E47-WSM20S-WALTER Description: WCMT040204-E47 WSM20S trigon 80° indexable insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 04 Thickness code: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: E47 Form: Trigon 80° Material suitability: S / M (superalloys/titanium and stainless steel) FAQ What materials is this insert suitable for? The WCMT040204-E47 WSM20S insert is intended for stainless steels (M) and heat‑resistant superalloys/titanium (S), taking advantage of the Tiger·tec Silver coating and the WSM20S grade. Can this insert be used for difficult stainless steel machining? Yes. The combination of the WSM20S grade and the Trigon 80° geometry is optimised to support secure chip formation and wear resistance when machining demanding stainless steels. What is the purpose of the E47 chipbreaker? The E47 chipbreaker on this Walter Tools insert controls swarf shape and evacuation during drilling and boring operations, improving surface quality and reducing the risk of built‑up edge. Which corner radius and clearance angle does this insert have? The insert features a 0.4 mm corner radius and a 7° clearance angle, balancing edge strength and cutting clearance for stable performance. Is the WCMT040204-E47 WSM20S compatible with standard holders for Trigon inserts? The insert follows common Trigon 80° form codes (insert size 04, thickness 02) and tolerance class M, enabling fitment in standard toolholders designed for this geometry. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
WCMT040204-FM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM20S grade for secure chip formation and extended tool life; the FM4 chipbreaker plus trigon geometry deliver consistent surface quality and predictable machining of stainless steels and superalloys. Order the insert directly via Metav Werkzeuge or consult our technical team for cutting data and application advice. WCMT040204-FM4 WSM20S drilling/boring and turning insert – Walter Tools, Tiger·tec Silver, FM4 chipbreaker WCMT040204-FM4 WSM20S is an indexable insert designed for drilling/boring and turning applications, optimised for machining stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated carbide for high durability Optimised FM4 chipbreaker for secure chip control Trigon 80° geometry with 0.4 mm corner radius Designed for stainless steels and superalloys Higher process reliability when machining challenging alloys The WSM20S grade within the Tiger·tec Silver family is a coated carbide solution developed for materials that demand thermal and edge stability. For workpieces in stainless steels and heat‑resistant superalloys, the combination of coating chemistry and substrate hardness supports stable chip formation and reduces the risk of built‑up edge. This results in more consistent component quality and fewer unscheduled tool changes, improving throughput on series and batch production. Geometry and chip control that cut downtime The insert’s FM4 chipbreaker and Trigon 80° form translate into reliable chip evacuation and even cutting forces during interrupted cuts. The 0.4 mm corner radius together with a 7° clearance produces a balanced compromise between edge strength and surface finish, lowering the incidence of edge chipping and enabling longer tool life. These geometry choices reduce vibration sensitivity and help maintain dimensional stability across multiple workpieces, supporting predictable machining parameters. Practical benefits for workshop integration and tool management As a standard indexable insert, the part fits established toolholders and is easy to handle in production environments. The design reduces set‑up time and simplifies inventory: wearing an insert can be replaced without re‑tooling the holder, preserving toolholder accuracy. The grade and coating combination also supports higher cutting speeds where advisable, yielding better productivity without sacrificing surface integrity. Application notes and cutting data are available to match the insert to turning, boring or drilling cycles. Contact Metav Werkzeuge for tailored cutting data, availability of WCMT040204-FM4 WSM20S inserts from Walter Tools and application recommendations for stainless steels and superalloys Technical data Article number: WCMT040204-FM4-WSM20S-WALTER Designation: WCMT040204-FM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Clearance angle: 7° Corner radius: 0.4 mm Insert form: Trigon 80° Size code: 04 Thickness code: 02 Tolerance class: M Special features Coating/technology: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM4 Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Application: drilling/boring and turning insert FAQ Is this insert suitable for machining stainless steel? The WCMT040204-FM4 WSM20S insert is specifically designed for stainless steels (ISO group M); the Tiger·tec Silver coating and WSM20S grade promote secure chip formation and thermal stability when machining these materials. How does the FM4 chipbreaker affect performance? The FM4 chipbreaker provides controlled chip segmentation and evacuation, improving surface finish and reducing the likelihood of chip entanglement in turning and boring operations with demanding alloys. What advantages does the trigon 80° form provide? The Trigon 80° geometry combines good edge strength with versatile cutting angles, making the insert suitable for a range of turning and boring tasks where robust corners and reliable cutting orientation are required. Can this insert handle superalloys and titanium? Yes; the WSM20S grade is intended for both ISO group S materials (heat‑resistant superalloys and titanium) and ISO group M, offering wear resistance and edge stability under high thermal loads. Does the insert fit standard toolholders? The WCMT040204-FM4 geometry conforms to common indexable insert standards and is compatible with toolholders designed for Trigon 80° inserts in the corresponding size code. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original factory‑new merchandise of the manufacturer Walter Tools.
