WNMG080408-FM5 WMP20G G Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge stability and targeted chip control for efficient turning of stainless steel; the coated carbide grade ensures consistent tool life and process security. Order Walter Tools inserts directly via Metav Werkzeuge or consult the technical team for application-specific advice. WNMG080408-FM5 WMP20G (Indexable turning insert) – Tiger·tec Gold, for stainless steel — Walter Tools A WNMG080408-FM5 WMP20G indexable turning insert engineered for medium to robust conditions when machining stainless steel, offering coated-carbide durability and stable chip formation Tiger·tec Gold coating for durable edge Specifically for stainless steel (ISO M) Trigon 80° shape for secure clamping 0° negative rake with 0.8 mm corner radius Consistent cutting performance for stainless steel The WMP20G grade, employed in the Tiger·tec Gold series, is a coated carbide solution optimised for stainless steel. The coating and substrate combination promotes stable chip formation and reduces the tendency for built-up edge under the high heat and toughness typical of these alloys. As a result, predictable cutting behaviour and improved edge life can be expected during continual production runs. This makes the insert suitable for demanding operations that require repeatable surface quality and fewer tool changes, supporting productivity goals without adding process complexity. Secure geometry for repeatable results The Trigon 80° plate form combined with a 0° negative rake gives the insert a robust cutting edge and reliable clamping interface. The integrated FM5 chipbreaker is designed to control chips from interrupted or heavy cuts, while the 0.8 mm corner radius balances edge strength with acceptable cutting forces for medium cuts. Together, these features reduce vibration and support stable machining behaviour, which contributes to more consistent part tolerances and less scrap in serial production. Operators benefit from a geometry that tolerates tougher engagement conditions while simplifying tool selection. Practical advantages for workshop efficiency Standardised form and grade reduce inventory complexity and ease tool management across multiple lathes. The insert's construction supports longer intervals between indexings and replacements, which lowers downtime and increases machining throughput. In addition to machining performance, the coated grade contributes to improved surface finish on components made from stainless steel, lowering the need for secondary operations. For application-specific data or machining parameters, technical consultation is available to align cutting conditions with component requirements and machine capabilities; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Contact Metav Werkzeuge today for ordering and machining recommendations for Walter Tools WNMG080408-FM5 WMP20G inserts and receive expert guidance on integrating them into production workflows Technical Data Article number: WNMG080408-FM5-WMP20G-WALTER Label: Drehwendeschneidplatte WNMG080408-FM5 WMP20G Walter Tools Series: Tiger-tec Gold Grade: WMP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Special features Coated carbide grade Chipbreaker: FM5 Designed for stainless steel (ISO M) Robust cutting edge and stable chip formation Suitable for medium to robust machining conditions FAQ What materials is this insert designed for? The WNMG080408-FM5 WMP20G insert is specified for machining stainless steel (ISO M), providing stable chip control and reliable edge behaviour on these materials. Which geometry ensures clamping security on lathes? The Trigon 80° plate form offers a secure seating and clamping condition; paired with the 0° negative rake, it supports robust cutting and reduced vibration. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker promotes consistent chip formation and evacuation during medium to heavy cuts, helping to maintain surface quality and prolong edge life. Is this insert suitable for high-volume production? Yes, the coated carbide grade and design focus on process security and extended edge life, making the insert a productive choice for series turning of stainless steel components. Where can further technical parameters be obtained? Additional cutting data and application-specific recommendations are available from Metav Werkzeuge; technical enquiries can be directed to info@metav-werkzeuge.com or by telephone at +49 2822 7131930. Die Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. The mentioned brand names are used for explanation only; the offered item is an original factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080408-FM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger·tec Silver grade combined with a secure FM5 chipbreaker and robust Trigon geometry for consistent turning of rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080408-FM5 WMP20S indexable turning insert — Tiger·tec Silver for rostfreier Stahl (Walter Tools) The WNMG080408-FM5 WMP20S is a Trigon 80° indexable insert designed for medium to robust turning applications in rostfreier Stahl, offering coated carbide performance and a secure chip control geometry. Tiger·tec Silver coating for tougher edges WMP20S grade optimised for rostfreier Stahl Trigon 80° geometry with 0.8 mm corner radius FM5 chipbreaker for secure chip control Reliable performance in rostfreier Stahl turning The combination of the Tiger·tec Silver coating with the WMP20S grade delivers improved resistance to wear and heat, which is crucial when machining rostfreier Stahl. Coated carbide reduces the tendency for built-up edge and supports stable chip formation, so that cutting forces remain predictable and tool life is extended under medium to robust cutting conditions. This stability leads to fewer interruptions in production and a more consistent surface finish, helping to maintain throughput in demanding workflows. Geometry engineered for edge security and productivity The insert’s Trigon 80° form and 0.8 mm corner radius provide a mechanically strong cutting edge that tolerates intermittent engagement and elevated loads. A 0° (negative) free angle increases edge support, reducing chipping risk under rough conditions, while the FM5 chipbreaker promotes reliable chip control across a range of depths of cut. In practice, these geometry choices translate into reduced downtime for insert changes and a lower risk of unexpected scrap, supporting a more economic machining process. Practical application and integration guidance Suitable for medium to robust cutting tasks in rostfreier Stahl, this insert is intended for both serial production and smaller batch runs where edge life and process security are priorities. The coated carbide construction adapts well to elevated temperatures associated with stainless machining; practitioners will appreciate the balance between wear resistance and toughness inherent to the grade. For specific tool-holder compatibility or feed and speed suggestions, Metav Werkzeuge can provide targeted advice to integrate the insert into existing tool lines and machining cycles. For reliable rostfreier Stahl turning with the Walter Tools Tiger·tec Silver grade, contact Metav Werkzeuge for tailored application support and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: WNMG080408-FM5-WMP20S-WALTER Type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Series: Tiger·tec Silver Facts ISO designation: WNMG080408-FM5 WMP20S Grade: WMP20S Chipbreaker: FM5 Plate form: Trigon 80° Corner radius: 0.8 mm Plate size: 08 Plate thickness: 04 Free angle: 0° (negative) Special features Coated carbide (Tiger·tec Silver) Optimised for rostfreier Stahl Designed for medium to robust cutting conditions Stable chip formation and secure edge behaviour FAQ What materials is this insert designed for? The WNMG080408-FM5 WMP20S insert is optimised for machining rostfreier Stahl and is specified for medium to robust cutting conditions. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker on the WNMG080408-FM5 WMP20S enhances chip control and reduces the risk of long, tangled chips, improving process reliability during turning operations. What does the 0° (negative) free angle mean for edge life? A 0° (negative) free angle increases edge support, which reduces susceptibility to chipping under heavy loads; this contributes to longer, more predictable tool life for the WNMG080408-FM5 WMP20S. Is this insert suitable for interrupted cuts? Yes, the Trigon 80° geometry with a 0.8 mm corner radius and a negative free angle makes the insert well suited to interrupted and robust turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
WNMG080408-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, precise chip control and a robust trigon geometry for reliable machining of stainless steels and heat‑resistant alloys; order the WNMG080408‑FM5 WSM01 indexable insert via Metav Werkzeuge or consult the sales team for application support. WNMG080408-FM5 WSM01 trigon turning insert, Tiger‑tec Silver, for stainless steels and superalloys — Walter Tools The WNMG080408-FM5 WSM01 is a trigon‑shaped indexable turning insert engineered for stable cutting in rostfrei and high‑temperature alloys, combining a Tiger‑tec Silver coating with an FM5 chipbreaker for secure material removal Tiger‑tec Silver coated carbide For stainless and superalloys (ISO M, S) Trigon 80° geometry, 0° negative rake Stable chip formation with FM5 breaker Consistent productivity through optimised coating and grade The combination of Tiger‑tec Silver coating and the WSM01 grade provides enhanced thermal resistance and wear behaviour when machining stainless steels and superalloys. This coated carbide chemistry supports a stable chip formation under elevated temperatures, which reduces unplanned interruptions and contributes to predictable tool life. The FM5 chipbreaker is designed to generate controllable chips across a range of feeds, improving swarf evacuation and decreasing the risk of built‑up edge. The result is a measurable increase in process security and a more consistent surface quality on demanding workpieces. Geometry engineered for robust cutting forces and surface quality The Trigon 80° form with a 0° negative rake delivers a favourable balance between edge strength and cutting action, while the 0.8 mm corner radius increases resistance to mechanical and thermal shock. Such geometry is particularly effective when facing the toughness of ISO M materials that tend to form long, stringy chips and create high heat at the cutting zone. By favouring a negative rake and a sturdy corner, the insert tolerates interrupted cuts and moderate depths of cut without premature chipping, helping to maintain repeatable diameters and improved component finish during serial production. Practical integration and application guidance for workshop environments As an indexable turning insert, this specification is suitable for carbide toolholders capable of accepting WNMG‑style inserts and for operations where temperature management and reliable swarf control are priorities. The grade’s focus on high temperature strength means stable cutting parameters can be employed for continuous production runs, reducing tool change frequency and enhancing overall throughput. When pairing with appropriate coolant strategies and rigid clamping, the insert supports consistent dimensional tolerances and reliable edge life in both trial and serial machining contexts. For demanding rostfrei and superalloy applications, specify the Walter Tools Tiger‑tec Silver WSM01 insert via Metav Werkzeuge and request personalised cutting data or application advice from Metav Werkzeuge at info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data Article number: WNMG080408-FM5-WSM01-WALTER Designation: WNMG080408-FM5 WSM01 Type: Drehwendeschneidplatte Facts Series: Tiger‑tec Silver Grade: WSM01 Tolerance class: M Size designation: 08 Thickness designation: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Special features Chipbreaker: FM5 Shape: Trigon 80° Material suitability: S / M Suitable for: stainless steels (ISO M) Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The WNMG080408‑FM5 WSM01 from Walter Tools is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and reliable chip control in these materials. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker on this Walter Tools insert promotes controllable chip formation and safe swarf evacuation, which supports longer uninterrupted cycles and a consistent surface finish on tough materials. What benefits does the Trigon 80° shape deliver? The Trigon 80° geometry increases edge strength and access in shoulder and face turning; combined with the 0° negative rake, it improves resistance to chipping and supports stable cutting in interrupted or heavy applications. Is this insert compatible with standard WNMG toolholders? Yes, the WNMG080408‑FM5 WSM01 is designed to fit standard WNMG toolholders used for indexable turning inserts and can be integrated into existing tool assemblies that accept this format. How does the Tiger‑tec Silver coating contribute to tool life? The Tiger‑tec Silver coating provides improved heat resistance and reduced abrasive wear, which helps to extend tool life and maintain cutting edge integrity when machining high‑temperature alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are cited for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080408-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, a stable cutting edge, and precise chip control to keep production both efficient and consistent. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMG080408-FM5 WSM10S turning insert — Trigon 80°, Tiger·tec Silver (Walter Tools) A WNMG080408-FM5 WSM10S turning insert engineered for reliable machining of rostfreier Stahl and heat‑resistant alloys in demanding production environments Tiger·tec Silver coating for durability Trigon 80° shape for stable cuts FM5 chipbreaker for reliable chip control Designed for rostfreier Stahl and superalloys High thermal stability for demanding materials The Tiger·tec Silver coating and the coated carbide substrate provide significantly improved resistance to heat and wear compared with uncoated grades. This results in more consistent cutting-edge behaviour when machining materials that generate high temperatures and work harden quickly. The combination of coating technology and substrate is aimed at ensuring predictable tool life and reduced unplanned tool changes, which supports a steady production flow and lower process downtime. Geometry and chip control that stabilise machining The trigon 80° insert form with a 0° (negative) free cutting angle and a 0.8 mm corner radius achieves a balance between edge strength and cutting performance. The FM5 chipbreaker is matched to the geometry to promote controlled chip formation when facing or turning difficult alloys. The WNMG080408-FM5 WSM10S insert is therefore suited to operations where chip control and stable cutting forces directly improve surface finish consistency and cycle-time reliability. Application fit and workshop benefits Rated for ISO groups M and S, the grade WSM10S is intended for rostfreier Stahl and heat‑resistant superalloys or titanium, where secure chip formation and edge stability are critical. Using this insert supports process reliability for medium to heavy cuts on materials that are prone to work hardening or that transmit heat into the cutting edge. The result is a measurable contribution to productivity through fewer tool interventions and consistent part quality during series production. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Silver inserts or to confirm suitability for specific rostfreier Stahl and superalloy applications — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: WNMG080408-FM5-WSM10S-WALTER Type: Turning insert Designation: WNMG080408-FM5 WSM10S Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Plate form: Trigon 80° Free angle: 0° (negative) Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Coated carbide (Tiger·tec Silver) Chipbreaker: FM5 Suitable materials: rostfreier Stahl (ISO M), superalloys / titanium (ISO S) Designed for hard‑to‑machine materials and stable chip formation FAQ What materials is this insert best suited for? The WNMG080408-FM5 WSM10S insert is specified for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where heat resistance and edge stability are required. How does the Tiger·tec Silver coating affect performance? Tiger·tec Silver coating on this Walter Tools grade improves thermal resistance and wear behaviour, which stabilises cutting-edge life and helps maintain consistent machining performance on demanding materials. What role does the FM5 chipbreaker play? The FM5 chipbreaker is designed to produce controlled chips in combination with the trigon geometry, reducing entanglement and supporting reliable surface finishes during turning operations. Is the insert geometry suitable for heavy cuts? The trigon 80° form with a 0° negative rake and a 0.8 mm corner radius offers enhanced edge strength, making the insert suitable for medium to heavier duty turning where edge robustness is important. What identifier should be quoted when ordering or enquiring? Please quote WNMG080408-FM5 WSM10S (SKU: WNMG080408-FM5-WSM10S-WALTER) and mention Walter Tools to ensure the correct grade and geometry are supplied. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and protected designations are the property of their respective owners. The mention of brand names and trademarks is for explanation only and implies no association between our company and the brand owner. The offered item is an original, factory‑new product from the specified manufacturer (Walter Tools).
