WNMG080408-RP7 WPP10G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating combined with the RP7 chipbreaker and a Trigon 80° form delivers reliable edge life and consistent chip control; order the WNMG080408-RP7 WPP10G turning insert directly via Metav Werkzeuge or ask the consultants for machining recommendations. WNMG080408-RP7 WPP10G Turning insert — Trigon 80° with RP7 chipbreaker | Walter Tools The WNMG080408-RP7 WPP10G is a Trigon 80° indexable turning insert engineered for steel machining, featuring the Tiger·tec Gold coated carbide grade and an RP7 chipbreaker for controlled chip formation Tiger·tec Gold coating for wear resistance RP7 chipbreaker for stable chip control Trigon 80° form for secure clamping Corner radius 0.8 mm for robust edge strength Increased process reliability through advanced coating The insert uses the Tiger·tec Gold coating technology on a coated carbide substrate to extend tool life and maintain cutting-edge integrity during continuous turning operations. This grade provides a balanced combination of wear resistance and toughness, which is particularly useful when machining steels (material group P). The coating reduces adhesive wear and improves thermal stability, resulting in fewer tool changes and more predictable performance in series production. Geometry and chip control that protect the cutting edge The Trigon 80° form and RP7 chipbreaker are designed to secure the insert in the toolholder and manage chip flow efficiently. The 0° negative rake contributes to a stable cutting action on medium to heavy cuts, while the corner radius 0.8 mm supports edge strength for interrupted cuts and improved tool life. Together these geometrical features promote consistent surface quality and reduce the risk of edge chipping during higher feed operations. Practical advantages for steel turning operations Selected for steel applications, the WPP10G grade offers a compromise between high wear resistance and sufficient toughness for variable cutting conditions. The insert is suited to workshops seeking repeatable results with minimal set-up changes: it delivers predictable wear behaviour and reliable performance across a wide range of unalloyed and alloyed steels. With its proven combination of substrate, coating and chipbreaker, the insert supports productive machining cycles and easier process standardisation. Contact Metav Werkzeuge for tailored machining advice and availability of Walter Tools WNMG080408-RP7 WPP10G; eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: WNMG080408-RP7-WPP10G-WALTER Designation: WNMG080408-RP7 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Numbers / Core technical data Geometry: Trigon 80° Rake angle: 0° (negative) Corner radius: 0.8 mm Thickness: 04 Size: 08 Tolerance class: M Designs / Special features Chipbreaker: RP7 Coated carbide cutting material Suitable material group: Steel (P) Balanced wear resistance and toughness FAQ What materials is this insert intended for? The WNMG080408-RP7 WPP10G is designed primarily for machining steels (material group P) and is optimised for the typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WNMG080408-RP7 WPP10G improves wear resistance and thermal stability, which supports longer tool life and more consistent cutting performance in steel turning. Which chip control behaviour can be expected from the RP7 chipbreaker? The RP7 chipbreaker provides controlled chip formation and evacuation for a wide range of cutting conditions, contributing to safer machining and consistent surface finish. Is the Trigon 80° form suitable for standard toolholders? The Trigon 80° geometry is compatible with toolholders designed for WNMG-style inserts and offers secure clamping for reliable repeatability during turning operations. What is the significance of the 0.8 mm corner radius? A corner radius of 0.8 mm increases edge stability, making the insert more robust under interrupted cuts and reducing the likelihood of edge chipping during tougher operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners and are used here for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer Walter Tools.
WNMG080408-RP7 WPP20G G Wendeplatten - Walter Tools
Combining Tiger‑tec Gold coated carbide with an optimised RP7 chipbreaker yields a reliable, universal solution for steel turning that maximises tool life and ensures consistent surface quality; the trigon 80° geometry and 0° negative rake further enhance stability in demanding cuts. Order the WNMG080408-RP7 WPP20G directly via Metav Werkzeuge or consult our specialists for tailored machining advice. WNMG080408-RP7 WPP20G — Trigon 80° indexable turning insert, Tiger‑tec Gold by Walter Tools The WNMG080408-RP7 WPP20G is a trigon, 80° turning insert intended for versatile steel machining where secure chip formation and extended edge life are required. Tiger‑tec Gold coated carbide Optimised RP7 chipbreaker 0° negative rake for stable cutting 0.8 mm corner radius for durable edge Consistent productivity through proven coating technology The Tiger‑tec Gold coating delivers a combination of hardness and oxidation resistance that is designed to extend tool life under the thermal loads typical of steel machining. Because coated carbide reduces flank wear and resists built-up edge, the result is fewer interruptions for insert changes and more predictable cycle times. This stability is particularly valuable in batch production and in setups where reproducible performance is a priority, as the insert's behaviour is easier to predict and integrate into machining process planning. Better chip control and surface quality with a tailored chipbreaker The RP7 chipbreaker is engineered to create short, manageable chips when machining steels in the ISO P range. Improved chip formation reduces the risk of chip entanglement and helps maintain tool clearance, which in turn supports a consistent surface finish and lowers the chance of part rework. For operators less familiar with chipbreaker design: the chip geometry actively controls chip curl and breakage, turning potentially hazardous long chips into compact segments that are easier to evacuate from the cutting zone. Geometry and edge preparation for robust turning performance The trigon 80° shape provides a positive combination of strength and accessibility to the cutting edge, while the 0.8 mm corner radius balances edge durability with the ability to produce acceptable radii on workpieces. The 0° negative rake configuration gives a stronger cutting edge for interrupted cuts and heavy roughing passes, promoting process reliability under higher mechanical loads. These geometric choices make the insert suitable for a wide range of steel grades as indicated by ISO P, delivering repeatable results across varied production tasks. Practical advantages for workshop integration Identification and handling are simplified by the standard WNMG designation and the clear grade marking WPP20G, enabling quick tool selection in toolrooms and automatic tool changers. The insert's coded dimensions and chipbreaker type align with common toolholder systems, minimising compatibility checks and speeding tool changes. If further process data or cutting parameters are required for integration into an existing workflow, Metav Werkzeuge’s application support can supply recommended speeds, feeds and edge treatment notes to suit the specific machine and workpiece material. Contact Metav Werkzeuge for application support and to request the Walter Tools WNMG080408-RP7 WPP20G insert for immediate delivery or process optimisation Technical data Article number: WNMG080408-RP7-WPP20G-WALTER Designation: WNMG080408-RP7 WPP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Core specifications Insert form: Trigon 80° Size code: 08 Thickness code: 04 Corner radius: 0.8 Relief / rake: 0° (negative) Chipbreaker: RP7 Grade / sort: WPP20G Tolerance class: M Materials & special features Coating: Tiger‑tec Gold (coated carbide) Material suitability: Steel (ISO P) Application focus: General turning, roughing to semi-finishing Performance attributes: Optimised chip control, high process reliability, good wear resistance FAQ What materials is this insert suitable for? The WNMG080408-RP7 WPP20G is formulated for machining steels (ISO P), with the Tiger‑tec Gold coating and RP7 chipbreaker optimised for typical steel heat and chip-forming behaviour. How does the RP7 chipbreaker improve machining? The RP7 chipbreaker on this Walter Tools insert produces compact chips that are easier to evacuate, reducing entanglement and improving surface consistency during turning operations. Is this geometry suitable for interrupted cuts or heavy roughing? Yes, the trigon 80° form with a 0° negative rake provides a robust cutting edge that enhances stability for interrupted cuts and heavier roughing passes. Can the insert be used for finishing operations? While primarily suited to roughing and semi-finishing, the 0.8 mm corner radius permits acceptable finishes; for high-precision finishing, finer radii or dedicated grades may be preferable. How is the grade WPP20G positioned in terms of wear and toughness? WPP20G, in Walter Tools' Tiger‑tec Gold family, offers a balanced combination of wear resistance and toughness tailored for reliable performance across a broad range of steel grades. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter Tools brand name and trademarks are the property of their respective owners. The offered article is original and brand-new. There is no connection between our company and the mentioned brand. Trademarks and registered names are used for product description and identification only.
