DNMA150608-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Silver coating, RK5 chip control and robust edge geometry for reliable cast‑iron turning; order the insert directly via Metav Werkzeuge or request application advice from the consultants. DNMA150608-RK5 WKK20S indexable turning insert, Tiger‑tec Silver, for cast iron — Walter Tools The DNMA150608-RK5 WKK20S is an indexable turning insert developed for productive machining of cast iron components, combining a Tiger‑tec Silver coated grade with an RK5 chipbreaker for stable cutting. Tiger‑tec Silver coating for extended tool life RK5 chipbreaker optimised for cast iron machining Rhombus 55° geometry for flexible turning operations 0.8 mm corner radius for consistent edge strength Consistent chip control for abrasive cast‑iron machining The combination of the Tiger‑tec Silver coating and the RK5 chipbreaker delivers dependable chip formation when machining abrasive cast iron. The coated carbide grade WKK20S is tuned to withstand the frequent, short breaking chips typical of grey and nodular cast irons, so cycle times remain stable and manual chip handling is reduced. This technical configuration supports a lower rate of unexpected tool changes and contributes to a more predictable production flow. Stable cutting edge and repeatable part quality The Rhombus 55° geometry together with a 0.8 mm corner radius and a negative rake angle of 0° provides good edge security and repeatable dimensional results. The insert’s tolerance class M ensures consistent fit in standard toolholders, which helps maintain part accuracy across tool indexings. For operations where edge robustness and predictable wear behaviour matter, this geometry and grade combination reduces the risk of edge chipping and supports consistent surface finishes. Economical use in automated and manual turning centres As an indexable insert in the Tiger‑tec Silver family, this item reduces scrap and tooling overheads by offering multiple usable edges and a coating that extends life under demanding conditions. The insert thickness (06) and 15 mm size make it compatible with a wide range of toolholders designed for this DIN/ISO format, enabling simple integration into existing tool inventories. Further technical support and application data are available from Metav Werkzeuge to assist with process optimisation. Material scope and production benefits The cutting grade is explicitly assigned to ISO group K for cast iron, making it suitable for abrasive grey cast iron and applications where short, brittle chips predominate. The combination of coating technology and substrate hardness supports improved wear resistance and a stable cutting edge, which in turn can reduce downtime and improve overall process efficiency. Use of this insert promotes predictable tool performance and contributes to lower cost per component through extended edge life. Contact Metav Werkzeuge for tailored application advice and to order the DNMA150608-RK5 WKK20S indexable turning insert from Walter Tools Technical data SKU: DNMA150608-RK5-WKK20S-WALTER Designation: DNMA150608-RK5 WKK20S Product type: indexable turning insert (turning insert) Brand: Walter Tools Series: Tiger‑tec Silver Core data Size: 15 mm Thickness: 6 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Geometry: Rhombus 55° Tolerance class: M Special features Grade: WKK20S Chipbreaker: RK5 Coating: Tiger‑tec Silver (coated carbide) Material application: cast iron (ISO group K) Execution: A FAQ Is this insert suitable for all types of cast iron? The DNMA150608-RK5 WKK20S is designed for ISO group K and is suitable for many cast iron types, including abrasive grey cast iron and common nodular grades, where the RK5 chipbreaker provides controlled chip formation. What makes the Tiger‑tec Silver grade advantageous for cast‑iron turning? The Tiger‑tec Silver coating on the WKK20S grade improves wear resistance against the abrasive nature of cast iron and supports longer edge life compared with uncoated carbide grades. Can the insert be used in standard toolholders for DNMA formats? Yes, the DNMA150608-RK5 WKK20S conforms to the standard DNMA format and the tolerance class M ensures compatibility with conventional DNMA toolholders. How does the RK5 chipbreaker affect machining stability? The RK5 chipbreaker is optimised for cast iron to produce short, manageable chips and to maintain a stable cutting load, which helps to reduce vibration and improves process predictability when using the DNMA150608-RK5 WKK20S. What benefits does the 0.8 mm corner radius deliver for production parts? A 0.8 mm corner radius enhances edge strength and reduces the risk of chipping, supporting consistent surface quality and dimensional repeatability over several indexings of the insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are used for clarification only. There is no connection between Metav Werkzeuge and the named brands. The offered item is original, brand‑new goods from Walter Tools.
DNMA150608-RK7 WKK10S Wendeplatten - Walter Tools
Take advantage of a high-performance, cast-iron turning solution that combines the Tiger‑tec Silver coating and the WKK10S grade for durable, predictable cutting, plus the RK7 chipbreaker for controlled chip formation and easy chip evacuation; order directly via Metav Werkzeuge or request detailed application advice from our consultants. DNMA150608-RK7 WKK10S — Indexable turning insert for cast iron, Walter Tools A precision indexable turning insert, DNMA150608-RK7 WKK10S, designed for robust machining of cast iron components with a Tiger‑tec Silver coated carbide grade and an RK7 chipbreaker for stable, repeatable performance Tiger‑tec Silver coating technology WKK10S: grade optimised for cast iron RK7 chipbreaker for controlled chips Rhombus 55° geometry for flexible approach High wear resistance for continuous production The combination of the Tiger‑tec Silver coating and the WKK10S carbide grade delivers a marked improvement in resistance to abrasive wear, which is particularly relevant for the frequent, short, brittle chips encountered when machining cast iron. This results in longer edge life and fewer disruptive tool changes, which in turn supports uninterrupted production runs and improved overall economy. The RK7 chipbreaker further stabilises chip form, reducing the risk of built-up edge and helping to maintain consistent surface quality across serial runs. Geometry that stabilises the cut and reduces rework The Rhombus 55° shape and a 0.8 mm corner radius combine to offer a reliable edge strength and good access to a variety of turning profiles. The 0° (negative) clearance angle gives a robust cutting edge for interrupted cuts and heavy engagement, enhancing process stability under demanding conditions. Together these geometric features reduce vibration and edge chipping, which lowers scrap rates and the need for rework — a clear advantage for production environments focused on repeatability and uptime. Practical benefits for cast‑iron applications Designed specifically for group K (cast iron) machining according to ISO guidance, the coated insert minimises the common failure modes encountered with abrasive grey and nodular cast irons. The coating reduces adhesion and heat-related wear, delivering a predictable cutting behaviour and improved surface finish on the workpiece. This makes the insert a suitable choice for workshops and industrial producers manufacturing engine parts, pump housings or other cast‑iron components where process reliability and clean chip control are priorities. Integration, handling and interchangeability The insert’s ISO-style designation and tolerance class M ensure compatibility with standard DNMA toolholders and straightforward replacement in existing tool setups. The RK7 chipbreaker and the coated carbide composition simplify parameter selection for machinists, enabling quick tuning for feed and speed while keeping tool life consistent. For special production requirements, the DNMA150608-RK7 WKK10S can be specified as part of an optimised tooling strategy to increase throughput without compromising component quality. For reliable cast‑iron turning with Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for ordering and tailored application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMA150608-RK7-WKK10S-WALTER Designation: DNMA150608-RK7 WKK10S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Key dimensions Insert shape: Rhombus 55° Corner radius: 0.8 mm Clearance angle: 0° (negative) Size: 15 Thickness: 06 Tolerance class: M Features & applications Grade: WKK10S (coated carbide) Chipbreaker: RK7 Suitable for: Cast iron (K) Coating: Tiger·tec Silver Execution: A FAQ Which materials is this insert intended for? The DNMA150608-RK7 WKK10S insert from Walter Tools is intended primarily for machining cast iron (ISO group K), where its coating and grade provide abrasion resistance and predictable chip behaviour. What advantages does the Tiger‑tec Silver coating offer? Tiger‑tec Silver on the WKK10S grade improves resistance to abrasive wear and reduces built‑up edge, which helps maintain cutting performance and surface finish when turning cast‑iron components with the Walter Tools insert. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker on this Walter Tools indexable insert produces short, controlled chips typical for cast iron, simplifying chip evacuation and enhancing process stability during continuous production. Is the DNMA150608-RK7 suitable for interrupted cuts? Yes, the negative 0° clearance angle and robust geometry of the DNMA150608-RK7 WKK10S make it suitable for interrupted cuts and operations with variable engagement, offering improved edge strength. How does the insert help increase process reliability? The combination of coated carbide grade, RK7 chip control and the Rhombus 55° form ensures consistent cutting behaviour, reduced tool wear and fewer changes, supporting reliable, repeatable machining cycles. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the named brands. The offered article is original, factory‑new goods of Walter Tools.
