WNMG080408-MP3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of a hard-wearing coated carbide grade and a chipbreaker engineered for controlled chips to improve process stability and tool life; order genuine Walter Tools inserts via Metav Werkzeuge or consult the technical team for cutting-parameter recommendations. WNMG080408-MP3 WPP30G indexable turning insert by Walter Tools — Tiger‑tec Gold, MP3 chipbreaker A WNMG080408-MP3 WPP30G indexable turning insert designed for stable steel machining with Tiger‑tec Gold coating and a Trigon 80° form Tiger‑tec Gold coating for enhanced wear resistance Trigon 80° form for robust turning performance MP3 chipbreaker for reliable chip control 0.8 mm corner radius for consistent edge strength Greater productivity for steel machining The Tiger‑tec Gold coating combined with the WPP30G grade delivers a balanced performance profile for machining steel: wear resistance where temperatures rise and sufficient toughness where interruptions or varying material batches occur. This balance reduces flank wear and extends the usable life of the cutting edge, translating into longer tool cycles and fewer indexings. As the insert is a coated carbide type with a controlled coating architecture, the result is improved process stability under typical turning conditions encountered in job shops and series production. Stable cutting and predictable chips Built around the MP3 chipbreaker, the insert offers predictable chip formation and evacuation, which supports unattended machining and safer in‑process behaviour. The trigon 80° geometry contributes to a stable cutting stance on the workpiece, while the 0° negative rake helps to resist edge chipping when cutting harder sections or interrupted cuts. The 0.8 mm corner radius provides a compromise between edge strength and surface finish, making the insert suitable for a wide range of finishing and semi‑finishing passes without sacrificing component integrity. Practical fit and process advantages in production Specified as a WNMG‑type insert, this component fits toolholders designed for WNMG080408 inserts and suits standard turning applications on carbon and alloy steels. The grade’s designation and series imply a versatility that supports both small batch and larger production runs, reducing tooling complexity by using one grade across a broad steel portfolio. With concise tool selection and appropriate cutting data the insert helps to lower tooling costs per component and improves overall machine uptime — a rational choice for manufacturers seeking reproducible results and reduced process interruptions. Contact Metav Werkzeuge for tailored cutting data, availability of genuine Walter Tools inserts and practical application advice to integrate this insert into production operations Technical data SKU: WNMG080408-MP3-WPP30G-WALTER Designation: WNMG080408-MP3 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP30G Shape: Trigon 80° Facts Size: 08 Thickness: 04 Corner radius: 0.8 Rake angle: 0° (negative) Chipbreaker: MP3 Tolerance class: M Special features Coating/technology: Tiger‑tec Gold Material: coated carbide Application group: P (steel) Form: Trigon 80° Intended use: Turning — finishing and semi‑finishing applications FAQ Which materials is this insert intended for? The WNMG080408‑MP3 WPP30G insert is designed primarily for steel applications; the WPP30G grade and Tiger‑tec Gold technology are optimised for the thermal and chip‑forming behaviour typical of steel. What advantage does the MP3 chipbreaker provide? The MP3 chipbreaker on this insert promotes controlled chip formation and improved evacuation, which enhances process stability and reduces the risk of chip‑related interruptions when using the WNMG080408‑MP3 WPP30G from Walter Tools. What are the key geometry details of this insert? This indexable insert features a Trigon 80° form with a 0.8 mm corner radius and a 0° negative rake, combining edge strength with a stable tool posture for reliable turning operations. Can the insert be used in general turning toolholders? The designation WNMG080408 indicates compatibility with toolholders that accept WNMG080408 inserts; selection of the correct seat and clamping system is required for safe and accurate use. What production benefits can be expected from this grade and series? The WPP30G grade within the Tiger‑tec Gold series aims to deliver an economical balance of wear resistance and toughness for a wide range of steel components, contributing to fewer indexings, longer tool life and more consistent part quality. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG080408-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the MP5 chipbreaker and the robust Trigon 80° form for productive and predictable steel turning; order genuine Walter Tools inserts through Metav Werkzeuge or contact the consultants for tailored application support. WNMG080408-MP5 WPP05G turning insert — Trigon 80° geometry, Tiger·tec Gold by Walter Tools WNMG080408-MP5 WPP05G is a coated carbide turning insert designed for reliable steel machining in general turning applications, offering a balance of wear resistance and toughness in a compact, indexable format Tiger·tec Gold coating for wear resistance Optimised MP5 chipbreaker for steel machining Trigon 80° geometry for stable cutting 0.8 mm nose radius for repeatable finishes Higher productivity through coated-carbide wear control The insert’s Tiger·tec Gold coating and grade WPP05G combine to provide enhanced wear resistance and consistent edge life when machining steels. The coating reduces abrasive wear and thermal loading, which in turn maintains cutting performance over longer tool paths. The integrated MP5 chipbreaker is tuned for typical steel chip formation; it promotes controlled chip flow and reduces built-up edge, lowering the risk of unplanned stops and improving overall process efficiency. For production environments the result is fewer indexings and a steadier cycle time. Robust edge and geometry for stable turning The Trigon 80° configuration with a 0.8 mm nose profile and 0° negative relief gives a mechanically secure cutting edge that tolerates interruptions and variable cutting conditions. A trigon insert presents multiple cutting corners while the negative relief supports a stronger cutting edge, which is particularly valuable when facing intermittent cuts or rough sections. The tolerance class M ensures dimensional consistency between indexings, supporting predictable form tolerances and part repeatability in serial production. Seamless integration and consistent tool life As a standard WNMG-style indexable insert, the component is intended for straightforward mounting in compatible holders and indexable tool systems that accept the WNMG form. The insert’s coated carbide substrate and chipbreaker design help deliver reproducible results from one insert to the next, easing process setup and reducing the need for frequent adjustments. Consistency in performance contributes to lower overall tooling consumption and a more economical machining process across medium-to-high volume turning operations. Application guidance for best results in steel turning The grade is optimised for ISO group P (steel) applications and is suitable across a range of steel conditions where a compromise between wear resistance and toughness is required. For routine turning use moderate cutting speeds and feeds recommended for coated carbides in steel; the MP5 chip control and the insert’s geometry favour steady metal removal and good surface finish after indexing. When selecting cutting data, prioritise stable clamping and appropriate coolant or lubrication strategies to further extend tool life and safeguard part quality. Contact Metav Werkzeuge for application guidance and to source genuine Walter Tools Tiger·tec Gold inserts directly via Metav Werkzeuge; consultants are available to advise on toolholder compatibility and cutting data Technical Data Article number: WNMG080408-MP5-WPP05G-WALTER Product type: Drehwendeschneidplatte / turning insert Series: Tiger-tec Gold Grade: WPP05G Chipbreaker: MP5 Form: Trigon 80° Manufacturer: Walter Tools Numbers / Core technical data Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features / Versions Coating: Tiger·tec Gold (coated carbide) Substrate: coated carbide Application group: P (steel) Designation: WNMG080408-MP5 WPP05G FAQ What materials is this insert designed for? The insert is designed primarily for ISO group P applications; the WPP05G grade and Tiger·tec Gold coating are optimised for machining steel. What does WPP05G indicate? WPP05G denotes Walter Tools’ carbide grade in the Tiger·tec Gold family; it describes a coated carbide formulated for wear resistance and general-purpose steel turning. Is the Trigon 80° shape suitable for finishing and roughing? The Trigon 80° geometry with a 0.8 mm nose radius provides a robust edge for semi-finishing and general turning; for heavy roughing a larger radius or a dedicated roughing grade may be preferable. Can the insert handle interrupted cuts? Yes. The negative relief and strong edge form make the insert resilient to interruptions in the cut and variable workpiece conditions. How is chip control achieved on this insert? Chip control relies on the integrated MP5 chipbreaker, which is optimised for steel chip formation and supports controlled evacuation under typical turning parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metal cutting and is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. Mark names and protected designations are mentioned solely for explanation and comparison purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
WNMG080408-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a Trigon 80° geometry for reliable steel turning and sustained tool life; the MP5 chipbreaker improves chip control while the negative 0° relief adds robustness in heavy cuts. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. WNMG080408-MP5 WPP10G — Trigon 80° indexable turning insert for steel, Tiger·tec Gold (Walter Tools) A WNMG080408-MP5 WPP10G indexable turning insert designed for heavy-duty and general steel turning, optimised for consistent chip formation and long tool life Tiger·tec Gold coating for extended life Trigon 80° geometry for robust cutting edge MP5 chipbreaker for controlled chip formation Negative 0° clearance for heavy interruptions High-performance grade for demanding steel turning The Walter grade WPP10G, part of the Tiger·tec Gold series, is a coated carbide cutting grade developed for turning steel (ISO P). Its microstructure and surface finish deliver wear resistance and a balanced toughness distribution (10 wear‑resistant / 20 universal / 30–35 tougher), which translates into longer tool life and fewer index changes in batch and single‑part production. For decision makers seeking predictable tool cycles, this grade reduces unplanned downtime and supports stable machining outputs. Geometry and chip control that protect the process The Trigon 80° insert shape combined with the MP5 chipbreaker provides a dependable solution for both longitudinal turning and facing operations. The insert’s 0° (negative) clearance and robust corner design resist edge chipping under interrupted cuts or unstable clamping, while the chipbreaker stabilises swarf formation to prevent tangling and heat build‑up. These features improve surface quality and machining reliability, reducing rework and increasing first‑pass yield. Consistent productivity and easy integration into production Designed for industrial use, this indexable insert supports standard tool holders and is supplied in the common WNMG format, enabling fast tool changes and inventory standardisation. The combination of the Tiger·tec Gold coating and the MP5 geometry offers process security and a good compromise between tool life and cutting performance, especially when machining a range of unalloyed and alloyed steels. When paired with appropriate cutting data, the insert contributes to reproducible cycle times and predictable tool‑change intervals, helping to streamline production planning. Contact Metav Werkzeuge for application advice and availability of Walter Tools Tiger·tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: WNMG080408-MP5-WPP10G-WALTER Designation: WNMG080408-MP5 WPP10G Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Numbers / Core Technical Data Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features / Versions Shape: Trigon 80° Chipbreaker: MP5 Coating/Grade: Tiger·tec Gold (coated carbide) Application group: Steel (ISO P) Execution: G FAQ What materials is this insert intended for? The WNMG080408-MP5 WPP10G insert is specified for machining steel (ISO P); the WPP10G grade is tuned for the heat and chip behaviour typical of steel turning. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools grade increases wear resistance and thermal stability, extending the insert life and supporting consistent cycle times in steel applications. Which chipbreaker is fitted and what is its effect? This insert uses the MP5 chipbreaker, which stabilises chip formation and helps avoid long, stringy swarf, improving safety and surface finish in many turning operations. Is the insert suitable for interrupted cuts? Yes, the Trigon 80° shape with a negative 0° clearance offers a robust cutting edge that tolerates interruptions better than fragile positive geometries. Can this insert be used with standard WNMG tool holders? The WNMG form is compatible with common WNMG tool holders, allowing straightforward integration and fast index changes. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; info@metav-werkzeuge.