WNMG080408-RP7 WPP30G RP7 Wendeplatten - Walter Tools
Take advantage of the reliably robust cutting performance and the Tiger·tec Gold coating to maintain production stability in steel turning operations; combine the strong edge geometry and RP7 chipbreaker for consistent chip control and fewer tool changes. Order the WNMG080408-RP7 WPP30G directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMG080408-RP7 WPP30G indexable turning insert (Trigon 80°, Tiger·tec Gold) — Walter Tools The WNMG080408-RP7 WPP30G is an indexable turning insert engineered for steel machining, offering a Tiger·tec Gold coated grade and a robust Trigon 80° geometry for general-purpose and medium-duty turning. Tiger·tec Gold coated grade WPP30G Trigon 80° insert geometry 0.8 mm corner radius for edge strength Suitable for steel (ISO P) machining High wear resistance and consistent life for steel turning The combination of the WPP30G grade and Tiger·tec Gold technology delivers enhanced wear resistance and improved thermal stability when machining steels (ISO P). The coated cemented carbide microstructure is optimised for the heat and chip conditions typical of steel turning, which supports stable chip formation and predictable tool life. This reliability reduces unplanned tool changes and stabilises cycle times in batch and continuous production. Geometry designed to secure cutting edges and surface quality The Trigon 80° form with a corner radius of 0.8 mm and negative rake (0°) provides a mechanically strong cutting edge that resists chipping during interrupted cuts and heavier feed conditions. The angular geometry contributes to vibration damping and consistent contact conditions, which can improve surface finish and extend edge life. Specifying this insert supports machining strategies where edge stability and repeatability are priorities. Process reliability and adaptable chip control Equipped with the RP7 chipbreaker, the insert supports reliable chip control across a range of steel grades, making it suitable for both finishing and more demanding semi‑finishing tasks. The tolerance class M assures dimensional consistency for repeatable clamping and predictable performance. Overall, the insert’s design reduces downtime associated with chip-related issues and simplifies process setup for mixed steel applications. For tailored advice on integrating Walter Tools turning inserts into existing tool families, contact Metav Werkzeuge — request application data or machining recommendations for the WNMG080408-RP7 WPP30G via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080408-RP7-WPP30G-WALTER Designation: WNMG080408-RP7 WPP30G Manufacturer: Walter Tools Product type: indexable turning insert Facts Insert geometry: Trigon 80° Corner radius: 0.8 mm Rake angle: 0° (negative) Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP7 Coated cemented carbide Application group: ISO P (steel) FAQ What steels is this insert suitable for? The WNMG080408-RP7 WPP30G is formulated for ISO P materials, covering unalloyed and alloyed steels where thermal load and typical steel chip formation occur. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold enhances wear resistance and thermal stability on the insert, which improves tool life and process consistency when turning steel with the Walter Tools insert. Is the RP7 chipbreaker appropriate for finishing operations? Yes, the RP7 chipbreaker is designed to provide controlled chip formation for both finishing and medium-depth cuts, contributing to stable surface quality. Why choose a negative rake (0°) geometry for this insert? A negative rake increases edge robustness and reduces the tendency to chip under interrupted cuts or heavy feeds, resulting in more predictable performance in demanding turning tasks. What does the tolerance class M indicate for this insert? Tolerance class M denotes standard dimensional consistency suitable for reliable clamping and repeatable positioning in toolholders and turret systems. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080412-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a stabilised FM5 chipbreaker and durable trigon geometry for reliable machining of demanding alloys; order the inserts through Metav Werkzeuge or request tailored application advice from our consultants. WNMG080412-FM5 WSM10S turning insert — Tiger‑tec Silver grade for rostfreier Stahl and superalloys (Walter Tools) WNMG080412-FM5 WSM10S is an indexable turning insert designed for turning of demanding, heat-resistant alloys and rostfreier Stahl with a trigon 80° form and a negative 0° rake angle Tiger‑tec Silver coated carbide Optimised FM5 chipbreaker For rostfreier Stahl and superalloys Trigon 80° insert, corner radius 1.2 mm Longer tool life when machining demanding alloys The Tiger‑tec Silver coating and the Walter grade WSM10S combine to deliver a coated carbide solution tailored to materials that generate heat and work-hardening tendencies. With the WNMG080412-FM5 WSM10S insert, the coated substrate supports a stable cutting edge and controlled wear, which reduces unscheduled tool changes and contributes to predictable process outputs. The thermally resistant coating also helps maintain edge integrity when cutting materials that conduct heat poorly, such as titanium alloys and other superalloys, improving productivity per cutting edge. Predictable chip control and improved surface finish The FM5 chipbreaker is engineered to produce short, consistent chips in a broad range of conditions, which lowers the risk of chip entanglement and protects the workpiece surface. The Trigon 80° geometry promotes a favourable contact angle between tool and material, supporting a good surface finish while offering robust corner strength. For machining rostfreier Stahl and similar materials, reliable chip formation minimises built-up edge and contributes directly to repeatable part quality and reduced rework. Easy integration into standard turning operations The insert’s negative 0° rake angle and the WNMG form allow straightforward use in many conventional toolholders intended for negative‑rake inserts. The clear size and thickness coding (08 / 04) and the tolerance class M simplify inventory and tool-change planning on the shop floor. Because the insert is designed for heavy‑duty contact and thermal loads, it is particularly suitable where secure clamping and stable tool set‑up are already part of the process, enabling a seamless fit into existing turning cycles without complex adaptation. Efficiency through fewer interventions and consistent results By combining a robust cutting edge with a chipbreaker tuned for difficult materials, this insert supports longer uninterrupted cutting periods and more consistent batch quality. The result is a measurable improvement in process efficiency: fewer tool replacements, less downtime and more predictable production throughput. For operations that require repeatable surface integrity and dimensional control in challenging materials, the insert offers both economic and technical benefits that justify selection on the grounds of performance rather than price alone. Contact Metav Werkzeuge for bespoke application advice and fast supply of Walter Tools WNMG080412-FM5 WSM10S inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific rostfreier Stahl or superalloy jobs Technical data SKU: WNMG080412-FM5-WSM10S-WALTER Designation: WNMG080412-FM5 ISO designation: WNMG080412-FM5 WSM10S Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Insert shape: Trigon 80° Grade / sort: WSM10S Chipbreaker: FM5 Corner radius: 1.2 mm Relief angle: 0° (negative) Size code: 08 Thickness code: 04 Tolerance class: M Materials and features Coating / technology: Tiger‑tec Silver (coated carbide) Suitable for rostfreier Stahl (M) and heat‑resistant superalloys / titanium (S) Application focus: machining of difficult‑to‑cut materials and, depending on geometry, rostfreier Stahl Designed for stable chip formation and extended edge life FAQ Which materials are recommended for this insert? This insert is designed for machining rostfreier Stahl and heat‑resistant superalloys (classification S and M); the WSM10S grade and Tiger‑tec Silver coating improve edge stability in these materials. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker promotes short, consistent chip forms, improving chip evacuation and surface finish when using the WNMG080412-FM5 WSM10S insert in turning operations. What is the significance of the 1.2 mm corner radius? A 1.2 mm corner radius provides a compromise between edge strength and finishing capability, increasing resistance to edge chipping while still allowing good surface integrity on demanding materials. Is the insert coated and why does that matter? Yes — the Tiger‑tec Silver coating on the carbide substrate enhances thermal resistance and reduces wear, extending effective cutting life when machining materials that generate heat. Can this insert be used in standard WNMG toolholders? The WNMG geometry and negative 0° rake angle are compatible with holders designed for negative‑rake WNMG inserts; correct clamping and seat conditions should be observed for safe use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise Trigon geometry and a proven FP5 chipbreaker for stable, productive steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080412-FP5 WPP10G indexable turning insert — Walter Tools (Tiger·tec Gold, Trigon 80°) WNMG080412-FP5 WPP10G is an indexable turning insert designed for productive steel machining with a Tiger·tec Gold coated grade for improved tool life. Tiger·tec Gold coating for long tool life Trigon 80° geometry for secure positioning Negative 0° rake for robust cutting Optimised FP5 chipbreaker for steel Proven wear resistance for demanding steel applications The coated carbide grade WPP10G utilises Tiger·tec Gold technology to deliver a balance of wear resistance and toughness specifically for ISO P materials. This grade is developed to cope with the typical thermal and mechanical loads encountered in steel turning, reducing flank wear and extending interval between indexings. The result is a more predictable tool life and fewer machine downtimes, which supports continuous production and tighter process control. Accurate form and seating for repeatable results The Trigon 80° insert form combined with a tolerance class M and a 1.2 mm nose radius provides dimensional stability and repeatable part finish in serial production. The 80° geometry offers secure clamping and straightforward seat location in compatible toolholders, enabling consistent cutting engagement and predictable cutting forces. Negative 0° rake design increases robustness during interrupted cuts and heavy engagement, contributing to reliable performance in unstable cutting conditions. Controlled chip formation for smoother cycles The FP5 chipbreaker is engineered for steel applications (ISO P), promoting controlled chip flow and favourable breakability across a range of cutting parameters. Effective chip control reduces the risk of entanglement, improves surface quality and lowers the likelihood of rework. For operators and process engineers, the chipforming behaviour simplifies coolant and cycle optimisation and helps maintain stable cutting temperatures for improved tool life. Integration into production workflows As an indexable turning insert, this component is suited to batch production and flexible turning cells where fast indexability and predictable wear behaviour are essential. The insert’s specifications—including the WPP10G coating class, FP5 chipbreaker and Trigon profile—make it appropriate for medium to heavy-duty turning of unalloyed and alloyed steels. Where process reliability and repeatable surface finish are priorities, this insert offers a pragmatic combination of durability and form stability. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools Tiger·tec Gold WPP10G inserts and to arrange a precise suitability assessment for current production needs — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: WNMG080412-FP5-WPP10G-WALTER Article designation: WNMG080412-FP5 WPP10G Product type: indexable turning insert (drehwendeschneidplatte) Series / grade: Tiger·tec Gold / WPP10G Facts Shape: Trigon 80° Size: 08 Nose radius: 1.2 mm Thickness: 04 Clearance / rake: 0° (negative) Chipbreaker: FP5 Tolerance class: M Execution: G Special features Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) Sort description: WPP10G — coated carbide, optimised for steel Stable chip formation and productive machining characteristics FAQ What materials is this insert suitable for? The answer: The WNMG080412-FP5 WPP10G insert is optimised for ISO P materials — primarily unalloyed and alloyed steel — and delivers stable chip formation and wear resistance for these applications. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, which improves tool life and reduces index changes in continuous machining operations. What advantages does the Trigon 80° form provide? Trigon 80° geometry ensures secure seating and predictable cutting engagement, supporting repeatable part quality and simplified toolholder alignment for serial turning. Is the FP5 chipbreaker suitable for variable cutting conditions? Yes, the FP5 chipbreaker is designed to promote consistent chip breakage and evacuation across a range of feeds and depths when machining steel, aiding process stability. Which tolerance class is specified and why does it matter? The insert is manufactured to tolerance class M, providing consistent dimensional accuracy that benefits repeatability and part tolerances in production turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product from the manufacturer Walter Tools.
WNMG080412-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, robust negative geometry, and Tiger‑tec Gold coated carbide for efficient steel turning operations; order via Metav Werkzeuge or consult the technical team for cutting data and availability. WNMG080412-FP5 WPP20G — Indexable Turning Insert, Tiger‑tec Gold, for Steel | Walter Tools The WNMG080412-FP5 WPP20G is a negative 80° trigon indexable insert in the Tiger‑tec Gold series, developed for productive turning of steel alloys with optimised chip control and extended tool life. Tiger‑tec Gold coated carbide grade Optimised for steel (ISO P) machining FP5 chipbreaker for controlled chips 80° trigon with 1.2 mm corner radius High-performance grade for steel machining and consistent results The Tiger‑tec Gold coated carbide grade delivers a balance of wear resistance and toughness specifically tuned for steel (P) applications, which is reflected in the insert’s microstructure and coating technology. This results in stable chip formation and reduced flank wear in continuous and interrupted cuts. For production environments that demand repeatable component quality, the coated grade reduces process variation and supports longer tool life, thereby improving machine uptime and throughput. Geometry and chip control that enhance productivity The 80° trigon form and 0° negative clearance geometry provide mechanical strength and secure edge support, which is advantageous for medium to heavy turning tasks. The FP5 chipbreaker is engineered to form short, controllable chips on a broad range of steel grades, improving evacuation and reducing the risk of surface damage. The 1.2 mm corner radius increases edge robustness for stable cutting conditions and contributes to a reliable surface finish, while the insert thickness and 08 size maintain a compact profile for versatile toolholder compatibility. Process security, handling and practical benefits on the shop floor Supplied in the Tiger‑tec Gold series and identified by the WPP20G grade, this insert offers process security through predictable wear behaviour and consistent cutting edge performance. The insert’s negative design supports clamping stability, making it suitable for automated and manual setups alike. Specification-driven performance reduces rework and inspection time, helping production teams meet tolerance and surface finish targets with fewer tool changes and lower overall tooling costs. For production-ready steel turning with Walter Tools’ Tiger‑tec Gold performance, contact Metav Werkzeuge to request cutting parameters, availability and tailored recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: WNMG080412-FP5-WPP20G-WALTER Designation: WNMG080412-FP5 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Plate form: Trigon 80° Corner radius: 1.2 mm Plate size: 08 Plate thickness: 04 Clearance angle: 0° (negative) Chipbreaker: FP5 Tolerance class: M Special features Coated carbide (Tiger‑tec Gold) Optimised for steel (ISO P) Stable chip formation Robust negative geometry Suitable for productive turning applications FAQ What materials is this insert designed for? The WNMG080412-FP5 WPP20G is optimised for steel (ISO P); the Tiger‑tec Gold coating and grade formulation are tuned for unalloyed and alloyed steels. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker produces short, controlled chips on steel, which improves evacuation and reduces the likelihood of surface damage during turning. What advantages does the 80° trigon shape provide? The 80° trigon form increases edge strength and rigidity, making the insert suitable for medium to heavy turning operations while maintaining a compact toolholder footprint. Is the WPP20G grade suitable for automated production? Yes. The WPP20G grade offers consistent wear characteristics and edge stability, supporting automated processes with minimal rework. Which aspects contribute most to tool life with this insert? The combination of the Tiger‑tec Gold coating, optimised microstructure and robust geometry of the insert supports reduced flank wear and extended tool life during steel machining. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product from the manufacturer (Walter Tools).
