CCGT120408-FN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, proven WN10 uncoated carbide and a controlled FN2 chipbreaker for consistent production performance; order this insert directly via Metav Werkzeuge or consult the specialists for application-specific guidance. CCGT120408-FN2 WN10 – Indexable Insert (Rhombus 80°, 7° clearance) by Walter Tools The CCGT120408-FN2 WN10 is an indexable insert for drilling, boring and turning applications, designed to deliver stable chip control and reliable edge life in general machining tasks. Rhombic 80° geometry for versatile engagement 7° clearance angle for secure cutting action 0.8 mm corner radius for reliable edge strength FN2 chipbreaker for controlled chip formation Productive cutting with repeatable results The insert delivers predictable cutting performance through its defined geometry and chip control elements. The Rhombus 80° shape combines approach flexibility with a secure seating angle, while the FN2 chipbreaker promotes stable chip formation in a range of operations. Defined cutting geometry reduces vibration and contributes to a more constant tool life, which in turn supports higher process efficiency and less unplanned downtime on the shop floor. Robust edge design for reliable component finish Thanks to the 0.8 mm corner radius and a 7° clearance, the insert provides improved edge strength and reduced edge chipping during interrupted cuts or heavier feeds. This design helps maintain surface quality and dimensional stability in turned and bored features. For production environments seeking predictable tolerances and fewer reworks, the geometry translates directly into mounting confidence and consistent part appearance. Material class and grade: practical guidance for selection The cutting grade is the Walter WN10 uncoated carbide; it is supplied as an open series for catalogue-dependent applications. The grade is presented for versatile use, but suitability must be verified against the specific material matrix for the intended workpiece. For uncertain material matches or hard-to-machine alloys, consult the product matrix or the technical advisors to align grade and cutting data with the process demands. Simple integration and economic machining The insert’s standardised designation and form factor ease integration into existing toolholders and tool systems. Using a dedicated insert such as this one shortens tool-change times and supports systematic stock management. The combination of a stable chipbreaker and a durable uncoated grade helps to balance cutting performance with economical use, making the component a sensible choice where consistent throughput and low handling complexity are priorities. Practical application tips for the workshop When planning operations, consider the insert’s geometry for approach angles and feed selection: the Rhombus 80° lends itself to moderate overhangs and combined operations, while the corner radius will influence achievable surface finish and allowable feed rates. Check the manufacturer’s product matrix for recommended speeds and feeds for specific materials and always secure the insert in a correctly rated clamping pocket to preserve the seating integrity and repeatability. Contact Metav Werkzeuge today for tailored application advice or to request the specific product matrix for this Walter Tools insert; Metav Werkzeuge consultants are available to support process setup and selection. Technical Data Article number: CCGT120408-FN2-WN10-WALTER Article designation: CCGT120408-FN2 WN10 Manufacturer: Walter Tools Product type: Indexable insert (drilling/boring and turning) Facts Free angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 12 Thickness code: 04 Tolerance class: G Special features Chipbreaker: FN2 Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What operations is this insert suitable for? The insert is intended for drilling, boring and turning operations; the CCGT120408-FN2 WN10 combines a Rhombus 80° form and FN2 chipbreaker for versatile machining tasks. Is the WN10 grade coated or uncoated? The WN10 grade is supplied as an uncoated carbide in the Walter open series; verify the grade’s suitability for specific workpiece materials via the product matrix. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation, reducing entanglement and improving process stability during medium-range cutting conditions. Can this insert be used for stainless or alloyed steels? Material suitability must be checked in the product matrix; the CCGT120408-FN2 WN10 is a versatile grade but confirmation against the intended material is recommended. Which dimensions are critical when selecting a toolholder? Match the insert form (Rhombus 80°), size (12) and thickness code (04) with the toolholder pocket specifications to ensure correct seating and clamping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and belongs to the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only. The offered item is an original, factory-new product of the manufacturer.
CCGT120408-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide WNN10 grade and a precise FN2 chipbreaker for predictable chip control and consistent surface finish; order the insert directly via Metav Werkzeuge or consult the advisers for selection support. CCGT120408-FN2 WNN10 – Turning insert with FN2 chipbreaker (Walter Tools) A versatile coated-carbide turning and boring insert, CCGT120408-FN2 WNN10, with a rhombic 80° form for adaptable toolpaths and stable cutting performance. Coated carbide WNN10 for stable cutting FN2 chipbreaker for reliable chip control Rhombic 80° form for versatile turning 0.8 mm corner radius for fine finishing Increased process reliability through grade and chip control The combination of the WNN10 coated-carbide specification and the FN2 chipbreaker is engineered to deliver consistent cutting behaviour across a broad range of turning operations. Coated carbide provides a balance between wear resistance and toughness; this reduces flank wear and helps maintain dimensional accuracy over longer tool life. The designated chipbreaker actively manages chip formation, which lowers the risk of built-up edge and interrupted cutting, contributing to stable cycle times and fewer secondary operations. Flexible geometry for accurate finishes and diverse toolpaths A rhombic 80° insert form with a 0.8 mm corner radius and a 7° relief angle offers a compromise between approach angles and strength, enabling both axial and radial cuts with predictable small-step finishing passes. The plate size (12) and thickness (04) support secure clamping in standard toolholders while the modest corner radius aids in achieving fine surface quality without sacrificing edge robustness. These geometric choices make the insert suitable for applications that require controlled material removal and repeatable surface results. Practical selection and integration into production This insert belongs to the Walter tools open series and is specified as a coated carbide type; catalogue-dependent material options may be available. The ISO designation and SKU allow compatibility checks against toolholder inventories and process matrices: use the ISO ID when configuring tool assemblies. If material-specific suitability requires confirmation, the product matrix should be consulted to verify the WNN10 grade for the intended workpiece material. For procurement and quick replacement, Metav Werkzeuge can assist with selection, ensuring the insert fits existing holders and cutting strategies. Request a personalised quote or technical advice from Metav Werkzeuge for Walter Tools' coated-carbide inserts and ensure the right grade and geometry are chosen for the application; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT120408-FN2-WNN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120408-FN2 WNN10 Walter Tools Brand: Walter Tools Designation: CCGT120408-FN2 WNN10 Numbers / Core technical data Plate size: 12 Thickness: 04 Corner radius: 0.8 mm Relief angle: 7° Tolerance class: G Designs / Special features Shape: Rhombus 80° Chipbreaker: FN2 Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Katalogabhängig FAQ What materials is this insert suitable for? The suitability of the insert depends on the specific application matrix; the CCGT120408-FN2 WNN10 is a coated-carbide grade intended for a broad range of turning operations, but material compatibility should be checked in the product matrix. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on this Walter Tools insert promotes consistent chip shape and evacuation, reducing the likelihood of built-up edge and supporting stable cutting conditions during general turning and boring. Which toolholders are compatible with the rhombic 80° form? Standard toolholders designed for rhombic 80° inserts will accept the CCGT120408-FN2 WNN10; verify seat type and clamping dimensions against the ISO designation to ensure secure mounting. What finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius typically produces finer surface finishes than larger radii while maintaining edge strength, making it suitable for finishing passes where dimensional accuracy and surface quality are required. Is this insert part of a larger series with alternative grades? Yes, this item is listed in the Walter open series; alternative grades and catalogue-dependent options are available—consult Metav Werkzeuge or the product matrix for grade selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names belong to their respective owners. Product names and trademarks are used solely for explanation; there is no affiliation between our company and the referenced brands. The item offered is original, factory-new merchandise from the manufacturer.
CCGT120408-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating and the WKK20S grade delivers reliable abrasive-wear resistance and consistent edge life for cast-iron production. The MK4 chipbreaker and a 0.8 mm corner radius provide stable chip formation and robust cutting edges, supporting dependable throughput. Order directly via Metav Werkzeuge or request tailored application advice from our consultants. Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120408-MK4 WKK20S – for cast iron, Walter Tools The CCGT120408-MK4 WKK20S is a rhombic 80° indexable insert engineered for efficient machining of cast-iron components in production and repair workshops. Optimised for cast iron machining Tiger‑tec Silver coated grade MK4 chipbreaker for stable chips 0.8 mm corner radius for edge strength Higher throughput on abrasive cast-iron jobs The combination of the WKK20S grade and Tiger‑tec Silver coating is tailored to cope with the abrasive nature of cast iron. This means longer useful edge life under cyclic loading and frequent interruptions typical of cast-iron workpieces. The insert’s construction reduces the rate of flank and crater wear, which translates into fewer tool changes and improved machine uptime. For operations where process stability and predictable tool life matter, this insert supports a more economical production rhythm. Controlled chips and secure cutting edge The MK4 chipbreaker is designed for controlled, short chips when machining brittle materials, lowering the risk of chip jamming and improving surface quality. Alongside a 0.8 mm corner radius, the geometry stabilises the cutting edge under intermittent cuts and interrupted surfaces. These features reduce vibration and promote consistent dimensional results, helping to uphold tight tolerances without excessive finishing passes. The result is a reliable balance between material removal rate and component quality. Geometry that supports accuracy and flexibility The rhombic 80° form provides a positive cutting entry and good engagement for a variety of turning operations, while the 7° relief angle facilitates smooth surface generation on uneven cast-iron faces. The insert’s profile and thickness code support secure clamping in standard toolholders and maintain positional accuracy during repeated indexing. Explained simply: the geometry reduces deformation and ensures repeatable tool positioning, which benefits serial production and regrinding schedules. Selection and application guidance for machine shops This insert is intended primarily for machining cast iron; its material designation and chipbreaker are optimised for that group according to ISO classification. When integrating the insert into a process, match cutting data to the machine’s rigidity and the workpiece condition: the coated grade favours moderate to high cutting speeds typical for cast-iron machining. If there is any uncertainty about compatibility with a specific setup, Metav Werkzeuge can advise on cutting parameters and holder selection to achieve the best balance of productivity and tool life. Request tailored application advice or a delivery quote from Metav Werkzeuge for the Walter Tools CCGT120408-MK4 WKK20S insert to optimise cast-iron machining performance Technical data SKU: CCGT120408-MK4-WKK20S-WALTER Designation: CCGT120408-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Core dimensions Plate size: 12 mm Thickness code: 04 Relief angle: 7° Corner radius: 0.8 mm Special features Grade: WKK20S Chipbreaker: MK4 Shape: Rhombus 80° Tolerance class: G Execution: T Material application: cast iron FAQ What materials is this insert designed to machine? The insert is engineered for machining cast iron; the WKK20S grade and Tiger‑tec Silver coating are matched to the abrasive and breakable-chip behaviour of cast-iron materials. How does the MK4 chipbreaker influence cutting performance? The MK4 chipbreaker promotes short, controlled chips on brittle materials, improving chip evacuation and reducing the chance of chip entanglement during turning operations. What does the 0.8 mm corner radius mean for edge life? A 0.8 mm corner radius increases the strength of the cutting edge, improving resistance to chipping during interrupted cuts and contributing to longer, more predictable tool life. Is this insert compatible with standard toolholders? The insert follows common indexable-insert dimensions (CCGT120408) and can be used in compatible toolholders designed for rhombic 80° inserts; holder selection should ensure correct clamping for the insert thickness code. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods of the manufacturer (Walter Tools).
