XNMU0705ANN-F67 WKP35G Wendeplatten - Walter Tools
Combines extended tool life through Tiger·tec Gold coating, precise chip control with the F67 breaker and a robust 0° negative rake for steady milling performance. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. XNMU0705ANN-F67 WKP35G — Milling indexable insert, Tiger·tec Gold, for steel & cast iron — Walter Tools A XNMU0705ANN-F67 WKP35G milling indexable insert designed for reliable high-volume machining of steels and cast irons, featuring a coated-carbide grade from the Tiger·tec Gold family and a negative 0° relief for heavy-duty operations Tiger·tec Gold coating for extended life Suitable for steel and cast iron machining Negative 0° relief for robust cutting Chipbreaker F67 for dependable chip control Proven grade and coating for industrial milling The WKP35G grade from the Tiger·tec Gold series is a coated carbide solution developed for demanding production environments. As a coated insert it is optimised to resist abrasive wear and to maintain a stable cutting edge over long tool cycles. The specification targets the ISO groups P (steel) and K (cast iron), meaning the insert supports common workshop and shop-floor alloys while reducing unplanned tool changes. For procurement and tool-life calculations, this translates into fewer interruptions and a more predictable component cost per part. Geometry engineered for process security and chip management The insert’s negative 0° relief delivers a stronger cutting edge and greater stiffness, making the geometry particularly suitable for interrupted cuts and heavy feed milling. The F67 chipbreaker has been tuned to produce short, controllable chips on both steels and cast irons, reducing re-cutting and improving surface integrity. Combined with tolerance class M, the result is consistent seating in standard cutters and reproducible machining results—an asset for automated setups and repeat production runs where stability and reproducibility are decisive. Benefits for productivity, tool handling and shop-floor reliability Using this insert in production brings measurable advantages: improved process stability from the coated grade and geometry, reduced downtime due to longer life and stable wear, and better surface finish consistency thanks to controlled chip formation. The plate format 07 and the slim thickness allow compact cutter designs and economical use of tool bodies. For operations seeking predictable outputs and lower total tooling costs, the combination of grade, chip control and robust rake geometry supports higher throughput without compromising component quality. Contact Metav Werkzeuge for tailored recommendations on cutter compatibility and batch supply; quote SKU XNMU0705ANN-F67-WKP35G-WALTER via 📧 info@metav-werkzeuge.com or ☎️ +49 2822 7131930 Technical Data SKU: XNMU0705ANN-F67-WKP35G-WALTER Article designation: XNMU0705ANN-F67 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WKP35G Plate size: 07 Plate thickness: 05 Relief angle: 0° (negative) Chipbreaker: F67 Tolerance class: M Special features Material suitability: P / K (steel and cast iron) Execution: U Wendeplatte ISO designation included Coated carbide technology explained in the series enrichment FAQ What materials are recommended for this insert? The WKP35G grade is intended primarily for steel (P) and cast iron (K) machining; the insert XNMU0705ANN-F67 WKP35G performs best within these ISO groups. How does the negative 0° relief affect cutting behaviour? A 0° negative relief increases edge strength and stiffness, making the insert more resistant to shock and suitable for heavy or interrupted milling cycles. What role does the F67 chipbreaker play in production? The F67 chipbreaker produces short, controlled chips on both steel and cast iron, improving chip evacuation and reducing the risk of re-cutting or surface damage. Is the Tiger·tec Gold coating important for tool life? Yes, the Tiger·tec Gold coating enhances wear resistance and helps to maintain a stable cutting edge over prolonged tool life, supporting consistent production outputs. Which SKU should be quoted for ordering or enquiry? Refer to SKU XNMU0705ANN-F67-WKP35G-WALTER when enquiring about this milling insert to ensure correct identification. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names and designations serves explanation only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
XNMU0705ANN-F67 WSM35G U Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for extended tool life and reliable chip control when machining demanding materials. The robust 0° (negative) rake together with the F67 chipbreaker ensures stable cutting performance and reproducible results; order the insert directly via Metav Werkzeuge or consult the advisors for cutting data and delivery options. XNMU0705ANN-F67 WSM35G — Indexable milling insert, Tiger·tec Gold, 0° (negative) — Walter Tools A XNMU0705ANN-F67 WSM35G indexable milling insert designed for productive machining of rostfreiem Stahl and heat‑resistant alloys, offering stable edge retention and secure chip formation in demanding operations Tiger·tec Gold coating for high temperature stability Grade WSM35G for rostfreiem Stahl and Titan 0° (negative) rake for robust cutting action F67 chipbreaker for consistent chip control Higher process stability for demanding materials The combination of Tiger·tec Gold coating and the WSM35G cutting grade provides improved heat resistance and wear behaviour in high‑temperature applications. Coated carbide is selected for its ability to maintain a stable cutting edge when machining rostfreiem Stahl and superalloys; this reduces the risk of built‑up edge and supports predictable tool life. The engineered coating and substrate balance hardness with toughness to help achieve consistent surface quality and repeatable results in series production. Productive cutting with consistent chip control A 0° (negative) rake geometry paired with the specified F67 chipbreaker promotes secure chip formation and evacuation during aggressive milling. The geometry and chipbreaker are optimised to lower cutting forces peaks and to protect the cutting edge under intermittent loads. With a plate size 07 and thickness 05, the insert offers mechanical stability in the pocket and compatibility with standard cutter bodies; the tolerance class M supports precise seating and repeatable positioning for multi‑index use. Easy integration and reliable selection for production Specification and grade selection are simplified thanks to the clear designation and series information. The WSM35G grade is a coated carbide development aimed at S and M applications — that is, heat‑resistant superalloys and rostfreiem Stahl — delivering a good compromise between wear resistance and edge stability. For machine setup, match the insert to the recommended cutter body and cutting parameters; technical advisors at Metav Werkzeuge can provide tailored cutting data to maximise throughput and tool life while safeguarding component quality. Contact Metav Werkzeuge for tailored cutting data, availability and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: XNMU0705ANN-F67-WSM35G-WALTER Article designation: XNMU0705ANN-F67 WSM35G Product type: Indexable milling insert Manufacturer: Walter Tools Facts Plate size: 07 Thickness: 05 Relief / rake: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F67 Applicable materials: S / M (Titan, rostfreiem Stahl) Execution: U FAQ What materials is this insert suitable for? The XNMU0705ANN-F67 WSM35G insert is engineered for S and M groups — namely Titan and rostfreiem Stahl — providing secure chip control and edge stability in these materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the insert reduces thermal wear and supports longer tool life under elevated cutting temperatures, particularly when machining heat‑resistant alloys and rostfreiem Stahl. What is the purpose of the F67 chipbreaker? The F67 chipbreaker is designed to produce controllable, segmented chips and to assist reliable evacuation during milling, improving surface quality and reducing recutting. Is the 0° (negative) rake suitable for heavy‑duty milling? Yes. The 0° (negative) rake enhances mechanical strength of the cutting edge and improves robustness under heavy interruptions and high feed conditions. Which tolerance and dimensions ensure secure seating in the cutter? Tolerance class M, together with plate size 07 and thickness 05, ensures accurate seating and repeatable indexing in compatible milling cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is part of the Sandvik group and belongs to the worldwide leading manufacturers of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for clarification purposes only; there is no affiliation between our company and the referenced brands. The offered item is an original, factory‑new product of the manufacturer.
XNMU0705ANN-F67 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the WSM45X grade and F67 chipbreaker to secure stable edge life and controlled chip formation in demanding stainless and heat-resistant alloy machining; order or discuss implementation via Metav Werkzeuge for reliable supply and application advice. XNMU0705ANN-F67 WSM45X milling indexable insert — WSM45X grade, F67 chipbreaker by Walter Tools for stainless steels and superalloys The XNMU0705ANN-F67 WSM45X is a coated carbide milling insert engineered for heavy-duty machining of stainless steels and heat-resistant superalloys, offering a combination of wear resistance and edge stability for demanding production environments. WSM45X coated carbide for wear resistance F67 chipbreaker for secure, consistent chips 0° negative relief for stable heavy cuts Maximise throughput on tough materials with a wear-resistant grade The WSM45X coating and substrate pairing delivers a clear production advantage when machining stainless steels and nickel-based alloys: enhanced wear resistance and a stable cutting edge reduce unplanned tool changes and improve process repeatability. By selecting a grade optimised for high temperatures and abrasive conditions, machining cycles become more predictable, which supports higher overall productivity and fewer interruptions in a batch or continuous production schedule. This performance is particularly relevant where consistent surface finish and dimensional stability are required. Controlled chip formation and stable geometry for reliable results The insert’s F67 chipbreaker has been designed to shape and evacuate chips effectively under varied cutting conditions, reducing the risk of built-up edge and improving surface quality. Combined with the 0° (negative) relief, the geometry provides mechanical robustness for heavier depth-of-cut operations and interrupted cuts, ensuring the cutting edge remains intact under high mechanical load. The result is fewer rework cycles and a more consistent component finish across long production runs. Clear material scope and ISO-classified applicability for confident specification Designed for ISO material groups M and S, this indexable cutting solution supports machining of rostfreier Stahl (stainless steels) and heat-resistant superalloys and titanium alloys, where thermal stability and edge integrity are critical. The designation follows ISO 513 groupings: M for stainless steels with a tendency to work-harden and form built-up edges, and S for superalloys and titanium that transmit heat poorly. Specifying this insert in tool lists communicates a targeted strategy for these challenging materials and aids in process standardisation. Practical details that simplify selection and inventory control The insert is supplied in the Walter Tools open-series grade and is classified to tolerance M, with plate size 07 and thickness 05 as part of its mechanical profile. These consistent mechanical and geometrical parameters make tool management straightforward and enable predictable fixture and cutter body compatibility. Where tool life and repeatable performance matter, the combination of a defined tolerance class, a robust chipbreaker and a thermal-capable grade reduces variability and supports lean stocking practices. Discuss implementation with Metav Werkzeuge to evaluate how Walter Tools' WSM45X inserts can improve machining reliability in demanding stainless steel and superalloy applications — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data SKU: XNMU0705ANN-F67-WSM45X-WALTER Designation: XNMU0705ANN-F67 WSM45X Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Chipbreaker: F67 Relief angle: 0° (negative) Plate size: 07 Plate thickness: 05 Tolerance class: M Material groups: S / M Facts Material groups (ISO): M, S Relief: 0° (negative) Tolerance: M Plate dimensions: size 07, thickness 05 Coating / substrate: coated carbide (as per grade WSM45X) Special features Coated carbide grade optimised for heat resistance Chip control via F67 chipbreaker Designed for stainless steels and superalloys Robust geometry for interrupted and heavy cuts Walter Tools open-series grade for broad application FAQ Which materials is this insert suitable for? The XNMU0705ANN-F67 insert with WSM45X grade is intended for ISO groups M and S, meaning it is suitable for machining stainless steels and heat-resistant superalloys or titanium. What advantage does the F67 chipbreaker offer? The F67 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, reducing built-up edge and helping to maintain consistent surface quality during extended runs. Why is the 0° negative relief relevant? A 0° (negative) relief improves mechanical support behind the cutting edge, increasing stability during heavy cuts and interrupted machining, which is why this insert is recommended where robustness is required. What does tolerance class M indicate for shop use? Tolerance class M denotes medium tolerance for geometry and seat fit, providing a balance between interchangeability and precision that suits many industrial milling tool holders and production requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metal machining and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original and brand-new from the manufacturer.