WNMG080408-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the FM5 chipbreaker to secure stable chip control and extended tool life in demanding turning applications; order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. WNMG080408-FM5 WSM20S – indexable turning insert, Tiger·tec Silver, FM5 (Walter Tools) WNMG080408-FM5 WSM20S is a Trigon 80° indexable turning insert engineered for robust performance when machining stainless steels and heat-resistant superalloys in demanding turning processes Tiger·tec Silver coating for extended life FM5 chipbreaker ensures secure chip control Optimised for stainless steels and superalloys Trigon 80° geometry for stable cutting High process reliability thanks to advanced coating The WNMG080408-FM5 WSM20S insert combines a modern Tiger·tec Silver coating with a coated carbide substrate to improve wear resistance and thermal stability when cutting tough materials. The WSM20S grade is designed specifically for applications where heat generation and build-up of material on the edge are critical factors; this supports consistent chip formation and reduces the risk of edge deterioration. For operations involving stainless steels and superalloys, the coating helps maintain a stable cutting edge, which results in fewer interruptions and more predictable tool life. Geometry and chip control for consistent quality A Trigon 80° plate form together with the FM5 chipbreaker delivers a balance of strength and chip control for medium to heavy turning passes. The insert’s 0° negative rake contributes to a robust cutting edge under high loads, while the 0.8 mm corner radius enhances edge support for improved surface finish and repeatability. These geometric features enable secure engagement with the workpiece and reduced vibration, which translates into consistent dimensional accuracy and better surface quality on challenging materials. Suitable applications and production benefits The design is particularly appropriate for machining tasks classified under ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium), offering a reliable option for workshop and production environments that process these materials frequently. With tolerance class M and execution G, the insert supports reproducible positioning and stable cutting forces, helping to lower the risk of premature insert failure. Adopting this grade and geometry can reduce downtime, improve process stability and contribute to a more economical production flow over time. Contact Metav Werkzeuge today for expert advice on Walter Tools Tiger·tec Silver inserts such as the WNMG080408-FM5 WSM20S and to discuss availability and suitable cutting parameters; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG080408-FM5-WSM20S-WALTER Designation: WNMG080408-FM5 WSM20S Manufacturer: Walter Tools Product type: Indexable turning insert Facts Corner radius: 0.8 mm Free cutting angle: 0° (negative) Insert size: 08 Thickness: 04 Trigon angle: 80° Special features Series / grade: Tiger·tec Silver Grade designation: WSM20S Chipbreaker: FM5 Suitable materials: stainless steels (M), superalloys / titanium (S) Tolerance class: M Execution: G FAQ What materials is this insert designed for? The WNMG080408-FM5 WSM20S indexable turning insert by Walter Tools is optimised for stainless steels (ISO group M) and heat-resistant superalloys or titanium (ISO group S). How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance and wear protection, promoting stable cutting edges and extended tool life during prolonged machining of difficult materials. Which features support chip control in interrupted cuts? The FM5 chipbreaker combined with the Trigon 80° geometry and a 0° negative rake offers robust chip control and edge strength, reducing the likelihood of built-up edge and improving surface consistency. Is this insert suitable for heavy machining or finishing passes? The combination of a 0.8 mm corner radius and the negative rake makes the insert well suited to heavier turning operations where edge stability is required; it can also deliver acceptable surface finishes with appropriate cutting parameters. How does tolerance class M affect interchangeability? Tolerance class M ensures consistent manufacturing tolerances for the insert, supporting repeatable seating and predictable cutting behaviour when replacing inserts in compatible tool holders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the respective manufacturer.
WNMG080408-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Combining the high-quality WEP10C cermet grade with the FP5 chipbreaker and a stable Trigon geometry delivers consistent surface finish and predictable edge life; ideal where repeatability and fine finishing matter. Order or request application guidance through Metav Werkzeuge for fast availability and technical advice. WNMG080408-FP5 WEP10C — Trigon 80° cermet turning insert by Walter Tools The WNMG080408-FP5 WEP10C is a Trigon 80° indexable insert engineered for fine finishing and stable chip control in machining operations. WEP10C cermet grade for top surface finish FP5 chipbreaker for stable chip control Trigon 80° form for versatile turning 0.8 mm corner radius for fine edge strength Precision finishing through a specialised cermet grade The WEP10C cermet formulation places emphasis on surface finish and edge stability rather than aggressive stock removal. As a consequence, this indexable insert performs reliably in operations that demand consistent part quality and minimal secondary finishing. The FP5 chipbreaker provides predictable chip formation, reducing the risk of stringing or entanglement in medium to light cuts. In practical terms, the pairing of a cermet grade with a controlled chipformer reduces rework and supports higher first-pass yield rates. Geometry designed for adaptable turning and edge security The Trigon 80° shape offers a balanced compromise between accessibility and strength: the acute geometry supports versatile tool approach angles while the 0.8 mm corner radius increases edge endurance in finishing passes. A 0° negative rake further stabilises the cutting edge under intermittent cutting conditions, and the tolerance class M ensures consistent seating and repeatable positioning in suitable toolholders. Those characteristics together make the insert suitable where tight tolerances and consistent form must be preserved across production batches. Application guidance and integration into the production process The insert belongs to the Walter Cermet series and carries the designation WNMG080408-FP5 WEP10C, which should be referenced when matching holders and programming cutting data. Material suitability is catalogue-dependent; the specific workpiece materials and cutting conditions must be verified against the product matrix to select optimal feeds and speeds. For millimetre-scale finishing operations, the combination of a cermet grade and the FP5 chipbreaker supports improved surface integrity and reduced burr formation, helping to shorten downstream processing and boosting throughput. Contact Metav Werkzeuge for application advice, availability and ordering of the Walter Cermet WNMG080408-FP5 WEP10C insert Technical Data Article number: WNMG080408-FP5-WEP10C-WALTER Designation: WNMG080408-FP5 WEP10C Label: Drehwendeschneidplatte WNMG080408-FP5 WEP10C Walter Tools Facts Corner radius: 0.8 mm Free angle: 0° (negative) Insert form: Trigon 80° Insert size: 08 Thickness: 04 Tolerance class: M Special features Series: Walter Cermet Grade: WEP10C (cermet) Chipbreaker: FP5 Execution: G Material specification: catalogue-dependent Manufacturer: Walter Tools FAQ What materials is the WNMG080408-FP5 WEP10C suited to machine? Material suitability for the WNMG080408-FP5 WEP10C must be checked in the product matrix; the cermet grade is intended for applications where fine finishing and surface quality are priorities rather than heavy roughing. How does the FP5 chipbreaker affect machining behaviour? The FP5 chipbreaker on the WNMG080408-FP5 promotes controlled chip formation and evacuation, which helps maintain consistent cutting forces and reduces the chance of chip-related surface defects during finishing passes. What advantages does the Trigon 80° form provide? The Trigon 80° geometry increases accessibility to complex contours while maintaining edge strength, making the insert suitable for a wide range of turning profiles where a balance of reach and robustness is required. How should the 0° negative rake be interpreted for cutting data? A 0° negative rake on the WNMG080408-FP5 WEP10C enhances edge stability under interrupted cuts and light finishing, so feeds and speeds should be adjusted accordingly to benefit from the improved edge security without overloading the insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-FP5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of a premium Tiger·tec Gold coating and a proven FP5 chipbreaker to increase process reliability and cycle consistency; the design supports robust chip control in steel and cast iron turning. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMG080408-FP5 WKP01G indexable turning insert — Trigon 80°, FP5 chipbreaker | Walter Tools A WNMG080408-FP5 WKP01G indexable turning insert designed for external turning of steel and cast iron, delivering stable cutting performance within the Tiger·tec Gold series Tiger·tec Gold coated grade WKP01G FP5 chipbreaker for stable chip control Trigon 80° geometry with 0.8 mm corner radius Optimised for steel and cast iron machining Consistent cutting performance and predictable productivity The combination of the Tiger·tec Gold coating and the WKP01G grade provides enhanced wear resistance and thermal stability, which results in a more predictable tool life. As an indexable insert with an FP5 chipbreaker, it ensures stable chip control during turning operations, reducing interruptions caused by poor chip evacuation. This leads to higher machine utilisation and fewer unplanned tool changes, a clear advantage for production-focused workshops seeking consistent output. Reliable application across steel and cast iron with secure edge form The trigon shape (80°) and 0.8 mm corner radius are engineered to deliver edge strength and repeatable geometry in external turning. Classified for ISO groups P and K, the insert is explicitly matched to steel and cast iron machining: the grade handles heat and typical chip forms from steels while the chipbreaker geometry copes with the often abrasive, short chips of cast iron. The combination reduces the risk of edge chipping and supports steady surface quality with minimal manual adjustment. Longer service life and simple tool management for serial production Featuring a negative rake of 0° (negative) and tolerance class M, the insert supports secure engagement and repeatable seating in compatible tool holders. The WNMG080408-FP5 WKP01G design reduces margin for setup variation and helps maintain cutting-edge integrity over multiple indexings. For engineering teams aiming to streamline stocking and tool replacement cycles, this insert’s robust construction contributes to predictable costs and lower process variability in continuous and batch production. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to discuss compatibility with existing tool holders or machining strategies. Technical Data Article number: WNMG080408-FP5-WKP01G-WALTER Designation: WNMG080408-FP5 WKP01G Series: Tiger·tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 08 Plate thickness: 04 Geometry: Trigon 80° Tolerance class: M Special features Chipbreaker: FP5 Coating technology: Tiger·tec Gold Application groups: P (steel), K (cast iron) Suitable for external turning with compatible WNMG tool holders FAQ What materials is this insert suited for? The WNMG080408-FP5 WKP01G insert is designed primarily for steel (ISO group P) and cast iron (ISO group K) applications, leveraging the Tiger·tec Gold grade for stable wear behaviour. What are the key geometric dimensions to check for holder compatibility? Key items to verify are the Trigon 80° form, plate size 08, thickness 04 and a corner radius of 0.8 mm to ensure the insert seats correctly in the intended tool holder. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker promotes controlled chip formation and evacuation, which reduces the likelihood of chip-related interruptions and helps maintain consistent surface finish during turning. Is the insert suitable for interrupted cuts or heavy roughing? With a negative rake of 0° (negative) and a robust corner radius, the WNMG080408-FP5 WKP01G offers good edge strength suitable for demanding turning conditions, though final suitability depends on cutting data and tool holder rigidity. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances thermal resistance and wear performance, supporting longer cutting life and dependable reproducibility across production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The item offered is original, brand-new merchandise from the manufacturer Walter Tools.