WCMT040204-FM4 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of a tough Tiger‑tec Silver grade, a precise Trigon 80° geometry and an efficient FM4 chipbreaker for reliable machining of stainless steels and superalloys. Order directly via Metav Werkzeuge or contact our consultants for tailored application support. WCMT040204-FM4 WSM30S — Trigon 80° indexable insert for stainless steels and superalloys | Walter Tools WCMT040204-FM4 WSM30S is an indexable turning/drilling insert engineered for demanding applications in stainless steels and heat-resistant superalloys, offering a balance of edge stability and chip control Tiger‑tec Silver coated grade WSM30S Trigon 80° insert for robust cutting FM4 chipbreaker for controlled chips Relief angle 7° and corner radius 0.4 mm Robust grade for demanding materials The WSM30S grade, part of the Tiger‑tec Silver series, is a coated carbide designed for severe machining conditions. Its coating system increases heat resistance and supports a stable cutting edge, which reduces edge wear when turning tough-to-machine alloys. This results in longer effective tool life and fewer interruptions for tool changes, supporting continuous production in industrial environments where material behaviour can lead to built-up edge and thermal loading. Geometry that protects the cutting edge and improves accessibility The Trigon 80° form combines strength with access to tight or interrupted cuts. A relief angle of 7° helps to lower radial cutting forces while the corner radius 0.4 mm gives a compromise between edge robustness and surface finish. The FM4 chipbreaker is tuned to produce short, manageable chips on stainless steels and similar materials, improving process security and reducing the risk of chip entanglement at higher feed rates. Productivity through predictable performance Designed for ISO material groups M (stainless steels) and S (superalloys/titanium), this insert promotes consistent results across a wide material spectrum. The combination of grade and geometry provides enhanced thermal stability and chip control, which can translate into reduced cycle times and lower tooling costs per component in serial production. The result is measurable process reliability and improved throughput for workshops that require repeatable quality. Practical application notes and support Suitable for both roughing and semi‑finishing passes depending on the chosen cutting parameters and holder, the insert performs best with coolant or high‑pressure flushing in difficult alloys to support chip evacuation. For help selecting compatible toolholders, feeds and speeds for specific grades of stainless steels or superalloys, Metav Werkzeuge can provide detailed guidance. If additional technical data is required, please request the cutting data sheet or contact our technical team by e‑mail or phone. For process advice, availability and application recommendations for Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the WCMT040204-FM4 WSM30S and its intended use Technical data Article number: WCMT040204-FM4-WSM30S-WALTER Designation: WCMT040204-FM4 WSM30S Manufacturer: Walter Tools Numbers / Core technical data Relief angle: 7° Corner radius: 0.4 mm Insert size: 04 Thickness code: 02 Tolerance class: M Special features / Versions Series: Tiger‑tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Shape: Trigon 80° Execution: T Material groups: S / M (superalloys/titanium and stainless steels) Suitable for stainless steel machining: yes FAQ What materials is this insert intended for? The WCMT040204-FM4 WSM30S insert by Walter Tools is specified for ISO groups M and S, meaning it is intended for stainless steels and heat‑resistant superalloys/titanium, where thermal stability and chip control are critical. Which cutter geometry improves edge life on interrupted cuts? The Trigon 80° shape combined with a corner radius 0.4 mm on the WCMT040204-FM4 helps protect the cutting edge during interrupted and heavy cuts, providing a robust geometry for difficult turning operations. How does the FM4 chipbreaker affect production? The FM4 chipbreaker is engineered to produce short, controlled chips in tough materials, reducing the risk of chip build‑up around the tool and improving process security during longer production runs with the WCMT040204-FM4 WSM30S. Is coolant recommended when machining with this grade? For many stainless steels and superalloys, the Tiger‑tec Silver grade benefits from appropriate coolant or high‑pressure flushing to aid chip evacuation and heat management when using the WCMT040204-FM4 insert. Where to get cutting data for this insert? Cutting data sheets and application recommendations for the WCMT040204-FM4 WSM30S are available from Metav Werkzeuge; the supplier can provide suggested feeds, speeds and holder choices for specific materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
WCMT040204-FP4 WPP10G T Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP10G grade for consistent wear resistance and stable chip formation, ensuring productive turning of steel components; order directly via Metav Werkzeuge or consult with our specialists for optimal grade selection and delivery. WCMT040204-FP4 WPP10G turning insert — Walter Tools, Trigon 80°, FP4 chipbreaker WCMT040204-FP4 WPP10G is a trigon-shaped indexable turning insert designed for robust steel machining and heavy-duty roughing applications Tiger·tec Gold coating for high wear resistance WPP10G grade optimised for steel machining Trigon 80° form for robust roughing 7° clearance with 0.4 mm corner radius Higher throughput from advanced coating and grade selection The combination of the Tiger·tec Gold coating with the WPP10G coated carbide grade delivers a predictable balance between hardness and toughness, producing stable chip formation during continuous turning of steel. Coating technology reduces flank wear and thermal loading, which extends edge life and shortens tool-change intervals. For production environments where cycle time matters, this translates into fewer interruptions and a measurable increase in net productive hours. The statement of performance is supported by the material focus on steel, with the grade adapted to the heat and chip characteristics typical of unalloyed and alloyed steels. Improved process stability through chip control and geometry The FP4 chipbreaker has been engineered to control chip shape under varying cutting conditions, preventing long, entangling chips and improving evacuation. The Trigon 80° form provides a robust cutting edge that tolerates higher depths of cut, while the 7° clearance and 0.4 mm corner radius deliver a stable cutting edge with dependable wear behaviour. These geometric choices reduce the likelihood of edge chipping and help maintain dimensional accuracy during prolonged runs, supporting consistent surface finish and repeatability in serial machining. Seamless workshop integration and predictable performance The trigon insert design and standard ISO designation facilitate integration into existing toolholders and tool systems, permitting quick indexing and low downtime. The tolerance class M supports consistent seat fitting and reduces mechanical play, contributing to reliable indexing and repeatable component tolerances. For planners and process engineers, the insert’s specification supports straightforward tooling lists and predictable regrinding or replacement cycles, aiding inventory planning and cost calculations over production runs. Practical benefits include reduced scrap rates and more constant throughput for batch and continuous manufacturing. For process-critical machining choose Walter Tools Tiger·tec Gold inserts — contact Metav Werkzeuge for application advice, tailored recommendations and prompt supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WCMT040204-FP4-WPP10G-WALTER Designation: WCMT040204-FP4 WPP10G Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Shape: Trigon 80° Chipbreaker: FP4 Facts Size code: 04 Thickness code: 02 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: M Special features Coated carbide Suitable for steel machining Robust edge for roughing ISO-compatible insert designation FAQ What materials is this insert suitable for? The WCMT040204-FP4 WPP10G turning insert from Walter Tools is specified for machining steel (P group) and is optimised for the heat and chip behaviour associated with unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WCMT040204-FP4 WPP10G reduces flank wear and improves thermal resistance, which leads to longer edge life and more consistent machining over extended cycles. What role does the FP4 chipbreaker play in chip control? The FP4 chipbreaker shapes chips into controlled, short fragments, improving evacuation and reducing the risk of entanglement, which supports safer and more efficient turning operations with the trigon insert. Is the insert compatible with standard toolholders? The insert uses a standard ISO-style trigon form and tolerance class M, making it compatible with widely used turning toolholders designed for Trigon 80° inserts. What cutting tasks is the Trigon 80° form best for? The Trigon 80° geometry offers a robust cutting edge ideal for heavy roughing and interrupted cuts where edge strength and stability are required. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT040204-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the FP4 chipbreaker for longer tool life and steady chip control; the robust Trigon 80° geometry with a 0.4 mm corner radius offers durable edge support and repeatable surface quality. Order via Metav Werkzeuge or consult the technical team for application-specific guidance. WCMT040204-FP4 WPP20G – Turning/boring indexable insert, Trigon 80°, Walter Tools The WCMT040204-FP4 WPP20G is a coated carbide indexable insert designed for productive turning of Stahl, combining a wear-resistant grade with an FP4 chipbreaker for stable machining. Tiger·tec Gold coating for extended tool life Designed for Stahl machining with reliable chip control Trigon 80° geometry with 7° clearance angle FP4 chipbreaker for consistent surface finish Increased productivity through advanced coating technology The combination of the Tiger·tec Gold surface engineering and the WPP20G grade delivers a measurable improvement in wear resistance and process stability. Coated carbide reduces flank and crater wear under typical turning conditions, which extends tool life and decreases downtime for insert changes. For production runs on Stahl, the coated substrate moderates heat at the cutting edge and supports consistent performance across varied feed and speed ranges. The result is fewer tool interventions and more predictable cycle times, which benefits throughput in mixed-production environments. Consistent chip control for improved surface quality The FP4 chipbreaker is engineered to produce stable, segmented chips in a wide range of turning operations. Controlled chip formation reduces the risk of entanglement and minimises vibration, leading to a more consistent cutting force and an improved finish on the workpiece. Because chip behaviour affects tool life and machine load, the FP4 geometry contributes directly to process reliability. This makes the insert suitable for demanding finishing and light to medium roughing where repeatable surface integrity is required. Robust geometry for repeatable, secure cutting The Trigon 80° plate form paired with a 0.4 mm corner radius and 7° clearance combines rigidity with a reliable cutting edge. The trigonal shape increases edge strength and offers three usable cutting corners per insert, which enhances economy in production. A 0.4 mm radius balances edge robustness with the ability to achieve fine surface finishes; larger radii add strength but can increase cutting forces, while smaller radii favour finer detail at the cost of reduced durability. The specified geometry therefore supports both stability and versatility on turned components. Clear guidance on material compatibility and application Grade WPP20G is a coated carbide formulated for the ISO P group and tailored to Stahl machining, addressing the heat and chip formation typical of unalloyed and alloyed steels. The insert is intended for general-purpose turning where a balance of tool life and surface quality is required. Because the carbide substrate and coating are designed to control wear mechanisms common in Stahl cutting, users can expect steady performance for a broad range of steels without frequent grade changes. For atypical materials or hardened steels, refer to grade-specific recommendations or consult technical advisors. Practical benefits for workshop integration and process safety The indexable design simplifies tool management: three cutting edges per insert and a standard trigonal form reduce inventory complexity and replacement time. The tolerance class M indicates consistent manufacturing precision, aiding repeatability when inserts are rotated or exchanged. Reliable chip control and the robust coating also contribute to cleaner machine bays and reduced rework rates, which supports a safer and more efficient workplace. Where process stability and reproducible results are priorities, this insert integrates well into toolholders designed for trigonal plates and common turning systems. Contact Metav Werkzeuge for tailored tooling recommendations and availability for the Walter Tools WCMT040204-FP4 WPP20G insert; technical consultation is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: WCMT040204-FP4-WPP20G-WALTER Designation: WCMT040204-FP4 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Trigon 80° Plate size: 04 Plate thickness: 02 Tolerance class: M Chipbreaker: FP4 Special features Coated carbide (beschichtetes Hartmetall) Applicable to: Stahl Sort description: WPP20G – universal wear-resistant grade Execution: T FAQ What materials is this insert suitable for? The WCMT040204-FP4 WPP20G insert is specified for the ISO P group and is suitable for machining Stahl, including common unalloyed and alloyed steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker produces predictable, segmented chips that reduce vibration and support a consistent surface finish when the WCMT040204-FP4 WPP20G insert is used in standard turning operations. What advantages does the Tiger·tec Gold grade offer? Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and temperature tolerance, extending effective tool life during continuous Stahl machining. Which geometry features contribute to durability? The Trigon 80° plate form, the 0.4 mm corner radius and the 7° clearance angle combine to increase edge strength and provide three indexable cutting corners for repeatable performance. Is the insert compatible with standard trigonal toolholders? Yes, the WCMT040204-FP4 WPP20G is designed for holders that accept trigonal 80° plates and standard clamping systems for this insert type. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools (brand of Walter AG) is a global leader in precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names remain the property of their respective owners. Brand names and trademarks are used here solely for explanation. There is no affiliation between our company and the named manufacturers. The offered article is original, brand-new merchandise from the manufacturer.
