29mm Core Drill HSS 30mm Cutting Depth Weldon Shank - Ruko GmbH
Benefit from the combination of HSS construction, a 29 mm cutting diameter and a robust Weldon shank for reliable hole-making in structural and light-metal workpieces; order the core drill directly via Metav Werkzeuge or ask our consultants if needed. RUKO annular cutter 29 mm (HSS) – 30 mm cutting depth, Weldon shank The RUKO annular cutter 29 mm is a high-performance HSS core drill engineered for fast, clean through-hole cutting in steel, cast iron and non-ferrous materials, suited to production and workshop use. HSS high-performance steel construction 29 mm cutting diameter for larger holes 30 mm cutting depth for efficient passes Weldon shank 19.05 mm (3/4") for secure clamping Faster, more efficient hole-making for production lines The annular cutter is designed to remove a narrow ring of material rather than the full core, which reduces machining time and power draw. The 29 mm cutting diameter combined with a 30 mm cut depth allows for swift through-hole creation in structural steels and plate materials. Because the tool cuts only the material at the hole perimeter, chip evacuation is improved and the required feed force is lower, resulting in shorter cycle times and less wear on the machine spindle. This makes the cutter particularly effective for repetitive operations and CNC-equipped drilling rigs. Durable cutting performance and predictable tool life Made from HSS, the cutter offers a balanced combination of toughness and red-hardness that suits intermittent drilling and tougher workpiece materials. The tool has eight flutes to distribute cutting loads and produce consistent chips; this geometry helps maintain cutting edge integrity across repeated cycles. The solid construction of the cutter means repair or regrinding is feasible where appropriate, extending service life and reducing total tooling cost. In everyday workshop use, the result is a reliable tool that supports steady production without unexpected tool failures. Secure mounting and simplified handling on magnetic and conventional drill rigs The Weldon shank (19.05 mm / 3/4") provides a positive, abrasion-resistant contact surface for set-screw clamping systems commonly found on magnetic drilling machines and arbors. This reduces slippage under higher torque and eases tool changes during busy shifts. The shank standard also facilitates compatibility with a wide range of arbors and adaptors, enabling rapid integration into existing toolchains. Clear identification of shank size simplifies inventory management and reduces downtime during tool swaps. Material versatility and application guidance This cutter is specified for use in steel (including structural sections and large-format plate), cast iron, and a variety of non-ferrous and light metals. The geometry and material choice make it suitable for typical construction and fabrication tasks where clean, burr-minimised holes are required. For optimal results, use appropriate cutting fluid and a correct arbor with secure Weldon clamping; during intermittent high-speed operations the HSS grade offers a good compromise between wear resistance and toughness, avoiding premature chipping in mixed-material workloads. Contact Metav Werkzeuge for tailored technical advice or to arrange supply of this RUKO annular cutter and compatible arbors; Metav's consultants can confirm suitability for specific applications and delivery options Technical Data Article number: 4000602308NW Manufacturer: Ruko GmbH Product type: annular cutter (core drill) Material: HSS Cutting edges: 8 Packaging unit: 1 Facts Diameter: 29 mm Overall length: 63 mm Cutting depth: 30 mm Weldon shank diameter: 19.05 mm (3/4") Special features Weldon shank for set-screw clamping Suitable for steel, cast iron, non-ferrous and light metals Designed for clean chip evacuation and efficient ring cutting FAQ What materials can this annular cutter machine handle? The RUKO annular cutter 29 mm is suitable for steel (including structural plate), cast iron and various non-ferrous and light metals, making it versatile for fabrication and on-site drilling tasks. Which shank size is required for clamping this tool? The cutter uses a Weldon shank of 19.05 mm (3/4"), requiring a set-screw clamp or arbor compatible with that shank diameter for secure mounting. How deep can the cutter cut in a single pass? The tool offers a cutting depth of 30 mm, which is specified for efficient through-hole creation in typical workshop materials. Is the cutter regrindable or refurbishable? Constructed from HSS with robust flute geometry, the cutter can be reconditioned where appropriate; regrindability depends on wear pattern and workshop capabilities. What is the article number for ordering or reference? The SKU for this RUKO core drill is 4000602308NW and should be used for ordering and technical enquiries. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
30mm Core Drill DURA 25 TiN Coated 25mm Cutting Depth Quick IN Shank - C. & E. Fein GmbH
Take advantage of the combination of robust HSS construction, TiN coating for extended life and low friction, and a Quick IN 18 mm shank for fast tool changes to keep production running smoothly; order the tool directly via Metav Werkzeuge or consult their specialists for compatibility and availability DURA 25 Core Drill — 30 mm, TiN-coated, Quick IN shank (Fein) The DURA 25 core drill is a compact HSS cutting tool designed for precise holemaking in production and workshop environments, featuring a TiN coating and a Quick IN 18 mm shank for rapid tool changes HSS construction with TiN coating Quick IN 18 mm shank for fast changes 30 mm diameter for accurate core holes 25 mm cutting depth for common hole tasks Consistent cutting life through efficient coating and material choice Made from HSS and finished with a TiN coating, this core drill delivers enhanced wear resistance and reduced friction compared with uncoated tools. The coating lowers heat generation at the cutting edge and improves sliding behaviour during entry and exit, which translates into fewer tool changes and less downtime. For workshops aiming to increase throughput, the combination of high-speed steel and titanium nitride provides a pragmatic route to improved tool economy while maintaining predictable performance. Rapid set-up and precise hole control with Quick IN shank The integrated Quick IN shank (18 mm) simplifies mounting and replacement in tool holders that accept quick-change shanks, reducing non-productive time during batch work. With a 30 mm diameter and a 25 mm cutting depth, the cutter is configured for shallow to moderate core holes; the overall length of 60 mm ensures adequate reach while preserving rigidity. The geometry with eight cutting edges supports stable chip formation and surface finish, so operators achieve repeatable hole sizes and consistent edge quality in metric dimensions. Practical fit for production floors and small workshops Designed with metric dimensions and a focus on straightforward handling, this core drill suits general metalworking applications where reliability and speed are priorities. The compact profile and coated cutting surfaces ease maintenance cycles and are compatible with workflows that demand quick turnover between operations. For procurement teams and workshop managers seeking to reduce supplier complexity, the tool integrates smoothly into existing setups and supports efficient inventory management without compromising on cutting performance. For purchasing advice or stock information on the Fein DURA 25 core drill with Quick IN shank, contact Metav Werkzeuge for personalised guidance and local availability Technical Data Article number: 4149702568NW Type: DURA 25 Product: Core drill (Kernbohrer) Manufacturer: C. & E. Fein GmbH Facts Diameter: 30 mm Cutting depth: 25 mm Overall length: 60 mm Cutting edges: 8 Shank: Quick IN, 18 mm Special features Material: HSS Coating: TiN Metric dimensions Quick IN shank for fast tool change Designed for improved stand time and glide properties FAQ What cutting depth and hole diameter does this tool provide? The DURA 25 core drill features a 30 mm diameter with a 25 mm cutting depth and an overall length of 60 mm, making it suitable for standard core-hole applications. What is the benefit of the TiN coating on this core drill? The TiN coating on the DURA 25 reduces friction and improves wear resistance, which supports longer service life and more consistent cutting performance under typical workshop conditions. How does the Quick IN shank affect workflow? The Quick IN 18 mm shank enables fast mounting and removal in compatible holders, lowering setup times and increasing productive machining time for the DURA 25 core drill. How many cutting edges does the cutter have and why does it matter? This cutter has eight cutting edges, which helps to stabilise chip formation and deliver improved surface finish and dimensional stability. Is this tool suitable for series production and frequent tool changes? Yes, the combination of HSS material, TiN coating and the Quick IN shank makes the tool well suited to repetitive operations where fast changeover and reliable tool life are important Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Core Drill HSS 25mm Cutting Depth Weldon Shank 3/4" - C. & E. Fein GmbH
Benefit from the combination of HSS durability, a 30 mm diameter for precise core holes and a Weldon 19.05 mm shank for secure clamping; order the NOVA 25 directly via Metav Werkzeuge or ask our consultants for tailored assistance. NOVA 25 Core Drill (30 mm, HSS, 25 mm cutting depth) by Fein NOVA 25 — an HSS core drill with a 19.05 mm Weldon shank designed for reliable 25 mm cutting depth in industrial drilling tasks 30 mm diameter for precise core holes 25 mm cutting depth for controlled drilling HSS construction for high wear resistance Weldon 19.05 mm shank for secure clamping Reliable cutting performance for repeatable hole quality The core drill is manufactured from HSS, providing consistent hardness and wear resistance that supports prolonged use in workshop and production environments. With eight cutting edges, the flute geometry balances efficient material removal and stable cutting forces, which helps to maintain hole roundness and surface finish over many cycles. The specified 25 mm cutting depth allows for controlled penetration without excessive overshoot, reducing the risk of rework and ensuring predictable cycle times in repetitive operations. Secure clamping and straightforward tool change for productivity A Weldon 19.05 mm shank (3/4") ensures the tool is held securely in standard Weldon holders, minimising slippage under torque and enabling fast tool swaps during shift changes. The total length of 61 mm offers a compact reach that suits confined set-ups and short-stack operations, while the robust shank design supports high axial loads. These mechanical characteristics reduce downtime and simplify fixture planning, making the core drill a pragmatic choice for busy workshops that require dependable, repeatable performance. Workshop-ready specification and supply reliability The design focuses on pragmatic