WNMG080408-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
High wear resistance from the Tiger‑tec Gold coating combined with a robust Trigon 80° geometry and FP5 chipbreaker delivers stable, productive turning in steel. Benefit from fewer tool changes and consistent surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. WNMG080408-FP5 WPP10G turning insert — Trigon 80°, Tiger‑tec Gold by Walter Tools The WNMG080408-FP5 WPP10G is a Trigon 80° indexable turning insert engineered for efficient steel machining, combining a coated carbide grade with an FP5 chipbreaker for reliable chip control. Tiger‑tec Gold coating for long tool life Trigon 80° form for robust turning 0.8 mm nose radius for reliable surface finish Negative 0° rake for stable cutting action Consistent productivity through advanced coating technology The combination of a Tiger‑tec Gold coating and the WPP10G carbide grade provides high wear resistance and improved thermal stability during turning operations. This engineered coating reduces flank and crater wear, extending tool life and lowering per‑part machining costs. For shops machining ISO‑P materials, the result is a measurable increase in uptime: longer tool life means fewer tool changes and less downtime, supporting continuous production and predictable process economics. The coated carbide is optimised for the heat and chip formation typical of steel machining, making it suitable for a broad range of unalloyed and alloyed steels. Geometry and chip control that improve surface quality The Trigon 80° form paired with the FP5 chipbreaker and a 0.8 mm nose radius is designed for stable cutting and effective chip formation. The FP5 geometry guides chips away from the cutting zone, reducing the risk of re-cutting and improving surface finish on the workpiece. A negative 0° rake adds robustness to the cutting edge, enabling interrupted cuts and heavier depths of cut where stability is required. For operators less familiar with insert geometry, the chipbreaker functions to produce short, controllable chips under typical turning parameters, which simplifies swarf handling and machine maintenance. Production benefits and application guidance for machining steel In production environments where repeatability matters, this insert delivers process reliability through a combination of material, coating and geometry. The grade is optimised for steel applications, offering a balanced mix of wear resistance and toughness for both continuous and mixed‑batch work. For application planning, consider the toolholder rigidity, cutting speed and feed to match the insert’s strengths; heavier feeds will exploit the robust edge, while moderate speeds leverage coating benefits. Metav Werkzeuge can provide tailored cutting data and selection advice to align the insert with machine capability and workpiece requirements. Discuss application requirements with Metav Werkzeuge to select the ideal Walter Tools WNMG080408-FP5 WPP10G insert with Tiger‑tec Gold coating — email info@metav-werkzeuge.com or call +49 2822 7131930 for specific cutting data and recommendations Technical Data Article number: WNMG080408-FP5-WPP10G-WALTER Name: Drehwendeschneidplatte WNMG080408-FP5 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Product type: Turning insert Core dimensions & numbers Corner radius: 0.8 mm Plate size: 08 Plate thickness: 04 Rake angle: 0° (negative) Geometry: Trigon 80° Design & application Grade: WPP10G (coated carbide) Chipbreaker: FP5 Execution: G Tolerance class: M ISO designation: WNMG080408-FP5 WPP10G Application group: Steel (ISO P) FAQ What materials is this insert suited for? The WNMG080408-FP5 WPP10G insert is designed primarily for steel (ISO P) applications and performs well on unalloyed and alloyed steels thanks to the Tiger‑tec Gold coating and the WPP10G grade. How does the FP5 chipbreaker affect chip control and finish? The FP5 chipbreaker produces short, controlled chips under typical turning parameters, reducing re‑cutting and helping to achieve a consistent surface finish while simplifying swarf management. Why choose a Trigon 80° form for turning? The Trigon 80° geometry offers a strong cutting edge and versatility for general turning, providing robustness for interrupted cuts and good edge support for higher feed rates. Is the insert suitable for heavy interrupted cuts? Yes, the combination of a negative 0° rake and robust geometry makes this insert suitable for interrupted cuts and applications where edge stability is critical. Can this insert be used on automated production lines? The wear resistance and thermal stability of the Tiger‑tec Gold coating make this insert a reliable choice for automated production, where longer tool life reduces changeover frequency. What does the tolerance class M indicate? Tolerance class M specifies the dimensional precision of the insert, ensuring consistent fit in the corresponding toolholder and repeatable performance across production runs. Are cutting data recommendations available for specific steel grades? Cutting data tailored to specific steel grades can be provided; Metav Werkzeuge offers guidance on speeds, feeds and depth of cut to match machine capability and workpiece requirements. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080408-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP20G grade for stable chip formation, broad steel coverage and long tool life; order directly via Metav Werkzeuge or consult the team for application-specific advice. WNMG080408-FP5 WPP20G Trigon 80° turning insert for steel, Tiger·tec Gold — Walter Tools A WNMG080408-FP5 WPP20G turning insert designed for versatile steel machining, offering a trigon 80° geometry and the Tiger·tec Gold coating for high process reliability Tiger·tec Gold coating for long tool life Trigon 80° geometry for secure clamping Optimised FP5 chipbreaker for consistent chips Higher productivity with advanced coating technology The combination of the Tiger·tec Gold technology and the WPP20G grade yields a coated carbide insert that focuses on extending tool life and reducing replacement intervals. The multilayer coating improves heat resistance and wear behaviour during continuous turning of steels, which lowers the cost per part in series production. For planners and process engineers this translates into fewer machine stops and a more predictable tool-change cadence, supporting a measurable increase in overall machining throughput. Consistent chip control and improved surface quality The FP5 chipbreaker is engineered for reliable chip formation in a wide range of cutting conditions, producing short, manageable chips that reduce interruption risks and improve workplace safety. Combined with the trigon 80° form, the geometry stabilises cutting forces and contributes to superior surface quality on turned components. In practical terms, this means fewer downstream operations and less rework, especially in finishing and semi-finishing passes on steel components. Optimised for steel machining and secure clamping Developed for materials in ISO group P, the insert is optimised specifically for steel machining. The negative 0° clearance (negative rake) offers increased cutting-edge strength and resistance to edge chipping under interrupted cuts or roughing tasks. The 0.8 mm corner radius supports a balance between component strength and fine surface finish, making the insert suitable for a variety of turning operations where repeatable dimensional accuracy and tool robustness matter. Process reliability, repeatability and tolerance management With a tolerance class M, the geometry and dimensions ensure consistent seating and repeatable performance across indexable cycles. This repeatability reduces setup variation and supports consistent cycle times in batch manufacturing. The combination of stable substrate properties and coating technology delivers predictable wear behaviour, aiding lifecycle planning and spare-part provisioning for production managers focused on lean and resilient machining processes. Practical integration and application recommendations The insert integrates efficiently into standard holders that accept the WNMG form factor and benefits from controlled clamping forces due to its trigon shape. For best results, match cutting data to the grade’s intended use in steel turning and validate feed and speed in short trials before full production runs. If cutting parameters, toolholder compatibility or process optimisation advice is required, Metav Werkzeuge provides consultancy to align cutting strategy with production targets. For high-process stability, choose Walter Tools Tiger·tec Gold inserts in WPP20G quality — contact Metav Werkzeuge for tailored machining recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080408-FP5-WPP20G-WALTER Designation: WNMG080408-FP5 WPP20G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP5 Core specifications Corner radius: 0.8 mm Thickness: 04 Size designation: 08 Clearance angle: 0° (negative) Tolerance class: M Features and applications Coating: Tiger·tec Gold Substrate: Coated carbide Material application: Steel (ISO group P) Chip control: FP5 for stable chip formation Shape: Trigon 80° Typical use: Versatile steel turning, finishing and semi-finishing FAQ What materials is this insert suitable for? The Walter Tools WNMG080408-FP5 WPP20G insert is intended for machining materials in ISO group P, primarily various steels. What is the advantage of the Tiger·tec Gold coating? The Tiger·tec Gold coating on the WPP20G grade improves heat resistance and wear behaviour, which enhances tool life and process stability during steel turning. How does the FP5 chipbreaker affect production? The FP5 chipbreaker produces short, controllable chips that reduce interruption and improve workplace safety, aiding uninterrupted production runs. Is the insert suitable for interrupted cuts? Yes; the negative 0° clearance and robust cutting edge make the insert resistant to edge chipping, which is beneficial in interrupted cutting scenarios on steel. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, making it suitable for finishing and semi-finishing operations with reliable dimensional results. Walter Tools: The Walter AG (brand Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer: Walter Tools; part of the Sandvik Group; AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
WNMG080408-FW5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust Trigon 80° geometry and reliable FW5 chip control for consistent metal-cutting results; order this insert directly via Metav Werkzeuge or contact our consultants for application advice. WNMG080408-FW5 WKP01G Tiger·tec Gold turning insert — for steel and cast iron, Walter Tools WNMG080408-FW5 WKP01G is an indexable turning insert designed for high-productivity roughing and finishing in steel and cast iron applications. Tiger·tec Gold coated carbide for wear resistance Optimised FW5 chipbreaker for stable chip formation Trigon 80° geometry for strong corner support 0.8 mm corner radius for reliable edge life Reliable performance across steel and cast iron The Tiger·tec Gold grade WKP01G delivers a balanced combination of toughness and wear resistance suited to machining both steel (P) and cast iron (K). Its coated carbide construction reduces abrasive wear while preserving edge integrity, which translates into fewer tool changes and improved process stability. The insert geometry is optimised for the heat and chip flow typical of ferrous metals, enabling consistent cycle times and predictable tool life. Precise chip control and surface quality An FW5 chipbreaker ensures controlled chip formation even under variable cutting conditions; this reduces the risk of chip entanglement and supports uninterrupted automated turning. The Trigon 80° shape provides a robust cutting edge with an extended contact length, which helps maintain surface finish quality during interrupted cuts and roughing passes. For shops seeking repeatable results, these features contribute directly to fewer reworks and steadier throughput. Durability that reduces operating costs The combination of the Tiger·tec Gold coating and the insert’s cutting-edge preparation increases resistance to both adhesive and abrasive wear, extending productive life. The 0° negative relief produces a stable cutting angle that resists edge chipping under heavy loads, while the 0.8 mm corner radius balances strength and finish capability. This leads to lower tooling consumption per part and a better cost-benefit ratio over production runs. Practical handling and application guidance The insert’s designation and dimensions follow standard indexable tooling formats, making it suitable for common turning holders that accept WNMG geometry. For process setup, select cutting data appropriate for coated carbide grades when machining unalloyed and alloyed steels or grey and nodular cast irons; moderate feed and appropriate coolant strategy enhance performance. If specialised advice is required for specific machines or components, technical consultation is available to recommend cutting parameters and holder choices. For reliable, high-productivity turning with Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: WNMG080408-FW5-WKP01G-WALTER Designation: WNMG080408-FW5 Standard designation: WNMG080408-FW5 WKP01G Series: Tiger·tec Gold Grade: WKP01G Manufacturer: Walter Tools Core specifications Insert size: 08 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Geometry: Trigon 80° Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Applicable materials: Steel (P), Cast iron (K) Chipbreaker: FW5 Negative rake: 0° Shape: Trigon 80° Grade suitability: WKP01G FAQ What materials is this insert best suited for? The WNMG080408-FW5 WKP01G insert by Walter Tools is optimised for steel (P) and cast iron (K), with the Tiger·tec Gold coating tailored to the heat and wear characteristics of these groups. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker on this turning insert promotes stable, short chip formation, which improves process reliability and reduces the risk of chip-related interruptions during turning operations. What advantage does the Trigon 80° shape provide? Trigon 80° geometry gives a stronger cutting edge and increased corner support, making the insert suitable for heavy cuts and interrupted cutting situations while maintaining acceptable surface quality. Is the corner radius suitable for finishing? With a 0.8 mm corner radius, the insert balances edge strength and surface finish capability; it is well suited for medium-duty finishing and robust roughing operations. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and part of the Sandvik Group.