WCMT040204-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a Trigon 80° geometry and the FP6 chipbreaker for efficient steel turning and extended tool life — order directly via Metav Werkzeuge or request application advice from our consultants. WCMT040204-FP6 WPP20G — Trigon 80° turning insert, FP6 chipbreaker | Walter Tools A WCMT040204-FP6 WPP20G indexable turning insert designed for reliable medium and finishing turning of steel, combining a robust coated carbide grade with a geometry optimised for consistent chip control Tiger·tec Gold coated carbide WPP20G Trigon 80° geometry for versatile turning 7° relief angle for stable cutting FP6 chipbreaker for controlled chip formation Durable coating and grade for longer production runs The insert uses the Tiger·tec Gold technology in the WPP20G grade, a coated carbide composition engineered for the demands of steel machining. That grade offers a balance between wear resistance and toughness — described in the technical details as suitable for steel workpieces under the ISO P classification. The result is reliable tool life and fewer tool changes during serial production, which supports steady machining cadence and reduces unplanned downtime. For shops transitioning between general-purpose and more demanding operations, the grade’s wear behaviour helps maintain surface quality over extended cycles. Geometry and chip control that improve surface finish A Trigon 80° insert form combined with a 0.4 mm corner radius and a 7° relief angle delivers stable cutting conditions and predictable edge engagement. The FP6 chipbreaker is tuned for the thermal and deformation characteristics of steel, promoting consistent chip segmentation and evacuation. These features contribute to a lower tendency for built-up edge and more uniform flank wear, which in turn supports repeatable dimensional accuracy and improved surface finish on turned components. The insert’s shape also provides multiple cutting edges, enabling economical indexing strategies. Process advantages: productivity, repeatability and application scope This insert is configured for steel machining (ISO P) and covers a spectrum from more wear-resistant to universal and tougher steel types, as indicated by the manufacturer’s classification. The compact geometry and optimised chip control enable reliable performance in both automated and manual turning operations. For production environments that prioritise throughput and consistent part quality, the combination of grade, chipbreaker and geometry leads to reduced machining variability and improved overall efficiency. Walter Tools’ machining concept behind this insert emphasises stable cutting-edge behaviour and good surface integrity. For machining steel with Tiger·tec Gold performance, contact Metav Werkzeuge for precise application recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WCMT040204-FP6-WPP20G-WALTER SKU: WCMT040204-FP6-WPP20G Product type: Drehwendeschneidplatte (turning insert) Designation: WCMT040204-FP6 WPP20G Series: Tiger-tec Gold Grade: WPP20G Chipbreaker: FP6 Manufacturer: Walter Tools Core dimensions & measurable values Insert shape: Trigon 80° Corner radius: 0.4 mm Relief angle: 7° Plate size: 04 Plate thickness: 02 Tolerance class: M Materials & special features Coating technology: Tiger·tec Gold (coated carbide) Suitable for: Steel (ISO P) Application focus: medium turning and finishing Series characteristics: wear-resistant and universal performance FAQ Which materials is this insert suitable for? The insert is specified for steel machining under the ISO P group; the WPP20G grade and Tiger·tec Gold coating are tuned for the thermal and chip-formation conditions typical of steel. What do the main designation elements mean? The designation WCMT040204-FP6 WPP20G identifies a Trigon 80° indexable insert in size 04 with the FP6 chipbreaker and the WPP20G coated carbide grade. What are the key geometry values affecting cutting performance? Key values are the 0.4 mm corner radius and the 7° relief angle; together with the Trigon 80° form and FP6 chipbreaker, they determine chip control and edge engagement. Is this insert recommended for finishing or roughing? The combination of grade and geometry suits medium and finishing turning operations on steel, offering a compromise between edge stability and surface quality. How does the FP6 chipbreaker help in practice? The FP6 geometry promotes controlled chip segmentation and evacuation when cutting steel, reducing the likelihood of continuous chips and supporting repeatable surface finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WCMT040204-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the RK4 chipbreaker for consistently productive machining of cast iron; the trigon 80° shape and 0.4 mm corner radius deliver stable edge engagement and predictable tool life. Order directly via Metav Werkzeuge or consult our team for application-specific recommendations. WCMT040204-RK4 WKK20S — Trigon 80° turning insert with Tiger·tec Silver for cast iron, Walter Tools WCMT040204-RK4 WKK20S is a trigon-shaped turning insert optimised for efficient machining of cast iron, combining a Tiger·tec Silver coating with a dedicated RK4 chipbreaker for stable and productive cutting. Tiger·tec Silver coating for wear resistance RK4 chipbreaker for controlled chip formation Trigon 80° geometry for interrupted cuts Optimised for cast iron machining Extended tool life and consistent productivity for cast iron The coated carbide grade WKK20S offers enhanced resistance to abrasive wear, making it a reliable choice for prolonged work on cast iron components. The Tiger·tec Silver technology reduces flank and crater wear under the thermal and abrasive conditions typical of cast iron machining, resulting in fewer insert changes and more uninterrupted production time. This stability translates directly into predictable cycle times and lower overall tooling consumption. Predictable chip control and improved surface stability Equipped with the RK4 chipbreaker, the insert ensures controlled breakage of the typically short and brittle chips produced when turning cast