DNMA150612-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated carbide grade and the RK5 chipbreaker ensures stable chip formation and extended edge life during cast iron turning; the rhombic 55° geometry with a 1.2 mm corner radius adds strength for repeatable finishing. Order this insert via Metav Werkzeuge or consult our specialists for application guidance. DNMA150612-RK5 WKK10S — Indexable turning insert, Rhombic 55°, RK5, Walter Tools The DNMA150612-RK5 WKK10S is an indexable turning insert optimised for machining cast iron, combining a coated carbide grade with a chipbreaker designed for short, brittle chips. Tiger·tec Silver coating for high abrasive resistance Optimised for cast iron (ISO group K) Rhombic 55° geometry with 1.2 mm corner radius RK5 chipbreaker for controlled chip formation Consistent performance for abrasive cast iron turning The insert from the Tiger·tec Silver series delivers a clear advantage when working with abrasive cast iron: the WKK10S grade is a coated carbide specifically tuned for the short, breaking chips and high abrasion typical of these materials. This translates into a longer effective cutting edge and fewer tool changes, which improves machine uptime and reduces process interruptions. The coating helps to limit flank wear under abrasive conditions, so the result is a more predictable tool life and stable cycle times on serial production. Where high abrasive resistance is required, a coated grade like this provides both economy and operational reliability. Reliable chip control and improved surface quality Chip control has a direct effect on safety, surface finish and cycle consistency. The engineered RK5 chipbreaker promotes small, easily evacuable chips when turning cast iron, reducing the risk of entanglement and improving operator safety. Coupled with the Rhombic 55° geometry, the insert enables versatile turning from semi-finishing to light finishing passes. The 1.2 mm corner radius increases edge robustness, helping to maintain a steady contact geometry and consistent surface quality across the part. These features together mean fewer rejected parts and a lower rework quota in everyday production. Process security and economical productivity A neutral/negative rake geometry (0° negative) contributes to edge strength during interrupted cuts and heavy engagement, offering improved resistance to chipping in demanding operations. The insert is manufactured to tolerance class M, supporting repeatable seating and accurate indexing in standard toolholders. As part of the Walter Tools Tiger·tec Silver family, this specification aims to balance wear resistance and toughness, supporting stable machining strategies and predictable tool-change intervals. For workshops targeting higher throughput with minimal process variation, this insert supports an efficient and secure production setup. For robust, repeatable cast-iron turning with Walter Tools, request the DNMA150612-RK5 WKK10S through Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice Technical data Article number: DNMA150612-RK5-WKK10S-WALTER Designation: DNMA150612-RK5 WKK10S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Plate form: Rhombic 55° Corner radius: 1.2 mm Size: 15 mm Rake angle: 0° (negative) Grade: WKK10S Tolerance class: M Special features Coating: Tiger·tec Silver Material: coated carbide Chipbreaker: RK5 Suitable for: cast iron (ISO group K) Execution: A FAQ What materials is the insert suited for? The DNMA150612-RK5 WKK10S is designed for machining cast iron (ISO group K) and matches the abrasive and short-chip characteristics of these materials. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKK10S grade increases resistance to abrasive wear, which helps to extend tool life and maintain consistent cutting performance on abrasive cast iron. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker promotes short, controlled chips that evacuate cleanly, improving surface finish and reducing chip-related interruptions during turning. Why choose a Rhombic 55° geometry for turning? A Rhombic 55° insert offers versatility across semi-finishing and finishing operations, balancing cutting edge exposure and strength for reliable surface quality. What role does the 1.2 mm corner radius play? The 1.2 mm corner radius increases edge robustness, reducing the likelihood of premature chipping and supporting steady contact conditions for a consistent finish. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision metalworking tools and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
DNMA150612-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from high wear resistance, optimised chip control and a stable cutting geometry for reliable cast iron turning. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. DNMA150612-RK5 WKK20S turning insert — Tiger·tec Silver grade, for cast iron by Walter Tools The DNMA150612-RK5 WKK20S is a rhombic 55° turning insert designed for efficient machining of cast iron, combining a robust coating and a short-chip breaker for productive turning operations High wear resistance thanks to Tiger·tec Silver coating RK5 chipbreaker for controlled, short chips Rhombus 55° form for versatile turning operations Optimised for cast iron machining Consistent performance on abrasive cast iron The combination of Tiger·tec Silver coating and the WKK20S grade delivers high wear resistance specifically tuned for abrasive cast iron. The coated cemented carbide composition mitigates flank wear and thermal softening, which translates into extended tool life and fewer index changes during batch runs. By addressing the typical short, brittle chips of cast materials, the insert reduces downtime for chip clearing and supports a steadier production rhythm. This technical alignment of coating and carbide grade results in a measurable improvement in process stability when turning grey or nodular cast irons. Geometry that improves surface quality and productivity A Rhombus 55° cutting geometry together with the RK5 chipbreaker and a corner radius 1,2 mm form a cutting package that balances strength and finish. The 0° (negativ) relief provides a secure cutting edge under interrupted cuts and heavy radial engagement, while the specified plate thickness 06 contributes to rigidity in the toolholder. These geometric choices lead to reduced vibration, a more consistent cutting force and improved surface finish on the workpiece. For planners and operators, this means fewer rework cycles and better adherence to tight tolerances in serial production. Easy integration and predictable tool life in the workshop Designed as an indexable insert for standard turning toolholders, the insert’s tolerance class M ensures repeatable seating and accurate positioning in the clamping system. The RK5 chip control supports automated machining cells by producing short, controllable chips that lower the risk of entanglement and machine stoppages. As an insert intended for cast iron applications, it suits both manual lathe work and CNC turning centres, offering an economical option where consistent component quality and dependable cycle times are required. The product SKU and series information facilitate straightforward stock management and reordering. Contact Metav Werkzeuge for application guidance on Walter Tools Tiger·tec Silver inserts or request a recommendation tailored to cast iron turning with the DNMA150612-RK5 WKK20S Technical data Article number: DNMA150612-RK5-WK K20S-WALTER SKU: DNMA150612-RK5-WKK20S-WALTER Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Execution: A Facts Shape: Rhombus 55° Size: 15 Thickness: 06 Corner radius: 1,2 mm Relief angle: 0° (negativ) Chipbreaker: RK5 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Material classification: K (cast iron) Suitable application: cast iron machining Designed for short, brittle chips typical of cast materials FAQ What materials is this insert suitable for? The DNMA150612-RK5 WKK20S is specifically optimised for cast iron machining, as indicated by the WKK20S grade and the RK5 chipbreaker. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKK20S grade increases wear resistance and thermal stability, which improves tool life and process reliability in cast iron turning. What does the RK5 chipbreaker provide? The RK5 chipbreaker produces short, controlled chips for safer chip management and reduced interruption in automated and manual turning operations. Is the insert suitable for interrupted cuts? Yes. The 0° (negativ) relief and the robust geometry make the insert resilient under interrupted cutting and heavy radial engagement. Which toolholders are compatible with this insert form? The Rhombus 55° form and the insert dimensions correspond to standard turning toolholders designed for DNMA-style inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMA150612-RK7 WKK10S Wendeplatten - Walter Tools
The coated carbide grade WKK10S in the Tiger·tec Silver series combines stable chip formation with robust wear resistance for reliable machining of cast iron; paired with the RK7 chipbreaker and a rhombic 55° geometry, this insert supports consistent surface quality and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMA150612-RK7 WKK10S turning insert for cast iron — Walter Tools (Tiger·tec Silver) The DNMA150612-RK7 WKK10S is a rhombic 55° indexable turning insert engineered for efficient, repeatable machining of cast iron components, offering a coated-carbide grade optimised for abrasive materials. Tiger·tec Silver coating for long life RK7 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning High-performance machining for cast iron with predictable results The coated-carbide grade WKK10S within the Tiger·tec Silver family is tailored to the demands of cast iron (ISO group K). Its formulation focuses on abrasion resistance and coping with the short, brittle chips typical of grey and nodular cast irons. As a result, the insert delivers stable chip formation and extended edge life, which reduces the frequency of index changes and supports throughput in production turning operations. This technical resilience translates into a lower cost per part and fewer unplanned interruptions during batch runs. Geometry and chip control for cleaner finishes and process security The rhombic 55° shape and the RK7 chipbreaker form a combination that balances versatility and chip control for a range of turning tasks. The insert’s corner radius 1.2 mm contributes to robust cutting edge strength for interrupted cuts, while the 0° negative rake promotes a secure seat in the toolholder and predictable cutting forces. Together these aspects result in consistent surface quality and simplified tool-setting routines, supporting reliable cycle times and repeatable results across similar workpieces. Coating technology and material match for extended tool life Tiger·tec Silver coating technology provides a protective multilayer that reduces adhesive and abrasive wear when machining abrasive cast irons. The grade is specified as a coated carbide type, optimised to maintain a stable cutting edge under thermal and mechanical loads typical of cast-iron turning. For shops seeking improved productivity, the coating-grade pairing offers the moral and technical assurance of reduced downtime and sustained performance over longer tool indexes. Integration into production and practical handling notes The insert is supplied in the DNMA150612-RK7 outline and fits toolholders designed for DNMA-style rhombic inserts; thickness and tolerances follow industrial norms for this format. Given its focus on cast-iron applications, the insert reduces the need for excessive process tuning: machining parameters can be standardised across batches, increasing operational efficiency. For mixed-material environments, selection of an alternative grade may be advised, but within cast-iron programmes this variant supports stable, high-quality results with predictable regrinding or indexing intervals. For machining tasks requiring robust performance in cast iron, request the Walter Tools DNMA150612-RK7 WKK10S through Metav Werkzeuge — technical advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: DNMA150612-RK7-WKK10S-WALTER Label: Drehwendeschneidplatte DNMA150612-RK7 WKK10S Walter Tools Manufacturer: Walter Tools Facts Size: 15 mm Corner radius: 1.2 mm Thickness code: 06 Free angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: RK7 Application: Cast iron (ISO group K) Material group designation: K (cast iron) FAQ What materials is this insert intended for? The DNMA150612-RK7 WKK10S is designed primarily for cast iron applications (ISO group K), where its Tiger·tec Silver coating and WKK10S grade offer abrasion-resistant performance. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker on this insert promotes controlled chip formation and reliable evacuation, assisting in achieving consistent surface finishes and reducing the risk of chip-related interruptions. Is the insert suitable for interrupted cuts? Yes. The rhombic 55° geometry combined with a corner radius of 1.2 mm and the negative free angle provides enhanced edge strength for interrupted and heavy-duty turning operations. Which toolholders are compatible with this insert form? Toolholders specified for DNMA-format rhombic 55° inserts accommodate this item; ensure the holder supports negative-rake inserts and the DNMA seating geometry for correct clamping. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DNMG110402-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the WEP10C cermet grade and the FP5 chipbreaker for consistent edge life and reliable chip control; combined with the rhombic 55° geometry and a 0.2 mm corner radius this insert supports precise finishing and productive turning. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice at info@metav-werkzeuge.com or +49 2822 7131930 DNMG110402-FP5 WEP10C — Turning insert (Drehwendeschneidplatte) by Walter Tools, Walter Cermet, FP5 chipbreaker The DNMG110402-FP5 WEP10C is a rhombic 55° turning insert intended for general and finishing turning where consistent edge life and controlled chip formation are priorities Walter Cermet grade WEP10C FP5 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning 0.2 mm corner radius for fine finishing Consistent performance from a cermet grade that extends edge life The choice of WEP10C cermet provides a stable cutting edge and improved wear resistance compared with conventional grades, which translates into longer tool life and fewer indexings. Cermet combines ceramic hardness with metallic toughness; this balance supports higher cutting speeds and a fine surface finish without excessive flank wear. For operations where repeatable part quality and reduced tool handling deliver cost savings, the WEP10C grade is a rational selection supported by Walter's material concept. Predictable chip control and geometry for productive turning The FP5 chipbreaker is designed to promote consistent chip formation under a range of feeds and depths of cut, helping to avoid long, stringy chips and minimising interruptions in the machining cycle. The rhombic 55° shape gives good access to shoulders and profiles while the negative 0° rake angle improves strength at the cutting edge for interrupted cuts. The combination of geometry and chipbreaker supports productive, steady machining and helps to achieve the dimensional and surface requirements expected in precision turning. Practical application guidance and compatibility notes This insert is finished with a 0.2 mm corner radius, favouring fine finishing passes and controlled corner strength. The tolerance class M and execution G indicate production-grade consistency suitable for series manufacturing. Material suitability should be verified against the manufacturer's product matrix; the insert is supplied in the Walter Cermet series and the catalogue lists the recommended workpiece materials. For seamless integration into existing toolholders, match the DNMG form factor and clamping system; the insert designation DNMG110402-FP5 identifies the plate geometry and size for straightforward replacement and tooling planning. Discuss application requirements with Metav Werkzeuge to select the optimal Walter Tools DNMG110402-FP5 WEP10C configuration and ensure a productive setup — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG110402-FP5-WEP10C-WALTER Designation: DNMG110402-FP5 WEP10C Series: Walter Cermet Grade: WEP10C Manufacturer: Walter Tools Facts Insert shape: Rhombus 55° Size: 11 Thickness: 04 Corner radius: 0.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: FP5 Material: Katalogabhängig Execution: G Insert type: DNMG110402-FP5 Series description: Cermet cutting material; check product matrix for material suitability FAQ What machining tasks suit this insert best? The DNMG110402-FP5 WEP10C insert from Walter Tools is suited to general turning and finishing where a cermet grade and an FP5 chipbreaker deliver consistent surface quality and long edge life. Can the WEP10C grade handle higher cutting speeds? Yes, the WEP10C cermet grade is formulated to support elevated cutting speeds while maintaining wear resistance, making it appropriate for operations that prioritise surface finish and productivity. How is chip control achieved with this insert? Chip control is achieved through the FP5 chipbreaker combined with the rhombic 55° geometry; this pairing promotes short, controllable chips across typical feed ranges. Which toolholders are compatible with DNMG110402-FP5? Compatibility follows the standard DNMG insert form factor; use toolholders specified for DNMG geometry and confirm clamping requirements before assembly. Is the corner radius suitable for roughing? The 0.2 mm corner radius is optimised for finishing and fine profiling; for heavy roughing, a larger radius or a different insert geometry is recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and designations are used solely for explanatory purposes and indicate no association between Metav Werkzeuge and the named manufacturers. The offered item is an original, brand-new product from the stated manufacturer.
