DNMG110412-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of a high-performance combination: a Tiger·tec Silver coating for extended edge life, a robust RM5 chipbreaker for secure chip formation, and a geometry tailored to stable turning of rostfreier Stahl — order directly via Metav Werkzeuge or consult our technical team for machining parameters. DNMG110412-RM5 WMP20S — Turning indexable insert with Tiger·tec Silver for rostfreier Stahl (Walter Tools) The DNMG110412-RM5 WMP20S is a rhombic 55° turning insert designed for reliable finishing and medium-to-robust roughing operations on rostfreier Stahl, combining a coated carbide grade with a controlled-chip RM5 geometry. Tiger·tec Silver coated for long edge life Optimised for rostfreier Stahl (ISO M) Rhombic 55° geometry for stable turning 1.2 mm corner radius for secure chip control Greater process security through advanced coating and grade The Tiger·tec Silver coating together with the WMP20S carbide grade provides a consistent wear pattern and improved thermal resistance, which translates into longer tool life and fewer tool changes. For workshops aiming to increase machine uptime, the combination of a wear-resistant surface and a carbide substrate ensures stable cutting edges even under elevated temperatures typical of rostfreier Stahl machining. The controlled microstructure of the coating reduces adhesive wear and delays the onset of flank wear, so cycle times stay predictable and tool-change planning becomes simpler. Reliable chip control and surface quality when machining rostfreier Stahl A dedicated RM5 chipbreaker and a 1.2 mm corner radius are designed to manage the challenging chip behaviour of rostfreier Stahl, which tends to form long, stringy chips and to adhere to cutting edges. The RM5 geometry promotes chip segmentation and evacuation, lowering the risk of built-up edge and improving surface finish. The negative 0° relief angle reinforces the cutting edge and aids in interrupted cuts or variable depth passes; this results in fewer stoppages for manual intervention and a more consistent part finish during serial production. Practical benefits for workshop integration and productivity The rhombic 55° insert form balances accessibility for profiling and face turning with a robust cutting edge for heavier cuts. As an indexable insert it simplifies inventory management: a single toolholder can accept multiple edges, reducing the number of dedicated tools required. The insert’s series and grade characteristics support predictable performance on rostfreier Stahl, helping planners to estimate tool life and machining costs with greater confidence. For further assistance with cutting data, holders or recommended feeds and speeds, Metav Werkzeuge’s technical advisers are available by e‑mail or telephone. For machining rostfreier Stahl with proven reliability, contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Silver inserts or request specific cutting parameters via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: DNMG110412-RM5-WMP20S-WALTER Designation: DNMG110412-RM5 WMP20S Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: RM5 Numerical data Plate size: 11 Plate thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Materials & special features Suitable for rostfreier Stahl Coating: Tiger·tec Silver Execution: G Material group: M FAQ What materials is this insert suitable for? The DNMG110412-RM5 WMP20S insert is optimised for rostfreier Stahl (ISO M) and performs reliably under medium to robust cutting conditions. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver on the WMP20S grade increases thermal resistance and wear stability, which extends tool life and reduces flank wear when turning rostfreier Stahl. What advantages does the RM5 chipbreaker provide? The RM5 chipbreaker promotes chip segmentation and controlled evacuation, lowering built-up edge formation and improving surface finish in rostfreier Stahl applications. Why is a 0° negative relief angle used on this insert? A negative 0° relief reinforces the cutting edge for interrupted cuts and heavy engagement, improving edge strength and process stability during demanding turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for identification and explanation only. There is no connection between our company and the named brands; the offered article is an original, factory-new product of the manufacturer.
DNMG110412-RM5 WSM20S RM5 Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM20S grade ensures stable cutting edges and reliable chip control in demanding stainless and heat‑resistant alloy turning; the RM5 chipbreaker and negative 0° rake contribute to predictable tool life and consistent surface quality. Order genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG110412-RM5 WSM20S — Indexable turning insert, Tiger·tec Silver (Walter Tools) The DNMG110412-RM5 WSM20S is an indexable turning insert designed for heavy-duty machining of stainless steels and heat‑resistant alloys, offering a rhombic 55° geometry for versatile cutting applications. Tiger·tec Silver coating for heavy-duty turning RM5 chipbreaker for reliable chip control Rhombic 55° geometry, 1.2 mm corner radius Negative 0° rake for stable cutting edge High‑temperature coating for tough materials and longer tool life The combination of the Tiger·tec Silver coating and the WSM20S grade is engineered for machining difficult‑to‑cut materials. Coating technology improves wear resistance and reduces adhesion when working with stainless steels and superalloys, which tend to generate heat and cause built‑up edge. This results in more predictable tool life and fewer unscheduled tool changes, supporting continuous production and higher overall productivity. The enhanced substrate and coating pairing is a practical choice where process stability is a priority. Geometry that secures edge strength and surface quality The rhombic 55° form with a corner radius 1.2 mm and negative 0° rake provides a robust cutting edge that resists chipping under intermittent engagement and heavy feeds. A larger corner radius distributes cutting forces over a broader area, improving surface finish on turned components while reducing the risk of premature edge breakdown. The negative rake angle contributes to mechanical strength at the cutting edge, making this insert suitable for interrupted cuts and demanding turning operations. Controlled chip formation for efficient machining The RM5 chipbreaker is tailored to produce short, manageable chips when turning materials that otherwise form long, springy swarf. Improved chip control reduces cycle interruptions and minimises the need for additional chip handling measures at the machine, contributing to safer, more efficient shopfloor operation. With consistent chip shape and evacuation, coolant and feed strategies can be optimised to maintain dimensional stability and part quality. Application guidance and process benefits This grade is specified for M and S groups according to ISO 513, covering stainless steels and heat‑resistant alloys including titanium families. When paired with appropriate cutting parameters and toolholder rigidity, the insert supports reproducible results and extended operational sequences. Using the DNMG geometry in suitable holders allows straightforward index changes and rapid re‑engagement in production, reducing setup time and improving overall throughput. Contact Metav Werkzeuge for tailored tooling advice and secure genuine Walter Tools Tiger·tec Silver inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG110412-RM5-WSM20S-WALTER Designation: DNMG110412-RM5 WSM20S Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Execution: G Facts Corner radius: 1.2 mm Plate size: 11 Plate thickness: 04 Tolerance class: M Relief / rake angle: 0° (negative) Chipbreaker: RM5 Special features Coating: Tiger·tec Silver Substrate/grade: WSM20S (coated carbide) Geometry: Rhombic 55° Material suitability: S / M (heat‑resistant alloys / stainless steels) Suitable for heavy‑duty and demanding turning applications FAQ What materials is this insert designed to machine? The DNMG110412-RM5 WSM20S from Walter Tools is specified for ISO groups M and S, making it suitable for stainless steels and heat‑resistant superalloys. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker on the WSM20S grade produces compact chips and improves evacuation, which reduces interruptions and supports smoother turning cycles with the Walter Tools insert. Is the negative 0° rake suitable for interrupted cuts? Yes, the negative 0° rake and the rhombic geometry increase edge strength and resilience, so the insert handles interrupted cuts and heavy engagement more reliably. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and reduces adhesion tendency on difficult materials, extending tool life and maintaining surface quality during extended runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of Walter Tools. The Walter AG (market presence: Walter Tools) is part of the Sandvik group and is recognised for precision tooling products and reliable tool performance.
DNMG110412-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the RP5 chipbreaker for reliable chip control and extended tool life; the rhombic 55° geometry and 1.2 mm corner radius combine versatility with consistent surface finish. Order the DNMG110412-RP5 WPP05G directly via Metav Werkzeuge or ask our consultants if needed. DNMG110412-RP5 WPP05G — Tiger·tec Gold indexable turning insert for steel (Rhombus 55°) by Walter Tools A DNMG110412-RP5 WPP05G indexable turning insert designed for general steel turning, combining the Tiger·tec Gold coating with a dedicated RP5 chipbreaker for productive and stable machining. Tiger·tec Gold coating for longer life Designed for steel machining (ISO P) Rhombus 55° geometry for versatile turning RP5 chipbreaker for controlled chip formation Achieve consistent productivity with advanced coating and edge preparation The Tiger·tec Gold series delivers a coated carbide grade engineered for a broad range of steel applications (ISO P). The advanced layer system reduces flank wear and improves thermal resistance, which in practice means fewer insert changes and longer uninterrupted production. Combined with the 1.2 mm corner radius, the geometry supports stable cutting forces and smoother surface finish, making this insert a dependable choice for batch production and single-part machining alike. Precise chip control and geometry for reliable turning performance Equipped with the RP5 chipbreaker, this insert promotes predictable chip formation and evacuation during medium to heavy turning operations. The rhombic 55° shape gives a favourable entry angle for general turning tasks, permitting varied cutting depths while preserving workpiece accuracy. The negative rake (0°) contributes to a robust cutting edge, reducing the risk of edge chipping when encountering interrupted cuts or tougher material zones. Operational benefits, toolholder compatibility and process impact Tolerance class M and the standard DNMG form make the insert compatible with a wide range of toolholders, facilitating fast tooling changes and minimising set-up time. Because the grade is optimised for steel, machinists can expect a balance between wear resistance and toughness across typical production speeds. Clear labelling and standard ISO designation simplify tool management and inventory control in professional shops. For precise steel turning applications, specify the Tiger·tec Gold DNMG110412-RP5 WPP05G from Walter Tools and contact Metav Werkzeuge for tailored cutting data and quick delivery — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: DNMG110412-RP5-WPP05G-WALTER Name: Drehwendeschneidplatte DNMG110412-RP5 WPP05G Walter Tools Type: Indexable turning insert Core specifications Geometry: Rhombus 55° Corner radius: 1.2 mm Free angle: 0° (negative) Size code: 11 Thickness code: 04 Tolerance class: M Design & special features Series: Tiger·tec Gold Grade / Sort: WPP05G Chipbreaker: RP5 Material group suitability: Steel (ISO P) Coated carbide (beschichtetes Hartmetall) Designation without grade: DNMG110412-RP5 FAQ What materials is this insert suited for? The DNMG110412-RP5 WPP05G is optimised for steel machining (ISO P) and delivers balanced wear resistance and toughness for typical steel grades. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, improving surface finish and reducing recutting of chips. What does the 55° rhombic geometry mean for tool use? Rhombus 55° geometry gives flexibility in turning operations, allowing varied cutting depths while maintaining a stable cutting edge and good access to workpiece features. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG form factor and tolerance class M make it compatible with most standard DNMG toolholders used for indexable turning inserts. What benefits does the Tiger·tec Gold series provide? Tiger·tec Gold coating improves thermal resistance and flank wear properties, which extends tool life and reduces downtime for insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DNMG110412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, RP5 chip control and robust rhombic geometry to achieve longer tool life and predictable turning of steels; order the insert directly via Metav Werkzeuge or consult the specialists for application guidance. DNMG110412-RP5 WPP10G Drehwendeschneidplatte — Rhombus 55°, 1.2 mm nose radius, Walter Tools The DNMG110412-RP5 WPP10G is an indexable turning insert designed for reliable steel machining in general turning and finishing applications, part of the Tiger‑tec Gold series. Tiger‑tec Gold coated carbide grade WPP10G Optimised RP5 chipbreaker for steel Rhombic 55° shape for versatile turning 1.2 mm nose radius, 0° negative rake Longer, more predictable tool life through coated grade technology The WPP10G grade from the Tiger‑tec Gold family is a coated carbide formulation optimised for machining steels (ISO group P). Its coating and substrate combination reduce wear rates under the thermal and mechanical loads typical of steel turning, which results in longer tool life and more consistent cutting performance. For production environments, that durability lowers the frequency of insert changes and helps maintain stable cycle times, improving overall efficiency. Steadier machining and improved surface finish from optimised chip control The built-in RP5 chipbreaker is developed to secure consistent chip control, reducing the likelihood of entangling chips and minimising re-cutting. The rhombic 55° geometry provides flexibility for a range of turning operations while the 1.2 mm nose radius supports edge strength and dimensional stability. Combined with a 0° negative rake, the design promotes a stable cutting edge under varying depths of cut, which contributes to a more uniform surface finish and predictable removal rates. Repeatable setup and versatile application in steel turning Tolerance class M and the standard size coding (plate-size 11, thickness code 04) enable repeatable seating and reliable indexable-system compatibility. The designation DNMG110412-RP5 WPP10G matches common toolholder families, simplifying tool management and reducing setup time. Backed by the reputation of Walter Tools, this insert is suitable for batch and continuous production where consistent component quality and reduced downtime are priorities. For precise application advice or to source Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and request the DNMG110412-RP5 WPP10G for optimised steel turning. Technical Data SKU: DNMG110412-RP5-WPP10G-WALTER Article designation: DNMG110412-RP5 ISO designation: DNMG110412-RP5 WPP10G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: RP5 Core specifications Corner radius: 1.2 mm Shape: Rhombus 55° Clearance angle: 0° (negative) Plate size: 11 Thickness code: 04 Tolerance class: M Material group: P (steel) Applications & features Coated carbide grade (Tiger‑tec Gold technology) Optimised for steel machining (ISO group P) RP5 chipbreaker for improved chip formation Stable cutting edge for medium to heavy turning Compatible with common DNMG toolholders FAQ Which materials can this insert machine effectively? The insert is designed primarily for steel (ISO group P); the WPP10G grade and Tiger‑tec Gold technology are optimised for the thermal and chip-formation behaviour of unalloyed and alloyed steels. What chipbreaker does the insert use and what benefit does it deliver? This variant uses the RP5 chipbreaker, which provides controlled chip formation and reduced risk of chip-related interruptions during continuous turning. What geometry and edge strength can be expected from the insert? The rhombic 55° geometry combined with a 1.2 mm nose radius delivers a balance of edge strength and surface finish, suitable for a wide range of turning tasks. Is the insert compatible with standard DNMG toolholders? Yes — the DNMG110412-RP5 designation corresponds to common indexable insert standards and is compatible with standard DNMG toolholder systems. What does tolerance class M mean for production use? Tolerance class M indicates standard machining tolerances for reliable seating and repeatable positioning, supporting consistent production runs and predictable results. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original factory-new merchandise of the manufacturer.