workshop benefits: a 30 mm hole capacity for common core-drilling tasks, a compact overall dimension for easy storage, and HSS metallurgy for general-purpose durability. Supplied as a single unit with a Weldon shank, the tool fits seamlessly into existing tooling systems. Metav’s distribution from Emmerich acts as a quality filter and reliable source of supply, helping to keep production running and procurement simple for maintenance teams and purchasing departments alike. For secure, industrial-grade core drilling with Fein quality and a Weldon shank, contact Metav Werkzeuge for advice and fast supply from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 8000380279NW Manufacturer: C. & E. Fein GmbH Product type: Core drill Material: HSS Diameter: 30 mm Cutting depth: 25 mm Total length: 61 mm Shank: Weldon 19.05 mm (3/4") Number of cutting edges: 8 Packaging unit: 1 Numbers Diameter: 30 mm Cutting depth: 25 mm Total length: 61 mm Shank diameter: 19.05 mm Number of cutting edges: 8 Packaging unit: 1 Special features HSS construction Weldon shank 19.05 mm (3/4") High service life (wear-resistant design) Compact overall length for confined setups Single-piece supply FAQ What shank size does this core drill require? The NOVA 25 core drill from Fein is supplied with a Weldon 19.05 mm (3/4") shank suitable for standard Weldon holders; reference SKU 8000380279NW. Is the drill suitable for repeated production drilling? Yes, the HSS construction and eight cutting edges of the NOVA 25 provide wear resistance and stable cutting performance for repeated workshop and light production use. How deep can the tool cut in a single pass? The tool is specified with a 25 mm cutting depth, which gives controlled penetration for common core-drilling tasks without excessive overreach. What are the handling benefits of the Weldon shank? The Weldon 19.05 mm shank ensures secure clamping and quick tool changes, reducing slippage under torque and simplifying holder compatibility. Is the NOVA 25 supplied as a single item or in sets? The product is supplied as a single unit; packaging unit is 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Core Drill HSS 30mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
Take advantage of robust high-speed steel performance combined with a secure Weldon mounting and a practical 30 mm cutting depth for efficient production drilling. Order the tool directly via Metav Werkzeuge or request specialist advice from the Metav consultants. RUKO annular cutter Ø30 mm, HSS, 30 mm cutting depth RUKO annular cutter Ø30 mm, HSS, Weldon shank designed for fast, clean core drilling in structural steel and non-ferrous components Solid HSS construction, industrial grade 30 mm cutting depth for through-holes Weldon shank 19.05 mm (3/4") for secure clamping Suitable for steel, cast iron and non-ferrous metals Reliable high-speed steel construction for consistent holes The RUKO annular cutter Ø30 mm is manufactured from HSS, offering a balance of toughness and heat resistance suited to repetitive drilling in demanding shop environments. The high-speed steel body maintains cutting geometry under load, which helps to secure consistent hole quality when working with steel, cast iron and various non‑ferrous metals. For procurement and process planning, the tool’s specification supports predictable cycle times and reduces the need for exploratory trials on critical parts, contributing to smoother production workflows. Secure clamping and dimensioned design for stable operation A Weldon shank with a diameter of 19.05 mm (3/4") provides rigid mounting in compatible arbors and holders, reducing vibration and improving concentricity during holemaking. The cutter’s 30 mm cutting depth paired with a 63 mm overall length leaves sufficient margin for secure chucking while allowing full engagement of the cutting edges. With 8 cutting edges, chip formation is distributed across multiple teeth, which can lower cutting forces and promote steady advance rates—advantages that translate into faster hole cycles and reliable repeatability in production settings. Application focus and practical purchasing support This annular cutter is intended for through-hole core drilling in structural components such as T‑beams and large-format sheet metal, as well as in castings and lighter non-ferrous materials where smooth bore walls are required. The Weldon shank supports quick tool changes in standard holders. For technical clarification on fitment or to confirm suitability for a particular machine or arbor, Metav’s technical advisors are available by email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930; prompt guidance ensures the tool choice aligns with the intended application and production parameters. Procure RUKO annular cutters through Metav Werkzeuge for reliable supply and expert advice—contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and availability Technical data Article number: 4000602309NW Label: Kernbohrer D.30mm HSS Schnitt-T.30mm Weldon RUKO Dimensions & numbers Diameter: 30 mm Cutting depth: 30 mm Overall length: 63 mm Cutting edges: 8 Weldon shank: 19.05 mm (3/4") Features and applications Material: HSS Suitable for: steel, cast iron, non‑ferrous and light metals Shank type: Weldon Packaging unit: 1 Brand: RUKO GmbH FAQ What materials is this annular cutter suitable for? The RUKO annular cutter is specified for steel, cast iron and non‑ferrous metals, matching common workshop and fabrication needs. What is the effective cutting depth of the tool? The cutter provides a 30 mm cutting depth, with an overall length of 63 mm for secure mounting and full tooth engagement. Which shank type is used and what holder size is required? A Weldon shank of 19.05 mm (3/4") is supplied; holders and arbors accepting a 3/4" Weldon shank will secure the tool. How many cutting edges does the cutter have and what is the benefit? The tool features 8 cutting edges, which help distribute cutting forces and promote steady chip formation for smoother holes. Is this product suitable for structural steel such as T‑beams and large sheets? Yes, the design and HSS construction make the cutter appropriate for through‑holes in structural elements like T‑beams and large-format sheet metal. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
30mm Core Drill HSS 55mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
Take advantage of robust HSS construction, a secure Weldon 19.05 mm (3/4") shank and a 55 mm cutting depth for reliable core drilling in workshop and fabrication environments; order directly via Metav Werkzeuge or consult our advisors for technical guidance. Core drill Ø30 mm, HSS, 55 mm cutting depth — Weldon shank by Ruko The Core drill Ø30 mm, HSS, 55 mm cutting depth is a high-performance core drill for demanding metalworking tasks, designed for use in fabrication, maintenance and heavy workshop applications. High-performance HSS material Weldon 19.05 mm (3/4") shank for stable clamping 55 mm cutting depth for deep cores Suitable for steel, cast iron and non‑ferrous metals Exact material performance for demanding metals Manufactured from HSS, this core drill delivers consistent cutting performance when working with structural steel, cast iron and a range of non‑ferrous and light metals. The 30 mm diameter combined with a 55 mm cutting depth enables precise core removal in applications such as large-format plate work and structural sections. Using high-speed steel ensures a balance between toughness and wear resistance, which supports longer interval times between tool changes and reduces downtime in production. Stable clamping and machine compatibility for safer operation The Weldon shank design at 19.05 mm (3/4") provides secure engagement in standard Weldon holders and compatible chucks, reducing slippage under load and lowering the risk of runout. Stable clamping translates into improved surface quality of the drilled core and safer operation on radial drills or drill presses that accept Weldon tooling. This mechanical interface supports repeatable positioning and consistent concentricity, which is particularly important when preparing mating faces or bolt holes. Efficient geometry and controlled chip evacuation Equipped with eight cutting edges, the geometry promotes effective material removal and cleaner core extraction, which reduces rework and accelerates throughput. The cutting-edge arrangement balances cutting forces and aids chip control in mixed-metal applications, improving heat distribution and extending the serviceable life of the tool. Where necessary, operators can pair the drill with appropriate coolant or cutting fluid to maintain performance during extended runs. Practical application guidance for workshop use This core drill is intended for professional environments such as fabrication shops, plant maintenance and metalworking contractors, where the combination of durability and straightforward handling matters. Typical tasks include drilling through T‑beams, large plates and assemblies made from steel, cast components and brass or aluminium workpieces. The tool’s design simplifies setup in standard Weldon holders and integrates well into existing machining workflows, making it a pragmatic choice for busy workshops. For robust, repeatable core drilling choose the Ruko core drill with Weldon shank and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and supply. Technical data Article number: 4000602461NW Label: Kernbohrer D.30mm HSS Schnitt-T.55mm Weldon RUKO Manufacturer: Ruko GmbH Facts Diameter: 30 mm Overall length: 88 mm Cutting depth: 55 mm Cutting edges: 8 Shank: Weldon 19.05 mm (3/4") Special features Material: HSS Suitable for steel (e.g. T‑beams, large‑format sheets) Suitable for cast iron Suitable for non‑ferrous and light metals Shaft execution: Weldon shank Packaging unit: 1 FAQ What materials can be drilled with this core drill? The Ruko core drill is suitable for steel, cast iron and non‑ferrous metals; its HSS construction supports those common fabrication materials. Is the shank compatible with standard Weldon holders? Yes, the Weldon 19.05 mm (3/4") shank is designed for secure clamping in standard Weldon holders and compatible chucks. What is the effective cutting depth of the tool? The tool provides a 55 mm cutting depth for the 30 mm diameter core, allowing deep core removal in structural and plate applications. How many cutting edges does the drill have and why does that matter? The drill has eight cutting edges, which helps to balance cutting forces and improve chip control for cleaner cores and longer tool life. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
30mm Core Drill Solid Carbide 50mm Cutting Depth Quick IN Shank - Ruko GmbH
