CCGW09T308TM-2 WBH20 Wendeplatten - Walter Tools
Combining CBN wear resistance with a 0.8 mm corner radius and a 7° clearance, this insert delivers stable cutting and extended tool life for hard machining operations; order the CCGW09T308TM-2 WBH20 insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGW09T308TM-2 WBH20 indexable insert for hard machining — Walter Tools (CBN grade, Rhombic 80°) The CCGW09T308TM-2 WBH20 is an indexable turning and boring insert engineered for hard machining of hardened steels and similar challenging materials, offering high wear resistance and consistent performance. CBN grade WBH20 for hard machining Rhombic 80° insert form 7° clearance for stable cutting 0.8 mm corner radius for edge strength Optimised CBN grade for durable hard machining The WBH20 grade uses CBN (cubic boron nitride) as the cutting material, which is purposely formulated for high-wear tasks on hardened steels (ISO 513 group H). This results in reliable tool life and lower frequency of insert changes compared with conventional carbide in similar applications. The material's inherent abrasion resistance reduces flank wear, supporting longer uninterrupted production runs and fewer process interruptions, which in turn helps to maintain consistent batch quality and reduce scrap rates. Geometry that improves process stability and surface finish The Rhombic 80° form combined with a 7° clearance angle delivers a robust cutting geometry that resists edge chipping during interrupted cuts and heavy engagement. The 0.8 mm corner radius increases edge strength while still permitting acceptable surface quality on finishing passes. The integrated chipbreaker 2 promotes controlled chip formation in hard turning, reducing the risk of entanglement and safeguarding both the workpiece and the toolholder. Together these features contribute to predictable cycle times and improved first-pass yield. Practical benefits for production planning and machining security Designed as part of the Walter CBN / Hartstoff series, this indexable insert supports a targeted strategy for hard finishing and hard turning operations, offering process security and repeatable results. Specified tolerance class G and the insert's standardised designation make tool management straightforward and reduce setup variability. Use of a CBN-grade insert like this one can lower overall tooling consumption and contribute to more efficient scheduling by extending service intervals and simplifying inventory choices for hardened-steel applications. Contact Metav Werkzeuge for tailored application guidance on the Walter Tools CCGW09T308TM-2 WBH20 insert and to discuss current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCGW09T308TM-2-WBH20-WALTER Designation: CCGW09T308TM-2 WBH20 Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombic 80° Size: 09 Thickness: T3 Chipbreaker: 2 Tolerance class: G Special features CBN grade WBH20, Walter CBN / Hartstoff series Intended for hardened steels (ISO 513 H) Stable edge for hard machining Rhombic 80° geometry for versatile turning and boring FAQ What materials is this insert suitable for? The CCGW09T308TM-2 WBH20 insert is designed primarily for hardened steels (ISO 513 group H) and related hard materials; its CBN cutting grade provides the required wear resistance for these applications. How does the Rhombic 80° shape affect cutting performance? The Rhombic 80° geometry gives a robust cutting edge that tolerates higher radial forces and interrupted cuts, improving process stability and enabling secure edge positioning in a range of turning and boring setups. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and reduces the likelihood of chipping when machining hard materials, helping to preserve surface integrity and extend the usable life of the insert. Is this insert compatible with standard toolholders for CCGW-style inserts? The insert follows the CCGW designation and is compatible with toolholders designed for that family; for confirmation of holder fitment and clamping specifications refer to tooling documentation or consult Metav Werkzeuge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer Walter Tools.
CCGW09T308TM-2 WBH20C Wendeplatten - Walter Tools
Benefit from the combination of CBN-grade wear resistance and a robust Rhombic 80° seating that keeps hard-turning operations consistent and productive; the compact geometry and 0.8 mm corner radius support longer tool life and stable cutting. Order the CCGW09T308TM-2 WBH20C directly via Metav Werkzeuge or ask our consultants if needed. CCGW09T308TM-2 WBH20C – Turning insert for hard machining | Walter Tools The CCGW09T308TM-2 WBH20C is a CBN turning insert designed for hard machining of hardened steels, delivering high wear resistance and process stability in demanding finishing and light roughing applications CBN grade for extreme wear resistance Designed for hardened steels (H) Rhombic 80° form for secure seating 0.8 mm corner radius for robust edge Reliable cutting performance for hardened materials The insert is manufactured in a CBN class cutting material that is specifically engineered for machining hardened steels and pre-hardened workpieces. This composition gives a significantly higher wear resistance compared with conventional carbide grades, which translates directly into longer tool life and fewer indexings. In practical terms, the hardened-cutting capability reduces unscheduled tool changes and supports a predictable production rhythm, making the grade particularly suitable where repeatable results and minimal downtime are required. Geometry tuned for stability and surface quality The Rhombic 80° form combined with a 7° clearance and a 0.8 mm corner radius creates a secure seat in the toolholder and a resilient cutting edge under elevated cutting forces. The defined geometry helps to maintain a stable chip flow and reduces vibration during the cut, which improves surface finish and protects the cutting edge. The T3 plate thickness contributes to mechanical rigidity, ensuring that the insert withstands the stresses of hard turning without premature deformation. Application benefits: productivity and process security Because the grade is optimised for hard materials, the insert supports higher material removal rates in applications where abrasive wear would quickly blunt other grades. The design and grade combination promote consistent cutting conditions, which enhances productivity and process security in serial production. For workshop planners and process engineers, this means more predictable tool life, reduced inventory for spare inserts and an easier route to stable cycle times on challenging components. Practical handling and integration into existing tooling The insert’s ISO designation and standard form allow straightforward mounting in compatible turning toolholders, simplifying tool management in mixed fleets. The integrated chipbreaker supports controlled chip formation for common hard-turning conditions, while the stable edge geometry reduces the need for frequent operator adjustments. For customers requiring further clarification on holder compatibility or cutting-data recommendations, technical support and application advice are available to assist with selection and process set-up. For workshops seeking a reliable CBN solution for hard turning, consider the Walter Tools WBH20C insert and contact Metav Werkzeuge for detailed application advice or to request procurement assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCGW09T308TM-2-WBH20C-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGW09T308TM-2 WBH20C Walter Tools Series: Walter CBN / Hartstoff Facts Plate size: 09 Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate thickness: T3 Tolerance class: G Special features Grade: WBH20C (coated CBN) Application: hardened steels (H), hard machining Chipbreaker: 2 Execution: W ISO designation: CCGW09T308TM-2 WBH20C FAQ Is this insert suitable for finishing hardened steels? The CCGW09T308TM-2 WBH20C insert by Walter Tools is specifically designed for hard machining and is well suited to finishing operations on hardened steels, thanks to its CBN composition and stable geometry. Which workpiece materials are recommended for this grade? The WBH20C grade is intended for hardened steels and pre-hardened materials where high abrasion resistance and cutting-edge stability are required. Can the insert be used with standard turning holders? Yes, the ISO form and Rhombic 80° shape of the insert allow use in compatible standard turning toolholders; correct clamping to the holder is important for achieving the quoted process stability. What benefits does the 0.8 mm corner radius deliver? A 0.8 mm corner radius increases edge robustness under heavy cutting loads and contributes to improved surface finish and longer tool life in hard-turning tasks. How does the chipbreaker influence performance on hard materials? The specified chipbreaker supports controlled chip formation in hard-cutting scenarios, helping to avoid long, unstable chips and improving process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
CCGW09T308TM-2 WBH30 Wendeplatten - Walter Tools
Benefit from the wear resistance of the WBH30 CBN grade combined with a stable rhombic 80° geometry and a 0.8 mm corner radius for reliable hard‑turning. Order the insert directly via Metav Werkzeuge or contact our consultants for machining recommendations. CCGW09T308TM-2 WBH30 rhombic 80° CBN insert for hard turning — Walter Tools The CCGW09T308TM-2 WBH30 is a rhombic CBN insert engineered for heavy‑duty turning and boring of hardened steels, delivering stable chip control and long tool life. CBN grade WBH30 for hard materials Rhombic 80° geometry 7° clearance for stable cutting 0.8 mm corner radius for edge strength Durable performance for hardened steel machining The CBN cutting compound of this insert provides exceptional wear resistance, making it ideal for repeated operations on hardened steels. By using a cubic boron nitride grade tailored for hard‑turning, the insert reduces flank wear and maintains a consistent cutting edge over extended cycles. This results in fewer tool changes and more predictable cycle times, which supports higher process reliability in serial production. Geometry designed to withstand heavy cuts The rhombic 80° shape and 0.8 mm corner radius combine to deliver a robust cutting edge that resists chipping under elevated radial and tangential forces. The 7° clearance angle improves chip flow and reduces rubbing on the flank, which helps preserve surface integrity on the workpiece. Together, these geometric choices enable stable machining of hard materials while maintaining a competitive surface finish. Improved productivity through longer tool life Using a CBN insert from the Walter CBN series reduces downtime associated with frequent insert changes and rework. The WBH30 composition is optimised for abrasive, high‑hardness environments; this increases cumulative cutting performance and lowers cost per component. For operations where repeatability and uptime are critical, the combination of coated CBN grade and proven insert geometry provides a measurable productivity advantage. Application guidance and material compatibility This insert is intended for hard machining tasks and is suitable for materials classified under ISO group H, notably hardened steels and pre‑hardened workpieces. The Walter CBN / Hartstoff series is formulated for challenging abrasion and maintains edge stability during intermittent or continuous cuts. When integrating this insert into a process, select appropriate cutting parameters and coolant strategies for CBN tooling to exploit the full benefit of the grade and geometry. For demanding hard‑turning applications, choose the Walter Tools CCGW09T308TM-2 WBH30 and contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting data and supply options. Technical data Article number: CCGW09T308TM-2-WBH30-WALTER Designation: CCGW09T308TM-2 WBH30 Brand: Walter Tools Series: Walter CBN / Hartstoff Core data Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Chipbreaker: 2 Tolerance class: G Features and applications CBN grade WBH30 Execution: W Suitable for hardened steels (ISO H) Suitable for pre‑hardened steel applications Designed for hard turning and abrasive workpiece materials FAQ What materials is this insert best suited for? The insert is intended for hard‑turning and is suitable for materials in ISO group H, particularly hardened steels and pre‑hardened workpieces; the WBH30 CBN grade is optimised for such applications. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius increases edge strength and improves resistance to chipping during heavy cuts, which helps maintain dimensional stability and surface quality over longer tool life. Is the geometry suitable for finishing passes? The rhombic 80° form with a moderate corner radius provides a balance between robust cutting for semi‑finishing and the potential for achieving good surface finish when cutting parameters are adapted. What does the tolerance class G indicate? Tolerance class G specifies the manufacturing tolerance for the insert geometry; this influences fit and repeatability in insert seats and supports consistent performance across batches for the CCGW09T308TM-2 WBH30 insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only; no connection between our company and the named brands is implied. The offered item is original, factory‑new merchandise from the manufacturer Walter Tools.