DNMG110412-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the high wear resistance and reliable chip control of this Tiger·tec Gold grade, combined with a robust rhombic 55° geometry for consistent turning of steel components; order directly via Metav Werkzeuge or contact our consultants for application guidance. DNMG110412-RP5 WPP20G rhombic 55° turning insert for steel — Walter Tools The DNMG110412-RP5 WPP20G is a rhombic 55° indexable turning insert engineered for steel machining, featuring a Tiger·tec Gold coated carbide grade and an RP5 chipbreaker for stable cutting. Tiger·tec Gold coating for long tool life Designed for steel machining (ISO group P) RP5 chipbreaker for reliable chip control 1.2 mm corner radius, rhombic 55° geometry Higher output through a wear-resistant coating The Tiger·tec Gold WPP20G grade combines a modern coated carbide structure with optimised microgeometry to extend edge life under demanding conditions. This results in fewer insert changes and longer uninterrupted runs on production lathes, which directly improves machine uptime and lowers tooling costs per part. The coating is tuned for the heat and chip characteristics typical of steel machining, so the grade provides predictable wear and helps maintain dimensional consistency across batches. Precise chip control and consistent surface quality Equipped with an RP5 chipbreaker and a rhombic 55° form, the insert ensures controlled chip formation and evacuation during both medium and finishing passes. The combination of chip geometry and a 1.2 mm corner radius reduces vibration and produces stable cutting forces, delivering improved surface finish and repeatability. For operators unfamiliar with chipbreaker types: RP5 is designed for segmented chips and stable evacuation, reducing the risk of re-cutting and tool interference. Robust geometry suited to general turning operations The negative rake angle of 0° (negative) provides a robust cutting edge that tolerates interrupted cuts and variable feed rates often encountered in shop-floor turning. The rhombic 55° configuration offers versatile approach angles for external turning and profile work, allowing the same insert to be used across several turning tasks without frequent tool changes. This flexibility supports shorter set-up times and simpler tool management in mixed-production environments. Seamless integration and application benefits Classified for ISO group P (steel), the insert integrates with standard DNMG toolholders and is suitable for a wide range of unalloyed and alloyed steels. The M tolerance class and the established Tiger·tec Gold series promise repeatable mounting and consistent cutting geometry, which simplifies process parameter transfer between machines. In short runs and volume production alike, the combination of grade, chipbreaker and geometry delivers a balance of productivity and surface integrity for commercial turning operations. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools DNMG inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DNMG110412-RP5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMG110412-RP5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core specifications Insert designation: DNMG110412-RP5 WPP20G Grade / series: WPP20G / Tiger·tec Gold Corner radius: 1.2 mm Plate size: 11 Thickness: 04 Clearance / rake: 0° (negative) Geometry: Rhombus 55° Chipbreaker: RP5 Tolerance class: M Special features and applications Coating: Tiger·tec Gold coated carbide Execution: G Material group suitability: P (steel) Designed for stable chip formation and extended tool life Optimised for general-purpose turning of steel FAQ What materials is this insert suitable for? The DNMG110412-RP5 WPP20G is specified for ISO group P and is suitable for the machining of unalloyed and alloyed steel grades. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this insert promotes segmented chip formation and reliable evacuation, improving surface finish and reducing the risk of chip entanglement during turning. Can this insert be used for interrupted cuts? Yes. The negative 0° rake and robust geometry make the insert tolerant of interrupted cuts and varying engagement conditions. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and thermal stability, extending tool life and supporting consistent dimensional performance in steel turning. Is the DNMG110412-RP5 compatible with standard toolholders? The insert follows the DNMG format and is compatible with corresponding standard DNMG toolholders for external turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is part of the global precision tooling sector and is recognised for high-quality cutting solutions. Protected trademarks and product names belong to their respective owners. The mention of brand names serves explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the manufacturer.
DNMG110412-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the RP5 chipbreaker for reliable chip control and a stable rhombic 55° geometry with 1.2 mm corner radius to keep production running smoothly; order the DNMG110412-RP5 WPP30G directly via Metav Werkzeuge or consult our specialists for process recommendations. DNMG110412-RP5 WPP30G indexable turning insert — Tiger·tec Gold coating, RP5 chipbreaker (Walter Tools) The DNMG110412-RP5 WPP30G is an indexable turning insert engineered for steel machining, combining a Tiger·tec Gold coated substrate with a robust RP5 chipbreaker for consistent performance in turning operations. Tiger·tec Gold wear resistance RP5 chipbreaker for predictable chips Rhombic 55° form with 1.2 mm radius 0° clearance angle for stable cutting Productivity through engineered stability The combination of a coated carbide substrate and the Tiger·tec Gold technology delivers consistent edge life and predictable wear progression, which reduces process variation in serial production. The insert’s rhombic 55° geometry and 1.2 mm corner radius provide a compromise between strength and form accuracy, making the component suitable for turning operations where reliable dimensional control and repeatability are required. The result is fewer tool changes and steadier cycle times on the shop floor. Predictable chip control for uninterrupted production The RP5 chipbreaker is designed for stable chip formation when machining steels (ISO group P). Its active geometry controls chip shape across common feeds and depths of cut, reducing the risk of snarling or long continuous chips. Improved chip control means enhanced tool life, fewer interruptions for chip clearing and a safer, cleaner machining environment — all contributing to measurable gains in throughput and operator confidence. Coating and substrate explained for process planners The grade WPP30G denotes a coated carbide grade in the Tiger·tec Gold family, optimised for machining steels. Coating technology improves thermal and mechanical resistance at the cutting edge, while the substrate provides the requisite toughness to withstand interrupted cuts and moderate feed rates. For planners unfamiliar with coating terms: the coating reduces abrasive wear and edge microchipping, while the substrate ensures the insert remains stable under load — a combination that supports longer tool life and lower overall tooling cost per part. Practical application and selection guidance This insert is suitable wherever steels are the primary workpiece material and reliability is a priority. Its 0° clearance angle (negative) increases edge support, which is advantageous in robust turning operations and when cutting parameters produce higher forces. When pairing the insert with toolholders, select holders compatible with DNMG geometry and ensure clamping provides uniform seat contact to maintain repeatable results. For mixed-material shops, consider specialised grades for stainless or non-ferrous alloys; for steel-focused lines, the WPP30G grade is a productive choice. For tailored machining advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the DNMG110412-RP5 WPP30G and optimise tool selection for steel applications. Technical data Article number: DNMG110412-RP5-WPP30G-WALTER SKU: DNMG110412-RP5-WPP30G-WALTER Designation: DNMG110412-RP5 Product type: indexable turning insert Series: Tiger·tec Gold Core specifications Insert shape: Rhombus 55° Insert size: 11 Corner radius: 1.2 mm Clearance angle: 0° (negative) Chipbreaker: RP5 Thickness: 04 Tolerance class: M Materials & special features Grade: WPP30G Coating technology: Tiger·tec Gold Substrate: coated carbide Application group: Steel (ISO P) Designed for stable chip control and wear resistance FAQ What materials is this insert suitable for? The DNMG110412-RP5 WPP30G is specified for machining steels (ISO P); the WPP30G grade and Tiger·tec Gold coating are optimised for the heat and chip formation typical of steel turning. How does the RP5 chipbreaker affect cutting performance? The RP5 chipbreaker promotes predictable chip shapes and controlled evacuation during turning operations, which helps maintain consistent tool life and reduces machine downtime for chip clearing. Why choose a 0° negative clearance angle? A 0° (negative) clearance angle increases edge support and stability under load; this improves durability in tougher turning conditions and when interrupted cutting is expected. Can this insert be used with standard DNMG toolholders? Yes, the DNMG110412-RP5 WPP30G fits standard DNMG-compatible turning toolholders when properly clamped and seated, ensuring repeatable cutting geometry. Is the WPP30G grade suitable for high-speed applications? WPP30G is a coated carbide grade optimised for steel machining and provides a balance of wear resistance and toughness; suitability for high-speed cutting depends on the specific machine, setup and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for identification and explanation only and do not imply any affiliation with Metav Werkzeuge. The offered item is an original, factory-new product of the stated manufacturer.