XNMU090612-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of a high‑performance Walter Tools milling insert that combines the Tiger‑tec Silver grade and a controlled F57 chipbreaker to deliver stable machining of steel and cast iron; order directly via Metav Werkzeuge or request tailored cutting data from the consultants. XNMU090612-F57 WKP25S milling insert — Tiger‑tec Silver grade with F57 chipbreaker | Walter Tools A XNMU090612-F57 WKP25S insert engineered for productive face and peripheral milling of steel and cast iron, offering robust edge stability for industrial machining Tiger‑tec Silver coating for longevity Suitable for steel and cast iron machining Negative rake geometry 0° for stable cutting Chipbreaker F57 for controlled chip formation Corner radius 1.2 mm for robust edge strength Predictable performance on steel and cast iron workpieces The Tiger‑tec Silver grade WKP25S is developed to balance wear resistance and toughness for demanding production environments. As a coated cemented carbide grade, it is optimised for the heat and chip formation typical of machining steel and cast iron, which results in consistent tool life and reproducible part quality. The combination of the grade and the specified F57 chipbreaker gives reliable chip control that reduces downtime caused by irregular chips and simplifies swarf handling in high‑throughput operations. Geometry designed for process stability and edge security The insert’s negative rake (0°) geometry and a corner radius of 1.2 mm deliver higher edge strength for interrupted cuts and heavy engagement cycles. This geometry improves resistance to chipping under variable cutting forces and supports predictable wear progression, which is essential for planned tool changes and cycle time optimisation. The F57 chipbreaker actively shapes the chip to shorter, manageable segments, helping to maintain a stable machining process and improving surface finish without sacrificing productivity. System benefits: repeatability, handling and integration As a standard indexable plate in the Tiger‑tec Silver family, this insert fits into established cutter systems and supports straightforward tool management in series production. Key numeric attributes — plate size 09 and plate thickness 06 — allow easy identification and stocking within toolrooms, while the tolerance class M ensures interchangeability and repeatable clamping accuracy. Using this insert contributes to process reliability and measurable cost efficiency by reducing unexpected tool failures and maintaining consistent part tolerances. For tailored cutting data, availability and rapid supply of the XNMU090612-F57 WKP25S from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert, application‑specific advice Technical data SKU: XNMU090612-F57-WKP25S-WALTER Designation: XNMU090612-F57 WKP25S Product type: Milling insert Manufacturer: Walter Tools Numbers and dimensions Corner radius: 1.2 mm Free angle: 0° Plate size: 09 Plate thickness: 06 Tolerance class: M Special features Grade: WKP25S Series: Tiger‑tec Silver Chipbreaker: F57 Applicable materials: Steel (P), Cast iron (K) Execution: U FAQ Which materials are recommended for this insert? The XNMU090612-F57 WKP25S milling insert from Walter Tools is recommended primarily for steel (P) and cast iron (K) applications, matching the grade’s design for typical chip formation and wear behaviour in those material groups. What benefit does the Tiger‑tec Silver WKP25S grade provide? WKP25S, from the Tiger‑tec Silver family, offers a coated carbide composition that improves wear resistance and maintains edge toughness, helping to extend service life while keeping machining performance stable across production batches. Why is the 0° negative rake advantageous? A 0° negative rake increases edge strength and reduces the risk of chipping under heavy cuts or interrupted machining, which enhances process security and supports consistent component quality. How does the F57 chipbreaker affect machining? The F57 chipbreaker produces short, controlled chips that ease swarf evacuation and reduce the likelihood of built‑up edge, contributing to a steadier cutting action and improved surface finishes on both steel and cast iron. What are the insert size and mounting details? The insert is specified as plate size 09 with a thickness of 06, tolerance class M, and execution U, enabling compatibility with corresponding cutter bodies designed for this format. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
XNMU090612-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP35G grade for extended cutting life and consistent chip control in demanding milling operations; order directly via Metav Werkzeuge or consult the team for process recommendations. XNMU090612-F57 WKP35G — Milling indexable insert for steel and cast iron (Walter Tools), Tiger‑tec Gold, negative 0° The XNMU090612-F57 WKP35G is a coated carbide milling insert designed for robust face and peripheral milling of steel and cast iron, offering stable chip formation and reliable performance under varying cutting conditions. Tiger‑tec Gold coated carbide grade WKP35G Negative 0° rake for robust cutting Suitable for steel and cast iron machining 1.2 mm corner radius, chipbreaker F57 Maximise uptime with Tiger‑tec Gold coating and WKP35G grade The combination of Tiger‑tec Gold technology and the WKP35G coated carbide grade delivers higher wear resistance and improved tool life compared with uncoated grades. The advanced coating system reduces flank wear and promotes stable edge retention, which translates into longer uninterrupted cutting periods and fewer index changes. For production environments where predictable tool performance affects cycle time and scrap rates, this insert helps maintain consistent output while reducing tooling interventions. Stable chip control and robust cutting geometry for ferrous materials Featuring the chipbreaker F57 and a negative 0° rake, the insert is engineered for controlled chip breaking and high process security when machining both steel and cast iron. The negative rake geometry increases edge strength for interrupted cuts or tough materials, while the specified chip form and clearance ensure that heat and forces are managed effectively. This results in reliable surface quality and a reduced likelihood of edge chipping during heavy cuts, improving first-pass yields in series production and job-shop work alike. Precise geometry for predictable tool setup and repeatability With a 1.2 mm corner radius and standard size code 09 / thickness 06, the insert provides a well-defined cutting edge that supports repeatable set-up and consistent dimensional results. The tolerance class M ensures close conformity to nominal dimensions, simplifying toolholder selection and minimising runout concerns. Integration into existing tool systems is straightforward, and documented geometry makes it easier to define cutting data for different steel grades and cast iron types, supporting faster process stabilisation and consistent part quality. Contact Metav Werkzeuge for detailed cutting data and application support for the Walter Tools XNMU090612-F57 WKP35G insert to secure reliable milling performance in steel and cast iron Technical data Article number: XNMU090612-F57-WKP35G-WALTER Label: Fräswendeschneidplatte XNMU090612-F57 WKP35G Walter Tools Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F57 Tolerance class: M Facts Plate size: 09 Plate thickness: 06 Corner radius: 1.2 mm Rake angle: 0° (negative) Applicable materials: P (steel), K (cast iron) Special features Coated carbide cutting material Designed for steel and cast iron machining Stable chip formation and wear resistance Suitable for robust and interrupted cuts Series description: Tiger‑tec Gold coating technology FAQ What materials is this insert suitable for? The XNMU090612-F57 WKP35G insert is formulated for machining steel (ISO group P) and cast iron (ISO group K), using the WKP35G grade and Tiger‑tec Gold coating to handle typical thermal and abrasive conditions. How does the negative 0° rake affect performance? A negative 0° rake increases edge strength and resistance to chipping, making the insert particularly reliable in interrupted cuts or when machining tougher steels and cast iron where robustness is required. What role does the chipbreaker F57 play? The chipbreaker F57 is designed to produce controlled, short chips in ferrous materials, improving evacuation and reducing the risk of long stringy chips that can interrupt production or damage workpieces. Can the insert be used for finishing operations? With a 1.2 mm corner radius and the Tiger‑tec Gold coating, the insert provides a balance between edge strength and surface finish; it is suitable for many general finishing tasks but should be paired with appropriate feeds and speeds for fine surface requirements. Which series and grade should be selected for mixed production of steel and cast iron? The Tiger‑tec Gold series with the WKP35G grade, as embodied in the XNMU090612-F57 WKP35G, is a versatile choice for mixed production of steel and cast iron due to its wear-resistant coating and geometry optimised for both material groups. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
XNMU090612-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the WSP45G grade for stable chip formation and broad material coverage; the negative 0° rake and 1.2 mm corner radius deliver reliable edge strength and process security. Order the insert directly via Metav Werkzeuge or ask the consultants if specific machining parameters are required. XNMU090612-F57 WSP45G Fräswendeschneidplatte by Walter Tools — Tiger‑tec Gold, negative 0° rake The XNMU090612-F57 WSP45G is a coated carbide milling insert designed for versatile milling of steel, rostfreier Stahl and high‑temperature alloys, offering robust edge stability for demanding operations. Tiger‑tec Gold PVD coating for long tool life Negative 0° rake for stable cutting action 1.2 mm corner radius for edge strength Suitable for steel, rostfreier Stahl and superalloys High process reliability through optimised coating and grade The Tiger‑tec Gold PVD coating combined with the WSP45G grade provides a balance between wear resistance and toughness. This combination reduces flank wear and improves tool life in long cycles, which translates into fewer tool changes and more stable production runs. The coating supports secure chip formation when machining both unalloyed and alloyed steels, while the substrate toughness helps prevent premature chipping on interrupted cuts. The net effect is a measurable improvement in machining consistency and component quality. Robust geometry for demanding milling tasks A negative 0° rake angle and a corner radius of 1.2 mm give the insert a secure cutting edge that resists thermal and mechanical shock. The negative rake promotes a controlled cutting action and helps to maintain edge integrity in heavy cuts or irregular material sections. The 1.2 mm radius increases resistance to edge breakdown, which is particularly beneficial in semi‑roughing and finishing sequences where a consistent surface finish and dimensional repeatability are required. Clear application range and material compatibility The insert is specified for use across the ISO groups P / M / S: P (steel), M (rostfreier Stahl) and S (heat‑resistant superalloys and titanium). This broad coverage makes the insert a practical choice where job mixes include both structural steels and more demanding, heat‑resistant materials. For operators and process engineers, this means reduced inventory complexity and quicker setup for mixed production orders, without compromising cutting performance on tougher alloys. Practical benefits for workshops and production lines The chipbreaker F57 is tailored to the WSP45G grade and supports predictable chip control, reducing the risk of chip entanglement and improving surface quality. The insert’s execution (U) and tolerance class (M) ensure consistent seating and repeatable positioning in toolholders, which simplifies tool change procedures and maintains process stability. Overall, the geometry and coating combination aim to increase productive cutting time and lower total machining costs through improved tool life. For reliable milling performance with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for ordering and application advice — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XNMU090612-F57-WSP45G-WALTER Designation: XNMU090612-F57 ISO designation: XNMU090612-F57 WSP45G Brand: Walter Tools Facts Corner radius: 1.2 mm Rake angle: 0° (negative) Insert size: 09 Thickness: 06 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G (coated carbide) Chipbreaker: F57 Execution: U Material compatibility: P / M / S (steel, rostfreier Stahl, superalloys/titanium) FAQ What materials can this insert machine effectively? The XNMU090612-F57 WSP45G insert (Walter Tools) is suitable for P / M / S groups: steel, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the WSP45G grade improves wear resistance and supports stable chip formation, extending tool life and increasing uptime on continuous milling operations. Is the negative 0° rake suitable for heavy cuts? Yes — the negative 0° rake of this insert promotes a controlled, robust cutting action that helps maintain edge integrity during heavy or interrupted cuts. Which chipbreaker is matched to this insert and why is it important? The F57 chipbreaker is specified for this insert; it enables reliable chip control and helps to avoid chip buildup, contributing to consistent surface finish and safer machining. What does the tolerance class M mean for toolholders? Tolerance class M indicates consistent manufacturing tolerances for repeatable seating in the cutter body, which improves assembly accuracy and process stability for serial production. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
