WNMA080408-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WKK10S grade for highly productive cast-iron turning; the RK5 chipbreaker and Trigon 80° geometry provide stable cutting and reliable chip control. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMA080408-RK5 WKK10S indexable turning insert — Trigon 80°, RK5 chipbreaker by Walter Tools The WNMA080408-RK5 WKK10S is an indexable turning insert designed for machining cast iron, combining a Trigon 80° shape with a 0.8 mm corner radius for robust edge strength and repeatable results Tiger·tec Silver coating for wear resistance Optimised for cast iron machining Trigon 80° geometry for stable cutting 0.8 mm corner radius for precise edge Consistent machining performance through advanced coating technology The Tiger·tec Silver coating together with the WKK10S grade is engineered for the abrasive wear typical of cast iron. This pairing improves resistance to flank and crater wear, which extends effective tool life and reduces frequency of indexable-insert changes. As a result, cycle times remain stable over longer production runs and tool-change downtime is reduced, supporting a more continuous manufacturing flow. Geometry and chip control that stabilise turning operations The Trigon 80° form with the RK5 chipbreaker is designed to deliver consistent chip formation when machining brittle cast-iron microstructures. The 0.8 mm corner radius increases edge robustness, while the 0° (negative) relief aids in interrupted and heavy-duty cuts by providing a stronger cutting edge. These geometrical features lead to improved surface finish and lower risk of edge chipping under fluctuating loads. Reliable grade and execution for predictable tool life The WKK10S coated carbide grade offers a balance between wear resistance and toughness suitable for the ISO group K. The insert’s execution A and tolerance class M ensure dimensional stability and interchangeability in production environments, contributing to process reliability. Using a grade tuned for cast iron lowers scrap rates and supports consistent workpiece tolerances across batches. Practical integration into production and machining planning As an indexable insert, this product fits standard toolholders matching the WNMA geometry and allows fast index changes to restore cutting performance. Its focus on cast-iron applications means selection of cutting data should favour chip breakage and moderate cutting speeds appropriate for the workpiece grade. For straightforward implementation, confirm holder compatibility and check recommended machining parameters from production datasheets before machining. Contact Metav Werkzeuge for availability and application advice on the Walter Tools WNMA080408-RK5 WKK10S insert by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: WNMA080408-RK5-WKK10S-WALTER Designation: WNMA080408-RK5 WKK10S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Insert size: 08 Thickness: 04 Corner radius: 0.8 mm Relief/free angle: 0° (negative) Special features Chipbreaker: RK5 Coating: Tiger·tec Silver Grade: WKK10S Shape: Trigon 80° Material suitability: Cast iron (ISO group K) Execution: A Tolerance class: M FAQ Which materials is this insert intended for? The WNMA080408-RK5 WKK10S insert is optimised for machining cast iron, matching ISO material group K with a coated carbide grade tuned to abrasive wear characteristics. What coating and grade does the insert use? The insert features the Tiger·tec Silver coating and the WKK10S grade, combining improved wear resistance with toughness for long tool life in cast-iron turning. What are the key geometry features and their benefits? The Trigon 80° shape with the RK5 chipbreaker and a 0.8 mm corner radius provides stable cutting, reliable chip control and a robust cutting edge suited to interrupted cuts. Is the insert suitable for heavy or interrupted cuts? Yes; the negative 0° relief and the reinforced corner radius make the insert resilient under heavier loads and intermittent cutting conditions. How does the grade affect productivity? The WKK10S grade is designed to reduce wear-related downtime and maintain consistent cutting behaviour, supporting continuous production and predictable insert life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
WNMA080408-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of a robust cutting solution that combines the Tiger‑tec Silver coating and the RK5 chipbreaker for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. WNMA080408-RK5 WKK20S turning insert — Tiger‑tec Silver, RK5 chipbreaker, for cast iron machining — Walter Tools The WNMA080408-RK5 WKK20S is a Trigon 80° turning insert optimised for productive machining of cast iron components, offering robust edge stability for demanding turning operations Trigon 80° geometry for heavy cutting Tiger‑tec Silver coated carbide for wear resistance RK5 chipbreaker for controlled chip formation Optimised for cast iron machining Consistent chip control increases process reliability The combination of the RK5 chipbreaker and the Tiger‑tec Silver cutting material delivers reliable chip formation, reducing interruptions in production and lowering secondary operations. The chip geometry has been engineered for abrasive cast iron workpieces, where frequent short, breaking chips are typical; this results in fewer built‑up edge incidents and more predictable removal rates. In practical terms, the improved chip behaviour supports longer, unattended runs and contributes to a steady uptime in batch production. Geometry and edge strength for secure heavy turning The Trigon 80° shape with a 0° negative rake and a 0.8 mm corner radius provides a robust cutting edge suited to higher feed rates and interrupted cuts. A negative rake means the insert presents a stronger, more shock‑resistant edge to the workpiece, which is particularly beneficial when machining harder or more brittle cast iron grades. The trigon form also enables versatile tool‑holder positioning, permitting stable engagement and predictable surface finish under increased cutting forces. Coating and substrate tuned for abrasive cast iron The grade WKK20S is a coated carbide made using the Tiger‑tec Silver technology, combining a hard, wear‑resistant surface with a tough substrate to handle the abrasiveness of many cast irons. Coatings reduce flank wear and thermal softening at the cutting edge; in combination with the substrate’s toughness this yields a balance between wear resistance and fracture avoidance. For users less familiar with coating terminology: a coated carbide features a thin, engineered layer that protects the carbide body while maintaining sharpness and adhesion under heavy loads. Production advantages and suitable applications Thanks to its design and material pairing, this insert is primarily intended for cast iron turning where high process stability and repeatable results are required. The geometry and chip control reduce the need for manual intervention, while the coated grade increases tool life, lowering tooling costs over time. If assistance is required to match insert geometry and grade to a specific machine, Metav Werkzeuge provides technical guidance and can advise on ideal feed, speed ranges and tool‑holder choices for a given casting grade. For robust, repeatable cast iron turning with Walter Tools' Tiger‑tec Silver grade, contact Metav Werkzeuge for tailored recommendations and rapid supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: WNMA080408-RK5-WKK20S-WALTER SKU / designation: WNMA080408-RK5 WKK20S Manufacturer: Walter Tools Product type: turning insert (indexable turning insert) Core data Plate form / included angle: Trigon 80° Free (rake) angle: 0° (negative) Corner radius: 0.8 mm Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Grade: WKK20S (coated carbide, Tiger‑tec Silver series) Chipbreaker: RK5 Suitable material group: cast iron (K) Designation without grade: WNMA080408-RK5 FAQ What materials is this insert designed for? The WNMA080408-RK5 WKK20S insert is formulated for cast iron machining and is optimised for abrasive, short‑chip behaviour typical of these materials. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker promotes controlled, short chip formation on cast iron, improving process security and reducing the risk of chip entanglement during turning operations. What benefits does the Tiger‑tec Silver grade provide? The Tiger‑tec Silver coating on the WKK20S grade offers enhanced wear resistance and thermal stability, extending tool life and maintaining consistent surface quality in serial production. Is the Trigon 80° form suitable for interrupted cuts? Yes, the Trigon 80° geometry combined with a 0° negative rake and a 0.8 mm corner radius delivers robust edge strength, making the insert well suited to interrupted cuts and heavier feed applications. Can Metav Werkzeuge advise on cutting parameters? Technical advice on feeds, speeds and tool‑holder selection is available from Metav Werkzeuge to ensure optimal performance of the WNMA080408-RK5 WKK20S in specific applications. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Trademarks and registered names are used for information only and do not imply any affiliation with our company. The item offered is an original, factory‑new product from the manufacturer.
WNMA080408-RK7 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK10S grade together with the RK7 chipbreaker to achieve reliable, repeatable cast‑iron turning and secure edge life; order directly via Metav Werkzeuge or contact our consultants for machining data and application advice. WNMA080408-RK7 WKK10S turning indexable insert — Tiger·tec Silver, for cast iron The WNMA080408-RK7 WKK10S is a Trigon 80° turning insert engineered for machining cast iron with a Tiger·tec Silver coated, wear‑resistant grade and an RK7 chipbreaker for short, controlled chips Tiger·tec Silver coated grade WKK10S Optimised for cast iron (group K) Trigon 80° form with 0.8 mm corner radius RK7 chipbreaker for short, broken chips Consistent performance on cast iron for predictable production The combination of the WKK10S grade and the Tiger·tec Silver coating is designed specifically for abrasive wear and the frequently fragmented chips typical of cast iron. This results in improved tool life and more stable process windows when turning nodular or grey cast materials. The RK7 chipbreaker produces short, controllable chips that reduce the risk of entanglement and make chip evacuation easier in enclosed toolholders, helping to maintain uptime and protect downstream components. Robust geometry for stable cutting and edge security The Trigon 80° form with a 0.8 mm corner radius and a 0° (negative) rake angle delivers mechanical strength at the cutting edge. Negative rake geometry increases cutting edge support, which is beneficial in interrupted cuts or when machining tough inclusions in cast iron. The triangular platform also allows three indexing positions per insert, reducing tooling change frequency and supporting continuous production runs with minimal setup time. Predictability and efficiency for machining processes The ISO designation and tolerance class aid in tool‑holder selection and repeatability; the insert’s standardised form simplifies inventory and process planning. The coated carbide grade is tuned for abrasive resistance, which translates into fewer insert changes and lower overall manufacturing costs. For process engineers, this means easier calculation of tool life and simpler scheduling of maintenance intervals — a rational improvement in workflow and cost control. Practical recommendations for application and setup Use this insert where short chips and stable edges are required in cast‑iron turning. The RK7 chipbreaker is particularly suitable for medium to heavy depth cuts where chip control is critical. When setting cutting parameters, begin with conservative speeds and increase feed to exploit the insert’s abrasive resistance; consult Metav Werkzeuge for recommended cutting data tailored to specific cast‑iron grades and machine rigour. The insert is intended for standard ISO toolholders that accept Trigon‑form inserts; no on‑site demonstration is offered. Contact Metav Werkzeuge for tailored cutting data and to specify Walter Tools' WNMA080408-RK7 WKK10S insert for efficient cast‑iron turning. Technical Data Article number: WNMA080408-RK7-WKK10S-WALTER Label: Drehwendeschneidplatte WNMA080408-RK7 WKK10S Walter Tools Product type: Turning indexable insert Series: Tiger·tec Silver Grade: WKK10S Manufacturer: Walter Tools Core specifications Shape: Trigon 80° Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Free cutting angle: 0° (negative) Chipbreaker: RK7 Tolerance class: M Special features Coating: Tiger·tec Silver Material application: cast iron (group K) Sort‑specific design for abrasive wear resistance Robust edge support for interrupted cuts Indexable for multiple positions FAQ What materials is this insert designed for? The insert is optimised for machining cast iron (material group K); the WKK10S grade and Tiger·tec Silver coating address abrasive wear typical of these materials. How does the RK7 chipbreaker affect chip control? The RK7 chipbreaker produces short, broken chips ideal for safe evacuation in turning operations and reduces the risk of long, stringy chips in cast‑iron machining. Is the insert suitable for interrupted cuts? Yes. The Trigon 80° geometry combined with a 0° (negative) rake and a 0.8 mm corner radius provides robust edge support for interrupted cutting conditions. How many indexable positions does the insert offer? The triangular form allows multiple indexing positions per insert, reducing changeovers and increasing productive tool life. Where can I get recommended cutting data for specific cast‑iron grades? Metav Werkzeuge can provide tailored cutting parameters and application advice for the WNMA080408-RK7 WKK10S insert depending on the cast‑iron subtype and machine capability. Walter Tools: The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
