XNHX130640R-L65T WSP45G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold PVD grade, the robust 4 mm corner radius and the 0° (negative) rake for a consistent, high‑productivity milling process; order the XNHX130640R-L65T WSP45G directly via Metav Werkzeuge or ask our consultants for cutting parameters and batch availability. XNHX130640R-L65T WSP45G milling insert — Tiger·tec Gold PVD, 0° (negative) — Walter Tools XNHX130640R-L65G WSP45G is a precision milling insert engineered for stable face and shoulder milling of steel, rostfreier Stahl and heat‑resistant superalloys including titanium Tiger·tec Gold PVD coating For steel, rostfreier Stahl and superalloys 0° (negative) rake for stable cutting 4 mm corner radius for high edge strength Reliable cutting performance for mixed material production The combination of the Tiger·tec Gold coating and a coated carbide substrate delivers consistent performance across a wide range of materials classified as P, M and S. This means the insert tolerates the typical heat and varying chip formation encountered when machining unalloyed and alloyed steel, tougher rostfreier Stahl grades and demanding superalloys/titanium. The result is predictable tool life and fewer interruptions on production lines, which supports steady throughput and lower overall machining cost-per-part. Emphasis on repeatable behaviour helps process planners set more aggressive but safe cutting windows. Secure edge and chip control for heavy and interrupted cuts A 0° (negative) rake combined with the pronounced 4 mm corner radius provides a mechanically strong cutting edge that resists chipping under load and during interrupted cuts. The integrated L65T chipbreaker promotes consistent chip formation and evacuation, reducing the risk of built‑up edge and surface damage. For operations that demand robust edge stability—such as shoulder milling and slot entry—the insert’s geometry reduces vibration and improves surface integrity, enabling longer tool cycles and fewer indexing stops. Application guidance and process benefits in practice Designed as a versatile PVD grade for milling, the insert supports a range of cutting strategies from moderate to high feed machining while maintaining surface quality and dimensional stability. The execution code and tolerance class indicate a manufacturing quality aligned with industrial expectations: repeatable fit in standard toolholders and predictable seating behaviour. Backed by the manufacturer’s engineering approach, this insert is appropriate where process security and consistent surface finish are priorities, particularly in mixed‑material production environments that require one versatile grade rather than multiple specialised grades. Contact Metav Werkzeuge for tailored cutting data, delivery options and technical consultation on Walter Tools Tiger·tec Gold inserts and their optimal machining parameters Technical Data Article number: XNHX130640R-L65T-WSP45G-WALTER Label: Fräswendeschneidplatte XNHX130640R-L65T WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Plate thickness: 06 Corner radius: 4 mm Plate size: 13 Relief angle: 0° (negative) Tolerance class: H Special features Grade: WSP45G Coating / technology: Tiger·tec Gold PVD Chipbreaker: L65T Execution: X Material suitability: P / M / S (steel, rostfreier Stahl, superalloys/titanium) Designation: XNHX130640R-L65T FAQ Which materials is the XNHX130640R-L65T WSP45G suitable for? The XNHX130640R-L65G WSP45G is specified for machining materials in groups P, M and S — covering steel, rostfreier Stahl and heat‑resistant superalloys including titanium. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold provides thermal and wear resistance for the coated carbide grade, improving edge stability and enabling more consistent tool life under varied cutting conditions with this Walter Tools milling insert. How does the 0° (negative) rake affect cutting performance? A 0° (negative) rake increases mechanical strength at the cutting edge, reducing chipping risk during interrupted cuts and supporting secure, vibration‑resistant milling operations with the XNHX130640R-L65T. What role does the L65T chipbreaker play in practical use? The L65T chipbreaker optimises chip formation and evacuation, which helps maintain surface quality and avoids built‑up edge, particularly when machining rostfreier Stahl and tougher alloys with this insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the trademark holders. The item offered is original, new goods from the stated manufacturer.
XNHX130640R-L65W WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, secure chip control and a compact corner radius to maintain consistent productivity when machining demanding alloys; order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. XNHX130640R-L65W WSM45X milling insert — WSM45X grade with L65W chipbreaker by Walter Tools XNHX130640R-L65X WSM45X is a negative-geometry milling insert designed for heavy-duty machining of stainless steels and heat-resistant superalloys, offering robust edge stability and controlled chip formation Optimised for stainless steel and superalloys Coated carbide grade WSM45X L65W chipbreaker for secure chip control 0° negative clearance for robust cutting Consistent performance where heat and toughness matter The XNHX130640R-L65W WSM45X insert combines a coated carbide grade with a geometry engineered for demanding environments. The WSM45X grade provides thermal resilience and edge stability, which reduces flank wear when machining stainless steel and heat-resistant superalloys. With a compact corner radius 4, the insert delivers predictable engagement forces and helps preserve dimensional accuracy across long production runs. This results in fewer interruptions for tool changes and a steadier process flow. Stable chip control for uninterrupted machining Built around the chipbreaker L65W, the insert promotes short, manageable chips even under high temperatures and heavy feeds. The controlled chip formation lowers the risk of built-up edge and improves surface consistency on forged or work-hardened components. Combined with the 0° clearance negative geometry, the design favours robust cutting and reduces vibration in interrupted or peripheral milling operations, so cycle times remain stable and component rejects decrease. Practical benefits for workshop integration The insert’s form factor and tolerance class H make it straightforward to seat in standard milling toolholders that accept this format. The coated grade supports a wide material range classified under ISO 513 as M and S, meaning reliable behaviour in stainless steel and titanium or nickel-based alloys. For production managers, the clear link between material class and insert performance simplifies grade selection and tool inventory, reducing setup time and the need for frequent trials. Durable edge life with industrial-grade metallurgy Thanks to the WSM45X coated cemented-carbide composition, the insert offers a balance between wear resistance and fracture toughness, addressing both abrasive and adhesive wear mechanisms. The negative geometry and L65W chip control combine to protect the cutting edge during heavy interrupted cuts, promoting longer service life and repeatable results. Where stable surface finish and repeatability are required, this specification supports robust throughput without sacrificing quality. For application support or to secure suitable quantities of this Walter Tools insert, contact Metav Werkzeuge for tailored recommendations and supply options via eMail or phone. Technical data Article number / SKU: XNHX130640R-L65W-WSM45X-WALTER Product designation: XNHX130640R-L65W WSM45X Brand: Walter Tools Product type: Milling insert Facts Corner radius: 4 Clearance angle: 0° (negative) Plate size: 13 Thickness: 06 Tolerance class: H Material group: S / M Chipbreaker: L65W Special features Coating / substrate: coated cemented carbide Grade: WSM45X Series: Walter Schneidstoffsorte - Serie offen Application: suitable for stainless steel and heat-resistant superalloys and titanium Geometry: negative insert for robust applications FAQ Which materials are best suited to this insert? The XNHX130640R-L65W WSM45X insert from Walter Tools is optimised for stainless steel and heat-resistant superalloys (ISO groups M and S), offering secure chip formation and edge stability in these demanding materials. What does the WSM45X grade indicate? WSM45X denotes a Walter Tools coated carbide grade selected for thermal stability and wear resistance; the grade is suited to tough, heat-prone materials where both coating and substrate contribute to tool life. How does the L65W chipbreaker help production? The L65W chipbreaker creates short, controllable chips that reduce entanglement and improve surface consistency, supporting uninterrupted machining and safer chip evacuation during heavy cuts. What does 0° negative clearance mean in practice? A 0° negative clearance geometry increases edge support and resistance to chipping under heavy loads; it favours robust cutting conditions and is particularly effective in interrupted milling. Is this insert compatible with common milling holders? The insert conforms to the listed ISO designation and tolerance class H, making it compatible with toolholders designed for this format; verify holder compatibility with the SKU XNHX130640R-L65W-WSM45X-WALTER. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, brand-new merchandise from the manufacturer.
XNMF070508-D27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of long tool life, stable chip formation and process-safe cutting when machining cast iron by pairing high-performance Tiger·tec Gold coating with a robust 0° negative rake geometry; order directly via Metav Werkzeuge or consult the team for application support. XNMF070508-D27 / XNMF070508-D27 WKK25G — Fräswendeschneidplatte for cast iron (Walter Tools) The XNMF070508-D27 WKK25G is a coated carbide milling indexable insert optimised for productive machining of cast iron components in industrial milling applications. Tiger·tec Gold coated carbide for abrasion resistance Designed specifically for cast iron (ISO group K) 0° negative rake for robust cutting 0.8 mm corner radius for edge strength High-performance coating for abrasion-prone cast-iron work The combination of the Tiger·tec Gold technology and a coated carbide substrate supplies wear resistance where abrasive cast-iron materials demand it. This surface engineering reduces flank wear and extends usable life, resulting in fewer tool changes and higher uptime. For production environments dependent on predictable cycle times, the coated grade WKK25G balances wear resistance with toughness to cope with short, brittle chips typical of grey and nodular cast iron, thereby improving overall process stability. Robust geometry that increases cutting reliability A 0° negative rake and an 0.8 mm corner radius create a mechanically strong cutting edge that withstands high cutting forces and occasional interruptions. The negative relief angle supports improved edge security during heavy milling passes, while the medium corner radius secures repeatable surface finish and dimensional consistency. Together with the M tolerance class, these attributes help maintain predictable insert seating and runout behaviour in the toolholder, reducing the need for frequent rework and inspection. Application-oriented chip control and handling The D27 chipbreaker is tuned to the fracture-prone chips of cast-iron machining, promoting short, controlled chip formation and safe evacuation from the cutting zone. Assigned to ISO group K, the insert suits roughing and finishing operations where chip control and tool life are priorities. As an indexable milling insert, it simplifies inventory management and changeover: worn edges are rotated or replaced without regrinding, supporting lean production workflows and quicker spindle uptime. For tailored advice on integrating the Walter Tools Tiger·tec Gold insert into production — including holder compatibility and recommended cutting parameters — contact Metav Werkzeuge for consultancy and swift delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: XNMF070508-D27-WKK25G-WALTER Article designation: XNMF070508-D27 WKK25G Product type: Milling indexable insert Series: Tiger·tec Gold Grade: WKK25G Facts Relief angle: 0° (negative) Corner radius: 0.8 Plate size: 07 Plate thickness: 05 Chipbreaker: D27 Execution: F Tolerance class: M Material group: K Special features Coating: Tiger·tec Gold (coated carbide) Optimised for: Cast iron (ISO 513 group K) Application: productive milling of abrasive cast-iron materials Stable chip formation and edge protection Designed for industrial milling toolholders FAQ Which materials is this insert suitable for? The XNMF070508-D27 WKK25G is designed primarily for cast iron (ISO group K); the WKK25G grade and Tiger·tec Gold coating target abrasive cast-iron machining. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold surface increases abrasion resistance and stabilises wear progression on the Walter Tools milling insert, extending tool life in demanding cast-iron applications. How does the 0° negative rake affect cutting? A 0° negative rake on this milling insert produces a stronger cutting edge and higher resistance to mechanical stresses, which improves reliability during heavy or interrupted cuts. What is the role of the D27 chipbreaker? The D27 chipbreaker on the insert promotes short, controlled chips when machining brittle cast iron, improving evacuation and reducing the risk of chip entanglement. Is the XNMF070508-D27 WKK25G suitable for finishing passes? Yes; the combination of the WKK25G grade and a 0.8 mm corner radius supports consistent edge strength and surface quality for both roughing and finishing operations on cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
