WCMT06T302-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold grade and the WPP20G carbide to achieve stable, long-lasting performance in steel turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for process recommendations. WCMT06T302-FP4 WPP20G Trigon 80° turning insert — Tiger·tec Gold (Walter Tools) A durable WCMT06T302-FP4 WPP20G indexable insert for turning and boring applications, engineered for steel (ISO P) machining with a 0.2 mm corner radius and FP4 chipformer for consistent surface quality Tiger·tec Gold coating for long tool life Designed for steel machining (ISO P) Trigon 80° form for robust cutting edges 0.2 mm corner radius for precise finishes Consistent wear resistance for extended tool life The combination of the WPP20G grade and the Tiger·tec Gold coating delivers a balanced hardness and toughness that resists flank and crater wear during continuous steel turning. This grade has been developed for typical heat and chip formation in ISO P materials, which translates into fewer insert changes and higher uptime. The coated cemented carbide composition supports predictable flank wear behaviour, enabling stable parameter windows and more reliable cycle times in production. As a result, process planners can expect improved tool life and reduced overall tooling costs without compromising cutting performance. Geometry that stabilises medium to heavy cuts The Trigon 80° form and the 7° relief angle create a robust cutting geometry that tolerates interrupted cuts and moderate engagement angles common in external turning and boring operations. The nominal plate size and T3 thickness provide a stable seat in common toolholders, while the 0.2 mm corner radius contributes to edge strength and part finish—particularly useful when slightly radiused corners help avoid edge chipping under higher loads. These geometric choices mean fewer insert failures, a steadier cutting feel, and more consistent part tolerances in serial production. Controlled chip formation for improved surface finish Equipped with the FP4 chipbreaker, the insert promotes effective chip control during the cutting process. The chipformer is tailored to ISO P cutting conditions, encouraging short, segmental chips that evacuate reliably and reduce the risk of built-up edge. Improved chip control reduces surface irregularities and machining marks, which helps achieve tighter surface-finish targets and minimises rework or secondary finishing. In short, the chip control design supports both efficiency on the line and the visual and dimensional quality expected in finished steel components. Production-ready tolerance and application spectrum With a tolerance class of M and validation for steel machining, this indexable insert is a practical choice for general-purpose turning where consistent performance is required. The product’s specification supports a wide range of common steel grades, offering a straightforward tooling solution across mixed-production environments. The insert’s attributes favour predictable tool changes, stable feeds and speeds, and a straightforward integration into established turning toolsets, making it suitable for both jobbing shops and longer production runs where repeatability is essential. For tailored advice on integrating Walter Tools’ Tiger·tec Gold inserts into a machining cell, or to request availability and batch information, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations. Technical data Article number: WCMT06T302-FP4-WPP20G-WALTER Product designation: WCMT06T302-FP4 ISO designation: WCMT06T302-FP4 WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Core measurements Plate size: 06 Plate form: Trigon 80° Corner radius: 0.2 mm Relief angle: 7° Plate thickness: T3 Tolerance class: M Chipbreaker: FP4 Features and materials Coating/grade: WPP20G Suitable for: Steel (ISO P) Application: Turning / boring indexable insert Series characteristic: balanced wear resistance and toughness FAQ What materials is this insert intended for? The WCMT06T302-FP4 WPP20G insert is specified for steel (ISO P) machining and is optimised for the heat and chip formation patterns typical of unalloyed and alloyed steels. How does the Tiger·tec Gold grade affect performance? The Tiger·tec Gold grade provides a coated carbide structure that balances hardness and toughness, improving wear resistance and delivering more consistent tool life during steel turning with the WCMT06T302-FP4 WPP20G. Which toolholders are compatible with the Trigon 80° form? Standard turning and boring toolholders designed for 80° trigon inserts will accept this form; the geometry ensures a secure seat and stable cutting behaviour for the WCMT06T302-FP4 series. What benefit does the FP4 chipbreaker provide? The FP4 chipbreaker improves chip control under ISO P conditions, producing short chips that evacuate reliably and enhancing surface finish and part quality when using this insert. Is the insert suitable for interrupted cuts? Yes. The Trigon 80° geometry, the 0.2 mm corner radius and the Tiger·tec Gold grade combine to offer robust edge strength that tolerates interrupted cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned solely for clarification. There is no affiliation between Metav Werkzeuge and the trademark owners; the offered article is an original, brand-new product from the manufacturer.
WCMT06T304-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the insert’s trigon geometry for consistent hole quality and long tool life; the combination of a wear-resistant WPP20G coating and a defined 0.4 mm corner radius supports stable chip formation and reliable productivity. Order the insert directly via Metav Werkzeuge or contact the Metav Werkzeuge team for application support. WCMT06T304-E47 WPP20G drill/reaming indexable insert — Trigon 80° form, for steel machining, Walter Tools The WCMT06T304-E47 WPP20G is an indexable insert designed for drilling and reaming operations, optimised for machining steel with a Tiger·tec Gold coated carbide grade and a Trigon 80° geometry that enhances hole entry stability and repeatable component tolerances. Tiger·tec Gold coated carbide grade Trigon 80° insert form 7° clearance angle Suitable for steel machining High productivity for steel component machining The coated carbide WPP20G grade delivers a balanced combination of wear resistance and toughness that is particularly effective for machining steel. The Tiger·tec Gold technology reduces flank wear and extends edge life under typical drilling loads, which translates into fewer indexings and less downtime. For production environments where cycle times and tool-change frequency affect throughput, this insert contributes to a measurable increase in process efficiency and consistent hole quality. Geometry and chip control for stable cutting conditions The Trigon 80° form combined with a 0.4 mm corner radius and a 7° clearance angle provides a secure cutting edge that reduces thrust and vibration during entry. The E47 chipbreaker is engineered to control chip shape during interrupted cutting and variable depths, improving evacuation and minimising recutting. This geometry aids in maintaining dimensional accuracy and surface finish in bores and reamed holes, while supporting stable cutting forces that protect both tool and spindle. Coating and material pairing to extend tool life The insert’s coated carbide composition and the Tiger·tec Gold surface treatment are tuned for the thermal and mechanical demands of steel machining. The coating improves resistance to adhesive wear and thermal softening during high material removal, which in turn supports longer service intervals and more predictable changeovers. In mixed-series production where different steel grades are processed, the insert’s balanced properties help to preserve edge integrity and reduce scrap rates. Practical integration in production workflows With a standard WCMT06T304-E47 designation and compact 06 size, the insert fits common holder systems for drilling and reaming applications, allowing straightforward retrofitting into existing tool assemblies. The moderate tolerance class M and standardised form factor simplify inventory management and tool planning. Combined with Metav Werkzeuge’s availability and application advice, the insert can be integrated into both small-batch and continuous manufacturing setups to raise process reliability. For consistent, high-productivity steel drilling choose the Tiger·tec Gold WCMT06T304-E47 WPP20G from Metav Werkzeuge or contact Metav Werkzeuge for individual application recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WCMT06T304-E47-WPP20G-WALTER Product: drill/reaming indexable insert Grade: WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: T3 Form: Trigon 80° Tolerance class: M Special features Coating technology: Tiger·tec Gold Cutting material: coated carbide Chipbreaker: E47 Material application: steel (P) Designation: WCMT06T304-E47 WPP20G FAQ What materials is this insert suitable for? The WCMT06T304-E47 WPP20G insert from Walter Tools is intended for steel machining (ISO group P) and is optimised for the thermal and chip-formation behaviour typical of that material. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WCMT06T304-E47 WPP20G enhances wear resistance and thermal stability, resulting in longer edge life and more consistent hole quality during drilling and reaming operations. Which geometry improvements support hole accuracy? The Trigon 80° form, combined with a 0.4 mm corner radius and 7° clearance angle, gives the insert stable cutting engagement and controlled chip flow, which helps to maintain dimensional accuracy in bores. Can the insert be used in standard drilling holders? The WCMT06T304-E47 WPP20G follows common insert dimensions and fits typical holders used for drilling and reaming, enabling straightforward integration into existing tool setups. What operational benefits can be expected in production? Using the WCMT06T304-E47 WPP20G insert yields fewer tool changes, improved process stability and reduced scrap rates thanks to its balanced coated-carbide grade and chip-control features. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT06T304-E47 WPP20S WPP20S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, a Trigon 80° geometry and chipbreaker E47 ensures stable chip control and consistent productivity when machining steel; order this insert via Metav Werkzeuge or consult the team for process optimisation. WCMT06T304-E47 WPP20S – Drilling/bore indexable insert, Tiger·tec Silver, for steel | Walter Tools WCMT06T304-E47 WPP20S is a coated carbide indexable insert designed for drilling and bore machining in steel applications, offering a balance of wear resistance and general-purpose performance. Tiger·tec Silver coated carbide Trigon 80° insert shape 0.4 mm corner radius Designed for steel machining Consistent, productive machining for steel components The WCMT06T304-E47 WPP20S insert brings predictable tool life and reliable performance to machining of unalloyed and alloyed steel. The combination of a coated carbide grade and an optimised chipbreaker supports stable chip formation under the heat and load typical for steel cutting. This translates into fewer interruptions for tool changes and a steady process output, which is particularly relevant for machining runs where repeatability and uptime are priorities. The design emphasises practical productivity rather than niche specialism. Geometry engineered for stability and surface quality The Trigon 80° shape and 0.4 mm corner radius provide a robust cutting edge that resists chipping while promoting a controlled cutting action. The moderate corner radius helps to balance edge strength with surface finish, making the insert suitable for applications that demand both tool life and acceptable surface quality. A 7° relief angle reduces rubbing at entry while maintaining cutting stability. These geometric choices support a consistent part finish and reduce the need for corrective operations after machining. Tiger·tec Silver coating for extended tool life and process security The insert’s Tiger·tec Silver technology denotes a coated carbide construction tailored for broad steel applications. The coating improves resistance to abrasive wear and thermal loading, helping to maintain a sharp cutting edge over longer intervals. The chipbreaker E47 complements the grade by guiding chips reliably through the cut, reducing the risk of built-up edge and improving process stability across variable cutting conditions. For operations seeking predictable intervals between indexings, this grade provides a dependable baseline. Practical application notes and compatibility This insert is supplied in an industry-standard WCMT06T304-E47 format and suits holders designed for trigon-shaped drilling and bore operations. The designation indicates the insert geometry and chipcontrol version; compatibility with the holder and clamping system should be verified before use. The insert’s tolerance class M reflects typical manufacturing tolerances for consistent indexing and seating. Operators can expect straightforward integration into existing drilling/boring toolchains where steel is the primary workpiece material. For process-oriented procurement and availability of the Walter Tools WCMT06T304-E47 WPP20S insert with Tiger·tec Silver, contact Metav Werkzeuge for tailored advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: WCMT06T304-E47-WPP20S-WALTER Designation: WCMT06T304-E47 WPP20S Type: Drilling/bore indexable insert Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Plate thickness: T3 Insert form: Trigon 80° Tolerance class: M Materials & features Series: Tiger·tec Silver Grade: WPP20S (coated carbide) Chipbreaker: E47 Application group: P (steel) Execution/version: T FAQ What materials is this insert intended for? The WCMT06T304-E47 WPP20S is specified for machining steel (ISO group P) and is engineered to handle the typical heat and chip characteristics of steel cutting. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on this Walter Tools insert enhances wear resistance and thermal stability, supporting longer cutting intervals and more consistent edge retention in steel operations. Which insert geometry should the holder support? Holders must accept a Trigon 80° insert form; the WCMT06T304-E47 format requires compatible clamping and seating to ensure correct positioning and tolerance adherence. What benefit does the E47 chipbreaker provide? The E47 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built-up edge and fostering steady machining cycles in a range of steel cutting conditions. Is this insert suitable for finishing and semi-finishing passes? With a 0.4 mm corner radius and moderate geometry, the insert is appropriate for a mix of finishing and semi-finishing operations where a balance between surface quality and tool robustness is needed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer (Walter Tools).