DNMG110402-FP5 WPP10G FP5 Wendeplatten - Walter Tools
Efficient turning is achieved by combining the Tiger‑tec Gold coating with the FP5 chipbreaker to deliver stable chip control and extended tool life; the rhombic 55° geometry and 0.2 mm corner radius support precise finishing and secure clamping. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DNMG110402-FP5 WPP10G indexable turning insert — Tiger‑tec Gold coating, for steel (Walter Tools) The DNMG110402-FP5 WPP10G is a negative‑rake, rhombic 55° indexable insert engineered for steel turning applications, combining a high‑performance coating with a chipbreaker tuned for consistent machining results Tiger‑tec Gold coating for improved wear resistance FP5 chipbreaker for stable chip formation Rhombic 55° geometry with 0.2 mm corner radius Negative 0° relief for secure clamping and rigidity Consistent performance and reduced tooling cost per part The Tiger‑tec Gold technology and the WPP10G grade provide a balanced combination of wear resistance and toughness. The insert’s coated carbide substrate reduces flank and crater wear during continuous and intermittent cuts, which translates into longer tool life and fewer indexings. For production environments where repeatability is important, the improved wear behaviour lowers the cost per finished component and supports predictable tool change intervals, helping to maintain steady cycle times and reduce unscheduled stoppages. Stable chip control and reliable process security The engineered FP5 chipbreaker stabilises chip formation when machining steel, producing short, manageable chips across a range of cutting conditions. Combined with the negative 0° relief, the geometry increases clamping stability and reduces chatter risk on robust toolholders. The rhombic 55° form and 0.2 mm corner radius aid surface finish while allowing fine feeds for finishing operations. These features together ensure that machining remains productive and predictable, even under higher depths of cut typical in medium‑duty turning tasks. Precision geometry for versatile turning tasks Designed in the standard DNMG format, the insert offers compact dimensions—11 mm inscribed circle and a plate thickness of 0.4 mm—providing a precise cutting edge for fine finishing and semi‑finishing passes. The tolerance class M ensures consistent seat fit and repeatability in standard toolholders. As a coated indexable solution from Walter Tools, this insert is suitable where a reliable combination of surface quality and tool life is required for steel (P) machining, supporting both stable production runs and component quality requirements. For high‑productivity turning with a focus on process security, contact Metav Werkzeuge to discuss the Tiger‑tec Gold WPP10G range and the best grade for specific steel applications; Metav Werkzeuge’s technical team can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DNMG110402-FP5-WPP10G-WALTER Designation: DNMG110402-FP5 WPP10G Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core dimensions and tolerances Corner radius: 0.2 mm Free angle: 0° (negative) Plate form: Rhombus 55° Inscribed circle / size: 11 mm Plate thickness: 0.4 mm Tolerance class: M Materials, series and features Grade / coating: WPP10G (coated carbide) Chipbreaker: FP5 Suitable for: Steel (P) Execution: G FAQ What materials is this insert designed for? The DNMG110402-FP5 WPP10G insert is formulated for machining steel (P) and the WPP10G grade is optimised for the heat and chip characteristics typical of steel turning. How does the FP5 chipbreaker improve machining? The FP5 chipbreaker on the DNMG110402-FP5 promotes short, controlled chips and consistent chip evacuation, which enhances process stability and surface finish when turning steel. What are the key geometry details that affect finishing? The rhombic 55° form combined with a 0.2 mm corner radius and negative 0° relief gives a balance of edge strength and cutting precision, supporting fine feeds for improved surface quality. Is this insert compatible with standard DNMG toolholders? Yes, the DNMG110402-FP5 designation indicates standard DNMG geometry and tolerance class M, ensuring seat fit and repeatability in common DNMG holders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are quoted for explanation only and do not indicate any association between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
DNMG110402-FP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the FP5 chipbreaker for dependable chip control and consistent tool life; the result is efficient, repeatable steel turning with reduced downtime. Order the DNMG110402-FP5 WPP20G directly via Metav Werkzeuge or ask the consultants for application advice. Indexable turning insert DNMG110402-FP5 WPP20G — Tiger‑tec Gold, 0° (negative) rake, for steel | Walter Tools The DNMG110402-FP5 WPP20G is an indexable turning insert engineered for precise steel machining, offering a balanced mix of wear resistance and toughness within the Tiger‑tec Gold series. Tiger‑tec Gold coated carbide FP5 chipbreaker for reliable chips Rhombic 55° geometry for versatile turning 0.2 mm corner radius for fine finishes Consistent cutting performance for stable production The combination of the Tiger‑tec Gold coating and the WPP20G grade provides predictable wear behaviour and improved resistance to crater wear in steel applications. As a coated carbide insert, it is designed to maintain a sharp cutting edge under the thermal and mechanical stresses typical of ISO P materials, supporting higher process reliability and longer tool life. The emphasised outcome is fewer tool changes, less unscheduled downtime and a more consistent surface quality across production batches. Geometry and chip control that improve surface quality The Rhombic 55° shape together with the FP5 chipbreaker and a 0° (negative) rake angle creates controlled chip formation and stable cutting forces. The small 0.2 mm corner radius enables fine surface finishes while still offering sufficient edge strength for general turning operations. This geometry is particularly suitable for general-purpose turning where a balance between roughing capability and finish is required, reducing the need for tool swaps between operations. Specifically tuned for steel (ISO P) operations Built for machining steel, the insert’s substrate and coating combination focuses on the heat and chip characteristics of carbon and alloyed steels. The WPP20G grade is positioned as a universal choice within the Tiger‑tec Gold range, offering a compromise between wear resistance and toughness that makes it suitable for a wide variety of steel turning tasks. For process optimisation, pair the insert with a compatible tool holder and set feeds and depths according to machining strategy—this yields the best mix of productivity and component quality. Productivity advantages and brand reliability Using a high‑quality insert from Walter Tools helps streamline production by offering repeatable performance and reliable edge life. The Tiger‑tec Gold series supports consistent results across different batches and operators, contributing to predictable manufacturing costs and improved throughput. Investing in a grade that reduces rework and maintains surface integrity translates directly into lower overall machining costs and higher shopfloor efficiency. For tailored recommendations on toolholders and cutting parameters for Tiger‑tec Gold inserts, contact Metav Werkzeuge for expert advice and fast availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG110402-FP5-WPP20G-WALTER Designation: DNMG110402-FP5 WPP20G Product type: Indexable turning insert Grade: WPP20G (Tiger‑tec Gold) Chipbreaker: FP5 Brand: Walter Tools Core technical data Plate size: 11 mm Thickness: 4 mm Corner radius: 0.2 mm Free angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Materials & special features Suitable for: steel (ISO P) Coating: Tiger‑tec Gold (coated carbide) Execution: G Chip control: FP5 Series: Tiger‑tec Gold Sort: WPP20G FAQ Which materials is this insert intended for? The DNMG110402-FP5 WPP20G is intended primarily for steel (ISO P) applications; its substrate and Tiger‑tec Gold coating are optimised for the heat and chip behaviour of unalloyed and alloyed steels. What advantages does the FP5 chipbreaker provide? The FP5 chipbreaker on this insert promotes consistent chip segmentation and evacuation during turning, improving process stability and helping to protect the cutting edge against irregular loading. Can this insert achieve fine surface finishes? Yes. The combination of the 0.2 mm corner radius and the Rhombic 55° geometry supports fine finishing passes while maintaining sufficient edge strength for general turning tasks. Is the WPP20G grade suitable for mixed shop environments? WPP20G is a universal grade within the Tiger‑tec Gold range that balances wear resistance and toughness, making it suitable for a broad range of steel turning operations in mixed production settings. What is the primary benefit of the Tiger‑tec Gold coating? The Tiger‑tec Gold coating enhances wear resistance and reduces friction at the cutting edge, which contributes to longer tool life and more consistent surface quality on steel components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any affiliation between our company and the named brands. The offered article is original, brand‑new goods supplied by the manufacturer.