XNMF070508-F57 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the wear-resistant WKK25G grade for consistent, productive cast iron machining; the insert’s chipbreaker F57 and 0° (negative) free angle ensure controlled chips and robust cutting edges. Order the XNMF070508-F57 WKK25G milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. XNMF070508-F57 WKK25G — Milling indexable insert for cast iron, Tiger‑tec Gold, Walter Tools The XNMF070508-F57 WKK25G is an indexable milling insert designed for efficient machining of cast iron components, combining a Tiger‑tec Gold coated substrate with a chipbreaker for reliable chip control. Tiger‑tec Gold coated carbide Optimised for cast iron (ISO K) Chipbreaker F57 for controlled chips 0° (negative) free angle for interrupted cuts Consistent edge life and wear resistance for abrasive cast iron The combination of the Tiger‑tec Gold coating and the WKK25G carbide grade provides a balanced resistance to abrasive wear while maintaining edge stability under cyclic loading. This coating system is engineered to reduce flank wear and maintain cutting geometry for longer tool life, which translates into fewer index changes and less unplanned downtime. The insert’s material pairing is particularly suitable for components where short, brittle chips and abrasive graphite in cast iron demand a coating that prevents premature crater and flank wear. Reliable chip formation and secure cutting for higher productivity Built with a chipbreaker F57 and a 0° (negative) free angle, the geometry of this insert delivers predictable chip segmentation and reinforced cutting edges, especially under interrupted cuts. The insert’s corner radius 0.8 mm increases edge robustness, allowing higher feed rates in roughing passes without sacrificing stability. For workshop planning, this means improved material removal rates and a steadier production flow when machining grey or nodular cast iron in series operations. Practical handling and process-adapted performance on the shop floor As an indexable insert, the XNMF070508-F57 WKK25G simplifies tool inventory and changeover: single-sided indexing reduces preparation time and supports repeatable positioning with tolerance class M. The format code (plate size 07, plate thickness 05) reflects a compact geometry compatible with a wide range of milling cutter bodies designed for cast iron milling. Given its focused ISO K application, this insert is a pragmatic choice when process reliability and predictable replacement intervals are priorities in production environments. For availability, tooling advice or to discuss the best insert configuration for a specific cast iron application, contact Metav Werkzeuge for expert support and fast supply. Technical Data SKU: XNMF070508-F57-WKK25G-WALTER Product designation: XNMF070508-F57 WKK25G Grade: WKK25G Series: Tiger‑tec Gold Chipbreaker: F57 Free angle: 0° (negative) Corner radius: 0,8 Plate size: 07 Plate thickness: 05 Version: F Tolerance class: M Material group: K (cast iron) Manufacturer: Walter Tools Data Corner radius: 0.8 mm Free angle: 0° (negative) Plate size code: 07 Plate thickness code: 05 Tolerance class: M Special features Coated carbide insert (Tiger‑tec Gold) Application group: ISO K (cast iron) Designed for abrasive wear and short breaking chips Suitable for interrupted cuts and roughing operations Manufacturer brand: Walter Tools FAQ What materials is this insert intended for? The XNMF070508-F57 WKK25G insert is optimised for machining cast iron (ISO group K) and is formulated to manage the abrasive and short, brittle chips typical of those materials. How does the chipbreaker F57 affect machining? The chipbreaker F57 promotes controlled chip formation, reducing the risk of long stringy chips and improving evacuation during both roughing and semi-finish passes with cast iron. Is the negative free angle suitable for interrupted cuts? Yes. The 0° (negative) free angle increases edge strength and resistance to chipping, which benefits interrupted cutting conditions commonly encountered in milling cast iron components. What does the WKK25G grade mean in practical terms? WKK25G is a Walter Tools coated carbide grade from the Tiger‑tec Gold family, chosen for its wear resistance and stable cutting behaviour in abrasive cast iron applications. Can this insert be used for finishing passes? While optimised for robust removal and roughing in cast iron, the insert can be used for semi‑finishing where the corner radius and cutting geometry meet the surface finish and tolerance requirements of the component. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, brand-new product from the manufacturer Walter Tools.
XNMF090612-D27 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and a WKK25G grade tuned for abrasive cast iron to keep machining stable and productive; order the XNMF090612‑D27 WKK25G milling insert directly via Metav Werkzeuge or ask the consultants for application advice. XNMF090612‑D27 WKK25G milling insert for cast iron – Walter Tools The XNMF090612‑D27 WKK25G is a negative‑relief milling insert designed for efficient machining of cast iron, offering robust edge support and optimised chip formation for demanding production environments. Tiger‑tec Gold coating for high wear resistance Optimised for abrasive cast iron machining 0° negative relief for robust edge support Stable chip control with D27 chipbreaker Consistent results when machining cast iron The combination of the WKK25G grade and the Tiger‑tec Gold coating delivers a measurable improvement in tool life when facing abrasive grey and nodular cast irons. The grade is formulated to resist abrasive wear and manage short, breaking chips typical of cast materials; this yields longer intervals between indexings and fewer unscheduled tool changes. As a result, cycle times remain predictable and throughput is maintained even in continuous production runs. Improved process reliability through controlled chip formation A dedicated chipbreaker D27 and the insert’s negative 0° relief are designed to secure the cutting edge under heavy engagement, reducing vibrations and preventing edge chipping. Controlled chip formation lowers the risk of re-cutting and improves surface finish, which benefits downstream processes and reduces rework. The insert’s stable cutting behaviour supports higher feed rates where the workpiece and machine permit, translating into better productivity per tool. Practical technical attributes for straightforward integration The insert is supplied in the ISO designation XNMF090612‑D27 WKK25G and matches common toolholders used in industrial milling. Key attributes such as the 1.2 mm corner radius and standard plate size enable predictable engagement and repeatable positioning in fixtures. The negative geometry offers enhanced security of the cutting edge under interrupted cuts and tough part geometries, so set‑up routines and process documentation can be standardised across similar operations. Application advantages for production environments Designed primarily for the ISO group K (cast iron), the insert supports a wide range of cast materials and typical machining tasks including roughing and semi‑finishing where chip control and edge strength are decisive. The coated cemented carbide substrate extends wear resistance, while the insert form and tolerance class allow reliable interchangeability during production. For manufacturers seeking a balance of life and performance in cast iron milling, this insert provides a quantifiable improvement in process stability. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Gold inserts and guidance on optimising cutting data for specific cast iron grades; Metav Werkzeuge consultants are available to assist with selection and logistics. Technical Data Article number: XNMF090612‑D27‑WKK25G‑WALTER Designation: XNMF090612‑D27 WKK25G Manufacturer: Walter Tools Series: Tiger‑tec Gold Measurements Corner radius: 1.2 mm Relief angle: 0° (negative) Plate size: 09 Plate thickness: 06 Materials & features Coating: Tiger‑tec Gold Grade: WKK25G Chipbreaker: D27 Execution: F Tolerance class: M Suitable for: cast iron (ISO group K) FAQ What materials is this insert intended for? The insert is specified for cast iron applications; the WKK25G grade and Tiger‑tec Gold coating are optimised for abrasive cast materials (ISO group K). Can the insert handle interrupted cuts and heavy engagement? Yes, the negative 0° relief geometry and robust edge support make the insert suitable for interrupted cuts and heavier engagement typical in roughing operations. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating increases wear resistance and heat management, extending tool life and improving process stability when machining abrasive cast irons. Which chipbreaker does the insert use and what is its benefit? The insert features the D27 chipbreaker, which promotes short, controlled chips for safer evacuation and more consistent surface quality on cast iron workpieces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new manufacturer goods.
XNMF090612-D27 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP25S grade for durable, high‑performance milling of steel and cast iron; the negative 0° rake and 1.2 mm corner radius provide robust edge strength and stable chip control, making this insert a pragmatic choice for consistent production. Order directly through Metav Werkzeuge or consult their application specialists for process‑specific recommendations. XNMF090612-D27 WKP25S milling insert — Tiger·tec Silver grade for steel and cast iron, Walter Tools The XNMF090612-D27 WKP25S is a negative‑rake, indexable milling insert from Walter Tools designed for productive machining of steel and cast iron in industrial milling operations. Tiger·tec Silver coating for stable cutting WKP25S grade for steel and cast iron Negative 0° rake for robust engagement 1.2 mm corner radius for reliable edge strength Consistent productivity for steel and cast iron machining The Tiger·tec Silver series, represented here by the WKP25S grade, is engineered to deliver consistent productivity across a wide range of steels and cast irons. The coated carbide substrate stabilises the cutting edge under the thermal and mechanical loads typical of P and K workpiece groups, reducing unplanned downtime and enabling predictable batch throughput. As a consequence, production planning can rely on fewer insert changes and steadier cycle times, which supports leaner workflows and improved machine utilisation. Geometry and chip control that reduce process risk The insert’s negative 0° rake geometry combined with the D27 chipbreaker promotes secure cutting engagement and controlled chip formation when machining tougher steels and abrasive cast irons. The 1.2 mm corner radius increases edge resilience against impact and interruptions, helping to avoid premature edge failure. These geometry choices translate into a dependable cutting process where surface quality and dimensional stability are maintained with less need for corrective rework. Durable coating and grade for longer tool life The Tiger·tec Silver coating provides thermal and tribological benefits that slow wear mechanisms and support higher cutting parameters where applicable. The WKP25S grade is optimised for the heat and chip characteristics of steel and cast iron, offering a balance between edge toughness and wear resistance. The result is extended tool life and more consistent component finish, which together lower the overall cost per part and contribute to sustainable machining practices. Contact Metav Werkzeuge for application advice, availability and to secure Walter Tools Tiger·tec Silver WKP25S inserts for reliable production — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: XNMF090612-D27-WKP25S-WALTER Label: Fräswendeschneidplatte XNMF090612-D27 WKP25S Walter Tools SKU: XNMF090612-D27-WKP25S-WALTER Product type: Fräswendeschneidplatte (milling insert) Series: Tiger·tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Rake angle: 0° (negative) Corner radius: 1.2 mm Insert size: 09 Thickness code: 06 Chipbreaker: D27 Tolerance class: M Execution: F Special features Coating: Tiger·tec Silver Substrate / grade: WKP25S (coated carbide) Material suitability: Steel (P), Cast iron (K) Stable chip control for discontinuous chips Designed for industrial milling applications FAQ What materials is this insert suitable for? The XNMF090612-D27 WKP25S insert from Walter Tools is specified for steel (P) and cast iron (K) applications according to the Tiger·tec Silver grade characteristics. How does the insert geometry affect machining stability? The negative 0° rake and 1.2 mm corner radius combine to provide robust engagement and increased edge strength, supporting stable chip formation and reduced risk of edge chipping during interrupted or heavy milling. Is the D27 chipbreaker suitable for high‑feed operations? The D27 chipbreaker on this Tiger·tec Silver insert is configured to control chip flow effectively in a range of cutting conditions typical for steel and cast iron machining, improving process reliability over many cutting cycles. Can this insert be used for finishing passes? While optimised for productive roughing and general milling of P and K materials, the WKP25S grade and coating can also achieve consistent surface quality in semi‑finishing operations depending on the chosen cutting parameters and machine set‑up. What benefits does the Tiger·tec Silver coating deliver? The Tiger·tec Silver coating enhances thermal resistance and reduces friction at the cutting edge, which contributes to longer tool life and steadier performance of the WKP25S inserts under industrial cutting loads. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer.
