DNMG150408-NMT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the WSM20S grade and Tiger·tec Silver coating for secure chip control and extended edge life in tough materials; the combination of a rhombic 55° geometry with 0.8 mm corner radius ensures stable cutting in stainless steels and superalloys. Order the insert directly via Metav Werkzeuge or consult the technical team for process optimisation. DNMG150408-NMT WSM20S indexable turning insert — Tiger·tec Silver for stainless steels | Walter Tools A DNMG150408-NMT WSM20S indexable turning insert engineered for demanding turning of stainless steels and heat‑resistant superalloys, providing consistent chip control and robust edge stability. Tiger·tec Silver coated grade WSM20S Specifically for stainless steels and superalloys Rhombic 55° geometry with 0.8 mm corner radius Negative 0° rake, stable edge performance High reliability for challenging materials The DNMG150408-NMT WSM20S insert combines a resilient grade with a performance coating to deliver stable chip formation and reduced flank wear when machining stainless steels and heat‑resistant alloys. The design targets applications where material toughness and heat generation compromise tool life; by favouring edge robustness and consistent chip flow, the insert supports uninterrupted production and predictable tool change intervals. This results in better process planning and less scrap from built‑up edge or irregular cutting. Coating and grade that extend edge life The Tiger·tec Silver coating together with the WSM20S cemented carbide formulation enhances thermal resistance and wear behaviour, which is particularly relevant for materials that tend to work‑harden or generate high temperatures. The coating reduces friction at the cutting zone and improves resistance to abrasive and adhesive wear, translating into longer effective cutting life and fewer in‑cycle adjustments. For operations where repeatability matters, the improved wear resistance helps maintain dimensional accuracy over multiple components. Geometry and chip control for process security The rhombic 55° form, combined with the NMT chipbreaker and 0.8 mm corner radius, offers a balance between strength and cutting engagement. The negative 0° rake increases edge strength for interrupted cuts and heavy cross‑sections, while the chipbreaker promotes reliable evacuation of chips even under variable feed conditions. Together these elements lower the likelihood of chatter and edge failure, improving surface finish stability and reducing unscheduled downtime in serial turning operations. Application guidance and operational benefits Designed for turning operations where material grades fall into ISO groups M and S, this insert is suited for workpieces that demand thermal stability and controlled chip behaviour. The tolerance class M indicates consistent manufacturing precision, supporting reproducible part quality. For production managers and tool planners, the key benefits are improved process security and extended indexable insert intervals, which contribute to higher overall equipment effectiveness and reduced tooling overhead. For specific machining parameters and to match insert geometry with holder selection, technical consultation is available to tailor the solution to the machining centre and workpiece material. Discuss Tiger·tec Silver inserts with Metav Werkzeuge for tailored machining recommendations and order support — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150408-NMT-WSM20S-WALTER Designation: DNMG150408-NMT WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Key dimensions Size code: 15 Corner radius: 0.8 mm Thickness code: 04 Clearance angle: 0° (negative) Tolerance class: M Features Grade: WSM20S Coating: Tiger·tec Silver Chipbreaker: NMT Geometry: Rhombus 55° Material suitability: Stainless steels (ISO group M), Superalloys / heat‑resistant alloys (ISO group S) FAQ What materials is this insert best suited for? The DNMG150408-NMT WSM20S insert is optimised for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S), offering chip control and edge stability for these challenging materials. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating improves thermal resistance and wear behaviour on the WSM20S grade, which helps extend cutting edge life and maintain surface quality during prolonged turning cycles. What is the purpose of the NMT chipbreaker? The NMT chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and supporting consistent machining performance with the rhombic geometry. Which geometry and corner radius are provided and why do they matter? The insert has a rhombic 55° geometry with a 0.8 mm corner radius; this combination offers a compromise between edge strength and cutting engagement, suitable for stable turning in tough materials. Is this insert suitable for interrupted cuts or heavy cross‑sections? Yes, the negative 0° rake and robust grade of the WSM20S insert are designed to withstand interrupted cuts and heavier engagements, improving resistance to edge chipping. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150408-NRS WSM10 WSM10 Wendeplatten - Walter Tools
Taking advantage of the WSM10 coating and the NRS chipbreaker ensures reliable chip control and stable cutting edges when machining stainless steels and heat-resistant superalloys; the combination of a 0° negative rake and a 0.8 mm corner radius delivers robustness for heavy turning operations. Order the insert via Metav Werkzeuge or request personalised advice from the consultants if needed. DNMG150408-NRS WSM10 – Turning indexable insert, 0° negative rake, 0.8 mm corner radius | Walter Tools A DNMG150408-NRS WSM10 turning insert engineered for secure chip control and durable edge performance in demanding stainless-steel and superalloy turning applications Robust NRS chipbreaker for reliable chip control 0° negative rake for heavy cuts 0.8 mm corner radius for consistent edge strength Suitable for stainless steel and superalloys Increased process reliability for difficult-to-cut materials The WSM10 grade is a coated carbide composition optimised for materials in the ISO M and S groups, primarily stainless steels and heat-resistant superalloys. Its formulation prioritises thermal stability and edge integrity, reducing the risk of built-up edge formation during prolonged contact with hot, adhesive workpieces. As a result, the insert offers improved tool life and a more predictable wear pattern, which supports consistent cycle times and fewer unplanned tool changes—an advantage for batch production and continuous turning operations. Geometry tuned for heavy turning and predictable surface finish The rhombic 55° shape combined with a 0° negative rake and 0.8 mm corner radius gives a balance between strength and accessibility for a variety of turning tasks. The NRS chipbreaker is designed to form and evacuate chips reliably under the cutting conditions typical for stainless steels and superalloys, reducing re-cutting and surface damage. The insert thickness and tolerance class M contribute to stable clamping and repeatable performance in standard indexable-holding systems, supporting both roughing and medium-finishing passes without compromising edge security. Practical benefits for shop-floor productivity Integrating this insert into turning tool assemblies enhances process stability and reduces intervention frequency. The combination of the WSM10 coating and the NRS geometry decreases tool wear rates under thermally aggressive cutting, which lowers tooling costs per component and shortens downtime for tool changes. Compatibility with common DNMG toolholders and the open series designation supports easy inventory management and quick replacement, helping to keep production flowing with minimal adjustment. The Walter Tools pedigree signals a product engineered for industrial demands and repeatable results. For high-process reliability with stainless steels and superalloys, request a technical consultation or order the DNMG150408-NRS WSM10 insert through Metav Werkzeuge—contact Metav Werkzeuge at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: DNMG150408-NRS-WSM10-WALTER Designation: DNMG150408-NRS WSM10 Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert size: 15 Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness: 04 Tolerance class: M Special features Coated carbide grade: WSM10 (Walter Schneidstoffsorte - Serie offen) Chipbreaker: NRS Insert shape: Rhombus 55° Application groups: S / M (superalloys and stainless steels) Execution: G Series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suitable for? The DNMG150408-NRS WSM10 insert is specified for ISO groups M and S, making it suitable for stainless steels and heat-resistant superalloys when using appropriate cutting data. How does the NRS chipbreaker help in practice? The NRS chipbreaker on this Walter Tools insert improves chip control and evacuation, reducing the risk of re-cutting and helping to maintain surface quality during heavy turning operations. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG150408-NRS WSM10 follows the DNMG geometry and tolerance class M, ensuring compatibility with common DNMG turning toolholders for secure clamping and repeatable indexing. Which cutting conditions benefit most from the WSM10 grade? The WSM10 coated carbide grade is optimised for thermally demanding conditions and materials that promote built-up edge; it performs well in medium to heavy cutting where thermal and mechanical stresses are high. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, brand-new goods supplied by the manufacturer.
DNMG150408-NRS WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver thermal stability, a reliable NRS chipbreaker and a robust 0.8 mm corner radius for stable machining of stainless steel and heat-resistant alloys; order the insert directly via Metav Werkzeuge or contact our consultants for application advice DNMG150408-NRS WSM10S Drehwendeschneidplatte — robust Tiger·tec Silver grade for stainless steel and superalloy turning (Walter Tools) The DNMG150408-NRS WSM10S is a rhombic 55° turning insert designed for demanding machining of stainless steel and heat-resistant superalloys, offering a coated carbide grade optimised for secure chip formation and durable cutting edges Tiger·tec Silver coated carbide NRS chipbreaker for secure chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius for long cutting life Thermal stability and grade benefits that reduce tool failures The combination of Tiger·tec Silver coating and the WSM10S grade provides enhanced resistance to thermal loads and abrasive wear, which directly reduces edge breakdown during interrupted cuts or high-temperature conditions. For machining stainless steel and nickel-based alloys, the coating supports a stable cutting edge and improved heat management; this minimises the tendency for built-up edge and helps maintain surface finish consistency over longer tool life. The result is fewer tool changes and more predictable production cycles, which increases process uptime. Reliable chip control and process security with NRS geometry The NRS chipbreaker is engineered to produce short, manageable chips when turning ductile and heat-prone materials. Combined with the 0° negative rake, this geometry improves cutting-edge stability under heavy engagement and supports consistent chip evacuation. For production environments where reproducible cycles matter, this insert reduces the risk of chip-related interruptions and protects the workpiece from damage. If further machining parameters are required for a specific stainless steel grade, Metav Werkzeuge can provide tailored cutting data and guidance. Geometry and tolerance that support versatile turning strategies The rhombic 55° form and a 0.8 mm corner radius balance strength and accessibility for a wide range of external turning operations. The inscribed size of 15 and thickness code 04 deliver a compact yet sturdy profile suitable for finishing and medium-depth machining. Tolerance class M ensures consistent interchangeability and reliable seating in standard toolholders, simplifying tool management across toolrooms. This geometry is particularly effective when seeking a compromise between edge strength and the ability to achieve fine surface quality. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts and to discuss cutting trials or parameter optimisation Technical data Article number: DNMG150408-NRS-WSM10S-WALTER SKU: DNMG150408-NRS-WSM10S-WALTER Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Inscribed circle / size: 15 Corner radius: 0.8 mm Shape: Rhombus 55° Free angle: 0° (negative) Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: NRS Recommended for: stainless steel (ISO group M) Also suitable for: heat-resistant superalloys and titanium (ISO group S) Design execution: G FAQ Which materials is this insert best suited for? The DNMG150408-NRS WSM10S insert from Walter Tools is optimised for stainless steel and is also suitable for machining heat-resistant superalloys and titanium, reflecting the intended ISO material groups M and S. What advantage does the Tiger·tec Silver coating bring? The Tiger·tec Silver coating increases thermal resistance and wear protection, helping the WSM10S grade maintain a stable cutting edge and longer life when machining difficult-to-cut materials. How does the NRS chipbreaker affect performance? The NRS chipbreaker promotes short, controlled chips and consistent evacuation, improving process security and reducing the risk of chip-related interruptions in turning operations. Is the insert compatible with standard toolholders for DNMG geometry? Yes, the rhombic 55° form and tolerance class M ensure interchangeability with conventional DNMG toolholders; the thickness code and size follow established insert conventions. When should a 0.8 mm corner radius be preferred? A 0.8 mm corner radius is recommended when a balance between edge strength and fine surface finish is required, suitable for finishing and medium metal removal rates on stainless steel and similar alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The offered item is original, brand-new goods of the manufacturer (Walter Tools).