DNMG110404-FM5 WMP20G FM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a dedicated FM5 chipbreaker to ensure consistent chip control and a stable cutting edge when machining stainless steels; order directly via Metav Werkzeuge or consult our specialists for process optimisation. DNMG110404-FM5 WMP20G indexable turning insert — Tiger·tec Gold, for stainless steels — Walter Tools The DNMG110404-FM5 WMP20G is a coated carbide turning insert designed for reliable roughing and medium finishing of stainless steels, combining a robust chip control geometry with a fine 0.4 mm nose radius for consistent surface quality. Tiger·tec Gold coated grade WMP20G Optimised FM5 chipbreaker for stable chips Rhombic 55° form for versatile toolholders 0.4 mm nose radius for dependable surface finish Consistent performance on stainless steels for stable production The Tiger·tec Gold-coated carbide grade delivers a predictable combination of wear resistance and toughness suited to stainless steels, which are prone to work hardening and edge build-up. The coated cutting surface helps to reduce built-up edge and thermal softening, improving tool life under moderate to robust cutting conditions. As a result, process reliability is increased and unplanned tool changes become less frequent, supporting steady machining cycles and higher overall productivity. Precision geometry for repeatable quality and easy tool set-up The rhombic 55° geometry and negative 0° relief provide a secure seating in common indexable holders and help maintain cutting stability during interrupted cuts. The 0.4 mm nose radius balances strength and finish capability: larger radii aid tool life, while this radius still enables acceptable surface integrity for many turning tasks. Clear geometry simplifies insert selection and reduces set-up time, helping workshops maintain consistent component tolerances with minimal adjustments. FM5 chipbreaker and chip control to lower machining risk The FM5 chipbreaker is engineered to produce short, controllable chips when turning stainless steels, reducing the risk of entanglement and improving swarf evacuation. Controlled chip formation minimises surface damage and protects the cutting edge, which in turn reduces vibration and improves batch-to-batch consistency. For production environments seeking predictable results, the combination of chipbreaker design and coated carbide substrate supports continuous operation and fewer interruptions. Integration and practical advantages for workshop routines The ISO designation and standard DNMG form factor make the insert compatible with a wide range of holders and tool systems, allowing straightforward integration into existing tool sets. The coated carbide composition gives a balanced performance for medium-duty applications, while the insert size and thickness adhere to common industrial dimensions for ease of replacement. This reduces inventory complexity and helps planners match tooling to component requirements without extensive requalification. Contact Metav Werkzeuge for tailored cutting advice on the DNMG110404-FM5 WMP20G from Walter Tools; our consultants will recommend optimal feeds and speeds — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: DNMG110404-FM5-WMP20G-WALTER Product name: Drehwendeschneidplatte DNMG110404-FM5 WMP20G Manufacturer: Walter Tools Grade: WMP20G Series: Tiger·tec Gold Core specifications Insert form: Rhombic 55° Corner radius: 0.4 mm Insert size: 11 Thickness: 04 Free angle: 0° (negative) Chipbreaker: FM5 Tolerance class: M Features Coating: Tiger·tec Gold Substrate: coated carbide Application: rostfreier Stahl (stainless steels) ISO designation: DNMG110404-FM5 WMP20G Execution: G FAQ What materials is this insert intended for? The DNMG110404-FM5 WMP20G insert from Walter Tools is optimised for machining stainless steels, providing controlled chip formation and reduced edge build-up under typical stainless cutting conditions. What does the WMP20G grade indicate? WMP20G denotes Walter Tools’ coated carbide grade within the Tiger·tec Gold family; it combines a protective coating with a substrate tuned for toughness and wear resistance suitable for rostfreier Stahl. How does the FM5 chipbreaker improve machining? The FM5 chipbreaker creates short, manageable chips and supports stable cut evacuation, which protects the cutting edge and improves surface finish when turning stainless steels with this insert. Is the insert compatible with standard DNMG toolholders? Yes — the rhombic 55° form and ISO designation DNMG110404-FM5 allow use in commonly available indexable turning holders designed for DNMG inserts. What role does the 0.4 mm nose radius play? The 0.4 mm nose radius offers a compromise between edge strength and surface finish capability, making the insert suitable for a range of roughing to medium-finishing operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG110404-FM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of the WMP20S grade with Tiger·tec Silver technology and a FM5 chipbreaker for reliable machining of stainless steel; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG110404-FM5 WMP20S turning indexable insert — Tiger·tec Silver for stainless steel | Walter Tools DNMG110404-FM5 WMP20S is a rhombic-turning insert designed for medium to robust machining of stainless steel, offering a secure chipflow and consistent edge stability Tiger·tec Silver coating for high process security WMP20S grade optimised for stainless steel Negative rake 0° for robust cutting forces 0.4 mm corner radius for versatile finishing Maximised process reliability when turning stainless steel The combination of the WMP20S carbide grade and the Tiger·tec Silver surface technology supports stable chip formation when machining austenitic and other stainless steels. The metallurgical design reduces the tendency for built-up edge and thermal softening, which in turn maintains cutting-edge integrity over longer tool life. For production environments where consistent cycle times matter, this insert improves process predictability and contributes to fewer unplanned tool changes. Consistent surface quality and predictable tool life With a FM5 chipbreaker and a 0.4 mm corner radius, the insert balances chip control with surface finish, enabling reliable results in both semi-finishing and finishing passes. The negative rake 0° geometry increases edge strength under heavy cuts, reducing the risk of chipping on interrupted cuts. These characteristics translate into improved component quality and lower rework rates, supporting more efficient downstream operations. Easy integration and practical handling in turning operations The rhombic 55° form and standard DNMG designation allow straightforward integration into common toolholders and turning systems. The insert thickness and seat dimensions conform to industry standards, simplifying tool inventory and changeover. Operators will benefit from a familiar mounting routine while process engineers gain a tool that performs under varying cutting parameters, enabling faster setup and reduced machine downtime. Manufacturer performance and application guidance Produced by a recognised specialist in precision tooling, this insert is suited to diverse stainless steel applications under medium to robust cutting conditions. For cutting data and parameter windows tailored to specific alloys or machine types, Metav Werkzeuge provides technical consultation to align feed, speed and depth of cut with expected surface and productivity targets. Practical support helps translate the insert’s properties into measurable shop-floor advantages. For tailored advice on Walter Tools turning solutions and to discuss application-specific recommendations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical consultants will assist with selection and integration. Technical Data SKU: DNMG110404-FM5-WMP20S-WALTER Article designation: DNMG110404-FM5 WMP20S Product type: Turning indexable insert (DNMG 110404) Manufacturer: Walter Tools Key measurements Insert form: Rhombus 55° Corner radius: 0.4 mm Relief angle: 0° (negative) Insert size: 11 Thickness: 04 Materials & features Grade: WMP20S (Tiger·tec Silver) Chipbreaker: FM5 Coating/technology: Tiger·tec Silver Application: stainless steel Series: Tiger-tec Silver Tolerance class: M Execution: G FAQ What materials is this insert best suited for? This DNMG110404-FM5 WMP20S insert from Walter Tools is optimised for machining stainless steel, offering secure chip control and edge stability in medium to robust conditions. How does the Tiger·tec Silver technology help in production? Tiger·tec Silver coating on the WMP20S grade improves thermal resistance and reduces adhesion on the cutting edge, which increases process reliability and extends tool life in challenging stainless steel operations. What does the FM5 chipbreaker deliver in practice? The FM5 chipbreaker provides predictable chip formation and supports consistent surface quality, making it suitable for both semi-finishing and finishing passes when using the DNMG110404-FM5 insert. Is the geometry compatible with standard toolholders? Yes, the rhombus 55° form and DNMG designation ensure compatibility with common holders and facilitate straightforward tool changes on conventional lathes and turning centres. Walter Tools — The Walter AG (marketed as Walter Tools) is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only and do not indicate any affiliation between our company and the mentioned manufacturers.
DNMG110404-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of a high-performance, wear-resistant insert that ensures stable chip formation and reliable machining of demanding alloys; benefit from the combination of WSM01 grade and Tiger‑tec Silver surface engineering for consistent production results — order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110404-FM5 WSM01 indexable turning insert, rhombus 55° geometry, Tiger‑tec Silver coating — Walter Tools The DNMG110404-FM5 WSM01 is a precision indexable turning insert designed for productive machining of stainless and high-temperature alloys in demanding industrial applications. Tiger‑tec Silver coating for wear resistance WSM01 grade suited for tough alloys and rostfreier Stahl Rhombus 55° geometry for versatile turning operations FM5 chipbreaker for controlled chip formation High process stability for difficult-to-machine alloys The WSM01 grade, combined with the Tiger‑tec Silver surface treatment, delivers improved resistance to thermal and mechanical wear when machining heat-resistant alloys. This configuration is especially effective on rostfreier Stahl and superalloys, where poor thermal conductivity and material toughness often lead to rapid edge degradation. The result is consistent cutting performance and fewer unplanned tool changes, which contributes directly to greater machine uptime and predictable batch quality. Controlled chip formation and predictable tool life Equipped with the FM5 chipbreaker, the insert promotes stable chip formation, reducing interruptions from long, entangling chips and improving surface finish. The coating reduces built-up edge and friction at the cutting zone, which helps maintain a sharp edge for longer periods. For production environments that prioritise throughput, this combination supports repeatable cycle times and a measurable reduction in scrap and rework, improving overall process economy. Geometry engineered for setup ease and precision The rhombus 55° shape with a corner radius 0.4 mm and negative 0° relief offers a balance between robustness and cutting precision. The geometry allows stable engagement in a wide range of turning operations while the modest corner radius gives a reliable edge for finishing passes. As an indexable insert, it simplifies insert changes and indexing, enabling fast set-ups and consistent part tolerances across batches — a practical advantage for shops aiming for lean and reproducible workflows. Contact Metav Werkzeuge for application-specific recommendations, availability and to discuss how the DNMG110404-FM5 WSM01 from Walter Tools can be integrated into existing turning processes; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DNMG110404-FM5-WSM01-WALTER Designation: DNMG110404-FM5 ISO designation: DNMG110404-FM5 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Product type: Drehwendeschneidplatte Material group (tool): S / M Facts Geometry: Rhombus 55° Relief angle: 0° (negative) Corner radius: 0.4 mm Inscribed circle / size: 11 mm Thickness: 4 mm Chipbreaker: FM5 Tolerance class: M Special features Coating: Tiger‑tec Silver Material suitability: rostfreier Stahl, superalloys / titanium alloys Application focus: heavy-duty and heat-resistant material machining Series characteristics: wear-resistant, process-stable cutting grade FAQ What materials is this insert suitable for? The DNMG110404-FM5 WSM01 insert is specified for machining rostfreier Stahl and high-temperature alloys; the Walter Tools WSM01 grade supports secure chip formation in these groups. What does the FM5 chipbreaker achieve? The FM5 chipbreaker on this turning insert controls chip shape and evacuation, improving surface finish and reducing interruptions during continuous turning operations with the DNMG110404-FM5 WSM01. Can this insert be used for finishing passes? Yes; the rhombus 55° geometry with a corner radius of 0.4 mm and negative 0° relief delivers sufficient edge stability for finishing and semi-finishing with consistent dimensional accuracy. Is the coating beneficial for long runs? The Tiger‑tec Silver coating enhances wear resistance and reduces built-up edge, which supports longer tool life and more stable performance in extended production runs using the DNMG110404-FM5 WSM01. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DNMG110404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Reliable performance for demanding turning tasks thanks to the combination of a wear-resistant grade and the Tiger·tec Silver coating, delivering stable chip formation and extended tool life; order the insert directly via Metav Werkzeuge or request tailored cutting data from the technical team. Drehwendeschneidplatte DNMG110404-FM5 WSM10S – indexable turning insert with Tiger·tec Silver coating, negative 0° relief, rhombic 55° form, Walter Tools Drehwendeschneidplatte DNMG110404-FM5 WSM10S is an indexable insert designed for turning operations in stainless steels and heat-resistant alloys, combining a robust cutting grade with a dedicated FM5 chipbreaker for predictable chip control. Tiger·tec Silver coating for thermal stability and wear resistance WSM10S grade for stainless steels and superalloys Rhombic 55° form for versatile turning applications 0.4 mm corner radius for controlled edge life Consistent results in stainless steel and superalloy turning The combination of the WSM10S grade and the Tiger·tec Silver coating provides thermal stability and improved wear resistance when machining stainless steels and superalloys. This indexable insert is tailored to cope with materials that generate high heat and tend to work-harden; the chosen grade supports secure chip formation and helps maintain a stable cutting edge, reducing unscheduled rework and improving process reliability. The negative 0° relief geometry contributes to a robust cutting edge suited to interrupted cuts and roughing applications. Geometry and chip control that aid productivity A rhombic 55° form combined with the FM5 chipbreaker ensures consistent chip splitting and evacuation across a range of cutting conditions. The 0.4 mm corner radius balances strength and finish capability: it gives the edge enough bulk to resist chipping while allowing acceptable surface quality in many turning operations. For users less familiar with chipbreaker technology, this geometry reduces the need for constant parameter adjustments and supports higher metal removal rates with predictable outcomes. Cost-effectiveness through durable materials and design Built around a coated carbide substrate from Walter Tools, the insert emphasises long tool life and repeatable performance. The wear-resistant coating decreases flank and crater wear, meaning fewer indexings and less downtime for tool changes. Given the grade’s focus on difficult-to-cut materials, the insert supports productive machining strategies that can lower unit costs over medium to long production runs without compromising on dimensional consistency. Practical application notes and compatibility The insert is compatible with standard DNMG toolholders and is identified by the designation DNMG110404-FM5 WSM10S. Its form and chipbreaker suit a variety of turning tasks, from profile finishing to heavier roughing where toughness and edge stability are priorities. When integrating into a production process, consider optimising cutting speeds and feeds for the workpiece alloy; for stainless and heat-resistant alloys, strategies that avoid excessive rubbing and favour controlled cutting will extend tool life and maintain surface integrity. Contact Metav Werkzeuge for specific cutting data, availability and tailored recommendations for the DNMG110404-FM5 WSM10S insert and related tooling solutions Technical data Article number: DNMG110404-FM5-WSM10S-WALTER SKU: DNMG110404-FM5-WSM10S-WALTER Designation: DNMG110404-FM5 WSM10S Numbers / Core technical data Shape: Rhombus 55° Relief angle: 0° (negative) Corner radius: 0.4 mm Plate size: 11 Plate thickness: 04 Special features / Versions Grade: WSM10S Coating / series: Tiger·tec Silver Chipbreaker: FM5 Tolerance class: M Execution: G FAQ What materials is this insert suitable for? The DNMG110404-FM5 WSM10S insert is designed primarily for stainless steels (ISO group M) and heat-resistant superalloys (ISO group S), providing stable cutting performance in these demanding materials. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating increases thermal resistance and reduces wear, which helps the insert maintain a stable cutting edge and longer service life when machining high-temperature materials. What does the FM5 chipbreaker do? The FM5 chipbreaker promotes reliable chip control and fragmentation, improving evacuation and reducing the risk of entanglement during turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mentioned brand Walter Tools is stated for clarification; there is no affiliation between our company and the brand owners. The offered item is an original, factory-new product of the manufacturer.