CCGT120408-MM4 WSM20S MM4 Wendeplatten - Walter Tools
High thermal stability and reliable chip control make this insert ideal for machining stainless steel and heat-resistant alloys. Benefit from the Tiger·tec Silver wear resistance, the MM4 chipbreaker for consistent swarf formation and the stable Rhombic 80° geometry to increase uptime. Order the CCGT120408-MM4 WSM20S directly via Metav Werkzeuge or consult our specialists for tailored machining recommendations. CCGT120408-MM4 WSM20S — Rhombic 80° indexable insert for stainless steel and superalloys — Walter Tools The CCGT120408-MM4 WSM20S is an indexable cutting insert engineered for demanding turning and boring operations, optimised for stainless steel and heat‑resistant superalloys and finished with a Tiger·tec Silver coating. Tiger·tec Silver coating for enhanced wear resistance Optimised MM4 chipbreaker for reliable chip control Rhombic 80° form with 0.8 mm corner radius 7° clearance and 4 mm thickness for stable cutting Designed for demanding materials to maintain throughput The insert’s WSM20S grade, part of the Tiger·tec Silver family, targets tough-to-machine alloys such as stainless steel and nickel‑based superalloys. The combination of a coated carbide substrate and a purpose‑tuned grade improves thermal resistance and reduces tendency to build up material on the cutting edge. For workshops processing high volumes of difficult parts, this means fewer interruptions for edge changes and a more predictable machining cycle time, supporting higher overall productivity. Precision geometry and chip control for safer cycles A Rhombic 80° form with a 0.8 mm corner radius and MM4 chipbreaker provides controlled swarf formation and stable cutting forces. The 7° clearance reduces flank rubbing and heat generation at the edge, while the 4 mm thickness enhances insert rigidity under interruption or variable engagement depths. These geometric and chip control features translate into consistent component quality and reduced incidence of chatter or surface defects when turning complex profiles. Durability and process security in everyday production The coated hardmetal construction and the Tiger·tec Silver technology deliver extended tool life under elevated temperatures and abrasive conditions typical for stainless steel and heat‑resistant alloys. The insert supports repeatable edge-life across batches, which simplifies tool management and reduces the need for frequent requalification. For manufacturing environments where component tolerances and surface finish are critical, the insert helps safeguard process stability and lowers the risk of scrap. For machining stainless steel and superalloys with reliable performance, contact Metav Werkzeuge to discuss the Walter Tools CCGT120408-MM4 WSM20S and receive application-specific cutting data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: CCGT120408-MM4-WSM20S-WALTER Designation: CCGT120408-MM4 WSM20S Series: Tiger·tec Silver Manufacturer: Walter Tools Numbers / Core technical data Insert size: 12 Thickness: 4 mm Clearance angle: 7° Corner radius: 0.8 mm Form: Rhombic 80° Chipbreaker: MM4 Tolerance class: G Designs / Special features Coating: Tiger·tec Silver (coated carbide) Grade: WSM20S Suitable for: stainless steel Suitable for: superalloys and titanium alloys Application focus: turning and boring operations Robust edge for interrupted cuts and elevated temperatures FAQ Is this insert suitable for stainless steel? Yes. The CCGT120408-MM4 WSM20S grade and Tiger·tec Silver coating are designed specifically to handle stainless steel, offering improved thermal stability and controlled swarf behaviour. Can the insert be used for nickel‑based superalloys? Yes. The WSM20S grade supports machining of heat‑resistant superalloys thanks to its coating and grade composition, which prioritise edge stability under poor thermal conductivity conditions. What benefits does the MM4 chipbreaker provide? The MM4 chipbreaker optimises chip formation and evacuation, reducing the risk of tangling and enabling safer, more consistent cycles when cutting difficult materials. Which toolholders and operations match the Rhombic 80° form? The Rhombic 80° form is widely compatible with standard turning and boring toolholders designed for negative‑geometry inserts; it offers flexible approach angles for a variety of external and internal turning tasks. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
CCGT120408-MN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of predictable performance and robust edge life provided by the WN10 uncoated carbide grade and the MN2 chipbreaker; order the CCGT120408-MN2 WN10 inserts directly via Metav Werkzeuge or request application advice from the consultants. CCGT120408-MN2 WN10 — Indexable insert for drilling/boring and turning, rhombic 80°, 7° relief (Walter Tools) The CCGT120408-MN2 WN10 is an uncoated carbide indexable insert engineered for multi-process use in drilling, boring and turning where controlled chip formation and reliable edge performance are essential *Uncoated carbide grade WN10 *Rhombic 80° geometry, 7° relief *MN2 chipbreaker for stable chips *0.8 mm corner radius, thickness code 04 Consistent chip control for uninterrupted production The combination of the WN10 uncoated carbide and the MN2 chipbreaker is designed to promote steady, manageable chips during interrupted cuts and mixed operations. This mechanical pairing supports process reliability by reducing unpredictable chip flow, which in turn minimises unplanned stoppages and tool handling. The result is a more continuous workflow with fewer interventions for chip removal. Robust edge life through optimised geometry A rhombic 80° shape with a 7° relief and a 0.8 mm corner radius delivers enhanced edge strength where it matters. The geometry reduces peak loads on the cutting edge while maintaining effective cutting engagement, which contributes to edge stability and reproducible results across insert indexings. For production settings that value repeatability, this geometry lowers the frequency of edge-related rework. Easy integration into standard tool holders and stock systems As an indexable insert, this component follows established industry dimensions and the common thickness code 04, allowing seamless replacement in compatible holders and standard inventory processes. The standardised form factor simplifies logistics and reduces setup time during insert changes, making it a pragmatic choice for workshops seeking straightforward tool management without lengthy adjustments. Economical, predictable performance for production runs Built as an uncoated carbide grade from the Walter range, the insert is aimed at providing a predictable service life under well-matched cutting conditions. When combined with the MN2 chip control and the proven geometry, the component offers a cost-effective solution for repetitive tasks that demand dependable behaviour rather than specialised coatings. For applications where coating is unnecessary or where coolant and cutting parameters are chosen to suit uncoated grades, this insert can provide consistent results and lower total operating complexity. Contact Metav Werkzeuge for tailored application guidance and stock information on Walter Tools CCGT120408-MN2 WN10 inserts; Metav Werkzeuge can advise on holder compatibility and delivery options Technical data Article number / SKU: CCGT120408-MN2-WN10-WALTER Designation: CCGT120408-MN2 WN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Chipbreaker: MN2 Facts Corner radius: 0.8 mm Free angle / relief: 7° Plate shape: Rhombus 80° Plate size: 12 mm Thickness code: 04 Tolerance class: G Special features Uncoated carbide grade WN10 MN2 chipbreaker for controlled chips Execution: T Material specification: catalogue-dependent FAQ What materials is this insert intended for? Material suitability should be checked against the product matrix; the CCGT120408-MN2 WN10 is an uncoated carbide insert and its suitability depends on the specific workpiece material and cutting parameters Can the insert be used for both drilling and turning operations? Yes, the CCGT120408-MN2 WN10 is specified as an indexable insert for drilling/boring and turning applications and is designed to function in mixed-process environments How does the MN2 chipbreaker help in production? The MN2 chipbreaker promotes predictable chip formation, which reduces interruptions from long or tangled chips and supports continuous machining processes Is this insert compatible with standard tool holders? The geometry and thickness code follow common industry conventions; holders matching the rhombic 80° form and the thickness code 04 are required for proper fitment What is the expected benefit of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and improves resistance to mechanical shock, which helps maintain stability on indexable edges during cyclic loads Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any affiliation or endorsement. The offered item is an original, factory-new product of the stated manufacturer.
CCGT120408-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of robust coated carbide, precise MN2 chip control and a compact rhombic geometry for consistent productivity; order directly via Metav Werkzeuge or consult the technical team for application matching. CCGT120408-MN2 WNN10 / CCGT120408-MN2 WNN10 / WNN10 Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte — Walter Tools CCGT120408-MN2 WNN10 is a rhombic 80° indexable insert designed for drilling, boring and turning operations, optimised for controlled chip formation and repeatable cutting performance. Coated carbide grade WNN10 for robustness Rhombic 80° geometry for versatile cutting 0.8 mm corner radius for fine finishing 7° clearance angle for secure chip evacuation High productivity through targeted chip control The combination of the MN2 chipbreaker and the WNN10 coated carbide grade delivers reliable chip formation across a range of machining tasks. The chip control geometry is designed so that chips are guided away from the cutting edge, reducing the risk of re-cutting and improving cycle stability. This behaviour is particularly advantageous in mixed operations where turning and boring are performed consecutively, as the insert performance has been optimised to maintain consistent cutting forces and predictable tool life. Precise geometry for surface quality and repeatability The rhombic 80° shape with a 0.8 mm corner radius and a 7° clearance angle supports fine finishing while retaining robustness for medium-depth cuts. A small corner radius improves surface finish and reduces vibration when smaller allowances are machined, whereas the clearance angle helps prevent rubbing and minimises heat build-up at the flank. The compact plate profile and the specified tolerance class ensure repeatable seat and indexing behaviour, which benefits setups where rapid tool changes and minimal rework are required. Flexible specification and catalogue-based material options The insert is supplied in the Walter Schneidstoffsorte - Serie offen and the exact substrate/coating combination is catalog-dependent, allowing selection to match specific application demands. The plate thickness 04 and insert size 12 are standardised dimensions that facilitate integration with common toolholders for drilling, boring and turning operations. Where material compatibility must be verified, the substrate and coating details should be checked in the technical matrix to confirm suitability for the intended workpiece materials and cutting conditions. Contact Metav Werkzeuge for application advice on the Walter Tools CCGT120408-MN2 WNN10 insert and to arrange supply — specialist support is available by phone or email. Technical Data SKU: CCGT120408-MN2-WNN10-WALTER Article: CCGT120408-MN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Facts Shape: Rhombic 80° Clearance angle: 7° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Tolerance class: G Special features Carbide grade: WNN10 (coated carbide) Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Katalogabhängig ISO designation: CCGT120408-MN2 WNN10 FAQ What types of machining is this insert suited for? The insert is designed for drilling, boring and turning applications; the MN2 chipbreaker supports stable chip formation during mixed machining tasks with the CCGT120408-MN2 WNN10 insert from Walter Tools. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker on the CCGT120408-MN2 insert reduces chip entanglement and promotes controlled evacuation, which in turn increases process reliability and can extend effective tool life. Is the WNN10 grade suitable for high-speed cuts? WNN10 is a coated carbide grade intended for robust performance; catalogue specifications should be consulted to confirm suitability for specific high-speed parameters with the CCGT120408-MN2 WNN10 insert. Can this insert be used for finishing operations? Yes, the 0.8 mm corner radius and rhombic 80° geometry of the insert support fine finishing when set up with appropriate cutting parameters and stable clamping. How is replacement and indexing managed for this insert type? The rhombic form and standardised thickness code enable straightforward indexing and replacement in compatible toolholders; tolerance class G ensures consistent seating and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are cited here for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners; the offered article is an original, factory-new product of the stated manufacturer.