WNMG080408-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Achieve reliable productivity through the combination of Tiger‑tec Gold coating for extended tool life, the WPP10G grade optimised for steel and the FW5 chipbreaker for stable chip control; order the WNMG080408-FW5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed WNMG080408-FW5 WPP10G indexable turning insert — Tiger‑tec Gold for steel — Walter Tools WNMG080408-FW5 WPP10G is a negative‑rake trigon indexable insert designed for robust steel turning applications, offering a wear‑resistant coated grade and a chipbreaker tuned for consistent chip formation Tiger‑tec Gold coating for long tool life WPP10G grade optimised for steel FW5 chipbreaker for stable chip control Trigon 80° form with 0.8 mm corner radius Consistent performance for productive turning operations The coated WPP10G grade delivers a balance of wear resistance and toughness that supports stable production in a wide range of steel turning tasks. The Tiger‑tec Gold technology reduces flank and crater wear under typical machining temperatures, which translates into longer tool life and fewer index changes. For process planners, this means improved uptime and predictable tool cycles. The combination of coated carbide and the specified tolerance class M results in reproducible cutting geometry and consistent part quality across batches. Geometry and chip control that protect the machine and the workpiece The Trigon 80° form with a 0° (negative) rake angle increases edge robustness for interrupted cuts and heavier machining, while the 0.8 mm corner radius extends edge life without sacrificing dimensional control. The FW5 chipbreaker is designed for secure chip formation when machining steel, reducing the risk of snarled chips and minimising secondary operations for chip clearance. These geometric choices help maintain stable cutting forces, lowering the likelihood of tool deflection and supporting repeatable surface finishes. Application focus and economical advantages in production Designed for ISO P workpieces, this indexable insert is tailored to unalloyed and alloyed steels and is suitable for a variety of roughing and finishing strategies where reliable performance is required. The insert’s attributes promote fewer tool changes and consistent cycle times, delivering a favourable cost per component in medium‑ to high‑volume production. As a Walter Tools product, the insert benefits from a manufacturer focus on precision and durable cutting edges, making it a practical choice for workshops seeking a robust, general‑purpose turning solution Contact Metav Werkzeuge for tailored advice on implementing the WNMG080408-FW5 WPP10G insert in production or to request specification support — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: WNMG080408-FW5-WPP10G-WALTER Article designation: WNMG080408-FW5 WPP10G Product type: indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Facts Size code: 08 Plate thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Plate form: Trigon 80° Special features Grade: WPP10G Chipbreaker: FW5 Tolerance class: M Suitable for: Steel (ISO P) Coating: Tiger‑tec Gold FAQ What materials is this insert suitable for? The WNMG080408-FW5 WPP10G is engineered primarily for steel (ISO P) and performs reliably across unalloyed and alloyed steels thanks to the WPP10G grade and Tiger‑tec Gold coating. What does the FW5 chipbreaker provide? The FW5 chipbreaker enables controlled chip formation and evacuation during steel turning, supporting stable cutting conditions and reducing the risk of chip accumulation. How does the Trigon 80° form affect cutting? The Trigon 80° geometry increases approach angle flexibility and, combined with the negative rake, enhances edge strength for interrupted cuts and heavy turning operations. Why choose the Tiger‑tec Gold grade? Tiger‑tec Gold provides a coated carbide solution that balances wear resistance and toughness, extending tool life and improving process security in continuous and serial production. Is this insert suitable for finishing as well as roughing? Yes — the combination of a 0.8 mm corner radius and the WPP10G grade allows use in both robust roughing and controlled finishing passes, depending on cutting parameters and machine rigidity. The Walter AG (trading as Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer.
WNMG080408-FW5 WPP20G G Wendeplatten - Walter Tools
Combine the Tiger‑tec Gold coating with a robust FW5 chipbreaker and the Trigon 80° geometry to achieve stable, economical turning of steel; order the insert via Metav Werkzeuge or consult our advisors for application-specific recommendations WNMG080408‑FW5 WPP20G — Trigon 80° indexable turning insert, Tiger‑tec Gold (Walter Tools) The WNMG080408‑FW5 WPP20G is a trigon 80° indexable turning insert designed for efficient machining of steel, featuring a negative 0° clearance and an FW5 chipbreaker for controlled chip formation. Tiger‑tec Gold coated carbide Trigon 80° geometry for robust turning 0.8 mm corner radius for consistent edge life Extended tool life through advanced coating technology The combination of the Tiger‑tec Gold coating and the WPP20G grade yields a wear-resistant cutting edge optimised for steel machining. The multilayer coating reduces abrasion and thermal loading during continuous cuts, which translates into fewer insert changes and improved process economy. For manufacturers focused on repeatable component quality, the coated carbide substrate ensures consistent flank wear behaviour and longer productive tool life while maintaining surface integrity on workpieces. Stable cutting and reliable chip control for demanding operations The FW5 chipbreaker and the Trigon 80° geometry are engineered to deliver controlled chip formation and secure cutting edge support. The insert’s negative 0° clearance increases cutting edge strength under interrupted or heavy cuts, while the 0.8 mm corner radius balances edge robustness with achievable surface finish. Together these design elements reduce vibration and support stable metal removal rates, enabling predictable cycle times and fewer scrap parts in series production. Optimised for steel — application guidance and scope Designed for the ISO P material group, this indexable insert is suitable for unalloyed and alloyed steel where typical chip formation and heat generation occur. The combination of coated carbide and the FW5 chipbreaker is appropriate for general turning tasks, including finishing and medium‑cut roughing, where tool life and surface quality are priorities. Machine setup should match the toolholder to the Trigon 80° form to exploit edge strength; this insert integrates with standard WNMG-compatible carriers and clamping systems. Productivity gains and process reliability in the toolroom Adopting this insert supports higher uptime and consistent production output thanks to its robust grade and geometrical design. The engineered microgeometry and coating yield reliable cutting performance and contribute to lower overall tooling costs per component when compared with uncoated grades. Backed by the Walter reputation for precision tools, the insert aids in maintaining productivity targets, repeatable tolerances and reduced rework in batch and continuous manufacturing environments. For application-specific recommendations on Walter Tools' WNMG080408‑FW5 WPP20G or to request material‑specific feed and speed suggestions, contact Metav Werkzeuge for expert advice and availability Technical data Article number: WNMG080408-FW5-WPP20G-WALTER Name: Drehwendeschneidplatte WNMG080408-FW5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Core specifications Plate size: 08 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Shape: Trigon 80° Features & materials Grade: WPP20G Coating/series: Tiger‑tec Gold Chipbreaker: FW5 Substrate: coated carbide Material application: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The WNMG080408‑FW5 WPP20G is specified for the ISO P material group and is suitable for turning unalloyed and alloyed steel. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP20G grade improves abrasion resistance and thermal stability, resulting in extended tool life when machining steel. How does the FW5 chipbreaker influence performance? The FW5 chipbreaker promotes controlled chip formation and evacuation, improving process stability and reducing the risk of built-up edge in general turning operations. What does the negative 0° relief mean for machining? A negative 0° relief strengthens the cutting edge and is advantageous for interrupted cuts or heavier material removal where edge support is critical. Which toolholders are compatible with this insert form? The Trigon 80° geometry fits standard WNMG-compatible indexable insert holders designed for trigon inserts, enabling straightforward integration into existing tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Walter Tools is referenced as the manufacturer of the described insert.