iron. The Trigon 80° geometry and the modest 0.4 mm corner radius combine to provide a stable cutting edge that handles interrupted cuts and variable engagement without excessive vibration. The resulting chip form and edge stability contribute to consistent surface quality and reduced rework. Practical benefits for process engineers and workshop supervisors The nominal 7° relief angle and compact insert size are suited to diverse turning setups where reliable edge life and repeatable results are required. Using this insert grade can help to simplify grade selection across a range of cast iron applications, reducing inventory complexity. Technical teams benefit from the combination of grade performance and chip control, which supports higher material removal rates while maintaining tool life and surface requirements. Application guidance and integration into production The insert is specifically formulated for the ISO group K (cast iron), providing a focused solution for grey and nodular cast iron operations. Its combination of a robust coating and an effective chipbreaker makes it suitable for both continuous and interrupted turning tasks in engine components, brake parts and other cast-iron workpieces. For best results, align cutting parameters with the machine rigidity and part clamping to exploit the insert's wear resistance and chip control. For targeted cast iron performance with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for cutting-data support or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WCMT040204-RK4-WKK20S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Designation: WCMT040204-RK4 WKK20S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert shape: Trigon 80° Size code: 04 Thickness code: 02 Special features Coating: Tiger·tec Silver Grade: WKK20S Chipbreaker: RK4 Tolerance class: M Material suitability: Cast iron (ISO group K) FAQ What materials is this insert suitable for? The WCMT040204-RK4 WKK20S is formulated for machining cast iron (ISO group K), where the WKK20S grade and Tiger·tec Silver coating offer improved wear resistance. How does the RK4 chipbreaker benefit production? The RK4 chipbreaker on this Walter Tools insert promotes controlled chip formation for cast iron, reducing chip-related disruptions and supporting steady machining performance. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius, which balances edge strength and surface finish, helping to maintain a stable cutting edge during interrupted cuts. Can this insert handle interrupted cuts? Yes. The Trigon 80° geometry combined with the robust grade and chipbreaker supports interrupted and variable engagement typical in cast iron components. Which coating improves the insert's performance? The Tiger·tec Silver coating enhances abrasive wear resistance and thermal stability, extending insert life in cast iron applications. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT040204-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, secure chip control and a geometry optimised for stainless and high-temperature alloys to keep machining stable and productive. Order genuine Walter Tools inserts for consistent results via Metav Werkzeuge or consult the team for material-specific advice. WCMT040204-RM4 WSM20S Trigon 80° indexable insert — Tiger·tec Silver, for stainless steel and superalloys | Walter Tools WCMT040204-RM4 WSM20S is a Trigon 80° indexable insert designed for demanding turning and boring operations in stainless steels and heat-resistant superalloys Tiger·tec Silver coated grade WSM20S Trigon 80° insert form 7° clearance angle for secure cutting RM4 chipbreaker for controlled chips Engineered for high-temperature, hard-to-machine materials The insert is based on the WSM20S grade within the Tiger·tec Silver family, a coated carbide technology engineered for thermal stability and wear resistance. This composition supports machining of stainless steel (ISO group M) and superalloys/titanium (ISO group S), materials that generate heat and can cause built-up edge. The coating reduces friction and improves heat management, which extends tool life and reduces unexpected downtime. As a result, the insert delivers predictable tool wear and consistent component quality in production environments where process reliability matters. Geometry that balances strength and precision The Trigon 80° form provides a strong cutting edge while allowing access to a wide range of turning and boring profiles. The 0.4 mm corner radius smooths transitions and supports edge stability, reducing chatter and improving surface finish on long or interrupted cuts. The 7° clearance angle ensures that the cutting edge engages material efficiently without rubbing, helping to maintain dimensional accuracy. The RM4 chipbreaker is optimised for medium-to-heavy feeds and supports stable chip formation, which simplifies chip handling and protects both the workpiece and the toolholder. Practical benefits in daily machining Using a coated grade like WSM20S means fewer insert changes and more predictable shift planning: the combination of coating, substrate and chipbreaker reduces the frequency of interventions. For production teams, this translates into higher machine uptime and a lower cost per part. The insert's form and coating also help to achieve consistent surface quality, which is particularly helpful when subsequent processes such as heat treatment or assembly demand tight tolerances and good finish. Simple selection and integration into existing processes The insert is supplied in the common ISO designation format and fits standard toolholders designed for Trigon 80° geometry, easing inventory management. Operators familiar with indexable turning inserts will recognise the handling and clamping procedures; the coated carbide substrate and specific RM4 chip control mean cutting data can often be increased compared with uncoated grades when cooling and fixturing are adequate. For applications with severe work-hardening or interrupted cuts, pairing this insert with appropriate cutting parameters yields the best balance of life and part quality. Contact Metav Werkzeuge