DNMG150404-MP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP5 chipbreaker for stable, productive steel turning; the rhombic 55° geometry with a 0.4 mm corner radius delivers consistent surface quality and long tool life. Order the insert directly via Metav Werkzeuge or contact the sales team for application support. DNMG150404-MP5 WPP20G indexable turning insert, rhombus 55° for steel — Walter Tools DNMG150404-MP5 WPP20G is a coated indexable insert for general steel turning, designed for robust chip control and extended wear resistance Tiger·tec Gold coating for high wear resistance MP5 chipbreaker optimised for steel turning Rhombic 55° shape for versatile turning geometries 0° negative rake for robust cutting stability High productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade targets high process reliability when machining steel. The coating reduces friction and heat at the cutting edge, which leads to longer intervals between index changes and more consistent part quality. The specified grade balances wear resistance and toughness, meaning fewer interruptions for tool changes in mixed production runs. This performance-oriented pairing supports efficient chip evacuation and stable cutting forces under typical turning conditions. Reliable chip control for repeatable surface finish Equipped with the MP5 chipbreaker, the insert generates predictable chip forms when cutting steels as classified under ISO P. The chipbreaker geometry reduces the likelihood of long, stringy chips and supports controlled breaking even at varying depths of cut. As a result, machine downtime related to chip entanglement is reduced and surface finish repeatability improves. The rhombic 55° shape also aids in accessing different turning angles while maintaining a small 0.4 mm corner radius for fine detail work. Robust geometry for stable machining The negative 0° rake and the insert’s sturdy form provide mechanical strength at the cutting edge, increasing resistance to crater wear and thermal shocks during interrupted cuts. The rhombic format allows flexible mounting orientations and efficient use of the insert index positions, while the 0.4 mm corner radius helps preserve edge integrity under higher cutting loads. For production environments where stability and predictable tool life are prioritised, this insert presents a balanced solution between edge strength and fine finishing capability. For application advice or to arrange a delivery of Walter Tools DNMG150404-MP5 WPP20G inserts, please contact Metav Werkzeuge directly — the Metav sales team can provide cutting data and machining recommendations to match specific steel grades Technical Data Article number: DNMG150404-MP5-WPP20G-WALTER Designation: DNMG150404-MP5 WPP20G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Plate size: 15 Corner radius: 0.4 mm Plate form: Rhombus 55° Free angle: 0° (negative) Chipbreaker: MP5 Tolerance class: M Plate thickness: 04 Special features Coating / series: Tiger·tec Gold Grade: WPP20G (coated cemented carbide) Application group: Steel (ISO P) Robust negative rake design for stability Optimised chip control for general turning operations FAQ What materials is this insert suitable for? The DNMG150404-MP5 WPP20G insert is specified for steel machining (ISO P); the grade and chipbreaker are optimised for unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP20G grade reduces friction and improves wear resistance, which helps extend the insert life and maintain consistent surface quality during extended runs. What is the purpose of the MP5 chipbreaker? The MP5 chipbreaker provides controlled chip formation when turning steel, lowering the risk of entangling chips and supporting stable machining conditions for repeatable finishes. Can this insert handle interrupted cuts? Yes — the negative 0° rake and robust geometry of the DNMG150404-MP5 insert enhance edge strength and resistance to shock, making it suitable for interrupted turning operations on steel. How should cutting data be selected for this grade? Cutting data should be chosen based on the specific steel grade and machining conditions; Metav Werkzeuge can supply recommended speeds, feeds and depths of cut for the WPP20G grade and MP5 chipbreaker. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-MP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP5 chipbreaker for dependable performance in steel turning; the rhombic 55° geometry with a 0.4 mm corner radius delivers consistent edge life and secure clamping. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG150404-MP5 WPP30G – Rhombic 55° turning insert for Stahl, Tiger·tec Gold by Walter Tools The DNMG150404-MP5 WPP30G is a rhombic 55° turning insert engineered for general-purpose Stahl turning, combining Tiger·tec Gold coating with an MP5 chipbreaker to support productive, stable material removal. Tiger·tec Gold coating for extended tool life MP5 chipbreaker for consistent chip control Rhombic 55° geometry, 0.4 mm corner radius Negative 0° rake angle for rigid turning Predictable edge life for continuous production The Tiger·tec Gold coating paired with a coated carbide substrate provides a balanced wear resistance and toughness profile, which translates into predictable edge life during sustained turning of Stahl. This coating technology reduces flank and crater wear under typical steel cutting temperatures, so machining intervals become more systematic and planning is simplified. The result is fewer unexpected tool changes and a smoother production rhythm, improving overall process efficiency. Reliable chip control that reduces interruptions Equipped with the MP5 chipbreaker, the insert shapes and controls chips reliably in common turning operations on Stahl, lowering the risk of entanglement and surface damage. Good chip formation reduces manual intervention and helps maintain cycle times, especially in longer runs. For operators less familiar with chipbreaker design, the MP5 profile is a versatile choice that balances fragmentation and evacuation without the need for constant parameter tinkering. Geometry that supports accuracy and surface finish The rhombic 55° geometry and 0.4 mm corner radius create a stable cutting edge suited to a wide range of feeds and depths of cut. The negative 0° rake orientation enhances rigidity and is advantageous when higher clamping forces are required or when machining interrupted cuts. Together these features promote consistent workpiece tolerances and a reliable surface quality with fewer rework cycles, making the insert a practical option for mixed-production environments. Application guidance and tool pairing This insert is intended primarily for turning Stahl and performs well in medium-duty general turning. Selection of appropriate cutting parameters—cutting speed, feed and depth—will depend on the specific grade of Stahl and machine capability; modest cutting speeds and stable feed settings are a good starting point. Pairing with a suitable DNMG toolholder that secures the rhombic geometry and supports the insert seat will ensure optimal contact and transfer of forces, preserving the insert’s edge and maintaining repeatable results. Contact Metav Werkzeuge for tailored recommendations on using the DNMG150404-MP5 WPP30G by Walter Tools in specific Stahl applications or to request matching toolholders and cutting data Technical Data Article number: DNMG150404-MP5-WPP30G-WALTER Designation: DNMG150404-MP5 WPP30G Series: Tiger·tec Gold Grade: WPP30G Core data Geometry: Rhombic 55° Corner radius: 0.4 mm Plate size: 15 Thickness: 04 Rake angle: 0° (negative) Chipbreaker: MP5 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Material application: Stahl Series description: Coated carbide grade optimised for Stahl Application focus: General-purpose turning with good wear resistance FAQ What materials is this insert suitable for? The DNMG150404-MP5 WPP30G from Walter Tools is designed for machining Stahl, optimised for typical steel heat and chip-formation behaviour. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on the DNMG150404-MP5 WPP30G promotes consistent chip formation and evacuation, reducing the need for manual chip control during turning of Stahl. Is the rhombic 55° geometry suitable for interrupted cuts? Yes — the rhombic 55° form combined with a negative 0° rake provides increased cutting-edge support, making the insert robust under interrupted cutting conditions. What benefits does Tiger·tec Gold provide in daily use? Tiger·tec Gold coating on the DNMG150404-MP5 WPP30G enhances wear resistance and thermal stability, contributing to longer, more predictable tool life in Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of high thermal resilience, stable chip control and a robust cutting edge for consistent production results; the Tiger‑tec Silver WSM01 grade and MS3 chipbreaker together reduce downtime and support reliable machining of stainless and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. DNMG150404-MS3 WSM01 turning insert — Tiger‑tec Silver grade, MS3 chipbreaker (Walter Tools) DNMG150404-MS3 WSM01 is a turning insert designed for machining stainless steels and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver coated carbide grade WSM01 MS3 chipbreaker for secure chip control Rhombic 55° shape for versatile turning Designed for stainless steels and superalloys Proven performance for stainless and superalloy turning The WSM01 cutter grade, part of the Tiger‑tec Silver series, is formulated for materials that generate heat and promote built‑up edge, notably stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S). Its microstructure and coating combination improve thermal resistance and promote stable chip formation, which reduces the tendency for edge deterioration. For production planning this translates into longer in‑process intervals and a lower rate of interrupted cycles, supporting higher overall equipment effectiveness. Reliable chip control and tool life through MS3 geometry The MS3 chipbreaker is engineered to control chips across a range of depths of cut, producing short, manageable chips even when cutting tough alloys. Combined with the Rhombic 55° geometry and a 0.4 mm corner radius, the insert provides a balance between strength and surface finish. A 0° relief angle (negative rake) enhances cutting edge robustness under heavier cuts, making the design particularly suitable where tool edge stability is critical rather than razor‑fine finishing. Practical fitment, tolerances and production benefits The insert designation DNMG150404‑MS3 indicates an inscribed circle of 15 mm, a plate thickness code of 04 and the specified MS3 chipbreaker, simplifying tool selection and inventory management. Tolerance class M ensures dimensional consistency for repeatable clamping in standard toolholders. Deploying this insert can reduce scrap from built‑up edge and maintain consistent component geometry, while the standardised form factor supports quick replacements and predictable machining parameters. For tailored recommendations on integrating Walter Tools’ Tiger‑tec Silver WSM01 inserts into specific machining processes, contact Metav Werkzeuge for expert application advice and fast supply Technical data Article number: DNMG150404-MS3-WSM01-WALTER Product type: Turning insert Designation: DNMG150404-MS3 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Corner radius: 0.4 mm Inscribed circle: 15 mm Plate thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WSM01 Chipbreaker: MS3 Shape: Rhombic 55° Material groups: S / M Suitable for: stainless steels (ISO M), heat‑resistant superalloys (ISO S) FAQ Which materials is this insert best suited for? The WSM01 grade is optimised for stainless steels (ISO M) and heat‑resistant superalloys (ISO S); the Tiger‑tec Silver formulation supports stable cutting in these demanding materials. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker promotes short, controlled chips across a range of cutting depths, improving chip evacuation and reducing the risk of entanglement or recutting. What does the DNMG150404 designation indicate? DNMG150404 denotes a Rhombic 55° insert with a 15 mm inscribed circle and a plate thickness coded as 04, matching common toolholder standards for turning operations. Is the negative rake suitable for finishing cuts? A 0° (negative) relief provides a robust cutting edge ideal for heavier or interrupted cuts; for fine finishing, consider matching cutting parameters or a smaller corner radius to achieve the required surface quality. Can this insert be used in standard toolholders? Yes — the DNMG format and tolerance class M ensure compatibility with established turning toolholders that accept DNMG‑style inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150404-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the high thermal stability and robust edge life of the Tiger·tec Silver grade combined with a compact Rhombic 55° geometry and MS3 chipbreaker for reliable machining of stainless and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for machining parameters and tooling setups. DNMG150404-MS3 WSM10S indexable turning insert — Tiger·tec Silver for superalloys and stainless steel | Walter Tools The DNMG150404-MS3 WSM10S is an indexable turning insert designed for turning demanding materials such as stainless steels and heat‑resistant superalloys in industrial CNC turning applications. Tiger·tec Silver coating for thermal stability WSM10S grade optimised for superalloys and stainless Rhombic 55° insert shape for versatile turning 0.4 mm corner radius with MS3 chipbreaker High thermal stability and wear resistance for tough materials The combination of the Tiger·tec Silver coating and the WSM10S carbide grade delivers increased resistance to heat and abrasive wear when machining difficult alloys. This composition supports stable cutting edges under elevated temperatures and reduces the tendency for built‑up edge formation when processing stainless steel and superalloys; the result is improved tool life and more predictable tool changes. For production planners, the coated grade translates into higher process security and fewer unplanned stops, while operators benefit from a more consistent surface finish and repeatable cycle times. The coating also helps to maintain edge integrity at moderate to high cutting speeds. Geometry and chip control that improve surface quality and cycle time The Rhombic 55° outline combined with a 0.4 mm corner radius and the MS3 chipbreaker provides a balance between edge strength and cutting-line access. The negative 0° (negative) rake angle increases edge robustness for interrupted cuts and heavy engagement, while the MS3 chip control geometry produces short, controllable chips for turning operations. Together these features enable reliable finishing and semi‑finishing passes, reducing the need for secondary operations. The geometry is suitable for versatile turning tasks on CNC lathes, where repeatable dimensional control and consistent surface integrity are required. Practical integration into production and tool programmes As an indexable turning insert, this item suits medium to high‑duty turning cycles in the aerospace, energy and high‑performance engineering sectors where heat‑resistant alloys and rostfreie Stähle are common. The insert’s compact plate format and tolerance class M support accurate seat fit and repeatability in turret systems; predictable chip behaviour and prolonged edge life contribute to lower overall tooling costs per part. For toolroom engineers, the clear specification of grade, chipbreaker and geometry simplifies insert selection for specific operations, enabling straightforward optimisation of feed and speed while maintaining component quality. Contact Metav Werkzeuge for tailored cutting data and to specify Walter Tools Tiger·tec Silver inserts for the intended application; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: DNMG150404-MS3-WSM10S-WALTER Article designation: DNMG150404-MS3 WSM10S Brand: Walter Tools Series: Tiger·tec Silver Core data Insert size: 15 Plate thickness: 04 Corner radius: 0,4 Free cutting angle: 0° (negativ) Geometry: Rhombus 55° Tolerance class: M Features Chipbreaker: MS3 Grade: WSM10S (coated carbide) Product type: indexable turning insert Execution: G Material suitability: S / M Applicable for: rostfreier Stahl FAQ What materials is this insert suited for? The DNMG150404-MS3 WSM10S insert is designed for machining stainless steel (ISO group M) and heat‑resistant superalloys/titanium alloys (ISO group S) thanks to the WSM10S grade and Tiger·tec Silver coating. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker produces short, controllable chips and supports consistent surface quality; it is optimised for turning operations where chip control and reliable evacuation are essential. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm corner radius provides a good compromise between edge strength and the ability to achieve fine surface finishes; it helps to reduce edge chipping on intermittent cuts and improves dimensional stability. Is the insert suitable for heavy interrupted cuts? The insert’s negative 0° rake and robust grade make it well suited to heavier engagements and interrupted turning, offering enhanced edge strength and process security. Which insert designation should be specified when ordering? Specify the full designation: DNMG150404-MS3 WSM10S (Walter Tools) to ensure the correct grade, chipbreaker and geometry are supplied. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Deutschland The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mark names and protected designations are mentioned for explanation only. There is no connection between our company and the mentioned brands beyond the sale of original, factory‑new items from the manufacturers.
DNMG150404-NFT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the WSM20S grade and the Tiger‑tec Silver coating to achieve stable chip formation and longer tool life when machining tough alloys; order the insert directly via Metav Werkzeuge or contact our consultants for application support. DNMG150404‑NFT WSM20S indexable turning insert by Walter Tools — Tiger‑tec Silver, negative rake 0° The DNMG150404‑NFT WSM20S is a rhombic 55° indexable turnÂing insert designed for demanding work on stainless steels and heat‑resistant superalloys, offering a robust chipbreaker geometry for secure cutting. Tiger‑tec Silver coating for thermal resistance WSM20S grade for stainless and superalloys Rhombic 55° form with 0.4 mm corner radius Negative relief angle 0° for heavy cuts High stability and consistent chip control for demanding materials This insert’s combination of Tiger‑tec Silver coating and the WSM20S grade delivers improved thermal resistance and edge stability when machining stainless steel and heat‑resistant alloys. The NFT chipbreaker is engineered to promote stable chip formation, reducing the risk of built‑up edge and minimising process interruptions. For operations where consistent surface finish and predictable tool life are critical, the coated carbide chemistry and tailored geometry reduce wear rates and help secure repeatable results. Geometry and design that increase productivity and reduce setup time The rhombic 55° shape with a 0.4 mm corner radius and a negative relief angle (0°) allows for robust engagement in turning applications, especially where interrupted cuts or heavy machining are present. The insert form supports versatile approach angles while maintaining a reliable cutting edge, which can shorten cycle times and lower the frequency of tool changes. By selecting a dedicated grade and chipbreaker, production planners gain measurable advantages in throughput and process reliability. Application guidance and practical advantages on the shop floor Specified for workpiece groups S and M (heat‑resistant superalloys/titanium and stainless steel), the insert performs where heat generation and material toughness challenge conventional grades. In practice, this means fewer rejects, improved edge retention and more predictable maintenance intervals. When paired with appropriate cutting data and a stable clamping system, the insert contributes to lower overall machining costs through longer cutting lengths per edge and reduced regrinding needs. Contact Metav Werkzeuge for tailored cutting data and ordering support on Walter Tools turning inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DNMG150404-NFT-WSM20S-WALTER Product type: Turning indexable insert Designation: DNMG150404-NFT WSM20S Manufacturer: Walter Tools Facts Shape: Rhombic 55° Inscribed circle/size: 15 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Special features Coating: Tiger‑tec Silver Grade: WSM20S Chipbreaker: NFT Series: Tiger‑tec Silver Tolerance class: M Material suitability: S / M (superalloys/titanium and stainless steel) FAQ What materials is this insert suitable for? The DNMG150404‑NFT WSM20S from Walter Tools is formulated for stainless steel (M) and heat‑resistant superalloys/titanium (S), providing reliable cutting performance where high temperatures and toughness occur. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver increases thermal resistance and reduces wear on the cutting edge, allowing the WSM20S grade to maintain stability and cutting efficiency under elevated temperatures and demanding conditions. Why choose a negative relief angle of 0°? A 0° (negative) relief angle offers stronger cutting edges suitable for heavy cuts and interrupted machining, improving edge life and reducing the likelihood of chipping during roughing operations. What is the benefit of the NFT chipbreaker? The NFT chipbreaker promotes controlled chip formation and evacuation, which supports consistent surface finish and reduces the chance of built‑up edge when machining tough or adhesive materials. Is this an original Walter Tools product and how is authenticity ensured? The item is an original, brand‑new insert from Walter Tools, supplied under the SKU DNMG150404‑NFT‑WSM20S‑WALTER and intended for professional machining applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered article is original and factory‑new.
DNMG150404-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WSM10S grade for extended tool life and secure cutting-edge stability; the Rhombus 55° geometry with a 0.4 mm corner radius and NMS chipbreaker ensures predictable chip control in demanding applications. Order directly via Metav Werkzeuge or contact our consultants for application support. DNMG150404-NMS WSM10S Drehwendeschneidplatte by Walter Tools — Tiger·tec Silver grade for rostfreier Stahl and superalloys, 0° negative rake A DNMG150404-NMS WSM10S indexable turning insert engineered for chip-stable, repeatable performance when machining rostfreier Stahl and heat‑resistant alloys. Tiger·tec Silver coating for extended tool life Grade WSM10S optimised for rostfreier Stahl and superalloys Rhombic 55° shape with 0.4 mm corner radius NMS chipbreaker for reliable chip control Durable coating and grade deliver longer productive cutting intervals The combination of the Tiger·tec Silver coating and the WSM10S grade provides thermal stability and wear resistance that translate directly into fewer tool changes and longer uninterrupted machining periods. Coating technology designed for heat management supports a stable cutting edge when working with sticky or work‑hardening materials, which reduces the risk of built‑up edge and improves process predictability. This results in measurable improvements in tool life and consistent component quality during medium‑ to high‑duty turning. Geometry and chip control that improve surface finish and cycle time The Rhombus 55° insert form together with a 0.4 mm corner radius and a 0° (negative) rake angle creates a rigid cutting geometry that supports fine surface finishing and dimensional stability. The NMS chipbreaker is tuned for interrupted and continuous cuts, promoting controlled chip formation and evacuation. These features help to reduce rework and enable higher feed rates where tooling and machine rigidity permit, delivering a clear balance between productivity and component integrity. Application focus and process reliability for demanding materials Designed for the ISO material groups M and S, the insert is particularly suitable for machining rostfreier Stahl and heat‑resistant superalloys or titanium where thermal and mechanical stresses are high. The grade composition and coating technology are selected to manage heat at the cutting zone and preserve edge strength, supporting consistent performance across series production and one‑off critical components. Shops processing aerospace, energy, and medical components will value the combination of edge stability and wear resistance for reliable manufacturing outcomes. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts, request machining data or availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DNMG150404-NMS-WSM10S-WALTER Article designation: DNMG150404-NMS Product type: Drehwendeschneidplatte Grade: WSM10S Series: Tiger·tec Silver Brand: Walter Tools Facts Size: 15 Corner radius: 0.4 mm Rake angle: 0° (negative) Plate thickness: 04 Tolerance class: M Special features Chipbreaker: NMS Shape: Rhombus 55° Suitable for: rostfreier Stahl (ISO group M) Also suitable for: heat‑resistant superalloys and titanium (ISO group S) Coating/technology: Tiger·tec Silver Intended application: turning / indexable insert operations FAQ What materials is this insert designed to machine? The DNMG150404-NMS WSM10S from Walter Tools is tailored for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering edge materials and coating suited to these demanding groups. How does the NMS chipbreaker influence machining? The NMS chipbreaker promotes predictable chip formation and evacuation, reducing the chance of tangled chips and supporting stable cutting forces during both continuous and interrupted turning operations. What advantages does the Tiger·tec Silver coating bring? Tiger·tec Silver improves thermal resistance and wear properties, which helps to maintain a sharp cutting edge under elevated temperatures and extend usable tool life for the WSM10S grade. Which geometry features help achieve good surface quality? The Rhombus 55° form combined with a 0.4 mm corner radius and a 0° (negative) rake angle provides rigidity and controlled cutting engagement, assisting in achieving consistent surface finish and dimensional accuracy. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the brands listed. The offered article is an original, factory‑new product of the manufacturer.