WCMT06T304-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the proven combination of durable Tiger‑tec Silver coating and the WSM20S grade for stable chip formation and extended tool life; the Trigon 80° geometry and FM4 chipbreaker further enhance process reliability for machining stainless steel and heat‑resistant alloys. Order directly via Metav Werkzeuge or ask their consultants for material‑specific recommendations. WCMT06T304-FM4 WSM20S turning / drilling indexable insert — Trigon 80°, Tiger‑tec Silver A high‑performance insert designed for turning and drilling applications, featuring the WSM20S coated carbide grade and a Trigon 80° form for secure cutting in stainless steel and heat‑resistant superalloys Tiger‑tec Silver coating for durability Trigon 80° geometry for stable cutting WSM20S grade for stainless steel and S alloys 0.4 mm corner radius; 7° relief angle Consistent tool life through advanced coating and grade The Tiger‑tec Silver technology combined with the WSM20S coated carbide provides a balance of wear resistance and thermal stability that is especially useful when machining stainless steel and other difficult‑to‑cut materials. The coated grade supports stable chip formation under elevated temperatures, which reduces the risk of built‑up edge and extends the interval between index changes. For production environments this translates into fewer interruptions and a steadier output quality, with measurable efficiency gains when compared to uncoated or conventional grades. Geometry engineered for edge strength and surface quality The Trigon 80° form and a 0.4 mm corner radius are designed to increase cutting edge robustness while maintaining good accessibility for shoulder and form‑turning operations. The 7° relief angle reduces flank contact and helps manage heat flow at the cutting zone. The integrated FM4 chipbreaker promotes predictable chip control across a range of depths of cut, improving swarf evacuation and reducing the likelihood of surface damage. These geometric choices help produce a reliable surface finish and reduce secondary operations. Application focus and operational benefits Intended primarily for machining stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), this insert delivers enhanced process security in demanding assemblies and batch production. The carbide substrate and coating combination offers resistance against abrasive wear and thermal load, allowing longer productive cutting times and consistent dimensional results. In practice, this means fewer tool changes, lower handling time and improved throughput — a clear advantage for job shops and production lines where uptime and repeatability matter. For tailored cutting data, grade selection or to verify suitability for specific stainless steel or superalloy grades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert advice and ordering assistance Technical Data Article number: WCMT06T304-FM4-WSM20S-WALTER Designation: WCMT06T304-FM4 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Product type: Turning / drilling indexable insert Facts Insert form: Trigon 80° Size: 06 Thickness: T3 Corner radius: 0.4 mm Relief (free) angle: 7° Chipbreaker: FM4 Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Material applicability: stainless steel (M), heat‑resistant superalloys and titanium (S) Application: turning and drilling indexable insert for difficult‑to‑cut materials FAQ What materials is this insert best suited for? The WCMT06T304‑FM4 WSM20S insert from Walter Tools is optimised for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering improved chip formation and edge stability in these materials. How does the Tiger‑tec Silver coating benefit production? Tiger‑tec Silver on the WSM20S grade enhances thermal resistance and wear behaviour, which lengthens tool life and supports consistent cutting performance under higher temperatures typical when machining stainless steel. What role does the FM4 chipbreaker play? The FM4 chipbreaker channels swarf reliably and promotes short, controllable chips across a range of depths of cut, reducing the risk of entanglement and improving surface finish when using this insert in turning or drilling operations. Can the insert be used for both turning and drilling? Yes — the geometry and grade of this turning/drilling indexable insert make it suitable for combined operations where a Trigon 80° form and robust edge are required; compatibility depends on the toolholder system and machining parameters. What cutting‑edge features improve process reliability? A Trigon 80° shape, a 0.4 mm corner radius and a 7° relief angle together provide edge strength and heat management, which aid repeatable dimensional accuracy and reduce the frequency of tool changes during production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original factory‑new product of the manufacturer.
WCMT06T304-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, WSM30S grade and a secure FM4 chipbreaker for reliable machining of difficult materials; order directly via Metav Werkzeuge or contact the consultants for tailored application advice. WCMT06T304-FM4 WSM30S — Boring / reaming indexable insert / turning indexable insert by Walter Tools, Trigon 80° with 7° clearance The WCMT06T304-FM4 WSM30S is an indexable insert designed for heavy-duty machining of stainless steel and heat-resistant alloys, combining Tiger·tec Silver coating with a Trigon 80° form Tiger·tec Silver coated grade WSM30S Suited for stainless steel and superalloys Trigon 80° geometry, 0.4 mm corner radius FM4 chipbreaker for secure chip control High-performance grade for demanding materials The combination of the WSM30S grade and the Tiger·tec Silver coating is engineered for stability when machining stainless steel and heat-resistant superalloys. The coated carbide substrate provides improved edge life and thermal resistance, which supports a predictable tool life even under challenging workpiece conditions. This indexable insert's specification emphasises controlled chip formation and reduced risk of built-up edge, translating into fewer interruptions and a steadier production output. The engineering focus is on achieving consistent surface quality and repeatable dimensional results when processing tough-to-machine alloys. Geometry and chip control that protect productivity The Trigon 80° plate form with a 0.4 mm corner radius and 7° clearance angle offers a robust cutting edge while maintaining the necessary clearance to avoid rubbing. The FM4 chipbreaker is tailored to break and evacuate chips effectively in interrupted or continuous cuts typical for boring and turning operations. These geometry choices reduce cutting forces and support stable cutting conditions, which in turn lowers the likelihood of tool chatter and improves overall process reliability. The insert’s thickness T3 and the specified plate size ensure secure clamping in most standard indexable holders for turning and boring. Application guidance and process advantages This insert is intended for operations where material workability is limited by toughness or poor thermal conductivity — specifically stainless steel (ISO group M) and superalloys/titanium (ISO group S). Where moderate to heavy cutting is required, the coated grade offers a balance of wear resistance and edge toughness. When implementing this insert, pair it with a rigid toolholder and appropriate cutting parameters for the material class; modestly increased feed and conservative speeds for superalloys, and optimised coolant use for stainless steel, will enhance performance. The result is improved process security, fewer tool changes and more predictable production cycles. Contact Metav Werkzeuge for a process consultation or to source Walter Tools inserts for specific machining setups—Metav Werkzeuge can advise on holder compatibility and cutting data tailored to the WSM30S grade Technical Data Article number: WCMT06T304-FM4-WSM30S-WALTER Item designation: WCMT06T304-FM4 Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Plate form: Trigon 80° Plate size: 06 Plate thickness: T3 Chipbreaker: FM4 Tolerance class: M Features and Applications Coating / technology: Tiger·tec Silver Substrate: coated carbide (beschichtetes Hartmetall) Material suitability: S / M Intended materials: stainless steel; heat-resistant superalloys and titanium Typical use: boring, reaming and turning operations on difficult-to-machine alloys Design emphasis: stable chip formation and secure cutting edge FAQ What materials is this insert suitable for? The WCMT06T304-FM4 WSM30S is suited for stainless steel (ISO group M) and for heat-resistant superalloys/titanium (ISO group S), reflecting the grade’s focus on thermal and edge stability. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver on this insert enhances thermal resistance and wear behaviour, providing longer edge life and more consistent performance in the demanding conditions encountered when machining stainless steel and superalloys. Is the Trigon 80° form suitable for boring operations? Yes — the Trigon 80° geometry delivers a sturdy cutting edge angle appropriate for both turning and boring tasks, offering a good balance between strength and accessibility in internal operations. What is the purpose of the FM4 chipbreaker? The FM4 chipbreaker is configured to produce controllable chip shapes and to evacuate chips reliably, which reduces the risk of chip congestion and supports uninterrupted machining cycles. Can this insert be used in standard Walter toolholders? The insert’s WCMT designation and plate size are compatible with standard indexable turning and boring holders designed for Trigon 80° inserts; confirm seat and clamping specifications with Metav Werkzeuge for exact compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
WCMT06T304-FP4 WPP20G FP4 Wendeplatten - Walter Tools
Take advantage of the cost-effective performance, Tiger·tec Gold surface technology and the stable Trigon geometry for consistent machining results; order directly via Metav Werkzeuge or request application advice from our consultants. WCMT06T304-FP4 WPP20G Trigon 80° indexable insert – Walter Tools The WCMT06T304-FP4 WPP20G is a Trigon 80° indexable insert designed for robust turning and boring in steel applications Tiger·tec Gold coated carbide grade WPP20G Trigon 80° form for stable cutting FP4 chipbreaker optimised for steel Corner radius 0.4 mm, clearance 7° High-performance grade for tough steel applications The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance of wear resistance and toughness tailored for steel (ISO group P). This coated carbide composition helps to withstand the elevated temperatures and typical chip formation encountered when machining unalloyed and alloyed steels, offering prolonged cutting edge life and reliable surface finish. The FP4 chipbreaker is designed to produce predictable chip shapes in common turning and boring operations, reducing the risk of built-up edge and improving process stability. These characteristics translate into fewer tool changes and a more efficient production flow. Geometry that provides rigidity and repeatable accuracy The Trigon 80° insert form, combined with a corner radius of 0.4 mm and a clearance angle of 7°, enhances cutting stability and repeatability in demanding operations. The acute trigonal shape increases the effective cutting edge and provides a rigid seating in the toolholder, which reduces vibration and contributes to consistent dimensional accuracy. The specified T3 thickness and size 06 further support a robust interface between insert and holder, making the system particularly suitable for medium to heavy cutting conditions where stability is essential. Operational advantages and lifecycle economy A clearly defined chip control strategy and the FP4 chipbreaker reduce swarf issues and help maintain machine uptime. The insert’s properties—coating, grade and geometry—are selected to deliver productive cutting across a broad range of steel machining tasks, which often results in lower overall tooling costs per component through extended life and fewer interruptions. For production planning, these inserts integrate well into standard indexable tooling systems and support repeatable part quality. If additional technical data or cutting parameter recommendations are required, Metav Werkzeuge provides application guidance and detailed advice by e‑mail or telephone. For application-specific consultation on Walter Tools Tiger·tec Gold inserts and fast supply from Metav Werkzeuge, contact Metav Werkzeuge for tailored technical advice and reliable availability. Technical Data Article number: WCMT06T304-FP4-WPP20G-WALTER Designation: WCMT06T304-FP4 WPP20G Manufacturer: Walter Tools Specifications Shape: Trigon 80° Clearance angle: 7° Corner radius: 0.4 mm Size: 06 Thickness: T3 Tolerance class: M Materials & Features Grade/coating: WPP20G (Tiger·tec Gold) Chipbreaker: FP4 Applicable material: Steel (ISO group P) Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suitable for? The WCMT06T304-FP4 WPP20G insert by Walter Tools is intended for machining steel, corresponding to ISO group P. How does the Tiger·tec Gold grade improve machining performance? Tiger·tec Gold on the WPP20G grade enhances wear resistance and heat management for Walter Tools inserts, helping to extend edge life during high-temperature steel turning. What advantage does the FP4 chipbreaker provide? The FP4 chipbreaker on this Walter Tools indexable insert promotes controlled chip formation in steel, improving swarf evacuation and reducing the likelihood of built-up edge. Why choose a Trigon 80° geometry for turning operations? The Trigon 80° form offers a robust cutting edge and stable seating in the toolholder; for the WCMT06T304-FP4 WPP20G this supports improved vibration damping and consistent dimensional results. What are the key dimensional details to consider for toolholder selection? This Walter Tools insert specifies a corner radius of 0.4 mm, a clearance angle of 7° and a thickness of T3; the SKU is WCMT06T304-FP4-WPP20G-WALTER for reference. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Geschützte Markenzeichen und Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT06T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a Trigon 80° geometry and a fine 0.4 mm nose radius for reliable chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult the team for application support. WCMT06T304-MM4 WSM20S — indexable insert for drilling and turning by Walter Tools (Trigon 80°, Tiger·tec Silver) The WCMT06T304-MM4 WSM20S is an indexable insert tailored for demanding machining tasks, offering secure chip formation and thermal resistance for rostfreier Stahl and heat-resistant superalloys. Tiger·tec Silver coating for heat resistance Trigon 80° shape for secure chip control 0.4 mm nose radius for fine surface finishes Designed for rostfreier Stahl and superalloys Consistent surface quality through precise geometry and edge control The Trigon 80° design combined with a 0.4 mm nose radius ensures a predictable engagement angle and controlled cutting action, which directly improves surface finish and repeatability. For machining operations that require fine tolerances, the insert’s geometry reduces vibration and supports a stable cutting edge, translating into fewer reworks and more parts meeting specification on the first pass. This geometry is especially useful in small-diameter boring and finishing turning where tool stability determines the final contour quality. High-temperature resilience and reliable chip formation for difficult materials Equipped with the Tiger·tec Silver coating and the WSM20S grade, the insert sustains cutting temperatures and chemical wear typical of rostfreier Stahl and heat-resistant superalloys. The coating technology emphasises thermal shielding and wear resistance, allowing higher cutting parameters with reduced risk of built-up edge. In practice, this leads to longer tool life and more consistent component quality when machining materials that tend to work-harden or generate adhesive wear on the cutting edge. Productivity gains from chip management and robust construction The MM4 chipbreaker, combined with the Trigon form and T3 thickness, promotes dependable chip control across varied cutting conditions, lowering downtime caused by chip entanglement. The plate’s tolerance class M aligns with stable insert seating and repeatable indexability in turret or toolholder systems, supporting efficient changeovers and predictable process windows. Overall, the combination of chip control, coating and mechanical stability contributes to improved cycle times and a lower cost-per-part in series production. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Silver inserts and to secure the WCMT06T304-MM4 WSM20S for specific rostfreier Stahl applications: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: WCMT06T304-MM4-WSM20S-WALTER Product type: Drilling/boring and turning indexable insert Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Shape: Trigon 80° Nose radius: 0.4 mm Relief angle: 7° Size: 06 Thickness: T3 Tolerance class: M Applications & Features Coating: Tiger·tec Silver Chipbreaker: MM4 Suitable for: rostfreier Stahl (ISO group M) Also suitable for: heat-resistant superalloys and titanium (ISO group S) Designation: WCMT06T304-MM4 WSM20S FAQ Which materials are recommended for this insert? The WCMT06T304-MM4 WSM20S is specified for rostfreier Stahl (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), offering reliable performance where thermal resistance and stable cutting edges are required. What geometry and size details define the insert? This Walter Tools insert features a Trigon 80° form with a 0.4 mm nose radius and a T3 thickness, providing defined cutting geometry for fine finishes and repeatable results. What coating and grade are used on the insert? The insert uses the Tiger·tec Silver coating in the WSM20S grade, which improves thermal stability and wear resistance during high-demand machining of rostfreier Stahl and superalloys. How does the MM4 chipbreaker influence machining? The MM4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip-related interruptions and supporting consistent surface quality in both drilling and turning operations. Is this insert suitable for both drilling and turning operations? Yes; the design and cutting grade make the insert versatile for indexable drilling/boring and turning tasks where rostfreier Stahl and similar materials are processed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
WCMT06T304-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WPP20G grade together with the Trigon 80° geometry ensures long tool life and consistent chip formation when machining steel; this combination supports efficient, repeatable turning operations. Order the WCMT06T304-MP4 WPP20G turning insert directly via Metav Werkzeuge or ask our consultants if needed. WCMT06T304-MP4 WPP20G — Trigon 80° turning insert for steel | Walter Tools The WCMT06T304-MP4 WPP20G is a Trigon 80° indexable turning insert engineered for robust steel machining, combining a Tiger·tec Gold coating with an MP4 chipbreaker for reliable chip control. Tiger·tec Gold coating for long tool life WPP20G grade optimised for steel machining Trigon 80° form for stable cutting performance 7° clearance and 0.4 mm corner radius Extended tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WPP20G grade delivers measurable improvements in wear resistance for operations on steel. The coated carbide substrate reduces abrasive and adhesive wear, which translates into longer cutting intervals and fewer index changes. In practice, this means lower process interruptions and a steadier production rhythm; the coating technology is specifically formulated to manage the thermal and mechanical loads typical for ISO P materials, maintaining a stable cutting edge under continuous load. Geometry that stabilises machining and reduces rework The Trigon 80° form with a 7° clearance angle and 0.4 mm corner radius creates a robust cutting edge that resists chipping and vibration. The acute geometry concentrates cutting forces in a way that improves engagement stability during facing and light turning operations, reducing the need for secondary finishing passes. The specified corner radius supports consistent surface quality while offering a compromise between edge strength and dimensional accuracy, making the insert suitable for a range of finishing and semi‑finishing tasks. Consistent chip control for cleaner processes Equipped with the MP4 chipbreaker, this insert promotes predictable chip formation and evacuation when machining steel (ISO P). The chipbreaker profile reduces tendency for long stringy chips, improving safety at the tool zone and decreasing the risk of tool damage or part marking. Predictable chips also simplify downstream handling and reduce cycle-time variability, supporting higher overall equipment effectiveness in series production or jobbing environments. Practical integration for productive toolsets The insert designation WCMT06T304-MP4 WPP20G fits common toolholder systems for turning and boring applications, offering straightforward indexing and replacement. Compatibility with standard clamping systems minimises set‑up times and allows for quick return to cutting after insert exchange. For operations where reliable repeatability and process security are priorities, this insert contributes to predictable tool life and reproducible surface finishes, aiding quality assurance and workload planning. For application advice, tool recommendations or to source Walter Tools inserts such as the WCMT06T304-MP4 WPP20G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and ordering information Technical data Article number: WCMT06T304-MP4-WPP20G-WALTER Designation: WCMT06T304-MP4 WPP20G Product type: Turning / boring indexable insert Series: Tiger·tec Gold Facts Insert size: 06 Plate thickness: T3 Clearance angle: 7° Corner radius: 0.4 mm Plate form: Trigon 80° Tolerance class: M Special features Grade: WPP20G (coated carbide, Tiger·tec Gold) Chipbreaker: MP4 Intended material group: Steel (ISO P) Execution: T (top rake / geometry variant) FAQ What material is the WCMT06T304-MP4 WPP20G optimised for? The WCMT06T304-MP4 WPP20G is optimised for machining steel (ISO P), with the coating and grade tuned to the thermal and chip‑formation characteristics of these materials. How does the MP4 chipbreaker affect machining performance? The MP4 chipbreaker promotes predictable chip shapes and reliable evacuation, which reduces the risk of built‑up edge, improves surface finish consistency and simplifies handling in turning and boring applications. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating increases wear resistance and heat tolerance, extending tool life and supporting stable cutting conditions across extended production runs with steel workpieces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT06T304-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Benefit from a combination of robust cutting geometry, the Tiger·tec Silver coating and reliable chip control to maintain productivity when machining demanding alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application support. WCMT06T304-RM4 WSM20S indexable turning insert — Trigon 80°, Tiger·tec Silver by Walter Tools The WCMT06T304-RM4 WSM20S is an indexable turning insert designed for heavy‑duty machining of difficult‑to‑cut materials, optimised for rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for high wear resistance Trigon 80° form for robust cutting edges RM4 chipbreaker for secure chip control Optimised for rostfreier Stahl and superalloys Consistent cutting performance for demanding materials The combination of the WSM20S cutting grade and the Tiger·tec Silver coating delivers reproducible performance when processing tough materials. The coated carbide substrate is engineered to withstand elevated temperatures and resist abrasive wear, which translates into longer tool life and fewer indexings. For operations on rostfreier Stahl and heat‑resistant superalloys, the insert supports stable chip formation and reduced tendency for built‑up edge, improving component consistency and reducing scrap rates. This technical robustness leads directly to improved cycle times and predictable maintenance intervals. Geometry that secures tool life and process reliability The Trigon 80° configuration and the modest 0.4 mm corner radius provide a balance between edge strength and versatility for turning applications. The 7° clearance angle reduces friction at the flank face while maintaining a secure cutting edge during interrupted cuts. The RM4 chipbreaker is tuned for controlled chip segmentation in demanding materials, aiding evacuation and minimising the risk of rework. The insert’s T3 thickness contributes to rigidity in the toolholder, which reduces vibration and supports consistent surface finishes. For workshop planners, these geometric features mean fewer surprises at the machine and steadier output across production batches. Practical application guidance and support options Designed primarily for machining rostfreier Stahl and Superalloys/Titanium groups, the grade is also suitable for mixed production where heat resistance and edge stability are required. When selecting cutting data, consider conservative feeds and ramp up speed as process stability is confirmed; the coated grade assists by tolerating heat peaks better than uncoated alternatives. If additional specification or process maps are required, Metav Werkzeuge can provide technical advice and data sheets to match the machining scenario. For complex components or new material lots, a short evaluation run with targeted measurement of surface finish and tool wear is recommended to validate parameters before full production. Contact Metav Werkzeuge today for tailored application advice and supply of Walter Tools WCMT06T304-RM4 WSM20S inserts — eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data SKU: WCMT06T304-RM4-WSM20S-WALTER Article designation: WCMT06T304-RM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: T3 ISO designation: WCMT06T304-RM4 WSM20S Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: RM4 Form: Trigon 80° Material suitability: S / M Suitable for rostfreier Stahl FAQ What materials is this insert suitable for? The WCMT06T304-RM4 WSM20S insert is suitable for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), where the Tiger·tec Silver grade supports secure chip formation. What does the RM4 chipbreaker do? The RM4 chipbreaker on this insert promotes controlled chip segmentation and reliable evacuation during turning operations, improving surface quality and reducing chip‑related interruptions. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WSM20S grade increases wear resistance and thermal tolerance, resulting in longer life and steadier performance when machining demanding alloys. Is the Trigon 80° form recommended for interrupted cuts? Yes, the Trigon 80° geometry provides robust cutting edges and, together with the T3 thickness, offers improved resistance to shock and intermittent cutting forces in many turning applications. What are the key geometry values to note for holder setup? Important values include the 7° clearance angle and the 0.4 mm corner radius; these influence contact conditions and should be matched with a suitable toolholder for optimal stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT06T304-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, reliable chip control and the Tiger‑tec Gold coating for consistently productive machining of Stahl. Order the insert directly via Metav Werkzeuge or request further selection advice from our consultants. WCMT06T304-RP4 WPP20G turning insert — Trigon 80° geometry, Tiger‑tec Gold (Walter Tools) The WCMT06T304-RP4 WPP20G is an indexable turning and boring insert in Trigon 80° form designed for robust Stahl machining, offering a Tiger‑tec Gold coating and an RP4 chipbreaker for reliable performance in industrial turning applications. Tiger‑tec Gold coating for extended life Trigon 80° geometry for stable cutting RP4 chipbreaker for consistent chip control Suitable for Stahl (ISO P) machining Predictable productivity through optimised coating and grade The Tiger‑tec Gold series and the WPP20G grade combine a multilayer coating with a wear‑resistant substrate to deliver predictable tool life in a broad range of Stahl applications. This combination reduces flank wear and maintains a stable cutting edge over longer cycles, which translates into fewer indexings and improved uptime. The result is measurable efficiency gains: higher part counts per insert and steadier surface finishes during serial production, supporting leaner process planning and lower tooling cost per component. Reliable chip control and edge security for smooth turning The RP4 chipbreaker and the Trigon 80° form were developed to ensure controlled chip formation on typical Stahl grades. With a 0.4 mm corner radius and a 7° clearance angle, the insert balances edge strength and finishing capability, enabling both medium‑depth roughing and precision finishing passes. Consistent chip evacuation reduces the risk of built‑up edge and improves surface integrity, which helps maintain component tolerances and reduces rework rates. Easy integration and secure mounting for production environments The insert’s designation and thickness T3 match common toolholder systems, allowing straightforward retrofitting into existing tool assemblies. The 06 size and tolerance class M provide repeatable seat location and clamping stability, supporting fast changeovers and predictable vibration behaviour. Together with the coated carbide grade, this makes the insert suitable for a wide set of turning and boring tasks where process reliability and repeatability are essential. Contact Metav Werkzeuge for tailored recommendations on toolholders and application settings — Metav Werkzeuge provides expert guidance and quick technical responses to ensure optimal integration into the production process. Technical data SKU: WCMT06T304-RP4-WPP20G-WALTER Designation: WCMT06T304-RP4 WPP20G Product type: Turning / boring indexable insert Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Plate thickness: T3 Plate size: 06 Geometry: Trigon 80° Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: RP4 Application group: Stahl (ISO P) Execution: T (top/insert form Trigon) Stable cutting edge for general turning and boring FAQ What materials is this insert suitable for? The WCMT06T304-RP4 WPP20G insert is specified for Stahl (ISO P) machining and performs across unalloyed and alloyed Stahl grades. Which coating and grade are used on the insert? The insert uses the Tiger‑tec Gold coating in the WPP20G grade, offering improved wear resistance and process stability on Stahl. How does the RP4 chipbreaker benefit production? The RP4 chipbreaker provides consistent chip control, reducing entanglement and improving surface finish when using the WCMT06T304-RP4 WPP20G in turning operations. Is the geometry suitable for both roughing and finishing? Yes, the Trigon 80° geometry with a 0.4 mm corner radius offers a compromise between edge strength for roughing and stability for light finishing passes. What tolerance and mounting accuracy can be expected? The M tolerance class and standard 06 size ensure reproducible seating and clamping accuracy for reliable repeatability in series production. Protected trademarks and brand names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WCMT06T308-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver thermal resistance, a precise Trigon 80° geometry and the E47 chipbreaker for reliable chip control and extended tool life; order the insert directly via Metav Werkzeuge or request expert application advice from our consultants. WCMT06T308-E47 WSM20S indexable insert – Trigon 80°, 7° clearance | Walter Tools WCMT06T308-E47 WSM20S is an indexable insert engineered for drilling and boring applications in demanding materials such as stainless steels and heat‑resistant superalloys Tiger·tec Silver coating for thermal stability Optimised E47 chipbreaker for secure chip flow Trigon 80° form with 0.8 mm corner radius Suitable for stainless steel and superalloys Consistent edge life in high‑heat machining The insert combines the WSM20S coated carbide grade with Tiger·tec Silver technology to deliver improved resistance against thermal loading and flank wear. This results in more stable cutting edges when machining tough alloys, which reduces unscheduled tool changes and increases productive cutting time. Coated carbide here means a ceramic or PVD/CVD finish applied to a hard substrate to slow wear and protect the cutting edge; the practical benefit is a longer useful life and fewer interruptions to the machining cycle. Geometry designed to secure process reliability The Trigon 80° plate form, paired with a 0.8 mm corner radius and 7° clearance, optimises contact conditions at the tool‑workpiece interface. The E47 chipbreaker is engineered for consistent chip formation and evacuation, lowering the risk of built‑up edge and improving surface finish. In practice, that means more predictable cycle times and reduced scrap rates, particularly in interrupted cuts and atypical chip‑producing profiles. Suited for demanding materials and varied operations Marked for ISO groups M and S, the insert is specified for stainless steels and heat‑resistant superalloys or titanium respectively. For these materials, heat generation and poor thermal conductivity are typical challenges; the WSM20S grade addresses them by combining hardness with thermal protection. The result is reliable chip control and repeatable performance in drilling and boring tasks where material behaviour can otherwise cause rapid edge degradation. Compatibility, handling and economic benefit The plate is produced to tolerance class M and the standard size designation ensures compatibility with common drilling/boring cutter bodies. The thickness T3 and the size 06 give a robust seating and minimise deformation under load. Using this insert typically leads to reduced tooling costs per component through longer life and fewer tool swaps, thereby improving overall machining economy without compromising surface quality or dimensional control. The combination of geometry and coating therefore supports higher uptime and predictable output. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to discuss availability and compatibility with existing tool holders Technical Data Article number: WCMT06T308-E47-WSM20S-WALTER SKU: WCMT06T308-E47-WSM20S-WALTER Manufacturer: Walter Tools Product type: Indexable insert (drilling/boring) Core specifications Shape: Trigon 80° Clearance angle: 7° Corner radius: 0.8 mm Size: 06 Thickness: T3 Tolerance class: M Design & special features Grade: WSM20S (coated carbide) Coating / technology: Tiger·tec Silver Chipbreaker: E47 Execution: T Applicable material groups: S / M (superalloys/titanium and stainless steels) ISO designation: WCMT06T308-E47 WSM20S FAQ What materials is this insert designed for? The WCMT06T308-E47 WSM20S insert is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys or titanium depending on machining conditions. How does the Tiger·tec Silver technology benefit drilling and boring operations? Tiger·tec Silver provides enhanced thermal resistance and wear protection for the coated carbide base, which in the WCMT06T308-E47 WSM20S leads to more stable cutting edges and longer tool life under high temperatures. What role does the E47 chipbreaker play in performance? The E47 chipbreaker controls chip formation and evacuation to prevent clogging and built‑up edge; on the WCMT06T308-E47 WSM20S this supports consistent surface finish and reduces the risk of interrupted‑cut failures. Is the insert compatible with standard cutter bodies? Yes, the insert is produced to common tolerances (class M) and size designation 06 with thickness T3, ensuring compatibility with matching indexable drill and boring bodies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanation only; there is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of Walter Tools.
WCMT06T308-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of thermal stability, secure chip control and a robust cutting geometry for reliable machining of stainless steel and heat‑resistant alloys; order the inserts directly via Metav Werkzeuge or ask the consultants for tailored cutting data. WCMT06T308-FM4 WSM20S — Trigon 80° Turning and Boring Insert, Tiger‑tec Silver (Walter Tools) A WCMT06T308-FM4 WSM20S trigon insert designed for turning and boring applications, optimised for stainless steel and high‑temperature alloys. Tiger‑tec Silver coating for thermal stability WSM20S grade for stainless steel and superalloys Trigon 80° form with 0.8 mm corner radius FM4 chipbreaker for consistent chip control Greater process stability through optimized coating and grade The Tiger‑tec Silver coating combined with the WSM20S coated‑carbide grade improves thermal resistance and edge life when machining demanding materials. This engineered surface treatment reduces adhesion and softening at the cutting edge, which leads to fewer edge‑related interruptions and a more consistent machining cycle. For workshops handling stainless steel and heat‑resistant alloys, this means longer tool wearing intervals and reduced operator interventions, supporting a steady production flow and predictable tool‑change planning. Geometry that delivers reliable cutting performance The insert’s Trigon 80° geometry and 0.8 mm radius provide a compromise between strength and accessibility: the larger approach angle increases insert strength for interrupted cuts, while the corner radius supports a robust cutting edge for stable finish passes. A 7° clearance angle and T3 thickness ensure correct seat engagement and stiffness in common toolholders. The FM4 chipbreaker was developed to produce controlled chip forms across a range of depths of cut, which helps to maintain coolant effectiveness and minimises the risk of chip entanglement, reducing rework and down‑time. Application advantages and recommended use This insert is intended for machining stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where heat generation and edge wear are critical. The insert’s combination of coating and geometry supports both roughing operations—where chip control and edge security are essential—and finishing passes that require good surface quality. For best results, pair the insert with a compatible indexable insert holder designed for trigon inserts and apply cutting parameters adapted to the workpiece alloy and rigidity of the machine; the result is improved productivity and consistent component quality with fewer unexpected interruptions. The WCMT06T308-FM4 WSM20S insert thus contributes to reproducible process outcomes in serial production. Contact Metav Werkzeuge for personalised cutting‑data recommendations or to procure Walter Tools WCMT06T308-FM4 WSM20S inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and delivery options Technical Data SKU: WCMT06T308-FM4-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte WCMT06T308-FM4 WSM20S Walter Tools Type: Turning and boring indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Facts Free angle / clearance: 7° Corner radius: 0.8 mm Insert size: 06 Thickness: T3 ISO designation: WCMT06T308-FM4 WSM20S Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM4 Shape: Trigon 80° Material suitability: S / M — heat‑resistant superalloys, titanium (S); stainless steel (M) Intended use: Turning and boring of demanding materials FAQ What materials is this insert suitable for? The WCMT06T308-FM4 WSM20S insert is formulated for stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where thermal stability and edge strength are required. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker produces a controlled chip form that improves chip evacuation and coolant access, supporting continuous operation and reducing the risk of chip‑related interruptions when using the insert. What advantage does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances thermal resistance and reduces built‑up edge, which extends tool life and maintains cutting performance on abrasive or adhesive materials when using this Walter Tools insert. Can the Trigon 80° form be used for both roughing and finishing? Yes, the Trigon 80° geometry combined with a 0.8 mm corner radius offers the strength needed for roughing and the edge stability required for medium finishing operations with this turning and boring insert. Is this insert compatible with standard trigon toolholders? The insert’s Trigon 80° form and ISO designation WCMT06T308-FM4 WSM20S align with standard indexable insert holders designed for trigon inserts; correct seating and clamping according to the holder manufacturer’s instructions are recommended. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are used for explanation only and do not imply any connection between Metav Werkzeuge and the brand owner. The offered item is an original, brand‑new product from the manufacturer (Walter Tools).