DNMG110404-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver performance, a robust FM5 chipbreaker and a compact rhombic geometry to ensure consistent machining of stainless steel and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG110404-FM5 WSM20S – Turning insert, rhombic 55° geometry, Walter Tools The DNMG110404-FM5 WSM20S is a negative‑rake rhombic turning insert designed for stable, repeatable turning of stainless steel and high‑temperature alloys in demanding production environments Tiger‑tec Silver coating for high thermal resistance WSM20S grade for stainless steel and superalloys Rhombic 55° form for stable cutting engagement High thermal stability for challenging materials The Tiger‑tec Silver coating combined with the WSM20S grade offers elevated thermal resistance and improved edge life when machining tough alloys. This combination reduces the frequency of index changes and supports longer uninterrupted cycles, which directly benefits throughput and tool cost per part. The formulation is engineered to manage heat and reduce adhesion on the cutting edge, delivering stable cutting edge performance even under heavy apportioning of cutting forces Geometry tuned for reliable chip formation A Rhombus 55° outline and the FM5 chipbreaker produce predictable chip shapes and controlled evacuation in continuous and interrupted cuts. The insert’s 0° (negative) relief increases edge strength while the 0.4 corner radius balances robustness with fine surface finish potential. These geometry choices reduce the risk of edge chipping and support consistent component quality, translating technical parameters into reliable shop‑floor results Process security and consistent productivity With tolerance class M and the S / M material suitability, the grade supports stainless steel and heat‑resistant superalloys where machinability challenges demand dependable inserts. The tool’s construction and coating philosophy focus on repeatable performance and reduced downtime, contributing to higher overall equipment effectiveness. For complex batches or novel alloys, technical advice is available to match cutting data and extend insert life without compromising cycle times or surface quality Contact Metav Werkzeuge for tailored cutting data and order Walter Tools DNMG110404-FM5 WSM20S inserts to secure process stability and higher productivity in stainless steel applications Technical Data Article number: DNMG110404-FM5-WSM20S-WALTER Label: Drehwendeschneidplatte DNMG110404-FM5 WSM20S Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Chipbreaker: FM5 Facts Plate form: Rhombus 55° Relief angle: 0° (negativ) Corner radius: 0.4 Plate size: 11 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Silver Material suitability: S / M Application focus: stainless steel and heat‑resistant alloys Manufacturer: Walter Tools Execution code: G ISO designation: DNMG110404-FM5 WSM20S FAQ What materials is this insert suitable for? The DNMG110404‑FM5 WSM20S is designed for stainless steel and heat‑resistant superalloys, utilising the Tiger‑tec Silver coating and WSM20S grade for thermal stability How does the FM5 chipbreaker help in production? The FM5 chipbreaker produces controlled chips and reliable evacuation, improving process security and reducing the chance of recutting or surface defects during turning Why choose a negative relief (0°) geometry? A 0° (negative) relief increases edge strength and resistance to chipping, offering superior reliability in interrupted cuts and when machining tough materials Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are used solely for explanatory purposes; there is no affiliation between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer.
DNMG110404-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of proven cermet performance and stable chip control for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists for process alignment. DNMG110404-FP5 WEP10C – Turning insert, FP5 chipbreaker, Walter Tools The DNMG110404-FP5 WEP10C is a cermet turning insert engineered for precision finishing and reliable chip formation in general turning applications. Walter Cermet grade WEP10C FP5 chipbreaker for stable chips Rhombic 55° geometry for versatile turning 0° negative rake for robust cutting Precision finishing with a dedicated cermet grade The insert combines a cermet cutting grade with a geometry designed to deliver consistent surface quality during finishing passes. The choice of WEP10C targets stable cutting edges at moderate cutting speeds, helping to reduce rework and improve batch uniformity. Specified tolerance M supports repeatable seating in toolholders and predictable dimensional outcomes, which is essential for shops aiming for reproducible results and minimal process variation. Stable chip control that supports uninterrupted production Built around the FP5 chipbreaker, the insert offers controlled chip formation even when conditions vary slightly. Good chip control reduces the risk of entanglement and machine interruptions, improving overall throughput. This feature, together with the cermet substrate, contributes to extended edge life, reducing the frequency of insert changes and supporting uninterrupted production runs without compromising part finish. Geometry and robustness for everyday machining The Rhombus 55° form and 0° negative rake provide a balance between accessibility to workpiece geometry and cutting robustness. The small corner radius 0.4 mm offers a fine edge for finishing without sacrificing edge strength, while the compact size (11) and plate thickness (04) suit common turning toolholders. The geometry is engineered for stable engagement, making the insert a pragmatic choice where consistent removal rates and surface integrity are required. Selection and integration into existing processes As part of the Walter Cermet series, the WEP10C grade should be evaluated against the specific component material and cutting conditions; suitability is best confirmed via the manufacturer's product matrix. Walter Tools' expertise supports predictable process reliability, and Metav Werkzeuge can advise on grade choice and clamping options to match machining strategies. For component designers and workshop managers seeking dependable finishing inserts, this grade offers a practical blend of surface performance and robustness. For precision finishing and reliable chip control with Walter Tools' cermet inserts, contact Metav Werkzeuge for availability and tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG110404-FP5-WEP10C-WALTER Article name: DNMG110404-FP5 WEP10C Manufacturer: Walter Tools Series: Walter Cermet Execution: G Core specifications Insert size: 11 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: M Features Chipbreaker: FP5 Grade: WEP10C (cermet) Plate form: Rhombus 55° Base designation: DNMG110404-FP5 FAQ What applications suit this cermet insert? The DNMG110404-FP5 WEP10C turning insert is intended for finishing and applications requiring consistent surface quality; suitability for specific materials should be checked against the manufacturer's matrix. How does the FP5 chipbreaker influence machining? The FP5 chipbreaker promotes stable chip formation and reduced entanglement, which helps maintain continuous production and better surface integrity with the WEP10C grade. Can this insert be used for heavy roughing operations? This insert is optimised for finishing and medium-duty cuts; heavy roughing demands should be evaluated separately and may require a different geometry or grade. What does the 0° (negative) relief angle mean in practice? A 0° negative relief angle increases cutting robustness and edge strength, making the insert more tolerant to interrupted cuts while maintaining surface quality. How to confirm the right grade for a specific material? Check the Walter Cermet product matrix for the WEP10C grade and consult Metav Werkzeuge or the manufacturer for application-specific recommendations. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer Walter Tools.
DNMG110404-FP5 WKP01G WKP01G Wendeplatten - Walter Tools
Benefit from the durable Tiger‑tec Gold coating and the WKP01G carbide grade for extended tool life on steel and cast iron; the FP5 chipbreaker and rhombic 55° geometry provide dependable chip control and consistent surface quality. Order the DNMG110404-FP5 WKP01G directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110404-FP5 WKP01G – Indexable Turning Insert (for Steel & Cast Iron) by Walter Tools The DNMG110404-FP5 WKP01G is a rhombic 55° indexable turning insert with Tiger‑tec Gold coating, built for productive turning of steel (P) and cast iron (K) across a wide range of workshop applications. Tiger‑tec Gold coating for high wear resistance For steel (P) and cast iron (K) machining Rhombic 55° geometry for versatile turning 0.4 mm corner radius for secure edge strength Proven wear resistance for uninterrupted production The coated carbide grade combines the Tiger‑tec Gold technology with the WKP01G substrate to deliver stable cutting performance and extended tool life. This coating system reduces flank and crater wear under the thermal and mechanical loads typical when machining steel and cast iron, which translates into fewer tool changes and improved uptime. The tolerance class M ensures consistent insert seating and repeatable performance in tool holders, supporting stable process parameters and predictable component quality. Accurate chip control and improved surface finish Equipped with the FP5 chipbreaker and a rhombic 55° form, the insert provides controlled chip formation for a broad range of turning tasks. The chip geometry promotes short, manageable chips when machining both P and K materials, reducing the risk of entanglement and protecting the machined surface. The 0° negative clearance geometry increases cutting edge robustness, making this insert suitable where reliability and surface integrity are priorities. Compact format for flexible tool system integration The DNMG format offers a compact yet rigid insert geometry that adapts well to many toolholders and turning applications. With a plate size of 11 and the common thickness code 04, the insert fits standard clamping systems and helps to consolidate tooling inventories. Using a single, versatile grade for both steel and cast iron simplifies tool management and reduces the number of different inserts required on the shop floor, supporting cost efficiency and faster setup times. Contact Metav Werkzeuge today for tailored recommendations on the Walter Tools Tiger‑tec Gold DNMG110404-FP5 WKP01G and expert guidance on selecting the ideal insert for specific turning tasks. Technical Data Article number / SKU: DNMG110404-FP5-WKP01G-WALTER Label: Drehwendeschneidplatte DNMG110404-FP5 WKP01G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP01G Chipbreaker: FP5 Shape: Rhombic 55° Free angle: 0° (negativ) Corner radius: 0,4 Facts Plate size: 11 Plate thickness code: 04 Corner radius: 0.4 mm Tolerance class: M Special features Coating: Tiger‑tec Gold Material suitability: P / K (steel and cast iron) Execution: G Series/brand: Tiger‑tec Gold Designation without grade: DNMG110404-FP5 FAQ Which materials is this insert suited for? The DNMG110404-FP5 WKP01G by Walter Tools is designed for machining steel (P) and cast iron (K) according to the ISO grouping indicated for the WKP01G grade. What advantage does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the DNMG110404-FP5 WKP01G improves wear resistance and thermal stability, resulting in longer tool life and more consistent cutting performance on demanding turning operations. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on this insert promotes controlled chip formation and evacuation, enhancing surface finish and reducing the chance of chip-related interruptions during turning of both steel and cast iron. What does the 0.4 mm corner radius mean in practice? A 0.4 mm corner radius provides a balance between edge strength and the ability to produce acceptable surface quality; it helps to withstand intermittent loads while maintaining good finish quality in many turning tasks. Is the insert compatible with standard clamping systems? The DNMG format and the specified tolerance class M ensure compatibility with common toolholders, enabling straightforward integration into existing turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory‑new product of the manufacturer.