WNMA080408-RK7 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WKK20S grade and the RK7 chipbreaker delivers reliable wear resistance and consistent chip control for cast iron turning; secure steady tool life and production stability through Metav Werkzeuge or consult our specialists for application advice. WNMA080408-RK7 WKK20S — Trigon 80° indexable turning insert for cast iron by Walter Tools WNMA080408-RK7 WKK20S is an indexable turning insert designed for efficient machining of cast iron, featuring the Tiger·tec Silver coating and an RK7 chipbreaker for stable chip formation. Tiger·tec Silver coated carbide Optimised RK7 chipbreaker for cast iron Trigon 80° form with 0.8 mm corner radius Negative 0° relief for stable cutting Precision for cast iron that improves cycle reliability This insert combines a coated carbide grade engineered for abrasive conditions with a geometry optimised for cast iron. The WKK20S grade within the Tiger·tec Silver family provides a balance of wear resistance and toughness, which translates into fewer interruptions for tool changes and more predictable tool life. The RK7 chipbreaker is shaped to promote short, controlled chips when turning grey and nodular cast irons, reducing the risk of snarling and improving surface consistency. For production environments where downtime and repeatability matter, this geometry supports steady-cycle turning with fewer process variations. Stable cutting performance and easy integration into toolholders The Trigon 80° form gives a robust cutting edge and is suitable for a variety of turning setups where entry angles and clearance are critical. With a 0.8 mm corner radius and a negative 0° relief, the insert offers enhanced edge strength and resistance to shock when encountering interruptions in cast iron. These features help to maintain component tolerances and minimise vibration during finish and semi-finish operations. The insert’s designation and geometry simplify selection for existing toolholders, enabling straightforward replacement and consistent set-ups across multiple machines. Material-focused design that reduces machining risk Designed specifically for the abrasiveness and often brittle chip behaviour of cast iron, the insert’s WKK20S coating and substrate combination reduces flank wear while maintaining cutting stability. The result is improved surface quality with fewer reworks and more predictable tool performance under varied feed and speed conditions. Manufacturing teams benefit from the insert’s balance of process security and longevity, supporting higher productivity and better cost-efficiency per component over extended production runs. Choose the Walter Tools Tiger·tec Silver WKK20S insert for efficient cast iron turning — contact Metav Werkzeuge for technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: WNMA080408-RK7-WKK20S-WALTER SKU: WNMA080408-RK7-WKK20S-WALTER Designation: WNMA080408-RK7 WKK20S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Insert size code: 08 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RK7 Insert form: Trigon 80° Execution/geometry: A Suitable for: Cast iron (ISO group K) FAQ What workpiece materials is this insert designed for? The WNMA080408-RK7 WKK20S insert is designed primarily for cast iron (ISO group K), with the WKK20S grade and Tiger·tec Silver coating optimised to resist abrasive wear typical for these materials. How does the RK7 chipbreaker influence machining of cast iron? The RK7 chipbreaker promotes short, controlled chips when turning cast iron, improving chip evacuation and reducing the likelihood of chip-related interruptions when using the WNMA080408-RK7 WKK20S from Walter Tools. Is the Trigon 80° form suitable for both roughing and finishing? Yes, the Trigon 80° geometry provides a strong cutting edge and, combined with the 0.8 mm corner radius and negative relief, supports both semi-finish and finish passes with stable edge life on cast iron parts. Can the insert be used in standard toolholders for trigon-shaped inserts? The insert follows common trigon indexing dimensions; the WNMA080408-RK7 WKK20S is intended for toolholders that accept Trigon 80° inserts, allowing straightforward integration into existing turning tool systems. What benefits does the Tiger·tec Silver coating offer in production runs? The Tiger·tec Silver coating on the WKK20S grade enhances wear resistance and heat management during cutting, which helps extend tool life and maintain surface quality across longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
WNMA080412-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of high wear resistance and optimised chip control for consistent productivity when machining cast iron; the combination of a robust grade and stable geometry reduces downtime and tool changes. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. WNMA080412-RK5 WKK10S indexable turning insert — Trigon 80°, for cast iron (Walter Tools) The WNMA080412-RK5 WKK10S is an indexable turning insert designed for demanding cast-iron applications, combining a coated-carbide grade with a Trigon 80° form for robust, repeatable cutting. Tiger·tec Silver coating for wear resistance Optimised for cast iron (ISO group K) Trigon 80° geometry for stable cutting 1.2 mm corner radius and RK5 chipbreaker Consistent wear resistance for heavy cast-iron work The combination of the Tiger·tec Silver coating and the WKK10S grade delivers coated carbide performance tailored to abrasive cast-iron conditions. The applied coating reduces flank and crater wear during interrupted cuts and under variable cutting conditions, extending component life and reducing the frequency of insert changes. For users unfamiliar with coated-carbide technology: the coating forms a protective barrier on the substrate that reduces chemical and mechanical wear, improving lifetime while maintaining acceptable toughness. This results in a more predictable machining process and fewer unscheduled stops for regrinding or replacement. Geometry and chip control that stabilise the machining process A Trigon 80° shape with 0° (negative) free angle offers a favourable balance between strength and accessibility in turning operations; the format supports secure clamping and effective cutting-edge support. The RK5 chipbreaker is engineered for short, controlled chips typical of cast-iron materials, which improves evacuation and reduces the risk of chip entanglement. The 1.2 mm corner radius increases edge robustness for roughing passes while still permitting acceptable surface finishes where required. These features together enhance process reliability and help to achieve consistent cycle times on serial production runs. Practical integration into production workflows The insert designation WNMA080412-RK5 denotes the standard indexable format and makes the component compatible with a wide range of indexable toolholders, simplifying stocking and tool-change routines. Tolerance class M and the series specification support interchangeability and repeatable positioning in the pocket, minimising setup time. Given the insert’s optimisation for ISO group K, it is particularly suited to foundry work, cylinder blocks, and other cast-iron components where short, brittle chips and abrasive wear are common. For purchasers seeking swift implementation, the robust grade and chipbreaker choice contribute directly to lower tool-related stoppages and steadier output. Contact Metav Werkzeuge for tailored selection advice, compatibility checks and to request a quotation — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data Article number: WNMA080412-RK5-WKK10S-WALTER SKU: WNMA080412-RK5 Brand: Walter Tools Facts Size: 08 Thickness: 04 Corner radius: 1.2 mm Free angle: 0° (negative) Shape: Trigon 80° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: RK5 Suitable for: Cast iron (ISO group K) Execution: A Product type: Indexable turning insert FAQ What materials is this insert optimised for? The insert is optimised for cast iron machining (ISO group K); the WKK10S grade and Tiger·tec Silver coating address abrasive wear and short-chip behaviour common to these materials. How does the RK5 chipbreaker affect performance? The RK5 chipbreaker produces short, controlled chips suited to cast-iron turning, improving chip evacuation and reducing the chance of chip-related interruptions during the cut. Is the Trigon 80° geometry suitable for heavy-duty turning? Yes; the Trigon 80° form with a 1.2 mm corner radius and negative geometry provides strong edge support for robust cutting and interrupted operations. Can the WNMA080412-RK5 be used in standard toolholders? The WNMA080412-RK5 follows common indexable-insert standards and is compatible with toolholders that accept trigon 80° inserts and the specified insert size. What benefits does the Tiger·tec Silver series provide? The Tiger·tec Silver series combines a tailored coating and substrate to improve wear resistance and process stability in abrasive cast-iron applications, helping to extend effective tool life. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, factory-new product from the manufacturer.
WNMA080412-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from a robust combination of Tiger·tec Silver coating and the RK5 chipbreaker tailored for abrasive cast iron. The result is predictable tool life and stable chip formation that supports uninterrupted production. Order the insert directly via Metav Werkzeuge or consult their team for optimum grade selection and process parameters. WNMA080412-RK5 WKK20S — Indexable turning insert, Tiger·tec Silver coating, for cast iron | Walter Tools The WNMA080412-RK5 WKK20S is an indexable trigon insert designed for efficient machining of cast iron components in demanding production environments. Tiger·tec Silver coating for improved wear resistance RK5 chipbreaker optimised for cast iron machining Trigon 80° form with 1.2 mm corner radius Increased process reliability for abrasive cast iron work The combination of the Tiger·tec Silver coating and the WKK20S grade delivers a clear benefit where abrasive wear is the main challenge. The coated carbide substrate provides a hardened contact surface that resists flank and crater wear, which translates into longer in‑service intervals and fewer tool changes. With the RK5 chipformer tuned for cast iron, the insert promotes stable chip formation, reducing the risk of unexpected interruptions and helping to maintain consistent cycle times. Robust geometry for secure cutting and consistent finishes The trigon 80° form and 1.2 mm corner radius offer a balance between edge strength and geometric versatility. The 0° (negative) relief geometry contributes to a more robust cutting edge, which is advantageous under intermittent cut conditions typical of many cast iron components. This geometry supports predictable surface quality and repeatable outcomes in series production, enabling process planners to rely on consistent part tolerances without frequent tool adjustments. Easy specification and integration into production tooling The insert follows the standard ISO designation and a compact size code for straightforward machine compatibility. As a coated carbide indexable insert with the RK5 chipbreaker, it is suitable where short, breaking chips and abrasive wear dominate the machining process. Documentation of grade and series simplifies tool management: recorded as part of the Tiger·tec Silver family and identified by the WNMA080412-RK5 WKK20S label, the component can be aligned with existing holder inventories and tool‑management systems for fast replacement and traceability. Contact Metav Werkzeuge for tailored Walter Tools Tiger·tec Silver insert recommendations and to secure the right WNMA080412-RK5 WKK20S solution for cast iron production Technical Data SKU: WNMA080412-RK5-WKK20S-WALTER Label: Drehwendeschneidplatte WNMA080412-RK5 WKK20S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger-tec Silver Grade: WKK20S Chipbreaker: RK5 Facts Insert form: Trigon 80° Corner radius: 1.2 mm Relief angle: 0° (negative) Size code: 08 Thickness code: 04 Tolerance class: M Execution: A Special features Coated carbide (Tiger·tec Silver) Optimised for cast iron (ISO group K) Designed for abrasive wear and breaking chips Stable chip formation and predictable tool life Robust edge geometry for interrupted cuts FAQ What materials is this insert suitable for? The WNMA080412-RK5 WKK20S is specified for cast iron (ISO group K); the WKK20S grade and Tiger·tec Silver coating are optimised for abrasive cast materials. How does the RK5 chipbreaker affect performance? The RK5 chipbreaker is engineered to produce short, controlled chips in cast iron, improving evacuation and reducing the likelihood of chip entanglement during turning operations. Can this insert be used for stainless steel or aluminium? The insert is formulated for cast iron applications; alternative grades and chipformers should be selected for stainless steel or aluminium to achieve optimal wear behaviour and surface finish. What does the 0° (negative) relief mean in practice? The 0° (negative) relief provides a stronger cutting edge for heavy or interrupted cuts, enhancing edge stability under mechanical stress typical of cast iron machining. How is the geometry identified for tool setup? The trigon 80° form, 1.2 mm corner radius and the ISO-style designation WNMA080412-RK5 give clear indexable insert geometry for correct clamping and toolholder selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, brand-new merchandise from the manufacturer.