CCGT120408-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a precise Rhombus 80° geometry and the MP4 chipbreaker to ensure consistent chip control and extended tool life on steel components; order the insert directly via Metav Werkzeuge or contact our consultants for machining advice. CCGT120408-MP4 WPP10G — Indexable Turning Insert, Tiger·tec Gold, Rhombus 80° | Walter Tools The CCGT120408-MP4 WPP10G is an indexable turning insert engineered for reliable medium-to-finish steel machining where stable chip formation and prolonged tool life are required. Tiger·tec Gold coating for extended tool life Rhombus 80° geometry for versatile turning MP4 chipbreaker for controlled chip formation Optimised for steel machining (ISO P) High wear resistance for repeatable production The coated carbide grade WPP10G from the Tiger·tec Gold family is formulated to provide high wear resistance and stable cutting-edge behaviour when machining steels. Designed for the thermal and mechanical demands of steel cutting, this grade reduces flank wear under sustained operation, which in turn supports longer tool cycles and fewer index changes. The result is improved process stability in high-repetition environments and a clearer cost-per-part calculation through reduced tooling consumption. Performance claims are grounded in the material and coating combination and are expressed in terms of durability and predictable wear behaviour. Geometry that delivers surface quality and versatility The Rhombus 80° insert profile combined with a 0.8 mm corner radius and 7° relief angle offers a balanced compromise between strength and accessibility. The rhombic shape allows a variety of entering angles for different turning strategies, while the modest corner radius supports improved surface finish without sacrificing edge robustness. The MP4 chipbreaker is tuned to generate short, easily controlled chips when cutting typical steels, which simplifies chip evacuation and minimises interruptions. In practice, this geometry enables consistent finishing passes and helps maintain dimensional accuracy across a production run. Productivity gains through controlled chip formation By pairing a tailored chipbreaker with a coated carbide substrate, the insert promotes predictable chip flow and reduced machine downtime. The MP4 breaker reduces the risk of long, entangling chips that can hinder automation or require manual intervention. Coating technology from the Tiger·tec Gold series supports higher cutting parameters and contributes to a lower total tooling cost over time by extending usable edge life. For operations focusing on throughput and repeatability, this combination translates directly into fewer tool changes and steadier cycle times. Application guidance and material compatibility The insert is specified for the ISO P material group, meaning it is optimised for a wide range of steel grades, including unalloyed and alloyed steels where typical heat generation and chip behaviour occur. Selection of cutting speeds, feeds and depth of cut should be aligned with workpiece material and machine rigidity; Metav Werkzeuge can provide recommended starting parameters and tailored advice. For specialised materials or atypical applications, metallurgical data and part geometry should be provided so that the machining strategy can be adapted accordingly. For tailored cutting data or to discuss batch optimisation with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT120408-MP4-WPP10G-WALTER Designation: CCGT120408-MP4 WPP10G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger·tec Gold Core specifications Relief angle: 7° Corner radius: 0.8 mm Plate size: 12 mm Plate shape: Rhombus 80° Plate thickness code: 04 Special features Grade: WPP10G (coated carbide) Chipbreaker: MP4 Suitable material group: Steel (ISO P) Execution: T Tolerance class: G FAQ Which materials is this insert intended for? The CCGT120408-MP4 WPP10G is optimised for the ISO P group, i.e. a broad range of steel types including unalloyed and alloyed steels. What benefit does the Tiger·tec Gold grade provide? Tiger·tec Gold coating on the WPP10G grade improves wear resistance and edge stability, extending tool life and supporting higher cutting parameters in steel machining. How does the Rhombus 80° shape affect machining options? Rhombus 80° geometry enables multiple entering angles for turning, offering flexibility between roughing and finishing while maintaining strength at the cutting edge. When is the MP4 chipbreaker recommended? The MP4 chipbreaker is suitable where controlled chip segmentation is required for steel turning, reducing long-chip issues and aiding reliable chip evacuation. Is the insert suitable for automated production runs? Yes, the combination of WPP10G grade, Tiger·tec Gold coating and the MP4 breaker supports predictable wear and chip behaviour, attributes valuable for automated and high-volume production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are quoted solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer Walter Tools.
CCGT120408-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating, a precise rhombic 80° geometry and the MP4 chipbreaker for consistent performance when machining steel; order directly via Metav Werkzeuge or request tailored advice from our consultants. Bohr-/Aufbohrwendeschneidplatte CCGT120408-MP4 WPP20G for Steel (Walter Tools) — Tiger‑tec Gold, Rhombic 80° The CCGT120408-MP4 WPP20G is an indexable insert engineered for high-productivity drilling, boring and turning in steel, offering a balance of wear resistance and reliable chip control for industrial metalcutting applications. Tiger‑tec Gold coating for extended tool life Optimised MP4 chipbreaker for consistent chips Rhombic 80° geometry, 7° clearance Greater uptime through high-performance coating and substrate The combination of the Tiger‑tec Gold coating and the WPP20G coated carbide grade provides noticeably improved wear resistance and a stable cutting edge in demanding steel applications. Coating technology reduces flank wear and minimises notch formation during interrupted cuts, which translates into fewer index changes and longer tool life. For production environments this means more consistent cycle times and lower tooling replacement frequency. The coated carbide substrate is tuned to handle the heat and abrasive conditions typical when machining unalloyed and alloyed steel, supporting efficient, repeatable results. Reliable chip control and geometry for predictable finishes The insert’s MP4 chipbreaker and rhombic 80° form are designed to produce controlled chip flow and stable cutting forces, aiding surface finish and dimensional consistency. A 0.8 mm corner radius increases edge strength and reduces vibration on interrupted or heavy cuts, while the 7° clearance prevents rubbing and supports effective shear formation. These geometric choices help reduce the likelihood of edge chipping and improve process security, which is particularly valuable for series production where repeatability and part quality are essential. Practical application and handling benefits in workshop use Designed specifically for the ISO P material group, the insert is suitable for a wide range of steel turning and boring tasks, addressing the common heat and chip formation behaviours encountered in these materials. The CCGT120408-MP4 WPP20G offers straightforward indexability and compatibility with standard Walter toolholders, enabling fast changeover and minimal downtime. For operations seeking a balance between productivity and surface quality, this grade delivers consistent performance across varying feed rates and depths of cut, supporting both batch and continuous manufacturing settings. Contact Metav Werkzeuge for expert recommendations on Walter Tools Tiger‑tec Gold inserts and to arrange supply or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCGT120408-MP4-WPP20G-WALTER Designation: CCGT120408-MP4 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger‑tec Gold Grade: WPP20G Tolerance class: G Execution: T Facts Size: 12 Plate thickness: 04 Clearance angle: 7° Corner radius: 0.8 mm Shape: Rhombic 80° Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: MP4 Material group: P (steel) Application focus: Steel machining (ISO group P) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert is specified for steel (ISO group P); the WPP20G grade and Tiger‑tec Gold coating make it well suited to both unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning and drilling operations. What are the geometric advantages of the rhombic 80° shape? Rhombic 80° geometry offers versatility in entry angles and turning operations, providing a combination of strength and accessibility for shoulder and profile cuts. Is the corner radius suitable for heavy cuts? The 0.8 mm corner radius increases edge robustness and helps absorb load peaks, making the insert appropriate for interrupted and heavier cuts where a stronger cutting edge is required. Which product references should be used when ordering or enquiring? Reference the designation CCGT120408-MP4 WPP20G and the SKU CCGT120408-MP4-WPP20G-WALTER for clear identification. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCGW060202EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance, precise geometry and reliable chip control for consistent production results; request availability via Metav Werkzeuge or contact our advisers for application support. CCGW060202EM-2 WBS10 — CBN Grade Indexable Insert, 7° clearance (Walter Tools) The CCGW060202EM-2 WBS10 is an indexable cutting insert designed for wear‑resistant turning and boring tasks, optimised for hardened steels and demanding, high‑temperature alloys. CBN grade WBS10 for hardened materials Rhombic 80° shape for flexible mounting 7° clearance angle for positive cutting action 0.2 mm corner radius for fine surface finish Longer tool life through CBN performance The insert uses a CBN‑based grade (WBS10) that is engineered for wear‑resistant machining of hardened components. The advantage is clear: fewer tool changes and longer tool life, which reduces machine downtime and overall production cost per component. The substrate and grade are selected to maintain a stable cutting edge at elevated temperatures typical of hard turning, delivering more consistent tool wear and predictable tool change intervals. The modest 7° clearance supports a positive cutting action that lessens rubbing on the flank, helping to preserve dimensional stability across series production. Precise geometry for consistent surface quality A Rhombus 80° form with a small 0.2 mm corner radius provides a reliable compromise between edge strength and surface finish, making the insert suitable where fine tolerances and repeatable results matter. The insert’s size code and thickness are compatible with standard clamping systems used in finish and semi‑finish turning operations, while the integrated chipbreaker (type 2) assists in producing manageable chips in interrupted cuts and difficult materials. The combination of geometry and chip control supports high process stability and helps achieve a consistent surface quality with reduced rework rates. Process guidance and application fit The insert belongs to the Walter CBN / Hartstoff series and is a specialist solution for hardened steels; depending on the exact grade matrix, it can also be appropriate for certain cast materials or superalloys. Material suitability should be verified against the product matrix when selecting the grade for a specific workpiece. For customers seeking process security, the WBS10 grade offers stable chip formation and predictable wear behaviour, which supports higher productivity and repeatable part tolerances. If additional technical data or matching recommendations are required, Metav Werkzeuge provides application support and can advise on the correct grade and clamping system for the intended machining task. Contact Metav Werkzeuge for application advice and availability of the Walter Tools CCGW060202EM-2 WBS10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGW060202EM-2-WBS10-WALTER Designation: CCGW060202EM-2 WBS10 Series: Walter CBN / Hartstoff Grade: WBS10 Shape: Rhombus 80° Size: 06 Thickness code: 02 Clearance angle: 7° Corner radius: 0.2 Chipbreaker: 2 Tolerance class: G Execution: W Material: Katalogabhängig Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Chipbreaker type: 2 Size code: 06 Thickness code: 02 Tolerance class: G Special features / Applications CBN grade optimised for hardened steels and wear‑resistant tasks Part of Walter CBN / Hartstoff series Stable chip formation and predictable wear behaviour Suited for hard turning and demanding finishing cuts (grade‑dependent) Check product matrix for exact material suitability FAQ What materials is this insert designed to machine? The CCGW060202EM-2 WBS10 insert is a CBN grade intended primarily for hardened steels; depending on the product matrix, the grade can also be used for certain cast materials or superalloys. How does the 0.2 mm corner radius affect part quality? A 0.2 mm radius gives a balance between edge strength and surface finish, enabling reliable dimensional control and reduced risk of edge chipping on the WBS10 grade. Which operations suit this insert best? The insert is suitable for finish and semi‑finish turning and boring where wear resistance and consistent surface quality are required; the Rhombus 80° shape enables flexible clamping positions. Is there guidance for selecting the correct grade for a specific workpiece? Yes — the Walter CBN / Hartstoff series provides grade‑specific recommendations; consult the product matrix or contact Metav Werkzeuge for tailored advice on grade selection for the intended material. What are the main benefits of choosing a CBN insert over carbide for hardened parts? CBN inserts such as WBS10 maintain cutting edge stability at higher temperatures and produce more predictable wear patterns, which typically allow longer tool life and improved process repeatability in hard turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