DNMG150404-NMS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust NMS chipbreaker and a negative 0° rake for secure machining of demanding alloys. Order the (DNMG150404-NMS WSM20S) directly via (Metav Werkzeuge) or ask our consultants if needed. DNMG150404-NMS WSM20S — DNMG150404-NMS turning insert, Tiger·tec Silver coating, for rostfreier Stahl and superalloys (Walter Tools) A DNMG150404-NMS WSM20S indexable insert optimised for turning applications in rostfreier Stahl and heat-resistant superalloys, offering a stable cutting edge and predictable chip formation. Tiger·tec Silver coated cemented carbide Rhombic 55° insert geometry Negative 0° rake for robust cutting Optimised NMS chipbreaker for stable chips High-performance cutting for demanding alloys The combination of the WSM20S grade and Tiger·tec Silver technology ensures reliable performance when machining tough materials such as rostfreier Stahl and heat-resistant superalloys. The coated cemented carbide substrate supports a stable cutting edge and reduced wear rates, which translates into longer tool life and fewer interruptions in the production flow. The description of the grade indicates its specific design for difficult-to-machine alloys; in practice this means improved process security and consistent surface quality on components that generate high temperatures and tend to work-harden. Predictable chip control and edge stability Thanks to the NMS chipbreaker and the insert’s geometry, chip formation is controlled and evacuation is promoted even under heavy cutting conditions. The rhombic 55° shape and a 0.4 mm corner radius provide a balance between strength and versatility, allowing both roughing and medium finishing passes with a stable cutting edge. Explained simply: the chipbreaker shapes the swarf to avoid entanglement and reduces the risk of built-up edge, while the robust geometry protects the cutting edge against thermal and mechanical shock. Robust geometry for industrial throughput A negative 0° rake and a solid mounting form deliver mechanical rigidity that suits interrupted cuts and heavy depths of cut. The insert’s DNMG150404-NMS designation defines the basic geometry and size, making it compatible with standard clamping systems for turning tools. For operations where repeatability and low vibration are priorities, the insert’s execution and tolerance class M contribute to constant results and easier process setting. The coated grade supports higher cutting parameters compared with uncoated grades, so cycle times can be reduced while maintaining surface integrity. Integration into production and handling advantages The insert’s standardized form and clear grade coding make tool management straightforward: stocks can be rotated, and tool change procedures remain consistent across batches. As a component of the Tiger·tec Silver family, the cutting grade is designed to cover a wide range of applications, simplifying the choice of tooling for mixed-production environments. Where additional data is required for machining parameters or mounting recommendations, Metav Werkzeuge provides technical advice to match cutting speed and feed to the specific alloy and part geometry. Contact Metav Werkzeuge for specification advice on the Tiger·tec Silver DNMG150404-NMS WSM20S insert, including recommended cutting parameters and availability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150404-NMS-WSM20S-WALTER Label: Drehwendeschneidplatte DNMG150404-NMS WSM20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM20S Execution: G SKU: DNMG150404-NMS-WSM20S-WALTER Numbers / Core technical data Geometry: Rhombus 55° Corner radius: 0.4 mm Free rake: 0° (negative) Insert size: 15 Thickness: 04 Tolerance class: M Special features / Versions Coating technology: Tiger·tec Silver Material: coated cemented carbide Chipbreaker: NMS Suitable for: rostfreier Stahl Also suitable for: heat-resistant superalloys and titanium (S-group) ISO designation: DNMG150404-NMS WSM20S FAQ What materials is this insert suitable for? The DNMG150404-NMS WSM20S insert is specified for rostfreier Stahl and for heat-resistant superalloys and titanium, covering the ISO M and S groups. What does the WSM20S grade offer compared with general-purpose grades? WSM20S, part of the Tiger·tec Silver family, offers enhanced thermal stability and edge protection, resulting in longer tool life when machining tough, heat-prone alloys. How does the NMS chipbreaker affect machining? The NMS chipbreaker shapes and breaks chips reliably, improving evacuation and reducing the risk of built-up edge during turning operations with the DNMG150404-NMS geometry. Is the insert suitable for interrupted cuts and heavy depths of cut? Yes; the negative 0° rake and robust rhombic geometry provide the rigidity and edge strength required for interrupted cuts and higher material removal rates. Which toolholders are compatible with this insert? Any standard DNMG indexable turning toolholder that accepts DNMG150404 inserts will be compatible; ensure the clamping system matches the insert’s negative seating form. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer Walter Tools.
DNMG150408-FM5 WMP20G G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP20G grade to achieve stable chip control and prolonged edge life when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult the team for tailored cutting data and application advice. DNMG150408-FM20 WMP20G turning insert (for rostfreier Stahl) — Walter Tools The DNMG150408-FM5 WMP20G is a precision turning insert designed for robust performance in rostfreier Stahl applications, combining a Tiger·tec Gold coating with an FM5 chipformer for consistent results Tiger·tec Gold coated grade WMP20G Optimised FM5 chipformer for stable chips 0.8 mm nose radius for consistent finishes Rhombic 55° geometry with 0° negative rake Increased component quality through coating and grade The combination of the Tiger·tec Gold coating and the WMP20G cutting grade is engineered for turning rostfreier Stahl, a material group prone to tough machining conditions and built-up edge formation. The advanced coating reduces wear and supports a secure edge when temperatures rise, while the grade chemistry promotes stable chip formation under medium to robust cutting conditions. For production environments requiring repeatable surface finish and predictable tool life, this insert delivers measurable improvements in process reliability. Geometry and chip control for reliable turning operations The insert’s FM5 chipbreaker and rhombic 55° form are tuned to manage chips and reduce vibrations during interrupted cuts. The 0.8 mm nose radius helps produce consistent surface finishes without sacrificing strength at the cutting edge, and the 0° (negative) relief angle contributes to a robust cutting geometry that resists edge chipping. These design choices lower the risk of unexpected tool changeovers and improve cycle-to-cycle consistency in series production or demanding one-off work. Productivity advantages for workshops and production lines As an indexable insert, the component minimises downtime: edges can be indexed quickly to restore cutting performance without regrinding. The insert’s stable cutting characteristics reduce scrap rates and help maintain throughput in batch production. For shops processing rostfreier Stahl where flank and crater wear are critical, the insert’s features support longer service intervals and fewer process interruptions, translating into better machine utilisation and predictable output rates. Practical considerations and recommended application zones This insert is intended primarily for rostfreier Stahl machining under medium to robust conditions; the WMP20G grade provides a balance between wear resistance and edge toughness for such applications. The FM5 chipformer aids in producing manageable chip shapes during typical turning passes. For best results, pair the insert with suitable toolholders and set feeds/speeds according to machine rigidity and part geometry; trial cuts with incremental adjustments will identify the optimal parameters for each rostfreier Stahl alloy. Contact Metav Werkzeuge for availability, cutting data and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss Walter Tools solutions and matching toolholders Technical data Article number: DNMG150408-FM5-WMP20G-WALTER Designation: DNMG150408-FM5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Facts Plate size: 15 Thickness: 04 Nose radius: 0.8 mm Relief angle: 0° (negative) Special features FM5 chipbreaker Rhombic 55° plate form Coating technology: Tiger·tec Gold Suitable for rostfreier Stahl machining Execution: G FAQ What materials is this insert suitable for? The DNMG150408-FM5 WMP20G insert is specified for machining rostfreier Stahl and is optimised for the particular demands of those alloys. How does the FM5 chipformer affect performance? The FM5 chipformer on the DNMG150408-FM5 supports stable chip formation and easier evacuation, reducing the likelihood of built-up edge during rostfreier Stahl turning. Is the 0.8 mm nose radius suitable for finishing? Yes, the 0.8 mm nose radius on this Walter Tools insert balances edge strength with the ability to produce consistent surface finishes in typical turning operations. Can this insert be used for interrupted cuts? The negative 0° relief angle and robust grade make the insert well suited to interrupted cutting scenarios that occur in many rostfreier Stahl applications. What series and coating technology does the insert use? The DNMG150408-FM5 WMP20G belongs to the Tiger·tec Gold series, featuring a specialised coating for enhanced wear resistance and thermal stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools: The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision metalworking tools and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands beyond the sale of original, factory-new goods from the manufacturer.
DNMG150408-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a high-performance indexable insert that combines the Tiger·tec Silver coating with a robust WSM10S carbide grade for reliable machining of stainless steels and heat-resistant alloys; the optimised FM5 chipbreaker improves chip control and prolongs tool life. Order the DNMG150408-FM5 WSM10S insert directly via Metav Werkzeuge or ask their consultants for application advice. DNMG150408-FM5 WSM10S indexable turning insert — Rhombic 55°, Tiger·tec Silver, Walter Tools The DNMG150408-FM5 WSM10S is an indexable turning insert engineered for productive turning of stainless steels and difficult-to-machine superalloys, combining a Tiger·tec Silver coating with a geometry optimised for stable cutting and chip control. Tiger·tec Silver coated carbide grade WSM10S Optimised FM5 chipbreaker for stable chip control Rhombic 55° form with 0° negative clearance Suitable for stainless steels and superalloys Enhanced performance for tough materials The combination of the WSM10S grade and the Tiger·tec Silver coating delivers elevated thermal resistance and wear protection, which translates into more consistent cutting over longer tool life. The substrate and coating are developed to withstand the characteristics of stainless steels and heat-resistant alloys (ISO groups M and S), where heat generation and edge stress are critical. This results in a measurable improvement in process stability and fewer unplanned tool changes, supporting higher productivity on demanding turning operations. Reliable chip formation and process security A decisive advantage of this insert is the FM5 chipbreaker, which is tuned to produce predictable chip shapes when machining ductile, work-hardening materials. Predictable chip control reduces the risk of snarled chips at the tool edge and promotes consistent surface finish, thereby lowering rework rates. The negative clearance of 0° combined with the rhombic 55° shape stabilises the cutting edge under variable cutting forces, aiding secure seat clamping and repeatable performance during series production. Geometry that supports versatility and accessibility The rhombic 55° form and the corner radius of 0.8 mm balance strength and accessibility: the geometry permits both general turning and light profiling while maintaining an edge robust enough for interrupted cuts common in stainless and superalloy turning. The insert thickness and size class provide a compact but rigid solution for a wide range of tool holders, helping maintain cutting parameters closer to optimal values and reducing vibrations that can compromise surface integrity. Practical selection and application guidance Selection is simplified by the clear designation of the insert series and sort: Tiger·tec Silver in WSM10S is recommended for operations where thermal stability and stable cutting edges are required. When integrating into an existing toolset, align cutting speeds and feeds with manufacturer guidance for stainless steels and superalloys; moderate cutting speeds with controlled feed and ample coolant often yield the best balance between tool life and component quality. If unsure about parameter selection for a specific alloy, Metav Werkzeuge’s consultants can provide practical recommendations based on the intended application. Contact Metav Werkzeuge for tailored machining advice or to discuss how the Tiger·tec Silver DNMG150408-FM5 WSM10S insert can improve process stability in production environments Technical Data SKU: DNMG150408-FM5-WSM10S-WALTER Article designation: DNMG150408-FM5 Full designation: DNMG150408-FM5 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade/sort: WSM10S Chipbreaker: FM5 Form: Rhombus 55° Clearance: 0° (negative) Corner radius: 0.8 Plate size: 15 Plate thickness: 04 Execution: G Tolerance class: M Material suitability: S / M Facts Corner radius: 0.8 mm Plate size: 15 Thickness code: 04 Clearance angle: 0° (negative) Special features Coating technology: Tiger·tec Silver Carbide grade: WSM10S (coated cemented carbide) Target materials: stainless steels (M), superalloys/titanium (S) Optimised chip control: FM5 chipbreaker Shape advantage: Rhombic 55° for accessibility and strength FAQ What materials is this insert suitable for? The DNMG150408-FM5 WSM10S insert is designed for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S), where the Tiger·tec Silver coating and the WSM10S grade offer improved thermal resistance and edge stability. How does the FM5 chipbreaker improve machining? The FM5 chipbreaker on this Walter Tools insert produces controlled chip forms during turning of ductile and work-hardening materials, reducing chip-related interruptions and supporting consistent surface quality. Which geometry benefits are provided by the Rhombic 55° form? The Rhombic 55° shape gives a compromise between access for profiling and robustness for general turning; combined with the 0° negative clearance it enhances cutting-edge stability under varying loads. Is the DNMG150408-FM5 WSM10S suitable for interrupted cuts? Yes, the coated WSM10S grade and the selected corner radius provide a durable cutting edge suitable for interrupted and continuous turning applications commonly encountered with stainless steels and superalloys. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