WNMG080412-FW5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the wear-resistant WKP01G grade for consistent edge life and predictable chip control in steel and cast iron turning. The combination of a Trigon 80° form, FW5 chipbreaker and a 1.2 mm corner radius ensures stable cutting and efficient material removal. Order directly via Metav Werkzeuge or consult our machining specialists for application-specific recommendations. WNMG080412-FW5 WKP01G — Indexable turning insert, Tiger·tec Gold for steel and cast iron — Walter Tools The WNMG080412-FW5 WKP01G is an 80° trigon indexable turning insert engineered for robust finishing and medium-depth roughing in steel and cast iron, delivering reproducible results in production environments. Tiger·tec Gold coated grade WKP01G Optimised FW5 chipbreaker Trigon 80° insert geometry Corner radius 1.2 mm for stable cutting Predictable chip control for productive turning The coated cutting grade of this insert ensures reliable chip formation and reduced vibration during longitudinal and profiling operations. The FW5 chipbreaker is designed to manage typical steel and cast-iron chips, reducing the risk of chip entanglement and improving process stability. As a result, machining cycles become more predictable, which supports higher throughput and consistent surface quality on finished components. Extended edge life with advanced coating technology The Tiger·tec Gold coating system provides enhanced wear resistance and thermal stability compared with conventional coatings, extending tool life under intermittent and continuous cutting conditions. The WKP01G grade, a coated cemented carbide, balances toughness and hardness to resist abrasive wear common when machining cast components, while maintaining edge integrity in alloyed and unalloyed steels. Geometry engineered for versatility and rigidity The Trigon 80° shape offers a rigid seating and versatile cutting angles for a range of turning tasks. The 0° (negative) rake geometry increases edge strength for heavier cuts, while the 1.2 mm corner radius supports stable cutting forces and improved finish in semi-finishing applications. This geometry is particularly useful where dimensional stability and repeatable tolerances are required. Practical benefits for workshop and production use Incorporating this insert into stable toolholders results in fewer interruptions for indexing and regrinding, contributing to smoother production flow. The insert size and thickness conform to common toolholder standards for easy integration, and the WKP01G grade is catalogued for machining both steel (P) and cast iron (K) according to ISO grouping, simplifying grade selection for mixed production batches. For application advice or to confirm stock availability of Walter Tools inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will provide machining parameters and suitability assessments for specific materials and setups. Technical Data Article number: WNMG080412-FW5-WKP01G-WALTER Designation: WNMG080412-FW5 WKP01G Manufacturer: Walter Tools Facts Insert form: Trigon 80° Cutting edge radius: 1.2 mm Rake angle: 0° (negative) Chipbreaker: FW5 Grade/Coating: WKP01G / Tiger·tec Gold Size designation: 08 Thickness designation: 04 Tolerance class: M Material applicability: P (steel), K (cast iron) Special features Coated cemented carbide grade WKP01G Engineered for steel and cast-iron machining Robust negative-rake geometry for stable cutting Suitable for finishing and medium roughing Walter Tools product series Tiger·tec Gold FAQ What materials is this insert suitable for? The WNMG080412-FW5 WKP01G insert from Walter Tools is specified for steel (P) and cast iron (K) applications according to ISO material groups. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker on the Walter Tools insert promotes short, controlled chips for improved evacuation and reduced risk of built-up edge during turning of steel and cast iron. Is the WKP01G grade suitable for interrupted cuts? Yes, the WKP01G coated grade offers a balance of toughness and wear resistance that is beneficial for interrupted cuts and variable engagement typical in turning operations. What advantage does the Trigon 80° form provide? The Trigon 80° geometry gives a rigid seating and versatile cutting orientations, which enhances stability and repeatability on the lathe when using this Walter Tools insert. Can the insert be used for finishing to tight tolerances? With its 1.2 mm corner radius and the Tiger·tec Gold coating, the insert supports good surface quality and dimensional stability for finishing and semi-finishing tasks. Manufacturer: Walter Tools Protected trademarks and product names mentioned are the property of their respective owners. Brand names and registered trademarks are used solely for identification and explanation. There is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
WNMG080412-FW5 WPP10G FW5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the FW5 chipbreaker for reliable steel machining and long tool life; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. WNMG080412-FW5 WPP10G indexable turning insert — Tiger·tec Gold, Trigon 80° — Walter Tools The WNMG080412-FW5 WPP10G is an indexable turning insert with a Tiger·tec Gold coated carbide grade, designed for efficient and controlled machining of steel using a Trigon 80° geometry. Tiger·tec Gold coated carbide Optimised FW5 chip control Trigon 80° geometry for stable turning Corner radius 1.2 mm for robust edge Higher process stability through advanced coating technology The combination of Tiger·tec Gold coating and the WPP10G carbide grade delivers consistent wear resistance and thermal stability when machining steel. The coated carbide construction is optimised for the typical heat and chip formation encountered in turning operations on ISO P materials, which helps to extend tool life and reduce interruptive tool changes. As a result, production runs maintain a steady throughput and quality levels remain predictable even under varied cutting conditions. Geometry that enhances repeatability and component finish A Trigon 80° shape with a 0° (negative) relief angle and a 1.2 mm corner radius gives the insert mechanical strength at the cutting edge, contributing to dimensional stability and repeatable surface results. The FW5 chipbreaker is tuned to produce controllable chips for many turning operations on steel, aiding chip evacuation and lowering the risk of edge damage. These geometric choices combine to reduce unexpected downtime and improve the consistency of finished parts. Practical benefits for workshop efficiency and economy The grade balance of the WPP10G series provides a pragmatic compromise between wear resistance and toughness, suitable for a wide range of steel components from straightforward to more demanding operations. Fewer insert changes and predictable wear behaviour translate into lower effective machining costs and simpler process planning. Technical advisors can help integrate this insert into existing toolholders and turning programmes to maximise the economic benefit for short and long production runs. Contact Metav Werkzeuge for application advice and availability of Walter Tools Tiger·tec Gold inserts, including the WNMG080412-FW5 WPP10G, at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: WNMG080412-FW5-WPP10G-WALTER Designation: WNMG080412-FW5 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Shape: Trigon 80° Corner radius: 1.2 mm Relief/clearance angle: 0° (negative) Chipbreaker: FW5 Size: 08 Thickness: 04 Tolerance class: M Special features Coating series: Tiger·tec Gold Grade: WPP10G (coated carbide) Material suitability: Steel (ISO P) Execution: G Series: Tiger-tec Gold FAQ Which materials is this insert intended for? The WNMG080412-FW5 WPP10G is specified for machining steel (ISO P); the grade and coating are tailored to the heat and chip formation typical of steel turning. What are the key geometry characteristics of the insert? This indexable insert features a Trigon 80° profile, 0° (negative) relief, a 1.2 mm corner radius and the FW5 chipbreaker for controlled chip formation. What does the Tiger·tec Gold series provide? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, supporting longer tool life and consistent performance in steel turning applications. Is this insert suitable for stainless steel or other materials? Suitability for stainless steel is not specified in the provided data; the WNMG080412-FW5 WPP10G is designated for steel (ISO P) and should be selected accordingly. How is chip control handled with this geometry? The FW5 chipbreaker is designed to produce stable and controllable chips in many steel turning tasks, aiding evacuation and reducing edge damage on the insert. What is the SKU for ordering and reference? The item can be referenced by SKU WNMG080412-FW5-WPP10G-WALTER for stock checks and ordering. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080412-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from high wear resistance, consistent chip control and universal performance in steel turning with a compact Trigon insert; combine reliable edge stability and the Tiger·tec Gold coating for steady cycle times. Order the WNMG080412-FW5 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. WNMG080412-FW5 WPP20G – Trigon 80° turning insert, Tiger·tec Gold (Walter Tools) WNMG080412-FW5 WPP20G is a Trigon-shaped indexable insert optimised for turning steel components with a Tiger·tec Gold coating and an FW5 chipbreaker. Tiger·tec Gold coated grade WPP20G Trigon 80° geometry for positive cutting FW5 chipbreaker for consistent chip control Corner radius 1.2 mm for stable cutting edge Faster, more predictable turning for steel components The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance between wear resistance and toughness that is tailored to machining steel according to ISO recommendations. The Trigon 80° geometry provides a favourable cutting angle for general turning, while the corner radius 1.2 mm improves the load distribution on the cutting edge, reducing micro-chipping and enhancing tool life. This results in fewer insert changes and more predictable cycle times on production shafts, journals and turned bores. Reliable chip control and surface quality under varied conditions The FW5 chipbreaker is designed to form short, manageable chips across a broad speed and feed range, which supports uninterrupted machining and safer chip handling. As a coated carbide insert, the cutting edge resists thermal and abrasive wear, helping to maintain surface finish and dimensional stability during longer passes. For workshops aiming to increase throughput, the insert’s consistent cutting behaviour reduces downtime and supports higher first-pass quality. Versatility and process security for everyday turning tasks This indexable insert suits universal turning operations in steel, from general finishing to moderate roughing, thanks to the balanced properties of the WPP20G grade. The 0° (negative) relief provides a robust edge for interrupted cuts or unstable setups, while the Trigon form offers multiple cutting corners per insert for economic use. Backed by Walter Tools’ production standards, this grade supports stable chip formation and steady performance across batches, contributing to improved process security and repeatable results. Contact Metav Werkzeuge for tailored cutting data, batch availability and genuine Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to request technical recommendations and delivery options Technical Data SKU: WNMG080412-FW5-WPP20G-WALTER Designation: WNMG080412-FW5 WPP20G Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FW5 Core Dimensions & Tolerances Shape: Trigon 80° Size: 08 Thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Materials & Special Features Coated carbide (Tiger·tec Gold) Suitable for Steel (P) Application: turning / indexable insert Balanced wear resistance and toughness FAQ What materials is this insert designed for? The WNMG080412-FW5 WPP20G insert is designed primarily for machining steel (ISO group P) and performs across unalloyed and alloyed steel grades. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker promotes short, controllable chips and supports consistent surface finish and uninterrupted production when using the Tiger·tec Gold WPP20G grade. What are the main geometry advantages of this Trigon insert? The Trigon 80° form offers a positive cutting geometry with multiple cutting edges per insert, while the 1.2 mm corner radius improves edge stability for longer tool life. Is the insert suitable for interrupted cuts? Yes; the 0° (negative) relief and the robust coating make the insert resilient in interrupted cutting conditions and less prone to edge damage. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are mentioned for clarification only; there is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
WNMG080412-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, WKK10S coated‑carbide performance and a trigon 80° geometry for productive cast‑iron turning; order the insert directly via Metav Werkzeuge or consult the team for application advice. WNMG080412-MK5 WKK10S turning insert for cast iron — Walter Tools, Tiger‑tec Silver WNMG080412-MK5 WKK10S is a trigon 80° turning insert designed for high‑productivity machining of cast iron components with a Tiger‑tec Silver coated carbide grade. Tiger‑tec Silver coated carbide Optimised for cast iron (K) Trigon 80° geometry for stability MK5 chipbreaker for consistent chips Greater throughput through wear‑resistant grade and coating The combination of the WKK10S grade and the Tiger‑tec Silver coating delivers improved wear resistance and prolonged cutting life when machining abrasive cast‑iron materials. Coated carbide technology reduces flank and crater wear under the typical short, brittle‑chip conditions of grey and nodular cast irons, which leads to longer tool life and fewer indexings. From a process viewpoint, this translates directly into higher uptime on the lathe and a lower cost per component — measurable gains for batch production and serial turning applications. Geometry and chip control that stabilise the cut A trigon 80° shape with a 0° negative rake and a 1.2 mm corner radius provides mechanical robustness at the cutting edge and supports consistent surface finish on interrupted or profiled cast‑iron work. The integrated MK5 chipbreaker is tuned for the chip forms typical of cast iron, promoting secure chip evacuation and reducing the risk of rework caused by chip entanglement. In practice, the defined geometry ensures repeatable tolerances and a reliable surface quality with stable cutting forces, which is particularly valuable on less rigid setups or where short cycle times are required. Practical selection and application guidance for process reliability Marked for ISO group K, the insert is specifically suited to cast‑iron applications and should be paired with a matching WNMG‑compatible toolholder and appropriate cutting data for the workpiece grade. For general guidance, begin with conservative feeds and speeds and increase within tool life limits while monitoring wear; the WKK10S grade is engineered to cope with the abrasive nature of cast iron while maintaining edge stability. The clear technical match between grade, chipbreaker and geometry simplifies tooling decisions and supports consistent production results across a range of cast‑iron components. For reliable cast‑iron performance with Tiger‑tec Silver, contact Metav Werkzeuge for tailored technical advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WNMG080412-MK5-WKK10S-WALTER Designation: WNMG080412-MK5 WKK10S Product type: Turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 08 Plate thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Shape: Trigon 80° Tolerance class: M Special features Grade: WKK10S (coated carbide) Chipbreaker: MK5 Suitable for: Cast iron (K) Execution: G SKU: WNMG080412-MK5-WKK10S-WALTER FAQ What materials is this insert intended for? The insert is specified for machining cast iron (ISO group K); the WKK10S grade and Tiger‑tec Silver coating are optimised for abrasive cast‑iron behaviour. Which geometry attributes improve stability in interrupted cuts? The trigon 80° shape combined with a 0° negative rake and 1.2 mm corner radius provides mechanical strength and consistent surface finish in interrupted or profiled turning. How does the MK5 chipbreaker affect chip formation? The MK5 chipbreaker is designed for typical cast‑iron chips, producing short, controllable fragments to aid chip evacuation and reduce the risk of re‑cutting or workpiece damage. Can this insert be used in heavy‑duty roughing operations? The coated‑carbide grade and robust trigon geometry support productive roughing in cast iron, though cutting data should be adjusted to machine rigidity and part tolerances. How should the tool be paired for best results? Use a compatible WNMG‑capable toolholder and start with conservative speeds and feeds, then increase within observed tool life limits; the Walter Tools grade is intended to deliver stable performance across serial production runs. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
WNMG080412-MK5 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of proven cutting performance on cast iron, robust edge geometry and reliable chip control for efficient turning operations. Order the inserts directly via Metav Werkzeuge or consult its specialists for application-specific recommendations. WNMG080412-MK5 WKK20S trigon 80° indexable insert for cast iron, Tiger‑tec Silver (Walter Tools) The WNMG080412-MK5 WKK20S is a precision trigon 80° indexable insert designed for productive turning of cast iron components, offering a coated carbide grade optimised for abrasive wear and stable chip formation. Tiger‑tec Silver coated carbide grade WKK20S Trigon 80° geometry for robust cutting MK5 chipbreaker for short, controlled chips Negative 0° rake for secure, stable cuts Maximise productivity on abrasive cast iron with a wear‑resistant grade The Tiger‑tec Silver WKK20S grade provides a coated carbide formulation engineered for abrasive cast iron machining (ISO group K). This composition focuses on reducing flank and crater wear while maintaining a consistent cutting edge under heavy use. The result is longer tool life and fewer index changes, which translates directly into higher machine uptime and lower per‑part tooling cost. For production environments that demand repeatable results and predictable tool change intervals, the combination of coating technology and carbide substrate offers measurable productivity gains. Secure machining and controlled chips through geometry and chipbreaker design Geometry plays a decisive role in stability and surface result. The Trigon 80° form, combined with the MK5 chipbreaker and a negative 0° rake, creates a robust cutting arrangement that resists edge chipping and handles interrupted cuts with greater confidence. The insert’s 1.2 mm corner radius contributes to a stronger edge and improved tool life when facing high radial forces. The MK5 chipformer is tuned to produce short, fragmented chips when turning cast iron, reducing the need for elaborate chip evacuation and lowering the risk of reworking or part damage caused by long swarf. Practical benefits for workshop and production use This indexable insert is intended for metalworkers and production shops seeking a reliable solution for cast iron turning. The insert’s format supports straightforward seat‑and‑clamp replacement on compatible toolholders, keeping maintenance and tool change times short. Because the grade and geometry are optimised for abrasive cast iron, workpieces commonly show improved surface integrity and consistent dimensional control over long production runs. Documentation of the grade and series supports process planning and tool allocation across multiple machines for standardised setups. Trusted brand performance and consistent results Walter Tools’ Tiger‑tec Silver series combines modern coating processes with established carbide technology to deliver stable chip control and reliable edge behaviour. The result is predictable performance across batches and workshops, which supports quality assurance and process stability. Selecting this insert means choosing a component that emphasises repeatability and efficiency in cast iron turning, backed by a manufacturer known for precision tooling and global availability. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts and application‑specific recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG080412-MK5-WKK20S-WALTER Name: WNMG080412-MK5 WKK20S Product type: Indexable insert (turning) Series: Tiger‑tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 04 Corner radius: 1.2 mm Geometry: Trigon 80° Clearance/rake: 0° (negative) Tolerance class: M Special features Chipbreaker: MK5 Coating/grade: WKK20S (coated carbide) Suitable for: Cast iron (ISO group K) Designed for abrasive wear resistance Stable chip formation and short chips Robust edge for interrupted cuts FAQ Which materials is this insert best suited for? This insert is optimised for cast iron; the WKK20S grade and Tiger‑tec Silver coating are specifically tuned for ISO group K materials. What does the MK5 chipbreaker achieve? The MK5 chipbreaker produces short, controlled chips in cast iron turning, improving chip evacuation and reducing swarf management issues. How does the Trigon 80° geometry affect cutting? The Trigon 80° shape provides a strong cutting edge and rigidity, contributing to stable machining and extended edge life under high radial loads. Is the insert suitable for interrupted cuts or roughing? Yes. The combination of a 1.2 mm corner radius, negative rake and robust geometry is suited to demanding conditions, including interrupted cuts typically encountered in roughing. How is the designation WNMG080412-MK5 WKK20S interpreted? The designation indicates a WNMG form with an 80° trigon shape and specified corner radius, equipped with an MK5 chipbreaker and the WKK20S coated carbide grade by Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names belong to their respective owners. Mention of brand names and trademarks is for explanation only; there is no affiliation implied between our company and the trademark holders. The offered article is an original, factory‑new product of the manufacturer.
