WNMG080408-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a Trigon 80° form and an NMS chipbreaker for reliable chip control and longer tool life in demanding stainless and heat-resistant alloy turning operations; order directly via Metav Werkzeuge or consult our specialists for cutting data and process integration. WNMG080408-NMS WSM10S indexable turning insert — Trigon 80°, WSM10S (Walter Tools) WNMG080408-NMS WSM10S is an indexable turning insert engineered for heavy-duty turning of rostfreier Stahl and high-temperature alloys, delivering robust edge stability and predictable chip formation. Tiger·tec Silver coated carbide grade WSM10S Trigon 80° geometry for secure clamping Negative 0° relief for robust cutting action NMS chipbreaker for stable chip control Higher cutting performance with fewer interruptions The combination of the WSM10S grade and the Tiger·tec Silver coating supports higher cutting speeds and extended tool life when machining rostfreier Stahl and heat-resistant superalloys. The graded, coated carbide reduces adhesive wear and enhances thermal resistance, which translates into fewer tool changes and more uninterrupted production time. This results in measurable process gains: improved cycle times and reduced secondary operations due to more consistent surface integrity. The insert’s design focuses on delivering efficient, dependable metal removal under challenging thermal and mechanical loads. Secure fixturing and predictable edge behaviour for stable processes The Trigon 80° form provides a wide seating surface for positive clamping in most toolholders, which supports repeatable tool positioning and minimises vibration. Paired with the negative 0° relief, the geometry favours strength of the cutting edge over shear comfort, making it particularly suitable for interrupted cuts and high radial engagement. The NMS chipbreaker is optimised for stable chip formation, reducing the risk of built-up edge and improving evacuation—this results in safer, more reliable shop-floor operation and fewer surface defects on the workpiece. Easy specification and integration into production Technical data such as the 0.8 mm corner radius and the standard plate dimensions simplify process planning and fixture selection. The insert’s properties make it a practical choice for batch and continuous turning operations where rostfreier Stahl and nickel-based alloys demand robust cutting edges and high thermal tolerance. Use the grade and geometry to fine-tune feed and speed: lower feed with this radius yields improved surface finish, while the grade allows modest increases in cutting speed compared with uncoated alternatives, boosting overall productivity with controlled tool consumption. Practical advantages for workshop and production planners Adopting an insert with the Tiger·tec Silver coating and WSM10S composition supports consistent results across shifts and operators, reducing variability and rework. The insert’s stability under heat and its optimised chip control lower the frequency of unscheduled stoppages and tool inspection. For procurement and process engineering teams, this means simpler inventory management thanks to an insert suitable for a broad range of difficult-to-machine materials and a proven pedigree from Walter Tools. Discuss specific application parameters or request tailored cutting data from Metav Werkzeuge — contact via info@metav-werkzeuge.com or +49 2822 7131930 to align the WNMG080408-NMS WSM10S with the process requirements. Technical Data SKU: WNMG080408-NMS-WSM10S-WALTER Article designation: WNMG080408-NMS WSM10S Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief / rake angle: 0° (negative) Plate size designation: 08 Thickness designation: 04 Tolerance class: M Special features Plate form: Trigon 80° Chipbreaker: NMS Material suitability: S / M Execution: G Sort: WSM10S FAQ What materials is this insert suited for? The WNMG080408-NMS WSM10S insert is designed for machining rostfreier Stahl and heat-resistant superalloys (ISO groups S and M), providing thermal stability and reliable chip control for these demanding materials. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WSM10S grade improves heat resistance and reduces adhesive wear, enabling higher cutting speeds and longer edge life compared with uncoated carbide inserts. Is the Trigon 80° form compatible with standard toolholders? Yes, the Trigon 80° geometry offers a broad seating surface that fits many standard turning toolholders intended for triangular indexable inserts, ensuring solid clamping and repeatable positioning. What role does the NMS chipbreaker play in operations? The NMS chipbreaker is optimised for stable chip formation during the machining of rostfreier Stahl and superalloys, promoting secure chip evacuation and reducing the risk of built-up edge and surface damage. Can this insert handle interrupted cuts and heavy engagement? With its negative 0° relief and robust edge design, the insert is well suited to interrupted cuts and applications with high radial engagement where edge strength and impact resistance are required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-NMS WSM20S WSM20S Wendeplatten - Walter Tools
High-performance turning capability with Tiger·tec Silver and the optimised NMS chipbreaker ensures stable edges and secure chip formation for stainless steels and superalloys; order the WNMG080408-NMS WSM20S directly via Metav Werkzeuge or contact our consultants for tailored cutting data. WNMG080408-NMS WSM20S – Indexable turning insert, Tiger·tec Silver coating, for stainless steels and superalloys | Walter Tools WNMG080408-NMS WSM20S is an indexable turning insert designed for heavy-duty turning and secure chip control when machining heat-resistant alloys and rostfreier Stahl. Tiger·tec Silver coated for long tool life Optimised NMS chipbreaker for secure chips Trigon 80° form for versatile turning Suitable for stainless steel and superalloys Consistent performance for demanding materials The combination of the WSM20S grade and the Tiger·tec Silver coating delivers consistent wear resistance and improved thermal stability when machining high-alloy steels and heat-resistant materials. The coating technology is a multilayer system applied to a coated carbide substrate, which supports a stable cutting edge and reduces adhesion tendencies common with stainless steels and superalloys. In practice, this means fewer interruptions for edge changes and steadier dimensional results, particularly in continuous or semi-continuous production where predictable tool life is essential. The insert’s construction emphasises high process reliability and constant performance over extended runs. Reliable chip control and geometry benefits The NMS chipbreaker is engineered to produce short, manageable chips under the cutting conditions typical of tricky-to-machine materials. Combined with the Trigon 80° insert form and a 0.8 mm corner radius, the geometry balances strength and edge engagement for interrupted cuts and shoulder turning. The 0° negative relief angle increases edge robustness and supports heavy feed applications, while the modest corner radius helps maintain surface integrity without sacrificing tool life. For users less familiar with insert geometry: a negative relief angle shifts cutting forces into the insert body, improving resistance to mechanical shock and enhancing edge stability during heavy cuts. Practical advantages that support shop productivity Tolerance class M and the standardised ISO designation allow straightforward substitution in existing toolholders and machining programmes, reducing setup complexity. The grade’s focus on secure chip formation and a stable cutting edge translates into less scrap, fewer tool changes and higher uptime — a tangible economic benefit on batch runs and high-mix production. Where teams require application guidance, the insert’s specification supports clear selection: coated carbide grade for thermal and chemical resistance, NMS chipbreaker for controlled chip flow, and Trigon form for flexible turning tasks. Together, these attributes make the insert a pragmatic choice for shops aiming to improve throughput without compromising surface quality. For precision turning in rostfreier Stahl and heat-resistant superalloys, request availability and cutting recommendations from Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com, and our specialists will advise on toolholder compatibility and feed-speed guidance. Technical Data SKU: WNMG080408-NMS-WSM20S-WALTER Label: Drehwendeschneidplatte WNMG080408-NMS WSM20S Walter Tools Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Insert form: Trigon 80° Insert size: 08 Thickness: 04 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: NMS Material groups: S / M (superalloys/titanium, stainless steels) Application: heavy-duty and high-temperature-resistant materials ISO designation: WNMG080408-NMS WSM20S FAQ What materials is this insert suited for? The WNMG080408-NMS WSM20S from Walter Tools is designed for rostfreier Stahl (stainless steels) and heat-resistant superalloys, corresponding to ISO groups M and S. How does the NMS chipbreaker affect machining? The NMS chipbreaker on this insert promotes short, controllable chips and stable chip flow, which improves workplace safety and reduces secondary operations related to chip management. Is the Trigon 80° form suitable for shoulder turning? Yes, the Trigon 80° geometry provides strength at the cutting edge and versatility for a range of turning operations, including shoulder work and external profiling when using the appropriate toolholder. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a compromise between edge strength and surface finish: it increases resistance to edge chipping while helping to maintain acceptable surface quality on interrupted and continuous cuts. How is the Tiger·tec Silver series reflected in tool life? The Tiger·tec Silver coating applied to the WSM20S grade enhances thermal stability and wear resistance, contributing to longer periods between insert changes and more consistent process results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
WNMG080408-NMS WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a coated carbide grade that supports secure chip formation and stable cutting edges for challenging materials; combine this with the Trigon 80° geometry and 0.8 mm nose radius for reliable finishing. Order the insert directly via Metav Werkzeuge or consult our technical team for application advice. WNMG080408-NMS WSM30S – Indexable turning insert with Tiger·tec Silver coating by Walter Tools The WNMG080408-NMS WSM30S is a Trigon 80° indexable turning insert engineered for machining rostfreier Stahl and heat‑resistant superalloys in demanding turning applications. Tiger·tec Silver coating for heat resistance Trigon 80° shape with 0.8 mm nose radius Designed for rostfreier Stahl and superalloys High performance for demanding materials The WSM30S grade, part of the Tiger·tec Silver series, is a coated carbide solution optimised for hard‑to‑machine alloys. Its formulation supports secure chip formation and reduces the tendency for built‑up edge when cutting rostfreier Stahl and high‑temperature alloys, delivering consistent surface quality under thermal load. The combination of the advanced coating technology and the chosen substrate enables sustained cutting conditions, making this insert a rational choice where process stability and reproducible results are priorities. Proven edge stability and machining consistency Equipped with the NMS chipbreaker and a 0° (negative) rake, the geometry of the insert increases edge strength for interrupted or heavy cuts while maintaining control over chip flow. The Trigon 80° profile with a 0.8 mm nose radius balances robustness and surface finish, reducing vibration and improving tool life in medium to finishing passes. These characteristics result in fewer tool changes and a more efficient production flow, emphasising measurable productivity gains in series turning operations. Practical guidance for workshop integration The insert’s tolerance class M and compact size 08 with thickness 04 allow straightforward indexing in standard toolholders designed for Trigon inserts. For workshop planners, this means quick replacement and compatibility with existing tool systems. When combined with appropriate cutting data for rostfreier Stahl and superalloys, the grade supports predictable wear patterns and repeatable part quality. For customers seeking a balance of performance and operational reliability, this indexable turning insert offers a clear, application‑oriented solution. Contact Metav Werkzeuge for ordering and tailored cutting recommendations for Walter Tools Tiger·tec Silver inserts — Metav Werkzeuge provides technical consultation and rapid delivery options. Technical data Article number: WNMG080408-NMS-WSM30S-WALTER Designation: WNMG080408-NMS WSM30S Base designation: WNMG080408-NMS Series: Tiger-tec Silver Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert shape: Trigon 80° Size: 08 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: NMS Material suitability: S / M Tolerance class: M Execution: G Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Application focus: rostfreier Stahl, heat‑resistant superalloys Geometry benefits: enhanced edge strength, stable chip formation FAQ What materials is this insert suited for? The WNMG080408-NMS WSM30S insert is designed for machining rostfreier Stahl and heat‑resistant superalloys, utilising the Tiger·tec Silver coating to support secure chip formation. What does the NMS chipbreaker deliver in practice? The NMS chipbreaker on the WSM30S grade improves chip control and reduces built‑up edge risk, resulting in more consistent surface finish and extended edge life. How does the Trigon 80° form affect machining? The Trigon 80° geometry provides increased strength at the cutting edge and good accessibility for profile and facing operations, with the 0.8 mm nose radius offering a balance between robustness and finish quality. Is the insert compatible with standard toolholders? Yes; the base designation WNMG080408-NMS corresponds to standard Trigon toolholders that accept size 08 inserts, allowing simple replacement and indexing in common turning systems. What manufacturing benefits does the Tiger·tec Silver series provide? Tiger·tec Silver coatings, combined with the WSM30S grade, increase thermal resilience and reproducible performance when machining difficult alloys, supporting stable production cycles and reduced downtime. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand‑new goods of the manufacturer.