DNMG150408-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the robust 0.8 mm corner radius for stable, repeatable performance when machining stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for cutting data. DNMG150408-NRS WSM20S turning insert — Tiger·tec Silver, 0° negative rake (Walter Tools) DNMG150408-NRS WSM20S is a rhombic 55° indexable turning insert engineered for controlled chip formation and reliable edge stability when machining stainless steel and high-temperature alloys. DNMG150408-NRS form, rhombic 55° geometry Tiger·tec Silver coated carbide grade WSM20S 0° negative rake for stable cutting 0.8 mm corner radius for robust edges Secure chip control for demanding materials The combination of the NRS chipbreaker and the Tiger·tec Silver coating delivers consistent chip breaking and reduced built-up edge in challenging cuts. Designed primarily for ISO groups M (stainless steel) and S (heat-resistant superalloys and titanium), this insert provides a reliable solution where temperature and adhesive wear are critical. The coated carbide structure of the grade WSM20S supports a secure cutting geometry, which reduces interruptions for tool changes and increases effective machining uptime while maintaining surface quality. Geometry and edge strength that extend tool life A rhombic 55° form with a 0° negative rake and 0.8 mm corner radius provides a compromise between edge strength and accessibility in a wide range of turning operations. These features result in improved corner stability and resistance to chipping during interrupted cuts. As a result, the indexable insert offers predictable wear progression and repeatable part tolerances, supporting efficient production runs and lower overall tooling cost per component through extended edge life. Application guidance for optimal results The insert is suited to workpieces that require secure heat handling and stable cutting edges, notably stainless steel and heat-resistant alloys. When selecting cutting parameters, consider the insert geometry and chipbreaker: moderate feeds combined with cutting speeds adapted for coated carbide grades typically yield the best balance of tool life and surface finish. For specialised process recommendations and parameter maps for specific steels and superalloys, consult Metav Werkzeuge’s application engineers who can advise on grade selection and machining strategy to achieve consistent productivity. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools' DNMG150408-NRS WSM20S insert — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to request detailed process sheets and compatibility suggestions Technical data Article number: DNMG150408-NRS-WSM20S-WALTER Description: Drehwendeschneidplatte / turning insert Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Insert size: 15 mm Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Rhombus 55° Special features Coating: Tiger·tec Silver Material: coated carbide (WSM20S) Chipbreaker: NRS Geometry: rhombic 55°, negative rake Application: stainless steel (ISO M), Superalloys / Titanium (ISO S) FAQ What materials is this insert suitable for? The DNMG150408-NRS WSM20S insert is suitable for stainless steel (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), reflecting the design focus of the Tiger·tec Silver grade. How does the NRS chipbreaker affect machining? The NRS chipbreaker on this Walter Tools insert promotes controlled chip formation and reduces the risk of built-up edge, improving surface finish and process stability during continuous and interrupted turning. Can this insert be used for interrupted cuts? Yes, the combination of the 0.8 mm corner radius and the 0° negative rake provides enhanced edge strength, making the insert appropriate for many interrupted cutting scenarios when using the correct parameters. Is the coating beneficial for high-temperature workpieces? The Tiger·tec Silver coating applied to the WSM20S grade increases thermal resistance and wear protection, which is advantageous when machining materials that generate high cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and product designations are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
DNMG150408-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and an optimised RM5 chipbreaker for consistent productivity when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our technical team for application advice. DNMG150408‑RM5 WMP20G indexable insert, Tiger‑tec Gold coating — for rostfreier Stahl | Walter Tools DNMG150408‑RM5 WMP20G is a rhombic 55° turning insert engineered for secure chip control and stable cutting in rostfreier Stahl under moderate to robust conditions Tiger‑tec Gold coating for long tool life Optimised RM5 chipbreaker for stable chips Designed for rostfreier Stahl machining Rhombic 55° form with 0.8 mm corner radius High-performance coating and measurable economy The combination of Tiger‑tec Gold and the WMP20G cutting grade delivers a measurable improvement in process robustness. The coated carbide formulation reduces flank wear and supports longer tool life, which translates into fewer tool changes and higher uptime on the shop floor. This advantage is particularly relevant in serial production where reduced interruptions improve overall efficiency. Chip control that safeguards surface quality and productivity Machining rostfreier Stahl can cause built-up edge and difficult chips; the RM5 chipbreaker and the insert’s geometry provide consistent chip formation and evacuation. Consistent chips reduce the need for manual intervention and help maintain the achieved surface finish, so cycle times stay predictable and scrap rates fall. The result is a stable turning process with enhanced component repeatability. Geometry tailored for secure engagement and tool life The rhombic 55° shape, 0.8 mm corner radius and negative 0° rake combine to give a robust cutting edge that resists chipping under interrupted cuts and tougher workpiece conditions. This geometry supports reliable edge stability when cutting sticky or work-hardening rostfreier Stahl, making the insert suitable for both roughing and mixed finishing tasks in demanding production environments. Compatibility, handling and selection guidance for workshops The insert is supplied in the DNMG size and thickness series common to toolholders used across turning platforms, simplifying tool change and inventory management. As a coated WMP20G grade from Walter Tools, it balances wear resistance and toughness for middle to heavy conditions. For specification matching or toolholder recommendations, the product data and Metav Werkzeuge consultants can assist to ensure the correct cutter and cutting data are chosen for the intended application. Contact Metav Werkzeuge to specify Tiger‑tec Gold WMP20G inserts for rostfreier Stahl applications and benefit from tailored cutting data and stock availability. Technical data SKU: DNMG150408‑RM5‑WMP20G‑WALTER Designation: DNMG150408‑RM5 Full marking: DNMG150408‑RM5 WMP20G Brand: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Facts Plate form: Rhombus 55° Plate size: 15 mm Plate thickness: 04 Corner radius: 0.8 mm Rake: 0° (negative) Chipbreaker: RM5 Grade: WMP20G Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Material suitability: rostfreier Stahl Application: medium to robust machining conditions Geometry: robust edge for interrupted cuts and secure cutting Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The DNMG150408‑RM5 WMP20G insert from Walter Tools is intended primarily for machining rostfreier Stahl and performs well under medium to robust cutting conditions. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on this indexable insert improves chip control, reducing built‑up edge and aiding chip evacuation, which helps maintain surface quality and process stability. Can the insert handle interrupted cuts? Yes, the rhombic 55° form with a 0.8 mm corner radius and negative geometry provides a robust cutting edge suited to interrupted cuts and varying engagement. Is the WMP20G grade suitable for finishing operations? WMP20G is a balanced, coated grade that supports both productive roughing and mixed finishing in rostfreier Stahl applications, depending on cutting data and machine setup. What series does this insert belong to and why is that relevant? The insert is part of the Tiger‑tec Gold series, a coating technology that enhances wear resistance and process reliability, making it suitable for demanding turning tasks in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation between our company and the brand owners. The offered item is original, brand‑new goods from the manufacturer (Walter Tools).
DNMG150408-RM5 WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, consistent chip control and the robust Tiger·tec Silver coating for efficient machining of stainless steel; order the inserts directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150408-RM5 WMP20S indexable turning insert — Tiger·tec Silver, RM5 chipbreaker (Walter Tools) The DNMG150408-RM5 WMP20S is a rhombic 55° indexable turning insert designed for reliable machining of stainless steel in medium to tough cutting conditions. Tiger·tec Silver coated carbide grade WMP20S Optimised for machining stainless steel RM5 chipbreaker for stable chip formation Negative 0° relief for robust cutting Maximise productivity with a coating engineered for stainless steel The Tiger·tec Silver coating and the WMP20S coated carbide grade are tuned for the specific demands of stainless steel: tendency to gall, high heat generation and ductile chips. The combination offers improved wear resistance and thermal stability, which reduces flank wear and extends edge life under continuous loads. For manufacturers this means fewer insert changes and more predictable tool cycles, supporting stable production rates and consistent component quality. Reliable chip control and form stability for consistent results The RM5 chipbreaker ensures controlled chip formation and evacuation, lowering the risk of built-up edge and improving surface finish in interrupted or robust cuts. Coupled with the rhombus 55° geometry, the insert provides flexibility across a wide range of turning operations, from light finishing to heavier roughing tasks. The relatively large 0.8 mm corner radius increases edge strength, delivering repeatable performance where tool life and process reliability are priorities. Robust geometry for demanding turning conditions With a negative 0° relief and execution code G, the insert is configured for secure cutting where stability is essential. The negative rake characteristic supports higher feed and depth-of-cut combinations while limiting chatter on less rigid setups. This geometry, together with the coated carbide grade, offers a practical balance between cutting force tolerance and surface integrity, making the insert suitable for shops seeking reproducible results on corrosion‑resistant alloys. Practical benefits for the workshop and process planners The insert’s form and cutting data are compatible with common toolholders for DNMG-style rhombic inserts, simplifying tool‑set standardisation. The product is suited to serial production and single‑part manufacturing alike: the combination of Tiger·tec Silver and the RM5 chip control reduces unplanned downtime and supports predictable reconditioning intervals. For planners, this translates into easier capacity planning and lower overall machining costs per part. For tailored cutting data, toolholder recommendations or to source DNMG150408-RM5 WMP20S inserts, contact Metav Werkzeuge for expert guidance and local availability Technical data SKU: DNMG150408-RM5-WMP20S-WALTER Designation: DNMG150408-RM5 WMP20S Brand: Walter Tools Series: Tiger·tec Silver Numbers / Core technical data Inscribed circle / size: 15 Corner radius: 0.8 mm Relief angle: 0° (negative) Thickness code: 04 Plate form: Rhombus 55° Special features Grade: WMP20S (coated carbide) Chipbreaker: RM5 Material application: stainless steel Execution: G (negative geometry) ISO designation: DNMG150408-RM5 WMP20S FAQ What materials is this insert intended for? The insert is designed primarily for machining stainless steel; the WMP20S grade and Tiger·tec Silver coating support secure chip formation and improved wear resistance when cutting such alloys. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes controlled chip segmentation and evacuation, reducing the likelihood of built‑up edge and improving surface quality in turning operations. What does the 0.8 mm corner radius mean for performance? A 0.8 mm corner radius strengthens the cutting edge, improving tool life and robustness in roughing or interrupted cuts while influencing the achievable surface finish. Is the negative 0° relief suitable for heavier cuts? Yes; the negative 0° relief increases edge stability and is appropriate for heavier cutting conditions where higher cutting forces occur. Can the insert be used in common DNMG toolholders? The rhombic 55° form conforms to standard DNMG interfaces; compatibility with specific holders should be checked against holder specifications and recommended cutting data. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for product identification and explanatory purposes only. There is no affiliation implied between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