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Combining robust chip control, broad suitability for steel and the long life of a Tiger‑tec Gold grade, this insert supports stable, productive turning across general steel applications; benefit from reliable edge security and consistent surface finish. Order the WNMG080408-MP5 WPP20G turning insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG080408-MP5 WPP20G turning insert — Tiger‑tec Gold grade for steel (Walter Tools) The WNMG080408-MP5 WPP20G is a Trigon 80° indexable turning insert intended for general steel machining, combining a coated carbide grade with an MP5 chipbreaker for controlled chip formation. Tiger‑tec Gold coated carbide for durability MP5 chipbreaker for consistent chip control Trigon 80° geometry for stable cutting Suitable for ISO P steel machining High-productivity cutting with predictable results The combination of Tiger‑tec Gold coating and the WPP20G grade delivers a balance between wear resistance and toughness that promotes longer tool life and stable cutting under typical steel cutting conditions. The coated carbide composition is optimised for the heat and chip types produced when machining unalloyed and alloyed steel (ISO P), which reduces downtime for tool changes and supports more consistent cycle times on production runs. This results in reliable dimensional repeatability and improved process stability on parts requiring repeatable quality. Controlled chips for safer, cleaner turning cycles The MP5 chipbreaker was developed to produce short, manageable chips in a wide range of turning parameters, reducing the risk of entanglement and minimising secondary operations for chip handling. For shops prioritising uninterrupted throughput, the insert’s chip control contributes directly to operator safety and machine uptime. The trigon insert form also supports effective cutting engagement, lowering the chance of sudden chip evacuation issues and smoothing the overall machining process. Geometry that supports surface quality and accuracy With a Trigon 80° insert form and a corner radius of 0.8, this insert gives a good compromise between edge strength and the ability to achieve fine surface finishes. The relatively neutral rake (0° negative clearance) improves edge security for heavier cuts, while the insert shape helps maintain consistent contact with the workpiece, which supports dimensional stability and repeatable finishes on turned components. These geometric features make the grade suitable for a variety of finishing and semi-finishing tasks in steel machining. Practical choice for everyday workshop use Designed as a general-purpose turning solution, this insert covers many common steel machining scenarios without the need for frequent tool changes. The coded size and thickness facilitate straightforward toolholder selection and inventory management. As a coated, grade-stable insert, it is a practical selection for job shops and production environments looking to standardise on a versatile turning grade that balances cost-efficiency with dependable performance. Specification-led selection for process planning When planning cutting parameters, treat the coated carbide grade as optimised for steel cutting and select feeds and speeds according to workpiece material and rigidity of the setup. The insert’s proven behaviour in steel (ISO P) allows engineers to focus on optimising cutting data rather than accommodating unpredictable tool wear. For applications requiring higher toughness or specific alloys, consider grade selection accordingly, but for broad steel machining the balance of wear resistance and edge stability makes this insert a strong baseline option. For application advice or to secure supply of Walter Tools Tiger‑tec Gold inserts such as the WNMG080408-MP5 WPP20G, contact Metav Werkzeuge for tailored recommendations and stocking information — eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical Data Article number: WNMG080408-MP5-WPP20G-WALTER SKU: WNMG080408-MP5-WPP20G Designation: WNMG080408-MP5 WPP20G Facts Plate size: 08 Plate thickness: 04 Corner radius: 0,8 Relief angle: 0° (negativ) Form: Trigon 80° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP5 Application group: P (steel) Execution: G FAQ What steels is this insert suitable for? The WNMG080408-MP5 WPP20G turning insert is designed for ISO P steels, covering unalloyed and alloyed steel grades typically encountered in general turning. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, which extends the effective tool life of the insert under demanding steel cutting conditions. Which chipbreaker should be selected for reliable chips? The integrated MP5 chipbreaker of this insert provides short, controllable chips across a wide range of feeds and speeds for safer and cleaner turning operations. Is this insert suitable for heavy roughing cuts? With a 0° negative relief and a 0.8 corner radius, the insert offers good edge strength and is suitable for many semi-finishing and roughing tasks in steel, though cutting data should be adapted to the machine and setup rigidity. Can this insert be used in automated production environments? Yes, the WPP20G grade’s balanced wear resistance and toughness supports predictable performance, making it suitable for automated and high-volume turning where repeatability is essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG080408-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP5 chipbreaker for consistent performance when machining steel; benefit from the stable Trigon 80° form and 0.8 mm corner radius for reliable surface finish and tool life. Order directly via Metav Werkzeuge or ask their consultants for application-specific advice. WNMG080408-MP5 WPP30G – indexable turning insert for steel (Walter Tools) The WNMG080408-MP5 WPP30G is a Trigon 80° indexable turning insert designed for high-productivity steel machining in ISO P applications Tiger·tec Gold coating for wear resistance MP5 chipbreaker for reproducible chip control Trigon 80° geometry for stable turning 0.8 mm corner radius, 0° negative rake Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WPP30G grade provides a robust, coated carbide solution that reduces flank wear and thermal damage during continuous and interrupted cuts. The coating technology is optimised for the heat and typical chip formation encountered when machining steel (ISO P), so cycle times remain predictable and inserts deliver a consistent lifetime under comparable cutting conditions. As a result, tool change frequency decreases, contributing directly to lower process costs and less downtime on the shop floor. Geometry that improves stability and surface quality The Trigon 80° insert form with a 0.8 mm corner radius and 0° negative rake offers a stable cutting edge suitable for general turning operations where rigidity and repeatability are priorities. The insert geometry reduces chatter susceptibility in medium-duty turning and supports better workpiece surface finish with conservative feed rates. The relatively small corner radius allows for accurate profile work while the 80° point angle increases the axial rigidity of the cutting zone, making the insert a pragmatic choice for batch and serial production. Controlled chip formation for dependable machining An MP5 chipbreaker specifically tuned for this insert family ensures predictable chip segmentation and evacuation when cutting unalloyed and alloyed steels. Controlled chips lower the risk of surface damage and tool interference, particularly in semi-finish and finishing passes. The reproducible chip behaviour supported by the chipbreaker contributes to higher process security and makes parameter optimisation faster during trial cuts, which is beneficial when integrating the insert into machining cycles that demand repeatable outcomes. Practical suitability and application guidance This insert is intended for machining operations classified under ISO P (steel). The coated carbide composition delivers a balance between wear resistance and toughness, which is useful across a range of steels from general structural grades to medium-alloy materials. For best results, pair the insert with appropriate tool‑holder geometries and cutting parameters recommended for Trigon inserts; start with conservative feeds and increase feed until the desired surface and cycle targets are met. If uncertain about specific cutting data or workpiece alloys, Metav Werkzeuge can advise on parameter windows and compatible toolholders. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools WNMG080408-MP5 WPP30G inserts Technical data Article number: WNMG080408-MP5-WPP30G-WALTER Label: Drehwendeschneidplatte WNMG080408-MP5 WPP30G Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert form: Trigon 80° Corner radius: 0.8 mm Rake: 0° (negative) Insert size code: 08 Thickness code: 04 Grade: WPP30G Chipbreaker: MP5 Tolerance class: M Special features Coating technology: Tiger·tec Gold Substrate: Coated cemented carbide Application group: ISO P (steel) Series designation: Tiger-tec Gold FAQ What materials is this insert suitable for? The Walter Tools WNMG080408-MP5 WPP30G is specified for ISO P materials, meaning it is designed primarily for machining various types of steel. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on the WPP30G grade improves wear resistance and thermal stability, which helps maintain cutting-edge integrity over longer production runs with Walter Tools inserts. What cutting tasks suit the Trigon 80° geometry best? The Trigon 80° form provides axial stability and is well suited to general turning operations where rigidity and surface finish consistency are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
WNMG080408-MP5 WPP30S Wendeplatten - Walter Tools
High wear resistance and reliable chip control combine to deliver consistent performance in steel turning; the Tiger·tec Silver grade and the MP5 chipformer support long tool life and stable cutting. Order this insert via Metav Werkzeuge or consult our specialists for application advice. WNMG080408-MP5 WPP30S turning insert (Trigon 80°, Tiger·tec Silver) — Walter Tools WNMG080408-MP5 WPP30S is a turning insert designed for robust steel machining applications, combining a Tiger·tec Silver coated grade with an MP5 chipformer for controlled chips and consistent surface quality. Tiger·tec Silver coated carbide grade WPP30S Trigon 80° insert with 0.8 mm corner radius Negative rake 0° suited for stable cutting Optimised chipformer MP5 for steel machining Consistent productivity through engineered coating and grade The Tiger·tec Silver coating paired with the WPP30S grade provides a balanced combination of wear resistance and toughness that suits a wide range of steels. This engineered coating reduces flank wear and improves edge stability under the thermal and mechanical loads typical for steel turning, which in turn extends effective tool life and reduces tool-change frequency. The result is a measurable improvement in process economy and repeatability for production and jobbing environments. Secure cutting geometry for demanding operations The Trigon 80° form with a 0.8 mm corner radius and a 0° (negative) rake angle delivers a stable cutting edge that tolerates interrupted cuts and heavier engagement. The geometry minimises vibration and supports consistent chip formation when combined with the MP5 chipbreaker, translating into reliable surface finish and predictable tool behaviour. The insert’s tolerance class M further ensures dimensional consistency across batches, aiding process control on high-volume and precision tasks. Practical design that eases machining and setup With the insert size code 08 and thickness code 04, the format matches common turning toolholders and clamping systems, simplifying inventory and changeover. The integrated MP5 chipformer is optimised for steel (ISO P), producing short, controllable chips that improve swarf evacuation and reduce machine downtime. This combination supports higher effective cutting times and a more efficient machining cycle, contributing directly to throughput gains and lower unit costs. Application guidance and suitability for steels Designed primarily for machining steels (ISO group P), the insert performs across unalloyed and alloyed steels where balanced wear resistance and toughness are required. For best results, pair the insert with stable toolholding and appropriate coolant strategy; the insert’s properties favour medium to higher feed ranges where chip control and edge security are decisive. If specific cutting data are required for particular steel grades or operations, Metav Werkzeuge can supply tailored recommendations and process parameters. For application-specific advice and procurement of Walter Tools Tiger·tec Silver turning inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the best grade and geometry for the intended steel machining task Technical data SKU: WNMG080408-MP5-WPP30S-WALTER Article: WNMG080408-MP5 WPP30S turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Insert form: Trigon 80° Corner radius: 0.8 mm Free angle: 0° (negative) Size code: 08 Thickness code: 04 Grade: WPP30S Chipformer: MP5 Tolerance class: M Special features Coating technology: Tiger·tec Silver Material application: Steel (ISO P) Application focus: General turning, robust operations Wear-toughness balance for extended tool life FAQ What materials is this insert suitable for? The WNMG080408-MP5 WPP30S turning insert is engineered for steels (ISO group P), offering a balanced performance across unalloyed and alloyed steels. How does the Tiger·tec Silver coating benefit production runs? The Tiger·tec Silver coating on this grade improves wear resistance and edge life, which helps to maintain consistent component quality and reduces the frequency of insert changes during production. Is the MP5 chipformer suitable for continuous and interrupted cuts? Yes, the MP5 chipbreaker is optimised for controlled chips in steel turning and works well in both continuous and intermittent cutting conditions when combined with the Trigon 80° geometry. Can this insert be used in existing toolholders with standard clamping? The insert uses common size and thickness codes (08 / 04), making it compatible with standard turning toolholders designed for that format; verification of holder compatibility is recommended. Where to get cutting data for a specific steel grade? Metav Werkzeuge can provide tailored cutting parameters and process advice for the WNMG080408-MP5 WPP30S insert based on the specific steel grade and machining setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands referenced. The offered article is original, factory-new merchandise of the respective manufacturer.