DNMG150404-FM5 WMP20G WMP20G Wendeplatten - Walter Tools
High-performance coated grade and a purpose-built chipbreaker deliver reliable edge stability and consistent chip control for rostfreier Stahl turning; pair the insert’s Rhombus 55° geometry and 0.4 mm corner radius for versatile medium to heavy-duty applications. Order inserts via Metav Werkzeuge or consult our specialists for tailored cutting data. DNMG150404-FM5 WMP20G – Turning indexable insert, Tiger‑tec Gold, Walter Tools A DNMG150404-FM5 WMP20G turning insert engineered for rostfreier Stahl turning and medium to heavy-duty operations *High-performance Tiger‑tec Gold coating *FM5 chipbreaker for secure chip control *Rhombus 55° geometry for versatile turning *Designed for rostfreier Stahl machining Reliable edge life tailored to rostfreier Stahl machining The combination of the WMP20G grade and Tiger‑tec Gold coating provides a balance of wear resistance and thermal stability that specifically addresses the challenges of rostfreier Stahl. The coated carbide composition is formulated to reduce adhesion and build‑up on the cutting edge under elevated temperatures; this leads to more consistent tool life and fewer interruptions for edge dressing. The insert’s geometry and the FM5 chipbreaker work together to promote controlled chip formation, which reduces the risk of workpiece damage and simplifies chip evacuation in continuous turning operations. Process stability and machining performance Rhombus 55° geometry and a 0° negative rake enable predictable engagement and favourable force distribution during turning cycles. The 0.4 mm corner radius supports robust edge strength for medium cuts while maintaining acceptable surface finish; the insert thickness provides stable clamping and repeatable positioning in standard toolholders. These measurable characteristics contribute to improved machining uptime and a lower scrap rate when processing difficult-to-cut rostfreier Stahl grades, making this insert suitable for batch production and demanding single‑piece machining alike. Practical advantages for workshop use Indexability and standard sizing make the insert straightforward to integrate into existing tool systems, while the FM5 chipbreaker simplifies setup by delivering consistent chip shapes across varying feeds. The insert’s specification reduces the need for frequent process adjustments, offering time savings during tool changes and setup verification. For shops seeking process reliability, the combination of coating, chip control and geometry yields tangible production benefits: reduced tool consumption, steadier cycle times and improved surface quality without complex process tuning. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Gold inserts and specific stocking information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG150404-FM5-WMP20G-WALTER Article designation: DNMG150404-FM5 WMP20G Product type: Turning indexable insert Brand: Walter Tools Facts Insert size (inscribed circle): 15 mm Thickness: 4.0 mm Corner radius: 0.4 mm Rake angle: 0° negative Geometry: Rhombus 55° Tolerance class: M Special features Coating/Grade: Tiger‑tec Gold / WMP20G Chipbreaker: FM5 Coated carbide substrate Suitable for rostfreier Stahl machining Designed for medium to robust cutting conditions FAQ Which materials is this insert suitable for? The DNMG150404-FM5 WMP20G insert is designed principally for rostfreier Stahl; the WMP20G grade and Tiger‑tec Gold coating support secure chip formation when machining tough, heat‑prone stainless alloys. What benefit does the FM5 chipbreaker provide? The FM5 chipbreaker promotes controlled, short chips and reliable evacuation, reducing the risk of entangling chips and helping to maintain a consistent surface finish with fewer interruptions. How does the Rhombus 55° geometry affect machining? Rhombus 55° geometry offers a versatile cutting angle that balances accessibility and edge strength, permitting a range of turning operations from finishing to medium roughing without changing the basic tool setup. Is the insert suitable for repeatable production runs? Yes; the combination of coated grade, chip control and stable geometry supports repeatable performance and reduced variation across production batches. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-FM5 WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and a robust FM5 chipbreaker for consistent performance when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our technical team for process alignment. DNMG150404‑FM5 WMP20S — Indexable turning insert, Tiger‑tec Silver for rostfreier Stahl (Walter Tools) A compact DNMG150404‑FM5 WMP20S indexable insert engineered for medium to heavy turning of rostfreier Stahl, combining a rhombic 55° geometry with a 0.4 mm corner radius for secure cutting edge support Tiger‑tec Silver coating for extended life Optimised for rostfreier Stahl machining Rhombic 55° form with 0.4 mm corner radius FM5 chipbreaker for stable chip control Increased uptime through stable cutting edges The combination of the WMP20S coated carbide grade and the Tiger‑tec Silver technology focuses on edge stability and repeatable performance. In practice this means longer intervals between index changes and fewer process interruptions, which raises overall equipment effectiveness. The coated composition resists the adhesion tendencies typical of rostfreier Stahl under elevated temperatures, thereby reducing built‑up edge and preserving the effective cutting geometry over extended runs. This supports predictable tool life and helps maintain consistent component quality. Consistent chip control for secure turning operations The integrated FM5 chipbreaker is designed to produce short, controllable chips when turning stainless alloys, enhancing operator safety and machine cleanliness. Improved chip control reduces the frequency of manual chip clearing and lowers the risk of surface damage from recirculating swarf. In automated or lights‑out machining environments, the stable chip form contributes directly to process security and fewer unscheduled interventions, increasing throughput and reducing scrap rates. Geometry tailored to versatile turning tasks The Rhombic 55° insert shape with a 0.4 mm corner radius provides a balance between edge strength and accessibility for both external and light profiling cuts. The 0° negative clearance improves edge support for interrupted cuts and robust operations, allowing reliable engagement in tougher rostfreier Stahl batches. The insert size and thickness are suitable for a wide range of commonly used turning toolholders, enabling flexible integration into existing tool‑setups without compromising rigidity or finish quality. Seamless integration into production flows Designed by a recognised tooling brand, this coated insert supports repeatable surface quality and process stability that are important for batch production and component traceability. The grade’s focus on rostfreier Stahl machining minimises typical stainless steel challenges such as springy chips and rapid edge wear, so cycle times can be maintained without sacrificing finish. For shops seeking to standardise on a single solution for medium to robust turning conditions, the combination of coating, geometry and chip control simplifies tool management and inventory planning. For reliable rostfreier Stahl turning with Walter Tools’ Tiger‑tec Silver technology, contact Metav Werkzeuge for tailored recommendations and ordering via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data SKU: DNMG150404‑FM5‑WMP20S‑WALTER Designation: DNMG150404‑FM5 WMP20S Product type: Indexable turning insert Brand: Walter Tools Core data Insert form: Rhombic 55° Corner radius: 0.4 mm Clearance / rake: 0° (negative) Size designation: 15 Thickness designation: 04 Chipbreaker: FM5 Grade / series: WMP20S, Tiger‑tec Silver Material class: M (rostfreier Stahl applications) Special features Coated carbide grade optimised for rostfreier Stahl Stable edge behaviour for medium to robust conditions Designed for reliable chip formation and process security Suitable for external turning and light profiling FAQ What materials is this insert best suited for? This insert is optimised for machining rostfreier Stahl; the WMP20S grade and Tiger‑tec Silver coating support secure chip formation and edge life on stainless alloys. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker generates short, controllable chips that improve process security and reduce the risk of surface damage from swarf during turning. Can the insert be used for interrupted cuts? Yes, the 0° negative clearance and 0.4 mm corner radius provide enhanced edge support suitable for interrupted and more robust cutting conditions. Which toolholders are compatible with this geometry? The rhombic 55° form and DNMG ISO designation match standard turning toolholders designed for DNMG inserts; this enables straightforward integration into common tool setups. Does the grade support automated or lights‑out machining? The combination of Tiger‑tec Silver coating and FM5 chip control favours stable, repeatable performance, making the insert a sound choice for automated production with minimal supervision. The Walter AG (marketed as Walter Tools) is recognised as a leading provider of precision tools in metalworking and forms part of the global tooling community. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only; the offered article is an original, factory‑new product of the manufacturer.
DNMG150404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of the WSM10S cutting grade and the Tiger·tec Silver coating for reliable machining of stainless steel and heat-resistant superalloys; the rhombic geometry and robust corner radius ensure stable edge life and predictable chip formation, supporting uninterrupted production. Order the DNMG150404-FM5 WSM10S directly via Metav Werkzeuge or ask the consultants for application support. DNMG150404-FM5 WSM10S – Indexable turning insert, Tiger·tec Silver, 0° negative rake (Walter Tools) The DNMG150404-FM5 WSM10S is an indexable turning insert with a rhombic 55° geometry, designed for demanding turning of stainless steel and heat‑resistant superalloys. Tiger·tec Silver coated carbide grade WSM10S Optimised for stainless steel and superalloys Rhombic 55° geometry for versatile turning 0.4 mm corner radius for robust edge life High‑performance grade for tough materials and consistent productivity The combination of the Tiger·tec Silver coating and the WSM10S grade yields a coated carbide with emphasis on thermal resistance and wear control. This translates into improved process stability when facing materials that tend to workharden or generate high cutting temperatures. Built for hard‑to‑cut alloys, the insert supports predictable tool life and reduced scrap rates, helping to lower overall machining costs while maintaining component quality. Geometry and edge strength that reduce downtime The rhombic 55° shape and 0° negative rake geometry deliver a robust cutting edge suited to interrupted cuts and heavier engagement. With a 0.4 mm corner radius and the FM5 chipbreaker, the insert encourages stable chip formation and stronger edge retention. In practice, this means fewer insert changes, less machine downtime and consistent surface finish during serial production—advantages that improve throughput and operational efficiency. Application flexibility and tool‑holder compatibility Intended for turning operations on stainless steel and S‑group alloys, the grade offers versatility across typical workshop set‑ups; the geometry fits common toolholders and can be integrated into existing tool systems without modification. The FM5 chipbreaking design balances chip control and cutting force, making the insert suitable for both roughing passes and light finishing, depending on cutting data. For specific feed and speed recommendations, technical advice is available to match the grade to the machine and material. Contact Metav Werkzeuge for tailored application recommendations and availability of Walter Tools Tiger·tec Silver inserts like the DNMG150404-FM5 WSM10S Technical data Article number: DNMG150404-FM5-WSM10S-WALTER Designation: DNMG150404-FM5 Full designation: DNMG150404-FM5 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Chipbreaker: FM5 Core data Plate size: 15 Thickness: 04 Corner radius: 0.4 mm Shape: Rhombus 55° Rake angle: 0° (negative) Tolerance class: M Execution: G Material groups: S / M Special features Coating: Tiger·tec Silver Carbide type: coated carbide Suitable for: stainless steel and heat‑resistant superalloys Geometry: negative for enhanced edge strength Chip control: FM5 chipbreaker for controlled chips FAQ What materials is this insert suitable for? The DNMG150404-FM5 WSM10S is specified for machining stainless steel and S‑group superalloys, offering thermal resistance and stable chip formation in these materials. Which geometry advantages does the rhombic 55° provide? Rhombic 55° geometry offers versatility for various turning applications; the shape provides good access to profiles and consistent cutting engagement with standard toolholders. How does the FM5 chipbreaker affect production? The FM5 chipbreaker promotes controlled chip flow and helps to avoid long, tangled chips; this contributes to safer mounting conditions and reduced interruptions in automated cycles. Is the insert compatible with standard toolholders? Yes, the insert’s ISO designation and rhombic form make it compatible with common turning toolholders designed for DNMG‑type inserts. Can the DNMG150404-FM5 WSM10S be used for finishing as well as roughing? Depending on cutting data and workpiece material, the insert’s combination of coating, grade and chipbreaker allows application both in heavier passes and in light finishing cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation and identification. There is no affiliation between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer.