DNMG150408-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger·tec Silver grade, a stable FM5 chipbreaker and a defined 0.8 mm corner radius for consistent performance in stainless steels and high-temperature alloys; order directly via Metav Werkzeuge or contact our specialists for application advice. DNMG150408-FM5 WSM20S indexable turning insert by Walter Tools — Tiger·tec Silver grade for stainless steels and superalloys DNMG150408-FM5 WSM20S is an indexable turning insert engineered for demanding applications in stainless steels and heat-resistant superalloys, offering high cutting-edge stability and predictable wear behaviour. Tiger·tec Silver grade for durable edges Optimised FM5 chipbreaker for stable chips Rhombic 55° form, negative 0° rake angle 0.8 mm corner radius for consistent finishes Enhanced edge life where material hostility is highest The insert uses the WSM20S grade within the Tiger·tec Silver family, a coated carbide designed specifically for the thermal and mechanical stresses of stainless steels and superalloys. The advanced coating promotes stable chip formation and reduces edge build-up, which translates into longer tool life and fewer interruptions in production. For operations where component integrity and repeatability matter, the combination of substrate and coating reduces the risk of premature flank wear and supports consistent dimensional results. Controlled chip flow and surface quality The integrated FM5 chipbreaker has been tailored to the insert geometry to ensure controlled chip breaking across typical turning feeds for tough materials. Paired with the rhombic 55° outline and a 0° negative rake, the geometry improves cutting-edge robustness and helps maintain a steady cutting load. The defined 0.8 mm corner radius assists in achieving reliable surface finishes while also distributing cutting forces over a broader edge, lowering the incidence of micro-chipping on interrupted cuts. Process predictability and productivity gains Designed for industrial turning tasks in group M and S materials, this insert supports higher process security and fewer unplanned tool changes. The stable cutting edge behaviour afforded by the Tiger·tec Silver technology increases usable edge life, which can result in measurable productivity improvements and reduced tool inventory turnover. For production environments focusing on reproducibility and throughput, the insert provides a reliable baseline for machining strategies in corrosive or heat-resistant alloys. Clear designation and practical mounting guidance The designation DNMG150408-FM5 summarises the key geometry: a rhombic 55° plate with the FM5 chipbreaker and a 0.8 mm corner radius, presented in the WSM20S grade of the Tiger·tec Silver series. The insert is supplied in the common DNMG form factor, compatible with standard turning toolholders designed for this plate geometry. Selection of appropriate clamping torque and holder rigidity will complement the insert’s properties and help to realise the intended benefits in finish and edge life. For reliable machining of stainless steels and superalloys, choose the Walter Tools Tiger·tec Silver DNMG150408-FM5 WSM20S insert — order original stock via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored cutting data and application support Technical data SKU: DNMG150408-FM5-WSM20S-WALTER Article designation: DNMG150408-FM5 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Data Size: 15 mm Corner radius: 0.8 mm Thickness: 04 Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: FM5 Form: Rhombus 55° Applicable materials: S / M (superalloys, stainless steels) Execution: G Base designation without grade: DNMG150408-FM5 FAQ What materials is this insert suitable for? The DNMG150408-FM5 WSM20S insert is intended for stainless steels and heat-resistant superalloys (ISO groups M and S); Walter Tools specified the WSM20S grade for these material classes. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker provides controlled chip formation and evacuation when machining stainless steels and superalloys with the DNMG150408-FM5 geometry, helping to maintain a secure cutting process and consistent surface finish. What does the 0.8 mm corner radius deliver in practice? A 0.8 mm corner radius balances edge strength and surface quality, reducing the likelihood of edge chipping while supporting improved finish on turned components when using the WSM20S grade. Is this insert suitable for interrupted cuts? Yes, the combination of the rhombic 55° form, negative 0° rake and the Tiger·tec Silver grade offers robust edge behaviour suitable for many interrupted turning applications in tough materials. Which series and brand are represented by this SKU? The SKU DNMG150408-FM5-WSM20S-WALTER refers to an insert from the Tiger·tec Silver series manufactured by Walter Tools, grade WSM20S. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools (brand of Walter AG) is a recognised provider of precision cutting tools. Protected trademarks and trade names are the property of their respective owners. The referenced brand names are used for explanation only and do not imply any affiliation or endorsement.
DNMG150408-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Achieve longer tool life and consistent surface finish by combining the WEP10C cermet grade, a 0.8 mm corner radius, and the rhombic 55° geometry for reliable finishing cycles; order directly via Metav Werkzeuge or consult our specialists for process alignment. DNMG150408-FP5 WEP10C rhombic 55° cermet turning insert – Walter Tools The DNMG150408-FP5 WEP10C is a rhombic 55° indexable turning insert designed for fine finishing and stable chip formation in precision turning applications. Cermet grade WEP10C for superior edge life Rhombic 55° shape for flexible tool setups 0.8 mm corner radius for consistent surface finish Negative 0° relief for stable cutting geometry Consistent finishing and reduced tool changes The combination of WEP10C and a tailored chipbreaker provides a balance between wear resistance and surface quality. As a cermet grade, the substrate offers a hard, wear-resistant cutting edge that preserves profile accuracy over extended cycles, which results in fewer tool changes and higher machine uptime. The FP5 chipbreaker supports controlled chip formation, reducing the risk of built-up edge and producing a predictable finish in facing and light turning operations. Geometry engineered for stability and adaptability The rhombic 55° form and 0.8 mm corner radius deliver a compromise between accessibility and strength: the acute geometry allows entry into tighter features while the corner radius sustains a reliable cutting edge for improved surface finish. The negative 0° relief provides a robust cutting geometry that resists edge chipping under variable cutting forces. These characteristics make the insert suited to setups that demand repeatable, high-quality finishes with minimal rework. Practical integration and process considerations Belonging to the Walter Cermet series, this indexable insert matches common toolholder systems for DNMG-style inserts and adheres to tolerance class M, ensuring dimensional consistency across lots. The material designation is marked as catalogue-dependent; therefore, material suitability should be verified against the manufacturer’s product matrix before process approval. For customers seeking improved surface integrity without sacrificing productivity, this insert offers a pragmatic route to stabilise finishing cycles while maintaining predictable tool behaviour. Contact Metav Werkzeuge for tailored advice on Walter Tools cermet inserts and to discuss process optimisation; email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical review. Technical Data Article number: DNMG150408-FP5-WEP10C-WALTER Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Walter Cermet Designation: DNMG150408-FP5 WEP10C UID: DNMG150408-FP5-WEP10C-WALTER Facts Corner radius: 0.8 mm Plate size: 15 Plate thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Cermet grade WEP10C Chipbreaker: FP5 Plate form: Rhombus 55° Execution: G (negative geometry) Material: Katalogabhängig Series description: Walter Cermet FAQ What is the primary advantage of the WEP10C grade? The WEP10C grade is a cermet composition developed within the Walter Cermet series that emphasises wear resistance and edge stability for improved tool life and consistent surface finish on fine turning operations. Which chip behaviour does the FP5 chipbreaker provide? The FP5 chipbreaker on the DNMG150408-FP5 WEP10C promotes controlled chip formation and evacuation, supporting stable cutting forces and reducing the likelihood of built-up edge during finishing passes. How does the rhombic 55° shape influence accessibility? A Rhombus 55° configuration offers a favourable entry angle for external and light internal profiles, combining accessibility with sufficient edge strength to maintain consistent results when using this indexable insert. Is material compatibility specified for this insert? Material suitability for the DNMG150408-FP5 WEP10C must be checked in the manufacturer’s product matrix; the Walter Cermet series is optimised for fine finishing, but specific workpiece alloys and heat treatments require verification. What does tolerance class M mean for production? Tolerance class M denotes standard dimensional tolerances for this family of inserts, ensuring interchangeability and predictable tool pocket fit for accurate positioning and repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are cited for explanation only; there is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer.
DNMG150408-FP5 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the FP5 chipbreaker for consistent chip control and extended tool life, ensuring productive turning of steel and cast iron; order or request application advice via Metav Werkzeuge for seamless integration into production. DNMG150408-FP5 WKP01G — indexable turning insert, Tiger·tec Gold, FP5 chipbreaker (Walter Tools) DNMG150408-FP5 WKP01G is an indexable turning insert optimised for productive machining of steel and cast iron in general turning applications Tiger·tec Gold coating for extended tool life FP5 chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning Suitable for steel and cast iron machining Increase throughput with predictable wear behaviour The combination of the WKP01G grade and Tiger·tec Gold technology provides a measurable improvement in tool life and repeatability. The coated carbide construction offers thermal and mechanical resistance that stabilises the cutting edge under continuous turning loads. As a result, process windows widen and downtime for indexable insert changes is reduced, delivering higher machine utilisation and lower cost per component. Consistent chip control for safer, faster turning The FP5 chipbreaker is engineered to produce short, manageable chips when turning both steel and cast iron, reducing the risk of entanglement and improving swarf handling. This controlled chip formation enables higher feed rates without compromising surface finish or worker safety. The clear cause-and-effect between chip geometry and feed strategy allows planners to raise productivity while maintaining stable machining. Geometry for flexible applications and reliable engagement The Rhombic 55° shape with a 0° (negative) rake angle ensures secure seat contact in standard toolholders and offers a balance between cutting edge strength and accessibility in general turning. The 0.8 mm corner radius supports improved edge robustness during interrupted cuts and helps maintain dimensional stability across longer tool life cycles, which is particularly valuable in batch production environments. Straightforward selection and integration into existing workflows Marked by tolerance class M and the familiar DNMG form factor, the insert fits typical tooling systems used in modern turning centres. The designation facilitates quick identification for procurement and inventory management, while the WKP01G grade broadens material coverage to include a range of unalloyed and alloyed steels plus various irons. Specification clarity simplifies process planning and reduces the likelihood of mismatched insert choices. Contact Metav Werkzeuge today for tailored advice on applying the Walter Tools DNMG150408-FP5 WKP01G insert and to discuss optimal parameters for improved productivity and reduced tooling costs Technical data Article number: DNMG150408-FP5-WKP01G-WALTER Label: Drehwendeschneidplatte DNMG150408-FP5 WKP01G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core specifications Plate size: 15 Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness code: 04 Geometry: Rhombic 55° Chipbreaker: FP5 Tolerance class: M Materials & special features Coating / series: Tiger·tec Gold Grade: WKP01G (coated carbide) Suitable for: steel (P), cast iron (K) Typical applications: general turning of steel and cast iron Series attributes: stability, good edge life, broad material coverage FAQ What materials is this insert suitable for? The DNMG150408-FP5 WKP01G insert is designed for machining steel (P) and cast iron (K) in accordance with its WKP01G grade and Tiger·tec Gold coating. How does the FP5 chipbreaker improve productivity? The FP5 chipbreaker promotes short, controllable chips and stable swarf behaviour, enabling higher feeds and more consistent cycle times with the DNMG150408-FP5 WKP01G insert. Is the Rhombic 55° geometry suitable for finishing cuts? Yes; the Rhombic 55° form provides versatile access and, when paired with appropriate feeds and speeds, achieves reliable surface quality during finishing with this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, factory-new merchandise of Walter Tools.