WNMG080408-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold grade combined with an MS3 chipbreaker and Trigon 80° geometry delivers stable, productive steel machining. Benefit from consistent cutting performance and reliable tool life in ISO P applications — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080408-MS3 WPP20G — Trigon 80° turning insert, Tiger·tec Gold (Walter Tools) The WNMG080408-MS3 WPP20G is a trigon turning insert engineered for efficient steel machining, offering a Tiger·tec Gold coated carbide grade and an MS3 chipbreaker for controlled chip formation. Tiger·tec Gold coated carbide grade Optimised MS3 chipbreaker Trigon 80° geometry, 0.8 mm corner radius Suitable for steel machining (ISO P) Maximised productivity for steel turning The combination of the Tiger·tec Gold coating and the WPP20G grade is designed to reduce wear and extend cutting intervals when machining steel (ISO P). The coated hardmetal substrate balances hardness and toughness to tolerate the heat and abrasion typical of steel turning, which translates into fewer tool changes and more uninterrupted production time. Presented as a compact, trigon-shaped insert, the form factor supports stable cutting forces and reliable seating in common toolholders, contributing to consistent cycle times and improved process efficiency. Precise chip control and surface quality An MS3 chipbreaker is optimised to produce predictable chip shapes and to avoid long, stringy swarf that can disturb finishing passes. In practice, this results in better surface integrity and reduced secondary operations. The Trigon 80° geometry, together with a 0° (negative) rake angle, offers a robust cutting edge that resists chipping during interrupted cuts, while the 0.8 mm corner radius balances edge strength with the ability to achieve a smooth surface finish. These design choices make the insert well suited for a range of turning tasks where chip evacuation and surface quality are priorities. Consistent tool life and process security The insert’s construction and tolerance grading (class M) support repeatable performance in production environments. A stable cutting edge and controlled microgeometry of the coated grade help maintain dimensional accuracy over extended runs, reducing scrap rates and downtime. The plate execution and thickness contribute to rigidity at the cutting zone, which, together with the coating technology, provides reliable wear behaviour across varying steel grades. For shops seeking predictable results and fewer process interruptions, this insert offers a practical balance of durability and versatility. For tailored cutting recommendations and fast delivery of Walter Tools turning inserts, contact Metav Werkzeuge for application support and parts availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: WNMG080408-MS3-WPP20G-WALTER Designation: WNMG080408-MS3 WPP20G Product type: Turning insert Brand: Walter Tools Series: Tiger·tec Gold Core data Plate size: 08 Plate thickness: 04 Corner radius: 0.8 mm Geometry: Trigon 80° Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G Chipbreaker: MS3 Coating technology: Tiger·tec Gold Suitable for: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The WNMG080408-MS3 WPP20G is optimised for steel machining and classified for ISO P applications; the WPP20G grade and Tiger·tec Gold coating address the wear and heat conditions typical of steel turning. How does the MS3 chipbreaker affect performance? The MS3 chipbreaker promotes compact, controllable chips and improves swarf evacuation, which supports better surface finish and reduces the risk of chip-related interruptions when using the Walter Tools turning insert. What is the benefit of the Trigon 80° shape and 0.8 mm corner radius? The Trigon 80° form provides a robust cutting edge and multiple cutting corners per insert; a 0.8 mm corner radius increases edge strength for rougher passes while still allowing acceptable surface quality in finishing operations. Is the insert suitable for interrupted cuts or heavy-duty turning? Yes. The 0° negative rake and the insert geometry are designed to offer edge security under interrupted cuts and higher loading, delivering stable cutting performance and improved process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is part of the group of precision tool manufacturers and is named for explanatory purposes only. Protected trademarks and trade names remain the property of their respective owners. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
WNMG080408-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver series’ combination of a wear‑resistant coated carbide grade and a controlled 0.8 mm corner radius for reliable finishing of challenging alloys; the trigon geometry with negative 0° relief ensures stable cutting edges and predictable chip control. Order directly via Metav Werkzeuge or consult the team for process recommendations and availability. WNMG080408-MS3 WSM01 — Trigon 80° indexable insert, Tiger‑tec Silver (Walter Tools) WNMG080408-MS3 WSM01 is an indexable turning insert designed for demanding machining of heat‑resistant alloys and rostfreier Stahl, offering a balance of cutting‑edge stability and surface finish. Tiger‑tec Silver coated carbide grade For rostfreier Stahl and superalloys (ISO M, S) Trigon 80° insert with 0.8 mm corner radius Stable performance in difficult materials The Tiger‑tec Silver coating combined with the WSM01 grade provides enhanced wear resistance and consistent edge life when machining tough materials. The coated carbide composition reduces adhesion and edge build‑up, which is particularly valuable for machining rostfreier Stahl and nickel‑based superalloys where heat and work hardening can compromise tool life. This results in fewer index changes and more predictable cycle times, supporting a rational, cost‑effective production flow. Geometry that improves process reliability The trigon 80° shape and MS3 chipbreaker are engineered to direct chips reliably away from the cutting zone, reducing the risk of re‑cut and improving surface integrity. The 0.8 mm corner radius offers a compromise between edge strength and surface quality, allowing modest feed rates while maintaining a fine finish. The negative 0° relief angle provides a robust cutting edge for interrupted cuts or unstable setups, translating geometric design into measurable process stability. Practical benefits for workshop productivity This insert supports higher process security and easier process planning: the coating and grade combination promotes stable chip formation while the insert format simplifies toolholding choices. For workshops aiming to reduce setup variability and maximise machine uptime, the insert’s specification helps deliver repeatable results across batches. For guidance on optimal speeds, feeds and holder selection for WNMG080408-MS3 WSM01, in‑house technical advisors can assist in defining the most efficient machining window. Contact Metav Werkzeuge today to discuss machine‑specific recommendations and order the Walter Tools Tiger‑tec Silver inserts for improved throughput and repeatable accuracy. Technical Data Article number: WNMG080408-MS3-WSM01-WALTER Designation ISO: WNMG080408-MS3 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Facts Insert size: 08 Thickness: 04 Corner radius: 0.8 mm Relief angle (free angle): 0° (negative) Tolerance class: M Special features Chipbreaker: MS3 Plate form: Trigon 80° Coating / material: coated carbide (see series) Application groups: S / M Suitable for: rostfreier Stahl FAQ What materials is this insert best suited for? The WNMG080408-MS3 WSM01 insert is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), delivering improved edge life and chip control in these challenging materials. How does the MS3 chipbreaker affect performance? The MS3 chipbreaker promotes controlled chip formation and evacuation, which contributes to consistent surface quality and reduces the risk of chip recutting when machining tough alloys. Can this insert be used for roughing and finishing? With a 0.8 mm corner radius and trigon geometry, the insert suits light to medium finishing and certain roughing operations where a strong cutting edge and good surface integrity are required. Is the Tiger‑tec Silver coating beneficial for stainless steels? Yes, the Tiger‑tec Silver coating on the WSM01 grade enhances resistance to adhesion and thermal wear, which is particularly advantageous for rostfreier Stahl machining. Which toolholders are compatible with this insert format? The WNMG080408‑style geometry fits standard toolholders for trigon 80° inserts; for machine‑specific holder recommendations, consult process engineering to match clamping and clearance requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanation only. There is no affiliation between our company and the named brands. The offered item is original, brand‑new merchandise of the manufacturer.
WNMG080408-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from a combination of the Tiger·tec Silver coating and the WSM10S grade for stable cutting in stainless steel and heat‑resistant alloys; the Trigon 80° form and MS3 chipbreaker deliver predictable chip control and secure clamping. Order directly via Metav Werkzeuge or consult the specialists for tailored recommendations. WNMG080408-MS3 WSM10S indexable turning insert – Tiger·tec Silver for stainless steel and superalloys, Walter Tools A WNMG080408-MS3 WSM10S indexable turning insert designed for robust machining of stainless steel and heat‑resistant superalloys, combining a thermally resistant coating with a stable geometry for dependable production performance. Tiger·tec Silver coating for heat resistance Negative 0° rake for robust cutting engagement Trigon 80° form for secure clamping MS3 chipbreaker for controlled chips Precision and thermal stability for demanding materials The combination of the WSM10S grade and the Tiger·tec Silver coating targets the specific challenges of machining stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). The coated cemented carbide substrate provides improved resistance to thermal softening and wear, which in practice translates to longer intervals between index changes and reduced process variability. For production environments where consistent surface quality and predictable tool life matter, this composition supports stable cutting forces and safer machining of materials that tend to work‑harden or generate high cutting temperatures. Stable cutting edge and controlled chip flow for reliable cycles The negative 0° rake and Trigon 80° form yield a geometry optimised for secure insert seating and a robust cutting edge under interrupted or heavy engagement. The MS3 chipbreaker focuses chip formation for medium to long turning operations, reducing the risk of entanglement and improving evacuation in automated setups. The 0.8 mm corner radius balances edge strength with surface finish capability, allowing reliable roughing and semi‑finishing passes without sacrificing dimensional control. These design choices lower the probability of unexpected down‑time and support reproducible component quality. Application guidance and production advantages With the Trigon shape and the specified thickness and size designations, the insert suits conventional toolholders for stable clamping and repeatable indexability. The grade is recommended where heat resistance and edge stability are priorities rather than maximum metal removal rates; this makes it particularly suitable for finishing and controlled roughing of stainless steel and nickel‑based alloys. For shops seeking to raise process reliability, the geometry and coating together contribute to predictable tool behaviour and fewer unplanned tool changes. If additional cutting data or adaptation to specific machines is required, Metav Werkzeuge can provide application advice and cutting parameter recommendations. Contact Metav Werkzeuge for personalised machining advice on Walter Tools inserts and to discuss optimal parameters for stainless steel or superalloy applications via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: WNMG080408-MS3-WSM10S-WALTER Label: Drehwendeschneidplatte WNMG080408-MS3 WSM10S Walter Tools Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Size designation: 08 Thickness designation: 04 Special features Coating: Tiger·tec Silver Grade: WSM10S Chipbreaker: MS3 Shape: Trigon 80° Material suitability: S / M (superalloys / stainless steel) FAQ What materials is this insert intended for? The insert is specified for machining stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S); the WSM10S grade and Tiger·tec Silver coating support thermal stability for these materials. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker promotes predictable chip formation and evacuation, improving productivity and reducing the risk of chip‑related interruptions when turning stainless steel and similar alloys. Which toolholders are compatible with the Trigon 80° form? Standard toolholders designed for WNMG‑style Trigon 80° inserts are compatible; the geometry ensures secure clamping and repeatable indexing for production workflows using Walter Tools turning systems. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a compromise between a robust cutting edge for extended life and a good surface finish, suitable for both semi‑finishing and finishing passes in demanding materials. Is the grade suitable for roughing operations? The WSM10S grade excels where edge stability and heat resistance are priorities; it can be used for controlled roughing, though its strongest benefits are typically seen in finishing and reliable semi‑finishing of stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer Walter Tools.