WNMG080408-NMT WS10 WNMG080408-NMT Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide grade WS10, reliable chip control with the NMT breaker and the versatile Trigon 80° form for efficient turning and predictable part quality; order directly via Metav Werkzeuge or consult the team for material-specific cutting data. WNMG080408-NMT · WNMG080408-NMT WS10 turning insert (Trigon 80°) – Walter Tools The WNMG080408-NMT WS10 is a trigon turning insert for general and medium-duty turning, engineered to deliver stable wear performance and consistent chip control in coated-carbide applications. Coated carbide grade WS10 for stable wear Trigon 80° insert form for versatile turning 0.8 mm corner radius for predictable chamfers NMT chipbreaker for improved chip control Boosted productivity through stable wear resistance The use of the WS10 coated-carbide grade provides a balance of tool life and economy: the coating layer improves wear resistance while maintaining cutting-edge strength, which supports longer intervals between indexings. In production terms this means fewer tool changes and more uptime, directly contributing to improved throughput. The tolerance class M enhances repeatability in toolholders and fixtures, helping to keep process variation low and parts within dimensional tolerance. Reliable chip control and improved surface finish The combination of the NMT chipbreaker and the Trigon 80° geometry enables controlled chip formation across a range of feeds and depths of cut. The 0.8 mm corner radius strengthens the cutting edge and helps produce stable chamfers while reducing the tendency for edge chipping. The negative 0° rake (neutral rake) offers robust cutting behaviour on interrupted cuts and when higher feed forces occur, resulting in more consistent surface quality and less rework for downstream operations. Simple integration and clear application guidance Dimension codes and form design make the insert straightforward to integrate into standard turning systems: size code 08 and thickness code 04 align with common toolholder families, and the indexable insert format allows fast replacement to reduce tool-change downtime. The insert is part of Walter’s open series; material suitability should be checked against the specific product matrix to ensure optimal cutting conditions. For workshops looking to standardise on a single grade for mixed workloads, this insert offers a practical compromise between performance and versatility. Contact Metav Werkzeuge for application-specific cutting data, sample availability and tailored recommendations for the Walter Tools WNMG080408-NMT WS10 turning insert Technical Data Article number: WNMG080408-NMT-WS10-WALTER Designation: WNMG080408-NMT WS10 Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Core specifications Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Insert form: Trigon 80° Tolerance class: M Features & suitability Chipbreaker: NMT Grade: WS10 (coated carbide) Material reference: Katalogabhängig Application note: Verify workpiece suitability via product matrix Series description: Walter Schneidstoffsorte, coated carbide class FAQ What materials is this insert intended for? The WNMG080408-NMT WS10 insert is a coated-carbide grade intended for a wide mix of turning applications; specific material suitability should be checked in the product matrix for the Walter Tools range. How does the NMT chipbreaker affect machining? The NMT chipbreaker on this turning insert promotes short, controlled chips and improved evacuation, which helps maintain stable cutting forces and surface finish when using the WNMG080408-NMT WS10. Can this insert handle interrupted cuts or entry/exit conditions? Yes, the negative 0° rake and robust 0.8 mm corner radius provide edge strength for interrupted cuts; the WNMG080408-NMT WS10 is designed for enhanced resistance to chipping in such conditions. What does the size code 08 and thickness code 04 mean for toolholders? Size code 08 and thickness code 04 correspond to common insert families; compatible toolholders for trigon inserts will accept this form, enabling fast replacement of the WNMG080408-NMT WS10. Is there any special preparation required before use? No special preparation is required beyond selecting the correct toolholder and verifying cutting parameters; consult Metav Werkzeuge for recommended speeds and feeds tailored to the Walter Tools WS10 grade. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-NMT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating for enhanced wear resistance, a robust Trigon 80° geometry and a 0.8 mm corner radius for reliable chip control; order directly via Metav Werkzeuge or consult the team for application advice. WNMG080408-NMT WSM20S indexable turning insert — Trigon 80° form, Tiger·tec Silver coating (Walter Tools) A WNMG080408-NMT WSM20S indexable insert engineered for demanding turning of rostfreier Stahl and heat-resistant alloys, offering stable cutting edges and optimised chip formation Tiger·tec Silver coating for high wear resistance Trigon 80° form with 0.8 mm corner radius Negative 0° rake suited to interrupted cuts Optimised for rostfreier Stahl and superalloys Consistent performance for demanding materials The WNMG080408-NMT WSM20S is supplied in a coated carbide grade developed under the Tiger·tec Silver technology, which combines a wear-resistant coating with a substrate engineered for edge stability. This combination reduces flank wear and resists build-up on the cutting edge when machining rostfreier Stahl (ISO M) and materials in group S (heat-resistant superalloys and titanium). The technical design ensures stable chip formation and extended tool life, which supports predictable cycle times and fewer insert changes in production environments. Geometry and chip control that improve process reliability The Trigon 80° plate form together with the 0.8 mm corner radius and the NMT chipbreaker are coordinated to deliver robust performance in medium- to heavy-duty turning operations. The negative 0° rake increases edge strength and is advantageous for interrupted or unstable cuts, while the chipbreaker design promotes short, controlled chips that evacuate reliably from the cut. These geometric choices enable the insert to be used for both roughing and mixed finishing tasks where edge security and repeatability are priorities. Application benefits and operational clarity Plate size 08 and thickness 04 identify a compact insert format that fits many standard indexable holders, permitting straightforward integration into existing tooling systems. The WSM20S grade is optimised for materials that generate heat and tend to work-harden, so machining parameters can be adjusted toward productivity without compromising surface integrity. The result is a balance of productivity and process safety: fewer interruptions for tool changes and consistent surface quality across batches. Technical compatibility with common turning toolholders is expected, and insert seating tolerances adhere to industrial norms to support secure clamping and repeatable indexing. For reliable machining of rostfreier Stahl and superalloys, rely on Walter Tools’ Tiger·tec Silver inserts — contact Metav Werkzeuge to discuss suitability and toolholder matching via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: WNMG080408-NMT-WSM20S-WALTER Designation: WNMG080408-NMT WSM20S Brand: Walter Tools Data Corner radius: 0.8 mm Free rake angle: 0° (negative) Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Coating/series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: NMT Geometry: negative rake for interrupted cutting Material suitability: rostfreier Stahl (ISO M), superalloys and titanium (ISO S) Series description: designed for stable chip formation and robust cutting edge FAQ What materials is this insert designed to machine? The insert is specified for machining rostfreier Stahl (ISO M) and materials in the ISO S group such as superalloys and titanium; the WSM20S grade is optimised for these applications. Does the geometry suit interrupted cuts or heavy cuts? Yes, the negative 0° rake and the Trigon 80° form increase edge strength, making the insert appropriate for interrupted and heavier machining operations. How does the Tiger·tec Silver coating contribute to performance? The Tiger·tec Silver coating combines wear resistance with a substrate tuned for edge stability, which reduces wear rates and supports consistent surface finish when turning demanding materials. Are chip control and evacuation improved with this insert? The NMT chipbreaker and the 0.8 mm corner radius promote short, controlled chips and reliable evacuation, which helps to maintain stable cutting conditions. What insert dimensions are indicated by the designation 080408? The designation reflects the insert format: plate size 08 and plate thickness 04, with a corner radius of 0.8 mm and Trigon 80° geometry as specified. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a long-standing tradition in precision tools. The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names mentioned are the property of their respective owners and are cited for clarification only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
WNMG080408-NRS WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the Tiger-tec Silver grade and NRS chipbreaker for dependable chip control and stable cutting when machining rostfreier Stahl and heat-resistant alloys; secure supply or expert advice via Metav Werkzeuge is available to ensure the correct grade and geometry selection. WNMG080408-NRS WSM01 trigon 80° turning insert – coated carbide for rostfreier Stahl and superalloys by Walter Tools The WNMG080408-NRS WSM01 is a negative-rake trigon insert engineered for high-demand turning of rostfreier Stahl and heat-resistant superalloys, offering stable cutting edges and reliable chip formation in interrupted or continuous cuts. Tiger-tec Silver coated carbide grade WSM01 NRS chipbreaker for consistent chip control Trigon 80° geometry with 0.8 mm corner radius Negative 0° rake for heavy interrupted cuts Reliable cutting performance for demanding materials The combination of a Tiger-tec Silver coating with the WSM01 grade provides a balanced solution for machining tough-to-cut alloys. The coated carbide substrate increases resistance to thermal and mechanical wear, which helps to maintain a stable cutting edge under high temperatures. For applications involving rostfreier Stahl or nickel-based alloys, the coating supports secure chip formation and reduces the tendency for built-up edge, which in turn contributes to consistent surface quality and reduced tool exchanges. Predictable chip control and surface finish The integrated NRS chipbreaker is optimised to produce short, controlled chips in a wide range of cutting conditions, lowering the risk of chip entanglement and machine downtime. Controlled chip formation improves safety and facilitates continuous production runs, while the geometry of the insert promotes improved surface integrity. These factors help to increase process efficiency and can lead to a measurable improvement in overall machining throughput. Geometry tailored for robustness and versatility The Trigon 80° form combined with a 0.8 mm corner radius delivers a robust cutting edge suitable for moderate to heavy turning operations. The negative 0° rake angle enhances the insert’s resistance to shock and makes it well suited to interrupted cuts and hard inclusions commonly encountered in forgings or cast components. Together, these features enable the insert to offer both reliability and versatility across varied turning tasks. Practical guidance for selection and use Selecting the correct insert grade and geometry ensures consistent results and maximises tool life. Use the WSM01 grade where heat resistance and edge stability are priorities—particularly in the machining of rostfreier Stahl and superalloys. For best results, pair the insert with a rigid toolholder and appropriate cutting parameters for the workpiece material; this approach maintains edge condition and reduces unexpected downtime. When in doubt, seek application-specific recommendations to match feed, speed and depth of cut to the component requirements. For tailored advice or fast supply of Walter Tools inserts, contact Metav Werkzeuge on +49 2822 7131930 or info@metav-werkzeuge.com to discuss the optimal grade and geometry for the application Technical data Article number: WNMG080408-NRS-WSM01-WALTER Product type: Drehwendeschneidplatte Designation: WNMG080408-NRS WSM01 Series: Tiger-tec Silver Manufacturer: Walter Tools Core specifications Insert size: 08 Thickness code: 04 Corner radius: 0.8 mm Geometry: Trigon 80° Rake angle: 0° (negative) Tolerance class: M Design & features Grade: WSM01 (coated carbide) Chipbreaker: NRS Material suitability: S / M (superalloys and rostfreier Stahl) Execution: G Coating: Tiger-tec Silver FAQ Which materials is this insert suitable for? The WNMG080408-NRS WSM01 insert from Walter Tools is designed for machining rostfreier Stahl and heat-resistant superalloys, offering stable edge performance in demanding applications. What advantages does the Tiger-tec Silver coating provide? Tiger-tec Silver increases thermal and mechanical wear resistance on the WSM01 grade, supporting secure chip formation and prolonged tool life in high-temperature cutting. How does the NRS chipbreaker affect machining? The NRS chipbreaker on this Walter Tools insert provides consistent chip control, reducing the risk of long chips and improving operational safety and surface finish. Is the geometry suitable for interrupted cuts? Yes, the Trigon 80° shape with a 0.8 mm corner radius and negative 0° rake makes the insert robust for interrupted cuts and for handling hard inclusions. What is the tolerance class and what does it mean? Tolerance class M indicates the dimensional and edge quality of the insert; the WNMG080408-NRS WSM01 is supplied to this tolerance for reliable seating and repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