DNMG150404-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Maximise process control and tool life with the combination of the Tiger·tec Silver coating and the proven FM5 chipbreaker; the rhombic geometry and 0.4 mm corner radius deliver consistent surface quality and stable cutting for stainless steel and high-temperature alloys—order the DNMG150404-FM5 WSM20S through Metav Werkzeuge or consult their specialists for application-specific recommendations DNMG150404-FM5 WSM20S – Indexable turning insert, Tiger·tec Silver, Walter Tools The DNMG150404-FM5 WSM20S is a rhombic 55° indexable insert designed for demanding turning operations on stainless steel and superalloys, offering robust edge stability and reliable chip control Tiger·tec Silver coating Optimised for stainless steel (M) FM5 chipbreaker for reliable chips Rhombic 55° form, 0.4 mm corner radius Reliable grade and coating for tougher materials The insert combines the WSM20S grade within the Tiger·tec Silver family to address demanding machining tasks. The coated carbide construction supports elevated temperatures and assists secure chip formation when cutting stainless steel and alloys in group S. As a result, the cutting edge remains stable under thermal load, which reduces unexpected flank wear and contributes to longer intervals between indexings. This behaviour translates directly into improved cycle-time predictability and fewer unplanned tool changes, supporting a more efficient production flow. Geometry that stabilises cutting and improves surface finish The Rhombic 55° geometry together with a 0.4 mm corner radius and a negative 0° relief angle creates a cutting geometry that balances edge strength with achievable surface quality. The moderate corner radius absorbs radial loads and helps prevent notch wear when machining work-hardened surfaces, while the rhombic form provides multiple cutting edges for cost-effective indexing. The integrated FM5 chipbreaker is tuned to produce manageable chip shapes on sticky materials, reducing the risk of built-up edge and enhancing process reliability during semi-finish and finishing passes. Process benefits, tool life and practical handling This insert supports a consistent and economical machining strategy: the grade’s thermal resistance and the chip control help to extend tool life and maintain dimensional consistency across batches. Compatibility with standard DNMG toolholders allows seamless integration into existing turning setups. The combination of process security and repeatable edge performance makes the insert well suited to manufacturers who require stable output from stainless steel and high-temperature alloy components. For advice on feeds, speeds and clamping, the technical team at Metav Werkzeuge can provide practical recommendations tailored to specific machines and operations. For machining stainless steel and superalloys with high reproducibility, request application guidance from Metav Werkzeuge or order the Walter Tools DNMG150404-FM5 WSM20S through Metav Werkzeuge today Technical data Article number: DNMG150404-FM5-WSM20S-WALTER Designation: DNMG150404-FM5 WSM20S Type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Inscribed circle: 15 Corner radius: 0.4 mm Relief angle: 0° (negative) Thickness code: 04 Tolerance class: M Special features Grade: WSM20S Series: Tiger·tec Silver Chipbreaker: FM5 Suitable for: stainless steel (M), superalloys/titanium (S) Execution: G Plate form: Rhombus 55° Plate size: 15 Plate thickness: 04 FAQ Is this insert suitable for stainless steel? Yes. The WSM20S grade in the DNMG150404-FM5 WSM20S is specifically developed for stainless steel (ISO group M) and offers thermal stability and controlled chip formation on these materials. What does the WSM20S designation indicate? WSM20S denotes the Walter Tools cutting grade within the Tiger·tec Silver series; it identifies a coated carbide formulation optimised for tough-to-machine materials and improved edge life. How does the FM5 chipbreaker affect performance? The FM5 chipbreaker on the insert promotes consistent, controllable chips during turning, reducing the likelihood of built-up edge and supporting uninterrupted operation when machining sticky or strain-hardened materials. What geometry is signified by the DNMG150404 code? The DNMG150404 portion of the designation corresponds to the insert geometry and dimensions used by Walter Tools: rhombic 55° form, size 15, thickness code 04 and a corner radius of 0.4 mm, which together determine mounting and cutting behaviour. Can this insert be used on superalloys and titanium? Yes. The material suitability includes superalloys and titanium (ISO group S), where the grade’s heat resistance and edge stability help manage difficult thermal and mechanical loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Combining the WEP10C cermet grade with the FP5 chipbreaker yields a turning insert that prioritises consistent surface finish and predictable chip formation for efficient production. Order directly via Metav Werkzeuge or consult their specialists for integration into existing toolholders. DNMG150404-FP5 WEP10C — Turning indexable insert with FP5 chipbreaker (Walter Tools) A DNMG150404-FP5 WEP10C turning insert engineered for stable finishing cuts and precise chip control in general turning operations Cermet grade WEP10C for fine finishing FP5 chipbreaker for controlled chip formation 0° negative rake for stable cutting performance Precise finishing through cermet technology The DNMG150404-FP5 WEP10C insert uses a Cermet cutting material to achieve fine finishing and improved surface integrity in finishing applications. Cermet grades combine ceramic hardness with metallic toughness, which reduces edge wear and helps maintain a consistent cutting edge over longer tool life. This characteristic makes the insert well suited where dimensional stability and repeatable surface quality are priorities. The robust edge behaviour of the grade supports shorter rework cycles and fewer in-process adjustments, contributing to reliable output on batch and serial production. Stable process and predictable chip control The FP5 chipbreaker has been designed to produce compact, manageable chips under common turning parameters, improving productivity by reducing downtime caused by chip entanglement. Combined with the 0° negative rake, the geometry delivers a conservative cutting action that increases process stability and resistance to shock loads when compared with more positive rake alternatives. The result is a calmer machining environment, less vibration and more reproducible cutting forces—advantages that translate directly into better drilling and finishing consistency across components. Geometry that ensures compatibility and repeatability The insert’s Rhombus 55° format and corner radius 0.4 mm give a balance between edge strength and finishing capability. The standard DNMG geometry ensures compatibility with common toolholder systems, while the compact 15 mm inscribed circle and 4.0 mm thickness provide predictable rigidity for finishing passes. These geometric choices help maintain repeatable contact conditions at the cutting edge and allow set-up procedures already established in the shop to be retained without modification, simplifying integration into existing tooling setups. Contact Metav Werkzeuge for tailored application advice on Walter Tools DNMG150404-FP5 WEP10C or to request technical data: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: DNMG150404-FP5-WEP10C-WALTER Designation: DNMG150404-FP5 WEP10C Type: Turning indexable insert Series: Walter Cermet Grade: WEP10C Chipbreaker: FP5 Manufacturer: Walter Tools Dimensions and core data Inscribed circle / size: 15 mm Thickness: 4.0 mm Corner radius: 0.4 mm Relief / clearance angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Material & special features Cutting material: Cermet (catalogue-dependent) Execution: G ISO designation: DNMG150404-FP5 WEP10C Base designation without grade: DNMG150404-FP5 Series description: Walter Cermet FAQ What machining tasks is this cermet grade optimised for? The WEP10C cermet grade is optimised for finishing and fine-turning operations where a high-quality surface finish and dimensional stability are required; the DNMG150404-FP5 WEP10C insert by Walter Tools focuses on those outcomes. How does the FP5 chipbreaker affect chip formation? The FP5 chipbreaker is designed to produce compact chips and controlled chip flow, improving machine uptime and simplifying chip handling when machining with the DNMG150404-FP5 WEP10C insert. What does a 0° negative rake mean for cutting performance? A 0° negative rake gives a more robust cutting edge and reduced sensitivity to shock loads; for the DNMG150404-FP5 WEP10C turning insert this contributes to greater process stability and consistent cutting forces. Which toolholders are compatible with the Rhombus 55° DNMG geometry? Rhombus 55° inserts in DNMG format are compatible with standard holders designed for DNMG inserts; the DNMG150404-FP5 WEP10C conforms to those established interfaces for easy insertion and accurate indexing. How should the corner radius 0.4 mm be used in practice? A corner radius 0.4 mm offers a compromise between edge strength and surface finish; it is suitable for light to medium finishing passes where a smooth surface and acceptable tool life are required. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150404-FP5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, a robust FP5 chipbreaker and a rhombic 55° form for consistent productivity; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. DNMG150404-FP5 WKP01G Turning indexable insert, Tiger‑tec Gold coating, FP5 chipbreaker – Walter Tools The DNMG150404-FP5 WKP01G is a compact rhombic 55° turning insert engineered for reliable machining of steel and cast iron in general turning applications Tiger‑tec Gold coating for stable cutting edge Optimised FP5 chipbreaker for steel and cast iron Rhombic 55° form with 0.4 mm corner radius High-performance machining for steel and cast iron The Tiger‑tec Gold grade delivers a balance between wear resistance and toughness that is particularly effective when machining steel (ISO P) and cast iron (ISO K). The coated carbide microstructure reduces flank and crater wear, resulting in longer intervals between tool changes and fewer interruptions on the shop floor. For production-oriented turning, this grade supports higher cutting speeds and steadier metal removal, translating into measurable efficiency gains and lower unit costs per component. Coating and insert grade that extend tool life The combination of Tiger‑tec Gold technology and a coated carbide substrate offers improved resistance to abrasive and adhesive wear. The coating’s finish reduces built-up edge formation and maintains a stable cutting edge, so insert life is extended without sacrificing surface quality. The economic benefit is clear: fewer insert replacements and more consistent batch quality, which supports reliable process planning in both jobbing and series production environments. Geometry and chip control for consistent surface quality The FP5 chipbreaker is designed to produce short, controlled chips for both steel and cast iron, improving chip evacuation and reducing the risk of re-cutting. The insert’s rhombic 55° form provides versatile cutting angles that suit a wide range of turning tasks, while the 0° negative rake increases edge strength for interrupted cuts. A 0.4 mm corner radius contributes to a good surface finish and dimensional control, and the designated 15 mm plate size with 4 mm thickness ensures compatibility with standard DNMG holders. Contact Metav Werkzeuge for application-specific recommendations and availability of Walter Tools inserts; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: DNMG150404-FP5-WKP01G-WALTER Label: Drehwendeschneidplatte DNMG150404-FP5 WKP01G Walter Tools Manufacturer: Walter Tools Facts Inscribed circle: 15 mm Plate thickness: 4 mm Corner radius: 0.4 mm Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP01G (coated carbide) Chipbreaker: FP5 Form: Rhombic 55° Material suitability: Steel (ISO P), Cast iron (ISO K) Execution: G FAQ Which materials is this insert designed for? The DNMG150404-FP5 WKP01G insert from Walter Tools is intended for steel (ISO P) and cast iron (ISO K) machining, matching the WKP01G grade’s development focus. What advantages does the Tiger‑tec Gold grade provide? Tiger‑tec Gold on this insert improves wear resistance and edge stability, so the Walter Tools grade delivers longer tool life and more consistent cutting performance under production conditions. How does the FP5 chipbreaker affect chip control and finish? The FP5 chipbreaker produces short, controlled chips that aid evacuation and help maintain a consistent surface finish during turning operations with the DNMG150404-FP5 WKP01G. What geometry features influence robustness and surface quality? The rhombic 55° form combined with a 0° negative rake increases edge strength for interrupted cuts, while the 0.4 mm corner radius supports good surface finish and dimensional stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold wear resistance and the FP5 chipbreaker delivers longer tool life and reliable chip control for Stahl turning; the robust Rhombus 55° geometry ensures stable results across a range of steels. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG150404-FP5 WPP10G turning indexable insert for Stahl (Tiger‑tec Gold) — Walter Tools The DNMG150404-FP5 WPP10G is a coated carbide turning insert designed for robust, repeatable machining of Stahl with a focus on wear resistance and consistent chip formation. Tiger‑tec Gold coating for long tool life FP5 chipbreaker for reliable chip control Rhombic 55° form for versatile turning Designed for Stahl (ISO P) machining Higher productivity thanks to the wear‑resistant grade The coated carbide WPP10G grade, part of the Tiger‑tec Gold series, is formulated to improve wear resistance under the thermal and mechanical loads typical of Stahl turning. That enhanced wear behaviour means fewer insert changes and higher uptime on the lathe, which translates directly into improved productivity. The coating also supports stable cutting-edge life, enabling predictable tool cycles and consistent component quality, so production planning becomes more reliable. Geometry for process stability and surface quality The Rhombus 55° plate form combined with a 0° (negative) rake and a 0.4 mm corner radius provides a robust cutting edge suited to general and finishing operations alike. The negative rake increases edge strength where interrupted cuts or harder alloyed steels are encountered, while the moderate corner radius balances edge life and surface finish. The tolerance class M supports repeatable clamping and positional accuracy, reducing set-up variability and ensuring consistent surface results across production batches. Practical benefits on the shop floor and material scope Equipped with the FP5 chipbreaker, the insert offers controlled chip formation that reduces entanglement and improves swarf handling at a range of cutting parameters. Compatibility with Stahl (ISO P) makes this insert suitable for unalloyed and alloyed steels encountered in general engineering and component manufacturing. The combination of stable chip control and a wear‑resistant grade reduces unplanned downtime and contributes to lower unit costs over a production run, making the solution economically attractive for both small series and serial production. Contact Metav Werkzeuge for tailored recommendations and availability of Walter Tools inserts such as the DNMG150404-FP5 WPP10G Technical data SKU: DNMG150404-FP5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150404-FP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Turning indexable insert Facts Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: FP5 Plate form: Rhombus 55° Material suitability: Stahl (ISO P) Coated carbide FAQ What materials is this insert suitable for? The DNMG150404-FP5 WPP10G insert is designed for machining Stahl (ISO P), covering unalloyed and alloyed steels. How does the FP5 chipbreaker affect chip control? The FP5 chipbreaker on the DNMG150404-FP5 WPP10G promotes reliable chip formation and evacuation, helping to avoid chip entanglement and improving process safety. Is this insert appropriate for interrupted cuts? Yes, the 0° negative rake and the robust geometry of the turning indexable insert provide the edge strength required for interrupted cuts and tougher turning operations. What benefits does the Tiger‑tec Gold series provide? Tiger‑tec Gold in the WPP10G grade enhances wear resistance and supports longer tool life, resulting in fewer insert changes and more predictable production cycles. Which tolerance class applies to this insert? The insert is supplied in tolerance class M, ensuring consistent fit and positional accuracy in standard toolholders. Walter Tools: Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected brand names and trademarks belong to their respective owners. Brand names are mentioned solely for explanation and comparison. The offered item is original, factory‑new merchandise of the stated manufacturer.