CCGW060202FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Stable machining with high wear resistance from PKD and precise geometry ensures consistent finishes; the 7° relief angle and 0.2 mm corner radius support reliable cutting and repeatable part quality. Order the CCGW060202FS-1 WDN10 insert directly via Metav Werkzeuge or ask the consultants for application guidance. CCGW060202FS-1 WDN10 indexable insert, PKD grade, Rhombus 80° — Walter Tools the CCGW060202FS-1 WDN10 is a rhombic 80° indexable insert in a PKD grade designed for demanding machining of non‑ferrous and abrasive non‑ferrous materials, combining wear resistance with fine surface control PKD grade for abrasive non-ferrous materials Rhombus 80° geometry for versatile turning 7° relief angle for dependable cutting 0.2 mm corner radius for fine surface finish Size 06 insert for standard toolholders Durable, wear‑resistant cutting for abrasive non‑ferrous workpieces The polycrystalline diamond grade delivers exceptional wear resistance when machining abrasive, non‑ferrous materials such as aluminium alloys with reinforcing particles, graphite‑filled plastics or other challenging composites. The PKD (polycrystalline diamond) structure provides a hard, abrasion‑resistant cutting edge that sustains dimensional accuracy over longer tool life, reducing the need for frequent index changes and contributing to a more productive machining cycle. For best results, material‑to‑grade matching should be checked against the manufacturer’s product matrix. Geometry that stabilises chip formation and surface quality The rhombic 80° geometry in combination with a 7° relief angle and a 0.2 mm corner radius gives a balance between cutting strength and surface finish. The shape supports controlled engagement angles, while the modest corner radius helps to produce a consistent surface texture without compromising edge strength. An integrated chipbreaker profile assists reliable chip control in typical feed ranges, lowering the risk of built‑up edge and minimising secondary finishing work on the component. Practical compatibility and predictable process outcomes Supplied in a Size 06 form factor with thickness code 02 and tolerance class G, the insert harmonises with standard toolholders and machine setups for turning and certain boring applications. The designation WDN10 denotes the Walter material series and indicates this insert’s suitability within the Walter Schneidstoffsorte line; the series is intended for high process stability and consistent results. Where machining of steels or stainless grades is a consideration, reference the product matrix — this insert is optimised for non‑ferrous and abrasive non‑ferrous applications to ensure reliable performance. For precise, wear‑resistant performance with the Walter Tools PKD grade insert, contact Metav Werkzeuge for application support and availability. Technical Data Article number: CCGW060202FS-1-WDN10-WALTER ISO designation: CCGW060202FS-1 WDN10 Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness code: 02 Tolerance class: G Materials & features Grade: PKD (polycrystalline diamond) Plate form: Rhombus 80° Chipbreaker: 1 Series: Walter Schneidstoffsorte - Serie offen Sort: WDN10 Execution: W Recommended application: Non‑ferrous and abrasive, non‑ferrous materials; verify with product matrix FAQ Which materials is this insert intended for? The CCGW060202FS-1 WDN10 insert is intended primarily for non‑ferrous and abrasive non‑ferrous materials; the PKD grade is especially suited to abrasive aluminium alloys, graphite‑filled plastics and similar materials, but the product matrix should be consulted for specific workpiece types. What does PKD mean in practice for machining? PKD (polycrystalline diamond) provides a very hard, wear‑resistant cutting edge that maintains geometry under abrasive conditions, resulting in longer tool life and stable dimensional accuracy when using the CCGW060202FS-1 WDN10. How does the geometry affect surface finish? The Rhombus 80° geometry combined with a 0.2 mm corner radius and 7° relief angle supports controlled cutting forces and stable chip flow, which together help to produce a consistent surface finish and reduce post‑process polishing. Is this insert compatible with standard holders? The Size 06 format and standard ISO designation ensure compatibility with conventional toolholders designed for CCGW‑style inserts; verify holder specifications and mounting parameters before use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and identification purposes. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CCGW060202TM-2 WBH20C Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, a compact rhombic geometry and precise edge preparation for efficient hard-part turning. Order the CCGW060202TM-2 WBH20C insert via Metav Werkzeuge or request application advice from our consultants. CCGW060202TM-2 WBH20C indexable insert — CBN grade for hard machining — Walter Tools CCGW060202TM-2 WBH20C is a CBN indexable insert engineered for the hard machining of heat-treated components, offering a balance of wear resistance and surface integrity in finishing and semi-finishing turning operations. *CBN grade for hard turning applications *Rhombic 80° shape for versatile cutting positions *0.2 mm corner radius for fine surface finish *7° relief angle to lower cutting forces Exceptional wear resistance for hardened components The CBN composition of the WBH20C grade provides markedly improved wear behaviour when machining hardened steels and similarly demanding materials. CBN is a superabrasive specifically designed to withstand high contact temperatures and abrasive wear; this results in extended tool life under the elevated loads typical of hard turning. The result is predictable performance and fewer tool changes, which supports steady production and reduces downtime. Geometry designed for stability and surface quality The rhombic 80° form delivers flexible cutting orientations and stable engagement in both finishing and light roughing passes. A 0.2 mm corner radius helps to produce a fine surface finish while maintaining an acceptable edge strength for interrupted cuts or small variations in depth of cut. The moderate 7° relief angle reduces friction at the flank face, promoting consistent chip flow and avoiding premature edge deterioration. Together, these geometric choices translate technical features into practical benefits: improved surface integrity and repeatable component tolerances. Process reliability and economical machining The coated CBN grade and the insert’s geometry contribute to process reliability by maintaining edge integrity under thermal and mechanical stress. For production environments where repeatability and low scrap rates are critical, the insert supports predictable wear patterns and stable cutting forces. This stability can shorten set-up times and simplify tool management, producing a favourable cost-in-use profile for companies machining hardened shafts, bearing seats or case-hardened components. Practical application notes and handling guidance This indexable insert is suited to hard turning and finishing of hardened steels and other wear‑resistant materials where CBN is indicated. For best results, integrate the insert into a rigid toolholder and maintain stable machine conditions to exploit its wear resistance. Routine visual checks for edge rounding and chip pattern are recommended to time indexations efficiently and to sustain component quality. Spare inserts of the same specification ensure reproducible results when quick replacement is required. For tailored application support and availability of the Walter Tools CCGW060202TM-2 WBH20C insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and ordering guidance. Technical data Article number: CCGW060202TM-2-WBH20C-WALTER Designation: CCGW060202TM-2 WBH20C Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Facts Relief angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Thickness code: 02 Chipbreaker: 2 Special features Coating / grade: WBH20C (coated CBN grade) Material application: hardened steels (H) Suitable for: hard machining and finishing Stable wear behaviour and optimised chip control FAQ What materials is this insert intended for? The CCGW060202TM-2 WBH20C insert is intended primarily for hardened steels and similar high‑wear materials where a CBN grade is appropriate. How does the rhombic 80° shape affect application? The rhombic 80° geometry of this insert provides versatile cutting positions and stable engagement, allowing reliable finishing and light roughing passes with maintained surface quality. What benefit does the 0.2 mm corner radius provide? A 0.2 mm corner radius balances edge strength and surface finish, supporting fine finishes while offering resistance to minor edge overloads in interrupted cuts. Is this insert suitable for continuous production runs? Yes, the coated CBN grade and consistent geometry are designed to deliver repeatable performance and longer tool life, making it suitable for continuous hard‑part machining. Can the WBH20C grade be used on cast or superalloy materials? WBH20C is optimised for hard materials; suitability for cast irons or superalloys depends on specific alloy characteristics and should be validated in application testing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The offered article is an original, factory-new product of the respective manufacturer. Walter Tools is a recognised provider of precision tooling, noted for process stability and consistent results.
CCGW060202TS-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting performance, precise 7° clearance and robust rhombic 80° geometry for consistent hard-machining results; order the insert directly via Metav Werkzeuge or consult the Metav advisers for application support. CCGW060202TS-2 WBH10 – CCGW rhombic 80° indexable insert, CBN grade for hardened steel | Walter Tools CCGW060202TS-2 WBH10 is an indexable insert engineered for hard turning and boring operations, offering a CBN cutting grade tailored to high-wear applications in hardened steels. CBN grade WBH10 for hard materials Rhombic 80° geometry for versatile cutting 7° clearance angle for reduced cutting forces 0.2 mm corner radius for improved edge strength Consistent hard-machining performance with CBN The combination of CBN technology and the WBH10 grade delivers a high resistance to abrasive wear, which is especially relevant when machining hardened steels. The insert’s rhombic 80° geometry gives flexibility across drilling, boring and turning setups while the 7° clearance helps to keep cutting forces lower and thermal loading more predictable. For production environments where tool life and process reliability determine cycle times, this specification supports a steady output with fewer unscheduled tool changes. Stable edge life and surface quality through geometry and radius A 0.2 mm corner radius contributes to a stronger cutting edge and helps produce a controlled surface finish in finishing and semi-finishing passes. The insert thickness and format ensure stable clamping in standard indexable holders, and the tolerance class G supports repeatable positioning across tool changes. Where tight component tolerances are required, the geometry and material pairing reduce the risk of premature edge failure and make the machining window more reliable. Application guidance and machining advantages Designed for the Walter CBN series, the grade is optimised for work in group H materials per ISO 513, meaning it is a specialist solution for hardened and pre-hardened components. The insert’s chipbreaker and geometry aim to balance process stability and surface integrity rather than high-volume chip evacuation in soft materials. This results in a rational choice for operations where wear resistance and consistent dimension control pay back through reduced rework and steadier production yields. Contact Metav Werkzeuge for tailored advice on Walter Tools CCGW060202TS-2 WBH10 CBN inserts and to discuss the best machining strategy for hardened-steel applications Technical Data Article number / SKU: CCGW060202TS-2-WBH10-WALTER Designation: CCGW060202TS-2 WBH10 Product type: Drill/boring and turning indexable insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: G Chipbreaker: 2 Special features Series: Walter CBN / Hartstoff Grade: WBH10 (CBN cutting material) Material application: hardened steels (ISO group H) Suited for hard machining and finish operations FAQ What materials is this insert suited for? The insert is specified for machining hardened steels (ISO group H); the WBH10 CBN grade is optimised for high-wear, hard-turning tasks. How does the 7° clearance affect machining? A 7° clearance angle reduces rubbing and cutting forces, improving thermal stability and helping to maintain consistent edge life when machining hard materials. Which geometry benefits are provided by the rhombic 80° shape? The rhombic 80° form offers versatility for both turning and boring orientations, allowing flexible approach angles and a balanced compromise between strength and accessibility. Is the insert suitable for finish passes? Yes; the 0.2 mm corner radius strengthens the edge and supports good surface quality in finishing and semi-finishing operations on hardened components. Who supplies technical advice for this Walter Tools insert? Technical and application advice is available from Metav Werkzeuge, who can assist with machining parameters and toolholder selection for the CCGW060202TS-2 WBH10 insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only; there is no affiliation between our company and the trademark owners. The offered article is an original, brand-new product from the manufacturer Walter Tools.