Take advantage of a solid carbide design with six cutting edges and a 50 mm cutting depth to tackle high-strength and abrasive steels with fewer tool changes; order directly via Metav Werkzeuge or contact our consultants for application advice and compatibility details. Ruko Core Drill D30 mm, Solid Carbide – 50 mm Cut Depth, Quick IN Shank The Ruko Core Drill D30 mm is a solid carbide core drill engineered for heavy-duty industrial drilling in steels, cast materials and abrasion-resistant plates, equipped with a Quick IN 18 mm shank for fast tool changes Solid carbide construction for long life 50 mm cutting depth for through and deep-hole work Quick IN 18 mm shank for rapid change systems Suited to Hardox/Weldox and stainless steels High-performance drilling for the toughest materials The solid carbide construction combined with six cutting edges delivers consistent chip formation and extended service life in abrasive and high-strength materials. A 30 mm diameter and 50 mm cutting depth provide a reliable working window for core extraction and through-drilling, while the overall length of 83 mm maintains rigidity during operation. For machining tasks where material hardness and continuity of production are critical, this core drill reduces interruptions and conserves machine time by sustaining cutting geometry across multiple passes. The result is improved process stability and predictable tool change intervals, which supports efficient shop-floor planning. Built for demanding industrial applications and diverse materials Application versatility is a key benefit: the tool is specified for use on railway rails, Hardox/Weldox 400 abrasion-resistant steels, general steel, cast steel and high-chrome stainless steels such as V2A and V4A. The Quick IN 18 mm shank enables fast, secure mounting in compatible chucks and adaptors, reducing non-productive time when changing tooling for different operations. Where conventional drills struggle with heat or wear, the carbide composition maintains cutting performance, meaning fewer replacements and a steadier hole quality in challenging production environments. Reliability, precision and cost-effective operation By combining wear-resistant material with a robust geometry, the cutter offers consistent hole quality and reduced burr formation, leading to less rework and cleaner assemblies. The compact overall length and sturdy shank design contribute to axial stability, improving concentricity and finishing results in a single pass. From a rational perspective, fewer tool changes and predictable lifetime behaviour translate into measurable gains in throughput and lower unit costs. Additionally, the compatibility with heavy-duty steels makes this tool a practical choice for workshops and fabricators aiming for precision without compromising operational uptime. Contact Metav Werkzeuge for tailored application support and specification matching for the Ruko core drill with Quick IN shank; our consultants at Metav Werkzeuge can advise on suitable holders and machining parameters to ensure optimal performance Technical data Article number: 4000602638NW Manufacturer: Ruko GmbH Product type: Core drill Facts Diameter: 30 mm Overall length: 83 mm Cutting depth: 50 mm Cutting edges: 6 Shank: Quick IN 18 mm Packaging unit: 1 Materials & applications Solid carbide Suitable for railway rails Suitable for Hardox/Weldox 400 steels Suitable for steel and cast steel Suitable for high-chrome stainless steels (V2A, V4A) Quick IN shank system FAQ What materials can be machined with this core drill? The Ruko core drill is suitable for railway rails, Hardox/Weldox 400, general steel, cast steel and high-chrome stainless steels such as V2A and V4A. What are the key dimensions to consider for setup? Diameter 30 mm, overall length 83 mm and a cutting depth of 50 mm are the core dimensions for fixture and spindle reach planning. How does the Quick IN shank benefit workflow? The Quick IN 18 mm shank enables rapid tool changes and secure clamping, reducing machine downtime during tooling swaps. Is the tool suitable for continuous production on abrasive materials? Yes; the solid carbide composition and six-edge geometry improve wear resistance and are designed to withstand abrasive, high-strength materials. Which industries commonly use this type of core drill? Railway component manufacturers, heavy fabrication shops, and workshops working with abrasion-resistant steels and stainless steel frequently use this drill. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
31mm Core Drill HSS 30mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
Take advantage of the combination of high-performance HSS construction, a 31 mm cutting diameter and a secure Weldon shank for reliable, fast holemaking in a range of metals. Order the tool directly via Metav Werkzeuge or consult the technical team for application advice. Annular cutter Ø31 mm HSS – 30 mm cutting depth, Weldon shank (Ruko) The Annular cutter Ø31 mm HSS is a high-performance core drill designed for efficient holemaking in steel, cast iron and non‑ferrous metals with a robust Weldon shank for secure clamping High-speed steel construction 31 mm diameter for larger holes 30 mm effective cutting depth Weldon shank 19.05 mm (3/4") Faster, more economical holemaking for structural work The HSS construction offers a dependable balance of toughness and edge retention, making the cutter well suited to demanding tasks in structural steel, large plates and cast components. With a 31 mm diameter and a 30 mm cutting depth, the tool removes the need for multiple pilot drills and reduces machining time compared with conventional twist drills. The design with 8 cutting edges supports clean shearing action, which helps to lower cycle times and improves repeatability in production runs. For operations where throughput matters, this tool delivers measurable efficiency gains while maintaining consistent hole quality. Secure clamping and reliable chip control for cleaner results The Weldon shank (19.05 mm / 3/4") ensures firm seating in compatible holders and magnetic drill chucks, reducing vibration and increasing axial stability during cutting. Stable clamping combined with the cutter geometry promotes efficient chip evacuation, which in turn produces clean holes with reduced burr formation and less rework. The shorter cutting depth concentrates cutting forces, allowing lower power draw on portable magnetic drills and stationary units alike; this improves operator control and prolongs tool life under repetitive use. Integrates smoothly into workshop workflows and maintenance routines Designed as a drop-in solution for standard Weldon holders, the tool simplifies tooling changes and minimises setup downtime. The combination of HSS material and the cutter’s geometry means resharpening is an option when wear occurs, extending service life and reducing long‑term tooling costs. For specific workpiece alloys or unusual applications, Metav’s technical advisers can provide guidance on feeds, speeds and coolant strategy to optimise performance. The result is a practical, durable cutting solution that supports steady production and consistent results. Choose Ruko quality for dependable core drilling and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000602310NW Label: Kernbohrer D.31mm HSS Schnitt-T.30mm Weldon RUKO Manufacturer: Ruko GmbH Packaging unit: 1 Core technical data Diameter: 31 mm Cutting depth: 30 mm Total length: 63 mm Cutting edges: 8 Shank: 19.05 mm (3/4") Materials & features Material: HSS Shank type: Weldon shank Suitable for: steel, cast iron, non‑ferrous and light metals FAQ Is this annular cutter compatible with magnetic drills? The cutter is supplied with a Weldon shank (19.05 mm / 3/4"), which fits common Weldon holders used on magnetic drills and many portable drill stands. Which materials can be machined with this tool? The Ruko annular cutter is intended for steel, cast iron, non‑ferrous and light metals, offering reliable performance across these common workshop applications. Can the cutter be resharpened? Yes, the HSS construction allows professional resharpening when the cutting edges become dull, extending service life and reducing replacement frequency. What holder or chuck size is required for the Weldon shank? A Weldon holder or chuck accommodating a 19.05 mm (3/4") shank is required to secure the cutter safely and ensure correct axial alignment. How many cutting edges does the tool have and why does that matter? The design features 8 cutting edges, which supports efficient material removal and improved chip formation for cleaner holes and fewer burrs. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
31mm Core Drill NOVA 25 HSS 25mm Cutting Depth, Weldon Shank 19.05mm - C. & E. Fein GmbH
Take advantage of the HSS construction, Weldon shank and 25 mm cutting depth to keep holemaking consistent and productive; order the NOVA 25 core drill directly via Metav Werkzeuge or contact the consultants for application advice. NOVA 25 core drill — 31 mm HSS with Weldon shank by C. & E. Fein GmbH The NOVA 25 is a compact core drill designed for precise metal holemaking in workshop and industrial settings, suitable for assemblies where short, clean cores are required. High-speed steel (HSS) construction Weldon shank 19.05 mm (3/4") Cutting depth 25 mm for precise cores Eight cutting edges for smooth cutting Maintain steady production with fast, precise core cutting The HSS material ensures consistent hardness and wear resistance during repeated drilling cycles, which translates into a stable cutting process and fewer tool changes. With a 31 mm diameter and a 25 mm cutting depth, the tool is optimised for short-core removal tasks where dimensional accuracy and repeatability matter. The tool geometry with eight cutting edges reduces vibration and produces a cleaner bore, supporting predictable cycle times and less rework in metalworking operations. Robust connection and long service life for demanding use A Weldon shank (19.05 mm / 3/4") provides a secure clamping interface for magnetic and machine-mounted chucks, enabling safe torque transmission even under heavy loads. The combination of shank design and HSS construction contributes to a high service life, making the cutter a reliable choice for production runs and maintenance workshops. The overall length of 61 mm keeps the tool compact for tight setups while maintaining adequate reach for most flange and plate applications. Easy integration into existing workflows and tooling Designed as a straightforward holemaking solution, this core cutter fits common Weldon-style holders and requires no special adapters, so integration into existing equipment is rapid and cost-effective. The compact form factor and precise core extraction reduce post-process machining and save handling time. Where process documentation is required, the clear specification of material, diameter and cutting depth supports planning and quality control without ambiguity. Contact Metav Werkzeuge for technical consultation and to secure the NOVA 25 from stock in Emmerich; technical advisors are available by e‑mail or phone for application specifics Technical details Article number: 8000380315NW Product: NOVA 25 core drill Manufacturer: C. & E. Fein GmbH Material: HSS Packaging unit: 1 Measurements Diameter: 31 mm Overall length: 61 mm Cutting depth: 25 mm Weldon shank: 19.05 mm (3/4") Number of cutting edges: 8 Features Weldon shank 19.05 mm (3/4") High service life HSS construction Designed for precise core drilling FAQ What materials can this core drill machine? The NOVA 25 core drill, made from HSS, is intended for use in a wide range of typical workshop metals; for specific alloys and application parameters, consult the Metav Werkzeuge advisors. Is the shank compatible with standard holders? Yes; the Weldon shank (19.05 mm / 3/4") on the NOVA 25 matches standard Weldon-style holders and magnetic drill chucks. How deep can the cutter cut reliably? The tool provides a 25 mm cutting depth, suitable for short core extraction tasks in plates and flanges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31mm Core Drill NOVA 50 HSS 50mm Cutting Depth, Weldon Shank 19.05mm - C. & E. Fein GmbH