DNMG150404-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of a wear-resistant coating and a stable cutting geometry for efficient steel turning; the Tiger·tec Gold grade and FP5 chipbreaker ensure consistent productivity and long tool life — order via Metav Werkzeuge or consult our specialists for cutting data. DNMG150404-FP5 WPP20G turning insert — Tiger·tec Gold, rhombic 55°, 0° negative — Walter Tools The DNMG150404-FP5 WPP20G is a rhombic 55° turning insert designed for general steel machining, offering the durability of the Tiger·tec Gold coating and reliable chip control for medium to demanding turning operations. Tiger·tec Gold coating for high wear resistance Universal grade optimised for steel (ISO P) Rhombic 55° geometry with 0.4 mm radius FP5 chipbreaker for predictable chip formation Greater productivity through advanced coating and grade The combination of Tiger·tec Gold technology and a coated carbide substrate provides a clear productivity advantage when machining steels. The WPP20G grade is formulated as a universal solution for ISO P materials, balancing wear resistance and toughness to extend tool life under varying conditions. This results in fewer insert changes and reduced machine downtime, which supports a more continuous production flow. The specification suits workshops aiming for both repeatability and longer edge life without complex process adjustments. Secure chip control and improved surface quality The dedicated chipbreaker FP5 offers controlled chip formation during turning of steel, reducing the risk of built-up edge and vibration. Combined with the corner radius 0.4 mm, the geometry promotes a stable cut and consistent surface finish even when feed rates vary slightly. This geometry helps maintain dimensional accuracy on toleranced components while simplifying downstream operations, so finishing steps and measurement routines remain predictable and efficient. Robust geometry for reliable clamping and tough cuts The rhombic 55° insert shape and 0° negative relief deliver a secure cutting edge and good support in the toolholder, making the insert suitable for interrupted cuts and heavier roughing passes. The tolerance class M indicates consistent manufacturing quality, aiding repeatable seating and secure clamping in standard NC toolholders. These characteristics reduce chatter and improve edge stability, which in turn enhances process security and repeatability on production lines. Practical application notes and process alignment This insert is targeted at steel machining tasks where a universal balance of wear resistance and toughness is required. The WPP20G grade is adaptable across a broad range of steel subgroups, allowing shops to standardise on a single insert for multiple operations. For specific cutting data, coolant choice and toolholder recommendations, Metav Werkzeuge can provide tailored advice to match machine capability and batch size. The emphasis on a universal grade helps to simplify tooling inventory while maintaining reliable performance in everyday turning applications. Contact Metav Werkzeuge today for application-specific cutting data and availability of the Tiger·tec Gold WPP20G turning insert by Walter Tools; advice and quotes are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150404-FP5-WPP20G-WALTER Designation: DNMG150404-FP5 Grade: WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Numbers / Core technical data Insert size: 15 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Plate thickness: 4 mm Insert shape: Rhombic 55° Special features / Versions Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FP5 Material application: steel (ISO P) Tolerance class: M Execution: G FAQ What materials is this insert suitable for? The DNMG150404-FP5 WPP20G insert by Walter Tools is designed primarily for steel (ISO P); the WPP20G grade balances wear resistance and toughness for a wide range of steel subgroups. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker delivers controlled chip formation and reduced risk of built-up edge in steel turning, improving surface finish and process stability with the WPP20G grade. Can the insert handle interrupted cuts? Yes, the rhombic 55° geometry with a 0° negative relief offers secure support in the toolholder, making it suitable for interrupted and heavier cutting engagements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coated grade and an optimised FW5 chipbreaker delivers stable cutting and reliable tool life for steel machining; order the DNMG150404-FW5 WPP10G directly via Metav Werkzeuge or consult our advisors for application support. DNMG150404-FW5 WPP10G indexable turning insert — Walter Tools, Tiger·tec Gold, for steel The DNMG150404-FW5 WPP10G is a rhombic 55° indexable turning insert designed for productive steel machining with a Tiger·tec Gold coated carbide grade. Tiger·tec Gold coated carbide grade Optimised FW5 chipbreaker for stable chips Rhombic 55° geometry with 0.4 mm radius Negative rake 0° for secure edge support Improved productivity for steel components The Tiger·tec Gold coating combined with the WPP10G carbide grade provides a balanced hardness and toughness mix that supports continuous operation in steel machining. By using a coated, wear-resistant grade, the insert reduces flank wear and maintains a stable cutting edge under typical steel cutting temperatures. The FW5 chipbreaker is engineered to produce predictable, short chips in a broad range of steels, which lowers the risk of entanglement and improves cycle reliability. This translates into fewer machining interruptions and a steadier production flow on turned parts. Secure cutting edge and dimensional consistency With a rhombic 55° form and 0° negative rake, the insert offers strong edge support and consistent cutting forces, which is especially important for interrupted cuts or hard inclusions in steel. The 0.4 mm corner radius increases robustness at the cutting edge and helps to distribute cutting stresses, reducing the likelihood of edge chipping. These geometric choices support repeatable surface finishes and dimensional accuracy, making the insert suitable for both roughing passes that demand stability and light finishing where surface integrity matters. Practical handling and workpiece integration The plate format and mounting code reflect a standard indexable insert design that simplifies toolholder selection and inventory management. The designation indicates compatible holders and nominal dimensions, easing tool changeover in the workshop. As a coated indexable insert, the component eliminates the need for resharpening on-site and enables quick indexing for four fresh cutting edges. The combination of coating, chip control and geometry is tailored to common steel grades, helping to reduce cycle times while preserving predictable tool life. Contact Metav Werkzeuge today for tailored advice on integrating the Walter Tools DNMG150404-FW5 WPP10G Tiger·tec Gold inserts into production and to request application-specific recommendations Technical data Article number: DNMG150404-FW5-WPP10G-WALTER Designation: DNMG150404-FW5 ISO designation: DNMG150404-FW5 WPP10G Brand: Walter Tools SKU: DNMG150404-FW5-WPP10G-WALTER Facts Plate size: 15 Corner radius: 0.4 Plate thickness: 04 Free angle: 0° (negative) Geometry: Rhombus 55° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FW5 Execution: G Material application: Steel (P) Product type: Indexable turning insert UID: DNMG150404-FW5-WPP10G-WALTER FAQ What materials is this insert suited for? The DNMG150404-FW5 WPP10G insert is designed primarily for steel machining (ISO group P); the WPP10G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation conditions typical of steel cutting. How does the FW5 chipbreaker affect chip control? The FW5 chipbreaker produces controlled, short chips across a wide range of cutting parameters, improving chip evacuation and reducing the risk of chip entanglement during turning operations with this Walter Tools insert. Can the insert handle interrupted cuts or heavy engagement? The rhombic 55° shape, 0° negative rake and 0.4 mm corner radius provide enhanced edge support, making the insert suitable for applications with occasional interruptions or variable engagement while maintaining dimensional stability. Is this insert compatible with standard toolholders? The ISO-style designation DNMG150404-FW5 indicates compatibility with standard holders designed for DNMG 15-format inserts; toolholder selection should match the insert geometry and clamping style. What benefits does the Tiger·tec Gold coating deliver? The Tiger·tec Gold coating combines wear resistance with toughness to extend tool life and stabilise cutting performance in steel applications, helping to reduce downtime and maintain consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer. Walter AG (brand: Walter Tools) is part of the Sandvik Group.