DNMG110404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, reliable FP5 chip control and robust rhombic geometry for stable steel turning operations — order directly via Metav Werkzeuge or consult our specialists for application support. DNMG110404-FP5 WPP10G — Turning indexable insert, Tiger‑tec Gold (Walter Tools) The DNMG110404-FP5 WPP10G is a rhombic 55° turning insert designed for precision steel machining, offering a Tiger‑tec Gold coating and a robust FP5 chipbreaker for consistent results. Tiger‑tec Gold coated for long tool life Optimised for steel machining (ISO P) Rhombic 55° form with 0.4 mm corner radius Negative rake 0° for robust cutting Stable cutting performance for steel components The Tiger‑tec Gold coated indexable insert provides a balance between wear resistance and toughness that is particularly suited to machining steel. The WPP10G grade is formulated to handle the heat and chip formation typical of steel turning, which reduces flank wear and extends tool life, resulting in fewer insert changes and more consistent cycle times. This makes the insert a pragmatic choice where process reliability and predictable replacement intervals matter. Geometry and chip control that protect the tool and part With its Rhombic 55° outline and the FP5 chipbreaker, the insert promotes controlled chip formation and evacuation even on medium-depth cuts. The 0.4 mm corner radius supports edge robustness and helps maintain dimensional stability on turned features, while the 0° negative rake delivers cutting-edge strength for interrupted cuts and heavier cross-sections. Together these attributes reduce the risk of edge chipping and improve surface quality on finished components. Boosted productivity through predictable performance Adopting this turning insert contributes to higher productivity by delivering repeatable cutting behaviour over extended tool life. The reliable geometry and coating support stable cutting parameters, which in turn enable tighter process windows and less downtime for tool changes. Where cycle time and consistency are priorities, the insert’s combination of wear-resistant coating and robust chip control supports continuous machining with fewer interruptions. Coating and material explanation for selection confidence The Tiger‑tec Gold technology combines a coated carbide substrate optimised for steel applications, resulting in improved wear resistance without sacrificing toughness. The WPP10G grade is particularly effective across a wide range of steel alloys, addressing the thermal and mechanical demands of turning. Understanding these material and coating characteristics simplifies tool selection and helps ensure the chosen insert matches both the machining strategy and the material to be turned. For robust, high‑productivity turning with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for product availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG110404-FP5-WPP10G-WALTER Designation: DNMG110404-FP5 WPP10G Product type: Turning indexable insert Manufacturer: Walter Tools SKU: DNMG110404-FP5-WPP10G-WALTER Facts Size: 11 Thickness: 4 mm Corner radius: 0.4 mm Rake angle: 0° (negative) Form: Rhombus 55° Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP10G Chipbreaker: FP5 Material group suitability: Steel (ISO P) Series: Tiger‑tec Gold Execution: G FAQ What materials is this insert suitable for? The DNMG110404-FP5 WPP10G insert is specified for steel machining (ISO P) and is optimised for typical steel heat and chip formation behaviours. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and tool life, helping maintain consistent cutting performance over longer runs. Is the insert geometry suitable for interrupted cuts? Yes, the rhombic 55° geometry combined with a 0° negative rake offers robust cutting edges that perform well under interrupted conditions. Which chipbreaker is integrated and what is its advantage? The integrated FP5 chipbreaker is designed for controlled chip formation and reliable evacuation, supporting stable surface finishes and reduced recutting. Can this insert maintain dimensional stability on small features? The 0.4 mm corner radius and stable insert geometry contribute to dimensional consistency on turned features while providing edge strength for longer tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for clarification purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG110404-FP5 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a purpose-designed FP5 chipbreaker and precise 0.4 mm corner radius to improve cycle times and surface finish; order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110404-FP5 WPP20G indexable turning insert for steel – Walter Tools DNMG110404-FP5 WPP20G is a coated indexable turning insert designed for stable, productive turning of steel components in workshop and production environments. Tiger·tec Gold coating for long tool life Optimised FP5 chipbreaker for steel machining Rhombic 55° shape for versatile turning 0.4 mm corner radius for fine finishing Increased productivity through coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance of wear resistance and toughness that is optimised for machining steel. Coated carbide inserts reduce flank and crater wear under the thermal and mechanical loads typical of steel turning, which means longer tool life and fewer indexings. The result is measurable improvements in process economy: higher cutting speeds and extended edge life translate into lower part cost per component while maintaining consistent dimensional results. Better chip control and surface quality The integrated FP5 chipbreaker is configured to promote stable chip formation when cutting steel, reducing built-up edge and the risk of surface defects. When paired with the rhombic 55° geometry and a 0.4 mm corner radius, the insert allows fine finishing passes with reliable edge strength. This geometry supports predictable cutting forces, which helps maintain machine spindle stability and yields a superior surface finish on turned parts, reducing the need for secondary operations. Practical geometry and application flexibility A 0° negative rake combined with the rhombic indexable shape provides robust performance in interrupted cuts and general turning tasks. The insert's tolerances and execution class M / G ensure repeatable positioning in toolholders and predictable tool life across production batches. For workshop planners, this means fewer adjustments, consistent part quality and reduced downtime during insert changes. The insert is particularly suitable for unalloyed and alloyed steels as indicated by its P material application classification. For high process reliability with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored machining recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG110404-FP5-WPP20G-WALTER Designation: DNMG110404-FP5 WPP20G Type: indexable turning insert Brand: Walter Tools Core specifications Shape: Rhombus 55° Size: 11 Thickness: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Tolerance class: M Materials & features Grade / coating: Tiger·tec Gold, WPP20G Chipbreaker: FP5 Material application: Steel Execution: G Series: Tiger-tec Gold FAQ What steels are suitable for this insert? The DNMG110404-FP5 WPP20G insert by Walter Tools is specified for machining steels (material group P), including unalloyed and alloyed grades; the WPP20G grade balances wear resistance and toughness for typical steel turning tasks. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on this insert promotes controlled chip formation when turning steel, helping to avoid long, stringy chips and improving surface finish and tool life for finishing and medium-duty operations. Can the insert handle interrupted cuts? Yes. The rhombic 55° geometry combined with a 0° negative rake and the solid coating offers robust edge strength suitable for interrupted cuts and general turning applications. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a balance between edge strength and the ability to achieve finer surface finishes; it is well suited to finishing and light turning passes without sacrificing durability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
DNMG110404-FW5 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, consistent chip control and precise geometry for dependable turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG110404-FW5 WKP01G turning insert – Tiger‑tec Gold, FW5 chipbreaker | Walter Tools The DNMG110404-FW5 WKP01G is a rhombic 55° turning insert designed for productive machining of steel and cast iron in general turning applications Tiger‑tec Gold coating for robust wear resistance Designed for Steel and Cast Iron machining Rhombic 55° shape with 0.4 mm corner radius FW5 chipbreaker for controlled chip formation Sustained performance across steel and cast‑iron work The WKP01G grade, part of the Tiger‑tec Gold family, is developed for a balance of wear resistance and toughness when machining P (steel) and K (cast iron) groups according to ISO classification. The combination of a coated carbide substrate and the specific microstructure of this grade reduces abrasive wear on continuous and interrupted cuts, which leads to longer tool life and fewer insert changes during a production shift. In practical terms, this provides more predictable cycle times and reduced machine downtime for batch and series production. Precise chip control for safer, faster turning Controlled chip formation is central to stable, high‑productivity turning. The FW5 chipbreaker is tuned to generate short, manageable chips on a wide range of feeds and cut depths, improving swarf evacuation and reducing the risk of tangling. With a 0° (negative) relief geometry and optimised edge preparation, the insert keeps cutting forces steady and helps maintain surface integrity. The result is consistent component quality with a lower need for rework and less operator intervention. Geometry and edge design that support accuracy The rhombic 55° plate form combined with a 0.4 mm corner radius provides a versatile compromise between strength and accessibility into contours. The geometry suits general turning tasks where form follow‑up and dimensional control are required. A small corner radius improves edge strength on interrupted cuts while still allowing relatively fine finishes; conversely, the robust shape supports higher depths of cut where material removal rate is a primary goal. This makes the insert suitable for both roughing and finishing steps when process parameters are matched. Integration into productive tool systems and workflows As an ISO‑designated grade in a widely used insert format, the component fits common toolholders and mounting systems, simplifying inventory and tool management. The negative relief insert ensures secure seating and repeatable indexability, which promotes efficient changeovers and traceable tool life documentation. Combined with the grade’s characteristics, this supports stable machining parameters, contributing to predictable throughput and reduced scrap rates in manufacturing environments. For application advice or to request delivery of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored support and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG110404-FW5-WKP01G-WALTER Article designation: DNMG110404-FW5 WKP01G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WKP01G Plate form: Rhombus 55° Chipbreaker: FW5 Facts Corner radius: 0.4 mm Relief angle: 0° (negative) Insert size: 11 Thickness code: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold Material application: Steel (P) Material application: Cast iron (K) Execution: G Coated carbide grade, optimised for wear resistance Suitable for general turning operations FAQ What materials are best suited for this insert? The DNMG110404-FW5 WKP01G is formulated for machining steel (P) and cast iron (K); the Tiger‑tec Gold coating and WKP01G grade address typical wear and chip behaviour in these groups. How does the FW5 chipbreaker improve the process? The FW5 chipbreaker promotes short, controlled chips and consistent evacuation, which enhances safety, reduces swarf issues and supports uninterrupted production cycles with fewer stoppages. Can this insert be used for finishing operations? Yes, the rhombic 55° geometry with a 0.4 mm corner radius provides a balance between edge strength and surface quality, allowing use in both semi‑finishing and finishing passes when parameters are adjusted. Is the insert compatible with standard toolholders? The DNMG form is a standard ISO geometry and will fit holders designed for DNMG inserts; the negative relief ensures repeatable, secure seating for accurate indexing. What advantages does the Tiger‑tec Gold series provide? Tiger‑tec Gold coating enhances thermal stability and wear resistance, delivering longer tool life and consistent performance across a broad range of turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected marks are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