XNMU0906ANN-F27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of a durable Tiger·tec Gold coating and a robust chipbreaker design to deliver consistent machining of cast iron parts. The combination of the Walter carbide grade and a 0° negative rake ensures reliable edge stability and repeatable performance in demanding milling operations. Order directly via Metav Werkzeuge or contact our consultants for specification support and availability. Milling insert XNMU0906ANN-F27 WKK25G – Tiger·tec Gold coating, 0° negative rake (cast iron) by Walter Tools A high-performance milling insert, XNMU0906ANN-F27 WKK25G, designed for efficient, reproducible machining of cast iron components in production and repair environments. Tiger·tec Gold coating for long tool life Optimised for cast iron machining 0° negative rake for robust cutting Chipbreaker F27 for stable chip control Longer tool life thanks to advanced coating technology The Tiger·tec Gold coating together with the WKK25G grade provides a wear-resistant surface that significantly slows flank and crater wear during interrupted cuts. This coated carbide combination is specifically adapted to the abrasive and often brittle chips produced when machining cast iron, which means fewer insert changes and less unscheduled downtime. The result is a more predictable process and reduced tooling consumption per component. Consistent cutting performance and edge stability A 0° negative rake geometry delivers a more stable cutting edge under heavy loads and interrupted cutting typical for cast iron workpieces. The chipbreaker F27 reliably shapes shorter, controllable chips that evacuate easily, improving surface finish and reducing the risk of re-cutting. These technical choices translate into higher process security and consistent part quality in serial milling tasks. Economical machining through reproducible results By combining a tailored carbide grade and proven coating technology, the insert supports both efficient cycle times and long stand time. The WKK25G composition is optimised for the abrasive nature of cast iron, so the performance is less sensitive to small variations in cutting conditions. This predictability reduces scrap rates and makes cost-per-part calculations more favourable for medium to large production runs. Practical integration in workshop and production environments The insert is supplied in the standard XNMU0906ANN-F27 designation and fits into established milling tool systems that accept the size‑09, thickness‑06 format and tolerance class M. Its negative rake and chipbreaker geometry work well in roughing and semi-finishing operations where stability and chip control are priorities. For best results, pair the insert with a cutter body specified for this ISO-style geometry and verify seat and clamping compatibility before series production. For dependable cast iron milling performance with Walter Tools’ Tiger·tec Gold reliability, contact Metav Werkzeuge for technical advice and current availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: XNMU0906ANN-F27-WKK25G-WALTER Designation: XNMU0906ANN-F27 ISO designation: XNMU0906ANN-F27 WKK25G Series: Tiger·tec Gold Grade: WKK25G Facts Insert size: 09 Thickness: 06 Rake angle: 0° negative Chipbreaker: F27 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Optimised for cast iron machining Execution: U FAQ Which materials is this insert intended for? The WKK25G grade and Tiger·tec Gold coating are tuned for cast iron, making the insert particularly suitable for abrasive, brittle materials and ensuring controlled chip formation during milling. How does the 0° negative rake affect machining? A 0° negative rake increases edge robustness and resistance to impact during interrupted cuts; this geometry is why many workshops rely on this insert for stable roughing and semi-finishing in cast iron applications. Is the XNMU0906ANN-F27 compatible with standard holder systems? The insert follows the common ISO-style designation and fits cutter bodies designed for the XNMU0906ANN family and size 09 inserts; always check seat compatibility and clamping before series use. What benefits does the Tiger·tec Gold coating deliver? Tiger·tec Gold reduces abrasive wear and enhances thermal resistance, contributing to longer, more predictable tool life and more consistent surface quality on cast iron components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used here for explanatory purposes only. There is no affiliation between our company and the trademark owners. The item offered is an original, brand-new product from the manufacturer.
XNMU0906ANN-F27 WKP35G U Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WKP35G grade for extended tool life and reliable chip control; the F27 chipbreaker and 0° negative rake deliver consistent performance in steel and cast-iron milling. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. XNMU0906ANN-F27 WKP35G milling insert — Tiger·tec Gold coating, for Steel & Cast iron (Walter Tools) The XNMU0906ANN-F27 WKP35G is a coated carbide milling insert designed for stable chip formation and productive roughing and finishing in steel and cast-iron applications Tiger·tec Gold coating for extended tool life Optimised F27 chipbreaker for consistent chips Suitable for Steel (P) and Cast iron (K) 0° negative rake for stable cutting forces Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WKP35G grade provides a marked improvement in wear resistance and thermal stability compared with standard grades. This coated carbide composition reduces flank wear and extends interval times between indexings and insert changes, which supports higher overall uptime. For production environments where repeatability matters, the enhanced tool life translates into fewer interruptions and more consistent component quality. Stable chip control and predictable machining results With the integrated F27 chipbreaker and a 0° negative rake, the insert promotes short, controllable chips when machining both Steel and Cast iron. The geometry is designed to manage the heat and deformation typical of these workpiece groups, lowering the risk of built-up edge and improving surface finish. The result is a stable cutting process that supports higher feed rates while maintaining dimensional accuracy and repeatable part quality. Practical benefits for workshop productivity The medium tolerance class (M) and the compact plate size (09, thickness 06) offer a balance between rigidity and versatility for various cutter bodies. The insert’s negative geometry enhances process security under variable cutting conditions and is particularly effective when interrupted cuts or entry/exit events occur. This leads to measurable productivity gains by enabling more aggressive machining strategies without compromising tool life or surface integrity. Application guidance and material suitability Designed for the ISO material groups P (steel) and K (cast iron), the insert fits operations where both abrasive wear resistance and good chip control are required. The WKP35G grade is tailored to the heat and chip characteristics of these materials, offering predictable performance across a wide range of steels and cast irons. For process planning, pairing the insert with appropriate cutting parameters and coolant strategies will further enhance performance and longevity. For precise application advice or to secure original Walter Tools Tiger·tec Gold WKP35G inserts, contact Metav Werkzeuge for expert guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: XNMU0906ANN-F27-WKP35G-WALTER Label: Fräswendeschneidplatte XNMU0906ANN-F27 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Milling insert ISO designation: XNMU0906ANN-F27 WKP35G Facts Plate size: 09 Plate thickness: 06 Relief / rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F27 Material suitability: P (Steel), K (Cast iron) Execution: U FAQ What workpiece materials is this insert suitable for? The XNMU0906ANN-F27 WKP35G milling insert is designed for ISO groups P (steel) and K (cast iron), providing optimised wear behaviour and chip control for these materials. What advantage does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating on this Walter Tools insert enhances thermal resistance and reduces abrasive wear, resulting in longer service life and improved process stability under higher cutting temperatures. How does the F27 chipbreaker affect machining? The F27 chipbreaker gives consistent, short chips that are easier to evacuate, reducing the risk of entanglement and improving surface finish during both roughing and semi-finishing operations. Why is the 0° (negative) rake important for this insert? A 0° negative rake provides a robust cutting edge and better resilience against impact and interrupted cuts, improving process security where cutting conditions vary or when machining complex geometries. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not indicate any association between our company and the named manufacturers. The offered item is an original, brand-new product from Walter Tools.
XNMU0906ANN-F27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the WPP35G grade and Tiger‑tec Gold technology for consistent performance in steel machining; the chipbreaker F27 and negative 0° seating ensure reliable chip control and secure insert retention. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. XNMU0906ANN-F27 WPP35G milling indexable insert — Tiger‑tec Gold grade for steel, Walter Tools A XNMU0906ANN-F27 WPP35G milling indexable insert engineered for robust, repeatable machining of steel under standard production conditions. Tiger‑tec Gold coating for long tool life Optimised chip control with F27 breaker Designed for steel machining (ISO P) Negative 0° rake for secure seating Reliable productivity for steel applications The WPP35G grade, paired with the Tiger‑tec Gold coating, provides a balanced combination of wear resistance and toughness for machining steels classified under ISO P. This balance translates into consistent tool life and fewer unexpected interruptions on the shop floor. The insert geometry and coating are chosen to manage the typical heat and chip formation of steel machining, which supports sustained machining cycles and predictable performance in series production. Coating and grade explained: what the technology brings The designation indicates a coated carbide substrate with a modern multilayer treatment designed to reduce flank wear and improve edge stability. The Tiger‑tec Gold technology focuses on adhesion and thermal management at the cutting edge; as a result, the WPP35G sort delivers stable cutting edges over extended runs. For buyers less familiar with coatings: this means fewer changeovers, more consistent surface finish and better resistance against the common wear mechanisms encountered when machining unalloyed and alloyed steels. Secure seating and chip control for smoother processes The combination of chipbreaker F27 and a negative 0° seat offers enhanced chip control and a secure clamping interface, reducing the risk of insert movement under heavy or interrupted cuts. The nominal plate size 09 and thickness 06 are adapted to standard milling toolholders, enabling easy integration into existing tool inventories. By stabilising chip flow and mechanical seating, this insert contributes to lower vibration, less rework and improved process reliability across medium-to-heavy milling tasks. Contact Metav Werkzeuge today for tailored machining advice and stock availability for the Walter Tools XNMU0906ANN-F27 WPP35G milling indexable insert Technical data SKU: XNMU0906ANN-F27-WPP35G-WALTER Article: XNMU0906ANN-F27 WPP35G Manufacturer: Walter Tools Product type: Milling indexable insert Core data Plate size: 09 Thickness: 06 Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP35G Chipbreaker: F27 Material application: steel (ISO P) Execution: U Insert material: coated carbide FAQ What materials is this insert intended for? This XNMU0906ANN-F27 WPP35G milling indexable insert from Walter Tools is designed primarily for machining steels (ISO P), including unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP35G grade improves wear resistance and edge stability, which supports longer, more predictable tool life and fewer interruptions in production. What does the chipbreaker F27 do for milling performance? The chipbreaker F27 promotes controlled chip formation and evacuation, reducing the likelihood of tangling and helping to maintain a stable cutting process during milling operations. Is the negative 0° free angle suitable for standard toolholders? Yes, the negative 0° seating of the insert is compatible with standard clamping systems for this plate size and contributes to secure retention under variable cutting loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNMU0906ANN-F57 WKP25S Wendeplatten - Walter Tools