WNMG080408-MS3 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the robust Trigon 80° geometry for reliable chip control and extended tool life when machining tough alloys; order the insert directly via Metav Werkzeuge or consult their specialists for application-specific advice. WNMG080408-MS3 WSM30S turning insert — Trigon 80°, 0.8 mm radius (Walter Tools) WNMG080408-MS3 WSM30S is a trigon turning insert designed for demanding turning tasks in stainless steels and heat-resistant alloys, combining a coated carbide grade with a dedicated chipbreaker for process stability Tiger·tec Silver coating, grade WSM30S Trigon 80° geometry for sturdy cutting MS3 chipbreaker for reliable chip control Suitable for stainless steels and superalloys High-temperature stability for consistent performance The Tiger·tec Silver coating combined with the WSM30S grade delivers enhanced heat resistance and wear protection, which stabilises the cutting edge during extended cycles. This coated carbide technology reduces flank wear and slows crater formation, resulting in longer tool life and fewer interruptions to production. For operations that generate elevated temperatures—such as machining stainless steels and superalloys—the thermal resilience of the grade supports predictable tool behaviour and consistent component tolerances. Geometry engineered for secure cutting and chip control The Trigon 80° shape and a corner radius of 0.8 mm provide a robust cutting edge capable of absorbing intermittent loads and heavier depths of cut. The negative 0° rake (designated negative) increases edge strength for roughing operations, while the MS3 chipbreaker is optimised to form manageable chips in materials that tend to produce long, stringy swarf. Together these design choices reduce the risk of built-up edge and improve surface finish stability, which supports higher material removal rates without compromising repeatability. Application advantages for difficult-to-machine alloys This indexable insert is intended for machining classes M and S according to ISO guidelines—specifically rostfreier Stahl (stainless steel) and heat-resistant superalloys and titanium where poor thermal conductivity and high cutting temperatures are typical. The combination of coating and chip control reduces thermal and mechanical stress at the cutting zone, which can translate into improved process reliability, fewer insert changes and reduced cycle-time variability on both conventional and CNC turning centres. Practical handling and integration into production The insert follows common WNMG seating and clamping standards and is suitable for toolholders configured for trigon 80° inserts, enabling straightforward integration into existing tool sets. The neutral to robust geometry supports a range of turning strategies from interrupted roughing to semi-finishing passes. For exact cutting data and holder compatibility, Metav Werkzeuge’s consultants can supply application sheets and cutting-parameter recommendations tailored to specific machine and workpiece combinations. For specific application advice or to procure Walter Tools Tiger·tec Silver WSM30S turning inserts, contact Metav Werkzeuge for tailored recommendations and availability Technical data Article number: WNMG080408-MS3-WSM30S-WALTER ISO designation: WNMG080408-MS3 WSM30S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Facts Insert shape: Trigon 80° Corner radius: 0.8 mm Free angle / rake: 0° (negative) Chipbreaker: MS3 Size: 08 Thickness: 04 Tolerance class: M Special features Coated carbide grade Suitable for stainless steels (M) and superalloys/titanium (S) Robust cutting edge for heavy cutting Optimised chip control for long chips and sticky materials FAQ What materials is this insert suitable for? The WNMG080408-MS3 WSM30S insert from Walter Tools is designed for stainless steels (ISO group M) and heat-resistant superalloys / titanium (ISO group S), providing thermal resistance and edge stability for such materials. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating enhances wear resistance and heat tolerance of the insert, which helps maintain cutting-edge integrity and extends tool life during prolonged turning operations. What role does the MS3 chipbreaker play? The MS3 chipbreaker is engineered to control chip formation in ductile, difficult-to-machine alloys, promoting short, manageable chips and reducing the risk of swarf entanglement or built-up edge. Is the Trigon 80° geometry suitable for roughing? Yes, the Trigon 80° form combined with a 0.8 mm corner radius and negative 0° rake provides the strength required for roughing and intermittent cuts while still allowing for stable semi-finishing passes. Can the insert be used with standard WNMG toolholders? The insert conforms to the WNMG seating standard and is compatible with toolholders designed for trigon WNMG inserts; verify holder clamping and clearance for optimal performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WNMG080408-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a MU5 chipbreaker to secure stable chip formation and consistent tool life when machining stainless steels; order or request advice from Metav Werkzeuge for seamless integration into production. WNMG080408‑MU5 WMP20G indexable turning insert for stainless steel, Tiger·tec Gold — Walter Tools The WNMG080408‑MU5 WMP20G is an indexable turning insert with Trigon 80° geometry, engineered for reliable machining of stainless steel under moderate to robust conditions. Tiger·tec Gold coated carbide grade WMP20G Optimised for stainless steel (ISO M) Trigon 80° geometry, 0.8 mm corner radius MU5 chipbreaker for stable chip formation Consistent cutting performance that raises throughput The Tiger·tec Gold grade WMP20G provides a balance between wear resistance and edge toughness, tailored for the demands of stainless steel turning. The combination of the coated carbide substrate and an optimised surface finish enables improved heat management and reduced tendency for built-up edge, which translates into fewer tool changes and higher machine uptime. This results in tangible production advantages: more consistent component quality and predictable machining cycles thanks to controlled flank wear and secure chip formation. Robust geometry that protects the cutting edge and reduces rework The Trigon 80° form with a corner radius of 0.8 mm and a negative rake of 0° is designed for stability during interrupted cuts and heavier feed conditions. A negative rake increases edge strength and supports repeatable performance in tougher turning operations, while the MU5 chipbreaker promotes short, manageable chips, lowering the risk of surface damage and machine downtime. These features together help to reduce rework rates and improve overall process reliability on demanding materials. Practical integration and application advice for the workshop As an indexable insert intended for ISO group M, this grade is suited to operations where secure chip control and edge life are priorities rather than ultra-high-speed finishing. Typical applications include medium-duty external turning and facing of austenitic and other stainless alloys. When introducing the insert into a tool system, select a compatible holder that supports the Trigon 80° form and verify clamping rigidity; modest increases in coolant or careful selection of cutting parameters often extend tool life. For tailored recommendations on cutting data or holder compatibility, expert consultation is available to facilitate efficient process adoption. For technical advice and ordering of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number (SKU): WNMG080408-MU5-WMP20G-WALTER Name: WNMG080408-MU5 WMP20G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Facts Corner radius: 0.8 mm Insert size code: 08 Thickness code: 04 Geometry: Trigon 80° Rake angle: 0° (negative) Special features Grade: WMP20G (Tiger·tec Gold coated carbide) Chipbreaker: MU5 Suitable for: stainless steel (ISO M) Application: moderate to robust machining conditions FAQ What materials is this insert suitable for? The WNMG080408‑MU5 WMP20G insert is formulated for machining stainless steel (ISO group M) and supports reliable chip control in these alloys. How does the MU5 chipbreaker benefit production? The MU5 chipbreaker on this insert promotes short, controlled chips and helps to avoid entanglement and surface damage, improving process stability during turning. What does the Tiger·tec Gold designation indicate? Tiger·tec Gold denotes a coated carbide technology that enhances wear resistance and thermal stability, offering longer life and consistent performance on stainless steels. Is the trigon geometry suitable for heavier cuts? Yes, the Trigon 80° shape combined with a negative rake provides increased edge strength and is well suited to interrupted cuts and more robust turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer.
WNMG080408-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the MU5 chipbreaker to secure stable chip formation and consistent performance in stainless steel turning; the robust 0.8 mm corner radius and trigon geometry deliver reliable edge strength and process security. Order directly via Metav Werkzeuge or contact the technical advisers for application support. WNMG080408-MU5 WMP20S — Trigon 80° turning insert for stainless steel, Tiger·tec Silver (Walter Tools) A WNMG080408-MU5 WMP20S trigon 80° turning insert engineered for secure, repeatable machining of stainless steels under medium to robust cutting conditions Tiger·tec Silver coated carbide Optimised MU5 chipbreaker 0.8 mm corner radius for strength Suited for stainless steel machining Increased process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating with the WMP20S grade offers enhanced wear resistance and thermal stability for machining stainless steel. Coated carbide reduces edge degradation and supports longer tool life compared with uncoated grades. For production environments where repeatability matters, the insert’s engineered surface treatment results in more consistent cutting forces and improved tool-change intervals, which in turn supports predictable machining cycles and reduced downtime. Stable chip control and robust geometry for heavy use The dedicated MU5 chipbreaker promotes reliable chip formation when facing the typical toughness and built-up-edge tendencies of stainless steels. Combined with the Trigon 80° form and a 0.8 mm corner radius, the geometry increases cutting-edge stability and resistance to chipping. The negative 0° (negative) relief contributes to a sturdy cutting edge that withstands interrupted cuts and heavier depths of cut, making the insert suitable for medium to more robust finishing and semi-finishing operations. Practical benefits for shop-floor applications Using a purpose-designed insert such as this reduces machining variability: the WMP20S grade is tuned for the thermal and adhesive behaviour of stainless materials, enabling safer chip evacuation and maintained surface quality. Because the insert is indexable and conforms to standard WNMG dimensions, it integrates smoothly into existing toolholders and turning systems, simplifying inventory management. The result is improved throughput and reduced tool-change frequency for batch and continuous processes. Quick assessment and reliable choice for stainless turning For workshops seeking a balance of durability and economy, this insert delivers measurable advantages: better edge life due to the coating, predictable chip behaviour via the chipbreaker design, and mechanical robustness from the trigon form and corner radius. When paired with a suitable holder and cutting data adapted for stainless steel, the insert supports consistent surface finishes and process security across repeated production cycles. For application advice or a tailored recommendation from Metav Werkzeuge, contact the specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and cutting parameters for specific stainless steel grades Technical data Article number: WNMG080408-MU5-WMP20S-WALTER Designation: WNMG080408-MU5 WMP20S Series: Tiger-tec Silver Core dimensions Size: 08 Thickness: 4.0 mm Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Features Coating: Tiger·tec Silver Grade: WMP20S Material: coated carbide Chipbreaker: MU5 Form: Trigon 80° Application: stainless steel machining Execution: G Manufacturer: Walter Tools FAQ Is this insert suitable for stainless steel? The WNMG080408-MU5 WMP20S insert from Walter Tools is specified for stainless steel and is designed to handle the material’s tendency to work-harden and form built-up edge under medium to robust conditions. What does the MU5 chipbreaker do? The MU5 chipbreaker on the Walter Tools insert promotes controlled chip formation and evacuation when turning stainless steels, improving process stability and reducing the risk of long, stringy chips. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating increases wear resistance and thermal stability of the cutting edge, which helps maintain tool life and consistent cutting performance in repetitive stainless-steel turning tasks. Why is the 0.8 mm corner radius relevant? A 0.8 mm corner radius strengthens the cutting edge and improves resistance to chipping, making the insert more tolerant of higher cutting forces and intermittent cutting conditions. Can this insert be used in existing WNMG toolholders? The insert follows standard WNMG designation and fits compatible toolholders for trigon inserts; toolholder selection and cutting parameters should be matched to the intended stainless-steel grade and operation. Die Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