CCGW060202TS-2 WBH10C Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance from the CBN grade and precise geometry for consistent performance in hard-part machining; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCGW060202TS-2 WBH10C – Drilling and Turning Indexable Insert, CBN Grade, 7° Clearance | Walter Tools A versatile CCGW060202TS-2 WBH10C indexable insert designed for hard-material turning and bore machining, optimised for hardened steels and pre-hardened components. CBN grade WBH10C for hard materials 7° clearance for secure chip control Rhombic 80° shape, 0.2 mm corner radius Designed for hardened steel (ISO H) machining Maximise productivity on hardened components The coated CBN cutting material of the insert delivers significantly improved wear resistance when machining hardened steels, enabling longer uninterrupted cutting times and fewer tool changes. Because CBN retains edge stability under high temperatures and abrasive conditions, cycle times are reduced while dimensional consistency is maintained. This benefit is particularly relevant in high-volume or repeat production of hardened parts where tool life and predictable performance directly affect throughput. Consistent chip control and process reliability With a 7° clearance and an integrated chipbreaker type 2, the geometry promotes controlled chip formation and evacuation during both drilling and turning tasks. Controlled chips reduce the risk of workpiece damage and improve surface integrity, which in turn lowers rework rates. The insert’s wear-resistant grade supports a stable cutting edge under the high contact pressures encountered in hard-part machining, providing a measurable improvement in process reliability and repeatability. Precision geometry for tight dimensional tolerances The rhombic 80° shape coupled with a 0.2 mm corner radius offers a balance between strength at the cutting edge and the ability to achieve fine surface finishes. The insert size designation and thickness are optimised for clearance and rigidity, delivering predictable engagement and minimal deflection during heavy-duty cuts. This geometry supports accurate shoulder and profile machining and helps to safeguard finished part tolerances in demanding hard-turning operations. Broad applicability and extended tool life Belonging to the Walter CBN / Hartstoff series and specified as the WBH10C grade, the insert is intended primarily for ISO H (hardened steel) applications and is suitable for pre-hardened steels where wear resistance is essential. The CBN composition and coating strategy are tailored for wear-intensive tasks, resulting in stable chip formation and prolonged edge integrity. For operations that require consistent results on hard materials, this insert offers a reliable, productivity-oriented solution. Contact Metav Werkzeuge today for tailored application advice on Walter Tools CCGW060202TS-2 WBH10C and ensure optimal hard-part performance — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCGW060202TS-2-WBH10C-WALTER ISO designation: CCGW060202TS-2 WBH10C Series: Walter CBN / Hartstoff Grade: WBH10C Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 80° Insert size: 06 Insert thickness: 02 Chipbreaker: type 2 Tolerance class: G Special features Coated CBN cutting material (WBH10C) Suitable for hardened steels (ISO H) Suitable for pre-hardened steel machining Stable chip formation and high wear resistance Designed for productive, wear‑intensive machining FAQ What materials is this insert suitable for? The CCGW060202TS-2 WBH10C insert is designed primarily for hardened steels (ISO H) and is also suitable for pre‑hardened steel applications where CBN performance is required. How does the 7° clearance affect machining? A 7° clearance reduces friction at the flank face, improving chip flow and minimising rubbing; this contributes to the WBH10C grade maintaining edge stability during hard turning and boring. What benefit does the 0.2 mm corner radius provide? The 0.2 mm corner radius balances edge strength with surface finish capability, enabling accurate shoulder cuts and consistent dimensional control in precision hard‑part machining. Is this insert part of a dedicated series for hard materials? Yes, it belongs to the Walter CBN / Hartstoff series, developed for wear‑intensive and high‑hardness machining tasks, offering CBN‑based grades for long tool life. Can the insert be used for both drilling and turning operations? The geometry and chipbreaker design allow the insert to be applied in both drill/reaming indexable contexts and turning where the rhombic shape and CBN grade are advantageous. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are referenced for explanation only and do not imply any affiliation. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
CCGW060202TS-2 WBK20 Wendeplatten - Walter Tools
Take advantage of the CBN grade WBK20, the precise 7° clearance and the 0.2 mm corner radius to achieve stable cutting in hardened and highly abrasive components; order the insert via Metav Werkzeuge or consult the technical team for application matching. CCGW060202TS-2 WBK20 – CBN indexable insert for drilling and turning (Walter Tools) The CCGW060202TS-2 WBK20 is a CBN indexable insert designed for hard, high‑wear turning and drilling tasks, offering a rhombic 80° geometry for robust cutting and improved edge stability. CBN grade WBK20 for hard materials Rhombic 80° shape for stable cutting 7° clearance angle for sharp shear 0.2 mm corner radius for fine finishes Consistent performance on hardened and abrasive workpieces The CBN cutting material of the WBK20 grade is engineered for hardened steels and similarly abrasive substrates; this results in high wear resistance and consistent tool life under conditions that rapidly blunt conventional carbide. Because CBN maintains edge stability at elevated temperatures and in high contact stresses, the insert delivers predictable performance when machining quenched or case‑hardened components. Practical benefits include fewer tool changes and more uniform component quality in series production. Geometry that ensures predictable surface quality and tool behaviour The combination of a Rhombus 80° form with a 7° relief angle and a 0.2 mm corner radius balances edge strength with surface finish capability. The rhombic footprint supports axial and radial cutting forces, while the modest corner radius reduces vibration and helps achieve a finer surface without sacrificing edge stability. In practice, this geometry supports controlled chip formation and repeatable dimensional results when used with the correct holders and setup. Design elements that support productivity and process reliability Built for industrial use, the insert’s specification—small size designation and chip‑control feature 2—enables integration into compact toolholders and reduces cycle time through efficient swarf evacuation. The WBK20 grade’s resistance to abrasive wear means less frequent indexing and lower downtime, directly contributing to higher overall productivity. Tolerance class G ensures consistent fit and interchangeability in standard tool systems, supporting predictable tool management in production environments. Guidance for selection and safe application Selection should be guided by the actual workpiece properties: while WBK20 is optimised for hardened and highly abrasive tasks, compatibility with specific cast or superalloy grades depends on the detailed product matrix. For best results, match cutting data and holder geometry to the workpiece hardness and the machining operation. Technical documentation and machining recommendations from the manufacturer help to translate insert properties into cutting parameters that protect edge life and ensure component integrity. Discuss application-specific selection of Walter Tools CBN inserts with Metav Werkzeuge to ensure the ideal match for production requirements and to enhance machining productivity. Technical Data Article number: CCGW060202TS-2-WBK20-WALTER ISO designation: CCGW060202TS-2 WBK20 Series: Walter Schneidstoffsorte - Serie offen Grade: WBK20 Facts Relief angle: 7° Corner radius: 0.2 mm Insert shape: Rhombus 80° Insert size: 06 Insert thickness: 02 Chipbreaker type: 2 Tolerance class: G Special features Coating/material: Katalogabhängig Tool type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Application note: CBN grade for hard, abrasive tasks; check product matrix FAQ What materials is this insert best suited for? The WBK20 CBN grade is optimised for hardened steels and other highly abrasive materials; suitability for specific cast irons or superalloys should be verified with the product matrix for the CCGW060202TS-2 WBK20 insert. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius on the CCGW060202TS-2 WBK20 helps to reduce vibration and to produce a finer surface finish while maintaining sufficient edge strength for hard‑material turning. Can the insert be used for both drilling and turning operations? The designation indicates suitability for combined drilling/boring and turning tool systems when mounted in compatible holders; the CCGW060202TS-2 WBK20 can be applied in both modes provided the tool geometry and cutting data match the operation. What are the main advantages of a CBN grade like WBK20? CBN grades such as WBK20 provide exceptional wear resistance and thermal stability, which extends service life and maintains dimensional consistency when machining high‑hardness components with the Walter Tools insert. How should the right grade be chosen for a specific job? Choice of grade depends on workpiece hardness, abrasiveness and the required surface quality; consult Walter Tools’ technical guidance and the insert’s product matrix to align the CCGW060202TS-2 WBK20 with the intended application. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and registered trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
CCGW060204EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Benefit from the combination of CBN-grade WBS10, a Rhombic 80° geometry and a 0.4 mm corner radius for controlled cutting in hardened and highly abrasive materials; order the CCGW060204EM-2 WBS10 directly via Metav Werkzeuge or consult the specialists for application-specific advice. CCGW060204EM-2 WBS10 indexable insert — CBN grade, Rhombic 80° by Walter Tools The CCGW060204EM-2 WBS10 is a rhombic 80° indexable insert in a CBN grade, engineered for demanding turning and boring operations on hardened and wear‑resistant workpieces. CBN-grade WBS10 for hard materials Rhombic 80° geometry for versatile cutting 0.4 mm corner radius for stable edge 7° relief angle for reduced cutting forces Consistent performance on hardened and abrasive materials The CBN cutting material WBS10 is formulated for applications where conventional carbides reach their limits. As a CBN-grade insert, it provides superior wear resistance and consistent edge life when machining hardened steels and similarly abrasive alloys. This performance reduces unexpected tool changes and supports stable cycle times. The description of the grade recommends checking the product matrix for precise workpiece-match details; this helps to plan process parameters and to estimate tool life reliably. Geometry that stabilises the cut and improves productivity The insert’s Rhombic 80° form combined with a 7° relief angle and a 0.4 mm corner radius delivers a balance between cutting robustness and reduced radial forces. The geometry stabilises the cutting edge during interrupted cuts and helps to control chip formation. Where surface finish and dimensional stability are important, the combination of angle and radius reduces vibration and improves repeatability, leading to fewer reworks and higher throughput. Designed for machining and application flexibility As part of the Walter CBN / Hard material series, this insert supports a range of bore‑finishing and external turning tasks on pre‑hardened components and superalloys, subject to process validation. The chipbreaker 2 layout assists chip control under varying depths of cut, while the standardised insert size 06 and thickness 02 allow integration into common toolholders. Selection should follow the specific material and application matrix to ensure optimal cutting data and coolant strategy. Process security, economy and predictable results Using a CBN insert such as this reduces tooling variability in high‑temperature and high‑wear environments. The WBS10 grade is aimed at prolonged cutting performance, which translates into lower frequency of insert changes and more predictable production costs. The tolerance class G and catalogue‑dependent material specifications ensure compatibility with industrial toolholder systems, helping to maintain process security and consistent part quality across batches. For application support or to discuss insertion strategy with Metav Werkzeuge, contact our specialists via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will advise on integration into existing turning or boring setups. Technical Data Article number: CCGW060204EM-2-WBS10-WALTER Article designation: CCGW060204EM-2 WBS10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter CBN / Hard material Grade: WBS10 Facts Relief angle: 7° Corner radius: 0.4 mm Insert shape: Rhombus 80° Insert size: 06 Thickness: 02 Chipbreaker: 2 Tolerance class: G Special features CBN cutting material Designed for hard and highly abrasive workpieces Suitable for turning and boring applications (subject to matrix) Catalogue-dependent material specifications Execution: W FAQ What materials is this insert intended for? The CBN WBS10 grade is intended for hardened steels and similarly abrasive materials; suitability should be checked against the product matrix for the specific workpiece. Can the insert be used for both turning and boring operations? Yes, the rhombic 80° shape and chipbreaker design make the insert suitable for external turning and bore finishing when the correct toolholder is used. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius improves edge stability and contributes to consistent surface finish, particularly in interrupted cuts and when machining harder materials. Is cooling recommended with CBN inserts like WBS10? Cooling strategies depend on the workpiece and operation; consult the Walter CBN series recommendations and process matrix to determine optimal coolant use. What tolerance and size standards does the insert follow? This insert is supplied in tolerance class G with standardised 06 size and 02 thickness for integration with common toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CCGW060204FS-1 WDN10 W - Wendeplatten - Walter Tools
Take advantage of the combination of PKD wear resistance, precise rhombic 80° geometry and a compact corner radius to maintain surface quality and extend tool life in demanding non‑ferrous applications — order genuine Walter Tools inserts via Metav Werkzeuge or contact our consultants for application guidance. CCGW060204FS-1 WDN10 – Indexable cutting insert, PKD, Rhombic 80° (boring/turning) — Walter Tools CCGW060204FS-1 WDN10 is a polycrystalline‑diamond indexable insert engineered for precision boring and turning of abrasive, non‑ferrous materials PKD grade WDN10 for high wear resistance Rhombic 80° insert form for precise profiling 7° relief angle for stable cutting geometry 0.4 mm corner radius for fine finish Longer life and consistent performance in abrasive non‑ferrous machining The PKD composition of this grade, WDN10, delivers exceptional wear resistance when machining abrasive non‑ferrous materials such as certain aluminium alloys and other non‑ferrous, particle‑filled workpieces. Polycrystalline diamond is a hard, wear‑resistant material that preserves cutting edges under abrasive conditions; this leads to longer tool life and fewer index changes, which in turn reduces unplanned downtime and contributes directly to higher throughput and lower cost per component. The performance is particularly evident in demanding series production where consistency matters. Geometry tuned for accuracy and surface quality The rhombic 80° form combined with a 0.4 mm corner radius and a 7° relief angle produces a cutting geometry that balances edge strength with fine surface generation. A modest corner radius helps to smooth transitions and reduce edge chipping, while the relief angle maintains the correct rake and clearance to prevent rubbing. The result is improved dimensional repeatability and a superior surface finish with minimal secondary machining, which is advantageous for tight‑tolerance components and finishing passes. Stability, chip control and process efficiency Built to support stable cutting conditions, this insert contributes to predictable machining cycles and consistent tool life. Stable cutting edges and a suitable chipbreaker design reduce vibration and improve productivity, allowing higher feed rates in many applications without sacrificing quality. Walter Tools’ manufacturing standards ensure the insert arrives with consistent geometry and tolerance G, resulting in repeatable performance across tool changes and batch production runs. Practical integration and selection advice As with all specialised grades, suitability depends on the exact workpiece material and machining parameters; consult the product matrix to match WDN10 to specific alloys and abrasives. The insert is supplied in the standard CCGW format and is compatible with common indexable holders for boring and turning operations. For optimum results, verify clamping stability and run‑out, and schedule insert changes based on observed wear rather than fixed intervals to maximise cost efficiency and part quality. For application advice or to secure genuine Walter Tools CCGW060204FS-1 WDN10 inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data SKU: CCGW060204FS-1-WDN10-WALTER Designation: CCGW060204FS-1 WDN10 Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 06 Thickness: 02 Chipbreaker: 1 Tolerance class: G Special features Grade: WDN10 (polykristalliner Diamant / PKD) Series: Walter Schneidstoffsorte - Serie offen Execution: W Material: Katalogabhängig Note: Verify workpiece compatibility in the product matrix FAQ What materials is this PKD grade suited for? This insert is optimised for abrasive, non‑ferrous materials; the WDN10 grade is a PKD type intended primarily for such workpieces and should be matched via the product matrix for best results. How does the 0.4 mm corner radius affect finish and tool life? A 0.4 mm corner radius improves edge stability and produces a finer surface finish while reducing the risk of chipping, thereby extending the effective tool life under abrasive conditions. Can this insert be used for both boring and turning operations? Yes — the CCGW format and rhombic 80° geometry support both precision boring and turning when fitted to the appropriate indexable holder. What does the chipbreaker designation indicate for machining? The chipbreaker configuration (designated as 1) supports controlled chip formation in selected non‑ferrous materials, helping to avoid long, stringy chips and improving process reliability. Is special tooling required for the CCGW060204FS-1 WDN10 insert? Standard toolholders compatible with CCGW inserts are suitable, but ensure correct clamping and minimal run‑out to exploit the PKD grade’s advantages and to maintain consistent cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.