for material-specific recommendations and to obtain original Walter Tools Tiger·tec Silver inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: WCMT040204-RM4-WSM20S-WALTER Article designation: WCMT040204-RM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Type: Trigon 80° indexable insert Key numbers Clearance angle: 7° Corner radius: 0.4 mm Plate form: Trigon 80° Plate size: 04 Plate thickness: 02 Special features Grade: WSM20S Chipbreaker: RM4 Coating: Tiger·tec Silver (coated carbide) Material applicability: S / M (superalloys/titanium; stainless steel) Tolerance class: M FAQ Which materials are best machined with this insert? The WCMT040204-RM4 WSM20S insert is specified for ISO groups M and S, making it suitable for stainless steel and heat‑resistant superalloys or titanium where thermal stability and edge life are critical. What does the RM4 chipbreaker provide? The RM4 chipbreaker promotes controlled chip segmentation and evacuation at moderate to heavy feed rates, reducing entanglement and improving overall process stability with the WSM20S grade. Why choose a Trigon 80° form for turning tasks? The Trigon 80° geometry offers a robust cutting edge and good access to shoulders and profiles; it balances strength and reach, which is beneficial for interrupted cuts and general turning with the coated grade. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces friction and improves heat resistance at the cutting edge, enabling longer tool life and more consistent wear behaviour compared with uncoated substrates in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
WCMT040204-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a WSM30S grade for demanding materials and a Trigon 80° geometry with RM4 chipbreaker for stable chip control; order the insert directly via Metav Werkzeuge or consult our technical advisers for selection support. WCMT040204-RM4 WSM30S — Trigon 80° indexable insert for stainless steels and superalloys (Walter Tools) The WCMT040204-RM4 WSM30S is an indexable turning and boring insert designed for productive machining of stainless steels and heat‑resistant superalloys, offering a coated carbide grade optimised for edge stability and secure chip formation. Tiger‑tec Silver coating for heat resistance WSM30S grade for stainless and superalloys Trigon 80° form for stable engagement RM4 chipbreaker for consistent chip control High‑performance cutting for tough materials The coated carbide composition of this insert, part of the Tiger‑tec Silver series, provides a balance of wear resistance and thermal stability that benefits machining of stainless steels and superalloys. With a pronounced trigon geometry, the insert offers an optimised cutting edge that reduces vibration and improves tool life. The combination of a 7° clearance and a 0.4 mm corner radius supports secure chip formation while maintaining acceptable surface finish; this is particularly useful when workpieces tend to work‑harden or generate high cutting temperatures. The result is consistent productivity and fewer tool changes during medium‑ to heavy‑duty turning operations. Coating and grade: why they matter for process reliability The WSM30S grade is a coated carbide formulated to retain edge strength under thermal load, which directly reduces the risk of built‑up edge on difficult alloys. The Tiger‑tec Silver coating enhances oxidation resistance and supports repeatable cutting performance across long runs. Using a chipbreaker such as RM4 moderates chip shape and evacuation, lowering the likelihood of surface damage and machine downtime. These technical characteristics translate into measurable process security: fewer reworks, improved surface consistency and extended indexable‑insert life in continuous production environments. Practical setup and machining advice For best results with this Trigon 80° insert, select a compatible toolholder that supports the WCMT format and set cutting parameters according to material group: moderate cutting speeds and higher feeds for stainless steels to avoid rubbing, and reduced depths of cut when tackling very heat‑resistant superalloys. The 7° clearance reduces flank contact, while the 0.4 mm corner radius balances edge strength and achievable finish. When integrating into CNC programmes, monitor temperatures and chip formation during first passes to confirm stability; the insert is optimised for predictable chip control and repeatable part quality. For technical advice on selecting the correct Walter Tools Tiger‑tec Silver insert and to place an order through Metav Werkzeuge, contact our specialists at Metav Werkzeuge for delivery and application support. Technical Data Article number: WCMT040204-RM4-WSM30S-WALTER Designation: WCMT040204-RM4 WSM30S Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte (indexable turning/boring insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Trigon 80° Plate size: 04 Plate thickness: 02 Tolerance class: M Chipbreaker: RM4 Special features Coated carbide grade (Tiger‑tec Silver) Suitable for stainless steels (ISO M) and superalloys/titanium (ISO S) Designed for stable chip formation and edge durability Trigon geometry for secure tool engagement and vibration resistance FAQ What materials is this insert suitable for? The WCMT040204-RM4 WSM30S insert is designed primarily for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), benefiting from the Tiger‑tec Silver coating and WSM30S grade. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker controls chip shape and evacuation to reduce surface defects and improve process stability when using the WCMT040204-RM4 WSM30S in turning and boring applications. Which geometry ensures stable engagement with this insert? The Trigon 80° form of the insert provides a broad seating and positive cutting engagement, contributing to vibration resistance and consistent cutting performance with the WCMT040204-RM4 WSM30S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metal machining and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands beyond distribution. The offered item is an original, factory‑new product of the manufacturer.
