WNMG060408-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, heat-resistant Tiger‑tec Silver coating, and a robust trigon geometry to maintain process reliability in demanding turning operations; order or request application advice via Metav Werkzeuge for tailored cutting data. WNMG060408-MM5 WSM30S turning insert — Trigon 80°, Tiger‑tec Silver (Walter Tools) WNMG060408-MM5 WSM30S is an indexable turning insert designed for heavy-duty finishing and medium shoulder turning in demanding materials such as rostfreier Stahl and heat-resistant superalloys. WNMG060408-MM5 by Walter Tools Tiger‑tec Silver coating for thermal stability MM5 chipformer for reliable chip control Trigon 80° geometry with 0.8 mm radius Increased process security and consistent edge life The coated grade WSM30S in the Tiger‑tec Silver family delivers a balance of hardness and thermal resistance, optimised for tough applications. The combination of coating technology and substrate reduces built-up edge and supports a stable cutting edge, which translates into fewer interruptions for edge dressing and longer intervals between indexings. For machining rostfreier Stahl and materials in group S, this means more predictable tool life and fewer scrapped parts, improving throughput and reducing overall machining cost per component. Predictable chip behaviour for safer machining The MM5 chipformer and the Trigon 80° profile promote controlled chip segmentation and evacuation even under elevated cutting temperatures. The insert’s geometry, including the 0.8 mm radius, supports a secure cutting action with a negative rake 0° configuration that prioritises edge strength. This results in reduced vibration and consistent surface quality on complex contours and interrupted cuts, making the insert suitable for both finishing passes and robust light roughing where chip control is essential. Applicability across high‑temperature alloys Engineered for materials in ISO groups M and S, the insert is effective when machining rostfreier Stahl, titanium and comparable superalloys that tend to generate heat and challenge edge stability. The coated cemented carbide substrate resists thermal softening and wear, enabling higher cutting performance in operations that require repeatable dimensional accuracy. Technical reliability here supports tighter process windows and reduces rework rates on high‑value components. Practical integration and production benefits The trigon format offers versatility in clamping and indexing, while the insert dimensions (06 size, thickness code 04) make it compatible with a broad range of tool holders. The robust design contributes to operator confidence and shorter setup cycles, and the clarity of the geometry simplifies grade selection for production planners. Combined, these attributes help maintain steady cycle times and support efficient batch production in tool rooms and job shops. Contact Metav Werkzeuge for application-specific cutting data, grade comparisons and availability of the Walter Tools WNMG060408-MM5 WSM30S turning inserts Technical Data Article number: WNMG060408-MM5-WSM30S-WALTER SKU: WNMG060408-MM5-WSM30S-WALTER Label: Drehwendeschneidplatte WNMG060408-MM5 WSM30S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade: WSM30S Series: Tiger‑tec Silver Core specifications Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 06 Plate thickness: 04 Tolerance class: M Design and applications Coating: Tiger‑tec Silver Chipformer: MM5 Shape: Trigon 80° Geometry / execution: G Material application: S / M Typical use: rostfreier Stahl and heat‑resistant superalloys FAQ What materials are best machined with this insert? The WNMG060408-MM5 WSM30S from Walter Tools is tailored for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where edge stability and thermal resistance are required. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WSM30S grade improves thermal stability and wear resistance, which helps maintain a stable cutting edge and extends usable index intervals in demanding operations. Is the MM5 chipformer suitable for interrupted cuts? Yes; the MM5 chipformer combined with the Trigon 80° profile promotes secure chip control and robust cutting behaviour, making it appropriate for interrupted and unstable cutting conditions. Which tool holders are compatible with the trigon insert? The trigon 80° format is compatible with standard holders designed for WNMG‑style inserts; selection should match the insert size code and clamping system for correct seat and orientation. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
WNMG060408-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, MP3 chip control and robust trigon geometry for consistent, productive steel machining. Order the insert directly via Metav Werkzeuge or ask the consultants for clarification on application and availability. WNMG060408-MP3 WPP10G – Turning insert, Tiger·tec Gold coating (Walter Tools) A WNMG060408-MP3 WPP10G turning insert designed for heavy-duty and general steel machining with MP3 chip control and trigon 80° geometry Walter Tools WNMG060408-MP3 WPP10G insert Tiger·tec Gold coating for robust wear resistance Trigon 80° form with 0.8 mm corner radius Optimised for steel machining (ISO P group) Increased productivity through durable coating and grade The Tiger·tec Gold grade combines a coated carbide substrate with a high-performance surface treatment to extend tool life and improve process stability. With the MP3 chipbreaker and optimised coating, the insert delivers consistent cutting behaviour when machining steels classified under ISO P. The engineered surface reduces flank wear and helps maintain cutting-edge integrity over longer cycles, which in turn supports higher cutting speeds and fewer tool changes. This results in measurable gains in machine uptime and part-to-part repeatability. Reliable chip control and secure cutting geometry The MP3 chipbreaker is designed to manage chip formation during common turning operations in steel, producing short, controllable chips that evacuate reliably from the cutting zone. Combined with the Trigon 80° geometry and a 0.8 mm corner radius, the insert offers a strong cutting edge that balances edge strength with acceptable surface finish. The negative 0° rake angle provides a neutral cutting face that supports stable cutting forces and reduced shock sensitivity in interrupted cuts or variable feed conditions, improving process reliability on production runs. Practical benefits for workshop and production planning Because the insert is targeted at steel applications, tool selection becomes simpler for mixed production environments: a single grade covers a range of unalloyed and alloyed steels. The format and tolerance class M ensure predictable seating and repeatable positioning in standard WNMG toolholders. Fewer tool changes and consistent chip behaviour help to reduce downstream handling and scrap rates, supporting leaner workflows and lower unit costs per component without compromising quality. Material compatibility and application scope The insert is specifically suitable for steel (ISO P), with the Tiger·tec Gold technology tailored to the thermal and mechanical conditions typical for such materials. While optimised for general turning, its robust edge and chip control make it appropriate for semi-finish and roughing tasks where durability and process security are priorities. The design emphasises productivity and repeatable results, enabling manufacturers to meet batch and series production demands with confidence. Contact Metav Werkzeuge for availability and application advice on the Walter Tools Tiger·tec Gold WNMG060408-MP3 WPP10G insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: WNMG060408-MP3-WPP10G-WALTER Article designation: WNMG060408-MP3 WPP10G Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Numbers / Core technical data Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 06 Plate thickness: 04 Tolerance class: M Designs / Special features Coated carbide (Tiger·tec Gold) Chipbreaker: MP3 Plate form: Trigon 80° Material suitability: Steel (ISO P) Negative rake configuration for stable cutting FAQ Which materials is this insert suitable for? The WNMG060408-MP3 WPP10G insert is engineered for machining steels and is specified for ISO group P applications, offering wear resistance adapted to typical steel cutting conditions. What advantages does the Tiger·tec Gold grade provide? Tiger·tec Gold provides a coated-carbide surface that improves wear resistance and thermal stability, allowing longer tool life and more consistent cutting performance on steel. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker promotes short, controllable chip shapes in turning operations, which assists in chip evacuation and reduces the risk of chip entanglement in automatic machining environments. What do the geometry codes mean for cutting behaviour? The Trigon 80° plate form with a 0.8 mm corner radius creates a robust cutting edge suited to general turning tasks; the neutral 0° rake contributes to stable cutting forces across varied feeds. Is this insert compatible with standard WNMG toolholders? Yes, the insert follows the WNMG form and dimensions and is intended for use in holders designed for that ISO geometry, offering repeatable seating and positioning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named brands. The offered item is original new goods from the manufacturer, Walter Tools.
WNMG060408-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Gold coated grade, the MP3 chipbreaker and robust Trigon geometry for reliable, high‑productivity turning of Stahl — order directly via Metav Werkzeuge or consult the team for cutting data and recommendations. WNMG060408-MP3 WNMG060408-MP3 WPP20G Turning insert for Stahl — Walter Tools A WNMG060408-MP3 WPP20G indexable turning insert optimised for medium‑duty to versatile turning of Stahl, combining a Tiger‑tec Gold coated grade with an MP3 chipbreaker for controlled chip formation. Tiger·tec Gold coating for extended tool life Trigon 80° geometry for secure clamping MP3 chipbreaker for controlled chip formation 0.8 mm corner radius for stable finishing Maximise removal rates without compromising tool life The combination of the Tiger‑tec Gold coating and the WPP20G grade delivers a balance between wear resistance and toughness that is designed specifically for common Stahl turning tasks. The coated carbide substrate reduces flank wear and adhesion while maintaining edge strength, which translates into longer tool life and fewer indexings. With the MP3 chipbreaker, chips are formed consistently, reducing interruptions and enabling higher uninterrupted cutting speeds — a concrete productivity gain for batch and single‑piece production alike. Secure clamping and consistent surface quality The Trigon 80° insert geometry offers a broad contact area and stable seating in the toolholder, which improves repeatability and reduces vibration during cutting. The 0° (negative) free angle and 0.8 mm corner radius contribute to a robust cutting edge that resists chipping under interrupted cuts and offers dependable finishing capability when required. These geometric choices, together with tolerance class M, help achieve reproducible surface quality and dimensional accuracy across series production. Practical selection and process reliability This grade and geometry combination is intended for general Stahl applications where predictable performance is essential. The WPP20G coating technology simplifies grade choice by covering a wide range of unalloyed and alloyed Stahl variants — the result is fewer inventory items and easier process standardisation. The insert’s chipbreaker and edge preparation reduce the need for frequent process tuning, supporting faster setup and stable cutting data across different batches. For reliable turning with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for personalised cutting data, availability and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG060408-MP3-WPP20G-WALTER Product type: Turning insert Designation: WNMG060408-MP3 WPP20G Manufacturer: Walter Tools Facts Geometry: Trigon 80° Corner radius: 0.8 mm Free angle: 0° (negative) Size code: 06 Thickness code: 04 Tolerance class: M Special features Grade: WPP20G (coated carbide) Series: Tiger‑tec Gold Chipbreaker: MP3 Material application: Stahl FAQ What materials is this insert suitable for? The WNMG060408-MP3 WPP20G insert is designed primarily for machining Stahl; the WPP20G grade and Tiger‑tec Gold coating optimise wear resistance and toughness for common Stahl turning operations. How does the MP3 chipbreaker affect cutting conditions? The MP3 chipbreaker promotes predictable chip control and stable chip shapes, which helps maintain uninterrupted cutting and reduces the risk of tool or workpiece damage during Stahl machining with this Walter Tools insert. Is the insert geometry suitable for interrupted cuts? Yes, the Trigon 80° shape combined with a 0° (negative) free angle and a 0.8 mm corner radius provides enhanced edge strength, making it well suited to interrupted and mixed‑operation turning tasks. Can this grade be used for finishing passes? The WPP20G grade offers a balance of toughness and wear resistance; with the 0.8 mm corner radius and proper parameter selection, the insert supports stable finishing on Stahl while still tolerating roughing demands. Which series does the insert belong to and what is the benefit? The insert is part of the Tiger‑tec Gold series; this coating technology improves process security and extends cutting life, reducing the frequency of tool changes in Stahl machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer Walter Tools.
