ZDGT150408R-K85 WNN15 WNN15 Wendeplatten - Walter Tools
Benefit from the combination of WNN15 coated carbide, the K85 chipbreaker and a 15° clearance for reliable, productive milling with stable chip control; the insert’s 0.8 mm corner radius supports consistent surface quality and long tool life. Order the insert directly via Metav Werkzeuge or consult the specialists for application-specific advice. ZDGT150408R-K85 WNN15 milling indexable insert, 15° clearance — Walter Tools The ZDGT150408R-K85 WNN15 is a precision milling indexable insert designed for general milling tasks where consistent chip formation and robust edge retention are required Coated carbide grade WNN15 for broad material range 15° clearance angle for stable cutting 0.8 mm corner radius for precise edge control High productivity through optimised grade and chip control The coated carbide grade WNN15, combined with the K85 chipbreaker, delivers a balance of wear resistance and controlled chip formation that supports continuous production. The geometry promotes predictable cutting forces and reduced vibration, resulting in improved tool life and more repeatable process results. For operations where cycle time and process stability matter, this insert’s specification targets efficient material removal and consistent surface quality. Geometry designed for accuracy and edge stability A 15° clearance angle and a 0.8 mm corner radius contribute to a cutting edge that resists chipping while maintaining dimensional control. The insert’s inscribed circle of 15 mm and plate thickness of 4 mm provide a stable seating and heat distribution during milling cycles; the tolerance class G ensures consistent fitment in standard toolholders. These geometric choices reduce the risk of premature edge failure and support finer surface finishes when compared with more aggressive corner radii. Flexible application scope with factory-grade coating Classified as coated carbide within the Walter grade series (open series), the insert is intended for a broad range of workpiece materials — final suitability should be validated against the specific product matrix. The execution code T indicates the insert’s version within the series, and the ISO designation clarifies interchangeability with compatible tool systems. For production engineers and machinists seeking predictable performance in mixed-material batches, this insert provides a pragmatic baseline: reliable cutting behaviour with easy grade allocation. Contact Metav Werkzeuge today for tailored selection advice on Walter Tools inserts and secure the ZDGT150408R-K85 WNN15 to enhance milling performance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: ZDGT150408R-K85-WNN15-WALTER Item designation: ZDGT150408R-K85 WNN15 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Inscribed circle: 15 mm Thickness: 4 mm Tolerance class: G Chipbreaker: K85 Grade: WNN15 Special features Coating / material: coated carbide (WNN15) Series: Walter grade series – open series Execution: T Sort: WNN15 Note: Workpiece suitability to be checked against product matrix FAQ What materials can be machined with this insert? The WNN15 grade is a coated carbide intended for a broad material range; specific suitability for particular alloys must be checked against the product matrix for the ZDGT150408R-K85 WNN15 insert. How does the K85 chipbreaker affect milling performance? The K85 chipbreaker promotes controlled chip formation and evacuation, supporting stable cutting forces and reduced risk of built-up edge for consistent milling cycles. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius balances edge strength and finish quality — it enhances edge stability while allowing improved surface integrity compared with larger radii in many milling tasks. Is the insert compatible with standard toolholders? The ISO designation and the inscribed circle of 15 mm indicate compatibility with matching toolholder systems; tolerance class G supports consistent seating and interchangeability. How is the material or coating specified? The insert is specified as coated carbide under the Walter grade WNN15; the exact coating and substrate details are catalogue-dependent and listed in the manufacturer documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
ZDGT150408R-K85 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp, uncoated carbide performance and precise chip control for reliable machining of non‑ferrous materials; order the insert directly via Metav Werkzeuge or ask our consultants if needed. ZDGT150408R-K85 WXN15 Walter Tools — indexable milling insert for non‑ferrous metals, 15° relief The ZDGT150408R-K85 WXN15 is an indexable milling insert engineered for efficient machining of non‑ferrous materials such as aluminium, copper and brass. Uncoated carbide WXN15 for non‑ferrous metals K85 chipbreaker for controlled chip formation 15° relief angle with 0.8 mm corner radius Walter N‑series for consistent edge quality Sharper cutting edges that reduce material build‑up The combination of an uncoated carbide grade and a deliberately sharp geometry delivers lower adhesion when machining soft metals. The WXN15 grade is formulated for non‑ferrous applications, meaning the insert provides a clean cutting edge that reduces built‑up edge on aluminium and brass. This leads to fewer interruptions for tool dressing and more consistent part quality, which is particularly valuable in high‑mix or finishing operations. Predictable chip control for improved surface finish The dedicated K85 chipbreaker promotes controlled chip formation and evacuation, preventing long, stringy chips that can mar finishes or interfere with feeders. Together with the 15° relief angle and 0.8 mm corner radius, this geometry helps produce a stable cutting action that enhances repeatable surface quality and reduces the need for rework. In production terms, predictable chips translate into reduced cycle variability and a steadier process. Consistent performance within the Walter N‑series As part of the Walter N‑series, this indexable insert benefits from consistent manufacturing tolerances and grade selection, offering reliable edge life across batches. The uncoated design favours sharp cutting in non‑ferrous metals and supports applications where oxides or built‑up material would otherwise impair performance. The insert’s form factor and designation make it straightforward to match with common milling cutters used for precision finishing and profiling tasks. Practical application notes for efficient integration For best results, use insert clamping that secures a stable seat and check cutter run‑out before finishing passes. While the geometry suits sharp, uncoated cutting, appropriate feeds and speeds for each non‑ferrous alloy should be selected to avoid vibration and to maintain the desired surface finish. For tailored cutting data and compatibility with existing toolholders, consult Metav Werkzeuge’s technical advisors who can provide specific recommendations for process integration. Consult Metav Werkzeuge for tailored cutting data and supply of Walter Tools ZDGT150408R-K85 WXN15 indexable milling inserts to ensure optimal performance in non‑ferrous machining applications Technical data SKU: ZDGT150408R-K85-WXN15-WALTER Label: Fräswendeschneidplatte ZDGT150408R-K85 WXN15 Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Walter N‑series Grade: WXN15 (uncoated cemented carbide) Execution: T Tolerance class: G Designation: ZDGT150408R-K85 WXN15 UID: ZDGT150408R-K85-WXN15-WALTER Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 15 Thickness designation: 04 Special features Chipbreaker: K85 Material application: Non‑ferrous metals (N) — aluminium, copper, brass Geometry: Sharp, uncoated cutting edge Intended use: Milling / finishing of NE‑metals FAQ What materials is this insert designed for? The ZDGT150408R-K85 WXN15 insert is designed primarily for non‑ferrous metals such as aluminium, copper and brass, reflecting the WXN15 grade’s focus on sharp, uncoated cutting edges. Does the insert include a coating? No, the WXN15 grade is supplied as an uncoated cemented carbide insert, optimised for applications where a sharp, low‑adhesion edge is required. How does the K85 chipbreaker affect machining? The K85 chipbreaker promotes controlled chip formation and improved evacuation, which supports safer milling and a more consistent surface finish when machining softer metals. Is this insert part of a standard series for easy replacement? Yes, the insert belongs to the Walter N‑series, which offers consistent tolerances and grade characteristics to simplify tool management and replacement. Which relief angle and corner radius are specified? The insert features a 15° relief angle and a 0.8 mm corner radius, balancing sharp cutting action with edge strength for finishing and light machining tasks. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is original, brand‑new stock from the manufacturer. Manufacturer/Responsible: Walter Tools (Walter Deutschland GmbH), Derendinger Straße 53, 72072 Tübingen
ZDGT150412R-K85 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of robust edge geometry, a 15° relief angle, and the K85 chipbreaker for controlled chip formation and consistent milling performance; order directly via Metav Werkzeuge or contact their consultants for tailored application advice. ZDGT150412R-K85 ZDGT150412R-K85 WK10 milling indexable insert — 15° relief, 1.2 mm corner radius — Walter Tools A ZDGT150412R-K85 WK10 milling indexable insert for general-purpose milling, offering an open-series uncoated carbide grade and a K85 chipbreaker to support stable chip control across a broad material spectrum. 15° relief angle for versatile milling 1.2 mm corner radius for robust edges K85 chipbreaker for controlled chips Uncoated carbide WK10 for wide material range Reliable cutting results through optimised geometry The insert combines a defined 15° relief angle with a rounded 1.2 mm corner radius, yielding a stable cutting edge that reduces the risk of premature edge chipping. The geometry supports consistent cutting forces, which helps to maintain machine stability and predictability in machining cycles. For process planners, this means fewer interruptions due to unexpected edge wear and a smoother transition between roughing and semi-finishing passes. The open-series Walter cutting material provides a baseline performance typical of uncoated cemented carbide, while material suitability should be verified against the product matrix for the best match to specific workpiece alloys. Reduced downtime thanks to controlled chip formation Equipped with the K85 chipbreaker, the insert is designed to break and evacuate chips efficiently under a wide range of cutting conditions. Controlled chip formation helps to protect the tool and workpiece, minimising rework and operator intervention. The uncoated carbide grade WK10 delivers predictable wear characteristics and is suited to workflows where consistent performance is required rather than specialised coated longevity. This balance of simple, robust material and engineered chip control supports higher uptime and more stable cycle times in mixed-production environments. Practical selection advice for reliable integration The insert’s identifying codes are useful for quick cross-referencing in tool lists and procurement: the designation indicates the geometry and chipbreaker family, while the WK10 marking denotes the cutting-material class. When integrating the insert into an existing toolchain, consult the cutting-data matrix to determine optimal speeds and feeds for the chosen workpiece material; compatibility across steels and common alloys is possible but must be validated. For bespoke recommendations on feed rates or to match the insert to a specific holder or mill, technical consultation is available to ensure the component complements existing process parameters. For application recommendations or to secure supply of Walter Tools inserts such as the ZDGT150412R-K85 WK10, contact Metav Werkzeuge for expert technical consultation and ordering support. Technical data Article number: ZDGT150412R-K85-WK10-WALTER Designation: ZDGT150412R-K85 Product type: Fräswendeschneidplatte / milling indexable insert Brand: Walter Tools Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 15 Thickness code: 04 Chipbreaker: K85 Tolerance class: G Grade: WK10 Special features Cutting material: WK10 (uncoated cemented carbide) Series: Walter Schneidstoffsorte — Serie offen Execution code: T Identification: ZDGT150412R-K85 WK10 FAQ What materials is this insert suitable for? Material suitability should be checked against the product matrix; the ZDGT150412R-K85 WK10 is based on an uncoated carbide grade intended for a broad range of common alloys, but the final choice depends on the specific workpiece material. What does the K85 chipbreaker provide? The K85 chipbreaker is engineered for controlled chip formation and evacuation, improving surface quality and reducing the risk of chip-related interruptions during milling. How is the corner radius specified and what is its benefit? The insert has a 1.2 mm corner radius, which reinforces the cutting edge for robustness and smooth transition in mixed-operation milling, reducing susceptibility to notch wear. How should process parameters be chosen for this insert? Refer to the cutting-data matrix for feed and speed recommendations; when in doubt, request tailored parameters based on the specific machine, holder and workpiece to ensure optimal tool life and component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT150412R-K85 WNN15 WNN15 Wendeplatten - Walter Tools