WNMG080408-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and a robust trigon geometry for secure chip formation and extended tool life; the insert delivers reliable performance on stainless steels and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or request application support from the consultants for optimised machining results. WNMG080408-FW5 WSM20S turning indexable insert by Walter Tools — Tiger·tec Silver, Trigon 80° WNMG080408-FW5 WSM20S is a trigon insert designed for demanding turning applications, optimised for machining stainless steels and heat‑resistant superalloys where edge stability and temperature resistance are essential Tiger·tec Silver coating for heat resistance Trigon 80° geometry for strong edge strength FW5 chipbreaker for controlled chips 0° negative clearance for stable cutting High thermal stability for tough materials The coated carbide grade from the Tiger·tec Silver family combines a temperature‑resistant surface layer with a mechanically robust substrate to maintain the cutting edge under heavy thermal load. This formulation supports a stable cutting process when tackling stainless steels and superalloys, materials that tend to generate heat and strain the tool. The result is predictable wear behaviour and fewer unplanned tool changes, which supports higher machine uptime and a consistent surface finish on workpieces. Geometry engineered for secure cutting and chip control The Trigon 80° form and FW5 chipbreaker are tuned to provide a short, segmented chip for turning operations that require controlled evacuation. The trigon shape increases insert strength at the cutting edge, reducing the risk of chipping during interrupted cuts or tough feed conditions. With the 0° negative clearance, the insert offers a compact shear zone that helps stabilise the cut and preserves the edge during demanding passes, improving process reliability in continuous production. Application benefits and productivity gains Thanks to the WSM20S grade, the insert is particularly suitable where heat resistance and edge integrity determine cycle times and cost‑efficiency. Using this insert can extend tool life in difficult materials, reduce scrap caused by edge failure and allow more aggressive cutting parameters compared with standard uncoated grades. The combination of coating technology and geometrical design supports improved metal removal rates and reduced process variance for serial production. Practical use and process advice For best results, pair the insert with a rigid toolholder and steady clamping to exploit the edge stability of the trigon geometry. The FW5 chipbreaker performs well in medium to heavy feeds; lighter feeds benefit from adjusted feed rates to avoid built‑up edge on some stainless grades. Where groove or interrupted cuts occur, the robust corner radius and negative clearance reduce the chance of edge breakage and support repeatable component tolerance. For machining tasks demanding heat resistance and stable edge life, contact Metav Werkzeuge for tailored recommendations and to procure Walter Tools Tiger·tec Silver inserts; Metav Werkzeuge can provide application advice and delivery arrangements. Technical Data SKU: WNMG080408-FW5-WSM20S-WALTER Article designation: WNMG080408-FW5 Grade / Sort: WSM20S Series: Tiger·tec Silver Product type: Turning indexable insert Numbers / Facts Corner radius: 0.8 mm Clearance: 0° (negative) Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Tolerance class: M Execution: G Special features / Versions Coating: Tiger·tec Silver Chipbreaker: FW5 Material suitability: S / M (superalloys/titanium and stainless steels) Brand: Walter Tools Application: Heavy‑duty turning, interrupted cuts, stainless and heat‑resistant alloys FAQ What materials are best suited to this insert? The WNMG080408-FW5 WSM20S insert is intended primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and secure chip formation in these alloys. How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating increases heat resistance and protects the cutting edge, which leads to longer tool life and more consistent results when machining high‑temperature‑sensitive materials. Is the trigon geometry beneficial for interrupted cuts? Yes, the Trigon 80° geometry provides enhanced edge strength and the robust corner radius reduces the likelihood of chipping during interrupted or unstable cuts. Which chipbreaker suits general turning tasks? The FW5 chipbreaker delivers controlled, short chips suitable for medium to heavy feeds and supports reliable chip evacuation in many turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision cutting tools and is part of the Sandvik Group. Protected trademarks and product names mentioned are the property of their respective owners and are used for explanation only. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory‑new product of the manufacturer.
WNMG080408-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, the MK5 chipbreaker and a 0.8 mm corner radius delivers consistent chip control and long tool life in cast iron turning; this ensures reliable production and fewer tool changes. Order the WNMG080408-MK5 WKK10S directly via Metav Werkzeuge or consult our specialists for process optimisation. WNMG080408-MK5 WKK10S — indexable turning insert, Trigon 80°, for cast iron (Walter Tools) A WNMG080408-MK5 WKK10S indexable insert engineered for productive cast iron turning, combining a robust trigon geometry with a coated carbide grade for stable wear behaviour. Tiger·tec Silver coating for wear resistance Optimised MK5 chipbreaker for reliable chip control Trigon 80° geometry for secure seat and rigidity 0.8 mm corner radius for mixed roughing and finishing Proven coating and grade for high process reliability The insert uses the Tiger·tec Silver coating technology applied to a coated carbide substrate, designed specifically for abrasive cast iron operations. This combination improves resistance to abrasive wear and helps maintain a stable cutting edge over extended cycles. The supplied grade, WKK10S, is tuned for the demands of cast iron (ISO group K), offering a balance between wear resistance and toughness that reduces unexpected tool failure. As a result, production runs can be longer and more predictable, supporting higher overall equipment effectiveness. Geometry and chip control that support consistent surface quality The Trigon 80° shape together with the MK5 chipbreaker delivers robust clamping engagement and controlled chip formation when turning cast iron. The 0.8 mm corner radius contributes to a firm cutting edge capable of withstanding interrupted cuts while still allowing good surface finish in mixed operations. The insert’s 0° rake (negative) setting improves edge strength for heavy cuts, while the plate thickness and form provide dimensional stability — all of which minimise chatter and help achieve repeatable part tolerances during serial production. Applications, handling and process advice for the shop floor This insert is suited primarily for turning cast iron materials in production environments where process security and predictable tool life are key. The chipbreaker geometry helps break the typically short, brittle chips of cast materials and supports automatic chip evacuation. For set-up, ensure correct seat and clamping in the toolholder specified for trigon inserts, verify rake orientation (negative 0°), and adopt cutting parameters aligned with the workpiece grade. For additional machining data or to match the insert to specific toolholders, Metav Werkzeuge’s technical team can supply tailored recommendations. For reliable cast iron turning with Walter Tools quality, request technical advice or order the WNMG080408-MK5 WKK10S from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data Article number: WNMG080408-MK5-WKK10S-WALTER Designation: WNMG080408-MK5 WKK10S Manufacturer: Walter Tools Core data Plate size: 08 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Plate form: Trigon 80° Tolerance class: M Features / Applications Coating / series: Tiger·tec Silver Grade / sort: WKK10S Chipbreaker: MK5 Material application: cast iron (K) Execution: G FAQ Which materials is this insert suitable for? The WNMG080408-MK5 WKK10S insert is specified for cast iron machining (ISO group K) and its grade and coating are optimised for the abrasive, short-chip behaviour typical of these materials. What are the key geometry details to consider? The insert has a Trigon 80° form, a 0.8 mm corner radius and a 0° negative rake angle; these features support secure clamping, edge strength and consistent chip formation in turning operations. How does the MK5 chipbreaker affect chip control? The MK5 chipbreaker is designed to produce controlled short chips when machining cast iron, aiding automatic evacuation and reducing the risk of entanglement at the cutting zone. Is this insert coated and what benefit does the coating provide? Yes — the insert uses Tiger·tec Silver coating on a coated carbide base, which improves abrasive wear resistance and contributes to longer, more reproducible tool life under cast iron conditions. Can this insert be used for finishing operations? The 0.8 mm corner radius supports mixed roughing and medium-finishing; for very fine finishing, smaller radii are typically preferred. The insert provides a good compromise between edge robustness and surface quality. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WNMG080408-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from the combination of abrasion-resistant grade and proven coating for longer tool life; the trigon 80° geometry with a 0.8 mm corner radius provides secure seating and reliable chip control. Order this insert via Metav Werkzeuge or consult our specialists for tailored recommendations. WNMG080408-MK5 WKK20S turning indexable insert — Tiger‑tec Silver, for cast iron (Walter Tools) The WNMG080408-MK5 WKK20S is a trigon 80° turning indexable insert designed for productive machining of cast iron components with a Tiger‑tec Silver coating and MK5 chipbreaker. Tiger·tec Silver coating for extended tool life WKK20S grade optimised for cast iron machining Trigon 80° form for positive seating and strength 0.8 mm corner radius with MK5 chipbreaker Consistent chip control and abrasion resistance for cast iron The combination of the Tiger‑tec Silver coating with the WKK20S grade is aimed specifically at the demands of cast iron machining: high abrasive wear and frequent, short, breaking chips. The integrated MK5 chipbreaker supports controlled chip formation, which reduces the risk of entanglement and minimises downtime for chip management. This results in more predictable tool life and fewer interruptions during roughing and semi‑finishing operations, delivering measurable gains in machining throughput without sacrificing surface integrity. Robust geometry that ensures secure clamping and repeatable results A trigon 80° form provides a compact seating area that combines strength with reliable indexability. The negative relief at 0° rake increases cutting edge security under heavy interrupted cuts, while the 0.8 mm corner radius balances edge strength with the ability to produce stable surface finishes. Together, these geometric choices reduce vibration sensitivity and support consistent part tolerances across multiple tool changes, enhancing reproducibility on serial production runs. Productivity and process stability for demanding production environments The coated, wear‑resistant grade and the insert geometry together increase overall productivity by enabling higher metal removal rates while maintaining acceptable flank and crater wear. The design supports process stability — fewer edge failures and longer intervals between index changes mean less machine idle time and lower tooling handling. For production shops handling cast iron components, this insert helps sustain cycle times and contributes directly to predictable output and lower unit manufacturing costs. Application guidance and suitability This insert is optimised for ISO group K materials, specifically a range of cast iron grades that produce short, abrasive chips. Typical uses include roughing and semi‑finishing of cast housings, brake components, and pump bodies where controlled chip flow and edge protection are priorities. For customers uncertain about the best insert choice for a particular casting grade or machining strategy, technical consultation is available to align cutting data with the workpiece material and machining centre capabilities. Contact Metav Werkzeuge for tailored selection of Walter Tools Tiger‑tec Silver inserts and advice on cutting data; reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: WNMG080408-MK5-WKK20S-WALTER Name: Turning indexable insert WNMG080408-MK5 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Size: 08 Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WKK20S (coated cemented carbide) Chipbreaker: MK5 Shape: Trigon 80° Material suitability: cast iron (ISO K) Execution: G FAQ What materials is this insert intended for? The WNMG080408-MK5 WKK20S insert is intended primarily for cast iron (ISO group K) applications and is optimised for the abrasive, short‑chip behaviour typical of these materials. What does the MK5 chipbreaker provide? The MK5 chipbreaker promotes controlled, short chips during cutting; combined with the Tiger‑tec Silver coating on the WKK20S grade, it helps maintain consistent chip flow and reduces the likelihood of chip jams. How does the trigon 80° form affect performance? The trigon 80° geometry offers a compact, strong seating face that improves clamping stability and repeatability under heavy or interrupted cuts, contributing to reliable tool life and consistent part quality. Is the insert coated and how does that help? Yes, the insert uses Tiger‑tec Silver coating technology; on the WKK20S grade this coating increases resistance to abrasive wear and supports longer intervals between index changes in cast iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools (Walter AG) is a leading manufacturer of precision cutting tools and is known for its comprehensive range of solutions for productive metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG080408-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust Trigon 80° geometry and proven MM5 chip control for secure turning of stainless steel; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. WNMG080408-MM5 WMP20G indexable turning insert — Tiger·tec Gold coating for stainless steel | Walter Tools WNMG080408-MM5 WMP20G is an indexable turning insert designed to deliver stable cutting performance in stainless steel applications thanks to a Tiger·tec Gold coating and an MM5 chipbreaker Tiger·tec Gold coating for enhanced wear resistance Trigon 80° shape for stable heavy cuts 0.8 mm corner radius for consistent edge strength Optimised for machining stainless steel (ISO M) High-performance coating for consistent machining results The insert is equipped with the Tiger·tec Gold technology, a multilayer coating system developed to maintain a stable cutting edge under the elevated temperatures and adhesion tendencies typical of stainless steel. This coating reduces flank wear and supports repeatable process windows, which translates into fewer tool changes and higher overall productivity. Combined with the MM5 chipbreaker, the insert promotes secure chip formation and evacuation, lowering the risk of built-up edge and improving surface finish on demanding materials. Geometry engineered for rigidity and cutting reliability A Trigon 80° plate form provides a large cutting edge and improved insert support, making the design particularly suitable for medium to robust turning operations where stability is essential. The 0.8 mm corner radius increases edge strength and resists edge chipping during interrupted cuts, while the 0° (negative) rake angle contributes to a robust cutting geometry that tolerates higher cutting forces. These geometric choices result in reliable performance and predictable tool life when integrated into standard turning holders. Practical benefits: process security and shop-floor efficiency Using an indexable solution such as this trigon insert reduces setup time and tool inventory complexity. The standardised WNMG designation facilitates quick replacement and straightforward toolholder selection. For assemblies that require predictable output and easy indexability, this insert supports efficient cycle times and reduced downtime. For further technical specifications or cutting data, Metav Werkzeuge provides tailored recommendations and can supply machining parameters suited to the specific stainless steel grade and turning conditions. For application advice, availability and order processing of the Walter Tools WNMG080408-MM5 WMP20G insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate support and expert consultation Technical data Article number: WNMG080408-MM5-WMP20G-WALTER Designation: WNMG080408-MM5 WMP20G Type: Drehwendeschneidplatte Brand: Walter Tools Core technical data Plate size: 08 Thickness code: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Special features Series: Tiger-tec Gold Grade/sort: WMP20G Chipbreaker: MM5 Material group: M Suitable for: stainless steel FAQ What materials is this insert designed for? The WNMG080408-MM5 WMP20G insert is optimised for stainless steel (ISO group M) and supports secure chip formation and stable cutting edges in those applications. How does the MM5 chipbreaker affect machining of stainless steels? The MM5 chipbreaker on the WNMG080408-MM5 promotes controlled chip segmentation and evacuation, reducing the tendency for built-up edge and improving surface quality when turning stainless steel. Is the Trigon 80° shape suitable for heavy cuts? Yes, the Trigon 80° geometry provides a large engagement face and good support in the toolholder, which enhances rigidity and makes the insert appropriate for medium to robust cutting operations. What benefit does the Tiger·tec Gold coating deliver? The Tiger·tec Gold coating extends tool life by reducing flank wear and improving heat resistance, helping to maintain consistent cutting performance on challenging stainless steel grades. Can this insert be indexable in standard WNMG toolholders? The WNMG080408-MM5 WMP20G follows the standard WNMG designation and is compatible with corresponding toolholders designed for WNMG inserts, enabling quick indexing and replacement Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names mentioned in this description are the property of their respective owners. The mention of brand names such as Walter Tools is for explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and those manufacturers. The offered item is an original, factory-new product of the named manufacturer.