WCMT06T308-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the FP4 chipbreaker and a robust trigon geometry, this insert delivers high productivity and consistent surface quality when machining steel; purchase directly via Metav Werkzeuge or request specialist advice for process integration. WCMT06T308-FP4 WPP20G turning indexable insert — Tiger·tec Gold, for steel machining, Walter Tools WCMT06T308-FP4 WPP20G is a versatile turning and drilling/reaming indexable insert designed for reliable steel machining in demanding production environments Tiger·tec Gold coating for extended tool life FP4 chipbreaker for stable chip control Trigon 80° form for secure cutting engagement 0.8 mm corner radius for robust cutting edge Increased throughput through a performance grade The WPP20G grade, realised in the Tiger·tec Gold coating, is engineered for productive machining of steel (ISO P). This combination prioritises wear resistance and consistent cutting behaviour under the thermal loads typical of steel turning and drilling operations. The result is a measurable increase in cutting time between index changes and a reduction in unplanned tool interventions, which supports predictable cycle times and improved overall equipment effectiveness. Engineers seeking efficiency gains will find the geometry and grade tailored for repeatable component quality. Stable cutting and controlled chip formation for safer cycles A defined FP4 chipbreaker paired with the Trigon 80° form provides secure cutting engagement and dependable chip control. The 0.8 mm corner radius and a 7° relief angle balance edge strength with cutting performance, making the insert tolerant to interrupted cuts and machining variations. These geometry choices reduce vibration and help maintain surface finish without sacrificing lifetime, so individual operations benefit from both precision and robustness. Practical compatibility and handling for workshop use The insert is available in size 06 with a T3 thickness and the nominal ISO designation WCMT06T308-FP4 WPP20G, making it straightforward to specify and stock. Its design suits turning operations and certain drilling/reaming applications where an indexable insert solution is required for steel workpieces. Backed by the manufacturing competence of Walter Tools, the grade supports a broad range of steel types and cutting conditions, reducing the need for multiple grades in mixed-production environments. For further process optimisation, Metav Werkzeuge offers application guidance and cutting-data recommendations to match machine and workholding configurations. Discuss Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge for tailored process solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WCMT06T308-FP4-WPP20G-WALTER ISO designation: WCMT06T308-FP4 WPP20G Manufacturer: Walter Tools Product type: Drill/bore and turning indexable insert Series: Tiger-tec Gold Facts Insert size: 06 Thickness: T3 Corner radius: 0.8 mm Relief angle: 7° Shape: Trigon 80° Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: FP4 Material application: steel (ISO P) Execution: T FAQ Which materials is this insert suitable for? The WCMT06T308-FP4 WPP20G insert is designed primarily for steel applications (ISO P) and performs well across common unalloyed and alloyed steels. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, extending usable tool life and supporting consistent surface finish in steel turning. What are the key geometry specifications to note? Key specifications include the Trigon 80° form, 0.8 mm corner radius, 7° relief angle and T3 thickness, which together deliver edge strength and stable cutting behaviour. Can this insert handle interrupted cuts or roughing tasks? Yes, the combination of the FP4 chipbreaker and the robust corner radius makes the insert tolerant to interrupted cuts and suitable for heavier engagement where secure edge strength is required. How is the insert designated for ordering and specification? Order or specify the insert by its ISO designation WCMT06T308-FP4 WPP20G; this identifies the geometry, chipbreaker and grade for correct procurement. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools (Walter AG) is one of the leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik group. Brand names and trademarks are the property of their respective owners and are used for descriptive purposes only. The offered item is an original, factory-new product of the stated manufacturer.
WCMT06T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust MM4 chipformer, and the Trigon 80° geometry to enable secure machining of stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. WCMT06T308-MM4 WSM20S Trigon 80° turning insert — Tiger·tec Silver, 0.8 mm corner radius (Walter Tools) A WCMT06T308-MM4 WSM20S indexable turning insert engineered for heavy-duty machining of stainless steel and high-temperature alloys in demanding production environments Tiger·tec Silver coating performance Optimised MM4 chipformer for stability Trigon 80° geometry for versatile cutting Suited to stainless steel and superalloys Reliable cutting performance for difficult materials The combination of the WSM20S grade and the Tiger·tec Silver coating provides enhanced wear resistance and thermal stability, specifically designed for machining stainless steel and heat-resistant superalloys. The insert’s coating technology reduces flank wear and supports consistent cutting-edge life under elevated temperatures. By choosing this indexable insert, workshops gain predictable tool life and reduced changeover frequency, which contributes to higher overall productivity on difficult-to-machine components. Secure chip control and edge stability during turning Equipped with the MM4 chipformer and a 0.8 mm radius, the geometry promotes reliable chip formation even when cutting materials that tend to work-harden or form long, stringy chips. This results in fewer interruptions and more consistent surface finishes. The Trigon 80° form gives favourable cutting edge exposure for both finishing and light machining, while the T3 thickness supports rigidity at higher cutting forces. Clear chip evacuation lowers the risk of built-up edge and extends the effective life of the cutting edge. Designed to support reproducible, shop-floor results The insert’s tolerance class M and standard ISO designation ensure compatibility with common toolholders and predictable positional repeatability during index changes. The robust design aims to reduce variability between tool changes and operators, making it suitable for serial production where consistency is required. This practical reliability encourages shorter set-up times and contributes to a smoother production flow when machining parts in stainless steel or titanium-containing alloys. Practical benefits for process planning and procurement Because the grade is targeted at both stainless steel (M) and superalloys/titanium (S), tool selection becomes more straightforward for mixed-material production runs. Planners can rely on one insert geometry and coating system for a wider material range, simplifying stock keeping. The insert’s measured characteristics — such as 0.8 mm corner radius, 7° relief angle, and Trigon 80° form — support engineering calculations for cutting data and help to estimate tool life under specific feed and speed regimes. Contact Metav Werkzeuge for tailored cutting data or to order the Walter Tools WCMT06T308-MM4 WSM20S directly — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: WCMT06T308-MM4-WSM20S-WALTER Designation: WCMT06T308-MM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Chipformer: MM4 Facts Corner radius: 0.8 mm Relief angle: 7° Plate form: Trigon 80° Plate size: 06 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Material suitability: S / M Applications: stainless steel (M), superalloys and titanium (S) Intended use: Turning / boring indexable insert FAQ What materials is this insert suitable for? The WCMT06T308-MM4 WSM20S from Walter Tools is designed primarily for stainless steel (M) and high-temperature alloys/titanium (S), offering stable cutting under elevated heat conditions. What are the key geometry and coating features? The insert features a Trigon 80° form, a 0.8 mm corner radius and a 7° relief angle, combined with the Tiger·tec Silver coating to improve wear resistance and thermal stability. How does the MM4 chipformer affect machining? The MM4 chipformer promotes predictable chip breaking and evacuation, reducing the risk of built-up edge and improving surface finish when machining tough or work-hardening materials. Is this insert compatible with standard ISO toolholders? Yes, the insert follows standard ISO designation for WCMT style indexable inserts and is compatible with matching turning toolholders designed for that insert geometry. What production benefits can be expected from using this grade? Using the WSM20S grade reduces tool changes and supports consistent edge life on stainless steel and superalloys, leading to improved process stability and reduced downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WCMT06T308-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and the WPP20G grade’s reliability for consistent steel turning results; order through Metav Werkzeuge or request application advice from our consultants. WCMT06T308-MP4 / WCMT06T308-MP4 WPP20G / WPP20G Turning Insert (Trigon 80°) by Walter Tools — Tiger‑tec Gold for Steel WCMT06T308-MP4 WPP20G is a trigon-shaped indexable insert designed for robust turning and boring in steel, combining a high-performance coated substrate with a controlled chipflow geometry. Tiger·tec Gold coating for wear resistance Trigon 80° geometry for robust turning WPP20G grade optimised for steel MP4 chipbreaker for reliable chip control Precision and productivity for heavy-duty steel turning The WCMT06T308-MP4 WPP20G insert pairs a coated cemented-carbide substrate with a Tiger‑tec Gold surface to extend tool life under the thermal and mechanical loads typical of steel machining. The WPP20G grade is formulated for balanced wear resistance and toughness, helping to maintain a stable cutting edge across prolonged cycles. With a Trigon 80° shape and a corner radius of 0.8 mm, the insert provides stiffness and edge strength for interrupted cuts or heavy pass conditions. These characteristics translate into fewer tool changes, predictable component quality and an improved cost-per-part ratio in production environments that prioritise throughput and reproducibility. Controlled chip formation and consistent surface finish Chip control is achieved through the MP4 chipbreaker, which is optimised for regular chip segmentation when machining a wide range of steels. The combination of geometry and breaker reduces the risk of long, entangling chips and supports continuous operation, especially in automated or lights-out processes. The 7° clearance assists in reducing friction at the flank face, lowering built-up edge tendencies and contributing to a cleaner surface finish on turned components. For process planners, this means a reduction in secondary operations and improved consistency when machining both unalloyed and alloyed steels. Application guidance and integration into workflows The insert’s design and coating make it suitable for general-purpose turning of steels under ISO P classifications; it performs well in medium to heavy cutting conditions while remaining versatile for finishing passes when required. The T3 plate thickness and tolerance class M support repeatable seating in standard toolholders, ensuring interchangeability and simple logistics for toolrooms. As part of Walter Tools’ product family, this insert benefits from proven production standards and quality control, offering suppliers and manufacturers a pragmatic choice when balancing productivity, edge life and operational reliability. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: WCMT06T308-MP4-WPP20G-WALTER Article: WCMT06T308-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Product type: Turning / Boring insert Plate form: Trigon 80° Data Clearance angle: 7° Corner radius: 0.8 mm Plate size: 06 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: MP4 Substrate type: coated cemented carbide Material application: Steel (ISO P) Geometry: trigon 80° for robust cutting FAQ What materials is this insert suited for? The WCMT06T308-MP4 WPP20G insert is designed primarily for machining steel (ISO P), with the WPP20G grade balancing wear resistance and toughness for common steel applications. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating improves wear resistance and thermal stability, helping the insert sustain cutting performance for longer tool life and more consistent dimensional results. Which chipbreaker is integrated and why is it important? This insert features the MP4 chipbreaker, which controls chip formation for predictable evacuation and reduced risk of entanglement, aiding continuous machining and safer operations. Can the insert handle interrupted cuts? Yes — the Trigon 80° geometry combined with a corner radius of 0.8 mm provides edge strength suitable for interrupted cuts and heavy engagement, increasing reliability in challenging conditions. Is this insert compatible with standard toolholders? The plate thickness T3 and tolerance class M support compatibility with many standard turning toolholders that accept the WCMT form, enabling straightforward integration into existing tooling systems. Walter Tools — Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
WCMT06T308-RK4 WKK20S RK4 Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating, optimised chip control and robust Trigon geometry to achieve consistent results when machining cast iron; Order the WCMT06T308-RK4 WKK20S directly via Metav Werkzeuge or ask our consultants if needed. WCMT06T308-RK4 WKK20S — Trigon 80° Turning/Boring Insert, Tiger·tec Silver (Walter Tools) The WCMT06T308-RK4 WKK20S is a trigon indexable insert engineered for precision boring and turning in cast iron applications, combining a coated cemented carbide grade with a purpose-built chipbreaker for short, manageable swarf. Tiger·tec Silver coating for longer life Optimised for cast iron machining Trigon 80° geometry for stability 0.8 mm corner radius for durable edges High-efficiency machining of cast iron components The Tiger·tec Silver grade delivers a balance between wear resistance and toughness, which translates into longer tool life and fewer insert changes during production. Designed specifically for machining cast iron, the grade and coating address the abrasive wear and the often short, breaking chips typical of these materials. By relying on a coated cemented carbide grade, process planners can expect improved consistency in batch production and reduced downtime related to tooling, supporting a more economical machining cycle. Geometry that improves process stability and surface quality The Trigon 80° form and the 7° relief angle create a stable cutting geometry that resists chatter and allows secure clamping in toolholders for boring and turning operations. The 0.8 mm corner radius supports a stronger cutting edge that tolerates intermittent cuts and interrupted surfaces often encountered in cast components. Together with the RK4 chipbreaker, this geometry promotes optimised chip control, reducing the risk of recutting and helping to maintain surface integrity on the workpiece. Practical selection and application advantages Specifying the WKK20S grade within the Tiger·tec Silver family means a grade tuned to the demands of cast iron: abrasion-resistant yet not overly brittle. The RK4 chipbreaker is configured for the typical segmentation of cast iron swarf, making it easier to handle chips and maintain coolant flow. For manufacturing lines seeking repeatable performance, the combination of a robust grade, targeted chipbreaker and Trigon form supports process reliability and predictable tool-change intervals, which in turn facilitates planning for productivity and cost-efficiency. For application guidance or to request a recommendation for specific cast iron operations with Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical support Technical data Article number: WCMT06T308-RK4-WKK20S-WALTER Designation: WCMT06T308-RK4 WKK20S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 06 Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated cemented carbide) Chipbreaker: RK4 Geometry: Trigon 80° Application: Cast iron (K) FAQ What materials is this insert designed for? The WCMT06T308-RK4 WKK20S is intended primarily for cast iron machining and is optimised for the abrasive wear and chip forms common to that material group. How does the RK4 chipbreaker affect performance? The RK4 chipbreaker is designed to produce short, breaking chips in cast iron, improving chip evacuation and reducing the risk of recutting in interrupted or unstable cuts. What are the key geometry features to consider when selecting a toolholder? Select a toolholder that supports Trigon 80° inserts and secures the insert firmly to exploit the 7° relief angle and 0.8 mm corner radius for process stability and improved surface quality. Is the WKK20S grade part of a larger product family? Yes, the grade belongs to the Tiger·tec Silver series, offering a coated cemented carbide solution aimed at balancing wear resistance and toughness for cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for clarification only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer (Walter Tools).