Take advantage of the proven combination of WNN15 coated carbide and the K85 chipbreaker for reliable chip control and consistent tool life; request further advice or place an order via Metav Werkzeuge to integrate these inserts into productive milling processes. Fräswendeschneidplatte ZDGT150412R-K85 WNN15 — indexable milling insert with K85 chipbreaker and 15° relief (Walter Tools) A Fräswendeschneidplatte ZDGT150412R-K85 WNN15 designed for controlled chip formation and stable performance in general milling applications, suitable where repeatable surface quality and process reliability are required Coated carbide grade WNN15 15° relief angle for versatile milling K85 chipbreaker for consistent chips Corner radius 1.2 mm for robust cutting edge High-efficiency milling with predictable chip control The combination of the K85 chipbreaker and the WNN15 grade creates a balanced solution for efficient material removal and predictable chip flow. As a coated cemented carbide insert, the cutting edge supports sustained performance under varying cut depths and feed rates, reducing unplanned interruptions. The geometry delivers consistent chip segmentation, which helps to lower cycle times and simplifies chip handling in automated set-ups. This rational performance argument is aimed at improving process throughput while maintaining surface integrity. Coating and substrate advantages for longer life The insert’s coated carbide composition offers improved wear resistance compared with uncoated grades, enabling longer uninterrupted tool life in mixed-material environments. The WNN15 designation denotes a coated hardmetal class that provides a broad material coverage—suitable where a versatile, reliable grade is required. This technical choice reduces the frequency of indexings and replacements, supporting predictable maintenance intervals and lower total tooling costs in production. Geometry and tolerances for consistent results A 15° relief angle paired with a corner radius of 1.2 mm contributes to a robust cutting edge that tolerates moderate shock and variable feed conditions. The insert’s tolerance class G ensures dimensional consistency across batches, which is essential for fixture repeatability and accurate toolpath programming. The nominal plate size 15 and thickness 04 (as provided) ensure compatibility with standard clamping systems and cutter bodies where this insert family is specified. Practical workshop integration and application scope These indexable inserts are intended for straightforward integration into existing tooling systems and are particularly useful where balanced productivity and surface quality are priorities. The series description indicates a coated hardmetal class; users should verify the exact workpiece suitability against the product matrix when machining different steels, aluminium alloys or harder materials. The insert supports flexible programming and is suitable for a wide range of conventional milling operations where predictable chip control and consistent tool life are required. Contact Metav Werkzeuge for tailored advice on toolholder compatibility and to order Walter Tools inserts for reliable milling performance Technical Data Article number: ZDGT150412R-K85-WNN15-WALTER Label: Fräswendeschneidplatte ZDGT150412R-K85 WNN15 Walter Tools SKU: ZDGT150412R-K85-WNN15-WALTER Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 15 Thickness: 04 Tolerance class: G Special features Coated carbide grade WNN15 Chipbreaker: K85 Series: Walter Schneidstoffsorte - Serie offen Material specification: Katalogabhängig Designation without grade: ZDGT150412R-K85 FAQ What materials is this insert suitable for? The WNN15 grade is a coated hardmetal class; suitability for specific workpiece materials should be checked against the product matrix for the ZDGT150412R-K85 WNN15 insert. How does the K85 chipbreaker affect machining? The K85 chipbreaker on the ZDGT150412R-K85 WNN15 insert promotes controlled chip formation and easier chip evacuation, which supports stable cutting and consistent surface finish. Can the insert be used with standard milling cutter bodies? The insert dimensions and the thickness specification are compatible with standard clamping systems where the ZDGT150412R-K85 family is specified; verify holder compatibility before fitting. What benefits does the 15° relief angle provide? A 15° relief angle offers a compromise between strength and cutting action, giving the insert robust edge support while maintaining effective cutting geometry for a wide range of milling tasks. Is the grade WNN15 a coated grade? Yes, WNN15 is described as a coated hardmetal grade and is intended to deliver extended wear resistance compared with uncoated substrates. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names mentioned are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original and factory-new from the manufacturer.
ZDGT150412R-K85 WXN15 Wendeplatten - Walter Tools
Precise machining of non‑ferrous materials benefits from the sharp WXN15 carbide grade combined with the K85 chipbreaker and a 15° free angle for clean chip evacuation and low built‑up edge; order the insert directly via Metav Werkzeuge or contact our consultants for application support. ZDGT150412R-K85 WXN15 indexable milling insert — 15° free angle, Walter Tools A ZDGT150412R-K85 WXN15 indexable milling insert designed for high‑quality machining of non‑ferrous materials such as aluminium, copper and Messing. Uncoated solid carbide grade WXN15 15° free angle for sharp engagement 1.2 mm corner radius for edge stability K85 chipbreaker for NE‑metal machining Walter N‑series for non‑ferrous applications Consistent performance for non‑ferrous machining The combination of the uncoated carbide composition and the WXN15 grade is configured for machining NE‑metals (non‑ferrous), delivering a balance between sharpness and wear resistance. The moderate 15° free angle reduces rubbing at the cutting edge, which helps to avoid material adhesion and preserves surface finish when working with aluminium and copper alloys. This geometry supports stable cutting behaviour in light to moderate depths of cut, translating into predictable cycle times and reduced rework. Reliable chip control and edge life A dedicated K85 chipbreaker is integrated to promote controlled chip formation during shoulder milling and light pocketing operations. The controlled chip flow reduces the risk of chip jamming and improves evacuation from the tool path, which in turn enhances process reliability. The corner radius of 1.2 mm provides a compromise between edge strength and the ability to maintain sharp engagement, increasing the insert’s resistance to microchipping under intermittent cuts. Material and grade explained for easier selection The insert is manufactured in an uncoated carbide grade tailored for non‑ferrous workpieces; the absence of coating helps to maintain a razor‑sharp cutting edge and minimises heat retention when machining softer metals. For shops seeking a predictable, sharp‑edged solution for aluminium, copper and Messing, this grade offers consistent tool life and good surface integrity. The specification conforms to the Walter N‑grade series philosophy of productivity and broad material coverage. Practical application and process guidance For best results, use the insert in stable toolholders and ensure adequate chip evacuation, particularly on longer tool overhangs. The combination of the K85 chipbreaker and the 15° geometry supports higher feed per tooth values typical for non‑ferrous milling while minimising built‑up edge. When switching from coated grades, expect an initial improvement in finish on soft alloys; process windows should be validated on representative parts before full production runs. For reliable non‑ferrous machining with Walter Tools’ WXN15 grade, contact Metav Werkzeuge for tailored recommendations or to place an order — eMail: info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: ZDGT150412R-K85-WXN15-WALTER Label: Fräswendeschneidplatte ZDGT150412R-K85 WXN15 Walter Tools SKU: ZDGT150412R-K85-WXN15-WALTER Facts Free angle: 15° Corner radius: 1.2 mm Plate size: 15 mm Thickness code: 04 Tolerance class: G Special features Series: Walter N‑Sortensystem Grade: WXN15 (uncoated carbide) Chipbreaker: K85 Suitable material group: N (non‑ferrous metals) Execution: T Application: machining of aluminium, copper, Messing according to ISO 513 FAQ What materials is the ZDGT150412R-K85 WXN15 suitable for? The ZDGT150412R-K85 WXN15 insert is designed for NE‑metals, specifically aluminium, copper and Messing, where a sharp, uncoated cutting edge is advantageous. Is the WXN15 grade coated or uncoated? The WXN15 grade used in this insert is an uncoated carbide formulation optimised for sharp edges and reduced adhesion on non‑ferrous alloys. Which chipbreaker does the insert use and why? This insert features the K85 chipbreaker, which promotes controlled chip formation and reliable evacuation when milling non‑ferrous materials. What does the 15° free angle mean for machining? A 15° free angle reduces rubbing at the flank and supports a cleaner cutting action on soft alloys, enhancing surface finish and limiting built‑up edge during operations. Can the insert handle interrupted cuts? The 1.2 mm corner radius gives the insert enhanced edge stability for light interrupted cuts common in face milling and shoulder milling of non‑ferrous components. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT150416R-K85 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of WK10 uncoated carbide reliability, the K85 chipbreaker and a 1.6 mm corner radius for stable cutting performance and predictable edge life; order or request tailored advice through Metav Werkzeuge for optimal integration into production. ZDGT150416R-K85 WK10 milling insert — 15 mm, 1.6 mm corner radius | Walter Tools The ZDGT150416R-K85 WK10 is a milling insert for versatile metalworking tasks, providing consistent cutting geometry and suitability for general machining where an uncoated carbide grade is required. Uncoated carbide WK10 grade 15° clearance angle for consistent cutting 1.6 mm corner radius for robust edges K85 chipbreaker for controlled chip formation High-efficiency cutting through optimised grade and geometry The insert combines the WK10 uncoated carbide grade with a defined relief geometry to deliver repeatable performance under standard machining parameters. The uncoated carbide core offers good wear resistance in a wide range of applications, while the specified 15° clearance angle reduces rubbing and helps maintain cutting stability. These technical choices translate into measurable process benefits: predictable edge life, reduced rework and steady component quality. The design focuses on efficient material removal with controlled forces to support stable cycle times. Robust edge integrity for reliable tool life A 1.6 mm corner radius and the K85 chipbreaker work together to protect the cutting edge during interrupted cuts and moderate depths of cut. The larger corner radius increases edge strength, reducing the likelihood of chipping in transient load conditions; the K85 chipbreaker promotes short, manageable chips that clear reliably from the cutting zone. Together, these features minimise unexpected downtime caused by edge failure and support consistent surface finish quality on workpieces manufactured in serial or small-batch production. Practical material guidance and process fit The insert is manufactured in an uncoated carbide specification labelled WK10; material suitability should be checked against the product matrix for specific workpiece alloys. The combination of the K85 chipbreaker and uncoated carbide makes the insert appropriate for a broad spectrum of tasks where a neutral, versatile cutting grade is desired. For machines and setups seeking straightforward indexable solutions, the geometry supports both light finishing and general-purpose roughing operations, provided cutting data are adjusted to the work material and machine rigidity. Integration and production benefits with Walter Tools quality Choosing a geometrically consistent insert from Walter Tools brings the advantage of stable manufacturing results and easier tool management. The clear designation and repeatable tolerances support quick tool changes and predictable reconditioning cycles. Where process reliability and surface integrity matter, the described geometry and grade reduce variability; this aids downstream inspection and contributes to a smoother workflow with less scrap and fewer corrective passes. Contact Metav Werkzeuge to discuss how Walter Tools inserts such as the ZDGT150416R-K85 WK10 can be matched to specific machining tasks and to obtain tailored cutting-data recommendations Technical data Article number: ZDGT150416R-K85-WK10-WALTER Type: Milling insert Material: Catalogue-dependent Grade: WK10 Designation: ZDGT150416R-K85 WK10 Facts Clearance angle: 15° Corner radius: 1.6 Plate size: 15 Thickness code: 04 Chipbreaker: K85 Tolerance class: G Special features Uncoated carbide (WK10) Walter Schneidstoffsorte - Serie offen Series: Walter Schneidstoffsorte - Serie offen Axial/enrichment metadata available Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert in WK10 grade is an uncoated carbide designed for a range of workpiece materials; suitability should be verified against the product matrix for the specific alloy. How does the K85 chipbreaker affect machining? The K85 chipbreaker promotes controlled chip formation and evacuation, improving process stability and reducing the risk of chip-related interruptions when using the ZDGT150416R-K85 WK10 insert. What advantage does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases edge strength and resistance to chipping, supporting longer tool life and steadier surface quality during general machining operations. Is this insert suitable for finishing and roughing? The geometry and grade allow use across finishing and general-purpose roughing tasks, provided cutting data are adapted to machine capability and the workpiece material. How is the clearance angle relevant to performance? The 15° clearance angle reduces flank contact and heat generation, contributing to consistent cutting action and improved edge retention under typical machining conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT150416R-K85 WNN15 Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, robust coated carbide grade and precise geometry for productive milling operations; order or request advice via Metav Werkzeuge for availability and application support. ZDGT150416R-K85 WNN15 — Indexable milling insert, 15° clearance, R1.6 | Walter Tools The ZDGT150416R-K85 WNN15 is a coated carbide indexable milling insert engineered for general milling tasks where controlled chip formation and consistent tool life are required. Coated carbide grade WNN15 15° relief angle 1.6 mm corner radius K85 chipbreaker for stable chips Predictable chip control that keeps machines running The integrated K85 chipbreaker is designed to provide stable chip formation across varied cutting conditions, reducing interruptions from tangled chips and minimising manual intervention. The chipbreaker geometry helps to fragment chips reliably at typical milling feeds, which supports higher cutting volumes and less machine downtime. By converting process variability into consistent chip flow, the insert contributes directly to improved throughput and fewer scrap parts, delivering a clear efficiency gain for production-focused workshops. Geometry and grade for durable, repeatable performance Built on the WNN15 coated carbide grade, the insert combines wear resistance with a coating system tailored for general machining tasks. The 15° clearance ensures secure cutting edge engagement with reduced rubbing, while the 1.6 mm corner radius balances edge strength and surface finish — suitable for shoulder milling and light ramping operations. Users should verify specific workpiece-material compatibility in the product matrix, as the grade is catalogue-dependent; nonetheless, the geometry and coating work together to provide repeatable tool life and a stable cutting edge in standard applications. Integration into toolholders and production processes The insert’s nominal size and thickness align with common milling seat designs, enabling quick replacement and straightforward indexing to renew cutting edges without extensive setup. The format supports modular tooling concepts for rapid changeover, helping to shorten machine idle time and simplify inventory management. As a Walter Tools product, the component benefits from the manufacturer’s emphasis on process security and consistent edge quality, making it a practical choice where productivity and predictable results are priorities. For reliable milling performance with the Walter Tools ZDGT150416R-K85 WNN15, contact Metav Werkzeuge for technical advice and current availability via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: ZDGT150416R-K85-WNN15-WALTER SKU: ZDGT150416R-K85-WNN15-WALTER Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (indexable milling insert) Designation: ZDGT150416R-K85 ISO designation: ZDGT150416R-K85 WNN15 Grade / series: Walter Schneidstoffsorte - Serie offen, WNN15 Material specification: Katalogabhängig Facts Relief / clearance angle: 15° Corner / nose radius: 1.6 mm Plate size: 15 Plate thickness: 04 Tolerance class: G Special features Chipbreaker: K85 Coated cemented carbide grade: WNN15 Series note: Sorteneinsatz / Werkstoffeignung prüfen in Produktmatrix Geometry code: R (reverse/handed designation as per ISO coding) FAQ What is the primary advantage of the K85 chipbreaker? The K85 chipbreaker on the ZDGT150416R-K85 WNN15 promotes reliable chip control and fragmentation, reducing the risk of chip entanglement and improving process uptime. Which carbide grade is used and what does it mean for wear resistance? The insert uses the WNN15 coated cemented carbide grade; this combination offers balanced wear resistance and is suited to general milling tasks, with material-specific suitability to be checked in the product matrix. What are the key geometry parameters of this insert? Key dimensions include a 15° clearance angle and a 1.6 mm corner radius, which together support a balance between edge strength and surface finish during milling operations. Is the ZDGT150416R-K85 indexable and easy to replace? Yes, the insert is indexable and designed for quick replacement in compatible milling seats, facilitating fast tool changes and minimal machine downtime. Can this insert be used for a wide range of materials? The WNN15 grade is intended for broad application ranges; however, the exact workpiece suitability should be verified against the manufacturer’s product matrix for optimal results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is original, factory-new merchandise from the manufacturer.
ZDGT150416R-K85 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated carbide grade and a specialised K85 chipbreaker to achieve clean, productive machining of non‑ferrous metals; order directly via Metav Werkzeuge or contact our consultants for application support. ZDGT150416R-K85 WXN15 indexable milling insert for non‑ferrous metals — Walter Tools, K85 chipbreaker, 15° clearance The ZDGT150416R-K85 WXN15 is an indexable milling insert engineered for efficient machining of non‑ferrous metals such as aluminium, copper and brass, providing controlled chip formation and reliable edge performance. Sharp uncoated carbide grade WXN15 Optimised K85 chipbreaker for neat chips 15° clearance angle for reduced rubbing 1.6 mm corner radius for robust edges Faster, cleaner results on non‑ferrous materials The combination of the WXN15 uncoated carbide grade and the K85 chipbreaker is tailored for machining non‑ferrous metals, delivering a sharp cutting edge and reduced built‑up edge tendency. The insert geometry promotes predictable chip separation, which lowers rework and machine idle time. For manufacturing environments focused on throughput, this geometry supports stable cutting conditions and consistent surface quality, translating into measurable productivity gains and fewer interruptions for manual chip removal. Durable edges and process stability for series production A 1.6 mm corner radius and tolerance class G provide a balance between edge strength and finish capability, making the insert suitable for both light‑duty facing and more demanding peripheral passes. The 15° clearance minimises flank contact and heat generation at the cutting zone, which contributes to longer edge life and reduced tool change frequency. In practice, this means more reliable cycles and less variation between parts — a direct benefit for batch production and tight tolerance requirements under continuous operation. Practical application advice and compatibility Designed within the Walter N‑Sortensystem, this insert is optimised for sharp, uncoated performance on aluminium, copper and brass alloys where adhesion and gummy chips can be an issue. The sharp geometry helps avoid material sticking while the chipbreaker controls chip shape and evacuation. For best results, pair the insert with appropriately rigid tooling and moderate feed rates to exploit the cutting edge without inducing vibration; the insert’s features support improved surface finish and easier downstream handling of chips. For tailored advice on integrating the ZDGT150416R-K85 WXN15 insert into an existing toolset or for assistance placing an order, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ZDGT150416R-K85-WXN15-WALTER Label: Fräswendeschneidplatte ZDGT150416R-K85 WXN15 Walter Tools Manufacturer: Walter Tools Series: Walter N-Sortensystem Facts Clearance angle: 15° Corner radius: 1.6 mm Plate size: 15 Plate thickness: 04 Tolerance class: G Execution: T Chipbreaker: K85 Special features Grade: WXN15 (uncoated carbide) Suitability: Non‑ferrous metals (ISO group N) Sharp geometry for reduced adhesion Optimised chip control for clean chips Part designation: ZDGT150416R-K85 WXN15 FAQ Which materials is this insert intended for? The ZDGT150416R-K85 WXN15 insert is intended for non‑ferrous metals such as aluminium, copper and brass, as indicated by the WXN15 grade and the designation for ISO group N. What benefit does the K85 chipbreaker provide? The K85 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of long, tangled chips and improving process stability when machining soft, adhesive materials. How does the 15° clearance angle affect machining? A 15° clearance reduces flank rubbing and heat buildup at the cutting edge, which helps to prolong edge life and maintain consistent surface finish during longer runs. Is the insert coated? No, the WXN15 grade used in this insert is an uncoated carbide formulation, selected for sharp cutting performance and minimised material adhesion on non‑ferrous alloys. What role does the 1.6 mm corner radius play? The 1.6 mm corner radius provides a compromise between edge strength and finish quality, offering improved tool robustness for intermittent cuts while still enabling good surface results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between Metav Werkzeuge and the brands named. The item offered is an original, brand‑new product from the manufacturer.