CCGW060204FSL-9 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of PCD durability and precise geometry for consistent, high-speed machining of abrasive non‑ferrous materials; benefit from reliable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. CCGW060204FSL-9 WDN10 — Indexable boring and turning insert with PCD grade, Walter Tools The CCGW060204FSL-9 WDN10 is a precision indexable insert intended for machining abrasive, non‑ferrous materials, delivering long tool life and stable cutting performance in production environments *PKD grade WDN10 for abrasive non‑ferrous materials *Rhombic 80° insert shape for versatile turning *7° clearance with 0.4 mm corner radius *Chipbreaker 9 for controlled chip formation High wear resistance from polycrystalline diamond for efficient production The WDN10 grade is a polycrystalline diamond (PCD) formulation optimised for abrasive, non‑ferrous materials, offering superior tool life and repeatable component surfaces compared with conventional grades. Using a PCD cutting edge reduces flank wear and maintains edge geometry over longer cycles, which supports higher cutting speeds and fewer indexings. This translates directly into measurable gains in productivity and consistent surface finish for series production runs. Material suitability should be verified against the product matrix to ensure optimal results for the intended workpiece material. Geometry designed to improve stability and chip control The insert’s Rhombic 80° shape combined with a 7° clearance and a 0.4 mm corner radius delivers mechanical strength at the cutting edge while permitting favourable approach angles for turning and boring operations. The integrated chipbreaker 9 promotes controlled chip formation, reducing the risk of entangling swarf and improving process reliability. Together these geometry features increase process security by stabilising cutting forces and reducing vibration, which helps to maintain dimensional accuracy over extended cycles. Productivity gains through predictable wear and fewer interruptions Employing a PCD grade insert decreases frequency of tool changes and supports longer uninterrupted machining periods, improving net cutting time and lowering cost per part. The insert’s stability under abrasive conditions allows higher metal‑removal rates where appropriate, without sacrificing repeatability. For workshop planning, this means fewer spindle stoppages and more consistent output from CNC turning and boring centres, especially when machining abrasive non‑ferrous components. Integration and application guidance for reliable implementation The insert’s designation CCGW060204FSL-9 clarifies its geometry and sizing for compatibility with standard toolholders and clamping systems designed for rhombic, negative‑geometry indexable inserts. The PCD grade performs best when coolant strategies and machining parameters are aligned to the workpiece material and machine rigidity. If uncertainty exists about compatibility or cutting parameters, technical consultation is recommended; the product matrix provides guidance on material suitability and limits of application. For application support and to discuss integration of the Walter Tools CCGW060204FSL-9 WDN10 insert into current production, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery assistance Technical data SKU: CCGW060204FSL-9-WDN10-WALTER Article designation: CCGW060204FSL-9 WDN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 06 Thickness code: 02 Chipbreaker: 9 Tolerance class: G Special features Grade: WDN10 (polycrystalline diamond, PCD) Series: Walter Schneidstoffsorte - Serie offen Base designation: CCGW060204FSL-9 ISO designation: CCGW060204FSL-9 WDN10 Execution: W Note: Material suitability — check product matrix FAQ What materials is this insert best suited for? The CCGW060204FSL-9 WDN10 from Walter Tools is intended for abrasive, non‑ferrous materials; suitability for a specific alloy should be checked in the product matrix. How does PCD compare to carbide for non‑ferrous machining? Polycrystalline diamond (PCD) in the WDN10 grade offers markedly higher wear resistance and longer tool life than carbide when machining abrasive, non‑ferrous materials, resulting in fewer tool changes and improved consistency. What does the 0.4 mm corner radius mean for component quality? A 0.4 mm corner radius adds edge strength and helps produce smooth radii on the workpiece, improving surface integrity while balancing cutting forces for stable machining. Is the CCGW060204FSL-9 compatible with standard negative insert holders? Yes; the insert’s Rhombic 80° form and the designation CCGW060204FSL-9 indicate compatibility with standard negative‑geometry turning and boring holders designed for this insert family. How does the chipbreaker 9 affect machining? The chipbreaker 9 promotes controlled chip formation and evacuation, which enhances process security and reduces the likelihood of chip‑related interruptions in continuous production. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; no affiliation between our company and the named brands is implied. The offered article is original, factory‑new goods from the manufacturer, where applicable. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCGW060204FSR-9 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 PKD grade and precise rhombic 80° geometry for long tool life and consistent chip control; order directly via Metav Werkzeuge or consult the team for application-specific guidance. CCGW060204FSR-9 WDN10 turning and boring insert by Walter Tools — PKD grade for abrasive non‑ferrous machining, 7° clearance CCGW060204FSR-9 WDN10 is a rhombic 80° turning and boring insert designed for high‑wear, non‑ferrous and abrasive non‑ferrous materials in precision metalcutting Polykristalliner Diamant (PKD) grade WDN10 Rhombic 80° geometry for flexible tool orientation 7° clearance angle for reduced rubbing and heat 0.4 mm corner radius for edge strength and finish Durable PKD for abrasive non‑ferrous workpieces The insert uses a polycrystalline diamond (PKD) grade, WDN10, which delivers exceptional wear resistance when machining abrasive non‑ferrous alloys and other non‑ferrous materials containing hard inclusions. As a result, downtime for insert changes is reduced and batch consistency improves. The high hardness of PKD supports longer tool life and stable edge geometry, so components retain their dimensional accuracy over longer runs. The material suitability should be checked against the product matrix to ensure optimal cutting parameters for specific alloys. Geometry designed to improve process reliability and surface quality The combination of rhombic 80° plate form, a 7° clearance angle and a corner radius of 0.4 mm gives a balance of accessibility, edge strength and surface finish. The rhombic shape increases flexibility for turning and boring operations in confined setups, while the moderate radius supports a robust cutting edge for interrupted cuts. The integrated chipbreaker 9 promotes controlled chip formation, lowering the risk of built‑up edge and aiding swarf evacuation—this contributes directly to repeatable surface quality and reduces secondary finishing. Operational advantages and application guidance for production use With a series designation of Walter Schneidstoffsorte - Serie offen, this insert is aimed at applications that demand stable performance and predictable wear behaviour. The coded plate size and thickness (06 / 02) match common toolholder systems for straightforward integration. Process optimisation—cutting speed, feed and depth—will extend tool life and improve economy; where uncertainty exists, Metav Werkzeuge offers application advice to align machine settings with the PKD grade. The insert supports productivity gains through longer tool life and improved cycle stability, making it suitable for serial production of non‑ferrous components where abrasive wear limits conventional carbide life. For high‑wear non‑ferrous machining choose Walter Tools PKD inserts—contact Metav Werkzeuge for tailored process recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CCGW060204FSR-9-WDN10-WALTER Designation: CCGW060204FSR-9 WDN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 (PKD) Execution: W Tolerance class: G Plate form: Rhombus 80° Free angle: 7° Corner radius: 0.4 Chipbreaker: 9 Plate size: 06 Plate thickness: 02 Core specifications Clearance angle: 7° Corner radius: 0.4 mm Chipbreaker designation: 9 Plate size code: 06 Thickness code: 02 Tolerance class: G Special features PKD grade WDN10 for abrasive non‑ferrous materials Suited for aluminium, copper and abrasive non‑ferrous alloys Rhombic 80° geometry for versatile tool orientation Series: Walter Schneidstoffsorte - Serie offen Execution code: W FAQ What materials is this insert intended for? The CCGW060204FSR-9 WDN10 insert uses a PKD grade that is primarily intended for abrasive non‑ferrous materials and other non‑ferrous alloys where high wear resistance is required. How does the geometry influence machining performance? The rhombic 80° form and 7° clearance reduce rubbing and allow flexible approach angles, while the 0.4 mm corner radius improves edge strength and supports consistent surface finish during turning and boring. What role does the chipbreaker 9 play in production? The chipbreaker 9 promotes controlled chip formation and evacuation, which reduces built‑up edge and contributes to stable cutting forces and improved surface quality with the Walter Tools PKD grade. Is material compatibility guaranteed across all non‑ferrous alloys? Material suitability depends on specific alloy composition; the WDN10 grade works well with many abrasive non‑ferrous materials, but the product matrix should be consulted to confirm optimal application and cutting data. Walter Tools: Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CCGW060204TM-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent cutting performance and precise geometry for reliable hard-machining operations. Order inserts or request technical advice directly via Metav Werkzeuge for fast availability and application support. CCGW060204TM-2 WBH10 indexable insert for hard turning (CBN), Walter Tools — 7° clearance, 0.4 mm corner radius CCGW060204TM-2 WBH10 is an indexable insert designed for hard and highly abrasive turning tasks, offering a combination of CBN cutting material and a rhombic 80° shape for stable, repeatable machining of hardened components CBN grade WBH10 for hard machining Rhombic 80° geometry for versatile cutting 7° clearance angle for reduced rubbing 0.4 mm corner radius for defined profiles Reliable hard‑machining performance with CBN technology The CBN cutting material of the insert provides superior wear resistance and thermal stability compared with conventional carbide grades, making it particularly suitable for finishing and profiling of hardened steels. The abrasive-resistant composition maintains the cutting edge under high contact temperatures, which reduces flank wear and extends usable tool life. For shops tackling repeat hard‑turning operations, this results in fewer insert changes and more consistent component tolerances. Stable cutting geometry that supports process reliability The rhombic 80° shape combined with a 7° clearance angle promotes stable chip flow and predictable cutting forces, helping to avoid chatter during finishing passes. The defined 0.4 mm corner radius produces controlled surface contact and a repeatable surface finish, while the geometry supports a range of turning strategies from light finishing to profile turning. This engineered form contributes directly to improved process reliability on hardened components. Designed for hardened material groups and production use Selected for the ISO group H (hardened steels), the insert is tailored to demanding applications where hardness and frictional heat dominate. The grade WBH10 is optimised for such tasks, enabling consistent removal rates and maintaining dimensional stability across batches. For production environments, the combination of CBN and robust geometry supports higher uptime and predictable tool-change intervals, enhancing overall shop productivity. Practical considerations and application guidance When integrating this insert into a machining cell, pairing with rigid toolholders and appropriate cutting parameters is recommended to exploit the CBN advantages fully. Lower cutting depths with controlled feed and stable clamping often yield the best surface integrity and tool life. The insert's design supports finishing operations where surface quality and repeatability are priorities, and it is a pragmatic choice for manufacturers working with quenched or pre‑hardened components. For technical availability and precise application support for Walter Tools inserts such as the CCGW060204TM-2 WBH10, please contact Metav Werkzeuge for expert advice and delivery options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGW060204TM-2-WBH10-WALTER ISO designation: CCGW060204TM-2 WBH10 Series: Walter CBN / Hartstoff Grade: WBH10 Manufacturer: Walter Tools Core data Insert geometry: Rhombic 80° Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Plate thickness: 02 Chipbreaker type: 2 Tolerance class: G Features / Applications CBN cutting material for high wear resistance Suitable for hardened steels (ISO group H) Intended for hard turning and finishing operations Stable cutting edge for repeatable surface quality Designed for production use and abrasive conditions FAQ What materials is this insert suitable for? The CCGW060204TM-2 WBH10 insert is intended primarily for hardened steels (ISO group H) and is optimised for hard‑machining tasks where wear resistance is critical. How does the CBN grade WBH10 benefit machining? The WBH10 CBN grade combines thermal stability and abrasion resistance, resulting in longer edge life and consistent dimensional control during finishing of hardened components. What cutting geometry should be used for best results? Use the rhombic 80° geometry with modest depths of cut and stable clamping; the 7° clearance and 0.4 mm corner radius support smooth chip flow and reliable surface finish. Is this insert suitable for general steel or only hardened parts? While engineered for hardened steels, the insert performs best on high‑hardness components; alternative grades are preferable for standard, non‑hardened steels. Where can technical support and availability be requested? Technical advice and availability for Walter Tools inserts can be obtained via Metav Werkzeuge; contact details are provided in the product information above. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The item offered is an original, factory‑new product of the respective manufacturer.