WNMG080412-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a robust Trigon 80° geometry for consistent stainless-steel turning performance; order the WNMG080412-MM5 WMP20G insert via Metav Werkzeuge or request tailored machining advice from the consultants. WNMG080412-MM5 WMP20G Turning Insert — Trigon 80°, 1.2 mm corner radius — Walter Tools WNMG080412-MM5 WMP20G is a trigon-shaped turning insert engineered for medium to robust stainless-steel machining applications, offering a balance of edge strength and consistent chip control. Tiger·tec Gold coated carbide grade WMP20G Designed for stainless steel machining Trigon 80° shape for versatile turning 1.2 mm corner radius for robust edges Improved process stability for stainless-steel turning The combination of the Tiger·tec Gold coating and the WMP20G substrate supports secure chip formation when machining stainless steel, a material group known for toughness and a tendency to form built-up edge. The coating promotes heat resistance and wear control, which translates into more predictable tool life and fewer interruptions. For production environments where consistent component quality and reduced rework are priorities, this insert helps maintain cycle times by limiting unexpected edge failures. Geometry tailored to robustness and versatility The Trigon 80° shape with a 1.2 mm corner radius and a 0° (negative) rake angle increases edge strength and resistance to mechanical and thermal loads. The MM5 chipbreaker is designed to support stable chip detachment under medium to heavy conditions, reducing the likelihood of long, tangled chips and improving surface finish stability. These geometry choices make the insert suitable for interrupted cuts and heavier cross-sections where a strong cutting edge is essential. Practical benefits and application guidance The insert is specified for the ISO material group M, explicitly indicating suitability for stainless steel. In practice, this means safer cutting in jobs where toughness and heat generation are challenges. The product’s balanced design reduces downtime caused by tool changes and can improve overall productivity in batch production or mixed-lot machining. For tailored recommendations on feeds and speeds based on machine rigidity and component geometry, Metav Werkzeuge provides application support to optimise cutting parameters for the WNMG080412-MM5 WMP20G insert. Contact Metav Werkzeuge for application-specific parameter advice and to secure the WNMG080412-MM5 WMP20G insert from Walter Tools for your next stainless-steel turning operation Technical data SKU: WNMG080412-MM5-WMP20G-WALTER Article: WNMG080412-MM5 WMP20G Manufacturer: Walter Tools Product type: Turning indexable insert Series: Tiger-tec Gold Facts Insert size: 08 Thickness code: 04 Corner radius: 1.2 mm Shape: Trigon 80° Relief angle: 0° (negative) Tolerance class: M Special features Grade: WMP20G Chipbreaker: MM5 Coating technology: Tiger·tec Gold (coated carbide) Application group: ISO M (stainless steel) FAQ What materials is this insert suitable for? The WNMG080412-MM5 WMP20G insert from Walter Tools is specified for ISO group M and is suitable for machining stainless steel under medium to robust conditions. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold on the WMP20G grade enhances wear resistance and heat management, improving tool life and process stability when turning demanding stainless-steel grades. What are the advantages of the Trigon 80° shape and 1.2 mm radius? The Trigon 80° geometry with a 1.2 mm corner radius delivers a robust cutting edge and versatile approach angles, supporting heavier cuts and better resistance to edge chipping in tougher turning tasks. Is the MM5 chipbreaker suitable for finishing? The MM5 chipbreaker is optimised for stable chip control in moderate to heavier cutting conditions; it provides improved chip form and surface consistency, particularly in semi-finishing and roughing operations on stainless steel. Can this insert handle interrupted cuts? Yes, the negative 0° relief and robust corner radius make the insert well suited to interrupted cutting and applications requiring enhanced edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
WNMG080412-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the MM5 chipbreaker for secure chip formation and extended edge life when machining stainless steels; the Trigon 80° geometry and 1.2 mm corner radius add robustness for medium to robust turning operations. Order genuine inserts via Metav Werkzeuge or consult our specialists for cutting-data recommendations. WNMG080412-MM5 WMP20S Trigon 80° turning insert — Tiger·tec Silver, Walter Tools A WNMG080412-MM5 WMP20S turning insert designed for productive and reliable machining of stainless steels in medium to robust cutting conditions Tiger·tec Silver coating for stable cutting Optimised MM5 chipbreaker for stainless steel Trigon 80° geometry with 1.2 mm radius Consistent cutting performance with coated carbide technology The combination of Tiger·tec Silver and a coated carbide substrate delivers stable chip control and predictable wear behaviour when machining stainless steels (ISO group M). The advanced coating reduces adhesive wear and supports longer periods between insert changes, which contributes directly to higher component throughput and lower process variability. The MM5 chipbreaker is tailored to the demands of tough, ductile stainless materials and promotes short, controllable chips that ease evacuation and reduce the risk of built-up edge, improving repeatability across production batches. Robust geometry for secure heavy cuts and access in tight features The Trigon 80° form and negative rake 0° establish a strong cutting edge that tolerates interrupted cuts and heavy radial loads, while the 1.2 mm corner radius increases edge strength for longer service life. This geometry balances stability and versatility: it supports roughing passes with confidence and maintains a sufficiently sharp profile for semi-finish steps. The insert’s format is compatible with standard WNMG-style toolholders, allowing seamless integration into existing tool setups without costly adapter changes. Practical shop-floor benefits and process reliability Adopting this indexable insert results in measurable operational gains: fewer insert exchanges, reduced downtime for regrinding, and more consistent surface quality on corrosion-resistant alloys. The WMP20S grade is formulated specifically for rostfreie Stähle and similar alloys, offering a compromise between toughness and wear resistance to handle variable stainless compositions and cutting conditions. For process engineers, the result is a more predictable machining window and straightforward documentation of tool life for production planning. Contact Metav Werkzeuge today to specify the appropriate WNMG080412-MM5 WMP20S insert for the intended stainless steel grade and cutting strategy — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical consultation and delivery through Metav Werkzeuge Technical data Article number: WNMG080412-MM5-WMP20S-WALTER Name: Drehwendeschneidplatte WNMG080412-MM5 WMP20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Facts Corner radius: 1.2 mm Relief angle: 0° (negative) Insert shape: Trigon 80° Size code: 08 Thickness code: 04 Special features Coating / technology: Tiger·tec Silver Chipbreaker: MM5 Application: stainless steels (ISO group M) Cutting grade: WMP20S Manufacturer brand: Walter Tools FAQ What materials is this insert designed for? The WNMG080412-MM5 WMP20S turning insert is designed primarily for stainless steels (ISO group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WNMG080412-MM5 WMP20S reduces adhesive wear and supports a more stable cutting edge, extending tool life and improving surface quality when machining stainless steels. What role does the MM5 chipbreaker play in chip control? The MM5 chipbreaker promotes short, controllable chips suitable for ductile materials like stainless steels, helping to avoid long, tangled chips and easing chip evacuation at the tool tip. Is this insert suitable for roughing and finishing operations? The Trigon 80° form with 1.2 mm corner radius and negative rake 0° provides the robustness expected for roughing and strong semi-finishing performance; for high-precision finishing, a smaller corner radius or a finishing-specific grade may be preferable. Will this insert fit standard WNMG toolholders? Yes, the WNMG080412-MM5 WMP20S corresponds to the WNMG insert family and is compatible with standard WNMG-style toolholders, allowing straightforward replacement and setup. The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world's leading manufacturers of precision metal‑cutting tools. Protected trademarks and product names are the property of their respective owners. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080412-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM10S grade and a robust 1.2 mm corner radius to secure stable chip formation and longer tool life in demanding turning operations; order via Metav Werkzeuge or consult our specialists for application support. WNMG080412-MM5 WSM10S — Turning insert, Trigon 80°, 1.2 mm corner radius (Walter Tools) The WNMG080412-MM5 WSM10S is a trigon 80° indexable turning insert designed for machining rostfreier Stahl and heat‑resistant alloys where secure chip control and edge stability are essential Tiger·tec Silver coating for high heat resistance WSM10S grade for stable chip formation Trigon 80° geometry for secure cutting edges 1.2 mm corner radius for robust finish High heat resistance and grade advantages for demanding materials The combination of the Tiger·tec Silver coating with the WSM10S carbide grade provides enhanced thermal resistance and edge protection when machining rostfreier Stahl and superalloys. The coating reduces built‑up edge and improves wear behaviour at elevated cutting temperatures, while the grade supports consistent chip formation. For users facing high thermal loads, this results in fewer interruptions for insert changes and a more reliable process, directly supporting continuous production. Geometry and edge design that improve process stability The Trigon 80° form and the 1.2 mm corner radius deliver a solid cutting geometry that resists edge chipping and produces a consistent surface finish. The insert’s 0° (negative) rake promotes strength at the cutting edge for interrupted cuts or heavier engagement, and the MM5 chipformer helps break and evacuate chips efficiently. Together, these features reduce the risk of built‑up edge and enable stable cutting parameters, which simplifies process setup and reduces scrap rates. Productivity benefits through reduced downtime and predictable tool life Reliable chip control and a robust edge mean fewer tool changes and less machine idle time. The insert’s properties support longer life per edge and predictable wear progression, which help to optimise tool change intervals and overall machining costs. For production environments where throughput and repeatability matter, the insert contributes to improved machining efficiency and consistent part quality across batches. Practical integration and application guidance The insert is suitable for machining applications in the ISO groups indicated — notably rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) — and is supplied in the standard WNMG form familiar to most turning toolholders. When selecting cutting data, prioritise stable feeds and appropriate cooling strategies for rostfreier Stahl; the insert’s coating and geometry support conventional turning sequences while providing a margin for tougher materials. For tailored recommendations, technical data and batch availability, Metav Werkzeuge’s consultants are available to advise on optimal parameters and holder compatibility. Contact Metav Werkzeuge to discuss suitable cutting parameters for Walter Tools Tiger·tec Silver inserts or to request technical support and availability for the WNMG080412-MM5 WSM10S Technical data Article number: WNMG080412-MM5-WSM10S-WALTER Name: Drehwendeschneidplatte WNMG080412-MM5 ISO designation: WNMG080412-MM5 WSM10S Brand: Walter Tools Series: Tiger‑tec Silver Core data Corner radius: 1.2 mm Free rake angle: 0° (negative) Geometry: Trigon 80° Size code: 08 Thickness code: 04 Tolerance class: M Special features Grade: WSM10S (coated cemented carbide) Chipformer: MM5 Applicable material groups: S / M Execution: G Material designation: S / M FAQ What materials is this insert suitable for? The WNMG080412-MM5 WSM10S insert is intended for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), using the coating and grade to support secure chip formation and edge stability. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WSM10S grade increases thermal resistance and reduces built‑up edge, enabling longer cutting times and more consistent wear behaviour when machining demanding materials. What benefits does the Trigon 80° geometry provide? Trigon 80° geometry offers strong cutting edges and good access for turning profiles; paired with a 1.2 mm corner radius it enhances edge robustness and contributes to improved surface finish and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080412-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