WNMG060408-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger‑tec Gold coating, a chipbreaker designed for stable chip control, and a compact Trigon geometry to increase productivity in steel turning; order inserts quickly via Metav Werkzeuge or consult the technical team for application support. WNMG060408-MP5 WPP05G indexable turning insert – Tiger‑tec Gold, for steel The WNMG060408-MP5 WPP05G is an indexable trigon turning insert with a dedicated chipbreaker and coated carbide grade engineered for efficient machining of steel. Tiger‑tec Gold coating for long tool life WPP05G grade optimised for steel machining MP5 chipbreaker for stable chip control Trigon 80° geometry for flexible turning Boosted productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating with the WPP05G carbide grade delivers measurable improvements in tool life and process stability when machining steels. The coating reduces flank and crater wear under the thermal and mechanical loads typical of steel turning, which translates into fewer indexings and longer uninterrupted cycles. For production environments that require consistent part quality and predictable tool change intervals, this insert supports a higher effective spindle uptime and improved cost per component. Geometry that improves cutting consistency and surface quality The Trigon 80° format and the 0° negative rake geometry reduce vibration and distribute cutting forces in a manner that benefits versatile turning tasks. The nominal 0.8 mm corner radius provides a compromise between strength and finish: it strengthens the cutting edge for medium-depth cuts while still allowing an acceptable surface quality in many finishing passes. These geometric choices result in stable cutting behaviour, lowered risk of edge chipping and a reliable surface finish without constant parameter tuning. Chip control and process reliability for series production Equipped with the MP5 chipbreaker, this indexable insert is designed to form short, controlled chips when cutting steels classified under ISO P. Controlled chip formation reduces the chance of entanglement and improves handling in automated or volume production setups. The combination of chip control and the proven grade promotes high process reliability, which supports repeatable cycle times and makes planning of tool life and inventories more predictable. Clear application range and compatibility Specified for machining steels (ISO P group), the insert’s construction suits a broad range of unalloyed and alloyed steels common in component manufacturing. With tolerance class M and the standard WNMG designation, the insert integrates with established toolholder systems for trigon inserts, facilitating straightforward adoption into existing tool arrays. For engineers and buyers seeking a stable, universally deployable insert for steel-focused operations, this solution balances durability and finish capability. For application advice tailored to specific steels or clamping systems, or to secure Walter Tools WNMG060408-MP5 WPP05G inserts for immediate delivery, contact Metav Werkzeuge’s technical sales at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: WNMG060408-MP5-WPP05G-WALTER Designation: WNMG060408-MP5 WPP05G Product type: Indexable turning insert Manufacturer: Walter Tools Core data Size code: 06 Thickness code: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Geometry: Trigon 80° Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP05G Chipbreaker: MP5 Material suitability: Steel (ISO P) Series: Tiger‑tec Gold FAQ What steels is this insert best suited for? The WNMG060408-MP5 WPP05G insert and its WPP05G grade are optimised for the ISO P group, covering a wide range of unalloyed and alloyed steels typically encountered in machining. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker promotes short, controllable chips during steel turning, which improves process reliability and makes the insert suitable for automated and series production. Can this insert be used for finishing passes? Yes. The 0.8 mm corner radius and the Trigon 80° geometry support good surface quality in many finishing operations while maintaining edge strength for moderate cutting conditions. Is the insert compatible with standard toolholders? The WNMG geometry and tolerance class M conform to common toolholder systems for trigon indexable inserts, enabling easy integration into existing tooling setups. What advantage does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances wear resistance and thermal stability during steel turning, resulting in longer tool life and more consistent component quality. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are used for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is original factory-new merchandise from the manufacturer.
WNMG060408-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, robust geometry and reliable chip control for predictable productivity in steel turning. The insert balances long tool life with consistent surface finish; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. WNMG060408-MP5 WPP10G indexable turning insert — Tiger·tec Gold by Walter Tools The WNMG060408-MP5 WPP10G is a trigon 80° indexable insert designed for steel turning, featuring a negative 0° rake and a wear‑resistant coated carbide grade for productive machining. Tiger·tec Gold coating for extended tool life Designed for steel machining (ISO P) Trigon 80° geometry for stable cutting r0.8 corner radius for consistent edge strength Reliable performance for steel machining that reduces downtime The coated carbide grade WPP10G from the Tiger·tec Gold series delivers high wear resistance and predictable flank life when machining steels (ISO P). Its coating and substrate combination is engineered to withstand the temperatures and chip‑formation behaviour typical for steel turning, which leads to fewer tool changes and more continuous production. The result is measurable efficiency: stable cutting parameters allow process planners to maintain cycle times while reducing unexpected interruptions caused by rapid wear. Geometry and chip control that support stable, accurate turning The trigon 80° geometry, combined with a negative 0° rake and an r0.8 corner radius, provides a stiff cutting edge and improved insert seat stability. This geometry reduces vibration and spreads cutting forces, which enhances tool life and contributes to a consistent surface finish on turned parts. The MP5 chipbreaker is tuned for general steel applications to produce short, controllable chips at a range of feeds, simplifying chip evacuation and protecting workpiece integrity during medium to heavy cuts. Practical benefits for shopfloor productivity and process security Selected for its balance of durability and toughness, this insert grade suits workshops seeking repeatable results across a broad range of steels. The coated carbide grade supports higher cutting speeds compared with uncoated grades, while the stable chip control reduces rework and cleaning time. For production environments the insert offers predictable performance and easier planning of tool exchanges, contributing to overall cost effectiveness and a more reliable machining flow. Contact Metav Werkzeuge for tailored cutting data, availability of genuine Walter Tools WNMG060408-MP5 WPP10G inserts and expert application support. Technical Data SKU: WNMG060408-MP5-WPP10G-WALTER Designation: WNMG060408-MP5 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Plate form: Trigon 80° Free angle: 0° (negative) Corner radius: 0.8 mm Size: 06 Thickness: 04 Tolerance class: M Materials & features Coating / series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP5 Application group: Steel (ISO P) FAQ Which materials are recommended for use with this insert? The WNMG060408-MP5 WPP10G insert is formulated for steel (ISO P); the WPP10G grade and Tiger·tec Gold coating are optimised for the heat and chip formation typical when machining steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP10G grade enhances wear resistance and process security, allowing the insert to maintain edge life under elevated cutting speeds and deliver consistent part quality. How does the trigon 80° geometry affect machining outcomes? The trigon 80° shape increases seat stability and reduces vibration, which supports a more consistent surface finish and longer tool life compared with less rigid geometries. For which cutting scenarios is the MP5 chipbreaker suitable? The MP5 chipbreaker offers balanced chip control for general steel turning at medium feeds and a wide range of cutting depths, optimising chip evacuation and reducing the risk of entanglement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
WNMG060408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a reliable MP5 chipbreaker and the robust Trigon 80° geometry to boost process stability and reduce tool changes; order the turning insert directly via Metav Werkzeuge or request tailored application advice from the technical team. WNMG060408-MP5 WPP20G turning insert (Tiger‑tec Gold) for steel — Walter Tools WNMG060408-MP5 WPP20G is an indexable insert engineered for stable, economical turning of steel components, featuring a coated‑carbide grade and a chipbreaker tuned for predictable chip formation and surface quality Tiger‑tec Gold coated carbide grade WPP20G Optimised MP5 chipbreaker for stable chips Trigon 80° geometry for robust turning 0.8 mm corner radius for edge strength Consistent performance for demanding steel turning The Tiger‑tec Gold coating combined with the WPP20G grade delivers a balance of wear resistance and toughness that is particularly effective for ISO P (steel) machining. The coated carbide substrate is designed to withstand the typical thermal and mechanical loads encountered when turning unalloyed and alloyed steels; this means longer service intervals and more predictable tool life. By selecting a coating and grade tuned to the workpiece group, machining cycles are stabilised and downtime from unexpected insert failures is reduced. Reliable chip control that improves surface finish The integrated MP5 chipbreaker provides consistent chip segmentation and evacuates swarf reliably in a wide range of turning conditions. Controlled chip formation reduces the risk of workpiece damage and minimises secondary operations for cleaning or rework, which supports a higher first‑pass yield. In practice, a properly matched chipbreaker lowers the incidence of built‑up edge and contributes directly to improved surface quality and dimensional repeatability in production environments. Robust geometry for process security A Trigon 80° shape with a 0.8 mm corner radius and a negative relief angle gives the insert mechanical strength where it is needed most. The compact triangular design offers three cutting edges per indexation, while the robust corner radius enhances edge life under interrupted cuts and heavy feed conditions. The negative rake characteristic contributes to stable cutting forces and is particularly useful in operations where rigidity and shock resistance are priorities. Productivity and machining economy in practice Fewer tool changes and longer edge life translate into measurable savings in cycle time and handling costs. The coated‑carbide specification and the chip control strategy reduce flank wear and maintain a consistent cutting edge, so the toolholder and machine utilisation are optimised. When multiple components are produced in series, the combination of coating, grade and geometry leads to a reduced cost per part through reduced scrap, consistent tolerances and less frequent re‑clamping. Clear specification and application guidance for integration Key identifiers such as the series Tiger‑tec Gold, the chipbreaker MP5, and the Trigon 80° form clarify selection for process planners and buyers. The insert is intended for steel machining (ISO P), and the defined features—corner radius, negative relief angle and tolerance class—support reproducible set‑ups. For users seeking confirmation of suitability for a specific workpiece or cutting condition, Metav Werkzeuge provides application advice and supplementary technical data to support process integration. For robust, reliable steel turning with Walter Tools’ Tiger‑tec Gold grade WPP20G, contact Metav Werkzeuge for application recommendations and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG060408-MP5-WPP20G-WALTER Designation: WNMG060408-MP5 ISO designation: WNMG060408-MP5 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Corner radius: 0,8 mm Relief angle: 0° (negative) Insert size: 06 Thickness: 04 Tolerance class: M Special features Shape: Trigon 80° Chipbreaker: MP5 Material group: Steel (ISO P) Coated carbide grade (Tiger‑tec Gold) Execution: G FAQ What materials is this insert designed for? The WNMG060408-MP5 WPP20G indexable insert from Walter Tools is designed primarily for steel machining (ISO P), covering unalloyed and alloyed steels with an emphasis on reliable chip formation. What advantage does the MP5 chipbreaker provide? The MP5 chipbreaker promotes consistent chip segmentation and evacuation, which reduces built‑up edge and helps maintain surface quality and dimensional stability during turning. How does Tiger‑tec Gold improve tool life? The Tiger‑tec Gold coating on the WPP20G grade combines wear resistance and toughness, slowing flank wear under typical steel turning conditions and extending effective cutting time per edge. Why choose a Trigon 80° geometry for turning? The Trigon 80° form offers a robust cutting profile and three usable edges per indexation; when paired with a 0.8 mm corner radius it enhances shock resistance and is well suited to heavier cuts and interrupted cutting scenarios. Is the negative relief angle important for rigidity? Yes, the 0° negative relief angle contributes to higher edge strength and a stable cutting force vector, which supports process security in less rigid set‑ups or when machining interrupted surfaces. Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; no affiliation is implied. The offered article is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
