DNMG110408-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and repeatable geometry for efficient cast-iron turning; request a specification or a consultation from Metav Werkzeuge to ensure optimal integration in production. DNMG110408-MK5 WKK20S turning insert – for cast iron, Tiger·tec Silver DNMG110408-MK5 WKK20S is a negative-geometry turning insert optimised for cast-iron machining, offering a coated-carbide grade designed for stable wear and consistent performance Tiger·tec Silver coating for high wear resistance Optimised MK5 chipformer for reliable chip control Rhombic 55° shape with 0.8 mm nose radius Suited for cast iron machining (ISO K) Longer tool life through coating and grade selection The combination of the Tiger·tec Silver series and the WKK20S grade yields a cutting edge tailored to the abrasive nature of cast-iron workpieces. As a coated carbide insert, it balances toughness and hardness to resist abrasive wear typical of grey and nodular cast irons, while the grade’s designation signals a universal yet resilient performance. The built-in chipformer MK5 supports predictable chip breaking and evacuation, which reduces downtime caused by imprecise chip flow and protects both the toolholder and the workpiece. The negative free angle (0°) is suitable for robust turning operations where stability under intermittent cuts and interrupted cuts is a requirement. Geometry that improves surface quality and repeatability The rhombic 55° insert form and 0.8 mm nose radius provide a dependable compromise between strength and finishing capability: a rounded cutting edge gives improved edge stability, while the 55° approach angle helps to control cutting forces in turning applications. The insert’s tolerance class M and standardised plate dimensions ensure quick, repeatable seatings in toolholders, simplifying tool-change procedures and maintaining consistent workpiece dimensions across batches. The DNMG110408-MK5 format and plate thickness deliver the mechanical support necessary for medium- to heavy-duty turning, reducing vibrational influences on surface finish. Productivity and process security in series production Designed for workshop and production environments, the insert supports continuous operation through a combination of wear-resistant coating, standardised geometry and a reliable chip control concept. The Walter Tools solution lowers the frequency of unplanned tool changes and contributes to higher first-pass yields by offering predictable tool life and performance in cast-iron machining. Integrating these inserts into existing turning cycles can raise throughput and reduce scrap, while the grade’s universality simplifies inventory: one coated-carbide designation covers a wide range of cast-iron alloys and typical shop conditions. Request a tailored recommendation or a technical datasheet from Metav Werkzeuge for the DNMG110408-MK5 WKK20S turning insert; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application-specific advice Technical data SKU: DNMG110408-MK5-WKK20S-WALTER ISO designation: DNMG110408-MK5 WKK20S Designation (without grade): DNMG110408-MK5 Manufacturer: Walter Tools Facts Geometry: Rhombic 55° Nose radius: 0.8 mm Plate size: 11 Plate thickness: 04 Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S Material: Coated carbide Chipformer: MK5 Application: Cast iron (ISO group K) Suitable for abrasive cast-iron machining FAQ What materials is this insert intended for? The DNMG110408-MK5 WKK20S turning insert is specified for cast-iron machining (ISO group K) and is formulated to manage the abrasive and brittle chip behaviour typical of those materials. How does the Tiger·tec Silver series affect tool life? Tiger·tec Silver coating on the WKK20S grade improves wear resistance and edge protection, extending cutting life under typical cast-iron cutting conditions and contributing to more predictable productivity. What role does the MK5 chipformer play? The MK5 chipformer is engineered to break and evacuate chips reliably in turning operations, reducing the risk of chip entanglement and protecting both the toolholder and the workpiece during continuous production runs. Is the insert suitable for heavy interrupted cuts? The negative free-angle geometry (0°) combined with the DNMG format and the 0.8 mm nose radius provides enhanced edge support and stability, making this insert appropriate for more demanding cuts and intermittent engagement scenarios. How does the rhombic 55° shape influence cutting forces? A 55° approach angle moderates radial and axial force components, improving control over cutting forces and helping to achieve consistent dimensional accuracy and surface quality in serial turning operations. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are referenced for explanation only; there is no affiliation between our company and the named brands. The described article is original, brand-new material from the manufacturer. The Walter brand is named solely for product identification and explanatory purposes.
DNMG110408-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP20G grade for reliable stainless‑steel turning; the optimised MM5 chipbreaker and rhombic geometry deliver consistent chip control and surface quality. Order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110408-MM5 WMP20G indexable turning insert — Tiger‑tec Gold, for stainless‑steel machining | Walter Tools The DNMG110408-MM5 WMP20G is a robust indexable turning insert designed for medium to heavy machining of stainless steel, combining a coated carbide grade with a dedicated chipbreaker for stable performance. Tiger‑tec Gold coated grade WMP20G Optimised MM5 chipbreaker for stable chips Rhombic 55° geometry for versatile turning 0.8 mm corner radius, 0° negative rake Reliable performance for stainless‑steel turning The Tiger‑tec Gold WMP20G grade is tailored for the specific demands of stainless steel: high toughness, a tendency to build up on the cutting edge and elevated thermal loads. The coated carbide composition provides a stable cutting edge under such conditions, reducing the risk of built‑up edge and enabling longer intervals between index changes. Choosing a coated grade designed for this material group improves process stability and helps maintain consistent component tolerances in serial production. Predictable chip control and surface finish The MM5 chipbreaker is optimised to produce short, controllable chips when machining ductile, work‑hardening grades. In combination with the rhombic 55° shape and a 0.8 mm corner radius, the geometry balances edge strength with the ability to achieve a good surface finish. The 0° (negative) rake increases the robustness of the cutting edge, making the insert suitable for interrupted cuts and harder stainless grades while supporting reliable chip evacuation and reduced rework. Efficient integration and repeatable tool life As an indexable insert with a standard ISO designation, this component is straightforward to seat in common toolholders and insert pockets, allowing fast changeovers and predictable set‑up times. The coated grade and geometry aim to deliver repeatable cutting performance and extended edge life, which contributes to higher overall productivity and reduced tooling costs per part. For production environments seeking consistent throughput, the insert supports stable process windows and fewer unscheduled interventions. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and application guidance; our consultants provide technical assistance and material‑specific cutting data. Technical Data Article number: DNMG110408-MM5-WMP20G-WALTER Product type: Indexable turning insert Grade / sort: WMP20G Series: Tiger‑tec Gold Facts Size designation: 11 Thickness designation: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Special features Insert shape: Rhombic 55° Chipbreaker: MM5 Material group suitability: M (stainless steel) Base material: Coated cemented carbide Standard designation: DNMG110408-MM5 WMP20G Manufacturer: Walter Tools FAQ Which materials is this insert intended for? The DNMG110408-MM5 WMP20G is formulated for stainless steel machining (ISO group M) and performs best under moderate to robust cutting conditions. What benefit does the MM5 chipbreaker provide? The MM5 chipbreaker promotes short, controllable chips and stabilises chip formation when machining ductile stainless‑steel grades, supporting consistent surface quality. How does the 0° negative rake affect cutting? A 0° (negative) rake increases edge strength and resistance to chipping, which is beneficial for interrupted cuts and tougher stainless‑steel alloys when using this turning insert. Can this insert be used in standard toolholders? Yes — the insert follows ISO indexable insert conventions and fits compatible DNMG toolholders, enabling quick replacement and consistent positioning. What does the Tiger‑tec Gold series contribute? The Tiger‑tec Gold coating enhances wear resistance and thermal stability of the cutting edge, extending useful edge life during stainless‑steel turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original factory‑new product of Walter Tools.
DNMG110408-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WMP20S grade and a rhombic 55° geometry for reliable machining of stainless steel; the result is consistent component quality and reduced tool change frequency. For procurement or detailed process advice, order directly via Metav Werkzeuge or consult the Metav team. DNMG110408-MM5 WMP20S indexable turning insert — Walter Tools, Tiger·tec Silver, for stainless steel DNMG110408-MM5 WMP20S is an indexable turning insert designed for medium to robust machining of stainless steel, offering process-stable cutting under challenging conditions Tiger·tec Silver coating for edge stability WMP20S grade for stainless steel applications Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robust cutting edge Reliable cutting performance through modern coating technology The Tiger·tec Silver coating combined with the WMP20S grade provides enhanced wear resistance and reduced friction at the cutting edge, which translates into longer tool life and fewer interruptions in the machining cycle. This technological pairing supports stable chip formation when working with stainless steel, a material group known for its tendency to work-harden and generate heat. For production planners, this means improved process reliability and predictable component quality under medium to demanding conditions. Geometry and edge definition that support consistent surface finish The rhombic 55° shape and the 0.8 mm corner radius create a balance between accessibility and edge robustness. The 0° negative rake increases edge strength for interrupted cuts and tougher turning operations, while the chipbreaker MM5 helps control chip flow during machining. These geometric choices reduce the risk of build-up at the edge and help maintain a consistent surface finish, especially important when producing parts that require tight visual or dimensional tolerances. Application-focused design for stainless steel machining This insert is specifically suited to stainless steel applications and is optimised for the thermal and mechanical challenges that these alloys present. The cutting grade is engineered to support secure chip control and a stable cutting edge in stainless steels, minimising the tendency for built-up edge and enabling repeatable results. For operators seeking predictability when machining stainless steel, this insert offers an efficient compromise between cutting performance and tool durability. Practical compatibility and economical use in indexable tool systems As an indexable insert in the DNMG family, the component integrates with standard holders and established turning systems; this reduces shopfloor complexity and allows straightforward stocking strategies. The combined effect of coating, grade and geometry can lower total machining cost by extending cutting intervals and reducing unplanned tool changes. For production managers, this yields measurable productivity gains and easier process planning without the need to revise existing clamping or holder inventories. Contact Metav Werkzeuge for tailored process advice and to source Walter Tools DNMG110408-MM5 WMP20S indexable inserts for stainless steel machining Technical data Article number: DNMG110408-MM5-WMP20S-WALTER Name: DNMG110408-MM5 WMP20S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Plate size: 11 Thickness: 04 Free angle: 0° (negative) Chipbreaker: MM5 Geometry: Rhombic 55° Grade: WMP20S Series: Tiger·tec Silver Tolerance class: M Special features Coated cemented carbide grade (Tiger·tec Silver) Application: stainless steel (stainless steels) Suitable for medium to robust machining conditions Designed for stable chip formation and reliable edge life FAQ What materials is this insert suitable for? The insert is specified for stainless steel and is engineered to manage the work-hardening and heat characteristics typical of stainless steels; the WMP20S grade supports secure chip formation in these materials. Which geometry and edge preparation does the insert offer? This DNMG insert features a rhombic 55° profile, 0.8 mm corner radius and a 0° negative rake, combining accessibility with a robust cutting edge for demanding turning operations. Does the insert have a coating, and what benefit does it bring? Yes — the Tiger·tec Silver technology provides enhanced wear resistance and lower friction, which helps extend tool life and stabilise the cutting process when machining stainless steel. What chip control can be expected? The MM5 chipbreaker is designed for controlled chip formation under medium to robust cutting conditions, improving swarf evacuation and reducing the risk of built-up edge. Is this insert compatible with standard DNMG toolholders? The component follows the DNMG family specifications and fits conventional DNMG toolholders, enabling straightforward integration into existing indexable turning systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools and other brand names are mentioned for explanation and identification only; no relationship between our company and the trademark owners is implied. The offered item is an original, factory-new product of the manufacturer.