Efficient milling of Stahl and Gusseisen is supported by the combination of the Tiger‑tec Silver grade and the F57 chipbreaker, delivering stable cutting behaviour and long tool life; order the XNMU0906ANN-F57 WKP25S via Metav Werkzeuge or consult our specialists for tailored application advice. XNMU0906ANN-F57 WKP25S Milling Insert – Tiger‑tec Silver for Stahl & Gusseisen (Walter Tools) A XNMU0906ANN-F57 WKP25S milling indexable insert engineered for productive face and peripheral milling of Stahl and Gusseisen in industrial machining environments. Tiger‑tec Silver coating for extended tool life Optimised F57 chipbreaker for secure chip control 0° negative rake for robust milling operations High process reliability for demanding materials The combination of the Tiger‑tec Silver coating and the WKP25S carbide grade provides a balanced performance for machining Stahl and Gusseisen. The coating reduces abrasive wear and thermal softening, which in turn extends cutting-edge life and maintains dimensional accuracy over longer tool lives. Designed for the ISO P and K groups, this insert adapts to the heat and chip-forming characteristics typical of these materials, reducing the need for frequent tool changes and stabilising cycle times for continuous production. Consistent chip control for safer, faster machining The F57 chipbreaker is engineered for reliable chip formation and evacuation during face and shoulder milling. Combined with the 0° (negative) rake geometry, the insert offers a robust cutting edge that tolerates interrupted cuts and heavy engagement. These features lead to predictable chip shapes and reduced risk of chip-related machine stoppages. Improved chip control also helps maintain a consistent surface finish, lowering the requirement for secondary operations and increasing process efficiency. Practical design details that simplify integration and set-up Available in plate size 09 with thickness 06 and tolerance class M, the insert fits a range of common milling cutter bodies and clamping solutions. The standardised designation supports swift identification on tool lists and in inventory systems, helping to streamline tool management. The sturdy edge preparation and coating technology support longer tool life and repeatable performances, which together reduce tooling costs per part and contribute to a reliable, productive machining process with fewer unscheduled interruptions. For robust, productive milling with Walter Tools' Tiger‑tec Silver inserts, contact Metav Werkzeuge for application-specific recommendations and rapid supply — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: XNMU0906ANN-F57-WKP25S-WALTER Product designation: XNMU0906ANN-F57 WKP25S Manufacturer: Walter Tools Facts Plate size: 09 Plate thickness: 06 Tolerance class: M Rake angle: 0° (negative) Special features Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: F57 Material suitability: Stahl, Gusseisen Geometry / execution: U FAQ What materials is this insert suitable for? The XNMU0906ANN-F57 WKP25S is designed for machining Stahl and Gusseisen, utilising the Tiger‑tec Silver technology and WKP25S grade for these ISO material groups. How does the F57 chipbreaker affect machining? The F57 chipbreaker provides controlled chip formation and evacuation, improving surface finish consistency and reducing the likelihood of chip-related interruptions when using this Walter Tools milling insert. What does the 0° (negative) rake mean in practice? A 0° (negative) rake gives the insert a robust cutting edge that tolerates interrupted cuts and heavy engagement, increasing process security in demanding milling operations. Can this insert be used in high-speed applications? The Tiger‑tec Silver coating and WKP25S grade are optimised for a broad range of cutting conditions; suitability for high-speed machining should be checked against specific cutter body and machine capability. Which designation should be referenced for ordering and inventory? Use the designation XNMU0906ANN-F57 WKP25S and the SKU XNMU0906ANN-F57-WKP25S-WALTER to ensure the correct insert version is supplied. Walter Tools is a trademark of its owner. Trademarks and designations are used for explanation only; there is no affiliation between our company and the named brands. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
XNMU0906ANN-F57 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of durable Tiger·tec Gold coating, reliable WKP35G grade and 0° negative rake for consistent, high-productivity milling of steel and cast iron; order directly via Metav Werkzeuge or consult the technical team for application support. XNMU0906ANN-F57 WKP35G milling insert — Tiger·tec Gold for steel and cast iron | Walter Tools The XNMU0906ANN-F57 WKP35G is a precision milling insert designed for productive machining of steel and cast iron, featuring the Tiger·tec Gold coating and an F57 chipbreaker for controlled chip formation Tiger·tec Gold coating for extended tool life WKP35G grade for steel and cast‑iron machining 0° negative rake for stable cutting performance Optimised chip control with F57 chipbreaker Increase process productivity with advanced coating technology The Tiger·tec Gold coating delivers a measurable improvement in tool life and wear resistance, enabling longer intervals between insert changes and fewer unplanned stoppages. As a coated carbide grade, WKP35G is engineered to withstand the heat and abrasive conditions typical when machining steel and cast iron, which reduces tool consumption and supports a more economical production flow. The result is a more predictable machining process and improved overall equipment effectiveness. Secure cutting performance through geometry and chip control The insert’s 0° negative rake geometry and the F57 chipbreaker combine to provide stable cutting forces and consistent chip formation. Stable chip control reduces the risk of built-up edge and erratic cutting, which improves surface finish and dimensional consistency. For applications where repeatability and process security matter, this geometry supports reliable chip evacuation and helps maintain machining tolerances over longer tool life. Versatile applicability across common machining tasks Specifically developed for grades P and K according to ISO classifications, the insert suits a broad range of operations on steel and cast iron components. The robust grade and coating combination makes the tool suitable for general milling where thermal load and abrasive wear are present, enabling shops to standardise on a single insert grade for multiple tasks and reduce inventory complexity while maintaining consistent results. Reliable tolerances and series benefits for production environments Manufactured to tolerance class M and as part of the Tiger·tec Gold series, the insert supports reproducible mounting and repeatable performance in indexable toolholders. The standard plate thickness and form allow straightforward replacement and compatibility with common cutter bodies, helping to minimise downtime during tool changes and preserving cycle-time efficiency in both batch and continuous production settings. Contact Metav Werkzeuge for tailored application guidance and to source Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XNMU0906ANN-F57-WKP35G-WALTER Label: Fräswendeschneidplatte XNMU0906ANN-F57 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WKP35G ISO designation: XNMU0906ANN-F57 WKP35G Version: U Facts Plate size: 09 Plate thickness: 06 Clearance angle: 0° (negativ) Chipbreaker: F57 Tolerance class: M Material indication: P / K Applications / Special features Suitable for steel (P) Suitable for cast iron (K) Coating technology: Tiger·tec Gold Optimised chip formation and stable cutting performance Robust, coated carbide grade for productive milling FAQ What materials can this insert machine effectively? The XNMU0906ANN-F57 WKP35G insert is suitable for steel (P) and cast iron (K) machining, reflecting the design intent of the WKP35G grade and the Tiger·tec Gold coating. How does the 0° negative rake affect performance? A 0° negative rake provides stable cutting forces and improved edge strength; in the XNMU0906ANN-F57 WKP35G this supports consistent chip formation and reliable surface quality in demanding milling operations. Is the chip control suitable for long interrupted cuts? The F57 chipbreaker integrated into this milling insert is optimised for controlled chip fragmentation, which assists in interrupted and continuous milling where predictable chip flow is required. Which series does this insert belong to and what is the benefit? Belonging to the Tiger·tec Gold series, the insert benefits from a coating and grade combination engineered for enhanced wear resistance and extended service life under the thermal and abrasive loads typical of steel and cast-iron machining. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNMU0906ANN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM35G grade for stable edge life and productive machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. XNMU0906ANN-F57 WSM35G — Walter Tools milling indexable insert, F57 chipbreaker, 0° negative rake XNMU0906ANN-F57 WSM35G is a coated carbide milling indexable insert engineered for productive machining of stainless steel and heat‑resistant superalloys in demanding industrial applications Tiger·tec Gold coating for long tool life Optimised F57 chipbreaker for stable chips 0° negative rake for secure edge strength Suitable for stainless steel and superalloys Stable performance on demanding materials The WSM35G grade, part of the Tiger·tec Gold series, is formulated as a coated carbide to cope with the challenges of stainless steel and high‑temperature alloys. These materials are prone to work hardening and high thermal loads; the grade therefore supports secure chip formation and maintains a stable cutting edge, reducing the risk of built‑up edge and unexpected tool changes. The result is a more predictable machining process and fewer interruptions during serial production. Coating and substrate that extend productive running time The combination of a wear‑resistant substrate and the Tiger·tec Gold coating provides enhanced resistance to thermal and abrasive wear. This leads to improved tool life and consistent cutting performance under elevated temperatures. In practical terms, the insert sustains higher cutting loads and longer tool cycles, which benefits throughput and reduces time spent on tool replacement, contributing to measurable productivity gains in machining stainless steel and difficult‑to‑cut alloys. Geometry tuned for reliable chip control and edge security The F57 chipbreaker is optimised to break and evacuate chips reliably during interrupted or continuous milling operations, promoting steady surface quality and lowering the risk of recutting. The 0° negative rake increases edge robustness, particularly useful when confronting varied material batches or interrupted cuts. The insert designation indicates a plate size of 09 and a thickness of 06, which together support stable clamping and repeatable indexability in standard milling holders. Process advantages and shop‑floor relevance In production environments the insert contributes to repeatable component quality and reduced process variation. Where stainless steel or superalloys are machined, the grade’s focus on heat resistance and edge stability helps to maintain surface integrity and dimensional consistency. For manufacturers seeking predictable cycle times and dependable tool life, the insert offers a pragmatic balance between performance and operational reliability, making it suitable for both jobbing shops and serial production lanes. Contact Metav Werkzeuge for detailed application support and availability of Walter Tools Tiger·tec Gold inserts; our consultants can advise on the optimal geometry and holder compatibility for specific stainless steel machining tasks Technical Information Article number: XNMU0906ANN-F57-WSM35G-WALTER SKU: XNMU0906ANN-F57-WSM35G-WALTER Designation: XNMU0906ANN-F57 WSM35G Numbers / Core technical data Plate size: 09 Plate thickness: 06 Clearance/rake: 0° (negativ) Tolerance class: M Designs / Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F57 Execution: U Material applicability: S / M (superalloys / stainless steel) Product type: Fräswendeschneidplatte (milling indexable insert) FAQ What materials is this insert suitable for? The insert is suitable for machining stainless steel and heat‑resistant superalloys; the WSM35G grade and Tiger·tec Gold coating are designed to support secure chip formation and edge stability on these groups. How does the F57 chipbreaker influence machining performance? The F57 chipbreaker promotes reliable chip control and evacuation during milling, which helps to preserve surface finish and prevent recutting when using the XNMU0906ANN-F57 WSM35G insert. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases edge strength and is advantageous for interrupted cutting conditions, offering greater robustness for demanding stainless steel operations. Can this insert be used in standard milling tool holders? The insert follows common indexable insert dimensions (plate size 09, thickness 06) and is compatible with holders designed for the XNMU0906ANN family; holder selection should match the insert geometry for secure clamping and optimal performance. What benefits does the Tiger·tec Gold series provide in production? Tiger·tec Gold coating delivers improved wear resistance and thermal stability, resulting in longer tool life and more consistent machining results when processing stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. The offered item is original, brand‑new merchandise of the manufacturer. Protected trademarks and product names are mentioned for identification purposes only and do not indicate any affiliation with Metav Werkzeuge.