CCGW060204TM-2 WBH10C WBH10C Wendeplatten - Walter Tools
Take advantage of the combination of a CBN-coated WBH10C grade, a rhombic 80° geometry and a controlled 7° clearance to achieve stable, wear-resistant performance in hard machining. Order the insert directly via Metav Werkzeuge or ask our consultants if additional process data is required. CCGW060204TM-2 WBH10C indexable insert · CBN grade · Rhombic 80° — Walter Tools The CCGW060204TM-2 WBH10C is an indexable turning and boring insert designed for hard machining of hardened steels and high-wear applications. Coated CBN grade WBH10C Suitable for hardened steel machining Rhombic 80° insert geometry 7° clearance for stable cutting High-performance hard-machining capability This insert combines a coated CBN grade with a geometry tailored for challenging finishes on heat-treated components. The WBH10C grade delivers exceptional abrasion resistance, which translates into longer tool life when processing hardened steels. The rhombic 80° geometry provides an effective engagement angle for turning and boring tasks, enabling consistent chip formation and reduced vibration. For production lines where wear and tool changeover time are critical, this cutting tip supports sustained throughput and predictable intervals between regrinds. Consistent process reliability and surface quality Engineered for demanding conditions, the insert’s 7° clearance and controlled corner radius 0.4 mm help maintain a steady cutting edge under high contact pressures. Stable cutting conditions reduce edge chipping and support improved surface finish on hardened parts, which lowers downstream grinding or rework. The design also contributes to repeatable dimensional control, helping to meet tolerances and reduce scrap rates in serial manufacturing. Where predictable performance is essential, this solution emphasises process security and operational continuity. Practical selection and application guidance When choosing holders and parameters, match feed and depth-of-cut to the hardness and geometry of the workpiece; the insert is optimised for hard machining tasks as classified under ISO 513 for hardened steels. The indexable insert performs best with steady clamping and rigid setups to exploit its wear-resistant edge. For users seeking straightforward integration, standard tool holders that accept the CCGW form are compatible; correct mounting and chipbreaker orientation ensure efficient chip removal and reduce thermal load on the cutting edge. If there is any uncertainty whether this insert meets specific requirements, or if further cutting data is needed for particular alloys and hardness levels, Metav Werkzeuge’s technical team is available to advise and provide process recommendations by e‑mail or phone. For process-critical hard-turning tasks, consider the Walter Tools CCGW060204TM-2 WBH10C insert and contact Metav Werkzeuge for tailored cutting data and immediate supply options Technical Data Article number: CCGW060204TM-2-WBH10C-WALTER Designation: CCGW060204TM-2 WBH10C Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter CBN / Hartstoff Grade: WBH10C Tolerance class: G Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Geometry: Rhombus 80° Chipbreaker: 2 Special features Coating / cutting material: Coated CBN Material application: hardened steels (H) Suitable for: hard machining / hardened steel turning Series description: high wear resistance for heat-treated materials Tolerant and stable edge for demanding operations FAQ What materials is this insert designed to machine? The CCGW060204TM-2 WBH10C insert is specified for hardened steels and other hard materials according to ISO 513; the WBH10C CBN grade is selected for high abrasion resistance in such applications. Which machining operations suit this geometry? The rhombic 80° form is suitable for both turning and boring operations where robust edge strength and good access to the cutting zone are required; the design supports stable engagement and consistent chip control. How does the WBH10C grade differ from carbide inserts? WBH10C is a CBN-based grade optimised for abrasion resistance and thermal stability in hard machining; it outperforms standard carbide in longevity and wear control on heat-treated workpieces. Can standard CCGW tool holders be used with this insert? Yes, holders that accept the CCGW insert form will fit the CCGW060204TM-2 format; correct seating and clamping torque are important to maintain the designed cutting geometry and process repeatability. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
CCGW060204TM-2 WBH20 Wendeplatten - Walter Tools
High-performance CBN grade and rhombic geometry ensure consistent results when machining hardened steels; the WBH20 cutting grade offers long edge life and reliable wear resistance, while the insert's 7° clearance and 0.4 mm corner radius support stable hard turning. Order or discuss suitability via Metav Werkzeuge for application-specific advice. CCGW060204TM-2 WBH20 — Turning indexable insert, CBN grade, Rhombus 80° — Walter Tools The CCGW060204TM-2 WBH20 is a CBN indexable insert engineered for hard-part turning and the machining of hardened steels, offering wear-resistant performance in demanding production environments. CBN grade WBH20 for hard materials Rhombus 80° geometry for versatile turning 7° clearance angle for low cutting forces 0.4 mm corner radius for controlled edge strength Consistent wear control for hard machining The use of CBN as the cutting material makes this insert particularly suitable for hardened steels and hard-turning tasks. The WBH20 grade is formulated to resist abrasive wear and preserve edge geometry under high contact temperatures and pressure. In practice, this means fewer insert changes, more predictable tool life and less machine downtime — a direct contribution to improved process efficiency and repeatable component quality. Geometry that improves stability and surface finish A Rhombus 80° form combined with a 7° clearance provides a stable cutting engagement and a favourable approach angle for general turning applications. The 0.4 mm corner radius increases edge strength where interrupted cuts or variable engagement occur, helping to avoid premature chipping. These features together enable more consistent surface finishes and reduce the need for secondary finishing, making the insert an efficient choice for serial production of hardened parts. Practical shop-floor benefits and economic impact Integrating a CBN insert such as this into a hard-machining operation supports higher cutting speeds and sustained performance on abrasive workpiece materials. The result is improved throughput and a better cost per part over time. Alongside the material benefits, the insert's designation and size coding allow straightforward ordering and inventory management, simplifying tool logistics for production planners and buyers alike. Specification guidance and application scope Key identification and sizing are carried in the ISO-style designation and codes, which aid compatibility assessments with toolholders and turning systems. The insert carries the series designation Walter CBN / Hartstoff and the size/thickness coding consistent with industry conventions. Typical application groups include hardened and pre-hardened steels, where the WBH20 grade performs reliably across a range of hardness levels and cutting conditions. Contact Metav Werkzeuge for detailed application support and to confirm the suitability of the Walter Tools CCGW060204TM-2 WBH20 for specific hard-part turning tasks — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: CCGW060204TM-2-WBH20-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGW060204TM-2 WBH20 Walter Tools Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Facts Free angle: 7° Corner radius: 0.4 mm Plate size code: 06 Plate thickness code: 02 Tolerance class: G Special features CBN cutting material, grade WBH20 Rhombus 80° insert shape Chipbreaker type 2 Designation without grade: CCGW060204TM-2 Application: Hard machining / hardened steels FAQ What workpiece materials is this insert intended for? The CCGW060204TM-2 WBH20 is intended primarily for hardened steels and pre-hardened materials, profiting from the wear resistance of the WBH20 CBN grade. Can this insert be used for interrupted cuts? Yes, the 0.4 mm corner radius and robust CBN grade support interrupted cutting; the geometry enhances edge strength and resistance to chipping. How does the Rhombus 80° shape affect turning operations? The Rhombus 80° form offers versatile approach angles for general turning, improving chip flow and aiding stable engagement in a range of turning tasks. What are the key identification codes to quote when ordering? Quote the ISO designation CCGW060204TM-2 WBH20 and the SKU CCGW060204TM-2-WBH20-WALTER to ensure the correct grade and geometry are supplied. Is this insert suitable for high-speed finishing on hardened parts? The CBN composition and the WBH20 formulation are optimised for hard turning; they permit elevated cutting parameters with reliable wear behaviour, supporting efficient finishing under suitable conditions. The Walter AG (marketed as Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are cited for explanation only and do not imply any affiliation between our company and the brands mentioned. The offered item is an original, factory-new product from the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
CCGW060204TM-2 WBH20C Wendeplatten - Walter Tools
Take advantage of the combination of CBN-grade wear resistance, a 7° relief angle and a 0.4 mm corner radius to secure stable edge life and consistent surface finish in hard-turning operations; order the insert through Metav Werkzeuge or consult their specialists for cutting data and availability. CCGW060204TM-2 WBH20C rhombic 80° indexable insert for hard turning by Walter Tools The CCGW060204TM-2 WBH20C is a rhombic 80° indexable turning and boring insert optimised for heavy-duty finishing and semi-finishing of hardened steels in industrial metalcutting. CBN grade for high wear resistance 7° relief angle for stable cutting Rhombic 80° shape for versatile turning 0.4 mm corner radius for consistent finish Maximise process stability with a CBN cutting grade The core advantage of the insert is the CBN cutting grade WBH20C, designed for the elevated demands of hardened steels. This grade provides significant wear resistance under high contact stresses, which translates directly into longer tool life and fewer interruptions for tool change. For production environments where cycle time and repeatability matter, the combination of a wear-resistant grade and a defined geometry reduces variability in component tolerances and contributes to predictable machine utilisation. Technical users benefit from fewer reworks and a more stable machining window. Geometry that improves surface quality and tool life The rhombic 80° form together with a 0.4 mm corner radius and a 7° relief angle delivers a controlled cutting edge that balances strength and surface integrity. The moderate corner radius helps absorb cutting loads while producing a consistent profile on turned components, lowering the risk of microcracking on hardened surfaces. The specified chipbreaker 2 supports effective chip control in interrupted and continuous cuts, reducing the chance of edge damage and improving operator safety at the tool–workpiece interface. In practice, this geometry reduces secondary operations by delivering a finished surface directly from the lathe. Application scope and practical guidance for setup The insert is part of the Walter CBN / Hartstoff series and is intended for hard machining tasks, especially the reliable machining of pre‑hardened and hardened steels. Where process reliability is essential, the WBH20C grade offers consistent edge life and repeatable performance; depending on cutting conditions and component material, similar benefits extend to demanding castings or high‑alloy materials. For best results, pair the insert with stable toolholders, use appropriate cutting speeds for CBN tooling, and adopt coolant and feed strategies recommended for hard turning. For bespoke cutting data and trial recommendations, technical consultation ensures the cutting parameters match the actual