WCMT040204-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, RP4 chip control and the Trigon 80° geometry for a stable, economical machining process; order the insert directly via Metav Werkzeuge or consult the team for application advice. WCMT040204-RP4 WPP20G Trigon 80° indexable insert for Stahl machining — Walter Tools The WCMT040204-RP4 WPP20G is a Trigon 80° indexable insert designed for drilling, boring and turning tasks in Stahl, optimised with the Tiger·tec Gold coated carbide grade for consistent wear resistance and chip control. Tiger·tec Gold coating for robust wear resistance Optimised RP4 chipbreaker for reliable chip control Trigon 80° geometry for stable turning and boring 0.4 mm corner radius for reproducible edge strength Consistent performance through a coated carbide grade The combination of the WPP20G grade and the Tiger·tec Gold coating provides a reliable basis for machining a wide range of Stahl applications according to ISO P. The coating technology reduces flank wear and improves heat resistance, which in turn stabilises tool life and process windows. As a result, shorter setup times and fewer tool changes can be expected, supporting higher machine utilisation and lower unit costs. Controlled chips and secure surface results Thanks to the dedicated RP4 chipbreaker and the Trigon 80° geometry, the insert delivers predictable chip formation and evacuation under typical turning and boring conditions. The 0.4 mm corner radius and the 7° relief angle maintain a robust cutting edge while reducing risk of edge chipping during interrupted cuts. These features translate directly into reproducible surface finishes and fewer rework operations. Versatility for turning, boring and drilling operations The insert’s Trigon form and dimensional design (series size 04, thickness 02) permit straightforward use in compact toolholders and multi‑operation setups. With tolerance class M, the insert offers consistent seating accuracy and stable clamping performance, which helps maintain repeatable cutting conditions across batch runs. This adaptability makes the grade suited to general and semi‑rough steel machining tasks. Practical handling and process advantages A coated, indexable insert minimises downtime through quick indexing and consistent tolerances. The WCMT040204-RP4 WPP20G design supports efficient tool inventories: one grade covers many Stahl variants, reducing the need for multiple specialised inserts. Walter Tools’ production standards and the Tiger·tec Gold technology contribute to predictable tool wear patterns and easier process optimisation on both CNC lathes and boring heads. For application-specific selection or to secure the WCMT040204-RP4 WPP20G for immediate use, contact Metav Werkzeuge for tailored advice and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WCMT040204-RP4-WPP20G-WALTER Manufacturer: Walter Tools Designation: WCMT040204-RP4 WPP20G Facts Geometry: Trigon 80° Corner radius: 0.4 mm Relief angle: 7° Size code: 04 Thickness code: 02 Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Applicable material group: Stahl (ISO P) Execution: T FAQ What materials is this insert suitable for? The WCMT040204-RP4 WPP20G is designed for Stahl (ISO P) machining and is optimised for a broad range of steel alloys. How does the RP4 chipbreaker benefit production? The RP4 chipbreaker on the insert improves chip control and evacuation, allowing for more stable cutting conditions and reduced risk of chip-related interruptions. Is the insert compatible with standard Trigon toolholders? Yes, the Trigon 80° form and size code 04 make the insert compatible with common toolholders designed for triangular indexable inserts. What does the Tiger·tec Gold coating provide? Tiger·tec Gold coating increases wear resistance and thermal stability, extending usable tool life and enabling higher process reliability during Stahl machining. How does the 0.4 mm corner radius affect machining? A 0.4 mm radius provides a stronger cutting edge for semi‑rough and finishing operations, offering a balance between edge strength and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. The mention of brand names, such as Walter Tools, is for explanatory purposes only and does not imply any affiliation. The offered article is an original, factory‑new product from the manufacturer.
WCMT040208-FP4 WPP20G T Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the FP4 chipbreaker provides reliable chip control and extended tool life while ensuring process stability for machining Stahl; order or request application advice via Metav Werkzeuge for rapid integration into production. WCMT040208-FP4 WPP20G Drilling/Boring insert / Turning insert, Trigon 80°, Tiger‑tec Gold — Walter Tools The WCMT040208-FP4 WPP20G is a Trigon 80° indexable insert optimised for stable, efficient machining of Stahl, offering consistent chip formation and a durable coated-carbide grade for productive series machining. Tiger‑tec Gold coating for long life Designed for Stahl machining Trigon 80° form for stability FP4 chipbreaker for consistent chips Higher productivity through advanced coating and grade The Tiger‑tec Gold coating combined with the WPP20G grade delivers a wear-resistant cutting edge that maintains performance under continuous production loads. As a coated carbide solution, it reduces flank wear and extends tool life compared with uncoated grades, so cycle times stay predictable and tooling changeovers are less frequent. This results in measurable cost-efficiency and improved uptime in batch and serial turning operations. Reliable chip control and stable cutting geometry The integral FP4 chipbreaker and Trigon 80° geometry create dependable chip formation across a range of cutting conditions, improving surface finish and reducing rework. The 7° relief angle and 0.8 mm corner radius support secure seating and vibration resistance, translating into consistent component accuracy. These features are particularly beneficial where repeatability and process stability are required for medium to heavy interrupted cuts. Application guidance and shop-floor benefits Rated for the material group P (Stahl), the insert suits general-purpose turning and boring tasks in production environments that prioritise productivity and tool life. The M tolerance classification ensures interchangeability and consistent fitment in standard toolholders. The insert’s series characteristics make it well suited to volume production, offering predictable performance and simpler tooling logistics for toolrooms and manufacturing planners. For machining advice, grade