DNMG110408-MM5 WMP30G WMP30G Wendeplatten - Walter Tools
This DNMG110408-MM5 WMP30G insert pairs Tiger·tec Gold coating with a robust MM5 chipbreaker to deliver consistent chip control and extended edge life when machining stainless steel; order directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG110408-MM5 WMP30G — Indexable turning insert (WMP30G) by Walter Tools, Tiger·tec Gold, for stainless steel DNMG110408-MM5 WMP30G is an indexable turning insert engineered for secure chip formation and stable cutting when machining stainless steel under medium to robust conditions Tiger·tec Gold-coated grade WMP30G MM5 chipbreaker for controlled chips Rhombus 55° geometry for flexible turning 0.8 mm corner radius for longer edge life Boosted process reliability with Tiger·tec Gold The Tiger·tec Gold coating combined with the Walter WMP30G grade is designed to reduce friction and improve wear resistance when cutting stainless steel, a material group prone to built-up edge and thermal loads. The coated carbide substrate supports a stable cutting edge, which reduces the frequency of tool changes and helps maintain consistent cycle times. By choosing a combination of coating and substrate optimised for the M group, shops gain measurable improvements in tool life and reproducible part quality, especially in repeated production runs where process stability is decisive. Stable chip control and surface results Equipped with the MM5 chipbreaker and a 0° negative rake, this insert controls chip formation reliably even in tougher cuts, minimising entanglement and improving swarf evacuation. The 0.8 mm corner radius balances edge strength with the ability to achieve good surface finish, reducing microchatter and promoting even wear distribution across the insert corner. These attributes translate into fewer interruptions for edge dressing or insert changes, supporting uninterrupted production and predictable surface quality on end components made from stainless steel. Flexible geometry for efficient stock removal The Rhombus 55° insert shape and the designation DNMG110408-MM5 provide a versatile solution for a wide range of turning operations, from face turning to light profiling. The insert’s geometry offers multiple cutting edges per index, increasing economy per part and simplifying inventory management. With clearly defined tolerance class M and a standard thickness code 04, integration into existing toolholders and tool systems is straightforward, enabling quick replacement and minimised setup time while maintaining consistent cutting performance. For reliable machining with Walter Tools' Tiger·tec Gold inserts and expert application advice, contact Metav Werkzeuge—info@metav-werkzeuge.com or +49 2822 7131930—for supply and technical consultation. Technical data Article number / SKU: DNMG110408-MM5-WMP30G-WALTER Label: Drehwendeschneidplatte DNMG110408-MM5 WMP30G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert ISO designation: DNMG110408-MM5 WMP30G Facts Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 11 mm Thickness code: 04 Geometry: Rhombus 55° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WMP30G Chipbreaker: MM5 Material group suitability: stainless steel (M) Execution: G FAQ What materials is this insert best suited for? This Walter Tools DNMG110408-MM5 WMP30G insert is optimised for stainless steel (ISO group M), offering secure chip formation under medium to robust cutting conditions. How does the MM5 chipbreaker benefit production? The MM5 chipbreaker on the DNMG110408-MM5 WMP30G promotes controlled chip breaking and evacuation, which reduces the risk of swarf entanglement and supports continuous machining. Can the insert handle interrupted cuts? Yes, the combination of WMP30G grade and a 0.8 mm corner radius provides a robust cutting edge suitable for variable conditions, including occasional interrupted cuts. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original factory-new item of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG110408-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM10S grade for reliable machining of stainless steel and heat‑resistant superalloys, while the Rhombic 55° geometry and 0° negative relief deliver secure cutting performance; order the DNMG110408‑MM5 WSM10S directly via Metav Werkzeuge or request tailored advice from our consultants. DNMG110408‑MM5 WSM10S indexable turning insert — Tiger·tec Silver, 0° negative relief | Walter Tools The DNMG110408‑MM5 WSM10S is an indexable turning insert engineered for demanding applications, providing robust edge stability for machining stainless steel and heat‑resistant superalloys in industrial production environments. Tiger·tec Silver coated grade WSM10S Optimised for stainless steel and superalloys Rhombic 55° insert with 0.8 mm corner radius Negative 0° relief for high edge security High process reliability for difficult‑to‑cut materials The combination of the Tiger·tec Silver coating and the WSM10S carbide grade supports stable chip formation and enhanced thermal resistance when machining stainless steel and nickel‑based alloys. The specialised coating reduces adhesion and wear at the cutting edge, which translates into longer intervals between index changes and fewer unscheduled tool interventions. For production planners this means predictable performance and reduced scrap rates, as the insert helps maintain consistent surface finish and dimensional repeatability even under elevated cutting temperatures. Geometry designed to protect the cutting edge and improve reproducibility The Rhombic 55° form with a 0.8 mm corner radius and 0° negative relief creates a geometry that favours a robust cutting edge and controlled chip flow. A negative relief reduces the tendency for breakouts at interrupted cuts and supports stable cutting when feeds vary. The MM5 chipbreaker is optimised for secure chip control across medium to heavy engagement depths, lowering the risk of built‑up edge and improving tool life. In practical terms, these geometry choices make the insert well suited to applications where edge security and repeatable results are essential. Increased productivity through predictable wear behaviour and tool life Designed for series production, this insert offers an economical balance between wear resistance and toughness: the coating and grade support durability while the geometry minimises thermal and mechanical stress on the cutting edge. The result is improved uptime of tool systems and less frequent tool changes, which contributes to more efficient cycle times and lower overall machining costs. The combination of process security and a stable cutting edge supports consistent part quality, making the component a reliable option for workshop fleets and production cells seeking steady throughput under challenging material conditions with the backing of Walter Tools expertise. For personalised selection advice or to discuss supply options for Walter Tools Tiger·tec Silver inserts such as the DNMG110408‑MM5 WSM10S, contact Metav Werkzeuge for technical consultation and order assistance Technical data Article number: DNMG110408-MM5-WSM10S-WALTER Designation: DNMG110408-MM5 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Chipbreaker: MM5 Execution: G Facts Insert size: 11 Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Rhombic 55° Tolerance class: M Special features Coating/technology: Tiger·tec Silver Suitable for: stainless steel (M) and heat‑resistant superalloys (S) Geometry focus: stable edge life and chip control Intended use: turning / indexable insert applications FAQ Is this insert suitable for machining stainless steel? Yes. The DNMG110408‑MM5 WSM10S is specifically designed for stainless steel (ISO group M), offering enhanced chip control and thermal resistance for these materials. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this grade improves wear resistance and reduces adhesion at the cutting edge, which supports longer tool life and more consistent surface quality. How does the Rhombic 55° shape affect machining? The Rhombic 55° form provides a versatile approach angle that balances cutting forces and access, making it suitable for a range of turning operations while helping to maintain edge strength. For which chip types is the MM5 chipbreaker designed? The MM5 chipbreaker is optimised for controlled chip formation in medium to heavy engagement scenarios, assisting process stability and evacuation. Can this insert handle interrupted cuts or varying feeds? Yes. The 0° negative relief and robust corner radius contribute to a secure cutting edge that tolerates interrupted cuts and feed fluctuations with reduced risk of edge failure. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
DNMG110408-MM5 WSM20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, WSM20S grade and precision geometry for stable chip control and consistent performance in rostfreier Stahl turning. Order the DNMG110408-MM5 WSM20S Drehwendeschneidplatte directly via Metav Werkzeuge or ask our consultants if needed. DNMG110408-MM5 WSM20S – Drehwendeschneidplatte, Tiger·tec Silver, 0° (negative) (Walter Tools) A DNMG110408-MM5 WSM20S indexable turning insert designed for reliable machining of rostfreier Stahl and heat‑resistant superalloys in demanding turning applications Tiger·tec Silver coating for high wear resistance Stable edge geometry with 0.8 mm corner radius MM5 chipbreaker for controlled chip formation Rhombus 55° form for universal turning applications Higher process stability for demanding materials The combination of Tiger·tec Silver coating and the WSM20S substrate provides a marked improvement in cutting performance when machining difficult materials. The innovative coating enhances wear resistance and thermal stability, which supports a constant cutting edge life and reduces tooling change frequency. For rostfreier Stahl and alloys where heat and adhesion challenge productivity, this insert maintains a stable cutting edge and helps avoid built‑up edge, delivering predictable machining cycles and fewer interruptions in production. Geometry that improves surface quality and tool life The rhombic 55° plate shape and 0.8 mm corner radius are optimised to balance strength and finish. The geometry yields improved tool engagement angles and distributes cutting forces across the insert, resulting in better surface integrity and lower vibration. The MM5 chipbreaker is engineered for controlled chip formation, which reduces the risk of chip entanglement and supports continuous machining with consistent part quality. These characteristics translate directly into reduced rework and increased process reliability. Designed for rostfreier Stahl and high‑temperature alloys This grade is specifically intended for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S) where material toughness and poor thermal conductivity demand a robust solution. The 0° (negative) rake increases edge strength and supports higher feed rates under interrupted cuts, while the coated carbide substrate resists thermal degradation. As a result, the insert offers practical performance advantages in applications where both edge stability and temperature resistance are essential. Practical handling and production benefits The insert’s standardised DNMG format enables straightforward integration into common holders and tool systems, simplifying inventory and set‑up. The precise tolerance class and consistent manufacturing ensure repeatable results across batches, allowing planners to rely on reproducible tool life data for process costing and cycle optimisation. The overall effect is a more efficient machining process with improved uptime and trustworthy component quality. Consult Metav Werkzeuge for Walter Tools Tiger·tec Silver inserts to specify the right geometry and grade for rostfreier Stahl turning, or request application support at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: DNMG110408-MM5-WSM20S-WALTER Designation: DNMG110408-MM5 SKU: DNMG110408-MM5-WSM20S-WALTER Manufacturer: Walter Tools Facts Size: 11 mm Thickness: 4 mm Corner radius: 0.8 mm Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM20S Chipbreaker: MM5 Plate form: Rhombic 55° Execution: G Material suitability: rostfreier Stahl; high‑temperature superalloys / Titanium (S / M) FAQ What materials is this insert suitable for? The DNMG110408-MM5 WSM20S insert is suitable for rostfreier Stahl (ISO group M) and heat‑resistant superalloys and Titanium (ISO group S), offering improved chip control and edge stability. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on this Walter Tools insert increases wear resistance and thermal stability, which helps extend tool life and maintain consistent cutting performance in demanding turning operations. What cutting geometry features support surface finish? The rhombic 55° form combined with a 0.8 mm corner radius and the MM5 chipbreaker supports stable cutting engagement and controlled chip formation, improving surface quality and reducing the need for rework. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG110408-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Combine high process security, the Tiger‑tec Silver coating and a robust 0.8 mm corner radius for reliable chip control and consistent edge life — order directly via Metav Werkzeuge or consult the team for application-specific recommendations. DNMG110408‑MM5 WSM30S — Turning indexable insert, Rhombic 55° (0.8 r), Walter Tools The DNMG110408‑MM5 WSM30S is a negative‑relief, 55° rhombic turning insert optimised for machining stainless steel and heat‑resistant superalloys in demanding turning operations Tiger‑tec Silver coated grade WSM30S Optimised for stainless steel and superalloys Rhombic 55° geometry for flexible cutting 0.8 mm corner radius, negative 0° relief Greater cutting reliability in difficult alloys The combination of the WSM30S grade and the Tiger‑tec Silver coating is designed to improve thermal resistance and support stable chip formation when machining challenging materials such as stainless steel and nickel‑based alloys. The advanced coating reduces built‑up edge and improves wear resistance, which translates into longer tool life and fewer index changes during production. For operations sensitive to heat and adhesion, this insert provides a predictable cutting behaviour that helps maintain consistent part quality across batches. Geometry that balances versatility and surface finish The rhombic 55° geometry with a 0.8 mm corner radius and 0° negative relief offers a balanced compromise between strength and accessibility for a wide range of turning tasks. The MM5 chipbreaker promotes controlled chip formation in sticky or work‑hardening materials, aiding swarf evacuation and reducing secondary cutting. This geometry supports both semi‑finishing and finishing passes where a reliable edge and repeatable dimensional results are required, while the insert form permits multiple indexing positions for economical use. Process security and practical application guidance Designed for industrial turning processes, the insert supports secure machining of heat‑sensitive alloys where stable edges and clear chips are essential. The tolerance class M ensures consistent geometry from edge to edge, enabling reproducible results in serial production. For best results, pair the insert with a rigid toolholder and a stable clamping setup; adjusting feed and cutting speed to the workpiece and machine conditions will optimise life and surface quality. If cutting data or toolholder recommendations are needed, technical consultation is available to align tool selection with the specific application. Contact Metav Werkzeuge for personalised cutting data and order details for Walter Tools Tiger‑tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DNMG110408‑MM5‑WSM30S‑WALTER Designation: DNMG110408‑MM5 Full designation: DNMG110408‑MM5 WSM30S Series: Tiger‑tec Silver Grade: WSM30S Manufacturer: Walter Tools Numeric specifications Plate size: 11 Corner radius: 0.8 mm Plate thickness: 04 Relief angle: 0° (negative) Tolerance class: M Materials & special features Coating: Tiger‑tec Silver Chipbreaker: MM5 Plate form: Rhombus 55° Execution: G Applicable material groups: S / M (superalloys, stainless steel) FAQ Which materials is this insert suitable for? The WSM30S grade and Tiger‑tec Silver coating make the insert suitable for machining stainless steel and heat‑resistant superalloys; the specification lists applicability to material groups S and M. What does the 55° rhombic geometry mean for applications? A 55° rhombic insert provides flexibility for general turning and profiling operations; the shape and 0.8 mm corner radius offer a balance between cutting strength and the ability to reach tighter radii. How does the MM5 chipbreaker affect performance? The MM5 chipbreaker supports reliable chip control and promotes stable cutting in sticky or work‑hardening materials, improving swarf evacuation and contributing to consistent surface quality. Is the insert suitable for finishing passes? Yes, the negative relief combined with the defined corner radius and tolerance class M supports semi‑finishing and finishing where dimensional repeatability and surface integrity are required. Manufacturer/Responsible: Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and product designations are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
DNMG110408-MP3 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of robust wear resistance, predictable chip control and broad suitability for steel turning to increase process reliability and part quality; order DNMG110408-MP3 WPP05G inserts directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110408-MP3 WPP05G – Indexable turning insert for steel, Tiger·tec Gold (Walter Tools) The DNMG110408-MP3 WPP05G is an indexable turning insert in rhombus 55° form, designed for reliable steel machining with Tiger·tec Gold coating and an MP3 chipbreaker. Tiger·tec Gold coating for long tool life MP3 chipbreaker for stable chip control Rhombus 55° geometry with 0.8 mm corner radius Negative 0° rake for high cutting-edge strength High-performance turning tailored to steel The insert is made from coated carbide in the WPP05G grade and benefits from the Tiger·tec Gold technology for substantially improved wear resistance. This combination provides a consistent cutting edge under the thermal loads typical when machining steel, resulting in longer indexing intervals and fewer tool changes. The MP3 chipbreaker is developed to promote orderly chip formation in a wide range of cutting conditions, which reduces the risk of chip entanglement and supports safer, higher‑output turning processes. The rhombus 55° shape with a 0.8 mm corner radius ensures a good compromise between edge strength and surface finish, making the insert suited to many general turning tasks where process stability and repeatability are essential. Productivity and predictable tool life for production environments With tolerance class M and a negative 0° relief angle, this insert prioritises edge robustness and repeatable seating in the pocket, which benefits batch production where consistency matters. The coated grade addresses a broad class of steels, from tougher to more abrasive variants, helping to reduce scrap rates and downtime. Predictable flank and crater wear behaviour mean machining cycles can be planned more accurately, improving overall equipment effectiveness. The geometry and coating together deliver higher material removal rates with controlled wear development, supporting measurable gains in throughput and cost efficiency in mixed-production shops. Practical application and integration into existing tooling systems The designation DNMG110408-MP3 indicates compatibility with standard DNMG toolholders and easy mechanical indexing when a reliable cutting edge is required. The insert thickness and form factor allow insertion into commonly used turning tool systems without special adapters, keeping setup times and inventory complexity low. The MP3 chip control concept simplifies dry or wet turning strategies by promoting short, manageable chips, while the robust negative rake helps when encountering interrupted cuts or heavy cross‑feed operations. For best results, select cutting data that reflect the steel grade and machining type; for specific recommendations Metav Werkzeuge can provide tailored guidance. Contact Metav Werkzeuge for tailored tooling recommendations and to source DNMG110408-MP3 WPP05G inserts by Walter Tools directly from stock. Technical data Article number: DNMG110408-MP3-WPP05G-WALTER SKU: DNMG110408-MP3-WPP05G-WALTER Product type: Indexable turning insert Core technical data Insert designation: DNMG110408-MP3 WPP05G Grade/series: WPP05G / Tiger·tec Gold Inscribed circle: 11 mm Corner radius: 0.8 mm Thickness: 04 Relief angle: 0° (negative) Designs / Special features Chipbreaker: MP3 Geometry: Rhombus 55° Tolerance class: M Material application: P (steel) Execution: G FAQ What materials is this insert suitable for? The DNMG110408-MP3 WPP05G insert is designed primarily for machining steel (material group P) and performs across a range of steel types due to its WPP05G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WPP05G grade increases wear resistance and cutting-edge stability, which leads to longer tool life and more consistent turning results with the DNMG110408-MP3 insert. What is the benefit of the MP3 chipbreaker? The MP3 chipbreaker promotes controlled chip formation in steel machining, helping to avoid long, tangled chips and improving process safety and surface quality when using this Walter Tools insert. Why choose a negative 0° relief angle? A negative 0° relief angle gives higher cutting-edge strength and better resistance to mechanical shock, making the insert suitable for robust turning tasks and interrupted cuts with the DNMG110408-MP3 WPP05G. Can this insert be used in standard DNMG toolholders? Yes, the DNMG110408-MP3 form is compatible with standard DNMG toolholders; correct seating and clamping according to the holder manufacturer’s guidance ensures repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global family of precision tooling brands. Protected brand names and trademarks are the property of their respective owners and are used here for identification and explanation only. There is no affiliation between Metav Werkzeuge and the manufacturers mentioned. The offered item is an original, factory-new product of the stated manufacturer.
DNMG110408-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of a robust negative‑rake geometry, the Tiger‑tec Gold coating and the MP3 chipbreaker delivers consistent edge life and controlled chip formation for steel turning; benefit from predictable performance and reduced rework. Order original Walter Tools inserts via Metav Werkzeuge or consult the technical team for application advice. DNMG110408‑MP3 WPP10G indexable turning insert, Tiger‑tec Gold (for steel) — Walter Tools DNMG110408‑MP3 WPP10G is a rhombic 55° indexable turning insert designed for stable steel machining with a coated carbide grade and MP3 chip control DNMG110408‑MP3 WPP10G insert by Walter Tools Tiger‑tec Gold coating for consistent edge life MP3 chipbreaker for controlled chip formation Rhombic 55° form with 0.8 mm corner radius Reliable performance for steel turning The WPP10G grade from the Tiger‑tec Gold family is a coated carbide formulation developed specifically for the thermal and chip‑formation conditions encountered when machining steel (ISO group P). The coating provides a balanced combination of wear resistance and toughness, which translates into longer edge life and fewer unexpected tool changes. For production environments that prioritise throughput and repeatability, this insert ensures more consistent cycle times and reduced scrap. Predictable chip control and process stability Equipped with the MP3 chipbreaker and a 0° negative rake, this insert promotes reliable chip control and a robust cutting edge. The MP3 geometry guides chips into short, manageable forms, lowering the risk of entanglement and improving surface finish. The negative relief geometry increases cutting edge strength under interrupted cuts and heavy radial engagement, supporting stable machining in demanding turning operations. Geometry designed for versatile set‑ups The rhombic 55° profile combined with a 0.8 mm corner radius and size 11 offers a versatile compromise between strength and profile detail. The thickness code 04 and the DNMG‑style body make the insert suitable for standard DNMG toolholders used in conventional and CNC lathes, facilitating quick integration into existing tool assemblies. These geometric choices reduce the need for frequent tool swaps while maintaining access to various radii and turning strategies. Application benefits and practical considerations This insert is optimised for unalloyed and alloyed steel grades, supporting a broad range of cutting conditions from finishing to medium‑roughing. The coated carbide grade aims to reduce flank and crater wear, providing consistent dimensional results over extended runs. Application advice and recommended cutting parameters are available from Metav Werkzeuge to match the insert to specific workpiece alloys and machine dynamics; such support helps to achieve the intended balance between productivity and surface quality. Contact Metav Werkzeuge for stock availability and application recommendations on Walter Tools Tiger‑tec Gold inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DNMG110408‑MP3‑WPP10G‑WALTER Article: Indexable turning insert DNMG110408‑MP3 WPP10G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: MP3 Form: Rhombic 55° Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Insert size: 11 Thickness code: 04 Tolerance class: M Special features Coated carbide grade (WPP10G) Optimised for steel (ISO group P) Robust negative‑rake geometry for interrupted cuts Suitable for standard DNMG toolholders Stable chip control via MP3 breaker FAQ What materials is this insert intended for? The DNMG110408‑MP3 WPP10G insert is designed primarily for steel (ISO group P), covering unalloyed and alloyed steels with a focus on stable chip formation and wear resistance. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on this Walter Tools insert produces short, controllable chips, enhancing process stability and improving surface finish during turning operations. Is the negative‑rake geometry suitable for interrupted cuts? Yes, the 0° negative relief provides increased edge strength, making the insert well suited to interrupted cuts and applications with higher radial engagement. Does this insert fit standard DNMG toolholders? The insert follows the DNMG designation and is compatible with the corresponding standard DNMG toolholders typically used in conventional and CNC turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification purposes only and do not imply any affiliation between Metav Werkzeuge and the listed manufacturers.