WNMG080408-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Silver coating, robust Trigon 80° geometry and the NRS chipbreaker for stable cutting in demanding turning operations; this yields longer tool life and consistent surface quality. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. WNMG080408-NRS WSM10S — Indexable turning insert, Tiger·tec Silver, Trigon 80° (Walter Tools) The WNMG080408-NRS WSM10S is a Trigon 80° indexable turning insert engineered for rostfreier Stahl and heat‑resistant alloys in heavy turning applications. Tiger·tec Silver coated carbide Trigon 80° geometry for tough cuts Negative 0° rake for edge stability 0.8 mm corner radius for robust edges Increased life and process reliability for difficult materials The combination of the WSM10S grade and the Tiger·tec Silver coating is designed to extend tool life when machining challenging materials. Because the grade is optimised for poor heat conduction and high cutting forces, it supports secure chip formation and a stable cutting edge, reducing unscheduled tool changes and downtime. This results in more predictable machining cycles and a measurable improvement in overall productivity for batch and single‑piece production alike. Geometry and chip control for consistent surface finish The Trigon 80° shape together with the NRS chipbreaker and a 0° negative rake angle delivers reliable chip control and edge strength in interrupted and continuous cuts. The 0.8 mm corner radius provides a compromise between edge robustness and surface fidelity, helping to avoid edge chipping while maintaining good finish. These geometric features allow the insert to perform consistently under variable depths of cut and workpiece irregularities. Application guidance for stainless and superalloy turning This indexable insert is specified for the ISO material groups M and S, meaning suitability for rostfreier Stahl and heat‑resistant superalloys or titanium. In practice, this implies the grade handles tendencies to work‑hardening and high thermal loads; appropriate cutting strategies combine moderate feed rates with controlled cutting speeds to preserve the coating and edge. The insert’s tolerance class M and its execution ensure repeatable positioning in standard WNMG holders, supporting process stability in production environments. Practical advantages in workshop use and tooling logistics With a standard WNMG geometry and a commonly used chipbreaker, the insert integrates easily into existing toolsets and reduces inventory complexity. The coated carbide grade helps to lower tooling costs per part through longer intervals between index changes, while the Trigon form increases cutting robustness in heavy‑duty operations. Guidance from tooling specialists can help to match the insert to specific holder types and to fine‑tune feeds and speeds for optimal economy and surface quality. For application advice or to request tailored recommendations for the WNMG080408-NRS WSM10S, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: WNMG080408-NRS-WSM10S-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Facts Corner radius: 0.8 mm Free rake angle: 0° (negative) Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Special features Chipbreaker: NRS Material applicability: S / M Suitable for: rostfreier Stahl (M) Tolerance class: M Execution: G FAQ What materials is this insert suitable for? The WNMG080408-NRS WSM10S insert is specified for ISO groups M and S, making it suitable for rostfreier Stahl and for heat‑resistant superalloys or titanium as a turning insert from Walter Tools. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM10S grade improves wear resistance and thermal stability, extending edge life and supporting consistent performance in demanding turning operations. Is the Trigon 80° geometry compatible with standard WNMG tool holders? Yes, the insert’s Trigon 80° form is designed for standard WNMG holders; the tolerance class M ensures repeatable seating and positioning for stable cutting. What role does the NRS chipbreaker play? The NRS chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and helping to maintain surface finish when turning difficult materials. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius provides a durable cutting edge that resists chipping under heavy loads while still delivering an acceptable surface quality for most general turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners; they are used here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG080408-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a Trigon 80° geometry and the NRS chipbreaker for stable chip control and extended edge life when machining stainless steel and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult the advisors for cutting data and tool recommendations. WNMG080408-NRS WSM20S turning insert — Trigon 80°, Tiger·tec Silver (Walter Tools) WNMG080408-NRS WSM20S is a trigon‑form indexable turning insert engineered for heavy machining of stainless steel and heat‑resistant superalloys. Tiger·tec Silver coating for edge stability Suitable for stainless steel and superalloys Trigon 80° form with 0.8 mm corner radius NRS chipbreaker for controlled chip formation Greater process stability with coated carbide technology The coated carbide design, identified by the WSM20S grade, combines a wear‑resistant substrate with the Tiger·tec Silver multilayer coating to reduce flank wear and crater formation under high thermal load. For production environments handling tough materials, this results in more consistent tool life and fewer unexpected interruptions. The insert’s geometry and coating work together to support secure chip formation, helping maintain steady cycle times and predictable tool replacement intervals. Reliable surface quality through optimised geometry A Trigon 80° profile with a 0.8 mm corner radius provides a balance between strength at the cutting edge and achievable surface finish. The slightly negative clearance (0° negative) and the robust tip radius make the insert suitable for interrupted cuts and operations where edge robustness is critical. As a consequence, process engineers can expect improved dimensional reliability and a reduced need for secondary finishing on components made from stainless steel and similar materials. Efficient chip control lowers machine downtime The NRS chipbreaker has been developed to manage chip flow in difficult‑to‑cut materials, producing short, controllable chips that evacuate reliably from the cutting zone. Better chip control reduces toolholder interference and minimises manual chip handling, which supports safer, more efficient machining cycles. Combined with the insert’s trigon form, the chipbreaker helps maintain stable cutting forces and consistent heat distribution along the cutting edge. Versatility for demanding material groups Classified for the ISO material groups M and S, the insert addresses stainless steel (group M) and heat‑resistant superalloys and titanium (group S). The WSM20S grade is formulated to tolerate elevated temperatures and to preserve a sharp, productive cutting edge under challenging thermal and mechanical conditions. This versatility makes the insert suitable for a wide range of engineering and industrial turning tasks where durability and repeatability are priorities. Contact Metav Werkzeuge for tailored cutting data, availability and rapid delivery of the Walter Tools WNMG080408-NRS WSM20S with Tiger·tec Silver coating — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: WNMG080408-NRS-WSM20S-WALTER Designation: WNMG080408-NRS WSM20S Manufacturer: Walter Tools Product type: turning insert Facts Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Plate form angle: 80° Tolerance class: M Special features Grade: WSM20S (coated carbide) Coating technology: Tiger·tec Silver Chipbreaker: NRS Suitable material groups: M (stainless steel), S (superalloys / titanium) Series: Tiger‑tec Silver Version: G FAQ What materials is this insert designed for? The WNMG080408-NRS WSM20S is specified for ISO groups M and S, making it suitable for stainless steel and heat‑resistant superalloys or titanium where high thermal load and tough cutting conditions occur. What are the key geometry features and their benefits? The trigon 80° form with a 0.8 mm corner radius and a 0° negative clearance angle gives a robust cutting edge that tolerates interrupted cuts while maintaining acceptable surface quality for heavy turning. Which coating and grade are used and why do they matter? This insert uses the WSM20S grade within the Tiger·tec Silver coating system; the combination improves wear resistance and edge stability under the high temperatures typical of machining stainless steel and superalloys. How does the NRS chipbreaker affect performance? The NRS chipbreaker delivers consistent, short chips that evacuate reliably, reducing the risk of chip entanglement and supporting smoother, safer machining cycles when working with tough materials. Is the insert suited for finishing or roughing operations? The robust geometry and corner radius make this insert primarily suited to medium to heavy machining and roughing in demanding materials; certain fine finishing tasks are possible depending on cutting parameters and holder setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
WNMG080408-NRS WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature stability, controlled chip formation and robust edge life for reliable turning of demanding alloys; order original Walter inserts directly via Metav Werkzeuge or consult our product specialists for application support. WNMG080408-NRS WSM30S trigon turning insert — Tiger·tec Silver, for rostfreier Stahl (Walter Tools) The WNMG080408-NRS WSM30S is a trigon 80° turning indexable insert designed for heavy-duty and high-temperature machining of rostfreier Stahl and heat‑resistant alloys. Tiger·tec Silver coating for wear resistance Optimised NRS chipbreaker for secure chip control Trigon 80° geometry for sturdy cutting edges Suitable for rostfreier Stahl and superalloys High-temperature stability that keeps production running The Tiger·tec Silver coating and the underlying coated carbide substrate provide pronounced wear resistance at elevated cutting temperatures, which translates to longer tool life and fewer interruptions on the shop floor. For materials that are difficult to machine, such as rostfreier Stahl and nickel‑based alloys, thermal stability reduces the tendency for edge breakdown and built‑up edge formation, improving process consistency. This focused durability supports higher productivity by allowing secure cutting parameters with predictable performance. Consistent chip control and reduced rework The insert’s NRS chipbreaker is engineered to control chip form across a range of feeds and depths of cut, lowering the risk of entanglement and surface damage. Stable chip evacuation reduces cycle variability and lessens the need for manual intervention, which benefits both single‑piece flows and batch production. With a reliable chip behaviour, downstream processes see fewer defects and rework rates decline, contributing to more efficient use of machine time and personnel. Geometry that enhances edge security and rigidity The Trigon 80° contour combined with a 0° negative rake (0° negative) yields a robust cutting edge suited to interrupted cuts and heavy radial engagement. The relatively large corner radius (0.8 mm) promotes edge strength and supports consistent radial load distribution, which is particularly valuable when machining tough alloys where edge chipping is a concern. These geometric choices prioritise process reliability and support higher metal removal rates while maintaining surface integrity. Practical application guidance for integration Designed for standard WNMG toolholders, this insert is straightforward to specify and replace in conventional turning setups. The WSM30S grade is tuned to balance toughness and hot hardness, making it suitable for operations where thermal loads and material toughness are limiting factors. When selecting cutting parameters, favour moderate cutting speeds with increased feed to maintain stable chip breaking; trial cuts will confirm the optimum settings for each component programme. If a different edge form or smaller radius is required, match the insert geometry to the toolholder and cycle requirements to ensure compatibility. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to order the genuine WNMG080408-NRS WSM30S; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support Technical Data Article number: WNMG080408-NRS-WSM30S-WALTER Article designation: WNMG080408-NRS WSM30S Manufacturer: Walter Tools Facts Insert form: Trigon 80° Corner radius: 0.8 mm Thickness: 4 (04) Rake angle: 0° (negative) Grade/series: WSM30S — Tiger·tec Silver Special features Coating: Tiger·tec Silver Substrate: Coated carbide Chipbreaker: NRS Material suitability: rostfreier Stahl (M), superalloys / titanium (S) Application focus: heavy‑duty and high‑temperature turning FAQ What materials is this insert best suited for? The WNMG080408-NRS WSM30S is designed primarily for rostfreier Stahl and for heat‑resistant superalloys and titanium, offering stability under high thermal stress. How does the NRS chipbreaker affect machining? The NRS chipbreaker promotes manageable chip forms across typical feeds and depths, improving evacuations and reducing the chance of surface blemishes or tool interference. Is the insert compatible with standard WNMG toolholders? Yes, the geometry matches standard WNMG toolholders; ensure correct clamping and clearance angles for secure operation. Why choose Tiger·tec Silver for demanding turning tasks? Tiger·tec Silver provides improved thermal resistance and wear control compared with uncoated grades, which supports extended edge life in tough cutting conditions. What corner radius is available on this SKU and what is its benefit? This SKU features a 0.8 mm corner radius, which increases edge robustness and reduces chipping risk during interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-RM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, a stable RM5 chipbreaker and an 80° trigon form for reliable stainless-steel turning — order directly via Metav Werkzeuge or contact our consultants for application advice. WNMG080408-RM5 WMP20G Drehwendeschneidplatte — Trigon 80° turning indexable insert, Walter Tools The WNMG080408-RM5 WMP20G is a Trigon 80° turning indexable insert engineered for machining stainless steel under medium to robust cutting conditions, delivering consistent chip control and edge stability. Tiger·tec Gold coating for enhanced wear resistance Grade WMP20G optimised for stainless steel machining Trigon 80° shape for stable cutting edge RM5 chipbreaker for controlled chip formation Consistent performance for stainless-steel operations This insert combines a coated carbide grade (WMP20G) from the Tiger·tec Gold series with a geometry tuned for demanding work on stainless steel. The dedicated grade supports stable chip formation and resists edge build-up, which helps maintain process reliability during longer cuts. The insert’s robustness and coating synergy reduce the frequency of edge changes and contribute directly to higher productive uptime and predictable cycle times. Geometry and chip management that protect the cutting edge The Trigon 80° form and RM5 chipbreaker work together to provide consistent chip formation and evacuation in materials that tend to produce stringy or adhesive chips. A 0° negative rake creates a more robust cutting edge suited to interrupted or heavy cuts, while the 0.8 mm corner radius increases edge strength and extends service life under abrasive and adhesive conditions. These design choices reduce the risk of premature edge failure and support stable surface quality in serial turning applications. Practical benefits for shop-floor integration As an indexable insert with a proven geometry and coating combination, this product offers straightforward integration into existing tooling systems that accept WNMG-style inserts. The WMP20G grade is specified for group M materials according to ISO classifications, making selection simpler for engineers who require assured performance on stainless steel. The controlled tool behaviour reduces rework and supports consistent part quality, which in turn improves labour efficiency and lowers overall production variability. For productive stainless-steel turning with the Tiger·tec Gold WMP20G grade, contact Metav Werkzeuge for tailored selection, availability and machining recommendations — Metav Werkzeuge can advise on insert clamping and compatible toolholders to suit the process. Technical data Article number / SKU: WNMG080408-RM5-WMP20G-WALTER Product: Drehwendeschneidplatte / turning indexable insert Grade: WMP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Shape designation: Trigon 80° Size designation: 08 Thickness designation: 04 Special features Chipbreaker: RM5 Material group suitability: M (stainless steel) Coating: Tiger·tec Gold (coated carbide) Intended application: turning of stainless steel Geometry: robust edge for interrupted and continuous cuts FAQ What materials is this insert designed for? The WNMG080408-RM5 WMP20G insert is specified for stainless steel (ISO group M) and is optimised to manage the typical toughness and heat characteristics of these alloys. How does the RM5 chipbreaker affect machining on stainless steel? The RM5 chipbreaker promotes controlled chip formation and evacuation on stainless steel, reducing the risk of built-up edge and improving surface consistency when using the WMP20G grade. Is the 0° negative rake suitable for heavy cuts? Yes, the 0° (negative) rake produces a stronger cutting edge that resists chipping under heavier or interrupted cuts, supporting reliability in robust turning operations. Which toolholders accept this insert type? This insert follows the WNMG 08 geometry and fits standard toolholders designed for WNMG-style indexable inserts; ensure the clamping seat matches the Trigon 80° form for secure mounting. Hersteller: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. References to brand names such as Walter Tools are for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned brands beyond the sale of original, factory-new products. The offered article is an original, factory-new item of the manufacturer.
WNMG080408-RM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WMP20S grade for reliable performance when machining stainless steel; the Trigon 80° geometry with a 0.8 mm corner radius and RM5 chipbreaker provides stable cutting and predictable tool life — order directly via Metav Werkzeuge or contact the technical consultants for tailored advice. WNMG080408-RM5 WMP20S indexable turning insert, Trigon 80°, Tiger‑tec Silver – Walter Tools The WNMG080408-RM5 WMP20S is a trigon-shaped indexable turning insert designed for machining stainless steel under medium to robust cutting conditions, combining a coated carbide grade and a chipformer for secure chip flow and consistent edge life Tiger‑tec Silver coated grade WMP20S Optimised for stainless steel (M) Trigon 80° insert geometry 0.8 mm corner radius for robust cutting RM5 chipbreaker for secure chip control Durable coating for extended cutting performance The combination of the Tiger‑tec Silver coating and the WMP20S carbide grade delivers enhanced wear resistance and stable cutting edges when working with stainless steel. This coating technology reduces adhesion and thermal degradation at the cutting zone, which helps to maintain a consistent edge over repeated indexings. For production environments where edge stability and repeatable results are priorities, this insert offers a measurable improvement in process reliability without sacrificing surface quality. The design supports safer chip formation, which in turn reduces the risk of built-up edge and unplanned interruptions. Geometry that improves control and reduces risk With a Trigon 80° profile and a 0.8 mm corner radius, the insert provides a balance between strength and accessibility for turned features. The RM5 chipbreaker is tuned to encourage short, controllable chips when machining tough alloys, while the 0° negative rake enhances cutting edge robustness for interrupted or heavier cuts. These geometrical choices translate into fewer regrinds, lower vibration sensitivity and more consistent component tolerances during extended runs. The resultant stability also supports predictable tool-change intervals and smoother shop-floor planning. Practical benefits for process efficiency As an indexable insert, the component simplifies tool management: fewer inserts are required compared with brazed tools, and a rapid index or replacement restores cutting performance without extensive downtime. The coated grade minimises the frequency of interventions and supports production targets with steady part quality. For procurement and inventory strategies, the standardised ISO designation allows straightforward cross-referencing and compatibility checks with established toolholder systems, enabling faster tool set-up and reduced machine idle time. Application fit and machining advice Specified for ISO group M materials, this insert is particularly suited to stainless steel, which typically exhibits toughness, work hardening and higher heat generation at the cutting edge. The WMP20S grade and the insert’s chip control features are intended to mitigate these challenges by promoting stable chip formation and protecting the cutting edge against adhesion. For practitioners working in component manufacturing where stainless alloys are common, the insert offers a balance of edge life and surface finish that supports both medium and more demanding machining tasks. For tailored technical guidance on Walter Tools inserts such as the WNMG080408-RM5 WMP20S and to arrange supply through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and ordering. Technical data Article number: WNMG080408-RM5-WMP20S-WALTER Designation: WNMG080408-RM5 ISO designation: WNMG080408-RM5 WMP20S Manufacturer: Walter Tools Grade: WMP20S Series: Tiger‑tec Silver Core specifications Insert geometry: Trigon 80° Corner radius: 0.8 mm Clearance angle: 0° (negative) Plate size: 08 Plate thickness: 04 Chipbreaker: RM5 Execution: G Material code: M Materials & special features Coating technology: Tiger‑tec Silver Suitable for: stainless steel (ISO group M) Designed for: medium to robust machining conditions Stable chip formation and edge life Indexable turning insert format FAQ What materials is this insert suitable for? The WNMG080408-RM5 WMP20S is specified for stainless steel (ISO group M) and is optimised to handle the toughness and heat sensitivity typical of these alloys. What are the main benefits of the Tiger‑tec Silver WMP20S grade? Tiger‑tec Silver in the WMP20S grade offers improved wear resistance and adhesion control, enabling the insert to keep a stable cutting edge and consistent performance in stainless steel applications. Which geometry and chip control features does the insert have? This indexable insert features a Trigon 80° shape, 0.8 mm corner radius, 0° negative rake and an RM5 chipbreaker, which together support secure chip control and enhanced edge strength. Is the insert intended for finishing or roughing operations? The WMP20S grade and the insert geometry are designed for medium to robust cutting conditions; they provide a compromise between durability for heavier cuts and the capacity to deliver acceptable surface quality for semi-finishing tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Efficient machining of stainless steel is enabled by the combination of the Tiger‑tec Gold WMP30G grade and the RM5 chipbreaker, while the Trigon 80° geometry with a 0.8 mm corner radius provides consistent edge stability; order the WNMG080408-RM5 WMP30G turning insert directly via (Metav Werkzeuge) or ask our consultants if needed. WNMG080408-RM5 WMP30G turning insert — Tiger‑tec Gold, for stainless steel — Walter Tools WNMG080408-RM5 WMP30G is a Trigon 80° turning insert with a Tiger‑tec Gold coating, engineered for reliable, medium-to-robust stainless steel turning under demanding conditions Tiger‑tec Gold WMP30G coating for stainless steels RM5 chipbreaker for stable chip formation Trigon 80° geometry with 0.8 mm corner radius Increased productivity for stainless steel turning The WNMG080408-RM5 WMP30G insert combines a coated carbide substrate with the Tiger‑tec Gold technology to tackle the typical challenges of machining stainless steel: material toughness, tendency to build-up on the cutting edge and elevated thermal load. The WMP30G grade supports a controlled wear pattern that prolongs tool life and reduces unplanned interruptions. By favouring a stable cutting edge and predictable abrasion behaviour, machining cycles are more consistent and process control is simplified. Stable chip control and surface quality The RM5 chipbreaker is designed to form and evacuate chips reliably in turning operations of stainless steels. Controlled chip formation reduces the risk of entanglement and improves surface finish; the upshot is fewer secondary operations and less machine downtime. The insert’s negative rake (0°) and Trigon 80° geometry distribute cutting forces in a way that is advantageous for interrupted cuts and shoulder work, where robustness and edge retention are essential. Geometry that supports repeatable results With a 0.8 mm corner radius and compact plate proportions (size 08, thickness 04), the geometry of the insert balances edge strength and versatility. The Trigon 80° shape allows for secure seating in a broad range of toolholders while the moderate corner radius reduces the likelihood of chipping under increased feed or interrupted cuts. For users less familiar with insert geometry: a larger radius improves edge life but increases cutting forces, whereas the chosen 0.8 mm radius offers a practical compromise for general stainless‑steel turning. Practical guidance for integration into production The coated grade and chipbreaker are intended for medium to robust cutting conditions typical in industrial stainless‑steel applications. The Tiger‑tec Gold coating enhances thermal resistance and protects the cutting edge under elevated temperatures, enabling higher cutting speeds compared with uncoated grades in similar conditions. When adapting cutting data, prioritise stable clamping and sufficient coolant or controlled dry strategies, since the insert is optimised to maintain process stability and consistent component quality rather than maximum aggressiveness. For machining stainless steel with the reliability of Walter Tools’ Tiger‑tec Gold technology, contact Metav Werkzeuge for availability and tailored cutting data: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: WNMG080408-RM5-WMP30G-WALTER Product type: turning insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WMP30G Chipbreaker: RM5 Facts Insert shape: Trigon 80° Corner radius: 0.8 mm Free rake angle: 0° Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Coated carbide grade Tiger‑tec Gold Optimised for stainless steel (ISO group M) Negative rake configuration Designed for stable chip formation and edge retention FAQ What materials is this insert suitable for? The WNMG080408-RM5 WMP30G insert is optimised for stainless steel (ISO group M) and is intended for medium to robust cutting conditions in that material group. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes reliable chip formation and evacuation during turning of stainless steels, which helps to maintain surface quality and reduce rework caused by poor chip control. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WMP30G grade increases thermal resistance and wear protection, supporting longer tool life and more consistent cutting performance under elevated temperatures typical for stainless‑steel machining. Is the geometry suitable for interrupted cuts? Yes, the Trigon 80° geometry combined with a negative rake and 0.8 mm corner radius provides robustness and reduced risk of edge chipping during interrupted or shoulder turning operations. Can the insert be used with standard toolholders? The Trigon 80° form and the WNMG clamping design are compatible with a wide range of standard turning toolholders that accept WNMG inserts. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Walter Tools is a brand presentation of Walter AG and is mentioned here for explanation; there is no affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the named manufacturer.