WNMA080412-RK7 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and form-stable geometry for reliable cast-iron turning operations; order directly via Metav Werkzeuge or contact our consultants for application support. WNMA080412-RK7 WKK10S – Turning insert, Trigon 80°, for cast iron | Walter Tools The WNMA080412-RK7 WKK10S is a Trigon 80° turning insert engineered for efficient machining of cast iron, featuring a coated carbide grade from the Tiger·tec Silver series that balances wear resistance and toughness. Tiger·tec Silver coating for enhanced wear resistance Designed for abrasive cast iron machining (ISO K) Trigon 80° form with 1.2 mm corner radius Negative 0° relief and stable chip control RK7 Reliable grade and coating for abrasive cast-iron work The Tiger·tec Silver series supplies a coated carbide grade tailored to the demands of cast iron machining. The WKK10S grade combines surface hardness and a supportive substrate to resist the abrasive wear typical of grey and ductile cast irons, while preserving edge integrity during interrupted cuts. This results in longer usable life of the cutting edge and consistent dimensional accuracy over extended production runs. The insert’s construction reduces the frequency of tool changes, improving cycle-time efficiency and contributing to steady process throughput. Geometry and chip control that improve process stability The insert’s Trigon 80° shape and RK7 chipbreaker are designed to generate short, controlled chips when turning cast iron, lowering the risk of chip entanglement and improving surface finish. The 1.2 mm corner radius supports robust edge strength at moderate depths of cut, while the negative 0° relief provides a stable cutting geometry under heavy interruptions and higher radial loads. Together these features offer a predictable, vibration-resistant behaviour that keeps tolerances consistent and minimises scrap in batch production. Practical benefits for workshop productivity With tolerance class M and a format geared to versatile turning applications, this indexable insert yields measurable productivity gains: fewer insert changes, reduced downtime and consistent component quality. The negative geometry supports higher feed rates where stability is essential, and the Tiger·tec Silver coating helps maintain edge condition across varied cast-iron grades. For production environments that prioritise throughput and repeatability, the insert provides a balance between wear resistance and economical performance. Simple selection and integration into existing toolholders The WNMA-format insert is compatible with standard holders that accept Trigon 80° inserts; selection is simplified by size and designation codes. The plate size and thickness follow familiar conventions, enabling quick matching to existing tool posts and reducing setup time. When combined with appropriate cutting parameters for cast iron—using the RK7 chipbreaker to encourage short chips—operators can expect reliable surface quality and predictable tool life without extensive trial-and-error. For application-specific recommendations, tooling bundles or to discuss compatibility with current setups, contact Metav Werkzeuge for expert guidance and prompt delivery information. Technical data SKU: WNMA080412-RK7-WKK10S-WALTER Label: Drehwendeschneidplatte WNMA080412-RK7 WKK10S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Designation: WNMA080412-RK7 WKK10S Data Corner radius: 1.2 mm Relief angle: 0° (negative) Plate form: Trigon 80° Plate size: 08 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: RK7 Application group: ISO K (cast iron) Geometry: negative Material base: coated hardmetal Suitable for interrupted cuts and abrasive materials FAQ What materials is this insert designed for? The WNMA080412-RK7 WKK10S is optimised for cast iron (ISO K); the WKK10S grade and RK7 chipbreaker address abrasive wear and short, breaking chips typical of these materials. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker on this insert promotes short, controlled chips and improved surface finish when turning cast iron, reducing chip handling issues in the machining zone. Can the insert be used for heavy interrupted cuts? Yes, the negative 0° relief and the 1.2 mm corner radius provide a robust cutting edge that supports heavier radial loads and interrupted cutting conditions. Which holder types accept the Trigon 80° WNMA format? Standard toolholders compatible with Trigon 80° WNMA inserts can be used; check the holder’s seat and clamping specifications to ensure secure fitment for optimal stability. Is the Tiger·tec Silver coating beneficial for mixed production runs? The Tiger·tec Silver coating offers a balance of wear resistance and toughness that performs well across many cast-iron grades, helping to maintain edge life even in variable-production scenarios. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Walter Tools is a brand of Walter AG and forms part of the Sandvik Group. Protected trademarks and registered trade names belong to their respective owners. Walter Tools products described here are original, factory-new items from the manufacturer.
WNMA080412-RK7 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide performance, precise Trigon 80° geometry and reliable RK7 chip control for productive cast‑iron turning; order directly via Metav Werkzeuge or consult our specialists for application support. WNMA080412-RK7 WKK20S Trigon 80° indexable turning insert for cast iron – Walter Tools WNMA080412-RK7 WKK20S is a coated carbide turning insert designed for productive machining of cast iron with RK7 chip control and Tiger‑tec Silver performance. Coated carbide Tiger‑tec Silver Optimised for cast iron (ISO K) Trigon 80° geometry, 1.2 mm corner RK7 chipbreaker for short chips High productivity on abrasive cast‑iron applications The Tiger‑tec Silver grade WKK20S delivers a robust coated carbide substrate optimised for the abrasive wear typical of cast iron (ISO group K). Thanks to the RK7 chipbreaker, chip formation is consistently short and controllable, reducing interruptions and tool‑post cleaning time. This results in improved cycle times and more predictable tool life compared with uncoated grades. For workshops seeking efficient, repeatable turning operations, the blend of coating technology and chip control provides a measurable productivity advantage. Geometry and edge specification that support reliable turning The trigon 80° shape with a 1.2 mm corner radius and 0° negative rake gives a sturdy cutting edge and stable engagement in interrupted or heavy cuts. The insert’s negative relief increases edge strength and resistance to chipping under tough cutting conditions, while the moderate corner radius balances robustness with acceptable surface finish. This geometry is particularly suitable when roughing cast iron components where consistent tool life and low risk of fracturing the insert are priorities. Practical benefits for workshop integration and process stability With a standard tolerance class M and execution A, the insert fits common turning toolholders for trigon inserts, simplifying tool inventory and changeover. The coated carbide composition of the WKK20S grade reduces flank wear and maintains dimensional stability over longer runs, lowering the frequency of tool changes and inspecting downtime. As a result, component throughput and process reliability benefit directly, supporting leaner production schedules and predictable maintenance planning. Applications and material suitability explained Designed specifically for cast iron machining, this insert addresses the typical short, brittle chips and abrasive interaction of grey and nodular cast irons. The WKK20S coating technology improves resistance to the mechanical and thermal stresses encountered in these materials, meaning fewer rejects and steadier surface quality. While targeted at cast iron, the insert’s robust edge and chip control may also be considered for similar, abrasive cast components where short‑chip behaviour is desired. For reliable, application‑specific advice on Walter Tools turning inserts and to request cutting data or test recommendations, contact Metav Werkzeuge for tailored support and availability information. Technical data SKU: WNMA080412-RK7-WKK20S-WALTER Designation: WNMA080412-RK7 WKK20S Product type: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Core dimensions Corner radius: 1.2 mm Plate size: 08 Thickness: 04 Plate form: Trigon 80° Relief angle: 0° (negative) Tolerance class: M Materials and features Grade / coating: WKK20S (Tiger‑tec Silver) Substrate code: K (suitable for cast iron) Chipbreaker: RK7 Series: Tiger‑tec Silver Execution: A Application: Cast iron (ISO group K) FAQ What materials is this insert intended for? This WNMA080412-RK7 WKK20S insert from Walter Tools is designed primarily for machining cast iron (ISO group K), with the WKK20S coating optimised for abrasive, short‑chipping cast materials. How does the RK7 chipbreaker benefit production? The RK7 chipbreaker on the WNMA080412-RK7 WKK20S promotes short, controllable chips, reducing interruptions and improving process stability during cast‑iron turning operations. Which geometry makes this insert suitable for heavy cuts? The Trigon 80° geometry combined with a 0° negative rake and 1.2 mm corner radius gives a strong cutting edge on the Walter Tools insert, making it well suited to interrupted and heavy cutting conditions. Is this insert compatible with standard trigon toolholders? Yes; the WNMA080412-RK7 WKK20S is a trigon 80° indexable insert with execution A and tolerance class M, compatible with common toolholders for trigon inserts. What advantage does the Tiger‑tec Silver technology provide? Tiger‑tec Silver coating on the WKK20S grade enhances wear resistance and thermal stability, extending tool life and maintaining surface quality on abrasive cast‑iron components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMA100612-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a wear-resistant WKK10S grade and the RK5 chipbreaker to ensure productive, repeatable turning of cast iron components; order directly via Metav Werkzeuge or consult the team for application advice. WNMA100612-RK5 WKK10S – Trigon 80° turning insert by Walter Tools (Tiger·tec Silver, for cast iron) The WNMA100612-RK5 WKK10S is a trigon 80° turning insert designed for efficient machining of cast iron components with a coated carbide grade optimised for abrasive wear and short, breaking chips. Tiger·tec Silver coating Optimised for cast iron (ISO K) Trigon 80° geometry Robust RK5 chipbreaker Increased throughput through targeted wear resistance The combination of the Tiger·tec Silver coating and the WKK10S grade delivers higher tool life when machining abrasive grey and nodular cast iron. The advanced coating technology reduces flank wear and extends the productive life of the insert, which leads to fewer tool changes and improved machine uptime. For production environments where cycle time and repeatability matter, this turning insert supports a more economical process by maintaining cutting performance over longer tool intervals. Predictable chip control and surface consistency The RK5 chipbreaker and Trigon 80° geometry were developed for controlled chip formation in interrupted and continuous cutting of cast iron. The controlled chip flow reduces the risk of built-up edge and improves surface finish consistency. Operators with limited experience in insert selection benefit from the stable behaviour of this geometry, since the chipbreaker is tuned to transform brittle cast-iron chips into easily manageable segments, lowering the workload at the machine and on downstream handling. Robust geometry for secure clamping and reproducible results The insert’s corner radius of 1.2 mm and negative 0° clearance are engineered to provide a strong cutting edge and predictable cutting forces, which helps maintain dimensional accuracy across serial production. The trigon shape gives multiple cutting edges per insert, reducing tooling costs per component and enabling quick index changes. Combined with the coated carbide substrate, the design supports reliable performance where abrasive wear is the principal limitation. For tailored advice on integrating Tiger·tec Silver turning inserts into existing processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Walter Tools range and suitable grades for specific cast iron applications. Technical Data SKU: WNMA100612-RK5-WKK10S-WALTER ISO designation: WNMA100612-RK5 WKK10S Series: Tiger·tec Silver Grade: WKK10S Manufacturer: Walter Tools Data Insert shape/angle: Trigon 80° Corner radius: 1.2 mm Clearance: 0° (negative) Insert size: 10 Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: RK5 Applicable material group: K (cast iron) Execution: A Series description: Grade optimised for abrasive wear and short, breaking chips FAQ Is this insert suitable for all types of cast iron? The WNMA100612-RK5 WKK10S insert by Walter Tools is optimised for ISO group K and performs well on common cast-iron grades, offering reliable chip control and wear resistance for typical cast-iron turning operations. Can the insert be used for stainless steel or hardened materials? This insert is designed specifically for cast iron (ISO K). It is not recommended for stainless steel or significantly hardened steels; alternative grades and coatings are available for those applications. How does the RK5 chipbreaker help in interrupted cuts? The RK5 chipbreaker promotes short, manageable chips and stabilises cutting forces, which improves performance in interrupted cuts commonly encountered with cast-iron workpieces when using the WKK10S grade. What advantage does the Trigon 80° shape provide? The trigon 80° form offers multiple cutting edges per insert and a robust edge geometry, supporting economical indexing and consistent results in serial production. Is the WKK10S grade suitable for high-production environments? Yes; the wear-resistant WKK10S grade with Tiger·tec Silver coating is engineered for productivity and stable wear behaviour in cast-iron machining, making it well suited to high-production settings. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