DNMG150404-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Als wirtschaftliche Verbindung von hoher Standzeit und prozesssicherer Zerspanung eignet sich die Kombination aus der beschichteten Schneidstoffsorte und der ausgewogenen Geometrie für durchgängige Produktionsläufe; profitieren von optimierter Spanbildung und stabiler Schneidkante bei der Bearbeitung rostfreier Stähle und hitzebeständiger Legierungen. Für Bestellung oder technische Rückfragen bitte Metav Werkzeuge kontaktieren oder Beratung anfordern. DNMG150404-FW5 WSM20S — Walter Tools turning insert, Tiger‑tec Silver, for stainless steels and superalloys DNMG150404-FW5 WSM20S is a coated turning insert optimised for heavy‑duty turning of stainless steels and heat‑resistant superalloys, combining stable cutting edges with reliable chip control. Tiger‑tec Silver coating technology WSM20S grade for stainless steels and superalloys Rhombus 55° form with 0.4 mm corner radius 0° rake (negative) for cutting edge stability Consistent cutting performance through a specialised grade The WSM20S cutting grade with Tiger‑tec Silver coating is engineered for demanding turning tasks where heat and edge wear are critical factors. The coating reduces friction and improves thermal resistance, which in turn supports stable chip formation and prolongs tool life. This translates into fewer tool changes and a more predictable production rhythm, especially when machining materials that tend to work‑harden or build up on the edge. Such process reliability benefits throughput and reduces unplanned downtime. Geometry that guarantees repeatable surface quality The Rhombus 55° insert shape and the corner radius 0.4 mm deliver a balance between strength and finishing capability. A negative 0° rake promotes a robust cutting edge that resists chipping under interrupted cuts or heavy cross‑section removal. Together with the FW5 chipbreaker, these geometry features produce controlled chips and consistent surface finishes, meaning fewer secondary operations and improved part quality in serial production. Designed for challenging materials: stainless steels and superalloys This insert is specified for the ISO groups S and M — superalloys and stainless steels — which present high thermal loads and poor heat conduction. The WSM20S grade supports secure chip evacuation and minimises the risk of built‑up edge formation, which is essential when machining parts that require tight tolerances and consistent surface integrity. The combination of grade and chipbreaker is particularly suitable for applications where repeatable performance in demanding alloys is required. Productivity and economical operation in everyday turning By combining a wear‑resistant grade with a robust geometry, the insert contributes to longer tool life and steady process windows. The Tiger‑tec Silver technology helps maintain a stable cutting edge, reducing scrap rates and increasing usable tool life per insert. For production environments that prioritise uptime and reproducible part quality, this insert supports both efficiency and cost‑effectiveness through fewer interventions and consistent cycle times. For application advice, availability and to request a technical data sheet for the Walter Tools DNMG150404‑FW5 WSM20S insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. Technical Data SKU: DNMG150404-FW5-WSM20S-WALTER Label: Drehwendeschneidplatte DNMG150404-FW5 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Core specifications Insert form: Rhombus 55° Insert size (inscribed circle): 15 mm Thickness: 4 mm Corner radius: 0.4 mm Rake angle: 0° (negative) Chipbreaker: FW5 Tolerance class: M Materials & features Coating: Tiger·tec Silver Material suitability: S / M (superalloys, stainless steels) Application focus: turning of heat‑resistant alloys and stainless steels Designation: DNMG150404-FW5 WSM20S Execution: G FAQ Is this insert suitable for machining austenitic stainless steels? Yes. The DNMG150404‑FW5 WSM20S insert is specified for ISO group M and is designed to handle the thermal and mechanical challenges of austenitic stainless steels. Which materials in group S can be machined with this grade? The WSM20S grade is suitable for many superalloys and heat‑resistant materials that require thermal stability and strong edge resistance during turning. What advantage does the Tiger‑tec Silver coating bring? Tiger‑tec Silver on the DNMG150404‑FW5 WSM20S insert reduces friction and improves heat resistance, supporting stable cutting edges and extended tool life under demanding conditions. How does the FW5 chipbreaker affect chip control? The FW5 chipbreaker combined with the insert geometry promotes controlled chip formation and evacuation, which helps maintain consistent surface finish and reduces secondary operations. Can this insert be used for roughing and finishing operations? Yes. The robust geometry and moderate corner radius allow for productive roughing while still delivering acceptable finishes, enabling flexible use across operation types with the same insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original factory‑new product of the manufacturer Walter Tools.
DNMG150404-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from a robust cutting solution that combines Tiger·tec Gold coating and an optimised MM5 chipbreaker to secure stable chip formation and extended edge life when machining stainless steel; order directly via Metav Werkzeuge or contact our consultants for process advice. DNMG150404-MM5 WMP20G turning insert — rhombic 55°, MM5 chipbreaker (Walter Tools) The DNMG150404-MM5 WMP20G is a rhombic 55° turning insert with Tiger·tec Gold coating, engineered for reliable, productive machining of stainless steel under medium to robust conditions. Tiger·tec Gold coated carbide Optimised chip control MM5 Rhombic 55° geometry, r0.4 For stainless steels (ISO M) Consistent performance for stainless steel turning The WMP20G grade, part of the Tiger·tec Gold series, is a coated carbide solution tailored to the specific demands of stainless steel machining. Its composition and coating support secure chip formation and resist thermal softening, which reduces the tendency for built-up edge and enables longer tool life. In production terms, this translates into fewer tool changes, steadier dimensional results and improved process reliability when turning austenitic and other stainless grades. Geometry and edge integrity for demanding operations The rhombic 55° shape combined with a 0° negative rake delivers a mechanically robust cutting edge that withstands heavy engagement and intermittent cutting. The small r0.4 corner radius provides a balance between strength and surface finish, while the MM5 chipbreaker promotes short, controllable chips in subcritical cutting conditions. Together these characteristics ensure stable cutting forces and predictable surface quality in both continuous and interrupted turning tasks. Integration into production and measurable benefits With a compact inscribed circle and a standard thickness code, the insert integrates easily into common tool holders and indexable tool systems. The tolerance class M indicates consistent manufacturing precision, aiding repeatability across batches. For workshops aiming to increase throughput on stainless components, the combination of Tiger·tec Gold wear resistance and the MM5 chip control yields a favourable cost-per-part balance through longer edge life and reduced secondary operations. For machining stainless steel with predictable edge life, contact Metav Werkzeuge for application guidance or to secure Walter Tools Tiger·tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150404-MM5-WMP20G-WALTER Label: Drehwendeschneidplatte DNMG150404-MM5 WMP20G Walter Tools Manufacturer: Walter Tools Facts Inscribed circle / size: 15 Corner radius: 0.4 mm Thickness code: 04 Rake angle: 0° (negative) Geometry: Rhombus 55° Chipbreaker: MM5 Special features Grade: WMP20G (coated carbide) Series: Tiger·tec Gold Material application: stainless steel (ISO M) Tolerance class: M Product type: turning insert (indexable) Execution: G FAQ What materials is this insert best suited for? The DNMG150404-MM5 WMP20G insert is optimised for machining stainless steel (ISO M), offering stable chip formation and edge resistance for austenitic and similar grades. How does the MM5 chipbreaker affect cutting performance? The MM5 chipbreaker on this Walter Tools insert produces short, manageable chips and improves thermal control, which helps maintain a stable cutting edge and consistent surface finish. Can the insert handle interrupted cuts? The combination of rhombic 55° geometry, r0.4 corner radius and 0° negative rake gives the insert the mechanical strength required for intermittent cutting and moderate interruption. Is this insert compatible with standard DNMG tool holders? Yes; the DNMG150404-MM5 format conforms to common DNMG toolholder interfaces and can be indexed according to standard practice. What does tolerance class M imply for production? Tolerance class M denotes consistent manufacturing accuracy, supporting repeatable positioning and predictable part tolerances when the insert is mounted and indexed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between Metav Werkzeuge and the named brands. The offered item is original, brand-new goods from the manufacturer (Walter Tools).
DNMG150404-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WMP20S grade for reliable machining of stainless steel, together with the MM5 chipbreaker for stable chip control; order the insert directly via Metav Werkzeuge or ask the Metav consultants for application advice. DNMG150404-MM5 WMP20S turning insert — rhombic 55° for stainless steel, Walter Tools DNMG150404-MM5 WMP20S is a negative‑rake turning insert designed for medium to robust machining of stainless steel in interrupted and continuous cuts Tiger‑tec Silver coating for longer edge life WMP20S grade tuned to stainless steel machining MM5 chipbreaker for stable chip formation Rhombic 55° geometry for versatile turning Built for consistent performance in stainless applications The combination of the Tiger‑tec Silver coating and the WMP20S grade delivers a reliable solution when machining stainless steel. The advanced coating enhances thermal and wear resistance, which helps to maintain a stable cutting edge under the high temperatures typical for austenitic and other stainless alloys. As a consequence, tool life is improved and process variability is reduced, enabling more predictable cycle times and lower overall machining costs. The negative relief angle of 0° contributes to robust cutting edge support when facing tougher operational conditions. Predictable chip control and surface quality with MM5 The MM5 chipbreaker is optimised for the challenges of stainless machining: it promotes short, manageable chips and reduces the risk of built‑up edge formation. This directly benefits surface finish and reduces secondary operations. The modest corner radius of 0.4 mm supports a balance between edge strength and fine surface results, making the insert suitable for both finishing passes and light semi‑finishing where dimensional accuracy matters. Stable chip formation also improves tool condition monitoring and reduces unexpected downtime. Versatile geometry for day‑to‑day turning needs The rhombic 55° insert shape offers flexibility across a wide range of turning tasks, from profiling to light shoulder work. The plate thickness designation 04 and the DNMG form factor ensure compatibility with common toolholders used in industry, allowing quick tool changes and reduced setup time. The negative rake configuration gives the insert greater resistance to edge chipping in tougher cuts, which supports higher reliability in mixed batch production and when machining parts with variations in wall thickness or interrupted features. Practical benefits for production workflows Adopting this insert yields immediate operational advantages: improved tool life through coating technology, consistent chip behaviour thanks to the chipbreaker design, and broad applicability across stainless steel grades. These benefits translate into fewer tool changes, less scrap from poor surface finish, and smoother process chains. For production planners and shopfloor technicians, the predictable performance of this insert helps to stabilise machining parameters and simplifies tooling inventory, particularly when standardising on Tiger‑tec Silver‑coated grades. Contact Metav Werkzeuge for tailored recommendations on Walter Tools turning inserts and secure optimised results for stainless steel machining Technical data SKU: DNMG150404-MM5-WMP20S-WALTER Article designation: DNMG150404-MM5 WMP20S Series: Tiger‑tec Silver Grade: WMP20S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Execution: G Plate form: Rhombus 55° Plate size: 15 Plate thickness: 04 Corner radius: 0.4 Relief angle: 0° (negativ) Chipbreaker: MM5 Material group: M Suitable for: stainless steel Numbers / Core technical data Corner radius: 0.4 mm Relief angle: 0° (negative) Plate size: 15 Plate thickness: 04 Shape angle: 55° SKU: DNMG150404-MM5-WMP20S-WALTER Designs / Special features Coating technology: Tiger‑tec Silver Grade characteristics: WMP20S, coated carbide Application focus: stainless steel, medium to robust conditions Chip control: MM5 chipbreaker Geometry: rhombic insert for versatile turning Series note: optimised for stable chip formation and edge life FAQ What materials is this insert designed for? The insert is designed primarily for machining stainless steel; the WMP20S grade and Tiger‑tec Silver coating support stable cutting in these alloys. How does the MM5 chipbreaker affect cutting performance? The MM5 chipbreaker promotes controlled chip formation during turning, which improves surface finish and reduces the likelihood of built‑up edge when cutting stainless steel. Is the DNMG150404‑MM5 form compatible with standard toolholders? Yes, the DNMG150404 form factor and thickness designation 04 are commonly supported by industry toolholders for rhombic 55° inserts. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances thermal resistance and wear protection, leading to longer tool life and more consistent edge condition under elevated cutting temperatures. Can this insert be used for finishing as well as semi‑finishing? With a 0.4 mm corner radius and the MM5 chipbreaker, the insert is suitable for finishing and light semi‑finishing operations in stainless steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation. The offered item is an original, factory‑new product from the manufacturer.