WNMG080408-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
WNMG080408-MU5 WPP05G Drehwendeschneidplatte von Walter Tools Die WNMG080408-MU5 WPP05G ist eine universelle Drehwendeschneidplatte zur effizienten Zerspanung von Stahl und bietet eine Kombination aus Standzeit und Prozesssicherheit. Universeller Schneidstoff Tiger·tec Gold WPP05G Speziell für Stahlbearbeitung optimiert Trigon 80° Form für hohe Stabilität Eckenradius 0,8 mm für präzise Konturen MU5 Spanformer für kontrollierte Spanabfuhr Hohe Prozesssicherheit durch moderne Beschichtung Dank der Tiger·tec Gold Beschichtung handelt es sich um beschichtetes Hartmetall, das für robuste Schneidkanten und gesteigerte Verschleißfestigkeit sorgt. Anwender profitieren von längeren Einsatzintervallen und konstanter Schnittgüte, wodurch Rüst- und Stillstandzeiten reduziert werden. Die Sorte WPP05G ist auf die thermische Belastung und Spanbildung bei der Stahlbearbeitung abgestimmt und liefert wiederholbar zuverlässige Ergebnisse. Präzise Form und kontrollierte Spanbildung für stabile Bearbeitung Die Trigon 80° Plattenform kombiniert Stabilität mit guter Zugänglichkeit in engen Konturen. Der Eckenradius 0,8 mm ermöglicht saubere Kanten bei Innen- und Außenbearbeitung, während der MU5-Spanformer speziell für die Spanformung bei Stahl ausgelegt ist und eine konstante Spanabfuhr gewährleistet. Werkstätten und CNC-Bearbeiter erreichen so reproduzierbare Oberflächenqualitäten bei seriennaher Fertigung. Zielgerichteter Einsatz und Vorteile für den Fertigungsalltag Dieses Plattendesign richtet sich an Zerspanungsbetriebe, die eine wirtschaftliche und vielseitige Lösung für ISO-Gruppe P (Stahl) suchen. Die negative Frei winkelgeometrie von 0° unterstützt stabile Spanablöseprozesse bei wechselnden Schnittbedingungen. Durch die Kombination aus geometrischer Robustheit und moderner Hartmetallsortenwahl lässt sich die Produktivität nachhaltig steigern, ohne die Prozesssicherheit zu kompromittieren. Entscheiden Sie sich für die WPP05G Qualität von Walter Tools und erhöhen Sie die Effizienz Ihrer Drehprozesse – bei Fragen zur Anwendung erreichen Sie unsere Technikberatung per E‑Mail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: WNMG080408-MU5-WPP05G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Produkttyp: Drehwendeschneidplatte Bezeichnung: WNMG080408-MU5 Sorte: WPP05G Ausführung: G Toleranzklasse: M Plattenform: Trigon 80° Daten Plattengröße: 08 Plattendicke: 04 Eckenradius: 0,8 mm Freiwinkel: 0° (negativ) Winkel Form: 80° Besonderheiten Material: beschichtetes Hartmetall Spanformer: MU5 (universell für Stahl) Bearbeitbare Werkstoffe: Stahl (ISO P) Baureihe: Tiger·tec Gold Sortenkennzeichnung: WPP05G Toleranzklasse: M FAQ Was zeichnet die WPP05G-Sorte aus? Die Walter Tools Wendeschneidplatte mit Sorte WPP05G nutzt die Tiger·tec Gold Beschichtung und bietet dadurch erhöhte Verschleißfestigkeit sowie zuverlässige Schneidkanten für die Stahlbearbeitung. Für welche Werkstoffe ist die Platte geeignet? Die Drehwendeschneidplatte ist für die Bearbeitung von Stahl (ISO P) ausgelegt und optimiert für typische Schnittbedingungen bei unlegierten und legierten Stählen. Welche Vorteile bringt der MU5-Spanformer in der Praxis? Der MU5-Spanformer sorgt für kontrollierte Spanabfuhr bei Stahl, reduziert Spananhäufungen und unterstützt gleichbleibende Oberflächengüten in Serienprozessen. Wie beeinflusst die Trigon 80° Form die Stabilität? Die Trigon 80° Geometrie bietet hohe Kantentragfähigkeit bei gleichzeitig guter Zugänglichkeit in engen Konturen, was stabile Schnitte und längere Standzeiten fördert. Welche Rolle spielt der Eckenradius 0,8 mm? Der Eckenradius 0,8 mm ermöglicht präzise Konturen und glatte Übergänge, besonders vorteilhaft bei Innen- und Außenbearbeitung mit hohen Oberflächenanforderungen. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080408-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the WPP10G carbide grade and a purpose‑matched MU5 chipbreaker delivers efficient, repeatable steel turning with improved tool life and stable chip control — order via Metav Werkzeuge or consult their specialists for cutting‑data optimisation. WNMG080408‑MU5 WPP10G indexable turning insert — Trigon 80° for steel (Tiger‑tec Gold) by Walter Tools A WNMG080408‑MU5 WPP10G indexable turning insert engineered for robust steel machining with Trigon 80° geometry and an MU5 chipbreaker for consistent chip formation. Tiger‑tec Gold coated carbide grade WPP10G Trigon 80° geometry for stable engagement MU5 chipbreaker tailored for steel turning 0.8 mm corner radius; negative 0° rake High‑wear resistance and reliable metalcutting for steels The combination of the Tiger‑tec Gold coating and the WPP10G grade is designed to resist abrasive wear while maintaining edge stability under the thermal and mechanical loads typical of steel machining. The coated carbide composition promotes stable chip formation, reduces flank wear and enables longer tool life compared with uncoated grades. The integrated MU5 chipbreaker controls chip flow for uninterrupted machining and lowers downtime due to chip entangling, which translates directly into improved overall productivity on production lathes. Geometry that increases cutting stability and surface quality The Trigon 80° form provides a positive balance between edge strength and accessibility in radial engagement, making the insert suitable for a wide range of turning operations. A 0.8 mm corner radius enhances robustness at the cutting edge and helps achieve consistent dimensional accuracy, while the negative 0° rake contributes to chip control and a secure seating in negative‑style toolholders. Together these geometry choices reduce vibration and support a stable cutting process, so fewer reworks and better surface finishes are achievable in mixed production runs. Integration into process chains and measurable gains Designed for ISO group P materials, the insert supports standard steel turning cycles and is classified in tolerance M, making it suitable for repeatable setups. The insert form and chipbreaker facilitate straightforward parameter scaling: higher feeds for productive roughing and stable finish passes with controlled cutting forces. Emphasis on process security and predictable tool life helps planners calculate life‑cycle costs and increases throughput, while the compact specifications of the insert simplify inventory management for busy workshops. For application‑specific recommendations and cutting values, Metav Werkzeuge provides tailored support and data. Contact Metav Werkzeuge for cutting‑data recommendations and availability of Walter Tools Tiger‑tec Gold WNMG080408‑MU5 WPP10G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG080408-MU5-WPP10G-WALTER Designation: WNMG080408-MU5 WPP10G Manufacturer: Walter Tools Facts Size code: 08 Thickness code: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Geometry: Trigon 80° Chipbreaker: MU5 Tolerance class: M Special features Carbide grade: WPP10G (Tiger‑tec Gold coated) Intended material group: Steel (ISO P) Series: Tiger‑tec Gold Insert form: Trigon 80° Application: turning operations for steel FAQ What steels is this insert suitable for? The WNMG080408‑MU5 WPP10G insert is intended for ISO P materials; the WPP10G grade and Tiger‑tec Gold coating are tuned for unalloyed and alloyed steels with emphasis on wear resistance and reliable chip control. How does the MU5 chipbreaker influence performance? The MU5 chipbreaker promotes short, controlled chips during steel turning, enhancing machine uptime and reducing the risk of chip entanglement; this improves the efficiency of the cutting process with the Walter Tools insert. Can this insert be used for finishing passes? Yes—the Trigon 80° geometry combined with a 0.8 mm corner radius and the negative 0° rake supports both productive roughing and controlled finishing, provided cutting parameters are adjusted accordingly. What does the tolerance class M indicate for production? Tolerance class M denotes medium tolerance for dimensional repeatability, allowing consistent fits for typical turning fixtures and predictable interchangeability in serial production. Is the Tiger‑tec Gold coating beneficial for long production runs? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and heat management, which supports longer tool life and steadier performance during extended machining cycles. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080408-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and a MU5 chipbreaker for dependable steel machining; the Trigon 80° geometry with a 0.8 mm corner radius delivers stable cutting and consistent surface quality. Order or request technical advice via Metav Werkzeuge for an efficient production setup. WNMG080408-MU5 WPP20G turning insert by Walter Tools — Trigon 80°, MU5 chipbreaker The WNMG080408-MU5 WPP20G is an indexable turning insert engineered for ISO P (steel) applications, combining a Tiger·tec Gold coated carbide grade with a robust geometry for productive turning. Tiger·tec Gold coated carbide for steel Trigon 80° insert with 0.8 mm corner radius MU5 chipbreaker for reliable chip control 0° negative rake for robust turning operations Consistent performance through advanced coating technology The Tiger·tec Gold technology and the WPP20G grade provide a coated carbide substrate optimised for the typical heat and chip formation encountered when machining steel (ISO P). The coating reduces abrasive wear and maintains edge integrity, which translates into longer tool life and fewer indexings. In practical terms, this means reduced tool-change downtime and better predictability in batch production, supporting tighter process windows and more consistent part tolerances. Geometry designed to balance strength and surface quality The Trigon 80° form combined with a 0.8 mm corner radius and a 0° negative rake creates a geometry that enhances stability at the cutting edge. The large included angle of the Trigon shape distributes cutting forces, helping to protect the cutting edge under interrupted cuts or tougher workpiece conditions. As a result, the insert supports robust roughing as well as semi-finishing operations while maintaining good surface quality on turned components. Reliable chip control for uninterrupted productivity The MU5 chipbreaker is engineered to shape and evacuate swarf consistently in steel turning, reducing the risk of entanglement and machine stoppages. Good chip control contributes directly to process reliability on automated lathes and reduces manual intervention during production. Combined with the coating and geometry, the insert offers a predictable wear pattern, enabling planning of tool index intervals and supporting efficient production cycles with lower scrap rates. For technical recommendations on applying Walter Tools turning inserts with the Tiger·tec Gold grade in steel machining, contact Metav Werkzeuge for tailored advice and cutting data support. Technical data SKU: WNMG080408-MU5-WPP20G-WALTER Designation: WNMG080408-MU5 WPP20G Grade: WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Size: 08 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Trigon 80° insert form MU5 chipbreaker Coated carbide Suitable for steel (ISO P) FAQ What materials is this insert intended to machine? The WNMG080408-MU5 WPP20G insert from Walter Tools is designed primarily for steel (ISO P), with its coating and substrate tuned to the thermal and metallurgical characteristics of steels. What advantages does the Tiger·tec Gold grade deliver? Tiger·tec Gold on the WPP20G grade gives improved wear resistance and thermal stability, which helps to extend the life of the insert and deliver consistent results under typical steel turning conditions. How does the 0° negative rake affect cutting behaviour? A 0° negative rake increases edge strength and makes the insert more robust in heavy or interrupted cuts; it helps maintain a stable cutting edge but may raise cutting forces compared with positive rake geometries. What is the role of the MU5 chipbreaker? The MU5 chipbreaker on this turning insert is configured to control swarf formation and evacuation in steel machining, improving process reliability and reducing the likelihood of chip-related interruptions. How can the designation WNMG080408-MU5 be interpreted? The designation indicates a trigon 80° insert form (WNMG), a nominal size code (08), a thickness code (04), a corner radius of 0.8 mm, and the MU5 chipbreaker specification—the full SKU WNMG080408-MU5-WPP20G-WALTER identifies the coated grade and manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and comparison. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the respective manufacturer. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a globally recognised manufacturer of precision tools for metalworking and is part of the Sandvik Group.
