DNMG150408-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and an MM5 chipbreaker for reliable cutting performance and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for application support. DNMG150408-MM5 WSM30S turning insert — Tiger·tec Silver, MM5 chipbreaker — Walter Tools The DNMG150408-MM5 WSM30S is a rhombic 55° turning insert engineered for medium to heavy machining tasks in rostfreier Stahl and heat‑resistant alloys, offering a balance of edge stability and chip control. Tiger·tec Silver coated for high process security Optimised MM5 chipbreaker for stable chip control Rhombus 55° form with 0° negative rake For rostfreier Stahl and heat‑resistant alloys Increased process reliability when machining demanding materials The coated turning insert provides a durable cutting edge tailored for rostfreier Stahl and nickel‑based or heat‑resistant alloys. The combination of the WSM30S grade and the Tiger·tec Silver coating reduces flank wear and improves resistance to thermal loads, which results in consistent edge life under intermittent or elevated cutting temperatures. For production environments where repeatability and minimal rework are critical, the insert’s composition supports secure chip formation and predictable tool change intervals. Stable chip control for uninterrupted production The MM5 chipbreaker geometry is optimised to break and evacuate chips reliably across a wide range of feeds and depths of cut. In practical terms, this means fewer interruptions for manual chip clearing and reduced risk of surface damage from uncontrolled swarf. The rhombic 55° shape combined with a 0.8 mm corner radius offers a compromise between strength and versatility, enabling efficient finishing and medium‑duty roughing while preserving surface integrity on demanding workpieces. Design features that support productivity and easy tool management Built on a DNMG150408 platform with a 0° negative rake, the insert is suited to operations requiring robust cutting geometry and resistance to edge chipping. Negative rake geometries favour stable cutting when higher feed rates or interrupted cuts are necessary. The insert’s format and the WSM30S coated carbide grade simplify grade selection for rostfreie applications and contribute to reduced tooling consumption through longer service intervals, supporting leaner inventory management and lower total process cost. Contact Metav Werkzeuge for application recommendations and availability of Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG150408-MM5-WSM30S-WALTER Designation: DNMG150408-MM5 WSM30S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Execution: G Facts Inscribed circle: 15 mm Corner radius: 0.8 mm Thickness: 04 Insert form: Rhombus 55° Rake: 0° (negativ) Tolerance class: M Special features Coating technology: Tiger·tec Silver Chipbreaker: MM5 Material suitability: S / M Recommended applications: rostfreier Stahl; heat‑resistant superalloys FAQ What materials is this insert best suited for? The DNMG150408-MM5 WSM30S is designed for rostfreier Stahl and heat‑resistant alloys, where the WSM30S grade and Tiger·tec Silver coating provide thermal resistance and stable cutting. How does the MM5 chipbreaker improve production? The MM5 geometry on this turning insert promotes controlled chip formation and evacuation, reducing interruptions and protecting the workpiece surface during continuous turning operations. What does the 0° negative rake mean for machining? A 0° negative rake gives the insert a robust cutting edge suited to medium‑duty and interrupted cuts; this improves edge life and reduces the tendency for chipping under high loads. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MP3 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Gold grade, precise chip control with the MP3 chipformer and a robust 0.8 mm corner radius for consistent production results; order directly via Metav Werkzeuge or consult the team for application advice. DNMG150408-MP3 WPP05G — Turning insert, Tiger‑tec Gold grade for Stahl (Walter Tools) DNMG150408-MP3 WPP05G is a negative‑relief, rhombic 55° turning insert designed for dependable finishing and medium‑roughing of Stahl components in turning operations. Tiger‑tec Gold coated carbide grade WPP05G MP3 chipformer for controlled chip flow Rhombic 55° insert geometry 0.8 mm corner radius for robust turning Maximum productivity through modern coating technology The combination of Tiger‑tec Gold technology and a coated carbide substrate provides significantly improved wear resistance and consistent cutting performance on Stahl. The coating reduces flank wear and improves edge stability under typical turning temperatures, which translates into longer tool life and fewer interruptions for index changes. For production environments seeking cost‑effective cycle times, this wear behaviour supports predictable tool schedules and improved throughput without frequent regrinding or replacement. Reliable chip control and geometry for stable turning The integrated MP3 chipformer is engineered to create controllable chip shapes across a wide range of feeds and depths, reducing the risk of entanglement and improving surface finish. Paired with the Rhombic 55° geometry and a 0° (negative) relief angle, the insert delivers a robust cutting edge that resists cratering during interrupted cuts and keeps vibration low. The 0.8 mm corner radius increases edge strength for medium cutting depths while still allowing clean part contours—beneficial where both dimensional accuracy and productivity matter. Practical advantages for workshop and production use With an insert size of 15 and a plate thickness of 4, this grade supports a good balance between rigidity and accessibility in close‑tolerance turning operations. The tolerance class M ensures repeatable seating in indexable toolholders and predictable part results. Because the substrate and coating are optimised for the thermal and mechanical behaviour of Stahl, operators can expect consistent surface finish and reduced downstream finishing effort, lowering overall manufacturing cost per part. Selection and application guidance for process security The DNMG variant with MP3 chipformer is a versatile choice for mixed‑batch and serial turning of Stahl, where consistent chip evacuation and edge life are priorities. When choosing cutting parameters, start with conservative feeds and increase until stable chip formation is observed; the coated grade tolerates moderate increases in cutting speed thanks to its thermal barrier. For questions about clamping, insert seat compatibility or recommended parameters for specific Stahl grades, technical consultation is available to tailor the solution to the machining centre and workpiece demands. Contact Metav Werkzeuge today for application support, parameter recommendations and direct ordering of Walter Tools DNMG150408-MP3 WPP05G to ensure immediate integration into production workflows Technical data Article number: DNMG150408-MP3-WPP05G-WALTER Designation: DNMG150408-MP3 WPP05G Brand: Walter Tools Numbers / Core technical data Insert size: 15 Thickness: 4 Corner radius: 0.8 mm Relief angle: 0° (negative) Insert shape: Rhombus 55° Tolerance class: M Designs / Special features Grade: WPP05G (Tiger‑tec Gold) Chipformer: MP3 Substrate: coated carbide Application group: P → Stahl Series: Tiger‑tec Gold Execution: G FAQ What materials is this insert suitable for? The DNMG150408-MP3 WPP05G is formulated for the P material group, specifically for machining Stahl, and its Tiger‑tec Gold coating optimises wear resistance for these applications. How does the MP3 chipformer improve machining? The MP3 chipformer produces controlled chip shapes that reduce entanglement and support safer evacuation, improving surface finish and process stability when turning Stahl. What are the dimensional specifications of the insert? The insert is size 15 with a thickness of 4 and a corner radius of 0.8 mm, supplied in the Rhombus 55° form and tolerance class M. Is this insert suitable for interrupted cuts or roughing? Yes, the negative relief and robust edge geometry make this insert suitable for interrupted cuts and medium roughing where a strong cutting edge and thermal resistance are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150408-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP3 chipbreaker for reliable chip control and consistent edge life; the robust 0.8 mm corner radius and negative 0° free angle support stable turning of steel components. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. Drehwendeschneidplatte DNMG150408-MP3 WPP10G — Turning indexable insert with Tiger·tec Gold coating (Walter Tools) The DNMG150408-MP3 WPP10G is a rhombic 55° indexable insert designed for productive turning of steel, combining a Tiger·tec Gold grade with an MP3 chipbreaker for controlled chips and long tool life. High-performance Tiger·tec Gold coating Optimised MP3 chipbreaker geometry For steel machining (ISO P) 0.8 mm corner radius for robust edge Longer cutting intervals through advanced coating technology The Tiger·tec Gold series delivers an improved wear resistance and a stable cutting edge under the typical thermal loads encountered when machining steel (ISO P). The WPP10G grade is a coated carbide formula optimised for a balance of wear resistance and toughness; this translates into fewer insert changes and higher machine uptime. Coated carbide means a hard substrate covered by engineered layers that reduce abrasion and adhesion; the result is consistent dimensional accuracy and extended edge life in serial production runs. Predictable chip control and secure cutting performance Chip formation is governed by the MP3 chipbreaker and the insert geometry. The rhombic 55° shape with a 0.8 mm corner radius and a 0° negative free angle yields a robust cutting edge that resists chipping while promoting manageable chip flow. The chipbreaker reduces turbulent swarf and helps maintain a steady cutting force, which benefits surface finish and tool life. For operators, this means improved process security and fewer interruptions due to unstable chips or premature edge breakdown. Versatility and process efficiency for general turning operations The DNMG-style insert in this specification suits a wide range of turning tasks in steel, from finishing to medium-depth turning, supported by a tolerance class M that ensures repeatable seating and clamping. Its compact format and standard DNMG150408-MP3 designation make it compatible with many toolholders, enabling quick index changes and minimal setup time. The combination of a coated grade, an effective chipbreaker and a proven insert form delivers a cost-efficient solution for batch production and job-shop environments, improving throughput without sacrificing surface quality. Contact Metav Werkzeuge today for tailored cutting data and toolholder recommendations for Walter Tools turning solutions — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal insert choice for specific steel grades Technical data Article number: DNMG150408-MP3-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150408-MP3 WPP10G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core data Insert shape: Rhombus 55° Insert size: 15 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Design / special features Grade: WPP10G Series: Tiger·tec Gold Chipbreaker: MP3 Coating: Tiger·tec Gold (coated carbide) Applicable material: Steel (ISO P) Execution: G FAQ What materials is this insert designed for? The DNMG150408-MP3 WPP10G insert (Walter Tools turning indexable insert) is optimised for steel in accordance with ISO P classifications, targeting unalloyed and alloyed steels. What advantages does the WPP10G grade provide? WPP10G denotes Walter Tools’ Tiger·tec Gold coated carbide grade, offering a balance of wear resistance and toughness that extends cutting intervals and stabilises edge life on steel workpieces. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the DNMG150408-MP3 promotes controlled chip formation and steady cutting forces, which improves surface finish and reduces the risk of chip-related interruptions. Is the insert suitable for finishing operations? Yes, the combination of the rhombus 55° geometry, 0.8 mm corner radius and the Tiger·tec Gold grade makes this insert suitable for finishing and medium-depth turning tasks in steel. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150408-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP20G grade for reliable, productive steel machining; the insert delivers stable chip control and a robust cutting edge, helping to maintain consistent cycle times. Order the required inserts via Metav Werkzeuge or consult the team for process recommendations. DNMG150408-MP3 WPP20G indexable turning insert — Tiger·tec Gold, for steel machining (Rhombic 55°) The DNMG150408-MP3 WPP20G is an indexable turning insert designed for steel applications; it pairs a coated carbide grade from the Tiger·tec Gold family with an MP3 chipbreaker and a rhombic 55° form to ensure dependable chip control and edge stability in general turning operations. Tiger·tec Gold coated carbide grade WPP20G Optimised MP3 chipbreaker for stable chips Rhombic 55° shape with 0.8 mm corner radius Negative 0° rake for robust turning High productivity for steel turning through an advanced coating philosophy The combination of Tiger·tec Gold coating and the WPP20G grade gives this insert a high process reliability in steel machining (ISO P). The coating technology reduces wear and supports a stable cutting edge over extended tool life, which in turn lowers downtime and improves overall productivity. For practical purposes, the coated carbide substrate is designed to handle the temperatures and chip formation typical for unalloyed and alloyed steels; this means fewer seat changes and a steadier production flow. Consistent chip control and improved surface quality thanks to the MP3 chipbreaker The MP3 chipbreaker is optimised for stable, controllable chip formation when turning steels. By guiding chips reliably away from the cutting zone, the insert reduces the risk of re-cutting and surface defects, contributing to a more consistent component finish. The rhombic 55° geometry helps to balance cutting forces and accessibility in medium- to general-purpose turning, while the 0.8 mm corner radius supports edge robustness in both finishing and light roughing passes. Robust geometry and dimensional stability for repeatable results With a negative 0° rake and an M tolerance class, the insert offers a conservative, sturdy cutting geometry that favours repeatable performance under varied cutting conditions. The plate thickness and stable edge preparation contribute to vibration resistance and predictable wear progression. These attributes make the insert suitable for job shops and production environments where repeatability and tool life predictability are priorities. Practical application advice to maximise tool life and process security For best results, match the insert to a toolholder that supports the rhombic 55° form and ensures minimal overhang to maintain rigidity. The insert is intended for steel machining as classified under ISO P; selecting cutting parameters that suit the WPP20G grade and the MP3 chipbreaker will yield balanced wear and good surface finish. If further parameter tuning is needed, Metav Werkzeuge provides technical advice and can assist with grade or geometry selection for specific steel grades. For reliable steel turning with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for order details and application support — Metav Werkzeuge can advise on correct insert selection and cutting parameters. Technical data Article number: DNMG150408-MP3-WPP20G-WALTER Identification: DNMG150408-MP3 WPP20G Manufacturer: Walter Tools Product type: indexable turning insert Core technical figures Insert size: 15 Corner radius: 0.8 mm Plate thickness: 04 Cutting angle: Rhombic 55° Rake angle: 0° (negative) Tolerance class: M Designs and key features Tiger·tec Gold coating technology Grade: WPP20G (coated carbide) Chipbreaker: MP3 Intended for steel machining (ISO P) Stable cutting edge and optimised chipformer FAQ What materials is this insert designed for? The DNMG150408-MP3 WPP20G insert from Walter Tools is intended for steel machining (ISO P), covering unalloyed and alloyed steels. How does the MP3 chipbreaker affect performance? The MP3 chipbreaker on the DNMG150408-MP3 WPP20G produces controllable, consistent chips that reduce re-cutting and support improved surface quality during turning of steel components. Why choose the Tiger·tec Gold graded WPP20G? The Tiger·tec Gold technology combined with the WPP20G grade provides enhanced wear resistance and a stable cutting edge, which translates into predictable tool life and dependable productivity in steel turning. Is the insert suitable for finishing and roughing? Yes — the rhombic 55° geometry and 0.8 mm corner radius give the DNMG150408-MP3 WPP20G flexibility for both light roughing and finishing operations, while the negative 0° rake supports robust cutting conditions. What tolerances and dimensional data are notable for setup? The insert carries a tolerance class M and a defined corner radius of 0.8 mm; these specifications support accurate repeatability and stable setup when paired with appropriate toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MP3 WPP30G Wendeplatten - Walter Tools
Take advantage of a balanced combination of productivity and edge life provided by the Tiger‑tec Gold coating and the MP3 chipbreaker; the result is predictable machining performance on steel and reduced tool-change frequency. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. DNMG150408-MP3 WPP30G – Turning indexable insert, Tiger‑tec Gold coated, for steel by Walter Tools DNMG150408-MP3 WPP30G is a rhombic 55° turning insert designed for steel machining, combining a Tiger‑tec Gold coated carbide grade with the MP3 chipbreaker for reliable chip control Tiger·tec Gold coated carbide grade WPP30G Rhombic 55° shape for versatile turning 0.8 mm corner radius for robust edge strength Designed for steel machining with MP3 chipbreaker High‑performance coating for longer, more consistent tool life The coated carbide grade WPP30G, part of the Tiger‑tec Gold family, is engineered for steel machining and compensates for the high temperatures and distinctive chip formation behaviour encountered in such operations. As a coated carbide insert, it delivers a notable compromise between wear resistance and toughness, which translates into stable edge life and predictable component quality under continuous cutting. The series description highlights suitability for unalloyed and alloyed steels according to ISO group P, offering an application‑orientated solution for both roughing and finishing where consistent productivity is required. Geometry and chip control that support productivity and surface quality The rhombic 55° geometry and the MP3 chipbreaker combine to provide a controlled cutting action and reliable chip formation when machining steels. The insert’s 0° (negative) clearance angle contributes to a robust cutting edge suitable for intermittent cuts or heavier engagement, while the 0.8 mm corner radius increases resistance to chipping and supports steady surface finish performance. Together, these features reduce the need for frequent index changes and make the insert a practical choice for varied turning tasks where tool stability and repeatable quality are priorities. Application range, handling and workshop benefits Marked as a P‑grade solution for steel workpieces, this turning insert suits a broad spectrum of steels and typical turning operations. The MP3 chipbreaker is optimised for reliable swarf control in these materials, lowering the risk of recutting and improving cycle time consistency. As a standardised indexable insert, it fits established toolholders and can be integrated into existing turning processes without additional fixture investment. The combination of geometry, coating and grade supports operational efficiency and helps reduce unplanned downtime through fewer insert changes and more uniform tool performance. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts for steel machining and receive tailored cutting recommendations; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: DNMG150408-MP3-WPP30G-WALTER Designation: DNMG150408-MP3 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP30G Facts Corner radius: 0.8 mm Free clearance angle: 0° (negative) Shape: Rhombic 55° Chipbreaker: MP3 Tolerance class: M Special features Coated carbide grade Tiger‑tec Gold Intended material group: steel (ISO P) Robust edge for interrupted cuts Versatile geometry for diverse turning tasks FAQ What materials is this insert intended for? The DNMG150408‑MP3 WPP30G insert is designed primarily for steel machining and is classified for ISO group P applications, providing reliable performance on unalloyed and alloyed steels. How does the MP3 chipbreaker improve machining? The MP3 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation when turning steels, which enhances process stability and reduces the chance of chip entanglement. What advantage does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold coating on the WPP30G grade increases wear resistance and thermal stability during cutting of steel, resulting in more consistent tool life and component surface quality. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Tel: +49 7071 183‑0 The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are owned by their respective proprietors. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the manufacturers named here. The offered item is an original, factory‑new product of the manufacturer.
DNMG150408-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating, MP5 chipbreaker geometry and a 0.8 mm corner radius to ensure stable, productive turning of steel components; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. DNMG150408-MP5 WPP05G indexable turning insert by Walter Tools — Tiger·tec Gold, MP5 chipbreaker for steel The DNMG150408-MP5 WPP05G is a rhombic 55° indexable turning insert engineered for reliable steel machining in production and job-shop environments Tiger·tec Gold coating for enhanced wear resistance MP5 chipbreaker for reliable chip control Rhombic 55° form with 0.8 mm corner radius Negative 0° rake for stable turning performance Increased productivity through a wear-resistant grade The combination of the Tiger·tec Gold coating with the WPP05G grade delivers measurable improvements in tool life and process stability when machining steels. The advanced coating reduces flank and crater wear under typical steel cutting temperatures, which lowers the cost per part and reduces tool changes. As a result, machining cycles run with fewer interruptions and consistent component quality is maintained across serial production. Predictable chip behaviour and surface consistency The integrally designed MP5 chipbreaker and the rhombic 55° geometry with a 0.8 mm corner radius support controlled chip formation when cutting steel. This geometry promotes short, segmented chips in many turning conditions and helps protect the cutting edge during interrupted cuts. The negative 0° rake further enhances stability, making the insert well suited to facing and medium-depth turning where robustness and repeatable surface finish are priorities. Versatility for common steel applications Marked for material group P (steel), the insert is optimised for unalloyed and alloyed steels according to ISO classifications. The grade balances toughness and wear resistance to handle a range of steel conditions from general-purpose turning to more demanding, abrasion-prone operations. For production-focused workshops and CNC turning centres, this insert provides a straightforward basis for process standardisation and reliable cycle times. Simple integration and economical operation The DNMG form and the tolerance class ensure straightforward indexing and repeatable seat location in standard toolholders, supporting quick insert changes and minimal machine downtime. With a practical plate size and compact thickness, the geometry fits common holders and supports consistent clamping behaviour. The result is lower setup time, predictable tool performance and an opportunity to reduce overall machining costs through fewer tool offsets and less scrap. Contact Metav Werkzeuge today to request specific cutting speeds and feeds or to arrange supply of the DNMG150408-MP5 WPP05G insert by Walter Tools; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DNMG150408-MP5-WPP05G-WALTER Label: Drehwendeschneidplatte DNMG150408-MP5 WPP05G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert ISO designation: DNMG150408-MP5 WPP05G Series: Tiger·tec Gold Grade: WPP05G Numbers Corner radius: 0.8 mm Plate size: 15 mm Thickness: 04 Free rake angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: MP5 Plate form: Rhombus 55° Material application: Steel (P) Execution: G FAQ What materials is this insert intended for? The DNMG150408-MP5 WPP05G insert by Walter Tools is specified for material group P and is designed primarily for machining steel, including unalloyed and various alloy steels. How does the MP5 chipbreaker improve operations? The MP5 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation during turning, which enhances chip control and supports consistent surface finish and tool life. Is the DNMG format compatible with standard toolholders? Yes, the DNMG form is a standard indexable geometry and the DNMG150408-MP5 WPP05G fits conventional DNMG toolholders, enabling rapid indexing and straightforward replacement. Which benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP05G grade improves wear resistance and cutting-edge stability in steel applications, contributing to longer service life and reduced downtimes. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DNMG150408-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the MP5 chipbreaker for consistently high productivity in Stahl turning; the rhombic 55° geometry and 0.8 mm corner radius provide a dependable balance of edge strength and surface finish. Order the insert directly via Metav Werkzeuge or consult our technical advisers for tailored cutting-data recommendations. DNMG150408-MP5 WPP10G – Indexable turning insert, Tiger·tec Gold coating (Walter Tools) The DNMG150408-MP5 WPP10G is an indexable turning insert engineered for general Stahl machining, combining a coated-carbide grade with a controlled-chip MP5 geometry for reliable production turning. Tiger·tec Gold coating for extended tool life Optimised MP5 chipbreaker for stable chip formation Rhombic 55° geometry for versatile turning applications Suited to Stahl (ISO P) machining conditions High, predictable wear resistance for production turning The coated-carbide grade WPP10G, produced within the Tiger·tec Gold family, is designed to deliver consistent wear resistance in typical Stahl cutting conditions. A modern multilayer coating reduces flank wear and improves resistance to built-up edge, which translates into longer tool life and fewer tool changes on the shop floor. For planners and process engineers, this means improved uptime and a clearer return on tooling investment. The term coated carbide denotes a cemented-carbide substrate with a thin, engineered coating that protects the cutting edge from heat and abrasion during high-volume turning. Stable chip control and repeatable surface quality The MP5 chipbreaker, combined with the rhombic 55° form and a 0° (negative) relief, creates controlled chip segmentation and predictable cutting forces. The 0.8 mm corner radius offers a compromise between edge robustness and the ability to maintain fine surface finishes on parts. Stable chip formation reduces the risk of entanglement and improves process reliability, particularly in automatic lathes and bar-feed operations. Where cycle consistency and reduced scrap are key performance indicators, this geometry aids in achieving repeatable results with minimal adjustments. Practical selection for workshop efficiency and interchangeability Supplied in the DNMG150408-MP5 designation, the insert follows established ISO form and sizing conventions—inscribed circle 15 mm and plate thickness corresponding to code 04—facilitating straightforward replacement within existing toolholders. The tolerance class M supports consistent seating and repeatability. The grade targets the ISO P group (Stahl), covering a broad spectrum of unalloyed and alloyed steels; this universality simplifies inventory and reduces the number of specialised grades required at the bench. For procurement and shop-floor teams, the combination of a proven grade and a standard geometry supports streamlined logistics and reliable process windows. Discuss application parameters and cutting-data recommendations with Metav Werkzeuge’s team for optimised results; contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DNMG150408-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150408-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Numbers / Core technical data Inscribed circle: 15 mm Corner radius: 0.8 mm Relief angle: 0° (negative) Thickness: 4 mm Tolerance class: M Special features / Versions Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP5 Plate form: Rhombus 55° Plate designation: DNMG150408-MP5 Application group: P (Stahl) FAQ What materials is this insert intended for? The DNMG150408-MP5 WPP10G is formulated for ISO P applications and is therefore intended primarily for machining Stahl, including unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on the WPP10G grade reduces abrasion and thermal wear, which extends edge life and supports longer uninterrupted production cycles with fewer tool changes. Which chip control behaviour can be expected from the MP5 breaker? The MP5 chipbreaker provides segmented, controllable chips ideal for stable turning operations; the geometry supports reliable evacuation and reduces the chance of chip-related interruptions. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG150408-MP5 designation follows standard ISO geometry, enabling compatibility with toolholders designed for DNMG inserts and ensuring straightforward indexability. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
DNMG150408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating, the universal WPP20G grade and the MP5 chipbreaker for stable chip formation and dependable steel machining; order the insert directly via Metav Werkzeuge or consult the specialists for tailored cutting data. DNMG150408-MP5 WPP20G — Turning insert, Tiger·tec Gold for steel (Walter Tools) The DNMG150408-MP5 WPP20G is an indexable turning insert designed for steel machining, combining a durable coated carbide grade with a stabilising chipbreaker and a 0.8 mm corner radius. Tiger·tec Gold coating for wear resistance Universal WPP20G grade for steel machining MP5 chipbreaker for stable chip control 0.8 mm corner radius for edge strength Precision and extended tool life for steel turning The coated carbide in the Tiger·tec Gold family and the WPP20G composition provide a balanced combination of hardness and toughness, optimised for typical heat generation and chip formation when machining steel. This insert achieves a measurable extension of tool life through its advanced surface treatment, which reduces abrasive wear while maintaining a robust cutting edge. The grade's universality simplifies inventory: one turning geometry covers a broad range of steels, reducing tool changes and downtime. The result is consistent component quality and fewer interruptions in a production cycle. Consistent chip control and process reliability Equipped with the MP5 chipbreaker and a negative rake 0°, the insert excels at producing short, controllable chips under most turning conditions. The combination of the chipbreaker geometry and the insert's Rhombus 55° profile promotes predictable chip flow, reducing the risk of entanglement and machine stoppages. The 0.8 mm corner radius increases edge strength, improving resistance to impact and breakouts during interrupted cuts. In practice, this leads to more stable cutting forces, improved surface finishes and lower scrap rates in serial turning operations. Seamless integration into machining workflows The indexable design and the standard designation facilitate straightforward toolholder matching and process planning. With a tolerance class M and the common DNMG format, the insert fits established clamping systems and programming habits, allowing rapid replacement without extensive machine adjustment. The coated carbide composition reduces the need for frequent regrinds, supporting higher productivity and predictable maintenance intervals. Where repeatability and throughput matter, the insert supports efficient production by combining easy handling with technical performance. Contact Metav Werkzeuge for cutting data recommendations and availability of Walter Tools Tiger·tec Gold turning inserts Technical data SKU: DNMG150408-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMG150408-MP5 WPP20G Walter Tools Manufacturer/Brand: Walter Tools Product type: Drehwendeschneidplatte (turning insert) Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP5 Plate form: Rhombus 55° Corner radius: 0,8 Free angle: 0° (negativ) Plate size: 15 Plate thickness code: 04 Tolerance class: M Material code: P Core specifications Corner radius: 0.8 mm Free rake angle: 0° (negative) Plate form: Rhombus 55° Plate size: 15 (code) Plate thickness: 04 (code) Tolerance: M Materials & special features Coating technology: Tiger·tec Gold (coated carbide) Grade characteristics: Universal, wear-resistant, good toughness balance Chip management: MP5 chipbreaker for stable chips Suitable for: Steel (ISO group P) Application: Turning operations Shape benefits: Rhombus 55° for versatile cutting angles FAQ Which materials is this insert best suited for? The DNMG150408-MP5 WPP20G is specified for steel (ISO group P); the WPP20G grade and Tiger·tec Gold coating are balanced for common unalloyed and alloyed steels. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes short, controllable chips, improving process stability and reducing the likelihood of chip-related interruptions. What does the 0.8 mm corner radius mean for edge performance? A 0.8 mm corner radius increases edge strength and resistance to chipping, which is beneficial for interrupted cuts and when consistent surface quality is required. Is the insert compatible with common DNMG toolholders? Yes; the DNMG format is a standard indexable geometry and fits compatible holders, allowing quick indexation and replacement with minimal setup. Does the Tiger·tec Gold coating require special cutting parameters? The Tiger·tec Gold coating provides improved wear resistance and allows a broad usable parameter window; cutting data should be matched to workpiece steel and machine rigidity for optimal results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and precise MP5 chip control for efficient steel turning; the robust geometry and medium corner radius deliver stable performance in serial production. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150408-MP5 WPP30G — Indexable turning insert for steel, Tiger·tec Gold (Walter Tools) The DNMG150408-MP5 WPP30G is a rhombic 55° indexable insert engineered for reliable turning of steel, offering stable chip formation and long tool life. Tiger·tec Gold coated carbide MP5 chipbreaker for consistent chips Negative 0° rake for robust cutting 0.8 mm corner radius for medium finishing Balanced grade for demanding steel machining The WPP30G grade from the Tiger·tec Gold series combines a wear-resistant coating with a carbide substrate to provide a consistent balance between edge life and toughness. Designed for ISO group P (steel), the grade suits unalloyed and alloyed steels where heat and chip behaviour require a resilient coating. This balance reduces unplanned tool changes and supports steady machining cycles, contributing to higher uptime and predictable process windows. Geometry and chip control that stabilise production The rhombic 55° format together with a 0° (negative) rake and the MP5 chipbreaker create a geometry focused on stability and reliable chip formation. The 0.8 mm corner radius offers a compromise between strength and surface quality, allowing medium finishing passes while maintaining edge robustness. The insert's thickness and form ensure repeatable seating in toolholders and help to dampen vibration during heavier cuts, which results in improved dimensional consistency of turned components. Practical advantages in workshop workflows With a tolerance class M, this insert supports standard accuracy requirements for production turning. The DNMG designation reflects a widely used indexable form that fits many toolholder systems, simplifying logistics and tool management. The coated carbide design reduces flank and crater wear, extending usable life under typical steel cutting conditions. For operations seeking a reliable, general-purpose turning solution, this insert offers a pragmatic mix of longevity and process security without sacrificing surface finish. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts; telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitable grades, holders and cutting strategies Technical data SKU: DNMG150408-MP5-WPP30G-WALTER Article designation: DNMG150408-MP5 Full designation: DNMG150408-MP5 WPP30G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Core specifications Insert form: Rhombic 55° Corner radius: 0.8 mm Size (inscribed circle): 15 mm Thickness: 4.0 mm Free cutting angle: 0° (negative) Tolerance class: M Design & special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MP5 Application: Steel (ISO group P) Substrate: coated cemented carbide Robust geometry for stable turning FAQ What materials is this insert suitable for? The DNMG150408-MP5 WPP30G is specified for ISO group P and is intended for machining unalloyed and alloyed steel; the WPP30G coating optimises wear behaviour under typical steel cutting conditions. Which chip control can be expected from this insert? The MP5 chipbreaker offers consistent chip formation for a range of turning operations, supporting secure evacuation and reduced entanglement in common steel applications. Is this insert compatible with standard DNMG toolholders? Yes, the DNMG geometry corresponds to standard rhombic 55° toolholder seats, allowing easy integration into existing tool systems that accept DNMG inserts. What surface quality can be achieved with the 0.8 mm corner radius? A 0.8 mm corner radius provides a good compromise between edge strength and surface finish, suitable for medium finishing operations where robustness and acceptable surface quality are both required. How does the Tiger·tec Gold grade affect tool life? The Tiger·tec Gold coating on the WPP30G grade enhances resistance to flank and crater wear, often resulting in longer effective tool life under comparable cutting conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. The offered article is an original, factory-new product from the manufacturer.