CCGW09T308TM-MW2 WBH10C WBH10C Wendeplatten - Walter Tools
Take advantage of the combination of a CBN grade optimised for hard turning, a stable rhombic geometry and precise chip control for dependable performance in hardened-steel machining; order directly via Metav Werkzeuge or consult our application experts for process parameters and availability CCGW09T308TM-MW2 WBH10C - Rhombic 80° CBN turning insert for hardened steel (Walter Tools) The CCGW09T308TM-MW2 WBH10C is an indexable turning insert designed for hard machining tasks, offering a coated CBN grade for high wear resistance and consistent performance in hardened-steel applications Coated CBN for hard turning Rhombic 80° geometry for versatility 0.8 mm corner radius for edge stability 7° clearance angle for reliable cutting Consistent wear resistance for demanding hard turning The WBH10C grade is a coated CBN cutting material developed to withstand the high temperatures and abrasive conditions typical of hardened-steel machining. As a result, the insert delivers extended tool life and reduced flank wear compared with conventional carbide solutions when applied correctly. CBN (cubic boron nitride) is a superabrasive optimised for permanent hardness and thermal stability; this means the insert maintains cutting-edge geometry under heavy contact stresses, which translates into fewer tool changes and more predictable machining cycles for production environments Geometry and chip control that improve surface quality With a rhombic 80° shape and a 0.8 mm corner radius, this insert combines edge strength with flexible approach angles to achieve consistent surface finish and dimensional stability. The integrated MW2 chipbreaker promotes reliable chip formation during interrupted cuts and finishing passes, reducing the risk of built-up edge and improving swarf evacuation. The modest 7° clearance ensures a controlled cutting engagement and lowers rubbing at the flank, resulting in stable forces and reproducible part quality in serial production Practical advantages for workshop integration and application The insert's T3 plate thickness and tolerance class G offer mechanical robustness and repeatable seating in standard toolholders, supporting process security across shifts. Designed for machining hardened steels and pre-hardened materials, it is suitable for hard turning operations where wear resistance and edge life are critical. Use of a CBN grade minimises thermal deformation of the cutting edge and often enables higher cutting speeds or longer cycles between indexings, improving throughput and cost-efficiency for medium to high-volume production Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools CCGW09T308TM-MW2 WBH10C insert Technical Data Article number: CCGW09T308TM-MW2-WBH10C-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGW09T308TM-MW2 WBH10C Walter Tools Series: Walter CBN / Hartstoff Grade: WBH10C Core specifications Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Rhombus 80° Insert size: 09 Thickness: T3 Tolerance class: G Applications & features Coating / material: Coated CBN Chipbreaker: MW2 Execution: W Suitable for: hardened steels (H) Suitable for: pre-hardened steel Applicable processes: hard turning FAQ What materials is this insert suitable for? This insert is specified for machining hardened steels and is suitable for pre-hardened steel applications, using the WBH10C CBN grade to control wear during hard turning How does a CBN grade compare with carbide for hard machining? Coated CBN, as used in this insert, offers superior thermal and abrasive resistance compared with carbide in hardened materials, resulting in longer edge life and more consistent dimensional output when machining hard workpieces What does the MW2 chipbreaker achieve in practice? The MW2 chipbreaker supports controlled chip formation and improved evacuation, reducing the risk of built-up edge and helping to maintain a consistent surface finish during interrupted or continuous hard-turning operations Which toolholders fit this insert form and size? The rhombic 80° form and size 09 are compatible with standard indexable turning holders designed for CCGW-style inserts; selection of the correct holder and clamping torque ensures the T3 thickness and tolerance class G provide repeatable seating How should cutting data be adjusted for this insert? Cutting parameters depend on the workpiece hardness and machine rigidity; start with manufacturer-recommended speeds for CBN in hardened steels and favour stable feeds and depths of cut to exploit the insert’s wear resistance and process stability Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods supplied by the manufacturer.
CCGW09T308TS-2 WBK20 Wendeplatten - Walter Tools
Take advantage of the combination of longer tool life, stable cutting performance and catalogue-dependent material options to improve productivity in hard-turning applications; order the insert directly via Metav Werkzeuge or consult the team for specification support. CCGW09T308TS-2 WBK20 — Rhombic 80° CBN turning insert by Walter Tools (CBN grade, 7° clearance) CCGW09T308TS-2 WBK20 is a precision CBN turning insert designed for high‑wear and hard‑turning tasks, offering a robust geometry for demanding steel and superalloy machining. CBN grade for hardened materials Rhombic 80° geometry for versatile turning 7° clearance for stable cutting Increased process efficiency for hardened workpieces The combination of CBN cutting material and the WBK20 grade targets high‑wear environments where consistent edge life matters. CBN inserts resist abrasive wear in applications such as hardened steels and certain superalloys, which leads to fewer tool changes and a more predictable production rhythm. The insert’s hard substrate and coated or uncoated variants (catalogue‑dependent) allow for higher cutting speeds and a reduced total cost of machining when compared with conventional carbide solutions in similar tasks. Geometry engineered for stability and surface quality The rhombic 80° form paired with a 0.8 mm corner radius provides a balanced contact area that supports both corrective turning and finishing passes. A 7° clearance angle promotes positive rake behaviour and reduces rubbing on the workpiece, translating into improved surface finish and lower thermal loading of the cutting edge. Where dimensional control is critical, this geometry helps to maintain repeatable cutting conditions and lessens the likelihood of chatter in stable set‑ups. Application guidance and safe selection This insert is supplied in the CCGW09T308TS-2 WBK20 specification and is best considered for operations on hardened steels and materials with high abrasive tendencies; however, final suitability should be verified against the manufacturer’s product matrix. The chipbreaker 2 configuration supports controlled chip formation in interrupted or continuous turning, improving evacuations in automated or semi‑automated machining. For specific cutting data and to match the insert to the machine and workpiece, consult the technical data sheets or request assistance from Metav Werkzeuge. Practical benefits for production planners Adopting a CBN insert such as this one can shorten cycle times through higher permissible cutting speeds and reduce tooling logistics by extending tool life. The T3 thickness and standard plate size 09 make the insert compatible with a wide range of common tool holders, simplifying inventory. In practice, shops report greater process stability and fewer unexpected stoppages when switching to a purpose‑designed CBN grade for hard‑turning tasks. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools CCGW09T308TS-2 WBK20 into the process, request cutting data or order directly via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: CCGW09T308TS-2-WBK20-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Grade: WBK20 Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Chipbreaker: 2 Tolerance class: G Material specification: Catalogue-dependent Special features CBN cutting material for hard and high-wear machining Suited for hardened steels and, depending on matrix, certain cast materials or superalloys Designed for stable cutting and consistent edge life Standard form for versatile turning operations FAQ What materials is this CBN insert suitable for? The CCGW09T308TS-2 WBK20 insert is specified for hardened steels and other high‑wear materials; suitability for cast components or superalloys should be confirmed using the Walter Tools product matrix. How does the rhombic 80° shape affect machining? The rhombic 80° geometry offers flexible approach angles for turning, enabling both roughing and finishing with reliable chip control when combined with the built‑in chipbreaker. What advantages does the WBK20 grade offer? The WBK20 CBN grade provides enhanced wear resistance and dimensional stability in prolonged turning operations, which reduces tool change frequency and improves process predictability. Is the insert compatible with common tool holders? Yes, the size 09 and T3 thickness conform to widely used tool holder standards, facilitating quick integration into existing tool systems. Where to find cutting data for this insert? Cutting parameters and application recommendations are available from the manufacturer’s technical documentation and from Metav Werkzeuge; consult the product matrix before machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGW120404FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, precise geometry and reliable performance for consistent machining of abrasive non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult the technical advisors if application data is required CCGW120404FS-1 WDN10 — PKD Turning Insert, Rhombic 80° by Walter Tools CCGW120404FS-1 WDN10 is a polycrystalline‑diamond turning insert designed for high‑wear applications on abrasive, non‑ferrous materials PKD grade WDN10 for abrasive non‑ferrous materials Rhombic 80° geometry for flexible turning strategies 7° clearance angle for stable cutting action 0.4 mm corner radius for improved surface finish High wear resistance for abrasive non‑ferrous machining The polycrystalline diamond (PKD) composition of this insert delivers outstanding wear resistance when machining abrasive, non‑ferrous materials. The PKD grade WDN10 is engineered to withstand high abrasive loads, which translates into longer intervals between tool changes and more predictable tool life. For production environments where consistent component quality and reduced downtime are priorities, the insert’s hard compound reduces flank and crater wear, helping to maintain dimensional accuracy over extended runs. Suitability for specific alloys should be verified against the product matrix to ensure optimal results. Geometry engineered for reliable finishes and process stability A combination of the rhombic 80° geometry and the 0.4 mm corner radius supports both turning versatility and fine surface quality. The 7° clearance angle provides positive cutting engagement while limiting rubbing on the flank, which helps to preserve the cutting edge and reduce built‑up edge formation. The integrated chipbreaker 1 is tailored for controlled chip formation in non‑ferrous, abrasive conditions, promoting steady material evacuation and stable cutting forces. These geometric features together support predictable machining and repeatable part quality in CNC turning operations. Practical integration and economic benefits in production Designed as a straightforward replacement insert for compatible toolholders, the insert belongs to the Walter Schneidstoffsorte series and is supplied under the designation CCGW120404FS‑1 WDN10. The PKD grade reduces tool consumption for challenging materials, which can improve cost per part in high‑volume applications. In mixed‑material production or in workpieces containing abrasive inclusions, the insert’s wear properties contribute to fewer unexpected tool failures and reduced scrap rates, supporting continuous production and operational efficiency. For specific process parameters and to confirm compatibility with the chosen workpiece material, technical advice is available on request Choose the Walter Tools PKD insert for robust performance in abrasive non‑ferrous turning and contact Metav Werkzeuge for application guidance and availability Technical data Article number: CCGW120404FS-1-WDN10-WALTER Designation: CCGW120404FS-1 WDN10 Manufacturer: Walter Tools Product type: Turning/cutting insert Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Style: W Facts Geometry: Rhombic 80° Clearance angle: 7° Corner radius: 0.4 mm Plate size: 12 Plate thickness code: 04 Chipbreaker: 1 Tolerance class: G Special features PKD (polycrystalline diamond) cutting material Suitable for abrasive, non‑ferrous materials (check matrix) Designation without grade: CCGW120404FS-1 WDN10 is a PKD grade optimised for wear resistance FAQ What materials is this insert optimised for? The CCGW120404FS‑1 WDN10 insert is optimised for abrasive, non‑ferrous materials; the PKD grade WDN10 offers high wear resistance for such applications. Can the insert be used for finishing and roughing operations? Yes, the rhombic 80° geometry combined with a 0.4 mm corner radius enables both controlled finishing and robust roughing in suitable non‑ferrous workpieces when parameters are adapted. How does the 7° clearance angle affect cutting performance? The 7° clearance angle reduces flank contact and helps maintain a stable cutting edge, which supports consistent surface quality and extended tool life for the Walter Tools insert. Is the chip formation controlled for automated machining? The integrated chipbreaker 1 is designed to produce predictable chips in abrasive non‑ferrous machining, aiding evacuation and process stability during CNC turning. How should suitability for a specific alloy be verified? Suitability for a particular alloy should be checked against the product matrix and process data; the CCGW120404FS‑1 WDN10 benefits from PKD properties but requires parameter adaptation for best results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
CCGW120408FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