WNMG080408-RM5 WPP10G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and versatile Tiger·tec Gold performance for productive steel turning — order directly via Metav Werkzeuge or consult our specialists for process integration. WNMG080408-RM5 WNMG080408-RM5 WPP10G Turning insert for steel — Walter Tools The WNMG080408-RM5 WPP10G is a Trigon 80° turning insert designed for efficient, repeatable turning of steel components in industrial production. Tiger·tec Gold coated carbide grade WPP10G Trigon 80° geometry for stable cuts RM5 chipbreaker optimised for steel 0° negative rake with 0.8 mm corner radius Increased productivity through proven grade and coating The combination of the WPP10G grade with Tiger·tec Gold coating delivers improved wear resistance and thermal stability in steel machining. The coated carbide substrate resists abrasive wear and maintains edge integrity in continuous turning operations, making it a rational choice for shops seeking lower tooling costs per part. With the Trigon 80° form and a designed RM5 chipbreaker, the insert promotes stable chip control and reliable surface finish, reducing the need for rework and increasing process throughput. Predictable machining and easy tool selection Featuring a 0° negative rake and 0.8 mm corner radius, the insert provides consistent cutting behaviour across a range of cutting parameters. These geometric details mean lower risk of edge chipping under interrupted cuts and improved robustness for general-purpose turning of steels (P-group). The clear specification of geometry and grade simplifies tooling decisions and inventory management, enabling planning based on measurable performance rather than trial and error. Practical benefits for production environments The insert’s RM5 chipbreaker and the Tiger·tec Gold technology support a balanced performance between wear resistance and toughness, offering a cost-efficient solution for medium- to high-volume turning. In practice, this translates to fewer tool changes, predictable tool life and consistent component quality. For customers looking to integrate the insert into existing toolholders, the standard WNMG form factor and thickness make retrofitting straightforward without additional adapter investments. For high-process security with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into specific turning processes Technical data SKU: WNMG080408-RM5-WPP10G-WALTER Article: WNMG080408-RM5 WPP10G Product type: Turning indexable insert Brand: Walter Tools Core data Insert size: 08 Thickness: 04 (mm) Corner radius: 0.8 mm Free rake: 0° (negative) Insert shape: Trigon 80° Tolerance class: M Design and special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RM5 Suitable for: Steel (P group) Execution: G FAQ What materials is this insert suitable for? The insert is specified for steel machining (ISO group P); the WNMG080408-RM5 with WPP10G grade is optimised for unalloyed and alloyed steels. How does the RM5 chipbreaker influence performance? The RM5 chipbreaker is engineered for controlled chip formation in steel turning, improving surface finish and helping maintain consistent tool life. Is this insert compatible with standard WNMG toolholders? Yes, the geometry and dimensions follow the WNMG form factor and are compatible with standard toolholders designed for this indexable plate type. What production benefits can be expected from Tiger·tec Gold coating? The Tiger·tec Gold coating offers enhanced wear resistance and thermal stability, leading to longer tool life and fewer changes in continuous turning operations. Does the 0° negative rake affect cutting forces? A 0° negative rake provides a robust edge that tolerates more demanding cutting conditions and interrupted cuts, trading slightly higher cutting forces for improved edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-RM5 WPP20G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a versatile WPP20G grade for steel machining and a compact trigon geometry for consistent chip control — for smooth, productive turning. Order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080408-RM5 WNMG080408-RM5 WPP20G – indexable turning insert for steel, Walter Tools WNMG080408-RM5 WPP20G is an indexable turning insert designed for reliable steel machining with Tiger·tec Gold coating. Tiger·tec Gold coating for high wear resistance Grade WPP20G optimised for steel machining Trigon 80° insert with 0.8 mm corner radius Negative 0° geometry with RM5 chipbreaker Consistent performance for steel turning operations The combination of the WPP20G grade and the Tiger·tec Gold series provides a balanced performance profile tailored to steel machining. The coated cemented carbide composition offers a compromise between wear resistance and toughness, which reduces flank and crater wear under typical turning conditions. For production environments seeking predictable tool life and repeatable part quality, this geometry promotes stable cutting forces and controlled heat management, thereby improving process reliability and lowering unexpected downtime. Geometry and chip control that simplify setup With an 80° trigon shape and a 0.8 mm corner radius, the insert delivers a versatile edge for a range of turning tasks, from light finishing to medium roughing. The RM5 chipbreaker is engineered to form short, controlled chips when machining steel, reducing the risk of chip entanglement and improving surface integrity. The negative 0° rake provides a robust cutting edge that better resists edge chipping in interrupted cuts or unstable clamping conditions, making the insert suitable for demanding turning operations in mixed-production shops. Productivity gains through material and coating technology The Tiger·tec Gold coating technology increases resistance against abrasive wear while maintaining a resilient substrate layer underneath. This results in longer intervals between index changes and fewer tool interventions on the machine. The WPP20G grade is identified as a versatile option across ISO group P (steel), offering an attractive balance of economy and performance for batch production and job-shop environments where tool change frequency directly impacts throughput. Practical selection and application guidance When selecting cutting parameters, prioritise stable clamping and appropriate feed rates to leverage the insert’s geometry and chipbreaker design. The WNMG080408-RM5 WPP20G insert performs well in typical steel alloys and can be integrated into existing tool holders that accept WNMG-format inserts. For customers requiring assistance with parameter settings, toolholder compatibility or process optimisation, Metav Werkzeuge offers technical consultation to ensure the insert is applied for maximum efficiency and repeatable part quality. Choose Walter Tools’ Tiger·tec Gold insert WNMG080408-RM5 WPP20G via Metav Werkzeuge for dependable steel turning — contact our Metav Werkzeuge specialists for tailored application support Technical Data Article number: WNMG080408-RM5-WPP20G-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP20G Facts Insert shape: Trigon 80° Size designation: 08 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Special features Chipbreaker: RM5 Coating: Tiger·tec Gold (coated cemented carbide) Material suitability: Steel (ISO P) Tolerance class: M FAQ What materials is the insert suitable for? The WNMG080408-RM5 WPP20G insert is optimised for steel (ISO group P), with the WPP20G grade designed to handle the heat and chip formation typical of steel turning. Which chipbreaker is fitted and what is its effect? This insert features the RM5 chipbreaker, which produces short, controlled chips and improves surface quality and operator safety during steel turning. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating increases wear resistance while preserving edge toughness, extending tool life and reducing changeover frequency in repetitive machining. Is the geometry suitable for finishing and roughing? Yes, the 80° trigon shape with a 0.8 mm corner radius offers versatility for light finishing to medium roughing applications in steel. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-RM5 WSM10S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and the Tiger·tec Silver coating for consistent performance in demanding turning operations; order originals or request application advice from Metav Werkzeuge. WNMG080408-RM5 WSM10S turning indexable insert — Tiger·tec Silver, Trigon 80°, Walter Tools The WNMG080408-RM5 WSM10S is a trigon turning insert engineered for robust metal removal in the machining of rostfreier Stahl and heat‑resistant superalloys, offering a negative 0° relief for heavy cutting tasks. Tiger·tec Silver coating for extended tool life Optimised for rostfreier Stahl and superalloys Trigon 80° geometry with 0.8 mm corner radius Negative 0° relief for stable heavy cuts Consistent productivity through optimised coating and grade The graded WSM10S carbide, developed within the Tiger·tec Silver family, combines a wear‑resistant coating with a substrate tuned for toughness, delivering stable cutting edge behaviour when machining challenging alloys. In practice, this means fewer tool changes and improved cycle times on long production runs; the RM5 chipbreaker supports a predictable chip form, which reduces interruptions and enhances overall process reliability. For operations facing frequent edge wear or built‑up edge formation, the coated grade contributes directly to sustained cutting performance and lower total machining costs. Robust geometry for demanding turning applications A trigon 80° shape with negative 0° relief provides mechanical strength at the cutting edge and superior resistance to shock loads during roughing. The 0.8 mm corner radius increases durability while still allowing sensible surface finish in follow‑up passes. This geometry supports aggressive depth of cut and feeds without compromising insert life, making the insert suitable for heavy‑duty external turning and interrupted cuts where edge stability is essential. The trigonal form also enables economical indexing and maximises usable cutting edges per insert. Material compatibility explained and practical advantages Marked for ISO groups S and M, the insert is suitable for heat‑resistant superalloys and rostfreier Stahl; these materials present high thermal stress and tend to form long, tough chips. The RM5 chipbreaker aids effective chip segmentation and evacuation, reducing the risk of entanglement and surface damage. For users less familiar with the terminology: a negative relief angle means the insert presents a stronger cutting nose by sacrificing a small amount of clearance, which is beneficial for interrupted cuts and roughing; the chipbreaker profile controls chip curl and thickness to improve machining stability. Quality, traceability and expected outcomes Manufactured by Walter Tools, the insert is produced to tolerance class M, ensuring dimensional consistency across batches and predictable tool performance in automated workflows. The combination of coated carbide technology and a reinforced trigon form aims to deliver reproducible surface integrity and extended tool life, which supports leaner inventory planning and fewer machine stops. Where process certainty and repeatable results matter, this grade provides a pragmatic balance of wear resistance and edge strength. Contact Metav Werkzeuge for tailored application advice and to secure original Walter Tools Tiger·tec Silver turning inserts for demanding rostfreier Stahl and superalloy machining tasks Technical data Article number / SKU: WNMG080408-RM5-WSM10S-WALTER Type designation: WNMG080408-RM5 WSM10S Grade / Series: WSM10S / Tiger·tec Silver Manufacturer: Walter Tools Core specifications Insert size: 08 Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Geometry: Trigon 80° Tolerance class: M Material compatibility & features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: RM5 Suitable for: S (superalloys), M (rostfreie Stähle) Application: External turning, heavy cuts, interrupted cuts Designation: Trigon insert, negative geometry, indexable turning insert FAQ What materials is this insert designed for? The WNMG080408-RM5 WSM10S insert is formulated for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), where heat resistance and edge stability are required. How does the RM5 chipbreaker benefit machining? The RM5 chipbreaker on the insert promotes controlled chip formation and evacuation, which helps maintain surface quality and reduces interruptions from chip entanglement. Is the negative 0° relief suitable for interrupted cuts? Yes, the negative 0° relief increases cutting‑edge strength and is particularly robust for interrupted machining and heavy roughing tasks using the WNMG080408‑RM5 insert. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and thermal stability, contributing to longer tool life and more consistent performance in demanding turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands; the offered article is original, brand‑new merchandise from the manufacturer (Walter Tools).