WCMT06T308-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, reliable edge strength and precise chip control to secure consistent performance when machining stainless steels and heat‑resistant superalloys. Order Walter Tools Tiger·tec Silver inserts directly through Metav Werkzeuge or contact our technical consultants for application advice. WCMT06T308-RM4 WSM20S — Trigon 80° indexable insert for stainless steels & superalloys (Walter Tools) WCMT06T308-RM4 WSM20S is a coated carbide indexable insert designed for demanding turning and boring tasks in corrosion‑resistant and heat‑resistant alloys Tiger·tec Silver coating technology WSM20S grade for stainless and superalloys Trigon 80° form with 0.8 mm corner radius 7° clearance angle and RM4 chipbreaker High thermal resistance and dependable cutting grade for tough materials The insert uses the Tiger·tec Silver coating system paired with the WSM20S grade, a coated carbide formulation engineered for materials classified under ISO groups M and S. This combination increases heat resistance and supports stable chip formation, which reduces the risk of build‑up on the cutting edge when turning stainless steels or superalloys. In practice, the coating lowers friction and extends tool life, while the substrate maintains edge stability under elevated temperatures, helping to keep cycle times predictable in production environments. Geometry that improves chip control and surface quality A Trigon 80° insert shape with a 0.8 mm corner radius provides a robust cutting edge for interrupted cuts and heavier engagement, while the RM4 chipbreaker has been designed to break and evacuate chips reliably during medium to heavy roughing. The modest 7° clearance angle balances cutting forces and flank contact to minimise rubbing and heat transfer to the workpiece. Together, these geometric features translate into fewer tool changes, more consistent surface finishes and reduced secondary operations for many turning applications. Integration into process and measurable benefits on the shop floor As an indexable insert with the designation WCMT06T308‑RM4 WSM20S, the component fits standard toolholders for trigon‑style inserts, enabling rapid index changes and straightforward management of tool stocks. For manufacturers processing corrosion‑resistant alloys or nickel‑based superalloys, the insert delivers repeatable performance, improved process stability and predictable wear patterns. The design supports both roughing and semi‑finishing passes; by reducing edge damage and promoting controlled chip flow, it helps to lower scrap rates and increase overall throughput on mixed‑material production runs. For tailored recommendations on integrating Walter Tools Tiger·tec Silver WSM20S inserts into production and for immediate availability, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants provide application‑specific guidance and delivery options Technical Data SKU: WCMT06T308-RM4-WSM20S-WALTER Designation: WCMT06T308-RM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Plate form: Trigon 80° Plate size: 06 Corner radius: 0.8 mm Clearance (relief) angle: 7° Thickness: T3 Special features Chipbreaker: RM4 Material suitability: S / M (superalloys, stainless steels) Tolerance class: M Execution: T Coated carbide cutting grade FAQ What materials is this insert best suited for? The WCMT06T308‑RM4 WSM20S is intended for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S); the Tiger·tec Silver coating and WSM20S substrate are tuned for these groups. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver reduces friction and improves heat resistance, which helps the WSM20S grade maintain a stable cutting edge and consistent chip formation when machining demanding alloys. What role does the RM4 chipbreaker play? The RM4 chipbreaker aids controlled chip segmentation and evacuation during medium to heavy cuts, enhancing process reliability and reducing the likelihood of chip entanglement. Is the insert suitable for interrupted cuts or heavy engagement? Yes; the Trigon 80° geometry and 0.8 mm corner radius provide a robust edge that tolerates interrupted cuts and heavier cutting parameters while preserving edge life. Can the insert be used in standard turning toolholders? The WCMT format is compatible with holders designed for trigon inserts, allowing quick indexing and simple inventory management in typical turning tool systems. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners; brand names and registered trademarks are used solely for explanatory purposes and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
WCMT06T308-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant Tiger·tec Silver grade and a stabilising RM4 chipbreaker for reliable machining of stainless steels and superalloys; order the WCMT06T308-RM4 WSM30S insert directly via Metav Werkzeuge or consult the technical advisors if required. WCMT06T308-RM4 WSM30S — Trigon 80° turning insert with Tiger·tec Silver coating by Walter Tools A WCMT06T308-RM4 WSM30S trigon turning insert engineered for heavy-duty machining of stainless steels and heat-resistant superalloys Tiger·tec Silver coated carbide grade Optimised RM4 chipbreaker for stable chips Trigon 80° form with 7° clearance Suitable for stainless steel and superalloys Consistent performance on stainless steels and superalloys The WSM30S grade, part of the Tiger·tec Silver family, is a coated carbide solution designed to cope with the thermal and mechanical stresses of machining stainless steels (ISO group M) and superalloys (ISO group S). The substrate and multilayer coating improve hot hardness and oxidation resistance, which translates into longer edge life and fewer unscheduled tool changes. For operations where material adhesion and thermal loading threaten surface integrity, this grade supports reliable chip formation and reduces the tendency to build up material on the cutting edge. Geometry that improves chip control and surface finish A carefully selected geometry—Trigon 80° with a 7° clearance and a 0.8 mm corner radius—works together with the RM4 chipbreaker to deliver controlled chip segmentation and smooth evacuation. This combination reduces the risk of stringy chips and built-up edge, helping to maintain a consistent cutting zone and better surface quality. The defined corner radius balances robustness with the ability to produce repeatable part geometry, making the insert suitable for both roughing and semi-finishing passes depending on toolpath strategy. Robust form for secure clamping and repeatability The insert’s T3 thickness and size 06 footprint provide a stable contact area in standard indexable toolholders, improving vibration damping and repeating positional accuracy under load. The trigon form offers three usable cutting edges, which supports economical indexability and predictable replacement cycles. In production contexts where cycle time and consistent tolerances matter, the geometric stability reduces scrap rates and contributes to higher first-pass yield. Process security, lifetime and economical machining Using a Tiger·tec Silver coated indexable insert reduces the frequency of interventions and tool changes, which feeds directly into higher productivity and lower unit costs over long production runs. The RM4 chipbreaker and the coating’s heat-resistant properties support dependable performance on challenging alloys, while the trigon geometry keeps tooling inventory compact. Backed by the reputation of Walter Tools, the insert offers a dependable balance of tool life, process stability and surface quality—advantages that streamline machining schedules and improve overall operational efficiency. For applications requiring secure machining of rostfreiem Stahl and high-temperature alloys, contact Metav Werkzeuge for tailored advice or to order the WCMT06T308-RM4 WSM30S insert via e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: WCMT06T308-RM4-WSM30S-WALTER Designation: WCMT06T308-RM4 WSM30S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger·tec Silver Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Trigon 80° Plate size: 06 Plate thickness: T3 Tolerance class: M Special features Coating / grade: Tiger·tec Silver Substrate: coated carbide Chipbreaker: RM4 Material suitability: stainless steels (M), superalloys and titanium (S) Application focus: heavy-duty machining and stainless steel depending on geometry Brand: Walter Tools FAQ Is this insert suitable for machining stainless steels? Yes. The WCMT06T308-RM4 WSM30S is specified for ISO group M materials and the Tiger·tec Silver grade supports secure chip formation when machining stainless steels. Can the insert handle heat-resistant superalloys and titanium alloys? Yes. The grade and coating of the WCMT06T308-RM4 WSM30S are designed for ISO group S materials, offering thermal stability and edge strength for such alloys. What does the RM4 chipbreaker provide in practical terms? The RM4 chipbreaker promotes controlled chip segmentation, improving evacuation and reducing built-up edge; this helps maintain consistent surface finish and longer edge life for the WCMT06T308-RM4 insert. How does the Trigon 80° form affect machining strategy? The Trigon 80° geometry offers a favourable approach angle for general turning, giving a balance between cutting strength and accessibility; combined with the 7° clearance and 0.8 mm corner radius it supports both robust roughing and reliable semi-finishing. Which toolholders are compatible with this insert size and thickness? Holders designed for size 06 trigon inserts with a T3 seating will accept the WCMT06T308-RM4 WSM30S; verify clamping specifications and seat fit to ensure correct indexing and stability. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The item offered is an original, factory-new product of Walter Tools.