ZDGT150420R-K85 WK10 Wendeplatten - Walter Tools
Benefit from a combination of WK10 uncoated carbide for stable chip formation and the K85 chipbreaker for consistent chip control; the 15° relief and 2 mm corner radius deliver durable cutting edges and predictable performance. Order the insert directly via Metav Werkzeuge or consult our technical team for application matching. ZDGT150420R-K85 WK10 milling indexable insert — 15° relief, K85 chipbreaker (Walter Tools) The ZDGT150420R-K85 WK10 is a milling indexable insert designed for general milling operations where stable chip formation and reliable edge life are priorities WK10 uncoated carbide grade for stable performance K85 chipbreaker optimised for reliable chip control 15° relief angle for secure cutting performance 2 mm corner radius for robust edge strength Stable chip control for increased productivity The combination of the K85 chipbreaker and the WK10 uncoated carbide grade supports consistent chip formation, which reduces unexpected interruptions and boosts throughput. The chipbreaker geometry is engineered to manage material flow at the cutting zone, lowering the risk of built-up edge and improving process reliability. For production environments seeking predictable cycle times, this insert contributes to steady productivity by helping to avoid frequent reworking or tool changes. Robust cutting edge and secure engagement in the cut A 15° relief angle paired with a 2 mm corner radius provides a balance between cutting aggressiveness and edge strength. The geometry resists chipping in interrupted cuts while maintaining a secure engagement with the workpiece, which is particularly beneficial in medium-duty milling operations. The insert’s nominal size of 15 and thickness code 04 create a stable platform when mounted in compatible indexable cutters, delivering repeatable results across batches. Practical application guidance and material considerations The WK10 grade is supplied as an uncoated cemented carbide and is suitable for a range of general-purpose milling tasks; however, material-specific suitability should be confirmed against the manufacturer’s product matrix. Where a precise material recommendation is required, consult the technical documentation to verify compatibility with specific alloys and to select cutting parameters that match the workpiece material and machining strategy. The original product series and grade information facilitate this verification. Handling, replacement and process advantages Using indexable inserts such as this one reduces downtime because worn corners can be indexed quickly, restoring cutting performance without replacing the whole toolbody. The clear geometry and standard designation simplify tool inventory management and ordering. In addition to operational efficiency, the insert supports consistent surface quality when cutting under recommended parameters, contributing to lower scrap rates and improved overall process economics. For reliable milling performance with Walter Tools' WK10 grade, contact Metav Werkzeuge for tailored advice and order support by email or phone. Technical Data Article number: ZDGT150420R-K85-WK10-WALTER SKU: ZDGT150420R-K85-WK10-WALTER Designation: ZDGT150420R-K85 WK10 Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 2 mm Insert size: 15 Thickness code: 04 Tolerance class: G Special features Grade: WK10 (uncoated cemented carbide) Chipbreaker: K85 Execution: T Material specification: Katalogabhängig ISO designation: ZDGT150420R-K85 WK10 FAQ What materials is this insert suitable for? The suitability of the ZDGT150420R-K85 WK10 milling indexable insert depends on the specific workpiece material; WK10 is an uncoated cemented carbide grade, and material compatibility should be checked in the product matrix before application. Can this insert be used for interrupted cuts? Yes, the 2 mm corner radius and the 15° relief angle give the insert improved edge robustness, making the ZDGT150420R-K85 WK10 appropriate for many interrupted milling scenarios when used with suitable parameters. Is the insert compatible with standard Walter milling cutters? The ZDGT150420R-K85 WK10 follows standard ISO designation practices; compatibility with a specific cutter body should be confirmed by matching the ISO code and insert seat type on the cutter manufacturer's specifications. How does the K85 chipbreaker affect machining? The K85 chipbreaker is designed to manage chip flow and reduce the likelihood of built-up edge, supporting consistent surface finish and process reliability when using the ZDGT150420R-K85 WK10 insert. What is the correct relief angle and why does it matter? The insert features a 15° relief, which helps balance tool life and cutting forces; the relief angle influences cutting aggressiveness and edge engagement, contributing to predictable performance. Walter Tools is a brand of Walter AG. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification purposes only and do not imply any affiliation with our company. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ZDGT150420R-K85 WNN15 WNN15 Wendeplatten - Walter Tools
Reliable chip control and a coated carbide grade combine to deliver stable, repeatable milling across a broad range of tasks; the K85 chipbreaker and 15° clearance support consistent process reliability. Order the ZDGT150420R-K85 WNN15 directly via Metav Werkzeuge or consult the team for application advice. ZDGT150420R-K85 WNN15 milling insert — 15° clearance, K85 chipbreaker | Walter Tools The ZDGT150420R-K85 WNN15 is a durable milling insert intended for productive pocketing and face milling where consistent chip formation and process stability are required. Coated carbide grade WNN15 K85 chipbreaker for chip control 15° clearance for stable cutting 2 mm corner radius for smooth finish Engineered for sustained process reliability The insert combines a coated carbide composition with the WNN15 grade to balance wear resistance and edge stability for continuous milling operations. The integrated K85 chipbreaker is designed to break chips into controllable segments, reducing the risk of recutting and supporting uninterrupted production cycles. With a 15° clearance angle, the geometry reduces cutting forces and helps maintain tool life under typical roughing and semi-finishing feeds. These technical choices contribute directly to lower downtime and higher throughput in repetitive machining contexts. Predictable surface quality and repeatability A corner radius of 2 mm supports improved surface finish on workpieces while helping to distribute cutting stresses at the edge, which enhances edge life. The declared tolerance class G contributes to interchangeability and repeatable seating in indexable toolholders, which simplifies tool changes and reduces setup variance. Together, these attributes enable consistent part quality across batches, making the insert suitable for operations where dimensional stability and repeatability are priorities. Versatile application when matched to the product matrix The cutting-grade description indicates coated hardmetal; users should verify specific material suitability against the product matrix provided by the manufacturer. The series designation highlights a Walter Tools family intended for broad applicability—however, compatibility with particular workpiece materials and machining strategies must be confirmed to achieve optimal performance. For bespoke advice on workpiece materials or feed and speed recommendations, technical consultation is available to align the insert choice to the machining task. Easy integration into production systems The ISO designation and standardised form enable straightforward indexing and replacement within existing tool systems, supporting quick changeovers and predictable cycle times. The insert’s execution code and series affiliation mean the component fits established Walter clamping systems and toolholders, aiding process standardisation. For customers seeking to reduce set-up complexity or to migrate a process to a more productive grade, support is available to assess the benefits of the insert in the given manufacturing environment. Contact Metav Werkzeuge for an application-specific recommendation or to request a tailored quotation for the Walter Tools ZDGT150420R-K85 WNN15 milling insert. Technical data Article number: ZDGT150420R-K85-WNN15-WALTER Designation: ZDGT150420R-K85 WNN15 Product type: milling insert Manufacturer: Walter Tools Numbers Clearance angle: 15° Corner radius: 2 Insert size: 15 Thickness: 04 Tolerance class: G Special features Chipbreaker: K85 Grade: WNN15 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Material: catalogue-dependent ISO designation: ZDGT150420R-K85 WNN15 FAQ What materials is this insert suitable for? The Walter Tools ZDGT150420R-K85 WNN15 is a coated carbide grade; specific material suitability should be checked against the manufacturer’s product matrix to ensure the correct match for the intended machining material. How does the K85 chipbreaker affect machining? The K85 chipbreaker on this milling insert promotes controlled chip segmentation and evacuation, which improves process reliability and reduces the chance of chip-related interruptions during milling. Can the insert be used for both roughing and finishing operations? Depending on the selected feeds and speeds and the matched toolholder, the insert’s geometry and 2 mm corner radius make it versatile for heavier roughing cuts and for semi-finishing where a good surface is required. Is this insert compatible with standard Walter toolholders? The ISO designation and execution code indicate compatibility with standard Walter toolholders designed for this insert family; confirmation of holder fitment is recommended prior to ordering. What tolerance and repeatability can be expected? The insert carries tolerance class G, which supports repeatable seating and consistent part-to-part dimensions when used in consistent toolholding systems. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ZDGT150420R-K85 WXN15 Wendeplatten - Walter Tools
Take advantage of a highly sharp, uncoated carbide geometry combined with a K85 chipbreaker and a 15° free angle to achieve consistent chip control and excellent surface quality in aluminium and other non‑ferrous materials; order directly via Metav Werkzeuge or consult our specialists for application support. ZDGT150420R-K85 WXN15 milling insert – uncoated carbide, 15° free angle (Walter Tools) The ZDGT150420R-K85 WXN15 is a milling insert designed for high‑quality machining of non‑ferrous metals, offering a sharp cutting edge and an optimised chipbreaker for reliable performance. Uncoated carbide for sharp cuts Optimised for non‑ferrous metals K85 chipbreaker for reliable chips 15° clearance and 2 mm corner radius Precision chip control for consistently clean results The indexable insert delivers consistent chip formation when machining aluminium, copper or brass thanks to the K85 chipbreaker and the sharp, uncoated cutting grade. The combination of a finely honed cutting edge and the dedicated WXN15 carbide grade reduces material adhesion and prevents built‑up edge, which in turn maintains cycle times and reduces secondary finishing. For shops seeking predictable process windows, this geometry supports steady feeds and reduces interruptions caused by poor chip evacuation. Geometry that improves surface finish and tool stability The insert’s 15° free angle and 2 mm corner radius contribute directly to a stable cutting action and a reproducible surface quality. The modest corner radius balances edge strength with the ability to produce a smooth contact zone on the workpiece, while the positive relief angle lowers cutting forces during light to medium engagement. In practice, this means fewer vibrations, a more consistent tool life and less rework — advantages that translate into measurable improvements in productivity on non‑ferrous components. Integration into production and material compatibility Produced for the Walter N‑Sortensystem, the insert is supplied in execution T and tolerance class G for predictable fit and repeatability in standard toolholders. The uncoated WXN15 grade is explicitly aimed at N‑group materials and is recommended where sharp edges and low friction are required to avoid material sticking. As an indexable solution, the component simplifies inventory management compared with solid tools and supports rapid index changes to reduce downtime, making it suitable for both jobbing shops and series production. For reliable machining of aluminium and other non‑ferrous materials, specify the Walter Tools ZDGT150420R-K85 WXN15 insert and contact Metav Werkzeuge for tailored application advice and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ZDGT150420R-K85-WXN15-WALTER SKU: ZDGT150420R-K85-WXN15-WALTER Product type: Fräswendeschneidplatte (milling insert) ISO designation: ZDGT150420R-K85 WXN15 Series: Walter N‑Sortensystem Grade: WXN15 Brand: Walter Tools Facts Plate size: 15 mm Thickness: 4 mm Free angle: 15° Corner radius: 2 mm Tolerance class: G Design / Special features Material: uncoated carbide (WXN15) Chipbreaker: K85 Suitable for: non‑ferrous metals (N) Execution: T Application focus: sharp/uncoated use for adhesion‑sensitive materials FAQ What materials is this insert best suited for? The ZDGT150420R-K85 WXN15 insert from Walter Tools is designed primarily for non‑ferrous metals such as aluminium, copper and brass, utilising a sharp uncoated grade to minimise material adhesion. Which chipbreaker should be expected and what benefit does it bring? The chipbreaker K85 is integrated on the ZDGT150420R-K85 WXN15 and provides controlled chip formation for stable machining and improved evacuation when cutting softer, adhesive materials. How does the 2 mm corner radius affect machining results? A 2 mm corner radius increases edge robustness while still allowing a fine surface finish; the geometry on this Walter Tools insert reduces vibration and promotes reproducible part quality. Is the insert compatible with standard Walter N‑series toolholders? Yes, the insert belongs to the Walter N‑Sortensystem and is intended to be used in compatible indexable holders to ensure repeatable positioning and quick indexing. What performance advantages does the WXN15 grade offer? The WXN15 grade is an uncoated carbide optimised for adhesion‑prone materials, delivering sharp edges and reliable cutting behaviour for efficient non‑ferrous machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is a recognised global manufacturer of precision cutting tools and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only. The item offered is original, brand‑new goods from the manufacturer.
ZDGT150430R-K85 WK10 Wendeplatten - Walter Tools
Take advantage of the WK10 uncoated carbide grade and the K85 chipbreaker to achieve stable chip control and consistent tool life; the 15° relief angle and 3 corner radius deliver dependable cutting engagement and edge strength. Order this milling insert via Metav Werkzeuge or consult the team for application support. ZDGT150430R-K85 WK10 milling indexable insert by Walter Tools — K85 chipbreaker, 15° relief ZDGT150430R-K85 WK10 is a precision milling insert designed for general-purpose milling with a stable chip control geometry and robust edge preparation. WK10 uncoated carbide grade K85 chipbreaker for stable chip control 15° relief angle for secure engagement 3 corner radius for enhanced edge strength Consistent productivity through controlled chip formation and robust grade selection The insert combines a K85 chipbreaker with the WK10 uncoated carbide grade to deliver reliable chip formation across a range of workpiece materials; this results in fewer interruptions for chip clearing and a steadier machining cycle. The insert’s geometry is optimised to reduce vibration and distribute cutting forces evenly, which helps to extend effective tool life and maintain dimensional stability in serial production. Practical benefits include fewer planned tool changes and improved machine utilisation, supporting leaner process planning and predictable output rates. Predictable cutting behaviour from defined geometry and clearance A defined 15° relief angle and a 3 corner radius provide predictable tool engagement and resistance to edge chipping under typical milling conditions. These geometric parameters translate into a consistent surface finish and repeatable cutting forces when paired with matching cutter bodies. The insert thickness and form support secure clamping in standard milling heads; the nominal designation indicates compatibility with holders engineered for this insert series. For process engineers this means easier parameter transfer between machines and reduced setup variability. Application guidance and process assurance for industrial use The insert is supplied as part of the Walter open series; uncoated carbide performance depends on workpiece material and cutting data, so the product matrix should be consulted to confirm suitability for specific alloys. Where material demands or surface integrity requirements increase, the uncoated grade offers predictable wear behaviour and straightforward edge reconditioning. For complex components or mixed batches, the combination of chipbreaker and grade facilitates stable machining and simplified post-process handling, which helps to reduce rework and ensure consistent production quality. Discuss cutting data and availability with Metav Werkzeuge for the Walter Tools ZDGT150430R-K85 WK10 milling insert to secure optimised process parameters and prompt delivery Technical Data Article number: ZDGT150430R-K85-WK10-WALTER Designation: ZDGT150430R-K85 WK10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WK10 Execution: T Tolerance class: G Numbers / Core Technical Data Relief angle: 15° Corner radius: 3 Insert size: 15 Thickness designation: 04 Chipbreaker: K85 Special features / Versions Uncoated carbide grade (check product matrix for suitability) Open series by Walter Schneidstoffsorte Stable chip control geometry FAQ What materials is this insert suitable for? The ZDGT150430R-K85 WK10 is an uncoated carbide insert; suitability depends on the specific workpiece material and cutting data—refer to the product matrix for exact material matches. Is the K85 chipbreaker suitable for semi-finishing and roughing operations? Yes, the K85 chipbreaker is designed for controlled chip formation that supports both semi-finishing and roughing when paired with appropriate cutting speeds and feeds for the selected material. How does the 15° relief angle affect cutting performance? A 15° relief angle improves engagement reliability and reduces rubbing at the flank, contributing to steadier cutting forces and improved surface consistency when the correct cutter body and clamping are used. Where can process data or further technical guidance be obtained? Metav Werkzeuge can provide cutting parameter recommendations and confirm compatibility with specific machine setups for the Walter Tools ZDGT150430R-K85 WK10 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the manufacturers. The offered item is original, factory-new goods of the manufacturer Walter Tools.