XNMF090612-D27 WKP35G Wendeplatten - Walter Tools
Take advantage of the coated Tiger·tec Gold grade and the D27 chipbreaker for reliable, high‑productivity milling of steel and cast iron; combine wear resistance and consistent chip control for smoother cycles. Order the XNMF090612‑D27 WKP35G Fräswendeschneidplatte directly via Metav Werkzeuge or ask our consultants if needed. XNMF090612-D27 WKP35G — Fräswendeschneidplatte (0° rake, 1.2 mm radius) by Walter Tools XNMF090612-D27 WKP35G is a coated carbide milling insert engineered for productive machining of steel and cast iron using Tiger·tec Gold technology Tiger·tec Gold coated grade WKP35G Optimised D27 chipbreaker for stable chips Suited for steel (P) and cast iron (K) 0° negative rake with 1.2 mm corner radius High productivity through advanced coating and grade The Tiger·tec Gold coating combined with the WKP35G coated carbide grade delivers enhanced wear resistance and thermal stability, which translates into longer tool life and fewer tool changes. This insert's coating is formulated to withstand the temperatures and abrasive conditions typical when machining steel and cast iron; as a result, process reliability improves and throughput increases. The technical design focuses on controlled flank wear rather than unpredictable failure, enabling consistent component quality across production runs. Predictable chip control for stable machining cycles Equipped with the D27 chipbreaker and a 0° negative rake, the insert promotes stable chip formation and reliable evacuation, reducing the risk of re-cutting or tool jamming. The moderate 1.2 mm corner radius contributes to improved edge strength and resistance to chipping during interrupted cuts or entry/exit phases. For machining operations where surface integrity and repeatability matter, this geometry supports steady cutting forces and helps maintain constant cycle times. Industrial compatibility and production-ready tolerances Designed to ISO‑conformant material groups, the insert is specified for P (steel) and K (cast iron) applications according to ISO 513, making it a versatile choice across mixed‑material production environments. The component is manufactured to tolerance class M and a plate size of 09 with a thickness of 06, ensuring interchangeability and predictable clamping behaviour. The designation and execution reflect a focus on repeatable performance: the geometry and coated carbide composition aim to reduce setup iterations and simplify tool inventory management for jobbing and serial production alike. For robust, high‑productivity milling with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for application advice and stock availability. Technical Data Article number: XNMF090612-D27-WKP35G-WALTER Designation: XNMF090612-D27 WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Corner radius: 1.2 mm Free rake: 0° Plate size: 09 Plate thickness: 06 Tolerance class: M Special features Grade: WKP35G Series/coating: Tiger·tec Gold Chipbreaker: D27 Material applicability: P / K (Steel / Cast iron) Execution: F ISO designation: XNMF090612-D27 WKP35G FAQ What materials is this insert suitable for? The XNMF090612‑D27 WKP35G Fräswendeschneidplatte from Walter Tools is intended for P (steel) and K (cast iron) applications as specified by ISO 513. How does the D27 chipbreaker affect machining? The D27 chipbreaker on this insert improves chip control and evacuation, promoting steady cutting forces and reducing disturbances during continuous or interrupted milling. What does a 0° negative rake mean for performance? A 0° negative rake increases edge strength and stability, which is beneficial when machining tougher materials or when encountering interrupted cuts; it complements the coated grade for extended durability. Is the WKP35G grade suitable for serial production? Yes. The WKP35G coated carbide grade, part of the Tiger·tec Gold family, is engineered for stable wear behaviour and consistent component quality in production environments. Can the insert be used interchangeably in standard toolholders? The insert follows common ISO designation and tolerance class M, supporting compatibility with matching toolholders designed for the XNMF090612 family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
XNMF090612-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating, the WKK25G cast‑iron grade and the 0° negative geometry for secure chip control and extended tool life; order directly via Metav Werkzeuge or contact our consultants for tailored recommendations. XNMF090612-D57 WKK25G milling insert for cast iron by Walter Tools — Tiger‑tec Gold, D57 chipbreaker A XNMF090612-D57 WKK25G milling insert engineered for high‑performance machining of cast iron, featuring Tiger‑tec Gold coated carbide and a D57 chipbreaker for stable, reproducible results. Tiger‑tec Gold coating for long tool life Optimised for cast iron (ISO group K) 0° negative rake for robust cutting 1.2 mm corner radius for stable edges Stable chip control for abrasive cast‑iron machining The Tiger‑tec Gold grade WKK25G is formulated to address the abrasive wear and typically short, brittle chips encountered when machining cast iron. The combination of a purpose‑designed chipbreaker D57 and the coated carbide substrate ensures chips are fractured and evacuated reliably, reducing the risk of built‑up edge and uncontrolled tool loading. From a production perspective, this results in fewer interruptions, more consistent surface quality and a measurable improvement in process reliability—key parameters for efficient series production. Coating and grade deliver longer service intervals The Tiger‑tec Gold coating applied to this grade enhances resistance to abrasive wear and thermal loading compared with uncoated grades. The coating, together with the WKK25G substrate, provides a balance between hardness and toughness tailored for grey and nodular cast irons (ISO group K). For shops seeking predictable tool life and fewer insert changes, this coated carbide solution reduces downtime and contributes to lower overall machining costs while maintaining dimensional accuracy. Geometry and dimensions that improve edge stability The insert’s 0° negative rake geometry and 1.2 mm corner radius offer a robust cutting edge that tolerates intermittent cuts and variable chip thickness typical of cast‑iron components. The nominal plate size 09 and plate thickness 06 align with common milling cutter bodies, enabling straightforward integration into existing holder systems. The negative rake increases edge strength, making the insert suitable for heavier engagements where edge stability and repeatability are priorities. Practical usage and process considerations When integrating this insert into a machining process, selection of appropriate cutting speeds and feed per tooth for cast iron is essential to exploit the WKK25G advantages fully. The coated grade performs well under conventional coolant regimes and dry machining in many cases; however, application‑specific trials are recommended to optimise parameters. The insert’s tolerance class M and execution F indicate manufacturing precision and a defined finish state, supporting consistent assembly into toolholders and predictable runout behaviour at standard spindle speeds. Contact Metav Werkzeuge today to request a cutting concept or application notes for Walter Tools Tiger‑tec Gold inserts and secure the right configuration for cast‑iron production. Technical data Article number (SKU): XNMF090612-D57-WKK25G-WALTER Product designation: XNMF090612-D57 WKK25G Brand: Walter Tools Facts Corner radius: 1.2 mm Plate size: 09 Plate thickness: 06 Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKK25G (coated carbide) Chipbreaker: D57 Material application: Cast iron (ISO group K) Execution: F FAQ What materials is this insert designed for? The XNMF090612-D57 WKK25G insert is optimised for cast iron (ISO group K) and is formulated to manage abrasive wear and short, breaking chips typical for these materials. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the WKK25G grade improves abrasion resistance and thermal stability, leading to longer tool life and reduced frequency of insert changes during cast‑iron machining. What does the 0° negative rake mean for cutting performance? A 0° negative rake increases edge strength and robustness, making the insert suitable for interrupted cuts and heavier engagements where a stable cutting edge is required. Is the chipbreaker D57 suitable for finishing or roughing operations? The D57 chipbreaker is designed to ensure reproducible chip formation for cast iron; depending on the cutter body and parameters it can be used in both productive roughing and semi‑finishing applications. Can this insert be integrated into existing milling systems? Yes, the plate size 09 and plate thickness 06 match common toolholder configurations, and the tolerance class M supports consistent assembly and repeatable results. Walter Tools — The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision cutting tools; the supplied article is original and factory‑new. Protected trademarks and trade names remain the property of their respective owners. This reference to brand names is for explanation only and does not indicate any affiliation. Hersteller: Walter Tools
XNMF090612-F57 WKK25G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold grade combined with consistent chip control and a robust 0° negative rake deliver reliable productivity in cast‑iron applications; order the XNMF090612‑F57 WKK25G via Metav Werkzeuge or consult the technical team for process matching. XNMF090612‑F57 WKK25G milling indexable insert — Tiger·tec Gold for cast iron, Walter Tools The XNMF090612‑F57 WKK25G is a coated carbide milling insert optimised for machining cast iron with controlled chip formation and high wear resistance. Tiger·tec Gold coated carbide Optimised for cast‑iron machining Chipbreaker F57 for reliable chip control 0° negative rake with 1.2 mm corner radius Durable performance for abrasive cast‑iron work The Tiger·tec Gold grade WKK25G combines a coated carbide substrate with a wear‑resistant coating engineered for the abrasive nature of cast iron. This results in extended tool life, reduced downtime and a lower cost per part when compared to uncoated grades. The insert’s design focuses on stable cutting under intermittent loads typical of cast‑iron components, so production cycles maintain consistent output and predictable re‑grinding intervals. Geometry that improves stability and surface quality A 0° negative rake and a 1.2 mm corner radius create a robust cutting edge that resists chipping and deflection. Negative rake geometry increases edge strength for interrupted or heavy cuts, while the larger corner radius contributes to improved workpiece finish and dimensional stability. The tolerance class M ensures repeatable seating in the toolholder, supporting consistent part quality across multiple insert changes. Optimised chip control for secure machining The chipbreaker F57 is tailored to the short, brittle chips produced when machining cast iron, promoting dependable chip breaking and evacuation. Effective chip control reduces the risk of recutting, minimises tool‑holder contamination and shortens cycle times through fewer manual interventions. Combined with the fast replacement capability of indexable inserts, this optimises overall machining efficiency and supports uninterrupted process flow. Compatibility, handling and recommended use The insert fits toolholders designed for the XNMF090612‑F57 format and is intended primarily for ISO group K (cast iron) applications. Its coated carbide construction makes it suitable for abrasive grey and nodular cast irons where stable chip formation is required. For new operations, trial runs with adjusted feeds and depths are advised to exploit the grade’s wear resistance while monitoring surface finish and tool life for final parameter optimisation. For stock enquiries, toolholder compatibility or application advice on the Walter Tools Tiger·tec Gold XNMF090612‑F57 WKK25G milling insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: XNMF090612-F57-WKK25G-WALTER Designation: XNMF090612‑F57 WKK25G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKK25G Facts Plate size: 09 Thickness: 06 Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Coated carbide (Tiger·tec Gold) Optimised for cast iron (ISO K) Chipbreaker type: F57 Robust negative rake geometry Designed for reliable chip control and long tool life FAQ Which materials is this insert suitable for? The XNMF090612‑F57 WKK25G milling insert is optimised for ISO group K, i.e. cast iron, with the grade tailored to resist abrasive wear and handle short, breaking chips. What are the key benefits of the WKK25G grade? WKK25G is a Tiger·tec Gold coated carbide grade developed by Walter Tools to deliver high wear resistance, stable edge life and productive machining in cast‑iron applications. What is the purpose of the F57 chipbreaker? The chipbreaker F57 produces short, controllable chips in cast iron, improving evacuation and reducing recutting, which in turn supports uninterrupted machining and safer handling. How does the 0° negative rake affect cutting? A 0° negative rake increases cutting‑edge strength for interrupted or heavy cuts; when combined with the 1.2 mm corner radius, it provides enhanced stability and a consistent surface finish. What is the exact article identification and who supplies it? The article is listed as XNMF090612‑F57 WKK25G (SKU: XNMF090612‑F57‑WKK25G‑WALTER) and is supplied by Walter Tools as a milling indexable insert for cast‑iron machining. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNMF090612-F57 WKP25S Wendeplatten - Walter Tools