DNMG150408-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Silver coating and the WSM01 carbide grade for secure chip formation and long tool life; the robust rhombic 55° geometry with a 0.8 mm corner radius gives reliable dimensional stability in demanding stainless and heat‑resistant alloy turning. Order directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408-MS3 WSM01 indexable turning insert — Walter Tools, Tiger‑tec Silver, for stainless steels and superalloys DNMG150408-MS3 WSM01 is an indexable turning insert engineered for demanding turning operations on stainless steels and heat‑resistant superalloys, combining a coated carbide grade with a secure chipcontrol geometry Tiger‑tec Silver series for improved tool life WSM01 grade optimised for stainless and superalloys Rhombic 55° form with 0.8 mm corner radius MS3 chipbreaker for secure chip control Consistent performance when machining demanding alloys The combination of the Tiger‑tec Silver surface technology and the WSM01 carbide grade delivers a balance between wear resistance and edge toughness that is crucial for machining stainless steels and superalloys. These materials tend to generate heat and promote built‑up edge; the coated grade supports stable edge integrity and predictable wear behaviour, which reduces unplanned tool changes and helps maintain process quality over longer production runs. The result is a measurable improvement in component finish and dimensional repeatability. Precision geometry that protects both tool and workpiece The rhombic 55° insert form and the 0.8 mm corner radius create a geometry that resists chipping while maintaining good cutting action. A negative 0° rake increases edge strength and is suitable for interrupted cuts or roughing operations where robustness matters. This geometry reduces the risk of premature edge failure and supports consistent workpiece tolerances, meaning fewer reworks and a more stable machining cycle for high‑value parts. Chip control and process stability for higher productivity The MS3 chipbreaker is designed to produce controllable chip shapes when cutting tough materials, improving evacuation in both short and long‑turning operations. Combined with the Tiger‑tec Silver surface, the insert maintains a stable cutting edge and predictable friction behaviour, which helps reduce cycle times and extend tool life. Better chip control and less edge built‑up translate directly into higher productivity and lower overall tooling cost per component in series production. Compatibility, handling and recommended applications The insert is supplied in the DNMG150408‑MS3 designation and is available in the Tiger‑tec Silver series with tolerance M, making it suitable for turning tasks that prioritise process security and reproducible results. Marked as appropriate for material groups S / M, the geometry and grade are particularly effective on stainless steels and heat‑resistant nickel‑based alloys. For selection, match the corner radius and insert form to the required surface finish and cutting depth; for interrupted cuts, favour the negative rake for increased edge protection. The DNMG150408‑MS3 WSM01 insert is a reliable choice when repeatable performance on demanding alloys is required. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice on Walter Tools Tiger‑tec Silver inserts and tailored recommendations for stainless and superalloy turning tasks Technical Data Article number: DNMG150408-MS3-WSM01-WALTER Designation: DNMG150408-MS3 WSM01 Manufacturer: Walter Tools Facts Insert size: 15 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Form: Rhombic 55° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MS3 Material suitability: S / M (heat‑resistant superalloys, titanium) Suitable for: stainless steels (M) Execution: G Base designation: DNMG150408-MS3 Product type: indexable turning insert FAQ What materials is this insert best suited for? The DNMG150408‑MS3 WSM01 insert is optimised for stainless steels and heat‑resistant superalloys (groups M and S), where the WSM01 grade supports stable chip formation and edge life. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker produces controllable chip shapes that improve evacuation and reduce the risk of entanglement, enhancing process stability with the DNMG150408‑MS3 WSM01 in both finishing and roughing cuts. What advantages does the Tiger‑tec Silver series provide? The Tiger‑tec Silver surface treatment offers improved wear resistance and consistent friction behaviour, contributing to longer tool life and more predictable machining performance with the DNMG150408‑MS3 WSM01 insert. Is the insert suitable for interrupted cuts? Yes, the negative 0° relief and the robust geometry make this insert suitable for interrupted cuts where increased edge strength is required. Which corner radius should be selected for heavy‑duty turning? The standard 0.8 mm corner radius offers a compromise between edge strength and surface finish; selecting a larger radius will increase robustness for heavier cuts, while a smaller radius favours finer finishes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the MS3 chipbreaker and the robust rhombic geometry for secure machining of stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the technical advisers for cutting data and selection. DNMG150408‑MS3 WSM10S — Indexable turning insert (Tiger‑tec Silver) by Walter Tools The DNMG150408‑MS3 WSM10S is an indexable turning insert engineered to deliver stable cutting performance in stainless steels and heat‑resistant superalloys, optimised for demanding production environments. Tiger‑tec Silver coating for heat resistance Optimised MS3 chipbreaker for stable chip control Rhombic 55° form with 0° negative rake 0.8 mm corner radius for consistent edge strength Consistent results in stainless steels and superalloys The combination of the Tiger‑tec Silver coating and the WSM10S carbide grade is designed to counteract the typical challenges of machining stainless steels and heat‑resistant alloys specified under ISO 513. The coating increases thermal resistance and reduces adhesion at the cutting edge, which supports secure chip formation and lowers the risk of build‑up edge. This results in fewer interruptions, more reproducible component surfaces and higher productivity on continuous turning operations. Better chip control reduces rework and downtime The integrated MS3 chipbreaker provides reliable chip segmentation even under variable cutting conditions. A well‑executed chipbreaker reduces entanglement and improves evacuation from the cut, which minimises the likelihood of tool damage and machine stops. For production lines where cycle time and machine availability are critical, the improved chip behaviour translates directly into lower rework rates and smoother downstream handling. Geometry that balances strength and versatility The rhombic 55° insert form combined with a 0° negative rake gives a robust cutting edge suited to medium and heavy turning operations. The 0.8 mm corner radius increases edge strength and extends usable cutting life when operation parameters require intermittent heavy cuts or face hardened zones. Negative rake geometry lowers cutting edge stress during interrupted cuts, offering reliable performance across varying workpiece conditions without sacrificing finish when parameters are set appropriately. Integration into tool setups and process planning The indexable insert follows the DNMG format, making it compatible with common toolholders that accept this standard shape and size. Its coated carbide construction is intended to be part of a complete machining strategy: select appropriate cutting speeds and feeds for stainless steels and superalloys, and combine the insert with suitable coolant or dry‑cutting strategies as required by the component material. For precise cutting data, the technical advisers at Metav Werkzeuge can provide guidance tailored to the workpiece alloy and production goals. Contact Metav Werkzeuge today to specify the Tiger‑tec Silver WSM10S insert for robust stainless steel machining; technical advisers are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: DNMG150408-MS3-WSM10S-WALTER Label: Drehwendeschneidplatte DNMG150408-MS3 WSM10S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Shape: Rhombus 55° Chipbreaker: MS3 Execution: G Tolerance class: M Material group: S / M UID: DNMG150408-MS3-WSM10S-WALTER Core technical data Corner radius: 0.8 mm Relief / rake: 0° (negative) Size code: 15 Thickness code: 04 ISO designation: DNMG150408-MS3 WSM10S Special features Coated carbide cutting material Designed for stainless steels (M) and superalloys/titanium (S) Enhanced thermal resistance via Tiger‑tec Silver coating Stable chip control with MS3 chipbreaker Robust rhombic geometry for interrupted cuts Walter Tools original production quality FAQ Is this insert suitable for machining stainless steels? Yes. The DNMG150408‑MS3 WSM10S insert, produced under the Tiger‑tec Silver technology, is specifically designed for stainless steels (ISO group M) and provides improved thermal resistance and stable chip formation. What advantages does the MS3 chipbreaker offer? The MS3 chipbreaker on this Walter Tools insert promotes regular chip segmentation and evacuation, reducing chip‑related interruptions and improving process reliability during continuous turning operations. How does the 0° negative rake affect cutting? A 0° negative rake increases edge robustness for heavier or interrupted cuts; the DNMG150408‑MS3 geometry therefore favours stable performance where edge strength is more critical than aggressive shear. Can this insert be used for heat‑resistant superalloys and titanium? Yes. The WSM10S grade and Tiger‑tec Silver coating are suitable for ISO group S materials, helping to manage heat and wear when machining superalloys and certain titanium alloys. Where can cutting data and selection advice be obtained? Process and cutting‑data recommendations for the DNMG150408‑MS3 WSM10S are available from Metav Werkzeuge; the product is stocked and technical advisers can assist with parameter specification for the intended material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MU5 WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, Tiger·tec Gold coating performance and a robust negative-rake geometry for consistent productivity in rostfreier Stahl turning operations — order directly via Metav Werkzeuge or request tailored application advice from our consultants. DNMG150408-MU5 WMP20G — indexable turning insert for rostfreier Stahl | Walter Tools DNMG150408-MU5 WMP20G is an indexable turning insert engineered for secure chip formation and repeatable performance in rostfreier Stahl machining under moderate to robust conditions. *Tiger·tec Gold coating for high process security *MU5 chipbreaker for stable chip control *0° (negative) rake for secure cutting *Rhombus 55° form with 0.8 mm corner radius Stable chip control for rostfreier Stahl with Tiger·tec Gold The combination of the WMP20G substrate and the Tiger·tec Gold coating delivers consistent chip formation when machining rostfreier Stahl, a material group known for high toughness and tendency to form built-up edge. The integrated MU5 chipbreaker is optimised for medium to heavy engagement, reducing the risk of long, stringy chips and improving process reliability. By promoting secure breakage and preventing unstable cutting conditions, the insert supports predictable cycle times and fewer interruptions for clearing chips, which directly benefits throughput and shop-floor efficiency. Geometry and edge design that increase tool life and security Built on a DNMG150408-MU5 platform, the insert features a Rhombus 55° shape and a 0° (negative) free angle that prioritises robustness in interrupted or heavy cuts. The 0.8 mm corner radius and the 04 thickness provide a solid cutting edge that resists chipping and wear under higher mechanical loads. This geometry translates into a stable contact area, improved edge security and prolonged service intervals. For production environments where repeatability and predictable tool-change intervals matter, the insert’s shape and edge specification help to reduce unplanned downtime and maintain component quality. Proven process security and straightforward integration in turning setups Designed for ISO material group M, the insert is particularly suited to rostfreier Stahl applications where temperature and adhesion challenge conventional grades. Its standard DNMG form ensures compatibility with common tool holders, allowing fast replacement without complex adjustments. The coated carbide grade supports stable cutting edges and consistent surface finish across serial runs, which helps to lower scrap rates and improve first-pass yield. When combined with a controlled machining strategy, this insert contributes to measurable improvements in process reliability and overall cost-efficiency. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools DNMG150408-MU5 WMP20G inserts and to request a customised order or technical consultation Technical data Article number: DNMG150408-MU5-WMP20G-WALTER Product designation: DNMG150408-MU5 WMP20G Manufacturer: Walter Tools Product type: indexable turning insert Facts Size: 15 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Shape: Rhombus 55° Chipbreaker: MU5 Grade family: WMP20G Series: Tiger·tec Gold Grade category: M Special features Coating technology: Tiger·tec Gold Substrate/coating: coated carbide Execution: G Suitable for: rostfreier Stahl ISO material group suitability: M Stable chip control under medium to robust conditions FAQ What types of materials is this insert designed for? The DNMG150408-MU5 WMP20G insert is optimised for rostfreier Stahl (ISO group M), providing good chip control and edge stability in demanding stainless applications. Which chipbreaker and coating does the insert use? This insert features the MU5 chipbreaker and the Tiger·tec Gold coating, delivering improved chip formation and enhanced resistance to built-up edge during turning. What does the negative 0° free angle mean in practice? A 0° (negative) free angle increases edge security and robustness; the insert therefore performs well in interrupted cuts or heavier machining passes where edge stability is critical. Will the insert fit standard DNMG tool holders? Yes, the DNMG format is a standard indexable insert form and the DNMG150408-MU5 WMP20G is compatible with holders designed for DNMG inserts, facilitating quick replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