DNMG110404-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, a Tiger·tec Gold coated grade and optimised chip control for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. DNMG110404-FW5 WPP10G indexable turning insert — Tiger·tec Gold, FW5 chipbreaker — Walter Tools The DNMG110404-FW5 WPP10G is a rhombic 55° indexable turning insert designed for reliable steel machining with a coated carbide grade optimised for general and wear-resistant steel applications. *Tiger·tec Gold coating for enhanced wear resistance *Optimised FW5 chipbreaker for reliable chip control *0° negative rake for stable cutting conditions *Rhombic 55° form with 0.4 mm corner radius Maximise productivity in steel turning with a proven grade The Tiger·tec Gold WPP10G grade delivers a balance between wear resistance and toughness that makes it well suited for a wide range of steel turning operations. By combining a coated carbide matrix with an engineered surface treatment, the insert reduces flank and crater wear under typical ISO P conditions. The result is longer tool life and fewer interruptions for index changes, which translates directly into higher component throughput and lower machining costs per part. Accurate geometry and secure cutting behaviour for stable processes With a rhombic 55° geometry and a 0.4 mm corner radius, the insert provides reproducible engagement and strong edge support when taking moderate to heavy cuts. The 0° negative rake promotes a robust cutting edge that resists chipping in interrupted cuts and hard spots. Such geometry choices support predictable force directions and make tool setup and process planning more reliable, especially in automated or lights-out production. Consistent chip control and surface quality through the FW5 chipbreaker The dedicated FW5 chipbreaker is engineered to form compact, controllable chips when machining steel grades. Good chip control reduces the risk of surface damage and improves safety at higher feed rates. In addition, the coated surface reduces built-up edge formation, helping to maintain a consistent surface finish and dimensional stability over multiple indexings. For operations prioritising repeatability, this combination supports consistent part quality. Practical use cases and integration into production This turning insert is aimed at job shops and production lines working primarily with steel components requiring a balance of wear resistance and toughness. Typical applications include medium-duty finishing and mixed production runs where process security and tool life are decisive. The grade and chipbreaker combination facilitates straightforward process tuning: once cutting parameters are set for a given material group, the insert yields repeatable results with minimal rework. Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger·tec Gold inserts and to discuss suitable insert geometries for specific steel grades Technical Data Article number: DNMG110404-FW5-WPP10G-WALTER Designation: DNMG110404-FW5 WPP10G Product type: Indexable turning insert (turning) Brand: Walter Tools Series: Tiger·tec Gold Facts Insert size: 11 mm Thickness: 4 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: FW5 Insert form: Rhombic 55° Execution: G Application group: Steel (ISO P) FAQ What materials is this insert best suited for? The DNMG110404-FW5 WPP10G insert is specified for steel (ISO P) applications; the Tiger·tec Gold grade is balanced for wear resistance and toughness in unalloyed and alloyed steels. How does the FW5 chipbreaker improve machining? The FW5 chipbreaker on this Walter Tools insert promotes compact, controllable chips during turning, which improves surface quality and reduces the risk of chip entanglement. Can the insert handle interrupted cuts or mixed operations? Yes, the 0° negative rake and robust edge geometry make the insert resistant to chipping in interrupted cuts and suitable for mixed production where reliability is required. What parameters should be checked when switching to this grade? Start from recommended feed and speed ranges for ISO P materials and monitor cutting forces and surface finish; the WPP10G grade benefits from moderate to high cutting speeds thanks to its coating technology. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and clarification purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
DNMG110404-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP20G grade for consistent tool life and controlled chip formation; the robust FW5 chipbreaker and rhombic 55° geometry ensure productive turning of steel components. Order directly via Metav Werkzeuge or consult their technical team for application-specific advice. DNMG110404-FW5 WPP20G turning insert — Tiger‑tec Gold coated, 0° negative rake, Walter Tools DNMG110404-FW5 WPP20G is a rhombic 55° turning insert intended for ISO P steel machining, offering a balanced solution for medium to high cutting demands Tiger‑tec Gold coated carbide grade WPP20G FW5 chipbreaker for reliable chip control Rhombic 55° geometry with 0° negative rake Designed for ISO P steel machining High process reliability for steel turning The combination of the Tiger‑tec Gold coating and the WPP20G carbide grade creates a wear‑resistant cutting edge that improves tool life in steel applications. The coated carbide optimises thermal and mechanical resistance, which translates into steadier cutting conditions and fewer tool changes. For production environments where predictable performance matters, this insert supports a constant machining rhythm and helps reduce unscheduled stoppages. Precise chip control and surface quality The FW5 chipbreaker and rhombic 55° geometry work together to shape chips effectively and reduce the risk of interruption or tool damage. The 0° negative rake increases edge strength for interrupted cuts and tougher materials, while the corner radius 0.4 mm contributes to a consistent surface finish. For less experienced users: a chipbreaker is a groove or form on the insert top that breaks long chips into manageable segments, improving safety and machine availability. Compatibility, mounting and tolerance guidance This indexable turning insert fits standard toolholders designed for DNMG geometry; the designation confirms profile and seating compatibility. The tolerance class M indicates a standard manufacturing precision suitable for general turning tasks. The plate thickness and format ensure secure clamping in conventional holders, supporting repeatable results in batch production. For clamping, always use holders matched to DNMG inserts to guarantee correct seat location and cutting geometry. Application focus and selecting the right grade Rated for ISO P materials (steel), the insert is aimed at unalloyed and alloyed steels where a mix of wear resistance and toughness is required. The grade distribution (10 wear‑resistant, 20 universal, 30/35 tougher) positions this solution as broadly applicable. For machining strategies that demand a balance between economy and productivity, the coated grade offers extended life and consistent edge behaviour, making it suitable for both serial production and job shop work. If further guidance is required on feeds, speeds or toolholder selection, Metav Werkzeuge provides application support via email or phone: info@metav-werkzeuge.com, +49 2822 7131930. For tailored recommendations on Walter Tools Tiger‑tec Gold turning inserts and to secure reliable supply, contact Metav Werkzeuge for application advice and rapid fulfilment Technical data SKU: DNMG110404-FW5-WPP20G-WALTER Designation: DNMG110404-FW5 WPP20G Product type: Turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Plate shape: Rhombus 55° Rake angle: 0° Corner radius: 0.4 mm Plate size: 11 Plate thickness: 04 Chipbreaker: FW5 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Material application: Steel (ISO P) Execution: G Balanced wear resistance and toughness FAQ What materials is this insert intended for? The insert is specified for ISO P materials; the WPP20G grade and the Tiger‑tec Gold coating are optimised for machining steel. What does WPP20G mean for performance? WPP20G denotes a Walter Tools coated carbide grade designed to combine wear resistance with versatility; in practice it gives longer tool life and consistent cutting behaviour in steel turning. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker shapes chips to reduce entanglement and promote smoother evacuation, improving process stability and enhancing surface quality when used with the correct cutting parameters. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases edge strength and is advantageous for interrupted or tougher turning applications where edge robustness is required. Which toolholders are compatible with this insert? The DNMG designation indicates compatibility with standard DNMG‑type holders; matching the holder to the insert size and seat geometry is essential for accurate and repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG110404-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating with the WSM20S grade and the FW5 chipbreaker to achieve stable cutting edges and predictable chip control in demanding turning operations; benefit from the Rhombus 55° geometry and 0.4 mm corner radius for consistent surface quality and longer tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific cutting data. DNMG110404-FW5 WSM20S — Turning indexable insert, Tiger·tec Silver (Walter Tools) DNMG110404-FW5 WSM20S is a high-performance turning insert designed for demanding machining of stainless steels and heat‑resistant superalloys. Tiger·tec Silver coating for wear resistance Grade WSM20S optimised for difficult alloys Rhombic 55° geometry with 0.4 mm radius Negative 0° relief and FW5 chipbreaker Optimised grade and coating for challenging materials The combination of the WSM20S grade with the Tiger·tec Silver coating delivers enhanced thermal stability and wear resistance when machining tough materials such as stainless steels and superalloys. This insert supports stable edge formation under elevated temperatures, which reduces the risk of built‑up edge and extends effective cutting life. The result is fewer tool changes, more predictable machining cycles and a measurable improvement in process efficiency for serial production. Geometry designed for consistent chip control and surface quality The Rhombus 55° form and the 0.4 mm corner radius produce a reliable cutting geometry that balances strength and finish capability. The FW5 chipbreaker is engineered to produce short, controllable chips under a wide range of depths of cut, improving swarf evacuation and reducing the likelihood of surface damage. A negative 0° relief increases insert robustness on interrupted cuts and hard workpieces, delivering stable results even in tougher turning applications. Process reliability that supports productivity and reproducibility By combining a modern coating system with a purpose‑built chipbreaker and a robust insert shape, this indexable solution promotes consistent part quality and predictable tool performance. The insert’s features are particularly suitable for sectors requiring repeatability — for example, aerospace and precision engineering where stable cutting edge behaviour and reliable chip control are essential. Application data and cutting parameters are available to adapt the insert to specific machine and material combinations, enabling an efficient, low‑risk integration into existing turning processes. Contact Metav Werkzeuge for tailored cutting data and application advice to maximise the performance of Walter Tools Tiger·tec Silver WSM20S inserts Technical Data SKU: DNMG110404-FW5-WSM20S-WALTER Designation: DNMG110404-FW5 WSM20S Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Core Specifications Insert size: 11 Form: Rhombus 55° Corner radius: 0.4 mm Relief angle: 0° (negative) Thickness: 04 Tolerance class: M Materials & Special Features Grade: WSM20S (coated carbide) Chipbreaker: FW5 Suitable for: stainless steels (M) and superalloys/titanium (S) Coating technology: Tiger·tec Silver Execution: G FAQ Is this insert suitable for machining stainless steels? Yes. The DNMG110404-FW5 WSM20S insert from Walter Tools is formulated for stainless steels (ISO group M), offering improved edge stability and reduced built‑up edge tendency. What advantage does the FW5 chipbreaker provide? The FW5 chipbreaker produces short, controllable chips and promotes consistent swarf evacuation; this improves surface finish and reduces the risk of chip entanglement during turning. How does the negative 0° relief affect performance? A negative 0° relief increases insert robustness on heavy or interrupted cuts, enhancing resistance to edge chipping and supporting secure machining of tougher materials. What does the WSM20S grade mean? WSM20S is a Walter Tools coated carbide grade within the Tiger·tec Silver family, optimised for heat and wear resistance when machining difficult‑to‑cut alloys such as stainless steels and superalloys. Can this insert be used for finishing and roughing operations? Yes. The Rhombus 55° geometry and 0.4 mm corner radius make the insert versatile; the cutting parameters and depth of cut determine whether the insert is used for finishing or more aggressive roughing tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and Walter Tools. The offered item is original, factory‑new goods from the manufacturer.