XNMU0906ANN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold durability and a chipbreaker F57 for consistent chip control and longer tool life; the insert suits machining of Stahl, rostfreier Stahl and Titan, supporting reliable production. Order the XNMU0906ANN‑F57 WSP45G directly via Metav Werkzeuge or ask the consultants for application guidance. XNMU0906ANN-F57 WSP45G milling insert by Walter Tools — Tiger‑tec Gold, chipbreaker F57 The XNMU0906ANN‑F57 WSP45G is a negative‑rake milling insert engineered for versatile roughing and medium‑finish milling of Stahl, rostfreier Stahl and high‑temperature alloys, offering stable edge life in demanding machining environments. Tiger‑tec Gold PVD coating for long tool life Versatile for Stahl, rostfreier Stahl and Titan Negative 0° rake for stable cutting edge Chipbreaker F57 for controlled chip formation Predictable lifetime through advanced coating and grade The combination of Tiger‑tec Gold technology and a wear‑resistant, PVD‑based coated carbide substrate delivers a clear economic advantage: longer edge life and fewer indexings per part run. This grade, WSP45G, is formulated to balance toughness and wear resistance, which reduces unexpected rework and contributes to steady cycle times. The coated surface improves heat resistance and abrasion performance, translating into fewer tool changes and improved overall equipment efficiency. Consistent performance on difficult‑to‑machine materials Designed for the ISO groups P, M and S, the insert supports machining of Stahl (P), rostfreier Stahl (M) and heat‑resistant superalloys or Titan (S). The microstructure of this grade promotes controlled chip formation under the typical thermal loads encountered with these materials, while the specified chipbreaker F57 guides chip flow to prevent entanglement and ensure safe evacuation. As a result, process security is increased and surface integrity of the component is better preserved. Robust geometry for process security and easy integration The insert’s 0° (negative) rake angle and the proven chipbreaker geometry create a mechanically stable cutting edge that tolerates interruptions and variable cutting depths. With a size 09 outline and a thickness 06, the geometry offers a balance between cutting strength and accessibility in common milling cutters. The combination of grade, geometry and chip control supports reproducible results and simplifies parameter selection across batches, making integration into established machining centres straightforward. Contact Metav Werkzeuge today for tailored application advice on Walter Tools Tiger‑tec Gold inserts and to request a quotation. Technical Data SKU: XNMU0906ANN-F57-WSP45G-WALTER Designation: XNMU0906ANN-F57 WSP45G Product type: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core Data Size: 09 Thickness: 06 Rake angle: 0° (negative) Tolerance class: M Grade: WSP45G Chipbreaker: F57 Special features Coating / technology: Tiger‑tec Gold (PVD) Material applicability: Stahl, rostfreier Stahl, Titan / heat‑resistant superalloys Execution: U Suitable for roughing and medium finishing ISO designation: XNMU0906ANN-F57 WSP45G FAQ What materials can be machined with this insert? The XNMU0906ANN‑F57 WSP45G insert is intended for Stahl, rostfreier Stahl and high‑temperature alloys including Titan, corresponding to ISO groups P, M and S. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating on the WSP45G grade enhances heat and wear resistance, resulting in longer tool life and fewer indexings during continuous milling operations. What is the purpose of the chipbreaker F57? The chipbreaker F57 controls chip geometry for safe evacuation and stable cutting forces, improving process security and reducing the risk of chip entanglement. Which cutter types accept this insert outline and size? The ISO designation XNMU0906ANN‑F57 indicates compatibility with standard insert seats for size 09 milling indexes; the negative 0° rake and thickness 06 suit cutters requiring robust edge strength. Is this insert suitable for interrupted cuts or unstable clamping conditions? Yes — the negative rake and the balanced grade formulation provide a mechanically stable cutting edge that tolerates interruptions and variable loads while maintaining edge integrity. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Die Walter AG (marketed as Walter Tools) is part of the Sandvik group. Registered trademarks and product names remain the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any commercial relationship.
XNMU0906ANN-F67 WKP35G Wendeplatten - Walter Tools
Benefit from high productivity and consistent tool life thanks to the combination of the Tiger‑tec Gold coating and the WKP35G grade; the robust geometry and chipbreaker F67 ensure stable chip formation for efficient milling in steel and cast iron. Order the XNMU0906ANN-F67 WKP35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. XNMU0906ANN-F67 WKP35G milling insert — Tiger‑tec Gold grade for steel and cast iron (Walter Tools) A high-performance XNMU0906ANN-F67 WKP35G milling insert engineered for productive machining of ISO P (steel) and ISO K (cast iron) applications. Tiger‑tec Gold coated carbide grade WKP35G Optimised chip control F67 for stable machining 0° negative rake for secure engagement Suitable for steel and cast iron (ISO P / K) Achieve higher productivity with extended edge life The combination of the Tiger‑tec Gold coating and the WKP35G substrate delivers coated carbide wear resistance that translates into longer tool life and fewer tool changes. This has a direct effect on cycle times and overall shop-floor efficiency: consistent edge strength under typical milling loads reduces downtime for index changes and supports steady production flow. The grade is designed for the thermal and mechanical demands of machining steel, while retaining abrasive wear resistance for cast iron, giving a versatile performance across common workpiece materials. Consistent chip control and secure cutting engagement The insert geometry with chipbreaker F67 and the 0° negative rake are combined to produce predictable chip forms and secure cutting engagement, particularly in interrupted or heavy milling operations. The controlled chip flow reduces the risk of chip re-cutting and improves surface quality, while the neutral rake increases edge robustness for stability under variable load. For process planners this means fewer scrap parts and more reproducible results when exchanging inserts or shifting between similar jobs. Practical compatibility and machining guidance Designed to the ISO designation XNMU0906ANN-F67 WKP35G, the insert fits standard pockets for this format and is available in the execution indicated. The tolerance class M supports consistent positioning and repeatable results in modular milling systems. As the grade targets ISO P / K materials, it is well suited for general-purpose roughing and medium finishing in steel and cast iron components. If machining parameters need optimisation for specific alloys or cutter setups, further technical data and cutting recommendations are available from the supplier to adapt feed and speed for ideal tool life and surface finish. Discuss machining requirements with Metav Werkzeuge and specify the XNMU0906ANN-F67 WKP35G insert from Walter Tools for optimised steel and cast iron milling — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: XNMU0906ANN-F67-WKP35G-WALTER Product type: Fräswendeschneidplatte (milling insert) Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Key figures Plate size: 09 Plate thickness: 06 Free rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: F67 Coating / substrate: coated carbide Material suitability: P / K (steel / cast iron) Execution: U ISO designation: XNMU0906ANN-F67 WKP35G FAQ What materials is this insert suitable for? The XNMU0906ANN-F67 WKP35G milling insert from Walter Tools is specified for ISO groups P and K, addressing machining of steel (P) and cast iron (K). What benefit does the Tiger‑tec Gold technology provide? Tiger‑tec Gold brings a coated carbide surface that improves wear resistance and heat tolerance; the WKP35G grade offers balanced performance for longer cutting life in many steel and cast iron operations. How does the 0° negative rake affect milling performance? A 0° negative rake increases edge robustness and secure engagement, making the insert suitable for interrupted cuts and demanding milling where a stable cutting edge is preferred. Which chipbreaker is fitted and what advantage does it give? The insert features chipbreaker F67, which promotes stable chip formation and controlled evacuation, supporting consistent surface finish and reduced re-cutting. Is the insert compatible with standard cutter pockets? The ISO designation XNMU0906ANN-F67 WKP35G indicates the format; compatibility depends on pocket size and seat specification—match the cutter pocket for the '09' plate size and check tolerance class M for repeatable seating. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNMU0906ANN-F67 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of a high‑performance insert that combines coated carbide resilience, an F67 chipbreaker tailored for secure chip control, and a 0° negative clearance for edge strength; order directly via Metav Werkzeuge or consult specialists for process‑specific advice. XNMU0906ANN-F67 WSM45X milling insert – coated carbide, 0° negative clearance | Walter Tools The XNMU0906ANN-F67 WSM45X is a milling indexable insert designed for machining rostfreier Stahl and heat‑resistant superalloys, offering robust edge stability and optimised chip control Coated carbide grade WSM45X for tough materials Optimised F67 chipbreaker for secure chip control 0° negative clearance for robust edge stability For rostfreier Stahl and heat‑resistant superalloys High process reliability when machining tough alloys The insert’s WSM45X carbide grade is engineered for materials that challenge conventional tooling: rostfreier Stahl (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). The coated carbide composition promotes stable chip formation and resists thermal loading during interrupted or heavy cuts. Where materials tend to work‑harden or produce built‑up edge, this insert supports a consistent cutting action that reduces rework and stabilises cycle times. The result is a measurable improvement in process reliability and predictable component quality. Precise chip control that protects the cutting edge The integrated F67 chipbreaker is optimised for secure chip separation in demanding materials. By promoting short, controllable chips, the geometry reduces the risk of chip re‑welding and keeps the rake face cleaner, which contributes to prolonged tool life and fewer production interruptions. In practice, improved chip control lowers scrap rates and assists in maintaining consistent surface finish, particularly on components where tight tolerances and repeatability are essential. Robust negative geometry for heavy milling tasks A 0° (negative) clearance angle increases edge strength and supports aggressive axial and radial depths of cut. This negative geometry makes the insert particularly suitable for roughing and semi‑finishing operations where mechanical stability is prioritised over shear‑dominant cutting. Combined with the insert’s form factor (size 09, thickness 06) and tolerance class M, the geometry offers a reliable balance between rigidity and insert change frequency, helping to maintain steady production flow in high‑load machining scenarios. Practical benefits for production and tool selection Integrating this insert into existing toolholders and milling systems delivers immediate process benefits: better edge life in challenging materials, more stable surface quality, and fewer unscheduled tool changes. The combination of coated carbide, dedicated chipbreaker, and a sturdy negative geometry makes the grade well suited to shops facing diverse component mixes that include rostfreier Stahl and high‑temperature alloys. For teams seeking predictable tooling performance under demanding conditions, this insert supports efficient material removal with controlled tool wear. For process‑critical rostfreier Stahl and superalloy milling, request tailored technical advice from Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tool selection and ordering. Technical data Article number: XNMU0906ANN-F67-WSM45X-WALTER Label: Fräswendeschneidplatte XNMU0906ANN-F67 WSM45X Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Grade / sort: WSM45X Chipbreaker: F67 Clearance angle: 0° (negativ) Plate size: 09 Plate thickness: 06 Tolerance class: M Execution: U Special features Coated carbide grade WSM45X Optimised chip control geometry F67 Suited for rostfreier Stahl (ISO group M) Suited for heat‑resistant superalloys and titanium (ISO group S) Robust negative geometry for heavy cutting FAQ What materials is this insert suitable for? The XNMU0906ANN-F67 WSM45X insert is suitable for machining rostfreier Stahl (ISO M) and heat‑resistant superalloys and titanium (ISO S), as indicated by the WSM45X grade and the F67 chipbreaker. How does the F67 chipbreaker improve machining? The F67 geometry promotes short, controllable chips and reduces the risk of built‑up edge on the rake face, which supports longer tool life and consistent surface finish when using the XNMU0906ANN-F67 insert. What advantage does the 0° negative clearance provide? A 0° negative clearance increases edge strength and stability under heavy cutting loads, making the insert well suited to roughing and semi‑finishing operations with high mechanical stresses. Is this insert compatible with standard Walter toolholders? The insert follows standard form and size conventions (size 09, thickness 06) and is intended for use in compatible Walter‑type milling systems; toolholder compatibility should be verified against the specific holder and application conditions. Which product series does this insert belong to and what does that mean? This item is part of the Walter Schneidstoffsorte series and the WSM45X sort, meaning it is a coated carbide grade optimised for demanding materials and process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Brand names and registered trademarks are the property of their respective owners. Trademarks and product names are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the listed brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