WNMG080408-MU5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WSM20S grade to achieve stable chip formation and extended edge life when machining demanding materials; the robust MU5 chipformer and Trigon geometry deliver secure clamping and predictable performance. Order the insert via Metav Werkzeuge or consult the technical team for application-specific recommendations. WNMG080408-MU5 WSM20S — Trigon 80° indexable turning insert with Tiger·tec Silver (Walter Tools) A WNMG080408-MU5 WSM20S indexable turning insert optimised for reliable machining of stainless steels and heat‑resistant superalloys in demanding turning operations Tiger·tec Silver coating for heat resistance and wear control Optimised MU5 chipformer for stable chips Trigon 80° geometry for secure clamping 0.8 mm corner radius for robust edge protection Maximise productive cutting with a heat‑resistant grade The combination of the Tiger·tec Silver coating and the WSM20S grade provides a balance between thermal resistance and mechanical toughness, helping to maintain edge integrity during elevated cutting temperatures. This turning solution reduces the risk of built‑up edge when working with stainless steels, while the coated carbide substrate supports steady performance when cutting tough, heat‑resistant alloys. The result is improved tool life and fewer index changes, supporting higher component throughput and predictable cycle times. Predictable chip control and surface quality under load The MU5 chipformer is engineered to produce controlled chip segments in interrupted or continuous cuts, which reduces the likelihood of entanglement and eases chip evacuation. Controlled chip formation contributes directly to a consistent surface finish and reduces secondary operations. For parts where surface integrity matters, the pairing of the chipbreaker geometry and the coating technology yields repeatable results and helps maintain process stability in serial production. Geometry and edge robustness for secure operations The Trigon 80° insert form combined with a 0.8 mm corner radius gives a secure seating in the toolholder and a resistance to mechanical shock at entry and exit. The insert’s 0° negative rake promotes a strong cutting edge for heavier roughing passes and supports higher feed rates where required. Together, these geometric choices mean fewer unexpected interruptions and a robust response to varying workpiece conditions, particularly in clamping‑sensitive turning centres. Application range and handling advice for workshop integration Designed for the material groups S and M, this insert is suitable where heat‑resistant superalloys and stainless steels are predominant. Selection of cutting data should consider the coated carbide’s thermal benefits: higher cutting speeds are possible compared with uncoated grades, while feeds and depths should be adjusted to the component geometry and machine rigidity. Where uncertainty exists about parameter settings, Metav Werkzeuge’s consultants can recommend starting values tailored to the machine, material and required surface quality. Contact Metav Werkzeuge for tailored recommendations on using the Walter Tools WNMG080408-MU5 WSM20S insert in stainless steel and superalloy turning applications Technical data Article number: WNMG080408-MU5-WSM20S-WALTER Name: Drehwendeschneidplatte WNMG080408-MU5 WSM20S Walter Tools Manufacturer: Walter Tools Facts Size: 08 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Trigon 80° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipformer: MU5 Material group: S / M Suitable for: stainless steels, heat‑resistant superalloys Execution: G Insert designation: WNMG080408-MU5 FAQ What materials is this insert designed for? The WNMG080408-MU5 WSM20S insert is specified for material groups S and M and is particularly suitable for stainless steels and heat‑resistant superalloys. How does the Tiger·tec Silver coating affect cutting performance? The Tiger·tec Silver coating on the WSM20S grade improves thermal resistance and wear control, which helps to extend edge life and maintain consistent cutting performance under elevated temperatures. Which chipformer is used and what benefit does it bring? This insert features the MU5 chipformer, designed to produce predictable, segmented chips that aid evacuation and support a consistent surface finish in turning operations. Is the geometry suitable for heavy roughing? Yes; the Trigon 80° form combined with a 0.8 mm corner radius and 0° negative rake provides mechanical strength and stability suitable for heavier cuts where a robust edge is required. Can Metav Werkzeuge provide cutting data for specific applications? Metav Werkzeuge can advise on starting parameters for the WNMG080408-MU5 WSM20S based on machine, material and component geometry to ensure process reliability. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080408-MW5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a sturdy Trigon 80° geometry and the MW5 chipbreaker for reliable, economical cast iron turning; order this insert directly via Metav Werkzeuge or consult our advisers for application support. WNMG080408-MW5 WKK10S – Indexable turning insert, Trigon 80° (Tiger‑tec Silver) by Walter Tools The WNMG080408-MW5 WKK10S is an indexable insert designed for productive turning of cast iron components, offering a coated grade tuned for abrasive materials and secure performance in interrupted cuts Tiger‑tec Silver for high wear resistance Trigon 80° geometry for stable cutting MW5 chipbreaker optimised for cast iron Greater process reliability through specialised coating and grade The combination of Tiger‑tec Silver coating and the WKK10S grade delivers increased resistance to abrasive wear typical of cast iron machining. Coating technology reduces flank wear and helps maintain a consistent cutting edge under variable conditions, which translates directly into fewer tool changes and more stable production cycles. The dedicated MW5 chipbreaker controls the frequently short, brittle chips from cast materials, reducing the risk of chip packing and supporting uninterrupted machining for higher throughput. Stable cutting behaviour thanks to robust geometry and edge design A Trigon 80° insert form provides a rigid cutting face and positive engagement in heavy-duty operations, while the 0° (negative) relief improves edge strength for interrupted cuts and grooving. The 0.8 mm corner radius balances toughness with surface finish capability, making this design suitable when both durability and acceptable part quality are required. Tolerance class M indicates a consistent manufacturing precision that eases indexing and repeatability across series production, supporting predictable tool life and reproducible component accuracy. Tangible productivity benefits and straightforward integration Using an insert tailored to cast iron leads to measurable improvements: less unplanned downtime, steady surface quality and simplified tool management. The plate’s configuration and MW5 chip control reduce secondary operations related to chip handling, while the coated grade reduces the frequency of regrinds or replacements. For operations seeking dependable results with minimal process variation, this insert offers a balance of wear resistance, mechanical strength and practical chip breaking that supports efficient workflows and consistent output. For reliable cast iron turning with Walter Tools’ Tiger‑tec Silver technology, contact Metav Werkzeuge for tailored application advice and to place an order. Technical Data Article number: WNMG080408-MW5-WKK10S-WALTER Designation: WNMG080408-MW5 WKK10S Manufacturer: Walter Tools Facts Insert size: 08 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK10S (coated carbide) Chipbreaker: MW5 Shape: Trigon 80° Material suitability: cast iron FAQ What materials is this insert intended for? The WNMG080408-MW5 WKK10S is specifically formulated for machining cast iron, with the Tiger‑tec Silver coating and MW5 chipbreaker tuned to abrasive, brittle chip behaviour. How does the Trigon 80° shape affect cutting performance? The Trigon 80° geometry increases cutting-edge stiffness and stability, which supports heavy cuts and interrupted machining while maintaining consistent component tolerances. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius improves edge robustness for longer tool life while still producing acceptable surface finishes, balancing durability with part quality. Is the insert suited to interrupted cuts? Yes, the 0° (negative) relief and the sturdy insert form make it well suited to interrupted cuts and applications with variable engagement. Does the WKK10S grade require special coolant or cutting parameters? No special coolant is mandated by the grade itself; recommended cutting data should be selected based on the specific cast iron grade and machine capability for optimal tool life and chip control. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The brand Walter Tools is mentioned for identification and explanatory purposes only. There is no affiliation between our company and the named manufacturer; the offered article is an original, factory‑new product of the stated manufacturer.
WNMG080408-MW5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Silver coated carbide and the MW5 chipbreaker for consistent, productive cast‑iron turning; the Trigon 80° geometry with a 0.8 mm corner radius delivers stable edge life and reliable process security. Order the WNMG080408‑MW5 WKK20S directly via Metav Werkzeuge or ask our consultants if needed. WNMG080408-MW5 WKK20S indexable turning insert — Tiger·tec Silver coated, for cast iron (Walter Tools) The WNMG080408‑MW5 WKK20S is a Trigon 80° indexable turning insert engineered for efficient and repeatable machining of cast‑iron components in industrial turning operations. Tiger·tec Silver coated carbide grade WKK20S Trigon 80° geometry for stable cutting MW5 chipbreaker optimised for cast iron 0.8 mm corner radius for improved edge life Maximise uptime with abrasion‑resistant coating and a robust grade The combination of the Tiger·tec Silver coating and the WKK20S grade provides high resistance to abrasive wear typical of cast‑iron chips, which translates directly into longer tool life and fewer insert changes. The coated carbide construction ensures predictable performance under the fluctuating loads of series production, reducing unplanned stoppages and supporting a steady production flow. For operations that prioritise machining economy, the grade’s balance between durability and toughness makes it suitable for both roughing and finishing steps on grey and nodular cast iron. Consistent chip control for safer, higher‑quality turning The MW5 chipbreaker is tuned for the short, breaking chips that occur when machining cast iron, improving chip evacuation and reducing the risk of entanglement. Stable chip formation lowers cutting forces and vibration, which helps to maintain a consistent surface finish and reduces the likelihood of interrupted cuts. This improved chip management supports higher process reliability and can enable higher effective cutting speeds while maintaining component quality. Geometry and edge strength for stable, repeatable results The Trigon 80° insert form combined with a 0° (negative) relief geometry gives a low cutting‑edge exposure suited to demanding turning tasks, especially where interrupted cuts or heavy cross‑sections occur. The 0.8 mm corner radius increases edge stability and distributes cutting loads across a larger contact area, slowing flank wear and preserving dimensional accuracy over longer tool cycles. These geometric choices support repeatable component tolerances and reduce the need for frequent rework in high‑volume environments. Easy integration into standard toolholders and predictable inventory management This indexable insert follows standard WNMG conventions, allowing straightforward replacement in commonly used turning toolholders and simplifying tool inventory. The Walter Tools series consistency means predictable clamping and interchangeability across machining centres. For procurement and production planning, the combination of a universal geometry and a cast‑iron‑focused grade reduces the number of different items required, supporting leaner stockkeeping and faster changeovers on the shop floor. Ask Metav Werkzeuge for application advice on the Walter Tools WNMG080408‑MW5 WKK20S — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: WNMG080408-MW5-WKK20S-WALTER Article: WNMG080408-MW5 WKK20S Type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Core technical data Size: 08 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WKK20S (coated carbide) Chipbreaker: MW5 Plate form: Trigon 80° Application: cast iron machining FAQ What materials is this insert designed for? The WNMG080408‑MW5 WKK20S is optimised for cast iron applications; the WKK20S grade and MW5 chipbreaker provide controlled chip formation for grey and nodular cast iron. Is the insert suitable for roughing and finishing operations? Yes, the combination of the WKK20S grade and Trigon 80° geometry enables both roughing and finishing on cast‑iron components with predictable edge life. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker encourages short, breaking chips when machining cast iron, improving chip evacuation and reducing vibration for better surface quality. What does the 0.8 mm corner radius deliver in practice? A 0.8 mm corner radius increases edge robustness, reduces flank wear and supports dimensional stability during longer cutting cycles. Can this insert be used in standard WNMG toolholders? Yes, the insert follows standard WNMG conventions and integrates with commonly used turning toolholders for easy replacement and inventory management. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080408-MW5 WMP20G WMP20G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating combined with the WMP20G carbide grade and the MW5 chipbreaker delivers stable edge life and controlled chip formation; ideal for machining rostfreier Stahl in medium to robust conditions. Order the insert directly via Metav Werkzeuge or consult our technical advisors for the optimal tool choice. WNMG080408-MW5 WMP20G — Trigon 80° turning insert, Tiger·tec Gold for rostfreier Stahl | Walter Tools The WNMG080408-MW5 WMP20G is a negative‑rake Trigon 80° indexable insert engineered for secure cutting of rostfreier Stahl in medium to robust production environments. Tiger·tec Gold coating for high wear resistance Optimised MW5 chipbreaker for stable chips Trigon 80° form with 0.8 mm corner radius 0° negative rake for secure cutting performance Reliable performance with rostfreier Stahl The combination of the WMP20G grade and Tiger·tec Gold coating provides a balance of hardness and toughness tailored for machining rostfreier Stahl. This coated carbide grade reduces the tendency for built‑up edge and supports consistent tool life under fluctuating temperatures and cutting loads. For users who require repeatable results across batch runs, the insert’s engineered coating and substrate properties contribute to a predictable wear pattern and fewer unplanned tool changes, supporting leaner production cycles. Geometry designed to control chips and surface quality The Trigon 80° format and the MW5 chipbreaker work together to produce short, uniform chips and to protect the cutting edge. A 0.8 mm corner radius increases robustness at the cutting edge and helps maintain surface finish where light to moderate feed rates are applied. The 0° negative rake delivers secure engagement in tougher materials, improving stability when encountering variable workpiece conditions. These geometry choices reduce vibration and support a smoother machining process with fewer interruptions. Coated carbide for temperature and wear management As a coated carbide solution within the Tiger·tec family, the insert is engineered to manage heat generation and abrasive wear common to rostfreier Stahl machining. The multilayer coating enhances friction behaviour at the tool–chip interface and improves resistance to flank wear, which in turn preserves dimensional accuracy over longer tool life. Process managers seeking consistency will appreciate the improved edge integrity delivered by this specification, which supports reliable component tolerances and surface quality. Practical advantages for workshop productivity The insert’s design targets uptime and predictable performance: the MW5 chipformer fosters efficient chip evacuation while the Tiger·tec Gold technology helps to reduce frequency of tool changes. Tolerance class M underlines suitability for standard industrial tolerances in many turning applications. The trigonal format fits common WNMG toolholders, enabling straightforward integration into existing tool systems and quick index changes to maintain throughput. For specific applications or feed‑speed recommendations, technical consultation is available to align cutting data with the production context. Contact Metav Werkzeuge for application advice and to specify the Walter Tools WMP20G insert for rostfreier Stahl machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080408-MW5-WMP20G-WALTER Label: Drehwendeschneidplatte WNMG080408-MW5 WMP20G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Insert size: 08 Thickness: 04 Corner radius: 0.8 mm Geometry: Trigon 80° Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger-tec Gold Grade: WMP20G (coated carbide) Chipbreaker: MW5 Suitable for: rostfreier Stahl Execution: G FAQ Which materials is this insert suitable for? The WNMG080408-MW5 WMP20G insert is intended primarily for machining rostfreier Stahl, where the WMP20G grade and Tiger·tec Gold coating support stable chip control and wear resistance. What does the WMP20G grade offer? WMP20G is a Walter Tools coated carbide grade within the Tiger·tec Gold family, engineered to balance toughness and hardness for improved edge life when cutting rostfreier Stahl. How does the MW5 chipbreaker affect performance? The MW5 chipbreaker on this insert promotes short, manageable chips and consistent chip formation, which reduces the risk of entanglement and supports continuous machining operations. Is the Trigon 80° geometry compatible with standard toolholders? The Trigon 80° geometry conforms to WNMG‑style indexing and is compatible with holders designed for that insert form, enabling straightforward replacement and indexing. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases the insert’s edge strength and contributes to improved surface finish under appropriate feeds, helping to extend service life in medium to robust turning tasks. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
WNMG080408-MW5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the MW5 chipbreaker for reliable chip control and extended edge life; the Trigon 80° geometry with a 0.8 mm corner radius ensures secure engagement in turning operations on rostfreier Stahl. Order directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. WNMG080408-MW5 WMP20S Drehwendeschneidplatte — Trigon 80°, 0° negative rake (Walter Tools) WNMG080408-MW5 WMP20S is a trigonal indexable turning insert designed for robust performance when machining rostfreier Stahl in medium to heavy conditions Trigon 80° geometry for stable turning 0° negative rake for secure edge engagement 0.8 mm corner radius for chip strength Tiger·tec Silver coated, WMP20S grade Consistent machining performance for rostfreier Stahl The combination of the Tiger·tec Silver coating and the WMP20S grade provides a balanced solution for machining rostfreier Stahl where toughness and thermal loads are high. The coated carbide substrate delivers a coated carbide structure that reduces adhesive wear and supports a stable cutting edge under intermittent and continuous cuts. With the trigonal form and a 0° negative rake, the insert resists edge deformation and reduces the risk of built-up edge formation, which is critical when turning materials that tend to work-harden. This results in predictable process behaviour and reduced scrap rates during serial production. Controlled chip formation and improved tool life Equipped with the MW5 chipbreaker, the insert promotes controlled chip segmentation and evacuation at a wide range of cutting conditions. The chip geometry supports consistent chip flow even when feeds and depths vary, reducing manual intervention and downtime. The 0.8 mm corner radius increases the effective cutting edge thickness, improving resistance to mechanical overload and extending edge life. For workshops prioritising uptime and repeatability, these features combine to lower tooling change frequency and improve overall throughput. Geometry and handling benefits for turning operations The Trigon 80° shape provides secure seating and stable cutting forces, particularly advantageous for medium to heavy turning where axial engagement is significant. The 0° negative rake gives predictable cutting behaviour and simplifies insert choice across different applications, while the compact insert size supports fine step-downs and finishing passes without sacrificing robustness. The insert family’s standardised form factor eases toolholder stocking and replacement, helping maintain a lean tooling inventory. Application guidance and process advantages This insert is specified for machining rostfreier Stahl according to the WMP20S designation: a coated carbide grade optimised for the challenges of these materials. In practice, the insert delivers a compromise between wear resistance and toughness, making it suitable for customers seeking consistent surface quality and reliable tool life under mixed turning conditions. For setups requiring process stability and reduced operator adjustments, the combination of Tiger·tec Silver technology and the MW5 geometry offers measurable improvements in production consistency and component finish. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and for assistance matching the WNMG080408-MW5 WMP20S to specific rostfreier Stahl operations Technical data Article number: WNMG080408-MW5-WMP20S-WALTER Designation: WNMG080408-MW5 WMP20S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Insert form: Trigon 80° Insert size: 08 Thickness: 04 Special features Grade: WMP20S Series: Tiger·tec Silver Chipbreaker: MW5 Coated carbide (beschichtetes Hartmetall) Suitable for rostfreier Stahl FAQ What materials is this insert designed for? The WNMG080408-MW5 WMP20S from Walter Tools is specified for machining rostfreier Stahl and is formulated for medium to robust cutting conditions. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on this insert supports controlled chip formation and evacuation, improving process stability and reducing the likelihood of chip-related interruptions during turning. Can this insert be used for finishing passes? Yes, the Trigon 80° geometry combined with a 0.8 mm corner radius and the WMP20S grade allows the insert to be used for both medium turning and finish passes where consistent surface quality is required. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
WNMG080408-MW5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, a robust Trigon 80° geometry, and a proven WPP05G carbide grade for reliable, cost-effective turning of Stahl; order via Metav Werkzeuge or consult our specialists for process optimisation. WNMG080408-MW5 WPP05G turning insert — robust Tiger·tec Gold grade for Stahl The WNMG080408-MW5 WPP05G is a trigon turning insert designed for stable machining of Stahl, featuring a Tiger·tec Gold coated carbide grade and an MW5 chipbreaker for predictable chip control. Tiger·tec Gold coated carbide grade WPP05G Trigon 80° geometry for secure cutting 0.8 mm corner radius for durable edge MW5 chipbreaker for stable chip formation Increased productivity through optimised coating and substrate The combination of the Tiger·tec Gold coating with a coated carbide substrate provides a measurable improvement in wear resistance and edge stability when machining Stahl. The coating reduces flank and crater wear, which extends effective tool life and reduces the frequency of index changes; this leads to a more continuous production flow and fewer unplanned stops. The grade WPP05G is tailored to the thermal and chip-formation characteristics typical for machining Stahl, helping maintain a consistent surface finish and predictable tool performance under varying cutting conditions. Geometry engineered for secure engagement and repeatability The trigon form with its Trigon 80° cutting geometry and a 0.8 mm corner radius offers a robust edge that resists chipping during interrupted cuts and heavy engagement. The 0° (negative) relief angle provides a stable cutting seat and higher security in roughing operations, while the insert form supports reproducible seating in standard toolholders. These geometric choices translate into less vibration, fewer edge failures and reliable dimensional consistency across batches — advantages that matter in serial production and precision turning tasks. Chip control and process reliability for Stahl applications Equipped with an MW5 chipbreaker, the insert promotes controlled chip flow and reduces built-up edge formation when working with the P material group. The chipbreaker geometry assists in breaking long chips into manageable fragments, improving workplace safety and reducing manual chip handling. Since the grade is specified for Stahl machining, the insert is suitable across a wide spectrum of unalloyed and alloyed steels, offering a balance between wear resistance and toughness for general to demanding turning tasks. Practical benefits for workshop integration and changeover As an indexable turning solution, this insert supports rapid replacement and consistent re-seating, which lowers downtime compared with brazed or one-piece tools. The standardised form and the WNMG080408-MW5 WPP05G designation make tool management and reordering straightforward within existing tool cabinets. By reducing the frequency of complete tool replacements and enabling predictable performance, the investment returns through higher machine uptime and more stable process control. For ordering, technical clarification or to discuss optimal cutting parameters for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and supply options. Technical data SKU: WNMG080408-MW5-WPP05G-WALTER Label: Drehwendeschneidplatte WNMG080408-MW5 WPP05G Walter Tools Product type: Drehwendeschneidplatte Grade / Sort: WPP05G Series: Tiger·tec Gold Core parameters Relief angle: 0° (negative) Corner radius: 0.8 mm Insert size code: 08 Thickness code: 04 Shape: Trigon 80° Tolerance class: M Design & features Chipbreaker: MW5 Suitable for: Stahl (P group) Material code: P (carbide substrate) Base designation: WNMG080408-MW5 ISO designation: WNMG080408-MW5 WPP05G Manufacturer: Walter Tools FAQ What materials is this insert intended for? This insert is specified for machining Stahl; the WPP05G grade and Tiger·tec Gold technology are optimised for unalloyed and alloyed steels within the ISO P group. How does the Tiger·tec Gold coating benefit turning operations? The Tiger·tec Gold coating on the WPP05G grade increases wear resistance and edge life during Stahl turning, resulting in longer intervals between index changes and more consistent surface quality. Is the insert suitable for interrupted cuts and roughing? Yes — the Trigon 80° geometry, 0.8 mm corner radius and 0° negative relief give the insert high stability for interrupted cuts and heavier engagement. Which chipbreaker should be chosen for fine finishing? This particular insert comes with the MW5 chipbreaker, which supports reliable chip control in general turning; for fine finishing, consideration of specific chipbreaker variants and cutting parameters is advised. What is the exact product designation for reordering? Order using the ISO designation WNMG080408-MW5 WPP05G or the SKU WNMG080408-MW5-WPP05G-WALTER for clear identification. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Mention of brand names is for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is original, factory-new merchandise of the manufacturer.