DNMG150408-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WMP20S grade for reliable machining of rostfreier Stahl, together with the MU5 chipbreaker for secure chip control; order directly via Metav Werkzeuge or request consultancy for optimum process settings. DNMG150408-MU5 WMP20S — Indexable turning insert, Tiger·tec Silver coating (Walter Tools) DNMG150408-MU5 WMP20S is an indexable turning insert designed for medium to robust machining of rostfreier Stahl in industrial turning applications. Tiger·tec Silver coating technology WMP20S grade for rostfreier Stahl Rhombus 55° plate form for versatility 0.8 mm corner radius, MU5 chipbreaker High-performance turning for rostfreier Stahl The WMP20S grade paired with the Tiger·tec Silver coating is engineered to address the challenges of machining rostfreier Stahl, where toughness and heat generation are critical. The combination provides improved thermal resistance and consistent edge stability, which results in fewer unplanned tool changes and a steadier process flow. The insert’s construction supports secure chip formation under medium to robust cutting conditions, contributing to reproducible component quality and lower overall machining cost per part. Stable chip control and predictable tool life The MU5 chipbreaker is designed for controlled chip segmentation and evacuation when cutting stainless alloys, ensuring that chips are manageable in automated and manual turning operations. With this chip control, coolant interaction and cutting forces are more predictable, which supports longer tool life and reduces the need for secondary interventions. The result is higher machine uptime and improved process repeatability for batch and series production. Versatile geometry for consistent surface finish The Rhombus 55° plate form and the 0° negative rake (free angle) create a robust cutting edge that resists chipping during interrupted cuts and heavy engagement. The 0.8 mm corner radius balances edge strength with the ability to deliver a consistent surface finish on turned components, making the insert suitable for a range of turning tasks from semi-finish to more demanding profiles. The insert’s geometry facilitates stable dimensional control and surface quality in rostfreier Stahl applications. Process integration and productivity benefits Designed for industrial turning environments, this indexable insert simplifies grade selection and setup through a clear designation and proven coating technology. The stable cutting behaviour enabled by the grade and chipbreaker reduces scrap and rework, so production cycles become more economical. Backed by Walter Tools expertise, the insert supports scalable manufacturing where reliable tool performance and predictable component quality are priorities. Contact Metav Werkzeuge for personalised application advice on Walter Tools turning inserts and to discuss selection for rostfreier Stahl — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DNMG150408-MU5-WMP20S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Designation: DNMG150408-MU5 WMP20S Brand: Walter Tools Grade: WMP20S Key dimensions Plate size: 15 Thickness code: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Features and applications Coating: Tiger·tec Silver Chipbreaker: MU5 Applicable material group: M (rostfreier Stahl) Execution: G Series: Tiger-tec Silver FAQ What materials is this insert suitable for? The DNMG150408-MU5 WMP20S insert is specified for rostfreier Stahl (material group M) and is optimised for the thermal and mechanical behaviour typical of stainless steels. Which coating does the insert have and what is its benefit? The insert features the Tiger·tec Silver coating, which enhances thermal resistance and edge stability, supporting longer tool life and consistent performance in demanding turning operations. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker promotes controlled chip formation and evacuation, improving process safety and reducing the risk of chip-related interruptions during turning with the DNMG150408-MU5 WMP20S. What edge geometry contributes to surface quality? The Rhombus 55° form combined with a 0° negative rake and a 0.8 mm corner radius offers a robust edge for interrupted cuts while enabling consistent surface finishes in medium to robust cutting conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names are used for clarification only; there is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
DNMG150408-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the MU5 chipbreaker for consistent, productive steel machining; order directly via Metav Werkzeuge or request tailored application advice from the consultants. DNMG150408-MU5 WPP05G turning insert — Tiger·tec Gold, Rhombic 55° (Walter Tools) DNMG150408-MU5 WPP05G is a rhombic turning insert designed for productive steel machining with a Tiger·tec Gold coated grade and an MU5 chipbreaker. Tiger·tec Gold coated grade WPP05G Optimised MU5 chipbreaker Rhombic 55° geometry 0.8 mm nose radius, 0° negative Consistent cutting performance for steel production The Tiger·tec Gold coating combined with the WPP05G grade delivers enhanced wear resistance and stable cutting-edge behaviour when machining steel (ISO group P). The MU5 chipbreaker is tuned for reliable chip control under typical steel cutting conditions, minimising interruptions and reducing the likelihood of built-up edge. This results in predictable tool life and fewer tool changes, which supports continuous production and predictable planning. Longer tool life and improved process efficiency A coated carbide grade like WPP05G is optimised to balance toughness and hardness, providing improved tool life in mixed steel applications. The Tiger·tec Gold technology reduces abrasive wear and helps preserve the cutting edge at elevated temperatures; as a consequence, cycle times remain steady and surface quality is maintained over longer tool life. These technical advantages translate into lower tooling consumption and better overall cost-efficiency for repetitive turning operations. Geometry that supports stable machining and surface quality The Rhombic 55° form and 0.8 mm corner radius with a 0° (negative) free angle create a cutting geometry suitable for a range of turning tasks where small corner radii and robust edge support are required. This geometry improves insert seating stability and allows confident cutting parameter selection for facing and light to medium turning. The coded thickness and form match standard toolholders, simplifying logistics and replacement routines for workshop teams. Application focus and practical handling advice Built for steel-oriented applications (designation P), this insert suits both unalloyed and alloyed steels where consistent chip formation and surface finish are priorities. The MU5 chipbreaker facilitates mid-range depths of cut with controlled chip fragmentation, reducing manual chip handling and downtime. For exact cutting data and optimisation in a specific production context, consult the technical advisors at Metav Werkzeuge to align feed and speed with the chosen insert and machine setup. For tailored cutting data, availability or to discuss the suitability of the DNMG150408-MU5 WPP05G Tiger·tec Gold insert for a specific steel application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists are available to assist with machining parameters and selection. Technical data SKU: DNMG150408-MU5-WPP05G-WALTER Designation: DNMG150408-MU5 WPP05G Product type: Turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Core specifications Corner radius: 0.8 mm Geometry: Rhombus 55° Free angle: 0° (negative) Plate size: 15 mm Thickness: 04 Tolerance class: M Special features Grade: WPP05G (Tiger·tec Gold coated carbide) Chipbreaker: MU5 Material application: Steel (P) Series: Tiger·tec Gold Execution: G Plate form: Rhombus 55° FAQ Which materials is this insert suited for? This insert is designed for steel (P) applications; the WPP05G grade and Tiger·tec Gold coating are optimised for unalloyed and alloyed steels. What benefit does the MU5 chipbreaker provide? The MU5 chipbreaker offers controlled chip formation and reliable evacuation during typical steel turning, reducing interruptions and supporting smoother operation with the DNMG150408-MU5 WPP05G insert. How does the Rhombic 55° geometry influence cutting? Rhombic 55° geometry gives a compact cutting edge and stable seating in the toolholder, which helps when facing and carrying out general turning where edge robustness and repeatability are required. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm nose radius balances surface finish improvement with edge strength; it supports good surface quality while maintaining a resistant cutting edge suitable for moderate cutting forces. Is this a coated carbide grade and what series does it belong to? Yes — the insert is a coated carbide grade WPP05G and belongs to the Tiger·tec Gold series from Walter Tools. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for clarification. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer (Walter Tools).
DNMG150408-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP10G grade for reliable, productive turning of steel components; consistent chip control and a robust edge preparation support stable cycle times. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. DNMG150408-MU5 WPP10G — Indexable turning insert, Tiger·tec Gold, Walter Tools The DNMG150408-MU5 WPP10G is a rhombic 55° indexable turning insert designed for general steel machining, offering controlled chip formation and long tool life. Tiger·tec Gold coated for extended tool life WPP10G grade for reliable steel cutting MU5 chipbreaker for controlled chip formation Rhombic 55° shape, 0.8 mm corner radius Consistent productivity for steel turning The insert delivers predictable performance in steel applications thanks to the WPP10G coated-carbide grade and the Tiger·tec Gold technology. This combination reduces flank wear under typical turning conditions, which helps to maintain consistent component tolerances over longer tool life. The data-driven selection of grade and coating targets the thermal and mechanical stresses encountered when machining steel (ISO P), so users benefit from fewer tool changes and improved machine uptime. The described attributes translate directly into measurable efficiency gains on production runs. Geometry and chip control that improve process stability A rhombic 55° form with a 0.8 mm corner radius and the MU5 chipbreaker provide a balance between robustness and surface finish. The geometry is suited to a range of turning operations where a stable cutting edge and effective chip segmentation are required. The negative rake 0° edge condition increases resistance to edge chipping in heavier cuts, while the chipbreaker promotes shorter, manageable chips. Together these features reduce secondary operations for chip disposal and help maintain a consistent surface quality on turned parts. Easy integration and application guidance for production use The insert is specified for standard toolholders and common turning set-ups, allowing straightforward integration into existing tool inventories. Its tolerance class M and standard form make replacement and inventory management simple. For complex material batches or mixed-process lines, technical advice on speeds, feeds and coolant strategies can optimise performance further; Metav Werkzeuge provides application support to align cutting data with shop-floor requirements. The combination of proven coating technology and a versatile chipbreaker supports repeatable results in serial production. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools inserts such as the DNMG150408-MU5 WPP10G and to request supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: DNMG150408-MU5-WPP10G-WALTER Designation: DNMG150408-MU5 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Core data Size: 15 Thickness: 04 Corner radius: 0.8 Relief angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MU5 Material suitability: Steel (ISO P) Application: General turning operations FAQ What materials is this insert intended for? The DNMG150408-MU5 WPP10G is designed primarily for steel (ISO P) applications; the WPP10G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation characteristics of steels. How does the MU5 chipbreaker affect cutting performance? The MU5 chipbreaker promotes short, controlled chips and improves chip evacuation; when used with the DNMG150408-MU5 WPP10G it contributes to stable cutting forces and consistent surface finish. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance and thermal stability of the cutting edge, extending productive tool life for the WPP10G grade under typical turning conditions. Is the rhombic 55° form suitable for shoulder and profile turning? Yes, the rhombic 55° geometry offers versatility for a range of turning tasks including shoulder work and profiling, while the 0.8 mm corner radius balances strength and edge definition. What does the negative 0° relief angle mean in practice? A negative 0° relief increases edge robustness for heavier cuts and intermittent machining; it helps prevent edge chipping when encountering variable material or interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer.