DNMG150408-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of the Tiger·tec Gold coated carbide grade and the FP5 chipbreaker delivers consistent chip control and extended tool life for steel machining; the rhombic 55° geometry with a 0.8 mm corner radius and 0° negative relief ensures reproducible surface finish and reliable cutting performance. Order the DNMG150408-FP5 WPP10G insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408-FP5 WPP10G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools The DNMG150408-FP5 WPP10G is a rhombic 55° indexable turning insert designed for precision machining of steel, providing stable cutting, predictable chip formation and a balanced wear‑resistance/to‑toughness performance. Coated carbide Tiger·tec Gold grade WPP10G Rhombic 55° geometry, 0.8 mm corner radius 0° negative relief for stable cutting Designed for steel machining, ISO P group Predictable machining with a premium coated grade The coated carbide WPP10G grade of the Tiger·tec Gold series combines a wear‑resistant coating with a substrate chosen for balanced toughness, which results in consistent tool life when working in the ISO P material group (steel). This chemistry and coating combination improves resistance to abrasive wear while maintaining edge stability under typical steel cutting temperatures. For production environments that demand repeatability, the insert’s composition reduces the frequency of tool changes and supports a steady process flow. Geometry engineered for surface quality and stability The rhombic 55° form with a 0.8 mm corner radius and 0° negative relief provides a cutting geometry that minimises chatter and supports a reproducible surface finish on turned parts. The FP5 chipbreaker is tuned for steel applications to promote controlled chip segmentation and evacuation, lowering the risk of built‑up edge and helping to protect the toolholder and workpiece. As a result, the insert offers both stability during interrupted cuts and reliable performance in continuous turning. Application focus: efficient steel turning Designed expressly for steel machining, this insert addresses the thermal and mechanical demands of unalloyed and alloyed steels by delivering a compromise between wear resistance and toughness. The grade’s characteristics make it suitable for a broad range of turning tasks where consistent dimensional results and surface integrity are priorities. Integrating this insert into a systematic cutting strategy can raise overall productivity through fewer profilings and a lower scrap rate. Integration into workshops and tooling systems The DNMG format ensures compatibility with common negative‑style toolholders for indexable turning, supporting fast indexing and straightforward tool management. The ISO designation and series labelling facilitate correct grade selection for process planning and allow straightforward comparison with alternative inserts. For operational questions or to confirm compatibility with specific toolholders and applications, the Metav Werkzeuge team can provide guidance and supplementary technical information. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and secure a tailored recommendation for steel machining applications via Metav Werkzeuge Technical Data Article number: DNMG150408-FP5-WPP10G-WALTER Designation: DNMG150408-FP5 Manufacturer: Walter Tools Facts Insert size: 15 Corner radius: 0.8 Relief angle: 0° (negative) Plate form: Rhombic 55° Tolerance class: M Grade: WPP10G Series: Tiger·tec Gold Special features Coated carbide (Tiger·tec Gold) Chipbreaker FP5 Application group: ISO P (Steel) Geometry: DNMG 15 format FAQ What materials is this insert suitable for? The DNMG150408-FP5 WPP10G insert is specified for the ISO P material group and is intended primarily for machining steel. How does the Tiger·tec Gold grade benefit production? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance while preserving edge stability, giving more consistent tool life and fewer unexpected tool changes in steel turning operations. What role does the FP5 chipbreaker play? The FP5 chipbreaker is designed to control chip formation and evacuation in steel machining, reducing built‑up edge and improving process reliability. Is this insert compatible with standard DNMG toolholders? Yes, the DNMG150408-FP5 format is compatible with negative‑style toolholders designed for DNMG inserts, enabling quick indexing and straightforward replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original factory-new product of the manufacturer. The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
DNMG150408-FP5 WPP20G FP5 Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WPP20G grade gives a robust, wear-resistant cutting solution for steel; the insert’s rhombic 55° geometry and FP5 chipbreaker provide reliable chip control and consistent surface finish. Order directly via Metav Werkzeuge or contact our consultants for application guidance. DNMG150408-FP5 WPP20G indexable turning insert — Tiger·tec Gold for steel | Walter Tools DNMG150408-FP5 WPP20G is a coated carbide turning insert designed for productive steel machining, offering stable chip formation and extended tool life Tiger·tec Gold coated carbide Optimised FP5 chipbreaker Rhombic 55° geometry (DNMG) Corner radius 0.8 mm, negative rake 0° Consistent performance for steel turning The WPP20G grade, utilising Walter’s Tiger·tec Gold technology, is a coated carbide solution engineered for machining steels under the thermal and metallurgical conditions typical of such materials. As a grade classed for general to wear-resistant performance, it balances tool life and versatility so that shops can maintain higher productivity over extended cycles. The coating technology supports stable cutting edges and improved resistance to flank wear, which translates into fewer insert changes and more predictable production planning. Geometry and chip control for dependable results The rhombic DNMG form with 55° included angle provides comfortable approach geometry for a wide range of turning tasks, while the FP5 chipbreaker is matched to the insert’s micro-geometry for controlled chip formation in steel. A corner radius of 0.8 mm gives a good compromise between edge strength and surface finish, and the negative rake 0° relief supports interrupted cuts and applications where a robust cutting edge is required. Together, these features reduce the risk of edge chipping and help to maintain consistent surface quality across batches. Practical workshop benefits and integration As an indexable insert, this DNMG-style solution fits standard holders and simplifies tool management in production environments. The designation includes commonly referenced codes—size 15 and thickness code 04—so replacement and stock control are straightforward. The insert is supplied in tolerance class M, supporting repeatable seating and accurate tool offsets. With material application identified as P (steel), the component is ready for inclusion in turning toolpaths where steel is the primary workpiece material, enabling efficient machining and stable process windows. For application advice or to request a quotation for the Walter Tools DNMG150408‑FP5 WPP20G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (SKU): DNMG150408-FP5-WPP20G-WALTER Designation: DNMG150408-FP5 WPP20G Product type: indexable turning insert Brand: Walter Tools Core specifications Insert size: 15 Thickness code: 04 Corner radius: 0.8 mm Relief/freerake: 0° (negative) Chipbreaker: FP5 Tolerance class: M Grade execution: G Materials & special features Coating / grade: Tiger·tec Gold — WPP20G Material application: Steel (P) Shape: Rhombic 55° (DNMG) Series: Tiger-tec Gold Suitable for general and wear-resistant steel machining FAQ Is this insert suitable for machining steel? Yes. The DNMG150408‑FP5 WPP20G by Walter Tools is specified for steel (material group P) and the grade is tailored to the thermal and chip-formation behaviour typical of steel machining. What does WPP20G indicate? WPP20G is Walter’s coated carbide grade within the Tiger·tec Gold family; it denotes a balanced performance grade positioned between wear-resistant and universal grades for steel turning. Which geometry and corner radius does the insert have? The insert has a rhombic 55° geometry (DNMG) and a corner radius of 0.8 mm, providing a compromise between edge strength and surface finish suitable for many turning operations. What is the function of the FP5 chipbreaker? The FP5 chipbreaker is paired with this insert to promote consistent chip formation and evacuation during steel turning, supporting steady process behaviour and surface quality. How is the insert supplied in terms of tolerance and mounting? The item is produced to tolerance class M and matches standard DNMG holders, facilitating repeatable seating and straightforward replacement in existing tool assemblies. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DNMG150408-FW5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the proven Tiger-tec Gold coating and the robust WKP01G grade for reliable machining of steel and cast iron; the combination of stable chip control and a defined 0.8 mm corner radius supports consistent productivity. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DNMG150408-FW5 WKP01G indexable turning insert — Walter Tools — for steel and cast iron, Tiger‑tec Gold coating The DNMG150408-FW5 WKP01G is a rhombic 55° indexable turning insert designed for general turning of steel (P) and cast iron (K), offering a negative 0° rake and an FW5 chipbreaker for controlled chip formation. Tiger‑tec Gold coated grade WKP01G Suitable for steel (P) and cast iron (K) Rhombus 55° geometry with 0.8 mm nose radius FW5 chipbreaker for consistent chip control Increase throughput with a coated, high‑performance grade The WKP01G grade, part of the Tiger‑tec Gold series, provides a coated carbide solution tuned for the thermal and abrasive demands of turning steel and cast iron. The advanced coating improves wear resistance and cutting edge stability, which translates directly into longer toollife and fewer tool changes. For production-focused shops, this means higher machine utilisation and a lower cost per component through reduced downtime and predictable edge behaviour. Stable machining results thanks to optimised geometry A rhombus 55° insert form combined with the FW5 chipbreaker ensures reliable chip control and reproducible surface quality in standard turning tasks. The 0.8 mm corner radius balances strength and finish, allowing a compromise between edge robustness and the capability to produce fine surface textures. The 0° negative rake enhances insert strength for interrupted cuts and hard turning scenarios, helping to maintain process security in mixed batch production. Easy specification and consistent quality for production planning With tolerance class M and the standard designation, the insert fits common toolholders and clamping systems used in industry. The clear material coding (P / K) simplifies selection for jobs involving unalloyed or alloyed steels and a wide range of cast irons. Suppliers and toolroom planners benefit from consistent part identification and repeatable performance, supporting lean tool management and quicker set‑up times on the shopfloor. Contact Metav Werkzeuge for availability, tailored recommendations and application guidance by e‑mail or phone Technical data Article number: DNMG150408-FW5-WKP01G-WALTER Designation: DNMG150408-FW5 WKP01G Series: Tiger‑tec Gold Grade: WKP01G Dimensions & core data Inscribed circle / size: 15 mm Thickness: 4 mm Corner radius: 0.8 mm Geometry: Rhombus 55° Rake angle: 0° (negative) Chipbreaker: FW5 Tolerance class: M Design & special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Material application: steel (P) and cast iron (K) Typical use: general turning, mixed production Manufacturer: Walter Tools FAQ What materials are suitable for this insert? The DNMG150408-FW5 WKP01G is intended for steel (P) and cast iron (K) applications; the WKP01G grade is formulated for the heat and chip behaviour typical of these materials. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold enhances wear resistance and edge stability on the WKP01G insert, leading to longer toollife and more consistent component quality over extended runs. What cutting geometry does this insert offer? The insert provides a rhombus 55° shape with a 0.8 mm corner radius and 0° negative rake, which supports strength in interrupted cuts and predictable finishing. Which chipbreaker is fitted and what is its function? The FW5 chipbreaker is specified for controlled chip formation during turning, improving surface finish and reducing the risk of long, entangling chips. Is this insert compatible with standard toolholders? Yes — the DNMG150408-FW5 form and tolerance class M match common indexable turning toolholder systems used in industrial turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the WPP10G grade and Tiger·tec Gold coating combined with the FW5 chipbreaker to increase process reliability and tool life; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150408-FW5 WPP10G indexable turning insert — Walter Tools, Tiger·tec Gold, for steel machining DNMG150408-FW5 WPP10G is an indexable turning insert designed for reliable steel turning in general machining and production environments Tiger·tec Gold coating technology WPP10G grade optimised for steel FW5 chipbreaker for stable chips Rhombic 55° form, corner radius 0.8 mm High-performance grade that extends productive cutting windows The combination of the WPP10G grade and Tiger·tec Gold coating delivers a robust balance of wear resistance and toughness specifically tuned for machining steels (ISO group P). This coated carbide composition reduces flank wear under typical turning temperatures, which translates into longer tool life and fewer insert changes. With improved edge stability, batch runs benefit from consistent dimensional results and lower machine downtime, supporting higher overall equipment effectiveness and predictable throughput. Geometry that supports consistent surface quality and process stability The rhombic 55° insert geometry with a negative 0° relief angle provides secure clamping and controlled cutting forces in interrupted and continuous cuts. The corner radius 0.8 mm enhances edge strength for medium and finishing