ZDGT150430R-K85 WNN15 Wendeplatten - Walter Tools
Combining the WNN15 coated carbide grade with the K85 chipbreaker and a 15° relief angle, this indexable milling insert delivers stable chip control and predictable tool life for milling operations. Order the ZDGT150430R-K85 WNN15 directly via Metav Werkzeuge or consult the technical team for application-specific advice. ZDGT150430R-K85 WNN15 — Indexable milling insert, 15° relief, K85 chipbreaker (Walter Tools) A ZDGT150430R-K85 WNN15 indexable milling insert designed for stable machining and controlled chip formation in general milling applications Coated carbide grade WNN15 Chipbreaker type K85 15° relief angle for stable cutting 3 mm corner radius for edge strength High productivity through optimised cutting grade and chip control The combination of the WNN15 coated carbide grade and the chipbreaker K85 is aimed at delivering consistent chip formation and reduced downtime. Coated carbide provides a balance between wear resistance and edge stability, while the K85 geometry encourages short, manageable chips that evacuate reliably. These properties result in measurable productivity gains and fewer unexpected interruptions in milling processes, making the insert a rational choice for application-driven production environments. Geometry that improves surface quality and tool life A 15° relief angle and a 3 mm corner radius contribute to a robust cutting edge that resists chipping and vibration. The inscribed circle of 15 and the thickness code 04 define a compact but sturdy form factor suited to many toolholders. Together, these geometrical details translate into improved surface finish and repeatable part quality; the modest corner radius supports both contouring and light shoulder milling while protecting the cutting edge during intermittent engagement. Practical integration and application guidance for workshops Supplied as part of the Walter cutting-grade series, the insert supports straightforward replacement and inventory management in machining shops. Material suitability is catalog-dependent; users are advised to verify the recommended workpiece classes in the product matrix before selecting cutting parameters. The insert is intended to be used where controlled chip flow and stable cutting forces are priorities. For clarification on specific materials or recommended feeds and speeds, contact the Metav Werkzeuge technical advisors who can provide tailored recommendations. Choose Walter Tools inserts from Metav Werkzeuge for reliable, high‑productivity milling — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ZDGT150430R-K85-WNN15-WALTER Label: Indexable milling insert ZDGT150430R-K85 WNN15 Walter Tools Product type: Indexable milling insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 3 mm Inscribed circle / size: 15 Thickness code: 04 Tolerance class: G Chipbreaker: K85 Special features Grade: WNN15 (coated carbide) Series: Walter cutting-grade series — open series Material specification: catalogue-dependent ISO designation: ZDGT150430R-K85 WNN15 Note: Check product matrix for material suitability FAQ What materials is this insert suitable for? Suitability is catalogue-dependent; the ZDGT150430R-K85 WNN15 is a coated carbide grade intended for general milling. Check the product matrix or contact Metav Werkzeuge for specific material recommendations. How does the K85 chipbreaker affect machining? The K85 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of built-up edge on the ZDGT150430R-K85 WNN15 insert. Which geometry specifications influence performance? Key geometries are a 15° relief angle, 3 mm corner radius, inscribed circle 15 and thickness code 04; these features support stable cutting and repeatable results in milling operations. Is this an original Walter Tools product? Yes, the ZDGT150430R-K85 WNN15 is an original Walter Tools indexable milling insert, supplied as factory-new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any commercial relationship between our company and the mentioned manufacturers. The offered article is original, factory-new merchandise of the manufacturer (Walter Tools).
ZDGT150430R-K85 WXN15 Wendeplatten - Walter Tools
Take advantage of the sharp, uncoated carbide WXN15 and the defined 15° relief angle for reliable, low-adhesion milling of non‑ferrous metals; the combination of a robust corner geometry and the Walter N‑grade system supports consistent surface quality and process stability. Order the ZDGT150430R‑K85 WXN15 milling insert directly via Metav Werkzeuge or consult the Metav team for application advice. ZDGT150430R-K85 WXN15 milling indexable insert — Walter Tools, uncoated carbide for non‑ferrous metals, 15° free angle The ZDGT150430R-K85 WXN15 is a milling indexable insert engineered for sharp, uncoated cutting in non‑ferrous materials such as aluminium, copper and brass, optimised for reduced material adhesion and consistent chip control. Uncoated carbide WXN15 for NE‑metals 15° relief angle for reduced adhesion 3 mm corner radius for robust edges Improved machining of non‑ferrous metals with reduced adhesion The WXN15 grade is an uncoated carbide specifically formulated for non‑ferrous applications (material group N). Its sharp cutting geometry and low‑friction characteristics reduce built‑up material on the cutting edge, which delivers cleaner cuts and fewer interruptions in production. For processes that require consistent surface appearance on aluminium and brass, the insert’s geometry helps to maintain stable chip formation and prevents smearing or galling that can occur with less suitable grades. Predictable tool life through defined geometry and robust edges A 15° relief angle and a 3 mm corner radius provide a balance between sharpness and edge strength. The relief angle supports low cutting forces and limits material adhesion, while the corner radius contributes to edge robustness and repeatable wear behaviour. This combination is suited to serial milling tasks where repeatability is essential and tool changes must be predictable, helping to reduce downtime and improve process efficiency. System compatibility and economical use in production Part of the Walter N‑Sortensystem, the insert fits established milling tool platforms and benefits from consistent grade selection across a family of operations. The K85 chipbreaker geometry supports stable chip evacuation in non‑ferrous metals, improving surface finish and cycle consistency. Using this insert in a coordinated tooling system reduces setup time and inventory complexity, delivering pragmatic cost efficiency for shops focused on productive machining of NE‑materials. Rely on Metav Werkzeuge for expert advice on Walter Tools milling inserts — request availability or application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ZDGT150430R-K85-WXN15-WALTER Article label: Fräswendeschneidplatte ZDGT150430R-K85 WXN15 Walter Tools ISO designation: ZDGT150430R-K85 WXN15 Grade: WXN15 (uncoated carbide) Series: Walter N‑Sortensystem Facts Relief angle: 15° Corner radius: 3 Insert size: 15 Thickness code: 04 Tolerance class: G Special features Chipbreaker: K85 Execution: T Material designation: N (non‑ferrous metals) Intended application: NE‑metals such as aluminium, copper, brass Uncoated, sharp edge geometry for low adhesion FAQ What materials are best suited for this insert? The ZDGT150430R‑K85 WXN15 insert (Walter Tools milling indexable insert) is intended for non‑ferrous metals — aluminium, copper and brass are specifically targeted by the WXN15 grade. Is the grade coated or uncoated? The WXN15 grade used in this insert is uncoated carbide, optimised for sharp edges and reduced material build‑up in NE‑materials. What does the K85 chipbreaker offer? The K85 chipbreaker on the insert supports controlled chip formation and evacuation when machining non‑ferrous metals, improving surface finish and process stability with the ZDGT150430R‑K85 WXN15. How does the 15° relief angle affect machining? A 15° relief angle lowers the tendency for material adhesion at the flank and reduces cutting forces in soft, ductile materials, which benefits surface quality and tool life when using this milling insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected trademarks are mentioned for explanatory purposes only and do not imply any association between Metav Werkzeuge and the respective brands. The offered product is original, factory‑new merchandise from the manufacturer.
