WNMG060408-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the robust WPP30G carbide grade and the RP5 chipbreaker for repeatable, cost‑effective steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and application guidance. WNMG060408-RP5 WPP30G — Indexable turning insert, Tiger‑tec Gold, Trigon 80° (Walter Tools) The WNMG060408-RP5 WPP30G is a Trigon 80° indexable turning insert engineered for productive machining of steel, combining a coated carbide grade with an RP5 chipbreaker to balance wear resistance and chip control Tiger‑tec Gold coated carbide grade WPP30G Trigon 80° geometry with 0.8 mm corner radius RP5 chipbreaker for reliable chip control 0° negative rake for robust turning of steel Consistent cutting performance for steel machining The coated hardmetal of the WPP30G grade, part of the Tiger‑tec Gold series, is formulated for the thermal and mechanical demands of machining ISO P materials (steel). The coating reduces abrasive wear and increases resistance to built‑up edge, which results in a more stable cutting edge over longer tool life. For manufacturers seeking reproducible results, this combination translates into fewer insert changes, reduced downtime and a predictable performance window under medium to heavy cutting conditions. The insert designation gives a clear indication of capability without relying on subjective descriptions. Controlled chips and reliable geometry that protect the toolholder The RP5 chipbreaker is designed to organise chip formation during continuous turning operations; it promotes short, segmented chips that evacuate safely from the cutting zone. The Trigon 80° profile offers three cutting edges per indexable insert, increasing tool economy, while the 0.8 mm corner radius provides a compromise between edge strength and surface finish. The 0° negative rake angle enhances edge robustness for interrupted cuts and heavier depths of cut, lowering the risk of premature edge breakdown. In practice, this means improved process security and fewer scrap parts when tackling mixed steel batches or varying section depths. Practical benefits for workshop productivity and quality assurance The insert’s M tolerance class and ISO designation make it compatible with standard toolholder systems and established clamping routines, simplifying inventory and changeover procedures. As an indexable insert, it enables fast corner changes and high edge economy, delivering measurable productivity gains on batch and serial production. Technical customers will appreciate that the design focuses on essential machining outcomes: consistent chip control, longer edge life and straightforward mechanical mounting. For procurement and planning, the clear specification helps with tool selection and reliable lifecycle forecasting. For tailored cutting data, edge recommendations or application checks for the Walter Tools WNMG060408-RP5 WPP30G insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert advice Technical data Article number: WNMG060408-RP5-WPP30G-WALTER Designation: WNMG060408-RP5 WPP30G Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WPP30G Manufacturer: Walter Tools Core data Shape: Trigon 80° Plate size: 06 Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Chipbreaker: RP5 Tolerance class: M Applications & features Coated carbide grade for steel (ISO P) Suitable material group: Steel Robust geometry for interrupted cuts Designed for consistent chip control Three usable cutting edges per insert FAQ What materials is this insert designed for? The WNMG060408-RP5 WPP30G insert is intended primarily for machining steel (ISO P); the WPP30G grade and Tiger‑tec Gold coating are tuned to handle the heat and chip formation typical of steel turning. How does the RP5 chipbreaker influence machining? The RP5 chipbreaker on this Trigon insert promotes short, controlled chips and reliable evacuation, improving process security and reducing the risk of chip‑related toolholder interference during continuous turning. What does the 0° negative rake mean in practice? A 0° (negative) relief increases edge robustness, making the insert better suited to interrupted cuts and heavier machining passes where a positive rake might chip or deform. How does the 0.8 mm corner radius affect surface finish and strength? A 0.8 mm corner radius balances edge strength with surface finish: it reinforces the cutting edge for longer life while still delivering acceptable surface quality for general turning tasks. Is this insert compatible with standard toolholders? Yes, the Trigon 80° form and the M tolerance class are compatible with common turning toolholders designed for WNMG‑style inserts; correct clamping and recommended cutting data ensure optimal performance. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used for clarification only; there is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original factory‑new merchandise of the manufacturer.
WNMG060412-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Benefit from the combination of a Tiger·tec Silver coating, an optimised MK5 chipbreaker and a robust Trigon 80° geometry for productive, repeatable machining of cast iron; order the WNMG060412-MK5 WKK10S insert via Metav Werkzeuge or consult the technical team for application advice. WNMG060412-MK5 WKK10S — Turning indexable insert, Tiger·tec Silver, for cast iron — Walter Tools The WNMG060412-MK5 WKK10S is a Trigon 80° turning insert with an MK5 chipbreaker, engineered for high-performance finishing and semi-finishing of cast iron components. Tiger·tec Silver coating for high wear resistance Optimised MK5 chipbreaker for short chips Trigon 80° form with 1.2 mm corner radius Grade WKK10S tuned for cast iron machining High wear resistance for consistent cycle times The combination of the Tiger·tec Silver coating and the WKK10S grade provides a wear-resistant surface optimised for the abrasive nature of cast iron. This coated cemented carbide formulation is designed to withstand the micro-abrasive attack and the frequent short, breaking chips typical of grey and nodular cast irons. The result is improved tool life and stable machining performance, which reduces setup variance and supports predictable production planning. The coating technology also aids heat resistance, helping to keep flank wear progression gradual under standard cutting conditions. Geometry and chip control that boost productivity The Trigon 80° insert form and the MK5 chipbreaker act together to produce controlled, short chips and a reliable cutting action in interrupted and continuous cuts. A 1.2 mm corner radius offers a balance between edge strength and surface quality, while the 0° (negative) relief angle increases robustness on heavy cuts and where form accuracy is critical. These geometry choices lower the risk of edge chipping and enable higher radial engagement, so cycle times can be shortened without compromising finish. For machinists, this translates into fewer tool changes and more consistent component tolerances. Practical compatibility and process reliability on cast iron With tolerance class M and codes indicating size and thickness, the insert integrates easily into standard turning toolholders that accept WNMG-style plates. The MK5 chipbreaker and the dedicated WKK10S grade make this insert particularly suitable for cast iron according to ISO 513 designations, providing stable chip formation and repeatable surface results. For production teams, that means less scrap, fewer reworks and a dependable contribution to output quality. The insert’s design supports both roughing strategies that demand edge security and finishing passes that require good surface integrity. For tailored advice on Walter Tools Tiger·tec Silver inserts and their application in cast iron turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical consultation. Technical Data Article number: WNMG060412-MK5-WKK10S-WALTER Designation: WNMG060412-MK5 Full ISO designation: WNMG060412-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Size code: 06 Thickness code: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Form: Trigon 80° Special features Grade: WKK10S Chipbreaker: MK5 Target material group: K (cast iron) Execution: G Material code: K FAQ What materials is this insert designed for? The WNMG060412-MK5 WKK10S is designed primarily for cast iron applications (material group K according to ISO designations). How does the MK5 chipbreaker affect chip formation? The MK5 chipbreaker produces short, controllable chips, which improves process safety and eases chip evacuation during turning with the WNMG060412-MK5 WKK10S. Is the insert suitable for heavy cuts? Yes. The 0° negative relief and Trigon 80° geometry increase edge robustness, making the insert suitable for higher radial engagement and interrupted cuts. What benefits does Tiger·tec Silver provide? The Tiger·tec Silver coating enhances wear resistance and heat tolerance, extending service life of the WKK10S grade in abrasive cast iron machining. Which tolerance class applies and why is it important? Tolerance class M ensures dimensional consistency for repeatable tool clamping and accurate positioning in compatible toolholders. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060412-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WKK20S grade delivers abrasion resistance and reliable chip control for cast iron machining; paired with the Trigon 80° geometry this supports stable seating and predictable tool life. Order the WNMG060412‑MK5 WKK20S turning insert directly via Metav Werkzeuge or consult the technical team for application advice. WNMG060412‑MK5 WKK20S Trigon 80° turning insert for cast iron, 0° negative — Walter Tools A WNMG060412‑MK5 WKK20S turning insert designed for efficient, robust machining of cast iron components in production and job‑shop environments. Tiger·tec Silver coating for abrasion resistance Optimised for cast iron machining Trigon 80° geometry for secure seating MK5 chipbreaker with 1.2 mm corner radius Improved process stability for abrasive materials The combination of the WKK20S grade with the Tiger·tec Silver coating is tailored to the abrasive wear typical of cast iron. This results in stable chip formation and reduced edge degradation under interrupted cuts common when machining cast components. The specified grade balances toughness and wear resistance, which helps maintain cutting-edge geometry for longer periods and reduces the frequency of tool changes, supporting continuous production runs and predictable process windows. Predictable seating and clamping for secure turning The Trigon 80° insert form offers a positive mechanical seat in toolholders, providing enhanced stability under turning forces. With a 0° negative relief angle, the geometry is suited to robust, heavy‑cut operations where axial and radial load transfer to the toolholder must be controlled. This means fewer vibrations and improved surface consistency on workpieces, delivering measurable improvements in throughput and reduced rework compared with less rigid geometries. Chip control and edge preparation that aid productivity Equipped with the MK5 chipbreaker and a 1.2 mm corner radius, this indexable insert promotes controlled, short chips that evacuate reliably from the cutting zone when processing cast iron. Short, consistent chips reduce the risk of tangling and machine downtime; the corner radius also contributes to edge strength, making the tool more tolerant of minor variances in clamping or workpiece runout. In practical terms, this supports higher material removal rates while maintaining component finish quality. Application guidance and integration into production The insert is specified for the machining of cast iron (ISO group K) and suits operations where efficient, repeatable performance is required. The format and chipbreaker are compatible with common WNMG toolholders used in turning centres and lathes. For implementation, select cutting parameters that match the grade’s balance of wear and toughness and ensure appropriate coolant and chip evacuation strategies; the insert’s coating assists in heat and abrasion management, contributing to consistent tool life across batch sizes. Contact Metav Werkzeuge to discuss the WNMG060412‑MK5 WKK20S insert application and availability or to request tailored cutting data from the technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: WNMG060412‑MK5‑WKK20S‑WALTER Label: Drehwendeschneidplatte WNMG060412‑MK5 WKK20S Walter Tools SKU: WNMG060412‑MK5‑WKK20S‑WALTER Series: Tiger‑tec Silver Grade: WKK20S Chipbreaker: MK5 Form: Trigon 80° Relief angle: 0° (negative) Corner radius: 1.2 mm Size: 06 Thickness: 04 Tolerance class: M Execution: G Material designation: K (cast iron) Facts Suitable material group: cast iron (ISO K) Designed for abrasive wear typical of cast materials Balanced toughness for interrupted and continuous cuts Trigon form for secure seating and stable clamping Short, controllable chip formation with MK5 chipbreaker Special features Coating technology: Tiger·tec Silver Application focus: cast iron machining Manufacturer brand: Walter Tools Indexable turning insert type: WNMG060412‑MK5 WKK20S Typical use: production and job‑shop turning operations FAQ What materials is this insert suitable for? The WNMG060412‑MK5 WKK20S insert is specified for cast iron (ISO group K) and is optimised to handle the abrasive wear and chip characteristics of these materials. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating on the WNMG060412‑MK5 improves abrasion resistance and heat management, contributing to longer, more consistent cutting edge life when machining cast iron. What does the Trigon 80° form provide in practice? The Trigon 80° geometry ensures secure seating in compatible toolholders and enhances rigidity, which helps reduce vibration and improve surface finish during turning operations. Is the MK5 chipbreaker suitable for interrupted cuts? Yes, the MK5 chipbreaker combined with the grade’s toughness produces short, manageable chips and a strong cutting edge, making it suitable for interrupted and unstable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification purposes only; no affiliation with the named manufacturers is implied. The offered article is an original, factory‑new product of the stated brand.