selection or availability of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge to discuss specific applications and to receive tailored recommendations. Technical data SKU: WCMT040208-FP4-WPP20G-WALTER Product designation: WCMT040208-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Numbers / Core technical data Relief angle: 7° Corner radius: 0.8 mm Plate form: Trigon 80° Plate size: 04 Plate thickness code: 02 Tolerance class: M Special features Grade: WPP20G Chipbreaker: FP4 Material group suitability: P (Stahl) Execution: T Sortenbeschreibung: coated cemented carbide FAQ What materials is this insert suitable for? The insert is specified for material group P, meaning it is suitable for machining Stahl; the WPP20G grade and Tiger‑tec Gold coating are optimised for typical heat and chip formation encountered when machining such steels. How does the FP4 chipbreaker improve production? The FP4 chipbreaker promotes predictable chip shapes and evacuation, improving surface quality and reducing interruptions; together with the Trigon 80° form it supports steady production cycles and fewer tool-related stops. Is the WCMT040208-FP4 WPP20G compatible with standard toolholders? Yes, the geometry and M tolerance classification ensure compatibility with common toolholder systems designed for Trigon 80° inserts, allowing straightforward integration into existing tool setups. What are the main benefits of Tiger‑tec Gold for production shops? Tiger‑tec Gold provides enhanced wear resistance and edge stability, which prolongs cutting life and supports consistent part quality under continuous or cyclic production conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT040208-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold grade WPP20G and the FP6 chipbreaker to ensure consistent chip control and long tool life in steel turning operations; the Trigon 80° geometry and 0.8 mm corner radius deliver robust cutting edges for demanding jobs. Order the WCMT040208-FP6 WPP20G directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. WCMT040208-FP6 WPP20G indexable turning insert — Trigon 80°, Tiger‑tec Gold, Walter Tools The WCMT040208-FP6 WPP20G is an indexable turning insert designed for reliable steel machining, combining a Tiger‑tec Gold coated grade with an FP6 chipbreaker and a Trigon 80° geometry for demanding turning tasks Tiger‑tec Gold grade WPP20G for steel machining FP6 chipbreaker for reliable chip control Trigon 80° geometry for robust cutting edges 0.8 mm corner radius and 7° clearance Greater productivity from a specialised carbide grade The insert uses the WPP20G grade within the Tiger‑tec Gold family, a coated carbide formulated specifically for P‑group materials (steel). This composition balances wear resistance and toughness to support consistent cutting performance across a wide range of steels. By reducing flank wear and maintaining edge stability, the grade helps to extend tool life and reduce downtime, which translates directly into lower process costs per component and more predictable machining cycles. Improved chip control and machining security Equipped with the FP6 chipbreaker, the geometry is engineered to shape and evacuate chips reliably during turning. Effective chip formation reduces the risk of entanglement, improves surface finish and protects the toolholder and workpiece from damage. In practical terms, better chip control leads to fewer machine stops and a steadier production flow, particularly in medium to heavy cutting conditions where chip management is critical. Robust geometry for demanding turning tasks The Trigon 80° form combined with a 0.8 mm corner radius and 7° clearance provides strong cutting edges that withstand interrupted cuts and heavier radial depths. The medium tolerance class (M) supports repeatable seating in indexed toolholders, promoting consistent part-to-part accuracy. Designed primarily for steel applications according to ISO P, the insert is suitable for universal machining tasks where a balance of surface quality and edge life is required. Practical benefits for the workshop Using this insert delivers measurable operational advantages: predictable tool behaviour under changing loads, simplified grade selection for steel components, and compatibility with standard Trigon toolholder systems. The combination of grade, chipbreaker and geometry reduces the need for frequent tool changes and fine‑tuning, allowing operators to focus on process optimisation rather than constant corrective action. For teams seeking reliable, production-ready inserts, this solution supports higher throughput with lower process risk. Contact Metav Werkzeuge for tailored advice on integrating the WCMT040208-FP6 WPP20G into existing setups or to discuss batch availability and recommended cutting data Technical data Article number: WCMT040208-FP6-WPP20G-WALTER SKU: WCMT040208-FP6-WPP20G-WALTER Product type: Indexable turning insert Numbers / Core technical data Corner radius: 0.8 mm Clearance: 7° Plate form: Trigon 80° Plate size: 04 Plate thickness: 02 Tolerance class: M Special features / Versions Grade: WPP20G (Tiger‑tec Gold, coated carbide) Chipbreaker: FP6 Series: Tiger‑tec Gold Execution: T Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The WCMT040208-FP6 WPP20G from Walter Tools is designed primarily for steel (ISO P) machining; the WPP20G grade balances wear resistance and toughness for typical steel turning applications. How does the FP6 chipbreaker affect machining? The FP6 chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement during turning operations with the WCMT040208-FP6 WPP20G. Can the insert cope with interrupted cuts? Yes. The Trigon 80° geometry together with a 0.8 mm corner radius and 7° clearance gives the insert the robustness required to withstand interrupted cuts and heavier radial engagement. Is the WCMT040208-FP6 compatible with standard Trigon toolholders? The WCMT040208-FP6 form follows common Trigon mounting conventions and is compatible with toolholders designed for Trigon 80° inserts; confirm seat and clamping details with the toolholder manufacturer. What are the main advantages of the Tiger‑tec Gold grade for production use? Tiger‑tec Gold grade WPP20G offers a combination of wear resistance and toughness that delivers longer tool life, stable edge performance and reliable results across a broad range of steel alloys. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names and product designations are used for explanatory purposes only. The offered item is an original, factory‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com