WCMT06T308-RP4 WPP20G RP4 Wendeplatten - Walter Tools
Take advantage of a coated carbide grade from the Tiger·tec Gold family and the proven RP4 chipbreaker to achieve reliable chip control and consistent surface finish in steel turning operations; order directly via Metav Werkzeuge or contact their consultants for application support. WCMT06T308-RP4 WPP20G — Trigon 80° turning/boring insert for steel | Walter Tools A WCMT06T308-RP4 WPP20G insert engineered for medium-duty turning and boring in steel, combining Tiger·tec Gold coating and Trigon 80° geometry for robust edge stability. Tiger·tec Gold coated grade WPP20G Trigon 80° geometry for stable cutting RP4 chipbreaker for reliable chip control 0.8 mm corner radius, 7° clearance angle Improved material removal with consistent tool life The coated carbide composition of the Tiger·tec Gold grade offers improved wear resistance and predictable performance when machining steel. The combination of a hard, wear-resistant coating and a tough carbide substrate reduces flank wear and supports higher cutting parameters, which translates into shorter cycle times and fewer insert changes. For general-purpose turning and light boring, this solution balances abrasive and adhesive wear resistance to preserve edge geometry and surface finish. Geometry and chip control that reduce downtime The Trigon 80° shape and RP4 chipbreaker are designed to produce short, consistent chips in typical steel grades, lowering the risk of entanglement and improving machine uptime. The modest 0.8 mm corner radius and 7° clearance angle help absorb intermittent cutting forces while maintaining dimensional stability, especially in interrupted cuts. In practice, these design choices simplify process setup and reduce the need for secondary operations due to chatter marks or poor surface quality. Process reliability and cost-efficiency for production shops Tolerance class M and the insert’s robust construction contribute to high process stability, enabling repeatable part quality across batches. Fewer tool changes and predictable tool life reduce overall downtime and tooling consumption, improving cost per part. The combination of Tiger·tec Gold coating and the RP4 chip geometry supports a wide range of steel grades, making the insert a versatile choice for job shops and production environments seeking a reliable, economical cutting solution. For tailored technical advice on Walter Tools WCMT06T308-RP4 WPP20G inserts and suitability for specific steel grades, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt consultation. Technical Data Article number: WCMT06T308-RP4-WPP20G-WALTER Name / designation: WCMT06T308-RP4 WPP20G Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series / grade: Tiger-tec Gold, WPP20G Chipbreaker: RP4 Geometry: Trigon 80° Thickness designation: T3 Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 06 Tolerance class: M Special features Coated carbide (Tiger·tec Gold) Designed for steel machining (ISO group P) Balanced wear resistance and toughness Suitable for turning and boring applications FAQ What materials is this insert suitable for? The WCMT06T308-RP4 WPP20G insert is specified for machining steel (ISO group P); the Tiger·tec Gold grade is balanced for common unalloyed and alloyed steels. How does the RP4 chipbreaker affect cutting performance? The RP4 chipbreaker promotes short, controllable chips in steel machining, which improves surface finish and reduces the risk of chip-related interruptions when using the WCMT06T308-RP4 insert. What advantages does the Trigon 80° shape offer? Trigon 80° geometry provides good edge strength and stability for transverse cutting forces, helping to maintain dimensional accuracy in turning and light boring operations with the WPP20G grade. Is the insert suitable for interrupted cuts? Yes; the 0.8 mm corner radius together with the 7° clearance angle gives enhanced robustness and shock resistance for intermittent cutting conditions with this Walter Tools insert. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany; part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
WCMT06T308-RP4 WPP30G RP4 Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a robust Trigon 80° geometry for reliable steel machining and extended tool life; order directly via Metav Werkzeuge or consult the team for application advice. WCMT06T308-RP4 WPP30G – Trigon 80° indexable insert, Tiger·tec Gold, 0.8 mm radius (Walter Tools) The WCMT06T308-RP4 WPP30G is a Trigon 80° indexable insert engineered for demanding steel turning and boring tasks, offering balanced wear resistance and toughness through the Tiger·tec Gold coated carbide grade. Tiger·tec Gold coated carbide grade WPP30G Trigon 80° geometry for increased insert strength RP4 chipbreaker for consistent chip control Designed for steel machining (ISO P group) Higher productivity through a balanced coated grade The combination of the Tiger·tec Gold coating with the selected carbide composition provides a robust balance between wear resistance and toughness, making the insert particularly effective for the thermal and mechanical demands of machining steels (ISO P). This balance reduces unexpected flank wear and supports longer effective cutting times, which in turn improves process reliability and reduces downtime. The coated grade is engineered to maintain cutting performance across a range of cutting conditions typical in medium-to-heavy turning and boring operations. Enhanced stability from Trigon geometry and corner radius The Trigon 80° shape and the 0.8 mm corner radius deliver mechanical stability and resistance to edge chipping, especially in applications with interrupted cuts or variable depths of cut. The geometry spreads cutting forces over a larger area and the 7° clearance angle helps to moderate cutting action while maintaining tool life. The insert thickness (T3) contributes to rigidity in clamping systems, translating to consistent component tolerances and fewer rework cycles in series production. Reliable chip control and improved surface finish The RP4 chipbreaker is tailored to produce short, controllable chips when machining steels, improving evacuation and reducing the risk of chip entanglement in turning and drilling operations. Controlled chip formation supports a consistent surface finish and lowers the incidence of built-up edge, which can otherwise deteriorate dimensional accuracy. For workshops seeking predictable results, this chip control design helps stabilise the process and simplify downstream handling. Application guidance for efficient use and economy Designed primarily for steel machining, the insert is suitable for both turning and bore-related cutting tasks where a robust insert is required. Its balanced properties make it a good choice for mixed production environments where both productivity and tool life matter. For optimal results, match the insert to appropriate holders and cutting parameters recommended for ISO P materials and ensure secure clamping to exploit the Trigon geometry and coated grade fully. If additional technical data or specific cutting recommendations are required, technical consultation is available to adapt the insert to the intended machining scenario. For Tiger·tec Gold performance and reliable steel machining, contact Metav Werkzeuge for expert advice or to place an order — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data SKU: WCMT06T308-RP4-WPP30G-WALTER Designation: WCMT06T308-RP4 WPP30G Series: Tiger-tec Gold Manufacturer: Walter Tools Product type: Drill/bore and turning indexable insert Facts Geometry: Trigon 80° Corner radius: 0.8 mm Clearance (free) angle: 7° Chipbreaker: RP4 Plate size: 06 Thickness: T3 Grade: WPP30G Tolerance class: M Execution: T Special features Coating technology: Tiger·tec Gold Material application: Steel (ISO P group) Carbide-based coated grade Suitable for turning and bore-related operations Focus on process reliability and tool life Brand: Walter Tools FAQ What materials is this insert suitable for? The WCMT06T308-RP4 WPP30G insert is optimised for steel applications and referenced to the ISO P material group for turning and boring operations. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker provides controlled chip formation for steels, improving chip evacuation, supporting a consistent surface finish and reducing built-up edge during machining with Walter Tools indexable inserts. What benefits does the Trigon 80° geometry offer? The Trigon 80° shape increases insert strength and resistance to edge chipping, which is advantageous in interrupted cuts and applications demanding mechanical robustness. Is this insert suitable for heavy-duty turning? Yes, the combination of the coated carbide grade and a 0.8 mm corner radius offers the resilience needed for medium-to-heavy cuts when used with appropriate holders and parameters. What is the full designation and manufacturer of the insert? The product is listed as WCMT06T308-RP4 WPP30G and is supplied by Walter Tools as a coated carbide indexable insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, brand-new product from Walter Tools.
WCMT080404-FP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, the Tiger‑tec Gold coated grade WPP20G, and a geometry optimised for steel machining to increase process stability and tool life; order via Metav Werkzeuge or contact the consultancy team for application advice. WCMT080404-FP4 WPP20G Trigon 80° turning insert — Tiger‑tec Gold, for steel The WCMT080404-FP4 WPP20G is a trigon 80° indexable insert engineered for turning and bore-finishing applications in steel, featuring the FP4 chipbreaker and a secure cutting-edge geometry for consistent performance. WCMT080404-FP4 WPP20G — Tiger‑tec Gold coating Trigon 80° insert for robust turning FP4 chipbreaker for controlled chip formation 0.4 mm corner radius and 7° relief angle Consistent cutting performance from advanced coating technology The combination of Tiger‑tec Gold and the WPP20G grade delivers a balance between wear resistance and toughness that suits a wide range of steel grades. The coating reduces flank wear under the thermal and mechanical loads typical of steel machining, which translates into predictable tool life and fewer unexpected tool changes. For production environments this means fewer interruptions to the machining cycle and improved component repeatability without sacrificing cutting-edge integrity. Geometry that improves chip control and surface finish A trigon 80° form with an integrated FP4 chipbreaker ensures reliable chip formation and evacuation when turning steels. The 0.4 mm corner radius provides a compromise between edge strength and surface quality, while the 7° relief angle supports stable cutting action under moderate to heavy depths of cut. These geometric choices reduce the risk of built-up edge and contribute directly to a cleaner surface finish and consistent dimensional accuracy. Designed for efficient, economic machining in steel Optimised for ISO P materials, the insert supports high process stability across unalloyed and alloyed steels. The coated cemented carbide grade combines abrasion resistance with sufficient toughness to cope with typical formation of chips in steel turning, which helps to lower tooling costs per component. Using a standardised insert format like this size simplifies tool management and indexing, contributing to quicker regrinds or replacements and less machine downtime. Practical application notes and compatibility The insert is supplied in the WCMT080404-FP4 configuration and suits a broad range of standard toolholders designed for trigon 80° inserts. The FP4 chipformer is effective for continuous to moderately interrupted cuts in steel and is particularly useful where consistent chip control is required for automated or semi-automated production. For mixed-shop environments the grade’s universality for steel machining allows straightforward integration into existing tool programmes without extensive parameter revalidation. For application guidance or to discuss Walter Tools inserts for steel machining, contact Metav Werkzeuge for tailored advice and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WCMT080404-FP4-WPP20G-WALTER Product designation: WCMT080404-FP4 ISO designation: WCMT080404-FP4 WPP20G Manufacturer: Walter Tools Facts Insert size: 08 Insert thickness: 04 Relief angle: 7° Corner radius: 0.4 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated cemented carbide) Chipbreaker: FP4 Form: Trigon 80° Application: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The WCMT080404-FP4 WPP20G is formulated principally for steel (ISO P), including unalloyed and alloyed steels; the WPP20G grade and Tiger‑tec Gold coating are selected to manage heat and chip formation typical of these materials. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating on the WPP20G grade improves abrasion resistance while maintaining edge toughness, resulting in longer, more predictable tool life and stable performance during steel turning operations. What advantages does the FP4 chipbreaker provide? The FP4 chipbreaker produces controlled, short chips under typical steel-cutting conditions, aiding chip evacuation and reducing the likelihood of entanglement, which supports safer and more reliable high-volume machining. Is the trigon 80° form suitable for finishing and medium turning? The trigon 80° geometry with a 0.4 mm corner radius and 7° relief angle offers a good balance between edge strength and surface quality, making it suitable for medium turning and many finishing tasks in steel. Can this insert be used with standard toolholders? Yes; the WCMT080404-FP4 format matches common toolholders for trigon 80° inserts, enabling straightforward integration into existing turning tool setups. What should be expected regarding tool life consistency? With correct mounting and appropriate cutting parameters for steel, the WPP20G grade with Tiger‑tec Gold coating delivers consistent wear behaviour and repeatable edge performance, supporting predictable production cycles. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