WNMG060408-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WPP30G grade and the MP5 chipbreaker for consistent productivity and reliable chip control; order directly via Metav Werkzeuge or request advice from our consultants. WNMG060408-MP5 WPP30G Trigon 80° turning insert — Tiger‑tec Gold, MP5 chipbreaker (Walter Tools) A WNMG060408-MP5 WPP30G turning insert engineered for productive steel turning, offering coated carbide durability and controlled chip formation in interrupted and continuous cuts Tiger‑tec Gold coating for long tool life MP5 chipbreaker for predictable chip control Trigon 80° form for secure indexation Boosted productivity through wear‑resistant coating The combination of the Tiger‑tec Gold coating and the WPP30G grade gives a significant improvement in wear resistance compared with uncoated grades. The coating reduces flank wear and thermal softening during prolonged cutting, which keeps insert life stable and machining costs predictable. For production environments this means fewer insert changes, less downtime and a more consistent process capability, particularly when machining a wide range of steel (P) grades. Consistent chip control for safer turning operations Equipped with an MP5 chipbreaker, the insert produces short, controlled chips across many cutting conditions. The chipbreaker geometry is designed to support efficient chip evacuation and to reduce the risk of entanglement in both automatic and manual setups. This results in improved surface quality and reduces secondary operations for chip handling, helping workshops maintain higher throughput while keeping the operator environment safer. Secure seating and cutting geometry for reliable results The Trigon 80° outline combined with a 0.8 mm radius ensures stable corner strength and predictable engagement in the cut. The insert’s negative 0° rake offers robustness for heavier cuts and interrupted cuts, making the component suitable for demanding turning tasks. The design also supports fast indexing and repeatable positioning, so tool changeover is straightforward and clamping forces remain consistent for reliable process control. Practical choice for production machinists and toolrooms Specified with tolerance class M and produced as a coated carbide indexable insert, this product integrates into standard turning tool holders that accept the WNMG format. The construction and grade selection favour general steel machining, offering a balance between wear resistance and toughness that fits mixed‑batch production. For engineers seeking a dependable insert that combines longevity with consistent performance, this indexable solution fulfils typical industrial requirements without overcomplication. Speak to Metav Werkzeuge for application advice or to secure the Walter Tools Tiger‑tec Gold inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG060408-MP5-WPP30G-WALTER Name: Drehwendeschneidplatte WNMG060408-MP5 WPP30G Walter Tools Type: Drehwendeschneidplatte Grade: WPP30G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core measurements Plate size: 06 Thickness code: 04 Corner radius: 0.8 mm Free cutting angle: 0° (negative) Tolerance class: M Designs and special features Trigon 80° plate form MP5 chipbreaker Coated carbide (Tiger‑tec Gold) Material application: steel (P) FAQ What materials is this insert suitable for? The insert is designed primarily for steel (P) applications; the WPP30G grade and Tiger‑tec Gold coating are optimised for unalloyed and alloyed steels. How does the MP5 chipbreaker affect cutting performance? The MP5 chipbreaker produces controlled, short chips that improve evacuation and surface finish while reducing the risk of chip entanglement in turning operations. Can this insert handle interrupted cuts? Yes, the negative 0° rake and robust Trigon 80° geometry provide the toughness required for interrupted and heavier cuts. Is the insert compatible with standard WNMG tool holders? The geometry follows the WNMG format and is suitable for holders designed for this insert style; ensure correct clamping and seat condition during installation. What are the benefits of the Tiger‑tec Gold coating? The Tiger‑tec Gold coating increases wear resistance and thermal stability, extending tool life and supporting consistent machining performance across varied steel grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
WNMG060408-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools' Tiger·tec Gold technology, a stable MU5 chipbreaker and robust Trigon geometry for consistent performance when machining rostfreien Stahl; order the WNMG060408-MU5 WMP20G directly via Metav Werkzeuge or consult our specialists for application advice. WNMG060408-MU5 WMP20G — Trigon 80° indexable turning insert, Tiger·tec Gold (Walter Tools) for rostfreien Stahl The WNMG060408-MU5 WMP20G is an 80° trigon indexable insert designed for medium to robust cutting conditions, optimised for reliable machining of rostfreien Stahl. Tiger·tec Gold coating for long tool life Optimised MU5 chipbreaker for stable chips Trigon 80° geometry for versatile turning 0.8 mm corner radius for robust edge strength Reliable cutting performance for rostfreien Stahl The combination of Tiger·tec Gold coating and the WMP20G grade delivers improved wear resistance and thermal stability during stainless machining. The coated cemented carbide is engineered to reduce abrasive and adhesive wear, which means fewer tool changes and a more predictable production schedule. The specification explicitly supports machining of rostfreien Stahl, a group of alloys prone to work hardening and high heat generation; the insert's materials and coating aim to maintain a stable cutting edge under these conditions. Predictable chip control and process stability The MU5 chipbreaker is tailored to promote secure chip formation when turning ductile, heat-sensitive materials. By producing consistent short or segmented chips, the insert reduces the risk of chip entanglement and improves coolant access to the cutting zone. Improved chip behaviour directly supports higher machining reliability and can simplify chip handling at the machine, contributing to shorter cycle times and safer shop-floor operation. Geometry that balances strength and versatility The Trigon 80° form provides a strong cutting edge and is suitable for a range of turning tasks, from roughing to finishing passes within its recommended application window. The 0.8 mm corner radius increases edge robustness for interrupted cuts and heavier engagements, while the 0° (negative) relief supports a stable seating and positive cutting action under radial and axial loads. These geometric choices help maintain consistent surface quality and reduce the likelihood of edge chipping in demanding operations. Practical advantages for production environments For job shops and production lines working with rostfreien Stahl, this insert offers a predictable tool life, consistent workpiece finish and simplified process parameters thanks to its coated grade and chip control geometry. The insert format and code align with standard toolholder systems for quick index changes, supporting leaner tool management. Where reproducible results and throughput matter, the insert's properties aim to reduce downtime and support continuous machining performance. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts, including tooling compatibility and application parameters; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: WNMG060408-MU5-WMP20G-WALTER SKU: WNMG060408-MU5-WMP20G-WALTER Product designation: WNMG060408-MU5 WMP20G Brand: Walter Tools Facts Insert shape: Trigon 80° Corner radius: 0.8 mm Insert size: 06 Thickness: 04 Relief angle: 0° (negative) Chipbreaker: MU5 Special features Series: Tiger·tec Gold Grade: WMP20G Coating: coated cemented carbide Material application: rostfreien Stahl Application range: medium to robust cutting conditions FAQ What materials is this insert suitable for? The WNMG060408-MU5 WMP20G is designed primarily for rostfreien Stahl and performs well under the medium to robust conditions typical of stainless machining. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this Walter Tools insert promotes stable chip formation and safer chip disposal, improving process reliability and surface finish in many stainless applications. Is the Trigon 80° geometry suitable for finishing passes? Yes, the Trigon 80° form provides a balance between strength and precision, allowing the insert to be used for both robust roughing and controlled finishing when set up appropriately. What benefits does the Tiger·tec Gold technology provide? Tiger·tec Gold coating enhances wear resistance and thermal stability, extending edge life and supporting reproducible cutting performance on demanding rostfreien Stahl tasks. Can the insert be used in standard toolholder systems? The WNMG format is compatible with common turning toolholders designed for trigon inserts; correct clamping and seat condition are essential for the best results. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060408-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of a high-performance cutting grade and robust geometry for secure, repeatable turning in stainless steel. The combination of Tiger·tec Silver coating and an MU5 chipbreaker promotes stable chip formation and extended edge life, keeping production consistent and efficient; order via Metav Werkzeuge or consult our specialists for application-specific advice. WNMG060408-MU5 WNMG060408-MU5 WMP20S — Trigon 80° indexable turning insert for stainless steel by Walter Tools A WNMG060408-MU5 WMP20S indexable turning insert designed for machining stainless steel under medium to robust conditions Tiger·tec Silver coated carbide Optimised for stainless steel machining MU5 chipbreaker for stable chips Trigon 80° form, 0.8 mm corner radius Precision coating for consistent cutting performance The Tiger·tec Silver coating combined with a purpose-designed cemented carbide grade delivers a balance between wear resistance and thermal stability. This finish reduces the tendency for edge build-up when machining stainless steel, which often generates heat and work-hardening. As a result, the insert supports longer intervals between tool changes and steadier component tolerances. The coated substrate enables reliable cutting behaviour across varying feeds, helping to maintain throughput while protecting the cutting edge. Geometry tuned for repeatable surface quality The Trigon 80° form together with a 0° negative relief and a 0.8 mm corner radius creates a robust cutting edge that resists chipping during interrupted cuts and heavy engagement. This geometry favours dimensionally stable turning and a consistent surface finish on challenging alloys. The shape also allows flexible mountings in standard toolholders; the insert profile gives predictable cutting forces, which simplifies fixture and toolholder selection for production environments aiming for reproducible results. Chip control that increases process security Equipped with the MU5 chipbreaker, the insert promotes controlled chip formation even under the high-temperature conditions typical for stainless steel. Stable chip flow reduces the risk of entanglement and improves machine uptime, which translates into higher net productivity on long machining cycles. The chipbreaker design works in concert with the coated grade to maintain a stable cutting edge, supporting safer unattended runs and easier chip handling in automated cells. Practical compatibility for everyday workshop use This indexable turning insert is supplied in the common WNMG size series and matches the ISO designation shown on the product label, allowing direct replacement in many existing toolholders. The compact format and robust coating make it suitable for a wide range of turning tasks in small-to-medium batch production and repair work. Production planners will appreciate the predictable behaviour when integrating this insert into established processes, while operators benefit from straightforward handling and reliable edge performance. For application advice specifically for Walter Tools’ Tiger·tec Silver grade and to discuss suitable toolholders or cutting parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to receive tailored recommendations and swift delivery support Technical data SKU: WNMG060408-MU5-WMP20S-WALTER Article designation: WNMG060408-MU5 WMP20S Product type: indexable turning insert Manufacturer: Walter Tools Core specifications Insert size: 06 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Trigon 80° Chipbreaker: MU5 Grade: WMP20S Tolerance class: M Features Coating/series: Tiger·tec Silver Carbide family: coated cemented carbide Material suitability: stainless steel Intended use: medium to robust cutting conditions Label: Drehwendeschneidplatte WNMG060408-MU5 WMP20S FAQ Which materials is this insert suited for? The WNMG060408-MU5 WMP20S from Walter Tools is specified for stainless steel and performs under medium to robust stainless-steel turning conditions. What does the MU5 chipbreaker provide? The MU5 chipbreaker on the WNMG060408-MU5 WMP20S promotes stable chip formation, improving process security and reducing chip-related disruptions during turning. How does the Tiger·tec Silver grade affect tool life? The Tiger·tec Silver coating supports thermal stability and wear resistance on stainless steel, helping to extend edge life and maintain consistent cutting performance. Is the Trigon 80° shape suitable for roughing and finishing? Yes; the Trigon 80° form with a 0.8 mm corner radius offers a robust edge for roughing while still enabling good surface quality, making the insert versatile across turning operations. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected brand names and trademarks are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only and do not indicate any affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