DNMG150408-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Reliable turning performance for rostfreier Stahl is achieved by the combination of the WMP30G Tiger·tec Gold grade and the RM5 chipbreaker, delivering stable cutting edges and predictable chip formation; the 0.8 mm nose radius and negative 0° rake angle support consistent surface quality and tool life. Order the DNMG150408‑RM5 WMP30G directly via Metav Werkzeuge or consult our specialists for machining recommendations. DNMG150408-RM5 WMP30G — indexable turning insert, Tiger·tec Gold coating, for rostfreier Stahl (Walter Tools) DNMG150408-RM5 WMP30G is an indexable turning insert designed for turning applications in rostfreier Stahl, combining a rhombic 55° shape with a robust chipbreaker for secure material removal. Tiger·tec Gold coated carbide Rhombic 55° insert geometry 0.8 mm nose radius for stable edges Negative 0° rake for secure cutting Deliver higher productivity when machining rostfreier Stahl The combination of the Tiger·tec Gold coating and the WMP30G grade is engineered to counter the typical challenges of machining rostfreier Stahl: high workpiece toughness, built-up edge tendency and heat generation. The coated carbide substrate provides improved wear resistance and thermal stability, while the RM5 chipbreaker promotes manageable chips and repeatable cutting conditions. As a result, cycle times can be optimised and downtime for edge repairs reduced without compromising finished-part integrity. Stable chip control and improved surface finish The RM5 chipbreaker is shaped to produce short, even chips when used in combination with the rhombic 55° geometry, which moderates the engagement angle and aids stability during interrupted cuts. The negative 0° rake angle increases edge strength to resist chipping under tougher cutting regimes, so the operator obtains a more consistent surface quality. For less experienced users, coated carbide means a predictable wear pattern and simpler process parameter choice, reducing trial-and-error set‑up time on the shop floor. Robust edge life and repeatable results The Tiger·tec Gold technology contributes to a durable cutting edge and controlled flank wear; this improves reproducibility across multiple insert changes and supports stable tool life in serial production. The insert’s tolerance class M and robust execution ensure that the cutting edge remains reliable under medium to heavy conditions typical for rostfreier Stahl work. Longer intervals between indexings and fewer scrap parts support the rational case for productivity gains and lower effective machining costs. Practical fitment and machining notes for production use The insert’s rhombic 55° form, size 15 and thickness 04, together with the 0.8 mm nose radius, offer a balanced compromise between edge strength and ability to deliver a fine surface finish. The designation DNMG150408 indicates the standard geometry for commonly used tool holders; the RM5 chipbreaker and WMP30G grade are matched primarily for ISO group M applications. When integrating this insert into a turning cell, select compatible clamping systems and verify cutting data charts for rostfreier Stahl to achieve the best combination of feed and speed. Contact Metav Werkzeuge today for application-specific advice on Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG150408-RM5-WMP30G-WALTER Designation: DNMG150408-RM5 WMP30G Manufacturer: Walter Tools Core specifications Insert form: Rhombus 55° Size: 15 Thickness: 04 Nose radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: RM5 Materials & special features Coating / Grade: WMP30G (Tiger·tec Gold) Substrate: Coated carbide Application group: rostfreier Stahl (ISO group M) Series: Tiger-tec Gold Tolerance class: M Execution: G FAQ What materials is this insert best suited for? The DNMG150408‑RM5 WMP30G insert is optimised for rostfreier Stahl (ISO group M), where the Tiger·tec Gold grade and RM5 chipbreaker help to manage toughness and heat during turning. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on this Walter Tools insert promotes controlled, short chips and helps to reduce the risk of built‑up edge, improving process stability and surface finish in rostfreier Stahl turning. Is the negative 0° rake suitable for interrupted cuts? Yes, the negative 0° rake angle increases edge strength, making the DNMG150408‑RM5 WMP30G a good option for applications with interrupted cuts or heavier radial engagement. What surface quality can be expected with a 0.8 mm nose radius? A 0.8 mm nose radius provides a compromise between a strong cutting edge and the ability to produce a consistent surface finish; it is commonly chosen where both durability and finish matter. Which series and coating technology does this insert use? This insert belongs to the Tiger-tec Gold series and uses the WMP30G coated carbide grade, designed for reliable performance when machining rostfreier Stahl. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
DNMG150408-RM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the heat-resistant Tiger·tec Silver grade and the RM5 chipformer for secure machining of difficult-to-machine materials; the combination of a rhombic 55° form and a 0° negative rake provides process stability and predictable tool life. Order the insert via Metav Werkzeuge or consult their technical advisors for cutting data and availability. DNMG150408-RM5 WSM20S — Turning insert, Tiger·tec Silver, Walter Tools (0° negative, Rhombic 55°) The DNMG150408-RM5 WSM20S is a rhombic 55° turning insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant alloys, featuring a coated carbide grade from the Tiger·tec Silver series for enhanced edge stability. Tiger·tec Silver coated grade WSM20S Optimised RM5 chipformer for secure chips Negative rake 0° for stable cutting Rhombic 55° form with 0.8 mm corner radius Consistent cutting performance in rostfreier Stahl and superalloys The WSM20S grade, part of the Tiger·tec Silver family, is a coated carbide designed for applications with high thermal and mechanical load. Its coating improves heat resistance and reduces adhesion on the cutting edge, which supports stable edge life when machining rostfreier Stahl and nickel‑based alloys. In practice, this means fewer interruptions for edge dressing and more predictable tool change intervals, helping to maintain throughput in serial production. Reliable chip control and process security with RM5 The RM5 chipbreaker is engineered for dependable chip formation on tough materials. By producing short, controllable chips, the insert reduces the risk of chip snarling and workpiece damage, which contributes to steady cycle times and safer turning operations. For production environments where repeatability and minimal rework are essential, the chip control provided by this geometry supports measurable process improvements. Robust geometry for demanding turning tasks The rhombic 55° form combined with a 0° (negative) relief angle and a 0.8 mm corner radius increases insert strength and edge support under heavy cuts. This geometry favours stability when encountering interrupted cuts or hard layers and is compatible with standard toolholders that accept DNMG‑style inserts. The design balances cutting force distribution and edge durability, enabling higher feed rates while maintaining surface quality. Productivity and predictable tool consumption Using a coated carbide grade tuned for hard-to‑cut materials leads to longer in‑service life and lower tooling costs per component. The combination of the WSM20S grade and the RM5 chipformer reduces unscheduled downtime and results in a more economical turning process over time. For workshops seeking both performance and repeatability, this insert supports reliable cycle planning and contributes to overall machining efficiency. Contact Metav Werkzeuge for application advice and to request DNMG150408-RM5 WSM20S turning inserts from Walter Tools, including cutting parameters and stock information Technical Data Article number: DNMG150408-RM5-WSM20S-WALTER ISO designation: DNMG150408-RM5 WSM20S Product type: Turning insert Manufacturer: Walter Tools Dimensions & core data Inscribed circle: 15 Thickness designation: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Chipbreaker: RM5 Tolerance class: M Grade: WSM20S Series: Tiger·tec Silver Execution: G Shape: Rhombus 55° Materials & special features Coating: Tiger·tec Silver Substrate: Coated carbide Material groups: S (superalloys / titanium), M (rostfreier Stahl) Suitable for heavy‑duty and difficult‑to‑machine materials Stable chip formation and improved heat resistance FAQ What materials is this insert suitable for? The DNMG150408-RM5 WSM20S is specified for machining S (superalloys and titanium) and M (rostfreier Stahl) material groups and performs well where heat resistance and chip control are required. How does the RM5 chipbreaker affect machining? The RM5 chipformer promotes short, controllable chips on tough materials, which improves process security and reduces the risk of chip entanglement during turning with the DNMG150408-RM5 WSM20S insert. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver coating on the WSM20S grade enhances thermal stability and wear resistance, delivering a more predictable tool life when machining rostfreier Stahl and heat‑resistant alloys. Which insert geometry ensures strength during interrupted cuts? The rhombic 55° form together with a 0° negative relief and a 0.8 mm corner radius gives the insert robust edge support, benefitting operations with interrupted cuts and providing stable surface finish characteristics. Is this insert compatible with standard DNMG toolholders? The insert follows the DNMG1504 designation and is intended for toolholders designed for DNMG‑style inserts; confirm the toolholder's clamping and seat geometry for optimal fit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), with headquarters in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered marks are mentioned for explanation only; there is no affiliation between our company and the listed manufacturers. The offered item is an original, factory-new product of the manufacturer.
DNMG150408-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of proven edge stability and the Tiger·tec Silver coating combined with a robust RM5 chipbreaker for reliable machining of stainless steels and superalloys; order the insert directly via Metav Werkzeuge or ask our consultants if needed DNMG150408-RM5 WSM30S turning insert – Tiger·tec Silver, for stainless steels and superalloys (Walter Tools) A DNMG150408-RM5 WSM30S indexable turning insert engineered for demanding applications in stainless steels and heat‑resistant superalloys, offering a rhombic 55° geometry and a stable chip control system Tiger·tec Silver coated carbide grade WSM30S Optimised for stainless steels and superalloys Rhombic 55° geometry, 0.8 mm corner radius Negative 0° rake, robust chipbreaker RM5 Consistent cutting performance for tough alloys The WSM30S grade, part of the Tiger·tec Silver family, delivers a balanced combination of wear resistance and edge toughness optimised for machining stainless steels and high‑temperature alloys. The coated cemented carbide substrate supports secure chip formation and prevents rapid edge breakdown under thermal stress. By choosing a coated grade with proven heat resistance, production runs benefit from fewer interruptions and more consistent component tolerances, which lowers rework and increases process reliability. Geometry and edge details that improve productivity This insert’s rhombic 55° shape and 0.8 mm corner radius are designed to offer a controlled cutting action and predictable tool forces in turning operations. The RM5 chipbreaker channels chips efficiently for medium to heavy cuts, reducing the risk of built‑up edge on difficult materials. The negative 0° rake increases edge support and improves tool life in interrupted cuts or unstable setups, making the geometry particularly suitable for roughing and transferring to finishing passes with stable results. Application focus and practical advantages at the machine With a material designation for groups M and S, the insert is aimed at workshops that process stainless steels as well as heat‑resistant superalloys and titanium. The coated surface lowers friction, improving surface finish while the grade’s toughness guards against chipping in short‑chipping materials. For machine shops seeking predictable performance, this combination fosters higher utilisation rates and reduced tooling changes per batch. The technical specification supports selection for both conventional turning and CNC operations where consistent repeatability is required. Contact Metav Werkzeuge for individual cutting data and to discuss how the Tiger·tec Silver WSM30S grade from Walter Tools can increase throughput in specific stainless steel and superalloy applications Technical data SKU: DNMG150408-RM5-WSM30S-WALTER Article designation: DNMG150408-RM5 ISO designation: DNMG150408-RM5 WSM30S Manufacturer: Walter Tools Product type: Turning insert Measurements & core data Insert size: 15 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness code: 04 Tolerance class: M Materials & special features Coating / grade: Tiger·tec Silver, WSM30S (coated cemented carbide) Chipbreaker: RM5 Plate form: Rhombic 55° Execution / grade: G Material suitability: stainless steels (M); superalloys and titanium (S) FAQ What materials is this insert best suited for? The DNMG150408-RM5 WSM30S is formulated for stainless steels (M) and heat‑resistant superalloys/titanium (S), combining heat resistance with edge stability for these groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating reduces friction and increases thermal resistance, which helps the insert maintain a stable cutting edge in demanding turning operations. Can this insert be used for finishing operations? Yes, the rhombic 55° geometry and controlled corner radius enable the insert to be used for both productive roughing and accurate finishing passes when parameters are adjusted accordingly. Is the RM5 chipbreaker suitable for interrupted cuts? The RM5 design offers robust chip control and, combined with the negative rake and WSM30S grade, provides enhanced edge support in interrupted or heavy cuts. What is the exact designation to order? Order under SKU DNMG150408-RM5-WSM30S-WALTER or specify ISO designation DNMG150408-RM5 WSM30S when requesting quotes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