WNMG060412-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from a combination of robust edge strength, targeted chip control and the thermal resistance of the Tiger‑tec Silver grade; this results in dependable performance when machining demanding materials. Order the insert through Metav Werkzeuge or request tailored cutting data from their consultants for seamless integration into production. WNMG060412‑MM5 WSM20S turning insert — Tiger‑tec Silver, Trigon 80° (0° negative), Walter Tools The WNMG060412‑MM5 WSM20S is a trigon turning insert designed for heavy machining of rostfreier Stahl and heat‑resistant superalloys, offering a balanced combination of wear resistance and secure chip formation for stable process results. Tiger‑tec Silver coated carbide Optimised chip control MM5 geometry Trigon 80° plate form, robust clamping 1.2 mm corner radius for stable cutting edge Increased process stability for demanding materials The Tiger‑tec Silver grade WSM20S combines a coated carbide substrate with a coating system optimised for heat resistance and wear protection, which directly benefits machining of rostfreier Stahl and high‑temperature alloys. The coating reduces flank wear and helps prevent built‑up edge, so the toolholder experiences fewer vibrations and more uniform cutting forces. As a result, component tolerances remain consistent over longer production runs, supporting higher first‑pass yields and fewer in‑process reworks. The trigon plate form contributes to reliable clamping and edge support under elevated cutting loads. Reliable chip control and productive cutting behaviour The MM5 chipbreaker geometry is engineered to promote controlled chip formation in adhesive and tough materials where long, stringy chips can interrupt machining. With this chip control, coolant interaction and swarf handling become more predictable, helping to maintain cycle times and reduce manual chip clearing. The insert’s 1.2 mm corner radius delivers a compromise between edge strength and surface finish, enabling moderate to heavy cuts while still producing acceptable surface quality. In practical terms, the combination of chip geometry and grade supports continuous, productive turning operations with fewer unscheduled tool changes. Design features that support robust machining routines A 0° (negative) free angle denotes a neutral to slightly negative rake, which increases the mechanical strength of the cutting edge and suits interrupted cuts and higher feed rates. The compact 06 plate size and 04 thickness give a stable contact area in the pocket, while the trigon 80° form is chosen for its stiffness and resistance to deflection under load. For shops moving from general‑purpose grades, this insert offers an accessible step to handle tougher workpiece materials without extensive process requalification. When setting cutting parameters, favour conservative depth‑of‑cut increases and verify chip shape before ramping speeds to exploit the grade and geometry safely. Practical benefits and machining recommendations Use this insert where secure chip evacuation and edge stability are priorities—typical applications include semi‑finishing and rough turning of rostfreier Stahl and heat‑resistant alloys. The coated carbide and MM5 geometry reduce the tendency for built‑up edge formation typical of these materials, supporting longer tool life and more predictable tool‑change intervals. For best results, combine the insert with a rigid toolholder, appropriate coolant application and incremental parameter adjustments. Routine monitoring of surface finish and tool flank wear provides an early indicator for optimising cutting data and extending insert performance. Contact Metav Werkzeuge for customised application advice and cutting parameters for the WNMG060412‑MM5 WSM20S from Walter Tools Technical data Article number: WNMG060412‑MM5‑WSM20S‑WALTER Description: Drehwendeschneidplatte WNMG060412‑MM5 WSM20S Walter Tools Manufacturer: Walter Tools Product type: turning insert Series: Tiger‑tec Silver Grade: WSM20S ISO designation: WNMG060412‑MM5 WSM20S Plate form: Trigon 80° Free angle: 0° (negative) Corner radius: 1.2 mm Plate size: 06 Plate thickness: 04 Numbers / Core technical data Corner radius: 1.2 mm Free angle: 0° (negative) Plate size: 06 Plate thickness: 04 Special features / Applications Coated carbide grade: Tiger‑tec Silver WSM20S Chipbreaker: MM5 Suitable for: rostfreier Stahl Also suitable for: heat‑resistant superalloys and titanium Designed for secure chip formation and stable cutting edge FAQ What materials is this insert intended for? The WNMG060412‑MM5 WSM20S is intended primarily for rostfreier Stahl and is also suitable for heat‑resistant superalloys and titanium, reflecting the material groups S and M. How does the MM5 chipbreaker affect machining? The MM5 geometry promotes controlled chip formation and safer chip evacuation when machining adhesive or high‑toughness materials, reducing the risk of entangling swarf and unplanned interruptions. What does 0° (negative) free angle mean in practice? A 0° (negative) free angle indicates a neutral to slightly negative rake condition that strengthens the cutting edge and improves resistance to mechanical shock and interrupted cuts. Which cutting applications suit this trigon insert best? The trigon 80° shape and robust edge make the insert well suited to semi‑finishing and rough turning where rigidity and edge stability are essential. Are there recommended toolholder or coolant practices? Use a rigid toolholder and verify coolant direction and pressure to assist chip removal; the WSM20S grade benefits from controlled cooling and proper swarf management for sustained performance. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. The mentioned brand names and product designations are used for explanatory purposes only and there is no affiliation between our company and the named manufacturers.
WNMG060412-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger·tec Silver grade combined with a robust Trigon 80° geometry and the MM5 chipformer for reliable machining of stainless steel and superalloys; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. WNMG060412-MM5 WSM30S indexable turning insert – Tiger·tec Silver, for stainless steel and superalloys (Walter Tools) WNMG060412-MM5 WSM30S is a coated carbide turning insert designed for heavy-duty and demanding materials, offering a stable cutting edge and optimised chip control for stainless steels and heat-resistant alloys Tiger·tec Silver coated carbide MM5 chipformer for consistent chip control Trigon 80° shape for robust engagement Suitable for stainless steel and superalloys Proven grade for demanding materials and high temperatures The WSM30S grade, part of the Tiger·tec Silver family, combines a wear-resistant coating with a tough substrate to support machining of stainless steel and other difficult-to-cut alloys. The coated carbide composition ensures improved heat resistance and a predictable tool life under elevated cutting temperatures. With the MM5 chipformer, the insert promotes controlled chip formation, reducing the risk of built-up edge and improving surface finish consistency even in challenging feed and speed regimes. Geometry engineered for stability and heavy cuts A Trigon 80° profile and a 1.2 mm corner radius deliver high stability at the cutting edge, enabling secure entry and sustained performance during interrupted cuts or deep turning operations. The 0° relief angle (negative) increases the effective cross section of the insert, improving strength where rigidity and edge security are priorities. These geometry choices translate into fewer insert changes and a more predictable machining process in production environments. Process benefits: productivity, surface quality and repeatability Designed for industrial turning applications, this insert supports higher process reliability and constant results across batches. The combination of coating technology and geometry provides good chip control, extended edge life and consistent surface quality on challenging materials classified under ISO groups M and S. For workshops seeking economical productivity gains, the insert contributes to lower overall tooling costs through longer intervals between replacements and reduced rework. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver grades and to confirm suitability for specific stainless steel alloys — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: WNMG060412-MM5-WSM30S-WALTER Designation: WNMG060412-MM5 WSM30S Type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM30S Chipformer: MM5 Shape: Trigon 80° Relief angle: 0° (negative) Corner radius: 1.2 mm Insert size: 06 Thickness code: 04 Tolerance class: M Execution: G Manufacturer: Walter Tools Product category: Drehwendeschneidplatte Facts Corner radius: 1.2 mm Relief angle: 0° Insert size code: 06 Thickness code: 04 Tolerance class: M SKU: WNMG060412-MM5-WSM30S-WALTER Special features Coating: Tiger·tec Silver Material applicability: S / M Applicable material group: stainless steel (M), superalloys/titanium (S) Chip control: MM5 chipformer Shape: Trigon 80° for robust engagement Grade type: Coated carbide FAQ What materials is this insert best suited for? The WNMG060412-MM5 WSM30S insert from Walter Tools is optimised for stainless steel and high-temperature superalloys, covering ISO groups M and S for demanding turning tasks. How does the MM5 chipformer affect machining performance? The MM5 chipformer on this Walter Tools grade produces consistent, manageable chips that reduce built-up edge formation and support reliable surface finishes during continuous production. What advantage does the Trigon 80° shape provide? A Trigon 80° geometry increases engagement strength and stability, which benefits heavy cuts and interrupted machining by protecting the cutting edge and maintaining dimensional repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
WNMG060412-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the proven combination of a Tiger·tec Gold coating and the WPP20G grade together with the MP3 chipbreaker and Trigon 80° geometry for reliable machining of steel; this results in predictable tool life, controlled chip formation and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. WNMG060412-MP3 WPP20G indexable turning insert by Walter Tools — Tiger·tec Gold, MP3 chipbreaker The WNMG060412-MP3 WPP20G is an indexable turning insert designed for robust steel machining, featuring a Trigon 80° shape and a Tiger·tec Gold coated carbide grade for universal turning applications. Tiger·tec Gold coated carbide grade WPP20G Optimised MP3 chipbreaker for stable chips Trigon 80° geometry for secure clamping Negative 0° rake for interrupted cuts High reliability for steel machining and predictable tool life The combination of a Tiger·tec Gold coating with the WPP20G substrate is engineered for the thermal and mechanical demands of machining steel. The coating reduces flank wear and provides consistent cutting performance across a range of unalloyed and alloyed steels, while the substrate balances hardness and toughness for extended service life. This results in fewer tool changes, more stable cutting edges and reliable component surface quality, supporting continuous production workflows. Efficient chip control and process stability With the MP3 chipbreaker and the Trigon 80° platform, the insert promotes controlled chip formation and evacuation during turning. The chipbreaker geometry reduces the risk of snarled chips and machine downtime, making the insert particularly suitable for varying feeds and depths of cut. The negative 0° rake further improves robustness during interrupted or heavy cuts, enhancing process stability and enabling safe operation in demanding turning tasks. Geometry and dimensional features that aid clamping and accuracy The triangular 80° shape provides three indexed cutting edges and compact clamping, supporting economical use per insert. The specified corner radius of 1.2 mm offers a balance between edge strength and surface finish, while the plate size and thickness are consistent with standard turning toolholders for straightforward integration. These geometric choices reduce vibration and help maintain repeatable part tolerances in serial production. Practical application benefits and shop-floor advantages Designed for general turning of steel, the WPP20G grade gives a versatile performance profile across a range of cutting conditions, favouring shops that need dependable all-round inserts. The tolerance class M ensures consistent manufacturing quality of the insert itself, which contributes to predictable tool offsets and repeatable set-ups. Overall, the tool supports higher machine availability and reduced rework, translating into measurable productivity improvements on the shop floor. Contact Metav Werkzeuge today for application advice or to request specific cutting data for the WNMG060412-MP3 WPP20G insert Technical data Article number: WNMG060412-MP3-WPP20G-WALTER Designation: WNMG060412-MP3 WPP20G Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Facts Grade / series: WPP20G, Tiger·tec Gold Chipbreaker: MP3 Shape: Trigon 80° Corner radius: 1.2 mm Rake: 0° (negative) Size: 06 Thickness: 04 Tolerance class: M Special features Coated cemented carbide Application group: P (steel) Optimised chip control for turning Three usable cutting edges per insert Robust for interrupted cuts and serial production FAQ What materials is this insert intended for? The WNMG060412-MP3 WPP20G insert is specified for steel applications (ISO group P); the WPP20G grade and Tiger·tec Gold coating are tuned to the thermal and chip-formation behaviour of steels. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the WNMG060412-MP3 promotes controlled chip formation and improved evacuation, reducing the risk of chip entanglement and supporting stable cutting conditions in turning operations. Can the Trigon 80° shape be indexed for multiple uses? Yes, the triangular 80° geometry provides up to three indexed cutting edges, enabling economical use and straightforward clamping in standard toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060412-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP10G grade for reliable steel turning and consistent chip control; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. WNMG060412-MP5 WPP10G Trigon 80° indexable insert for steel – Walter Tools A WNMG060412-MP5 WPP10G indexable turning insert engineered for robust steel machining with a Tiger·tec Gold coating and an MP5 chipbreaker Tiger·tec Gold coated carbide grade WPP10G Trigon 80° form for unstable turning MP5 chipbreaker for controlled chips 1.2 mm corner radius, negative 0° geometry High process reliability for steel turning The Tiger·tec Gold-coated indexable insert offers a blend of wear resistance and edge stability that supports continuous production. The coated carbide grade WPP10G is optimised for ISO P applications, meaning it is particularly suitable for unalloyed and alloyed steel, where typical heat generation and chip formation occur. The combination of coating and substrate reduces flank wear and helps maintain dimensional accuracy over extended tool life, which translates into fewer interruptions on the shop floor and more predictable part quality. Geometry that improves stability and productivity The Trigon 80° shape and the negative 0° relief angle provide a mechanically robust geometry that resists edge chipping under interrupted cuts or heavy engagement. A 1.2 mm corner radius increases edge strength, allowing modest depths of cut without sacrificing finish. This geometry is especially beneficial in applications with variable engagement or when machining medium- to heavy-duty components, as the triangular form gives three usable cutting edges per indexable insert and supports stable, repeatable results. Controlled chip formation and easier handling The MP5 chipbreaker is designed to produce short, manageable chips when cutting steels, improving evacuation and reducing the risk of chip-related tool damage. Controlled chips reduce cycle interruptions and make automated or semi-automated operations safer and more reliable. The insert’s coated carbide construction supports consistent performance across varying feed rates and toolpaths, helping to keep setup times low and inventory turnover efficient in production environments. Practical integration into production workflows This turning insert integrates smoothly into standard toolholders for trigon inserts and suits a wide range of turning tasks within steel machining. The coated grade and chipbreaker combination enables a balance between wear resistance and toughness, which can lower total tooling costs through longer intervals between indexing or replacement. For best results, correlate machining parameters with the toolholder rigidity and part geometry, and consider trial cuts to optimise feeds and speeds for the specific machine setup and workpiece. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to confirm current availability and stocking options Technical data Article number: WNMG060412-MP5-WPP10G-WALTER Product: Indexable turning insert Designation: WNMG060412-MP5 Grade: WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Shape angle: 80° Relief angle: 0° (negative) Plate size: 06 Thickness: 04 Tolerance class: M SKU / UID: WNMG060412-MP5-WPP10G-WALTER Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MP5 Suitable for: Steel (ISO P) Geometry: Trigon 80° Application: turning / indexable insert FAQ Which materials are recommended for this insert? The WNMG060412-MP5 WPP10G insert is specified for steel machining in line with ISO P; the grade and coating are tuned for typical heat and chip conditions encountered when turning unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating on the WPP10G grade provides enhanced wear resistance and stable cutting-edge behaviour, supporting longer tool life and more consistent component quality in steel turning. When is the Trigon 80° form most appropriate? The Trigon 80° geometry is well suited to operations with variable engagement or interrupted cuts and where a robust cutting edge is needed; the triangular shape offers three indexable edges for efficient usage. How should cutting parameters be approached with this insert? Begin with conservative feeds and depths appropriate to machine rigidity and part geometry, monitoring tool life and surface finish; adjust parameters progressively to balance material removal rate and insert longevity for the WNMG060412-MP5 WPP10G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the brands named. The offered article is original, factory-new goods of the manufacturer Walter Tools.
WNMG060412-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger‑tec Gold coated carbide and an MP5 chipbreaker for reliable steel turning, delivering consistent edge life and productive machining. Order directly via Metav Werkzeuge or consult our specialists for selection and availability. WNMG060412-MP5 WPP20G indexable turning insert for steel — Walter Tools (Tiger‑tec Gold, Trigon 80°) A WNMG060412-MP5 WPP20G indexable turning insert designed for productive steel machining with a Tiger‑tec Gold coated carbide grade and a Trigon 80° form. Tiger‑tec Gold coated carbide MP5 chipbreaker for steel Trigon 80° for robust cutting Corner radius 1.2 mm for edge strength Productive turning with proven coated carbide performance The insert is built on a coated carbide substrate in the Tiger‑tec Gold family, a technology engineered for a balance of wear resistance and toughness. This combination supports stable cutting in common steel applications, helping to extend tool life and reduce the frequency of index changes. The WPP20G grade is optimised for ISO P materials, providing a dependable compromise between durability and universality that suits both finishing and general turning tasks. Consistent chip control and mechanical stability for higher throughput Equipped with the MP5 chipbreaker and a Trigon 80° plate form, the geometry promotes predictable chip formation and robust insert seating. The corner radius 1.2 mm increases edge strength for interrupted cuts and tougher turning operations, while the negative 0° rake contributes to mechanical stability under higher feed or depth of cut conditions. These characteristics translate into fewer unplanned stoppages and a smoother production rhythm on lathes and CNC turning centres. Clear application focus and material suitability This insert is explicitly specified for steel (ISO P) machining, matching the material class indicated in the technical data. The design and grade composition mean it handles the thermal and chip‑forming behaviour typical of unalloyed and alloyed steels. For shops seeking a universal, reliable insert for mixed steel workpieces, the combination of MP5 chip control and Tiger‑tec Gold coating provides an efficient and versatile solution. Contact Metav Werkzeuge for application advice, availability and to discuss how this Walter Tools insert fits specific turning requirements Technical data Article number: WNMG060412-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte WNMG060412-MP5 WPP20G Walter Tools SKU: WNMG060412-MP5-WPP20G-WALTER Core figures Plate form: Trigon 80° Plate size: 06 Corner radius: 1.2 mm Plate thickness: 04 Freedom angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Grade: WPP20G (Tiger‑tec Gold) Material type: Coated carbide Applicable material: Steel (ISO P) FAQ What materials is this insert suited for? The WNMG060412-MP5 WPP20G is specified for steel in accordance with ISO P groupings, making it suitable for unalloyed and alloyed steels. What benefits does the WPP20G grade provide? WPP20G, part of the Tiger‑tec Gold family, offers a coated carbide composition that balances wear resistance and toughness for consistent tool life in general steel turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker promotes controlled chip formation in steel turning, supporting reliable evacuation and reducing risk of rework due to poor chip control. Is the insert suitable for interrupted cuts? Yes. The corner radius 1.2 mm and the negative 0° rake contribute to edge robustness and mechanical stability, which are beneficial for interrupted or heavy cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer (Walter Tools).
WNMG060412-MW5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant Tiger‑tec Silver grade, a stable Trigon 80° geometry and precise chip control to keep production processes consistent and economical; order directly through Metav Werkzeuge or contact the team for application advice. WNMG060412-MW5 WKK10S turning insert — Trigon 80° with 1.2 mm corner radius, Walter Tools The WNMG060412-MW5 WKK10S is a trigon 80° indexable insert designed for productive machining of cast iron, optimised for abrasive wear and short, controlled chips. Tiger‑tec Silver coated for extended life Optimised for cast iron machining Trigon 80° geometry for stable cutting 1.2 mm corner radius for robust edge Longer tool life in abrasive cast‑iron applications The combination of the Tiger‑tec Silver coating and the WKK10S substrate is tuned to resist the abrasive wear typical of cast iron workpieces. The coated carbide grade balances wear resistance with toughness so that edge life is extended under frequent interruptions and variable cutting conditions. This results in fewer insert changes and more predictable maintenance intervals, improving overall process economy while keeping finish quality consistent — ideal where abrasive castings must be machined reliably, as demonstrated by the WNMG060412‑MW5 designation. Geometry that delivers stability and surface quality A trigon‑shaped cutting geometry with an 80° wedge angle provides axial and radial support that reduces chatter and improves dimensional control. The 1.2 mm corner radius increases edge strength for interrupted cuts, while the 0° (negative) rake contributes to secure clamping and controlled cutting forces. Together these features produce a stable cutting action that improves surface integrity and repeatability, making the insert suitable where consistent part tolerances are required across batch production. Efficient chip control for safer, faster cycles The MW5 chipbreaker is developed to produce short, manageable chips when machining cast iron, reducing the risk of entanglement and promoting safe evacuation. Reliable chip formation lowers tool and machine downtime, supports higher effective cutting speeds and contributes to process stability — a rational advantage where throughput and predictable cycle times matter. Clear chip control also eases handling at secondary operations and reduces manual rework, supporting more efficient shopfloor workflows. Straightforward integration into existing tool systems The insert follows the WNMG 06 profile with a plate thickness code 04 and tolerance M, matching many standard turning toolholder systems. This compatibility simplifies stocking and changeover: the format is widely accepted in industry holders and clamping systems, enabling quick replacement and minimal setup time. The grade’s focus on cast‑iron machining and the proven Tiger‑tec Silver technology from Walter Tools combine to offer a cost‑effective solution for series production and jobbing alike. For expert selection and process recommendations for Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored advice and ordering via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: WNMG060412‑MW5‑WKK10S‑WALTER Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Facts Corner radius: 1.2 mm Plate form: Trigon 80° Free cutting angle: 0° (negative) Plate size: 06 Plate thickness: 04 Tolerance class: M Special features Chipbreaker: MW5 Material application: cast iron Execution/version: G ISO designation: WNMG060412‑MW5 WKK10S Suitable for abrasive castings and short, breaking chips FAQ Which materials is this insert designed for? The insert is specified for machining cast iron; the WKK10S grade and the Tiger‑tec Silver technology are optimised for abrasive wear and the short, breaking chips typical of cast materials. What geometry and edge preparation does it have? The insert features a Trigon 80° geometry with a 1.2 mm corner radius and a 0° (negative) rake, providing robust edges and stable cutting forces for interrupted and continuous turning. How does the MW5 chipbreaker perform in practice? The MW5 chipbreaker produces short, controllable chips when cutting cast iron, improving evacuation and reducing the risk of chip entanglement in automated or manual operations. Which toolholders are compatible with this size? The WNMG 06 format with plate thickness code 04 matches standard WNMG toolholders; tolerance class M supports consistent seating and repeatable indexability. What are the advantages of Tiger‑tec Silver coating? The Tiger‑tec Silver coating extends tool life under abrasive conditions and improves wear resistance without sacrificing enough toughness for routine interrupted cuts, enhancing productivity and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG060412-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the wear-resistant Tiger·tec Gold grade WPP10G with the stable MW5 chipbreaker and a Trigon 80° geometry, this insert offers consistent chip control and extended tool life in steel turning; order directly via Metav Werkzeuge or consult their specialists for application support. WNMG060412-MW5 WPP10G trigon turning insert — Tiger·tec Gold, MW5 — Walter Tools The WNMG060412-MW5 WPP10G is a Trigon 80° turning insert designed for machining steel, offering a coated-carbide grade for reliable wear