High thermal resistance and a Tiger·tec Silver coated grade deliver consistent wear behaviour and long tool life; the Trigon 80° geometry with a 1.2 mm corner radius provides robust edge strength for demanding cuts, and the MM5 chipbreaker ensures reliable chip control in stainless and heat-resistant alloys. Order the WNMG080412-MM5 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. WNMG080412-MM5 WSM20S – Indexable turning insert, Trigon 80°, 0° negative rake (Walter Tools) WNMG080412-MM5 WSM20S is an indexable turning insert designed for heavy-duty machining of stainless steels and heat-resistant superalloys, combining a coated carbide grade with a robust geometry for secure cutting performance. Tiger·tec Silver coated carbide WSM20S Optimised for stainless steels and superalloys Trigon 80° shape with 1.2 mm corner radius 0° negative rake with MM5 chipbreaker Robust edge geometry for demanding materials The trigon 80° outline and a 1.2 mm corner radius create a mechanically strong cutting edge that reduces the risk of chipping and vibration during interrupted cuts. With a 0° negative rake, the insert offers a conservative edge angle that increases edge stability under high cutting forces, making it particularly suitable for roughing passes and heavy feeds. The combination of shape and rake improves process reliability and leads to fewer tool changes and steadier cycle times on production lines. Coating and grade that extend productive runtime The WSM20S grade, built on Tiger·tec Silver coating technology, provides a balanced response to the adhesion and thermal demands of ISO group M (stainless steels) and S (heat-resistant superalloys, including titanium). The multi-layer coating enhances wear resistance and maintains a stable cutting edge at elevated temperatures, which translates into higher usable cutting lengths and a better cost-per-part ratio. For operations seeking predictable tool life and consistent surface quality, this coated grade supports more productive machining windows. Controlled chip formation and surface quality The MM5 chipbreaker is engineered to generate compact, controllable chips in the targeted material groups, so the process is less dependent on restrictive machining conditions. That results in fewer stoppages for chip clearance and a more consistent surface finish on the turned component. The insert’s tolerance class M further assures repeatable seating and interchangeability in toolholders, supporting tight process control in series production and minimising downtime due to indexing or regripping. Application focus and operational benefits Engineered for demanding sectors such as medical, aerospace and high-value subcontract machining, this insert excels in the turning of stainless steels and heat-resistant superalloys where heat generation and edge stability are critical. The Trigon geometry offers a good compromise between strength and access in shoulder and profile turning, while the coated grade and chipbreaker reduce the need for overly conservative cutting data. For machinists seeking dependable performance under strenuous conditions, this solution helps to increase throughput and reduce scrap rates. For tailored cutting data, availability checks or application recommendations for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and fast supply. Technical data Article number: WNMG080412-MM5-WSM20S-WALTER Designation: WNMG080412-MM5 WSM20S Product type: Indexable turning insert Brand: Walter Tools Key dimensions Insert size: 08 Thickness code: 04 Corner radius: 1.2 mm Shape angle: 80° Rake angle: 0° (negative) Features Grade: WSM20S (Tiger·tec Silver coated carbide) Chipbreaker: MM5 Material groups: S / M (superalloys/titanium, stainless steels) Tolerance class: M Series: Tiger·tec Silver FAQ What materials is this insert suitable for? The WNMG080412-MM5 WSM20S is specified for ISO group M (stainless steels) and group S (heat-resistant superalloys and titanium), where the Tiger·tec Silver grade supports secure chip formation and thermal resistance. How does the Trigon 80° shape affect machining? The Trigon 80° outline increases edge strength and access in shoulder and profile turning, improving stability for heavy cuts while preserving adequate cutting geometry for finishing passes. Which applications benefit most from the MM5 chipbreaker? The MM5 chipbreaker is ideal for operations that require compact, controllable chips in stainless steels and superalloys, reducing chip-handling issues and supporting consistent surface quality. Can the insert be used for roughing and finishing? Yes, the insert’s robust geometry and coated grade make it suitable for roughing under high forces and, with adjusted feeds and speeds, for achieving acceptable finishes in stainless and heat-resistant alloys. Is the WSM20S grade suitable for high-speed machining? WSM20S is optimised for thermal stability and wear resistance; while it extends performance in demanding materials, machining parameters should be adapted to the component material, coolant strategy and machine capability to exploit high-speed benefits safely. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WNMG080412-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of high cutting-edge stability, Tiger‑tec Silver coated carbide, and the proven MM5 chipbreaker for efficient machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or ask our consultants for application support. WNMG080412-MM5 WSM30S trigon 80° turning insert — negative rake, 1.2 mm corner radius (Walter Tools) A WNMG080412-MM5 WSM30S turning insert designed for heavy‑duty machining of stainless steel and superalloys, delivering stable chip control and extended tool life in demanding production environments Tiger‑tec Silver coated carbide grade WSM30S Trigon 80° form with 0° negative rake MM5 chipbreaker for secure chip formation 1.2 mm corner radius for robust cutting edges Reliable performance for stainless steel and superalloys The Tiger‑tec Silver grade WSM30S is a coated carbide solution developed for difficult‑to‑cut materials. Its coating and substrate combination promote stable chip formation and resist rapid wear when turning stainless steel (ISO M) and heat‑resistant superalloys (ISO S). This results in more predictable tool life and fewer unexpected tool changes, which supports continuous production and reduces process downtime. The MM5 chipbreaker is tuned to favour short, controllable chips under interrupted or continuous cuts, improving operator safety and machine cleanliness. Geometry engineered for productivity and edge security The Trigon 80° configuration with a 0° negative rake provides a secure cutting geometry for heavy engagement and interrupted cuts; it reduces the tendency for edge chipping when cutting tougher alloys. A 1.2 mm corner radius increases the effective edge strength while maintaining an acceptable surface finish on the workpiece. In practice, this geometry enables higher metal removal rates without sacrificing repeatability, making the insert suitable for roughing and semi‑finishing operations where cutting‑edge stability and robustness are priorities. Practical benefits and easy process integration As a standard indexable insert form, the item fits common WNMG toolholders and integrates into established turning setups without special tooling changes. The coated grade supports elevated cutting parameters, which can shorten cycle times and increase throughput — a clear cost‑efficiency argument in production planning. For engineers and shop floor planners, the insert’s combination of chip control, edge durability and a proven coating system translates into fewer tool inventory variants and simpler process parameter selection. Application guidance and safety considerations When machining stainless steel and superalloys with this insert, use stable clamping and appropriate cutting fluids where specified by the machine or workpiece supplier to manage heat and lubrication. The MM5 chipbreaker assists with short chip formation; however, machining parameters should be validated on representative parts to confirm chip behaviour and surface finish. Where possible, monitor machining forces during initial trials to fine‑tune feeds and speeds for optimal balance between productivity and tool life. Contact Metav Werkzeuge for application advice, cutting parameter recommendations and rapid supply of Walter Tools Tiger‑tec Silver inserts Technical data Article number / SKU: WNMG080412-MM5-WSM30S-WALTER Product: Drehwendeschneidplatte / turning insert WNMG080412-MM5 WSM30S Brand: Walter Tools Series: Tiger‑tec Silver Facts Insert form: Trigon 80° Rake angle: 0° (negative) Corner radius: 1.2 mm Size designation: 08 Thickness code: 04 Special features Grade: WSM30S (coated carbide) Chipbreaker: MM5 Material suitability: S / M (ISO S = superalloys/titanium; ISO M = stainless steel) Application focus: heavy‑duty turning, secure chip formation, stable cutting edge FAQ Which materials is this turning insert suitable for? The WNMG080412‑MM5 WSM30S insert from Walter Tools is designed primarily for stainless steel (ISO M) and for heat‑resistant superalloys and titanium (ISO S), offering secure chip control and thermal stability. What are the main benefits of the Tiger‑tec Silver WSM30S grade? Tiger‑tec Silver in the WSM30S grade provides a balanced coated carbide system that enhances cutting‑edge stability and wear resistance, which can extend tool life and support higher cutting parameters in demanding materials. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker produces short, controllable chips under typical turning conditions, improving machine hygiene and operator safety while maintaining consistent surface quality in roughing and semi‑finishing operations. Is the Trigon 80° form suitable for interrupted cuts? Yes — the Trigon 80° geometry combined with a 0° negative rake and a 1.2 mm corner radius increases resistance to edge chipping, making this insert well suited for interrupted cuts and heavy engagement typical in roughing. Can the insert be used in standard WNMG toolholders? The WNMG080412‑MM5 WSM30S uses the common WNMG geometry and fits standard toolholders for that form; initial parameter validation on representative parts is recommended to confirm optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected product designations are cited solely for explanation; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
WNMG080412-MP3 WPP05G WPP05G Wendeplatten - Walter Tools
Benefit from a high-performance combination of Tiger·tec Gold coating and the MP3 chipbreaker for consistent tool life and predictable cycle times. The robust Trigon 80° geometry with a 1.2 mm corner radius and 0° negative rake delivers stable cutting in Stahl; order via Metav Werkzeuge or consult their specialists for application support. WNMG080412-MP3 WPP05G turning indexable insert, Tiger·tec Gold for Stahl — Walter Tools The WNMG080412-MP3 WPP05G is a Trigon 80° indexable turning insert optimised for general turning of Stahl, offering a balanced combination of wear resistance and chip control for versatile production environments. Tiger·tec Gold coated carbide MP3 chipbreaker for controlled chips Trigon 80° for robust cutting edges 0° negative rake with 1.2 mm radius Boosted productivity through advanced coating technology The Tiger·tec Gold coating and the WPP05G grade provide a wear-resistant cutting edge that reduces downtime and extends insert life. The combination of a modern coating system with a coated carbide base means less frequent index changes and lower cost per part in medium- to high-volume turning of Stahl. The surface treatment improves oxidation resistance and heat handling during interrupted cuts, so each toolholder cycle achieves more consistent dimensional results and a predictable tool-change schedule. Predictable cycle times thanks to optimised chip control The MP3 chipbreaker is designed to shape short, controlled chips that evacuate reliably in typical turning conditions. Together with the 0° negative rake and Trigon 80° form, the insert resists edge chipping under heavier cuts and interrupted machining, supporting stable process windows. The 1.2 mm corner radius contributes to edge strength and allows slightly increased feed rates without compromising surface finish, which helps to shorten cycle times while maintaining component quality. Easy integration into turning processes and material versatility This grade is targeted at ISO group P applications and is suitable for a wide range of unalloyed and alloyed Stahl. Process integration is straightforward: standard toolholders for WNMG geometry accept the insert, and machining parameters used for comparable coated carbide grades typically apply with modest optimisation. The insert’s combination of stability and chip control supports a broad spectrum of turning tasks, from roughing to semi-finishing, enabling a streamlined tooling inventory and faster setup times. For application-specific recommendations or to secure availability of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and quick supply coordination. Technical Data SKU: WNMG080412-MP3-WPP05G-WALTER Designation: WNMG080412-MP3 WPP05G Manufacturer: Walter Tools Facts Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger·tec Gold (coated carbide) Chipbreaker: MP3 Material application: Stahl (ISO P) Shape: Trigon 80° Grade: WPP05G FAQ What cutting materials is this insert suitable for? This turning insert is designed primarily for ISO group P applications and is suitable for machining various unalloyed and alloyed Stahl using the WPP05G coated-carbide grade. How does the MP3 chipbreaker affect performance? The MP3 chipbreaker produces short, controllable chips that improve evacuation and stability; the result is fewer interruptions and more consistent cycle times when using the WNMG080412-MP3 WPP05G insert. Can this insert be used for interrupted cuts? Yes. The Trigon 80° geometry with a 0° negative rake and a 1.2 mm corner radius gives enhanced edge strength, making the insert suitable for interrupted cutting conditions typical in turning operations. Manufacturer/Responsible: Walter Tools (Walter AG), Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
The coated carbide combination of Tiger·tec Gold and the WPP10G grade delivers high productivity and stable chip formation for efficient steel turning; the trigon 80° form with a 1.2 mm corner radius ensures repeatable edge security and surface quality. Order the WNMG080412-MP3 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. WNMG080412-MP3 WPP10G — Turning indexable insert (Tiger·tec Gold) by Walter Tools The WNMG080412-MP3 WPP10G is a trigonal 80° turning insert engineered for reliable steel machining with a wear-resistant, coated carbide grade from the Tiger·tec Gold series. Tiger·tec Gold coating for high productivity WPP10G grade: wear-resistant coated carbide Trigon 80° form with 1.2 mm corner radius MP3 chipbreaker for controlled chip formation High productivity and reliable wear resistance for steel turning The combination of Tiger·tec Gold technology and the WPP10G carbide grade is designed to extend tool life while maintaining cutting performance when machining steel. The advanced coating reduces flank wear and improves thermal stability, which means longer intervals between index changes and less process downtime. For production environments seeking a measurable return on tooling investment, this insert supports higher cutting speeds and consistent dimensional results, translating into improved throughput and predictable maintenance cycles. Predictable chip control and secure cutting edge The MP3 chipbreaker is tailored to produce short, controllable chips in a wide range of steel applications, reducing risk to the workpiece and the machine. The trigon 80° geometry with a 1.2 mm corner radius provides a robust cutting edge that resists chipping during interrupted cuts and light shoulder work. This combination improves surface finish and reduces rework, while the negative 0° free angle contributes to cutting stability in heavier engagement scenarios. For operators with mixed batch sizes, this insert offers a dependable balance of edge strength and surface quality. Process guidance and practical advantages on the shop floor The insert’s configuration supports flexible turning strategies: moderate feeds with increased speeds for shorter cycle times, or conservative parameters where surface integrity is paramount. As a coated carbide insert intended for steel, it eases parameter selection by offering broad applicability across unalloyed and