WNMA100612-RK5 WKK20S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating, a robust WKK20S grade and the Trigon 80° geometry delivers stable chip control and extended cutting performance for cast-iron applications; ideal where repeatable results and predictable tool life matter. Order directly via Metav Werkzeuge or consult the team for selection and availability. WNMA100612-RK5 WKK20S indexable turning insert for cast iron machining — Walter Tools The WNMA100612-RK5 WKK20S is an indexable turning insert optimised for abrasive cast-iron work, offering a Trigon 80° format with RK5 chipbreaking and a 0° negative rake for consistent performance in demanding shop-floor conditions. Tiger·tec Silver coating for long tool life Optimised for cast iron machining (ISO K) Trigon 80° geometry for secure clamping 0° negative rake with 1.2 mm corner radius Predictable performance for abrasive cast-iron turning The WKK20S grade, applied within the Tiger·tec Silver series, is formulated specifically for cast-iron machining (ISO K). This coated carbide combination mitigates abrasive wear and copes well with the short, brittle chips typical of grey and nodular cast iron, which helps to maintain dimensional stability over longer cutting cycles. As a result, users benefit from fewer insert changes, more consistent workpiece tolerances and a measurable increase in productive cutting time when compared with unoptimised grades. Reliable chip control and process security The integrated RK5 chipbreaker is engineered to create short, controllable chips when machining cast iron, reducing the risk of chip entanglement and improving surface finish. Combined with the Trigon 80° insert shape, which provides a secure seating and stable clamp engagement, the geometry supports reliable cutting forces and repeatable results. The engineering behind the chipformer and geometry reduces downtime and simplifies process parameter selection for operators with varying experience levels. Robust edge design for consistent edge life A 0° negative rake with a 1.2 mm corner radius produces a durable cutting edge able to withstand the shock loads and abrasive nature of cast-iron cutting. The insert’s tolerance class M supports interchangeability and predictable fitting in standard tool holders, which simplifies tool management and spindle balancing in precision turning operations. Together, these traits enable stable material removal rates and predictable wear patterns that feed directly into improved planning and cost-efficiency on the shop floor. Contact Metav Werkzeuge for tailored advice on Walter Tools turning inserts and guidance on integrating the WNMA100612-RK5 WKK20S into existing tool cycles. Technical data Article number: WNMA100612-RK5-WKK20S-WALTER Name: WNMA100612-RK5 WKK20S Type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Insert size: 10 Thickness designation: 06 Corner radius: 1.2 mm Insert shape: Trigon 80° Rake angle: 0° (negative) Chipbreaker: RK5 Tolerance class: M Materials & features Grade: WKK20S (coated carbide) Coating: Tiger·tec Silver Suitable for: Cast iron (ISO K) Application focus: Turning of abrasive cast-iron materials Designation without grade: WNMA100612-RK5 ISO designation: WNMA100612-RK5 WKK20S FAQ Is this insert suitable for all types of cast iron? The WNMA100612-RK5 WKK20S is optimised for ISO K cast-iron materials and performs best on grey and nodular cast iron where abrasive wear and short chips are typical. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this Walter Tools insert improves wear resistance and thermal stability, extending edge life and helping to maintain consistent cutting performance under heavy-duty cast-iron conditions. Which tool holders are compatible with the Trigon 80° shape? The Trigon 80° format is compatible with holders designed for 80° triangular inserts; secure clamping and correct seating are essential to benefit from the geometry’s stability. How does the RK5 chipbreaker affect machining results? The RK5 chipbreaker produces short, controlled chips in cast iron, improving surface finish and reducing the risk of chip build-up around the cutting zone, which supports uninterrupted production. What should be considered when selecting cutting parameters for this insert? Start with conservative cutting speeds and feeds appropriate for cast iron, then adjust using the insert’s wear behaviour as guidance; the WKK20S grade and Tiger·tec Silver coating allow gradual optimisation for increased material removal rates. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation purposes only; there is no affiliation between our company and the named brands. The offered article is an original, brand-new product from the manufacturer.
WNMA100616-RK5 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, a controlled RK5 chipbreaker and the stable Trigon 80° geometry for reliable cast iron turning; order the WNMA100616-RK5 WKK20S via Metav Werkzeuge or consult the technical advisers for process integration. WNMA100616-RK5 WKK20S — Trigon 80° turning insert with RK5 chipbreaker by Walter Tools WNMA100616-RK5 WKK20S is a Trigon 80° turning insert designed for efficient machining of cast iron components in production and batch turning applications Trigon 80° geometry for stable cutting RK5 chipbreaker for controlled chip formation Tiger‑tec Silver coating for wear resistance Suitable for cast iron machining (ISO group K) Reliable performance for abrasive cast iron work The combination of the WKK20S grade within the Tiger‑tec Silver family and the dedicated RK5 chipbreaker delivers a wear‑resistant cutting edge well suited to the short, often brittle chips typical of cast iron. The coated carbide formulation is optimised to resist abrasive wear and to maintain a consistent edge over longer cycle times, which reduces index changes and tool consumption. In practice, this means fewer interruptions for insert changes and a steadier surface finish across series production, supporting overall process stability and predictable tool cost per part. Geometry that promotes stability and repeatability The Trigon 80° plate form together with a 0° (negative) relief angle provides a geometry that resists edge chipping under interrupted cuts and heavy engagement. A corner radius of 1.6 mm balances edge strength and achievable surface finish, making the insert suitable for medium‑ to heavy‑duty turning operations where rigidity and repeatable dimensions are priorities. These geometric choices translate into improved vibration resistance and a reduced risk of thermal degradation at the cutting edge, both of which contribute to consistent component tolerances in automated turning centres. Designed for productivity and process security Tolerance class M and execution A indicate a production‑grade insert that fits typical clamping systems with consistent repeatability. The coated grade and chipbreaker combination supports higher metal removal rates while preserving edge life, so cycle times can be shortened without sacrificing reproducibility. As a result, the insert aids in achieving a favourable cost‑per‑part calculation in medium‑volume manufacturing, while the standardised geometry simplifies tool management and spare stock planning across machining cells. Practical application notes for material selection This insert is expressly tuned for ISO group K materials; it handles the abrasive nature of grey and nodular cast irons by generating short, breakable chips and by providing a robust edge that tolerates the variable inclusions often found in cast materials. For finishing passes where a finer surface is required, the corner radius and Trigon profile allow controlled cut engagements; for more aggressive roughing, the RK5 chipbreaker maintains chip control and helps avoid chip tangling. The WNMA100616‑RK5 WKK20S complements machining strategies that prioritise throughput and repeatable quality in cast iron components. Contact Metav Werkzeuge for application advice or to request the WNMA100616‑RK5 WKK20S from Walter Tools; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WNMA100616-RK5-WKK20S-WALTER Label: Turning insert WNMA100616-RK5 WKK20S Walter Tools Product type: Turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Facts Geometry: Trigon 80° Relief angle: 0° (negative) Corner radius: 1.6 mm Inscribed circle / size: 10 mm Thickness: 06 Tolerance class: M Execution: A Special features Chipbreaker: RK5 Coating technology: Tiger‑tec Silver Grade composition: Coated carbide (WKK20S) Material application: Suitable for cast iron (ISO group K) Designed for short, brittle chip formation in cast materials FAQ What materials is this insert suitable for? The WNMA100616‑RK5 WKK20S is formulated for ISO group K materials and is especially suitable for machining cast iron, where the Tiger‑tec Silver coating and RK5 chipbreaker manage abrasive wear and chip control. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker on this Trigon insert promotes short, consistent chips and improves process security during interrupted or heavy cuts, reducing the risk of chip tangling and protecting the cutting edge. Can this insert be used for finishing and roughing? Yes; the 1.6 mm corner radius and Trigon 80° geometry provide a compromise between strength for roughing and the ability to achieve a good surface finish in finishing passes when cutting parameters are adjusted. What is the exact product reference for ordering? Order reference: WNMA100616‑RK5 WKK20S (Walter Tools). Use this SKU to ensure the correct grade, chipbreaker and geometry are supplied. Is this grade compatible with high‑speed turning? The WKK20S grade is optimised for cast iron applications and supports productive cutting conditions; recommended cutting parameters should be checked against machine capability and the specific cast material to determine high‑speed suitability. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands beyond the distribution of original, factory‑new products. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG060404-FM5 WMP20G G Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools' durable Tiger·tec Gold grade and the WMP20G cutting technology for reliable stainless steel turning and consistent chip control. The combination of a Trigon 80° form and the FM5 chipbreaker supports stable machining and fewer unplanned interruptions. Order or request application data via Metav Werkzeuge for fast technical advice. WNMG060404-FM5 WMP20G indexable turning insert, Tiger·tec Gold, Walter Tools The WNMG060404-FM5 WMP20G is an indexable turning insert designed for robust machining of stainless steel, offering a Trigon 80° geometry and a specialised FM5 chipbreaker for controlled cutting performance. Tiger·tec Gold coating for long tool life Optimised for stainless steel applications Trigon 80° form with 0.4 mm corner radius FM5 chipbreaker for stable chip control Consistent performance for stainless steel turning The coated grade WMP20G of the Tiger·tec Gold series delivers a balance between wear resistance and edge stability that is particularly effective with stainless steel. Thanks to the coating and substrate combination, this insert reduces the risk of built-up edge and supports a secure chip formation under medium to robust cutting conditions. As an indexable insert, it enables predictable tool life and repeatable surface finishes, which helps to plan tool changes and maintain production flow with fewer interruptions. Improved chip control and surface quality The Trigon 80° geometry combined with the FM5 chipbreaker provides controlled chip segmentation and evacuation, reducing the likelihood of entanglement and improving process reliability. The 0.4 mm corner radius contributes to edge strength and supports stable finishing passes while maintaining dimensional accuracy. These features translate into fewer reworks and more consistent part quality when turning demanding stainless steel grades, delivering direct operational benefits in workshop and production environments. Easy integration into existing tooling systems With the standard WNMG form factor and the Walter Tools Tiger·tec Gold technology, this insert integrates smoothly into common tool holders and turning systems. The WMP20G grade is optimised for the specific challenges of stainless steel, which simplifies grade selection and reduces the need for trial-and-error in process setup. The robust edge behaviour supports predictable machining windows, contributing to lower scrap rates and improved throughput across batch and single-part manufacturing. Practical guidance for application and process planning For new setups or when adapting to tougher stainless grades, focus on stable clamping, appropriate coolant strategy and conservative feed during initial cuts; the combination of Tiger·tec Gold coating and the FM5 chipbreaker helps widen the optimal window. When in doubt about feeds, speeds or holder choice, application data from the manufacturer or supplier can shorten setup time and reduce risk. Technical teams benefit from cutting data that reflect the insert’s intended use in medium to robust conditions and confirm the achievable surface finish and tool life. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger·tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: WNMG060404-FM5-WMP20G-WALTER Designation: WNMG060404-FM5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core technical data Insert shape: Trigon 80° Size designation: 06 Thickness: 04 Corner radius: 0.4 mm Free rake angle: 0° (negative) Chipbreaker: FM5 Tolerance class: M Special features Grade: WMP20G (coated carbide) Suitable for stainless steel Stable edge and consistent performance Optimised for medium to robust cutting conditions FAQ What materials is this insert designed for? The insert is specified for machining stainless steel; the WMP20G grade and Tiger·tec Gold technology are tuned for stainless steel behaviour. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker promotes controlled chip formation and evacuation, improving process reliability and surface quality when using the WNMG060404-FM5 WMP20G insert. What does the Trigon 80° form mean for operations? A Trigon 80° geometry offers a balance of stability and accessibility for a range of turning operations; combined with a 0.4 mm corner radius it supports both robustness and acceptable finishing capability. Is this insert suitable for finishing and semi-finishing? Yes, the combination of the Trigon form and the WMP20G grade allows for stable semi-finishing and finishing passes in stainless steel, provided cutting parameters are set accordingly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are used for explanation only; there is no connection between Metav Werkzeuge and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
WNMG060404-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating, the WSM01 grade optimised for rostfreier Stahl and the FM5 chipbreaker for consistent chip control — a package that raises process reliability and productivity; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. WNMG060404-FM5 WSM01 indexable turning insert — Trigon 80°, FM5 chipbreaker (Walter Tools) The WNMG060404-FM5 WSM01 is an indexable turning insert designed for demanding machining of rostfreier Stahl and heat‑resistant superalloys, combining a Trigon 80° form with a negative 0° relief for robust chip formation and stable cutting. Tiger‑tec Silver coating for heat resistance WSM01 grade for rostfreier Stahl and superalloys Trigon 80° form for strong corner support FM5 chipbreaker for predictable chip control Consistent metal removal and stable cutting for higher throughput The combination of a Trigon 80° geometry and the WSM01 coated grade provides a stable cutting edge that promotes reliable metal removal when machining tough materials. The insert’s geometry gives good support at the cutting edge, reducing the tendency for chatter and enabling higher feed rates without compromising surface finish. In practical terms, this means fewer tool changes and longer uninterrupted cycles on parts made from rostfreier Stahl or nickel‑base alloys, contributing directly to improved shop productivity and lower per‑component tooling cost. Heat resistance and edge stability for difficult materials Developed within the Tiger‑tec Silver series, the coating and substrate pairing emphasise thermal resistance and edge protection. For operations on materials that generate high temperatures at the cutting zone, such as superalloys or workpieces classified in group S, this toughness translates into slower wear progression and a more predictable tool life. The FM5 chipbreaker helps control chip shape and evacuation, reducing the risk of built‑up edge and enabling consistent performance across medium and heavy cuts. Clear specification aids process planning and repeatability With a corner radius of 0.4 mm and a negative relief of 0°, the insert offers a repeatable interaction between tool, workpiece and machine. These measurable parameters simplify process setup and allow precise calculation of effective depth of cut and cutting forces, which benefits CAM programming and cycle time estimations. The insert’s standardised WNMG060404-FM5 WSM01 designation supports easy reordering and tool tracking within production management systems, ensuring a reproducible machining strategy across batches. For tailored application guidance or to check immediate availability of the Walter Tools Tiger‑tec Silver WSM01 inserts, contact Metav Werkzeuge for expert advice and order coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WNMG060404-FM5-WSM01-WALTER Designation: WNMG060404-FM5 WSM01 Product type: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FM5 Core data Insert form: Trigon 80° Insert size: 06 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: M Features Suitable for rostfreier Stahl (ISO group M) Suitable for heat‑resistant superalloys and Titan (ISO group S) Coated cemented carbide grade Robust edge preparation for heavy cuts Execution: G FAQ What materials is this insert suitable for? The WNMG060404-FM5 WSM01 by Walter Tools is suitable for machining rostfreier Stahl and heat‑resistant superalloys, with the WSM01 grade optimised for thermal and edge stability. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker produces controlled chip shapes and eases chip evacuation, which helps maintain a stable cutting process and reduces downtime for chip management when machining difficult alloys. What does the Trigon 80° form provide in practice? A Trigon 80° insert gives enhanced corner support and rigidity, improving resistance to mechanical stresses during interrupted cuts and supporting higher feeds with reliable surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original and factory‑new from the respective manufacturer. Walter Tools is a registered brand.
WNMG060404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance and robust cutting geometry: the Tiger·tec Silver coating and WSM10S grade deliver secure chip control and consistent edge life when machining demanding materials; order the insert directly via Metav Werkzeuge or consult the technical team for application support. WNMG060404-FM5 WSM10S indexable turning insert – Tiger·tec Silver, for stainless steel & superalloys | Walter Tools WNMG060404-FM5 WSM10S is an indexable turning insert designed for demanding turning operations on stainless steels and heat‑resistant superalloys, offering a balance of edge stability and chip control in high‑stress machining. Tiger·tec Silver coated carbide grade WSM10S Trigon 80° insert for robust turning 0.4 mm corner radius for strength 0° negative rake for stability Optimised for stainless steel and superalloys Improved productivity on tough materials The combination of the Tiger·tec Silver coating with the WSM10S carbide grade provides a dependable solution for machining workpiece groups M and S as defined in ISO 513. The coated substrate supports stable chip formation and thermal resistance, which reduces the risk of build‑up on the cutting edge when facing stainless steels and heat‑resistant alloys. This results in longer tool life and fewer interruptions for insert changes, directly improving process throughput and lowering unit costs per component. Geometry tuned for strength and consistency The Trigon 80° form delivers a strong tool shape that resists breakage in interrupted cuts and heavy engagement scenarios. A 0.4 mm corner radius increases edge robustness while the 0° negative rake reinforces the cutting edge for demanding operations; both features favour roughing and semi‑finishing where mechanical stability is essential. The FM5 chipbreaker supports controlled chip evacuation, which helps maintain a consistent surface condition and reduces the likelihood of built‑up edge during continuous turning. Application guidance and process reliability Tolerance class M and the Tiger·tec Silver series are selected to offer process security in serial production. The insert is suitable for conventional turning setups and is especially effective in applications where heat generation and workpiece toughness require a wear‑resistant coating and a stable cutting geometry. Reference to ISO 513 clarifies material group suitability: M for rostfreie Stähle and S for superalloys and titanium. For specific cutting parameters and holder compatibility, technical data sheets or individual cutting tests are recommended to qualify the insert for a given machining task. For tailored advice on application and tooling with Walter Tools' WNMG060404-FM5 WSM10S inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations and ordering assistance. Technical Data Article number: WNMG060404-FM5-WSM10S-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger-tec Silver Grade: WSM10S Chipbreaker: FM5 Facts Size code: 06 Thickness code: 04 Corner radius: 0.4 mm Free rake angle: 0° (negative) Tolerance class: M Special features Insert form: Trigon 80° Geometry execution: G Material application: S / M (superalloys/titanium and stainless steels) Coating: Tiger·tec Silver Optimised for secure chip formation and edge stability FAQ What materials is this insert best suited for? The WNMG060404-FM5 WSM10S insert from Walter Tools is optimised for stainless steels and heat‑resistant superalloys (ISO 513 material groups M and S), offering improved wear resistance and chip control for these challenging materials. How does the 0° negative rake affect machining? A 0° negative rake increases the mechanical strength of the cutting edge; the WNMG060404‑FM5 WSM10S therefore provides greater robustness in heavy cutting and interrupted cuts, though cutting forces may be higher than with positive‑rake geometries. Which operations suit the Trigon 80° form and 0.4 mm radius? The Trigon 80° shape with a 0.4 mm corner radius is well suited to roughing and semi‑finishing where edge stability is required; the geometry helps resist chipping in high‑stress turning applications when using the Walter Tools insert. Is the FM5 chipbreaker suitable for long continuous cuts? Yes, the FM5 chipbreaker on this insert supports reliable chip control during continuous turning, contributing to consistent surface quality and reduced risk of chip entanglement when machining appropriate materials. Can this insert be used in conventional tool holders? The WNMG060404‑FM5 form is a standard indexable insert shape compatible with holders designed for WNMG inserts; verify seating and clamping specifications against the holder manufacturer’s data to ensure correct fitment. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and Walter Tools. The offered item is an original, factory‑new product of Walter Tools.