resistance and dependable chip control. Tiger·tec Gold coating for extended tool life MW5 chipbreaker for controlled chip formation Trigon 80° geometry for stable roughing and finishing Negative 0° rake for secure engagement in steel Long tool life through advanced coating technology The combination of a coated carbide substrate and the Tiger·tec Gold technology provides a balanced resistance to abrasion and thermal loads, which translates into longer intervals between indexings and reduced tooling costs. The WPP10G grade is engineered for the typical heat generation and chip behaviour encountered when machining steels (ISO group P), delivering high process reliability across a wide range of turning operations. By reducing flank and crater wear, the coating supports consistent dimensional accuracy and surface quality during extended production runs, making the insert a practical choice for batch manufacturing and steady-volume applications. Geometry and chip control for predictable machining A Trigon 80° profile combined with the MW5 chipbreaker and a 1.2 mm corner radius ensures stable cutting forces and predictable chip formation in diverse turning tasks. The 0° (negative) rake produces a secure engagement that benefits interrupted cuts and heavy cross-sections, while the tolerance class M promotes reproducible seat fit and interchangeability in fixedholders. These geometric features are optimised to reduce vibration and improve tool life, so machining cycles remain efficient without sacrificing surface finish or dimensional consistency. The chipbreaker design channels swarf reliably, lowering the risk of built-up edge and facilitating safe handling in automated turning cells. Practical application and workshop advantages Specifically suited to steel machining, this insert is appropriate for both unalloyed and alloyed steels where a combination of wear resistance and toughness is required. The robust grade chemistry of WPP10G supports a broad application window: moderate feeds and cuts for finishing through to more aggressive parameters for productive roughing. Process planners benefit from a predictable performance envelope that simplifies cutting-data selection and reduces trial-and-error on the shop floor. Backed by the reputation of Walter Tools, the insert contributes to a stable production flow and easier planning of regrinding or index cycles, which supports overall productivity and cost-efficiency in daily operations. Contact Metav Werkzeuge today to specify the ideal Tiger·tec Gold WPP10G turning insert for steel machining or request tailored cutting data from our consultants. Technical data SKU: WNMG060412-MW5-WPP10G-WALTER Designation: WNMG060412-MW5 Full designation: WNMG060412-MW5 WPP10G Product type: turning insert Brand: Walter Tools Core data Insert size code: 06 Thickness code: 04 Corner radius: 1.2 mm Geometry: Trigon 80° Rake angle: 0° (negative) Tolerance class: M Materials and features Grade: WPP10G Coating technology: Tiger·tec Gold Chipbreaker: MW5 Applicable material group: Steel (P) Execution: G FAQ What materials is this insert suitable for? The WNMG060412-MW5 WPP10G insert from Walter Tools is designed primarily for the machining of steels (ISO group P), including both unalloyed and alloyed grades. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, which helps maintain dimensional accuracy and extend tool life during steel turning operations. When is the MW5 chipbreaker most effective? The MW5 chipbreaker achieves best results in combination with the Trigon 80° geometry for controlled chip formation in a range of cutting depths and feeds, supporting both roughing and finishing cycles. What does the 0° (negative) rake angle imply for cutting? A 0° (negative) rake increases cutting-edge security and robustness, which is advantageous for interrupted cuts, tough material sections and situations requiring higher stability. How does the 1.2 mm corner radius affect surface finish and strength? A 1.2 mm corner radius provides a compromise between edge strength and achievable surface finish, offering improved robustness for heavy cuts while still permitting acceptable surface quality on finishing passes. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer.
WNMG060412-MW5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and robust edge stability for consistent, productive steel turning. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored cutting data. WNMG060412-MW5 WPP20G – Trigon 80° indexable turning insert (Tiger·tec Gold) by Walter Tools The WNMG060412-MW5 WPP20G is a negative-rake Trigon 80° indexable turning insert engineered for reliable steel machining, featuring a Tiger·tec Gold coated carbide grade and an MW5 chipbreaker for controlled swarf formation. Tiger·tec Gold coating for long tool life Trigon 80° shape for stable negative cutting 1.2 mm corner radius for robust edge strength Optimised MW5 chipbreaker for steel turning Consistent edge life and precise performance for production runs The coated carbide grade WPP20G in this insert delivers a balanced combination of wear resistance and toughness, designed specifically for steel applications (material group P). The Tiger·tec Gold technology provides a hard, thermally stable coating that reduces flank and crater wear, which translates into longer tool life and fewer index changes per workpiece. With a 1.2 mm corner radius and the Trigon 80° geometry, the insert offers improved edge support for interrupted cuts and stable turning, reducing the risk of chipping while maintaining dimensional accuracy over extended cycles. Predictable chip control and thermal behaviour for efficient machining The MW5 chipbreaker is optimised for conventional steel turning, promoting short, segmented chips and reliable swarf evacuation under varying cutting conditions. The negative rake 0° configuration gives a robust cutting edge and improved resistance to mechanical impact, which benefits heavy or semi-finishing operations. Together, effective chip control and thermal stability enhance process reliability, allowing higher average material removal rates and consistent surface quality when machining unalloyed and alloyed steels. Simple integration into turning workflows and measurable advantages Designed for interchangeable use in standard WNMG toolholders, this Trigon insert supports repeatable indexability and easy stock management. The tolerance class M and the standardised WNMG geometry ensure compatibility across common tool systems, reducing set-up times. For production-focused shops, the insert’s combination of coating technology and chipbreaker results in fewer tool changes and lower overall tooling cost per part, supporting higher uptime and predictable throughput in serial machining. For long-lasting performance in steel turning with Tiger·tec Gold, contact Metav Werkzeuge for cutting data, availability and matching toolholder recommendations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: WNMG060412-MW5-WPP20G-WALTER Designation: WNMG060412-MW5 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Corner radius: 1.2 mm Free cutting angle: 0° (negative) Plate form: Trigon 80° Plate size: 06 Plate thickness: 04 Tolerance class: M Special features Coating/grade: WPP20G (coated carbide, Tiger·tec Gold) Chipbreaker: MW5 Material application: P (Steel) Geometry: negative rake, Trigon 80° shape FAQ What materials is this insert suitable for? The WNMG060412-MW5 WPP20G is formulated for steel (material group P) and is optimised for unalloyed and alloyed steels according to the grade characteristics of WPP20G. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on this Trigon insert promotes controlled short chips and reliable evacuation during turning of steel, supporting consistent surface finish and reducing risk of chip entanglement. Is the insert compatible with standard WNMG toolholders? Yes, the geometry WNMG060412-MW5 corresponds to standard WNMG toolholder interfaces and allows rapid indexability and straightforward tool management in existing tool systems. What are the main benefits of the Tiger·tec Gold coating on this grade? Tiger·tec Gold coating on the WPP20G grade improves thermal and abrasive wear resistance, which increases tool life and supports steady machining performance under a variety of cutting conditions. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer. The Walter AG (brand presentation: Walter Tools) is a leading provider of precision tools for metalworking and is part of the Sandvik group.
WNMG060412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating for extended tool life, the Trigon 80° geometry for stable cutting forces and the RP5 chipbreaker for reliable chip control, this turning insert delivers productive and repeatable steel machining — order directly via Metav Werkzeuge or consult our specialists for application support. WNMG060412-RP5 WPP10G – Turning insert for steel, Walter Tools A WNMG060412-RP5 WPP10G turning insert engineered for efficient steel turning with a Tiger‑tec Gold coating and negative rake geometry. Tiger‑tec Gold coated carbide grade WPP10G Optimised for steel machining Trigon 80° geometry with 1.2 mm nose radius Negative 0° rake for stable cutting Longer tool life and consistent wear behaviour The combination of the Tiger‑tec Gold coating and the WPP10G grade provides a balanced performance profile for steel machining. The multi‑layer coating reduces flank wear and improves thermal stability, which translates into longer tool life and fewer insert changes during production. Coated carbide substrates are chosen to tolerate the heat and typical chip formation encountered when turning unalloyed and alloyed steel, ensuring consistent dimensional results and reduced process variation. Stable cutting, predictable chip control and surface quality The insert’s RP5 chipbreaker and Trigon 80° shape are designed to control chip formation and evacuation under typical steel cutting conditions. The negative 0° free angle increases the strength of the cutting edge for interrupted cuts and heavy engagement, while the 1.2 mm corner radius delivers a good compromise between edge strength and surface finish. Together these features enable higher material removal rates and reduced rework, supporting a more productive turning process with reliable surface integrity. Practical handling and application guidance for workshop use Sized as a 06 insert with a plate thickness of 04 and tolerance class M, this component fits standard toolholders used in most turning centres. The RP5 chip geometry simplifies setup by producing predictable chips across a range of feeds and depths of cut. If there is uncertainty about parameter selection or toolholder compatibility, Metav Werkzeuge provides application support and advice; technical consultation helps to match cutting data and clamping systems to the specific job and workpiece material. The robust design reduces downtime and supports consistent batch quality. Order genuine Walter Tools Tiger‑tec Gold inserts such as the WNMG060412-RP5 WPP10G via Metav Werkzeuge for improved steel turning performance — contact Metav Werkzeuge for tailored technical advice and rapid delivery. Technical data Article number: WNMG060412-RP5-WPP10G-WALTER Designation: WNMG060412-RP5 WPP10G Type: Turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Grade/Coating: WPP10G / Tiger‑tec Gold Facts Corner radius: 1.2 mm Plate size: 06 Plate thickness: 04 Free angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RP5 Plate form: Trigon 80° Substrate: coated carbide Material application: steel Execution: G FAQ What materials is this insert suited for? The WNMG060412-RP5 WPP10G is optimised for machining steel according to ISO group P, designed to handle the typical heat and chip behaviour encountered with unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit production runs? Tiger‑tec Gold on the WPP10G grade reduces flank wear and improves thermal resistance, which extends tool life and provides more consistent component quality over long production runs. Which chipbreaker should be expected with this insert and what is its advantage? The insert uses the RP5 chipbreaker, which promotes controlled chip formation and evacuation when turning steel, lowering the risk of built‑up edge and reducing interruptions for chip clearing. Is the insert suitable for interrupted cuts or heavy roughing? Yes. The negative 0° free angle and the Trigon 80° geometry with a 1.2 mm nose radius enhance edge strength, making the insert suitable for interrupted cuts and heavier machining tasks. What does the tolerance class M imply for fitting in toolholders? Tolerance class M indicates standardised dimensional accuracy suitable for most common turning toolholders; however, verification with the specific clamping system is recommended before series production. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Tools