DNMG150404-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver coating and the WSM10S grade delivers stable chip formation and extended cutting-edge life for demanding turning tasks; benefit from robust geometry and process security and order the component via Metav Werkzeuge or consult our application specialists for process optimisation. DNMG150404-MM5 WSM10S – Turning insert, Tiger‑tec Silver, negative 0° | Walter Tools The DNMG150404-MM5 WSM10S is a rhombic 55° turning insert designed for machining rostfreier Stahl and heat‑resistant superalloys or titanium in demanding production environments Tiger‑tec Silver coating for heat resistance WSM10S grade for tough alloys and titanium Negative 0° rake for sturdy cutting edges Rhombic 55° form with 0.4 mm corner radius Reliable cutting in high‑temperature materials The Tiger‑tec Silver coating paired with the WSM10S carbide grade is formulated to maintain a stable cutting edge under elevated temperatures typical for machining rostfreier Stahl and superalloys. This combination supports controlled chip formation and reduces the risk of built‑up edge, which in turn helps to preserve surface quality and extend tool life. The chemical and mechanical properties of the grade favour thermal stability and edge strength, enabling consistent performance where heat generation and material toughness challenge standard inserts. Operators and process engineers will notice fewer interruptions for insert changes and more predictable component tolerances when the correct grade and cutting data are applied. Geometry engineered for consistent results The rhombic 55° shape with a 0.4 mm corner radius and a negative 0° relief angle produces a strong cutting edge suited to interrupted cuts and heavy feed conditions. The MM5 chipbreaker geometry moderates chip size and evacuation, lowering the load on the toolholder and workpiece. This geometry supports a balance between edge strength and cutting action: the negative rake increases fracture resistance of the edge while the rhombic platform provides accessible cutting positions for indexed use. For engineers less familiar with these terms, negative rake means the insert presents a more robust face to the material, sacrificing a degree of cutting sharpness to gain durability and process reliability. Process efficiency and predictable tool life Using a coated grade optimised for difficult‑to‑machine materials results in measurable process benefits: longer intervals between indexings, reduced rework from surface defects, and improved overall productivity. The insert’s design and coating target stable wear behaviour, which supports repeatable cycles and predictable tool‑change planning. Integration into established tooling systems is straightforward owing to the standard DNMG geometry and Walter Tools’ compatibility with common toolholders. For purchasing and process planning, Metav Werkzeuge can advise on cutting parameters and clamping options to maximise the productivity and process security offered by this insert. Discuss application details with Metav Werkzeuge for optimal use of Walter Tools Tiger‑tec Silver inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150404-MM5-WSM10S-WALTER Label: Drehwendeschneidplatte DNMG150404-MM5 WSM10S Walter Tools Product type: Drehwendeschneidplatte / Turning insert Series: Tiger-tec Silver Grade: WSM10S Facts Size: 15 mm Corner radius: 0.4 mm Thickness: 04 Relief angle: 0° (negative) Shape: Rhombus 55° Special features Coating: Tiger‑tec Silver Chipformer: MM5 Material indication: S / M (heat‑resistant superalloys, titanium / rostfreie Stähle) Tolerance class: M Execution: G Manufacturer: Walter Tools FAQ What materials is this insert intended for? This insert is suited to rostfreie Stähle and heat‑resistant superalloys or titanium; the Walter Tools DNMG150404‑MM5 WSM10S grade is optimised for such demanding materials. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker moderates chip shape and evacuation, improving stability during turning and supporting consistent surface finishes with the DNMG geometry. Is the negative 0° rake suitable for interrupted cuts? Yes; the negative 0° relief angle provides a robust cutting edge that resists chipping under interrupted or heavy‑cut conditions when the DNMG insert is correctly applied. Which properties does the Tiger‑tec Silver coating provide? Tiger‑tec Silver increases thermal resistance and edge stability, which together reduce wear rates and support longer tool life for the WSM10S grade in high‑temperature cutting situations. Can standard DNMG holders be used with this insert? Standard holders compatible with DNMG150404 geometry can be used; correct clamping and following recommended cutting data are important to achieve the expected performance of the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM20S grade for stable chip control and extended tool life; the rhombic 55° geometry with 0° negative rake and a 0.4 mm corner radius supports consistent surface quality in demanding stainless and heat‑resistant alloy turning operations — order original Walter Tools inserts via Metav Werkzeuge or consult our specialists for application advice. DNMG150404‑MM5 WSM20S indexable turning insert — Tiger‑tec Silver coating, for stainless steels and superalloys (Walter Tools) A DNMG150404‑MM5 WSM20S indexable insert engineered for reliable machining of stainless steel and heat‑resistant superalloys, combining a robust chipbreaker with a compact rhombic geometry for secure cutting across roughing and near‑finish operations. Tiger‑tec Silver coated carbide grade WSM20S Optimised MM5 chipbreaker for secure chips Rhombic 55° geometry with 0° negative rake Suitable for stainless steel and superalloys Increased productivity through coating and grade optimisation The Tiger‑tec Silver coating together with the WSM20S grade is designed to resist abrasive wear and to maintain a stable cutting edge when machining stainless steel and high‑temperature alloys. This combination reduces flank wear and supports a predictable tool life, which in turn lowers process interruptions and increases component throughput. The coated cemented carbide substrate was developed for enhanced thermal resistance; as a result, machining parameters can be stabilised and cycle times improved without compromising surface integrity. Geometry and chip control that protect component quality The rhombic 55° insert shape and the MM5 chipbreaker deliver controlled chip formation and good access to interrupted or profile cuts. A 0.4 mm corner radius provides a balance between edge strength and achievable surface finish, while the 0° negative rake angle increases cutting edge robustness for tougher engagement conditions. These geometric attributes mean the insert is suitable for a range of turning tasks where consistent surface quality and predictable dimensional results are required. Application focus and process reliability for production workshops Intended for the machining of stainless steel (ISO group M) and heat‑resistant alloys (ISO group S), this insert supports operations where material toughness and thermal load are significant factors. Stable chip evacuation, promoted by the MM5 chipformer, reduces the risk of built‑up edge and tool damage, helping to minimise rework. The solution is well suited to batch production and mixed‑lot environments where repeatability and tool‑change predictability are priorities; technical consultation via Metav Werkzeuge can help match cutting data to the specific machine and workpiece material. Contact Metav Werkzeuge today to discuss the optimal grade, geometry and cutting data for Walter Tools DNMG150404‑MM5 WSM20S inserts and secure genuine parts for consistent production performance. Technical Data Article number / SKU: DNMG150404‑MM5‑WSM20S‑WALTER Designation: DNMG150404‑MM5 ISO designation: DNMG150404‑MM5 WSM20S Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Execution: G Tolerance class: M Facts Insert form: Rhombus 55° Insert size: 15 Thickness code: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Chipbreaker: MM5 Special features Coating: Tiger‑tec Silver (coated cemented carbide) Material suitability: stainless steel (M), heat‑resistant superalloys / titanium (S) Recommended use: turning, roughing to near‑finish depending on geometry Typical benefits: stable chip formation, good edge strength, process reliability FAQ What materials is this insert best suited for? The DNMG150404‑MM5 WSM20S insert is optimised for stainless steel (ISO group M) and for heat‑resistant superalloys (ISO group S), offering thermal stability and reliable chip control for these challenging materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating enhances wear resistance and heat management on the cutting edge of the insert, helping the WSM20S grade to provide longer tool life and steadier performance under elevated cutting temperatures. What is the effect of the MM5 chipbreaker? The MM5 chipbreaker is engineered for consistent chip segmentation and evacuation; this reduces the risk of built‑up edge and facilitates stable machining in both roughing and more delicate cutting passes. Which cutting tasks benefit most from the 0.4 mm corner radius? A 0.4 mm corner radius offers improved edge strength for interrupted cuts and allows acceptable surface finish in semi‑finishing and finishing applications, without overly increasing cutting forces. Is this an original Walter Tools product and where to obtain it? The insert is an original Walter Tools product — genuine items and application advice can be obtained through Metav Werkzeuge, who can support grade and geometry selection for specific production needs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are referenced solely for explanation and identification purposes. There is no affiliation between our company and the referenced brands. The offered item is an original, factory‑new product of the named manufacturer.