WNMG060408-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger‑tec Gold cutting grade and a robust Trigon 80° geometry for productive steel turning; the WPP10G grade and MU5 chipbreaker combine to deliver stable chip control and long tool life. Order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG060408-MU5 WPP10G indexable turning insert — Tiger‑tec Gold, Trigon 80°, Walter Tools A high-performance WNMG060408‑MU5 WPP10G indexable turning insert engineered for reliable steel machining with a Trigon 80° form and Tiger‑tec Gold coating Tiger‑tec Gold coating for improved edge life WPP10G grade optimised for steel machining Trigon 80° form with 0.8 mm corner radius MU5 chipbreaker for predictable chip control Achieve longer tool life and consistent productivity The combination of the Tiger‑tec Gold coating and the WPP10G cutting grade provides notable wear resistance and thermal stability during continuous turning operations. The coated cemented carbide composition of the grade is optimised for the heat and chip formation typical of steel machining, which means fewer unscheduled insert changes and less machine downtime. In practical terms, shops benefit from extended service intervals and a more predictable tool‑life curve, improving overall process efficiency and cost control. The insert’s design supports stable cutting under a variety of feeds and speeds while maintaining reproducible performance. Stable chip control and reliable surface quality The MU5 chipbreaker is tuned to produce short, controlled chips in many common turning scenarios, reducing the risk of chip entanglement and improving swarf evacuation. Combined with the Trigon 80° plate form and 0° negative rake, the geometry enhances insert strength for heavier cuts and interrupted cuts while still permitting good surface finish. The 0.8 mm corner radius contributes to edge robustness and helps achieve consistent part tolerances and improved surface integrity. For operators unfamiliar with chipbreaker types: MU5 is designed to balance chip segmentation and flow for general steel turning applications. Easy integration into production and clear specifications Tolerance class M and the standard WNMG configuration make the insert compatible with common toolholders and clamping systems, simplifying inventory and setup. The plate thickness and size correspond to established tooling systems, supporting rapid replacement and minimising setup time. The robust negative rake and the Trigon form support a wide range of turning tasks — from roughing to semi‑finishing — enabling a single insert type to cover multiple operations. For planning, note the series designation and grade to match cutting data from tooling tables or supplier recommendations; this supports reproducible process parameters and efficient tool‑life management. For machining demanding steels, contact Metav Werkzeuge for tailored recommendations on the WNMG060408‑MU5 WPP10G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutting data and application specifics. Technical Data Article number: WNMG060408-MU5-WPP10G-WALTER Designation: WNMG060408-MU5 Series: Tiger-tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Size: 06 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: MU5 Plate form: Trigon 80° Material code: P (suitable for steel per ISO 513) Application focus: steel machining FAQ What steels is this insert suitable for? The WNMG060408‑MU5 WPP10G is developed for machining a broad range of steel grades; the WPP10G composition copes well with the heat and chip characteristics typical of unalloyed and alloyed steels. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating increases thermal and abrasive resistance on the cutting edge, resulting in longer tool life and more consistent component quality when using the insert in demanding turning operations. When is the MU5 chipbreaker recommended? The MU5 chipbreaker is recommended for general turning of steel where controlled, short chips and reliable swarf evacuation are priorities, especially in medium to heavy turning passes. Does the Trigon 80° form add any specific advantage? The Trigon 80° geometry combines good edge strength with multi‑directional clearance, making the insert suitable for versatile turning tasks and offering robustness in interrupted cuts. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG060408-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating and a precise MU5 chipbreaker for stable chip formation and longer tool life; the result is reliable, productive steel turning that keeps machining consistent and cost‑effective — contact Metav Werkzeuge for technical details or selection support. WNMG060408-MU5 WPP20G — Indexable turning insert for steel, Walter Tools WNMG060408-MU5 WPP20G is an indexable turning insert designed for conventional and high‑productivity steel machining applications Tiger·tec Gold coating for extended tool life Trigon 80° geometry with 0.8 mm corner radius MU5 chipbreaker for reliable chip control Suitable for unalloyed and alloyed steel turning Improved process reliability through coating and grade The combination of the Tiger·tec Gold series and the WPP20G grade provides a coated carbide solution optimised for steel (ISO P). This arrangement enhances wear resistance and promotes stable chip formation, which reduces the frequency of index changes and supports uninterrupted production. The coated substrate and P‑class tuning mean that the insert copes well with the thermal and mechanical demands of steel turning, delivering longer effective tool life and more predictable results for batch and continuous operations. Consistent chip control and surface quality The MU5 chipbreaker paired with the Trigon 80° geometry and 0° negative rake produces manageable chips and good tool engagement in typical steel cutting conditions. The 0.8 mm corner radius helps maintain edge strength while enabling a fine surface finish on the workpiece. Together, these features reduce the likelihood of built‑up edge and minimise vibration in interrupted cuts, translating into fewer reworks and improved first‑pass component quality for turned parts. Practical compatibility and economical performance With ISO P suitability, tolerance class M, insert size 06 and thickness 04, this insert fits common turning toolholders and is appropriate for a wide range of unalloyed and alloyed steels. The Trigon form gives robust seating in the pocket and allows multiple effective cutting edges per index, improving cost per edge. Intended for indexable turning operations, the insert supports stable productivity and easier tool management on the shop floor, contributing to predictable machining cycles and lower overall tooling costs. For special cutting conditions, the grade’s balanced toughness and wear resistance make it a versatile choice in production and repair shops alike. For tailored recommendations on tooling setups with the Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge for application advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG060408-MU5-WPP20G-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Facts Corner radius: 0.8 mm Free cutting angle: 0° (negative) Insert size: 06 Thickness: 04 Tolerance class: M Special features Geometry: Trigon 80° Chipbreaker: MU5 Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) Material code: P Designation: WNMG060408-MU5 FAQ What materials is this insert suitable for? The WNMG060408-MU5 WPP20G insert from Walter Tools is designed primarily for steel machining (ISO P), covering unalloyed and alloyed steels with balanced wear and toughness. How does the MU5 chipbreaker affect performance? The MU5 chipbreaker on this Walter Tools grade promotes controlled chip formation and evacuation, which contributes to improved surface finish and more consistent cycle times during turning operations. Is the insert compatible with standard toolholders? Yes, the insert’s Trigon 80° form and insert size 06 are compatible with common turning toolholders designed for WNMG‑style indexable inserts. What benefits does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and thermal stability, extending the insert’s service life and improving process reliability in steel turning. Can this insert be used for interrupted cuts? The combination of 0.8 mm corner radius and the insert’s grade gives enhanced edge strength, making it suitable for many interrupted turning applications in steel where edge robustness is required. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060408-MU5 WSM20S MU5 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating combined with the MU5 chipbreaker and robust Trigon 80° geometry for stable edges and reliable chip control when machining stainless steels and heat‑resistant superalloys; order the WNMG060408‑MU5 WSM20S indexable turning insert through Metav Werkzeuge or consult the technical team for application advice. WNMG060408-MU5 WSM20S indexable turning insert — Trigon 80°, for stainless steels and superalloys — Walter Tools A WNMG060408‑MU5 WSM20S indexable turning insert designed for secure chip formation and long tool life when machining tough, heat‑sensitive materials such as stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S). Tiger‑tec Silver coated carbide WSM20S MU5 chipbreaker for secure chip control Trigon 80° geometry, 0.8 mm nose radius 0° (negative) relief for robust cutting edges Optimised cutting performance for demanding materials The combination of the Tiger‑tec Silver coating and the WSM20S carbide grade is engineered to resist heat and reduce flank adhesion when machining stainless steels and superalloys. The coating increases thermal resistance and lowers friction at the cutting zone, which supports stable cutting edges and longer tool life. For operators and production planners, this means fewer index changes, more consistent component quality and reduced downtime in serial turning operations. The insert’s suitability for ISO groups M and S is reflected in the substrate and coating design, which together promote controlled wear rather than catastrophic edge failure. Geometry and chip control that protect surface finish and productivity The Trigon 80° shape with a 0.8 mm corner radius and the MU5 chipbreaker deliver a balance between edge strength and chip segmentation. The negative 0° relief angle enhances edge robustness, making the insert less prone to chipping under interrupted cuts or heavy cross‑sections. The MU5 chipbreaker is optimised to form short, controllable chips in tough alloys, which reduces the risk of entanglement and improves safety at the machine. Improved chip control also helps maintain a consistent surface finish and reduces the need for secondary operations. Practical benefits for workshop efficiency and process reliability As a coated, indexable solution, the insert simplifies inventory and tool management: stock of one grade covers a broad range of stainless and heat‑resistant materials, while the standard WNMG format allows fast seat changes in compatible holders. The design supports predictable tool wear, which aids tool‑life planning and cost forecasting in production. For projects requiring process assurance, the combination of coating technology and geometry contributes to repeatable results, lower scrap rates and higher throughput — attributes that matter in small‑batch and large‑scale turning alike. For tailored recommendations on using Walter Tools Tiger‑tec Silver inserts like the WNMG060408‑MU5 WSM20S, contact Metav Werkzeuge for application support and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WNMG060408-MU5-WSM20S-WALTER Type: indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Facts Tolerance class: M Relief angle: 0° (negative) Corner radius: 0.8 mm Insert size: 06 Thickness code: 04 Shape: Trigon 80° Special features Chipbreaker: MU5 Coating: Tiger‑tec Silver (coated carbide) Applicable materials: stainless steels (ISO M), heat‑resistant superalloys and titanium (ISO S) Execution code: G ISO designation: WNMG060408‑MU5 WSM20S FAQ What materials is this insert best suited to machine? The WNMG060408‑MU5 WSM20S insert is optimised for stainless steels (ISO M) and heat‑resistant superalloys (ISO S); the Tiger‑tec Silver coating and substrate enable good heat resistance and stable cutting under the conditions typical for these groups. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on the insert promotes short, manageable chips and improved evacuation during turning operations, which supports surface quality and reduces the risk of chip interference at the tool tip. Can the Trigon 80° form deliver good edge strength for interrupted cuts? Yes — the trigon geometry combined with a 0.8 mm nose radius and the negative 0° relief enhances edge robustness, making the insert suitable for operations with intermittent engagement or heavier cross‑sections. Is this insert compatible with standard WNMG tool holders? The WNMG format conforms to the common WNMG seat dimensions; compatibility depends on the specific holder and clamping system, but the insert follows standard WNMG codes for straightforward replacement. What benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver increases thermal resistance and reduces friction at the cutting interface, which helps to limit built‑up edge and extend edge life when machining tough, heat‑sensitive materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark owners. The item offered is an original, factory‑new product from the manufacturer.