High wear resistance and precise geometry combine to deliver efficient, repeatable machining of abrasive non‑ferrous materials; the polycrystalline diamond grade WDN10 paired with a 0.8 mm corner radius and 7° clearance supports long tool life and stable chip control. Order the CCGW120408FS-1 WDN10 indexable insert directly via Metav Werkzeuge or ask the consultants for application advice. CCGW120408FS-1 WDN10 indexable insert for abrasive non‑ferrous machining | Walter Tools The CCGW120408FS-1 WDN10 is an indexable turning and boring insert engineered for productive machining of abrasive non‑ferrous metals and other abrasive, non‑ferrous materials. PKD grade WDN10 for abrasive non‑ferrous materials Rhombus 80° geometry for versatile turning 0.8 mm corner radius for consistent edge strength 7° clearance angle for reliable chip control Improved productivity through a wear‑resistant cutting grade The combination of polycrystalline diamond (PKD) in grade WDN10 and robust geometry delivers measurable gains in tool life when tackling abrasive non‑ferrous materials. PKD is especially resistant to abrasive wear, which translates into fewer index changes and longer uninterrupted run times on production lathes and turning centres. The design prioritises cutting stability and consistent surface finish, so shops processing abrasive aluminium alloys, graphite or other non‑ferrous substrates can expect reduced rework and improved throughput. These technical advantages create a clear cost‑benefit for high‑volume and precision applications. Geometry and edge design that support consistent results The Rhombus 80° form, combined with a 0.8 mm corner radius and 7° clearance, offers a balance between strength and accessibility to typical profiles. The modest corner radius helps maintain a durable cutting edge while supporting repeatable dimensional control on facing and light profiling operations. Chipbreaker 1 is tuned to promote predictable chip formation with the intended material class, reducing the risk of chip entanglement and improving coolant access. Together, these features enable reliable machining with fewer interruptions and consistent part quality across batches. Application guidance and integration into production As an indexable insert optimised for abrasive non‑ferrous work, the insert suits a range of CNC turning and boring setups where PKD grades are indicated. The CCGW form and the insert’s thickness provide stability in standard toolholders designed for rhombic inserts. Selection should follow the machine, workpiece and process matrix for cutting speeds, feeds and coolant strategy; the PKD grade is not intended for ferrous materials. For shops seeking to standardise inserts across multiple cells, this grade offers a predictable wear pattern and good repeatability in series production. Contact Metav Werkzeuge for application recommendations and to secure CCGW120408FS-1 WDN10 from Walter Tools; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: CCGW120408FS-1-WDN10-WALTER ISO designation: CCGW120408FS-1 WDN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Core specifications Inscribed circle: 12 mm Thickness: 4 mm Corner radius: 0.8 mm Clearance angle: 7° Geometry: Rhombus 80° Chipbreaker: 1 Materials & features Grade: polycrystalline diamond (PKD), WDN10 Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G Execution: W Material information: catalogue‑dependent FAQ Is this insert suitable for aluminium and other non‑ferrous alloys? Yes. The CCGW120408FS-1 WDN10 features a PKD grade formulated for abrasive non‑ferrous metals and related materials, offering enhanced wear resistance during long runs. Can the insert be used on steel or cast iron? No. The PKD composition of this insert is intended for non‑ferrous and abrasive non‑ferrous substrates; steel and cast iron are not suitable for this grade. Which toolholders are compatible with this insert geometry? Standard holders that accept CCGW‑form rhombic inserts and support a Rhombus 80° mounting will be compatible; ensure the holder matches the 12 mm inscribed circle and thickness specifications. How does the 0.8 mm corner radius affect finish and strength? The 0.8 mm radius balances edge strength and surface finish, improving resistance to chipping while maintaining good dimensional control on common turning operations. What advantages does the WDN10 grade provide in production? WDN10 delivers long life on abrasive non‑ferrous materials, consistent edge performance and predictable wear, supporting higher uptime and lower insert consumption in repetitive machining tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of an established group of precision tool manufacturers and focuses on robust cutting solutions. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the long-lasting Tiger‑tec Gold coating and the balanced WPP20G grade for dependable steel machining; the compact 0.2 mm corner radius and 80° rhombic geometry deliver stable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our advisors for cutting data and holder compatibility. CCMT060202-E47 WPP20G drilling/reaming indexable insert for steel — Walter Tools CCMT060202-E47 WPP20G is a drilling and bore‑enlarging indexable insert designed for efficient holemaking in a wide range of steels Tiger‑tec Gold coating for long life Optimised for steel ISO P applications 80° rhombic shape for flexible indexing 0.2 mm corner radius for precise cutting Optimised coating and grade for reliable productivity The combination of the Tiger‑tec Gold technology and the WPP20G grade creates a balanced, coated‑carbide solution tailored to the thermal loads and chip forms typical of steel machining. This coating strategy enhances wear resistance, reduces flank wear progression and ensures a predictable tool life. The integrated chipbreaker E47 supports continuous chip control during hole enlargement, reducing the risk of clogging and enabling stable feeds and spindle speeds. For production environments seeking repeatable cycle times, these properties translate directly into lower tooling costs per part and fewer unscheduled tool changes. Geometry that improves hole quality and process stability The 80° rhombic plate form and a 0.2 mm corner radius provide a geometry that resists edge chipping while delivering a consistent cutting line on bore walls. The 7° clearance angle reduces rubbing and heat at the cutting edge, improving surface finish and dimensional consistency in consecutive holes. These features support both semi‑finishing and finishing passes, where geometric stability is essential to meet tolerance and roundness requirements. Explained simply: smaller corner radii give sharper engagement for accuracy, while the rhombic shape allows multiple effective index positions to extend insert life. Predictable integration into existing tool systems With a standard designation of CCMT060202‑E47, this insert matches common mounting and clamping systems used in drilling and reaming toolholders. The tolerance class M ensures consistent interchangeability between inserts, reducing setup time and minimising the need for special adjustments. As a coated cemented‑carbide grade, it fits routine workshop processes without requiring unusual coolant strategies; conventional flood or through‑tool coolant practices remain effective. The net effect is straightforward: faster tool changes, stable process parameters and improved overall equipment effectiveness. Broad suitability for steel applications and recommended uses The material code indicates primary suitability for steel (ISO group P). The WPP20G grade is positioned as a universal solution that balances resistance to abrasive wear with adequate toughness for a range of steel grades, from softer low‑alloy steels to tougher, more work‑hardening materials. Use this insert for hole enlargement, spot boring and other holemaking operations where a combination of chip control and edge stability matters. When selecting feeds and speeds, prioritise consistent chip evacuation and modest depth per pass to exploit the insert’s balanced performance. Contact Metav Werkzeuge for application‑specific cutting data, holder compatibility and immediate availability of the Walter Tools CCMT060202-E47 WPP20G insert for steel machining Technical Data Article number: CCMT060202-E47-WPP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte CCMT060202-E47 WPP20G Manufacturer: Walter Tools Product type: drilling/reaming indexable insert Facts Free angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: E47 Material application: steel (ISO P) Coated carbide construction FAQ Is this insert suitable for all steel grades? The CCMT060202‑E47 WPP20G insert is formulated for steel (ISO P) and offers a universal balance of wear resistance and toughness, making it suitable for a wide range of common steel grades. How does the Tiger‑tec Gold series affect tool life? The Tiger‑tec Gold coating enhances wear resistance and thermal stability on the cutting edge, which extends the service life of the insert under typical steel machining conditions. Can the insert be indexed multiple times for extended life? Yes, the 80° rhombic shape provides several index positions, allowing repeated use of fresh cutting edges and improving overall productivity. What does the chipbreaker E47 provide in holemaking? The E47 chipbreaker is designed to promote stable chip formation and evacuation during bore enlargement, reducing the risk of clogging and improving surface finish in the hole. Does tolerance class M impact interchangeability? Tolerance class M indicates a medium tolerance level that supports consistent fit and interchangeability across standard toolholders without custom adaptation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-E47 WPP20S WPP20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated carbide grade and a compact Rhombic 80° geometry delivers reliable chip control and extended tool life in steel machining; expect consistent results and efficient tool changeover. Order the CCMT060202-E47 WPP20S insert directly via Metav Werkzeuge or contact the consultancy team for cutting data and availability. CCMT060202-E47 WPP20S Drill/Bore Indexable Insert, coated carbide for steel – Walter Tools The CCMT060202-E47 WPP20S is a coated carbide indexable insert for drilling and boring applications, optimised for machining steels according to ISO group P. Tiger·tec Silver coated carbide Optimised for steel machining 0.2 mm corner radius for accuracy Rhombic 80° form with 7° clearance Durable coated grade for demanding steel operations The insert features the Tiger·tec Silver coating on a wear-resistant carbide substrate, designed to improve tool life and stability under the thermal and mechanical loads typical when cutting steel. The coating technology aids in stable chip formation and reduces flank wear, which translates into fewer tool changes and longer uninterrupted production runs. Engineers and production planners will value the predictable performance under continuous operation, while workshop supervisors benefit from lower tool consumption and more consistent component quality. Geometry that promotes secure cutting and chip control The Rhombic 80° shape combined with a 0.2 mm corner radius and 7° clearance angle gives a balance between entry strength and cutting-edge adaptability. The E47 chipbreaker is tuned for effective chip segmentation in steel, improving evacuation during both drilling and bore-enlargement passes. These geometric choices reduce the risk of built-up edge and support repeatable surface finish, making the insert suitable for a range of machining tasks where reliable chip control and repeatability are required. Practical advantages in production environments As a member of the Tiger·tec Silver series and the WPP20S grade, this insert is intended for universal steel applications and supports productive machining strategies. The compact size and standard CCMT designation simplify inventory and toolholder selection, while the coated grade helps maintain cutting-edge integrity at higher cutting speeds. For job shops and production lines alike, the result is improved throughput and more consistent part-to-part quality, enabling efficient process planning and reduced secondary operations. Contact Metav Werkzeuge today for tailored cutting data, stock information and expert recommendations on the Walter Tools CCMT060202-E47 WPP20S insert Technical Data Article number: CCMT060202-E47-WPP20S-WALTER Designation: CCMT060202-E47 WPP20S Label: Bohr-/Aufbohrwendeschneidplatte CCMT060202-E47 WPP20S Walter Tools Manufacturer: Walter Tools Core Data Free angle: 7° Corner radius: 0.2 mm Plate form: Rhombic 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WPP20S (coated carbide) Chipbreaker: E47 Material group suitability: Steel (ISO group P) Execution: T FAQ Which materials is this insert intended for? The CCMT060202-E47 WPP20S insert is designed primarily for steel machining (ISO group P) and its grade and chipbreaker are matched to the cutting behaviour of unalloyed and alloyed steels. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this Walter Tools insert improves wear resistance and thermal stability, resulting in longer tool life and more consistent cutting performance under steel machining conditions. How does the 80° rhombic form affect machining? The Rhombic 80° geometry offers a robust cutting edge for drilling and boring tasks, allowing secure insert seating and good access to bore walls while maintaining cutting stability. Is the E47 chipbreaker suitable for finishing passes? The E47 chipbreaker is engineered for effective chip control in steel; it supports stable machining and can deliver consistent surface quality, depending on cutting parameters and machine rigidity. Which operations and machines are best suited to this insert? This indexable insert is suitable for drilling and bore-enlargement operations on machining centres and dedicated drilling/boring units where the cutter geometry and grade match the machine’s rigidity and the workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for clarification only; there is no affiliation between our company and the trademark owners.