High-performance HSS construction combined with a secure Weldon shank (19.05 mm / 3/4") ensures long service life and reliable clamping for demanding core-drilling tasks; the 50 mm cutting depth and 31 mm diameter provide efficient material removal and consistent hole quality. Order the Kernbohrer NOVA 50 directly via Metav Werkzeuge or ask our consultants if needed Kernbohrer NOVA 50 D.31mm Weldon FEIN — HSS annular cutter with 50 mm cutting depth A robust NOVA 50 annular cutter engineered for efficient core drilling in metalworking and industrial workshop environments with a Weldon shank for secure toolholding High-performance HSS construction 50 mm cutting depth for deep cores Weldon shank 19.05 mm (3/4") for secure clamping Eight cutting edges for fast chip removal Faster, more consistent core drilling for production use The annular cutter is manufactured from HSS, which combines toughness and heat resistance to maintain cutting geometry under load. With a 31 mm diameter and a 50 mm cutting depth, this tool removes a material ring rather than grinding the entire hole, reducing spindle load and cycle time. The geometry with eight cutting edges promotes rapid chip formation and evacuation, which translates into shorter machining cycles and fewer tool changes — a tangible efficiency gain for repetitive production tasks. Secure clamping and stability during heavy cuts A key benefit is the Weldon shank (19.05 mm / 3/4"), designed for positive clamping in Weldon-style chucks and holders; this ensures axial and torsional stability even under high torque. The shank style avoids slippage that can occur with smooth-shanked tools, so setups remain reliable across long runs. The combination of a robust shank and a tool body made from HSS contributes to an overall high service life, reducing unscheduled downtime and supporting continuous workshop throughput. Integration into workshop workflows with minimal adaptation The cutter’s metric dimensions and standard Weldon interface make it straightforward to fit into existing toolholders and magnetic drills that accept Weldon shanks. Because the annular cutter produces a solid core rather than turning the whole hole into chips, less effort is required for material removal and cleaning between operations. This technology therefore fits well into setup-driven environments where predictable cycle times and repeatability are priorities. Practical handling, maintenance and compatibility Maintenance focuses on keeping the cutting edges sharp and the Weldon flats free from burrs to preserve clamping security. The tool’s overall length of 86 mm provides sufficient reach for common applications while the Weldon shank simplifies tool changes. Where reconditioning is required after extensive use, the cutter’s straightforward geometry allows professional resharpening, preserving the original cutting profile and extending usable life. This practical life-cycle approach supports sustainable workshop operations. For purchasing advice, availability checks or technical clarification about the NOVA 50 annular cutter, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and delivery options Technical data Article number: 4149702669NW Product type: Annular cutter (core drill) Brand: C. & E. Fein GmbH Material: HSS Facts Diameter: 31 mm Cutting depth: 50 mm Overall length: 86 mm Shank: Weldon 19.05 mm (3/4") Cutting edges: 8 Packaging unit: 1 Special features Weldon shank 19.05 mm (3/4") High service life Metric dimensions HSS construction FAQ What workpiece materials is this annular cutter suitable for? The NOVA 50 annular cutter, made from HSS, is designed for general metalworking core-drilling tasks; material-specific parameters depend on machine power and cutting conditions rather than the SKU alone (4149702669NW). Which drill holders are compatible with the Weldon shank? The Weldon shank (19.05 mm / 3/4") is compatible with standard Weldon-style chucks and holders; the secure flats allow positive clamping for the NOVA 50 and similar annular cutters. Can the cutter be resharpened to extend service life? Yes, the HSS geometry of the NOVA 50 is suitable for professional resharpening, which helps preserve cutting performance and extend usable life under regular maintenance. How does an annular cutter compare to a twist drill for large holes? An annular cutter removes only a material ring, producing a core, which reduces spindle load and cycle time compared with a twist drill of the same diameter; the NOVA 50’s eight cutting edges and 50 mm cutting depth support faster hole production and cleaner cores. What is included in the delivery? Delivery comprises a single annular cutter as specified by the packaging unit (1) for article number 4149702669NW Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Core Drill HSS 25mm Cutting Depth Weldon Shank 19.05mm - C. & E. Fein GmbH
Take advantage of a robust HSS construction combined with a secure Weldon shank and a 25 mm cutting depth for reliable holemaking in metalwork; order directly via Metav Werkzeuge or request tailored advice from our consultants for the best machining setup. NOVA 25 annular cutter, 32 mm Ø, 25 mm cutting depth, HSS, Weldon shank NOVA 25 is an HSS annular cutter designed for efficient metal cutting in production and maintenance environments, suitable for portable magnetic drills and machine-tool applications. HSS construction for high cutting performance Weldon shank 19.05 mm for secure clamping 25 mm cutting depth for through-hole flexibility Faster metal removal with consistent results The annular design reduces drilling time by removing only the material required for the hole, delivering faster cycle times than conventional twist drills. Constructed from HSS, the cutter maintains sharpness under typical workshop feeds and speeds, and the 8 cutting edges contribute to stable chip formation and predictable cutting forces. This results in improved throughput on production runs and reduced rework. Durable shank and geometry for dependable clamping A Weldon shank (19.05 mm) provides a positive mechanical grip in tool holders and magnetic-drill chucks, preventing slippage during high-torque operations. The high service life and robust shank geometry ensure repeatable centreing and concentricity, which helps to preserve workpiece tolerances and reduces tool-change frequency. The overall design supports consistent hole quality over extended production periods. Practical dimensions for workshop versatility With a diameter of 32 mm, a cutting depth of 25 mm and an overall length of 61 mm, the cutter is compact yet capable of producing sizeable holes in a single pass. The combination of the Weldon shank and the cutter geometry simplifies fixturing on portable magnetic drills and machining centres, while the HSS material offers a balance of toughness and wear resistance for general steelworking tasks. The result is a tool that integrates easily into standard workshop workflows. For personalised technical advice or to order the NOVA 25 annular cutter, contact Metav Werkzeuge in Emmerich — specialists will assist with application matching and procurement details Technical data Article number: 8000380320NW SKU: 8000380320NW Product type: Annular cutter Label: Kernbohrer NOVA 25 D.32mm HSS Schnitt-T.25mm Weldon FEIN Manufacturer: C. & E. Fein GmbH Facts Diameter: 32 mm Cutting depth: 25 mm Overall length: 61 mm Cutting edges: 8 Shank: 19.05 mm (3/4") Special features Material: HSS Shank type: Weldon shank High service life Suitable for magnetic drills and machine-tool holders FAQ What materials is this annular cutter suitable for? The NOVA 25 annular cutter, made from HSS, is intended for general metalworking applications; material compatibility depends on machine setup and cutting parameters. Which machines are compatible with the Weldon shank? Chucks and holders accepting a 19.05 mm (3/4") Weldon shank will clamp the cutter securely for use on portable magnetic drills and many machine-tool spindles. How deep can this cutter drill in a single pass? The cutter provides a 25 mm cutting depth, enabling efficient single-pass holemaking for the specified diameter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Core Drill HSS 30mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
The combination of HSS construction, a 32 mm cutting diameter and a Weldon shank delivers robust, consistent holemaking for structural and fabrication tasks; reliable chip formation and a 30 mm cutting depth reduce machining time and extend service intervals. Order the Ruko annular cutter directly via Metav Werkzeuge or ask our consultants if needed. Ruko Annular Cutter D32 mm (HSS, 30 mm cutting depth) – Weldon shank The Ruko Annular Cutter D32 mm is a high-performance HSS core drill designed for efficient holemaking in steelwork, cast components and non-ferrous metals. HSS construction for high wear resistance 30 mm cutting depth for thicker workpieces Weldon shank 19.05 mm (3/4") for secure clamping Faster, cleaner holes in structural steels Constructed from HSS, this annular cutter delivers a balance of hardness and toughness that suits demanding fabrication. The tool's 32 mm diameter and 30 mm cutting depth allow effective penetration of medium-thickness sections while the design with 8 cutting edges produces a clean bore with reduced burr formation. Compared with solid twist drills, the annular principle removes a ring of material rather than the full core, so less power is required and heat buildup is minimised, leading to longer tool life and fewer workpiece reworks. Secure mounting and stable machining The Weldon shank (19.05 mm / 3/4") ensures a positive mechanical lock in compatible holders and magnetic drilling bases, improving concentricity and reducing vibration during cutting. This secure interface supports consistent cutting geometry and makes tool changes straightforward under workshop conditions. The overall length of 63 mm provides sufficient engagement for guided drilling heads while maintaining compact handling, so setup times are shortened and throughput increases in repetitive holemaking tasks. Broad workshop applications and practical benefits Suitable for a wide range of materials—structural steels such as T‑beams and large-format plates, cast steel, and various non‑ferrous and light metals—the cutter supports common fabrication and maintenance operations. The compact cutting depth and efficient chip removal make it a practical choice for on-site metalwork and production environments where cycle time and reproducible hole quality