WNMG080408-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the MM5 chipbreaker for consistent chip control and longer tool life; the Trigon 80° geometry and 0° (negative) free angle deliver robust performance in rostfreier Stahl machining. Order or request tailored cutting data and matching grades via Metav Werkzeuge for seamless integration into production. WNMG080408-MM5 WMP20S Trigon 80° indexable turning insert for rostfreier Stahl — Walter Tools The WNMG080408-MM5 WMP20S is a trigon 80° indexable turning insert engineered for medium to robust turning of rostfreier Stahl components in demanding production environments. Tiger·tec Silver coating technology MM5 chipbreaker for stable chip control Trigon 80° geometry for robust cutting 0° (negative) free angle for heavy cuts Proven process security through coating and chip control The combination of the Tiger·tec Silver coating and the WMP20S grade provides a durable, heat-resistant surface that stabilises the cutting edge under elevated temperatures typical for rostfreier Stahl machining. The coated carbide technology reduces adhesion and protects the substrate, which results in fewer interruptions for edge maintenance and a more predictable lifetime. The MM5 chipbreaker is designed to produce consistent, controllable chips, lowering the risk of built-up edge and improving surface finish in continuous and interrupted cuts. Geometry and edge form that support robust turning A Trigon 80° shape with an 0° (negative) free angle makes the insert ideal for heavier cuts and interrupted cutting conditions where rigidity and cutting stability are priorities. The relatively large 0.8 mm corner radius distributes cutting forces across a broader edge, increasing resistance to edge chipping and contributing to longer tool life under medium to robust cutting regimes. These geometric choices favour manufacturers seeking reliable, repeatable results when processing rostfreier Stahl. Practical integration into production workflows The insert’s standard designation and compatibility simplify tooling inventory and setup: the ISO-style designation aligns with common toolholders and the compact plate size facilitates fast indexing and replacement. Because the grade is aimed at rostfreier Stahl applications, process engineers can expect improved repeatability and fewer rejects when the cutting data is adapted to the material’s heat generation and tendency to work-harden. For customers less familiar with chipbreaker selection or feed/speed optimisation, the technical guidance available from Metav Werkzeuge helps to translate geometry and coating advantages into measurable productivity gains. For application-specific cutting data, tailored recommendations and fast supply of Walter Tools turning inserts such as the WNMG080408-MM5 WMP20S, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert advice and delivery options. Technical data Article number: WNMG080408-MM5-WMP20S-WALTER Product name: Drehwendeschneidplatte WNMG080408-MM5 WMP20S Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Plate size: 08 Plate thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features Grade: WMP20S Chipbreaker: MM5 Plate form: Trigon 80° Material group: M Application: rostfreier Stahl FAQ What materials is this insert suitable for? The WNMG080408-MM5 WMP20S is designed primarily for rostfreier Stahl; the grade and coating support chip control and edge stability under the higher heat and work-hardening tendencies of these materials. What does the Tiger·tec Silver coating provide? Tiger·tec Silver is a multi-layer coating technology that enhances thermal resistance and reduces adhesion, allowing the Walter Tools grade WMP20S to maintain a stable cutting edge for longer and improve process repeatability. How does the MM5 chipbreaker influence performance? The MM5 chipbreaker promotes consistent chip formation and evacuation, which reduces the likelihood of built-up edge and supports a better surface finish when turning rostfreier Stahl with the WNMG080408-MM5 insert. When is a 0° (negative) free angle advantageous? A 0° (negative) free angle is beneficial for heavier cuts and interrupted machining where a stronger cutting edge and increased radial support are required to avoid chipping and ensure stable cutting forces. Is the Trigon 80° shape universal for all turning operations? The Trigon 80° form is particularly effective for medium to robust turning tasks and offers flexibility in a variety of external and face-turning operations; decisions on holder selection and feeds should be made based on the specific application. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-MM5 WMP30G WMP30G Wendeplatten - Walter Tools
Combine robust geometry with Tiger‑tec Gold wear resistance and reliable chip control to maintain continuous production when machining stainless steels. Order directly via Metav Werkzeuge or request consultancy for application-specific recommendations. WNMG080408-MM5 WMP30G – Trigon 80° indexable turning insert, Tiger‑tec Gold (Walter Tools) The WNMG080408-MM5 WMP30G is an indexable turning insert engineered for machining stainless steels under medium to robust cutting conditions, optimised for stable chip formation and consistent edge life. Tiger‑tec Gold coated carbide grade WMP30G For machining stainless steels (ISO group M) Trigon 80° geometry for robust turning 0.8 mm corner radius, negative 0° rake High performance for stainless steel turning with consistent chip control The Tiger‑tec Gold coating and coated carbide grade WMP30G deliver a combination of wear resistance and thermal stability that addresses the specific challenges of stainless steels: toughness, built‑up edge tendency and elevated cutting temperatures. The insert’s chipbreaker and coating work together to enable stable chip formation, reducing interruptions due to irregular chips and helping to maintain an even machining rhythm. This results in fewer unplanned index changes and improved process reliability for series production. Geometry designed to withstand robust cuts and secure edge strength The Trigon 80° shape provides a robust nose and broad support for the cutting edge, while the 0.8 mm corner radius increases edge strength for interrupted or heavier cuts. The negative 0° rake enhances edge security and reduces the risk of edge chipping when working with difficult stainless alloys. Together with the MM5 chipbreaker, the geometry supports consistent surface quality and tool life in demanding turning operations. Productivity gains through reduced downtime and repeatable performance Selecting this grade and geometry aims to lower overall machining cost per part by extending the interval between index changes and maintaining dimensional stability. The combination of coating, grade and chip control contributes to productive machining and fewer scrap parts, especially in batch or continuous runs. The tolerance class and stable cutting edge support repeatable results across tool changes, helping to keep setups predictable and cycle times steady. Practical application and handling advice for workshop integration This indexable insert is intended for standard toolholders designed for WNMG inserts and is simple to rotate or replace when the cutting edge reaches wear limits. For optimal results with the WNMG080408‑MM5 WMP30G insert, ensure rigid clamping of the toolholder and consistent cooling strategy adapted to the stainless alloy in use. The insert’s layout supports quick indexing to a fresh edge and straightforward integration into existing turning processes from Walter Tools. Request tailored technical advice from Metav Werkzeuge to integrate the Walter Tools Tiger‑tec Gold WMP30G insert into production; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080408-MM5-WMP30G-WALTER Name: Drehwendeschneidplatte WNMG080408-MM5 WMP30G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP30G Facts Plate form: Trigon 80° Corner radius: 0.8 mm Plate size: 08 Plate thickness: 04 Free rake angle: 0° (negative) Chipbreaker: MM5 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Suitable for: stainless steels (ISO group M) Execution: G Material code: M FAQ Is this insert suitable for a wide range of stainless steels? Yes. The WNMG080408‑MM5 WMP30G insert is designed for stainless steels (ISO group M) and supports medium to robust cutting conditions with stable chip formation. What role does the MM5 chipbreaker play? The MM5 chipbreaker promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of entangling chips during turning with the WMP30G grade. How does the Trigon 80° geometry affect machining? The Trigon 80° shape offers a robust nose and greater edge support, which enhances resistance to mechanical shock and helps maintain dimensional stability in tougher turning operations. Is the negative 0° rake beneficial for interrupted cuts? Yes. The negative 0° rake increases edge security and reduces the chance of chipping under interrupted or heavier cutting conditions when using this Walter Tools insert. Can the insert be used with standard WNMG toolholders? The insert is an indexable-type suitable for standard toolholders designed for WNMG geometry; replacement or indexing provides access to a fresh cutting edge when required. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
WNMG080408-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant grade and a robust geometry for consistent metalcutting performance; the insert’s Tiger‑tec Silver coating and WSM10S carbide grade ensure reliable chip formation and extended edge life. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. WNMG080408-MM5 WSM10S — Turning indexable insert, Trigon 80°, Tiger‑tec Silver (Walter Tools) The WNMG080408-MM5 WSM10S is a trigon indexable insert engineered for demanding turning of stainless steels and heat‑resistant superalloys, offering a mix of edge stability and thermal resistance for productive workshop use. Tiger‑tec Silver coated carbide grade WSM10S Trigon 80° geometry for secure engagement Chipbreaker MM5 for stable chip control Suitable for stainless steels and superalloys High‑performance grade for difficult materials The combination of the WSM10S carbide grade and the Tiger‑tec Silver coating targets applications with elevated temperatures and adhesive wear. This engineered coating improves thermal resistance and reduces flank wear, which translates into longer tool life and fewer interruptions for insert changes. For operations on austenitic stainless steels and nickel‑base alloys, the grade supports stable chip formation and helps avoid built‑up edge, reducing rework and improving first‑pass yield. Stable cutting edge and controlled chip behaviour The integrated chipbreaker MM5 is designed to generate predictable chips under heavy cut conditions, improving evacuation and reducing the risk of entanglement. Combined with the corner radius 0.8 mm and a negative 0° relief, the geometry provides a secure cutting edge for interrupted cuts and tough workpiece materials. These features together reduce vibration and support consistent surface finish, which benefits downstream processes and quality assurance. Geometry and mounting advantages for productivity The Trigon 80° form offers effective entry angles for radial engagement and is well suited to a range of turning operations, from roughing to semi‑finishing. The insert’s design and tolerance class M ensure repeatable positioning and reliable seating in standard WNMG toolholders, enabling quick tool changes and minimal setup time. This predictability supports higher machine utilisation and helps maintain cycle‑time targets on batch production. Application guidance that reduces machining risk Optimising cut parameters for the given grade and geometry will yield immediate gains: select moderate cutting speeds with adequate coolant for stainless steels, or prioritise edge stability for superalloys where heat dissipation is limited. The insert is particularly suited to components requiring secure chip control and consistent dimensional accuracy, supporting process reliability and reducing scrap rates in serial manufacturing. Choose Walter Tools’ Tiger‑tec Silver grade for demanding stainless and superalloy turning — contact Metav Werkzeuge for tailored cutting data and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080408-MM5-WSM10S-WALTER Designation: WNMG080408-MM5 WSM10S Series: Tiger‑tec Silver Manufacturer: Walter Tools Facts Plate form: Trigon 80° Relief angle: 0° (negative) Corner radius: 0.8 mm Size code: 08 Thickness code: 04 Chipbreaker: MM5 Grade: WSM10S Tolerance class: M Special features Coating: Tiger‑tec Silver (coated cemented carbide) Material suitability: Stainless steels (M) and heat‑resistant superalloys/titanium (S) Application: Heavy‑duty turning of difficult‑to‑machine alloys Edge condition: Stable cutting edge for secure chip formation FAQ What materials is this insert designed for? The WNMG080408-MM5 WSM10S insert is developed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal resistance and stable chip formation for these difficult materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating enhances thermal stability and reduces adhesion at the cutting edge, which extends the service life of the Walter Tools turning insert and improves process reliability. What is the benefit of the MM5 chipbreaker? The MM5 chipbreaker provides controlled chip segmentation under heavy cutting conditions, aiding evacuation and reducing the risk of chip entanglement on the workpiece or toolholder. Is the insert suitable for interrupted cuts and roughing operations? Yes, the Trigon 80° geometry combined with a 0.8 mm corner radius and negative 0° relief gives the insert robust edge support, making it suitable for interrupted cuts and aggressive roughing steps. Which toolholders fit this insert form? Standard WNMG toolholders accepting Trigon 80° inserts are compatible; the tolerances and form are designed for reliable seating and repeatable positioning in industry‑standard clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) belongs to the Sandvik group and is a leading manufacturer of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer.