WNMG080408-RM5 WSM20S RM5 Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated grade and the RM5 chipformer delivers stable chip control and extended edge life for demanding turning tasks; the Trigon 80° form with a 0.8 mm corner radius provides versatility between roughing and semi-finishing. Order the insert directly via Metav Werkzeuge or consult our application specialists for process-adapted recommendations. WNMG080408-RM5 WSM20S — Trigon 80° turning insert, Tiger·tec Silver, Walter Tools WNMG080408-RM5 WSM20S is a trigon-shaped turning insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant alloys, combining a robust negative geometry with a precision chipformer for reliable production performance. Tiger·tec Silver coating for high wear resistance RM5 chipformer for secure chip control Trigon 80° geometry for versatile turning 0.8 mm corner radius for durable cutting edge Reliable performance on rostfreier Stahl and superalloys The WSM20S grade, part of the Tiger·tec Silver family, is a coated carbide solution tailored for challenging materials such as rostfreier Stahl and high-temperature superalloys. Its coating chemistry improves thermal stability and reduces flank wear, which translates into longer tool life and fewer indexings in serial production. The insert’s negative 0° rake configuration increases edge strength and permits higher feed rates under interrupted cuts, while the Trigon 80° profile balances accessibility and strength for both external turning and light profiling tasks. This combination supports consistent cycle times and reduces process variability in daily machining. Stable chip control and cutting-edge integrity The RM5 chipformer on this trigon insert is designed to manage chip formation in materials that tend to produce long, stringy chips or generate high cutting heat. By promoting segmented or curled chips, the chipformer enhances evacuation and reduces the risk of re-cutting, which helps preserve the cutting edge and workpiece surface. The 0.8 mm corner radius provides a compromise between strength and surface finish: a larger radius increases edge robustness for heavier cuts, while still enabling acceptable surface quality during semi-finishing. In practice, this results in fewer interruptions, improved throughput and less manual rework after turning operations. Practical advantages and recommended applications Using the WNMG080408-RM5 WSM20S insert in workshop and production settings brings tangible benefits: greater process reliability when machining tough alloys, lower tooling consumption due to enhanced wear resistance, and simplified insert selection thanks to a standard trigon form factor. The insert is particularly suited to operations on rostfreier Stahl and titanium or nickel-based alloys where heat resistance and edge stability are essential. For those less familiar with chipformer geometries, the RM5 designation denotes an emphasised chip control design ideal for medium to heavy turning, whereas the trigon shape facilitates multiple cutting edges per index for economical usage. For tailored advice on integrating Walter Tools trigon inserts into existing turning processes and for fast supply via Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge’s specialists will assist with application parameters and ordering. Technical Data Article number: WNMG080408-RM5-WSM20S-WALTER Product type: Turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Grade: WSM20S Series: Tiger-tec Silver Designation: WNMG080408-RM5 WSM20S Core specifications Corner radius: 0.8 mm Free rake angle: 0° (negative) Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Tolerance class: M Design & features Coating: Tiger·tec Silver Chipformer: RM5 Material application: S / M (superalloys, rostfreier Stahl) Execution: G Plate designation without grade: WNMG080408-RM5 FAQ Which materials is this insert designed for? The WNMG080408-RM5 WSM20S insert from Walter Tools is designed for machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), offering enhanced thermal and edge stability for challenging alloys. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance and reduces wear rates, helping to extend tool life and maintain a consistent cutting edge under elevated temperatures typical of rostfreier Stahl and superalloy machining. How does the RM5 chipformer affect machining? The RM5 chipformer promotes controlled chip breakage and reliable evacuation, reducing the chance of long, entangling chips and improving surface quality and process security during medium to heavy turning operations. Is the Trigon 80° form suitable for finishing passes? The Trigon 80° geometry with a 0.8 mm corner radius is primarily suited to roughing and semi-finishing; it provides a robust edge for heavier cuts while allowing acceptable surface finishes in follow-up operations. What does the negative 0° rake mean for cutting conditions? A negative 0° rake increases edge strength and resistance to chipping, making the insert appropriate for interrupted cuts and tougher materials; this geometry may require slightly higher cutting forces compared with more positive geometries. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Benefit from a combination of economic efficiency and robust cutting performance: the WSM30S carbide grade paired with the RM5 chipbreaker delivers stable chip formation and extended edge life for demanding alloys; consistent results are achievable even in stainless steels and superalloys. Order the WNMG080408-RM5 WSM30S indexable turning insert directly via Metav Werkzeuge or consult our specialists if application advice is required. WNMG080408-RM5 WSM30S — indexable turning insert, Tiger·tec Silver, for stainless steels and superalloys — Walter Tools WNMG080408-RM5 WSM30S is a Trigon 80° insert optimised for machining high-strength and heat-resistant materials, providing a reliable balance of edge stability and chip control. Tiger·tec Silver grade WSM30S Optimised RM5 chipbreaker Trigon 80° geometry, 0.8 corner radius Suitable for stainless steels and superalloys High-performance grade for demanding components The WSM30S cutting grade, part of the Tiger·tec Silver family, is engineered for tough-to-machine alloys. Its coated cemented carbide composition improves wear resistance and thermal stability, which reduces the risk of premature flank wear under elevated temperatures. This translated into predictable tool life and fewer in-process interruptions when turning materials that tend to work-harden or form built-up edges. For production environments where component consistency matters, the graded coating technology supports longer runs and more reliable cycle times. Geometry that improves chip control and surface integrity The insert’s RM5 chipbreaker and Trigon 80° form combine to manage chip flow and reduce contact time at the cutting edge, which helps to avoid entanglement and ensures repeatable surface finishes. The 0.8 corner radius strengthens the cutting edge for heavy engagement, while the 0° (negative) clearance geometry provides rigidity in robust toolholder systems. Together, these features reduce vibrations and support stable cutting conditions, resulting in fewer reworks and improved process throughput for shops working with stainless steels and nickel-based alloys. Process security and practical application notes Tolerance class M and the material designation S / M indicate suitability for stainless steels (M) and heat-resistant superalloys or titanium (S). The combination of a robust chipbreaker and the Tiger·tec Silver coating assists with controlled chip formation, which is particularly important when machining components that are prone to stringing or galling. In practice, select the insert geometry and cutting parameters with an emphasis on chip evacuation and coolant strategy to exploit the insert’s strengths; when correctly applied, the indexable insert supports both roughing passes with stable edge life and finishing passes that preserve surface quality. For consultation on cutting data or to secure original Walter Tools inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on the ideal grade and geometry for the application. Technical Data Article number: WNMG080408-RM5-WSM30S-WALTER Designation: WNMG080408-RM5 WSM30S Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Core Data Plate size: 08 Plate thickness: 04 Corner radius: 0.8 Clearance angle: 0° (negativ) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM30S Chipbreaker: RM5 Plate form: Trigon 80° Material suitability: S / M Application suitability: rostfreier_stahl (stainless steels) FAQ What materials is this insert best suited for? This indexable turning insert in grade WSM30S is designed for stainless steels (M) and heat-resistant superalloys or titanium (S), offering enhanced thermal stability for those groups. How does the RM5 chipbreaker affect machining? The RM5 geometry promotes reliable chip control and reduced tool engagement, which improves surface quality and reduces the risk of chip-related interruptions when machining demanding alloys. Is the Trigon 80° form suitable for heavy-duty turning? Yes — the Trigon 80° shape combined with a 0.8 corner radius provides edge strength and stability for heavier cuts while maintaining the option for fine finishes. Which tolerance class applies and what does it mean? Tolerance class M denotes the manufacturing precision of the insert; it supports consistent seating and repeatable performance in suitably matched toolholders. Can this insert be used for finishing passes? When cutting parameters and toolholder rigidity are appropriately adjusted, the combination of the Tiger·tec Silver coating and the RM5 chipbreaker enables both productive roughing and quality finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Walter Tools is mentioned for explanation purposes; there is no affiliation implied. The offered article is original, brand-new merchandise from the manufacturer.