XOEN12T308R-A-A88 WDN20 WDN20 Wendeplatten - Walter Tools
Take advantage of the WDN20 PCD grade and the precision 0.8 mm corner radius for long tool life and consistent surface quality in non‑ferrous machining. The A‑A88 chipbreaker promotes reliable chip control and reduces secondary operations. Order the insert directly via Metav Werkzeuge or request consultation from the technical advisors. XOEN12T308R-A-A88 WDN20 – Milling indexable insert, PCD grade (Walter Tools) XOEN12T308R-A-A88 WDN20 is a milling indexable insert designed for high‑wear, high‑precision machining of non‑ferrous and abrasive non‑ferrous materials High-wear PCD grade WDN20 0.8 mm corner radius for consistent finish A-A88 chipbreaker for clean chip control Universal 12 mm inscribed circle size Durable cutting performance for abrasive non‑ferrous workpieces The WDN20 specification denotes a polycrystalline diamond (PCD) cutting grade engineered for exceptional wear resistance when machining abrasive, non‑iron materials. This makes the insert particularly suitable for applications where surface integrity and long tool life matter, such as machining composites, aluminium alloys with high silicon content and other abrasive non‑ferrous workpieces. The result is fewer tool changes, consistent dimensional accuracy and improved process economy — measurable benefits that support higher productivity and lower per‑part tooling cost. Geometry and chip control that protect productivity A precise 0.8 mm corner radius and the A‑A88 chipbreaker geometry deliver stable cutting edges and controlled chip formation. The combination of radius and chipbreaker reduces edge chipping and helps maintain a repeatable surface finish, which minimises rework and downstream finishing. For milling operations demanding fine surface quality and predictable tool behaviour, these geometric features translate into shorter cycle times and more consistent part quality across batches. Practical guidance and compatibility notes The insert is listed with a 12 inscribed circle and thickness coded T3, with designation XOEN12T308R‑A‑A88 and execution N. The cutting grade is part of the Walter Schneidstoffsorte — Serie offen and is marked WDN20. As the grade is PCD, suitability for specific alloys should be verified against the manufacturer product matrix before series use. For customers requiring application‑specific recommendations, Metav Werkzeuge’s technical advisors can assist with feed/speed windows and material pairing to ensure optimal results. Choose the WDN20 PCD insert from Walter Tools for abrasion‑resistant milling tasks and contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: XOEN12T308R-A-A88-WDN20-WALTER Label: Fräswendeschneidplatte XOEN12T308R-A-A88 WDN20 Walter Tools Grade: WDN20 (PCD) Series: Walter Schneidstoffsorte - Serie offen Designation without grade: XOEN12T308R-A-A88 Execution: N Tolerance class: E Facts Inscribed circle: 12 Corner radius: 0.8 Thickness: T3 Chipbreaker: A-A88 Special features Material designation: Katalogabhängig Cutting material type: Polycrystalline diamond (PCD) — high wear resistance Typical application: Non‑ferrous and abrasive non‑ferrous materials (check product matrix) Series information: Walter Schneidstoffsorte - Serie offen Manufacturer brand: Walter Tools FAQ What materials is this insert primarily intended for? The XOEN12T308R‑A‑A88 WDN20 insert is intended primarily for non‑ferrous and abrasive non‑ferrous materials; the PCD grade provides long life on such workpieces. Is the WDN20 grade suitable for steel or iron machining? Polycrystalline diamond grades such as WDN20 are generally not recommended for ferrous materials due to chemical affinity at cutting temperatures; suitability should be confirmed via the product matrix before use. What does the A‑A88 chipbreaker deliver in practice? The A‑A88 chipbreaker promotes controlled chip formation and evacuation, leading to improved surface finish and reduced risk of edge damage during milling. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius balances edge strength and surface quality, offering repeatable edge life and consistent finishing characteristics in intermittent milling or finishing passes. Where can machining parameters and compatibility be found? Feed and speed recommendations and material compatibility for the WDN20 grade are available in the manufacturer product matrix and technical documentation for the insert; consult those resources for process optimisation. Manufacturer: Walter Tools / Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. The mentioned brand names and trademarks are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
XOEN12T308R-F-A88 WDN20 Wendeplatten - Walter Tools
Take advantage of the combination of PCD-grade wear resistance, precise geometry and a compact 12 mm size for reliable machining of abrasive non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. XOEN12T308R-F-A88 WDN20 milling indexable insert by Walter Tools — PCD grade, 0.8 mm corner radius XOEN12T308R-F-A88 WDN20 is a milling indexable insert designed for high‑wear resistance in abrasive, non‑ferrous machining applications PCD cutting material WDN20 for abrasive non‑ferrous 0.8 mm corner radius for stable cutting edge Compact 12 mm plate size for versatile tool holders Chipbreaker F‑A88 for consistent chip control High wear resistance suited to abrasive non‑ferrous materials The polycrystalline diamond (PCD) grade WDN20 provides exceptional wear resistance, making the insert particularly effective for machining abrasive, non‑ferrous workpieces. PCD combines a hard diamond cutting layer on a substrate to resist abrasive wear and maintain a sharp edge over extended runtimes. This performance translates into fewer indexings and longer effective tool life, which supports higher uptime and predictable machining cycles. Check the product matrix for specific workpiece compatibility before series use. Geometry that improves surface quality and repeatability Engineered with a 0.8 mm corner radius and tolerance class E, the insert’s geometry promotes a robust cutting edge and consistent engagement with the workpiece. The F‑A88 chipbreaker is shaped to control chip formation and evacuation, reducing the risk of built‑up edge and helping to preserve surface finish. The compact 12 mm plate size and T3 thickness suit modern milling toolholders where space and stability are factors, enabling precise, repeatable results across serial production. Process reliability and economic throughput in production Belonging to the Walter cutting grade series, the insert supports stable performance in production environments where abrasive non‑ferrous materials are processed. Stable edge life and controlled chip formation reduce downtime for re‑tooling and inspection, contributing to measurable economic benefits over time. Where cycle consistency and reduced tooling interventions are priorities, the insert’s PCD construction and optimised chip geometry support reliable throughput and predictable maintenance intervals. For application guidance on Walter Tools XOEN12T308R-F-A88 WDN20 inserts, contact Metav Werkzeuge for tailored recommendations and technical data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XOEN12T308R-F-A88-WDN20-WALTER Item designation: XOEN12T308R-F-A88 WDN20 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WDN20 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: T3 Chipbreaker: F‑A88 Tolerance class: E Special features Cutting material: polycrystalline diamond (PCD) Material specification: Katalogabhängig Execution: N FAQ What materials is this insert intended for? The XOEN12T308R‑F‑A88 WDN20 insert is intended primarily for abrasive, non‑ferrous materials where the PCD grade WDN20 provides superior wear resistance. How does the chipbreaker F‑A88 affect machining? The F‑A88 chipbreaker on the XOEN12T308R‑F‑A88 WDN20 promotes controlled chip formation and evacuation, which helps maintain surface quality and reduces edge build‑up during continuous milling. Is the insert suitable for small toolholders? Yes. The compact 12 mm plate size and T3 thickness make the insert compatible with smaller milling bodies while retaining a stable cutting edge due to the 0.8 mm corner radius. Are there special precautions before series use? Verify workpiece compatibility with the product matrix for the WDN20 grade; the manufacturer information indicates PCD is optimised for abrasive non‑ferrous materials and specific machining parameters should be validated in trial cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trade marks are mentioned for explanatory purposes only. The offered article is an original, factory‑new product of the manufacturer.
XOEN12T3AZR-A-A88 WDN20 Wendeplatten - Walter Tools
Take advantage of the combination of WDN20 polycrystalline diamond grade, a precise A-A88 chipbreaker and a robust T3 plate thickness for extended tool life and consistent chip control; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. XOEN12T3AZR-A-A88 WDN20 milling insert by Walter Tools — PKD grade for non-ferrous materials The XOEN12T3AZR-A-A88 WDN20 is a precision milling insert intended for high-wear machining of non-ferrous and abrasive non-ferrous materials, combining a PKD cutting edge with a chipbreaker geometry for stable, repeatable performance. PKD grade WDN20 for abrasive work 12 mm insert diameter for stable engagement A-A88 chipbreaker for consistent chip control T3 thickness for robust clamping Longer service life through a wear-resistant cutting grade The combination of WDN20 and polycrystalline diamond (PKD) provides outstanding wear resistance when machining abrasive, non-ferrous materials. This grade is selected to reduce flank wear and abrasion-related tool failures, which translates into fewer tool changes and increased uptime. As a direct benefit for production, the improved durability supports a more predictable tool life and lower overall tooling costs while maintaining surface quality on softer, abrasive alloys. Predictable chip behaviour and surface quality from optimised geometry The A-A88 chipbreaker and the insert’s geometry are configured to deliver consistent chip control and reliable cutting engagement. With a 12 mm nominal plate size and T3 thickness, the design ensures mechanical stability during milling operations, improving dimensional repeatability and surface finish. For process planners, this means fewer scraping or rework steps and a smoother workflow when integrating the insert into standard toolholders for serial production. Practical application advice and material compatibility The insert is part of the Walter Schneidstoffsorte open series and its material specification is catalogue-dependent, so compatibility with specific alloys should be verified against the product matrix. The XOEN12T3AZR-A-A88 WDN20 is particularly suitable for aluminium alloys, brass and other non-ferrous substrates where PKD offers superior abrasion resistance; if machining complex or coated workpieces, confirm the match of grade and geometry to the workpiece material to achieve optimal results. For detailed parameter recommendations and material-specific guidance, consult the technical data sheet or the Metav Werkzeuge advisory service. Contact Metav Werkzeuge for tailored PKD application recommendations and to discuss the best machining parameters for Walter Tools inserts Technical data Article number / SKU: XOEN12T3AZR-A-A88-WDN20-WALTER Product type: Fräswendeschneidplatte (milling insert) ISO designation: XOEN12T3AZR-A-A88 WDN20 Core data Series / grade: Walter Schneidstoffsorte - Serie offen / WDN20 Plate size: 12 Plate thickness: T3 Tolerance class: E Special features Chipbreaker: A-A88 Material (tool): Katalogabhängig Sort description: Polykristalliner Diamant (PKD) for abrasive, non-ferrous materials Execution: N FAQ What materials is this PKD insert intended for? The XOEN12T3AZR-A-A88 WDN20 insert from Walter Tools is intended primarily for non-ferrous and abrasive non-ferrous materials; suitability should be checked against the product matrix for specific alloys. How does the A-A88 chipbreaker affect machining? The A-A88 chipbreaker promotes predictable chip formation and evacuation, improving surface finish and reducing the risk of built-up edge during milling. Is the material specification fixed for this insert? The material for the insert is catalogue-dependent; refer to the technical documentation for exact substrate and coating details relevant to WDN20. Can this insert be used for high-speed milling of aluminium? Yes—WDN20 PKD is designed for abrasive non-ferrous materials such as aluminium alloys, subject to confirming cutting parameters and machine capability. Which SKU should be ordered for this configuration? Order the SKU XOEN12T3AZR-A-A88-WDN20-WALTER to receive the exact Walter Tools milling insert as described. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Walter AG (trading as Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are used here for explanation only; there is no affiliation implied between our company and the trademark holders.