DNMG150408-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the MU5 chipbreaker for consistent chip control and extended tool life; the 0° negative rake and 0.8 mm nose radius provide stable cutting in steel turning. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. DNMG150408-MU5 WPP20G indexable turning insert (Tiger‑tec Gold) by Walter Tools — 0° negative rake, 0.8 mm nose radius The DNMG150408-MU5 WPP20G is an indexable turning insert engineered for ISO P (steel) applications, combining a robust coated-carbide grade with a geometry tuned for reliable chip formation in medium-to-heavy cutting. Tiger‑tec Gold coated for tool life Specifically for steel machining (ISO P) 0° negative rake for stable cutting 0.8 mm nose radius for reliable surface finish Consistent productivity through optimised coating and geometry The Tiger‑tec Gold coating and the coated-carbide substrate form a pairing that improves wear resistance and process stability during steel turning. This grade is aimed at achieving consistent results in series production, with the coating reducing flank wear and the substrate maintaining the cutting edge under thermal load. The insert’s geometry, featuring a 0° negative rake, supports stable cutting forces and reduces vibration, which helps maintain cycle times and lowers the risk of premature edge failure. Such a configuration benefits operations where repeatability and uptime are priorities. Controlled chips and better surface quality with MU5 The MU5 chipbreaker is designed to produce predictable chip forms when machining steel, assisting in evacuation and preventing tangling at moderate feeds. Combined with the 0.8 mm nose radius, the result is a balance between strength at the cutting edge and the ability to achieve a good surface finish without compromising durability. For operators unfamiliar with chipbreaker nomenclature: a dedicated chipbreaker modifies the flow of chips away from the cut zone, which reduces manual intervention and potential downtime caused by chip-related issues. Robust design for demanding turning tasks Rhombus 55° geometry and the DNMG form factor make the insert versatile for a range of turning operations, from roughing to light finishing when appropriate parameters are applied. The Rhombus 55° shape permits negative-rake mounting options that contribute to a stiffer tool assembly, improving accuracy under higher radial loads. The grade designation WPP20G signals a Walter Tools solution optimised for machining unalloyed and alloyed steels; this helps planners and process engineers select a tool that aligns with material-specific thermal and deformation characteristics. Practical compatibility and handling information The insert is supplied in the DNMG150408 format and is compatible with toolholders accepting DNMG geometry; thickness code 04 and the size designation 15 correspond to common industry standards for this type. The turning grade’s tolerance class M indicates manufacturing precision suitable for production environments. When integrating into existing setups, the combination of the MU5 chipbreaker and Tiger‑tec Gold technology typically reduces the need for frequent index changes, supporting longer operational intervals and simpler inventory planning. Contact Metav Werkzeuge for tailored cutting-data recommendations and to discuss tooling packages that include the DNMG150408-MU5 WPP20G from Walter Tools Technical Data Article number: DNMG150408-MU5-WPP20G-WALTER Designation: DNMG150408-MU5 Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Size designation: 15 Thickness code: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Insert shape: Rhombus 55° Chipbreaker: MU5 Material group: P (steel) Product type: indexable turning insert Application focus: steel machining (ISO P) FAQ What materials is this insert suitable for? The DNMG150408-MU5 WPP20G is specified for ISO P materials; the Walter Tools grade is optimised for unalloyed and alloyed steel machining. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this insert promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of chip-related interruptions. Can the insert be used for finishing operations? With appropriate feeds and cutting parameters, the DNMG150408-MU5 WPP20G can achieve satisfactory surface finishes thanks to the 0.8 mm nose radius, while maintaining edge robustness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
DNMG150408-MU5 WSM20S MU5 Wendeplatten - Walter Tools
Take advantage of the combination of high edge stability, reliable chip control and robust geometry for uninterrupted turning of demanding alloys; request technical cutting data or place an order via Metav Werkzeuge if additional guidance is required. DNMG150408-MU5 WSM20S turning insert, Tiger·tec Silver for stainless steels — Walter Tools The DNMG150408-MU5 WSM20S is a coated indexable insert engineered for stable metalcutting in rostfreiem Stahl and heat‑resistant superalloys, offering a robust chipbreaker and a neutral clearance for heavy and interrupted cuts. Tiger·tec Silver coating for edge stability Optimised MU5 chipbreaker for secure chip control 0° negative clearance for robust cutting Suitable for stainless steel and superalloys Greater productivity on tough-to-machine alloys The Tiger·tec Silver series with the WSM20S grade delivers a balance of wear resistance and thermal stability that reduces unscheduled tool changes. The coated carbide substrate and surface treatment improve edge life under the high temperatures typical when machining stainless steels and heat‑resistant alloys. In practice, this means longer periods between indexings and more predictable cycle times, which supports efficient throughput and lower per‑part tooling cost. The design targets turning operations where secure chip formation and sustained cutting forces are decisive for process reliability. Stable geometry for consistent surface quality The rhombic 55° format paired with a 0° negative clearance and a 0.8 mm corner radius provides mechanical strength at the cutting edge and resistance to chipping during heavier feed or interrupted cuts. The MU5 chipbreaker is optimised to form compact, controllable chips on demanding materials, reducing entanglement and improving surface finish. These geometric choices favour high metal removal rates while maintaining dimensional repeatability, making the insert suitable for both roughing and mixed finishing tasks where edge robustness is more important than minimal cutting forces. Practical integration and production benefits The DNMG form factor is widely supported by standard toolholders, enabling straightforward retrofitting into existing tool assemblies. With a clear tolerance class M and the Tiger·tec Silver coating, the insert supports reproducible tool setups and stable process windows. For production environments focused on rostfreiem Stahl and superalloys, the combination of a dependable chipbreaker and a coated grade designed for heat resistance helps to lower cycle interruptions and improve shopfloor uptime. For bespoke cutting parameters or verification of toolholder fitment, technical consultation is advised to match feeds, speeds and depth of cut to the specific workpiece and machine capability. For demanding stainless‑steel and superalloy turning applications, contact Metav Werkzeuge for tailored cutting data and supply of the Walter Tools DNMG150408-MU5 WSM20S; request technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DNMG150408-MU5-WSM20S-WALTER Article designation: DNMG150408-MU5 Series: Tiger·tec Silver Grade: WSM20S Brand: Walter Tools Facts Corner radius: 0.8 mm Plate size: 15 mm Thickness code: 04 Clearance angle: 0° (negative) Tolerance class: M Special features Coating/series: Tiger·tec Silver Grade description: WSM20S (coated carbide) Chipbreaker: MU5 Plate form: Rhombus 55° Material application: stainless steels, heat‑resistant superalloys and titanium (depending on geometry) Robust edge geometry for interrupted cuts FAQ What materials is this insert suitable for? The DNMG150408-MU5 WSM20S is formulated for stainless steels and, depending on geometry, for heat‑resistant superalloys and titanium, reflecting the WSM20S grade’s focus on thermal stability and edge durability. What is the benefit of the MU5 chipbreaker? The MU5 chipbreaker provides controlled, compact chip formation on demanding alloys, improving chip evacuation and reducing the risk of chip re‑cutting, which helps maintain surface quality and tool life with the WSM20S grade. What does a 0° negative clearance imply for machining? A 0° negative clearance gives the insert a more robust support of the cutting edge, which increases resistance to chipping and is advantageous in heavier or interrupted cuts where edge strength is prioritised. Can this insert be used for finishing operations? Yes; while the geometry favours robustness, the 0.8 mm corner radius and the coated grade allow for mixed roughing‑to‑finishing applications provided appropriate feeds and speeds are selected. Is the DNMG format compatible with standard toolholders? The DNMG designation corresponds to a common insert family; the DNMG150408‑form fits standard DNMG holders but verification of seat size and clamping style is recommended before assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanation only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
DNMG150408-MW5 WKK10S Wendeplatten - Walter Tools
Benefit from a combination of high productivity, reliable chip control and longer tool life thanks to the Tiger‑tec Silver coating and the wear‑resistant WKK10S grade; the robust 0.8 mm corner radius and MW5 chipbreaker deliver consistent performance in cast‑iron turning and help reduce machine downtime. Order directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150408-MW5 WKK10S indexable turning insert — Tiger‑tec Silver by Walter Tools A DNMG150408-MW5 WKK10S indexable turning insert optimised for productive machining of cast iron with a coated‑carbide grade and a rhombic 55° geometry. Tiger·tec Silver coating for extended life Designed specifically for cast iron (ISO K) Rhombic 55° shape for versatile turning Corner radius 0.8 mm for robust cutting edge Higher productivity with a coating tailored to cast iron The combination of Tiger‑tec Silver and the WKK10S grade creates a coated carbide cutting edge that resists abrasive wear common in cast‑iron applications. This engineered coating reduces flank wear and prolongs tool life, which translates into fewer tool changes and longer uninterrupted production cycles. For process planners, the clear benefit is a predictable tool lifetime and improved cost efficiency per workpiece, especially where chip breakage is frequent. Consistent chip control and process stability through geometry The rhombic 55° form combined with a negative rake 0° provides stable cutting forces and adaptability to a range of turning operations. The integrated MW5 chipbreaker is tuned for short, controlled chips typical of cast iron, lowering the risk of surface damage and improving swarf evacuation. With a 0.8 mm corner radius the insert delivers a robust edge capable of withstanding intermittent engagement, supporting reliable surface finish and repeatable results. Practical fitment and production advantages Tolerance class M and the standard DNMG seat ensure straightforward interchangeability with conventional toolholders, simplifying setup and reducing spindle downtime. The insert thickness and specified dimensions allow secure clamping and consistent positioning at the toolpost, which helps maintain cutting accuracy across batches. Backed by Walter Tools quality standards, this insert supports steady production rates and predictable maintenance intervals. For tailored advice on the DNMG150408-MW5 WKK10S from Walter Tools and to check current availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150408-MW5-WKK10S-WALTER Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Key specifications Plate size: 15 Plate thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Materials & features Series: Tiger‑tec Silver Grade: WKK10S (coated carbide) Chipbreaker: MW5 Execution: G Suitable for: cast iron (ISO K) Material code: K FAQ What materials is this insert designed for? The DNMG150408-MW5 WKK10S is designed primarily for cast iron (ISO K); the WKK10S grade and the Tiger‑tec Silver coating are tuned to resist abrasive wear typical of these materials. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker promotes the formation of short, controllable chips when turning cast iron, improving swarf removal and reducing the risk of workpiece surface damage. What are the advantages of the rhombic 55° shape? A rhombic 55° insert provides versatile approach angles for a variety of turning operations, enabling both roughing and finishing passes while maintaining stable cutting forces. Is the insert compatible with standard DNMG toolholders? Yes; the DNMG seat and tolerance class M ensure compatibility with conventional holders, allowing straightforward replacement and reliable clamping. What does the 0° negative rake mean in practice? A negative rake 0° means the insert presents a neutral to slightly negative cutting face, which increases edge strength and is beneficial for interruptions and harder cast‑iron conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the robust MW5 chipbreaker to increase process stability and tool life while machining steel; order directly via Metav Werkzeuge or contact the consultants for tailored cutting data and optimisation advice. DNMG150408-MW5 WPP10G turning insert — Walter Tools, Tiger·tec Gold coating for steel DNMG150408-MW5 WPP10G is a negative-geometry turning insert designed for general steel machining applications, combining Walter Tools' Tiger·tec Gold coating with a robust chipbreaker for consistent performance. Tiger·tec Gold coating for extended life Optimised chipbreaker MW5 for stable chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robust edge strength Maximise tool life with advanced coating technology The combination of Tiger·tec Gold technology and the WPP10G grade delivers a hard, wear-resistant surface that reduces flank and crater wear under the thermal loads typical of steel machining. This coated carbide formulation is engineered to withstand continuous cutting temperatures and abrasive conditions, resulting in fewer insert changes and longer uninterrupted production cycles. The result is a measurable improvement in uptime and a reduction in tooling costs per component when compared with uncoated grades. Reliable chip control and process stability for steel The MW5 chipbreaker is tuned for the typical chip formation of steels and promotes predictable, compact chip shapes. In practice, the chip former reduces the risk of long, tangled chips that interrupt machining and slow cycle times. Combined with the insert's negative 0° clearance, the geometry supports secure cutting edge engagement and vibration damping, which helps to maintain consistent cutting forces and improves dimensional repeatability in serial production. Geometry that balances versatility and edge strength The rhombic 55° shape enables a wide range of turning operations, from longitudinal turning to light profiling, while the 0.8 mm corner radius provides a resilient cutting edge that resists chipping during interrupted cuts. This balance between geometry and edge robustness supports stable surface finishes and reduces the likelihood of premature edge failure, making the insert a pragmatic choice for mixed-batch machining where tool reliability is essential. Practical production gains and application guidance Specified for the ISO P group, this grade is optimised for a broad range of steel alloys and cutting conditions: its wear characteristics favour medium to high cutting speeds and steady feed strategies. The insert is supplied in the standard DNMG form factor and integrates seamlessly into common toolholders. For best results, combine appropriate cutting parameters with coolant strategies suitable for steel to exploit the full potential of the Tiger·tec Gold surface treatment and the MW5 chip control. For process advice or to order Walter Tools Tiger·tec Gold inserts arranged for steel machining, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — for application-specific recommendations and rapid delivery options Technical data SKU: DNMG150408-MW5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150408-MW5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte ISO designation: DNMG150408-MW5 WPP10G Facts Insert size: 15 mm Thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MW5 Plate form: Rhombus 55° Execution: G Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The DNMG150408-MW5 WPP10G insert is designed primarily for steel (ISO P) applications and performs well across a broad range of unalloyed and alloyed steels. How does Tiger·tec Gold improve performance? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, extending service life and reducing changeover frequency under steel machining conditions. Which chipbreaker should be used for stable machining? The integrated MW5 chipbreaker is recommended for controlled chip formation in steel turning operations, promoting compact chips and consistent cutting forces. Is the insert suitable for interrupted cuts? Yes — the 0.8 mm corner radius and the negative-geometry execution contribute to edge robustness, improving resistance to chipping during interrupted or roughing cuts. What is the exact product designation to order? Order using the SKU DNMG150408-MW5-WPP10G-WALTER or the ISO designation DNMG150408-MW5 WPP10G to ensure the correct Tiger·tec Gold grade and MW5 chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-NMS WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver performance, a WSM01 grade for demanding materials and a robust NMS chipbreaker for consistently secure chip control; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150408-NMS WSM01 indexable turning insert by Walter Tools — Tiger‑tec Silver, for rostfreier Stahl and superalloys The DNMG150408-NMS WSM01 is an indexable turning insert engineered for heavy‑duty machining of rostfreier Stahl and heat‑resistant superalloys, offering a stable cutting edge and optimised chip formation for demanding turning operations. Tiger‑tec Silver coated cemented carbide For rostfreier Stahl and heat‑resistant alloys Negative rake 0° with 0.8 mm corner radius Rhombic 55° insert geometry, NMS chipbreaker High‑performance cutting for demanding materials The coated cemented carbide of the Tiger‑tec Silver series delivers a balance of wear resistance and thermal stability that supports extended tool life under high mechanical and thermal loads. As a grade, WSM01 is tailored to the challenges of machining rostfreier Stahl and ISO group S materials — where toughness and heat generation are critical factors. The negative 0° rake increases the insert’s mechanical strength, making the cutting edge more resistant to chipping during heavy cuts or interrupted turning, while the NMS chipbreaker promotes reliable chip control and reduces the risk of built‑up edge formation. Productivity gains through stable chip formation and longer tool life Stable chip formation and a robust cutting edge translate directly into measurable productivity benefits: fewer tool changes, reduced unplanned downtime and more consistent surface quality. The combination of the WSM01 grade and the NMS chipformer helps maintain a stable cutting edge when facing the stringy or work‑hardening behaviour typical of rostfreier Stahl, so machining cycles proceed more predictably. These characteristics make the insert suitable for series production and high‑throughput environments where repeatable performance is essential. Practical handling and machining advantages that support process security The rhombic 55° geometry and a corner radius of 0.8 mm give a compromise between edge strength and surface finish: the radius increases robustness for heavier depths of cut, while the insert form ensures favourable engagement angles for standard turning holders. The 0° negative relief supports interrupted cuts and provides dimensional stability in axial and radial engagement. Where ISO groups M and S are specified for workpiece materials, this insert offers a reliable choice to reduce the incidence of edge failure and to simplify insert selection for mixed production runs. Contact Metav Werkzeuge today to discuss how the DNMG150408-NMS WSM01 can be integrated into existing tool sets or to request application parameters tailored to specific rostfreier Stahl or superalloy grades Technical Data Article number: DNMG150408-NMS-WSM01-WALTER Designation: DNMG150408-NMS WSM01 Brand: Walter Tools Product type: indexable turning insert Core data Corner radius: 0.8 mm Geometry: Rhombic 55° Relief angle: 0° (negative) Insert size: 15 Thickness code: 04 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM01 (coated cemented carbide) Chipbreaker: NMS Suitable for: rostfreier Stahl (ISO group M); heat‑resistant superalloys and titanium (ISO group S) Application focus: heavy and difficult‑to‑cut materials, secure chip formation FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The DNMG150408‑NMS WSM01 is specifically produced for rostfreier Stahl (ISO group M) and offers a grade and chipformer optimised for the toughness and work‑hardening tendencies of these alloys. What does the WSM01 grade provide compared with standard grades? The WSM01 grade, part of the Tiger‑tec Silver family, is a coated cemented carbide designed for improved thermal and wear resistance in demanding turning applications, providing longer tool life and stable cutting edges on challenging materials. How does the NMS chipbreaker affect machining performance? The NMS chipbreaker promotes consistent chip control and reduces the risk of built‑up edge on materials like rostfreier Stahl and superalloys, improving surface finish and reducing interruptions for chip removal. Can the insert handle interrupted cuts or heavy depth of cut? Yes. The negative 0° relief and the 0.8 mm corner radius improve mechanical edge strength, making the insert more resilient during interrupted cuts and heavier engagement. What insert geometry is specified and what benefit does it bring? The rhombic 55° geometry provides a versatile engagement angle suitable for external turning operations, balancing accessibility with edge strength for a wide range of turning tasks. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are property of their respective owners. Brand names are stated for explanation and identification; there is no affiliation between our company and the named brands. The offered article is original and factory‑new.
DNMG150408-NMS WSM10 WSM10 Wendeplatten - Walter Tools
High-performance WSM10 grade combined with a rhombic 55° geometry and an NMS chipbreaker delivers reliable edge life and predictable chip control for demanding turning tasks; take advantage of this durability and process stability by ordering the DNMG150408-NMS WSM10 insert directly via Metav Werkzeuge or asking the consultants for application advice. DNMG150408-NMS WSM10 Turning Indexable Insert – Rhombic 55°, NMS chipbreaker (Walter Tools) The DNMG150408-NMS WSM10 is a turning indexable insert engineered for secure chip formation and stable cutting when machining rostfreier Stahl and heat-resistant superalloys in production environments. WSM10 grade for heat-resistant alloys Rhombic 55° form for flexible toolpaths 0° negative rake for robust cutting action NMS chipbreaker for controlled swarf Reliable performance on rostfreier Stahl and superalloys The WSM10 cutting grade is a coated cemented carbide formulation tailored for materials with poor thermal conductivity and high work-hardening tendency. This makes the insert particularly suitable for machining rostfreier Stahl and heat-resistant nickel-based alloys where thermal load and edge stress are high. The combination of grade and coating supports stable chip formation and reduces the risk of build-up on the cutting edge, which in turn improves process reliability and extends in-service periods between indexings. For operations that require consistent surface quality, this grade provides a balance between wear resistance and fracture toughness. Geometry that supports versatile turning strategies The rhombic 55° plate form gives a versatile approach angle, permitting both light finishing passes and medium roughing cuts with good access to shoulders and bores. The insert’s 0° negative rake increases cutting-edge strength for interrupted cuts and heavy engagement, while the 0.8 mm corner radius helps to achieve a stable cutting line and improved tool life under variable feed conditions. The NMS chipbreaker is designed to shape chips efficiently across the intended material groups, reducing the need for secondary chip management and supporting safe operation at elevated cutting forces. Process efficiency and shop-floor advantages Adopting inserts with this specification can help to standardise machining parameters across components that share material classes S and M. The stable edge behaviour reduces scrap risk and supports predictable cycle times, contributing to higher throughput and lower rework rates. From a practical standpoint, the code and form factor facilitate quick index changes and simple tool inventory management. Where coolant and toolpath strategy permit, the insert’s characteristics allow a focused optimisation of speeds and feeds to reduce total machining cost per part while maintaining surface integrity. Application guidance and technical support The insert is intended for turning applications on materials classified as group M (rostfreier Stahl) and group S (heat-resistant superalloys and titanium), reflecting its emphasis on thermal and chipping resistance. For selection between finishing and roughing set-ups, combine the insert geometry with a tooling holder that supports the required lead angle and clamping rigidity. If further optimisation is needed for a specific alloy or component geometry, Metav Werkzeuge provides technical consultation and cutting data guidance by e-mail or phone: info@metav-werkzeuge.com, +49 2822 7131930. Practical adjustment of feed and depth of cut will often yield the best balance between surface finish and tool life. Contact Metav Werkzeuge for tailored application support on Walter Tools turning inserts and request expert recommendations for the DNMG150408-NMS WSM10 for specific rostfreier Stahl or superalloy jobs Technical Data Article number / SKU: DNMG150408-NMS-WSM10-WALTER Designation: DNMG150408-NMS WSM10 Product type: Turning indexable insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Grade series: Walter Schneidstoffsorte - Serie offen Facts Insert form: Rhombus 55° Rake angle: 0° (negative) Corner radius: 0.8 mm Size code: 15 Thickness code: 04 Tolerance class: M Applications & Features Coated cemented carbide grade WSM10 Chipbreaker: NMS Material groups: S / M (heat-resistant superalloys, titanium; rostfreier Stahl) Suited for interrupted cuts and demanding thermal loads FAQ What materials is this insert designed for? The DNMG150408-NMS WSM10 insert is intended for machining materials in groups M and S; this includes rostfreier Stahl and heat‑resistant superalloys, where the WSM10 grade supports secure chip formation and edge stability. How does the NMS chipbreaker affect machining? The NMS chipbreaker shapes and breaks chips reliably during turning, which reduces swarf handling, lowers the chance of chip re-cutting and contributes to a steady surface finish when using the DNMG150408‑NMS insert. Is the insert suitable for interrupted cuts? Yes, the 0° negative rake and the robust geometry of this indexable insert provide enhanced edge strength, making it appropriate for interrupted turning applications and heavy engagements. What toolholder considerations improve performance? A rigid clamping system with accurate seat support and the correct lead angle for a rhombic 55° insert will enhance stability and repeatability; combine this with appropriate cooling and chip evacuation for best results with the WSM10 grade. Can this insert be used for both roughing and finishing? The rhombic 55° geometry and the 0.8 mm corner radius offer versatility that suits light finishing and medium roughing passes; final parameters depend on material, part geometry and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product of the manufacturer.