WNMG080408-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant Tiger·tec Silver grade and a robust Trigon 80° geometry to maintain cycle time and surface quality when machining demanding alloys; order directly via Metav Werkzeuge or consult our application specialists for tailored machining parameters. WNMG080408‑MM5 WSM20S indexable turning insert — Trigon 80° with MM5 chipbreaker (Walter Tools) The WNMG080408‑MM5 WSM20S is an indexable turning insert designed for heavy‑duty machining of rostfreier Stahl and heat‑resistant superalloys, combining a coated carbide grade with a strong cutting geometry. Tiger·tec Silver coating for heat resistance Trigon 80° shape for a stable cutting edge MM5 chipbreaker for secure chip formation Optimised for rostfreier Stahl and superalloys Consistent productivity on rostfreier Stahl and superalloys The Tiger·tec Silver coating in the WSM20S grade is formulated to withstand the thermal and mechanical stresses typical of rostfreier Stahl and high‑temperature alloys. This results in stable chip formation and reduced risk of built‑up edge, which directly contributes to longer tool life and fewer unscheduled insert changes. For production environments where repeatability matters, the combination of a thermally resilient coating and a robust base microstructure enables higher cutting parameters with predictable surface finish and dimensional stability. Geometry that balances strength and surface finish The Trigon 80° form delivers a reinforced cutting edge that tolerates interrupted cuts and heavier depths of cut, while the 0.8 mm corner radius provides a compromise between edge strength and achievable surface quality. The 0° (negative) relief angle increases insert support in the pocket and reduces the likelihood of edge chipping under heavy loads. Together these geometric choices mean fewer tool‑related interruptions and an improved overall machining economy for demanding turning operations. Chip control and process security through MM5 design The MM5 chipbreaker is engineered to produce short, controllable chips when turning ductile and work‑hardening materials. For rostfreier Stahl and superalloys, predictable chip form reduces the risk of surface damage and minimises rework. Integrating this chipbreaker with the coated substrate of Tiger·tec Silver helps maintain a stable cutting edge, allowing for higher metal removal rates with consistent results and improved operator safety. Practical integration and tolerance assurance The insert designation WNMG080408‑MM5 WSM20S reflects a commonly available WNMG format that is compatible with standard toolholders for indexable turning. The product is delivered in a tolerance class M, ensuring interchangeability and repeatable seating in the tool pocket. For shops seeking a single‑grade solution across a range of rostfreier Stahl parts and selected high‑temperature alloys, this insert reduces inventory complexity while maintaining process reliability. For application advice tailored to machining rostfreier Stahl with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for machining recommendations and clamping compatibility — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: WNMG080408‑MM5‑WSM20S‑WALTER Designation: WNMG080408‑MM5 WSM20S Manufacturer: Walter Tools Product type: Indexable turning insert Facts Insert size: 08 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM20S (coated carbide) Chipbreaker: MM5 Shape: Trigon 80° Execution: G Material suitability: S / M Recommended application: rostfreier Stahl, heat‑resistant superalloys FAQ What materials is this insert best suited for? The WNMG080408‑MM5 WSM20S insert is optimised for machining rostfreier Stahl and heat‑resistant superalloys, reflecting the thermal and mechanical demands of those material groups. How does the MM5 chipbreaker affect machining performance? The MM5 chipbreaker on the WNMG080408‑MM5 WSM20S promotes short, controllable chips for safer handling and consistent surface finish when turning ductile and work‑hardening materials. Is the Trigon 80° geometry suitable for interrupted cuts? Yes, the Trigon 80° form with a robust cutting edge and a 0° (negative) relief angle improves insert support and is well suited to interrupted or heavy cutting conditions. Can this insert be used in standard WNMG toolholders? The insert follows standard WNMG dimensions and tolerance class M, so it is compatible with common WNMG toolholder systems; verify pocket design for optimal clamping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for identification and explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG080408-MM5 WSM30S MM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, a robust MM5 chipbreaker and the Trigon 80° form to ensure stable machining of stainless steel and high‑temperature alloys; order directly via Metav Werkzeuge or consult our specialists for process optimisation. WNMG080408-MM5 WSM30S — Indexable Turning Insert, Tiger‑tec Silver, for stainless steel & superalloys (Walter Tools) The WNMG080408-MM5 WSM30S is a Trigon 80° indexable turning insert engineered for reliable performance in stainless steel and heat‑resistant superalloys, combining a coated cemented‑carbide grade with a stable cutting geometry for demanding turning tasks. Tiger‑tec Silver coating for thermal stability Trigon 80° form with 0.8 mm corner radius Negative 0° rake for secure edge support Optimised for stainless steel and superalloys High thermal resistance for consistent cutting results The coated cemented‑carbide grade WSM30S, part of the Tiger‑tec Silver series, provides enhanced heat resistance and wear protection during long turning cycles. This combination reduces flank wear and supports more predictable tool life, which in turn leads to improved process stability and lower setup frequency. The integrated MM5 chipbreaker aids controlled chip formation, reducing the risk of built‑up edge and protecting the cutting edge under intermittent or high heat conditions. Geometry that prioritises edge strength and surface quality The Trigon 80° form with a 0.8 mm corner radius and a negative 0° free angle gives a secure cutting edge that resists chipping when facing the challenges of tough materials. The form also balances cutting forces to maintain dimensional accuracy and surface finish, so less rework is needed. Where edge robustness is essential, the geometry supports heavier cuts without sacrificing component tolerances or surface integrity. Designed for demanding materials and process security This insert is specified for material groups M and S: M for stainless steel and S for heat‑resistant superalloys and titanium. These materials demand a grade that tolerates high temperatures and poor thermal conductivity; WSM30S is tuned to those demands, offering stable chip control and consistent edge behaviour. The result is a more reliable production flow when machining reactive or work‑hardening alloys, with fewer unscheduled tool changes. Productivity and inventory advantages in production environments Using this grade and geometry reduces tool change frequency and simplifies inventory by covering both stainless and high‑temperature alloys in one specification. The insert’s balance of wear resistance and edge security supports longer tool life and predictable replacement intervals, contributing to lower total machining costs and improved throughput. Backing from a recognised supplier such as Walter Tools adds an extra layer of confidence in repeatability and quality. For tailored process advice on Walter Tools inserts, including the WNMG080408-MM5 WSM30S, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss material compatibility and optimisation options. Technical Data Article number: WNMG080408-MM5-WSM30S-WALTER Designation: WNMG080408-MM5 Product type: Drehwendeschneidplatte Brand: Walter Tools Facts Plate form: Trigon 80° Corner radius: 0.8 mm Plate size: 08 Thickness code: 04 Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM30S Chipbreaker: MM5 Material groups: S / M Suitable for: stainless steel, superalloys, titanium (depending on geometry) FAQ What materials are best machined with this insert? The WNMG080408-MM5 WSM30S is designed primarily for stainless steel (material group M) and heat‑resistant superalloys / titanium (group S), offering good chip control and thermal resistance for these challenging materials. How does the Tiger‑tec Silver coating benefit tool life? The Tiger‑tec Silver coating on the WSM30S grade increases heat resistance and reduces abrasive wear, which extends tool life and maintains cutting edge integrity under elevated temperatures. Which chipbreaker is integrated and what is its effect? This insert features the MM5 chipbreaker, which promotes controlled chip formation and reduces the likelihood of built‑up edge, improving surface finish and process reliability during turning. Is the Trigon 80° form suitable for heavy cuts? The Trigon 80° geometry with a 0.8 mm corner radius and negative free angle offers enhanced edge strength, making it suitable for more robust cutting conditions while preserving dimensional stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer Walter Tools.