Benefit from reliable, high‑productivity milling thanks to the Tiger‑tec Silver grade and the WKP25S wear class; the insert’s 0° negative rake and chipbreaker F57 ensure stable chip formation and extended tool life. Order directly via Metav Werkzeuge or consult the technical team for geometry matching and delivery options. XNMF090612-F57 WKP25S — Milling insert XNMF090612-F57 WKP25S, Tiger‑tec Silver, for steel & cast iron — Walter Tools The XNMF090612-F57 WKP25S is a coated carbide milling insert designed for productive machining of steel and cast iron, combining robust chip control with a geometry optimised for reliable material removal. Tiger‑tec Silver coated grade WKP25S Optimised chip control with F57 breaker Negative 0° rake for reliable roughing Suitable for steel and cast iron machining Boosted productivity through hardened coating technology The combination of Tiger‑tec Silver coating and WKP25S grade yields a balance of wear resistance and toughness that supports longer cutting intervals and consistent surface finish. This coated carbide composition reduces flank wear under typical milling temperatures, making it well suited to continuous production environments where sustained cutting performance and component repeatability matter. The result is fewer tool changes and improved uptime on the shop floor. Application-focused compatibility for common engineering materials Engineered for the ISO P and K groups, this insert excels when machining steel and cast iron. The substrate and coating chemistry are tuned for the thermal and abrasive conditions typical of these materials, enabling controllable chip formation and predictable edge behaviour. For workshops producing structural components or cast parts, the geometry and grade provide a dependable solution for both roughing and mixed finishing operations. Geometry designed for robustness and chip control A 0° negative rake provides enhanced edge strength for interrupted cuts and heavy engagement, while the 1.2 mm corner radius contributes to improved insert life and more even wear distribution along the cutting edge. The integrated chipbreaker F57 promotes short, manageable chips that lower the risk of entanglement and improve machine and toolholder safety. Combined, these geometric features reduce the likelihood of edge chipping and support stable cutting forces during demanding operations. Precision and interchangeability for process stability Manufactured to tolerance class M with size 09 and thickness 06, the insert fits standard indexable milling cutter systems and enables repeatable positioning after index changes. The consistent manufacturing tolerance supports predictable machining results and easier toolpath optimisation. Together with the grade’s properties, this leads to stable chip formation and reliable surface quality across production batches, contributing to lower scrap rates and improved first‑pass yield. Speak to Metav Werkzeuge about specifying the Walter Tools Tiger‑tec Silver WKP25S insert for the intended machining task — our specialists provide application advice and can recommend the optimal geometry for production requirements. Technical data Article number: XNMF090612-F57-WKP25S-WALTER Name: Fräswendeschneidplatte XNMF090612-F57 WKP25S Manufacturer: Walter Tools Product type: Milling insert Facts Corner radius: 1.2 mm Relief angle: 0° (negative) Plate size: 09 Plate thickness: 06 Tolerance class: M Chipbreaker: F57 Special features Coating: Tiger‑tec Silver Grade: WKP25S (coated carbide) Material compatibility: Steel (P) and Cast iron (K) Execution: F FAQ What machining tasks is this insert best suited for? The XNMF090612-F57 WKP25S milling insert by Walter Tools is intended for productive milling of steel and cast iron, offering a balance of toughness and wear resistance for roughing and mixed finishing applications. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP25S grade enhances wear resistance and thermal stability, which in turn extends tool life for the Walter Tools milling insert XNMF090612-F57 WKP25S and helps maintain consistent surface quality. Is the chipbreaker F57 suitable for interrupted cuts? Yes, the chipbreaker F57 combined with the 0° negative rake of the XNMF090612-F57 WKP25S supports short, controllable chips and the negative rake adds edge strength for interrupted or heavy cutting conditions. Can this insert be used in standard indexable milling holders? The insert’s size 09 and tolerance class M ensure compatibility with common indexable milling systems; the XNMF090612-F57 WKP25S meets dimensional standards for reliable interchangeability. What materials can be machined with this grade? The WKP25S grade is formulated for ISO groups P and K, meaning the XNMF090612-F57 WKP25S is suitable for a wide range of steel and cast iron machining tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. They are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
XNMU070508-F57 WKP25S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating, the WKP25S cutting grade and the robust F57 chipbreaker, the insert offers steady edge life and reliable chip control in steel and cast-iron milling; order directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. XNMU070508-F57 WKP25S milling insert — Tiger·tec Silver coated, for steel & cast iron | Walter Tools The XNMU070508-F57 WKP25S is a milling indexable insert engineered for productive machining of steel (P) and cast iron (K), featuring a dedicated F57 chipbreaker and a 0° negative free angle. Tiger·tec Silver coating for extended tool life WKP25S grade optimised for steel and cast iron 0.8 mm corner radius for increased edge strength F57 chipbreaker for controlled chip formation Consistent machining performance through coated-carbide technology The Tiger·tec Silver coating combined with the WKP25S grade provides a balance of wear resistance and toughness that is particularly effective in the thermal and mechanical conditions encountered when machining steel and cast iron. The coated-carbide construction ensures steady edge life under cyclic loads and abrasive contact, while the F57 chipbreaker supports predictable chip breakage and evacuation. These technical characteristics translate into fewer tool changes and more stable cycle times on production lines, which benefits both single-piece flow and batch operations. Stable geometry for secure milling and reproducible results A negative free angle of 0° and a corner radius of 0.8 mm make this insert well suited to operations where cutting-edge stability and strength are priorities. The geometry reduces the risk of edge chipping during interrupted cuts and supports consistent surface integrity on roughing passes. With tolerance class M and the ISO designation present in the marking, users gain reliable interchangeability and repeatability when matching inserts to toolholders and cutter bodies specified for this ISO style. Practical application guidance and selection criteria Compatibility with ISO material groups P (steel) and K (cast iron) defines the typical application window for this grade and chipbreaker combination. In practice, the insert excels in medium- to heavy-duty milling tasks where controlled chip flow and resistance to abrasive wear are required. Selection should focus on matching the insert size and thickness codes to the cutter body, and on choosing machining parameters that exploit the coating’s strengths—moderate to high cutting speeds with appropriate feeds for chip control. For specialised conditions or mixed-material batches, consult the toolmaker’s recommendations to align cutter geometry, coolant strategy and parameter windows with the insert’s capabilities. For application-specific advice on Walter Tools Tiger·tec Silver inserts such as the XNMU070508-F57 WKP25S, contact Metav Werkzeuge's cutting-tool specialists at info@metav-werkzeuge.com or +49 2822 7131930 for detailed recommendations and availability Technical data SKU: XNMU070508-F57-WKP25S-WALTER Name: Fräswendeschneidplatte XNMU070508-F57 WKP25S Walter Tools Series: Tiger·tec Silver Grade: WKP25S Manufacturer: Walter Tools Core technical data Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 07 Plate thickness: 05 Tolerance class: M Special features Chipbreaker: F57 Coating technology: Tiger·tec Silver Material compatibility: steel (P); cast iron (K) Execution: U ISO designation: XNMU070508-F57 WKP25S Material indication: P / K FAQ Which materials can be machined with this insert? The XNMU070508-F57 WKP25S milling insert by Walter Tools is specified for ISO groups P (steel) and K (cast iron), making it suitable for both unalloyed/low-alloy steels and a range of cast-iron types. What advantage does the WKP25S grade provide? WKP25S is a Walter coated-carbide grade in the Tiger·tec Silver family; it offers a compromise between wear resistance and toughness that favours longer tool life and reliable performance in typical steel and cast-iron milling tasks. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving process stability during medium to heavy milling operations. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and helps absorb cutting forces during interrupted cuts, supporting robust roughing performance and improved resistance to edge chipping. How should the geometry code be interpreted when selecting holders? The ISO-style designation XNMU070508-F57 WKP25S identifies the insert’s shape, size family and chipbreaker; match this marking with toolholder specifications to ensure correct seating, clamping and cutting clearance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names belong to their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation; the offered item is an original, factory-new product of the manufacturer.
XNMU070508-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Gold coating and the WKP35G grade for consistent tool life and reliable chip control; the insert supports efficient production when machining steel and cast iron. Order the part directly via Metav Werkzeuge or contact the consultants for application advice. XNMU070508-F57 WKP35G milling indexable insert (for steel and cast iron) – Tiger‑tec Gold, Walter Tools A robust XNMU070508-F57 WKP35G milling insert designed for stable, high‑productivity milling of steel and cast iron in industrial production environments Tiger‑tec Gold coating for long tool life Optimised chip control with F57 chipbreaker Negative 0° relief for stable milling Suited to steel and cast iron machining Consistent performance and extended tool life for productive milling The insert is engineered to deliver consistent metal removal rates and a long service interval through the combination of the Tiger‑tec Gold coating and the WKP35G grade. This coated carbide grade is optimised for the thermal and abrasive conditions typical of machining steel and cast iron, which improves resistance to flank and crater wear and thus extends usable tool life. The integrated chipbreaker F57 helps to control swarf formation and supports reliable evacuation of chips, which reduces the risk of rework and interruptions in the production flow. These technical choices prioritise repeatable performance and lower cost per part in medium‑ to high‑volume milling operations. Precision and process stability for repeatable results Designed with a negative 0° relief, the insert provides a stable cutting geometry that resists deflection during heavy cuts and interrupted milling. The modest corner radius of 0.8 mm contributes to edge strength while maintaining acceptable surface finish, balancing robustness and accuracy. The design and tolerance class M ensure reproducible seating and indexed re‑use, which helps to keep clamping errors and setup times to a minimum. For process engineers and workshop managers, this combination translates into predictable cycle times and improved first‑pass yields when machining components from carbon and alloyed steels as well as grey and ductile cast iron. Versatility in application and straightforward integration The cartridge‑style designation and the standardised code simplify tool selection and inventory management; the insert’s suitability for both P (steel) and K (cast iron) workpiece groups makes it a versatile choice across mixed production lines. The part is available in the common plate size 07 with plate thickness code 05 and an execution coded U, enabling straightforward mounting into existing cutter bodies that accept the XNMU070508‑format. Benefit is derived not only from a single insert’s life but from reduced tooling complexity across batches, supporting lean tooling strategies and faster changeovers in the machine shop. For application guidance, grade selection or to request delivery of the XNMU070508‑F57 WKP35G insert, contact Metav Werkzeuge for tailored recommendations and rapid fulfilment. Technical data Article number: XNMU070508-F57-WKP35G-WALTER Designation: XNMU070508-F57 WKP35G Product type: Milling indexable insert Brand: Walter Tools Facts Relief angle: 0° (negative) Corner radius: 0.8 mm Plate size code: 07 Plate thickness code: 05 Chipbreaker: F57 Tolerance class: M Execution: U Special features Coating: Tiger‑tec Gold Grade: WKP35G (coated carbide) Material suitability: steel (P), cast iron (K) Series: Tiger‑tec Gold Designation code: XNMU070508-F57 FAQ What materials is this insert suitable for? The insert is designed for machining steel and cast iron (workpiece groups P and K), with the WKP35G grade and Tiger‑tec Gold coating optimised for those materials. How does the chipbreaker F57 affect process stability? The F57 chipbreaker promotes controlled chip formation and evacuation, which supports consistent cutting forces and reduces the chance of chip re‑entanglement during milling with the XNMU070508‑F57 insert. What does the negative 0° relief mean for heavy milling operations? A negative 0° relief provides a robust cutting edge that improves stability under heavy or interrupted cuts, helping to maintain edge integrity and dimensional consistency across repeated cycles. Can the insert be indexed and reused? Yes, the insert’s standardised form and tolerance class M allow reliable indexing and multiple reuses where the geometry and edge condition remain acceptable. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of the Sandvik Group and is recognised among the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for identification and explanatory purposes only and does not imply any affiliation with the seller.