DNMG150408-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the RP5 chipbreaker and the Rhombus 55° geometry to achieve stable chip formation and long tool life when machining steel; order the DNMG150408-RP5 WPP05G directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408-RP5 WPP05G indexable turning insert — Tiger·tec Gold coating, for steel | Walter Tools The DNMG150408-RP5 WPP05G is an indexable turning insert for steel machining, engineered with a Tiger·tec Gold-coated cutting grade and an RP5 chipbreaker to ensure consistent chip control and reliable performance in general turning applications. Tiger·tec Gold coating RP5 chipbreaker for stable chips Rhombus 55° profile 0.8 mm nose radius Improve productivity with wear-resistant Tiger·tec Gold The Tiger·tec Gold cutting grade delivers a combination of wear resistance and robustness that reduces tool changes and keeps machining cycles productive. The insert’s coated carbide grade WPP05G is matched to the thermal and mechanical demands of steel machining (ISO group P), providing stable edge performance across a range of cutting conditions. With a reliable chip control strategy implemented via the RP5 chipbreaker, the insert contributes to predictable machining results and fewer interruptions in production. Consistent accuracy thanks to robust geometry A Rhombus 55° plate form with a 0.8 mm nose radius and negative rake 0° offers a robust cutting edge that tolerates varying depths of cut while maintaining dimensional repeatability. The plate’s M tolerance ensures interchangeability between indexable inserts and holder systems, supporting efficient setup and minimising rework. These geometric characteristics make the insert suitable for turning operations where edge stability and repeatable part quality are essential. Practical application and workshop benefits Designed specifically for the steel machining group (P), the insert supports a broad range of operations from general turning to semi-finishing where consistent chip formation and tool life are priorities. The combination of RP5 chipbreaker and Tiger·tec Gold surface treatment helps manage heat and chip shape during cutting, reducing the likelihood of built-up edge and extending productive cutting time. For workshops seeking reliable, ready-to-use indexable inserts, this option balances durability with predictable cutting behaviour. For application advice or to order the DNMG150408-RP5 WPP05G from Walter Tools, please contact Metav Werkzeuge for tailored recommendations and delivery options Technical Data Article number: DNMG150408-RP5-WPP05G-WALTER Description: Drehwendeschneidplatte DNMG150408-RP5 WPP05G Walter Tools Type: Drehwendeschneidplatte ISO designation: DNMG150408-RP5 WPP05G Grade: WPP05G Series: Tiger-tec Gold Manufacturer: Walter Tools Core specifications Inscribed circle: 15 Thickness: 04 Nose radius: 0.8 Relief angle: 0° (negativ) Features & applications Coating technology: Tiger·tec Gold Cutting material: coated carbide (WPP05G) Chipbreaker: RP5 Shape: Rhombus 55° Tolerance class: M Application group: steel (P) Sort distribution: 10 wear-resistant, 20 universal, 30/35 tougher FAQ What materials is this insert suitable for? The DNMG150408-RP5 WPP05G is designed primarily for machining steel (ISO group P) and is formulated to handle the typical heat and chip formation associated with steel turning. Which chip control does the insert offer? The insert features the RP5 chipbreaker, which delivers stable chip formation and reliable evacuation under a variety of cutting conditions. How does the Tiger·tec Gold coating benefit the process? The Tiger·tec Gold coating on the WPP05G grade enhances wear resistance and edge stability, extending productive tool life during steel machining. Is the geometry suitable for finishing operations? The Rhombus 55° geometry with a 0.8 mm nose radius and negative rake provides a robust profile that can be used for semi-finishing and general turning where a balance of strength and surface quality is required. What tolerance can be expected from the insert? The plate is manufactured to an M tolerance, ensuring interchangeability and consistent seating in compatible tool holders. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mark names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered article is an original, brand-new product from the manufacturer.
DNMG150408-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Combine high process reliability and fast chip control with the productive Tiger‑tec Gold grade and the RP5 chipbreaker for efficient steel turning; order the DNMG150408‑RP5 WPP10G turning insert directly via Metav Werkzeuge or consult our tooling specialists for application advice. DNMG150408‑RP5 WPP10G turning insert (DNMG150408‑RP5) — Rhombic 55°, 0° negative rake — Walter Tools The DNMG150408‑RP5 WPP10G is a rhombic turning insert designed for general steel machining, offering a Tiger‑tec Gold coated carbide grade for stable wear behaviour and consistent surface quality. Tiger‑tec Gold coated carbide grade RP5 chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robustness Higher productivity through advanced coating and material match The Tiger‑tec Gold coating combined with a coated carbide substrate provides a balance of wear resistance and toughness, optimised for steel applications (ISO group P). This translation of material science into practice reduces flank wear and helps maintain a consistent cutting edge over long production runs, which results in fewer insert changes and more uptime on the machine. The hardened coating technology is engineered to cope with typical heat and chip formation when machining steels, delivering measurable improvements in process security and repeatability. Geometry engineered for dependable chip control and surface finish The rhombic 55° shape with a 0° negative rake and the RP5 chipbreaker creates controlled chip formation across a wide range of feeds. The 0.8 mm corner radius adds robustness at the cutting edge, making the insert resilient during interrupted cuts and light roughing operations. These geometric choices help to stabilise the cut, reducing vibration and improving surface finish while preserving tool life — a practical advantage for batch production and mixed‑workpiece schedules. Application scope and operational benefits in steel machining Designed specifically for steel, this insert performs well on unalloyed and alloyed grades commonly found in general machining. The grade classification emphasises wear resistance with sufficient toughness for variable cutting conditions, supporting both finishing and semi‑finishing operations. The combination of grade and chipbreaker allows for competitive metal removal rates while maintaining consistent part quality, which can shorten cycle times and contribute to a lower cost per component in series production. Handling, selection and workshop integration The insert’s designation and series alignment with Walter Tools’ Tiger‑tec Gold range simplify grade selection and inventory management. Inserts of this type are straightforward to mount in standard toolholders for DNMG‑style geometries and integrate seamlessly into existing turning toolsets. For shops seeking to optimise feeds and speeds, starting parameters can be derived from the chipbreaker characteristics and adjusted to the specific steel grade; technical advice is available from Metav Werkzeuge for feed/speed tuning and process optimisation. Contact Metav Werkzeuge for tailored tooling advice and to secure DNMG150408‑RP5 WPP10G inserts from stock Technical data SKU: DNMG150408-RP5-WPP10G-WALTER Designation: DNMG150408 WPP10G Type: Turning insert Series: Tiger‑tec Gold Grade: WPP10G Manufacturer: Walter Tools Core specifications Shape: Rhombic 55° Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: RP5 Size: 15 Thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold Material suitability: Steel (ISO P) Execution: G Series and grade information included Optimised for stable chip formation and wear resistance FAQ What materials is this insert suitable for? The DNMG150408‑RP5 WPP10G is specified for steel (ISO group P); the Tiger‑tec Gold grade is tuned for the heat and chip characteristics of steel machining. What does the RP5 chipbreaker deliver in practice? The RP5 chipbreaker provides controlled chip formation across typical turning feeds, improving chip evacuation and reducing the risk of built‑up edge during operations with this Walter Tools insert. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold coated carbide increases wear resistance while maintaining edge toughness, helping to extend tool life and deliver consistent surface finish on steel components. Which operations suit the rhombic 55° geometry best? The Rhombic 55° shape is versatile for both finishing and semi‑finishing turns, allowing secure clamping in standard DNMG toolholders and reliable performance in batch production. Is the corner radius suitable for interrupted cuts? The 0.8 mm corner radius gives the insert additional edge strength for interrupted cuts and light roughing, offering a compromise between rigidity and attainable surface finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150408-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
High process security and extended tool life combine to deliver consistent turning results in steel; the Tiger·tec Gold coating and RP5 chip control reduce downtime and improve surface finishes. Order the DNMG150408-RP5 WPP20G insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408-RP5 WPP20G Turning insert for steel — Tiger·tec Gold by Walter Tools A DNMG150408-RP5 WPP20G indexable turning insert designed for efficient steel turning applications, combining Tiger·tec Gold coating with RP5 chip control for productive, repeatable machining. Tiger·tec Gold coated carbide RP5 chipbreaker for reliable chips Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robust edge Proven performance for steel machining The combination of Tiger·tec Gold technology and the WPP20G grade provides a robust, coated carbide substrate tuned for the thermal and mechanical demands of machining steel (ISO group P). This material pairing extends cutting-edge life and reduces flank wear under typical turning cycles, translating into fewer indexings and longer production runs. The specified grade balances hardness and toughness, which supports productive cutting conditions while maintaining surface consistency on turned components. Geometric control that stabilises the process The rhombic 55° geometry and RP5 chipbreaker ensure controlled chip formation and secure engagement in a wide range of turning tasks. A 0.8 mm corner radius increases edge robustness for interrupted cuts and heavy cross‑sections, while the 0° (negative) free angle supports stronger edge support for industrial feeds. The chipbreaker design promotes short, manageable chips and reduces the risk of entanglement—key for unattended cycles and high‑feed operations—resulting in improved process stability and predictable tool behaviour. Practical advantages for workshop productivity As an indexable insert, this component simplifies tool management and reduces setup time compared with brazed or regrindable tips. Tolerance class M and standard plate dimensions ensure compatibility with common DNMG toolholders, supporting quick changeovers and repeatable positioning. The insert’s design aims to cut machining costs per component by lowering scrap rates and extending the interval between insert changes, making it suitable for batch and continuous production environments where reliability and throughput are priorities. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss optimal inserts and toolholders for specific steel grades: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DNMG150408-RP5-WPP20G-WALTER Name: DNMG150408-RP5 WPP20G Manufacturer: Walter Tools Product type: Turning insert Series: Tiger-tec Gold Grade: WPP20G Facts Size: 15 mm Thickness: 4 mm Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features RP5 chipbreaker Rhombic 55° plate form Coated carbide (Tiger·tec Gold) Suitable for steel (ISO group P) Designed for productive, stable chip formation FAQ What materials is this insert suitable for? The DNMG150408-RP5 WPP20G insert (Walter Tools) is formulated primarily for steel (ISO group P), offering reliable wear resistance and chip control during steel turning. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes short, controlled chips and stabilises the cutting process; this improves surface finish and reduces the likelihood of chip interference when using the DNMG150408-RP5 WPP20G. Which toolholders are compatible with this insert form? Standard DNMG toolholders with a rhombic 55° pocket accept this insert form; the insert’s dimensions and tolerance class M ensure secure seating and repeatable indexing. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold reduces flank wear and improves thermal resistance, extending the insert life under higher cutting speeds and more demanding steel applications when using the WPP20G grade. Is the corner radius suitable for heavy cuts? The 0.8 mm corner radius provides a robust cutting edge that withstands interrupted cuts and higher depths of cut, contributing to fewer insert changes in tough turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