matter. Supplied as a single unit, the tool integrates into existing tooling systems with minimal adaptation and delivers a measurable improvement in process reliability. Choose the Ruko annular cutter for robust, efficient holemaking and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply Technical data Article number: 4000602311NW Label: Ruko annular cutter D32 mm HSS, cutting depth 30 mm, Weldon Manufacturer: Ruko GmbH Product type: Annular cutter Facts Diameter: 32 mm Cutting depth: 30 mm Overall length: 63 mm Shank: 19.05 mm (3/4") Cutting edges: 8 Packaging unit: 1 Special features Material: HSS Shaft execution: Weldon shank 19.05 mm (3/4") Application: steel (e.g. T‑beams, large plates), cast steel, non‑ferrous and light metals Intended use: core drilling / annular cutting FAQ Which materials can this annular cutter process? The Ruko annular cutter is suitable for steel (including structural profiles), cast steel and a range of non‑ferrous and light metals according to the tool’s design and cutting parameters. What is the exact shank size and how is it held? The tool features a Weldon shank of 19.05 mm (3/4"), designed for secure clamping in Weldon adapters and compatible magnetic drilling systems. How deep can the cutter bore in a single pass? The cutter provides a cutting depth of 30 mm with an overall length of 63 mm, which corresponds to the effective depth for standard fabrication tasks. How does an annular cutter differ from a twist drill? An annular cutter creates a ring-shaped cut, removing only the material around the hole perimeter; this reduces required power and chip volume compared with a twist drill, enabling faster, cleaner holes for larger diameters. How many cutting edges does the tool have and what is the benefit? This Ruko core drill has 8 cutting edges, which contribute to smoother cutting action, improved surface finish and a more even distribution of cutting forces. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
32mm Core Drill HSS 55mm Cutting Depth Weldon Shank - Ruko GmbH
Take advantage of a robust combination of HSS construction, 55 mm cutting depth and a secure Weldon shank for dependable, fast holemaking in a wide range of metals; order the annular cutter directly via Metav Werkzeuge or consult our specialists if further specification is required. Annular cutter RUKO 32 mm HSS, 55 mm cutting depth, Weldon shank The RUKO 32 mm annular cutter is a high-performance HSS tool designed for efficient through-hole cutting in steel, cast iron and non‑ferrous metals, suited to workshops and production environments. High-speed steel (HSS) construction 55 mm effective cutting depth Weldon shank 19.05 mm (3/4") fitting Optimised for steel, cast iron and light metals Faster, cleaner holes for structural and sheet applications Manufactured from HSS, this annular cutter produces fast, repeatable holes with less axial force than solid twist drills, reducing cycle times and wear on the machine spindle. The 32 mm diameter and 55 mm cutting depth permit through and deep-hole operations in structural sections and large-format sheets, delivering clean hole walls with minimal burring. For production lines where throughput and hole quality are priorities, the reduced material removal of an annular design translates into quicker feed rates and lower power draw compared with conventional drilling. Secure fixing and steady machining for repeat accuracy The Weldon shank system with a 19.05 mm (3/4") diameter ensures a secure, non-rotational mount in Weldon-style holders and compatible drill chucks, promoting concentricity and consistent results across batches. With 8 cutting edges, the geometry spreads load evenly for smoother cutting action and extended tool life under intermittent and continuous use. The overall length of 88 mm provides sufficient reach for most bench and pillar drilling setups while maintaining rigidity for precise hole position and uniform chamfers. Durable design and versatile material compatibility Constructed for robustness, the tool withstands the demands of steelworking and mixed-material workshops. The high-grade HSS material balances toughness and heat resistance, making the cutter suitable for carbon steels, cast iron and a variety of non‑ferrous and light alloys. The tool’s specification supports both occasional maintenance jobs and regular production use, offering a dependable, long-lived cutting solution when combined with correct feed rates and adequate coolant. Practical advantages for workshop integration Choosing a purpose-built annular cutter reduces rework and post‑drill finishing, thanks to superior chip evacuation and hole quality. The combination of HSS metallurgy and an optimised cutting geometry lowers the risk of premature blunting, while the Weldon mounting enables fast tool changes and secure clamping in common magnetic and pillar drilling setups. For operations seeking predictable performance and straightforward tool handling, this cutter provides an efficient, low‑complexity option. For expert advice on suitability for specific materials and clamping systems, contact Metav Werkzeuge for tailored recommendations and reliable supply from Emmerich. Technical data Article number: 4000602463NW Product: RUKO annular cutter, 32 mm, HSS, 55 mm cutting depth Brand: Ruko GmbH Key measurements Diameter: 32 mm Cutting depth: 55 mm Overall length: 88 mm Shank diameter: 19.05 mm (3/4") Cutting edges: 8 Features / Material and applications Material: HSS Shank type: Weldon shank Suitable for: Steel (e.g. T‑beams, large sheets), cast iron, non‑ferrous and light metals FAQ What materials can this annular cutter machine? The RUKO annular cutter is rated for steel, cast iron and non‑ferrous metals, making it suitable for common structural and fabrication tasks. Is the shank compatible with standard Weldon holders? Yes, the tool uses a Weldon shank 19.05 mm (3/4"), enabling secure clamping in Weldon‑style holders and compatible drill setups. What is the effective cutting depth and diameter? This cutter provides a 55 mm cutting depth at a 32 mm diameter, allowing through-hole operations in thicker components. How many cutting edges does the tool have and why does that matter? The cutter features 8 cutting edges, which distribute cutting forces evenly for smoother operation and improved tool life. Which SKU identifies this item for ordering? Order reference: SKU 4000602463NW, listed under the Ruko annular cutter specification. Ruko GmbH: Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
32mm Core Drill Solid Carbide 50mm Cutting Depth Quick IN Shank - Ruko GmbH
Benefit from a durable solid carbide construction and the quick-change Quick IN shank for reliable, repeatable holemaking in demanding steels; order the Ruko annular cutter directly via Metav Werkzeuge or consult our specialists for application advice. Ruko annular cutter, 32 mm — solid carbide, 50 mm cutting depth The Ruko annular cutter 32 mm is a solid carbide core drill for high-performance metalworking, designed for efficient hole production in a wide range of steels and high-alloy materials. Solid carbide design for extended tool life 32 mm diameter with 50 mm cutting depth Quick IN 18 mm shank for fast tool changes Six cutting edges for efficient metal removal Built for demanding, high-precision metalworking The solid carbide body delivers consistent precision and extended tool life when cutting through challenging materials. As an annular cutter with a 32 mm diameter, it focuses material removal on the periphery of the hole, reducing spindle load and producing clean, true-to-size bores. This construction is particularly beneficial where repeatability and minimal rework are required, helping to maintain production flow and part tolerance. Fast set-up and secure clamping for reduced downtime Equipped with a Quick IN shank (18 mm), the tool enables rapid fitment into compatible tool holders and magnetic drilling systems, shortening changeover times and improving workshop efficiency. The secure shank interface and robust connection reduce the risk of slippage during heavy cutting, contributing to stable machining and predictable cycle times while simplifying tool handling on the shop floor. High cutting performance across tough materials With a 50 mm cutting depth and six cutting edges, the cutter is optimised for efficient metal evacuation and steady cutting in demanding substrates. The design is suitable for applications such as rail profiles, abrasion-resistant steels like Hardox and Weldox 400, general steel grades, cast steel and higher-alloy stainless steels (V2A / V4A). The result is faster hole production with a lower need for secondary finishing, supporting cost-effective component manufacture. Dependable supply and application support for workshop reliability Produced by Ruko for industrial use, the tool combines robust geometry with a form factor that suits standard magnetic drilling operations. For buyers seeking dependable procurement, Metav provides a transparent supply channel from Emmerich, backed by practical advice and a wide product range. This reduces sourcing complexity and ensures continuity of supply for maintenance and production environments. For reliable high-performance drilling with the Ruko annular cutter and tailored application advice, contact Metav Werkzeuge for technical guidance and secure supply from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 4000602640NW Manufacturer: Ruko GmbH Product type: Annular cutter Specifications Material: solid carbide Diameter: 32 mm Overall length: 83 mm Cutting depth: 50 mm Cutting edges: 6 Shank: Quick IN, 18 mm Packaging unit: 1 Special features Suitable for Hardox / Weldox 400 Suitable for steel and steel castings Suitable for high-alloy stainless steels (V2A, V4A) Designed for use with magnetic drilling systems FAQ What materials can this annular cutter machine effectively? The Ruko annular cutter machines various steels, including rail profiles, abrasion-resistant steels such as Hardox and Weldox 400, cast steel and higher-alloy stainless steels (V2A / V4A). Is the Quick IN shank compatible with standard magnetic drills? Yes, the Quick IN 18 mm shank is designed for rapid engagement with compatible magnetic drilling systems and quick-change holders. How deep can the cutter bore in a single pass? The cutter offers a cutting depth of 50 mm, allowing full-depth holes up to this depth in suitable applications. How many cutting edges does the tool have and what is the benefit? The tool has six cutting edges, which improves metal removal efficiency and contributes to cleaner holes and steady cutting performance. Can the cutter be used for series production? With its solid carbide construction and robust shank interface, the cutter is suitable for repetitive holemaking tasks where durability and consistent bore quality are required. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
32mm Core Drill Ultra 35 With HM Tips 35mm Cut Depth, Quick IN Shaft 18mm - C. & E. Fein GmbH