XNMU070508-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high productivity, durable Tiger‑tec Gold coating and reliable chip control for consistent milling results; order the XNMU070508-F57 WPP35G directly via Metav Werkzeuge or ask the consultants for application guidance. XNMU070508-F57 WPP35G milling indexable insert, Tiger‑tec Gold for steel — Walter Tools The XNMU070508-F57 WPP35G is a coated carbide milling insert from the Tiger‑tec Gold series, optimised for machining steel with stable chip formation and long tool life Tiger‑tec Gold coating for long tool life Optimised for machining steel (ISO P) 0.8 mm corner radius for robust cuts Negative 0° clearance for secure seating High productivity through advanced grade and coating The insert combines the WPP35G grade with the Tiger‑tec Gold coating to deliver a balance of wear resistance and toughness specifically tailored for steel machining. As a coated carbide solution, the grade is designed for the heat and chip characteristics typical of steel cutting, which leads to longer tool life and fewer index changes. Stable wear behaviour and repeatable performance are promoted by the coating technology, improving productivity and reducing tool-system costs per part without sacrificing surface quality. Predictable chip formation and secure edge stability The integrated chipbreaker F57 and the 0.8 mm corner radius enable controlled chip formation and higher process security during interrupted or continuous cuts. The negative 0° clearance ensures secure seating in toolholders and helps maintain positional stability under load, which reduces the risk of chipping at the cutting edge. These characteristics result in consistent surface finish and dimensional stability, particularly in longer runs or when handling variable batch sizes. Easy integration into machine setups and material fit Available in size code 07 with thickness code 05, the insert is specified to tolerance class M and execution U, allowing straightforward replacement in compliant toolholders. The grade is intended for ISO group P (steel), supporting a wide range of unalloyed and alloyed steels as indicated by the grade’s usage profile. Integration is simplified by the standardised geometry and the combination of mechanical seating and coating-driven performance, which reduces setup iterations and contributes to predictable cycle times in production environments. For further technical data or application optimisation, Metav Werkzeuge can be consulted to match cutting parameters and holder selection to the specific machining task. Contact Metav Werkzeuge for tailored cutting data or to request the XNMU070508-F57 WPP35G from Walter Tools for immediate tooling optimisation Technical Data Article number: XNMU070508-F57-WPP35G-WALTER Designation: XNMU070508-F57 ISO designation: XNMU070508-F57 WPP35G Grade: WPP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Plate size code: 07 Thickness code: 05 Corner radius: 0.8 mm Free angle: 0° (negativ) Tolerance class: M Chipbreaker: F57 Execution: U Special features Coated carbide grade (Tiger‑tec Gold) Optimised for steel (ISO P) Balanced wear resistance and toughness Stable chip control and reproducible edge life FAQ What materials is this insert suitable for? The XNMU070508-F57 WPP35G is formulated for ISO group P (steel), covering unalloyed and alloyed steels with performance optimised by the Tiger‑tec Gold coating. How does the chipbreaker F57 affect machining? Chipbreaker F57 provides controlled chip formation for stable evacuation and improved surface quality; its design supports reliable chip control across a range of cutting parameters with the WPP35G grade. What is the advantage of the 0.8 mm corner radius? A corner radius of 0.8 mm increases edge robustness and delivers better resistance to mechanical shock, improving tool life on interrupted cuts and enhancing dimensional stability of the finished component. Is the insert compatible with standard toolholders for size 07? The geometry follows common size 07 conventions and the negative 0° clearance ensures secure seating in compatible holders; toolholder choice should consider cutting forces and intended depth of cut. What benefits does the Tiger‑tec Gold coating bring compared with standard coatings? Tiger‑tec Gold combines surface engineering and substrate interaction to provide improved wear resistance and thermal stability, which results in longer intervals between index changes and more consistent part quality when machining steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods of the manufacturer.
XNMU070508-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of high process reliability and long tool life thanks to the Tiger·tec Gold WSM35G grade and the F57 chipbreaker, designed for secure chip control in demanding materials; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. XNMU070508-F57 WSM35G indexable milling insert — for stainless steels and superalloys | Walter Tools XNMU070508-F57 WSM35G is an indexable milling insert optimised for heavy-duty cutting of stainless steels and heat-resistant superalloys, offering improved edge stability and process security in challenging production environments. Tiger·tec Gold coating technology Optimised for stainless steels and superalloys Corner radius 0.8 mm for robust edge strength Negative rake 0° for secure cutting action Improved process stability for demanding materials The combination of a coated carbide grade and a tailored F57 chipbreaker delivers consistent chip formation when machining tough materials. The Tiger·tec Gold technology provides thermal and mechanical resistance that helps maintain a stable cutting edge even under elevated temperatures. For shops processing a range of difficult-to-machine alloys, this insert reduces the frequency of edge-related disturbances and supports uninterrupted production runs. Technical terms: a chipbreaker shapes chips to improve evacuation; coated carbide refers to a hard substrate with engineered surface layers to resist wear. Reliability and productivity through geometry and grade A corner radius of 0.8 mm and a negative rake (0°) geometry combine to increase edge robustness and reduce chipping during interrupted cuts. These design choices favour durability over the finest surface finish, making the insert ideal where repeatable tool life and predictable tool-change intervals are priorities. The insert size (07) and thickness (05) provide a compact but sturdy cutting edge that fits modern milling toolholders and supports higher feed rates within the grade’s application window. Application guidance and practical benefits This insert is formulated for materials covered by ISO group M (stainless steels) and S (heat-resistant superalloys and titanium), offering broad applicability in aerospace, energy and medical-component machining. The WSM35G grade emphasises wear resistance and stable edge behaviour, helping to reduce rework and avoid thermo-mechanical edge breakdown. For machinists and process engineers, the result is lower scrap rates and improved first-pass yield when set up with appropriate cutting data and coolant strategies. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts for stainless machining and receive tailored application support and tooling recommendations Technical Data Article number: XNMU070508-F57-WSM35G-WALTER Name: XNMU070508-F57 WSM35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Execution: U Tolerance class: M Facts Insert size: 07 Thickness: 05 Corner radius: 0.8 mm Relief angle: 0° (negative) Chipbreaker: F57 Special features Coating technology: Tiger·tec Gold (coated carbide) Material suitability: stainless steels (M); heat-resistant superalloys and titanium (S) Application focus: heavy-duty and heat‑resistant material machining Robust edge geometry for secure chip control FAQ What materials is this insert suitable for? The XNMU070508-F57 WSM35G insert is suitable for stainless steels (ISO group M) and heat-resistant superalloys and titanium (ISO group S) thanks to the Tiger·tec Gold grade designed for thermal and mechanical resistance. Which chip control can be expected from the F57 chipbreaker? The F57 chipbreaker on the XNMU070508-F57 promotes reliable chip formation and evacuation, reducing the risk of built-up edge and improving process stability during milling of tough alloys. How does the 0.8 mm corner radius affect performance? A corner radius of 0.8 mm increases edge strength and wear resistance, extending tool life in interrupted or high-load milling operations while sustaining dimensional stability. Is this insert compatible with standard toolholders? The insert geometry (size 07, thickness 05, execution U) is compatible with milling toolholders designed for indexable inserts of the same ISO designation; holders must match the XNMU070508-F57 pocket and clamping method. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names belong to their respective owners. The mentioned brand is cited solely for explanation; there is no affiliation between our company and the brands named. The offered article is an original, factory-new product of the manufacturer.
XNMU070508-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold PVD-coated grade and the WSP45G variety for reliable milling performance across Steel, rostfreier Stahl and high-temperature alloys; the combination of a 0.8 mm corner radius and a 0° negative clearance promotes stable chip formation and consistent tool life. Order originals via Metav Werkzeuge or request application advice from the consulting team. XNMU070508-F57 WSP45G milling indexable insert — Tiger·tec Gold, for Steel, rostfreier Stahl and superalloys | Walter Tools XNMU070508-F57 WSP45G is a precision-engineered milling indexable insert optimised for versatile milling tasks in demanding materials such as Steel, rostfreier Stahl and heat-resistant alloys Tiger·tec Gold PVD coating for stable edge Suitable for Steel, rostfreier Stahl and superalloys Negative clearance 0° for robust engagement 0.8 mm corner radius for reliable chip control High-performance milling across diverse materials The Tiger·tec Gold coating combined with the WSP45G grade delivers a balance of toughness and wear resistance tailored to milling. This insert is designed for the thermal and mechanical demands of machining Steel, rostfreier Stahl and superalloys, where secure chip formation and edge stability are critical. The PVD-enhanced surface reduces flank wear and supports consistent cutting conditions, which contributes directly to predictable cycle times and less frequent tool changeovers. Such technical reliability translates into measurable production benefits: fewer interruptions and steadier part quality. Stable cutting edge and controlled chip flow for consistent finishes A 0.8 mm corner radius and the F57 chipbreaker work in concert to promote smooth chip separation and preserve the cutting edge during interrupted cuts. The 0° negative clearance geometry increases engagement strength when plunging or face milling, improving resistance to edge chipping under heavy loads. These features mean improved surface integrity and reduced risk of build-up on the cutting edge when working with sticky or tough alloys. For process engineers, this results in more reproducible machining steps and a lower rejection rate. Economical tool life and predictable productivity Built on a coated carbide substrate and belonging to the Tiger·tec Gold series, the insert is engineered for longevity under cyclic thermal stresses typical of high-performance milling. The P/M/S material applicability indicates a broad capability: it is tuned for the heat and chip characteristics of unalloyed and alloyed steels, rostfreier Stahl, and temperature-resistant superalloys or titanium. By favouring a robust grade and coating combination, tool change frequency falls and overall tool cost per part can improve—an outcome that directly supports throughput and production planning. Practical selection and integration into machining systems The format and dimensions of the insert make it compatible with standard milling cutters accepting the 07 size and 05 thickness family, with tolerance class M ensuring interchangeability in accurate tool systems. The specified execution U and the ISO designation in the item code make it straightforward to match the insert to appropriate cutter bodies and clamping designs. For process set-up, note the intended chipformer and radius when defining feeds and speeds to achieve the best balance between material removal rate and surface finish. The insert name XNMU070508-F57 WSP45G can be quoted when ordering or when checking holder compatibility. Contact Metav Werkzeuge for tailored machining recommendations and to obtain original Walter Tools Tiger·tec Gold inserts directly through Metav Werkzeuge. Technical data Article number: XNMU070508-F57-WSP45G-WALTER Item designation: Milling indexable insert Grade: WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Clearance angle: 0° Plate size: 07 Plate thickness: 05 Tolerance class: M Special features Tiger·tec Gold PVD coating Chipbreaker: F57 Geometry/execution: U Material applicability: Steel; rostfreier Stahl; superalloys (P / M / S) Suitable for milling operations and interrupted cuts FAQ Which materials are best machined with this insert? The XNMU070508-F57 WSP45G insert is intended for Steel, rostfreier Stahl and heat-resistant superalloys; its Tiger·tec Gold coating and grade characteristics support secure chip formation and edge stability across these groups. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm radius provides a durable cutting edge that balances strength and surface quality; it reduces vulnerability to chipping while still permitting acceptable edge definition in typical milling operations. Is the insert suitable for heavy interrupted cuts? Yes. The negative clearance 0° geometry and the robust grade make the insert particularly resistant to edge shock, which is advantageous for interrupted milling and form milling applications. What is the role of the F57 chipbreaker? The F57 chipbreaker is designed to promote controlled chip formation and evacuation, reducing the risk of long, stringy chips and supporting consistent surface integrity during continuous or semi-continuous milling. How should the insert designation be quoted for ordering or compatibility checks? Use the full identifier XNMU070508-F57 WSP45G when checking holder compatibility or when placing an order, and specify the cutter body type and size to ensure proper fit and performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product from the manufacturer.