DNMG150408-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of a high‑productivity, wear‑resistant turning solution that combines Tiger‑tec Gold coating with an optimised RP5 chipbreaker for reliable steel machining; order directly via Metav Werkzeuge or consult our specialists for application support. DNMG150408-RP5 WPP30G turning insert for steel (Tiger‑tec Gold, Walter Tools) DNMG150408-RP5 WPP30G is a rhombic 55° indexable turning insert engineered for efficient steel machining with a coated‑carbide grade optimised for wear resistance and consistent chip control Tiger‑tec Gold coated carbide RP5 chipbreaker for reliable chip control 0° negative rake for enhanced edge strength Rhombic 55° geometry with 0.8 mm nose Consistent productivity through robust geometry and chip control The DNMG150408-RP5 WPP30G insert delivers a pragmatic combination of geometry and chip management to maintain cycle times on production and jobbing lathes. The rhombic 55° shape provides good access on shoulder operations and medium‑turning passes, while the RP5 chipbreaker is designed to promote predictable, short chips during the typical heat and strain of steel cutting. The 0° negative rake increases edge strength, reducing the risk of edge chipping under interrupted cuts or heavier feed conditions. Together these attributes offer a measurable improvement in process stability and uptime. Longer tool life and surface quality with Tiger‑tec Gold coating The WPP30G grade, part of the Tiger‑tec Gold family, combines a hard, wear‑resistant coating with a carbide substrate to delay flank and crater wear. This coated‑carbide construction reduces oxidation and adhesion during steel machining, which in turn preserves the cutting edge and helps achieve consistent surface finishes over longer tool life. In practice, the coating reduces the need for frequent index changes and supports economic machining by extending productive tool life and lowering tool‑related downtime. Optimised for steel (ISO P) — predictable results in common applications This indexable insert is formulated explicitly for steel (ISO P) applications, covering a broad range from unalloyed to alloyed steels where typical heat generation and chip formation occur. The moderate 0.8 mm nose radius balances edge strength and finish capability, allowing for stable turning at practical feeds while maintaining acceptable surface roughness. The insert’s tolerance class M and standard DNMG form make it suitable for production runs where repeatability and interchangeability are required, supplying a reliable solution for workshops seeking consistent outcomes. Practical integration, handling and setup advantages With a nominal inscribed circle of 15 mm and a plate thickness matched to common DNMG holders, the insert fits standard clamping systems and is straightforward to index and replace. The coated carbide substrate and the RP5 chip control make it well suited to stable machine setups and medium‑duty turning processes; when used in the correct clamping and cutting parameter window, the result is reduced vibration and steady cutting forces. Basic selection of speeds and feeds should follow the grade guidelines for steel, and the insert benefits from conventional coolant application to support tool life and chip evacuation. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger‑tec Gold inserts into steel turning processes and for assistance selecting the right insert grade and holder combinations Technical data Article number: DNMG150408-RP5-WPP30G-WALTER Designation: DNMG150408-RP5 WPP30G Series: Tiger‑tec Gold Grade: WPP30G Manufacturer: Walter Tools Measurements / Core data Inscribed circle: 15 mm Thickness: 4 mm Nose radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Materials & features Coating technology: Tiger‑tec Gold Chipbreaker: RP5 Substrate: coated carbide Suitable for: steel (ISO P) Geometry: Rhombic 55° FAQ What materials is this insert suitable for? The DNMG150408-RP5 WPP30G insert is designed primarily for steel machining (ISO P); the WPP30G grade and Tiger‑tec Gold coating target the typical thermal and chip‑forming behaviour of steels. Can this insert be used for interrupted cuts? Yes, the 0° negative rake and robust coated‑carbide substrate of the DNMG150408-RP5 provide enhanced edge strength, making it suitable for interrupted cuts within the recommended cutting parameters. Which chipbreaker is integrated and what does it achieve? The insert features the RP5 chipbreaker, which promotes reliable chip formation and evacuation during turning of steel, improving process stability and reducing manual chip handling. Is the insert compatible with standard DNMG holders? The DNMG form and 15 mm inscribed circle match standard DNMG toolholders; ensure the holder clamping and seat condition meet the manufacturer’s specifications for secure mounting. How does the WPP30G grade affect tool life and finish? WPP30G, in combination with Tiger‑tec Gold coating, enhances wear resistance and heat control during steel turning, which contributes to longer tool life and consistent surface quality under appropriate cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is a brand of Walter AG, a leading manufacturer of precision tools for metalworking and part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150412-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Combining the WEP10C cermet grade with the FP5 chipbreaker and a Rhombus 55° geometry delivers stable chip control, reliable finishing and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for process-adapted recommendations. DNMG150412-FP5 WEP10C – Indexable turning insert by Walter Tools (cermet, FP5 chipbreaker) The DNMG150412-FP5 WEP10C is an indexable turning insert designed for precision finishing and controlled chip formation in demanding metalcutting applications. Cermet grade WEP10C for fine finishing FP5 chipbreaker for controlled chips Rhombic 55° shape for versatile turning 0° negative rake, 1.2 mm corner radius Superior finish and predictable tool life The Walter Cermet WEP10C grade combines wear resistance with cutting-edge substrate properties to support high-quality surface finishes in finishing operations. As a cermet-based solution, the grade is optimised for low built-up edge and consistent edge integrity, which helps to reduce rework and measurement-based quality checks. The FP5 chipbreaker complements this by promoting even chip formation at low to moderate feeds; this results in fewer interruptions, a stable cutting process and measurable reductions in cycle-time variance. For shops seeking reproducible part quality, the insert’s design focuses on delivering repeatable results rather than one-off performance spikes. Stable chip control and process security Geometry plays a decisive role in process reliability: the Rhombus 55° form offers a balance between approach angle and strength, enabling adaptability across a range of turning tasks. The combination of the FP5 chipbreaker and a 0° (negative) rake stabilises cutting forces in interrupted and finishing cuts, improving machine utilisation and reducing unplanned tool changes. Where chip evacuation and consistent swarf generation are priorities, this insert provides a controlled chip flow that supports automated machining and unattended shifts. The insert’s 1.2 mm corner radius further assists in distributing cutting stresses, which can extend useful edge life under steady cutting conditions. Practical integration and material guidance The insert is supplied under the Walter Cermet series and carries the designation DNMG150412-FP5 WEP10C, which simplifies tool management and inventory tracking. Material suitability should be verified against the manufacturer’s product matrix, as the catalogue-dependent substrate properties influence optimal cutting parameters and expected life. Integration into existing toolholders is straightforward for standard DNMG bodies, and the consistent geometry aids programming for CAM systems. For shops that require empirical parameter tuning, a short trial cut under production-representative conditions will quickly reveal achievable feeds and speeds while maintaining dimensional tolerances and surface standards. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools DNMG150412-FP5 WEP10C inserts Technical data Article number: DNMG150412-FP5-WEP10C-WALTER Label: Drehwendeschneidplatte DNMG150412-FP5 WEP10C Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Insert size: 15 Thickness: 04 Corner radius: 1.2 mm Tolerance class: M Special features Grade series: Walter Cermet Grade: WEP10C Chipbreaker: FP5 Insert form: Rhombus 55° Rake angle: 0° (negative) Designation: DNMG150412-FP5 ISO designation: DNMG150412-FP5 WEP10C FAQ Which applications suit this insert best? The DNMG150412-FP5 WEP10C insert is primarily intended for precision finishing and applications where consistent surface quality and controlled chip formation are required; suitability should be checked against the Walter product matrix for specific workpiece materials. What chip control can be expected from the FP5 geometry? The FP5 chipbreaker promotes short, controllable chips and steady evacuation, supporting longer unmanned runs and reduced risk of chip entanglement in automated setups. What is the corner radius and how does it affect machining? The insert features a 1.2 mm corner radius, which helps distribute cutting forces and improves edge robustness during finishing passes. Can the Rhombus 55° form be used for both external and light profiling? Yes, the Rhombus 55° geometry is versatile and well suited to general turning and light profiling tasks where a compromise between approach angle and edge strength is beneficial. How is material compatibility indicated for this grade? Material compatibility for the WEP10C cermet grade is catalogue-dependent; consult the Walter Cermet product matrix or Metav Werkzeuge’s application engineers for definitive guidance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no association between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150412-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Combine wear-resistant Tiger·tec Gold performance with a robust chip control geometry to improve process stability and reduce tooling costs; order the insert directly via Metav Werkzeuge or consult the specialists for application support. DNMG150412-FP5 WPP10G turning insert — Tiger·tec Gold grade, Rhombus 55° (Walter Tools) The DNMG150412-FP5 WPP10G is a rhombic 55° indexable turning insert optimised for steel machining, featuring a Tiger·tec Gold coating and an FP5 chipbreaker for controlled chip formation Tiger·tec Gold coated, high wear resistance Rhombic 55° geometry for versatile turning 0° negative clearance for stable cutting 1.2 mm corner radius for robust edges Consistent cutting performance that pays off The Tiger·tec Gold WPP10G grade combines a coated carbide substrate with a tailored surface technology to deliver extended tool life when machining steels (ISO P). This results in fewer tool changes, more predictable tool cycles and a better overall cost-in-use. The insert’s design targets reliable heat and wear management during typical turning operations, which supports higher machine uptime and a more stable production flow. Geometry engineered for chip control and stability The Rhombic 55° form, paired with the FP5 chipbreaker, promotes controlled chip formation and efficient evacuation. The 0° negative clearance enhances edge strength in interrupted cuts and under heavier feed conditions, while the 1.2 mm corner radius provides a compromise between edge robustness and surface finish. Together these features ensure repeatable cutting behaviour and reduced risk of edge chipping during demanding steel turning tasks. Practical advantages for workshop use Tolerance class M and the standard DNMG form allow straightforward interchangeability with common tool holders, supporting quick replacement and minimal setup time. The insert’s specification is focused on practical application: coated carbide for wear resistance, a dedicated chipbreaker for improved process security and a geometry that balances material removal with surface quality. This makes the insert suitable for a wide range of turning steps in component manufacture where steel is the principal workpiece material. Brand quality and application assurance Manufactured under the Walter Tools range and the Tiger·tec Gold series, this indexable insert offers the expected industrial standards for repeatable performance and reliable edge stability. The grade’s configuration is targeted at steel machining needs and contributes to consistent surface finishes and predictable tool life across batch production. Technical enquiries and tailored recommendations are available to ensure the insert fits the specific machine, holder and process parameters on site. For reliable, high‑productivity steel turning with the Tiger·tec Gold WPP10G grade, contact Metav Werkzeuge for availability and expert application support. Technical data SKU: DNMG150412-FP5-WPP10G-WALTER Article designation: DNMG150412-FP5 ISO designation: DNMG150412-FP5 WPP10G Manufacturer: Walter Tools Product type: Turning insert Grade/series: Tiger·tec Gold Grade: WPP10G Facts Corner radius: 1.2 mm Inscribed circle: 15 mm Clearance angle: 0° (negative) Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Chipbreaker: FP5 Geometry: Rhombic 55° Application: Steel (ISO P) FAQ What materials is this insert suited for? The DNMG150412-FP5 WPP10G turning insert is designed primarily for machining steel (ISO P), including unalloyed and alloyed steels. What does the WPP10G grade deliver? WPP10G is a Walter Tools grade within the Tiger·tec Gold technology; it provides high wear resistance and stable cutting-edge performance for steel applications. How does the FP5 chipbreaker influence results? The FP5 chipbreaker shapes chips for controlled evacuation, improving process security and contributing to consistent surface quality during turning. What production advantages arise from the 0° negative clearance? A 0° negative clearance strengthens the cutting edge for interrupted cuts and heavier feeds, supporting stable machining under load. Is the insert interchangeable with standard DNMG holders? Yes; the DNMG form and tolerance class M are compatible with standard tool holders for DNMG inserts, subject to holder verification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. The mentioned brand names are used solely for explanation. There is no connection between our company and the brands named. The offered item is an original, factory‑new product of the respective manufacturer.