WNMG060412-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of proven chip control, a robust trigon geometry and the Tiger‑tec Gold coating for stable, productive steel turning; order the insert directly via Metav Werkzeuge or contact the consultants for cutting data and application support. WNMG060412-RP5 WPP20G — Trigon 80° indexable turning insert, Tiger‑tec Gold, Walter Tools The WNMG060412-RP5 WPP20G is a trigon 80° indexable insert for steel turning, engineered for general-purpose and semi-finish operations where controlled chips and consistent tool life are priorities. Tiger‑tec Gold coated carbide grade WPP20G Trigon 80° insert for secure seating RP5 chipbreaker for controlled chips 1.2 mm corner radius for robust edge Predictable chip formation that keeps production running The combination of the RP5 chipbreaker with the advanced Tiger‑tec Gold coating delivers reliable chip control and reduced tendency to build up on the cutting edge when machining steel. The coated carbide substrate is designed to withstand typical heat and abrasion in steel turning, which translates into fewer unscheduled tool changes and more continuous spindle hours. For operations that value predictable process windows and reproducible results, this insert supports stable cutting forces and manageable swarf behaviour, making tool path planning and part quality easier to maintain. Stable geometry for interrupted and mixed turning tasks A Trigon 80° form paired with a 0° (negative) rake angle gives the insert mechanical strength at the cutting edge and resistance to edge chipping during interrupted cuts. The 1.2 mm corner radius provides a compromise between edge robustness and surface finish, enabling higher feed rates without sacrificing component integrity. This geometry is particularly suited to medium‑duty turning where tool stability and repeatability are required; the insert’s form factor also simplifies clamping in standard toolholders and supports consistent indexability. Versatile grade for efficient shop-floor integration The WPP20G grade is a coated carbide solution tailored for machining unalloyed and alloyed steels under the ISO P classification. Its balanced properties—wear resistance with adequate toughness—allow productive cutting across a range of steel types, reducing the need for multiple specialised grades. The tolerance class M and the standard insert sizing help with direct replacement in existing toolsets, so shops can improve cycle times and tool life without extensive holder modification. This versatility supports cost‑effective process planning and a steady quality output for batch and single‑piece production alike. For robust steel turning with Tiger‑tec Gold, consult Metav Werkzeuge for application guidance and to request the Walter Tools WNMG060412-RP5 WPP20G insert via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WNMG060412-RP5-WPP20G-WALTER Designation: WNMG060412-RP5 WPP20G Type: Indexable turning insert Brand: Walter Tools Grade: WPP20G Series: Tiger‑tec Gold Core data Insert size: 06 Thickness code: 04 Corner radius: 1.2 mm Rake angle: 0° (negative) Shape: Trigon 80° Tolerance class: M Special features Coating technology: Tiger‑tec Gold Chipbreaker: RP5 Material suitability: Steel (ISO group P) Grade: WPP20G, coated carbide Geometry: negative rake, robust corner radius FAQ What materials is this insert designed for? The WNMG060412-RP5 WPP20G insert is designed primarily for machining steel (ISO P), offering balanced wear resistance and toughness for general turning tasks. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert promotes controlled chip forms and reduced built‑up edge, which helps maintain steady cutting conditions and reduces interruptions for chip clearing. Is the insert suitable for interrupted cuts or roughing? Yes, the Trigon 80° geometry combined with a 0° negative rake and a 1.2 mm corner radius provides the mechanical strength and edge robustness needed for interrupted cuts and many roughing operations. Can this insert be used in standard toolholders? The insert follows common sizing conventions (06 insert size, thickness code 04) and tolerance class M, enabling straightforward integration into standard turning toolholders for indexed use. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG060412-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the RP5 chipbreaker for consistent steel machining and extended tool life; the robust Trigon 80° geometry and 1.2 mm corner radius give secure engagement and process stability. Order the WNMG060412-RP5 WPP30G turning insert directly via Metav Werkzeuge or request application support from our consultants. WNMG060412-RP5 WPP30G – Trigon 80° turning insert, Tiger·tec Gold (Walter Tools) The WNMG060412-RP5 WPP30G is a negative 0° trigon insert designed for efficient machining of steel, providing reliable chip control and durable cutting performance for roughing and medium finishing operations. Tiger·tec Gold coating for long tool life RP5 chipbreaker optimised for steel machining Trigon 80° form for robust cutting performance Corner radius 1.2 mm for stable engagement Consistent chip control and productive steel machining The combination of the RP5 chipbreaker with the Tiger·tec Gold technology enables controlled chip formation when machining steel, reducing the risk of chip-related interruptions and improving process reliability. The chip geometry is designed to break and evacuate chips efficiently under typical steel cutting conditions, which supports steadier cycle times and fewer unplanned tool changes. This results in more consistent surface quality and reduced downtime during batch or single-part production runs. Coated carbide grade balanced for wear resistance and toughness The insert is made in the WPP30G grade, a coated carbide formulation within the Tiger·tec Gold series that balances wear resistance and toughness for common steel applications. The coating enhances thermal resistance and reduces flank wear, extending the useful life of the cutting edge under typical turning conditions. For operations where a combination of durability and repeatable edge integrity is required, the grade offers an economical route to longer tool life and stable performance. Geometry engineered for strength and secure engagement The Trigon 80° form with a 1.2 mm corner radius provides a robust cutting edge and improved support at the insert corner, making it suitable for interrupted cuts and heavier engagement depths. The 0° (negative) clearance angle increases edge strength and reduces susceptibility to chipping, which is especially beneficial when machining tougher steel grades or when stability is a priority. The compact insert size and standard thickness contribute to compatibility with a wide range of turning tool holders while maintaining a secure seating and reliable repeatability. Application focus and process advantages Engineered primarily for the ISO P group (steel), this insert excels in roughing and medium finishing where process security and predictable tool life are important. The Tiger·tec Gold series promotes consistent performance across different batch sizes and cutting conditions, supporting productivity improvements and machining stability. Where chip control, tool life and repeatable surface finish are key purchase drivers, the insert represents a practical choice within a cost-effective production strategy. For specification advice, availability or to discuss the best grade for a given steel application with Metav Werkzeuge, contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical consultation and supply options. Technical Data Article number: WNMG060412-RP5-WPP30G-WALTER Designation: WNMG060412-RP5 WPP30G Product type: Turning insert (indexable insert) Brand: Walter Tools Series/grade: Tiger·tec Gold / WPP30G Chipbreaker: RP5 Insert form: Trigon 80° Execution: G Facts Corner radius: 1.2 mm Clearance angle: 0° (negative) Insert size: 06 Thickness: 04 Tolerance class: M Special features Coated carbide Optimised for steel (ISO P) Robust Trigon 80° geometry Designed for process-stable chip control Suitable for roughing and medium finishing FAQ What materials is this insert suitable for? The WNMG060412-RP5 WPP30G insert is formulated for machining steel (ISO group P) and is optimised to handle the heat and chip formation typical of steel turning. What does the RP5 chipbreaker deliver? The RP5 chipbreaker on the WNMG060412-RP5 WPP30G promotes reliable chip breaking and evacuation during steel cutting, improving process stability and surface consistency. How does the Tiger·tec Gold coating benefit the application? Tiger·tec Gold on the WPP30G grade increases thermal and wear resistance of the coated carbide, delivering longer tool life and more predictable edge performance in turning operations. Which operations are recommended for this insert? This indexable insert is designed primarily for roughing and medium finishing of steel components, where strength at the cutting edge and controlled chip formation are required. Is the geometry suitable for interrupted cuts? Yes, the Trigon 80° form combined with a 1.2 mm corner radius and a negative 0° clearance angle provides enhanced edge strength and stable engagement for interrupted or heavy cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are cited for explanation and identification purposes only and do not imply any affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
WNMG080404-FM5 WMP20G G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP20G grade and the FM5 chipbreaker for stable chip control and extended tool life in rostfreier Stahl turning; order the insert or request application advice via Metav Werkzeuge for reliable production results. WNMG080404-FM5 WMP20G turning insert — Trigon 80°, 0.4 mm radius (Walter Tools) A WNMG080404-FM5 WMP20G is a trigon 80° indexable turning insert designed for robust machining of rostfreier Stahl in medium to heavy cutting conditions. Tiger·tec Gold coated carbide grade WMP20G Optimised FM5 chipbreaker for rostfreier Stahl Trigon 80° form with 0.4 mm corner radius 0° negative rake for stable cutting performance Durable coating and grade for demanding rostfreier Stahl work The Tiger·tec Gold coating in combination with the WMP20G grade provides a wear-resistant, multi-layer surface that supports stable chip formation and consistent edge life when machining rostfreier Stahl. Coated carbide engineering reduces adhesion and builds-up edge tendency, so the cutting edge remains serviceable for longer periods under heat‑generating conditions. For production environments, this translates into fewer tool changes and improved process reliability without compromising surface quality. Geometry engineered for chip control and edge strength The Trigon 80° geometry and FM5 chipbreaker are balanced to deliver a repeatable cutting pattern and controlled chip flow in demanding operations. A 0.4 mm corner radius adds edge robustness, while the 0° negative rake strengthens the cutting edge against shock and vibration in heavier cuts or interrupted machining. Together these features help maintain a consistent cut depth and reduce the risk of edge chipping, resulting in predictable component tolerances and reduced rework. Practical benefits for workshop productivity As an indexable insert, the part offers quick edge renewal and straightforward handling on standard toolholders, improving up‑time and throughput. The combination of grade and geometry supports both semi‑finish and more robust turning tasks on rostfreier Stahl, delivering improved surface finish and process security. For engineers and supervisors, the main advantage is a lower total cost of ownership through longer tool‑life, fewer interventions and stable part quality under varying production loads. Clear suitability and application guidance This insert is specifically formulated for rostfreier Stahl machining and performs best under medium to robust conditions where heat and adhesion are primary concerns. The FM5 chipbreaker aids reliable chip evacuation and reduces the chance of material welding to the edge. For unfamiliar tool setups, matching the insert to the correct toolholder and machine parameters will ensure optimal results; specify the insert's designation when consulting tool selection charts or service teams. For tailored application advice or to secure Walter Tools Tiger·tec Gold turning inserts for rostfreier Stahl machining, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — request the WNMG080404-FM5 WMP20G for detailed compatibility checks and ordering. Technical data Article number: WNMG080404-FM5-WMP20G-WALTER Designation: WNMG080404-FM5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Corner radius: 0.4 mm Free rake angle: 0° (negative) Insert form: Trigon 80° Plate size code: 08 Thickness code: 04 Special features Chipbreaker: FM5 Grade: WMP20G (coated carbide) Material application: rostfreier Stahl Tolerance class: M FAQ What materials is this insert suitable for? The WNMG080404-FM5 WMP20G turning insert from Walter Tools is optimised for rostfreier Stahl and is intended for medium to robust cutting conditions where secure chip control is required. What benefit does the FM5 chipbreaker provide? The FM5 chipbreaker on this Walter Tools insert improves chip control and evacuation when machining rostfreier Stahl, reducing the likelihood of material adhesion and supporting a stable cutting process. How does a 0° negative rake affect cutting performance? A 0° negative rake increases edge strength and resistance to chipping, which is advantageous in tougher cuts or interrupted machining; it trades a small increase in cutting force for greater robustness and reliability. Is this insert suitable for finishing operations? Yes, the combination of Tiger·tec Gold coating and the WMP20G grade can achieve good surface quality; however, best results depend on machine stability and correct cutting parameters for rostfreier Stahl. How is the insert indexed or replaced in the toolholder? The insert is an indexable type; when one cutting edge is worn, the insert is rotated or replaced to present a fresh edge, minimising downtime and simplifying tool management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080404-FM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge life, tailored chip control and compatibility with rostfreier Stahl for trouble‑free turning operations. Order the WNMG080404-FM5 WMP20S directly via Metav Werkzeuge or consult the team for application advice. WNMG080404-FM5 WMP20S — Tiger·tec Silver Trigon 80° turning insert by Walter Tools The WNMG080404-FM5 WMP20S is a trigon‑shape indexable turning insert designed for medium to heavy machining of rostfreier Stahl, featuring the Tiger·tec Silver coating and FM5 chipbreaker WNMG080404-FM5 WMP20S