Combining carbide-tipped durability with a Quick IN 18 mm shank and a 35 mm cutting depth delivers fast, precise holes and long tool life for production and workshop use. Order the core drill directly via Metav Werkzeuge or consult the technical advisors for compatibility and availability. Ultra 35 core drill Ø32 mm — carbide-tipped, Quick IN shank (FEIN) The Ultra 35 core drill is a carbide-tipped holemaking tool designed for precision metalworking and heavy workshop use, offering a 35 mm cutting depth and a Quick IN 18 mm shank for rapid tool changes. Carbide-tipped for long service life Quick IN shank 18 mm for fast changeover 35 mm cutting depth for controlled holemaking Six cutting edges for efficient material removal High-performance holemaking for production environments Engineered for reliable performance, the carbide-tipped construction provides wear resistance and sustained cutting quality over repeated cycles. The combination of six cutting edges and optimised flute geometry results in improved chip evacuation and reduced cutting forces, which supports stable, repeatable hole diameters in busy production settings. Where consistent hole quality is critical, this tool reduces rework and keeps process throughput steady. Faster tool changes and reduced downtime The integrated Quick IN shank (18 mm) enables secure locking and swift exchanges in compatible holders, cutting fixture change times and improving overall machine uptime. In batch processing or mixed-production workshops, the efficient changeover reduces non-productive time. The tool’s 32 mm diameter and 77 mm overall length balance reach and rigidity, making it suitable for many bench and machine-mounted drilling applications where change speed and repeatability matter. Durable design that lowers operating costs A focus on longevity means fewer replacements across production runs. The carbide-tipped cutting segments maintain edge geometry under continuous use, which reduces dressing and downtime. The result is a lower total cost of ownership and a predictable maintenance schedule. For operations that prioritise consistent throughput, the tool’s durability translates directly into measurable savings in maintenance and tool consumption. Practical fit for workshop workflows With a 35 mm cutting depth, the tool supports through-holes and thicker-material applications without excessive setup complexity. The balanced geometry ensures controlled cutting in a range of common workshop tasks, while the Quick IN shank allows straightforward integration into existing quick-change systems. Technical teams benefit from straightforward handling, while production planners gain a tool that merges robustness with operational convenience. For procurement or technical compatibility checks regarding the FEIN Ultra 35 core drill, contact Metav Werkzeuge for expert advice and order support — email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 4149702032NW Product type: Core drill Model: Ultra 35 Label: Kernbohrer Ultra 35 D.32mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Facts Diameter: 32 mm Overall length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Shank: Quick IN shank 18 mm Packaging unit: 1 Special features Carbide-tipped Quick IN shank 18 mm Highest service life and excellent cutting performance Metric dimensions Shaft design: Quick IN FAQ Is the Ultra 35 suitable for through-holes in steel? The Ultra 35 core drill is carbide-tipped and designed for robust metal cutting; its 35 mm cutting depth supports through-holes in many standard steel applications, subject to machine power and feed settings. Which shank holder is required for the Quick IN system? The Ultra 35 uses a Quick IN 18 mm shank and requires a compatible Quick IN holder or adapter to ensure secure clamping and safe operation. How many cutting edges does the tool have and what is the benefit? The tool features six cutting edges, which promotes smoother material removal and enhanced chip breaking, supporting consistent hole quality over repeated cycles. What are the key dimensions to check for machine compatibility? Relevant dimensions are the 32 mm diameter, 77 mm overall length and the Quick IN 18 mm shank; verify these against the machine spindle and holder to ensure fit. Can the core drill be resharpened or repaired? The carbide-tipped segments are designed for long life; resharpening depends on wear pattern and workshop capability—consult Metav Werkzeuge for recommendations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Core Drill HSS 25mm Cut Depth Weldon Shank 19.05mm - C. & E. Fein GmbH
Benefit from the combination of HSS construction, a Weldon shank and a compact 25 mm cutting depth for fast, precise holemaking in production and repair work; order the tool directly via Metav Werkzeuge or consult our specialists for compatibility advice. NOVA 25 annular cutter — 33 mm HSS, 25 mm cutting depth, Weldon shank (Fein) The NOVA 25 annular cutter is a high-speed steel core drill designed for efficient holemaking in metalworking applications, suited to machine-mounted drilling operations where speed and repeatability matter HSS construction for long tool life 25 mm cutting depth for through-hole control Weldon shank 19.05 mm (3/4") for secure clamping Eight cutting edges for rapid material removal Faster, cleaner holes with HSS engineering The tool’s HSS composition delivers a balance of toughness and wear resistance, enabling consistent cutting performance under continuous use. With a 33 mm diameter and optimised flute geometry, the cutter removes material efficiently while the eight cutting edges reduce cutting forces and temperate build-up. This engineering translates into fewer reworks and smoother bore finishes, so workshop productivity improves with a direct reduction in cycle time. Secure clamping and machine compatibility for reliable production A Weldon shank of 19.05 mm (3/4") ensures rigid fixation in compatible holders and quick-change adaptors, maintaining runout precision during repetitive cycles. The modest 61 mm overall length and a 25 mm effective cutting depth make the tool ideal for machine-mounted operations where access is limited and repeatability is essential. The combination of shank standardisation and compact dimensions supports stable drilling in production and maintenance environments. Low-maintenance tool life and practical application guidance Designed for durable service, the cutter’s construction focuses on extended life and straightforward use. The robust geometry resists premature wear, helping to keep tool change intervals predictable and maintenance effort low. For optimal results, pair the cutter with a suitable coolant strategy and ensure the Weldon clamping surfaces are free from contamination; these simple measures preserve the tool’s performance and contribute to consistent hole quality. For procurement or technical enquiries regarding the Fein NOVA 25 annular cutter, contact Metav Werkzeuge for tailored advice and ordering support by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: 8000380322NW Model: NOVA 25 Item type: Annular cutter Material: HSS Manufacturer: C. & E. Fein GmbH Packaging unit: 1 Core measurements Diameter: 33 mm Overall length: 61 mm Cutting depth: 25 mm Shank diameter: 19.05 mm (3/4") Cutting edges: 8 Special features Weldon shank design High tool life Compact overall length for machine applications FAQ What is the article number for ordering? The article number is 8000380322NW for the NOVA 25 annular cutter. What material is the tool made from? The cutter is manufactured from HSS, providing toughness and wear resistance. What is the cutting depth of the cutter? The effective cutting depth is 25 mm, suitable for concise through-hole operations. What size is the shank and how is it clamped? The shank is 19.05 mm (3/4") and uses a Weldon-style clamping interface for secure fixation. How many cutting edges does the tool have? The annular cutter features eight cutting edges to improve chip evacuation and cutting efficiency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Core Drill HSS 30mm Cut Depth Weldon Shank - Ruko GmbH
Take advantage of a robust combination of HSS construction, a 33 mm diameter and a 30 mm cutting depth for consistent, fast holemaking; order directly via Metav Werkzeuge or consult the in‑house specialists for application advice. RUKO annular cutter D 33 mm HSS – 30 mm cutting depth, Weldon shank The RUKO annular cutter D 33 mm HSS is a solid high‑speed steel core drill designed for efficient through‑hole cutting in structural steel and light alloys. High-performance HSS material 30 mm cutting depth for through holes Weldon shank 19.05 mm (3/4") Suitable for steel, cast iron and non‑ferrous metals Fast, clean holes with high‑performance HSS The annular cutter is made from HSS, which combines toughness and wear resistance to deliver reliable performance in frequent drilling tasks. With a 33 mm diameter and 30 mm cutting depth, the tool removes only the material required for the hole, reducing chip load and cycle time compared with full‑bore drills. The eight cutting edges distribute cutting forces evenly, producing cleaner bore walls and smaller burrs. For production environments where consistent hole quality and reduced rework matter, this cutter provides a measurable productivity advantage. Secure holding and stable operation for workshop workflows A Weldon shank 19.05 mm (3/4") provides a proven clamping interface for secure retention in compatible holders and adaptors, which supports steady, vibration‑controlled cutting. The 63 mm overall length gives an appropriate balance between reach and rigidity for common fabrication and maintenance tasks. These design choices minimise downtime caused by tool slippage and help maintain repeatability across multiple holes, supporting smoother process flows on jigs or drilling stations. Broad material compatibility for versatile shop use This annular cutter is specified for use in steel (including profiles and large plates), cast iron, non‑ferrous and light metals, making it suitable for fabricators, structural workshops and industrial maintenance. The HSS substrate resists deformation at working temperatures encountered in manual and semi‑automatic drilling operations, preserving cutting geometry over multiple holes. Where a reliable, single‑tool solution for varied metalworking tasks is needed, this cutter combines versatility with robust construction to support demanding applications. For reliable, precision holemaking with a proven RUKO annular cutter, contact Metav Werkzeuge for stock information and technical guidance by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000602312NW Description: RUKO annular cutter D 33 mm HSS, cutting depth 30 mm, Weldon shank Facts Diameter: 33 mm Cutting depth: 30 mm Overall length: 63 mm Cutting edges: 8 Shank diameter: 19.05 mm (3/4") Special features Material: HSS Shank type: Weldon Suitable for: steel (e.g. T‑beams, large plates) Suitable for: cast iron Suitable for: non‑ferrous and light metals Packaging unit: 1 FAQ What materials can this annular cutter machine through? The RUKO annular cutter is suitable for steel (including structural sections and large plates), cast iron, and non‑ferrous and light metals, providing a versatile solution for fabrication and repair tasks. What are the key dimensions and cutting capacity? This tool has a 33 mm diameter, a 30 mm cutting depth and an overall length of 63 mm, matching common requirements for through‑hole production. Which shank does the cutter use and how is it secured? The cutter uses a Weldon shank 19.05 mm (3/4"), designed for secure clamping in Weldon holders to prevent rotation and ensure stable cutting. How many cutting edges does the tool have and why does it matter? With eight cutting edges, the cutter distributes cutting forces effectively to reduce chip load per tooth, yielding cleaner holes and improved efficiency in repeated operations. What is the article number for ordering and specification checks? The article number (SKU) is 4000602312NW and the product is listed as a RUKO annular cutter D 33 mm HSS, cutting depth 30 mm, Weldon shank. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