DNMG110404-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of high abrasion resistance and reliable chip control for efficient cast‑iron turning; combine the Tiger‑tec Silver coating and the WKK10S grade for long tool life and predictable performance. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. DNMG110404-MK5 WKK10S turning insert — Rhombic 55°, for cast iron | Walter Tools A DNMG110404-MK5 WKK10S turning insert designed for productive finishing and medium‑turning of cast iron, featuring the Tiger‑tec Silver coating and an MK5 chipbreaker for controlled chips and consistent surface finish Tiger‑tec Silver coating for high wear resistance Optimised for cast iron with MK5 chipbreaker Rhombic 55° geometry for versatile turning 0° negative rake with 0.4 mm corner radius Improved productivity through optimised coating and grade The combination of the Tiger‑tec Silver coating and the WKK10S grade delivers a balance between wear resistance and toughness specifically for cast iron machining. That technical pairing reduces abrasive wear and extends tool life, which in turn supports longer uninterrupted production runs and fewer insert changes. The result is a measurable improvement in process efficiency and predictable component quality. Consistent chip control and geometry that supports versatile applications Equipped with the MK5 chipbreaker and a Rhombic 55° platform, this insert provides reliable chip segmentation for common cast‑iron chip shapes. The negative rake 0° geometry and 0.4 mm corner radius help maintain edge stability during finishing passes, reducing vibration and improving surface integrity. For workshops seeking repeatable results, these features simplify parameter setting and lower the risk of unexpected tool change‑overs. Practical handling and application notes for shops and production The insert’s form factor and robust grade make it suitable for a wide range of turning tasks in foundry and machining environments where cast iron predominates. Because the grade is optimised for abrasive wear and the MK5 breaker is tuned to brittle, short chips, set‑up times are shortened and process windows widen. When integrating this insert into existing toolholders, verify seat and clamping compatibility and follow standard safety and clamping procedures. Manufacturer reliability and suitability for demanding processes Manufactured under the Walter Tools portfolio, the insert benefits from tested coating technology and validated grade assignment for cast iron applications. The WKK10S grade is intended to offer consistent performance across common grey and compacted graphite cast irons, enabling predictable tool life and repeatable surface finish — factors that contribute to stable production and lower overall machining cost per part. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice and availability of Walter Tools inserts Technical Data SKU: DNMG110404-MK5-WKK10S-WALTER Designation: DNMG110404-MK5 WKK10S Product type: Turning insert (indexable insert) Series: Tiger‑tec Silver Grade: WKK10S Core data Plate shape: Rhombus 55° Relief angle: 0° (negative) Corner radius: 0.4 mm Plate size: 11 mm Plate thickness: 04 Special features Coating: Tiger‑tec Silver Chipbreaker: MK5 Material suitability: Cast iron (K) Tolerance class: M Execution: G Suitable for abrasive wear and short, breaking chips FAQ Is this insert suitable for all types of cast iron? The DNMG110404‑MK5 WKK10S turning insert by Walter Tools is formulated for a broad range of cast‑iron materials; the WKK10S grade and Tiger‑tec Silver coating are optimised for abrasive wear typical of grey and compacted graphite cast irons. How does the MK5 chipbreaker influence cutting performance? The MK5 chipbreaker on this DNMG110404‑MK5 WKK10S insert promotes controlled chip formation in brittle materials, improving surface finish and reducing the likelihood of chip entanglement in production turning operations. Can the insert be used for roughing as well as finishing? While the insert performs well in finishing and medium‑cutting operations thanks to its 0° relief and 0.4 mm corner radius, roughing suitability depends on cutting parameters and machine stability; the grade is optimised for wear resistance rather than extreme heavy‑cut conditions. What geometry considerations are important when selecting toolholders? Select a toolholder that matches the Rhombic 55° seat and provides secure clamping for inserts of this designation; correct clamping ensures the negative rake and corner radius translate into stable cutting behaviour and consistent results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
DNMG110404-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, extended tool life from Tiger·tec Silver coating and the robust MK5 chipbreaker for consistent productivity in cast iron turning; order the insert directly via Metav Werkzeuge or contact the consultants for application-specific cutting data. DNMG110404-MK5 WKK20S indexable turning insert by Walter Tools – Tiger·tec Silver, for cast iron The DNMG110404-MK5 WKK20S is an indexable turning insert engineered for efficient and repeatable machining of cast iron components, combining a Tiger·tec Silver coating with an MK5 chipbreaker for stable chip formation. Tiger·tec Silver coating for longer life Optimised for cast iron machining Rhombic 55° geometry for versatile turning Corner radius 0.4 mm for fine surface finish Consistent chip control and process stability for cast iron The DNMG110404-MK5 WKK20S insert delivers stable chip formation through its dedicated MK5 chipbreaker, which is optimised for the short, brittle chips typical of cast iron. This results in fewer interruptions, reduced risk of built-up edge and improved surface quality on the workpiece. The combination of chipformer and geometry supports higher material removal rates while maintaining machining reliability, making the insert suitable for serial production and demanding single-part work. Durable coating technology that reduces tooling costs Equipped with Tiger·tec Silver technology, the grade WKK20S offers a balanced performance between wear resistance and toughness for abrasive cast iron grades. The advanced coating reduces flank wear and extends life, translating into longer tool cycles and fewer index changes. For production planners, this means predictable replacement intervals and a lower overall cost per component when compared with uncoated or older coating generations. Geometry designed for versatility and surface quality The rhombic 55° shape and 0.4 mm corner radius provide a versatile cutting edge suitable for a range of turning tasks, from light finishing to medium roughing. The 0° negative rake helps maintain edge strength when cutting interrupted or abrasive cast iron surfaces, reducing the chance of chipping under shock loads. Operators benefit from a consistent surface finish and reduced rework requirements due to the insert’s robust edge integrity. Practical benefits for workshop integration and planning With a clearly defined ISO designation and tolerance class M, the insert integrates smoothly into standard toolholders and production schedules. The serial character of the Tiger·tec Silver family means predictable behaviour across batches, supporting process standardisation and easier tool management. For engineering teams, the insert’s specification enables straightforward selection for cast iron applications and quick comparison with alternative grades when optimising cycle times. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools DNMG110404-MK5 WKK20S inserts Technical data Article number: DNMG110404-MK5-WKK20S-WALTER Label: Drehwendeschneidplatte DNMG110404-MK5 WKK20S Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) ISO designation: DNMG110404-MK5 WKK20S Manufacturer: Walter Tools Facts Plate form: Rhombus 55° Plate size: 11 Plate thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Special features Series: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MK5 Suitable for: cast iron Version: G Tolerance class: M FAQ What materials is this insert suitable for? The DNMG110404-MK5 WKK20S is specified for machining cast iron and its grade and chipbreaker are optimised for abrasive, short-chip behaviour found in these materials. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the WKK20S grade increases wear resistance and edge life, resulting in longer tool cycles and more predictable replacement intervals for Walter Tools turning inserts. Which chipbreaker is fitted and what is its advantage? This insert uses the MK5 chipbreaker, designed to generate compact, controlled chips in cast iron and reduce the likelihood of chip-related interruptions. Is the geometry suitable for finishing work? The rhombic 55° form together with the 0.4 mm corner radius supports fine surface finishes while maintaining sufficient edge strength for moderate cutting conditions. Can this insert be used in standard toolholders? Yes; the ISO designation DNMG110404-MK5 WKK20S and tolerance class M allow compatibility with conventional indexable turning toolholders designed for DNMG inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools) is a globally recognised manufacturer of precision cutting tools. The Walter Tools brand represents high process security, precise machining and reliable tool life. Protected trademarks and trade names are the property of their respective owners. Brand names are used for identification and explanatory purposes only. The offered article is original, factory-new merchandise of the manufacturer.
DNMG110404-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, MM5 chip control and a Rhombus 55° geometry for reliable machining of stainless steel; order directly via Metav Werkzeuge or consult the team for tailored recommendations. DNMG110404-MM5 WMP20G turning insert — Walter Tools, Tiger·tec Gold, for stainless steel The DNMG110404-MM5 WMP20G is a rhombic 55° turning insert designed for medium to robust machining of stainless steel, offering a coated hardmetal grade tuned for secure chip formation and process stability. Tiger·tec Gold coating for long life Optimised MM5 chipformer 0.4 mm corner radius for strength Rhombus 55° geometry for versatile turning Negative relief angle 0° for stable cutting Longer tool life and thermal stability from advanced coating The combination of Tiger·tec Gold and the WMP20G grade gives a pronounced improvement in edge durability when machining stainless steel. The multilayer coating reduces flank wear and supports higher cutting temperatures, which translates into fewer tool changes and improved uptime. For production environments that prioritise steady cycle times, this coating technology helps maintain cutting-edge integrity under the thermal stresses typical of stainless turning operations, delivering a measurable increase in process efficiency. Precise chip control and geometry for dependable results The insert’s MM5 chipformer and Rhombus 55° shape yield controlled chip breaking and predictable chip flow, which is particularly valuable when working with tough, ductile materials. The 0.4 mm corner radius balances edge strength and surface finish, while the negative 0° relief angle contributes to a stable cutting edge under interrupted or heavy cuts. Together, these geometry choices reduce the risk of built-up edge and support consistent dimensional accuracy during longer tool life cycles. Productivity and process security suited to daily production Manufactured by Walter Tools, this indexable solution focuses on process reliability and repeatable performance. The combination of a tailored grade, robust chip control and a stable insert form supports continuous production with fewer quality fluctuations. For shops aiming to raise throughput without sacrificing surface integrity, the insert offers a pragmatic balance between process security and productivity, reducing downtime and simplifying grade selection across stainless steel turning tasks. For machining stainless steel with Walter Tools’ proven Tiger·tec Gold technology, contact Metav Werkzeuge for product availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: DNMG110404-MM5-WMP20G-WALTER Product: Turning insert DNMG110404-MM5 WMP20G Brand: Walter Tools Series: Tiger-tec Gold Core specifications Size: 11 Thickness: 4 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Plate form: Rhombus 55° Chipbreaker: MM5 Materials & special features Grade: WMP20G Coating: Tiger·tec Gold Suitable for: stainless steel Application range: medium to robust cutting conditions Tolerance class: M FAQ Which materials is this insert intended for? The DNMG110404-MM5 WMP20G is designed primarily for stainless steel; the WMP20G grade and Tiger·tec Gold coating support secure chip formation and wear resistance when machining stainless materials. How does the MM5 chipformer improve turning performance? The MM5 chipformer promotes short, controllable chips and stable evacuation under typical stainless turning conditions, helping to reduce built-up edge and maintain surface quality when using this DNMG insert. What are the key dimensions and geometry of this insert? The insert features a size designation of 11, a thickness of 4 mm and a corner radius of 0.4 mm; it uses a Rhombus 55° form with a negative 0° relief angle, suitable for versatile turning operations. Is this insert better for roughing or finishing operations? The WMP20G grade and MM5 chip control provide a compromise between robustness and surface finish, making the insert suitable for both medium roughing and finish passes in stainless steel, depending on cutting parameters. Which toolholders accept this insert style? This DNMG-style turning insert fits standard DNMG-compatible toolholders and indexable turning systems; the Rhombus 55° form allows flexible seatings in many common turning toolholders. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for descriptive purposes only. The offered item is an original, factory-new product of the manufacturer. There is no affiliation between our company and the referenced brands. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com