XNMU0705ANN-F27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold technology and the WKK25G grade for consistent chip control and extended tool life when machining cast iron; the combination of wear-resistant coating and a 0° negative rake ensures process stability and reliable results in series production. For ordering or specific application advice, contact Metav Werkzeuge to discuss suitability and availability. XNMU0705ANN-F27 WKK25G — milling indexable insert for cast iron by Walter Tools XNMU0705ANN-F27 WKK25G is a dedicated milling indexable insert designed for efficient machining of cast iron under demanding, production-oriented conditions Tiger·tec Gold coating for wear resistance Optimised for cast iron machining (ISO K) 0° negative rake for stable cutting Tolerance class M for consistent seating Stable performance when cutting cast iron The WKK25G grade, incorporated in this insert, is formulated specifically for cast iron applications and addresses the abrasive wear and short, brittle chips typical of these materials. The combination of a wear-resistant coating and a robust substrate results in stable chip formation and predictable tool life. By reducing unexpected edge breakdown and maintaining cutting-edge integrity, operators achieve more consistent part quality and fewer tool changes, which supports higher uptime and steady production throughput. Longer tool life and process reliability from Tiger·tec Gold The Tiger·tec Gold series provides a multilayered coating system optimised for heat resistance and abrasion protection. In practice, this translates to prolonged cutting performance and improved surface finish on cast iron components. The 0° negative rake geometry enhances mechanical stability at the cutting edge, making the insert well suited to interrupted cuts and demanding feed conditions. These features combine to lower tooling costs per component and contribute to a more economical machining process. Simple integration into existing toolholders and workflows Designed with a standard ISO designation and M tolerance, this indexable insert fits common milling toolholders and fixtures without extensive modification. The chipbreaker type F27 is engineered to control fragmented chips typical of grey and nodular cast irons, easing chip evacuation and reducing rework. In production environments where repeatability matters, the consistent seating and predictable wear behaviour of the insert support process control and quality assurance protocols. For application-specific recommendations, technical consultation is available to match insert selection to machining parameters. For machining cast iron with superior wear resistance and process stability, contact Metav Werkzeuge for tailored application advice and a quote for the Walter Tools XNMU0705ANN-F27 WKK25G milling insert Technical data Article number: XNMU0705ANN-F27-WKK25G-WALTER SKU: XNMU0705ANN-F27-WKK25G-WALTER Product type: Milling indexable insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Numbers / Core technical data ISO designation: XNMU0705ANN-F27 WKK25G Grade / Sort: WKK25G Plate size: 07 Plate thickness: 05 Chipbreaker: F27 Rake angle: 0° (negativ) Tolerance class: M Execution: U Designs / Special features Series: Tiger·tec Gold Material designation: K (suitable for cast iron) Application focus: Cast iron (ISO K) Stable chip formation for brittle chips Wear-resistant coated cemented carbide FAQ What materials is this insert intended for? The XNMU0705ANN-F27 WKK25G insert from Walter Tools is specifically developed for cast iron (ISO K) machining, addressing abrasive wear and brittle chip behaviour. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WKK25G grade improves heat and abrasion resistance, which extends tool life and helps maintain consistent component quality in series production. Is the insert suitable for interrupted cuts? Yes, the 0° negative rake geometry offers enhanced mechanical stability at the cutting edge, making the insert suitable for interrupted cuts and tough engagement conditions. What chip control can be expected with the F27 chipbreaker? The F27 chipbreaker is optimised for fragmented chips commonly produced when machining cast iron, supporting effective chip evacuation and reducing the risk of re-cutting. How precise is the seating and interchangeability of the insert? With tolerance class M, the insert provides consistent seating accuracy and interchangeability in standard toolholders, aiding repeatable machining results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of Walter Tools.
XNMU0705ANN-F27 WKP25S Wendeplatten - Walter Tools
Taking advantage of the combination of Tiger‑tec Silver coating, a specialised WKP25S grade and negative geometry, this indexable insert delivers consistent performance when machining steel and cast iron; order via Metav Werkzeuge or consult our technical advisors for tailored application support. XNMU0705ANN-F27 WKP25S — Fräswendeschneidplatte (indexable milling insert) by Walter Tools, Tiger‑tec Silver, for steel and cast iron XNMU0705ANN-F27 WKP25S is a coated carbide milling insert designed for robust material removal in steel and cast iron applications, featuring a negative 0° geometry and an F27 chipbreaker for controlled chip formation. Tiger‑tec Silver coating for improved wear resistance WKP25S grade tuned for steel and cast iron machining Negative 0° geometry for stable shoulder milling F27 chipbreaker for reliable chip control High process reliability through a dedicated coating and grade The combination of the Tiger‑tec Silver coating with the WKP25S grade produces a coated carbide surface that resists abrasive wear and thermal loads typical when machining steel and cast iron. This results in steadier cutting performance and extended tool life, which supports predictable production cycles. The insert’s coating technology reduces flank and crater wear, making it suitable for serial and batch milling operations where consistent surface finish and repeatability are required. Geometry and chip control that stabilise heavy milling cycles A negative 0° rake angle and the F27 chipbreaker are engineered to promote stable engagement at machining depths and feed rates commonly used in shoulder and face milling. The negative geometry increases cutting edge robustness and reduces vibration, while the chipbreaker shapes and evacuates chips reliably to prevent re-cutting. Together, these features enable safe, high-material-removal-rate processes with improved surface integrity. Practical compatibility and tolerance for precision setups Identified by the ISO designation XNMU0705ANN-F27 WKP25S, this insert conforms to a tolerance class M, ensuring dimensional consistency for secure clamping and repeatable tool offsets in standard toolholders. Its plate size 07 and thickness 05 are compatible with established milling cutter bodies that accept this format, allowing straightforward integration into existing tool inventories. The result is reduced setup variability and predictable calibration intervals for quality-focused production lines. Contact Metav Werkzeuge for application advice and to order Walter Tools inserts (XNMU0705ANN-F27 WKP25S); eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XNMU0705ANN-F27-WKP25S-WALTER Product name: Fräswendeschneidplatte XNMU0705ANN-F27 WKP25S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 07 Plate thickness: 05 Clearance/rake: 0° (negative) Chipbreaker: F27 Tolerance class: M Special features Grade: WKP25S (coated carbide) Material suitability: P (steel) Material suitability: K (cast iron) ISO designation: XNMU0705ANN-F27 WKP25S Execution: U FAQ What materials can be machined with this insert? The insert is specified for steel (P) and cast iron (K) applications; the WKP25S grade and Tiger‑tec Silver coating are optimised for these material groups. How does the negative 0° geometry affect performance? Negative 0° geometry increases edge strength and stability during shoulder and face milling, improving resistance to vibration and enabling heavier cutting parameters with reliable tool life. Which chipbreaker is fitted and what is its benefit? This insert features the F27 chipbreaker, which promotes consistent chip segmentation and evacuation, reducing the risk of chip entanglement and improving surface finish during interrupted cuts. Is this insert compatible with standard toolholders? The ISO designation XNMU0705ANN-F27 WKP25S and tolerance class M indicate compatibility with cutter bodies designed for 07-format inserts and ensure accurate clamping and repeatable tool offsets. What production advantages does the Tiger‑tec Silver series bring? The Tiger‑tec Silver coating offers enhanced wear resistance and thermal stability, which supports longer cutting intervals and more consistent surface quality in medium to high-volume milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The item offered is original, factory-new merchandise of the manufacturer. Walter Tools (Walter AG) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group.
XNMU0705ANN-F27 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for reliable performance in steel and cast iron milling; the F27 chipbreaker and 0° negative rake ensure consistent chip control and sturdy cutting behaviour. Order the insert directly via Metav Werkzeuge or consult their experts for geometry and application advice. XNMU0705ANN-F27 WKP35G milling insert — Tiger·tec Gold grade for steel and cast iron by Walter Tools The XNMU0705ANN-F27 WKP35G milling insert is a coated carbide grade designed for productive milling of steel and cast iron, combining a Tiger·tec Gold coating with an F27 chipformer and a negative 0° relief for stable, repeatable cuts Tiger·tec Gold coating for extended tool life WKP35G grade for steel and cast iron F27 chipbreaker for precise chip control 0° negative rake for stable cutting Consistent productivity through advanced coating and grade The Tiger·tec Gold coating paired with the WKP35G grade brings wear resistance and heat management that translate into longer edge life and fewer tool changes. In practical terms, the coated carbide composition reduces flank and crater wear under typical milling temperatures, so process windows remain stable over extended runs. For production environments where uptime and predictable tool performance matter, this combination contributes directly to throughput and lower tool consumption. Reliable chip formation and machining behaviour The integrated F27 chipbreaker and the 0° negative rake geometry are designed to produce controllable, repeatable chips when working with steel (ISO group P) and cast iron (ISO group K). The breaker shape promotes short, segmented chips in abrasive or breaking-material conditions, reducing the risk of entanglement and improving surface integrity. As a result, machining dynamics become easier to manage, especially in mixed-production setups that require quick tool changes and consistent part quality. Geometry and dimensional stability for precision milling With a size designation of 07 and a plate thickness of 05, the insert supports secure clamping and defined cutting edges that aid repeatability in milling operations. The tolerance class M ensures dimensional consistency across batches, which is important for indexable tooling systems that rely on precise seating. These geometric attributes reduce variation between inserts and support stable cutter balancing and predictable tool-life calculations. Integration into process chains and selection guidance This insert is part of the Tiger·tec Gold series, developed for broad applicability across steels and cast irons while delivering stable chip control and reliable edge life. When optimising cutting parameters, start from conservative speeds and feeds suited to the WKP35G grade and increase progressively while monitoring tool wear. For questions about compatibility with specific cutter bodies or to verify suitability for a particular material or operation, Metav Werkzeuge provides technical guidance and catalogue details to aid selection. Choose Walter Tools' Tiger·tec Gold WKP35G grade for demanding milling applications and contact Metav Werkzeuge for tailored recommendations and fast supply. Technical data Article number: XNMU0705ANN-F27-WKP35G-WALTER Designation: XNMU0705ANN-F27 Product type: milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Core specifications Size: 07 Thickness: 05 Relief angle: 0° (negative) Tolerance class: M Features / applications Coating: Tiger·tec Gold Material suitability: P (steel), K (cast iron) Chipbreaker: F27 Series description: coated cemented carbide FAQ Which materials can be machined with this insert? The XNMU0705ANN-F27 WKP35G insert is specified for ISO groups P (steel) and K (cast iron), reflecting the WKP35G grade and Tiger·tec Gold coating performance. How does the WKP35G grade affect performance? WKP35G, as a coated carbide grade within the Tiger·tec Gold family, offers improved wear resistance and thermal stability, which helps maintain cutting edge integrity and extends productive tool life. What is the purpose of the F27 chipbreaker? The F27 chipbreaker promotes controlled chip segmentation and evacuation, improving surface quality and reducing the likelihood of chip-related interruptions during milling. What dimensions and tolerance class does this insert use? This item corresponds to size 07, thickness 05 and tolerance class M, providing consistent seating and repeatable geometry for indexable cutter systems. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes; there is no connection between our company and the mentioned brands. The offered article is an original, factory-new product from Walter Tools.