DNMG150404-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a high-performance, heat-resistant grade combined with a secure chip control geometry to maintain process stability and longer tool life. Benefit from the Tiger·tec Silver coating and the MM5 chipbreaker for efficient machining of stainless steel and heat-resistant alloys — order or consult Metav Werkzeuge for application support. DNMG150404-MM5 WSM30S turning indexable insert — Tiger·tec Silver, MM5 chipbreaker (Walter Tools) The DNMG150404-MM5 WSM30S is a coated turning insert designed for demanding applications in stainless steel and heat-resistant alloys, offering a robust negative 0° relief and a Rhombus 55° form for versatile turning operations. Tiger·tec Silver coating for heat resistance MM5 chipbreaker for stable chip control Rhombus 55° form, 0.4 mm corner radius Negative 0° relief for robust cutting Consistent high-temperature performance for fewer tool changes The combination of the Tiger·tec Silver technology and the WSM30S grade provides a coated carbide solution optimised for elevated cutting temperatures. The coating enhances thermal stability and wear resistance, which reduces flank wear and extends usable life under continuous cutting. For production environments where downtime is costly, this results in fewer insert changes and a more predictable machining cadence, improving overall process economy and reproducibility. Geometry and chip management that protect the cutting edge Engineered with an MM5 chipbreaker and a Rhombus 55° form, the insert produces controlled chips even in difficult-to-machine materials. The 0.4 mm corner radius and the 0° (negative) relief angle offer a balance between edge strength and surface integrity: the small corner radius supports fine finishes at moderate feeds, while the negative relief increases edge robustness during interrupted cuts. These geometric choices ensure stable chip flow and consistent surface quality, reducing the need for reworking. Targeted suitability for stainless steel and heat-resistant alloys Rated for material groups M and S per ISO 513, the insert is tailored for stainless steel and for heat-resistant superalloys and titanium, materials that typically generate high cutting temperatures and tend to form built-up edge. The WSM30S grade addresses these challenges through optimised microgeometry and coating interaction, supporting safe chip formation and a reliable cutting edge during continuous and semi-continuous turning. The result is improved productivity with fewer rejects and a stable manufacturing process. For demanding turning in stainless steel and superalloys, specify the Walter Tools DNMG150404-MM5 WSM30S via Metav Werkzeuge — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: DNMG150404-MM5-WSM30S-WALTER Type: Turning indexable insert Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Size: 15 Thickness code: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Geometry: Rhombus 55° Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: MM5 Material suitability: S / M (superalloys; stainless steel) Execution: G ISO designation: DNMG150404-MM5 WSM30S FAQ What materials is this insert intended for? The DNMG150404-MM5 WSM30S is optimised for stainless steel (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), supporting secure chip formation in challenging materials. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the WSM30S grade increases thermal and wear resistance, which helps to extend tool life and maintain cutting-edge stability under high temperatures. Which chipbreaker suits high-precision turning tasks? The MM5 chipbreaker delivers consistent chip control for both continuous and semi-continuous turning, improving surface finish and reducing the risk of built-up edge. Is the DNMG geometry compatible with standard toolholders? The insert follows the DNMG ISO geometry and is compatible with toolholders designed for DNMG turning inserts; compatibility should be verified against the machine tool holder specifications. What edge radius is best for fine finishing? The 0.4 mm corner radius supports improved surface quality at finishing feeds while maintaining sufficient edge strength for reliable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no connection between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
DNMG150404-MP3 WPP10G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating together with the MP3 chipbreaker for reliable chip control and extended tool life; order directly via Metav Werkzeuge or consult the team for application advice. DNMG150404-MP3 WPP10G turning indexable insert — Tiger·tec Gold, MP3 chipbreaker — Walter Tools The DNMG150404-MP3 WPP10G is a rhombic 55° turning insert designed for versatile turning operations in Stahl, combining a coated carbide grade with a robust chipbreaker for controlled machining. Tiger·tec Gold coating for high wear resistance MP3 chipbreaker for reliable chip control Rhombus 55° form for versatile turning 0° negative rake for stable cutting Consistent edge life through advanced coating technology The combination of the Tiger·tec Gold coating and the WPP10G grade delivers a balance of wear resistance and toughness that supports sustained production runs. As a coated carbide solution, this insert is optimised for the heat and chip formation typical of Stahl machining, which reduces flank wear and maintains cutting edge integrity. The result is fewer interruptions for tool changes and more predictable tool behaviour, supporting higher process stability and efficiency in serial turning. Controlled chip formation for safer, cleaner turning The MP3 chipbreaker is engineered to break and evacuate chips effectively during continuous turning, reducing the risk of long, entangling chips in the machining zone. For operations where consistent chip shape matters for tool life and workpiece finish, this geometry improves surface quality and decreases secondary handling. The insert’s chip control capability therefore contributes directly to smoother production cycles and reduced downtime. Geometry and clearance for stable cutting forces With a Rhombus 55° form and a 0° negative rake, the geometry prioritises strength at the cutting edge and axial versatility. The 0.4 mm corner radius supports a robust cutting edge capable of withstanding interrupted cuts and variable depths of cut without premature degradation. This configuration is particularly suitable where rigidity and repeatability are required, helping to maintain dimensional accuracy across batches while keeping cutting forces manageable. Application focus and material compatibility This indexable insert is specified for ISO group P applications and is therefore suitable for a wide range of Stahl workpieces, from unalloyed to alloyed steels. The WPP10G grade offers a mix of wear resistance and toughness that accommodates typical steel machining temperatures and chip formation behaviours. For shops seeking a practical, general-purpose turning solution, the insert delivers predictable performance across common turning tasks. Contact Metav Werkzeuge for targeted application advice on Walter Tools Tiger·tec Gold inserts and to arrange supply of DNMG150404-MP3 WPP10G through Metav Werkzeuge Technical Data Article number: DNMG150404-MP3-WPP10G-WALTER Article designation: DNMG150404-MP3 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Key Specifications Insert size: 15 mm Thickness: 4 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Special features Chipbreaker: MP3 Coating / material technology: Tiger·tec Gold (coated carbide) Application group: Stahl (ISO P) Execution: G Label: Drehwendeschneidplatte DNMG150404-MP3 WPP10G Walter Tools FAQ What materials is this insert suitable for? The DNMG150404-MP3 WPP10G is intended for Stahl applications (ISO P), designed to handle the heat and chip formation typical of steel turning. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the DNMG150404-MP3 WPP10G promotes controlled chip formation and evacuation, improving surface finish and reducing chip-related interruptions. What advantages does the Tiger·tec Gold grade provide? The Tiger·tec Gold grade combines wear resistance and toughness to extend tool life under the thermal and mechanical conditions encountered when machining Stahl. Is the insert suitable for interrupted cuts? Yes, the 0° negative rake and a 0.4 mm corner radius offer a robust cutting edge for better resistance during interrupted cutting conditions. How does the rhombic 55° shape influence application versatility? The Rhombus 55° geometry provides a balance between clearance and cutting edge strength, enabling a range of turning operations with consistent results. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
DNMG150404-MP3 WPP20G G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the MP3 chipbreaker for productive, reliable Stahl turning; the 0° negative rake and 0.4 mm nose radius deliver stable cutting and consistent surface quality. Order directly via Metav Werkzeuge or consult the advisors for tailored cutting data. DNMG150404-MP3 WPP20G Drehwendeschneidplatte — Tiger·tec Gold, for Stahl | Walter Tools The DNMG150404-MP3 WPP20G is a rhombic 55° turning insert designed for general turning of Stahl, combining a coated carbide grade with an MP3 chipbreaker for controlled chip formation. Tiger·tec Gold coating for longer life Optimised MP3 chipbreaker for Stahl Rhombic 55° plate, 0.4 mm nose radius 0° negative rake for stable cutting Durable, predictable cutting performance for Stahl turning The combination of Tiger·tec Gold coating and a coated carbide substrate gives a balance of wear resistance and toughness suitable for machining the ISO P group. The MP3 chipbreaker is engineered to control chip shape during medium to heavy cuts, which reduces the risk of entanglement and improves process security. A 0° negative rake increases edge strength under interrupted cuts, while the 0.4 mm nose radius enables reproducible surface finishes without compromising edge life. For production environments where stability and repeatability matter, this insert supports consistent cycle times and fewer tool changes. Productivity gains with extended tool life and stable chips Using a coated grade from the Tiger·tec Gold family, the insert is tailored to manage the typical heat and chip formation encountered when cutting Stahl. The WPP20G grade is a universal performer that favours wear resistance while retaining toughness for mixed batch work. That mix of properties translates into longer tool life and fewer indexings, which supports higher uptime on lathes and turning centres. The rhombic 55° geometry allows versatile entry angles and smooth transitions in profile turning, improving machining economy without sacrificing surface quality. Practical fitting and machining guidance for reliable results The DNMG format and the DNMG150404-MP3 designation indicate standard sizing and clamping compatibility with most toolholders for negative inserts. The geometric choices — Rhombic 55°, 0.4 mm nose radius, 0° negative rake — favour secure clamping, robust edge retention and easy engagement in general turning operations. When selecting feeds and speeds, practitioners often prioritise stable chip evacuation enabled by the MP3 breaker and modest cut depths to exploit the coating’s wear resistance; for specific process parameters, Metav Werkzeuge can supply tailored cutting data and application guidance to match the machining task. Contact Metav Werkzeuge today for application advice on Walter Tools Tiger·tec Gold inserts and request cutting data tailored to the machining task Technical Data SKU: DNMG150404-MP3-WPP20G-WALTER Article: DNMG150404-MP3 WPP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Size: 15 mm Thickness: 4 mm Nose radius: 0.4 mm Clearance angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G Chipbreaker: MP3 Plate form: Rhombus 55° Execution: G Base material designation: P (suitable for Stahl) ISO designation: DNMG150404-MP3 WPP20G FAQ Which materials is this insert intended for? The DNMG150404-MP3 WPP20G from Walter Tools is intended for the ISO P group and is optimised for machining Stahl. What nose radius is fitted and what effect does it have? The insert has a 0.4 mm nose radius, which helps to achieve consistent surface finishes while maintaining edge strength in the DNMG150404-MP3 WPP20G turning applications. What chipbreaker is used and why is it beneficial? The MP3 chipbreaker on the DNMG150404-MP3 WPP20G is designed to produce controllable chips when machining Stahl, improving chip flow and process reliability. Does the insert have a coating? Yes, the WPP20G grade belongs to the Tiger·tec Gold coating technology, providing a wear-resistant surface on a coated carbide substrate for extended life. What is the geometry and how does it affect mounting and cutting? The insert uses a Rhombic 55° form with a 0° negative rake, which offers stable cutting behaviour, reliable clamping and suitability for a range of general turning operations with the DNMG150404-MP3 WPP20G. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected brand names and trademarks remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
DNMG150404-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven MP5 chipbreaker and stable rhombic geometry to increase machining productivity and reduce tool change frequency; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150404-MP5 WPP10G Turning Insert — Tiger·tec Gold coating, for steel | Walter Tools The DNMG150404-MP5 WPP10G is a rhombic 55° turning insert engineered for efficient steel machining with an MP5 chipbreaker and a durable Tiger·tec Gold coating. Tiger·tec Gold coated for long life MP5 chipbreaker for stable chip control Rhombic 55° form for versatile turning 0° negative rake with 0.4 mm corner radius Boosted productivity through reliable cutting performance The combination of a Tiger·tec Gold coated carbide grade and a dedicated MP5 chipbreaker delivers consistent cutting results in steel machining. The coating enhances wear resistance and thermal stability, which translates into longer tool life and fewer interruptions for insert changes. The stable chip formation enabled by the chipbreaker reduces the risk of built-up edge and machine downtime, allowing more parts to be produced per shift and improving overall process efficiency. Precision geometry for consistent dimensional results The rhombic 55° insert shape and 0.4 mm corner radius are selected to balance strength and finish. This geometry provides the rigidity required for medium to finishing operations while maintaining a controlled cutting edge that supports predictable tool engagement. For shops seeking reproducible component quality, the insert’s tolerance class M and negative rake angle of 0° help maintain cutting forces and dimensional stability during serial turning of steels. Adapted grade and coating for steel applications The WPP10G grade belongs to Walter’s Tiger·tec Gold family and is optimised for machining steels (ISO group P). The grade composition and coating combination are designed for the typical heat generation and chip behaviour encountered when machining unalloyed and alloyed steels. In practical terms, that means improved resistance to flank and crater wear and a broader processing window for cutting speeds and feeds compared with uncoated alternatives. Practical benefits in everyday turning operations As a medium-profile turning insert with the MP5 groove, this product simplifies chip handling and is suited to a range of turning tasks where stable chips and surface quality matter. The insert’s dimensions and form make it compatible with common CNMG/DNMG toolholders that accept a rhombic 55° plate, enabling quick integration into existing toolsets and minimal setup time. The result is a cost-effective upgrade path for workshops aiming to increase throughput without major changes to fixturing or programmes. For recommendations on cutting data or to discuss suitability for specific steel grades, contact Metav Werkzeuge — our consultants will advise on optimised feed and speed settings for this Walter Tools turning insert. Technical Data Article number: DNMG150404-MP5-WPP10G-WALTER Designation: DNMG150404-MP5 WPP10G Product type: Turning insert Series: Tiger·tec Gold Grade: WPP10G Core specifications Insert shape: Rhombic 55° Size: 15 mm Thickness: 04 Corner radius: 0.4 mm Chipbreaker: MP5 Rake angle: 0° (negative) Tolerance class: M Materials & features Coating: Tiger·tec Gold (coated carbide) Suitable for: Steel (ISO P) Execution: G Manufacturer: Walter Tools FAQ What materials is this insert designed for? The DNMG150404-MP5 WPP10G is designed primarily for machining steels (ISO group P); the WPP10G grade and Tiger·tec Gold coating are optimised for typical steel heat and chip conditions. Which chipbreaker does the insert use and what is its benefit? This insert uses the MP5 chipbreaker, which ensures controlled chip formation and evacuation, improving process stability and reducing the risk of built-up edge during turning. What are the key geometry features to consider for setup? The rhombic 55° shape, 15 mm size, 0.4 mm corner radius and 0° negative rake together determine the insert’s cutting engagement and are important when selecting a compatible toolholder and setting cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com