CCMT060202-E47 WSM20S T Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WSM20S grade, this insert delivers stable cutting edges and controlled chip formation for machining stainless steel and high‑temperature alloys; the 7° clearance and 0.2 mm nose radius contribute to consistent surface quality and reproducible tool life. Order the Walter Tools insert directly via Metav Werkzeuge or consult our specialists for cutting data and application matching. CCMT060202-E47 WSM20S Rhombic 80° indexable insert for stainless steel and superalloys — Walter Tools The CCMT060202-E47 WSM20S is a rhombic 80° turning and boring indexable insert designed for demanding operations on stainless steel and heat‑resistant superalloys, offering a combination of coating, edge geometry and chip control for reliable production runs. Tiger‑tec Silver coated carbide grade WSM20S Rhombic 80° geometry for stable cutting 7° clearance angle for reduced rubbing 0.2 mm nose radius for consistent surface finish Stable edge performance for tough-to-cut alloys The combination of the Tiger‑tec Silver coating and the WSM20S carbide grade is optimised for materials that generate heat and strain the cutting edge. For stainless steel and nickel‑base superalloys, the coating improves thermal resistance while the grade promotes stable chip formation, reducing the risk of built‑up edge and premature wear. In production contexts this translates into longer tool life and fewer interruptions for tool changes, supporting higher overall equipment effectiveness and predictable cycle times. Geometry engineered for repeatable surface quality The rhombic 80° form factor and a 0.2 mm nose radius balance robustness and finish capability. The smaller nose radius helps to maintain dimensional control on fine turning passes, while the insert shape provides a secure seating and chip flow path in compatible toolholders. Paired with the E47 chipbreaker, this geometry enables consistent chip segmentation and evacuation, which lowers rework rates and simplifies downstream handling of swarf in automated setups. Coating and material pairing to increase productivity A coated cemented carbide base benefits operations on materials with poor thermal conductivity by protecting the cutting edge against high temperatures and adhesive wear. The WSM20S grade within the Tiger‑tec Silver family has been selected for its heat resistance and edge integrity, supporting tougher machining parameters when compared with uncoated grades. The result is improved process security and the opportunity to raise cutting data where machine and setup permit, yielding measurable productivity gains per shift. Integration and process advice for machining shops This indexable insert suits medium to advanced turning and boring applications where reproducibility is required. The insert’s 7° clearance angle reduces flank rubbing and helps preserve surface integrity on interrupted cuts. In application planning, match the insert to a suitable toolholder for rhombic 80° plates and verify clamping stability; modest increases in feed or depth-of-cut are often possible once initial trials confirm thermal and vibration behaviour. For controlled series production the insert supports consistent quality with fewer tool swaps, enhancing throughput and reducing process variability. Contact Metav Werkzeuge for tailored cutting data and to discuss how Walter Tools CCMT060202-E47 WSM20S inserts can be integrated into existing toolchains; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT060202-E47-WSM20S-WALTER SKU: CCMT060202-E47-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte CCMT060202-E47 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade / Sort: WSM20S Key dimensions Clearance angle: 7° Nose radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Special features and suitability Chipbreaker: E47 Coating technology: Tiger‑tec Silver Material suitability: S / M (superalloys and stainless steel) Execution: T Tolerance class: M Intended use: Turning / boring indexable insert FAQ Which materials are recommended for this insert? The CCMT060202-E47 WSM20S insert from Walter Tools is recommended for stainless steel and heat‑resistant superalloys (ISO groups M and S), with the grade engineered to support secure chip formation and thermal stability. What are the key geometric specifications to consider? The insert features a rhombic 80° shape, a 7° clearance angle and a 0.2 mm nose radius; these dimensions influence seat selection, surface finish and allowable feed ranges for turning and boring operations. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver coating enhances thermal resistance and wear protection on the carbide substrate, enabling more consistent tool life when machining materials that generate high cutting temperatures. Is the CCMT060202-E47 suitable for interrupted cuts? Yes, the rhombic 80° geometry and the robustness of the WSM20S grade make the insert suitable for many interrupted cutting scenarios, provided the toolholder and clamping are sufficiently rigid. What chip control can be expected with E47 chipbreaker? The E47 chipbreaker is designed for segmented chip formation in medium to heavy feeds, assisting evacuation and reducing the risk of long, stringy chips during turning of stainless steel and superalloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Tel: not specified Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-E47 WSM30S WSM30S Wendeplatten - Walter Tools
The Tiger·tec Silver coating combined with the WSM30S grade delivers thermal resilience and stable cutting edges for machining rostfreier Stahl and heat-resistant alloys; the CCMT rhombic form with a 7° clearance and 0.2 mm corner radius supports consistent surface quality and predictable tool life. Order the insert via Metav Werkzeuge or consult the technical team for process optimisation. CCMT060202-E47 WSM30S — drilling/bore-up indexable insert, Tiger·tec Silver (Walter Tools) The CCMT060202-E47 WSM30S is a rhombic 80° indexable insert optimised for demanding drilling and bore-enlargement applications, especially when machining rostfreier Stahl and high-temperature superalloys. Tiger·tec Silver coating for thermal resistance WSM30S grade for rostfreier Stahl and superalloys Rhombic 80° CCMT form for versatile indexing 7° clearance and 0.2 mm corner radius Consistent cutting performance under heat and strain The combination of the Tiger·tec Silver coating and the WSM30S carbide grade is engineered to resist the thermal loads typical of machining rostfreier Stahl and group S alloys. The coating reduces adhesion and improves heat dissipation at the cutting edge, which in turn supports a stable cutting edge and extended tool life. For production environments this means fewer interruptions and more predictable cycle times; the result is a measurable improvement in process reliability without compromising component integrity. Reliable chip control and surface integrity The E47 chipbreaker is designed to produce short, controllable chips during interrupted cuts and deep bore passes, reducing the risk of chip entanglement and tool damage. Combined with the CCMT rhombic 80° form and a 0.2 mm corner radius, the geometry promotes a balanced distribution of cutting forces and a fine surface finish. The 7° clearance minimises rubbing and heat build-up behind the cutting edge, translating into reduced vibration and improved dimensional consistency for each operation. Practical benefits for workshop and production use As an indexable insert, this grade and geometry allow rapid re-indexing and straightforward inventory management: one body can provide multiple fresh cutting edges, cutting downtime and maintenance effort. The insert size (06) and thickness (02) suit a wide range of toolholders compatible with Walter Tools systems, enabling a smooth transition into existing tool sets. For specific machining strategies or mixed-material production, Metav Werkzeuge’s technical advisors can support selection of cutting parameters and holder compatibility to achieve optimal outcomes. For further technical data or process support, contact info@metav-werkzeuge.com or call +49 2822 7131930. For applications in rostfreier Stahl and high-temperature alloys, request Walter Tools’ Tiger·tec Silver WSM30S from Metav Werkzeuge for proven process security — contact Metav Werkzeuge for tailored advice and availability. Technical data SKU: CCMT060202-E47-WSM30S-WALTER Article designation: CCMT060202-E47 WSM30S Product type: drilling/bore-up indexable insert Brand: Walter Tools Facts Insert form: Rhombus 80° (CCMT) Clearance angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness: 02 Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: E47 Material application: rostfreier Stahl and heat-resistant superalloys (group S) Series: Tiger‑tec Silver FAQ Which materials is this insert suitable for? The insert is intended for machining rostfreier Stahl and heat-resistant superalloys; the WSM30S grade is optimised for such demanding materials. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal resistance and reduces adhesion at the cutting edge, improving the WSM30S insert’s wear behaviour under high temperatures. How does the E47 chipbreaker affect machining? The E47 chipbreaker promotes short, controllable chips for safer bore passes and interrupted cuts, helping to protect the tool and workpiece. Is the CCMT form compatible with standard toolholders? The CCMT rhombic 80° geometry is a common indexable form; the CCMT060202-E47 WSM30S insert fits holders designed for CCMT inserts of the corresponding size. What performance improvements can be expected in production? Users can expect improved process stability, longer edge life and more consistent surface quality when using the WSM30S grade with appropriate parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP20G carbide grade for stable, long-lasting performance when machining rostfreier Stahl; the FM4 chipbreaker and a 0.2 mm nose radius support consistent surface quality and predictable chip formation. Order the CCMT060202-FM4 WMP20G insert directly via Metav Werkzeuge or ask our consultants if application advice is required. CCMT060202-FM4 WMP20G turning insert — rhombic 80° form, Tiger·tec Gold, for rostfreier Stahl — Walter Tools The CCMT060202-FM4 WMP20G is a rhombic 80° turning insert with a Tiger·tec Gold coated carbide grade, engineered for reliable machining of rostfreier Stahl under medium to robust conditions. Tiger·tec Gold coating for extended tool life Optimised FM4 chipbreaker for secure chip control Rhombic 80° form with 0.2 mm nose radius Designed for rostfreier Stahl machining Consistent process security from coating and grade The combination of the Tiger·tec Gold coating and the WMP20G coated carbide offers enhanced resistance to adhesive wear and thermal loading, which translates into process stability during serial production. In practice, the improved coating hardness and optimised substrate chemistry reduce flank wear and minimise the tendency for built-up edge when turning rostfreier Stahl, a material group that typically produces high heat and tenacious chips. This results in longer tool life and fewer insert changes, supporting predictable cycle times and reduced downtime. Predictable chip control and surface quality Thanks to the engineered FM4 chipbreaker and the insert geometry, chip formation is controlled even under challenging cutting conditions. The Rhombic 80° form and 0.2 mm nose radius work together to balance cutting edge strength and finishing capability: small radii help achieve fine surface finishes, while the insert form provides the necessary support for interrupted cuts or heavier cross-sections. Improved chip control reduces manual intervention and contributes to a consistent finish on components made from rostfreier Stahl. Flexible application and mounting benefits The insert size and clearance specifications—featuring a 7° clearance—allow integration into common toolholders for turning operations, enabling easy interchangeability in conventional setups. The coated grade is aimed at medium to robust feed and speed ranges appropriate for rostfreier Stahl machining, offering a mix of wear resistance and edge stability. Choosing this insert helps standardise tooling across a range of applications, lowering inventory complexity while maintaining component quality and throughput. For demanding rostfreier Stahl turning, rely on Walter Tools' Tiger·tec Gold WMP20G grade and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060202-FM4-WMP20G-WALTER Designation: CCMT060202-FM4 WMP20G Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060202-FM4 WMP20G Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 80° Size code: 06 Thickness code: 02 Special features / Versions Series: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM4 Material application: rostfreier Stahl Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The CCMT060202-FM4 WMP20G is specified for machining rostfreier Stahl and performs well under the medium to robust cutting conditions typical for that material group. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the insert promotes controlled chip formation and evacuation, improving productivity and reducing manual chip handling when turning rostfreier Stahl. What surface quality can be expected with this grade? When used with appropriate tooling and cutting parameters, the WMP20G grade helps achieve consistent surface finish thanks to edge stability and the 0.2 mm nose radius. Is the Tiger·tec Gold coating suitable for higher temperatures? Yes; the Tiger·tec Gold coating increases resistance to thermal wear and adhesive build-up, supporting higher cutting temperatures encountered in rostfreier Stahl machining. Can this insert be used in standard CCMT toolholders? The insert conforms to CCMT geometry and Rhombic 80° form, allowing compatibility with standard holders designed for CCMT inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
CCMT060202-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WMP20S grade for stable chip control and extended tool life when machining rostfreier Stahl; order the insert through Metav Werkzeuge or consult their specialists for application guidance. CCMT060202-FM4 WMP20S indexable insert — Walter Tools, Tiger·tec Silver, for rostfreier Stahl, FM4 chipbreaker, 7° relief The CCMT060202-FM4 WMP20S is a rhombic 80° indexable turning and boring insert designed for machining rostfreier Stahl under medium to robust cutting conditions Tiger·tec Silver coating for wear resistance Optimised for rostfreier Stahl machining FM4 chipbreaker for consistent chip control Rhombic 80° form with 0.2 mm corner radius Coating and grade for reliable stainless-steel performance The combination of the Tiger·tec Silver coating and the WMP20S grade provides a durable, coated carbide that supports stable cutting edges in demanding rostfreier Stahl applications. Coated carbides are engineered to reduce adhesion and thermal damage during cutting; the coating acts as a barrier against heat and chemical affinity, which are common causes of built-up edge when working with stainless steels. As a result, the insert helps maintain a consistent surface finish and extends effective tool life, reducing the frequency of index changes in production environments. Geometry and chip control that sustain process stability Engineered geometry is central to cutting performance: the FM4 chipbreaker promotes predictable chip formation and evacuation, while the rhombic 80° shape and 0.2 mm corner radius deliver a balance between edge strength and fine finishing capability. The 7° relief angle reduces rubbing on the flank face, lowering cutting forces and heat generation. Together, these features minimise vibration and support reproducible results on batch or continuous turning tasks, which in turn improves throughput and reduces scrap rates. Practical benefits for workshop productivity The insert’s combination of a robust grade and dedicated chip control translates into tangible production advantages: fewer interruptions for insert changes, improved component consistency, and more stable cutting parameters across varying rostfreier Stahl grades. The design supports medium to heavy duty operations without sacrificing surface quality, making the insert suitable for both general turning and light finishing passes. This contributes to higher overall equipment effectiveness and predictable machining cycles in industrial workshops. Integration and handling in the tooling system Available in the common CCMT format with plate size 06 and nominal thickness 02, the insert fits standard CCMT-compatible toolholders, simplifying tool inventory and changeover procedures. The indexable design allows multiple cutting edges per insert, improving cost-efficiency compared with single-point tools. Clear identification through the ISO designation and Walter Tools’ series marking assists in rapid selection for specific rostfreier Stahl tasks and ensures compatibility within existing turning tool systems. For application support, tool recommendations or fast supply of Walter Tools inserts, contact Metav Werkzeuge — Metav’s specialists provide tailored advice for integrating Tiger·tec Silver inserts into production processes Technical data Article number: CCMT060202-FM4-WMP20S-WALTER SKU: CCMT060202-FM4-WMP20S-WALTER Item designation: CCMT060202-FM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: FM4 Form: Rhombus 80° Relief angle: 7° Corner radius: 0.2 mm Plate size: 06 Thickness: 02 Suitable material group: rostfreier Stahl Product type: indexable turning/boring insert (CCMT) Numbers / Core technical data Relief angle: 7° Corner radius: 0.2 mm Plate size: 06 Thickness: 2.00 (nominal designation 02) ISO designation: CCMT060202-FM4 WMP20S SKU: CCMT060202-FM4-WMP20S-WALTER Special features / Versions Coating technology: Tiger·tec Silver Carbide grade: WMP20S (coated carbide) Chip control: FM4 chipbreaker Application focus: rostfreier Stahl machining Geometry: rhombic 80° insert form Usage: turning and boring operations FAQ What materials is this insert designed for? The CCMT060202-FM4 WMP20S insert is specified for machining rostfreier Stahl; the WMP20S grade and Tiger·tec Silver coating support secure chip formation and thermal resistance when working with stainless steels. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker delivers consistent chip control and evacuation, improving process stability and reducing the risk of entangling chips during turning with this Walter Tools indexable insert. Which toolholders accept this insert format? Standard CCMT-compatible turning holders accept the CCMT060202-FM4 geometry; the insert’s rhombic 80° form and plate size 06 correspond to common clamping systems in industrial tool ranges. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius increases edge strength compared with a very small radius, enabling a compromise between improved surface finish and resistance to chipping under medium cuts in rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer. The Walter brand is used where applicable.
CCMT060202-FM4 WSM10S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the FM4 chipbreaker to secure stable chip formation and longer tool life when machining stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and toolholder matching. CCMT060202-FM4 WSM10S indexable insert — rhombic 80° geometry, Tiger‑tec Silver, Walter Tools CCMT060202-FM4 WSM10S is an indexable cutting insert for turning and boring operations, designed for demanding applications in stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating Suitable for stainless steels and superalloys Rhombic 80° form for versatile turning 0.2 mm corner radius for edge security Increase process reliability when machining tough materials The combination of the Tiger‑tec Silver coating and a coated carbide substrate delivers improved thermal resistance and edge stability, which reduces the frequency of tool change and supports consistent part quality. For materials assigned to ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), the WSM10S grade is formulated to control built‑up edge and withstand elevated cutting temperatures; the result is more predictable tool life and reduced scrap rates. The integrated FM4 chipbreaker promotes reliable chip control during interrupted cuts and heavy cross‑sections, helping to maintain cycle time and surface integrity on finished components. Geometry engineered for secure cutting and better surface finish The rhombic 80° shape offers a favourable approach angle for general turning and light boring, combining accessibility with robust cutting edge support. A 0.2 mm corner radius increases resistance to chipping while preserving the capacity for fine surface finishes in finishing passes. The moderate 7° clearance helps to avoid rubbing on the flank face, lowering heat transfer into the workpiece and improving dimensional stability. These geometric choices translate into tangible benefits on the shop floor: smoother tool behaviour, improved reproducibility and a lower risk of unexpected tool failure. Practical integration and machining recommendations for production The insert is available in the common CCMT size and fits standard toolholders for economical retrofit into existing tool assemblies. For stainless steels and superalloys, prefer higher cutting speeds with controlled feed and appropriate coolant or minimum‑quantity lubrication to manage workpiece heating; the Tiger‑tec Silver technology supports this approach by maintaining the cutting edge under thermal load. Use the FM4 chipbreaker geometry for mixed roughing/finishing tasks where chip separation and evacuation are critical. If process optimisation is required, Metav Werkzeuge can supply cutting data, holder recommendations and grade comparisons to match each production requirement. Contact Metav Werkzeuge for tailored cutting data, toolholder suggestions and to order the Walter Tools CCMT060202-FM4 WSM10S insert directly: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: CCMT060202-FM4-WSM10S-WALTER Designation: CCMT060202-FM4 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Free angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 80° Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FM4 Grade: WSM10S (coated carbide) Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Application: turning and boring indexable insert Execution: T FAQ What materials is this insert suitable for? The CCMT060202-FM4 WSM10S insert from Walter Tools is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering stability and controlled chip formation in these demanding materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal resistance and enhances edge stability, which reduces wear rates and supports higher cutting speeds when using the CCMT060202-FM4 WSM10S insert. Which geometry advantages does the rhombic 80° offer? The rhombic 80° geometry provides a versatile approach angle for both turning and light boring, improving accessibility while maintaining a robust cutting edge for consistent surface finish and dimensional accuracy. When should the FM4 chipbreaker be chosen? Choose the FM4 chipbreaker on the CCMT060202-FM4 WSM10S when reliable chip control is essential, for example with interrupted cuts, variable cross‑sections or when machining sticky stainless steels where chip evacuation can be problematic. Is this insert compatible with common CCMT toolholders? Yes, the insert follows the standard CCMT form factor and is compatible with typical CCMT toolholders; consult Metav Werkzeuge for holder suggestions and optimal clamping parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names are referenced solely for explanation; there is no affiliation between our company and those brands. The offered item is an original, factory‑new product of the manufacturer.