WNMG080408-MP3 WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP05G grade and an MP3 chipbreaker to achieve dependable chip control and long tool life; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. WNMG080408-MP3 WPP05G Trigon 80° turning insert by Walter Tools — Tiger·tec Gold for steel The WNMG080408-MP3 WPP05G is a trigon-indexable turning insert designed for general steel machining, offering a Tiger·tec Gold coating and an MP3 chipbreaker for controlled cutting and consistent results. Tiger·tec Gold coated grade WPP05G MP3 chipbreaker for reliable chip control Trigon 80° geometry for secure clamping 0.8 mm corner radius for consistent edge strength Increase throughput with controlled chip formation The combination of the MP3 chipbreaker and the Tiger·tec Gold coating is engineered to deliver reliable chip control during medium-to-high cutting conditions. Controlled chips reduce the risk of tool interruption and machine downtime, which directly supports higher productive output. The chipbreaker geometry is designed to shape and evacuate chips effectively when machining steel, so feeds and speeds can be pushed with confidence while maintaining surface consistency. This technical pairing translates into measurable process stability for batch and single-part production. Secure clamping and repeatable edge integrity The trigon 80° form provides a stable seating and clamping surface, minimising insert movement under load. With a 0.8 mm corner radius and a 0° (negative) rake, the insert offers a robust cutting edge that resists chipping in interrupted cuts and tougher material sections. These geometric choices are intended to extend insert life and reduce frequency of changeovers, which supports predictable cycle times. The insert thickness code and form contribute to repeatable positioning in standard toolholders, ensuring consistent cutting geometry part after part. Specifically tailored for steel machining The WPP05G grade belongs to Walter Tools’ Tiger·tec Gold family and is optimised for the ISO P group, i.e. machining steel such as unalloyed and alloyed steels. The coating and substrate pairing are selected to handle the typical heat generation and chip formation characteristics of steel, offering a balance between wear resistance and toughness. For users less familiar with ISO groups: P indicates suitability for steel; the grade’s behaviour is tuned to sustain abrasive wear while maintaining a stable cutting edge under thermal load. Practical integration into production environments This insert type is compatible with common turning toolholders and is aimed at shops seeking consistent surface finishes and reduced process variability. Indexable inserts like this one simplify inventory management because a single geometry can cover a range of turning tasks. When applied with appropriate cutting data, the result is reduced scrap rates and fewer tool changes. For application-specific optimisation—such as selecting feeds, speeds or coolant strategies—technical consultation is advised to match the insert’s capabilities to the production requirement. For production environments prioritising process reliability, request a tailored recommendation for Walter Tools Tiger·tec Gold WPP05G inserts from Metav Werkzeuge or contact their consultants by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: WNMG080408-MP3-WPP05G-WALTER Designation: WNMG080408-MP3 WPP05G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 0.8 mm Free rake angle: 0° (negative) Plate form: Trigon 80° Plate size code: 08 Plate thickness code: 04 Tolerance class: M Special features Grade: WPP05G Chipbreaker: MP3 Material application: Steel (ISO P) Coating technology: Tiger·tec Gold Product type: Trigon turning insert FAQ Is this insert suitable for alloyed steel? Yes. The WPP05G grade in Tiger·tec Gold is optimised for the ISO P group and is suitable for both unalloyed and alloyed steels when appropriate cutting data are applied. What benefits does the MP3 chipbreaker provide? The MP3 chipbreaker is designed to shape and evacuate chips consistently; this reduces the likelihood of built-up edge and contributes to stable machining when using the WNMG080408-MP3 WPP05G insert from Walter Tools. Can this insert be used in interrupted cuts? Yes. The trigon 80° geometry combined with a 0.8 mm corner radius and a negative rake angle enhances edge robustness, making the insert more tolerant of interruptions and variations in cut engagement. How is the grade Tiger·tec Gold different from standard grades? Tiger·tec Gold coatings combine wear resistance with toughness to balance tool life and edge stability for steel machining; the WPP05G grade has been selected to meet these requirements for a broad range of steel applications. What should be considered when selecting holder geometry for this insert? Select a toolholder that supports trigon 80° inserts and secures the insert reliably to exploit the stable seating and repeatable cutting geometry of the WNMG080408-MP3 WPP05G. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for identification and explanation only; there is no affiliation between our company and the mentioned manufacturers. The offered article is an original, factory-new product from the manufacturer.
WNMG080408-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WPP10G grade and the MP3 chipbreaker to achieve efficient, repeatable steel turning with reliable chip control; order directly via Metav Werkzeuge or contact our consultants for application advice. WNMG080408-MP3 WPP10G — indexable turning insert, Trigon 80°, for steel (Walter Tools) WNMG080408-MP3 WPP10G is an indexable turning insert designed for productive machining of steels with a coated-carbide grade and an MP3 chipbreaker for consistent performance Tiger·tec Gold coating for wear resistance WPP10G grade optimised for steel machining MP3 chipbreaker for controlled chip formation Trigon 80° geometry for stable cutting action High-efficiency turning on steel: durable coating and grade for longer productive runs The combination of the Tiger·tec Gold coating and the WPP10G carbide grade delivers a balance between wear resistance and toughness tailored to steel machining. The coating technology reduces flank and crater wear under typical cutting temperatures, which results in longer tool life and fewer index changes during production. For shops aiming to increase uptime, this coated carbide solution supports more consistent cycle times and lower tool consumption, translating into measurable cost efficiency on batch and continuous turning operations. Predictable chip control and surface quality through optimised geometry The MP3 chipbreaker and Trigon 80° geometry provide controlled chip formation and a robust cutting edge that helps maintain dimensional stability. The insert’s 0° negative rake promotes a secure edge engagement in heavy cuts, reducing vibration and the risk of unstable chips. Together these features support a consistent surface finish and reliable chip evacuation, particularly beneficial in component production where repeatability and reduced rework are priorities. Robust edge form and repeatable performance for series production With a 0.8 mm corner radius and tolerance class M, the insert is built to offer a compromise between strength and finishing ability: the radius increases edge strength for interrupted cuts and higher feed operations, while the tolerance ensures repeatable seat fit and predictable cutting behaviour. The coated-carbide construction resists thermal and mechanical wear; the result is stable tool life and fewer unscheduled tool changes, which supports leaner setups and smoother shop-floor workflows. Clear application guidance and compatibility with ISO group P materials This insert is specified for ISO group P materials — in practical terms, unalloyed and alloyed steels. The tooling choice suits a range of turning tasks from roughing to medium finishing where controlled chip formation and wear resistance are required. For CNC turning centres and production lathes seeking a versatile, reliable insert for steel components, the combination of grade, chipbreaker and trigon geometry offers a straightforward path to reduced cycle times and consistent part quality. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Gold inserts into current production — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: WNMG080408-MP3-WPP10G-WALTER Designation: WNMG080408-MP3 WPP10G Product type: indexable turning insert Brand: Walter Tools Core measurements Plate form: Trigon 80° Corner radius: 0.8 mm Plate size: 08 Plate thickness: 04 Free rake angle: 0° (negative) Tolerance class: M Design & special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP3 Execution: G Material application: steel (ISO group P) FAQ What materials is this insert intended for? The WNMG080408-MP3 WPP10G insert from Walter Tools is specified for ISO group P materials, meaning it is intended for machining unalloyed and alloyed steels. How does the MP3 chipbreaker affect performance? The MP3 chipbreaker on the WNMG080408-MP3 promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of long, entangling chips during steel turning. What advantages does the Tiger·tec Gold series provide? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, which supports longer tool life and consistent cutting behaviour in steel applications. Is the 0° negative rake suitable for heavy cuts? Yes, the 0° negative rake of this insert promotes a strong cutting edge and stable engagement, making it appropriate for heavier cutting conditions and intermittent cuts. How does the 0.8 mm corner radius influence finish and strength? A 0.8 mm corner radius enhances edge strength for durability under load while still allowing respectable surface finishes at appropriate feeds, balancing robustness and finish quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
WNMG080408-MP3 WPP20G MP3 Wendeplatten - Walter Tools
Benefit from high process security and broad material coverage: the combination of a robust Trigon geometry and the Tiger·tec Gold coating ensures productive turning with reliable tool life. Order the WNMG080408-MP3 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. WNMG080408-MP3 WPP20G turning insert — Trigon 80°, Tiger·tec Gold coating, Walter Tools WNMG080408-MP3 WPP20G is an indexable turning insert designed for machining steel with a Trigon 80° form and a negative 0° rake angle Trigon 80° geometry for stable turning Tiger·tec Gold coating for extended life MP3 chipbreaker for controlled chip formation Negative 0° rake, 0.8 mm corner radius Higher throughput through coating and chip control The combination of the Tiger·tec Gold coating and the MP3 chipbreaker delivers improved tool life and consistent chip formation when machining ISO P materials (steel). The advanced coating reduces flank wear under typical steel cutting temperatures, which translates into longer operational intervals between index changes and fewer unplanned stoppages. As an indexable insert, this item is intended for series production where repeatability and predictable wear behaviour are decisive for process planning and cost control. Stable geometry for precise turning and surface quality A Trigon 80° shape with a 0.8 mm corner radius and a negative 0° rake provides mechanical strength at the cutting edge and resistance to edge chipping during interrupted cuts. This geometry supports stable cutting forces and helps maintain dimensional accuracy on shafts and turned faces. The tougher corner form is especially beneficial for medium to heavy turning operations where tool robustness outweighs the need for the finest possible nose radii. Practical benefits for shop-floor productivity Using the WPP20G grade means a balanced hardmetal substrate and coating designed for a broad range of steels, offering a compromise between wear resistance and toughness. The result is predictable performance across different steel grades and milling conditions, helping to reduce tooling variants in stock. The insert’s chip control and edge integrity contribute to fewer reworks and a more consistent process capability, supporting lean manufacturing targets and better utilisation of machine time. Application guidance and selection hints This turning insert is suited to general turning tasks on steel components, from roughing to medium finishing, and is particularly effective where robust edge stability is required. Selection should consider matching insert geometry and chipbreaker to the part application: the MP3 breaker is optimised for controlled chip segmentation in steels, while the Trigon 80° profile gives added edge strength for interrupted cuts. For tailored recommendations regarding feeds and cutting speeds, Metav Werkzeuge can provide application-specific advice and trial arrangements to validate performance in a given production setup Contact Metav Werkzeuge for application support and to secure Walter Tools Tiger·tec Gold inserts for consistent production performance — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: WNMG080408-MP3-WPP20G-WALTER SKU: WNMG080408-MP3-WPP20G-WALTER Label: Drehwendeschneidplatte WNMG080408-MP3 WPP20G Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WPP20G Facts Corner radius: 0,8 Free angle: 0° (negativ) Shape: Trigon 80° Size code: 08 Thickness code: 04 Special features Chipbreaker: MP3 Material application: Steel (ISO P) Tolerance class: M Execution: G Base designation: WNMG080408-MP3 FAQ What materials is this insert intended for? The insert is designed primarily for ISO P materials; the WPP20G grade from Walter Tools is optimised for machining steel. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating improves wear resistance and thermal stability, which typically extends the productive life of the insert under steel turning conditions. What advantages does the Trigon 80° form provide? Trigon 80° geometry offers increased corner strength and resistance to edge breakage, making it suitable for interrupted cuts and heavier turning operations. Which chipbreaker should be selected for controlled chips? The MP3 chipbreaker on this insert is tuned for reliable chip formation in steels and supports safe evacuation in both continuous and interrupted cuts. Is this insert suitable for finishing operations? The insert can be used for medium finishing; however, final surface requirement and part tolerances should guide the selection of nose radius and cutting parameters Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com