WNMG080408-RP5 WKK10S WKK10S Wendeplatten - Walter Tools
Benefit from the combination of the WKK10S grade and Tiger‑tec Silver coating for high wear resistance and reliable chip control; the Trigon 80° geometry with RP5 chipbreaker ensures stable, productive turning in cast iron. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. WNMG080408-RP5 WKK10S indexable turning insert — Trigon 80°, RP5 chipbreaker by Walter Tools The WNMG080408-RP5 WKK10S is a Trigon 80° indexable insert designed for efficient turning of cast iron, combining a coated carbide grade with an RP5 chipbreaker for controlled short chips and consistent surface finish. Tiger‑tec Silver coating for wear resistance Designed for cast iron machining Trigon 80° form with 0.8 mm corner radius RP5 chipbreaker for reliable chip control Delivering consistent productivity in cast iron turning The coated carbide WKK10S grade within the Tiger‑tec Silver family delivers robust wear resistance and extended edge life when machining abrasive cast-iron materials. The Trigon geometry and the RP5 chipbreaker are designed to produce short, controllable chips, which reduces downtime associated with chip evacuation and improves cycle-time stability. This combination translates into fewer insert changes and a more consistent production flow for batch and single‑piece turning applications. Practical advantages of the Trigon form and edge design A Trigon 80° profile with a 0.8 mm corner radius offers a balance between strength and profile precision: the larger corner radius increases edge stability in interrupted cuts, while the negative 0° relief helps sustain cutting forces on heavy cuts. The insert’s geometry is particularly suitable for facing and general turning operations in cast iron, where breakable chips and abrasive wear are typical challenges. The design supports predictable performance and simplifies toolset selection on CNC lathes. How the Tiger‑tec Silver coating benefits daily shop use The Tiger‑tec Silver coating is a multi-layer technology that improves thermal and abrasive resistance on the cutting edge, enabling reliable performance under varying cutting speeds. For cast-iron turning—where hard graphite and abrasive constituents accelerate wear—this coating helps preserve the cutting edge, securing repeatable component quality and reducing tooling costs per part. The result is higher productivity and less process variation across shifts. For procurement or technical advice on Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data SKU: WNMG080408-RP5-WKK10S-WALTER Designation: WNMG080408-RP5 WKK10S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: RP5 Facts Plate size: 08 Plate thickness: 04 Corner radius: 0.8 mm Plate form: Trigon 80° Relief angle: 0° (negative) Tolerance class: M Special features Coated carbide (Tiger‑tec Silver) Optimised for cast iron machining Designed for short, breaking chips Stable chip formation and edge life FAQ What materials is this insert designed for? The insert is optimised for cast iron machining; the WKK10S grade in the Tiger‑tec Silver series is tuned for abrasive wear and short, breaking chips typical of cast materials. How does the RP5 chipbreaker affect performance? The RP5 chipbreaker promotes controlled, short chips and reliable chip evacuation, improving process stability and reducing the risk of rework on turned components. Can the insert be used for interrupted cuts? Yes, the Trigon 80° form combined with a 0.8 mm corner radius increases edge strength, making the insert suitable for interrupted turning operations in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; info@walter-tools.com Walter Tools is part of the Sandvik group and is recognised as a leading manufacturer of precision tools for metalworking, offering reliable tool life and consistent results. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
WNMG080408-RP5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, robust Trigon geometry and reliable chip control to keep turning operations productive and predictable; order directly via Metav Werkzeuge or ask the consultants for application support. WNMG080408-RP5 WKK20S indexable turning insert, Trigon 80° – Tiger‑tec Silver, Walter Tools WNMG080408-RP5 WKK20S is a Trigon 80° indexable turning insert designed for productive machining of cast iron, combining a Tiger‑tec Silver coating with a robust chipbreaker for stable, repeatable results. Tiger‑tec Silver coating for high wear resistance Optimised for cast iron (ISO K classification) Trigon 80° geometry with 0.8 mm corner radius Reliable wear performance for cast‑iron production The cutting grade WKK20S in the Tiger‑tec Silver series is formulated for cast iron applications (ISO K). The coated carbide grade resists the abrasive wear typical of grey and nodular cast irons and is engineered to handle the frequently short, breaking chips found in these materials. This yields a consistent tool life and reduced variance in regrind cycles, which in turn supports predictable production planning and lower process costs per component. Geometry and chip control that stabilise turning cycles The Trigon 80° plate form and the RP5 chipbreaker combine to deliver reliable chip formation and evacuation in interrupted or continuous cuts. The insert’s 0.8 mm corner radius increases edge strength and helps maintain surface finish on demanding cast‑iron parts, while the 0° (negative) rake angle prioritises edge stability under higher forces. Together these features reduce vibration, permit more aggressive feeds when appropriate, and contribute to fewer unplanned tool changes on the shop floor. Practical dimensions and mounting for efficient handling This indexable insert is supplied in the standard WNMG format (size 08, thickness 04), compatible with common toolholders for turning operations; tolerance class M ensures consistent fit and repeatable positioning when indexing corners. The combination of standard sizing and proven grade simplifies inventory management and allows for fast replacement during routine servicing. For production teams seeking stable performance in cast‑iron turning, the insert balances robustness with the ability to achieve good surface quality and repeatable tolerances. For productive cast‑iron turning with Walter Tools’ Tiger‑tec Silver technology, contact Metav Werkzeuge for tailored application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG080408-RP5-WKK20S-WALTER Article designation: WNMG080408-RP5 WKK20S Type: indexable turning insert Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RP5 Applicable material group: cast iron (ISO K) Plate form: Trigon 80° FAQ What materials is this insert best suited for? The WNMG080408-RP5 WKK20S is optimised for cast iron machining and is specified for ISO K material groups, offering improved wear resistance on abrasive cast‑iron grades. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Trigon insert produces short, controlled chips in cast‑iron turning, improving evacuation and reducing the risk of entanglement or surface damage. Can this insert be indexed on standard holders? Yes; the WNMG080408-RP5 format (size 08, thickness 04) fits widely used turning toolholders, and the tolerance class M supports repeatable indexing and stable clamping. What operational advantage does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WKK20S grade increases resistance to abrasive wear common in cast iron, extending tool life and helping to maintain consistent cutting performance across batches. Is the geometry suitable for interrupted cuts? The Trigon 80° form, combined with a 0.8 mm corner radius and a negative 0° rake, gives enhanced edge strength and robustness for interrupted or heavy‑cut conditions in cast‑iron turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Where referenced, brand names are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
WNMG080408-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the RP5 chipbreaker for reliable chip control and extended tool life in steel turning operations; the robust Trigon 80° form and 0.8 mm corner radius further enhance edge stability in demanding cuts. Order the insert directly via Metav Werkzeuge or consult the team for application guidance. WNMG080408-RP5 WPP05G — Trigon 80° indexable turning insert, Tiger‑tec Gold, Walter Tools WNMG080408-RP5 WPP05G is a Trigon‑form indexable insert engineered for steel turning where a robust cutting edge and predictable tool life are required Tiger‑tec Gold coating for longer tool life RP5 chipbreaker for controlled chip formation Trigon 80° geometry for secure clamping 0.8 mm corner radius for edge strength High-precision performance for steel machining The Tiger‑tec Gold coating combined with the WPP05G grade provides a coated carbide substrate designed specifically for machining steel (ISO P). This pairing reduces flank wear and maintains cutting performance under the thermal and mechanical stresses typical of steel turning. The Trigon 80° geometry contributes a stable seating in the toolholder, which improves repeatability in interrupted cuts and heavy roughing passes. By selecting this insert, process planners gain a balance of hardness and toughness that promotes consistent tool life. Stable chip control and secure cutting edge Built with the RP5 chipbreaker, the insert promotes regular chip formation and evacuation during continuous turning of steels, lowering the risk of choking or unstable chips at typical feed ranges. The 0° negative rake encourages a robust cutting edge, while the 0.8 mm corner radius increases edge strength for grooves and shoulder work. These geometric choices translate into fewer unplanned tool changes and more predictable machining cycles, supporting higher uptime and operational efficiency on the shop floor. Efficiency and repeatability in production The combination of a coated carbide grade and purpose‑designed chip control contributes to measurable process benefits: improved surface finishes at comparable cutting conditions and a more reliable margin before edge breakdown. For production environments aiming for stable outputs, the insert helps to reduce variation between batches and supports consistent component tolerances. The design is especially suitable where machining steel components demands both durability and repeatable cutting behaviour. For applications that prioritise dependable chip control and prolonged tool life, contact Metav Werkzeuge for tailored recommendations on the Walter Tools WNMG080408-RP5 WPP05G insert — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: WNMG080408-RP5-WPP05G-WALTER Designation: WNMG080408-RP5 WPP05G Product type: indexable turning insert Series: Tiger‑tec Gold Facts Insert form: Trigon 80° Corner radius: 0.8 mm Relief angle: 0° (negative) Thickness code: 04 Size code: 08 Tolerance class: M Special features Grade: WPP05G Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: RP5 Material application: steel (ISO P) Geometry: Trigon 80° Execution: G FAQ What materials is this insert intended for? The WNMG080408-RP5 WPP05G insert is specified for steel (ISO P) applications and is engineered to manage the thermal and chip‑formation characteristics typical of steel machining. What does the grade WPP05G indicate? WPP05G denotes Walter Tools’ coated carbide grade within the Tiger‑tec Gold family, optimised for a mix of wear resistance and toughness suited to steel turning. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker is designed to produce stable, controllable chips during steel turning, improving evacuation and reducing the likelihood of chip interference at standard feeds. What advantages does the Trigon 80° form provide? The Trigon 80° form offers a secure clamping interface and a robust cutting geometry that favours interrupted cuts and operations requiring a strong cutting edge. Is this insert suitable for stainless steel? Stainless steel is not specified among the listed material applications for this grade; suitability and performance for stainless operations are therefore not indicated. Hersteller: Walter Tools — The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080408-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust trigon 80° geometry and the RP5 chipbreaker for consistent steel machining results; this insert delivers reliable wear resistance and stable chip formation. Order directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. WNMG080408-RP5 WPP10G Drehwendeschneidplatte — turning insert for steel, Tiger‑tec Gold by Walter Tools A WNMG080408-RP5 WPP10G turning insert engineered for steel machining, combining a trigon 80° shape with 0° negative rake and an RP5 chipbreaker for dependable production performance WPP10G Tiger‑tec Gold coating Trigon 80° strong geometry 0.8 mm corner radius for stability RP5 chipbreaker for steel Consistent wear resistance for long tool life The Tiger‑tec Gold coating and the WPP10G grade provide a balanced combination of wear resistance and toughness specifically tuned for steel (ISO group P). This coated carbide formulation reduces flank and crater wear in continuous production, which translates into longer periods between indexings and fewer unexpected process interruptions. The result is measurable stability in batch runs and reduced variance in part quality, supporting efficient, predictable machining cycles. Geometry that improves process security and edge life The trigon 80° geometry and a 0.8 mm corner radius create a mechanically robust cutting edge that resists chipping during moderate interruption or heavy engagement. The 0° negative rake increases edge strength and helps maintain cutting-edge integrity under higher radial loads. Together these features deliver repeatable dimensional accuracy and make the insert suitable for a wide range of turning tasks where secure cutting and repeatability are priorities. Optimised chip control for fewer secondary operations Equipped with the RP5 chipbreaker, the insert guides chip formation to produce manageable, controllable swarf when machining steel. Improved chip control reduces the risk of surface damage and toolholder interference, decreasing time spent on chip clearing and secondary cleaning operations. For process engineers this means improved cycle efficiency and lower likelihood of rework, supporting a leaner machining workflow. Application guidance and integration in existing tooling systems The insert is made for standard WNMG toolholders and is compatible with common clamping systems used in turning centres. Selection is straightforward for general turning, semi‑finishing and situations requiring good edge stability. For optimal results, match the WPP10G grade and RP5 chipformer to recommended feeds and speeds for steel; specific parameters depend on component geometry and machine rigidity. If cutting data or parameter tuning is required, Metav Werkzeuge offers application support and can provide recommended cutting charts for given steels and machine setups. Contact Metav Werkzeuge for tailored cutting recommendations and to request availability of Tiger‑tec Gold WPP10G inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: WNMG080408-RP5-WPP10G-WALTER Designation: WNMG080408-RP5 WPP10G Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 04 Corner radius: 0.8 mm Rake: 0° (negative) Shape: Trigon 80° Tolerance class: M Special features Grade: WPP10G Series: Tiger‑tec Gold Chipbreaker: RP5 Coated carbide Material application: steel (ISO group P) Execution: G FAQ What steels is this insert suited for? The WNMG080408-RP5 WPP10G insert is optimised for machining steels (ISO group P); the Tiger‑tec Gold coating and WPP10G grade balance wear resistance and toughness for a broad range of steel alloys. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this insert promotes reliable chip control when turning steel, reducing the need for manual chip handling and lowering the risk of surface damage. Can this insert handle interrupted cuts? Yes — the trigon 80° geometry combined with the 0.8 mm corner radius and 0° negative rake provides enhanced edge strength for applications that include moderate interruptions. Is the insert compatible with standard WNMG toolholders? The insert conforms to the WNMG form factor and is intended for use in standard WNMG toolholders; ensure correct clamping and seat cleanliness for repeatable results. What benefits does Tiger‑tec Gold bring to daily production? Tiger‑tec Gold coating improves wear resistance and thermal stability, translating into longer tool life and consistent part quality across repetitive production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
WNMG080408-RP5 WPP20G G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WPP20G grade for versatile steel turning, the Trigon 80° geometry for secure clamping, and the RP5 chipbreaker for consistent chip control. Order the WNMG080408-RP5 directly via Metav Werkzeuge or consult our technical advisors for machining recommendations. WNMG080408-RP5 WPP20G turning insert, Trigon 80°, Tiger·tec Gold for steel – Walter Tools The WNMG080408-RP5 WPP20G is a Trigon 80° negative-insert designed for productive steel turning, combining a wear-resistant Tiger·tec Gold coating with an RP5 chipbreaker for stable chip formation. Tiger·tec Gold coated carbide grade WPP20G Optimised RP5 chipbreaker for steel applications Trigon 80° form for rigid clamping and stability 0.8 mm corner radius for improved surface finish Consistent productivity through advanced grade and coating The Tiger·tec Gold WPP20G grade provides a balanced combination of wear resistance and toughness specifically tailored for steel (ISO P) machining. This results in predictable tool life and reduced process variation, which supports higher machine uptime and consistent part quality. The coated carbide layer improves thermal stability and reduces flank wear, enabling longer cutting intervals and fewer insert changes. For operations where repeatable performance and reduced tooling costs matter, this grade delivers measurable benefits. Reliable chip control for safer, faster turning The integrated RP5 chipbreaker is optimised for common steel turning tasks, promoting controlled chip formation under a wide range of cutting conditions. Stable chips reduce the risk of surface damage and shorten cycle times because interrupted feed or rework is minimised. The combination of chipbreaker geometry and the Tiger·tec Gold coating improves metal flow at the cutting edge, which is particularly advantageous in medium to heavy roughing where consistent evacuation of swarf is critical for operator safety and machine protection. Geometry and seat design that enhance accuracy and clamping security The Trigon 80° insert form, with a 0.8 mm corner radius and a negative 0° relief angle, provides a secure clamping situation and robust cutting edge support. The geometry is especially suitable for turning operations that demand rigidity and repeatable concentricity. A modest corner radius like 0.8 mm helps to deliver improved surface finish without sacrificing edge strength, making the insert well suited for both semi-finishing and finishing passes in steel. This design reduces vibration and supports dimensional stability on conventional and CNC lathes. For tailored recommendations on machining parameters and to secure supply of Walter Tools inserts, contact Metav Werkzeuge for application support and ordering assistance Technical data SKU: WNMG080408-RP5-WPP20G-WALTER Designation: WNMG080408-RP5 WPP20G Product type: turning insert (drehwendeschneidplatte) Grade: WPP20G Series: Tiger·tec Gold Core specifications Insert form: Trigon 80° Size: 08 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Design and features Chipbreaker: RP5 Execution: G Material application: steel (ISO P) Coating: Tiger·tec Gold (coated carbide) Suitable for versatile steel turning tasks Stable chip formation and good wear resistance FAQ What materials is this insert suitable for? The WNMG080408-RP5 WPP20G is designed primarily for steel (ISO P) applications; the WPP20G grade is optimised for the thermal and metallurgical behaviour typical of steel machining. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP20G grade improves thermal resistance and wear performance, enabling longer tool life and more consistent cutting performance when turning steel. Which operations suit the Trigon 80° geometry? Trigon 80° inserts are ideal where secure clamping and rigidity are required; the geometry suits both semi-finishing and finishing turning passes that demand dimensional stability. What advantage does the RP5 chipbreaker provide? The RP5 chipbreaker promotes controlled chip formation in steel cutting, reducing the risk of entangling chips and helping to maintain surface quality and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the listed manufacturer.