ZDGT150440R-K85 WK10 T Wendeplatten - Walter Tools
Take advantage of the robust combination of the WK10 uncoated carbide substrate, the K85 chipbreaker and a 15° relief angle for stable cutting and consistent chip control; order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. ZDGT150440R-K85 WK10 milling insert — K85 chipbreaker, 15° relief angle (Walter Tools) The ZDGT150440R-K85 WK10 is a milling insert designed for reliable chip control and predictable wear behaviour in diverse machining tasks. Open-series WK10 uncoated carbide K85 chipbreaker for consistent chip control 15° relief angle for robust cutting performance Increased process reliability through stable geometry The combination of the WK10 uncoated carbide grade and the K85 chipbreaker delivers a predictable cutting behaviour that supports stable production cycles. The insert’s measured relief angle of 15° reduces rubbing and ensures the cutting edge engages cleanly with the workpiece, which in turn lowers heat generation and helps maintain dimensional accuracy. For production-oriented environments, this balance of edge stability and chip control reduces unexpected tool changes and contributes to a more economical machining process. Clear material and grade information for correct selection As an uncoated carbide option, the insert is specified as WK10, an open-series grade intended for general machining tasks; customers should verify the concrete material matrix for exact suitability. The K85 chipbreaker is tailored to produce short, controllable chips in a wide range of materials, improving machining safety and surface finish. The plate’s measured corner radius and relief geometry favour robust engagement over aggressive finishing, making the insert a pragmatic choice where repeatable performance is required. Practical benefits on the shop floor and setup efficiency With a compact plate size and defined corner geometry, changeovers are straightforward and run-in is predictable. The design supports consistent chip evacuation when combined with appropriate cutting parameters, lowering the risk of built-up edge and minimising rework. Maintenance routines benefit from the uncoated carbide substrate’s straightforward inspection: operators can assess flank wear and make timely decisions about indexation or replacement, contributing to reduced machine downtime. Guidance for application and tool pairing When pairing the insert with milling cutters, select holders that match the plate footprint and allow secure clamping to exploit the 4 mm corner radius and the specified plate thickness. For general workshops and jobbing environments, this insert is a versatile option where balanced performance and reliable edge-life are priorities. For optimised results, consult the product matrix to confirm WK10 suitability for the target material and cutting conditions. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to discuss suitable cutter bodies or parameter recommendations — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: ZDGT150440R-K85-WK10-WALTER SKU: ZDGT150440R-K85-WK10-WALTER Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Grade: WK10 Chipbreaker: K85 Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 4 mm Plate size: 15 mm Plate thickness: 04 Tolerance class: G Special features Uncoated carbide substrate (open series) Designation: ZDGT150440R-K85 ISO designation: ZDGT150440R-K85 WK10 Execution: T Material specification: Katalogabhängig FAQ What materials is this insert suitable for? The insert in WK10 grade is an uncoated carbide option; material suitability should be checked against the product matrix to confirm which workpiece materials are recommended for the ZDGT150440R-K85 WK10 insert. How does the K85 chipbreaker affect machining? The K85 chipbreaker is designed for consistent chip formation and evacuation, reducing the likelihood of long, tangled chips and improving process stability when using the ZDGT150440R-K85 WK10. What are the key dimensions to check when selecting a holder? Check the plate size (15 mm), corner radius (4 mm) and plate thickness (04) to ensure correct seating and clamping for the milling insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT150440R-K85 WNN15 WNN15 Wendeplatten - Walter Tools
Combining the WNN15 coated carbide grade with the K85 chipbreaker and a 15° relief, the insert offers stable chip formation and consistent surface quality for productive milling. Order the ZDGT150440R-K85 WNN15 directly via Metav Werkzeuge or contact our advisers for application-specific guidance. ZDGT150440R-K85 WNN15 indexable milling insert – 15° relief, K85 chipbreaker | Walter Tools ZDGT150440R-K85 WNN15 is an indexable milling insert engineered for productive general milling where reliable chip control and predictable tool life are required Coated carbide grade WNN15 for broad materials K85 chipbreaker for consistent chip control 15° relief angle for stable cutting 4 corner radius for robust edge strength Consistent chip control for higher throughput The combination of the K85 chipbreaker and the WNN15 coating creates stable chip formation, which reduces interruptions from chip jamming and improves cycle times. The chip geometry is designed to break and evacuate chips predictably under normal milling parameters. For manufacturers seeking reduced downtime and steadier removal rates, this geometry translates into fewer operator interventions and a more continuous production flow. The insert’s cutting geometry supports smooth engagement and exit from interrupted cuts, helping to maintain surface finish and part tolerances. Coating and substrate for reliable tool life A coated carbide substrate provides the balance between edge stability and wear resistance needed for mixed-shop environments. The WNN15 grade is optimised as a versatile coated carbide solution; it aims to deliver a predictable wear pattern and resistance to abrasion across a range of workpiece materials. Combined with the 15° relief angle, the insert maintains a consistent cutting edge condition during milling, which in turn helps to reduce the frequency of index changes and maintain production consistency. This results in lower tool management overhead and more repeatable component quality. Geometry and robustness for secure machining The insert’s corner radius 4 and plate geometry increase edge strength and resistance to chipping in moderate interrupted cuts. The nominal plate size and thickness provide stable clamping in standard milling cutters, while the specified tolerance class supports interchangeability within the same tool family. When selecting cutting parameters, matching feed and speed to the K85 chip control characteristics will deliver the best compromise between metal removal rate and surface quality. For new applications, start with conservative feeds and increase until the desired removal rate and finish are achieved. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and to ensure optimal cutting data for specific applications; eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: ZDGT150440R-K85-WNN15-WALTER Designation: ZDGT150440R-K85 ISO designation: ZDGT150440R-K85 WNN15 Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 4 Plate size: 15 Plate thickness: 04 Tolerance class: G Special features Coating / grade: WNN15 (coated carbide) Chipbreaker: K85 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material data: Katalogabhängig FAQ What materials is this insert suitable for? The ZDGT150440R-K85 WNN15 insert is supplied as a coated carbide grade and its WNN15 matrix is designed for broad material coverage; check the product matrix for exact workpiece compatibility. How does the K85 chipbreaker affect performance? The K85 chipbreaker provides consistent chip control and improved evacuation, reducing stoppages and supporting higher effective machining throughput with the Walter Tools insert. What is the purpose of the 15° relief angle? A 15° relief angle helps to maintain a stable cutting action and reduces rubbing at the flank, contributing to improved surface finish and longer usable edge life for this indexable insert. Can the corner radius be changed for different applications? This insert features a corner radius of 4; changes to radius are achieved by selecting an alternative insert geometry rather than modifying this specific item. Is the ZDGT150440R-K85 WNN15 compatible with standard milling cutters? The insert is intended for use in compatible indexable milling cutter systems that accept its designation; ensure correct seat and clamp specification when installing the insert. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned only for explanation and identification purposes; no affiliation or endorsement by the brand owners is implied. The offered item is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ZDGT150440R-K85 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp, uncoated carbide cutting geometry, reliable K85 chip control and compatibility with the Walter N-System for efficient machining of non-ferrous materials; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. ZDGT150440R-K85 WXN15 milling insert — Walter Tools, sharp uncoated grade for non-ferrous metals, 15° relief ZDGT150440R-K85 WXN15 is an indexable milling insert designed for high-quality finishing and productive cutting of non-ferrous materials within the Walter N-System Uncoated solid carbide grade WXN15 Optimised for non-ferrous metals (N) 15° relief angle for smooth cutting 4 mm corner radius for enhanced stability Precise, sharp geometry for cleaner cuts and fewer built-up edges The ZDGT150440R-K85 WXN15 insert features an uncoated carbide composition specifically developed for machining non-ferrous metals such as aluminium, copper and brass. The sharply honed cutting edge reduces material adhesion and improves surface finish, while the K85 chipbreaker directs swarf reliably away from the toolpath. This combination delivers reduced cycle times and a lower risk of build-up on the edge, especially in finishing passes where precision and repeatability matter. Consistent chip control and dependable edge life for productive series work The insert’s geometry, including a 15° relief angle, supports gentle entry and exit from the cut, which minimises impact forces and helps maintain a consistent cutting edge. The K85 chipbreaker is optimised for non-ferrous alloys to avoid long, stringy chips and to encourage predictable chip formation. As a result, the toolholder and fixture loads remain stable, cutting forces are more uniform and rework due to surface contamination is reduced, improving overall process reliability. System compatibility and practical benefits for workshop use Designed for integration with the Walter N-System, this insert suits users seeking quick indexability and straightforward tool management. The 4 mm corner radius provides form stability for interrupted cuts and light profiling, while the tolerance class G ensures dimensional consistency across multiple index changes. Together these features support reproducible results in small- to medium-batch production, delivering both operational ease and improved part quality. Ask Metav Werkzeuge for specific application recommendations on the Walter Tools ZDGT150440R-K85 WXN15 insert and secure optimised machining performance with the Walter N-System Technical Data Article number: ZDGT150440R-K85-WXN15-WALTER Designation: ZDGT150440R-K85 WPL designation: ZDGT150440R-K85 WXN15 Manufacturer: Walter Tools Series: Walter N-Sortensystem Facts Relief angle: 15° Corner radius: 4 mm Inscribed circle: 15 mm Thickness code: 04 Tolerance class: G Special features Uncoated carbide grade WXN15 Chipbreaker: K85 Application group: N (non-ferrous metals) Execution: T Optimised for sharp-edge, uncoated use Suitable for finishing and light profiling FAQ What materials is this insert intended for? The ZDGT150440R-K85 WXN15 insert is designed for non-ferrous metals (ISO group N) such as aluminium, copper and brass, where sharp, uncoated edges reduce material adhesion. Is the insert coated or uncoated? This grade is an uncoated carbide type (WXN15), chosen to preserve a very sharp cutting edge for NE-metal applications. How does the K85 chipbreaker affect machining? The K85 chipbreaker promotes short, controllable chips in non-ferrous alloys, improving chip control and reducing the chance of surface contamination from built-up edge. Can this insert be used in the Walter N-System toolholders? Yes, the insert is manufactured for compatibility with the Walter N-System, enabling rapid indexability and consistent positioning in modular tool systems. What dimension ensures form stability during interrupted cuts? The 4 mm corner radius provides enhanced edge strength and form stability, particularly useful in interrupted or light profiling operations. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT15A404R-K85 WMG40 T Wendeplatten - Walter Tools