33mm Core Drill Ultra 35 35mm Cut Depth HM-Tipped Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of a carbide-tipped design and the fast Quick IN 18 mm shank for reduced downtime and consistent hole quality; the 33 mm diameter with a 35 mm cutting depth delivers reliable core drilling performance. Order the tool directly via Metav Werkzeuge or consult the team for technical advice. Ultra 35 core drill – carbide-tipped, Quick IN shank (33 mm) Ultra 35 is a precision core drill designed for efficient production use, combining a carbide-tipped cutting geometry with a Quick IN 18 mm shank for fast tool changes in professional workshops. Carbide-tipped for high wear resistance Quick IN 18 mm shank for fast tool changes 35 mm cutting depth for deep core holes Six cutting edges for smooth chip removal Faster machine cycles through rapid tool changes The integrated Quick IN 18 mm shank enables markedly quicker tool swaps compared with conventional cylindrical shanks, supporting uninterrupted operations and shorter setup times. In technical environments where cycle time is critical, the Quick IN system reduces fixture adjustments and keeps the machining centre running; this rational improvement in process speed translates directly into higher throughput and fewer interrupted jobs. Long-lasting cutting performance thanks to carbide tipping Equipped with a carbide-tipped head and six cutting edges, the core cutter maintains cutting efficiency over extended periods. Carbide tipping increases resistance to abrasive wear, while the multiple-edge geometry promotes steady chip formation and lowers vibration. The combination of these features results in high tool life and consistent hole diameters, reducing rework and ensuring predictable results in series production. Predictable hole depth and industrial compatibility With a 33 mm diameter, 35 mm cutting depth and total length of 77 mm, the tool offers clear dimensional control for metric workflows. The compact overall length and standardised Quick IN connection make the tool straightforward to integrate into existing tool holders and automatic tool-change systems. The result is reliable core drilling that supports quality assurance processes and keeps scrap rates low. Contact Metav Werkzeuge to discuss the Ultra 35 core drill and secure robust carbide-tipped drilling solutions for the workshop; Metav Werkzeuge GmbH is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 4149702033NW Product type: Core drill Manufacturer: C. & E. Fein GmbH Facts Diameter: 33 mm Total length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Shank diameter / type: Quick IN 18 mm Packaging unit: 1 Special features Carbide-tipped (HM) Highest tool life and excellent machining performance Metric dimensions Shaft design: Quick IN FAQ What is the maximum drilling depth with this core cutter? The core cutter offers a cutting depth of 35 mm as specified for the Ultra 35 core drill. Which shank does the tool use and how does it affect compatibility? The tool is fitted with a Quick IN 18 mm shank, intended for holders and tool-change systems that accept Quick IN connections for rapid swapping. What contributes to the tool’s durability? Durability is achieved through the carbide-tipped head and six cutting edges, which together provide high wear resistance and steady chip control for prolonged service life. Is the diameter stated in metric dimensions? Yes, the diameter is metric: 33 mm, with total length 77 mm and a 35 mm effective cutting depth. What is the SKU for ordering or reference? The SKU for this core drill is 4149702033NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
34mm Core Drill HSS 25mm Cutting Depth Weldon Shank 19.05mm - C. & E. Fein GmbH
Take advantage of the combination of HSS durability, a Weldon shank 19.05 mm and a 25 mm cutting depth to maintain steady productivity and long tool life; order the annular cutter directly via Metav Werkzeuge or ask the consultants if needed NOVA 25 annular cutter — HSS, 34 mm diameter, 25 mm cutting depth (C. & E. Fein GmbH) The NOVA 25 is an HSS annular cutter designed for efficient holemaking in metalworking applications, featuring a robust Weldon shank for secure mounting and a 25 mm effective cutting depth for fast through-hole and blind-hole production HSS for extended wear resistance Weldon shank 19.05 mm for secure mounting 25 mm cutting depth for fast holemaking 34 mm diameter for standard hole sizes Consistent cutting life from high-speed steel construction The core advantage of the HSS material is sustained performance under repetitive use: the high-speed steel composition provides wear resistance that keeps the cutting geometry stable over many cycles, which reduces dressing and replacement frequency. Where material knowledge is limited, HSS can be explained as an alloy engineered to retain hardness at elevated temperatures, so the cutter remains sharp during continuous drilling. The result is fewer interruptions and improved process reliability thanks to its long tool life and stable edge retention. Secure, vibration-reducing clamping for accurate holes A decisive practical benefit is the Weldon shank 19.05 mm, which enables positive clamping in Weldon-style holders and magnetic drills. This shank form reduces slippage and minimises runout, translating to straighter holes and less rework in subsequent processes. The shank dimension is a standard interface that supports fast tool changes and reliable torque transfer, meaning set-up time is reduced and machine uptime is increased without sacrificing concentricity. Precise hole geometry with controlled cutting depth With a 34 mm diameter and a defined 25 mm cutting depth, the cutter delivers predictable hole geometry that helps maintain part tolerances. The specified total length of 61 mm supports stable engagement while the annular design removes a ring of material rather than the full core, lowering chip volume and cutting forces. The cutter’s configuration of eight cutting edges distributes load and improves chip formation, giving a consistent finish and less mechanical stress on the host machine. Workshop-ready design for production and maintenance Built by C. & E. Fein GmbH, this annular cutter is aimed at professional workshops that require dependable holemaking tools. The combination of HSS construction, robust shank form and a compact overall length ensures compatibility with common magnetic drilling rigs and machine holders. For procurement and inventory planning, the clear technical specification supports quick integration into tool lists and maintenance schedules, contributing to an uninterrupted workflow and predictable service intervals. Contact Metav Werkzeuge today to check suitability of the Fein NOVA 25 annular cutter for specific applications and to secure prompt delivery from Emmerich Technical data Article number: 8000380300NW Type: NOVA 25 Designation: Kernbohrer NOVA 25 D.34mm HSS Schnitt-T.25mm Weldon FEIN Manufacturer: C. & E. Fein GmbH Product type: Kernbohrer Dimensions & measurements Diameter: 34 mm Total length: 61 mm Cutting depth: 25 mm Shank: Weldon shank 19.05 mm (3/4") Number of cutting edges: 8 Special features Material: HSS High standtime (long tool life) Weldon shank for secure clamping Annular cutter design for reduced chip volume FAQ What machines are compatible with this annular cutter? The NOVA 25 annular cutter fits machines and magnetic drills that accept a Weldon shank 19.05 mm mounting; compatibility depends on the chuck or arbor design used in the drilling unit. Can the cutter produce through-holes and blind holes? Yes, the cutter’s 25 mm cutting depth allows both blind-hole and shallow through-hole applications within that axial range when used with appropriate machine settings. Which materials is the cutter best suited for? The HSS construction of this annular cutter provides general-purpose performance across many ferrous workshop applications; material-specific limits should be checked against machine speed and feed recommendations. How does the annular design affect chip removal? The annular cutter removes a ring of material rather than the full core, reducing chip volume and cutting forces; this improves chip evacuation and decreases the load on the drilling machine. Is the Weldon shank standard size indicated in the SKU? The SKU 8000380300NW corresponds to the NOVA 25 with a Weldon shank 19.05 mm and the specified dimensions and features as listed above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
34mm Core Drill HSS 30mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
Benefit from the combination of HSS strength, a 34 mm cutting diameter and 30 mm cutting depth to achieve fast, precise holemaking in steel and non‑ferrous metals; order the tool directly via Metav Werkzeuge or request advice from our specialists. RUKO Core Drill Ø34 mm HSS – 30 mm Cutting Depth, Weldon Shank The RUKO Core Drill Ø34 mm HSS is an industrial annular cutter designed for efficient holemaking in structural steel, cast components and light metals with a Weldon shank for secure mounting. High-performance HSS construction 34 mm cutting diameter 30 mm effective cutting depth Weldon shank 19.05 mm (3/4") Precision holemaking for robust materials Built from HSS, this annular cutter delivers a balance of toughness and edge retention that suits demanding workshop environments. The 34 mm diameter combined with a 30 mm cutting depth enables one‑pass holemaking for many common structural applications, reducing the need for extended reaming or follow‑up machining. The tool’s geometry with eight cutting edges produces smooth, concentric holes and reduces heat buildup; this is particularly helpful when working with thicker T‑sections or large sheets, where precision and repeatability are required. Secure mounting and machine compatibility The cutter is supplied with a Weldon shank 19.05 mm (3/4"), a widely accepted interface for magnetic drills and compatible machine arbors. The solid shank dimension and short overall form ensure reliable clamping and minimal run‑out during operation, which contributes to consistent hole quality. With a total length of 63 mm, the tool offers a compact footprint that is well suited to confined setups while maintaining the necessary reach for