DNMG110408-MP3 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise chip control and robust cutting stability for more productive steel turning operations; order the insert through Metav Werkzeuge or contact our consultants for application advice. DNMG110408-MP3 WPP20G turning insert by Walter Tools — Tiger‑tec Gold, MP3 chipbreaker, 0° negative rake DNMG110408-MP3 WPP20G is a rhombic 55° turning insert optimised for steel machining, offering consistent cutting performance and reliable chip formation in medium to demanding turning tasks. Tiger‑tec Gold coating for enhanced wear resistance Rhombic 55° geometry for versatile turning MP3 chipbreaker for controlled chip formation 0° negative rake for robust cutting stability Greater production consistency through optimised coating and grade The combination of the Tiger‑tec Gold series and the WPP20G grade provides a predictable tool life and high process reliability when machining steels (ISO P). The coated carbide composition balances wear resistance and toughness, which reduces unplanned tool changes and supports longer uninterrupted runs. This results in measurable efficiency gains on serial production components and contributes to a steadier surface finish over the life of the insert. By selecting a grade designed for the thermal and chip-formation behaviour of steel, shops can expect improved productivity without compromising edge life. Precise chip management and stable cutting characteristics The integrated MP3 chipbreaker controls chip flow and breaks long swarf into manageable fragments, lowering the risk of workpiece damage or machine stoppages. Coupled with the Rhombus 55° geometry and a corner radius of 0.8 mm, the insert delivers a balance between strength and form accuracy; the geometry enables both versatile approach angles and consistent engagement in varied turning profiles. The 0° negative rake enhances edge robustness during interrupted cuts or heavy feeds, making the system suitable for operations where stability and repeatability are priorities rather than aggressive finish-only cutting. Practical benefits for workshop decision-making and tool selection Specified with tolerance class M, this insert aligns with industrial requirements for interchangeability and predictable seating in toolholders. The design focuses on two practical outcomes: fewer insert changes and simpler process parameters for machinists and process planners. For engineering teams evaluating tooling options, the combination of chip control, grade characteristics and insert geometry simplifies the calculation of cycle times and tooling costs per part. For application-specific questions or recommendations on holder compatibility and cutting data, Metav Werkzeuge provides technical guidance to ensure the insert matches the intended turning strategy. Contact Metav Werkzeuge to discuss application-specific recommendations and to secure Tiger‑tec Gold turning inserts from Walter Tools for reliable steel machining Technical Data Article number: DNMG110408-MP3-WPP20G-WALTER Designation: DNMG110408-MP3 WPP20G Manufacturer: Walter Tools Core data Insert size: 11 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Geometry: Rhombus 55° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP3 Material application: Steel (ISO P) Application focus: universal to wear‑resistant steel machining FAQ What materials is this insert suitable for? The DNMG110408-MP3 WPP20G insert from Walter Tools is specified for steel (ISO P) applications, covering unalloyed and alloyed steels with a range of wear and toughness requirements. How does the Tiger‑tec Gold coating benefit performance? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and heat management, extending cutting edge life and improving process stability during prolonged steel turning operations. What is the effect of the MP3 chipbreaker in practice? The MP3 chipbreaker produces short, controlled chips that are easier to evacuate, reducing the likelihood of entanglement and helping to maintain consistent surface quality and machine uptime. Why choose a 0° negative rake for certain turning tasks? A 0° negative rake provides a more robust cutting edge, preferred for interrupted cuts or heavy feed conditions where edge strength and resistance to chipping are essential. Is this insert suitable for finishing or roughing operations? With its 0.8 mm corner radius and balanced grade properties, the insert is versatile for both medium roughing and semi‑finishing; selection should be based on the desired surface finish and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original new merchandise from the manufacturer. Walter Tools is a brand of Walter Deutschland GmbH and forms part of the wider Sandvik group.
DNMG110408-MP3 WPP30G WPP30G Wendeplatten - Walter Tools
Maximised turning performance through a coated carbide grade and an optimised chipbreaker delivers longer tool life and steadier cycle times; benefit from the Tiger·tec Gold technology and the robust WPP30G grade for steel machining. Order the DNMG110408-MP3 WPP30G directly via Metav Werkzeuge or ask our consultants if needed. DNMG110408-MP3 WPP30G — Turning insert with MP3 chipbreaker, Tiger·tec Gold by Walter Tools DNMG110408-MP3 WPP30G is a rhombic 55° turning insert for steel machining, engineered for stable chip control and consistent edge life in medium to heavy turning operations. Tiger·tec Gold coating for long life MP3 chipbreaker for controlled chips Rhombus 55° geometry for versatile turning 0.8 mm corner radius for a robust cutting edge Stable production through advanced coating and grade The combination of Tiger·tec Gold technology and the WPP30G grade provides a balanced wear resistance and toughness tailored to steel machining. Coated carbide reduces flank and crater wear, which translates into longer tool life and fewer tool changes in serial production. The described grade is optimised for the thermal and mechanical conditions that occur when machining steels (ISO group P), so process windows can be widened without sacrificing surface quality. For procurement and planning, this means fewer interruptions and a steadier production flow. Precise chip control for safer, more efficient turning The MP3 chipbreaker is designed to produce short, manageable chips during turning, improving both surface finish and operator safety. Combined with the rhombic 55° geometry and a 0° negative rake, the insert maintains a stable cutting edge under varying depths of cut. The 0.8 mm corner radius adds edge strength, reducing the risk of chipping when entering tougher sections or interrupted cuts. For workshop managers, the direct benefit is predictable cutting behaviour and reduced scrap rates, especially in mixed-batch environments. Practical integration and inventory efficiency The insert’s standard geometry and designation simplify toolholder selection and stock management. The DNMG form fits common turning toolholders, allowing rapid replacement and minimising downtime. With tolerance class M and the proven Walter Tools manufacturing quality, the component supports repeatable results across shifts. Technical staff will appreciate the clear material assignment — intended primarily for steel — which makes process planning straightforward and reduces the risk of incorrect tool use. Contact Metav Werkzeuge for application advice and availability on the Walter Tools DNMG110408-MP3 WPP30G turning insert with Tiger·tec Gold technology Technical data *Article number: DNMG110408-MP3-WPP30G-WALTER *Designation: DNMG110408-MP3 *ISO designation: DNMG110408-MP3 WPP30G *Series: Tiger-tec Gold *Grade: WPP30G *Manufacturer: Walter Tools Core specifications *Plate size: 11 *Thickness: 04 *Corner radius: 0.8 mm *Plate form: Rhombus 55° *Rake angle: 0° (negative) *Tolerance class: M Materials & features *Chipbreaker: MP3 *Coating / material: Coated carbide, Tiger·tec Gold *Application group: P (steel) *Execution: G *Suitable for: Steel machining FAQ What materials is this insert intended for? The DNMG110408-MP3 WPP30G is designed for the ISO P group — in practice this means steel and a range of unalloyed and alloyed steel grades. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker shapes and breaks chips into short segments, improving chip evacuation and surface quality when using the DNMG110408-MP3 WPP30G in turning operations. Can the insert withstand interrupted cuts? With a 0.8 mm corner radius and the WPP30G grade’s balanced toughness, the insert offers enhanced edge strength for intermittent cuts compared with finer radii. Is the geometry compatible with standard toolholders? The DNMG form is a common industry standard; the DNMG110408-MP3 WPP30G fits widely used turning toolholders that accept rhombic 55° inserts. What process benefits can be expected from Tiger·tec Gold? The Tiger·tec Gold coating improves wear resistance and thermal stability, which typically results in longer tool life and more consistent component tolerances during serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DNMG110408-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating combined with the WPP05G grade and the MP5 chipbreaker for reliable, productive steel turning; order directly via Metav Werkzeuge or ask their consultants for application guidance. DNMG110408-MP5 WPP05G Drehwendeschneidplatte (for Steel) by Walter Tools — Rhombus 55°, 0° negative rake DNMG110408-MP5 WPP05G is a robust indexable turning insert designed for efficient steel machining, offering stable chip formation and extended tool life. Tiger·tec Gold coated carbide grade WPP05G Optimised MP5 chipbreaker for steel turning Rhombus 55° form with 0.8 mm corner radius 0° negative rake for robust cutting performance Consistent performance for demanding steel operations The combination of Tiger·tec Gold coating and the WPP05G grade provides enhanced wear resistance and consistent edge stability during high‑load turning of steels. The coated carbide substrate reduces flank wear and supports repeatable tool life, which directly improves process reliability and reduces unplanned tool changes. This insert is engineered to cope with the thermal and mechanical conditions typical for ISO P group materials, so machining cycles remain stable even under varying cutting parameters. Controlled chip flow and surface quality The MP5 chipbreaker and Rhombus 55° geometry are configured to optimise chip breaking and evacuation when machining steels. The 0.8 mm corner radius helps maintain a strong cutting edge for interrupted cuts while contributing to a good surface finish on turned components. The 0° negative rake increases cutting robustness, making the insert suitable for heavier depths of cut and applications where edge strength is paramount. For workshops seeking consistent component quality, these geometric choices translate into fewer rework cycles and improved first‑pass yield. Productivity and process security in everyday production This indexable insert supports productive material removal with predictable wear behaviour, lowering total machining cost per part in many production scenarios. The grade and chipbreaker are tailored for a wide range of steel types, delivering a balance between toughness and wear resistance that suits both serial turning and batch production. When application parameters require adaptation, Metav Werkzeuge’s consultants can assist with selecting insert variants or cutting data recommendations to match specific machining strategies. For technical clarification or complex applications, further specification and cutting data can be provided. Discuss Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge for tailored application advice and specification support; contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange consultation Technical data Article number: DNMG110408-MP5-WPP05G-WALTER Designation: DNMG110408-MP5 WPP05G Product type: Turning insert (indexable) Series: Tiger·tec Gold Grade: WPP05G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Shape: Rhombus 55° Rake angle: 0° (negative) Insert size: 11 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Substrate: Coated carbide Chipbreaker: MP5 Application: Steel (ISO P) Execution: G Material code: P FAQ What materials is this insert intended for? The DNMG110408-MP5 WPP05G is optimised for machining steels (ISO group P), with the WPP05G grade tailored for typical steel cutting conditions. How does the MP5 chipbreaker improve machining? The MP5 chipbreaker on this insert enhances chip control during turning of steel, promoting stable chip flow and helping to protect the cutting edge for longer tool life. Is the 0° rake suitable for heavy cutting? Yes, the 0° negative rake increases edge robustness, making the insert suitable for heavier depths of cut and more demanding turning operations. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold coating offers improved wear resistance and thermal stability, which supports consistent performance and longer tool life when machining steels with the WPP05G grade. Can Metav Werkzeuge advise on cutting data for this insert? Technical advisory and cutting‑data recommendations are available through Metav Werkzeuge to optimise the DNMG110408-MP5 WPP05G for specific machines and applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG110408-MP5 WPP10G Wendeplatten - Walter Tools