DNMG150412-FP5 WPP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the FP5 chipbreaker yields reliable chip control and long tool life in steel turning; select this indexable turning insert from Walter Tools for consistent process security and reduced rework. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice. DNMG150412-FP5 WPP20G indexable turning insert — Walter Tools, Tiger·tec Gold, for steel The DNMG150412-FP5 WPP20G is an indexable turning insert engineered for robust steel machining, offering a coated carbide grade and FP5 chip control for productive, repeatable turning operations. Tiger·tec Gold coated carbide grade WPP20G FP5 chipbreaker for controlled chip formation Rhombic 55° geometry, 1.2 mm corner radius Negative 0° rake for robust turning operations Consistent chip control for higher productivity The primary benefit of the FP5 chipbreaker is dependable chip control, which reduces interruptions and tool-change frequency in demanding turning cycles. With the integrated chipformer design and the coated substrate, the insert maintains a stable cutting behaviour when machining steels listed under ISO group P. This leads to fewer clogged tools, lower cycle variability and improved uptime on production lathes. The functional design supports both continuous and interrupted cuts, making it suitable for mixed-batch manufacturing where predictable performance is essential. Enhanced wear resistance for long tool life The WPP20G grade combines the Tiger·tec Gold coating with a finely tuned substrate to deliver improved wear resistance and edge stability during steel machining. The coating minimises flank and crater wear under typical turning temperatures, which translates into longer effective cutting intervals and consistent surface finishes. For operations prioritising economic machining and repeatable component quality, the coated carbide technology offers a clear advantage in reducing tooling cost per part while maintaining process reliability. Geometry that supports precision and robustness The rhombic 55° shape and 1.2 mm corner radius provide a balanced geometry for general-purpose turning where both strength and accessibility are required. The negative 0° rake angle increases cutting-edge robustness, suitable for tougher feeds and interrupted cuts, while the compact plate size allows for secure clamping and repeatable positioning. Together these characteristics help deliver stable cutting forces and predictable dimensional results, especially in medium to heavy roughing and finishing passes. Application scope and machining guidance Designed primarily for steels, the insert suits unalloyed and alloyed steels within the ISO P group and is a versatile choice for operations demanding a blend of productivity and surface quality. The combination of chip control and coated grade supports a wide range of feeds and speeds; where process optimisation is required, adjustments to cutting parameters can extend tool life further. For complex geometries or specialised steels, further technical data and machining recommendations are available on request to ensure the best match between tool and application. For precise application support and to source the DNMG150412-FP5 WPP20G from Walter Tools, contact Metav Werkzeuge for personalised advice and delivery arrangements Technical Data SKU: DNMG150412-FP5-WPP20G-WALTER Designation: DNMG150412-FP5 WPP20G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Chipbreaker: FP5 Grade: WPP20G Geometry: Rhombic 55° Corner radius: 1.2 mm Thickness: 04 Insert size: 15 Rake angle: 0° (negative) Tolerance class: M Material group: P (Steel) Facts Corner radius: 1.2 mm Insert size: 15 Thickness: 04 Rake angle: 0° Tolerance class: M Special features Coating: Tiger·tec Gold Carbide type: coated carbide Chip control: FP5 Suitable for: Steel (ISO group P) Shape: Rhombic 55° FAQ What materials is this insert suitable for? The DNMG150412-FP5 WPP20G is developed for machining steels classified in ISO group P and is optimised for the typical heat and chip formation encountered when turning steel. How does the FP5 chipbreaker improve production? The FP5 chipbreaker offers controlled chip formation and evacuation, which reduces tool interruptions and supports consistent cycle times during steel turning with the coated grade. Is the WPP20G grade suitable for finishing passes? Yes, the WPP20G grade balances wear resistance and toughness, allowing for both productive roughing and satisfactory finishing when process parameters are matched to the workpiece. Where can detailed machining recommendations be obtained? Detailed feed and speed guidance for specific steel grades can be provided on request; Metav Werkzeuge can supply tailored recommendations for the insert and the intended application. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
DNMG150412-MK5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a specialised WKK10S grade for abrasive cast iron, and the stable DNMG geometry to ensure consistent chip control and long tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150412-MK5 WKK10S turning insert by Walter Tools — for cast iron, Rhombic 55° / 1.2 mm DNMG150412-MK5 WKK10S is a coated turning insert designed for productive machining of cast iron components in demanding production environments Coated Tiger·tec Silver grade WKK10S Optimised for cast iron machining Rhombic 55° geometry, 1.2 mm corner radius MK5 chipbreaker for short, controllable chips Consistent performance on cast iron with Tiger·tec Silver The coated Tiger·tec Silver grade WKK10S is developed for the typical abrasive wear and short, breaking chips associated with cast iron. This turning grade combines a wear-resistant coated carbide substrate with a tailored surface layer to extend tool life under intermittent contact and heavy interrupted cuts. In practice, the insert reduces the frequency of edge changes and supports predictable process windows, which helps maintain steady production throughput and lower overall machining costs. Stable cutting geometry for improved surface quality The Rhombic 55° form and a 1.2 mm corner radius provide a balanced combination of cutting edge strength and accessibility in shoulder and general turning operations. The MK5 chipbreaker promotes the formation of short, segmented chips that are easier to evacuate from the cutting zone, lowering the risk of surface damage and workpiece rework. A 0° negative rake enhances edge robustness in grooving and finishing cuts, delivering reliable dimensional consistency when machining intricate cast iron components. Productivity gains through reduced downtime and repeatable results Thanks to its focused design for K (cast iron) applications, the insert enables longer intervals between indexings and consistent cutting behaviour across batches. The coated grade supports elevated process stability and repeatable edge wear, which is particularly valuable in series production. Compatibility with standard DNMG toolholders ensures straightforward integration into existing tool setups, meaning changeover times remain short and the production flow keeps moving with minimal interruption. Contact Metav Werkzeuge today to discuss the DNMG150412-MK5 WKK10S turning insert from Walter Tools for cast iron applications and request tailored machining recommendations — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DNMG150412-MK5-WKK10S-WALTER Designation: DNMG150412-MK5 WKK10S Manufacturer: Walter Tools Product type: turning insert Series: Tiger·tec Silver Numbers / Core technical data Insert size: 15 mm Corner radius: 1.2 mm Thickness: 4 mm Free cutting angle: 0° (negative) Special features / Versions Grade: WKK10S (coated carbide) Geometry: Rhombic 55° Chipbreaker: MK5 Application group: ISO K (cast iron) Tolerance class: M FAQ Is this insert suitable for all types of cast iron? The DNMG150412-MK5 WKK10S insert is optimised for ISO K materials and performs well on a wide range of cast irons thanks to the Tiger·tec Silver coating and the WKK10S wear characteristics. Which chip behaviour can be expected with the MK5 chipbreaker? With the MK5 chipbreaker, the insert produces predominantly short, controllable chips, which helps avoid chip entanglement and supports safer, cleaner machining in turning operations. Can this insert be used on standard DNMG toolholders? Yes, the insert conforms to the DNMG specification and fits standard DNMG-compatible toolholders, enabling quick integration into existing tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
DNMG150412-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating with the MK5 chipbreaker for reliable cast-iron machining and benefit from the robust 0° negative rake for stable cutting performance; order the genuine parts via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150412-MK5 WKK20S — indexable turning insert for cast iron (Walter Tools) A DNMG150412-MK5 WKK20S indexable insert designed for efficient and controlled machining of cast iron, part of the Tiger·tec Silver series. Tiger·tec Silver coating for wear resistance MK5 chipbreaker tuned for cast iron Rhombic 55° geometry for versatile turning 0° negative rake for robust cutting Consistent wear resistance for abrasive cast-iron work The combination of the WKK20S grade and Tiger·tec Silver technology is developed to resist the abrasive wear typical of cast-iron machining. This coated carbide formulation is tuned for short, brittle chips and frequent chip breakage, which reduces built-up edge and supports predictable tool life. The MK5 chipbreaker promotes controlled chip segmentation, improving process stability and lowering the frequency of tool changes, which in turn can reduce unplanned downtime and improve overall throughput. Geometry and toughness that support reliable turning A rhombic 55° shape delivers flexible approach angles for facing and light profiling, while the 0° negative rake provides the edge strength required for interrupted cuts and heavier engagement. The generous 1.2 mm corner radius increases edge robustness and extends service life under demanding conditions. With a defined tolerance class M, the insert ensures consistent seat fit and repeatable performance in standard toolholders, helping to maintain component tolerances and reduce scrap rates. Production benefits and application clarity Designed primarily for cast iron in accordance with ISO material group K, this insert balances productivity and durability: fewer insert changes, stable surface finish and better cycle-time predictability. The MK5 chip control reduces the risk of chip entanglement, supporting safer, cleaner machining environments and easing downstream handling. Backed by the engineering behind Tiger·tec Silver, the grade offers a practical route to optimised processes when machining abrasive cast-iron alloys in medium- to high-volume production. Contact Metav Werkzeuge for tailored cutting strategy recommendations and to secure authentic Walter Tools DNMG150412-MK5 WKK20S inserts for consistent cast-iron production Technical data Article number: DNMG150412-MK5-WKK20S-WALTER Designation: DNMG150412-MK5 WKK20S Product type: indexable turning insert Series: Tiger·tec Silver Manufacturer: Walter Tools Core facts Corner radius: 1.2 mm Geometry angle: 55° Rake angle: 0° (negative) Plate size: 15 Plate thickness: 04 Tolerance class: M Materials & features Grade: WKK20S Chipbreaker: MK5 Coating/technology: Tiger·tec Silver Material designation: K (cast iron) Suitable for: cast iron Execution: G FAQ Which materials are suitable for this insert? The DNMG150412-MK5 WKK20S from Walter Tools is designated for cast iron (ISO group K) and is optimised for the abrasive wear and breakable chips typical of those alloys. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on this Walter Tools insert promotes reproducible chip segmentation when turning cast iron, improving chip evacuation and enhancing process stability. What advantage does Tiger·tec Silver provide? Tiger·tec Silver on the WKK20S grade increases resistance to abrasive wear and helps maintain edge integrity, supporting longer service intervals and predictable replacement cycles. Why choose a 0° negative rake geometry? The 0° negative rake offers greater edge strength for heavy cuts and interrupted turning; combined with the rhombic 55° shape, it provides flexibility across common turning operations. Is this insert compatible with standard DNMG toolholders? The insert follows the DNMG150412-MK5 designation and the tolerance class M, which ensures compatibility and a secure fit in standard DNMG-compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of Walter Tools. Walter Tools is part of the Walter AG group, a recognised provider of precision cutting tools.