WNMG060408-MW5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Silver coating, a Trigon 80° geometry and the MW5 chipbreaker for reliable, productive machining of cast iron components; order via Metav Werkzeuge or consult their application specialists for process optimisation. WNMG060408-MW5 WKK10S Trigon 80° turning insert – Tiger·tec Silver, Walter Tools A WNMG060408-MW5 WKK10S turning insert designed for productive machining of cast iron parts, offering stable chip formation and extended tool life in demanding turning operations Tiger·tec Silver coating for long tool life Optimised for cast iron machining Trigon 80° geometry for rigid turning MW5 chipbreaker for controlled chip formation Higher productivity through geometry matched to cast iron The Trigon 80° geometry provides a robust cutting edge and improved engagement stability, which reduces chatter on interrupted cuts and heavy cross-sections. Combined with the MW5 chipbreaker, this geometry delivers stable chip formation and predictable machining behaviour when working with abrasive and brittle materials such as cast iron. The result is fewer interrupted cycles for rework and a more efficient production flow, especially in batch or serial turning. Consistent surface quality and process reliability The negative 0° rake setting produces a strong cutting edge that resists edge chipping under intermittent loading. The 0.8 mm corner radius contributes to a defined cutting footprint, enabling consistent surface finish and dimensional repeatability. These characteristics make the insert particularly suitable for finishing and semi-finishing passes where dimensional control and component appearance are priorities. Coating technology that extends tool life The combination of the WKK10S grade with Tiger·tec Silver coating is engineered to withstand the abrasive wear typical of cast iron turning. The coating reduces flank wear and improves heat resistance, resulting in longer tool life and fewer indexings. For operations where reducing tool-change downtime is important, the coated grade provides a measurable improvement in productivity and overall process economy. Practical application notes for the workshop The insert’s Trigon 80° form and stable chip control simplify insert handling and reduce the need for frequent process adjustments. For best results, pair the insert with a rigid toolholder and appropriate cutting parameters for cast iron; moderate cutting speeds and chip-thinning strategies often yield the best compromise between productivity and edge life. The indexable design eases replacement and maintains consistent orientation for reproducible results across multiple components. Contact Metav Werkzeuge for tailored machining recommendations and to request the WNMG060408-MW5 WKK10S inserts for optimised cast iron turning with Tiger·tec Silver performance Technical Data Article number: WNMG060408-MW5-WKK10S-WALTER Designation: WNMG060408-MW5 WKK10S Series: Tiger·tec Silver Grade: WKK10S Manufacturer: Walter Tools Product type: turning insert Dimensions & Geometry Insert size: 06 Thickness code: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Plate form: Trigon 80° Tolerance class: M Features & Applications Coating technology: Tiger·tec Silver Chipbreaker: MW5 Suitable for: cast iron Geometry benefits: rigid engagement, good stability Intended use: finishing / semi-finishing in cast iron FAQ What materials is this insert optimised for? The WNMG060408-MW5 WKK10S insert is optimised for cast iron applications; the WKK10S grade and Tiger·tec Silver coating address the abrasive wear and chip behaviour typical of these materials. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker promotes short, controllable chips and consistent evacuation, improving process security and reducing the risk of built-up edge when turning cast iron with the WNMG060408-MW5 WKK10S insert. Is the Trigon 80° form suitable for interrupted cuts? Yes. The Trigon 80° geometry provides a stronger cutting edge and greater rigidity, making the insert well suited to interrupted cutting conditions and unstable setups. What performance gains can be expected with Tiger·tec Silver? The Tiger·tec Silver coating increases resistance to abrasive wear and heat, extending the tool life of the WKK10S grade and lowering the frequency of indexings in serial production. Can this insert be used for finishing operations? The combination of 0.8 mm corner radius and robust geometry delivers consistent surface finish and dimensional control, making the insert a good choice for finishing and semi-finishing passes in cast iron turning. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for clarification. There is no affiliation between our company and the brands named. The offered item is original, factory-new.
WNMG060408-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coated carbide, a robust Trigon 80° geometry and a 0.8 mm corner radius for stable chip formation and extended tool life; order the WNMG060408-MW5 WPP10G turning insert directly via Metav Werkzeuge or consult our advisors for application support. WNMG060408-MW5 WPP10G turning insert — Trigon 80°, Tiger·tec Gold coating — Walter Tools WNMG060408-MW5 WPP10G is a Trigon 80° turning indexable insert optimised for steel machining, combining a coated carbide grade with a defined corner radius for reliable metalcutting performance Tiger·tec Gold coated carbide for extended tool life Trigon 80° geometry for robust turning 0.8 mm corner radius for stable chip formation Negative 0° clearance with MW5 chipbreaker High-performance wear resistance that boosts productivity The Tiger·tec Gold coating together with the WPP10G carbide grade delivers a clear production advantage: high wear resistance with maintained edge strength under the thermal and mechanical loads typical of steel turning. The coated grade is designed to reduce flank and crater wear, extending tool life and lowering tool-change frequency. This improves process economy and makes uninterrupted batch runs more achievable in daily workshop or shopfloor use. Reliable chip control and improved surface finish The MW5 chipbreaker and Trigon 80° form provide consistent chip flow and predictable breakage, which reduces the risk of built-up edge and enhances operator safety. The 0.8 mm corner radius helps to stabilise cutting forces and supports a steady cutting edge for improved surface quality. Negative relief at 0° increases insert strength for interrupted cuts and heavy-duty operations, giving higher process security when facing variable workpiece conditions. Specifically engineered for steel machining This indexable insert is tailored for steel (ISO group P) applications: the grade reacts to the heat generation and chip characteristics typical of unalloyed and alloyed steels, offering a balanced mix of wear resistance and toughness. The engineering behind the grade supports consistent chip formation and repeatable results across a wide range of steel grades, helping to maintain dimensional accuracy and reduce scrap rates in serial production. Easy integration and dependable manufacturing tolerances Manufactured to tolerance class M, the insert provides dependable seating and repeatability in compatible toolholders. The standard WNMG form and the clear designation facilitate quick identification and seamless integration into existing tooling systems. Using a consistent, coated carbide grade reduces set-up variation and supports process standardisation, which in turn simplifies inventory management and tool selection for turning operations. For ordering, technical queries or application recommendations for Walter Tools inserts such as the WNMG060408-MW5 WPP10G, please contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: WNMG060408-MW5-WPP10G-WALTER Designation: WNMG060408-MW5 WPP10G Type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Trigon 80° Plate size: 06 Thickness: 04 Special features Grade: WPP10G (coated carbide) Chipbreaker: MW5 Tolerance class: M Application group: Steel (ISO P) Coating technology: Tiger·tec Gold FAQ What materials is this insert suitable for? The WNMG060408-MW5 WPP10G from Walter Tools is designed for steel machining (ISO group P) and is optimised for the heat and chip behaviour typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP10G grade reduces wear and improves thermal resistance, which extends cutting edge life and maintains dimensional stability over longer cycles. Is this insert suitable for interrupted cuts? Yes. The negative 0° relief and the robust Trigon geometry increase insert strength, making it well suited to interrupted cuts and applications with variable cutting engagement. What advantage does the MW5 chipbreaker provide? The MW5 chipbreaker promotes controlled chip formation and breakage, reducing the likelihood of entangling chips and contributing to a safer, more consistent machining process. Can this insert be used in standard WNMG toolholders? The insert follows WNMG form standards and tolerance class M, enabling straightforward use in compatible turning toolholders designed for WNMG inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060408-MW5 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP20G grade delivers consistent productivity and reliable edge life in steel turning operations; the insert’s Trigon 80° form and MW5 chipbreaker further ensure stable chip control and process security. Order supply or discuss application specifics via Metav Werkzeuge for tailored recommendations. WNMG060408-MW5 WPP20G turning insert – Trigon 80°, Tiger‑tec Gold (Walter Tools) The WNMG060408-MW5 WPP20G is a negative‑rake, trigon indexable turning insert optimised for efficient machining of steel components. Tiger‑tec Gold coating for extended tool life Trigon 80° geometry for stable turning 0.8 mm corner radius for robust edge strength Optimised MW5 chipbreaker for steel machining Maximise throughput and lower cost per part with a coated grade built for steel The coated‑carbide grade WPP20G, based on the Tiger‑tec Gold technology, is designed to balance wear resistance and toughness when machining steel. The coating reduces flank wear and improves resistance to built‑up edge, which directly extends tool life and reduces tool‑change frequency. For production environments seeking predictable output, this combination supports a lower cost per finished component while maintaining surface quality and repeatability. Stable machining thanks to engineered chip control and geometry The MW5 chipbreaker is developed for consistent chip formation when working typical steel alloys (ISO group P). By promoting short, segmented chips and reliable evacuation, the chipbreaker reduces the risk of chatter and tool interference with the workpiece. The negative 0° relief and the insert’s geometry contribute to process stability, especially in interrupted cuts or heavy roughing passes, improving cycle time without compromising safety. Robust edge and form for demanding turning tasks The Trigon 80° insert shape provides a rigid support base in the toolholder, enabling higher feed and depth‑of‑cut capability compared with more acute geometries. The 0.8 mm corner radius offers a compromise between strength and finishing capability: the edge resists edge chipping under higher loads while still permitting satisfactory surface finish when used in finishing passes. The insert’s tolerance class M implies consistent dimensional accuracy for secure clamping and repeatable installation. Application scope and handling recommendations for workshop use Marked for ISO group P (steel), this insert is suitable for unalloyed and alloyed steels where a balance of wear resistance and toughness is required. The combination of coated carbide substrate and the Tiger‑tec Gold coating means it is especially effective in general turning, shoulder work and medium to heavy roughing where chip control and tool life are priorities. For best results, pair the insert with a suitable WNMG toolholder and verify seat and clamp condition to ensure stable support and correct rake alignment. For fast supply or application advice on the Walter Tools WNMG060408‑MW5 WPP20G insert, contact Metav Werkzeuge for tailored recommendations and order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: WNMG060408-MW5-WPP20G-WALTER Product label: Drehwendeschneidplatte WNMG060408-MW5 WPP20G Walter Tools Manufacturer/brand: Walter Tools Facts Insert shape: Trigon 80° Size designation: 06 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G Series/coating technology: Tiger‑tec Gold Chipbreaker: MW5 Substrate: coated carbide Material application: P (steel) Execution: G FAQ What steels is this insert suited for? The WNMG060408‑MW5 WPP20G insert is formulated for ISO group P materials; the WPP20G grade and Tiger‑tec Gold coating provide wear resistance and toughness appropriate for unalloyed and alloyed steels. Can the insert handle interrupted cuts or roughing passes? Yes. The negative relief (0°) and the 0.8 mm corner radius, together with the Trigon 80° form, give the insert robust edge support and stability for interrupted cuts and heavier roughing operations. Which chip behaviour can be expected with the MW5 chipbreaker? The MW5 chipbreaker on this insert promotes short, controlled chips during turning of steels, improving evacuation and reducing the likelihood of entanglement or workpiece damage. Is this insert suitable for finishing to a high surface quality? The insert can achieve good surface finishes when used with appropriate feeds and speeds; however, the emphasised strength and chip control make it particularly advantageous for productive roughing and semi‑finishing in steel turning. Manufacturer: Walter Tools; Walter AG (brand: Walter Tools), head office Tübingen, part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. The referenced brand is named for clarification and does not imply any commercial affiliation.