Take advantage of a proven combination of productive coating technology, reliable chip control and a geometry optimised for steel turning to maintain steady production cycles; order directly via Metav Werkzeuge or consult the team for application-specific recommendations. DNMG110408-MP5 WPP10G — Turning insert, Tiger·tec Gold, for steel — Walter Tools The DNMG110408-MP5 WPP10G is a rhombic 55° indexable turning insert designed for machining steel, offering a Tiger·tec Gold coated grade and a low-relief negative rake for stable cutting performance Tiger·tec Gold coating for high productivity WPP10G grade optimised for steel machining Rhombic 55° insert with 0.8 mm corner radius MP5 chipbreaker for reliable chip control Productivity through advanced coating and material design The combination of the Tiger·tec Gold coating and the WPP10G grade provides a high-performance surface treatment that reduces flank and crater wear during long runs. This translates into consistent tool life and fewer indexings per workpiece, which supports shorter cycle times and lower total machining cost. The coated cemented carbide composition is engineered for typical heat and chip behaviour encountered when turning steel, improving resistance to abrasion while preserving edge stability. Geometry that promotes secure cutting and chip control The rhombic 55° form with a 0.8 mm corner radius and the MP5 chipbreaker create a balance between edge strength and manageable chip formation. A negative 0° relief angle (negative rake) enhances edge robustness under interrupted cuts and heavy cross sections, reducing risk of edge chipping. In practice, this geometry supports steady metal removal rates and predictable surface finish, particularly in semi-finishing and general turning operations. Consistent performance for serial production and process security The insert’s tolerance class M and the stability of the WPP10G grade ensure repeatable results across batches, which is especially valuable in series production. The wear characteristics of the grade allow for extended intervals between tool changes and simplify tooling logistics. Combined with the insert form and chipformer, the component is suited to maintain high process reliability while delivering good surface quality on a range of common steels. Practical guidance for application and integration Indexable inserts of this type are best used with appropriately selected toolholders and cutting parameters that account for the positive effect of the coating and the negative rake geometry. Adjustments to feed and speed can exploit the Tiger·tec Gold benefits: higher cutting speeds where thermal stability matters, and moderated feeds to preserve surface integrity when required. If uncertain about the ideal cutting data for a specific steel grade or production setup, technical advice is available by e‑mail or phone: info@metav-werkzeuge.com | +49 2822 7131930 Discuss Walter Tools Tiger·tec Gold turning solutions with Metav Werkzeuge for tailored cutting data and availability — contact Metav Werkzeuge to plan tool integration and procurement Technical Data SKU: DNMG110408-MP5-WPP10G-WALTER Name: DNMG110408-MP5 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Plate size: 11 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: MP5 Plate form: Rhombus 55° Material suitability: Steel (P) Execution: G FAQ What materials is this insert suitable for? The DNMG110408-MP5 WPP10G by Walter Tools is designed for steel machining and aligns with ISO P workpiece groups for unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on this turning insert improves wear resistance and thermal stability, which helps to extend tool life and maintain cutting performance in steel turning. What is the purpose of the MP5 chipbreaker? The MP5 chipbreaker promotes reliable chip formation and evacuation, reducing the likelihood of entanglement and improving process security during medium to heavy cuts. Is the rhombic 55° shape suitable for finishing passes? The rhombic 55° geometry with a 0.8 mm corner radius is suitable for general and semi-finishing applications; surface finish outcomes depend on cutting data and machine dynamics. Can this insert be used for interrupted cuts or heavy cross sections? Yes, the negative 0° relief angle and the robust grade make the insert well suited to interrupted cuts and heavier engagement where edge strength is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, brand‑new product from the manufacturer.
DNMG110408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating for enhanced wear resistance, the MP5 chipbreaker for consistent chip control, and the stable Rhombus 55° geometry to secure reliable turning of steel; order directly via Metav Werkzeuge or consult our specialists for process parameters. DNMG110408-MP5 WPP20G Turning indexable insert — Rhombus 55° for steel | Walter Tools A robust DNMG110408-MP5 WPP20G turning insert engineered for general steel machining, featuring a Tiger·tec Gold coated carbide grade and an MP5 chipbreaker for predictable chip formation. Tiger·tec Gold coated carbide grade WPP20G MP5 chipbreaker for controlled chip formation Rhombic 55° geometry with 0° negative rake 0.8 mm corner radius for reliable edge life Consistent wear resistance for high-volume turning The Tiger·tec Gold coating on this grade WPP20G provides a balance of abrasion resistance and toughness, making the insert particularly suited to the thermal and mechanical loads encountered when machining materials in the ISO P group (steel). As a coated carbide solution, the design reduces flank wear and extends edge life compared with uncoated alternatives, which translates into fewer indexings and a steadier production flow. For manufacturers prioritising uptime and repeatable results, the combination of coating technology and the selected substrate offers measurable gains in process stability. Geometry and chip control that improve surface quality The Rhombus 55° form and 0° negative rake produce a cutting geometry that supports predictable cutting forces and a stable contact area, which aids in achieving consistent surface finishes. The integrated MP5 chipbreaker is optimised for the typical chip forms encountered when turning steel, deliberately shaping chips to prevent entanglement and reduce the risk of tool and workpiece damage. The 0.8 mm corner radius further enhances edge robustness, enabling modest finishing passes without sacrificing tool life. Together, these features help maintain part tolerances and reduce rework. Practical selection and application benefits for machine shops With a tolerance class of M and the execution code G, this insert is compatible with standard DNMG pockets and common toolholder systems used in turning operations. The designation highlights a versatile choice for shops machining unalloyed and alloyed steels under typical conditions. The insert’s MP5 geometry and Tiger·tec Gold grade simplify grade selection across a range of production tasks, lowering the number of tool variants required on the shelf and easing logistics. For process planners, the result is a more economical and predictable tooling mix without compromising performance. Contact Metav Werkzeuge for tailored cutting-data recommendations and immediate availability of the DNMG110408-MP5 WPP20G turning insert from Walter Tools — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DNMG110408-MP5-WPP20G-WALTER Name: DNMG110408-MP5 WPP20G Brand: Walter Tools Product type: Turning indexable insert Series: Tiger·tec Gold Facts Plate form: Rhombus 55° Rake angle: 0° (negative) Corner radius: 0.8 Plate size: 11 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade / sort: WPP20G Chipbreaker: MP5 Material suitability: Steel (ISO P) Execution: G Designation without sort: DNMG110408-MP5 FAQ What materials is this insert suitable for? The DNMG110408-MP5 WPP20G insert from Walter Tools is designed principally for ISO P materials, meaning it is optimised for machining unalloyed and alloyed steel under typical turning conditions. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on the DNMG110408-MP5 WPP20G promotes controlled chip formation when machining steel, reducing chip-related interruptions and helping to maintain consistent surface quality. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade enhances wear resistance and toughness, which helps extend tool life and supports steady performance in production turning operations. Is the insert compatible with standard DNMG toolholders? Yes, the geometry and designation indicate compatibility with standard DNMG 55° rhombic pockets and common turning toolholders designed for indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used solely for identification and explanation. There is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
DNMG110408-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the MP5 chipbreaker and the robust 55° rhombic geometry for reliable steel machining and predictable tool life; order directly via Metav Werkzeuge or request application advice from the sales team. DNMG110408-MP5 WPP30G turning insert – rhombic 55°, 0° negative rake by Walter Tools A DNMG110408-MP5 WPP30G is a rhombic 55° turning insert designed for efficient machining of steel under a wide range of cutting conditions. Tiger·tec Gold coating for extended wear life MP5 chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning 0.8 mm corner radius for strength and surface quality Consistent cutting performance and extended tool life for steel The Tiger·tec Gold coating combined with the WPP30G grade provides a balanced mix of wear resistance and toughness specifically optimised for steel (ISO P). This coated carbide formulation reduces flank and crater wear under elevated temperatures, which translates into longer service intervals and more predictable part quality. The integrated MP5 chipbreaker improves chip control across a range of feeds, helping to avoid built-up edge and ensuring stable machining under interrupted cuts. The 0° negative rake further reinforces the cutting edge against mechanical shock, making the insert well suited to robust turning operations. Geometry engineered for repeatable surface finish and process stability The rhombic 55° shape and 0.8 mm corner radius deliver a practical compromise between edge strength and achievable surface finish. The insert’s geometry supports radial and axial versatility, enabling use in facing, medium turning and light profiling while maintaining dimensional stability. The standard tolerance class M and the insert code indicate consistent manufacturing tolerances for predictable indexing and interchangeability in compatible toolholders. As an indexable solution, the design reduces downtime: multiple cutting edges per insert and quick indexing shorten setup times and improve overall throughput. Practical application advice and productivity gains Designed primarily for steel machining, this insert handles a variety of cutting conditions from general-purpose to more demanding operations where a combination of wear resistance and edge robustness is required. The MP5 chipbreaker is suitable for controlled chip formation, especially in medium-depth cuts, and contributes to operator safety and machine cleanliness. Using this grade and geometry can support higher material removal rates and repeatable part quality, which improves process economics across production batches. For machining strategies, pairing the insert with appropriate speeds, feeds and stable clamping will maximise the advantages offered by the Tiger·tec Gold technology. Contact Metav Werkzeuge for application support, confident availability and ordering of Walter Tools DNMG110408-MP5 WPP30G turning inserts – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: DNMG110408-MP5-WPP30G-WALTER Designation: DNMG110408-MP5 WPP30G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: MP5 Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Insert size: 11 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Suitable for: Steel (ISO P) Geometry: Rhombic 55° Chip control: MP5 Free rake: 0° (negative) FAQ Which materials is this insert suitable for? The DNMG110408-MP5 WPP30G turning insert from Walter Tools is optimised for machining steel (ISO P) and is formulated to handle the typical heat and chip formation behaviour of these materials. What does the WPP30G grade indicate? WPP30G denotes Walter Tools’ Tiger·tec Gold coated carbide grade; it is engineered to balance wear resistance and toughness for reliable performance in steel turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this insert improves chip formation and evacuation, supporting safer, more stable turning operations and consistent surface results under varied cutting conditions. Is the DNMG110408-MP5 suitable for finishing operations? With a 0.8 mm corner radius and rhombic 55° geometry, the insert offers good surface capability for general finishing, although very fine finishing may require smaller radii or dedicated finishing grades. What role does the 0° negative rake play in performance? The 0° negative rake provides a robust cutting edge that resists mechanical shock and contributes to longer edge life in moderate to heavy cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