passes, while the FW5 chipbreaker promotes stable chip formation across a range of feed rates. These geometric choices reduce vibration and enable repeatable surface finish, which is particularly advantageous for serial production where reproducibility and minimised rework are priorities. Practical application advice for integration into the production process Designed for steel machining, this insert suits a wide spectrum of operations from roughing to finishing in workshops and job shops. The DNMG150408-FW5 format allows straightforward indexation and economical use of insert edges. When combined with appropriate cutting data adapted to the WPP10G wear characteristics, users can expect balanced tool performance and predictable tool-change intervals. For process optimisation, pairing the insert with stable tooling and correct coolant strategy will further improve chip control and component quality. Contact Metav Werkzeuge for tailored cutting data, stock information and application recommendations for Walter Tools Tiger·tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: DNMG150408-FW5-WPP10G-WALTER Article designation: DNMG150408-FW5 WPP10G Product type: indexable turning insert Manufacturer: Walter Tools Numbers / Core technical data Corner radius: 0.8 mm Insert size: 15 mm Thickness code: 04 Relief angle: 0° (negative) Insert form angle: 55° Special features / Versions Coating/series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FW5 Tolerance class: M Applicable material group: Steel (ISO P) FAQ What material is this insert intended for? The insert is specified for machining steel (ISO group P); the WPP10G grade and Tiger·tec Gold coating are tuned for the thermal and chip-formation characteristics of steel. How does the FW5 chipbreaker influence machining? The FW5 chipbreaker stabilises chip formation and evacuation, reducing the risk of entanglement and supporting consistent surface finish across varied feeds. Which insert geometry is used and what is the benefit? A rhombic 55° geometry with a negative 0° relief provides secure seating and low axial engagement, improving stability in interrupted cuts and supporting reproducible part quality. Is this insert suitable for finishing passes? Yes; with its 0.8 mm corner radius and coated grade, the insert supports finishing operations while maintaining acceptable edge life when cutting steel. How is the product referenced when ordering replacement inserts? Use the ISO designation DNMG150408-FW5 WPP10G or the SKU DNMG150408-FW5-WPP10G-WALTER to ensure the correct Tiger·tec Gold insert is supplied. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
DNMG150408-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the FW5 chipbreaker and a 0.8 mm nose radius for stable cutting-edge life and predictable chip control; order the insert directly via Metav Werkzeuge or consult our specialists for process-specific advice. DNMG150408-FW5 WSM20S indexable turning insert by Walter Tools — Tiger‑tec Silver, rhombic 55° The DNMG150408-FW5 WSM20S is a Tiger‑tec Silver-coated indexable turning insert engineered for heavy‑duty turning of stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for thermal stability Optimised FW5 chipbreaker for secure chip control Rhombic 55° shape for versatile turning 0.8 mm nose radius for fine profile accuracy Process-stable performance for demanding materials The combination of a coated carbide substrate and the Tiger‑tec Silver technology delivers enhanced thermal resistance and wear behaviour when machining hard‑to‑cut alloys. This results in a stable cutting edge that reduces unexpected tool changes and supports consistent cycle times. The grade WSM20S, designed for materials classified as M and S according to ISO 513, is optimised for applications where heat build‑up, edge wear and workhardening are critical factors. As a consequence, tool life is extended under the higher temperatures encountered when turning stainless steels and superalloys, improving overall process economy. Reliable chip control and surface quality during turning Thanks to the FW5 chipbreaker, chip formation is guided into predictable, short chips that are easier to evacuate from the cutting zone. Predictable chip flow reduces rework and helps maintain surface finish, which is particularly important when turning corrosion‑resistant components or parts for the aerospace and energy sectors. The negative relief geometry (negative 0°) and rhombic 55° insert shape support robust clamping and allow stable cutting at varied depths of cut, delivering repeatable dimensional accuracy and fewer surface defects across production batches. Geometry explained: why nose radius and relief matter The 0.8 mm nose radius balances profile detail and edge strength: it permits fine contouring while providing sufficient edge support under cutting loads. The negative 0° relief increases edge robustness for interrupted or heavy cuts, making the insert suited to tougher operational conditions than positive‑relief types. The DNMG form (rhombic 55°) is a versatile geometry for external turning and facing; its form helps to distribute cutting forces and enables predictable toolpath strategies on lathes and turning centres. These geometric choices translate into fewer setup adjustments and improved repeatability. Application scenarios and operational benefits When machining components in stainless steel or heat‑resistant alloys, the insert’s composition and chip control reduce the tendency for edge build‑up and thermal‑induced failures. This supports higher process security and consistent surface quality for serial production. For workshops aiming to increase productivity, the mix of thermal resilience, chip control and geometric robustness reduces downtime and contributes to a more efficient machining flow. The insert is compatible with standard DNMG toolholders and can be integrated into existing tool arrangements without additional special tooling. For process‑safe turning with Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for tailored recommendations and rapid supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG150408-FW5-WSM20S-WALTER ISO designation: DNMG150408-FW5 WSM20S Series: Tiger‑tec Silver Grade: WSM20S Chipbreaker: FW5 Insert form: Rhombic 55° Facts Inscribed circle: 15 Nose radius: 0.8 mm Thickness code: 04 Relief angle: 0° (negative) SKU: DNMG150408-FW5-WSM20S-WALTER Special features Coating: Tiger‑tec Silver Substrate: coated carbide (WSM20S) Application: suitable for stainless steels (M) and superalloys/titanium (S) Geometry: rhombic 55°, negative relief, 0.8 mm nose radius Chip control: FW5 chipbreaker FAQ What materials is this insert suitable for? The DNMG150408-FW5 WSM20S is intended for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), with the WSM20S grade optimised for those groups. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker on the DNMG150408-FW5 WSM20S produces short, controlled chips to improve evacuation and surface finish while reducing the risk of entanglement in the cutting area. Can the insert handle interrupted cuts? Yes, the negative 0° relief and robust grade make the insert resilient under interrupted or heavy cuts, offering increased edge strength and process reliability. Is the insert compatible with standard DNMG toolholders? The DNMG150408-FW5 WSM20S conforms to the DNMG designation and is compatible with conventional toolholders designed for DNMG inserts. What benefit does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances thermal stability and wear resistance, which helps maintain the cutting edge and extend tool life when machining demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150408-MK5 WKK10S Wendeplatten - Walter Tools
High abrasion resistance from the Tiger·tec Silver coating combined with a compact Rhombus 55° geometry and a 0.8 mm corner radius delivers consistent, productive turning of cast iron; order the insert directly via Metav Werkzeuge or consult their specialists for cutting data and tool recommendations. DNMG150408-MK5 WKK10S — Indexable turning insert, Rhombus 55°, 0.8 mm corner radius (Walter Tools) A DNMG150408-MK5 WKK10S indexable insert engineered for high-performance turning of cast iron components in industrial production environments. Tiger·tec Silver coating for abrasion resistance Optimised MK5 chipbreaker for short chips Rhombus 55° geometry for versatile turning 0.8 mm corner radius for stable edge life Consistent performance for cast iron machining The coated carbide grade WKK10S in the Tiger·tec Silver family is tuned specifically for abrasive cast iron applications. Its microstructure and multilayer coating increase abrasion resistance, reducing flank wear on interrupted and continuous cuts and thus extending productive tool life. As a result, operators benefit from fewer index changes and more consistent part quality over long production runs. Geometry and chip control that keep production running The Rhombus 55° plate form combined with an MK5 chipbreaker and a 0° (negative) relief angle provides reliable chip formation for brittle, short-chipping materials. The geometry supports stable contact with the workpiece, while the chipbreaker promotes controlled, small chips that improve process security and reduce the risk of tool or workpiece damage. This contributes directly to shorter cycle times and more predictable machining. Durable edge life and economical tool usage A 0.8 mm corner radius and the coated carbide substrate deliver a balance between robustness and fine surface finish. The insert’s design reduces the frequency of tool changes and supports consistent edge strength under varying cutting conditions. Reduced downtime and reliable repeatability make the insert a cost-effective choice for medium- to high-volume turning of cast iron components. Integration into production and application notes This insert is intended for ISO group K (cast iron) applications and fits standard indexable turning toolholders that accept DNMG-style plates. The MK5 chipbreaker is particularly effective where short, fragmented chips are desired. For optimal results, pair the insert with cutting parameters recommended for cast iron and consult Metav Werkzeuge for tailored speeds and feeds based on machine rigidity and part geometry. The SKU DNMG150408-MK5-WKK10S-WALTER identifies the exact specification for ordering or inventory purposes. Secure Tiger·tec Silver performance through Metav Werkzeuge — request tailored cutting data or place an order for DNMG150408-MK5 WKK10S directly with our consultants Technical data Article number: DNMG150408-MK5-WKK10S-WALTER Designation: DNMG150408-MK5 WKK10S Product type: indexable turning insert Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Plate size: 15 mm Plate thickness: 0.4 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating/grade: Tiger·tec Silver — WKK10S Chipbreaker: MK5 Plate form: Rhombus 55° Suitable for: cast iron (ISO group K) Material: coated carbide Series: Tiger·tec Silver FAQ Is this insert suitable for cast iron turning? Yes. The DNMG150408-MK5 WKK10S is specifically designed for ISO group K (cast iron) machining and uses the Tiger·tec Silver grade for improved abrasion resistance. What does the MK5 chipbreaker do? The MK5 chipbreaker on this insert controls chip formation in brittle materials, producing short, manageable chips that support process security and reduce the risk of chip-related interruptions. What are the key geometric features to consider? The Rhombus 55° plate form, 0° relief angle and 0.8 mm corner radius provide a balance of versatility, edge strength and stable contact for various turning tasks in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150408-MK5 WKK20S Wendeplatten - Walter Tools
Efficient cast-iron turning with a robust edge and controlled chip formation is achieved by combining the Tiger·tec Silver coating, the MK5 chipbreaker and a 0.8 mm corner radius; order the insert directly via Metav Werkzeuge or consult our technical team for process integration. DNMG150408-MK5 WKK20S indexable turning insert — Tiger·tec Silver coating, for cast iron | Walter Tools DNMG150408-MK5 WKK20S is an indexable turning insert designed for productive machining of cast iron components, offering a coated carbide grade tuned to resist abrasive wear and deliver consistent cutting performance. Tiger·tec Silver coated carbide grade WKK20S Optimised for cast iron machining MK5 chipbreaker for reliable chip control Rhombus 55° geometry, 0.8 mm corner radius High-performance coating for abrasive cast-iron conditions The combination of the Tiger·tec Silver coating and the WKK20S grade provides enhanced resistance to abrasive wear typical of cast-iron machining. The coated carbide substrate keeps the cutting edge stable under interrupted cuts and elevated temperatures, which translates into longer tool life and fewer indexings. For production environments that prioritise consistent throughput, this insert reduces unplanned downtime by maintaining cutting performance across multiple workpieces, supporting efficient batch processing and predictable machining cycles. Precise chip control and cutting-edge geometry for better surface quality Engineered with the MK5 chipbreaker and a rhombus 55° geometry, the insert promotes controlled chip formation and safe chip evacuation. The 0.8 mm corner radius helps to distribute cutting forces and improves edge strength, resulting in more stable cuts and a finer surface finish on the workpiece. The 0° negative rake increases robustness of the cutting edge, making the insert suitable for heavier cuts and interrupted surfaces. These features together enhance process reliability and reduce the need for secondary finishing operations. Practical use in production: compatibility and process benefits This indexable insert is primarily intended for cast iron applications (material group K) and integrates easily into standard toolholders that accept DNMG geometry. The combination of coated carbide and the MK5 chipbreaker supports repeatable performance in serial production, contributing to cost-efficiency through fewer tool changes and predictable tool-life cycles. As a product from Walter Tools’ Tiger·tec Silver series, it offers proven industrial quality and is suitable for workshops and production lines seeking stable, productive turning of abrasive cast-iron components. Contact Metav Werkzeuge for tailored recommendations on integrating this Walter Tools Tiger·tec Silver insert into production processes — Metav Werkzeuge can advise on holder compatibility and batch supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: DNMG150408-MK5-WKK20S-WALTER Designation: DNMG150408-MK5 WKK20S Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Execution: G Numbers / Core technical data Plate size: 15 mm Corner radius: 0.8 mm Plate thickness: 4 mm Cutting edge angle: 55° Rake angle: 0° (negative) Tolerance class: M Special features / Materials Coating: Tiger·tec Silver Chipbreaker: MK5 Material: Coated carbide Suitable for: Cast iron (K) Plate form: Rhombus 55° Application: Turning FAQ What materials is this insert intended for? This DNMG150408-MK5 WKK20S insert from Walter Tools is designed primarily for machining cast iron (material group K), where its coating and grade offer improved wear resistance. How does the MK5 chipbreaker affect performance? The MK5 chipbreaker on the insert ensures controlled chip formation and reliable evacuation, reducing the risk of build-up and improving process stability during turning. Is the geometry suitable for interrupted cuts? Yes, the combination of a 0° negative rake and a 0.8 mm corner radius gives the insert increased edge robustness, making it suitable for interrupted and heavy cutting conditions. Can this insert be used in standard DNMG toolholders? The insert follows the DNMG150408 designation and fits toolholders compatible with DNMG geometry, enabling straightforward integration into existing turning setups. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and thermal stability of the cutting edge, which helps to prolong tool life and maintain consistent machining quality on abrasive materials such as cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory-new product of the manufacturer.