application. For hard turning challenges select the Walter Tools WBH20C CBN insert and contact Metav Werkzeuge for personalised cutting data and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCGW060204TM-2-WBH20C-WALTER Designation: CCGW060204TM-2 WBH20C Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Grade: WBH20C Shape: Rhombus 80° Relief angle: 7° Corner radius: 0.4 Size: 06 Thickness: 02 Chipbreaker: 2 Tolerance class: G Facts Relief angle: 7° Corner radius: 0.4 Shape: Rhombus 80° Size designation: 06 Thickness designation: 02 Chipbreaker designation: 2 Special features Coating/grade: coated CBN (WBH20C) Series description: Walter CBN / Hartstoff Intended application: hard machining / hardened steels (H) Suitability: pre‑hardened steel application indicated Tolerances: class G Insert form: turning / boring indexable insert FAQ Which materials is this insert intended for? The CCGW060204TM-2 WBH20C insert from Walter Tools is designed primarily for hardened steels (H) and is suitable for pre‑hardened steel machining tasks. What are the main geometry benefits for production? The rhombic 80° shape with a 0.4 mm corner radius and 7° relief angle on the WBH20C insert gives a robust cutting edge and consistent surface finish, reducing rework and increasing process repeatability. How does the CBN grade affect cutting data? The CBN grade WBH20C offers high wear resistance, so cutting speeds and feed strategies differ from carbide tooling; tailored cutting data from Metav Werkzeuge or the tooling supplier is recommended for optimal performance. Can this insert handle interrupted cuts? With a solid geometry and the specified chipbreaker 2, the insert is suitable for many interrupted and continuous turning operations on hardened materials, offering controlled chip formation and safer machining. Is the insert suitable for finishing and semi‑finishing? Yes, the insert’s geometry and WBH20C grade are optimised for finishing and semi‑finishing of hardened components, providing good surface integrity and extended edge life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CCGW060204TM-2 WBH30 Wendeplatten - Walter Tools
Take advantage of the combination of CBN performance, a stable cutting geometry and proven suitability for hardened steels to secure consistent hard-machining results; order via Metav Werkzeuge or request application advice from our consultants. CCGW060204TM-2 WBH30 – Rhombic 80° CBN turning/boring insert for hard turning by Walter Tools The CCGW060204TM-2 WBH30 is a rhombic 80° CBN indexable insert designed for demanding hard-turning applications and the machining of hardened steels. CBN grade WBH30 for hard turning Rhombic 80° geometry, 0.4 mm corner radius 7° clearance angle for stable cutting Suitable for hardened steels and pre-hardened parts Increased process stability for hard machining The CCGW060204TM-2 WBH30 insert combines the CBN cutting material with a geometry optimised for stability, delivering a stable cutting edge and reduced flank wear during high-stress operations. This results in fewer interruptions, longer index life and more predictable tool-change intervals, which in turn supports a more efficient production rhythm. The rhombic 80° form contributes to secure seating in standard holders while the chipbreaker 2 geometry helps control chip flow under heavy cutting loads. For operations where repeatability and minimal rework are critical, the combination of grade and geometry increases overall process security. Consistent surface quality and dimensional control A precise 0.4 mm corner radius together with the 7° clearance creates a consistent contact zone that reduces vibration and prevents premature edge chipping. This leads to improved surface finish and tighter dimensional tolerance over extended runs. The insert’s design supports finishing passes as well as roughing steps in a hard-turning sequence, reducing the need for separate tools. When machining hardened steels, the predictable edge behaviour of this insert helps maintain part quality across batches, making it suitable for components that require repeatable geometric and surface specifications. Long tool life in abrasive and hard materials The WBH30 grade is a CBN-based solution engineered for wear resistance in high-hardness environments. Its composition and microstructure are selected to withstand elevated temperatures and abrasive contact typical of hardened and pre-hardened steels, delivering high wear resistance and reliable performance. By using a CBN grade tailored to hard machining, the insert reduces the frequency of tool changes and contributes to lower overall machining costs per component, particularly in production scenarios with substantial volumes or tight cycle time requirements. Practical benefits for workshop integration The insert’s standard form and size ensure compatibility with a wide range of indexable tool holders, supporting straightforward tool management and inventory control. Markings such as the rhombic rhombic 80° geometry and the tolerance class G help with quick identification and placement in automated tool changers or manual setups. Operators benefit from the predictable cutting characteristics when setting up turning cycles for hard materials, and production planners benefit from the increased uptime and fewer emergency replacements. For those seeking to standardise hard-turning tooling across machines, this insert offers a robust and application-focused option. For reliable hard-turning performance with Walter Tools’ WBH30 grade, contact Metav Werkzeuge to discuss application suitability and to arrange sample testing or expert advice Technical Data Article number: CCGW060204TM-2-WBH30-WALTER Designation: CCGW060204TM-2 WBH30 Series: Walter CBN / Hartstoff Grade: WBH30 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Rhombus 80° Insert size: 06 Plate thickness: 02 Chipbreaker: 2 Tolerance class: G Special features CBN cutting material for hard machining Optimised for hardened steels (H) Suitable for pre-hardened steel applications Designed for hard turning and abrasive conditions Stable chip control with chipbreaker 2 FAQ What materials is this insert intended for? The CCGW060204TM-2 WBH30 is intended primarily for hardened steels and pre-hardened applications; the WBH30 CBN grade is optimised for hard and abrasive workpieces. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius provides a balance between strength and surface finish, reducing the risk of edge breakage while enabling acceptable finishes in hard-turning operations with the Walter Tools insert. Can this insert be used for finishing passes? Yes, the combination of the CBN grade and the rhombic geometry supports finishing operations on hardened components while maintaining dimensional stability and surface quality. What does tolerance class G mean for this insert? The tolerance class G indicates the manufacturing precision of the insert, ensuring consistent seating and repeatable positioning in compatible tool holders during index changes. Is the insert compatible with standard holders for rhombic 80° inserts? The insert’s rhombic 80° form and common size coding (06) make it compatible with standard holders designed for this geometry; check holder specifications for thickness and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer Walter Tools.
CCGW060204TS-2 WBK20 Wendeplatten - Walter Tools
The combination of a CBN cutting grade, precise rhombic geometry and a defined 0.4 mm corner radius ensures consistent performance in hardened turning and drilling operations; order application‑matched inserts or consult Metav Werkzeuge for matrix advice. CCGW060204TS-2 WBK20 — Indexable CBN Insert for Turning and Boring by Walter Tools (Rhombic 80°, 7° clearance) A CCGW060204TS-2 WBK20 indexable turning/boring insert designed for high‑wear applications, offering CBN cutting grade and a rhombic 80° shape for robust engagement in hardened materials CBN grade for hardened materials Rhombic 80° insert geometry 7° clearance angle for secure cutting 0.4 mm corner radius for repeatability High‑wear resistance for hardened machining with measurable benefits The CBN cutting grade WBK20 provides superior wear resistance for applications that involve hardened steels and other highly abrasive materials. The CBN substrate is engineered to maintain a stable cutting edge under thermal and mechanical stress, which translates into longer tool life and fewer insert changes during uninterrupted production runs. For process planners, this means improved machine uptime and reduced fixture interventions. The grade is especially relevant where conventional carbide grades reach their wear limits; suitability for specific materials such as certain cast irons or superalloys should be verified against the manufacturer’s product matrix. Geometry and edge definition that promote surface quality and repeatability The Rhombic 80° shape combined with a 7° clearance angle and a 0.4 mm corner radius delivers a balance between accessibility in internal boring and a controlled cutting edge for external turning. The geometry ensures stable chip flow and repeatable engagement, which helps achieve consistent surface finishes and tight tolerances across batches. The insert’s two‑chipbreaker set‑up supports predictable chip formation in interrupted and continuous cuts. For production engineers, the result is a reliable insert that supports process standardisation and reduces scrap rates. Process security and integration into shopfloor workflows Designed for indexable tool systems, this insert integrates into established toolholders and clamping systems used in turning and boring centres. The CCGW060204TS‑2 WBK20 is offered in a catalogue‑dependent substrate and is supplied to match the Walter Tools series specification; final selection should consider machine rigidity, feed strategy and workpiece hardness. Where high surface integrity and repeatable dimensional results are required, the insert’s CBN composition and geometric parameters provide tangible process security. For unfamiliar materials or borderline applications, consultation with technical sales or the product matrix is recommended before series introduction. Contact Metav Werkzeuge for application‑specific selection of the Walter Tools CCGW060204TS-2 WBK20 inserts and request the product matrix or machining recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCGW060204TS-2-WBK20-WALTER ISO designation: CCGW060204TS-2 WBK20 Manufacturer: Walter Tools Facts Grade: WBK20 (CBN) Geometry: Rhombic 80° Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Chipbreaker count: 2 Execution: W Tolerance class: G Special features Series: Walter Schneidstoffsorte - Serie offen Material availability: Katalogabhängig Intended for high‑wear, hardened material machining Check product matrix for material suitability Indexable turning / boring application FAQ What materials is this insert intended for? The WBK20 grade is a CBN‑based solution intended primarily for hardened steels and other high‑wear workpieces; the CCGW060204TS‑2 WBK20 insert may also be suitable for specific cast irons or superalloys depending on the selected matrix. Can this insert be used for internal boring and external turning? Yes, the rhombic 80° geometry offers good accessibility for internal operations while maintaining stable engagement for external turning, making the insert versatile within turning and boring tool systems. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius supports improved edge strength and repeatable cutting forces, which commonly leads to better surface finish and dimensional stability in serial production. Is coolant recommended when using this CBN grade? Coolant strategy depends on the workpiece and machine configuration; CBN grades often perform well with controlled coolant or minimal quantity lubrication to manage temperatures and chip evacuation—refer to machining guidelines for the CCGW060204TS‑2 WBK20 for specifics. Are these original factory‑new Walter Tools inserts? Yes. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered article is an original, factory‑new product from the manufacturer Walter Tools. Marked brand names remain the property of their respective owners Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com