XNMU0705ANN-F27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP35G grade for durable, versatile steel machining; the 0° negative rake and F27 chipbreaker ensure stable chip control and predictable tool life. Order via Metav Werkzeuge or consult their technical team for application-specific recommendations. XNMU0705ANN-F27 WPP35G milling insert, Tiger·tec Gold – Walter Tools A XNMU0705ANN-F27 WPP35G milling indexable insert engineered for robust steel machining, combining a Tiger·tec Gold coated grade with a 0° negative rake for reliable performance Tiger·tec Gold coating for long tool life Optimised WPP35G grade for steel machining 0° negative rake for robust chip control Compatible insert size 07, thickness 05 Enhanced life and steady performance with Tiger·tec Gold The Tiger·tec Gold coating and WPP35G grade form a balanced system that extends edge life while maintaining cutting stability under typical steel cutting conditions. Designed for the ISO P group, this coated carbide grade resists thermal and abrasive wear arising from steel machining, delivering a lower cost per component through fewer tool changes and extended service intervals. The combination of coating technology and substrate results in improved process reliability and consistent surface quality, which supports higher machine uptime and predictable production planning. Consistent chip control and robust edge geometry for productive machining The insert’s 0° negative rake and F27 chipbreaker provide controlled chip formation and strong edge integrity, especially in interrupted cuts or heavier depths of cut. Negative rake geometries increase the effective cutting edge strength, reducing susceptibility to chipping and ensuring stable sectioning of the chip stream. The engineered chipbreaker promotes short, manageable chips and contributes to a better finish and safer swarf evacuation, which together reduce secondary handling and cleaning efforts on the shop floor. Simple integration and workshop efficiency for cutting-tool fleets With the ISO designation XNMU0705ANN-F27 WPP35G, tolerance class M and standard insert dimensions (size 07, thickness 05), this indexable plate fits common milling toolholders designed for XNMU-format inserts. Its execution and material pairing make it suitable for a broad range of steel applications, from stable high-speed operation to more demanding interrupted tasks. The predictable wear behaviour and reduced need for frequent regrinding simplify tooling logistics and support lean inventory management across production lines. Walter Tools’ series design and material coding also aid fast tool selection and repeatable results in batch production. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on this Walter Tools Tiger·tec Gold insert Technical data SKU: XNMU0705ANN-F27-WPP35G-WALTER Designation: XNMU0705ANN-F27 WPP35G Type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger·tec Gold Grade: WPP35G Tolerance class: M Facts Insert size: 07 Thickness: 05 Free rake angle: 0° (negative) Chipbreaker: F27 Special features Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO group P) Execution: U Plate designation without grade: XNMU0705ANN-F27 FAQ What materials is this insert suitable for? The XNMU0705ANN-F27 WPP35G milling insert is designed primarily for steel (ISO group P), optimised to handle typical heat and chip formation encountered when machining unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP35G grade reduces flank and crater wear, enhancing tool life and process stability when the insert is used for steel machining with the XNMU0705ANN-F27 specification. Is this insert suitable for interrupted cuts or heavy roughing? Yes, the 0° negative rake geometry combined with the robust substrate of the WPP35G grade and the F27 chipbreaker provides strong edge resistance, making the insert well suited to interrupted cuts and more aggressive metal removal. What role does the F27 chipbreaker play? The F27 chipbreaker is engineered to create short, controllable chips and improve surface finish in steel machining, helping to reduce swarf-related issues and post-process cleaning. Which toolholders accept this insert and what are its nominal dimensions? The insert follows the XNMU-format (designation XNMU0705ANN-F27) with size 07 and thickness 05; it is compatible with milling cutters that accept XNMU-series indexable inserts and tolerance class M. Manufacturer: Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany. The Walter AG (brand: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanatory purposes only and do not indicate a commercial connection between our company and the named brands.
XNMU0705ANN-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, Tiger·tec Silver coating and a robust chipformer F57 for consistent milling results; order the XNMU0705ANN-F57 WKP25S directly via Metav Werkzeuge or consult our advisors for application guidance. XNMU0705ANN-F57 WKP25S milling insert – Tiger·tec Silver, 0° negative rake, Walter Tools XNMU0705ANN-F57 WKP25S is a coated milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating Optimised chipformer F57 Suitable for steel and cast iron 0° negative rake for robust cutting Consistent productivity through engineered cutting performance The insert delivers reliable results by combining the WKP25S grade with the Tiger·tec Silver coating, engineered for stable edge life and predictable wear behaviour. This combination reduces process variability in series production and supports sustained cutting parameters under typical milling loads. The geometry, featuring a 0° negative rake, promotes a robust cutting edge that tolerates interruptions and heavy feed rates, while the optimised chipformer F57 improves chip control to prevent re-cutting and reduce downtime. Material versatility and application benefits for common workshop needs Designed primarily for machining steel and cast iron, the indexable insert suits a wide range of workshop tasks from roughing to semi-finishing. The coated carbide base of the grade resists abrasive wear encountered with grey cast iron and maintains edge stability when machining alloyed and unalloyed steels. For engineers and buyers seeking an economical, long-running solution, the tool’s construction supports predictable tool-change intervals and easier process planning thanks to the known behaviour of the grade under the ISO P and K classifications. Handling, tool life and integration into existing tool systems The insert’s standard format and tolerance class M enable straightforward insertion into compatible milling cutters, simplifying stock management and changeover. The 05 plate thickness and 07 plate size combine to offer mechanical stability without excessive bulk, aiding thermal dissipation and minimising chipping risk. Specifying this insert for production setups contributes to efficient maintenance schedules and clearer inventory mapping, while the proven Walter Tools manufacturing standards support reproducible part quality across batches. For reliable milling with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for order placement or application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XNMU0705ANN-F57-WKP25S-WALTER Designation: XNMU0705ANN-F57 WKP25S Manufacturer: Walter Tools Facts Plate size: 07 Plate thickness: 05 Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP25S (coated carbide) Chipformer: F57 Execution: U Material suitability: P (steel), K (cast iron) Suitable for productive milling applications FAQ Which materials are recommended for this insert? The XNMU0705ANN-F57 WKP25S insert is recommended for steel and cast iron machining according to its WKP25S grade and Tiger·tec Silver coating; it is optimised for the ISO P and K groups. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this Walter Tools milling insert enhances edge life and wear resistance, improving process stability and enabling longer uninterrupted cutting cycles. How does the F57 chipformer affect machining? The chipformer F57 promotes consistent chip breakage and evacuation in milling operations, reducing the risk of chip interference and helping to maintain surface quality during heavy or interrupted cuts. Is the insert suitable for heavy interrupted cuts? Yes, the 0° negative rake geometry and the robust grade WKP25S make this insert suitable for demanding conditions, including interrupted and heavy milling where edge strength is critical. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNMU0705ANN-F57 WKP35G Wendeplatten - Walter Tools
Benefit from a combination of long tool life and stable chip control thanks to the Tiger·tec Gold coating and the chipformer F57; the robust 0° negative-rake geometry ensures dependable performance in demanding milling operations. Order directly via Metav Werkzeuge or consult their specialists for cutting data and process recommendations. XNMU0705ANN-F57 WKP35G milling insert — Tiger·tec Gold, for steel and cast iron, Walter Tools The XNMU0705ANN-F57 WKP35G is a negative-rake milling insert engineered for high-productivity machining of steel and cast iron in short- to medium-chipping conditions. Tiger·tec Gold coating for longer tool life Optimised chipformer F57 for reliable chip control 0° negative rake for robust milling performance Suitable for steel (P) and cast iron (K) Increased productivity through advanced coating and grade The XNMU0705ANN-F57 WKP35G benefits from the Tiger·tec Gold coating combined with a coated-carbide base to deliver consistent wear resistance and predictable tool life. This technological combination reduces flank and crater wear in interrupted and continuous milling, translating into longer indexable insert life and fewer tool changes. For production environments where cycle time and uptime matter, the coated grade minimises unscheduled downtime and supports stable process windows on unalloyed and alloyed steels. Predictable chip control for continuous operation The insert’s built-in chipformer F57 provides targeted chip control, promoting secure chip evacuation and reduced re-cutting of swarf. Improved chip flow lowers the risk of surface damage and enables stable feeds at productive cutting speeds. In mixed-production setups where different batch sizes are processed, the optimised chip geometry helps maintain surface quality while reducing the need for excessive manual chip management or machine stoppages. Robust geometry for heavy and interrupted cuts The 0° negative rake geometry offers a sturdy cutting edge that resists edge chipping under heavy radial loads and interrupted cuts. This design choice favours robustness over edge sharpness, making the insert particularly suitable for demanding roughing operations and for tools subject to variable engagement. The stable edge line supports consistent dimensional results and helps protect the toolholder interface from shock loads during tough milling conditions. Clear material range and process integration Designed for ISO group P (steel) and K (cast iron), the grade WKP35G and Tiger·tec Gold series provide a broad workpiece coverage for general industrial machining. The insert is available in plate size code 07 with plate thickness 05 and tolerance class M, enabling straightforward selection for common milling tool bodies. Integration into existing tool programmes is simple: the geometry and chipformer combine to deliver repeatable results, while the coated grade supports a balance of wear resistance and edge stability for mixed-material production. For tailored cutting data, availability and application advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for prompt recommendations and order support. Technical data SKU: XNMU0705ANN-F57-WKP35G-WALTER Designation: XNMU0705ANN-F57 Grade: WKP35G Series: Tiger·tec Gold Rake angle: 0° (negative) Chipformer: F57 Plate size: 07 Plate thickness: 05 Tolerance class: M Execution: U Material applicability: P / K Numbers / Core technical data Plate size: 07 Plate thickness: 05 Rake angle: 0° Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade description: WKP35G, coated carbide Chip control: Chipformer F57 Material groups: Steel (P), Cast iron (K) Geometry: Negative-rake milling insert FAQ What materials are suitable for this insert? The insert is suitable for machining steel (ISO group P) and cast iron (ISO group K); the WKP35G grade and Tiger·tec Gold coating are tuned to handle the heat and abrasive wear typical for these materials. Which chipformer does this insert use and why does it matter? This insert features the chipformer F57, which provides controlled chip formation and evacuation to reduce re-cutting and support continuous production. How does the 0° negative rake affect milling performance? A 0° negative rake geometry increases edge robustness and resistance to chipping, making the insert well suited to heavy cuts and interrupted milling where a stable cutting edge is required. Is this insert compatible with common milling tool bodies? The size code 07 and the standard top geometry allow integration into many common milling tool systems that accept XNMU-style indexable inserts; check holder compatibility for the plate thickness 05 and tolerance class M. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold offers improved wear resistance and process reliability in mixed production environments, delivering longer tool life and consistent surface quality across steel and cast-iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by those brands. The offered item is original, brand-new manufacturer goods.