WNMG060408-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and a robust Trigon 80° geometry that secures chip control and tool life when machining rostfreie Stähle and high-temperature alloys; order Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application advice. WNMG060408-NMS WSM10S indexable turning insert – Walter Tools, Tiger·tec Silver, for rostfreie Stähle and superalloys WNMG060408-NMS WSM10S is an indexable turning insert designed for demanding finishing and semi-finishing of tough materials, offering a coated carbide grade tailored for heat-resistant alloys and stainless steels. Tiger·tec Silver coating technology Grade WSM10S for tough materials Trigon 80° form, corner radius 0.8 NMS chipbreaker with 0° negative rake High-temperature stability for consistent material removal The Tiger·tec Silver coating in the WSM10S grade provides enhanced heat resistance and a wear-resistant cutting edge, which contributes to longer tool life and fewer interruptions on the shop floor. Designed specifically for materials categorised under ISO group S (heat-resistant superalloys and titanium) and M (rostfreie Stähle), this insert maintains stable chip formation under thermal stress. By reducing flank wear and edge degradation, the coating supports predictable performance and helps to keep process costs down through extended tool-change intervals and improved first-pass yields. Geometry and edge integrity that improve productivity The Trigon 80° plate form combined with a corner radius 0.8 and 0° negative rake gives mechanical strength at the cutting edge and reliable deflection resistance in interrupted cuts. The NMS chipbreaker optimises chip control for both continuous and segmented chips, reducing the risk of built-up edge and improving surface finish. These geometric choices translate into measurable shop-floor benefits: fewer reworks, more consistent component tolerances and stable cycle times, which all support higher overall equipment effectiveness. Practical fit for standard toolholders and predictable process security With the standard WNMG size format and a plate thickness that suits common toolholders, this coated insert integrates easily into existing tooling systems. The WSM10S grade is intended for operators who require a balance between edge stability and economy when processing rostfreie Stähle and superalloys. Tolerance class M signals a consistent manufacturing quality that supports repeatable indexing and fixture mounting. For production runs where process security and surface integrity matter, this insert offers a pragmatic combination of performance and availability from a reputable manufacturer. For secure machining of rostfreie Stähle and superalloys, contact Metav Werkzeuge for tailored application support and prompt supply of Walter Tools WNMG060408-NMS WSM10S inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG060408-NMS-WSM10S-WALTER Designation: WNMG060408-NMS WSM10S Series: Tiger·tec Silver Manufacturer: Walter Tools Product type: Indexable turning insert Facts Plate form: Trigon 80° Plate size: 06 Thickness: 04 Free rake: 0° (negative) Corner radius: 0.8 Tolerance class: M Special features Grade: WSM10S (coated carbide) Chipbreaker: NMS Material suitability: S / M Execution: G FAQ Which materials is this insert designed for? The WSM10S grade is formulated for machining rostfreie Stähle (ISO group M) and heat-resistant alloys/titanium (ISO group S), offering stability where high temperatures and material toughness challenge the tool. What advantages does the Trigon 80° form provide? The Trigon 80° geometry concentrates cutting forces into a robust edge, and with a corner radius of 0.8 it gives reliable resistance to deflection and improved surface quality on interrupted and continuous cuts. How does the Tiger·tec Silver coating help in practice? Tiger·tec Silver on the WSM10S grade increases thermal resistance and reduces flank wear, resulting in longer tool life and more consistent machining when processing difficult-to-cut materials. Is this insert compatible with standard WNMG toolholders? Yes; the WNMG060408-NMS format is a standard indexable insert size and fits typical WNMG toolholders; the SKU for ordering is WNMG060408-NMS-WSM10S-WALTER. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is a brand of Walter AG, a global manufacturer of precision tools and part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
WNMG060408-NMS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver edge stability, robust Trigon 80° geometry and targeted suitability for stainless steels and heat‑resistant alloys to keep machining reliable and predictable. Order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge's technical advisors for process optimisation. WNMG060408-NMS WSM20S — Trigon 80° turning insert, Tiger·tec Silver coating | Walter Tools A WNMG060408-NMS WSM20S turning indexable insert engineered for secure, high‑contact turning of rostfreie Stähle and heat‑resistant alloys in demanding production environments Tiger·tec Silver coating for edge stability Optimised for stainless and superalloys Trigon 80° geometry for secure clamping Corner radius 0.8 mm for consistent chips Stable cutting for tough, heat‑generating materials The coated carbide grade in the Tiger·tec Silver family provides a balanced combination of wear resistance and thermal stability, making it especially suitable for machining rostfreie Stähle (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). The Trigon 80° insert shape increases the contact area with the toolholder, improving clamping security and reducing vibration in interrupted or heavy cuts. With a negative 0° free rake, the geometry prioritises edge robustness and predictable cutting forces, which supports consistent component tolerances and fewer scrap parts. Better chip control and fewer process interruptions Built with an NMS chipbreaker and a corner radius of 0.8 mm, this insert promotes controlled chip formation under challenging cut conditions. The chipbreaker geometry reduces the tendency for built‑up edge on sticky or work‑hardening alloys and ensures chips are broken and evacuated reliably. Improved chip behaviour not only shortens cycle times by lowering the risk of tool jams, but it also limits heat concentration at the cutting zone, extending effective cutting life and reducing the frequency of unplanned tool changes. Integrates into production for higher uptime and repeatability Tolerance class M and the standardised insert size and thickness enable fast replacement and repeatable positioning in common toolholders, so machining centres and lathes regain productivity quickly during service intervals. The coated cemented carbide composition and the Tiger·tec Silver technology mean longer effective tool life under high thermal load, which translates into fewer tool changes and lower overall operating hours per component. For process planners, this results in measurable gains in throughput and reduced rework rates without compromising surface quality. For reliable machining results with stainless steels and superalloys, contact Metav Werkzeuge for tailored recommendations, sample availability or application data at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing tool systems Technical data Article number: WNMG060408-NMS-WSM20S-WALTER Designation: WNMG060408-NMS Grade: WSM20S Series: Tiger-tec Silver Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert size: 06 Plate thickness: 04 Corner radius: 0.8 mm Free rake angle: 0° (negative) Geometry: Trigon 80° Chipbreaker: NMS Tolerance class: M Special features Coating: Tiger·tec Silver (coated cemented carbide) Material suitability: S / M Application: machining of rostfreie Stähle and heat‑resistant alloys Execution: G FAQ What materials is this insert optimised for? The WNMG060408-NMS WSM20S insert is optimised for rostfreie Stähle (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), combining thermal resistance and edge stability for these challenging materials. How does the Trigon 80° shape affect clamping and wear? Trigon 80° geometry increases the contact area in the toolholder, which improves clamping security and distributes cutting forces to reduce localised wear on the insert edge. What role does the NMS chipbreaker play in production? The NMS chipbreaker promotes predictable chip formation and evacuation, lowering the risk of built‑up edge and machine stoppages, which helps maintain continuous production. Is the insert suitable for interrupted cuts or heavy roughing? Yes. The negative 0° rake and robust grade make the insert well suited to interrupted cuts and heavier roughing operations where edge strength is essential. How does the Tiger·tec Silver coating improve tool life? Tiger·tec Silver coating enhances thermal stability and wear resistance, which reduces flank wear rates and extends tool life under high cutting temperatures and abrasive conditions. Manufacturer: Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060408-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting performance and consistent chip control for reliable stainless steel turning. Benefit from high process security and long tool life thanks to the Tiger‑tec Gold grade; order through Metav Werkzeuge or ask their consultants for tailored tooling advice. WNMG060408-RM5 WMP20G indexable turning insert – Trigon 80°, Tiger‑tec Gold for stainless steel | Walter Tools The WNMG060408-RM5 WMP20G is a Trigon 80° indexable insert engineered for dependable machining of stainless steel in medium to robust cutting conditions Tiger‑tec Gold coating for stable cutting performance Optimised RM5 chipbreaker for reliable chip control Trigon 80° geometry with 0.8 mm corner radius Designed for stainless steel (ISO M) machining High process reliability for stainless steel machining The WNMG060408-RM5 WMP20G insert is based on the Tiger‑tec Gold technology, a coated carbide solution developed to address the specific challenges of stainless steel (ISO M). The composition and coating promote stable cutting edges and reduce the tendency for built‑up edge formation, which in turn lowers rework rates and improves cycle consistency. For production environments that require predictable tool life and steady surface quality, this grade offers a clear advantage by supporting continuous, productive machining under medium to robust conditions. Geometry that increases edge strength and productivity The Trigon 80° shape combined with a 0.8 mm corner radius and a negative 0° rake provides mechanical strength at the cutting edge and stability in interrupted or heavy cuts. This geometry reduces stress concentrations and supports higher feed rates without sacrificing finish quality. The insert thickness and standardised form ensure compatibility with common holders, simplifying tool management and enabling quick index changes to maintain uptime and throughput. Controlled chips and improved surface finish The RM5 chipbreaker is optimised to produce compact, controllable chips during turning of tough, ductile alloys like austenitic stainless steels. Effective chip control reduces the risk of chip entanglement and minimises manual clearing, which contributes to a safer, more efficient shopfloor. At the same time, the combined effect of the coating and chipbreaker assists in achieving a consistent surface condition, reducing downstream polishing or grinding operations. Practical integration and application benefits As an indexable turning insert, this grade is suitable for a wide range of workshop applications where processing stainless steel is routine. The WMP20G grade delivers a balance of wear resistance and edge toughness, making it practical for batch production and jobbing alike. Stocking this insert supports flexible machining strategies and cost‑effective tooling cycles, while its standardised designation facilitates quick ordering and inventory control. For reliable stainless steel turning with Walter Tools' Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored tooling advice and swift supply – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: WNMG060408-RM5-WMP20G-WALTER Article designation: WNMG060408-RM5 WMP20G Type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series/Grade: Tiger‑tec Gold / WMP20G Facts Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 06 Plate thickness: 04 Plate form: Trigon 80° Tolerance class: M Special features Chipbreaker: RM5 Coating/grade: WMP20G (Tiger‑tec Gold, coated carbide) Material application: stainless steel (ISO M) Suitable for medium to robust cutting conditions Walter Tools brand FAQ What materials is this insert intended for? The WNMG060408-RM5 WMP20G indexable turning insert from Walter Tools is designed primarily for stainless steel (ISO M) applications, offering stable edge behaviour in ductile, heat‑generating alloys. What is special about the WMP20G grade? The WMP20G grade uses Tiger‑tec Gold coating on a coated carbide substrate to combine wear resistance with edge toughness, which supports consistent performance when turning stainless steel. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker produces compact, manageable chips and promotes consistent chip flow during turning operations, improving safety and reducing interruptions in production when using this Walter Tools insert. Which geometry features support heavy or interrupted cuts? The Trigon 80° form with a 0.8 mm corner radius and a negative 0° rake increases edge strength and stability, making the insert suitable for more demanding turning tasks without immediate edge breakage. Is this insert compatible with standard tool holders? Yes, the WNMG060408-RM5 designation corresponds to a standard indexable insert form that fits commonly used turning toolholders, simplifying tool changes and inventory management. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. They are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG060408-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of a high-performance coated carbide grade and a proven chipbreaker geometry for stable machining of rostfreier Stahl; the combination reduces process variability and supports longer cutting edge life. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. WNMG060408-RM5 WMP20S Turning indexable insert, Trigon 80°, for rostfreier Stahl — Walter Tools The WNMG060408-RM5 WMP20S is a negative‑rake, Trigon 80° turning insert engineered for medium to robust turning of rostfreier Stahl, combining the Tiger·tec Silver coating technology with an RM5 chipbreaker for controlled chip formation. Tiger·tec Silver coating for enhanced wear resistance Optimised RM5 chipbreaker for secure chip control Trigon 80° form with 0.8 mm corner radius Negative 0° rake for robust turning operations Consistent performance for demanding rostfreier Stahl machining The coated carbide grade WMP20S, part of the Tiger·tec Silver family, is developed to manage the typical challenges of rostfreier Stahl: high toughness, built‑up edge tendency and elevated cutting temperatures. The advanced coating supports a stable cutting edge under medium to robust operating conditions, which translates into reliable chip formation and improved process consistency. This results in fewer unexpected interruptions and a more predictable tool life, supporting continuous production workflows. Geometry that increases stability and repeatability A Trigon 80° plate with a 0.8 mm corner radius and a 0° negative rake offers a robust edge line that resists chipping and maintains dimensional integrity in interrupted or heavy cuts. The RM5 chipbreaker is optimised for the material group M, producing short, manageable chips and reducing the risk of entanglement at the tool nose. Combined, these geometric features enable dependable results and help to simplify tool selection for repeat operations. Productivity benefits and application focus The insert’s specification favours manufacturers seeking balanced performance and process security when turning rostfreier Stahl. The coated grade and chip control geometry allow for sustained cutting conditions that can reduce setup changes and rework. As a component of a well‑engineered tooling system, the insert supports efficient cycle times while helping to protect the machine and workpiece finish, delivering tangible operational advantages in series production and challenging one‑off jobs. For technical consultation or to secure supply of this Walter Tools WNMG060408-RM5 WMP20S turning insert, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal grade and insert geometry for specific rostfreier Stahl applications Technical data Article number: WNMG060408-RM5-WMP20S-WALTER Name: WNMG060408-RM5 WMP20S turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Facts Corner radius: 0.8 mm Rake angle: 0° Plate form: Trigon 80° Plate size: 06 Thickness: 04 Special features Coating: Tiger·tec Silver Chipbreaker: RM5 Material group suitability: M (rostfreier Stahl) Execution: G Label/SKU: WNMG060408-RM5 WMP20S FAQ What materials is this insert intended for? The WNMG060408-RM5 WMP20S is specified for machining rostfreier Stahl and is optimised for the particular behaviour of these alloys under cutting. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker on this Walter Tools insert promotes secure, short chip formation, which improves chip control and reduces the likelihood of chip entanglement during rostfreier Stahl turning. Is the negative 0° rake suitable for heavy cuts? Yes, the 0° (negative) rake angle and Trigon 80° form provide a robust cutting edge that tolerates heavier engagement and intermittent cuts while maintaining edge stability. What surface finish can be expected with this grade? When used with appropriate parameters for rostfreier Stahl, the Tiger·tec Silver coated grade delivers consistent edge condition and helps achieve good surface quality along with predictable tool life. Can this insert be used in automated turning centres? The geometry and coating make the insert suitable for automated production environments where consistent chip control and repeatability are required for rostfreier Stahl components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for clarification purposes only and do not indicate any affiliation with or endorsement by the trademark owners. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
WNMG060408-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Take advantage of a high‑performance cutting solution that pairs Tiger‑tec Gold coating with the WMP30G grade for reliable machining of rostfreier Stahl; the combination of the RM5 chipbreaker and a 0.8 mm corner radius ensures secure chip control and consistent surface finish. Order directly via Metav Werkzeuge or consult our advisors for tailored cutting data and availability. WNMG060408-RM5 WMP30G – Trigon 80° turning insert, Tiger‑tec Gold (Walter Tools) The WNMG060408-RM5 WMP30G is a trigon-shaped turning insert designed for medium to robust machining of rostfreier Stahl, delivering stable edge life and predictable chip formation. Tiger‑tec Gold coating technology WMP30G coated‑carbide grade RM5 chipbreaker for secure chip control 0.8 mm corner radius, Trigon 80° form Consistent cutting performance for rostfreier Stahl The combination of the Tiger‑tec Gold coating and the WMP30G grade is engineered to counter the challenges presented by rostfreier Stahl, such as work hardening and poor thermal conductivity. The coating reduces friction and raises thermal stability, which leads to a more stable cutting edge and fewer built‑up edges during interrupted cuts. As a result, the insert provides predictable tool life under the specified medium to robust conditions and supports consistent part quality across production batches. Reliable chip control and surface integrity The RM5 chipbreaker geometry promotes controlled chip evacuation and reduces the risk of long, entangling chips that can damage the workpiece or toolholder. Combined with the Trigon 80° outline and a 0.8 mm corner radius, this insert balances strength at the cutting edge with a generous nose radius for improved surface finish. For workshop personnel unfamiliar with chipbreaker terms: the chipbreaker channels and breaks chips into shorter, manageable segments, simplifying handling and protecting the machine spindle and fixtures. Practical application and machinability advantages Designed for turning operations where rostfreier Stahl is the primary material, the insert’s negative 0° relief contributes to a robust cutting geometry that resists chipping under heavy radial engagement. The coated‑carbide composition of the grade offers wear resistance and edge stability, which reduces downtime for insert changes. For production environments seeking a repeatable process, this insert supports steady cycle times and reduces scrap rates through its controlled wear behaviour. Handling, indexing and economic benefits The trigon form allows multiple indexing positions, improving the effective life of each insert and lowering tooling costs per component. The WNMG format and the compact thickness code ensure compatibility with a broad range of standard toolholders for turning inserts; this simplifies logistics on the shop floor. Combined process reliability and the durability of the grade translate into a favourable cost‑per‑part ratio for long production runs. Contact Metav Werkzeuge for cutting data, availability and tailored recommendations for Walter Tools Tiger‑tec Gold inserts. Technical data SKU: WNMG060408-RM5-WMP30G-WALTER Designation: WNMG060408-RM5 ISO designation: WNMG060408-RM5 WMP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 06 Thickness code: 04 Corner radius: 0.8 mm Relief / clearance angle: 0° (negative) Insert form: Trigon 80° Tolerance class: M Grade code: WMP30G Special features Coating technology: Tiger‑tec Gold Grade: WMP30G (coated carbide) Chipbreaker: RM5 Execution: G Material application: suitable for rostfreier Stahl Application focus: medium to robust machining conditions on rostfreier Stahl FAQ What materials is this insert best suited for? The insert is specified for machining rostfreier Stahl; the WMP30G grade and Tiger‑tec Gold coating are selected to manage the toughness and heat characteristics of these alloys. How does the RM5 chipbreaker improve process stability? The RM5 chipbreaker on this turning insert helps form shorter chips and promotes secure evacuation, reducing risk of chip entanglement and supporting consistent surface finish. Can this insert be used in heavy cutting conditions? With a negative 0° relief and a 0.8 mm corner radius, the insert offers a robust geometry that withstands moderate to robust cutting parameters when set up with appropriate toolholder stiffness. How many cutting edges are available per insert index? The trigon 80° form provides several indexing positions; actual number of usable edges depends on wear and application, but the shape enables efficient rotation to fresh cutting edges. Is this a coated or uncoated grade? This is a coated carbide grade: WMP30G within the Tiger‑tec Gold family, designed for improved thermal resistance and reduced adhesion when machining rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation implied between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG060408-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, stable cutting edge and consistent chip control for productive turning of demanding alloys; order the insert via Metav Werkzeuge or request tailored advice from our consultants for seamless process integration. WNMG060408-RM5 WSM20S trigon turning insert by Walter Tools — Tiger‑tec Silver coated, RM5 chipbreaker WNMG060408-RM5 WSM20S is a trigon 80° turning insert designed for heavy‑duty machining of rostfreier Stahl and heat‑resistant alloys, delivering secure chip formation and extended edge life. Tiger‑tec Silver grade WSM20S Trigon 80° insert geometry Corner radius 0.8 mm RM5 chipbreaker for secure chip control Increased uptime through a heat‑resistant grade The WSM20S grade, part of the Tiger‑tec Silver family, is a coated carbide developed for high temperatures and adhesive wear typical of rostfreie Stähle and nickel‑based superalloys. Its multilayer coating improves thermal resistance and reduces chemical affinity at the cutting edge, which means fewer built‑up edge occurrences and longer periods between index changes. For production environments where edge stability reduces rework and unscheduled stoppages, this insert supports a more predictable machining cycle and lower overall unit cost per part. Stable geometry for consistent surface quality A Trigon 80° shape combined with a negative rake 0° geometry gives the insert superior edge robustness under interrupted cuts and shoulder work. The corner radius 0.8 mm balances strength and finish, offering improved resistance to chipping while maintaining acceptable surface integrity. The built‑in RM5 chipbreaker is optimised for secure chip formation with medium to heavy depth of cut ranges, reducing the risk of long, stringy chips that impair operator safety and machine uptime. Together, these features support repeatable part quality and reduced scrap rates. Application focus and economic benefits This insert is suitable for rostfreier Stahl as well as demanding alloys such as superalloys and titanium, where heat generation and poor thermal conductivity stress the cutting edge. In practical terms, the grade and geometry combination reduces the frequency of index changes and toolholder adjustments, enabling higher effective machine utilisation. For job shops and production lines machining difficult materials, the result is improved first‑pass yield and a measurable contribution to throughput. The WNMG060408-RM5 WSM20S insert integrates with standard WNMG toolholders and can be specified where process reliability and edge life are priorities. Discuss specific machining parameters and material fit with Metav Werkzeuge — our consultants can recommend cutting data and compatible holders to ensure optimal performance and process security Technical data Article number: WNMG060408-RM5-WSM20S-WALTER Label: Drehwendeschneidplatte WNMG060408-RM5 WSM20S Walter Tools Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Facts Insert size: 06 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Insert form: Trigon 80° Tolerance class: M Special features Coating: Tiger‑tec Silver Material: coated carbide Chipbreaker: RM5 Suitable for: rostfreier Stahl; superalloys; titanium Geometry: negative cutting edge design FAQ What materials is this insert best suited for? The WNMG060408-RM5 WSM20S insert is optimised for rostfreier Stahl and heat‑resistant alloys such as nickel‑base superalloys and titanium, where its Tiger‑tec Silver coating and grade stability reduce built‑up edge and thermal wear. How does the RM5 chipbreaker affect machining performance? The RM5 chipbreaker promotes secure, controlled chips under medium to heavy cuts, which improves process safety and reduces interruptions caused by tangled chips when using the WNMG060408-RM5 WSM20S insert. Can the insert handle interrupted cuts and shoulder machining? Yes — the Trigon 80° form combined with a negative rake and a 0.8 mm corner radius provides increased edge robustness for interrupted cuts and shoulder work, helping to maintain chip control and part quality. Is this insert compatible with standard WNMG toolholders? The geometry and ISO designation correspond to standard WNMG toolholder interfaces, allowing straightforward replacement and integration into existing tool setups when selecting the WNMG060408-RM5 WSM20S insert. Which coating advantages does Tiger‑tec Silver provide? The Tiger‑tec Silver coating increases thermal stability and reduces chemical adhesion at the cutting edge, which helps extend edge life and supports machining of materials that tend to generate high temperatures and built‑up edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