WCMT080404-RK4 WKK20S RK4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKK20S grade for reliable wear resistance and stable chip formation in cast iron turning; the RK4 chipbreaker and Trigon 80° geometry support consistent productivity and predictable tool life. Order the WCMT080404-RK4 WKK20S directly via Metav Werkzeuge or consult our advisers for application guidance. WCMT080404-RK4 WKK20S — Trigon 80° turning insert for cast iron by Walter Tools WCMT080404-RK4 WKK20S is a Trigon 80° indexable turning insert engineered for machining cast iron in general turning applications. Tiger‑tec Silver coating for increased wear resistance Grade WKK20S optimised for cast iron machining RK4 chipbreaker for stable chip control Trigon 80° form with 0.4 mm corner radius Enhanced wear protection for abrasive cast‑iron work The combination of the Tiger‑tec Silver coating with the WKK20S carbide grade delivers a robust solution for the abrasive nature of cast iron. The coating reduces flank wear under interrupted cuts and short, breaking chip regimes typical of grey and nodular castings, which leads to more predictable tool life and reduced production stops. That results in a lower cost per finished component and fewer tool changes, supporting continuous operation in series production. Geometry and chip control that improve process security The Trigon 80° insert form and RK4 chipbreaker are matched to produce compact, controlled chips when turning cast iron, improving evacuation in both manual and automated setups. The 0.4 mm corner radius balances edge strength and surface finish, while the 7° clearance angle maintains cutting engagement without excessive rubbing. Together these features ensure stable machining, reproducible results and a reduced scrap rate, which is particularly important when machining complex cast parts or facing variable material batches. Integration into the workshop for efficient tool management Specification codes and standard format make the insert straightforward to integrate into existing tool holders and inventory systems. The standard WCMT080404-RK4 designation simplifies reordering and ensures compatibility with many established clamping systems. Using a dedicated grade optimised for cast iron helps planners and buyers forecast tool consumption more precisely and supports leaner stock levels. The result is improved shop-floor uptime and easier process planning across shift patterns. Contact Metav Werkzeuge for tailored cutting‑parameter advice and to secure the WCMT080404-RK4 WKK20S inserts for cast‑iron turning; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: WCMT080404-RK4-WKK20S-WALTER SKU: WCMT080404-RK4-WKK20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Designation: WCMT080404-RK4 WKK20S Brand: Walter Tools Dimensions & measurable data Plate form: Trigon 80° Size: 08 Thickness: 04 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Special features & applications Series: Tiger‑tec Silver Grade: WKK20S Chipbreaker: RK4 Material application: suitable for cast iron (K) Execution: T FAQ Is this insert suitable for cast iron machining? Yes. The WCMT080404-RK4 WKK20S from Walter Tools is specifically graded (WKK20S) and coated (Tiger‑tec Silver) for machining cast iron and handling its abrasive wear characteristics. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WCMT080404-RK4 WKK20S improves wear resistance and reduces flank wear, extending tool life in interrupted cuts and abrasive cast‑iron conditions. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker is designed to form compact chips and improve evacuation when turning cast iron, contributing to process security and a consistent surface finish with the Trigon 80° geometry. What does the 0.4 mm corner radius mean for my parts? A 0.4 mm corner radius offers a compromise between edge durability and surface quality; with the WCMT080404-RK4 WKK20S it supports stronger edges while maintaining acceptable finish on cast‑iron components. Can the insert be used in standard toolholders? The WCMT080404-RK4 code follows common insert standards and is compatible with many standard turning insert clamping systems; check holder specifications to confirm fit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. The offered article is an original, factory‑new product of Walter Tools. There is no connection between our company and the brands mentioned.
WCMT080404-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP20G grade for consistent tool life and reliable chip control; benefit from the sturdy Trigon 80° geometry and the RP4 chipbreaker for stable, repeatable metalcutting. Order directly via Metav Werkzeuge or ask the consultants for tailored application advice. WCMT080404-RP4 WPP20G turning/boring indexable insert — Trigon 80°, RP4 chipbreaker — Walter Tools The WCMT080404-RP4 WPP20G is an indexable insert engineered for productive turning and light boring of Stahl, combining a hardened, coated carbide grade with a robust trigon form for reliable workshop performance. Tiger·tec Gold coating for robust edge life WPP20G grade for versatile Stahl machining Trigon 80° form for stable cutting geometry RP4 chipbreaker for controlled chip formation Durable coating and material selection that reduces downtime The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance between wear resistance and toughness tailored for the demands of machining Stahl. The coated carbide substrate improves resistance to flank wear and thermal loading, which translates into longer in‑service life and fewer insert changes. For production settings where cycle time and tool-change intervals matter, this composition supports higher productivity and predictable performance. The insert’s specification addresses the common challenges of heat generation and chip formation when machining unalloyed and alloyed steels, providing a technically sound basis for reliable process control. Geometry engineered for stability and consistent surface quality The Trigon 80° shape, combined with a 0.4 mm corner radius and a 7° clearance, creates a rigid cutting geometry that resists deflection under load while still allowing effective engagement in general turning and light boring operations. This geometry is particularly useful where strength at the cutting edge is required without compromising the ability to generate a good surface finish. The RP4 chipbreaker is designed to promote tight, controllable chips when machining typical steel grades, reducing the risk of long, tangled swarf and improving operator safety and downstream handling. As a result, the insert supports stable cutting parameters and consistent part quality across batches. Practical benefits for workshop efficiency and tool planning Adopting this indexable insert brings immediate operational advantages: predictable wear allows for easier tool life planning, the insert’s universal grade simplifies inventory by covering a broad range of Stahl applications, and the Trigon form provides a balance between roughing strength and finishing capability. The insert’s coded dimensions and chipbreaker allow straightforward selection of compatible toolholders and clamping systems in CNC turning setups. If supplementary data is required for process planning—such as recommended speeds, feeds or compatible toolholder types—Metav Werkzeuge’s technical team can provide application-specific recommendations to match the machining task and material. For reliable production with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised advice and quick availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: WCMT080404-RP4-WPP20G-WALTER ISO designation: WCMT080404-RP4 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Core technical data Insert shape: Trigon 80° Size: 08 Thickness code: 04 Corner radius: 0.4 mm Clearance angle: 7° Design & special features Chipbreaker: RP4 Coating / material: coated carbide Material application: Stahl Tolerance class: M Execution: T FAQ What materials is this insert designed for? The WCMT080404-RP4 WPP20G insert from Walter Tools is designed primarily for machining Stahl, optimised for the heat and chip characteristics typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the Walter Tools insert increases wear resistance and thermal stability, which supports longer tool life and more consistent cutting performance in series production. What does the RP4 chipbreaker achieve in practice? The RP4 chipbreaker promotes controlled chip formation for improved evacuation and safer swarf handling, leading to fewer interruptions and more reliable surface quality during turning operations. Is the Trigon 80° form suitable for both roughing and finishing? Yes; the Trigon 80° geometry provides a robust cutting edge for heavier cuts while the 0.4 mm corner radius and balanced geometry allow acceptable finishes, making the insert versatile across a range of turning tasks. Which designation should be quoted when ordering or specifying toolholders? Use the ISO designation WCMT080404-RP4 WPP20G or the SKU WCMT080404-RP4-WPP20G-WALTER together with the chipbreaker and grade information to ensure compatible toolholder selection. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer Walter Tools.
WCMT080408-FP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, FP4 chip control and a stable Trigon geometry for reliable steel machining; order inserts via Metav Werkzeuge or contact our consultants for application advice. WCMT080408-FP4 WPP20G Turning and boring indexable insert by Walter Tools — Tiger‑tec Gold coating, FP4 chipbreaker The WCMT080408-FP4 WPP20G is a Tiger‑tec Gold coated indexable insert engineered for robust turning and boring of steel components, offering consistent chip control and extended tool life. Tiger‑tec Gold coating for high wear resistance Suitable for steel (ISO P) machining Trigon 80° form for stable cutting geometry 0.8 mm corner radius for smooth chip control High, predictable performance for steel turning The Tiger‑tec Gold coating together with the WPP20G grade delivers a balance of wear resistance and toughness that suits the thermal and mechanical demands of steel machining (ISO P). The coated carbide substrate is designed to resist abrasive wear while maintaining a stable cutting edge throughout the tool life. As a result, production runs exhibit fewer tool changes and more consistent dimensional results. The FP4 chipbreaker actively shapes chips to improve evacuation and reduce the risk of entanglement, which supports uninterrupted, efficient turning operations. Stable geometry that improves process reliability The Trigon 80° plate form and tolerance class M provide a rigid cutting geometry that reduces vibration and improves surface finish in turning and boring applications. The moderate 7° clearance angle contributes to predictable cutting forces and a safer engagement with the workpiece, while the 0.8 mm corner radius offers a blend of strength and edge definition for medium-duty finishing and semi-finishing passes. These geometric choices translate into repeatable component tolerances and fewer scrap parts, which is particularly valuable in batch production and long-cycle machining. Practical benefits and application advice for workshop use Supplied as the designation WCMT080408-FP4 WPP20G, this insert is intended for use in standard turning toolholders compatible with Trigon‑style inserts. The grade’s versatility across the P group means it performs well on a wide range of unalloyed and alloyed steels, and the coated surface reduces edge chipping during interrupted cuts. For optimised results, pair the insert with appropriate cutting data that reflects the material, depth of cut and required surface quality; the combination of FP4 chip control and Tiger‑tec Gold coating helps to extend machining windows and lower overall tooling cost per component. For tailored cutting data, compatibility checks or to procure WCMT080408-FP4 WPP20G inserts from Walter Tools, contact Metav Werkzeuge for personalised application support and short delivery times Technical data Article number: WCMT080408-FP4-WPP20G-WALTER Product: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Designation: WCMT080408-FP4 WPP20G Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Trigon 80° Plate size code: 08 Plate thickness code: 04 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: FP4 Execution: T Material suitability: Steel (ISO P) Coating: Tiger‑tec Gold (coated carbide) FAQ What materials is this insert best suited for? This insert is specified for the ISO P group; the WCMT080408-FP4 WPP20G is optimised for machining unalloyed and alloyed steel grades. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker shapes and splits chips for secure evacuation, reducing fume and tangling risks and improving surface consistency during turning. What advantage does the Trigon 80° form provide? The Trigon 80° geometry increases cutting edge stability and reduces vibration, which enhances surface finish and repeatability in turning operations. Can this insert handle interrupted cuts? The Tiger‑tec Gold coating and WPP20G grade combine wear resistance and toughness, making the insert resilient under moderate interruption, though cutting data should be adjusted accordingly. Is the corner radius suitable for finishing? A 0.8 mm corner radius offers a compromise between edge strength and finish quality, suitable for semi-finishing and light finishing passes on steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com