XOEX12T308N-F-A88 WDN20 WDN20 Wendeplatten - Walter Tools
Take advantage of the WDN20 PKD grade and the F‑A88 chipbreaker combined with a robust 0.8 mm corner radius to achieve reliable, abrasion-resistant machining of non‑ferrous and abrasive materials; order or discuss technical needs via Metav Werkzeuge for seamless integration into production. XOEX12T308N-F-A88 WDN20 — Walter Tools milling indexable insert with PKD grade and 0.8 mm corner radius The XOEX12T308N-F-A88 WDN20 is a PKD milling insert designed for demanding machining of abrasive, non‑ferrous materials where long life and consistent edge performance are required. PKD grade WDN20 for abrasive materials 12 mm insert size for stable clamping 0.8 mm corner radius for edge strength Chipbreaker F‑A88 for controlled chip formation Maximise uptime with a wear‑resistant PKD grade The core advantage of this insert is its polykristalliner Diamant (PKD) grade, marketed as WDN20, which provides exceptional abrasion resistance on non‑ferrous and other abrasive materials. PKD is not a universal solution for all substrates: it delivers superior tool life and process stability when machining aluminium alloys with abrasive fillers, graphite, or certain composites. The result is fewer tool changes and more predictable cycle times, which can reduce overall production costs while maintaining surface consistency. Consistent surface quality through engineered geometry The combination of a 0.8 mm corner radius and the F‑A88 chipbreaker produces a balance between edge strength and chip control. A larger corner radius supports edge durability and reduces the risk of premature chipping, contributing to steady surface finish and repeatability. The chipbreaker is designed to form short, evacuable chips in interrupted or continuous cuts, improving swarf evacuation and reducing heat build‑up. These geometric choices support reliable finishing with less rework. Practical benefits for process engineers and workshops With a nominal 12 mm insert size and designation T3 thickness, the insert fits compact milling pockets that require a combination of rigidity and fine edge control. The format supports stable clamping and minimal vibration, which translates into improved tool life and predictable performance across batch runs. For planning purposes, suitability should be confirmed against the manufacturer’s product matrix, since the WDN20 grade excels on abrasive, non‑ferrous alloys but is not intended for standard steels or hardened materials. Application guidance and support for implementation For machinists and process planners, integrating this PKD insert into existing setups typically results in reduced downtime and improved throughput on abrasive workpieces. When in doubt about feed and speed recommendations, refer to the tool data sheet or contact Metav Werkzeuge for tailored cutting data and application advice. The insert’s performance is optimised when paired with appropriate cutter bodies and rigid fixturing; correct selection of coolant or dry‑cutting strategy further affects service life and surface integrity. Contact Metav Werkzeuge for application support and to secure Walter Tools PKD inserts for abrasive non‑ferrous machining Technical Data SKU: XOEX12T308N-F-A88-WDN20-WALTER Article designation: XOEX12T308N-F-A88 WDN20 Type: Milling indexable insert Manufacturer: Walter Tools Facts Insert size: 12 mm Corner radius: 0.8 mm Thickness: T3 Tolerance class: E Special features Grade: WDN20 (PKD) Chipbreaker: F‑A88 Series: Walter Schneidstoffsorte - Serie offen Designation without grade: XOEX12T308N-F-A88 FAQ What materials is this insert best suited for? The WDN20 grade is a PKD formulation intended primarily for abrasive, non‑ferrous materials; suitability should be checked against the product matrix for specific alloys and composites. How does the chipbreaker F‑A88 influence machining? The chipbreaker F‑A88 promotes controlled chip formation and evacuation, reducing heat and supporting consistent surface finish when using the WDN20 PKD insert. Can this insert be used on steel or hardened parts? WDN20 (PKD) is focused on non‑ferrous and abrasive substrates; it is generally not recommended for standard steels or hardened materials—consult the product matrix before use. What does the 0.8 mm corner radius mean for finishing? A 0.8 mm corner radius increases edge strength and reduces chipping, delivering improved repeatability and a reliable surface finish in interrupted or finishing cuts. Which cutter bodies accept this insert format? The insert is a standard 12 mm format designed for compatible milling cutters; verify pocket compatibility and clamping method with the cutter body manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XOEX12T3AZR-F-A88 WDN20 Wendeplatten - Walter Tools
Take advantage of the PCD grade and the F‑A88 chipbreaker to achieve reliable chip control and extended edge life in abrasive, non‑ferrous production; order the insert directly via Metav Werkzeuge or consult the experts for application guidance. XOEX12T3AZR-F-A88 WDN20 — Milling indexable insert by Walter Tools (PCD, size 12) The XOEX12T3AZR-F-A88 WDN20 is a high‑wear‑resistance milling insert intended for machining abrasive, non‑ferrous materials and other demanding non‑ferrous applications. Polycrystalline diamond (PCD) cutting material Designed for abrasive, non‑ferrous materials Size 12 insert with T3 thickness Chipbreaker F‑A88 for consistent chip control Exceptional durability for abrasive non‑ferrous machining The PCD composition of this insert provides outstanding wear resistance, making it particularly economical for prolonged runs on abrasive non‑ferrous alloys and materials where conventional carbide would wear prematurely. Compared with standard grades, the polycrystalline diamond edge offers a consistently sharp cutting face and reduced flank wear, which translates into longer in‑service intervals and fewer tool changes. For process planning, verify the material matrix to match the grade to the specific non‑ferrous alloy or composite being machined. Geometry and tolerance for dependable production results The insert’s geometry, combined with the F‑A88 chipbreaker, is designed to produce repeatable chip formation and controlled evacuation during high‑feed milling, reducing the risk of rework and machine downtime. The designation indicates an insert size 12 and T3 thickness, with tolerance class E for dimensional stability; these parameters support accurate seat‑to‑seat positioning and consistent cutting behaviour across production batches. The result is improved surface finish and predictable tool life, which benefits cycle time and cost per part. Practical handling, tool integration and application notes The indexable plate is intended for integration into standard milling holders compatible with its geometry; the basic designation and series information should be used to select the correct seat and clamping method. The product series is listed as Walter Schneidstoffsorte – Serie offen and the grade is WDN20 (PCD); machining parameters and suitable feeds should be determined from the Walter application matrix and verified under the shop’s cutting conditions. When processing highly abrasive or fibrous non‑ferrous materials, optimised coolant strategy and stable workholding will enhance the insert’s performance and extend its service life. Contact Metav Werkzeuge to discuss the Walter Tools XOEX12T3AZR-F-A88 WDN20 for specific material applications, request the product matrix, or obtain cutting parameter recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: XOEX12T3AZR-F-A88-WDN20-WALTER ISO designation: XOEX12T3AZR-F-A88 WDN20 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Insert size: 12 Insert thickness: T3 Chipbreaker: F‑A88 Tolerance class: E Special features Grade: WDN20 (polycrystalline diamond, PCD) Series: Walter Schneidstoffsorte - Serie offen Material specification: Katalogabhängig FAQ What materials is this insert suitable for? The XOEX12T3AZR‑F‑A88 WDN20 is intended primarily for abrasive, non‑ferrous materials; the WDN20 PCD grade is optimised for such applications, and the product matrix should be consulted for specific alloys. How does the F‑A88 chipbreaker benefit machining? The F‑A88 chipbreaker on this Walter Tools insert promotes consistent chip segmentation and evacuation, improving surface finish and reducing the likelihood of built‑up edge during extended milling cycles. What does the tolerance class E mean for production? Tolerance class E indicates close dimensional control for the insert geometry, supporting accurate seat alignment and reproducible cutting behaviour in serial production when using the XOEX12T3AZR‑F‑A88 WDN20. Is this insert compatible with standard milling holders? The insert’s ISO designation and geometry should be matched to holders designed for this insert form; the designation XOEX12T3AZR‑F‑A88 gives the necessary reference for selecting compatible clamping systems. Are there any special handling or setup recommendations? For best results with the WDN20 PCD grade, use stable workholding, appropriate coolant or air‑blast as advised by the product matrix, and validate feed and speed parameters under actual cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
ZDGT150404R-K85 WK10 Wendeplatten - Walter Tools
Take advantage of precise chip control with the K85 chipbreaker, the robust WK10 uncoated carbide grade and the compact 15 mm format for reliable milling results; order directly via Metav Werkzeuge or consult the team for application-specific advice. ZDGT150404R-K85 WK10 milling indexable insert — K85 chipbreaker, 15° clearance (Walter Tools) ZDGT150404R-K85 WK10 is an indexable milling insert designed for general milling tasks where stable chip formation and repeatable performance are required Uncoated carbide grade WK10 for general-purpose use K85 chipbreaker for consistent chip control 15° clearance angle for stable cutting engagement 0.4 mm corner radius for finishing operations Consistent chip control for higher throughput The combination of the K85 chipbreaker and the uncoated WK10 carbide grade delivers predictable chip formation, which reduces recutting and stabilises cycle times on series production. The chip geometry is tuned to evacuate chips reliably in mixed cutting conditions, resulting in fewer interruptions and a smoother machining process. For operations that prioritise throughput, this insert supports steady feed rates while maintaining toolpath consistency and reducing the need for frequent operator intervention. Predictable edge performance and dimensional stability A 15° clearance angle and a 0.4 mm corner radius help to balance cutting forces and edge exposure, improving both tool life and repeatability. The defined corner radius aids in achieving consistent part radii and reduces the likelihood of burr formation on sensitive features. By choosing an insert with these characteristics, shops benefit from reduced rework and stable tolerances across batches, which contributes to predictable production costs and workflow planning. Surface finish and finishing capability in a compact format The compact 15 mm plate size paired with the specified plate thickness ensures the insert is well suited to constrained toolholders and multi-flute cutter bodies where space is limited. The small corner radius and well-controlled cutting geometry support improved surface quality on machined faces, making the insert suitable for semi-finishing and finishing passes in many materials. Clear explanations of terms: the grade designation denotes an uncoated carbide tuned for broad applicability, while the chipbreaker refers to the topological groove that shapes chips during cutting. Practical integration into production and stocking Supplied in the Walter open series, the insert matches common cutter plate pockets and simplifies inventory by covering a range of general milling tasks. The uncoated nature of the grade makes the insert versatile across a variety of workpiece materials according to application matrices, and the standard geometry supports straightforward process parameter setting. For purchasing and line-side stocking, the compact specification aids in efficient toolholder combinations and simplifies changeover planning. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools inserts and ensure the correct grade selection for each machining task — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ZDGT150404R-K85-WK10-WALTER Name: Fräswendeschneidplatte ZDGT150404R-K85 WK10 Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Designation: ZDGT150404R-K85 ISO designation: ZDGT150404R-K85 WK10 Grade series: Walter Schneidstoffsorte - Serie offen Facts Plate size: 15 mm Plate thickness: 04 Clearance angle: 15° Corner radius: 0.4 mm Tolerance class: G Special features Chipbreaker: K85 Grade: WK10 (uncoated carbide) Execution: T Series info: Walter open grade — verify workpiece suitability per product matrix FAQ What materials is this insert suitable for? The ZDGT150404R-K85 WK10 insert is specified as an uncoated carbide grade; material suitability should be checked against the Walter Tools product matrix to confirm applicability for particular steels and non-ferrous materials. How does the K85 chipbreaker influence machining? The K85 chipbreaker on the insert promotes reliable chip formation and evacuation, which helps maintain stable cutting forces and reduces interruptions during continuous milling operations. Can this insert be used for finishing passes? With a 0.4 mm corner radius and controlled geometry, the insert is suitable for semi-finishing and finishing operations where a fine surface and dimensional consistency are required. Is the clearance angle important for toolholder compatibility? Yes; the 15° clearance angle affects how the insert engages the workpiece and must match the cutter design and process parameters to achieve optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer (Walter Tools).