XNMU0705ANN-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the insert’s combination of Tiger·tec Gold coating for extended tool life and the F57 chipbreaker for reliable chip control to increase milling productivity on steel. Order the insert directly via Metav Werkzeuge or consult the team for application advice. XNMU0705ANN-F57 WPP35G — Milling indexable insert for steel, Tiger·tec Gold, Walter Tools The XNMU0705ANN-F57 WPP35G is a negative‑rake milling indexable insert optimised for productive steel machining in ISO P applications Tiger·tec Gold coating for improved tool life Design optimised for steel machining (ISO P) F57 chipbreaker for controlled chip formation Negative 0° rake for a stable cutting edge Increase productivity with reliable wear resistance The Tiger·tec Gold grade WPP35G combines a coated carbide substrate with a wear‑resistant top coat to deliver consistently long tool life in serial milling of steel. The insert’s coating technology reduces flank and crater wear, which translates into fewer index changes and longer uninterrupted machining runs. For production environments where cycle times and machine utilisation are decisive, this results in measurable efficiency gains and lower tooling consumption per part. Controlled chips and process security for demanding operations Equipped with the F57 chipbreaker and a negative 0° rake, the insert is engineered for stable chip formation under the thermal and mechanical conditions typical of steel cutting. The chip geometry supports predictable evacuation and reduces the risk of built‑up edge formation, enabling higher feeds and secure operation on CNC milling heads. As a consequence, surface finish and dimensional consistency are improved while operator intervention is minimised. Robust geometry and tolerance for consistent results The robust plate geometry (size 07, thickness 05) and tolerance class M ensure repeatable seating and reliable cutting performance across toolholders. The grade’s balance of toughness and wear resistance (rated for steel: tenacious and universally applicable characteristics) makes the insert well suited to a range of steel types and cutting strategies. Clear specification of the insert’s physical parameters simplifies tool selection and inventory management in production planning. Practical benefits for workshop and production planners Adopting this indexable solution supports a pragmatic tool strategy: fewer grades required, straightforward sorting by the WPP35G designation, and predictable tool life under controlled conditions. The insert’s specification aids programming choices — stable cutting edge geometry allows confident step‑overs and axial engagement adjustments — helping to shorten setup time and reduce scrap rates. The result is a more economical machining process with consistent part quality. Contact Metav Werkzeuge for application support on Walter Tools inserts and to arrange supply of the XNMU0705ANN-F57 WPP35G via Metav Werkzeuge GmbH Technical Data Article number: XNMU0705ANN-F57-WPP35G-WALTER ISO designation: XNMU0705ANN-F57 WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Execution: U Tolerance class: M Material classification: P (steel) Facts Plate size: 07 Plate thickness: 05 Free rake: 0° (negative) Chipbreaker: F57 Special features Coated carbide grade (Tiger·tec Gold) Optimised for steel machining (ISO P) Stable chip control and controlled chip breaker geometry Robust geometry for production milling FAQ What materials is this insert suitable for? The insert is specified for steel (ISO P) machining; the WPP35G grade and Tiger·tec Gold coating are optimised for the heat and chip formation typical of steel cutting. Which chipbreaker does the insert use and what is its benefit? The insert uses the F57 chipbreaker, which provides controlled chip formation and improved evacuation to support stable milling operations. What is the rake and how does it affect cutting? The insert features a negative 0° rake, supplying a robust cutting edge that favours stability and resistance to mechanical shock during heavy or interrupted cuts. How does the Tiger·tec Gold technology help in production? Tiger·tec Gold coating enhances wear resistance and reduces flank and crater wear, extending index life and contributing to longer machining cycles with less frequent index changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
XNMU0705ANN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for reliable chip control and extended edge life when machining stainless steels and heat‑resistant alloys; the robust 0° negative rake and F57 chipbreaker support stable cutting and predictable component quality. Order the insert directly via Metav Werkzeuge or ask the technical consultants for tailored recommendations. XNMU0705ANN-F57 WSM35G milling indexable insert — Tiger·tec Gold, 0° negative rake (Walter Tools) A XNMU0705ANN-F57 WSM35G milling indexable insert designed for heavy cutting in stainless steels and heat‑resistant superalloys, combining a wear‑resistant coating with a geometry tuned for stable chip formation. Tiger·tec Gold coating for edge stability Optimised F57 chipbreaker for consistent chips Specifically for stainless steels and superalloys Negative 0° rake for robust cutting performance Stable cutting in stainless steels and superalloys The combination of the Tiger·tec Gold coating and the WSM35G cutting grade delivers improved thermal resistance and wear behaviour when machining tough materials. The insert is a coated carbide design that supports secure chip control in materials that tend to work‑harden or produce long, stringy chips. The F57 chipbreaker reduces the risk of built‑up edge and helps maintain a consistent cutting zone, which in turn lowers rework rates and contributes to repeatable surface quality. Geometry built for robustness and process security A 0° negative rake and compact geometry provide a stable cutting edge when heavy cuts are required; the insert’s size and thickness codes (07 / 05) indicate a profile suited to high radial and axial loads. The tolerance class M ensures dimensional consistency across changes of insert, supporting predictable tool behaviour and simplified tool presetting. Together, these elements reduce chatter susceptibility and support longer effective tool life in demanding shopfloor conditions. Productivity through predictable performance The deposit‑type coating and matching substrate chemistry ensure consistent wear progression rather than abrupt flank failure, which contributes to uninterrupted production sequences. With a reliable chip control strategy based on the F57 breaker, tool changes and machine downtime are reduced, so cycle times become more consistent. The net effect is improved process efficiency and fewer scrap parts during series production runs. Practical application notes and selection guidance The insert is intended primarily for machining in the ISO groups S and M, i.e., superalloys and stainless steels; this aligns with the design purpose of the WSM35G grade. As performance depends on toolholder rigidity, cutting parameters and workpiece clamping, the insert is best deployed in setups that provide stable support and appropriate coolant application when required. For specific machining windows, insert variants and compatible cutter bodies, Metav Werkzeuge’s technical team can supply parameter recommendations and application guidance. Contact Metav Werkzeuge for tailored tool selection and parameter support for the Tiger·tec Gold WSM35G insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XNMU0705ANN-F57-WSM35G-WALTER Product: Milling indexable insert XNMU0705ANN-F57 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert size: 07 Thickness code: 05 Rake angle: 0° (negative) Tolerance class: M Special features Grade: WSM35G Chipbreaker: F57 Execution: U Material application: S / M (superalloys / stainless steels) Designation: XNMU0705ANN-F57 Suitable for machining stainless steels FAQ What materials is this insert intended for? The XNMU0705ANN-F57 WSM35G insert from Walter Tools is aimed at machining ISO groups M and S, i.e. stainless steels and heat‑resistant superalloys, where stable chip formation and thermal resistance are required. How does the F57 chipbreaker affect machining? The F57 chipbreaker on the insert promotes consistent chip control and helps to prevent long, stringy chips, improving process reliability and facilitating safer evacuation of chips during milling. Is the 0° negative rake suitable for heavy cuts? Yes — the negative 0° rake on this indexable plate provides a robust cutting edge suited to heavy radial and axial loads, enhancing edge stability under demanding conditions. Can this insert be used for finishing as well as roughing? The Walter Tools WSM35G grade and the F57 breaker support a range of cutting conditions; depending on cutter geometry and parameters, the insert can be applied across roughing and medium finishing operations with attention to appropriate feeds and speeds. Which series does the grade belong to and what benefit does that bring? The grade is part of the Tiger·tec Gold series; this coating technology contributes to improved wear resistance and process stability when working with stainless steels and superalloys. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany.
XNMU0705ANN-F57 WSP45G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold PVD coating with the WSP45G grade and an optimised F57 chipbreaker, this insert delivers reliable edge stability and broad material coverage for efficient milling of Stahl, rostfreier Stahl and heat‑resistant alloys — order directly via Metav Werkzeuge or contact our consultants for tailored machining advice. XNMU0705ANN-F57 XNMU0705ANN-F57 WSP45G — Indexable Milling Insert for Stahl, rostfreier Stahl and Superalloys (Tiger‑tec Gold, 0° negative) by Walter Tools A XNMU0705ANN-F57 WSP45G indexable milling insert engineered for high‑productivity slotting and face milling across a wide range of materials, offering stable cutting performance under varying cutting conditions. Tiger‑tec Gold PVD coating WSP45G: versatile PVD grade 0° negative rake for heavy cuts Optimised F57 chipbreaker for stable chips High productivity through proven coating and grade The combination of the Tiger‑tec Gold surface technology and the WSP45G grade provides a PVD‑coated carbide solution optimised for continuous and interrupted milling. This results in a durable cutting edge that maintains form at elevated cutting speeds, enabling a greater metal removal rate with predictable tool life. The selected grade supports stable cutting across the ISO groups P / M / S, which translates into efficient machining of Stahl, rostfreier Stahl and demanding high‑temperature alloys. By prioritising material compatibility and edge integrity, the insert reduces downtime associated with frequent index changes and contributes to a steadier production flow. Secure chip formation and surface quality for consistent parts Designed with the F57 chipbreaker and a 0° negative rake, the insert promotes controlled chip formation and reliable evacuation during medium to heavy cuts. The F57 geometry is tuned to produce manageable chips and reduce the risk of built‑up edge on tougher materials, which helps preserve surface finish and dimensional consistency. With a tolerance class of M and the compact plate geometry (size 07, thickness 05), the component offers repeatable seating and minimal runout in common milling holders, supporting reproducible results across batch production runs. Versatility in application and clear material guidance The insert is intended for general milling tasks where flexibility is required: roughing, semi‑finishing and finishing operations can be balanced by selecting appropriate feeds and depths of cut. The marking of material groups P / M / S indicates suitability for Stahl, rostfreier Stahl and heat‑resistant superalloys/titanium — the geometry and grade combination ensure thermal and mechanical resistance where heat accumulation and toughness are typical challenges. Practical advantages include simplified tool selection for mixed‑material workpieces and a reduced inventory burden by using one high‑performance grade across several applications. For precise application support and to secure the best performance from Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for machining recommendations and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: XNMU0705ANN-F57-WSP45G-WALTER Label: Fräswendeschneidplatte XNMU0705ANN-F57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WSP45G Execution: U Facts Size: 07 Thickness: 05 Free rake: 0° (negative) Chipbreaker: F57 Tolerance class: M Special features PVD‑coated carbide (Tiger‑tec Gold) Versatile WSP45G grade Material groups: P / M / S Suitable for Stahl, rostfreier Stahl, superalloys/titan Optimised for stable chip formation and edge life FAQ What materials can this insert machine effectively? The XNMU0705ANN‑F57 WSP45G insert is specified for material groups P / M / S and is therefore suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys/titan. How does the F57 chipbreaker affect machining performance? The F57 chipbreaker promotes controlled chip formation, improving evacuation and reducing built‑up edge, which supports better surface finish and longer cutting edge life with the WSP45G grade. Is the insert suitable for interrupted cuts? Yes, the combination of the Tiger‑tec Gold PVD coating and the robust WSP45G grade provides enhanced edge stability that copes well with interrupted milling conditions. Which holder types are compatible with this plate size? The plate format (size 07, thickness 05) fits standard indexable milling holders designed for this geometry; ensure the correct seat and clamp are used to maintain tolerance class M. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; no affiliation with our company is implied. The offered item is original and factory‑new.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com