WNMG080408-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
WNMG080408-RP5 WPP30G Drehwendeschneidplatte von Walter Tools Die WNMG080408-RP5 WPP30G ist eine Wendeschneidplatte für produktive Serienzerspanung von Stahl und bietet hohe Standzeit dank Tiger·tec Gold Beschichtung. Wendeschneidplatte WNMG080408-RP5 WPP30G von Walter Tools Tiger·tec Gold Beschichtung für hohe Standzeit RP5 Spanformer für kontrollierte Spanbildung Trigon 80° Form mit 0,8 mm Eckenradius Geeignet für die Zerspanung von Stahl Hohe Standzeit durch moderne Beschichtung Die Wendeschneidplatte nutzt die Tiger·tec Gold Technologie und die Sorte WPP30G, die als beschichtetes Hartmetall auf höchste Verschleißfestigkeit ausgelegt ist. Durch die optimierte Schichtaufbau ergibt sich eine verbesserte Wärmeableitung und damit längere Werkzeugstandzeiten, was die Rüstintervalle verlängert und die Produktionskosten pro Werkstück senkt. Dieser Vorteil ist besonders relevant für die wirtschaftliche Bearbeitung von unlegierten und legierten Stahl Werkstoffen. Präzise Spanbildung und Prozesssicherheit Mit dem RP5 Spanformer bietet die Platte eine stabile und reproduzierbare Spanform, die für gleichmäßigen Spanabfluss sorgt und Maschinenstillstände reduziert. Die Trigon 80° Plattenform kombiniert Steifigkeit mit guter Zugänglichkeit, während der Eckenradius 0,8 mm eine saubere Oberflächengüte unterstützt. Insgesamt ermöglicht die Kombination aus Form und Spanformer eine konstante Bearbeitungsqualität bei Serienprozessen. Einsatzbereich, Zielgruppe und Verarbeitungsnutzen Diese Wendeschneidplatte richtet sich an Anwender in der Serienzerspanung und im Lohnfertigungsbereich, die robuste, langlaufende Einsätze für Stahl benötigen. Die Ausführung G und die Toleranzklasse M sichern eine mittlere Maßhaltigkeit bei zuverlässiger Wiederholgenauigkeit. Anwender profitieren von geringerer Nacharbeit und planbaren Werkzeugkosten, insbesondere bei hohen Stückzahlen und kontinuierlichem Schichtbetrieb. Bei Fragen zur Applikation oder zur Schnittdatenwahl steht die technische Beratung gern zur Verfügung. Für produktive Serienzerspanung mit hoher Standzeit empfiehlt sich die Tiger·tec Gold Sorte WPP30G von Walter Tools; technische Rückfragen per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: WNMG080408-RP5-WPP30G-WALTER Marke: Walter Tools Bezeichnung: WNMG080408-RP5 Sorte: WPP30G Baureihe: Tiger-tec Gold Daten Eckenradius: 0,8 mm FreiWinkel: 0° (negativ) Plattengröße: 08 Plattendicke: 04 Plattenform: Trigon 80° Besonderheiten Schneidstoffsorte: WPP30G (beschichtetes Hartmetall, verschleißfest) Spanbrecher: RP5 (kontrollierte Spanbildung) Toleranzklasse: M (mittlere Toleranz) Ausführung: G Bearbeitbare Werkstoffe: Stahl (für typische Wärmeentwicklung und Spanbildung bei Stahl) FAQ Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Die Platte ist für die Zerspanung von Stahl ausgelegt; die Walter Tools Sorte WPP30G wurde speziell für typische Stahlwerkstoffe entwickelt und bietet robuste Spanbildung und hohe Standzeit. Für welchen Einsatz ist der RP5 Spanformer geeignet? Der RP5 Spanformer sorgt bei der WNMG080408-RP5 für kontrollierte Spanbildung und reduziert das Risiko von Spanverwicklungen, was besonders bei längeren Serienläufen vorteilhaft ist. Wie wirkt sich der Eckenradius von 0,8 mm auf die Werkstückoberfläche aus? Der Eckenradius 0,8 mm trägt zu einer verbesserten Oberflächengüte bei und reduziert die Notwendigkeit von Nachbearbeitung, ohne die Stabilität der Schneide zu beeinträchtigen. Worin besteht der Vorteil der Tiger·tec Gold Beschichtung? Tiger·tec Gold erhöht die Verschleißfestigkeit und Wärmebeständigkeit; Anwender berichten von längeren Standzeiten und konstanteren Ergebnissen bei der Bearbeitung von Stahl. Welche Toleranzklasse hat die Platte und was bedeutet das? Die Platte ist in der Toleranzklasse M eingestuft, was eine mittlere Maßhaltigkeit bedeutet und für viele Serienanwendungen ein ausgewogenes Verhältnis zwischen Präzision und Wirtschaftlichkeit bietet. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust RP7 chip control and a strong trigon geometry for steady productivity and reduced tool changes. Order the WNMG080408-RP7 WKP30S insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG080408-RP7 WKP30S turning insert – Walter Tools, Tiger·tec Silver, RP7 chipbreaker WNMG080408-RP7 WKP30S is a trigon 80° negative-indexable turning insert engineered for productive machining of steel and cast iron. Tiger·tec Silver coating for wear resistance Optimised RP7 chipbreaker for stable chips 80° trigon shape, negative 0° clearance Suitable for steel and cast iron machining Longer tool life and consistent performance with Tiger·tec Silver The WKP30S grade, realised in the Tiger·tec Silver family, combines a coated cemented carbide substrate with a surface technology tuned for machining of steel and cast iron. This results in improved wear resistance and a stable cutting edge under the thermal and mechanical loads typical for P and K group materials (ISO 513). The coating reduces flank wear and protects the substrate at elevated temperatures, which translates into fewer tool changes and a steadier production flow — a direct benefit for workshops prioritising uptime and predictable component quality. Stable chip formation and reliable geometry for fewer interruptions The RP7 chipbreaker is designed to produce controlled, short chips in a wide range of turning operations, easing swarf management and decreasing the risk of chip-related interruptions. Combined with the trigon 80° form and a corner radius of 0.8 mm, the geometry delivers a robust cutting edge that tolerates interrupted cuts and heavier engagement. The negative 0° clearance enhances insert strength and rigidity, making the insert particularly suitable where edge robustness and process reliability are decisive for cycle-time stability. Broad application scope and practical shop-floor advantages This indexable turning insert covers many common turning tasks across unalloyed and alloyed steels as well as cast irons, indicated by its material designation P / K. The versatile combination of grade, chipbreaker and plate form supports a balanced compromise between surface finish and edge life, making the insert a good fit for medium-duty turning where consistent component tolerances and repeatability matter. Procurement through Metav Werkzeuge ensures rapid access to the WNMG080408-RP7 WKP30S and application guidance to match the insert to cutting parameters and holder choices for each specific job. Brand pedigree and product authenticity Walter Tools is known for offering tools that combine industrial robustness with consistent manufacturing standards; this insert benefits from that tradition and the Tiger·tec Silver technology. The supplied item is an original factory-new Walter product and designed for professional metalworking environments seeking dependable tool life and stable cutting behaviour. Contact Metav Werkzeuge for tailored application advice and a supply recommendation for the WNMG080408-RP7 WKP30S turning insert Technical data SKU: WNMG080408-RP7-WKP30S-WALTER Article designation: WNMG080408-RP7 WKP30S Type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP30S Execution: G Core data Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: RP7 Suitable materials: Steel (P) / Cast iron (K) Plate shape: Trigon 80° Material designation: P / K FAQ What materials is this insert suitable for? The WNMG080408-RP7 WKP30S is formulated for machining steel and cast iron (material groups P and K according to ISO 513), offering a balance between edge life and chip control for those materials. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on this insert produces short, manageable chips and promotes consistent chip formation, which reduces interruptions and simplifies swarf handling during turning operations. What is the advantage of the 80° trigon form and negative 0° clearance? The trigon 80° shape provides positive seating and multiple usable cutting edges, while the negative 0° clearance increases insert strength and rigidity, improving resistance to edge chipping in heavier or interrupted cuts. What does the WKP30S grade indicate? WKP30S denotes a Walter coated carbide grade in the Tiger·tec Silver range, tuned for wear resistance and thermal stability when machining steels and cast irons. Is a 0.8 mm corner radius suitable for general turning? A corner radius of 0.8 mm offers a compromise between edge strength and surface finish, making it appropriate for general turning where moderate robustness and acceptable finish are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com