WNMG060404-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a high‑performance combination: a Tiger·tec Silver coated grade that ensures stable cutting edges and the FM5 chipbreaker for secure chip control, delivering reliable productivity when machining stainless steels and heat‑resistant alloys. Order the inserts directly via Metav Werkzeuge or consult the team for process‑specific recommendations. WNMG060404-FM5 WSM20S — Indexable turning insert, Tiger·tec Silver, Walter Tools The WNMG060404-FM5 WSM20S insert provides robust performance for demanding turning applications, especially on stainless steels and heat‑resistant superalloys *Tiger·tec Silver coating for high wear resistance *Optimised FM5 chipbreaker for secure chip control *Trigon 80° form with 0° negative rake for stability *Suitable for stainless steels and superalloys Built for challenging materials — consistent edge life and process reliability The combination of the WSM20S grade within the Tiger·tec Silver family and a specifically tuned geometry supports secure cutting when machining tough materials. The coated carbide construction increases resistance to thermal and abrasive wear, which leads to more predictable tool life when turning stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S). For operations that require repeatable performance under elevated temperatures, this insert reduces the risk of edge breakdown and unplanned interruptions. Secure chip control and reduced rework thanks to FM5 chipbreaker The FM5 chipbreaker is engineered to create short, manageable chips across a range of cutting depths, improving evacuation in both continuous and interrupted cuts. Stable chip formation minimises heat concentration at the cutting edge, supporting a consistent surface finish and reducing downstream rework. In practical terms, this means fewer part rejections and greater throughput for batch production where process stability is paramount. Geometry and form that favour rigidity and versatility A Trigon 80° insert form with a 0° negative rake promotes edge strength and mechanical stability, making the component suitable for heavier cuts and interrupted turning. The 0.4 mm corner radius balances edge robustness with achievable surface quality, while the insert size and thickness codes match common toolholder systems for straightforward integration. These geometry choices favour shops that need a durable turning solution without sacrificing compatibility. Practical benefits for workshop integration and process optimisation Using this grade and geometry combination supports longer tool life and consistent part quality, which translates into lower tool consumption per produced part and improved machine uptime. The insert is a practical choice for job shops and production environments handling difficult‑to‑cut materials, and the familiar industry form factor simplifies tool management. For tailored feeds and speeds, Metav Werkzeuge can advise on cutting data to match machine power, workpiece condition and coolant strategy. Contact Metav Werkzeuge for application advice and to secure WNMG060404-FM5 WSM20S inserts with Tiger·tec Silver coating for enhanced process reliability Technical data Article number: WNMG060404-FM5-WSM20S-WALTER SKU: WNMG060404-FM5-WSM20S-WALTER Name: Drehwendeschneidplatte / indexable turning insert — WNMG060404-FM5 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM5 Shape: Trigon 80° Free angle: 0° (negative) Corner radius: 0.4 Plate size: 06 Plate thickness code: 04 Tolerance class: M Facts Corner radius: 0.4 mm Plate size code: 06 Thickness code: 04 Free angle: 0° (negative) Tolerance class: M Applicable material codes: S / M Special features Coating: Tiger·tec Silver Material: coated carbide (coated hardmetal) Chip control: FM5 chipbreaker Geometry: Trigon 80°, 0° negative rake Typical applications: heavy‑duty turning, interrupted cuts, difficult‑to‑cut alloys Suitable for: stainless steels and heat‑resistant superalloys FAQ What materials is this insert suitable for? The WNMG060404-FM5 WSM20S insert from Walter Tools is designed for stainless steels (M) and heat‑resistant superalloys/titanium (S), offering wear resistance and edge stability where thermal loads are high. How does the FM5 chipbreaker improve machining? The FM5 chipbreaker on the WNMG060404-FM5 WSM20S promotes short, controllable chips that aid evacuation and reduce heat concentration at the cutting edge, supporting consistent surface finish and longer tool life. Is the Trigon 80° form suitable for heavy‑duty turning? Yes. The Trigon 80° form combined with a 0° negative rake on the WNMG060404-FM5 insert increases mechanical strength and rigidity, making it well suited to heavier cuts and intermittent turning operations. What performance advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this Walter Tools insert enhances resistance to abrasive and thermal wear, which leads to more predictable runtimes and reduced frequency of tool changes in demanding applications. Can this insert be used in common toolholder systems? The WNMG060404-FM5 WSM20S follows standard industry codes and dimensions for trigon inserts, allowing integration with compatible toolholders; specific holder compatibility should be checked against the toolholder catalogue. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and the WPP10G grade’s suitability for steel to achieve stable, repeatable turning performance; order directly via Metav Werkzeuge or consult our specialists for process recommendations. WNMG060404-FP5 WPP10G Turning Insert — Tiger·tec Gold, for Steel (Walter Tools) WNMG060404-FP5 WPP10G is an indexable turning insert engineered for robust steel machining, combining a Tiger·tec Gold coating with an FP5 chipbreaker for reliable chip control. Tiger·tec Gold coating for long life Optimised FP5 chipbreaker for steel chips Trigon 80° geometry for stable turning 0° negative rake for robust cutting Durable coating that extends productive tool life The WNMG060404-FP5 WPP10G grade uses the Tiger·tec Gold coating technology, a multi-layer system applied to a coated carbide substrate to resist abrasive and adhesive wear during turning of steel. This surface treatment reduces flank and crater wear, which translates into fewer insert changes and more predictable tool life. For production environments where consistent cycle times matter, the colouring and structure of the coating support steady cutting-edge performance under the thermal and mechanical loads typical of steel turning, contributing to lower overall machining costs and improved process reliability. Geometry and chip control that increase machining efficiency The combination of the FP5 chipbreaker and Trigon 80° insert form is optimised for conventional turning processes in steels. The chipbreaker promotes short, controllable chip formation across a range of cutting conditions, reducing the risk of entanglement and downtime. The trigon shape provides three cutting edges per indexable insert and a stable cutting attitude in grooving and external turning operations. The 0° negative rake contributes to a robust edge capable of withstanding interrupted cuts and heavier depth-of-cut conditions, making the insert suitable for both finishing and medium roughing steps where process security is a priority. Precision dimensions for reliable repeatability Manufactured to a tolerance class M, this insert offers consistent geometry for repeatable set-up and measurements. Key dimensions such as the 06 insert size, 04 plate thickness and 0.4 mm corner radius deliver the expected contact and strength characteristics when mounted in standard tool holders. The stable dimensions aid in reproducible part quality and predictable tool behaviour, reducing setup time and part variance. For shops using common ISO tool systems, this compatibility ensures fast changeovers and straightforward inventory management. Practical advantages for workshop and production use Designed specifically for groups defined under ISO P, the insert handles the heat and chip formation typical of unalloyed and alloyed steels with effective thermal resistance and stable chip evacuation. The WPP10G grade balances wear resistance and toughness to suit mixed production runs where both tool life and surface finish matter. By selecting an insert with these characteristics, operations can expect fewer interruptions, consistent surface quality and improved throughput—advantages that feed directly into both one-off jobs and continuous production environments. For application advice or to specify this Walter Tools Tiger·tec Gold insert for a current machining process, contact Metav Werkzeuge for tailored recommendations and order support. Technical Data Article number: WNMG060404-FP5-WPP10G-WALTER Designation: WNMG060404-FP5 WPP10G Type: Turning insert (indexable) Grade / Series: WPP10G, Tiger·tec Gold Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Free rake angle: 0° (negative) Insert size: 06 Plate thickness: 04 Tolerance class: M Special features FP5 chipbreaker Trigon 80° plate form Coated carbide (Tiger·tec Gold technology) Suited for steel (ISO P) Robust edge for interrupted cuts FAQ What materials is this insert intended for? The WNMG060404-FP5 WPP10G insert is formulated for machining steel (ISO P) and is optimised for the heat and chip formation typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and improves edge life, leading to more consistent cycle times and fewer insert changes in serial production. Which chipbreaker suits heavy cutting conditions? The FP5 chipbreaker provides controlled chip formation for a wide range of depths of cut and is particularly effective in steel turning to reduce entanglement and improve surface finish. Is the insert compatible with standard ISO tool holders? Yes, the insert follows ISO-based dimensions (06 size, 04 thickness, tolerance class M) and is compatible with standard trigon tool holders designed for WNMG-style inserts. What cutting conditions are recommended for interrupted cuts? The 0° negative rake and robust geometry of this insert provide added strength for interrupted cuts; select conservative feeds and depths initially and adjust based on process feedback. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060404-FP5 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, proven Tiger·tec Gold coating and stable Trigon geometry to keep turning operations productive and consistent; order the WNMG060404-FP5 WPP20G directly via Metav Werkzeuge or consult our specialists for application advice. WNMG060404-FP5 WPP20G Drehwendeschneidplatte by Walter Tools — Tiger·tec Gold, FP5 chipbreaker The WNMG060404-FP5 WPP20G is a coated carbide turning insert designed for precision machining of steel, combining a Trigon 80° geometry with an FP5 chipbreaker for controlled cutting and long tool life. Tiger·tec Gold coated carbide grade WPP20G Trigon 80° insert geometry FP5 chipbreaker optimised for steel 0.4 mm corner radius, 0° negative rake Consistent cutting results for steel production The Tiger·tec Gold coating and the WPP20G grade deliver a balance of wear resistance and toughness that is tuned for steel machining. The coated carbide formulation reduces flank wear under typical turning temperatures and extends tool life, while the FP5 chipbreaker ensures stable chip formation. For manufacturers requiring repeatable component tolerances and predictable tool-change intervals, this combination supports higher process reliability and fewer unplanned stoppages. Geometry engineered for productivity and accessibility The Trigon 80° shape provides robust cutting edge support and access to various turning contours. With a 0.4 mm corner radius and 0° negative rake, the insert offers a compromise between edge strength and cutting performance for medium to general turning tasks. The FP5 chipbreaker facilitates short, manageable chips when machining unalloyed and alloyed steels, improving machine uptime and simplifying chip handling in automated environments. Practical benefits of the chipbreaker and coating The FP5 chipbreaker is configured to control chip flow at common feed and speed ranges for steel, which leads to predictable heat distribution and reduced risk of built-up edge. Combined with the Tiger·tec Gold surface, the insert supports stable cutting even under variable feed conditions, translating into fewer reworks and improved surface finish. This technical setup is particularly useful for shops aiming to increase throughput while maintaining dimensional quality. Integration into production workflows The insert is compatible with standard WNMG toolholders and can be introduced into existing turning programmes without major process changes. Its tolerance class M ensures consistent geometry batch-to-batch, aiding tool qualification and process documentation. Production engineers will value the insert’s clear specification — from chipbreaker to corner radius — for straightforward machining data selection and easier cutting parameter optimisation. Contact Metav Werkzeuge for tailored cutting data, availability and to secure WNMG060404-FP5 WPP20G supplies — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: WNMG060404-FP5-WPP20G-WALTER Product designation: WNMG060404-FP5 WPP20G Product type: Drehwendeschneidplatte / turning indexable insert Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert size: 06 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Insert form: Trigon 80° Special features Chipbreaker: FP5 Coating: Tiger·tec Gold (coated carbide) Material application: Steel (P) Tolerance class: M Execution: G FAQ What materials is this insert best suited for? The WNMG060404-FP5 WPP20G is optimised for machining steel (ISO group P); the WPP20G grade and FP5 chipbreaker handle the typical heat and chip behaviour encountered with unalloyed and alloyed steels. How does the FP5 chipbreaker affect surface finish? The FP5 chipbreaker produces short, controlled chips and stabilises cutting forces, which helps achieve consistent surface quality and reduces the likelihood of built-up edge during turning operations. Is the insert compatible with standard WNMG toolholders? Yes, the insert follows standard WNMG dimensions and can be used with toolholders that accept WNMG060404 inserts, enabling easy integration into existing turning setups. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WPP20G grade increases wear resistance and toughness balance, resulting in longer tool life and more predictable performance when machining steel. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060404-FW5 WKP01G WKWP01G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, robust edge geometry and optimised chip control for steady production performance; order the inserts through Metav Werkzeuge or consult their tooling specialists for application support. WNMG060404-FW5 WKP01G turning insert — Trigon 80°, Tiger·tec Gold A WNMG060404-FW5 WKP01G turning insert engineered for medium to heavy turning of steel and cast iron, offering a durable coated-carbide grade for industrial machining. Tiger·tec Gold coating for extended tool life WKP01G grade optimised for steel and cast iron Trigon 80° form for strong cutting edge 0.4 mm corner radius for reliable surface finish Chipbreaker FW5 for stable chip control Increased uptime through a wear‑resistant grade The Tiger·tec Gold coating combined with the WKP01G carbide grade delivers marked resistance to abrasive wear and thermal loading during steel and cast-iron turning. This results in fewer tool changes and more productive machine hours, which directly benefits batch throughput and cost per part. The plated surface reduces adhesive wear and helps maintain a consistent cutting edge, supporting steady performance in series production. Robust geometry that stabilises cutting processes The Trigon 80° shape and 0° negative rake provide a reinforced cutting edge that tolerates interrupted cuts and heavier cross-sections without premature chipping. A 0.4 mm corner radius balances edge strength with achievable surface quality, while the FW5 chipbreaker promotes controlled chip formation for medium to heavy feeds. For users unfamiliar with insert geometry: the trigon profile offers a compact, rigid seat in the toolholder that enhances stability and repeatability in turning operations. Seamless integration into industrial turning systems Standard WNMG designation and tolerance class M ensure interchangeability across common toolholders, simplifying inventory and tool management. The insert thickness (04) and size (06) suit a wide range of clamping systems; pairing the insert with a suitable negative‑rake holder unlocks its full potential. Where process clarity is required, Metav Werkzeuge provides technical guidance to match cutting data and holder choice to the material and machining task, reducing setup time and improving first‑pass yields. Request Walter Tools Tiger·tec Gold inserts via Metav Werkzeuge for assured supply and application advice — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical data Article number: WNMG060404-FW5-WKP01G-WALTER SKU: WNMG060404-FW5-WKP01G-WALTER Product type: Turning insert Key dimensions Size: 06 Thickness: 04 Platen form: Trigon 80° Corner radius: 0.4 mm Rake angle: 0° (negative) Features & materials Grade: WKP01G Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FW5 Tolerance class: M Application groups: Steel (P), Cast iron (K) Series: Tiger·tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The WNMG060404-FW5 WKP01G is designed for machining steel (P) and cast iron (K), utilising the WKP01G grade and Tiger·tec Gold coating to manage heat and abrasive wear. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker promotes short, controlled chips in medium to heavier turning operations, which improves chip evacuation and reduces the risk of built-up edge. Why choose a Trigon 80° insert over other shapes? A Trigon 80° form provides a strong cutting edge and compact seating, increasing rigidity and resistance to edge failure during interrupted cuts or heavy cuts. Is the insert compatible with standard WNMG toolholders? Yes — the WNMG designation and tolerance class M ensure compatibility with common negative‑rake toolholders suited to this insert form and size. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius offers a balance between edge strength and surface quality, delivering consistent finishes for general turning while maintaining durability. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for clarification purposes only. There is no affiliation between our company and the trademark owners; the offered item is an original, factory‑new product from the stated manufacturer. Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany
WNMG060404-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a high-performance, Tiger·tec Gold-coated grade combined with a controlled FW5 chipbreaker and a robust Trigon 80° geometry for reliable steel turning and predictable tool life. Order directly via Metav Werkzeuge or ask their technical consultants for cutting data and application support. WNMG060404-FW5 WPP10G turning indexable insert — Tiger·tec Gold, Trigon 80° (Walter Tools) The WNMG060404-FW5 WPP10G is a negative-rake trigon insert engineered for productive machining of steel in general turning applications. Tiger·tec Gold coated carbide Trigon 80° geometry for robust cuts FW5 chipbreaker for controlled chip flow 0.4 mm corner radius for reliable finishes Higher throughput through coated cutting-grade technology The insert is built on the WPP10G grade, a coated carbide solution from the Tiger·tec Gold family that prioritises wear resistance and extended edge life when machining steels. Its coating system reduces flank wear and heat build-up, which translates into longer periods between index changes and fewer interruptions on the shop floor. With the insert classified for ISO P (steel) applications, the result is a measurable improvement in productivity and lower overall tooling costs per component when compared with uncoated grades. Stable geometry for consistent process performance The Trigon 80° shape combined with a 0° negative relief angle provides a stable cutting edge that resists chipping under interrupted cuts and higher radial forces. The moderate 0.4 mm corner radius balances strength and surface quality, delivering dependable finishes without sacrificing tool life. Tolerance class M ensures consistent seating in the toolholder, reducing variation between inserts and aiding repeatable results in serial production. These geometric characteristics help to maintain dimensional accuracy and reduce scrap rates in demanding turning operations. Chip control and application versatility for shop-floor efficiency Equipped with the FW5 chipbreaker, the insert produces well-controlled chip forms suitable for a wide range of steel grades, from softer, tougher variants to harder, wear-prone alloys. The combination of chipbreaker and coated grade minimises built-up edge and improves surface integrity, which is particularly beneficial in medium- to high-feed turning. As an indexable insert in the WNMG family, it fits standard toolholders for straightforward integration into existing setups, offering a practical upgrade path for workshops seeking higher process reliability. For parts production that demands consistent results from a Tiger·tec Gold grade, contact Metav Werkzeuge for tailored recommendations or to request cutting parameters and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: WNMG060404-FW5-WPP10G-WALTER Designation: WNMG060404-FW5 WPP10G Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Relief angle: 0° (negative) Insert size: 06 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FW5 Geometry: Trigon 80° Material application: Steel (ISO P) FAQ What steels is this insert suited to? The WPP10G grade is designed for general steel machining (ISO P), covering a broad range from unalloyed to alloyed steels with attention to typical heat and chip formation during turning. How does the FW5 chipbreaker affect performance? The FW5 chipbreaker creates controlled chip forms, reducing risk of entanglement and improving surface finish stability when cutting steels with varying chip behaviour. Can this insert handle interrupted cuts or heavier feeds? Yes, the Trigon 80° geometry and 0° negative relief provide enhanced edge strength and resistance to chipping, making it suitable for interrupted cuts and more demanding feed conditions. Is the product compatible with standard WNMG toolholders? The insert follows WNMG size conventions and tolerance class M, ensuring compatibility with standard holders designed for this insert family; correct clamping and seat condition remain essential. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer Walter Tools.
WNMG060404-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of the WPP20G coated carbide grade, the FW5 chipbreaker and the Trigon 80° geometry for robust, repeatable steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. WNMG060404-FW5 WPP20G indexable turning insert — Walter Tools, Tiger·tec Gold, FW5 chipbreaker A high-performance indexable insert designed for general steel turning and robust chip control in series production. Tiger·tec Gold coating for consistent life FW5 chipbreaker for controlled chips Trigon 80° geometry for strength and versatility 0.4 mm corner radius for reliable edge stability Consistent chip control and optimised wear behaviour for steel The WPP20G cutting grade, part of the Tiger·tec Gold series, is a coated carbide solution developed for the thermal and chip-formation characteristics encountered when machining steel (P). The combination of a modern coating and substrate improves resistance to built-up edge and thermal wear, which translates into longer tool life and fewer index changes. The FW5 chipbreaker promotes short, controllable chips during turning, reducing the risk of entanglement and easing chip evacuation in automated setups. For production environments that demand repeatability, this insert delivers measurable process stability and a reduced number of unscheduled stops. Geometry that increases productivity and edge security The Trigon 80° form and 0.4 mm corner radius provide a robust edge that tolerates moderate interruptions and varied feed rates while maintaining surface integrity. The 0° rake (negative) generates a stronger cutting edge and lower risk of chipping on the leading edge, making the insert well suited to medium-duty finishing and semi-finishing operations. The geometry supports higher metal removal rates without sacrificing dimensional accuracy, allowing shorter cycle times and a consistent part quality in batch production. Practical integration into machining processes for lower total cost With tolerance class M and a standardised form code, the insert integrates readily into existing toolholders and tool management systems, simplifying stocking and tool-change procedures. The coated grade’s broad suitability for unalloyed and alloyed steels reduces the need for multiple grades, which streamlines procurement and inventory. In sum, the design supports economic machining through fewer tool changes, predictable tool life and improved uptime in turning operations. Contact Metav Werkzeuge today for detailed machining recommendations and to discuss how the Walter Tools WNMG060404-FW5 WPP20G insert can improve productivity in steel turning projects Technical data Article number: WNMG060404-FW5-WPP20G-WALTER Designation: WNMG060404-FW5 Full designation: WNMG060404-FW5 WPP20G Brand: Walter Tools Facts Insert size code: 06 Plate thickness code: 04 Corner radius: 0.4 mm Geometry: Trigon 80° Rake angle: 0° (negative) Chipbreaker: FW5 Tolerance class: M Special features Coating / grade: WPP20G (Tiger·tec Gold coated carbide) Series: Tiger·tec Gold Material application: Steel (P) Substrate: coated hardmetal / carbide Typical uses: turning, finishing and semi-finishing in steel FAQ What materials is this insert designed for? The insert is designed for machining steel; the WPP20G grade, from the Tiger·tec Gold family, is optimised for the thermal and chip-formation behaviour of unalloyed and alloyed steels. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker produces short, controllable chips, improving chip evacuation and reducing the risk of chip-related interruptions in automated turning operations. Which toolholders are compatible with Trigon 80° inserts? Trigon 80° inserts fit standard indexable turning toolholders that accept WNMG-style triangular inserts; verify the seat and clamp type to ensure proper fit. What are the advantages of the 0° negative rake? A 0° negative rake strengthens the cutting edge, reduces the tendency to chip under interrupted cuts and supports higher feed rates for robust, stable turning. Is the grade suitable for finishing and semi-finishing? Yes, the combination of 0.4 mm corner radius and the WPP20G coating supports both finishing and semi-finishing applications with consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
WNMG060404-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of durable coating technology, a stable FW5 chipbreaker and a trigon geometry that keeps machining of rostfreier Stahl and heat-resistant alloys consistent and productive. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. WNMG060404-FW5 WSM20S indexable turning insert, Tiger·tec Silver — Walter Tools The WNMG060404-FW5 WSM20S is an indexable turning insert designed for heavy-duty finishing and semi-finishing of rostfreier Stahl and high-temperature alloys, offering a robust geometry and the Tiger·tec Silver coating for extended tool life. Tiger·tec Silver coated WSM20S Optimised FW5 chipbreaker for stable chips Trigon 80° form with 0.4 mm corner radius Negative 0° relief for robust cutting edge Improved process reliability when machining demanding alloys The Tiger·tec Silver grade WSM20S provides a coated carbide formulation optimised for materials classified M and S according to ISO 513. This means reliable performance on rostfreier Stahl and heat-resistant superalloys or titanium, where heat generation and built-up edge typically limit cycle times. The coating reduces wear and supports a stable cutting edge, which translates into fewer tool changes and more predictable component tolerances — a direct efficiency gain for repetitive production sequences. Consistent chip control for uninterrupted production Equipped with the FW5 chipbreaker, the insert promotes controlled chip formation even under adverse cutting conditions. Controlled chips reduce the risk of rework and machine downtime by preventing entanglement and improving evacuation. For turning operations that demand steady cycle times, this geometry contributes to smoother feeds and allows operators to maintain cutting parameters closer to the process window without sacrificing surface quality. Geometry engineered for repeatable accuracy The trigon 80° form combined with a 0.4 mm corner radius and a negative 0° relief delivers a compromise between edge strength and precision. The trigon form offers secure clamping and stable seat support, while the corner radius enhances edge durability in interrupted cuts. These features make the insert suitable for jobs where repeated dimensional accuracy is essential, such as serial components in medical or aerospace sectors working with tough alloys. Practical benefits for production-oriented workshops Beyond raw performance, the insert’s design supports rapid indexability and predictable wear behaviour. The combination of the Tiger·tec Silver coating and the WSM20S grade means longer intervals between regrinds or replacements, improving overall tool utilisation. For shops focused on throughput and constant quality, the insert reduces process variability while keeping handling and tool management straightforward. For reliable high-temperature alloy machining with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for ordering and application support on the WNMG060404-FW5 WSM20S insert Technical data Article number: WNMG060404-FW5-WSM20S-WALTER Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Product type: indexable turning insert Designation: WNMG060404-FW5 WSM20S Dimensions / core values Insert size code: 06 Thickness code: 04 Corner radius: 0.4 mm Form: Trigon 80° Relief angle: 0° (negative) Tolerance class: M Special features / applications Coating: Tiger·tec Silver (coated carbide) Chipbreaker: FW5 Material suitability: S / M Suitable for: rostfreier Stahl Also for: heat-resistant superalloys and titanium Execution: G FAQ What materials are best processed with this insert? The WNMG060404-FW5 WSM20S is tailored for materials in groups M and S — primarily rostfreier Stahl and heat-resistant superalloys or titanium — where thermal stability and edge strength are critical. What does the WSM20S grade indicate? WSM20S denotes Walter Tools’ coated-carbide grade within the Tiger·tec Silver family, optimised for wear resistance and stable edge behaviour when machining tough, adhesive materials. How does the FW5 chipbreaker influence machining? The FW5 chipbreaker on this insert produces short, well-controlled chips, improving evacuation and reducing the chance of chip-related interruptions in turning operations. Is the insert suitable for interrupted cuts? Yes — the trigon 80° geometry and the 0.4 mm corner radius provide enhanced edge support and robustness for applications that include interrupted cutting. Can the insert be used on conventional and CNC lathes? The insert’s geometry and grade are designed for a wide range of turning machines; it performs well on both conventional and CNC lathes when matching cutting data and clamping are applied. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060404-MK5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKK10S carbide grade for durable performance in cast iron turning; the Trigon 80° geometry and MK5 chipbreaker deliver stable cutting and consistent chip control. Order the insert directly via Metav Werkzeuge or consult the technical team for process recommendations. WNMG060404-MK5 WKK10S indexable turning insert – Tiger‑tec Silver for cast iron by Walter Tools The WNMG060404-MK5 WKK10S is an indexable turning insert engineered for efficient machining of cast iron, combining a Trigon 80° form with a specialised chipbreaker for controlled chips and high process reliability. Tiger‑tec Silver coating for wear resistance Optimised for cast iron machining Trigon 80° geometry for stable turning 0.4 mm corner radius for edge strength Longer tool life through optimised coating and grade The coated WKK10S carbide grade, based on Tiger‑tec Silver technology, is formulated to resist the abrasive wear typical of cast iron machining. The combination of a robust coating and a wear‑resistant substrate results in a slower wear rate and more predictable tool life, which in turn reduces tool changes and machine downtime. For production environments this means improved uptime and a clearer scheduling horizon; the insert’s behaviour under load is engineered to provide consistent performance across a range of interrupted and continuous turning operations. Reliable chip control and stable cutting performance The Trigon 80° plate form combined with the MK5 chipbreaker produces short, controllable chips when cutting cast iron, preventing tangled swarf and minimising the risk of tool or workpiece damage. The 0° negative rake (negative clearance) offers a robust cutting edge that tolerates higher radial forces and interrupted cuts, while the 0.4 mm corner radius increases edge strength for enhanced resistance to chipping. These geometry choices translate into steady surface quality and fewer process interruptions, supporting lean and repeatable turning cycles. Seamless integration into production and consistent tolerances Designed as a true indexable solution, the insert fits common WNMG tool holders and benefits from a M tolerance class for interchangeability and reproducible clamping. The plate size and thickness ensure mechanical stability during high‑volume runs, and the geometry supports predictable force vectors for fixture and spindle load planning. Where process optimisation is a priority, this insert assists in standardising parameters across batches, contributing to measurable productivity gains and simplified inventory management for cast iron turning applications. Contact Metav Werkzeuge for application advice and to secure Walter Tools Tiger‑tec Silver WKK10S inserts for reliable cast iron production: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: WNMG060404-MK5-WKK10S-WALTER Designation: WNMG060404-MK5 WKK10S Brand: Walter Tools Series: Tiger‑tec Silver Facts Geometry: Trigon 80° Corner radius: 0.4 mm Plate size: 06 Thickness: 04 Clearance / rake: 0° (negative) Tolerance class: M Special features Chipbreaker: MK5 Coating: Tiger‑tec Silver Grade: WKK10S (coated carbide) Suitable for: cast iron (K) Plate form: indexable turning insert FAQ What materials are suitable for this insert? The WNMG060404-MK5 WKK10S is specified for machining cast iron; the WKK10S grade and Tiger‑tec Silver coating are optimised for abrasive cast materials. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on this indexable turning insert produces short, broken chips in cast iron, improving swarf disposal and reducing the risk of chip entanglement during continuous and interrupted cuts. What advantages does the Trigon 80° form provide? Trigon 80° geometry offers a stable cutting edge and favourable approach angle for turning, enhancing edge strength and contributing to consistent surface finish with the WKK10S grade. Is the insert compatible with standard WNMG holders? Yes, the WNMG060404-MK5 format conforms to standard tool holders for WNMG plates and benefits from an M tolerance class for reproducible seating and clamping. Why choose the Tiger‑tec Silver series? Tiger‑tec Silver coating provides improved wear resistance and thermal stability for coated carbide grades like WKK10S, which is particularly beneficial when machining abrasive cast iron materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
WNMG060404-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, precise Trigon 80° geometry and the MK5 chipbreaker for efficient, repeatable cast iron turning — order the WNMG060404-MK5 WKK20S directly via Metav Werkzeuge or ask the consultants for application support. WNMG060404-MK5 WKK20S indexable turning insert, Trigon 80° – Walter Tools The WNMG060404-MK5 WKK20S is an indexable turning insert engineered for reliable machining of cast iron components in production environments. Tiger·tec Silver coating for high wear resistance Optimised for cast iron machining (ISO K) Trigon 80° geometry for secure chip control 0.4 mm corner radius for consistent surface finish Longer tool life through advanced coating and substrate The combination of the Tiger·tec Silver coating and the WKK20S grade produces a wear-resistant cutting edge designed for the abrasive nature of cast iron. The coated carbide substrate resists flank wear and abrasion, extending interval times between index changes and reducing overall tool cost per component. The MK5 chipbreaker is matched to the grade to encourage short, fragmenting chips commonly required when machining grey and nodular cast irons; this improves process security in automated turning cells and eases chip evacuation without compromising the cutting edge. For operations where component throughput and predictable tool life are priorities, this specification supports a stable production flow and fewer unscheduled stops. Geometry designed for repeatable surface quality and stability The trigon, 80° insert shape with a 0.4 mm corner radius offers a balance between edge strength and surface finish. The blunt negative relief (0°) increases insert robustness under interrupted cuts and hard inclusions that are typical in cast iron workpieces. The M tolerance class and standard plate thickness provide consistent seating and repeatable positioning in the tool holder, which translates into uniform part geometry and reduced scrap rates. For machinists and process engineers, the result is a dependable insert that contributes to dimensional consistency across batches. Process benefits: chip control, rigidity and compatibility Integrating this insert into existing turning operations brings measurable process advantages: the tailored chip control reduces nestling and toolholder interference, the solid geometry supports higher feed stability, and the grade’s focus on cast iron enables predictable wear patterns. As a component of Walter Tools’ Tiger·tec Silver range, the insert aligns with modern production demands for productivity and reproducibility. Technical teams benefit from straightforward tool selection for ISO group K materials and can rely on documented performance trends when planning tool rotations. For shops aiming to combine efficiency with consistent quality, this insert offers a practical route to improved cycle times and lower per-part tooling costs. For application advice or to arrange a shipment of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored recommendations and fast processing: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data SKU: WNMG060404-MK5-WKK20S-WALTER Article: WNMG060404-MK5 WKK20S Product type: Indexable turning insert Brand: Walter Tools Facts Plate form: Trigon 80° Plate size: 06 Plate thickness: 04 (code) Corner radius: 0.4 mm Relief angle: 0° (negative) Chipbreaker: MK5 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated carbide) Application: cast iron (ISO K) Designed for abrasive wear resistance and short-chip control FAQ What materials is this insert suitable for? The WNMG060404-MK5 WKK20S is specifically formulated for cast iron (ISO K) applications, utilising the Tiger·tec Silver coating to manage abrasive wear. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker promotes short, controllable chips when using the WKK20S grade, improving chip evacuation and reducing the risk of entanglement in turning operations with Walter Tools inserts. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius delivers a compromise between edge strength and surface quality; with appropriate feeds, the insert supports consistent finishes while maintaining robustness under intermittent cuts. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
WNMG060404-MM5 WMP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating together with the MM5 chipbreaker and the Trigon 80° form to secure stable chip formation and long tool life when machining stainless steel; order directly via Metav Werkzeuge or consult the technical team for application advice. WNMG060404-MM5 WMP20G indexable turning insert for stainless steel — Walter Tools The WNMG060404-MM5 WMP20G is an indexable turning insert designed for reliable performance in stainless steel machining, combining Trigon 80° geometry with a 0° negative rake for robust cutting under medium to heavy conditions. Tiger·tec Gold coating for extended tool life MM5 chipbreaker for secure chip control Trigon 80° geometry for stable turning performance 0° negative rake suitable for robust cuts Consistent chip control for uninterrupted production The Trigon 80° form and the MM5 chipbreaker work together to provide predictable chip formation when working with stainless steel (ISO group M). The chipbreaker is engineered to break swarf into manageable lengths, reducing the risk of entanglement and improving machine uptime. This results in fewer interruptions for chip clearing and a more continuous production flow, which is particularly beneficial in shops focusing on batch turning or heavier engagement cuts. The mechanical stability of the triangular geometry also supports repeatable setup and consistent component quality. Geometry and cutting angle that support robust machining The insert’s 0° negative rake and its specified corner radius of 0.4 mm offer a balance between edge strength and cutting forces. A negative rake increases the effective cutting edge robustness, making the insert well suited to medium to robust turning operations where built-up edge and thermal load are concerns. The 0.4 mm corner radius enhances edge durability and helps to maintain surface integrity on demanding stainless steel components, while the Trigon 80° platform provides access and stability on shoulders and interrupted cuts. Coating and material pairing for improved tool life The Tiger·tec Gold coating delivers thermal resistance and improved wear characteristics under the high temperatures typically generated when machining stainless steel. Coating technology in this series is aimed at reducing adhesive wear and preserving a stable cutting edge, which translates into longer tool life and fewer indexings. Combined with the solid carbide substrate in the Walter grade, the insert supports consistent surface finishes and repeatable tolerances in production environments where tool-change intervals and process stability matter most. Practical benefits for daily workshop use For practical shop-floor application, the insert’s format and chip control reduce manual handling and minimise downtime caused by poor swarf control. The Trigon geometry facilitates secure clamping in most standard toolholders for WNMG-style inserts, making integration into existing toolsets straightforward. Shops processing stainless steel under mixed cutting conditions will find the combination of Tiger·tec Gold and the MM5 chipbreaker particularly useful for maintaining throughput without sacrificing component quality. For precise selection assistance and fast delivery of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and ordering support Technical data SKU: WNMG060404-MM5-WMP20G-WALTER Designation: WNMG060404-MM5 WMP20G Manufacturer: Walter Tools Numbers / Core technical data Insert size: 06 Thickness code: 04 Corner radius: 0,4 mm Relief angle: 0° (negative) Designs / Special features Series: Tiger·tec Gold Grade: WMP20G Chipbreaker: MM5 Insert form: Trigon 80° Material group: M (stainless steel applicability) FAQ What materials is this insert intended for? The WNMG060404-MM5 WMP20G insert is developed for stainless steel (ISO group M), providing controlled chip formation and edge stability in stainless steel machining. How does the MM5 chipbreaker improve performance? The MM5 chipbreaker on this Walter Tools insert shapes chips into short, controllable segments, which reduces swarf issues and supports uninterrupted production runs. What advantages does the Tiger·tec Gold coating offer? Tiger·tec Gold coating increases thermal resistance and wear protection, helping the insert maintain a stable cutting edge and extend indexing intervals when turning stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated brand.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com