alloyed steels conforming to ISO P groups. The robust design minimises unexpected tool failures, helping to streamline setup planning and reduce scrap. For production managers, the result is improved process security and consistent part quality. Contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com to discuss suitability and application advice for this Walter Tools turning insert Technical data Article number: WNMG080412-MP3-WPP10G-WALTER SKU: WNMG080412-MP3-WPP10G-WALTER Designation: WNMG080412-MP3 WPP10G Product type: Turning indexable insert Facts Insert shape: Trigon 80° Corner radius: 1.2 mm Insert size: 08 Plate thickness: 04 Free angle: 0° (negative) Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP3 Suitable material group: Steel Tolerance class: M FAQ What materials is this insert intended for? The WNMG080412-MP3 WPP10G is specified for machining steel and is optimised for typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade increases thermal resistance and reduces wear, resulting in longer tool life and more consistent cycle times for steel turning operations. Which cutting scenarios suit the trigon 80° form? The trigon 80° geometry offers a strong cutting edge for general turning, light shoulder work and intermittent cuts, balancing edge security and accessibility in confined setups. Can this insert be used for finishing and semi-finishing? Yes; with the MP3 chipbreaker and a 1.2 mm corner radius, the insert supports both semi-finishing and finishing where controlled chip flow and surface quality are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-MP3 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, durable cutting performance and consistent chip control for reliable turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. WNMG080412-MP3 WPP20G Drehwendeschneidplatte – Trigon 80° (Tiger·tec Gold) by Walter Tools The WNMG080412-MP3 WPP20G is a negative Trigon 80° turning insert designed for efficient machining of steel in general turning applications. Tiger·tec Gold coated grade WPP20G Optimised MP3 chipbreaker for continuous cuts Trigon 80° insert with 1.2 mm corner radius Negative 0° rake for stable turning Designed for steel machining (ISO group P) Greater wear resistance and reliable steel machining The combination of the Tiger·tec Gold coating and the WPP20G grade delivers pronounced wear resistance and dependable performance when machining steels. The grade is engineered for the thermal and chip-formation characteristics typical of steel (ISO group P, see ISO 513) and provides a balanced compromise between hardness and toughness. For production environments this means fewer insert changes and more predictable tool-life, supporting stable cycle times and consistent part quality. Stable cutting geometry for improved surface finish A Trigon 80° geometry with a 1.2 mm corner radius and a 0° rake (negative) offers strong edge support and vibration resistance in conventional turning operations. The MP3 chipbreaker is optimised for continuous and medium feeds, promoting controlled chip flow and reducing the risk of built-up edge. The result is a measurable improvement in surface finish and dimensional stability, with the insert geometry helping to maintain accuracy in longer runs and reducing the need for subsequent finishing passes. Productivity advantages for series and workshop turning Manufactured by Walter Tools within the Tiger·tec Gold family, this insert balances economy and process security for small to medium batch production. The grade tolerates standard machining conditions for unalloyed and alloyed steels, enabling consistent cutting performance across a broad range of workpiece grades. With its MP3 chip control and robust negative geometry, the insert reduces downtime associated with edge failures and supports a more predictable production flow, making it suitable for operations seeking repeatable results and improved throughput. For application-specific advice or to secure the WNMG080412-MP3 WPP20G for current or upcoming turning tasks, please contact Metav Werkzeuge for tailored recommendations and supply options at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: WNMG080412-MP3-WPP20G-WALTER Designation: WNMG080412-MP3 Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Core dimensions Corner radius: 1.2 mm Free rake angle: 0° (negative) Insert form: Trigon 80° Insert size: 08 Plate thickness: 04 Tolerance class: M Special features MP3 chipbreaker Coating technology: Tiger·tec Gold Application group: steel (ISO group P) Coated cemented carbide grade Negative geometry for stable cutting FAQ What steels is this insert suitable for? The answer: The WNMG080412-MP3 WPP20G is intended for steels classified in ISO group P; the WPP20G grade is tuned for common unalloyed and alloyed steels. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the WNMG080412-MP3 WPP20G promotes continuous-chip control and stable chip evacuation, which helps to improve surface finish and reduce the risk of built-up edge in turning. Can this insert be used for finishing operations? Yes, the Trigon 80° form with a 1.2 mm corner radius provides good edge support and dimensional consistency, making the insert suitable for many semi-finish and finish turning tasks on steel. What makes Tiger·tec Gold beneficial for production? Tiger·tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, supporting longer tool life and more predictable cutting performance in series production. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-MP3 WPP30G G Wendeplatten - Walter Tools
Take advantage of a high-performance, coated grade and a proven chip control geometry to increase throughput and maintain machining reliability; benefit from the combination of the Tiger·tec Gold series and the WPP30G grade for efficient steel turning. Order the WNMG080412-MP3 WPP30G insert directly via Metav Werkzeuge or consult our specialists for application support. WNMG080412-MP3 WPP30G indexable turning insert, Trigon 80°, for steel — Walter Tools WNMG080412-MP3 WPP30G is a trigon-shaped indexable turning insert designed for robust steel machining applications, combining a coated carbide grade with an effective chipbreaker for consistent performance Tiger·tec Gold coating technology Optimised for steel machining (P) Trigon 80° insert form, 1.2 mm radius MP3 chipbreaker for reliable chip control Consistent tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP30G carbide grade provides a balance of enhanced wear resistance and toughness that is particularly effective when machining steel. The coating reduces flank and crater wear under the thermal loads typical of steel turning, while the substrate composition supports stable cutting-edge behaviour. This results in durability and reduced frequency of insert changes, which supports higher overall machine utilisation and lower per-part tooling costs. The insert is produced to tolerance class M, ensuring consistent geometry for repeatable results in production environments. Predictable chip formation and stable cutting geometry The MP3 chipbreaker, combined with the Trigon 80° form and a 1.2 mm corner radius, is engineered to deliver controllable chip flow and secure edge strength for a wide range of turning tasks. A negative 0° rake configuration helps to strengthen the cutting edge under interrupted cuts and heavier depths of cut, while the chipbreaker promotes short, broken chips across typical steel grades. These features reduce the risk of chip entanglement and enable uninterrupted operation in automated setups. The insert’s geometry is therefore suitable where process reliability and clear swarf evacuation are required. Application guidance and process relevance for production turning Designed primarily for ISO P materials, the insert is suitable across the spectrum of steel machining needs, from more wear-resistant to tougher grades, as defined by the supplier’s classification. In practice, the component provides a reliable compromise between abrasion resistance and fracture toughness, allowing machinists to maintain steady metal removal rates without excessive edge chipping. The trigon shape gives versatility for various turning operations, including profiling and light shoulder work. For tailored cutting data or to confirm suitability for a specific steel grade, process consultation is available to help integrate the insert into existing turning cycles. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to check stock or application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: WNMG080412-MP3-WPP30G-WALTER Label: Drehwendeschneidplatte WNMG080412-MP3 WPP30G Walter Tools Product type: Drehwendeschneidplatte Article designation: WNMG080412-MP3 Grade: WPP30G Series: Tiger-tec Gold Facts Insert form: Trigon 80° Insert size: 08 Thickness: 04 Corner radius: 1,2 Chipbreaker: MP3 Clearance / rake: 0° (negativ) Tolerance class: M Special features Coated carbide grade (Tiger·tec Gold) Intended application: Steel (ISO P) Suitable for a range of steel toughness levels Produced for stable chip control and edge security FAQ What materials is this insert suitable for? The WNMG080412-MP3 WPP30G insert is intended for steel machining and is classified for ISO P applications, covering a range of steel types from wear-resistant to tougher grades. How does the MP3 chipbreaker affect performance? The MP3 chipbreaker promotes consistent, broken chips and stabilises cutting forces, which helps maintain surface quality and reduces risk of chip-related interruptions. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and thermal stability, extending tool life during continuous steel turning operations and supporting higher productivity. Is the insert geometry suitable for interrupted cuts? Yes; the Trigon 80° shape together with the negative 0° configuration and a 1.2 mm corner radius provides robust edge strength suitable for interrupted cuts and tougher engagement conditions. How precise is the insert’s dimensional accuracy? The insert is manufactured to tolerance class M, offering consistent geometry suitable for repeatable production processes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned manufacturers. The offered article is an original, brand-new product from the manufacturer.
WNMG080412-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the versatile WPP05G grade to secure consistent performance in steel turning; the MP5 chipbreaker plus the robust Trigon geometry ensure reliable chip control and repeatable results. Order the inserts via Metav Werkzeuge or consult our specialists for application advice. WNMG080412-MP5 WPP05G — indexable turning insert, Tiger·tec Gold, MP5 chipbreaker (Walter Tools) WNMG080412-MP5 WPP05G is an indexable turning insert designed for productive steel machining with a coated cemented carbide grade from Walter Tools. Tiger·tec Gold coating for extended tool life MP5 chipbreaker for reliable chip control Trigon 80° shape with 1.2 mm corner radius Designed for steel machining (ISO 513 P) High-performance grade for productive steel turning The WPP05G grade from the Tiger·tec Gold series is a coated cemented carbide formulation optimised for steel applications. Designed with ISO 513 group P in mind, the grade balances wear resistance and toughness to cope with typical heat and chip formation during steel cutting. The combination of coating and substrate provides consistent edge stability, which reduces variation in tool change intervals and helps maintain component tolerances. For operations where predictable tool life and batch-to-batch repeatability matter, this insert supports a more efficient turning cycle and fewer unplanned interruptions. Geometry and chip control that improve process reliability The Trigon 80° insert shape and the MP5 chipbreaker work together to ensure dependable chip formation across a range of turning operations. The insert features an inscribed circle of 8 mm, a thickness of 4 mm and a corner radius of 1.2 mm, delivering a stable cutting edge for both medium finishing and roughing passes. The 0° negative rake increases edge strength under heavy cuts, while the chipping geometry channels swarf effectively to avoid tangling and surface damage. With tolerance class M, the inserts offer interchangeability that supports quick tool changes and consistent set-ups on production lathes. Practical benefits for workshop efficiency and process security Integrating this turning insert into a production line delivers tangible efficiency gains: improved cycle-time stability, fewer reworks and more predictable consumable consumption. The blend of toughness and coating performance means longer effective life in typical steel alloys, reducing unit costs per part. Specification clarity—geometry, grade, chipbreaker and tolerance—also simplifies tooling lists and ordering. For engineers seeking to standardise tooling across multiple machines, the WNMG080412-MP5 WPP05G helps align performance expectations and reduces set-up variability, supporting higher first-pass yields and steadier output. For reliable steel turning with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored advice and prompt supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: WNMG080412-MP5-WPP05G-WALTER Designation: WNMG080412-MP5 WPP05G Product type: Indexable turning insert Manufacturer: Walter Tools Core dimensions Inscribed circle: 8 mm Thickness: 4 mm Corner radius: 1.2 mm Shape: Trigon 80° Free rake: 0° (negative) Tolerance class: M Series: Tiger·tec Gold Grade: WPP05G Chipbreaker: MP5 Application group: Steel (ISO 513 P) Features Coated cemented carbide Designed for steel machining Robust negative rake geometry Stable chip formation and control Suitable for production turning FAQ What materials is this insert suited for? The WNMG080412-MP5 WPP05G is formulated for steel applications and corresponds to ISO 513 group P; it is optimised for common unalloyed and alloyed steels. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert improves chip control and evacuation, which helps maintain surface quality and reduces risk of chip entanglement during turning. What does the 0° negative rake mean for cutting? A 0° negative rake increases edge robustness under heavier cuts; the WNMG080412-MP5 WPP05G therefore offers greater resistance to edge chipping in demanding turning operations. Can this insert be used for finishing and roughing? Yes; the combination of Trigon 80° geometry and a 1.2 mm corner radius allows the insert to perform reliably in both medium finishing and moderate roughing passes. What tolerance and interchangeability can be expected? The insert is supplied to tolerance class M, enabling repeatable seating and straightforward tool changes across compatible toolholders. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only. There is no affiliation between our company and the brands named; the offered article is an original, factory-new product from the manufacturer Walter Tools.