CCMT060202-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for stable cutting in demanding alloys, plus the FM4 chipbreaker for predictable chip control; order directly via Metav Werkzeuge or request tailored application advice. CCMT060202-FM4 WSM20S indexable insert for stainless steels and superalloys — Walter Tools The CCMT060202-FM4 WSM20S is a rhombic 80° turning and drilling indexable insert engineered for secure chip formation and consistent edge stability when machining stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated carbide grade WSM20S Optimised FM4 chipbreaker for stable chip control Rhombic 80° geometry with 0.2 mm corner radius Designed for stainless steels and superalloys High-performance cutting for demanding alloys The combination of the Tiger·tec Silver coating with the WSM20S grade delivers a balanced mix of wear resistance and thermal stability geared towards machining stainless steels and superalloys. This coated carbide formulation supports reliable heat management at the cutting edge, reducing the tendency for built‑up edge on tough, ductile materials. As a result, cycle times can be kept consistent and surface quality improved, which benefits both batch production and difficult one‑off operations. Controlled chips and secure cutting edges The insert’s FM4 chipbreaker is designed for predictable chip separation and evacuation, reducing interruptions and tool damage from erratic chip forms. Combined with the rhombic 80° geometry and a 0.2 mm corner radius, the geometry supports a robust cutting edge and controlled engagement under variable feeds and depths. The modest clearance angle (7°) aids in edge strength while maintaining effective contact geometry, contributing to a lower risk of sudden edge failure and more stable machining processes. Compatibility and efficient handling The CCMT form (06 size, 02 thickness) ensures wide compatibility with standard toolholders for turning and boring applications, allowing straightforward insert changes and minimal setup time. As an indexable insert, it enables quick replacement without regrinding, supporting predictable tool life management and reduced inventory complexity. The insert’s standard form factor also simplifies integration into existing tool chains and contributes to efficient spare‑parts handling in production environments. Process security and productivity gains Using a coated grade optimised for tough alloys enhances process security by delivering repeatable performance and longer edge life under thermally demanding conditions. The design choices—coating technology, chipbreaker profile and geometry—aim to increase productivity through fewer tool changes and fewer surface defects, while maintaining dimensional stability over longer tool life. Walter Tools’ engineering focus supports consistent results across a broad range of demanding workpiece materials. For tailored cutting recommendations, application trials or a project quote for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: CCMT060202-FM4-WSM20S-WALTER Designation: CCMT060202-FM4 Brand: Walter Tools Grade: WSM20S Series: Tiger·tec Silver Product type: drilling / bore / turning indexable insert Facts Geometry: Rhombus 80° Clearance angle: 7° Corner radius: 0.2 mm Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FM4 Coating: Tiger·tec Silver Substrate: coated carbide Material groups: S / M (superalloys / stainless steels) Intended use: machining of difficult‑to‑cut alloys FAQ What materials is this insert suitable for? The CCMT060202-FM4 WSM20S insert is designed primarily for stainless steels and heat‑resistant superalloys, offering a balance of thermal resistance and edge stability. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker provides controlled chip formation and evacuation, which reduces the risk of chip entanglement and supports steady cutting conditions when machining ductile or heat‑sensitive materials. Which toolholders are compatible with this insert form? The CCMT form and 06 size follow common industry standards for turning and boring toolholders, allowing use in a broad range of conventional indexable tool systems. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and helps manage heat at the cutting edge, contributing to longer tool life and improved surface finishes on demanding materials. Is this insert suitable for interrupted cuts? The insert’s robust geometry and coated carbide grade enhance edge strength and make it a viable option for many interrupted cut applications, depending on process parameters and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, an FM4 chipbreaker and a robust rhombic geometry to improve process stability when machining stainless steels and heat‑resisting alloys; order the CCMT060202‑FM4 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. CCMT060202‑FM4 WSM30S — Rhombic 80° turning and drilling indexable insert by Walter Tools, Tiger·tec Silver CCMT060202‑FM4 WSM30S is an indexable insert designed for turning, boring and drilling support in demanding materials such as stainless steels and superalloys, offering stable cutting edges and optimised chip control. Tiger·tec Silver coating for high temperature stability Optimised FM4 chipbreaker for secure chip control 7° clearance angle with 0.2 mm corner radius Rhombic 80° insert for versatile turning/boring Stable performance for stainless steels and superalloys The coated grade WSM30S from the Tiger·tec Silver family is developed for machining stainless steels (ISO group M) and heat‑resisting alloys and titanium (ISO group S). Its formulation supports secure chip formation and reduces built‑up edge risk, which leads to increased process reliability. In practice this means fewer interruptions for tool change and more consistent component quality when handling tough, heat‑sensitive workpieces. Controlled chip flow reduces cycle time and risk The insert’s FM4 chipbreaker is optimised to form short, manageable chips in conditions that typically generate stringing or serrated chips. Controlled chip geometry improves coolant access and reduces the likelihood of tool damage and workpiece rework. Operators benefit from steadier feed rates and a lower tendency for workpiece surface defects, resulting in tangible productivity gains on series parts. Geometry and edge design increase application range A rhombic 80° shape combined with a 0.2 mm corner radius and 7° clearance angle provides a balance between versatility and edge strength. This geometry allows secure engagement in both finishing and light roughing passes, while the relatively small corner radius helps achieve finer surface finishes. The insert thickness and shape codes indicate compatibility with standard toolholders for turning and boring, simplifying tool management at the machine. Process security and predictable tool life Using a grade tailored to tough alloys supports a stable cutting edge at elevated temperatures, which, together with the coating and chipbreaker, extends effective tool life and reduces scrap rates. For production environments where repeatability and surface integrity are critical, these design choices contribute to lower total machining costs and higher first‑pass yields, especially on components made from heat‑resistant and corrosion‑resistant materials. For demanding stainless‑steel and superalloy machining tasks, request the Tiger·tec Silver WSM30S inserts from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and availability Technical data Article number: CCMT060202‑FM4‑WSM30S‑WALTER Designation: CCMT060202‑FM4 Grade/series: WSM30S, Tiger·tec Silver Manufacturer: Walter Tools Facts Corner radius: 0.2 mm Clearance angle: 7° Insert size: 06 Thickness code: 02 Special features Chipbreaker: FM4 Insert form: Rhombus 80° Material application: S / M Tolerance class: M Execution: T FAQ What materials is this insert intended for? The CCMT060202‑FM4 WSM30S from Walter Tools is intended primarily for stainless steels (ISO group M) and heat‑resisting superalloys/titanium (ISO group S), offering stable edge behaviour in these demanding materials. How does the FM4 chipbreaker improve machining? The FM4 chipbreaker on this insert shapes chips to be short and controllable, which improves coolant penetration, reduces entanglement and lowers the risk of tool and workpiece damage during turning and boring operations. What are the geometric benefits of the rhombic 80° shape? The rhombic 80° geometry provides versatility for both finishing and light roughing, enabling use in a range of toolholders while offering favourable approach angles for turning and boring tasks. Can this insert achieve a good surface finish with a small corner radius? Yes; the 0.2 mm corner radius supports finer surface finishes when used in appropriate feed and speed windows while still maintaining reasonable edge strength. Is this grade suitable for high‑temperature cutting conditions? The Tiger·tec Silver coating and the WSM30S grade are engineered for improved thermal resistance and edge protection, making them suited to higher cutting temperatures typical of stainless and heat‑resisting alloy machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. References to brand names are for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CCMT060202-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of a fine‑finish cermet grade, reliable chip control and a compact rhombic geometry to enhance surface quality and process stability; order via Metav Werkzeuge or request cutting data from the technical team. CCMT060202-FP4 WEP10C — Turning indexable insert, Rhombic 80°, 0.2 mm corner radius — Walter Tools The CCMT060202-FP4 WEP10C is a rhombic 80° indexable insert engineered for precision turning and boring tasks in industrial metalworking applications. Cermet grade WEP10C for fine finishes Rhombic 80° geometry for versatile turning 0.2 mm corner radius for precise profiles FP4 chipbreaker for controlled chip formation Improved surface quality through a cermet edge The cermet composition of this insert is designed to deliver consistently fine surface finishes with reduced built‑up edge formation. In finishing operations the WEP10C grade shows a stable cutting behaviour that supports dimensional accuracy and lowers the need for subsequent rework. Due to the material specifics, suitability for particular workpiece materials should be verified against the product matrix to ensure optimal process parameters and expected tool life. Predictable chip control and process security The integrated FP4 chipbreaker promotes controlled chip formation and evacuation, helping to maintain a stable cutting zone and reduce interruptions. Combined with the 0.2 mm corner radius, the insert supports precise profile generation while limiting local stress peaks at the cutting edge. For process planners this means fewer cycle anomalies and a more repeatable machining sequence, which contributes directly to higher throughput and lower scrap rates. Geometry and tolerance for flexible tool assignment The Rhombic 80° shape and the 7° clearance angle enable versatile mounting in standard CCMT toolholders and suit a range of turning operations from light roughing to finishing. The insert’s tolerance class M ensures consistent interchangeability across tool assemblies, simplifying inventory management and changeover procedures on the shop floor while preserving part quality. Practical handling and specification notes The insert is supplied in the Walter Cermet series and carries the designation CCMT060202‑FP4; thickness and size are indicated by the manufacturer coding. Material specification is catalogue dependent, so detailed substrate and coating information should be confirmed in the current catalogue entry. For complex applications the technical data sheet and cutting recommendations are available to aid in selecting feed, speed and depth settings for safe, efficient machining. Contact Metav Werkzeuge for cutting data, compatibility checks and to arrange supply of Walter Tools CCMT060202-FP4 WEP10C inserts Technical data SKU: CCMT060202-FP4-WEP10C-WALTER Designation: CCMT060202‑FP4 WEP10C Series: Walter Cermet Grade: WEP10C Facts Insert shape: Rhombic 80° Corner radius: 0.2 mm Clearance angle: 7° Size code: 06 Thickness code: 02 Tolerance class: M Special features FP4 chipbreaker Cermet cutting material (catalogue dependent) Execution: T Note: Verify workpiece suitability via product matrix FAQ What machining tasks is this insert suited for? The CCMT060202‑FP4 WEP10C insert is intended for precision turning and boring operations where a fine surface finish and controlled chip flow are required; check the product matrix for specific material recommendations. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes short, manageable chips and stabilises the cutting zone, improving process reliability when using the WEP10C cermet grade. Can this insert be used in all standard CCMT holders? Yes, the rhombic 80° format and tolerance class M permit use in compatible CCMT toolholders; confirm holder compatibility by toolholder manufacturer specifications. Is the cutting material specified in the catalogue? Material details are catalogue dependent; customers should consult the latest Walter Cermet catalogue or request the technical data sheet for precise substrate and coating information. What does the 0.2 mm corner radius mean for part finish? A 0.2 mm corner radius helps produce accurate profiles with reduced stress concentration at the edge, supporting improved surface integrity in finishing passes. Hersteller: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between our company and the mentioned manufacturers. The offered article is an original, factory‑new product of the manufacturer.
CCMT060202-FP4 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, stable FP4 chip control and a precise rhombic geometry to keep machining cycles productive and predictable; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CCMT060202-FP4 CCMT060202-FP4 WKP01G (WKP01G) turning indexable insert for steel and cast iron — Walter Tools A CCMT060202-FP4 WKP01G indexable turning insert designed for robust finishing and medium‑duty turning in steel and cast iron, featuring a Tiger‑tec Gold coated carbide grade and FP4 chipbreaker geometry. Tiger‑tec Gold coated carbide grade Optimised FP4 chipbreaker geometry Rhombic 80° shape, 0.2 mm corner radius For steel (P) and cast iron (K) Stable edge life for continuous production The combination of a Tiger‑tec Gold coating and a coated carbide substrate delivers enhanced wear resistance and consistent tool life across repeated cycles. This insert’s protective coating reduces flank and crater wear, which translates into fewer tool changes and steadier process throughput. The result is measurable productivity gains when turning common engineering steels and castings, with a focus on repeatable, reliable performance rather than experimental gains. Predictable chip formation to reduce interruptions Equipped with the FP4 chipbreaker, the indexable insert promotes controlled chip breaking and evacuation during typical turning operations. Predictable chip forms minimise the risk of entanglement and machine stoppages, supporting uninterrupted production runs. The insert’s geometry is tuned for the chip behaviour of both steel and cast iron, which makes it suitable for mixed production schedules where quick, clean chip control is essential for operator safety and process stability. Geometry engineered for dimensional accuracy The rhombic 80° shape combined with a 0.2 mm corner radius and a 7° relief angle provides a stable cutting edge and repeatable seating in standard CCMT toolholders. This geometry helps maintain consistent radial engagement and reduces deflection during finishing passes, supporting improved surface quality and tighter tolerance control. For operations where predictable form and fit are required, the insert’s design contributes directly to part quality and downstream assembly reliability. Versatility across common workpiece materials Designed for ISO groups P and K, the insert is applicable to a broad range of unalloyed and alloyed steel grades and abrasive cast irons. Its coating and grade selection balance toughness and hardness to cope with typical heat generation and abrasive wear encountered in these materials. As a result, this indexable insert suits shops that process both turned components and cast workpieces, offering a single standardised component to simplify tooling logistics and tool inventory. For machining tasks that demand consistent cutting performance, contact Metav Werkzeuge to specify the CCMT060202-FP4 WKP01G from Walter Tools and receive tailored recommendations for toolholder selection and cutting data. Technical Data Article number: CCMT060202-FP4-WKP01G-WALTER Designation: CCMT060202-FP4 WKP01G Series: Tiger‑tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Plate shape: Rhombic 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: FP4 Material suitability: steel (P), cast iron (K) Substrate: coated carbide Application: turning / indexable insert FAQ What materials is this insert suitable for? The CCMT060202-FP4 WKP01G insert is intended for machining steel (ISO group P) and cast iron (ISO group K), as specified by the grade and coating selection. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker promotes consistent chip segmentation and evacuation, reducing the likelihood of chip-related interruptions and supporting reliable cycle times with the Walter Tools insert. Is this insert compatible with standard CCMT toolholders? Yes — the geometry corresponds to the common CCMT format and seats in standard turning toolholders designed for rhombic 80° indexable inserts. Can the insert be used for finishing and semi‑finishing operations? The combination of a 0.2 mm corner radius and the Tiger‑tec Gold coating makes the insert suitable for finishing and medium‑duty semi‑finishing, offering a balance between edge strength and surface quality. What advantages does the Tiger‑tec Gold technology provide? Tiger‑tec Gold coating enhances wear resistance and cutting edge stability, extending usable tool life and improving process consistency when machining steels and cast irons with the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The advertised article is original, brand‑new merchandise of the manufacturer.