DNMG150408-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM10S grade for consistent, heat-resistant performance when machining stainless steel and high-temperature alloys; the negative 0° relief and NMS chipbreaker ensure secure chip control and stable cutting edges. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150408-NMS WSM10S turning insert — Rhombic 55°, 0.8 mm nose radius (Walter Tools) The DNMG150408-NMS WSM10S is a negative Rhombic 55° turning insert engineered for secure cutting of stainless steel and heat-resistant superalloys in demanding turning operations. Tiger·tec Silver coating for heat resistance WSM10S grade for stable cutting edges Rhombic 55° insert with 0.8 mm nose radius NMS chipbreaker for secure chip control Reliable machining of stainless steel and superalloys The combination of the WSM10S coated carbide grade and Tiger·tec Silver technology provides enhanced thermal stability and improved wear resistance, specifically developed for machining stainless steel and high-temperature alloys. This translates into fewer unexpected edge failures and longer tool life under heavy cutting conditions. The design supports stable chip formation, reducing the risk of built-up edge on difficult-to-machine materials and enabling more predictable cycle times in production. Geometry that delivers repeatable surface quality The Rhombic 55° form with a 0.8 mm nose radius and negative 0° relief ensures a robust cutting edge and consistent contact geometry. The NMS chipbreaker guides chips away from the cutting zone to maintain process security and surface finish without compromising edge strength. For operations where repeatability and part tolerances matter, this insert helps achieve reliable surface quality and dimensional stability across batches. Process efficiency and practical benefits on the shop floor Using a purpose-designed insert such as this reduces downtime through fewer tool changes and improved edge life, creating measurable gains in productivity. The WSM10S grade balances wear resistance and edge toughness, which is particularly beneficial when switching between stainless steel and other heat-resistant materials. Specification-led selection of insert geometry and chip control reduces scrap rates and contributes to a more economical turning process overall. Application guidance and service support For roughing and finishing strategies in diverse turning tasks, the insert's combination of coating and chipbreaker enables flexible parameter windows: operators can favour higher cutting speeds for shorter cycles or conservative feeds for extended tool life. If clarification is required on suitability for a specific alloy or machine condition, Metav Werkzeuge provides technical advice and cutting data recommendations to help integrate the insert into existing processes. For tailored recommendations on the Walter Tools DNMG150408-NMS WSM10S turning insert and to discuss optimised cutting data for stainless steel, contact Metav Werkzeuge for expert guidance and order assistance. Technical data Article number: DNMG150408-NMS-WSM10S-WALTER Label: Drehwendeschneidplatte DNMG150408-NMS WSM10S Walter Tools Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Tolerance class: M Execution: G Core dimensions Insert size: 15 mm Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Insert shape: Rhombus 55° Special features Coating: Tiger·tec Silver Chipbreaker: NMS Materials: S / M (suitable for heat-resistant superalloys and stainless steels) Application focus: Heavy-duty turning, secure chip control, stable cutting edge FAQ What materials is this insert suited for? The DNMG150408-NMS WSM10S insert (Walter Tools) is designed for stainless steels and heat-resistant superalloys (ISO groups M and S), offering thermal stability and secure chip formation. Can this insert be used for finishing operations? Yes, the combination of a 0.8 mm nose radius and the NMS chipbreaker supports good surface quality in finishing, while the Tiger·tec Silver coating helps maintain edge integrity. How does the NMS chipbreaker affect machining? The NMS chipbreaker promotes controlled chip evacuation and reduces the likelihood of built-up edge, improving process reliability for both continuous and interrupted cuts. Is the WSM10S grade suitable for high cutting speeds? WSM10S, together with the Tiger·tec Silver coating, is formulated to withstand elevated temperatures, allowing productivity gains through increased cutting speeds where machine and workpiece conditions permit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-NMS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust negative rake for secure chip control and long edge life; the result is reliable machining of stainless steels and heat‑resistant superalloys with consistent surface quality. Order the DNMG150408‑NMS WSM20S turning insert directly via Metav Werkzeuge or contact our consultants for tailored machining advice. DNMG150408‑NMS WSM20S indexable turning insert – Tiger·tec Silver, for stainless steel and superalloys | Walter Tools A DNMG150408‑NMS WSM20S indexable turning insert engineered for productive turning of rostfreie Stähle and high‑temperature alloys, combining a tough negative rake and a stable corner geometry for demanding roughing and semi‑finishing tasks Tiger·tec Silver coated grade WSM20S Optimised for stainless steel and superalloys Rhombic 55° geometry, DNMG 15 size 0.8 mm corner radius, 0° negative rake Productivity and predictable chip control for difficult materials The combination of the Tiger·tec Silver coating and the WSM20S grade delivers a coated‑carbide solution that supports stable chip formation when machining challenging alloys. Designed specifically for rostfreie Stähle (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), the insert gives a wider process window and reduced risk of built‑up edge. This translates into fewer interruptions on the shop floor and a measurable improvement in cutting‑edge life, helping to maintain consistent cycle times in series production. Geometry that protects the edge and improves surface quality A rhombic 55° geometry with a 0.8 mm corner radius and 0° negative rake produces a robust cutting edge that tolerates interrupted cuts and higher radial depths. The DNMG format provides a practical compromise between edge strength and access to features, resulting in reliable dimensional repeatability and improved surface finish compared with more fragile geometries. The chipbreaker design supports controlled chip flow, reducing workpiece rework and increasing first‑pass yields. Shop‑floor advantages: fewer tool changes, steadier processes Using this insert supports greater process stability and lower tooling consumption through longer edge life and consistent machining behaviour. The coated grade reduces thermal and abrasive wear during heavy engagement, while the negative rake improves resistance to mechanical shock. These characteristics combine to lower tooling overheads and reduce non‑productive time, making the insert a suitable choice for production environments where predictability and throughput are priorities. Practical application guidance without over‑specification The insert is intended for both heavy and interrupted turning applications in rostfreie Stähle and superalloys where tool life and edge stability are critical. Choose cutting parameters that favour steady chip evacuation and, where applicable, use coolant strategies aligned with the workpiece material. The geometry and coating are optimised for demanding materials; the component will benefit from stable fixturing and consistent tool‑to‑work alignment to fully realise the grade’s performance advantages. Contact Metav Werkzeuge today for a machining appraisal or to request a supply recommendation for the Walter Tools DNMG150408‑NMS WSM20S turning insert Technical data Article number: DNMG150408‑NMS‑WSM20S‑WALTER Product label: Drehwendeschneidplatte DNMG150408‑NMS WSM20S Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Grade series: Tiger·tec Silver Grade: WSM20S ISO designation: DNMG150408‑NMS Facts Insert shape: Rhombus 55° Size designation: 15 Thickness: 04 Corner radius: 0.8 mm Free angle / rake: 0° (negative) Chipbreaker: NMS Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Material groups: stainless steel (M), heat‑resistant superalloys / titanium (S) Application: heavy and interrupted turning, semi‑finishing Robust geometry for improved edge life Stable chip formation and controlled chip flow FAQ What materials is the DNMG150408‑NMS WSM20S best suited for? The DNMG150408‑NMS WSM20S insert is formulated for rostfreie Stähle (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), providing thermal and mechanical resistance for these demanding materials. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WSM20S grade improves wear resistance and heat management, which contributes to stable chip formation and extended cutting‑edge life under heavy cutting conditions. What advantages does the rhombic 55° geometry provide? The rhombic 55° shape delivers a balance of accessibility and strength; combined with a 0.8 mm corner radius and negative rake, it enhances edge robustness and supports consistent surface quality during interrupted cuts. Is this insert suitable for roughing and semi‑finishing? Yes, the insert’s robust geometry and coated grade make it appropriate for both roughing operations that demand high edge stability and semi‑finishing where surface integrity matters. Which chipbreaker is fitted and what is its effect? The insert is supplied with the NMS chipbreaker, engineered to promote controlled chip flow and reduce the likelihood of erratic chips that can affect surface finish and tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer.
DNMG150408-NMT WS10 WS10 Wendeplatten - Walter Tools
Benefit from controlled chip formation and the WS10 coated carbide combined with a 55° rhombic geometry for steady, productive turning. The robust NMT chipbreaker and a 0.8 mm corner radius deliver reliable edge stability and repeatable part quality. Order the DNMG150408-NMT WS10 directly via Metav Werkzeuge or ask our consultants if needed DNMG150408-NMT WS10 – Rhombic 55° turning insert with NMT chipbreaker (Walter Tools) The DNMG150408-NMT WS10 is a negative‑rake, rhombic turning insert engineered for stable chip control and versatile finishing operations in production turning Coated carbide grade WS10 for consistent edge life NMT chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning 0.8 mm corner radius for accurate profile control Stable chip control increases machining uptime The combination of the NMT chipbreaker and the WS10 coated carbide results in dependable chip geometry that reduces process interruptions. This cutting‑edge arrangement helps to avoid long, stringy chips that can foul tools or workpieces, which in turn supports longer tool life and fewer interruptions on the shop floor. The design is aimed at productive turning tasks where consistent chip evacuation and repeatable results are priorities, favouring throughput and predictable tool‑change intervals. Geometry and edge design for precise, robust turning A rhombic 55° insert shape with a 0° negative rake provides a robust cutting edge suited to a wide range of general turning operations. The modest 0.8 mm corner radius improves profile control and contributes to an even wear pattern, while the compact plate dimensions support accurate edge engagement and accessibility in confined toolholders. Negative rake geometry increases edge strength for interrupted cuts and heavy depth‑of‑cut situations, translating into increased process reliability and fewer run‑offs. Selection advice and application scope for reliable results Material suitability for this insert is determined by the product matrix; the grade requires consultation of technical specifications to ensure optimal match with the workpiece material. For practical selection, pair the insert’s coated carbide properties with appropriate cutting parameters and holder rigidity to unlock the best surface finish and tool life. For tailored recommendations, a process review will clarify whether this variant matches the machining case and whether a different grade or geometry could provide higher productivity or improved finish. Choose Walter Tools' WS10 DNMG150408-NMT when consistent chip control and robust edge life are required; contact Metav Werkzeuge for matched tooling recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150408-NMT-WS10-WALTER SKU: DNMG150408-NMT-WS10-WALTER Designation: DNMG150408-NMT WS10 Product type: Drehwendeschneidplatte / turning insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WS10 Facts Inscribed circle: 15 mm Thickness: 4 mm Corner radius: 0.8 mm Geometry: Rhombus 55° Rake angle: 0° (negative) Tolerance class: M Special features Coating/material: beschichtetes Hartmetall (WS10) Chipbreaker: NMT Execution: G Plate form: Rhombus 55° Size designation: 15/04/08 Material information: Katalogabhängig FAQ What applications is this insert suited for? This insert is designed for general turning tasks where controlled chip formation and edge robustness are required; its geometry and WS10 grade favour productive finishing and medium‑duty roughing operations. How does the NMT chipbreaker influence machining? The NMT chipbreaker produces short, segmented chips and enhances evacuation, which helps maintain steady cycle times and reduces the likelihood of chip‑related stoppages when using the DNMG150408-NMT WS10. What does the DNMG150408 code indicate? The code reflects the insert geometry and key dimensions: rhombic 55° shape, 15 mm inscribed circle and 0.8 mm corner radius, with a 4 mm thickness—useful when matching inserts to toolholders. Is the WS10 grade suitable for all materials? Material compatibility must be verified against the product matrix; WS10 is a coated carbide grade that offers broad performance, but the concrete suitability depends on the specific workpiece material and machining conditions. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com