DNMG150408-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and MM5 chipbreaker for consistent chip control and extended edge life in stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. DNMG150408-MM5 WMP20G turning insert — Tiger·tec Gold coated, for stainless steel | Walter Tools The DNMG150408-MM5 WMP20G is a rhombic 55° turning insert designed for reliable machining of stainless steels under medium to robust cutting conditions. Tiger·tec Gold coating for heat resistance MM5 chipbreaker for controlled chips Rhombic 55° form for versatile turning Negative 0° relief for stable cutting Stable cutting in stainless-steel applications The combination of the Tiger·tec Gold coating and a coated carbide substrate provides improved thermal stability and wear resistance, which directly benefits machining of stainless steel (ISO group M). The specialised MM5 chipbreaker supports predictable chip formation even when the material exhibits toughness and a tendency to form built-up edge. These design choices reduce unplanned downtime and contribute to a steadier surface finish, meaning fewer rework cycles and more consistent throughput in production environments. Geometry engineered for repeatability and edge life The rhombic 55° insert geometry with a 0° (negative) relief and a 0.8 mm corner radius combines rigidity with controlled cutting action. This geometry supports stable cutting forces and a robust cutting edge, which helps maintain dimensional accuracy across repeat operations. The insert thickness (04) and the DNMG format offer secure clamping and thermal mass, contributing to predictable tool life and repeatable turning performance on medium to heavy duty operations. Productivity and process reliability for demanding conditions Designed as part of the Tiger·tec Gold series and specified for stainless-steel machining, this turning grade is optimised for medium to robust conditions where both stable chip control and reliable edge retention are required. The grade WMP20G is a coated carbide developed to handle heat and adhesion challenges typical of these materials. The result is a cost-efficient solution for batch production and single-pass roughing where consistent quality and process safety are priorities. For precision stainless-steel turning with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for expert guidance or to request purchasing support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG150408-MM5-WMP20G-WALTER Designation: DNMG150408-MM5 WMP20G Series: Tiger·tec Gold Grade: WMP20G Facts Insert shape: Rhombus 55° Insert size: 15 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Chipbreaker: MM5 Special features Coating: Tiger·tec Gold (coated carbide) Applicable material group: stainless steel (M) Tolerance class: M Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The DNMG150408-MM5 WMP20G insert is specified for stainless steel (ISO group M) and is optimised to manage the toughness and heat characteristics associated with these alloys. How does the MM5 chipbreaker improve machining? The MM5 chipbreaker on the WMP20G grade promotes controlled chip formation and evacuation, enhancing process stability and reducing the risk of built-up edge during stainless-steel turning. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases thermal resistance and wear protection, which contributes to longer edge life and consistent cutting performance under elevated cutting temperatures. Is the DNMG15 format suitable for heavy-duty turning? Yes, the DNMG150408 format with a 0° negative relief and robust thickness offers the rigidity and clamping stability required for medium to robust turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation or partnership between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of Walter Tools.
DNMG150408-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, the MM5 chipbreaker for stable chip formation, and a 0° negative rake for robust stainless steel turning; order through Metav Werkzeuge or request process advice from our consultants. DNMG150408-MM5 WMP20S indexable turning insert for stainless steel — Walter Tools The DNMG150408-MM5 WMP20S is an indexable turning insert engineered for reliable machining of rostfreier Stahl, combining a Tiger·tec Silver coating with an MM5 chipbreaker for consistent chip control and surface quality. Tiger·tec Silver coating for wear resistance MM5 chipbreaker for controlled chip formation 0° negative rake for robust cutting Optimised for rostfreier Stahl machining Precision and wear resistance for demanding stainless steel turning The coated carbide grade from the Tiger·tec Silver family delivers enhanced wear resistance and improved thermochemical stability in the face of stainless steel’s tendency to work-harden and generate heat. Thanks to the tailored coating and substrate combination, the insert sustains a stable cutting edge under medium to heavy cutting conditions, which supports longer tool life and fewer interruptions for tool change. The described combination reduces flank wear and helps maintain dimensional stability over longer production runs, increasing process reliability and productivity. Controlled chips and consistent surface finish Integrated MM5 chipbreaking geometry is designed to fragment and evacuate chips efficiently during turning of rostfreier Stahl, lowering the risk of built-up edge and uneven surfaces. The insert’s corner radius 0.8 mm balances edge strength with the ability to achieve good surface quality on turned components. The combination of chip control and corner geometry contributes to predictable results in automated and semi-automated turning operations, improving cycle times and reducing rework. Robust geometry that supports stable cutting conditions A 0° (negative) rake angle and the rhombic 55° insert form deliver mechanical robustness in interrupted cuts and heavier cross-sections. The insert’s geometry, together with the coated grade, enables secure cutting under varied feed and depth-of-cut settings, making the solution suitable for general stainless-steel turning where edge stability is a priority. Clear labelling and ISO designation facilitate quick tool selection and repeatability in production environments. Application advice and integration into production This indexable solution is particularly suited to applications where rostfreier Stahl is the primary material group and where process security and repeatable surface integrity matter. For initial parameter selection, moderate cutting speeds with adequate coolant or appropriate lubrication help to control temperatures and support chip control. The insert works well in standard tool holders compatible with the DNMG form and benefits from consistent clamp and seat conditions to exploit the full potential of the Tiger·tec Silver coating. Contact Metav Werkzeuge for tailored process advice and ordering of Walter Tools DNMG150408-MM5 WMP20S indexable turning inserts featuring Tiger·tec Silver technology Technical data Article number: DNMG150408-MM5-WMP20S-WALTER Designation: DNMG150408-MM5 WMP20S Product type: indexable turning insert (Drehwendeschneidplatte) Series: Tiger-tec Silver Grade: WMP20S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free cutting angle: 0° (negative) Inscribed circle / size: 15 mm Thickness designation: 04 Tolerance class: M Special features Chipbreaker: MM5 Plate form: Rhombus 55° Coating technology: Tiger·tec Silver (coated carbide) Material application: rostfreier Stahl Execution: G FAQ What materials is this insert intended for? The DNMG150408-MM5 WMP20S insert is designed specifically for machining rostfreier Stahl and is optimised for the challenges of stainless-steel turning. How does the MM5 chipbreaker improve performance? The MM5 chipbreaker on the WMP20S grade promotes controlled chip fragmentation and evacuation, which reduces built-up edge and supports a consistent surface finish during stainless-steel turning. Can the insert be used for heavy interrupted cuts? Yes. The 0° negative rake and robust rhombus 55° geometry provide mechanical strength suitable for interrupted cuts and demanding turning conditions when using the DNMG150408-MM5 WMP20S insert. Which series provides the coating and substrate properties? The insert belongs to the Tiger·tec Silver series; this coating and substrate combination enhances wear resistance and thermal stability during turning of rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150408-MM5 WMP30G WMP30G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WMP30G grade for reliable machining of rostfreier Stahl; the rhombic 55° form and 0.8 mm corner radius support consistent surface quality and stable cutting. Order directly via Metav Werkzeuge or contact our consultants for tailored process advice. DNMG150408-MM5 WMP30G – Indexable turning insert, Tiger‑tec Gold for rostfreier Stahl (Walter Tools) DNMG150408-MM5 WMP30G is a rhombic 55° indexable insert from Walter Tools, optimised for reliable turning of rostfreier Stahl under medium to robust cutting conditions Tiger‑tec Gold coated grade WMP30G Optimised for rostfreier Stahl (ISO M) Rhombic 55° form, 0.8 mm corner radius Negative 0° rake for stable cutting High-performance machining for rostfreier Stahl The Tiger‑tec Gold coating and the WMP30G carbide grade are engineered to address the typical challenges of machining rostfreier Stahl: tendency to work‑harden, sticky chips and thermal concentration. This combination promotes a stable cutting edge and improved chip control, which reduces unplanned downtime and helps maintain consistent component tolerances. The optimized grade supports secure chip evacuation under medium to robust cutting parameters, which in turn contributes to predictable tool life and fewer insert changes. Edge security and dimensional stability for productive turning The insert’s negative 0° rake and 0.8 mm corner radius provide a robust cutting geometry that resists edge chipping during interrupted cuts and higher feed conditions. Together with the MM5 chipbreaker, the geometry promotes short, controllable chips and reduces the risk of built up edge on the cutting face. For production environments that demand repeatability, these design choices translate into steady process behaviour, reduced scrap rates and improved surface finishes on turned components made from rostfreier Stahl. Workshop efficiency and handling benefits The rhombic 55° insert form offers good approach angles for a range of turning operations, while the standard DNMG size ensures compatibility with many toolholders. The plate’s designation and solid indexable format simplify changeover and inventory management; fewer specialised tools are required to cover common rostfrei operations. In practice, this means more uptime and easier scheduling of maintenance intervals, supporting efficient throughput in small to medium batch production. For tailored process recommendations on the Tiger‑tec Gold WMP30G grade and rapid supply via Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150408-MM5-WMP30G-WALTER Label: Drehwendeschneidplatte DNMG150408-MM5 WMP30G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Facts Plate size: 15 Plate thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Special features Grade: WMP30G Series: Tiger‑tec Gold Chipbreaker: MM5 Form: Rhombus 55° Execution: G Tolerance class: M Material application: rostfreier Stahl FAQ What materials is this insert intended for? The DNMG150408-MM5 WMP30G insert is specified for rostfreier Stahl (ISO M), offering reliable performance on a wide range of corrosion‑resistant steels. How does the Tiger‑tec Gold coating benefit turning performance? The Tiger‑tec Gold coating on the WMP30G grade enhances thermal resistance and reduces friction, which improves edge life and surface quality when machining rostfreier Stahl. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge robustness and supports stable dimensional results under higher feed rates, reducing the likelihood of edge chipping during tougher cuts. Is the negative 0° rake suitable for roughing applications? Yes, the negative 0° rake combined with the MM5 chipbreaker provides a durable cutting geometry that performs well in medium to robust roughing operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Where applicable, the brand Walter Tools is mentioned for clarification purposes only. There is no affiliation between our company and the named brands. The offered article is original factory‑new goods from the manufacturer.