WNMG080408-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the MW5 chipbreaker for consistent chip control and extended tool life; the combination of trigon geometry and a 0.8 mm corner radius ensures stable cutting in steel and a productive turning process. Order or request technical advice via Metav Werkzeuge for application‑specific recommendations. WNMG080408-MW5 WPP10G – Trigon 80° coated carbide turning insert by Walter Tools The WNMG080408-MW5 WPP10G is a negative‑rake trigon turning insert engineered for robust and economical machining of steels in general turning applications. Tiger‑tec Gold coating for extended tool life 80° trigon shape for stable cutting MW5 chipbreaker for controlled chips 0.8 mm corner radius for strength and reliability Durable wear resistance for consistent production The WNMG080408‑MW5 WPP10G combines a coated carbide substrate with Walter Tools’ Tiger‑tec Gold technology to deliver reliable performance in steel machining. The applied coating reduces flank and crater wear, which translates into longer productive tool life and fewer changeovers on the shop floor. For process planners this means improved component consistency and lower running costs per part, while operators benefit from fewer interruptions and predictable tool behaviour in serial production. Geometry and chip control that improve machining stability The 80° trigon form together with a 0° negative rake creates a robust cutting edge that resists deflection under heavy cut conditions. The MW5 chipbreaker is optimised for chip segmentation and evacuation when machining steels, producing short, controllable chips that ease handling and reduce secondary operations. The 0.8 mm corner radius increases edge strength for roughing steps without compromising the ability to achieve acceptable surface finishes in follow‑up passes. Optimised for ISO P (steel) applications and process reliability Designed for the ISO P material group, this insert grade WPP10G provides a balanced combination of wear resistance and toughness suitable for a wide range of steels. The grade is tuned to cope with the thermal and mechanical conditions typical when turning unalloyed and alloyed steels, supporting steady cutting parameters and repeatable results. Process engineers will value the predictable tool life curves, which assist in tooling cost calculations and cycle time planning. Easy integration and practical handling on the shop floor As an ISO WNMG insert, the component is compatible with standard negative clamping toolholders of the same geometry, enabling straightforward tool change and minimal setup time. The compact trigon shape offers versatility for roughing and semi‑finishing applications, while the coated carbide construction reduces the need for frequent dressing or regrinding. For further guidance on cutting data and holder selection, Metav Werkzeuge can provide tailored recommendations based on specific machine and part conditions. Contact Metav Werkzeuge for application advice and supply of Walter Tools Tiger‑tec Gold WNMG080408‑MW5 WPP10G inserts and receive cutting data optimised for steel turning Technical data Article number: WNMG080408-MW5-WPP10G-WALTER SKU: WNMG080408-MW5 WPP10G Product type: Drehwendeschneidplatte / turning insert Manufacturer: Walter Tools Facts Insert form: Trigon 80° Free cutting angle: 0° (negative) Corner radius: 0.8 mm Size designation: 08 Thickness designation: 04 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MW5 Material suitability: Steel (ISO P) Geometry family: WNMG (negative clamping) FAQ What materials is this insert suitable for? This insert is intended for the ISO P material group and is optimised for machining various steels using the WNMG080408‑MW5 WPP10G Walter Tools grade. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on the WNMG080408‑MW5 WPP10G promotes segmented, controllable chips in steel turning, improving evacuation and shop‑floor safety. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating increases wear resistance and thermal stability for the WPP10G grade, resulting in longer tool life and steadier performance during extended cutting cycles. Is the insert compatible with standard toolholders? Yes; the WNMG geometry fits standard negative‑clamp WNMG toolholders, allowing straightforward integration into existing turning setups. What role does the 0.8 mm corner radius play? A 0.8 mm corner radius gives the cutting edge higher mechanical strength for roughing and interrupted cuts while still permitting acceptable surface finish in subsequent passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners and are used here solely for descriptive purposes; there is no affiliation between our company and the mentioned brands.
WNMG080408-MW5 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MW5 chipbreaker together with a robust Trigon 80° geometry for productive, repeatable steel turning. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. WNMG080408-MW5 WPP20G Walter Tools – Indexable turning insert with Tiger·tec Gold coating and MW5 chipbreaker The WNMG080408-MW5 WPP20G is an indexable turning insert designed for machining steel in general turning applications, offering a balance of wear resistance and process stability. Tiger·tec Gold coating for consistent edge life Optimised MW5 chipbreaker for steel turning Trigon 80° geometry for cutting stability 0.8 mm corner radius with 0° negative clearance Faster, more consistent machining through coated carbide technology The combination of the Tiger·tec Gold coating and the WPP20G grade delivers measurable improvements in tool life and process reliability when cutting steels. The coated carbide substrate is engineered to withstand the typical temperatures and load cycles of steel turning, which translates into fewer insert changes and longer uninterrupted run times. This performance is particularly relevant in medium-duty production where consistent surface quality and predictable tool consumption are priorities. Reduced downtime thanks to optimised chip formation and stable geometry The MW5 chipbreaker, paired with the Trigon 80° format, promotes controllable chip formation and stable cutting forces, reducing the risk of interruptions from tangled or long chips. The 0° (negative) clearance increases robustness for interrupted cuts and tougher operations, allowing higher feed rates without sacrificing stability. Together these features support a smoother process window and reduced machine downtime for shops focused on throughput. Clear application guidance for reliable process planning Relevant technical markers are provided for planning: size 08, thickness 04, corner radius 0.8 mm, and tolerance class M. The insert is classified for ISO group P, meaning it is suitable for a wide range of unalloyed and alloyed steels where good wear resistance and stable chip control are required. Selection of this geometry and grade is appropriate for a mix of finishing and semi-finishing operations where a balance between edge life and surface finish is sought. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and determine the optimal WPP20G grade for a specific steel application; technical advice and ordering are available by email or phone via Metav Werkzeuge. Technical data SKU: WNMG080408-MW5-WPP20G-WALTER Label: Drehwendeschneidplatte WNMG080408-MW5 WPP20G Walter Tools Product type: Indexable turning insert (drehwendeschneidplatte) Brand: Walter Tools ISO designation: WNMG080408-MW5 WPP20G Facts Size: 08 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: MW5 Geometry: Trigon 80° Material group suitability: Steel (ISO P) Execution: G Series: Tiger-tec Gold FAQ What materials is this insert suited for? The WNMG080408-MW5 WPP20G from Walter Tools is designated for ISO group P, making it suitable for a wide range of unalloyed and alloyed steels typically encountered in general turning. How does the MW5 chipbreaker affect performance? The MW5 chipbreaker on this insert improves chip control during steel turning, promoting short, manageable chips and supporting stable cutting conditions for improved process reliability. Can the insert handle interrupted cuts? Yes, the Trigon 80° geometry combined with a 0° negative clearance and the robust WPP20G coating enhances resistance to shock loads, making the insert suitable for interrupted and heavier cuts in steel applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new factory goods of the manufacturer.
WNMG080408-NMS WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from a robust combination of long tool life, secure chip control and reliable performance when machining hard‑to‑cut alloys; the coated grade and proven geometry support stable production. Order the insert directly via Metav Werkzeuge or consult the technical team for application matching. WNMG080408-NMS WSM01 – Trigon 80° indexable turning insert, Tiger‑tec Silver (Walter Tools) The WNMG080408-NMS WSM01 is a negative‑rake, trigon‑form indexable insert designed for demanding turning of rostfreier Stahl and heat‑resistant superalloys in heavy‑duty and finishing operations Tiger‑tec Silver coating for consistent edge life WSM01 grade for rostfreie Stähle and superalloys Trigon 80° form with negative 0° rake NMS chipbreaker for stable chip control Enhanced process reliability for tough materials The combination of the WSM01 coated carbide grade and the Tiger‑tec Silver series is engineered for stable cutting when machining rostfreier Stahl and heat‑resistant alloys. The coated microstructure reduces flank wear and supports reproducible edge retention, which translates into fewer insert changes and longer uninterrupted machining cycles. By choosing a grade optimised for high thermal loads and poor heat conduction materials, shops gain measurable improvements in process stability and less scrap from built‑up edge phenomena. Geometry and chip control that improve surface quality The Trigon 80° outline and negative 0° rake create a secure cutting edge that resists fracturing under interrupted cuts and heavy radial engagement. The NMS chipbreaker promotes predictable chip formation and evacuation even during high feed passes, reducing the risk of chip entanglement and improving finish consistency. The corner radius 0.8 mm offers a balance between edge strength and achievable surface finish, making the insert suitable for both robust roughing and controlled finishing operations. Shop‑floor advantages and economical machining As an indexable insert, the unit simplifies tooling logistics: fewer toolholders are needed across parts with similar geometries, and the coated grade supports extended tool life for lower unit costs over time. The insert’s specification eases process setup and repeatability, supporting shorter downtime for tool changes and increased machine utilisation. The brand pedigree of Walter Tools complements the technical attributes, providing familiar reference geometry and compatibility with standard toolholders across turning centres. The WNMG080408‑NMS WSM01 demonstrates a pragmatic mix of durability and predictable performance for demanding production environments. Contact Metav Werkzeuge for tailored application advice and availability of the Walter Tools WNMG080408‑NMS WSM01, including recommendations for cutting data and holder selection Technical Data Article number: WNMG080408-NMS-WSM01-WALTER Product type: Indexable turning insert Designation: WNMG080408-NMS WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Insert size: 08 Plate thickness: 04 Free angle: 0° (negative) Plate form: Trigon 80° Tolerance class: M Special features Grade: WSM01 (coated carbide) Chipbreaker: NMS Material compatibility: S / M Suitable for: rostfreier Stahl, heat‑resistant superalloys Typical use: heavy‑duty turning, finishing FAQ What materials is this insert designed to machine? The WNMG080408‑NMS WSM01 is designed for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S) where thermal stability and controlled chip formation are required. How does the NMS chipbreaker affect performance? The NMS chipbreaker on the WNMG080408‑NMS WSM01 improves chip control and evacuation, supporting consistent surface finish and reduced risk of chip interference during medium to heavy cutting conditions. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases wear resistance and heat management on the cutting edge, which helps to extend tool life and maintain cutting performance when machining difficult alloys. Is this insert compatible with common toolholders? The trigon 80° form and standard WNMG designation ensure compatibility with standard toolholders designed for trigon inserts; holder selection should match the insert seat and clamping style for secure mounting. What cutting strategy is recommended for the WSM01 grade? Use the grade for operations with elevated temperatures and material stickiness where a coated carbide is preferable; moderate to lower cutting speeds with controlled feeds often yield the best balance between life and surface quality. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com