DNMG150412-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the MM5 chipbreaker yields consistent edge life and controlled chips for machining rostfreier Stahl; the robust rhombic geometry and 0° negative rake support stable cutting under medium to heavy loads. Order the DNMG150412-MM5 WMP20G directly via Metav Werkzeuge or ask our consultants if needed. DNMG150412-MM5 WMP20G indexable turning insert by Walter Tools — Tiger·tec Gold grade for rostfreier Stahl machining A DNMG150412-MM5 WMP20G indexable turning insert engineered for reliable chip control and extended tool life in the machining of rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coating for extended tool life Designed for rostfreier Stahl machining MM5 chipbreaker for stable chip control Rhombic 55° geometry, 0° negative rake Greater process security when turning rostfreier Stahl The combination of the Tiger·tec Gold coating and the WMP20G cutting grade is formulated to manage the specific challenges of rostfreier Stahl: high toughness, tendency to work harden and elevated cutting temperatures. The coated carbide helps maintain a stable cutting edge over longer tool life, reducing the frequency of index changes and contributing to predictable cycle times. This grade supports a balance between wear resistance and toughness, which is particularly advantageous when moving from roughing to semi-finishing passes without sacrificing component integrity. Stable chip control and improved surface quality Built around the MM5 chipbreaker and a rhombic 55° geometry, the insert promotes consistent chip formation and evacuation during turning operations. The defined corner radius 1.2 helps to distribute cutting forces and supports a cleaner part finish while maintaining dimensional stability. The 0° (negative) rake angle contributes to a robust edge capable of withstanding interrupted cuts and higher feed rates, making the insert suitable for medium to robust machining tasks where both surface quality and process reliability are required. Practical benefits for production use The insert’s compact format (15 mm size and thickness 4 mm) and standard clamping compatibility allow straightforward integration into common toolholders. The coated grade is optimised for real-world workshop conditions: reduced edge build-up, good heat resistance and reproducible performance across batches. For production planning, the predictable wear behaviour of the Tiger·tec Gold series supports effective tool-life scheduling, lower downtime for tool changes and improved overall productivity on rostfreier Stahl components. Contact Metav Werkzeuge today for tailored cutting data and to secure original Walter Tools Tiger·tec Gold inserts for rostfreier Stahl applications Technical data SKU: DNMG150412-MM5-WMP20G-WALTER Article designation: DNMG150412-MM5 WMP20G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Insert size: 15 mm Thickness: 4 mm Corner radius: 1.2 mm Geometry: Rhombic 55° Rake angle: 0° (negative) Special features Coating/grade: Tiger·tec Gold / WMP20G (coated carbide) Chipbreaker: MM5 Material application: Suitable for rostfreier Stahl (ISO group M) Construction: Negative rhombic insert for robust turning FAQ What materials is this insert suited for? The DNMG150412-MM5 WMP20G is specified for rostfreier Stahl (ISO group M), where the Tiger·tec Gold grade helps control heat and edge wear during turning. How does the Tiger·tec Gold coating benefit performance? Tiger·tec Gold increases thermal and wear resistance of the cutting edge, enabling longer tool life and more consistent cutting behaviour with the WMP20G grade on stainless workpieces. What role does the MM5 chipbreaker play in machining? The MM5 chipbreaker provides controlled chip formation and evacuation, reducing the risk of long stringy chips and improving surface finish during continuous and interrupted turning. Is the geometry suitable for roughing and finishing? Yes; the rhombic 55° geometry combined with a 1.2 mm corner radius and 0° negative rake balances robustness for heavier cuts with the capacity to achieve good surface quality on finishing passes. Which SKU should be ordered for this insert? Order SKU DNMG150412-MM5-WMP20G-WALTER for the Walter Tools DNMG150412-MM5 WMP20G indexable insert. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150412-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, reliable chip control and robust edge support for consistent turning results in stainless steel and superalloys; order the insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data. DNMG150412-MM5 WSM20S turning insert — Tiger·tec Silver, 0° negative rake — Walter Tools The DNMG150412-MM5 WSM20S is a coated indexable turning insert designed for demanding turning of stainless steel and heat-resistant alloys Tiger·tec Silver grade for thermal resistance Optimised MM5 chipbreaker for stable chips Rhombic 55° form with 1.2 corner radius 0° negative rake for robust edge support Stable cutting in heat‑generating materials The WSM20S grade in the Tiger·tec Silver family combines a wear-resistant coating and substrate balance that promotes stable chip formation and reduces edge build-up when machining stainless steel or nickel‑base alloys. The tailored coating lowers friction and improves heat management at the cutting zone, which translates into longer in‑service edge life and fewer unscheduled tool changes. This yields measurable gains in productivity and process predictability for serial or batch turning operations. Geometry engineered for repeatable surface quality The rhombic 55° plate form and the 1.2 corner radius offer a compromise between strength and finishing capability: the geometry supports heavier cuts while maintaining a regular contact line for consistent surface finish. The insert’s MM5 chipbreaker is optimised for the tendencies of stainless and high‑temperature alloys, producing controlled chip shapes that evacuate reliably and protect the cutting edge. With a 0° negative rake the design prioritises edge security under interrupted cuts and unstable feeds, reducing the risk of chipping in roughing applications. Process integration and predictable performance As a series item from Tiger‑tec Silver, the insert is intended for stable, productive turning cycles where reproducible results matter. The combination of grade and chip control makes the insert suitable for both high‑temperature alloy roughing and finishing passes in stainless steel, reducing cycle time and scrap. Technical data sheets and recommended cutting parameters are available to align speeds and feeds with machine capability; Metav Werkzeuge can support selection and provide cutting charts to match the insert to specific workpiece conditions. The result is improved process security and a consistent surface quality across batches. Discuss cutting parameters and application matching with Metav Werkzeuge to integrate Walter Tools Tiger·tec Silver WSM20S inserts into production and secure optimised results for stainless steel turning Technical Data Article number: DNMG150412-MM5-WSM20S-WALTER Label: Drehwendeschneidplatte DNMG150412-MM5 WSM20S Walter Tools Manufacturer: Walter Tools Facts Free angle: 0° (negativ) Corner radius: 1.2 Plate size: 15 Plate thickness code: 04 Tolerance class: M Special features Grade: WSM20S (Tiger·tec Silver) Chipbreaker: MM5 Plate form: Rhombus 55° Material recommendation: S / M; applicable to stainless steel Series: Tiger-tec Silver FAQ Is this insert suitable for machining stainless steel? Yes. The WSM20S grade in the Tiger·tec Silver series is expressly designed for stainless steel, supporting stable chip formation and reduced built‑up edge under the high temperatures typical of such materials. Which applications benefit most from this insert? The insert is suited to turning operations that require robust edge support and reliable chip control, such as heavy roughing and semi‑finishing in stainless steel and heat‑resistant superalloys. What does the MM5 chipbreaker deliver in practice? The MM5 chipbreaker promotes controlled chip shapes for efficient evacuation, which helps maintain cutting edge integrity and reduces interruptions caused by poor chip management. How does the 0° negative rake affect cutting? A 0° negative rake increases edge strength and resistance to mechanical shock, which is advantageous for interrupted cuts or when machining tough, work‑hardening materials. Can Metav Werkzeuge supply cutting data for this insert? Yes. Metav Werkzeuge can provide recommended speeds, feeds and cutting conditions matched to the Walter Tools WSM20S grade and the specific stainless steel or alloy being machined. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150412-MP3 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP05G grade for extended tool life and consistent performance in steel turning; the rhombic 55° geometry with a 1.2 mm corner radius ensures stable cuts and reliable surface finish. Order the insert directly via Metav Werkzeuge or contact the consultants for application support. Drehwendeschneidplatte DNMG150412-MP3 WPP05G – Tiger·tec Gold coated turning insert by Walter Tools A Drehwendeschneidplatte DNMG150412-MP3 WPP05G engineered for productive steel turning, offering a rhombic 55° form with Tiger·tec Gold coating for enhanced wear resistance Tiger·tec Gold coating for improved wear resistance Optimised for steel machining (ISO P) Rhombic 55° geometry with 1.2 mm corner radius Negative rake 0° for secure cutting edge Enhanced process stability through coated carbide technology The combination of the WPP05G grade and Tiger·tec Gold coating provides measurable gains in tool life and machining stability when turning steels. The coated carbide substrate is formulated to resist the thermal and abrasive loads typical of ISO P materials; this translates into fewer tool changes and longer uninterrupted production runs. The result is a reduction in machining downtime and predictable component quality, which supports higher overall productivity in batch and single-piece manufacturing alike. Geometry designed for consistent surface quality and robustness The rhombic 55° geometry together with a 1.2 mm corner radius gives a balance between cutting-edge strength and achievable surface finish. A larger corner radius increases edge stability and is beneficial when moderate to heavy cuts are required, while the negative rake 0° (negative) shifts the cutting forces into a more secure edge configuration for interrupted or heavy-duty turning. The MP3 chipbreaker is optimised for steel, producing controlled chips that lower the risk of built-up edge and help maintain consistent surface integrity. Application focus: efficient steel machining with predictable results Designed specifically for ISO P applications, the insert is intended for unalloyed and alloyed steels where typical heat generation and chip formation are expected. The WPP05G sort balances wear resistance and toughness to cope with varied steel grades; this makes the insert suitable for a wide range of turning tasks from medium finishing to more demanding roughing operations. The M tolerance class provides dimensional consistency for repeatable set-ups and dependable performance in production environments. Installation, compatibility and selection guidance The DNMG format signifies compatibility with standard DNMG toolholders, enabling straightforward integration into existing turning tool systems. With the plate thickness code 04 and the DNMG150412 configuration, assembly into a matching negative-mount pocket is standard practice. When selecting the insert, consider the corner radius for the required surface finish and the MP3 chipbreaker for chip control; keeping cutting parameters aligned with ISO P recommendations will maximise the benefits of the Tiger·tec Gold coating and the WPP05G grade. For reliable, high-productivity turning with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for application advice and fast supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DNMG150412-MP3-WPP05G-WALTER Article designation: DNMG150412-MP3 WPP05G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Dimensions and core data Insert format: 15 Thickness code: 04 Corner radius: 1.2 mm Free angle: 0° (negative) Design and special features Coating: Tiger·tec Gold Grade: WPP05G Chipbreaker: MP3 Series: Tiger-tec Gold Material application: Steel (ISO P) Tolerance class: M Plate form: Rhombus 55° Execution: G FAQ Which materials is this insert intended for? The DNMG150412-MP3 WPP05G is designed for steel machining (ISO P), optimised for the heat and chip behaviour typical of unalloyed and alloyed steels. What is the effect of the MP3 chipbreaker? The MP3 chipbreaker on this Walter Tools insert controls chip shape when turning steel, aiding safe evacuation and reducing the likelihood of built-up edge for more consistent surface finish. How does the 1.2 mm corner radius influence results? A 1.2 mm corner radius increases edge strength and improves stability under heavier cuts, while still allowing satisfactory surface quality for many finishing and semi-finishing operations. Is this insert compatible with standard DNMG holders? Yes, the DNMG150412-MP3 format matches standard DNMG toolholders, allowing straightforward replacement and integration into existing turning tool systems. What are the main benefits of the Tiger·tec Gold grade? Tiger·tec Gold provides enhanced wear resistance and thermal stability, which contributes to predictable tool life and reduced downtime in steel turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150412-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP3 chipbreaker to achieve consistent, cost-effective steel turning with reliable wear resistance; order this insert through Metav Werkzeuge or consult their specialists for application-specific cutting