DNMG150408-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
High-performance coated insert combining the heat-resistant Tiger·tec Silver grade with the WSM10S cutting material for secure chip control and a stable cutting edge; ideal for demanding turning of stainless steel and heat‑resistant alloys. Order the DNMG150408-MM5 WSM10S directly via Metav Werkzeuge or consult the advisers for cutting data and application support. DNMG150408-MM5 WSM10S turning insert (Tiger·tec Silver) by Walter Tools — 0° negative rake, 0.8 mm nose radius The DNMG150408-MM5 WSM10S is a coated carbide turning insert designed for robust, repeatable machining of stainless steel and high‑temperature alloys, featuring a rhombic 55° form and an optimised MM5 chipbreaker for secure chip control Tiger·tec Silver coating for heat resistance and wear control MM5 chipbreaker for stable chip formation Negative 0° rake for robust cutting behaviour 0.8 mm nose radius for repeatable profiles Increased process reliability through coating and grade performance The combination of the Tiger·tec Silver coating and the WSM10S grade delivers higher thermal stability and improved edge life when machining difficult materials. Coating technology reduces adhesion and lowers thermal load at the cutting edge, which supports a stable cutting edge during longer cycles. For production environments this results in fewer tool changes and more predictable tool life, enhancing throughput and lowering downtime. The coated carbide substrate is optimised for materials that tend to work‑harden, so cutting data can be pushed safely while maintaining component quality. Clear advantages in chip control and geometry for demanding materials The insert’s MM5 chipbreaker geometry is engineered to promote predictable chip breakage and evacuation when turning stainless steel and heat‑resistant superalloys. Combined with the negative 0° rake, this geometry increases cutting edge strength and reduces the risk of build‑up, making the insert suitable for interrupted cuts and tougher workpiece conditions. The 0.8 mm nose radius gives a reliable surface finish and maintains dimensional repeatability across medium to heavy roughing passes, reducing the need for subsequent finishing in many workflows. Application focus and recommended use cases This insert is intended for operations where material behaviour and thermal stress challenge conventional grades — notably stainless steel and alloys covered by ISO groups S and M. The geometry and coating are particularly beneficial in turning operations that require a balance of edge stability and chip management, such as roughing followed by semi‑finishing of shafts and turned components. For new applications, it is recommended to validate cutting parameters on trial parts to determine optimal speeds and feeds; reference cutting data for the Tiger·tec Silver family can be requested for process planning. Contact Metav Werkzeuge today for tailored cutting data, availability and to order genuine Walter Tools DNMG150408-MM5 WSM10S inserts from stock Technical Data Article number: DNMG150408-MM5-WSM10S-WALTER SKU: DNMG150408-MM5-WSM10S-WALTER Product type: Drehwendeschneidplatte / Turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Execution: G Core data Insert size (inscribed circle): 15 mm Nose radius: 0.8 mm Thickness: 4 mm (designation 04) Rake angle: 0° (negative) Shape: Rhombic 55° Tolerance class: M Chipbreaker: MM5 Designation: DNMG150408-MM5 WSM10S Special features Coating: Tiger·tec Silver (coated carbide) Material compatibility: stainless steel; suitable for ISO groups S and M Optimised for stable chip formation and edge retention Designed for demanding turning and high thermal loads Brand: Walter Tools FAQ What materials is this insert suited for? The DNMG150408-MM5 WSM10S insert is designed primarily for stainless steel and heat‑resistant alloys classified under ISO groups S and M. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces thermal load and adhesion at the cutting edge, extending the edge life of the WSM10S grade and supporting more consistent machining results. Which machining operations benefit most from this geometry? Roughing and semi‑finishing operations with challenging chip control requirements gain the most, particularly where interrupted cuts or high temperatures occur. Is the negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases edge strength and is well suited to interrupted cuts and heavy engagement conditions. How does the MM5 chipbreaker affect surface finish? The MM5 chipbreaker promotes reliable chip formation while the 0.8 mm nose radius helps achieve repeatable surface quality, often reducing the need for secondary finishing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coated grade and a precise rhombic 55° geometry to achieve stable edge life and reliable performance when machining demanding materials; order the DNMG150408‑MM5 WSM20S indexable insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150408-MM5 WSM20S turning indexable insert, Tiger·tec Silver (rostfreier Stahl & superalloys) — Walter Tools A DNMG150408‑MM5 WSM20S turning insert engineered for secure, repeatable machining of rostfreier Stahl and heat‑resistant superalloys with a coated carbide grade designed for high thermal and mechanical loads Tiger·tec Silver coated carbide grade WSM20S Optimised for rostfreier Stahl and superalloys Rhombic 55° insert with 0.8 mm corner radius Negative rake geometry with MM5 chipbreaker Consistent process security for demanding alloys The combination of the Tiger·tec Silver coating and the WSM20S grade produces a tool substrate that resists thermal and mechanical wear, delivering measurable improvements in process security when turning tough materials such as rostfreier Stahl and high‑temperature alloys. Coating technology reduces flank wear and supports stable cutting‑edge performance, which in practice means fewer tool changes and a smoother production flow. This rational advantage translates into higher machine uptime and more predictable component quality. Predictable chip control and improved surface quality Equipped with the MM5 chipbreaker and a negative rake design, the insert promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and erratic chips that can damage both component and tool. Controlled chips contribute directly to a superior surface finish and safer machining in interrupted or continuous cuts. For operations where consistent component geometry and finish are essential, the chip management features offer a clear performance benefit that supports efficient downstream processes. Geometry optimised for turning versatility The rhombic 55° form with a 0.8 mm corner radius balances versatility and strength: the angle allows for a range of approach angles and turning operations, while the modest corner radius supports edge robustness without sacrificing detail on smaller profiles. As an indexable insert, the component is straightforward to mount and index, enabling rapid replacement and predictable tolerance control under standard clamping systems. The design therefore suits mixed‑batch production where flexibility and repeatability are both required. Practical advantages for production planning Tolerance class M and the coded thickness and size make the insert straightforward to specify in procurement and tooling lists; the coated grade is particularly suited to applications where heat generation and adhesion risks are high. Selection of cutting speeds and feeds should reflect the workpiece material group (M and S according to ISO), but the core benefit remains: enhanced tool life and constant results across runs. For shops seeking to standardise on reliable turning solutions, this insert offers an efficient, production‑oriented option. For application recommendations and to secure Walter Tools DNMG150408‑MM5 WSM20S inserts for rostfreier Stahl and superalloy tasks, contact Metav Werkzeuge for expert guidance and fast supply. Technical data Article number: DNMG150408-MM5-WSM20S-WALTER Item label: Drehwendeschneidplatte DNMG150408-MM5 WSM20S Walter Tools Manufacturer: Walter Tools Facts Insert shape: Rhombus 55° Corner radius: 0.8 mm Insert size: 15 Thickness code: 04 Rake angle: 0° (negative) Special features Grade/series: WSM20S, Tiger‑tec Silver Chipbreaker: MM5 Material suitability: S / M (superalloys, rostfreier Stahl) Tolerance class: M Execution: G ISO designation: DNMG150408‑MM5 WSM20S FAQ Which materials can be machined with this insert? The DNMG150408‑MM5 WSM20S insert is designed for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), offering reliable performance where heat and adhesion are common challenges. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance and reduces flank wear, helping the insert maintain a stable cutting edge and longer service life under demanding cutting conditions. How does the MM5 chipbreaker influence machining? The MM5 chipbreaker promotes consistent chip formation and evacuation, which improves chip control and contributes to a better surface finish while lowering the risk of built‑up edge. What does the negative rake geometry mean in practice? A negative rake angle enhances edge strength and is advantageous in heavy‑duty or interrupted cuts, providing a robust cutting edge that tolerates higher mechanical loads without premature chipping. Is the corner radius suitable for profile accuracy? The 0.8 mm corner radius represents a compromise between edge strength and profile detail, enabling good repeatability while still allowing reasonably fine turning features. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for clarification of product origin; there is no affiliation implied between our company and the trademark owners. The offered item is an original, factory‑new product of the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com