Take advantage of a coated carbide grade (WMG40) that delivers wear resistance and stable edge life together with a K85 chipbreaker and a 15° relief angle for predictable finishing performance. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ZDGT15A404R-K85 WMG40 Fräswendeschneidplatte (milling indexable insert) – 15° relief, 0.4 mm corner radius – Walter Tools The ZDGT15A404R-K85 WMG40 is a coated carbide milling insert designed for versatile finishing and semi-finishing operations, combining a controlled chipformer with a low-relief geometry for consistent surface quality. Coated carbide grade WMG40 15° relief angle for finishing 0.4 mm corner radius for accurate edges K85 chipbreaker for controlled chips Longer tool life through optimised carbide and coating The choice of WMG40, a coated carbide grade, is aimed at increasing tool life under mixed cutting conditions. The coating supports wear resistance and thermal stability so that flank wear develops more slowly; this results in longer intervals between index changes and fewer unscheduled tool changes. For procurement planning, the combination of a robust substrate and surface engineering enables consistent part quality over extended cycles, reducing rework and downtime. Material suitability is determined by the product matrix and should be checked for specific workpiece alloys. Stable machining and predictable chip formation The built-in K85 chipbreaker and the 15° relief geometry work together to produce short, controllable chips and to reduce cutting forces during finishing passes. A 0.4 mm corner radius supports accurate edge definition and improved surface finish on shoulder and face milling operations. Technically, the chipbreaker profile interrupts and shapes the swarf while the relief angle minimises rubbing at the cutting edge, which together enhance process stability and allow higher feed rates with maintained surface quality. This results in safer toolpaths and more reproducible cycle times in series production. Practical notes for application and process integration The insert is supplied in the standard designation ZDGT15A404R-K85 WMG40 and in a plate thickness specification A4; the actual material variants are listed as catalogue-dependent and should be verified against the workpiece material. The series is identified as an open Walter grade, prioritising broad applicability across several machining tasks. For customers seeking to integrate this insert into existing toolholders and milling systems, checking the insert seat geometry, torque values for clamp screws and recommended cutting data in the tool matrix will ensure optimum performance. For detailed process data and tailored cutting parameters, refer to the product matrix or contact our technical advisors who can provide recommended feeds and speeds based on the workpiece and machine stability. Request tailored cutting parameters and availability from Metav Werkzeuge for Walter Tools inserts — our consultants will advise on the best WMG40 application and supply the ZDGT15A404R-K85 insert to meet production needs. Contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ZDGT15A404R-K85-WMG40-WALTER Product designation: ZDGT15A404R-K85 WMG40 Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Grade: WMG40 Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 15 mm Special features Coated carbide (WMG40) Chipbreaker: K85 Plate thickness/type: A4 Execution: T Tolerance class: G Material designation: catalogue-dependent Series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suitable for? The WMG40 grade is a coated carbide intended for a broad range of materials; suitability must be verified in the product matrix for the specific workpiece alloy before application. How does the K85 chipbreaker affect milling performance? The K85 chipbreaker shapes and breaks chips to improve swarf control and process reliability, which in turn supports safer cutting conditions and consistent surface finishes with the ZDGT15A404R-K85 WMG40 insert. Which operations benefit most from the 15° relief angle and 0.4 mm corner radius? Finishing and light semi-finishing passes benefit from the 15° relief and the 0.4 mm corner radius, offering improved edge stability and finer surface quality on shoulder and face milling. What information is needed to select the correct feed and speed? Machine power, rigidity, workpiece material and the intended depth of cut are required; Metav Werkzeuge can provide recommended cutting data for the ZDGT15A404R-K85 WMG40 based on these parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
ZDGT15A408R-K85 WMG40 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide reliability, precise geometry and controlled chip formation for predictable tool life and efficient milling cycles; order directly via Metav Werkzeuge or contact the technical team for application advice. ZDGT15A408R-K85 WMG40 milling indexable insert — 15° relief, R0.8, Walter Tools The ZDGT15A408R-K85 WMG40 is a coated carbide milling indexable insert engineered for consistent chip evacuation and repeatable edge performance in general milling applications where process stability is required. Coated carbide grade WMG40 15° relief angle 0.8 mm corner radius K85 chipbreaker Designed for stable, repeatable milling performance The insert offers a coated carbide composition in the WMG40 grade, tailored to provide a balance between wear resistance and edge robustness. The 15° relief supports reliable entry and exit behaviour in a broad range of milling operations, while the R0.8 corner radius contributes to a stronger cutting edge and predictable surface finish. These geometry choices reduce the need for frequent index changes and support longer uninterrupted machining runs, delivering tangible gains in throughput and tool utilisation. Controlled chips and fewer process interruptions A dedicated K85 chipbreaker promotes effective chip control across varying cut conditions, lowering the risk of recutting and machine downtime. The insert’s chipforming characteristics are particularly useful in mixed-production environments where quick changeovers and consistent evacuation are essential. By combining an engineered chipbreaker with the WMG40 cutting material, the solution aims to maintain stable cutting forces and reduce unexpected cycle variations, which benefits both single-piece and serial production. Clear specification for integration and planning Key specification details — A4 thickness, tolerance class G and the ISO designation — make integration into toolholders and process documents straightforward. The standardised dimensions enable predictable seat fit and clamping behaviour, simplifying tool assembly and logistics. For workpiece material selection, the WMG40 grade’s suitability should be verified against the manufacturer’s product matrix to ensure optimal performance for the intended application. Practical advice for selection and use When choosing an insert for a specific milling task, consider the intended material, desired surface quality and machine rigidity. The combination of WMG40 chemistry, K85 chipbreaker and the defined geometry supports a wide spectrum of milling tasks, but verifying cutting data and recommended feed/speed ranges with technical documentation avoids performance surprises. For application-specific recommendations, the supplier can provide machining data and compatibility guidance to match the insert to the operation. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts and to arrange immediate supply of the ZDGT15A408R-K85 WMG40 insert for your production needs. Technical data SKU: ZDGT15A408R-K85-WMG40-WALTER Article designation: ZDGT15A408R-K85 WMG40 Product type: Milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 15 mm Thickness: A4 Tolerance class: G Special features Coating / grade: WMG40 (coated carbide) Chipbreaker: K85 Execution: T Material specification: catalogue dependent Note: Verify workpiece suitability using the product matrix FAQ What edge geometry does the insert feature? The insert features a 0.8 mm corner radius and a 15° relief angle, which are chosen to balance edge strength and entry behaviour for milling operations with the WMG40 grade. Which chip control solution is integrated? This milling insert is equipped with the K85 chipbreaker to promote reliable chip formation and evacuation under varying cutting conditions. Is WMG40 suitable for all materials? The WMG40 grade is a coated carbide formulation; suitability for specific materials should be checked in the product matrix and technical documentation before application. How is the insert specified for toolholding? Dimensions such as 15 mm plate size, A4 thickness and tolerance class G are standardised to support consistent seating and clamping in compatible toolholders. Can the insert be used for heavy roughing? The geometry and chipbreaker aim to provide robustness, but recommended cutting parameters and the workpiece material must be verified to confirm suitability for heavy roughing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT15A412R-K85 WMG40 WMG40 Wendeplatten - Walter Tools
Take advantage of a coated-carbide WMG40 grade combined with a K85 chipbreaker and a 1.2 mm corner radius for stable chip control and reliable edge life; order directly via Metav Werkzeuge or contact our consultants for application advice. ZDGT15A412R-K85 WMG40 ZDGT15A412R-K85 — Milling Insert by Walter Tools The ZDGT15A412R-K85 WMG40 is a coated carbide milling insert designed for versatile milling tasks where consistent chip control and reproducible cutting performance are required. WMG40 coated carbide grade for stability K85 chipbreaker for reliable chip control 1.2 mm corner radius for durable edges 15° clearance angle for smooth cutting Boost throughput with stable cutting performance The insert uses the WMG40 coated-carbide grade, paired with the K85 chipbreaker, to support steady material removal with improved chip control. The combination of chip geometry and coating is designed to reduce vibrations and enable higher feed rates in suitable operations, which translates into a measurable increase in process efficiency. The included 15° clearance angle helps to maintain a consistent cutting engagement and reduces rubbing at the flank, so surface irregularities are minimised and tool life is extended. Achieve consistent surface quality and extended edge life A 1.2 mm corner radius provides a stronger cutting edge that resists chipping under interrupted cuts and rough conditions. The coated carbide construction offers enhanced wear resistance, which reduces the need for frequent index changes and keeps part tolerances stable over longer cycles. As a result, finishing passes require less rework and the number of tool changes is lowered, supporting predictable production rhythms in milling applications. Practical guidance for selection and reliable machining Material suitability and exact cutting conditions are catalog-dependent; the product matrix should be consulted to match the insert to the workpiece and the machine’s capabilities. The indexable insert format makes it straightforward to replace worn corners without resetting the toolholder, and the steel-compatible geometry is intended for flexible use across a wide range of milling tasks. For process planning, consider the interaction of feed, cutting speed and the insert’s chipbreaker to ensure optimal chip evacuation and surface integrity. Contact Metav Werkzeuge for tailored advice on Walter Tools milling inserts (ZDGT15A412R-K85 WMG40), availability and application recommendations — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ZDGT15A412R-K85-WMG40-WALTER SKU: ZDGT15A412R-K85-WMG40-WALTER Product type: Milling insert Manufacturer: Walter Tools Designation: ZDGT15A412R-K85 WMG40 Core data Relief angle: 15° Corner radius: 1.2 mm Size: 15 mm Thickness: A4 Chipbreaker: K85 Tolerance class: G Execution: T Materials & features Grade: WMG40 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Material/coating: catalog-dependent (check product matrix) Application: milling (indexable insert) FAQ What cutting tasks is this insert designed for? This milling insert in the ZDGT15A412R-K85 WMG40 specification is intended for general milling operations where controlled chip formation and robust edge life are required. How does the K85 chipbreaker influence performance? The K85 chipbreaker on the WMG40 grade promotes consistent chip control and evacuation, which supports stable cutting and reduces the risk of re-cutting chips in the milling process. What does the 1.2 mm corner radius mean for component quality? A 1.2 mm corner radius increases edge strength and helps maintain surface finish under variable cutting conditions, reducing the frequency of edge damage and the need for rework. Is the WMG40 grade suitable for all materials? The WMG40 grade is a coated carbide class; final workpiece suitability should be verified via the product matrix to ensure the correct match for the specific material and cutting conditions. How should the insert be specified when ordering replacements? Specify the full designation ZDGT15A412R-K85 WMG40 and the Walter Tools brand to ensure correct replacements and consistent batch properties. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ZDGT15A416R-K85 WMG40 Wendeplatten - Walter Tools
The combination of a coated carbide WMG40 grade, a K85 chipbreaker and a compact geometry delivers stable chip control and long tool life for productive milling operations; order directly via Metav Werkzeuge or consult the technical team for application advice. ZDGT15A416R-K85 WMG40 — indexable milling insert, 15° clearance, 1.6 mm radius — Walter Tools The ZDGT15A416R-K85 WMG40 is an indexable milling insert designed for general milling applications where consistent chip control and repeatable surface quality are required Coated carbide grade WMG40 15° clearance angle for versatile milling 1.6 mm corner radius for precision K85 chipbreaker for stable chip control Reliable performance for productive milling The indexable milling insert combines a coated carbide base (grade WMG40) with a dedicated K85 chipbreaker, producing a balance between wear resistance and predictable cutting behaviour. Because the insert is engineered with a 15° clearance angle, it suits a wide range of peripheral and face-milling operations while reducing cutting forces. The result is a component that supports continuous production by offering consistent tool life and reproducible surface finish, which helps to maintain cycle time targets and reduce downstream rework. Predictable chip control and surface quality A defined chipformer such as the K85 chipbreaker helps to shape and evacuate chips efficiently, which improves process stability in both intermittent and continuous cuts. The 1.6 mm corner radius contributes to strength at the cutting edge and reduces the risk of chipping under varying loads, leading to a more uniform workpiece finish. In practical terms, this means fewer unexpected interruptions for edge changes and a lower likelihood of tool-related surface defects — a clear benefit for batch production and mixed-series machining. Broad material suitability and process security The cutting grade WMG40 is a coated cemented carbide formulation intended to offer a broad material coverage; compatibility should be checked against the specific workpiece material matrix in each application. The insert’s geometry and coating combination promote reliable cutting across common industrial substrates, and the A4 thickness provides structural stability under higher feed rates. For engineers seeking predictable machining outcomes, the insert’s design reduces trial-and-error setup time and supports steady, repeatable results on compatible machining centres. Integration into the tool system and handling benefits With the ISO designation clearly specified and a standardised shape, the insert is straightforward to index and replace, contributing to a fast tool change process and minimal machine downtime. The defined tolerance class G ensures interchangeability within the same tool family, while the compact size facilitates flexible toolholder selection for both finishing and semi-finishing passes. Overall, the component supports a cost-conscious production flow by combining durability with straightforward maintenance routines. Contact Metav Werkzeuge for application advice on Walter Tools milling inserts and quote SKU ZDGT15A416R-K85-WMG40-WALTER when enquiring Technical data Article number: ZDGT15A416R-K85-WMG40-WALTER Designation: ZDGT15A416R-K85 WMG40 Product type: Indexable