DNMG110408-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
Reliable, coated carbide grade and an optimised chipbreaker deliver consistent chip control and extended tool life for steel turning; pair this with the robust rhombic geometry for stable, high‑productivity machining. Order or consult Metav Werkzeuge for application support and availability. DNMG110408‑MS3 WPP20G indexable turning insert for Steel (Walter Tools) — Tiger·tec Gold, 0° negative rake The DNMG110408‑MS3 WPP20G is an indexable turning insert designed for steel turning applications, combining the Tiger·tec Gold coated grade with an MS3 chipbreaker in a rhombic 55° form for reliable, productive metal removal. Tiger·tec Gold coated for long life Optimised MS3 chipbreaker for steel Rhombic 55° form with 0.8 mm corner radius Consistent productivity through coated carbide technology The combination of the Tiger·tec Gold coating and the WPP20G grade provides pronounced wear resistance and stable cutting-edge performance during continuous steel machining. This results in longer tool life and fewer insert changes, which helps to reduce setup times and keeps production running smoothly. The coating technology also aids thermal stability under typical steel turning temperatures, so process windows remain predictable and repeatable. Geometry that improves stability and surface quality The rhombic 55° shape with a 0.8 mm corner radius and a 0° negative rake is engineered to increase edge strength and withstand heavier cuts or interrupted machining. The geometry contributes to a controlled load distribution along the cutting edge, delivering a reliable surface finish while maintaining dimensional consistency. The M tolerance class supports interchangeability and repeatable clamping in standard toolholders. Chip control and process reliability for steel applications The MS3 chipbreaker is optimised specifically for steel (P) as defined in ISO 513, producing short, controllable chips that reduce coolant interference and minimise entanglement. Improved chip evacuation helps to protect the workpiece and toolholder, lowers the risk of secondary reworking and supports shorter cycle times. Where consistent chips are required for automated processes, this insert's design aids stable, continuous operation. Practical specification and selection guidance Key dimensional identifiers such as the 11 mm inscribed circle and the thickness code 04 make it straightforward to match the insert to compatible DNMG toolholders. The insert is supplied in execution G and the WPP20G grade targets a balanced mix of wear resistance and toughness for universal steel use. When pairing with tooling, select holders rated for DNMG geometry and consider cutting parameters that leverage the coated grade for optimum performance. Contact Metav Werkzeuge for tailored application advice and to secure the Walter Tools DNMG110408‑MS3 WPP20G Tiger·tec Gold insert for robust steel turning operations Technical Data SKU: DNMG110408‑MS3‑WPP20G‑WALTER Article: Indexable turning insert DNMG110408‑MS3 WPP20G (Walter Tools) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Inscribed circle: 11 mm Corner radius: 0.8 mm Thickness code: 04 Free cutting angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G Chipbreaker: MS3 Form: Rhombic 55° Material application: Steel (P) Execution: G FAQ Which materials is this insert intended to machine? The WPP20G grade is designed for machining steel (P) according to ISO 513; the DNMG110408‑MS3 WPP20G insert targets unalloyed and alloyed steels with a balance of wear resistance and toughness. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade enhances thermal stability and wear resistance, extending insert life and maintaining cutting-edge integrity during steel turning. When is the 0° negative rake geometry recommended? A 0° negative rake is recommended for applications requiring increased edge strength, such as heavier cuts or interrupted turning, where the insert must resist chipping and maintain dimensional stability. How does the MS3 chipbreaker affect machining performance? The MS3 chipbreaker produces short, manageable chips for steel machining, improving chip evacuation, reducing rework risk and supporting higher process reliability in automated or long-run operations. How to ensure compatibility with existing toolholders? Match the DNMG geometry and the 11 mm inscribed circle together with the thickness code 04 to holders specified for DNMG inserts; this ensures correct seating and secure clamping for stable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new article of the manufacturer. Walter Tools is referenced as the product brand.
DNMG110408-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger‑tec Silver coated carbide and the WSM01 grade for stable cutting in demanding materials; the rhombic 55° geometry with an MS3 chipbreaker and a 0° negative rake ensures controlled chips and consistent edge life. Order the DNMG110408-MS3 WSM01 directly via Metav Werkzeuge or consult our advisors for process optimisation. DNMG110408-MS3 WSM01 indexable turning insert — Tiger‑tec Silver for stainless steel & superalloys (Walter Tools) DNMG110408-MS3 WSM01 is an indexable turning insert engineered for secure machining of stainless steel and heat‑resistant superalloys in productive turning operations Tiger‑tec Silver coated grade WSM01 For stainless steel and superalloys Rhombic 55° geometry for versatile turning MS3 chipbreaker for controlled chips Consistent metal removal and process efficiency with a coated carbide grade The coated carbide WSM01 from the Tiger‑tec Silver series is formulated for machining difficult‑to‑cut materials, delivering a balance between thermal resistance and edge stability. As a coated cemented carbide grade, it supports reliable chip formation when turning stainless steel and high‑temperature alloys, reducing unplanned downtime. The combination of coating and substrate promotes longer edge life, which translates into fewer insert changes and steady production throughput for serial or jobbing environments. Geometry and chip control that protect the cutting edge The rhombic 55° shape provides flexibility in approach angles and stable support in toolholders, while the MS3 chipbreaker is tuned for fragmenting chips in tough materials. A 0° negative rake contributes to a robust cutting edge under thermal and mechanical loads; the 0.8 mm corner radius supports strength at the cutting tip and improves wear resistance. These geometric choices reduce the risk of built‑up edge and help maintain consistent surface finish, especially during interrupted cuts and heavy cross‑feeds. Integration into production for reliable, repeatable results Sized as a standard DNMG insert, the component adapts to common turning toolholders and clamping systems, enabling straightforward tool setup and replacement. The grade’s suitability for stainless steel and superalloys supports a wide application window from finishing to medium‑duty roughing, depending on cutting data and tool life targets. In practice, choosing this insert contributes to predictable cycle times, improved first‑pass quality and simplified inventory management through a versatile, high‑performance insert family. For machining stainless steel and superalloys with a focus on process security, contact Metav Werkzeuge for product availability and tailored cutting data—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG110408-MS3-WSM01-WALTER Article designation: DNMG110408-MS3 WSM01 Product type: indexable turning insert Brand: Walter Tools Core specifications Shape: Rhombus 55° Size: 11 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Materials & features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MS3 Applicable material groups: S / M Suitable for: stainless steel FAQ What materials is this insert best suited for? The DNMG110408-MS3 WSM01 insert is designed primarily for stainless steel and for heat‑resistant superalloys (ISO groups M and S), where its Tiger‑tec Silver coating and WSM01 grade improve chip control and edge stability. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker promotes shorter, controllable chips in demanding materials, improving surface finish and reducing the risk of chip entanglement during turning with this insert. Is the 0° negative rake suitable for finishing? The 0° negative rake increases cutting edge robustness; combined with a 0.8 mm corner radius it is most effective for medium‑duty finishing and light roughing where a stable edge and consistent surface quality are required. Can this insert be used with standard DNMG toolholders? Yes, the DNMG form matches common toolholder systems for indexable inserts, allowing straightforward clamping and replacement in established turning setups. What advantage does the Tiger‑tec Silver series provide? The Tiger‑tec Silver series offers a coated carbide formulation that balances thermal resistance and wear protection, contributing to longer tool life and predictable performance in stainless steel and superalloys. Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
DNMG110408-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated grade and the MS3 chipbreaker delivers reliable chip formation and extended tool life for demanding materials; the negative 0° rake and 0.8 mm corner radius support consistent surface quality and process stability. Order the insert directly via Metav Werkzeuge or contact their consultants for application-specific recommendations. DNMG110408-MS3 WSM10S – Indexable turning insert, Tiger·tec Silver, for stainless and heat‑resistant alloys (Walter Tools) The DNMG110408-MS3 WSM10S is an indexable turning insert engineered for tough machining tasks, combining a Tiger·tec Silver coated carbide grade with a dedicated chipbreaker for stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated grade WSM10S Optimised MS3 chipbreaker Negative 0° rake for stable cutting Rhombic 55° geometry with 0.8 mm radius High‑performance grade for difficult‑to‑cut alloys The WSM10S grade, part of the Tiger·tec Silver family, is a coated carbide designed to resist thermal and mechanical wear when machining stainless steels and high‑temperature superalloys. Its coating technology improves heat resistance and reduces flank wear, which translates into longer edge life and fewer insert changes on the production line. For operations where consistent cycle times and predictable tool consumption matter, this insert supports stable cutting behaviour and reliable chip formation, reducing process interruptions and boosting overall productivity. Geometry and chip control that improve surface quality The insert's MS3 chipbreaker is optimised for secure chip control in materials that tend to form long or adhesive chips. Combined with the rhombic 55° shape and a 0.8 mm corner radius, the geometry balances robustness with the ability to produce a consistent finish on the component. The negative 0° rake (negative rake geometry) further strengthens the cutting edge for interrupted cuts and heavy feed conditions, improving edge stability and reducing the risk of built‑up edge on sticky alloys. This means fewer rejects, less rework and a more economical machining process. Practical advantages for workshop integration Dimensional compatibility with standard DNMG toolholders and the well‑known Walter Tools quality make this insert suitable for both single‑piece manufacturing and series production. The design focus on process security and repeatability supports higher spindle utilisation and predictable tool change intervals. For operations aiming to machine stainless steels or heat‑resistant superalloys and titanium, the grade's balanced wear resistance and edge stability help to maintain component tolerances and surface integrity over longer tool lifetimes. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to arrange local stock availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG110408-MS3-WSM10S-WALTER Designation: DNMG110408-MS3 WSM10S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Geometry: Rhombic 55° Rake angle: 0° (negative) Corner radius: 0.8 mm Plate size: 11 Plate thickness code: 04 Special features Grade: WSM10S (coated carbide) Chipbreaker: MS3 Coating technology: Tiger·tec Silver Tolerance class: M Intended materials: stainless steels; heat‑resistant superalloys and titanium FAQ What materials is this insert designed for? The DNMG110408‑MS3 WSM10S is formulated for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering improved heat resistance and chip control for these challenging materials. Which chipforming behaviour can be expected with the MS3 breaker? The MS3 chipbreaker provides controlled, segmented chips in sticky and work‑hardening materials, helping to avoid long, entangling chips and supporting consistent surface quality during turning. Is the insert suitable for interrupted cuts and heavy feeds? Yes; the negative 0° rake and robust rhombic geometry enhance edge strength, making the insert appropriate for interrupted cuts and higher feed rates while maintaining stability. How is the corner radius relevant to surface finish? The 0.8 mm corner radius offers a balance between edge strength and finish capability: it supports good surface integrity while resisting premature chipping under increased load. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