turning insert Tiger·tec Silver coating for stable edge Designed for rostfreier Stahl machining Trigon 80° shape with 0.4 mm corner radius Longer tool life in demanding stainless applications The combination of the Tiger·tec Silver coating and the WMP20S carbide grade delivers improved wear resistance and stable cutting edges when working with rostfreier Stahl. Coating technology reduces the thermal and mechanical stress on the cutting edge, which lowers flank wear and extends service intervals. For production environments where consistent component quality and uptime matter, this insert helps maintain cycle times and reduces regrind or replacement frequency. The trigon geometry contributes to uniform load distribution, which supports repeatable performance under medium to robust cutting conditions. Reliable chip control and improved surface integrity Equipped with the FM5 chipbreaker and a 0° (negative) rake, the insert promotes secure chip formation when machining ductile, work‑hardening materials. Controlled chip segmentation minimises built‑up edge and reduces the risk of scratch marks on the workpiece, so a high‑quality surface finish is more readily achieved in fewer passes. The modest 0.4 mm corner radius balances edge strength and finish capability, providing resistance to edge chipping while enabling acceptable surface quality on internal and external turning operations. Practical geometry and workshop compatibility The Trigon 80° shape provides a positive compound of accessibility and strength for a range of turning tasks, including shoulder cuts and profiling where approach angles matter. The insert thickness and form correspond to common toolholder families, simplifying inventory management and tool changeover. Marked as a standard indexed insert, it offers straightforward seating and repeatability during index changes, supporting a dependable production rhythm with minimal operator adjustment. Application advice and process reliability This grade is optimised for rostfreier Stahl and is intended for users seeking a compromise between edge robustness and economical tool life. The coated WMP20S grade supports stable chip control across a wide set of stainless alloys, helping to avoid frequent interruptions for chip clearance. For new applications, begin with conservative cutting data and adjust speeds and feeds while monitoring edge condition; the insert’s design helps absorb process variability and contributes to predictable outcomes. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts, application parameters and secure procurement via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: WNMG080404-FM5-WMP20S-WALTER SKU: WNMG080404-FM5-WMP20S-WALTER Brand: Walter Tools Facts Insert size: 08 Thickness: 04 Corner radius: 0.4 mm Insert form: Trigon 80° Rake angle: 0° (negative) Special features Grade: WMP20S Coating/series: Tiger·tec Silver Chipbreaker: FM5 Suitable material group: rostfreier Stahl Execution: G FAQ What materials is this insert intended for? The WNMG080404-FM5 WMP20S is specified for machining rostfreier Stahl and is formulated to support stable chip formation and edge life in such alloys. Which chipformer does the insert use and what is its benefit? The insert uses the FM5 chipbreaker, which encourages segmented, controllable chips and reduces the likelihood of built‑up edge when cutting ductile stainless materials. What does the Trigon 80° shape mean for turning operations? The Trigon 80° geometry provides a blend of accessibility and edge strength, making the insert versatile for shoulder turning and profiling while maintaining rigidity. How large is the corner radius and how does it affect finish? The corner radius is 0.4 mm; this radius increases edge strength to resist chipping while still enabling acceptable surface finish on a variety of turning tasks. Is this a coated insert and what advantage does the coating provide? Yes, the WMP20S belongs to the Tiger·tec Silver series; the coating enhances thermal and abrasive resistance, supporting longer tool life and consistent performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080404-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the FM5 chipbreaker for reliable, long-running performance when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult their technical team for process integration. WNMG080404-FM5 WSM01 Trigon 80° indexable insert for stainless steel and superalloys — Walter Tools The WNMG080404-FM5 WSM01 is a Trigon 80° turning insert designed for heavy and interrupted cuts in stainless steel and heat‑resistant superalloys, providing robust edge security and controlled chip formation. Tiger‑tec Silver coating for high wear resistance FM5 chipbreaker for secure chip control Trigon 80° form for robust cutting edge 0° negative rake angle for heavy interrupted cuts High productivity through a wear‑resistant grade and geometry The WNMG080404-FM5 WSM01 turning insert combines a coated carbide grade with the Tiger‑tec Silver finish to extend tool life under demanding conditions. The coated substrate and optimised grade promote stable wear behaviour, which reduces unplanned tool changes and improves uptime. For manufacturers working with stainless steel or superalloys, the grade supports consistent cutting performance, meaning fewer interruptions to production and better utilisation of machining centres. The robust trigon geometry contributes to edge strength while maintaining acceptable cutting forces for both roughing and semi‑finishing operations. Improved surface quality and dimensional stability from geometry control The Trigon 80° shape and a corner radius of 0.4 mm help maintain a stable cutting edge that delivers repeatable surface finish and dimensional control. The 0° (negative) rake angle increases edge security for interrupted or heavy cuts, reducing the risk of chipping and improving the reliability of the process. When replaced at regular intervals, this insert yields consistent component tolerances and minimises rework. The tolerance class M ensures predictable fit in standard toolholders, supporting smooth tool changeovers and straightforward process documentation. Secure chip formation for continuous, predictable machining Equipped with the FM5 chipbreaker, the insert generates short, controllable chips when machining the ISO groups M (stainless steel) and S (superalloys and titanium). The chipformer design reduces the likelihood of entangling or long, stringy chips that can disrupt automated production. Stable chip control contributes directly to safer, cleaner workpieces and less interruption to automated handling systems, thereby increasing effective machine run times and lowering downstream cleaning or inspection effort. Practical integration into production workflows With the standardised size code (08) and thickness code (04), the insert fits common toolholders used for indexable turning applications and supports straightforward stocking and scheduling. The combination of a robust grade, defined corner radius and FM5 geometry makes the insert suitable for a range of turning tasks from medium roughing to finishing passes on challenging materials. For process engineers, the predictable behaviour of this insert simplifies parameter setting and reduces trial cycles, enabling faster ramp‑up of new production jobs and more consistent part quality. Specify the Walter Tools WNMG080404-FM5 WSM01 with Tiger‑tec Silver via Metav Werkzeuge for optimised machining of stainless steel and superalloys — contact Metav Werkzeuge for tailored process advice Technical data SKU: WNMG080404-FM5-WSM01-WALTER Article designation: WNMG080404-FM5 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Product type: Drehwendeschneidplatte Facts Size code: 08 Thickness code: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Insert form angle: 80° Special features Coated carbide grade WSM01 FM5 chipbreaker Suitable for stainless steel (ISO M) and superalloys/titanium (ISO S) Trigon 80° insert form Tolerance class M FAQ What materials is this insert suitable for? The WNMG080404-FM5 WSM01 from Walter Tools is designed for stainless steel (ISO M) and heat‑resistant superalloys/titanium (ISO S), offering reliable chip control and wear resistance for these groups. How does the FM5 chipbreaker improve machining? The FM5 chipbreaker on this turning insert produces short, broken chips and stabilises chip flow, which reduces interruptions and improves safety in continuous machining operations. What benefits does the Trigon 80° form provide? The Trigon 80° geometry offers a robust cutting edge and high strength, ideal for interrupted cuts and applications where edge security and tool life are priorities. Can this insert be used for heavy interrupted cuts? Yes, the 0° negative rake angle and the solid corner radius make the insert suitable for heavy and interrupted cuts, providing increased edge stability under shock loads. What does tolerance class M mean for toolholders? Tolerance class M indicates the insert conforms to a medium tolerance standard for seat and fit, ensuring consistent seating in compatible indexable toolholders for predictable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for clarification of product origin only; there is no affiliation implied between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
WNMG080404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of a wear‑resistant Tiger·tec Silver coating and the heat‑tolerant WSM10S grade for reliable machining of demanding alloys; the Trigon 80° geometry with a 0.4 mm corner radius gives robust edge life and consistent chip control. Order the WNMG080404‑FM5 WSM10S directly via Metav Werkzeuge or consult our specialists for application support. WNMG080404‑FM5 WSM10S Trigon 80° turning insert — Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) WNMG080404‑FM5 WSM10S is a negative‑rake Trigon insert designed for stable machining of rostfreier Stahl and heat‑resistant alloys, optimised for secure chip control and long tool life. Tiger·tec Silver coating for high process security WSM10S grade for rostfreier Stahl and superalloys Trigon 80° form for robust turning operations FM5 chipbreaker for controlled chip formation Improved cutting performance through advanced coating technology The Tiger·tec Silver coating combined with the WSM10S substrate provides a balance of thermal resistance and edge stability that suits difficult‑to‑machine materials. For components made from rostfreier Stahl or high‑temperature nickel‑base alloys, the coated carbide supports stable cutting at increased temperatures, reducing the tendency for built‑up edge and premature flank wear. This results in more predictable tool life and fewer unplanned tool changes, which helps maintain production throughput and lowers overall machining costs. Geometry that increases process reliability and tool life The insert’s Trigon 80° shape and 0° (negative) rake deliver a strong cutting edge and positive engagement in interrupted cuts. The 0.4 mm corner radius enhances edge robustness during heavy cuts, while the FM5 chipbreaker manages swarf for improved surface finish and safer evacuation. As an indexable insert, it provides quick replacement and repeatable performance, allowing consistent part quality across batches and simplifying tool management in the workshop. Practical application guidance for production environments Select this insert for turning operations on rostfreier Stahl and superalloys where reliable chip control and tool life are priorities. The combination of coating and chipbreaker is aimed at preventing edge deformation and ensuring dimensional stability over longer cycles. In process planning, pairing the insert with suitable holder rigidity and coolant strategy will enhance the benefits; the insert’s design supports both continuous and slightly interrupted cuts while preserving surface integrity and repeatability. Productivity advantages and shop‑floor confidence Using a dedicated grade like WSM10S reduces process variability and contributes to consistent component quality. The design and coating are intended to lower scrap rates and reduce downtime for tool changes, which translates into improved productivity and cost efficiency. For production teams seeking steady, reproducible results on demanding materials, the insert offers a pragmatic balance of durability and performance. For tailored machining advice or to request application‑specific recommendations for the Walter Tools Tiger·tec Silver WNMG080404‑FM5 WSM10S insert, contact Metav Werkzeuge for expert support and availability information Technical data Article number: WNMG080404‑FM5‑WSM10S‑WALTER Label: Drehwendeschneidplatte WNMG080404‑FM5 WSM10S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Insert form: Trigon 80° Size code: 08 Thickness code: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Chipbreaker: FM5 Grade: WSM10S Series: Tiger·tec Silver Material groups: S / M Special features Coating: Tiger·tec Silver Substrate: coated cemented carbide Suitable for: rostfreier Stahl Suitable for: heat‑resistant superalloys and titanium alloys (S) Application focus: secure chip formation and edge stability Tolerance class: M Execution: G FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The WNMG080404‑FM5 WSM10S insert is designed specifically to perform well on rostfreier Stahl, offering thermal resistance and stable cutting behaviour. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the insert reduces friction and improves thermal stability, which helps maintain a sharp cutting edge when turning difficult materials. Can this insert handle interrupted cuts or heavy roughing? The Trigon 80° geometry and 0.4 mm corner radius provide enhanced edge strength, making the insert suitable for applications with interrupted cuts and heavier machining tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080404-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and reliable edge life to secure consistent turning performance on difficult-to-machine materials. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. WNMG080404-FM5 WSM20S — Turning insert, Tiger-tec Silver, Trigon 80° (Walter Tools) The WNMG080404-FM5 WSM20S is a triangular 80° coated carbide turning insert engineered for heavy-duty and finish turning of stainless steel and heat-resistant superalloys. Tiger·tec Silver coating for extended tool life Designed for stainless steel and superalloys FM5 chipbreaker for controlled chip formation Negative 0° rake for secure, stable cutting Longer tool life through advanced coating and grade The combination of the Tiger·tec Silver coating with the WSM20S grade provides a balance of thermal resistance and edge stability that benefits long uninterrupted cuts. The coated carbide composition means improved resistance to abrasive wear and thermal cracking compared with uncoated grades. For operations involving stainless steel or heat-resistant alloys, this results in fewer insert changes and more consistent component quality. The applied coating technology supports a reliable cutting edge under elevated temperatures, which in turn reduces the frequency of tool interventions and helps to keep production running smoothly. Geometry that improves process stability and surface quality The Trigon 80° form together with the FM5 chipbreaker and a 0.4 mm corner radius is tailored to combine rigidity and chip control. The negative 0° (negativ) rake angle increases edge strength for interrupted cuts and heavy cross-sections, while the chipbreaker promotes predictable chip breaking and evacuation. These attributes reduce vibrations and the risk of build-up on the cutting edge, which produces more repeatable surface finishes and lowers the need for manual rework. In practical terms, the geometry supports both secure roughing passes and controlled finishing, depending on the chosen cutting data. Reliable productivity and clear application range With tolerance class M and the specification aimed at groups S and M (titanium/superalloys and stainless steels), the insert suits machining tasks where heat and workpiece toughness place high demands on the tool. The FM5 chip control and the WSM20S coated carbide together contribute to predictable wear behaviour and extended effective life per insert, improving overall cost-efficiency in production. The insert's design permits consistent tool performance on CNC lathes and turning centres, supporting stable process windows and reducing unplanned downtime. For customers seeking process security and repeatability, this insert offers a robust option within the Tiger·tec Silver family. Contact Metav Werkzeuge today for tailored cutting data and to discuss the best insert geometry for the intended stainless steel or superalloy application — consultants are available by e‑mail or phone to advise on tooling strategies Technical data Article number: WNMG080404-FM5-WSM20S-WALTER Label: Drehwendeschneidplatte WNMG080404-FM5 WSM20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM20S Execution: G Core specifications Corner radius: 0.4 mm Free angle: 0° (negativ) Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Tolerance class: M Designs and special features Coating: Tiger·tec Silver Chipbreaker: FM5 Material suitability: S / M Intended materials: stainless steel and heat-resistant superalloys (S) Geometry: Negative rake, robust edge for interrupted cuts FAQ What materials is this insert suitable for? The WNMG080404-FM5 WSM20S turning insert (Walter Tools) is specified for stainless steel and for heat-resistant superalloys/titanium as indicated by its S / M suitability. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WSM20S grade enhances thermal and abrasive resistance, improving edge life and enabling longer uninterrupted cutting periods in demanding turning tasks. What is the advantage of the FM5 chipbreaker? The FM5 chipbreaker is designed to promote consistent chip formation and evacuation, which reduces build-up and helps to maintain a stable cutting edge for improved surface quality. Can this insert handle interrupted cuts? Yes, the negative 0° rake and the robust Trigon 80° geometry of the WNMG080404-FM5 insert provide increased edge strength suitable for interrupted and heavy turning operations. What does tolerance class M indicate for this insert? Tolerance class M denotes the manufacturing precision of the insert; in practice it supports consistent seating and repeatable performance in tool holders and turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080404-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of cermet grade WEP10C, a Trigon 80° geometry and the FP5 chipbreaker for stable, productive finishing cuts; order directly via Metav Werkzeuge or consult our specialists for tailored tooling advice. WNMG080404-FP5 WEP10C — Indexable turning insert, Trigon 80°, Walter Tools WNMG080404-FP5 WEP10C is a trigon 80° indexable turning insert in a cermet grade, engineered for productive finishing and repeatable edge life in precision turning applications Trigon 80° insert geometry Cermet grade WEP10C for durable edge Negative 0° rake for stable cuts FP5 chipbreaker for controlled chips High-performance finishing with cermet technology The WEP10C cermet grade delivers high wear resistance and a fine edge stability that benefits finishing operations. As a cermet material, it combines ceramic hardness with metallic toughness to maintain a sharp cutting edge over extended cycles, which reduces dressing frequency and contributes to consistent surface quality. This behaviour makes the insert particularly suited to operations where minimal flank wear and steady dimensional control are priorities. The combination of material and geometry supports a reliable process window for many production environments. Geometry and chip control for stable machining The Trigon 80° form, coupled with a 0° (negative) rake and the FP5 chipbreaker, provides a balance of rigidity and chip management. The trigon outline offers strong cutting-edge support and multiple indexable corners per insert, while the negative rake increases edge strength for interrupted or heavier cuts. The FP5 chipbreaker is designed to segment and evacuate chips effectively, lowering the risk of built-up edge and improving tool life. For operators less familiar with the terms, negative rake means the insert presents a stronger cutting edge at the point of contact, which reduces chipping under load. Integration into production and process advantages With a corner radius of 0.4 mm, thickness code 04 and size code 08, this insert fits standard toolholders that accept WNMG-style plates and supports repeatable set-up within tolerance class M. The Walter Cermet series offers a predictable performance profile that simplifies tool choice and inventory planning when paired with compatible holders. Note that final material suitability should be verified against the manufacturer's product matrix to match workpiece alloys and cutting parameters. Using inserts with stable edge behaviour and controlled chip formation can shorten cycle times and increase overall process economy. Contact Metav Werkzeuge today for application-specific recommendations or to request the product documentation and compatible toolholder options; Metav Werkzeuge can advise on the optimal parameters for integrating this Walter Tools insert into existing production lines Technical data Article number: WNMG080404-FP5-WEP10C-WALTER Designation: WNMG080404-FP5 WEP10C Manufacturer: Walter Tools Series: Walter Cermet Execution: G Facts Plate form: Trigon 80° Free angle: 0° (negativ) Corner radius: 0.4 mm Plate size code: 08 Plate thickness code: 04 Chipbreaker: FP5 Tolerance class: M Special features Cermet grade WEP10C Indexable turning insert High wear resistance and edge stability Designed for finishing and precision turning Multiple indexable corners for economical use FAQ What cutting tasks suit this insert best? The WNMG080404-FP5 WEP10C is intended for finishing and precision turning tasks where a stable edge and good surface finish are required; final suitability depends on the workpiece material and should be checked against the Walter Cermet product matrix. Can this insert handle interrupted cuts? Yes, the negative 0° rake and robust trigon geometry give the insert enhanced edge strength for interrupted or variable engagement conditions. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built-up edge and helping to maintain consistent tool life and surface quality when using the WEP10C grade. Is there a recommendation for toolholder compatibility? The insert follows the WNMG indexable plate form and fits holders designed for Trigon 80° WNMG plates; check holder compatibility and clamping style to ensure correct seating and clamping force. Where can detailed cutting data be obtained? Cutting data and the manufacturer’s material matrix for the Walter Cermet series are available from Walter Tools; Metav Werkzeuge can also provide application guidance and parameter suggestions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the brands named. The item offered is original, brand-new goods of the manufacturer.
WNMG080404-FP5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP01G grade for reliable performance when machining steel and cast iron; the trigon geometry and FP5 chipbreaker ensure robust chip control and consistent surface quality. Order the WNMG080404-FP5 WKP01G insert directly via Metav Werkzeuge or consult the in-house advisors for application-specific recommendations. WNMG080404-FP5 WKP01G indexable turning insert — Tiger·tec Gold, Trigon 80° (Walter Tools) The WNMG080404-FP5 WKP01G is an indexable turning insert engineered for productive turning of steel and cast iron, combining a coated-carbide grade with a dedicated chipbreaker and a robust trigon geometry Tiger·tec Gold coating for extended life Trigon 80° geometry for robust turning WKP01G grade suitable for steel and cast iron 0.4 mm corner radius for stable edge Increased tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP01G coated carbide grade provides measurable improvements in wear resistance and process stability during turning operations. The coating reduces adhesive and abrasive wear at the cutting edge, which extends service intervals and supports higher cutting speeds where appropriate. Paired with the FP5 chipbreaker, this configuration promotes controlled chip formation and reduces the risk of built-up edge on components made from steel and cast iron, resulting in steadier productivity and more predictable tool life. Geometry and edge design for dependable machining The Trigon 80° shape together with a 0.4 mm corner radius and negative 0° rake form a geometry that resists chipping in interrupted cuts and heavy engagement conditions. The compact trigon footprint increases insert strength and distributes cutting forces across a larger core area, which is advantageous in heavier cuts and seatings that demand rigidity. These features contribute to consistent component tolerances and reduced rework, delivering practical benefits in both small-batch and serial production environments. Efficient chip control and surface finish for industrial use The FP5 chipbreaker is tuned to the grade and geometry to promote short, controlled chips when machining typical ISO P and ISO K materials. Better chip control minimises manual intervention at the machine, improves surface integrity and simplifies downstream handling. For processes where consistent surface finish and minimal secondary operations are priorities, this insert offers a balance of performance and economy, allowing machinists and process planners to focus on cycle-time optimisation rather than frequent insert changes. Reliable integration into standard tooling systems Designed as a standard WNMG form factor, this insert fits commonly used toolholders for turning applications and supports quick indexability to restore a fresh cutting edge without complex regrinding. The engineering behind the grade and coating prioritises repeatable performance across batches and provides stable edge condition over multiple indexing cycles. Walter Tools’ background in precision tool development adds an additional assurance of manufacturing quality and consistent geometry specification for industrial environments. Contact Metav Werkzeuge for tailored application advice or to order the WNMG080404-FP5 WKP01G insert directly; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080404-FP5-WKP01G-WALTER Name / type: WNMG080404-FP5 WKP01G — indexable turning insert Series: Tiger·tec Gold Core specifications Shape: Trigon 80° Corner radius: 0.4 mm Thickness: 0.4 mm (04) Grade: WKP01G Chipbreaker: FP5 Rake: 0° (negative) Tolerance class: M Materials / Features Applicable material groups: P (steel), K (cast iron) Coating: Tiger·tec Gold (coated carbide) Form designation: WNMG080404-FP5 Manufacturer: Walter Tools FAQ Which materials are recommended for this insert? The WNMG080404-FP5 WKP01G insert is formulated for steel (ISO P) and cast iron (ISO K) applications; the WKP01G grade and Tiger·tec Gold coating address the typical wear mechanisms of these material groups. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WKP01G grade reduces abrasive and adhesive wear, supporting higher cutting speeds and improved tool life when machining steel and cast iron with the WNMG080404-FP5 insert. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker is designed to produce controlled, short chips in common turning operations, improving chip evacuation and reducing manual cleaning at the machine when using the WNMG080404-FP5 WKP01G. Is this insert suitable for interrupted cuts or heavy roughing? Yes; the Trigon 80° geometry combined with a 0.4 mm corner radius and negative rake offers robustness and resistance to chipping, making the insert appropriate for more demanding engagement conditions. Which toolholders are compatible with the WNMG080404-FP5 format? The WNMG080404-FP5 form factor matches standard WNMG toolholders commonly used in turning operations; compatibility depends on the holder clamping style and seat dimensions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