milling insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 15° Corner radius: 1.6 mm Plate size: 15 mm Thickness: A4 Tolerance class: G Special features Grade: WMG40 (coated carbide) Chipbreaker: K85 Execution: T Material specification: Katalogabhängig ISO designation: ZDGT15A416R-K85 WMG40 FAQ What materials is this milling insert suitable for? The ZDGT15A416R-K85 WMG40 milling insert is designed for broad material coverage; the WMG40 matrix is a coated carbide grade suitable for a range of steels and common alloys, but final suitability should be verified against the specific workpiece material matrix. How does the K85 chipbreaker improve machining? The K85 chipbreaker shapes chips to aid evacuation and reduce entanglement, which enhances process stability and helps maintain a consistent surface finish when using the ZDGT15A416R-K85 WMG40 insert from Walter Tools. What does the 15° clearance angle mean in practice? A 15° clearance angle reduces rubbing at the flank face and lowers cutting forces in many milling scenarios, enabling the insert to be used for versatile peripheral and face-milling tasks with reliable edge life. Is the insert compatible with standard toolholders? The ISO designation and tolerance class G make the insert compatible with standard indexable milling toolholders designed for this geometry; the A4 thickness contributes to stable clamping and repeatable positioning. Why is the 1.6 mm corner radius important? A 1.6 mm corner radius increases edge strength and improves surface integrity during semi-finishing and finishing passes, lowering the likelihood of corner chipping and improving component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT15A420R-K85 WMG40 WMG40 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide WMG40, precise 15° clearance and the K85 chipbreaker for predictable chip control and sustained edge life. Benefit from the robust 2 mm corner radius and tolerance class G to maintain process security in series production. Order the ZDGT15A420R-K85 WMG40 directly via Metav Werkzeuge or ask the consultants for application advice. ZDGT15A420R-K85 WMG40 — Indexable milling insert, 15° clearance, K85 chipbreaker (Walter Tools) ZDGT15A420R-K85 WMG40 is a coated carbide indexable milling insert intended for versatile milling tasks; it combines a 15° clearance angle with a K85 chipbreaker for controlled swarf evacuation. Coated carbide grade WMG40 15° clearance angle for smooth cutting K85 chipbreaker for stable chip control 2 mm corner radius for robust edge life Consistent cutting performance for reliable cycle times The WMG40 grade is a coated carbide designed to offer a balanced combination of wear resistance and toughness. With a 15° clearance the geometry reduces rubbing on the flank face and helps maintain cutting stability, which is particularly relevant in peripheral milling or interrupted cuts. The integrated K85 chipbreaker supports controlled chip formation, lowering the risk of built-up edge and helping to keep tool-change intervals predictable. These features contribute directly to shorter non-productive time and improved process reliability without sacrificing surface quality. Guidance on applications and material suitability Material suitability for this insert is catalogue-dependent and should be verified against the product matrix provided for the WMG40 family. The insert’s open series designation means it is intended for a broad range of tasks within the limits of the defined grade; however, confirmation for specific alloys and hardness levels is recommended. Technical advisors can provide cutting data and adapt parameters to the machining centre in use. This approach enables a tailored balance between cutting speed, feed and tool life, offering cost-effective productivity for batch and continuous operations. Precision design that supports repeatable results A 2 mm corner radius delivers a compromise between edge strength and form accuracy, improving resistance to chipping during indexed operations. The insert is manufactured to tolerance class G, providing dimensional consistency for fixture-based processes and automated tool changers. The specified A4 thickness and execution code T ensure compatibility with common milling cutter bodies that accept this insert family. Together, these design details support reproducible part quality and help to reduce scrap rates in high-volume production. Contact Metav Werkzeuge for application support and to confirm suitability of the Walter Tools ZDGT15A420R-K85 WMG40 for specific materials and machining conditions — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ZDGT15A420R-K85-WMG40-WALTER ISO designation: ZDGT15A420R-K85 WMG40 Product type: Indexable milling insert Facts Clearance angle: 15° Corner radius: 2 mm Insert size: 15 Thickness: A4 Tolerance class: G Special features Grade: WMG40 (coated carbide) Chipbreaker: K85 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material: Catalogue-dependent FAQ What materials is this insert suitable for? The material suitability for the ZDGT15A420R-K85 WMG40 must be checked against the manufacturer’s product matrix; the WMG40 grade is a coated carbide designed for a wide range of tasks but specific alloys require confirmation. How does the K85 chipbreaker improve machining? The K85 chipbreaker on the ZDGT15A420R-K85 WMG40 promotes consistent chip formation and evacuation, which reduces built-up edge and helps to maintain stable cutting conditions during milling. What does the 15° clearance angle mean for cutting performance? A 15° clearance angle reduces flank contact and improves cutting stability, contributing to better surface finish and lower frictional heat during milling with this insert. Is the insert compatible with standard cutter bodies? The ZDGT15A420R-K85 WMG40 is designed to fit cutter bodies that accept the corresponding ISO designation and A4 thickness; verify seat compatibility and clamping specifications with the toolholder documentation. Where can cutting data for this insert be obtained? Cutting data and application guidance for the ZDGT15A420R-K85 WMG40 are available from Metav Werkzeuge or directly from the Walter Tools technical documentation; consult the product matrix for recommended speeds and feeds. Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation; there is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ZDGT15A430R-K85 WMG40 K85 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide WMG40, a K85 chipbreaker and a 15° relief angle for stable, productive milling cycles; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. ZDGT15A430R-K85 WMG40 milling indexable insert — coated carbide, K85 chipbreaker — Walter Tools ZDGT15A430R-K85 WMG40 is an indexable milling insert for general milling operations where controlled chip formation and reliable edge life are required Coated carbide grade WMG40 for broad materials 15° relief angle for stable cutting 3 mm corner radius for robust edge life K85 chipbreaker for controlled swarf Stable chip control for consistent process results The combination of the K85 chipbreaker and a coated substrate is designed to deliver reliable chip control and repeatable cutting conditions. In practice this means fewer interruptions for swarf management and a smoother material flow in the machining zone, which increases productive machining time. The specified chip geometry favours short, predictable chips on a wide range of workpiece materials; this behaviour is especially valuable in setup-sensitive production runs where consistent cycle times are required. Durable cutting performance with predictable wear A coated carbide grade such as WMG40 provides a balance between wear resistance and toughness that supports long tool life under mixed cutting conditions. The coating and substrate pairing is intended to improve edge life and maintain dimensional accuracy over extended tool paths. The insert’s 3 mm corner radius also contributes to a robust cutting edge that tolerates intermittent contact and minor deviations, thereby reducing the need for frequent insert changes and supporting higher overall equipment effectiveness. Designed for integration into versatile milling processes The 15° relief and A4 thickness are engineered to fit common milling holders while offering stability during transverse and axial loads. As an indexable insert, this component can be rotated or replaced quickly to restore cutting performance, which reduces machine downtime. The product is supplied under the Walter Tools range and is recommended where a coated, general-purpose carbide solution with controlled swarf behaviour is preferred. For best results, the product matrix supplied by the manufacturer should be consulted to confirm suitability for specific materials and cutting conditions. Contact Metav Werkzeuge for an application review and a tailored quotation for the Walter Tools ZDGT15A430R-K85 WMG40 milling insert; technical consultants are available by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: ZDGT15A430R-K85-WMG40-WALTER Product designation: ZDGT15A430R-K85 WMG40 Product type: milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 3 mm Plate size: 15 mm Thickness: A4 Chipbreaker: K85 Tolerance grade: G Special features Coated carbide (WMG40) Execution: T Broad material suitability (check product matrix) Optimised chipformer for controlled swarf FAQ What materials is this insert suitable for? The ZDGT15A430R-K85 WMG40 milling indexable insert is specified as a coated carbide grade intended for broad material ranges; suitability must be checked in the Walter Tools product matrix for particular alloys and hardness levels. How does the K85 chipbreaker affect machining? The K85 chipbreaker promotes consistent chip formation and evacuation, which supports uninterrupted machining cycles and fewer manual interventions for swarf removal when using the ZDGT15A430R-K85 WMG40 insert. Can the insert be used in high‑speed applications? The coated WMG40 grade offers a balance of wear resistance and toughness; suitability for high‑speed cutting depends on the specific machining parameters and workpiece material and should be validated against the manufacturer’s recommendations. What is the benefit of the 3 mm corner radius? A 3 mm corner radius increases edge strength and distributes cutting forces more evenly, improving resistance to chipping and supporting longer intervals between indexings or replacements. Is there guidance for selecting the right insert variant? Selection guidance and recommended cutting parameters are provided in Walter Tools documentation; consult Metav Werkzeuge’s technical team or the Walter Tools product matrix to match the ZDGT15A430R-K85 WMG40 insert to the intended application. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT15A440R-K85 WMG40 T Wendeplatten - Walter Tools
The combination of a coated cemented carbide grade (WMG40) and a K85 chipbreaker delivers stable chip formation and consistent cutting performance; the 15° relief angle plus a 4 mm corner radius further enhance edge stability for productive milling. Order the insert through Metav Werkzeuge or consult the technical team for machining compatibility. ZDGT15A440R-K85 WMG40 milling indexable insert — 15° relief, 4 mm corner radius (Walter Tools) The ZDGT15A440R-K85 WMG40 is a coated carbide milling indexable insert designed for standard milling applications where controlled chip formation and a reliable cutting edge are required. Coated cemented carbide grade WMG40 15° relief angle for consistent cutting Chipbreaker K85 for effective chip control 4 mm corner radius for increased edge strength Consistent cutting performance from a coated carbide grade The insert uses the WMG40 coated carbide class, a coated cemented carbide designed for balanced wear resistance and versatility. The 15° relief angle reduces rubbing and improves chip flow, which in turn lowers cutting forces and contributes to a more stable machining process. For shops seeking predictable cycle times, this geometry supports repeatable results and reduces the risk of premature edge wear. Check the product matrix for exact material suitability before series production to ensure optimal results. Reliable chip control and process security Equipped with the chipbreaker K85, the insert promotes defined chip segmentation and evacuation, helping to avoid tangling and heat concentration. The combination of the chipbreaker and the 4 mm corner radius provides a compromise between edge strength and surface finish — beneficial when tool life and component quality are priorities. The designation and execution codes indicate standardised geometry for simple tool handling and predictable replacement intervals. Standard format and handling for efficient tool changeovers With a plate size of 15 mm and a coded thickness A4, the insert fits common milling toolholders and supports fast indexable replacement, reducing downtime. The nominal designation ensures compatibility in procurement and tool inventory management. The manufacturing tolerance class G denotes consistent dimensional precision, which simplifies setup and reduces scrap from misalignment. This insert is suited to production environments where process stability and economical machining are required. For reliable machining with Walter Tools' WMG40 grade and the K85 chipbreaker, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: ZDGT15A440R-K85-WMG40-WALTER Designation: ZDGT15A440R-K85 WMG40 Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Execution: T Facts Relief angle: 15° Corner radius: 4 mm Plate size: 15 mm Thickness code: A4 Tolerance class: G Special features Grade: WMG40 Chipbreaker: K85 Series: Walter Schneidstoffsorte - Serie offen Material class: coated cemented carbide (as per product matrix) FAQ What is the relief angle of the insert? The ZDGT15A440R-K85 WMG40 insert features a 15° relief angle for improved chip flow and reduced rubbing. Which corner radius does this insert use? The insert is specified with a 4 mm corner radius, offering enhanced edge strength and resistance to chipping. What carbide grade and coating are used? The grade is WMG40, a Walter coated carbide class; the insert is a coated cemented carbide product—material suitability should be verified in the product matrix. What is the function of the K85 chipbreaker? The K85 chipbreaker promotes controlled chip formation and evacuation, supporting stable cutting conditions and improved process security. For which milling operations is the insert intended? The insert is designed for general milling tasks where consistent chip control and edge stability are required; final workpiece material compatibility should be checked against the product matrix. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com