DNMG110408-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger‑tec Gold coating and the WMP20G carbide grade for dependable machining of rostfreier Stahl; the MU5 chipbreaker and rhombic 55° geometry ensure consistent chip control and reliable edge life. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG110408-MU5 WMP20G turning insert for rostfreier Stahl by Walter Tools — Tiger‑tec Gold, MU5 chipbreaker A DNMG110408-MU5 WMP20G indexable turning insert engineered for medium to robust cutting conditions in rostfreier Stahl applications, providing stable cutting edges and repeatable performance Tiger‑tec Gold coating for wear resistance Optimised MU5 chipbreaker for stable chips Rhombic 55° DNMG shape with 0.8 mm radius Negative 0° rake for secure cutting engagement Consistent wear resistance for rostfreier Stahl machining The coated carbide WMP20G grade, part of the Tiger‑tec Gold family, combines a hard, wear‑resistant surface with a substrate designed for toughness. This composition supports secure chip formation when machining rostfreier Stahl, a material group known for toughness and thermal sensitivity. The result is fewer built‑up edges and more predictable tool life, which translates into reduced interruption of production cycles. Explained in practical terms: the coating lowers abrasive wear while the substrate resists edge chipping, so finishing passes remain consistent over longer tool life. Geometry that improves productivity and process stability The DNMG 55° rhombic shape with a 0.8 mm corner radius and the MU5 chipbreaker are tuned to balance cutting strength and chip control. The negative 0° rake angle increases cutting engagement security on interrupted cuts and offers dimensional stability in demanding turning tasks. Together, these features help to reduce vibration and provide smoother chip evacuation, which leads to fewer tool changes and more efficient cycle times. For workshops seeking predictable performance, the geometry supports repeatable results across serial production runs. Simple integration and reliable brand backing Designed as a drop‑in option for standard turning toolholders, the insert’s dimensions and form factor enable fast replacement and straightforward tool management. The coated grade is particularly suited for medium to heavy duty rostfreier Stahl applications, offering machinists a pragmatic balance between edge life and toughness. Backed by Walter Tools engineering, the insert benefits from manufacturer experience in precision tooling and process‑oriented development; this contributes to long‑term consistency and less variability in finishing quality. For applications requiring robust performance in rostfreier Stahl, contact Metav Werkzeuge for tailored advice on tooling combinations and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the DNMG110408-MU5 WMP20G insert and suitable toolholder pairings. Technical Data SKU: DNMG110408-MU5-WMP20G-WALTER Designation: DNMG110408-MU5 WMP20G Type: Drehwendeschneidplatte Series: Tiger‑tec Gold Manufacturer: Walter Tools Core specifications Inscribed circle: 11 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negativ) Corner angle: 55° Tolerance class: M Materials & features Coating / Grade: WMP20G (coated carbide, Tiger‑tec Gold) Chipbreaker: MU5 Material group application: rostfreier Stahl (ISO M) Substrate: M Execution: G FAQ Which materials is this insert suitable for? The DNMG110408-MU5 WMP20G insert from Walter Tools is designed primarily for rostfreier Stahl (ISO group M) and performs well under medium to robust cutting conditions. What is the main benefit of the Tiger‑tec Gold coating? Tiger‑tec Gold on the WMP20G grade provides enhanced wear resistance while maintaining substrate toughness, helping the DNMG110408-MU5 to resist abrasion and edge chipping during rostfreier Stahl turning. How does the MU5 chipbreaker influence machining? The MU5 chipbreaker delivers controlled chip forms for turning operations, improving evacuation and reducing the risk of built‑up edge when the DNMG110408-MU5 insert is used in rostfreier Stahl applications. Can this insert be used in standard toolholders? Yes, the DNMG110408-MU5 follows common DNMG geometry and is compatible with standard turning toolholders designed for 55° rhombic inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG110408-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Combine consistent chip control for stainless steels with a robust coated grade and precise geometry to secure stable turning results; order the DNMG110408-MU5 WMP20S insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. DNMG110408-MU5 WMP20S — Indexable turning insert, Rhombic 55°, for stainless steel, Walter Tools The DNMG110408-MU5 WMP20S is a negative‑rake turning insert optimised for machining stainless steels in medium to robust conditions. Tiger‑tec Silver coating for tough steels Designed for stainless steel (M) Rhombic 55° insert geometry 0° negative rake, 0.8 mm corner radius High-performance turning tailored to stainless steels The combination of the Tiger‑tec Silver coating and the WMP20S grade provides enhanced thermal resistance and improved wear behaviour when machining stainless steel. This coated carbide grade supports controlled chip formation under the higher temperatures and work hardening tendencies typical of these alloys, reducing the risk of built-up edge and unplanned tool changes. The insert’s chipbreaker and substrate design encourage predictable cutting forces, which translates into higher process stability and fewer interruptions in production. Predictable tool life with consistent surface quality The MU5 chipbreaker paired with a 0° negative rake and a 0.8 mm corner radius balances edge strength and surface finish. In practice, this means stable flank wear progression and repeatable optical results on turned components, lowering rework rates. The geometry is especially suited to operations where both robustness and component quality matter, such as medical components or precision assemblies made from corrosion‑resistant alloys. Clear identification of tooling geometry helps maintenance planning and reduces downtime in batch production. Geometry and identification that simplify integration The Rhombic 55° form and the designation DNMG110408-MU5 make this insert straightforward to integrate into established tool holders and tool‑changing routines. The nominal plate size (11) and the thickness code (04) follow common DIN/ISO conventions for easy replacement and inventory control. As a product from Walter Tools, the insert benefits from the manufacturer's focus on precise cutting edges and consistent coating application, supporting reproducible results across shifts and machines. Contact Metav Werkzeuge for application recommendations or to secure supply of the Walter Tools DNMG110408‑MU5 WMP20S insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DNMG110408-MU5-WMP20S-WALTER Designation: DNMG110408-MU5 WMP20S Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Technical specifications Plate size: 11 Plate thickness: 04 Corner radius: 0,8 Free angle: 0° (negative) Special features Coating: Tiger‑tec Silver Grade: WMP20S Chipbreaker: MU5 Plate form: Rhombic 55° Suitable for: stainless steel (M) Series: Tiger‑tec Silver Tolerance class: M Designation: DNMG110408-MU5 FAQ Which materials is this insert intended for? The DNMG110408‑MU5 WMP20S insert is designed primarily for stainless steel machining, indicated by the grade and the ISO material group M. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances heat resistance and wear control, supporting stable cutting when machining corrosion‑resistant alloys with higher thermal load. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker promotes predictable chip formation for reliable evacuation and consistent surface finish on turned parts. What does the 0° negative rake mean for operation? A 0° negative rake increases edge strength and is beneficial for tougher cutting conditions, improving resistance to edge chipping during interrupted cuts. How can the insert be identified for reordering? Use the full designation DNMG110408‑MU5 WMP20S (Walter Tools) and the SKU DNMG110408-MU5-WMP20S-WALTER to ensure correct replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer Walter Tools.
DNMG110408-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP10G grade for reliable, productive machining of Stahl; the robust MU5 chipformer and 0.8 mm corner radius ensure stable cutting and long tool life — order directly via Metav Werkzeuge or contact the consultants for application support. DNMG110408-MU5 WPP10G — Turning insert, Tiger‑tec Gold, Walter Tools A DNMG110408-MU5 WPP10G indexable turning insert engineered for precise external turning of Stahl components in general workshop and production environments Tiger‑tec Gold coating extends insert life For ISO P Stahl machining 0.8 mm corner radius for robust edge Negative rake 0° for stable cutting High productivity and consistent results for Stahl turning The DNMG110408-MU5 WPP10G indexable insert combines a coated carbide substrate with the Tiger‑tec Gold technology to deliver consistently high cutting performance when machining Stahl (ISO P). The MU5 chipformer is designed to produce predictable chip shapes at typical turning feeds, reducing the risk of built-up edge and promoting stable cutting across a range of cutting speeds. By focusing on measurable improvements in tool life and process stability, the insert supports shorter cycle times and fewer tool changes, which directly benefits throughput in serial production. Coating and grade explained to reduce machining risk The WPP10G grade is a coated carbide class developed for general-purpose Stahl applications; the multilayer Tiger‑tec Gold coating improves wear resistance and maintains a sharp cutting edge under heat‑generating conditions typical of turning. A negative rake of 0° provides an extra margin of strength at the cutting edge, making the insert less prone to chipping under interrupted cuts or heavy radial engagement. In practice, these design choices translate to a more predictable tool life and reduced scrap rates when compared with uncoated or inadequately matched grades. Practical setup and benefits in everyday workshop use Installation is straightforward: the rhombic 55° shape and standard DNMG geometry allow compatibility with common toolholders, and the 0.8 mm corner radius gives a robust edge that tolerates slight variances in setup without compromising surface finish. The tolerance class M ensures consistent dimensions for reproducible clamping and repeatable results. For shops aiming to balance economy and performance, this insert offers a reliable combination of wear resistance and edge stability that reduces downtime and supports continuous production schedules. Contact Metav Werkzeuge for application advice and to secure Walter Tools Tiger‑tec Gold inserts for reliable Stahl machining. Technical data Article number: DNMG110408-MU5-WPP10G-WALTER ISO designation: DNMG110408-MU5 WPP10G Manufacturer: Walter Tools Facts Size: 11 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G Chipformer: MU5 Shape: Rhombus 55° Suitable for: Stahl (ISO P) Material: Coated carbide FAQ What workpiece materials is this insert suited for? The DNMG110408-MU5 WPP10G is optimised for Stahl workpieces (ISO P); the WPP10G grade and Tiger‑tec Gold coating are selected for the heat and chip behaviour typical of Stahl turning. How does the MU5 chipformer affect machining? The MU5 chipformer shapes chips predictably at common turning feeds, reducing the chance of snarled chips and improving surface integrity when using the WPP10G grade. Will the rhombic 55° shape fit standard toolholders? Yes, the rhombic 55° DNMG form corresponds to widely used turning toolholders; ensure correct seat and clamp for the DNMG geometry noted on the insert. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance and thermal stability of the coated carbide, supporting longer tool life and consistent cutting performance in Stahl applications. Is the 0.8 mm corner radius suitable for finishing passes? The 0.8 mm radius is robust and offers a compromise between edge strength and surface finish; it is well suited for medium finishing and general purpose turning where durability is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DNMG110408-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide, precise rhombic geometry and reliable chip control for steady productivity in steel turning — order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and availability DNMG110408-MU5 WPP20G — Indexable turning insert, Tiger·tec Gold, for steel (Walter Tools) The DNMG110408-MU5 WPP20G is a rhombic 55° indexable insert engineered for general steel turning; it pairs a Tiger·tec Gold coating with a MU5 chipbreaker to support stable chip formation and consistent tool life Tiger·tec Gold for high wear resistance MU5 chipbreaker for controlled chip formation Rhombic 55° form for versatile turning 0.8 mm corner radius for robust edge strength Greater productivity through advanced coating and grade The Tiger·tec Gold coating in combination with the WPP20G grade delivers a balanced performance profile tailored to steel machining. The coated carbide substrate reduces flank and crater wear under typical steel cutting temperatures, which translates into longer service intervals and fewer insert changes. For workshops seeking measurable throughput gains, this behaviour results in more consistent cycle times and reduced machine downtime. The engineering behind the grade emphasises universality and wear resistance, offering a pragmatic solution for mixed-production environments where steels of varying alloy content are processed. Predictable machining thanks to defined geometry and chip control A rhombic 55° geometry with a 0.8 mm corner radius and the MU5 chipbreaker provides dependable cutting behaviour across medium to general turning operations. The negative 0° rake (negative geometry) increases edge strength and is particularly suited to interrupted cuts or higher radial depths, while the MU5 groove promotes segmented, controllable chips that evacuate reliably from the cutting zone. The result is a stable surface finish and repeatable dimensional outcomes, which supports downstream processes and inspection routines. Practical advantages for tool management and process security The insert’s size designation and standardised DNMG style make it straightforward to integrate into existing toolholders and inventory systems. The coated grade is designed for typical steel applications (ISO group P), offering a balance between wear resistance and toughness that helps avoid premature edge breakdown. This contributes to process security and predictable tool life, reducing the frequency of unexpected tool changes. Clear geometry and a universal grade simplify tool selection, enabling operators and programmers to standardise cutting parameters across batches and thus lower preparation time. Application guidance and recommended use cases Optimised for the turning of steels, the insert performs well in general-purpose machining where a combination of surface quality and tool life is required. Its construction favours operations with moderate to heavy engagement and where chip control is essential for safe, unattended cycles. For best results, pair the insert with compatible holders for DNMG-style geometry and follow manufacturer-recommended feeds and speeds for the specific steel grade being machined. When process conditions are unusual, consult cutting data to adapt speeds and feeds to maintain edge integrity. For application advice, availability and tailored cutting data for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — assistance by phone or e‑mail is available for selecting the optimal insert grade and parameters Technical Data SKU: DNMG110408-MU5-WPP20G-WALTER Designation: DNMG110408-MU5 WPP20G Manufacturer: Walter Tools Facts Corner radius: 0.8 Free rake: 0° (negative) Plate form: Rhombus 55° Plate size designation: 11 Plate thickness code: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MU5 Suitable material group: steel (ISO P) Execution: G Product type: Indexable turning insert (DNMG) FAQ What materials is this insert designed for? The DNMG110408-MU5 WPP20G insert is formulated for machining steels (ISO group P), offering a balance of wear resistance and toughness suited to typical steel turning tasks. How does the MU5 chipbreaker affect performance? The MU5 chipbreaker promotes consistent chip formation and evacuation, improving process stability and reducing the risk of chip-related interruptions when using the DNMG110408-MU5 WPP20G. Is the grade suitable for high-speed turning? The WPP20G grade with Tiger·tec Gold coating provides enhanced wear resistance and can support productive cutting regimes on steel; cutting speeds should be set according to the specific workpiece alloy and machine capability. What benefits does the rhombic 55° form provide? The rhombic 55° geometry offers versatile approach angles for a wide range of turning operations, enabling dependable surface finish and dimensional control with the DNMG-style insert. Where to get cutting data and technical support for this insert? Cutting data and application support for the DNMG110408-MU5 WPP20G can be obtained via Metav Werkzeuge; their consultants can advise on feeds, speeds and holder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Trademarks and brand names are the property of their respective owners and are used here for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DNMG110408-MU5 WSM20S MU5 Wendeplatten - Walter Tools
Take advantage of the high thermal resilience of the Tiger·tec Silver grade together with the MU5 chipbreaker and a compact 0.8 mm corner radius for stable metalcutting of stainless and heat‑resistant alloys; order the item directly via Metav Werkzeuge or contact our consultants for tailored machining advice. DNMG110408-MU5 WSM20S – indexable turning insert, Tiger·tec Silver, Walter Tools The DNMG110408-MU5 WSM20S is a rhombic 55° indexable turning insert engineered for reliable machining of stainless steels and heat‑resistant superalloys in demanding production environments. Tiger·tec Silver coating for high thermal resilience Optimised MU5 chipbreaker for stable chip control Rhombic 55° form with 0.8 mm corner radius Suited for stainless steel and superalloys Consistent performance in hard‑to‑cut materials The combination of the WSM20S grade and the Tiger·tec Silver coating provides a resilient cutting edge for materials that generate heat and work‑hardening. Thanks to a coated carbide substrate, the insert sustains edge stability under thermal stress, reducing the tendency for built‑up edge when turning stainless steels. This translates into fewer interruptions for edge dressing and a smoother process flow, which supports predictable cycle times and improved component quality. Improved chip control and surface quality The integrated MU5 chipbreaker has been optimised for secure chip formation when machining tough alloys. Controlled chip segmentation reduces the risk of entanglement and promotes uninterrupted cutting, which benefits both automatic and manual operations. As a result, finishing passes can achieve better surface integrity, lowering the need for secondary operations and increasing first‑pass yield in series production. Geometry that boosts productivity and tool life The rhombic 55° shape and 0.8 mm corner radius offer a balanced compromise between strength and cutting versatility. The negative 0° rake (negative geometry) enhances edge robustness for medium to heavy cuts, while the compact corner radius supports repeatable dimensional results on turned features. For workshops focused on productivity, this geometry helps maintain stable tool life and consistent component tolerances across batches. For specific machining parameters, grade comparisons or application advice please contact Metav Werkzeuge: email info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge consultants will recommend the optimal cutting data and variants for the intended application Technical Data SKU: DNMG110408-MU5-WSM20S-WALTER Article number: DNMG110408-MU5 Designation: DNMG110408-MU5 WSM20S Series: Tiger·tec Silver Grade/sort: WSM20S Facts Insert form: Rhombic 55° Corner radius: 0.8 mm Thickness: 04 (plate thickness designation) Free rake: 0° (negative) Tolerance class: M Special features Chipbreaker: MU5 Coating/technology: Tiger·tec Silver (coated carbide) Suitability: stainless steel (M), heat‑resistant superalloys/titanium (S) Execution/design: G (as provided) Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The DNMG110408-MU5 WSM20S insert is designed primarily for stainless steel and heat‑resistant superalloys; the WSM20S grade supports secure chip formation and thermal stability on these materials. How does the MU5 chipbreaker improve machining? The MU5 chipbreaker promotes predictable chip segmentation and evacuation, which helps maintain uninterrupted cutting and improves surface finish when using the Walter Tools insert. Is the negative 0° rake suitable for heavy cuts? Yes, the negative 0° geometry increases edge strength and is suitable for medium to heavy cutting conditions, helping to extend edge life in tougher applications. Can this insert deliver good surface quality on finishing passes? With correct cutting data, the combination of the Tiger·tec Silver coating and optimised chip control enables improved surface integrity, reducing the need for secondary finishing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG110408-MW5 WKK10S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKK10S grade for long tool life, combined with the MW5 chipbreaker and rhombic geometry for reliable chip control in cast‑iron turning; order directly via Metav Werkzeuge or request application advice from the Metav team. DNMG110408-MW5 WKK10S — Turning insert (Rhombus 55°, Tiger‑tec Silver) — Walter Tools The DNMG110408-MW5 WKK10S is a rhombic turning insert designed for productive machining of cast iron, combining a Tiger‑tec Silver coated grade with an MW5 chipbreaker for stable cutting conditions Tiger‑tec Silver coating for long tool life WKK10S grade optimised for cast iron Rhombic 55° geometry for versatile turning MW5 chipbreaker for controlled chip formation Durable coating for extended production runs The Tiger‑tec Silver coating, paired with the WKK10S grade, provides enhanced wear resistance under the abrasive conditions typical of cast iron machining. This combination reduces flank and crater wear, extending tool life and decreasing the frequency of index changes. For process planners and production engineers, the result is fewer interruptions and a more predictable machining window, supporting stable cycle times and consistent component quality. Controlled chips and improved surface quality The MW5 chipbreaker is tuned to the brittle chip behaviour of cast‑iron materials, promoting short, easily manageable chips and reliable evacuation. Improved chip control translates into reduced risk of rework, safer handling at the machine and a more consistent surface finish, especially in interrupted cuts. The insert’s controlled cutting action helps to lower the incidence of secondary operations, contributing to overall machining efficiency. Robust geometry for reproducible results The rhombic 55° form with a 0° negative rake and a 0.8 mm corner radius delivers a robust cutting edge suited to demanding turning tasks. The negative rake increases edge strength for interrupted cuts and heavy depths of cut, while the 0.8 mm corner radius balances edge life with a reliable surface profile. Tolerance class M ensures consistent seating and repeatability across toolholders, supporting predictable part tolerances and reduced setup variability. Discuss Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge for tailored recommendations and application support from the Metav team Technical data Article number: DNMG110408-MW5-WKK10S-WALTER Designation: DNMG110408-MW5 Product type: Drehwendeschneidplatte / Turning insert Series: Tiger‑tec Silver Grade: WKK10S Manufacturer: Walter Tools Facts Geometry: Rhombus 55° Rake: 0° (negative) Corner radius: 0.8 mm Size code: 11 Thickness code: 04 Chipbreaker: MW5 Tolerance class: M Special features Coating technology: Tiger‑tec Silver Optimised for: Cast iron (ISO group K) Application focus: Productive, abrasive wear conditions Robust edge for interrupted cuts Designed for controlled chip formation FAQ What materials is this insert suitable for? The DNMG110408-MW5 WKK10S turning insert from Walter Tools is optimised for cast iron applications (ISO group K), offering abrasion‑resistant performance for typical grey and nodular cast irons. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on the DNMG110408-MW5 WKK10S promotes short, controlled chips and consistent evacuation, which improves process security and reduces the need for secondary chip handling. What benefits does the Tiger‑tec Silver coating deliver? The Tiger‑tec Silver coating on the WKK10S grade increases wear resistance and thermal stability, extending edge life in abrasive cast‑iron turning applications and supporting longer uninterrupted production runs. Is this insert suitable for heavy interrupted cuts? Yes. The rhombic 55° geometry with a 0° negative rake and a 0.8 mm corner radius provides a robust cutting edge for interrupted cuts and higher depths of cut using the DNMG110408-MW5 WKK10S insert. Which tolerance and seating accuracy can be expected? The insert is supplied in tolerance class M, ensuring consistent seating in standard toolholders and reproducible positioning for predictable machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com