data. DNMG150412-MP3 WPP10G turning insert — Tiger·tec Gold, 0° negative rake (Walter Tools) A DNMG150412-MP3 WPP10G turning insert optimised for steel turning, combining a wear-resistant Tiger·tec Gold grade with a stable MP3 chipbreaker for predictable production results Tiger·tec Gold coating for extended tool life MP3 chipbreaker for consistent chip control Designed for ISO P (steel) machining Rhombic 55° form with 1.2 mm corner radius Longer runtimes through advanced coating technology The combination of the Tiger·tec Gold multi-layer coating and the WPP10G carbide grade delivers a clear productivity advantage for steel applications. The coating is engineered to improve thermal stability and reduce abrasive wear, which means more parts per edge and fewer tool changes. For operations that prioritise throughput, this results in a measurable reduction in downtime and consumable costs while maintaining repeatable dimensional performance. Stable cutting behaviour and reliable chip control The insert’s MP3 chipbreaker and Rhombic 55° geometry provide controlled chip formation during medium to heavy cuts. The 1.2 mm corner radius supports edge strength for interrupted cuts, while the negative 0° rake produces a robust cutting edge that resists chipping under high mechanical loads. Together these features enable steady cutting forces and an improved surface finish, which is particularly beneficial when switching between roughing and semi-finishing operations. Practical advantages for workshop efficiency Classified for ISO group P, the insert is made for machining unalloyed and alloyed steel, accommodating the heat and chip characteristics typical of these materials. The standardised DNMG shape simplifies toolholder setup and inventory management in batch production environments. For shops seeking predictable tool life and easy insert indexing, the hardened coating and optimised chipbreaker reduce the need for frequent parameter adjustments. For guidance on feeds and speeds or to select complementary grades for stainless or non-ferrous work, Metav Werkzeuge can provide application data and recommendations. Contact Metav Werkzeuge for cutting data tailored to specific steel grades and to source the Walter Tools DNMG150412-MP3 WPP10G turning insert directly from stock Technical data Article number: DNMG150412-MP3-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150412-MP3 WPP10G Walter Tools SKU: DNMG150412-MP3-WPP10G-WALTER Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Corner radius: 1,2 mm Plate size: 15 Thickness code: 04 Free angle: 0° (negativ) Tolerance class: M Plate form: Rhombus 55° Special features Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: MP3 Material designation: P (steel applications) Execution: G ISO designation: DNMG150412-MP3 WPP10G FAQ Which materials are recommended for this insert? The DNMG150412-MP3 WPP10G insert is specified for ISO P materials, meaning it is suitable for machining unalloyed and alloyed steel where the grade’s heat and chip behaviour are expected. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade enhances thermal resistance and wear control, extending edge life and improving productivity in steel turning tasks. When is the MP3 chipbreaker most effective? The MP3 chipbreaker is optimised for stable chip formation during medium to heavy cutting; it supports consistent swarf evacuation and improved surface quality in varied steel operations. How does the 0° negative rake affect performance? A negative 0° rake creates a stronger cutting edge that tolerates higher mechanical loads and interrupted cuts, contributing to greater edge robustness and tool life. Is this insert suitable for finishing passes? Yes; with appropriate feed and speed selection, the combination of its geometry and coating enables both semi-finishing and finishing passes while maintaining surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
DNMG150412-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating, an MP3 chipbreaker and a rhombic 55° geometry delivers consistent productivity and reliable edge life for steel turning operations; the robust 1.2 mm corner radius supports heavier cuts while the negative 0° rake stabilises chip flow — Order the DNMG150412-MP3 WPP20G turning insert directly via Metav Werkzeuge or ask our consultants if needed DNMG150412-MP3 WPP20G turning insert for steel — Walter Tools The DNMG150412-MP3 WPP20G is a negative-geometry, rhombic 55° turning insert designed for general steel machining with a focus on stable chip control and extended tool life. Tiger·tec Gold coating for extended life MP3 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning Corner radius 1.2 mm for robust edge High productivity through optimised coating and chip control The combination of the Tiger·tec Gold coating and the MP3 chipbreaker is engineered to increase process stability during steel machining. The coating reduces flank wear and improves heat resistance, which translates into longer tool life and fewer indexings. The chipbreaker promotes short, consistent chips that reduce the risk of entanglement and improve surface finish. These technical choices aim to lower overall machining costs by reducing downtime and conserving machine hours while maintaining throughput. Geometry that balances versatility and strength The rhombic 55° shape with a 1.2 mm corner radius and 0° negative rake offers a balance between precision and robustness. The rhombic geometry supports both turning and light profiling, while the larger corner radius enhances edge strength for interrupted cuts or heavier feed rates. The negative rake provides a stronger cutting edge which is advantageous for stable roughing passes. For customers unfamiliar with insert geometry, this means fewer insert changes and a simpler tooling setup for mixed turning tasks. Suitable for a wide range of steel applications Specifically designed for the material group P, the insert’s substrate and coating combination is tuned to handle unalloyed and alloyed steel grades commonly encountered in general engineering and production environments. The WPP20G grade is a coated carbide formulation that prioritises wear resistance and a broad workpiece compatibility. For shops seeking a reliable general-purpose solution, this grade minimises the need for multiple specialised inserts and supports consistent part quality across batch runs. Integration into tooling systems and process planning The insert follows standard DNMG dimensions and can be used in compatible toolholders for indexable turning inserts. Tooling setup benefits from the insert’s predictable performance: fewer unexpected failures, consistent chip form and stable surface finishes. When planning feeds and depths of cut, consider the insert’s robust edge geometry for moderate to heavy passes and use the MP3 chipbreaker to maintain safe chip evacuation. For detailed cutting parameters, consult tooling charts or Metav Werkzeuge’s application support to align speeds and feeds with machine capabilities. Contact Metav Werkzeuge for application advice and to arrange supply of the DNMG150412-MP3 WPP20G from Walter Tools; technical consultation and ordering assistance are available via Metav Werkzeuge Technical data Article number: DNMG150412-MP3-WPP20G-WALTER SKU: DNMG150412-MP3-WPP20G-WALTER Product type: Turning insert (indexable) Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Insert shape: Rhombic 55° Insert size: 15 Corner radius: 1.2 mm Thickness code: 04 Chipbreaker: MP3 Rake angle: 0° (negative) Tolerance class: M Material group suitability: P (steel) Special features Coating technology: Tiger·tec Gold (coated carbide) Geometry: negative for robust edge strength Application focus: versatile steel machining Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The DNMG150412-MP3 WPP20G is designed primarily for the P group (steel); the WPP20G grade and Tiger·tec Gold coating optimise wear resistance and chip control in steel machining. What does the MP3 chipbreaker provide in practice? The MP3 chipbreaker on this insert produces short, controllable chips and contributes to safer chip evacuation and improved surface finish during standard turning operations. Is the insert suitable for heavy roughing cuts? Yes, the combination of a 1.2 mm corner radius and negative 0° rake gives enhanced edge strength that suits heavier feeds and interrupted cuts within the insert’s application range for steel. Can this insert be used in standard DNMG toolholders? The DNMG designation indicates compatibility with the corresponding DNMG indexable turning toolholders; ensure the holder accepts the specified insert seat and clamp style. What advantages does the Tiger·tec Gold series offer? Tiger·tec Gold provides improved heat resistance and wear performance in coated carbide grades, which helps extend tool life and maintain consistent results over production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned solely for explanatory purposes. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer Walter Tools.
DNMG150412-MP3 WPP30G G Wendeplatten - Walter Tools
High wear resistance and dependable chip control make the DNMG150412‑MP3 WPP30G an efficient choice for steel turning, combining the Tiger·tec Gold coating with the MP3 chipbreaker to extend tool life and improve process stability. Order the insert directly via Metav Werkzeuge or consult their application experts for tailored machining advice. DNMG150412-MP3 WPP30G turning insert – Tiger·tec Gold for steel | Walter Tools The DNMG150412-MP3 WPP30G is a single‑sided indexable turning insert engineered for productive steel machining in ISO P applications. Tiger·tec Gold coating for high wear resistance Grade WPP30G optimised for steel machining Rhombic 55° shape with 1.2 mm corner radius Negative 0° rake with MP3 chipbreaker for stable chips Increase machining uptime with a wear‑resistant grade The combination of the Tiger·tec Gold coating and the WPP30G grade delivers measurable improvements in wear resistance and tool life. Designed for the thermal and mechanical demands of steel cutting, the coated hardmetals reduce flank and crater wear, so machining cycles remain productive for longer. The result is fewer insert changes and higher overall throughput, which supports an efficient production schedule and consistent component quality. Geometry that guarantees process stability under load The rhombic 55° geometry and the 1.2 mm corner radius provide a robust cutting edge suited to a variety of turning operations. The 0° negative rake increases edge strength and allows the insert to withstand heavier depths of cut without chipping, making it suitable for semi‑roughing and finishing passes where stability is crucial. These geometric choices contribute directly to predictable tool behaviour and reduced scrap rates in demanding shop environments. Controlled chips and improved surface quality for steel The integrated MP3 chipbreaker is tuned for ISO P (steel) applications and promotes short, controllable chip formation even at variable cutting parameters. That control helps maintain a consistent contact zone and improves surface finish on workpieces, while reducing the risk of chip entanglement in automated setups. Using an insert designed for the material group ensures that cycle times and costs per component remain competitive. Seamless integration into productive tool systems Marked with the ISO designation and produced to tolerance class M, this indexable insert fits standard DNMG toolholders and is compatible with established tool‑holder programs. The combination of a reproducible coated grade and a well‑defined chipbreaker simplifies grade selection and process documentation in series production. For workshops aiming at process reliability, the insert offers a balance of productivity and repeatable accuracy, backed by Walter Tools' manufacturing standards. Contact Metav Werkzeuge for tailored application advice on Walter Tools' Tiger·tec Gold inserts and to place an order via their technical sales team. Technical data Article number: DNMG150412-MP3-WPP30G-WALTER Label: Drehwendeschneidplatte DNMG150412-MP3 WPP30G Walter Tools Product type: Turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Version: G Core specifications Size: 15 Corner radius: 1.2 mm Thickness code: 04 Rake angle: 0° (negative) Insert shape: Rhombic 55° Chipbreaker: MP3 Tolerance class: M Materials & special features Coating technology: Tiger·tec Gold Material suitability: P (steel) Application focus: steel machining per ISO 513 Execution detail: G Series description: coated carbide grade for productive steel cutting FAQ Which materials is this insert designed for? This insert is optimised for steel (ISO group P); the WPP30G grade and Tiger·tec Gold coating suit unalloyed and alloyed steels in turning operations. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance and thermal stability, extending service life and supporting consistent machining performance with the DNMG150412‑MP3 WPP30G. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker produces short, controllable chips in steel turning, improving surface finish and reducing chip management issues in automated or manual turning processes. What does a 0° negative rake mean for cutting conditions? A 0° negative rake enhances edge strength and allows for more robust cutting conditions, enabling heavier cuts and improved reliability when machining tougher sections of steel. Is this insert compatible with standard toolholders? Yes, the insert follows DNMG geometry and tolerance class M, making it compatible with conventional DNMG toolholder systems for turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners and are mentioned for explanation only; there is no affiliation between our company and the named brands.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com