CCMT060202-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, predictable chip control and repeatable geometry for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for process recommendations. Drehwendeschneidplatte CCMT060202-FP4 WPP10G for steel – Walter Tools CCMT060202-FP4 WPP10G is an indexable turning insert designed for general steel machining, combining Tiger·tec Gold coating and a dedicated FP4 chipbreaker for stable production performance Tiger·tec Gold coating for long tool life Optimised chip control with FP4 chipbreaker Rhombic 80° geometry, 0.2 mm nose radius Suited for steel (ISO P) machining Productivity and consistent performance for demanding turning The combination of Tiger·tec Gold technology and a coated carbide substrate ensures a robust cutting edge that extends tool life and raises machining uptime. The insert’s geometry—Rhombic 80° with a 0.2 mm nose radius and a 7° clearance—was developed to balance cutting stability with adaptability across a wide range of turning operations. As a result, process planners gain predictable wear behaviour, reduced tool changes and more consistent output quality, which directly supports higher throughput in series production. Reliable chip control and improved surface quality in steel The integrated FP4 chipbreaker and the WPP10G grade are tuned for the thermal and metallurgical characteristics of steel (ISO P). This combination delivers controlled chip formation, minimises the risk of built-up edge and helps to achieve superior surface finishes without extensive secondary finishing. In practical terms, the insert reduces time spent on chip management and rework, while offering a balance between wear resistance and toughness that is advantageous for medium-duty to higher-duty turning tasks in mixed-series manufacturing. Predictable dimensions and easy toolpool integration for planning Marked as CCMT060202-FP4, the insert follows familiar ISO coding and is made to a tolerance class M, supporting interchangeability and simple tool replenishment. The standardised 06 size and 02 thickness allow straightforward indexing in common toolholders, while the defined geometry helps engineers estimate feed and depth values with confidence. Clear, repeatable specifications make the insert suitable for production environments that prioritise reproducibility and quick setup times, reducing process variability and aiding lean manufacturing strategies. For dependable steel turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and application support: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060202-FP4-WPP10G-WALTER ISO designation: CCMT060202-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Free cutting angle: 7° Nose radius: 0.2 mm Plate form: Rhombic 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Grade: WPP10G (Tiger·tec Gold coated carbide) Chipbreaker: FP4 Application: Steel (ISO P) Sort and series description: coated carbide; designed for steel with balanced wear resistance and toughness FAQ What materials is this insert designed for? The CCMT060202-FP4 WPP10G indexable insert from Walter Tools is intended primarily for steel (ISO P) machining and is optimised for the typical heat and chip behaviour of these materials. What advantages does the WPP10G grade provide? The WPP10G grade in the Tiger·tec Gold series combines a coated carbide substrate with surface engineering that improves edge stability and tool life, offering a compromise between wear resistance and toughness for varied steel turning tasks. Which operations suit the 0.2 mm nose radius and rhombic 80° geometry? The Rhombic 80° form with a 0.2 mm nose radius on the CCMT060202-FP4 WPP10G is well suited to finishing and semi-finishing passes where surface quality and dimensional control are required, while still allowing flexible entry and exit angles. How does the FP4 chipbreaker influence machining? The FP4 chipbreaker controls chip formation for typical steel grades, reducing long or tangled chips and improving expedience in chip handling and surface integrity during turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the durable Tiger‑tec Gold coating and the versatile FP4 chipbreaker combined with a compact Rhombus 80° form to secure reliable, repeatable turning performance in Stahl operations; order the insert directly via Metav Werkzeuge or consult the team for process recommendations. CCMT060202-FP4 WPP20G – Rhombus 80° turning insert with Tiger‑tec Gold by Walter Tools The CCMT060202-FP4 WPP20G is a rhombic 80° indexable insert engineered for turning and boring tasks, optimised for general-purpose Stahl machining with a fine 0.2 mm corner radius and 7° clearance Tiger‑tec Gold coated carbide Optimised for Stahl applications Rhombus 80° geometry for versatile cutting FP4 chipbreaker for reliable chip control Enhanced tool life from modern coating technology The Tiger‑tec Gold coating on this grade provides a balanced combination of wear resistance and toughness, extending tool life under typical turning conditions. The WPP20G grade denotes a coated carbide designed for Stahl machining where consistent thermal behaviour and predictable chip formation are required. By reducing flank and crater wear, the coating supports longer uninterrupted cuts and fewer index changes, which increases component throughput and reduces unplanned downtime. Geometry and chip control for stable productivity A Rhombus 80° shape with a 0.2 mm corner radius and the dedicated FP4 chipbreaker combine to deliver stable cutting in a range of cutting parameters. The geometry allows comfortable access to shoulders and reduced cutting forces on interrupted cuts, while the chipbreaker shapes chips to avoid entanglement and promote safe evacuation. These features translate into steadier surface finishes and repeatable results, even in serial production where process stability is essential. Practical application guidance for workshop use This insert is tailored to Stahl applications and performs well across unalloyed and alloyed steels commonly grouped under ISO material class P. The moderate corner radius and clearance angle (7°) suit finishing and light profiling where dimensional control matters. For less experienced users: coated carbide means a hard substrate with a thin functional coating that resists abrasion; the chipbreaker designation indicates the insert’s ability to control chip form. For specific feeds, speeds and holder recommendations, consult machining data to align insert behaviour with the workpiece material and machine capabilities. Contact Metav Werkzeuge for tailored advice on integrating the Tiger‑tec Gold WPP20G insert into production, or request cutting data and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060202-FP4-WPP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060202-FP4 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold ISO designation: CCMT060202-FP4 WPP20G Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Thickness code: 02 Tolerance class: M Special features Chipbreaker: FP4 Grade: WPP20G Material: coated carbide Application: Stahl Execution: T FAQ What materials is this insert suitable for? The CCMT060202-FP4 WPP20G insert is designed primarily for Stahl applications, delivering controlled chip formation and consistent wear behaviour in unalloyed and alloyed steels. What does the WPP20G grade indicate? WPP20G identifies a Walter Tools coated carbide grade within the Tiger‑tec Gold family that balances wear resistance and toughness for general-purpose Stahl turning. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker improves chip control and evacuation, supporting safer turning operations and better surface quality when using the CCMT060202-FP4 WPP20G insert. Is the 0.2 mm corner radius suitable for finishing operations? Yes, the fine 0.2 mm radius is suited to finishing and light profiling tasks where dimensional accuracy and surface integrity are priorities. Can this insert be used for interrupted cuts? The rhombic 80° geometry and robust coating provide good resistance to edge chipping, making the insert appropriate for many interrupted and general turning applications in Stahl. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCMT060202-FW4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, economical tool life and precise chip control for efficient steel turning; order directly via Metav Werkzeuge or contact the technical team for application advice. CCMT060202-FW4 WPP20G indexable turning insert — Tiger·tec Gold coated, Rhombic 80°, 7° clearance by Walter Tools The CCMT060202-FW4 WPP20G is an indexable turning insert designed for reliable machining of steel, combining a Tiger·tec Gold-coated carbide grade with a medium clearance geometry for versatile turning operations. Tiger·tec Gold coating for extended tool life Suitable for steel (ISO P) machining Rhombic 80° form with 7° clearance FW4 chipbreaker for reliable chip control Consistent cutting performance across steel applications The insert's core advantage lies in the WPP20G coated carbide grade, which is engineered for stable wear behaviour when machining steels classified under ISO P. Because the coating reduces adhesion and improves heat resistance, the cutting edge maintains sharpness for longer periods, which translates into fewer indexings and reduced machine downtime. For workshops aiming to combine productivity with predictable tool life, the use of a robust coated grade delivers measurable benefits in cycle-time stability and surface consistency. Geometry engineered for controllable chips and good surface finish The Rhombic 80° geometry with a 7° clearance angle offers a balance between strength and accessibility when turning external profiles and shoulders. The FW4 chipbreaker is designed to split and curl chips into manageable segments, lowering the risk of entanglement and improving evacuation, particularly in medium-depth cuts. A corner radius of 0.2 mm supports fine finishing passes while helping to protect the cutting edge from impact loads; this combination reduces rework and contributes to a reliable surface quality on the workpiece. Practical benefits that affect the bottom line Operationally, the insert supports productive chip formation and stable cutting forces, which together increase process reliability and reduce unplanned tool changes. The indexable design allows a straightforward rotation to a fresh cutting edge, improving uptime versus solid tooling alternatives. When evaluated over multiple shifts, the improved wear resistance and consistent edge performance of the Tiger·tec Gold technology can lower total tooling cost per component and simplify tool management in production environments. For demanding steel turning tasks, specify the Walter Tools CCMT060202-FW4 WPP20G and consult Metav Werkzeuge for application-matched recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutting parameters and availability Technical data Article number: CCMT060202-FW4-WPP20G-WALTER Designation: CCMT060202-FW4 WPP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FW4 Material class suitability: Steel (ISO P) Series/collection: Tiger-tec Gold Execution: T FAQ What materials is this insert intended for? The CCMT060202-FW4 WPP20G is specified for machining steels classified under ISO P and is optimised for the thermal and chip-formation behaviour typical of these materials. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the WPP20G grade improves heat resistance and reduces adhesion on the cutting edge, resulting in longer life and more consistent performance during serial turning with this Walter Tools insert. Which geometry features aid chip control? The rhombic 80° form combined with a 7° clearance and the FW4 chipbreaker ensures segmented, controllable chips and reliable evacuation for a range of turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CCMT060202-FW4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of stable edge life, controlled chip formation and versatile geometry for reliable turning of stainless steel and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or consult our team for application-specific cutting data. CCMT060202-FW4 WSM20S indexable turning insert — Walter Tools, Tiger-tec Silver, FW4 chipbreaker CCMT060202-FW4 WSM20S is an indexable turning insert designed for demanding external turning and profiling applications in stainless steel and superalloys Tiger‑tec Silver coating for extended tool life FW4 chipbreaker for controlled chip formation Rhombic 80° shape for versatile turning operations 0.2 mm corner radius for consistent surface finish Consistent performance on stainless steel and superalloys The coated carbide grade WSM20S from the Tiger‑tec Silver family combines wear resistance with thermal stability, supporting secure chip formation when machining challenging materials. Specified for ISO groups M and S, the insert offers a 7° relief angle and a 0.2 mm corner radius, which together help to maintain a stable cutting edge under thermal and mechanical load. This results in a reliable surface finish and predictable tool life, reducing process variation on stainless and heat‑resistant alloys. Productivity gains through optimised geometry and chip control Featuring the FW4 chipbreaker and a rhombic 80° platform, the insert promotes consistent chip flow and clog‑resistant cutting, which helps to lower cycle times and minimise unplanned interruptions. The coated carbide construction from the Tiger‑tec Silver series supports higher cutting temperatures and improves resistance to abrasive wear; the outcome is a cost‑efficient milling routine with fewer index changes and enhanced throughput. Practical compatibility and handling benefits for production The insert’s CCMT form is compatible with common turning toolholders that accept rhombic 80° inserts, enabling quick indexing and uncomplicated replacement of worn edges. The tolerance class M ensures consistent seating and repeatable geometry across batches. For workshops transitioning between materials, this insert permits flexible set‑up for both medium and demanding turning tasks, while indexability reduces inventory complexity compared with brazed or solid tools. Contact Metav Werkzeuge for tailored cutting data and ordering of Walter Tools Tiger‑tec Silver inserts via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics Technical Data SKU: CCMT060202-FW4-WSM20S-WALTER Designation: CCMT060202-FW4 Full designation: CCMT060202-FW4 WSM20S Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Rhombus 80° Size code: 06 Thickness code: 02 Tolerance class: M Special features Grade: WSM20S Series: Tiger‑tec Silver Chipbreaker: FW4 Coating: coated carbide (Tiger‑tec Silver) Material suitability: stainless steel, heat‑resistant superalloys / titanium (ISO groups M and S) FAQ What materials is this insert suitable for? The CCMT060202-FW4 WSM20S indexable turning insert (Walter Tools, Tiger‑tec Silver) is intended for stainless steel and heat‑resistant superalloys/titanium, corresponding to ISO material groups M and S. What are the key geometric specifications? The insert has a 7° relief angle, a 0.2 mm corner radius, a rhombic 80° form and a CCMT size code of 06, as defined for the CCMT060202 configuration. Is the insert coated and what benefit does the coating provide? Yes — the WSM20S grade uses the Tiger‑tec Silver coating technology, which enhances thermal resistance and wear performance for longer tool life under demanding cutting conditions. Which chipbreaker is integrated and what is its effect? The integrated FW4 chipbreaker promotes controlled chip formation and reliable evacuation, supporting stable cutting at varying depths of cut and minimising chip‑related interruptions. Can this insert be indexed and replaced in standard toolholders? The CCMT geometry matches standard toolholder pockets for rhombic 80° inserts, enabling quick indexing and straightforward replacement to restore a fresh cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
CCMT060204 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coating and the WSM30S grade for reliable machining of stainless steel and heat‑resistant alloys; the rhombic 80° form with a 0.4 mm nose radius and 7° relief ensures stable cutting edges and consistent surface quality. Order the CCMT060204‑E47 WSM30S directly via Metav Werkzeuge or consult our technical advisors for process matching. CCMT060204-E47 WSM30S – Rhombic 80° indexable insert for drilling and boring, Tiger‑tec Silver; Walter Tools The CCMT060204‑E47 WSM30S is an indexable cutting insert designed for drilling and boring applications, optimised for stainless steel and high‑temperature superalloys where secure chip formation and edge stability are required. Tiger‑tec Silver coated carbide grade WSM30S Suited for stainless steel and superalloys M/S Rhombic 80° form with 0.4 mm nose radius 7° relief angle for stable cutting performance High process reliability for stainless steel and superalloys The combination of the WSM30S grade and Tiger‑tec Silver coating is engineered to resist thermal and mechanical wear during the machining of stainless steel and heat‑resistant alloys. This coated carbide composition supports controlled cutting edge behaviour and reduces the risk of built‑up edge, delivering consistent component tolerances and fewer tool changes. For demanding materials where heat generation and toughness challenge the cutting edge, this insert provides predictable performance and durable service life. Geometry that secures surface finish and edge strength The rhombic 80° shape with a 0.4 mm nose radius and a 7° relief angle balances strength and accessibility: the larger corner radius enhances edge durability, while the 80° form maintains cutting engagement for bore and drill support operations. The CCMT form factor is suitable for common toolholder pockets, enabling repeatable seating and straightforward indexing. The engineered geometry contributes to steady surface quality and reduced vibration in interrupted or unstable cuts. Chip control and longevity for efficient production Equipped with the E47 chipbreaker, the insert promotes reliable chip formation across a range of feeds and depths, which lowers cycle interruptions and improves machine utilisation. Improved chip control directly supports longer tool life and fewer tool changes, yielding measurable productivity gains. When integrated into a process with appropriate cutting data and coolant strategy, the result is a more economical machining cycle and enhanced output consistency. Practical integration and application guidance As an indexable insert, this product simplifies inventory management and reduces regrinding costs compared with brazed or solid tooling. The WSM30S variant from Walter Tools pairs well with holders designed for the CCMT geometry; for precise holder selection and cutting‑data recommendations, Metav Werkzeuge’s technical team can advise on optimal combinations. For complex geometries or mixed‑material batches, professional process support helps to unlock the full potential of the insert. For applications requiring stable cutting performance on stainless steel and superalloys, request the Walter Tools CCMT060204‑E47 WSM30S via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 to discuss tooling combinations and process parameters Technical Data Article number: CCMT060204-E47-WSM30S-WALTER SKU: CCMT060204-E47-WSM30S-WALTER Designation: CCMT060204-E47 WSM30S Facts Relief angle: 7° Nose radius: 0.4 mm Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Coating/series: Tiger‑tec Silver Grade/sort: WSM30S Chipbreaker: E47 Plate form: Rhombus 80° Material suitability: S / M (superalloys / stainless steel) Execution: T FAQ Which materials is this insert suitable for? The CCMT060204‑E47 WSM30S is designed primarily for stainless steel and heat‑resistant superalloys (material groups M and S), offering secure chip formation and edge stability in these demanding alloys. What does the WSM30S grade offer compared with standard grades? WSM30S, in combination with the Tiger‑tec Silver coating, provides enhanced thermal resistance and wear control for Walter Tools inserts, improving consistency and tool life when machining tough, heat‑generating materials. How does the E47 chipbreaker affect cutting performance? The E47 chipbreaker on the CCMT060204‑E47 promotes reliable chip segmentation and evacuation, reducing the likelihood of entanglement and helping maintain steady cutting conditions for improved productivity. Is the CCMT060204‑E47 compatible with standard toolholders? The insert follows the CCMT form factor and is compatible with holders designed for CCMT‑style inserts; for confirmation of fit and clamping requirements, refer to the toolholder specifications or contact Metav Werkzeuge for advice. What measures extend the service life of this insert? Appropriate selection of feeds, speeds and coolant, together with correct clamping and regular inspection, will extend tool life; the WSM30S grade and Tiger‑tec Silver coating further support longevity under thermal load. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no connection between Metav Werkzeuge and the respective trademark owners; the offered item is an original, brand‑new product from the manufacturer.
CCMT060204-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with a 0.4 mm nose radius and the E47 chipbreaker provides reliable chip control and extended tool life when machining steel; order the CCMT060204-E47 WPP20G insert through Metav Werkzeuge or contact our consultants for application support. CCMT060204-E47 WPP20G indexable turning insert, Tiger·tec Gold — for steel (Walter Tools) The CCMT060204-E47 WPP20G is an indexable turning insert engineered for precision machining of ISO P materials, offering a balance of wear resistance and chip control for productive steel operations. Tiger·tec Gold coating for enhanced wear resistance 0.4 mm nose radius for consistent surface finish 7° relief angle for controlled chip formation Rhombic 80° shape for stable seating Reliable performance through advanced coating technology The combination of a coated carbide grade and the Tiger·tec Gold series delivers a clear benefit: extended tool life under the thermal and mechanical loads typical of steel turning. The coating optimises surface hardness and friction behaviour, which leads to improved wear resistance and more consistent component tolerances over longer production runs. For operations where predictable tool change intervals and repeatable part quality matter, this insert provides measurable process stability. Geometry tuned for consistent surface quality A 0.4 mm nose radius and a 7° relief angle are design choices that favour repeatable finishes without excessive cutting forces. The modest nose radius supports dimensional control on turned profiles while reducing the risk of chatter on medium-duty passes. The rhombic 80° plate form offers a secure clamping seat and reliable edge support, which together contribute to steady surface integrity and reduced rework requirements. Controlled chip formation for uninterrupted production The E47 chipbreaker is matched to the insert geometry and material group to promote controlled chip breakage when machining steel. Effective chip control reduces the likelihood of entanglement, eases chip evacuation, and helps maintain machine uptime. Where throughput and safety are priorities, the integrated chip control features translate into fewer interruptions and a cleaner working environment on the shop floor. Practical integration and selection guidance Designated in the CCMT format and supplied in tolerance class M, the insert fits common holders for turning operations and can be specified by its ISO designation for straightforward procurement and tool setup. The grade WPP20G is marked for steel applications and represents a balance between wear resistance and toughness, making the insert suitable for a broad range of general turning tasks. For precision alignment with process parameters, consult tooling charts or our specialists to match holder geometry and cutting data to the component requirements. Contact Metav Werkzeuge for tailored cutting-parameter advice or to request the CCMT060204-E47 WPP20G insert from our stock — our specialists will assist with application recommendations and compatibility checks Technical Data Article number: CCMT060204-E47 WPP20G SKU: CCMT060204-E47-WPP20G-WALTER Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Nose radius: 0.4 mm Relief angle: 7° Plate form: Rhombic 80° Size designation: 06 Thickness designation: 02 Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: E47 Application group: steel (ISO P) Format designation: CCMT060204-E47 Execution: T FAQ Is this insert suitable for steel turning operations? The insert is designed for ISO P materials; the WPP20G grade and Tiger·tec Gold technology make it suitable for a wide range of steel turning tasks. What does the E47 chipbreaker provide? The E47 chipbreaker delivers controlled chip formation when machining steel, improving chip evacuation and reducing machine interruptions for the CCMT060204-E47 WPP20G insert. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius balances dimensional control and surface quality, supporting consistent finishes while limiting cutting forces during general turning passes. Which insert designation should be ordered to match this product? Order using the ISO designation CCMT060204-E47 WPP20G or the SKU CCMT060204-E47-WPP20G-WALTER to ensure the correct grade and chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The offered item is original, factory-new goods of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com