ZDGT150404R-K85 WNN15 Wendeplatten - Walter Tools
The combination of WNN15 coated-carbide grade, the K85 chipbreaker and a 15° clearance angle ensures stable chip control and consistent surface quality in diverse milling tasks; order the insert directly via Metav Werkzeuge or consult our team for application advice. ZDGT150404R-K85 WNN15 indexable milling insert — 15° clearance, 0.4 mm corner radius (Walter Tools) A ZDGT150404R-K85 WNN15 indexable milling insert designed for general milling operations where robust chip control and repeatable edge stability are required. Coated carbide grade WNN15 for broad application 15° clearance angle for versatile milling K85 chipbreaker for consistent chip formation 0.4 mm corner radius for defined edge strength Reliable cutting performance for demanding production The insert delivers consistent cutting behaviour through a combination of a modern coated-carbide grade and a dedicated chipformer. The WNN15 grade denotes a coated hardmetal designed to offer a balance between wear resistance and toughness; this supports longer tool life under variable cutting conditions. Coupled with the K85 chipbreaker, chips are guided predictably away from the cutting zone, reducing interruptions and improving cycle-time reliability. These technical choices translate into measurable production benefits: fewer index changes, improved surface finish stability and lower process variability. Geometry that secures dimensional accuracy and edge life The geometry of the insert—notably the 15° clearance angle and the 0.4 mm corner radius—is engineered to combine cutting efficiency with reliable edge strength. The clearance angle reduces rubbing on the flank face, lowering heat generation and preserving the cutting edge during interrupted cuts. Meanwhile, the small corner radius provides a defined cutting edge that supports repeatable feature definition on workpieces. The combination is particularly useful where controlled chip removal and precise edge definition are priorities; tolerance class G contributes to consistent seating and repeatable positioning in toolholders. Selection guidance and practical application notes Material suitability is indicated by the coated-carbide character of the grade, but specific application limits should be verified against the manufacturer matrix; the material information is catalogue dependent. Where the workpiece material is uncertain, reference to the product matrix or a cutting-data sheet is recommended to match feed and speed recommendations to the insert’s capabilities. For integration into existing tool assemblies the insert carries the ISO designation ZDGT150404R-K85 WNN15, enabling straightforward cross-referencing. For bespoke advice on cutting parameters or compatibility with certain steels, aluminium alloys or other substrate groups, Metav Werkzeuge can provide tailored recommendations and cutting-data assistance. For tailored milling solutions and to source Walter Tools inserts such as ZDGT150404R-K85 WNN15, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and order support Technical data Article number: ZDGT150404R-K85-WNN15-WALTER SKU: ZDGT150404R-K85-WNN15-WALTER Product type: Fräswendeschneidplatte (indexable milling insert) ISO designation: ZDGT150404R-K85 WNN15 Manufacturer: Walter Tools Facts / Core technical data Clearance angle: 15° Corner radius: 0.4 mm Size: 15 mm Thickness code: 04 Tolerance class: G Special features / Versions Grade: WNN15 (coated hardmetal) Chipbreaker: K85 Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Execution: T FAQ What materials is the insert suitable for? The insert is supplied in the WNN15 coated-carbide grade; material suitability should be checked in the manufacturer's product matrix and cutting-data documentation for the ZDGT150404R-K85 WNN15 insert. How does the K85 chipbreaker affect machining? The K85 chipbreaker promotes predictable chip formation and evacuation, which reduces the risk of built-up edge and helps maintain a consistent surface finish during milling. What does the 15° clearance angle mean for cutting performance? A 15° clearance angle reduces flank contact and heat at the cutting edge, improving tool life and performance during operations with interrupted cuts or varying depths of cut. Is the corner radius suitable for finishing passes? The 0.4 mm corner radius offers a defined cutting edge that can be used for finishing where a small, consistent radius is required; for ultra-fine finishes, selection of final-pass parameters is recommended. How can the insert be ordered or specified for tool assemblies? Specify the ISO designation ZDGT150404R-K85 WNN15 and Walter Tools as the manufacturer when ordering to ensure correct matching to the toolholder and process requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT150404R-K85 WXN15 Wendeplatten - Walter Tools
Benefit from the combination of the WXN15 uncoated carbide grade, K85 chipbreaker and a 15° relief angle for secure, efficient machining of non‑ferrous materials; order the ZDGT150404R-K85 WXN15 directly via Metav Werkzeuge or consult our technical advisors for application guidance. ZDGT150404R-K85 WXN15 milling indexable insert by Walter Tools — for non‑ferrous metals, 15° relief The ZDGT150404R-K85 WXN15 is an indexable milling insert designed for sharp, uncoated cutting of non‑ferrous materials in industrial milling applications. WXN15 uncoated carbide for non‑ferrous metals 15° relief angle for secure cutting geometry 0.4 mm corner radius for precise edge formation K85 chipbreaker for controlled chip evacuation Predictable performance when machining non‑ferrous metals The WXN15 grade is an uncoated carbide designed specifically for the ISO N group — non‑ferrous metals such as aluminium, copper and brass. The sharp edge geometry reduces material adhesion and minimises built‑up edge, which improves component finish and reduces rework. For production environments that require consistent cycle times, the combination of a sharp grade and a purpose‑built chipbreaker yields a measurable increase in process stability and reduces the need for frequent tool changes. The insert’s design supports higher feed rates while maintaining a reliable cut, so throughput improves without sacrificing surface quality. Better chip control for uninterrupted operation Chip management is critical in high‑speed milling of soft metals. The chipbreaker K85 promotes short, segmented chips that evacuate consistently, reducing the risk of entanglement and machine downtime. Together with the 15° relief angle and a 0.4 mm corner radius, the insert forms a stable cutting edge that resists edge deformation under typical cutting forces for non‑ferrous materials. This leads to predictable tool life and repeatable part quality, which is vital for lean production and tight tolerance work. Compact geometry for adaptable tool‑making The insert’s compact dimensions — plate size 15 and thickness code 04 — make it suitable for common tool holders in standard milling systems. The Walter N‑series engineering focus provides a balance between sharpness for NE‑metals and mechanical strength for reliable handling in production tools. As an indexable cutting solution, the item allows fast seat replacement and simple indexing, lowering the average machining cost per component and maintaining uptime in busy shops. Practical advantages in everyday use Beyond material compatibility, the combination of an uncoated substrate and targeted chip geometry reduces the need for specialised coolants when cutting aluminium alloys and similar materials, improving shop cleanliness and reducing fluid costs. The stable edge formation supports consistent surface finish over long production runs, and the standardised insert form facilitates stocking and fast replacement. For operations seeking predictable, economical milling of non‑ferrous parts, this insert provides a clear technical and commercial advantage. For personalised cutting data or to reserve Walter Tools WXN15 inserts for upcoming production batches, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and rapid delivery options Technical Data Article number: ZDGT150404R-K85-WXN15-WALTER Designation: ZDGT150404R-K85 WXN15 Manufacturer: Walter Tools Core Specifications Plate size: 15 Corner radius: 0.4 mm Relief angle: 15° Thickness code: 04 Materials & Special Features Grade: WXN15 (uncoated carbide) Chipbreaker: K85 Series: Walter N‑Sortensystem Execution: T Intended material group: Non‑ferrous metals (ISO group N) — aluminium, copper, brass FAQ What materials is this insert optimised for? The ZDGT150404R-K85 WXN15 milling insert from Walter Tools is optimised for ISO group N materials, specifically aluminium, copper and brass. How does the K85 chipbreaker benefit machining? The chipbreaker K85 on the ZDGT150404R-K85 WXN15 promotes controlled, short chips that improve evacuation and reduce the likelihood of chip jamming during milling of non‑ferrous metals. Can this insert deliver a good surface finish on aluminium? Yes, the combination of the WXN15 grade and the insert geometry on this Walter Tools milling insert supports fine surface quality during continuous aluminium machining. What does the 0.4 mm corner radius affect in practice? A 0.4 mm corner radius provides a balance between edge strength and the ability to machine tighter features, helping the ZDGT150404R-K85 WXN15 maintain dimensional accuracy and edge integrity. Is this insert suitable for coolant‑free machining? For many aluminium and similar NE‑metal applications, the uncoated WXN15 grade and K85 chip control allow effective machining with reduced coolant use; specific results depend on alloy and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ZDGT150408R-K85 WK10 Wk10 Wendeplatten - Walter Tools
Take advantage of the combination of uncoated carbide WK10, a 15° free angle, and a purposeful K85 chipbreaker for reliable, productive milling. Order the insert directly via Metav Werkzeuge or consult the Metav team for matching the grade to the application. ZDGT150408R-K85 WK10 — indexable milling insert with 15° free angle by Walter Tools ZDGT150408R-K85 WK10 is an indexable milling insert designed for general milling operations where versatile edge geometry and predictable chip control are required ZDGT150408R-K85 WK10 indexable milling insert Uncoated carbide grade WK10 for general use 15° free angle for optimised cutting geometry 0.8 mm corner radius and K85 chipbreaker Higher productivity through robust grade and geometry The insert is supplied in the WK10 grade, an uncoated carbide option from the Walter open series that balances toughness and wear resistance. This composition supports a reliable edge for interrupted cuts and routine milling tasks, while the uncoated surface reduces thermal sensitivity in certain feeds and speeds. The combination of WK10 and the K85 chipbreaker helps maintain consistent chip formation, which in turn reduces downtime for chip clearing and supports a more predictable process window—an advantage when cycle time and throughput matter most. Controlled cutting forces and consistent surface results A 15° free angle modifies the clearance behind the cutting edge to lower friction and reduce radial cutting forces; this geometry can improve tool engagement in shoulder and slot milling. The 0.8 mm corner radius increases edge strength compared with a sharp corner and contributes to a steadier surface finish when machining light to moderate depths of cut. These geometry parameters together mean fewer edge failures and more consistent dimensional outcomes on repeated components, supporting stable production quality and fewer reworks. Chip management and application flexibility The K85 chipbreaker is engineered to support reliable chip breaking across a range of standard milling conditions. Effective chip control reduces the risk of recutting and promotes safe evacuation of swarf from the cutting zone, which is particularly valuable in automated or multi-tool setups. The insert’s designation and tolerance class G enable predictable indexing and repeatability in toolholders designed for standardised insert shapes. For specific material compatibility, consult the manufacturer’s product matrix to confirm machining recommendations for particular alloys or specialised materials. Discuss process requirements with Metav Werkzeuge to confirm suitability of the ZDGT150408R-K85 WK10 insert and receive tailored recommendations for cutter bodies and cutting parameters. Technical data Article number: ZDGT150408R-K85-WK10-WALTER Item designation: ZDGT150408R-K85 WK10 Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Plate size: 15 Plate thickness: 04 Free angle: 15° Corner radius: 0.8 mm Tolerance class: G Special features Chipbreaker: K85 Grade: WK10 (uncoated carbide) Execution: T Base designation: ZDGT150408R-K85 FAQ What does the WK10 designation mean for machining? WK10 signifies an uncoated carbide grade from the Walter open series; users should consult the product matrix for detailed material recommendations and cutting conditions. How does the 15° free angle affect performance? A 15° free angle reduces contact behind the cutting edge, lowering friction and cutting forces to support smoother tool engagement and improved edge life under many milling conditions. Which benefits does the K85 chipbreaker provide? The K85 chipbreaker promotes controlled chip formation, helping to prevent long, stringy swarf and enabling safer, more consistent chip evacuation in general milling tasks. Is the ZDGT150408R-K85 suitable for high-speed finishing? The ZDGT150408R-K85 WK10 insert offers a balance of toughness and wear resistance; suitability for high-speed finishing depends on the workpiece material and cutting parameters—refer to the product matrix for precise guidance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the respective manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com