WNMG080412-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, reliable Tiger·tec Gold coating and precise chip control for consistent machining of steel components. Order the WNMG080412-MP5 WPP10G insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMG080412-MP5 WPP10G – indexable turning insert for steel, Trigon 80° | Walter Tools WNMG080412-MP5 WPP10G is an indexable turning insert designed for robust steel machining with a negative 0° relief angle and targeted chip control Tiger·tec Gold coating WPP10G for steel machining MP5 chipbreaker for controlled chip formation Trigon 80° geometry for stable cutting action Corner radius 1.2 mm for consistent tool life Increased uptime through proven coating and grade The combination of Tiger·tec Gold technology and the WPP10G grade delivers a wear-resistant, coated carbide that is optimised for the thermal and mechanical conditions encountered when machining steel. This results in improved tool life and fewer index changes on the shop floor, which directly reduces downtime and increases output. The coated surface also enhances resistance to built-up edge, helping to maintain consistent dimensional results over longer production runs. Precise chip control and geometry for reliable performance With the MP5 chipbreaker and a Trigon 80° form, the insert provides controlled chip formation even in interrupted cuts and varied cutting depths. The 1.2 mm corner radius contributes to edge stability and distributes cutting forces, reducing the risk of premature edge failure. The negative 0° relief geometry supports secure clamping and predictable cutting behaviour, making the insert suitable for heavy-duty turning where process reliability is essential. Practical benefits for shop-floor productivity The indexable design simplifies tool management by allowing rapid indexing and replacement, which supports fast changeovers and consistent repeatability. The insert’s specification is tailored for steel grades as defined by ISO group P, so machinists can select suitable cutting parameters with confidence. As a result, operators benefit from reduced setup time, better surface finish stability and more economical material removal rates compared with unoptimised grades. Where this insert brings immediate value This insert is particularly effective in production environments seeking a balance of wear resistance and versatility across common steel applications. It suits turning operations that demand steady tool life and reproducible part quality, including longitudinal turning and facing tasks on medium to heavy cuts. Combining the robust grade with proper cutting data helps to achieve repeatable results and lowers total machining cost per part. For tailored advice on integrating Walter Tools Tiger·tec Gold inserts into a production line, contact Metav Werkzeuge for application support and order processing via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: WNMG080412-MP5-WPP10G-WALTER Type: indexable turning insert Designation: WNMG080412-MP5 Full designation: WNMG080412-MP5 WPP10G Manufacturer: Walter Tools Facts Size: 08 Thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Coating / grade: Tiger·tec Gold, WPP10G Shape: Trigon 80° Suitable material group: P (steel) Grade designation: G FAQ What materials is this insert intended for? The WNMG080412-MP5 WPP10G indexable turning insert from Walter Tools is specified for ISO group P materials and is therefore optimised for a wide range of steel grades. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes predictable chip segmentation and evacuation, improving surface quality and reducing the risk of chip-related interruptions during turning. Can this insert be used for heavy cutting operations? Yes — the negative 0° relief and Trigon 80° geometry provide robust edge support, making the insert suitable for heavier cuts where stability and secure clamping are required. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, translating into longer tool life and more consistent performance in steel turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-MP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, Tiger·tec Gold coating and consistent chip control for efficient steel turning; order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMG080412-MP5 WPP20G – Trigon 80° turning insert with Tiger·tec Gold coating (Walter Tools) The WNMG080412-MP5 WPP20G is a trigon 80° turning insert designed for productive steel machining, offering a coated carbide grade optimised for predictable wear behaviour and wide material coverage. Tiger·tec Gold coated grade WPP20G Trigon 80° form for stable cutting MP5 chipbreaker for predictable chips 0° negative rake, 1.2 mm corner radius Higher productivity through optimised grade and coating The combination of Tiger·tec Gold coating and the WPP20G carbide grade delivers a balance of wear resistance and toughness tailored for steel machining. The coating reduces flank wear and thermal load during interrupted cuts, while the substrate provides toughness where chip formation is critical. For manufacturing environments seeking reduced downtime, this insert enables longer tool life and more consistent cycle times, turning the material class P (steel) into a repeatable process step with fewer interruptions. Consistent chip control and surface finish The MP5 chipbreaker and Trigon 80° geometry work together to produce controllable chip forms and stable cutting forces. The moderately large corner radius of 1.2 mm supports a robust cutting edge and improves surface integrity at finishing and semi-finishing depths. For those less familiar with tool geometry: the trigon shape provides three effective cutting corners per indexable insert, increasing tool utilisation and reducing changeover frequency while maintaining a predictable contact geometry for consistent part quality. Process security and application guidance for production Designed for a broad range within steel machining, the insert supports medium to heavy turning operations where reliable edge life and steady cutting forces are required. The 0° negative rake enhances edge stability on roughing passes and under interrupted cutting conditions, while the product family’s specifications align with common ISO P classifications. If clarification is needed on machining parameters or clamping recommendations, Metav Werkzeuge offers application assistance to match speeds, feeds and insert clamping to the specific machine and workpiece setup. For application advice or to obtain Walter Tools turning inserts such as the WNMG080412-MP5 WPP20G, contact Metav Werkzeuge for tailored recommendations and prompt handling — Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: WNMG080412-MP5-WPP20G-WALTER Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Designation: WNMG080412-MP5 Core data Corner radius: 1.2 mm Relief/rake angle: 0° (negative) Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Grade family: Tiger·tec Gold Grade/sort: WPP20G Chipbreaker: MP5 Plate form: Trigon 80° Execution: G Material application: Steel (P) FAQ What materials is this insert suitable for? The WNMG080412-MP5 WPP20G insert is specified for steel applications (ISO group P) and is optimised to handle the heat and chip characteristics typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating help performance? The Tiger·tec Gold coating on the WPP20G grade reduces flank wear and improves thermal resistance, which helps the insert maintain cutting edge integrity and consistent tool life under production conditions. Is the insert available in other corner radii or geometries? This SKU is the Trigon 80° form with a 1.2 mm corner radius; Walter Tools offers other geometries and radii in the same family for different turning strategies and edge-strength requirements. What cutting scenarios suit the 0° negative rake? The 0° negative rake is advantageous for interrupted cuts and roughing operations where edge strength and stability are prioritised over minimal cutting forces. Can the MP5 chipbreaker be used for finishing passes? The MP5 chipbreaker is designed for predictable chip control across a range of depths of cut; it supports semi-finishing and certain finishing strategies where stable chip evacuation is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer (Walter Tools).
WNMG080412-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the MP5 chipbreaker and the trigon 80° geometry for consistent performance in steel turning — order directly via Metav Werkzeuge or consult the team for application support and cutting data. WNMG080412-MP5 WPP30G Walter Tools — trigon 80° turning insert with Tiger‑tec Gold coating The WNMG080412-MP5 WPP30G is a trigon 80° indexable turning insert designed for conventional steel machining, offering a wear‑resistant coated carbide grade and a chipbreaker optimised for stable cut control Tiger‑tec Gold coating Suitable for steel (P) Trigon 80° geometry 1.2 mm corner radius Improved cycle times through controlled chip formation The combination of a dedicated MP5 chipbreaker and the Tiger‑tec Gold coating results in stable chip formation and reliable heat management during medium to heavy turning of steel. This geometry reduces unexpected tool interruptions by promoting predictable swarf behaviour, which in turn supports shorter cycle times and fewer tool changes. The coated carbide grade provides consistent edge retention under typical steel cutting temperatures, translating into more productive machining sequences and a lower cost per component in serial production. Robust grade for demanding steel applications The WPP30G grade is a coated carbide developed for machining a broad range of steel types, balancing wear resistance and toughness. This makes the insert particularly suitable for operations that require a dependable service life without sacrificing resistance to thermal or mechanical shock. Operators benefit from repeatable performance across batches, while process engineers gain a dependable baseline for developing cutting parameters for medium‑duty turning tasks. The grade is especially effective where a compromise between tool life and cutting speed is required. Geometry and dimensions that enhance repeatability The trigon 80° form with a 1.2 mm corner radius and a negative 0° rake angle provides a secure cutting edge for axially loaded turning operations. The insert’s size designation and thickness ensure compatibility with standard WNMG toolholders, enabling straightforward integration into existing tooling systems. The negative rake stabilises the cutting edge in tougher cuts, while the corner radius contributes to predictable surface finish and consistent dimensional control, important factors when repeatability is required in production environments. Practical integration and industrial usability Designed for shop floors and production lines, this indexable insert fits common clamping systems and is compatible with established turning processes for steel. The coated surface simplifies dry or minimum‑quantity lubrication strategies by reducing adhesive build‑up and wear, while the defined chip control reduces manual chip handling. For manufacturing planners, the insert represents a pragmatic choice where stable performance and straightforward process tuning are priorities rather than specialised exotic cutting strategies. For cutting data, availability and advice on integrating Walter Tools Tiger‑tec Gold inserts into existing toolbanks, contact Metav Werkzeuge for expert consultation and reliable delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: WNMG080412-MP5-WPP30G-WALTER SKU: WNMG080412-MP5-WPP30G-WALTER Name: WNMG080412-MP5 WPP30G Product type: Turning indexable insert Dimensions & core data Corner radius: 1.2 mm Insert size: 08 Thickness: 04 Geometry: Trigon 80° Rake angle: 0° (negative) Tolerance class: M Materials & special features Grade: WPP30G Series: Tiger‑tec Gold Chipbreaker: MP5 Coated carbide Suitable for: steel (P) Execution: G Brand: Walter Tools FAQ What materials is this insert intended for? The WNMG080412-MP5 WPP30G is designed primarily for machining steel (material group P) and performs well across a wide range of unalloyed and alloyed steels. How does the MP5 chipbreaker benefit production? The MP5 chipbreaker on this insert promotes stable chip formation and simpler swarf control, which improves process reliability and reduces downtime for manual chip handling. Is the insert compatible with standard WNMG toolholders? Yes, the trigon 80° form and the WNMG sizing are compatible with commonly used WNMG toolholders, allowing for easy integration into existing tooling systems. What does the Tiger‑tec Gold series deliver in terms of wear resistance? The Tiger‑tec Gold series provides a coated carbide combination that balances wear resistance and toughness, offering reproducible edge life under typical steel machining conditions. Can this insert be used for finishing and roughing operations? The geometry and 1.2 mm corner radius make the insert suitable for a range of operations from medium finishing to general turning; process optimisation may be needed for dedicated heavy roughing or fine finishing tasks. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com