WNMG060408-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver thermal stability, a WSM30S coated‑carbide grade and a robust Trigon 80° form for consistent machining of stainless steels and heat‑resistant superalloys; order directly through Metav Werkzeuge or consult our specialists for cutting data and application advice. WNMG060408-RM5 WSM30S turning insert — Trigon 80°, Tiger‑tec Silver, Walter Tools The WNMG060408-RM5 WSM30S is a trigon 80° turning insert designed for machining stainless steels and heat‑resistant superalloys; suited to operations requiring thermal stability and reliable chip control. Tiger‑tec Silver coating for heat resistance Designed for stainless steel and superalloys Trigon 80° form with 0.8 mm corner radius Negative 0° rake with RM5 chipbreaker Consistent performance in demanding materials The coated‑carbide grade WSM30S, part of the Tiger‑tec Silver family, is engineered for improved thermal stability and enhanced oxidation resistance during heavy or interrupted cuts. As a coated carbide solution, this grade helps manage heat at the cutting edge, reducing the tendency for built‑up edge and promoting reproducible tool life when cutting stainless steel and superalloys. The specification favours secure chip formation and predictable wear behaviour, which supports higher process reliability on industrial turning operations. Stable cutting edge and chip control for productivity Equipped with the RM5 chipbreaker and a 0° (negative) rake, the geometry prioritises edge strength and stable cutting under adverse thermal loads. The combination of a robust chipbreaker and the negative rake angle increases resistance to edge chipping and enables consistent material evacuation in long, continuous cuts. This leads to fewer unscheduled index changes and contributes to higher overall productivity through longer effective cutting periods and reduced downtime for tool handling. Strong insert form for versatile machining strategies The Trigon 80° plate form with a 0.8 mm corner radius delivers a stiff, wear‑resistant cutting edge that tolerates higher radial engagement and affords good tool life in heavy‑duty applications. The trigon shape gives favourable entry angles for interrupted cuts while maintaining access in shoulder and profiling operations. Selection of corner radius and nose geometry determines surface finish and cutting forces; for smoother finishes a smaller radius can be chosen, whereas larger radii prioritise edge robustness and process security. Match to material groups and workshop practice Specified for material groups S and M, this insert is particularly suitable for heat‑resistant superalloys and titanium (S) and for stainless steel (M) where high temperatures and sticky chips present challenges. The designation balance between toughness and wear resistance makes the insert a practical choice for mixed‑material production runs. Walter Tools’ tooling solutions are recognised for stable edge life and process consistency; the WNMG060408-RM5 WSM30S insert supports repeatable results and cost‑efficient machining in serial manufacturing and jobbing alike. For application optimisation with Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for tailored cutting recommendations and availability — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: WNMG060408-RM5-WSM30S-WALTER Item designation: WNMG060408-RM5 Product type: Turning insert (WNMG) Manufacturer: Walter Tools Core data Grade: WSM30S Series: Tiger‑tec Silver Plate form: Trigon 80° Corner radius: 0.8 mm Plate size: 06 Thickness: 04 Rake angle: 0° (negative) Chipbreaker: RM5 Tolerance class: M Materials & features Coating: Tiger‑tec Silver Substrate: coated carbide Material suitability: S / M Applicable for: stainless steel (rostfreier Stahl) and heat‑resistant superalloys Execution: G FAQ Is this insert suitable for machining stainless steel and superalloys? Yes. The WSM30S grade in the WNMG060408-RM5 WSM30S insert is formulated for stainless steel (M) and heat‑resistant superalloys (S), providing improved thermal resistance and stable chip formation. What benefits does the Trigon 80° form provide? The Trigon 80° shape gives a stiff cutting edge and good entry geometry for interrupted cuts; combined with the 0.8 mm corner radius it balances edge strength and access in shoulder and profiling operations. Which chipbreaker is integrated and what is its purpose? The RM5 chipbreaker is fitted to control chip formation in demanding materials, promoting consistent evacuation and reducing the risk of entangling chips during continuous cuts. Is the insert more suitable for roughing or finishing operations? Suitability depends on nose radius and cutting parameters; the given 0.8 mm radius and RM5 breaker favour robust medium‑to‑heavy cuts, while alternative nose sizes and feeds can be selected for finer finishes. How is the insert identified for reordering and tool setup? Identification is via the designation WNMG060408-RM5 WSM30S (SKU WNMG060408-RM5-WSM30S-WALTER), which specifies geometry, chipbreaker and the WSM30S grade. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG060408-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coated grade, the stabilising Trigon 80° geometry and the RP5 chipbreaker, this insert provides reliable performance and controlled chip formation in steel turning. Order the WNMG060408-RP5 WPP10G directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. WNMG060408-RP5 WPP10G indexable turning insert, Trigon 80°, RP5 – Walter Tools WNMG060408-RP5 WPP10G is a negative Trigon 80° indexable turning insert engineered for productive steel machining where stable cutting and consistent edge life are required Tiger·tec Gold coated carbide grade for long life RP5 chipbreaker for consistent chip control Trigon 80° geometry for robust cutting edge 0.8 mm corner radius for improved surface finish Productive machining for steel components The insert capitalises on the Tiger·tec Gold coating and the WPP10G grade to deliver wear resistance and repeated performance in steel applications. The coating technology reduces flank wear and extends tool life under typical heat and strain during turning operations. This results in fewer tool changes and more predictable cycle times, which supports efficient production planning and improved machine utilisation. Controlled chip formation and process stability Thanks to the RP5 chipbreaker, the tool produces short, manageable chips during medium to heavy cuts, reducing the risk of entanglement and streamlining chip evacuation. The combination of chip control and a sturdy insert form helps to maintain stable cutting forces, which in turn lowers the likelihood of vibration and contributes to consistent dimensional accuracy. For process engineers, this means easier parameter tuning and repeatable results across batches. Geometry that balances strength and finish The Trigon 80° profile with a 0.8 mm corner radius provides a robust cutting edge capable of absorbing higher radial loads while still allowing for fine surface finishes where required. The negative 0° rake (negative geometry) increases edge strength for interrupted cuts or heavier feed rates, making the insert suitable for a mix of semi-finishing and roughing tasks. This balance reduces the need for multiple tooling changes between operations. Grade and series for dependable throughput Manufactured by Walter Tools as part of the Tiger·tec Gold series, the insert is a coated carbide solution optimised for steel machining (ISO group P). The tolerance class M supports reliable seating and repeatable positioning in toolholders, contributing to stable indexable insert performance over many tool life cycles. These characteristics make the insert a pragmatic choice for shops aiming to combine productivity with consistent component quality. For tailored cutting-data advice and availability for the Tiger·tec Gold WPP10G insert, contact Metav Werkzeuge – eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 to discuss application specifics and supply options Technical Data Article number: WNMG060408-RP5-WPP10G-WALTER Designation: WNMG060408-RP5 WPP10G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free cutting angle: 0° (negative) Insert shape: Trigon 80° Insert size: 06 Thickness: 04 Tolerance class: M Special features Chipbreaker: RP5 Grade: WPP10G (coated carbide) Series: Tiger·tec Gold Material application: Steel Execution: G FAQ What materials is this insert designed for? The insert is optimised for machining steel (ISO group P); the WPP10G grade and Tiger·tec Gold coating are specifically tuned for the thermal and chip-formation behaviour of steel. How does the RP5 chipbreaker affect performance? The RP5 chipbreaker produces short, controllable chips and improves evacuation, which enhances process stability and reduces the risk of chip-related interruptions in steel turning. Is the Trigon 80° shape suitable for heavy cuts? Yes, the Trigon 80° geometry provides a strong cutting edge well suited to higher radial loads and interrupted cuts, offering robustness for semi-finishing and roughing operations. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius balances edge strength with the ability to achieve improved surface finish compared with larger radii, making it versatile across a range of finishing tasks. Does the negative 0° geometry require special holders? The negative 0° geometry increases edge strength and is compatible with standard negative insert holders; ensure the toolholder matches the WNMG indexable insert seat and tolerance class M for repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
WNMG060408-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of longer tool life, consistent chip control and robust geometry for steel turning — order the insert directly via Metav Werkzeuge or consult our specialists for application support. WNMG060408-RP5 WNMG060408-RP5 WPP20G — Trigon indexable turning insert for steel | Walter Tools WNMG060408-RP5 WPP20G is an indexable turning insert for steel machining, engineered to deliver repeatable performance with Tiger·tec Gold coating and an RP5 chipbreaker for dependable production. Tiger·tec Gold coating for superior wear resistance RP5 chipbreaker for stable chip formation Trigon 80° shape with 0.8 mm nose radius Designed for steel machining (ISO group P) Increase throughput with a wear‑resistant grade The combination of the Tiger·tec Gold coating and the WPP20G grade provides a clear productivity advantage in steel turning. The advanced coating reduces flank and crater wear, enabling higher cutting speeds and longer tool life compared with uncoated grades. For production planning this translates into fewer indexings and lower tool-change frequency, which supports a steady machining rhythm and reduced unit costs. The economic benefit is particularly visible during medium to long production runs where tool durability directly affects uptime. Reliable chip control and consistent surface finish The RP5 chipbreaker, paired with the Trigon 80° form, is set up to manage the chip flow typical of ISO P materials. Stable chip formation minimises entanglements and tool nose damage, helping to maintain a consistent finish on turned components. The 0.8 mm nose radius strikes a balance between edge strength and surface quality, meaning fewer reworks and stable dimensional adherence across batches. This reliability simplifies process windows and lowers the need for frequent parameter adjustments. Robust geometry for secure, repeatable machining With a negative 0° rake and a tolerance class of M, the insert is built for demanding turning tasks where robustness and repeatability matter. The trigon shape provides three usable cutting edges per index, improving material utilisation and cost efficiency. Specifically designed for the thermal and chip‑formation behaviour of steel, this insert aids in predictable tool performance under typical shopfloor conditions. As a component from Walter Tools, the insert supports stable production and fast tool assignment in mixed‑material tool inventories. For production-critical steel turning, contact Metav Werkzeuge to specify the Walter Tools WNMG060408-RP5 WPP20G insert or to request tailored application advice from our technical consultants at Metav Werkzeuge. Technical data Article number: WNMG060408-RP5-WPP20G-WALTER Designation: WNMG060408-RP5 WPP20G Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Facts Size: 06 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Shape: Trigon 80° Chipbreaker: RP5 Grade: WPP20G Series: Tiger·tec Gold Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO group P) Geometry: Trigon 80° for stable cutting edges Usage: Designed for reliable chip control and extended tool life FAQ What materials is this insert suitable for? The WNMG060408-RP5 WPP20G insert is optimised for machining steel (ISO group P) and is formulated to handle the heat and chip characteristics typical of these materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance, which allows for higher cutting speeds and longer tool life, improving overall process efficiency. What does the RP5 chipbreaker provide in daily use? The RP5 chipbreaker promotes stable chip formation and reliable chip evacuation, reducing the risk of chip-related interruptions and helping to maintain consistent surface quality. Can the insert withstand interrupted cuts or heavier engagement? The trigon geometry with a 0.8 mm nose radius and negative 0° rake offers robust edge strength suitable for tougher turning conditions and intermittent cuts commonly encountered in production environments. How many edges are available per insert and what is the tolerance class? The trigon shape provides multiple usable cutting edges per index, and the insert conforms to tolerance class M for consistent dimensional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com