WNMG080404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, precise FP5 chip control and the stable Trigon 80° geometry to keep turning operations productive and predictable; order through Metav Werkzeuge or consult our specialists for cutting data and availability. WNMG080404-FP5 WPP10G – indexable turning insert, Tiger‑tec Gold, Walter Tools A premium indexable turning insert for steel machining, WNMG080404-FP5 WPP10G, designed for stable, high‑productivity turning with optimised chip control and long tool life Tiger‑tec Gold coating for long tool life Optimised FP5 chipbreaker for controlled chips Trigon 80° negative geometry for high stability Suitable for machining steel, ISO group P Consistent wear resistance for continuous production The combination of the Tiger‑tec Gold coating and the WPP10G grade yields noticeably improved wear resistance and thermal stability during steady metal‑cutting operations. Coated carbide technology reduces flank and crater wear under typical steel turning conditions, which supports longer tool life and fewer index changes. This results in reduced downtime and more predictable production cycles, a tangible advantage for workshops focused on throughput and component consistency. Predictable chip formation and process security The dedicated FP5 chipbreaker is engineered to produce short, manageable chips when machining steels in ISO P. Controlled chip formation reduces the risk of entanglement and improves surface integrity, contributing directly to process reliability on lathes and turning centres. The insert’s negative geometry further enhances stability under interrupted cuts, making it well suited for medium to heavy turning tasks where reliable chip control is essential. Geometry that improves clamping stability and surface finish The Trigon 80° form, combined with a negative geometry, provides a large contact area in the pocket for secure clamping and superior cutting edge support. The 0.4 mm corner radius balances edge strength and the ability to achieve consistent surface finishes, especially on turned parts where dimensional accuracy and repeatable quality matter. This geometry helps maintain edge integrity when machining a range of steel grades. Application focus and machining advantages Specifically developed for steels (ISO group P), the insert’s coated carbide composition and chipbreaker design enable higher metal removal rates while maintaining surface quality. Use of this insert supports higher process stability and can reduce the number of tool variants required across common steel applications. For manufacturers prioritising efficiency and reproducibility, the insert contributes to improved cycle times and a more economical tool inventory. For tailored machining recommendations or to discuss Walter Tools Tiger‑tec Gold inserts for specific steel grades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and stock information. Technical data Article number: WNMG080404-FP5-WPP10G-WALTER Designation: WNMG080404-FP5 WPP10G Series: Tiger‑tec Gold Facts Corner radius: 0.4 mm Insert size: 8 mm Thickness: 4 mm Free angle: 0° (negative) Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: FP5 Geometry: Trigon 80° Suitable material group: Steel (ISO P) Negative insert for enhanced stability Manufacturer: Walter Tools FAQ Which materials is this insert intended for? The WNMG080404-FP5 WPP10G is intended primarily for machining steels classified in ISO group P; the WPP10G grade and coating optimise performance for these materials. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on this Walter Tools insert promotes short, controllable chips and improved surface integrity, which aids continuous production and reduces chip management issues. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold increases thermal and abrasive resistance, extending tool life under the typical heat and stresses of steel turning operations and supporting more consistent cutting performance. Is the negative 0° geometry advantageous for interrupted cuts? Yes; the negative geometry and Trigon 80° form enhance clamping support and edge strength, improving stability when facing interrupted cuts or higher loads. Can this insert be used on small lathes and larger turning centres alike? The insert’s robust design and chip control make it suitable across a range of machines; toolholders and clamping systems should match the Trigon form and insert dimensions for optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080404-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
The Tiger·tec Gold grade and FP5 chipbreaker deliver a cost-effective balance of durability and consistent chip control, optimising cycle times for steel turning; order the insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG080404-FP5 WPP20G turning insert — Tiger·tec Gold, Trigon 80°, for Stahl — Walter Tools The WNMG080404-FP5 WPP20G is a coated carbide turning insert designed for general steel turning with a trigon 80° geometry and an FP5 chipformer for controlled swarf evacuation Tiger·tec Gold coating for extended tool life Suitable for Stahl machining (ISO P) Trigon 80° geometry for stable cutting FP5 chipformer for reliable chip control Higher productivity through advanced grade technology The Tiger·tec Gold WPP20G grade combines a wear-resistant, coated carbide matrix with an optimised microstructure to extend tool life and maintain a steady cutting edge. By using a coated substrate specifically tuned for Stahl, the insert reduces flank wear and maintains dimensional stability over longer tool paths. The result is measurable gains in productivity and fewer index changes, which helps to keep manufacturing cycles predictable and throughput high. Reliable chip control and stable cutting geometry The FP5 chipbreaker, paired with the Trigon 80° shape and a 0° (negative rake) configuration, delivers consistent swarf formation and evacuation in turning operations. A corner radius of 0.4 mm supports edge robustness and contributes to repeatable surface finishes, while the trigon form provides good rigidity in interrupted cuts. These design elements together improve process security and reduce the risk of chatter, enabling stable feeds and cuts in a variety of turning scenarios. Practical benefits for workshop and production planners This insert is specified for the ISO P group and is therefore suited to a broad range of Stahl grades, from unalloyed to alloyed steels. With a medium tolerance class (M) it offers a balance between precision and flexibility for general turning tasks. The combination of the Tiger·tec Gold coating and the FP5 chipformer makes the component particularly effective where consistent surface quality and long edge life are required, reducing tool change frequency and lowering per-part tooling costs. For operations seeking a dependable indexable solution, the insert contributes to predictable process windows and efficient machine utilisation. For high-process reliability choose Walter Tools' Tiger·tec Gold WPP20G inserts; contact Metav Werkzeuge for tailored advice and rapid supply. Technical Data SKU: WNMG080404-FP5-WPP20G-WALTER Article designation: WNMG080404-FP5 WPP20G Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Chipbreaker: FP5 Shape: Trigon 80° Size designation: 08 Thickness designation: 04 Corner radius: 0.4 Rake: 0° (negative) Tolerance class: M Facts Corner radius: 0.4 mm Size designation: 08 Thickness designation: 04 Rake angle: 0° Tolerance: M Special features Coated carbide grade WPP20G Tiger·tec Gold coating technology FP5 chipformer for chip control Trigon 80° geometry for rigidity Suited for ISO P — Stahl machining FAQ What materials is this turning insert suitable for? The insert is specified for ISO P and is therefore suitable for machining a wide range of Stahl grades; the Tiger·tec Gold WPP20G grade is optimised for these materials. What advantage does the FP5 chipbreaker offer? The FP5 chipformer ensures repeatable chip shapes and reliable evacuation, which reduces the risk of swarf-related interruptions and helps to secure surface finish consistency. How does the Trigon 80° geometry affect cutting? The Trigon 80° form provides increased insert rigidity for stable cutting, particularly beneficial in interrupted cuts and when maintaining consistent tool life. Is this insert applicable for finishing operations? Yes; the combination of a 0.4 mm corner radius and a coated grade delivers good surface quality, making the insert suitable for many finishing passes in Stahl. What does the tolerance class M indicate? Tolerance class M represents a medium tolerance level, offering a compromise between dimensional precision and general-purpose flexibility for turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanation only and does not indicate any association between Metav Werkzeuge and the trademark owners. The offered article is an original, brand-new product from the manufacturer.
WNMG080404-FW5 WKP01G WKP01G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKP01G grade for extended tool life and reliable chip control; the Trigon 80° geometry with a 0.4 mm corner radius ensures stable turning of steel and cast iron. Order the inserts via Metav Werkzeuge or consult our specialists for application advice. WNMG080404-FW5 WKP01G — indexable turning insert, Trigon 80°, Tiger·tec Gold — Walter Tools A WNMG080404-FW5 WKP01G indexable turning insert engineered for robust machining of steel and cast iron in medium to heavy turning operations Tiger·tec Gold coating for high wear resistance WKP01G grade optimised for steel and cast iron Trigon 80° form for robust cutting stability FW5 chipbreaker for controlled chip formation High wear resistance and reliable chip control for steel and cast iron The insert combines the Tiger·tec Gold coating with the WKP01G coated-carbide grade to deliver consistent wear resistance and stable chip control when machining ISO groups P (steel) and K (cast iron). The coated substrate is developed to withstand the heat and abrasive conditions typical of steel turning as well as the intermittent, often brittle chips produced when cutting cast iron. This results in predictable tool life and fewer unscheduled tool changes, which supports continuous production and lowers overall machining costs. Geometry designed for edge security and repeatable surface quality The Trigon 80° shape and a 0.4 mm corner radius create a geometry that combines cutting-edge robustness with good surface finish capability. The FW5 chipbreaker is tailored to produce short, manageable chips while maintaining a stable cutting edge. A negative rake (0°) increases edge strength for interrupted cuts and heavy feed conditions. Together these features enable repeatable results across consecutive inserts, reducing variation in component quality and simplifying process planning. Practical benefits for efficient production and straightforward integration Standard WNMG dimensions and the WNMG080404-FW5 designation make the insert compatible with a wide range of turning toolholders, easing integration into existing tool inventories. The combination of coated carbide and the graded design promotes long-term dimensional stability, contributing to reduced setup time and fewer tool changes per shift. For further technical details or data sheets, the supplier can provide tailored machining parameters and recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Contact Metav Werkzeuge for application advice and to source Walter Tools WNMG080404-FW5 WKP01G inserts with Tiger·tec Gold performance Technical Data SKU: WNMG080404-FW5-WKP01G-WALTER Name: Drehwendeschneidplatte WNMG080404-FW5 WKP01G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP01G Execution: G Core parameters Shape: Trigon 80° Size: 08 Thickness: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Materials & features Applicable materials: Steel (P), Cast iron (K) Chipbreaker: FW5 Plate designation without grade: WNMG080404-FW5 Coating/system: Tiger·tec Gold Material of insert: coated carbide FAQ Which materials is this insert optimised for? The WNMG080404-FW5 WKP01G insert is optimised for machining steel (P) and cast iron (K) in accordance with ISO material groupings; the grade and coating balance thermal resistance and abrasion control for these applications. What advantages does the WKP01G grade provide? WKP01G is a Walter Tools coated-carbide grade within the Tiger·tec Gold family that provides high wear resistance and consistent edge stability, helping to extend tool life under typical turning conditions. How does the Trigon 80° form affect machining performance? The Trigon 80° geometry increases cutting-edge robustness and allows higher cutting forces while maintaining a good surface finish; the 0.4 mm corner radius offers strength for interrupted cuts without sacrificing repeatability. What is the role of the FW5 chipbreaker? The FW5 chipbreaker promotes controlled chip formation, producing shorter, safer chips that aid evacuation and contribute to consistent surface quality and tool life in both steel and cast-iron operations. How to verify compatibility with existing toolholders? Check that the toolholder accepts WNMG-style inserts and the indexable insert size 08 with the specified thickness (04) and seat geometry; matching the WNMG designation ensures correct clamping and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com