the specified cutting depth. Efficient cutting performance and chip control The annular design removes a ring of material rather than drilling the entire core, which reduces power draw and preserves machine life. The cutter’s form promotes effective chip evacuation, shortening cycle times and helping to maintain cutting efficiency. The inherent properties of HSS support repeated machining of mixed materials without premature wear, delivering long service life under standard workshop conditions when used with appropriate feeds and speeds. Typical applications and workshop advantages This cutter is intended for industrial use on steel, cast iron and non‑ferrous metals, making it suitable for structural fabrication, maintenance work and light engineering tasks. The combination of a robust material, a precise cutting diameter and a secure Weldon interface reduces setup iterations and increases throughput across repetitive holemaking jobs. For workshops aiming to centralise suppliers and ensure reliable deliveries, this tool is a practical choice within a broader precision‑tool portfolio. For robust holemaking with the RUKO core drill, contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich Technical data Article number: 4000602313NW Name: RUKO core drill Ø34 mm HSS, 30 mm cutting depth, Weldon Facts Diameter: 34 mm Cutting depth: 30 mm Total length: 63 mm Cutting edges: 8 Shank diameter: 19.05 mm (3/4") Special features Material: HSS Suitable for steel Suitable for cast iron Suitable for non‑ferrous and light metals Shank type: Weldon FAQ What materials can this cutter process? The RUKO core drill is suitable for steel, cast iron and non‑ferrous metals, as specified for workshop and fabrication tasks. Is the shank compatible with magnetic drilling stands? Yes, the cutter uses a Weldon shank 19.05 mm (3/4"), which fits standard magnetic drill arbors that accept Weldon‑type mounting. How deep can this cutter cut in a single pass? The tool offers a 30 mm cutting depth, enabling single‑pass holemaking for many structural and plate applications. How many cutting edges does the tool have and what is the benefit? The cutter has eight cutting edges, providing smooth cutting action, improved chip formation and consistent hole quality. What is the total length and why does it matter? The total length is 63 mm, which ensures a compact profile for constrained set‑ups while allowing the specified cutting depth. Ruko GmbH: Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
34mm Core Drill Ultra 35 HM-Tipped 35mm Cut Depth Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of the combination of long tool life, precise 35 mm cutting depth and a Quick IN 18 mm shank for efficient, reproducible core drilling; order the Ultra 35 Core Drill directly via Metav Werkzeuge or ask our consultants if needed. Ultra 35 Core Drill – carbide-tipped core drill with Quick IN 18 mm shank (FEIN) The Ultra 35 Core Drill is a carbide-tipped core drill designed for precise 35 mm deep core holes in industrial and workshop settings, featuring a Quick IN 18 mm shank for fast, secure tool changes. Carbide-tipped for long tool life Quick IN 18 mm shank for secure fit 35 mm cutting depth for precise cores 34 mm diameter for standard core holes Consistent core results that boost productivity The Ultra 35 delivers consistent hole quality through a controlled cutting depth of 35 mm and a nominal diameter of 34 mm, reducing rework and downtime. The geometry with multiple cutting edges provides steady chip evacuation and reduces vibration, which supports faster cycle times in repetitive operations. For production environments where repeatability matters, the combination of precise depth control and sturdy drill geometry translates into measurable efficiency gains. Durable construction for extended service life Equipped with carbide-tipped cutting edges and a robust geometry, this core cutter prioritises wear resistance and longevity. The presence of six cutting edges distributes cutting forces and lowers edge wear, which keeps performance stable over many holes. For workshops that demand minimal tool change frequency, the tool's construction reduces the frequency of replacements and contributes to lower life-cycle costs. Quick-change shank for straightforward tool handling The Quick IN 18 mm shank enables rapid insertion and removal in compatible quick-change holders, cutting setup times and simplifying tool swaps between operations. The Quick IN system provides secure clamping and repeatable concentricity, which helps maintain hole accuracy even under intermittent machine loading. For users new to quick-change interfaces: Quick IN refers to a standardised shank geometry designed for immediate engagement with corresponding chucks or adaptors. Designed for industrial core-drilling tasks With a total length of 77 mm and metric dimensions throughout, this core drill is tailored to industrial workflows where defined core depth and robust handling are required. The tool's specification supports use in common production jigs and standard quick-change systems, ensuring compatibility with existing setups. For specifiers seeking a reliable, production-oriented core drill, the Ultra 35 combines practical dimensions with proven cutting performance. For FEIN-quality core drilling and reliable delivery from our European warehouse, request a supply recommendation from Metav Werkzeuge or consult our technical advisers by e‑mail or phone. Technical data Article number: 4149702034NW Product type: Ultra 35 Product: Core drill Facts Diameter: 34 mm Cutting depth: 35 mm Total length: 77 mm Cutting edges: 6 Shank: Quick IN 18 mm Special features Carbide-tipped Highest tool life and excellent cutting performance Metric dimensions Shank design: Quick IN FAQ What cutting depth does the Ultra 35 Core Drill provide? The core drill offers a 35 mm cutting depth, designed for consistent core extraction to that exact depth. Which shank is fitted to the tool? The tool features a Quick IN 18 mm shank, compatible with Quick IN holders and quick-change systems. Is the cutting part carbide-equipped? Yes, the Ultra 35 is carbide-tipped, providing enhanced wear resistance and extended service life. What hole diameter does this core drill produce? The drill produces a nominal hole of 34 mm diameter. How many cutting edges are arranged on the cutter? The design includes six cutting edges, which support smooth cutting and reliable chip control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill 24mm Carbide Tipped Quick IN Shank 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide‑tipped cutting edges, the Quick IN 18 mm shank and a 35 mm effective cutting depth for fast, consistent holemaking and reduced tool changes. Order the Ultra 35 core drill directly via Metav Werkzeuge or consult our specialists for application advice. Ultra 35 Core Drill 24 mm — Carbide‑tipped, Quick IN 18 mm (Fein) The Ultra 35 core drill is a carbide‑tipped drilling tool engineered for efficient, repeatable holemaking in industrial and workshop settings, featuring a Quick IN shank for rapid tool changes Carbide‑tipped for extended life Quick IN shank 18 mm for fast changes 35 mm cutting depth for through‑hole work Metric dimensions and robust performance Robust cutting performance for high throughput This core drill combines a carbide‑tipped design with six cutting edges to deliver reliable material removal and long tool life under continuous use. The use of carbide inserts gives a higher wear resistance than high‑speed steels, which translates into fewer tool changes and lower process disruption. The result is consistent hole quality and improved machine uptime, making the tool suited to production environments where productivity and repeatability are priorities. Fast machine integration and simplified handling Equipped with a Quick IN 18 mm shank, the drill can be mounted and released swiftly in compatible holders and quick‑change systems, reducing non‑productive time during tool swaps. The nominal Ø24 mm diameter and a total length of 77 mm provide a compact, well‑balanced geometry that helps maintain concentricity in handheld and machine applications alike. The shank standard ensures broad compatibility with modern tool changers without additional adapters. Precise hole depth and reduced rework With a defined cutting depth of 35 mm, this core drill is optimised for producing clean, controlled bores in a single pass where the specified depth is required. The depth control reduces the need for multiple operations and minimises rework, which benefits workflow efficiency and downstream assembly processes. The drill’s design supports stable cutting behaviour, contributing to dimensional accuracy and surface quality of the bore. Designed for dependable workshop use The tool’s construction—described as HM‑bestückt in the original specification—indicates a carbide‑tipped configuration that balances toughness and wear resistance. This makes it a practical choice for routine production tasks in metalworking workshops and industrial maintenance departments. Regular inspection of the tip condition and correct mounting via the Quick IN system will preserve the tool’s performance and extend service intervals. Practical handling and service considerations Maintenance is straightforward: secure seating of the Quick IN shank and routine monitoring of the cutting edges help to maintain cutting performance and hole quality. The combination of tip material and shank design reduces downtime and supports a simplified tooling strategy for operations that demand both speed and repeatability. The tool’s compact profile also facilitates access in confined setups where longer tools would be disadvantageous. Contact Metav Werkzeuge today to discuss FEIN compatibility, order the Ultra 35 core drill via our Emmerich team or request tailored application advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 4149702024NW SKU: 4149702024NW Type: Ultra 35 Product type: Core drill Manufacturer: C. & E. Fein GmbH Facts Diameter: 24 mm Cutting depth: 35 mm Total length: 77 mm Number of cutting edges: 6 Shank: Quick IN 18 mm Special features Material: Carbide‑tipped Shank design: Quick IN Metric dimensions Highest tool life and outstanding cutting performance FAQ What is the specified cutting depth of this core drill? The core drill offers a cutting depth of 35 mm, as stated in the product specification for the Ultra 35 core drill. Which shank standard does the tool use for machine compatibility? The tool is supplied with a Quick IN shank of 18 mm, designed for rapid mounting and removal in compatible quick‑change systems. Is the cutting tip carbide or high‑speed steel? The drill is carbide‑tipped (HM‑bestückt), providing enhanced wear resistance compared with conventional high‑speed steel tips. How many cutting edges does the cutter have? This design features six cutting edges, which contributes to efficient material removal and stable cutting. What is the SKU for ordering and identification? The SKU for this item is 4149702024NW; it identifies the Ultra 35 core drill variant listed here. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill 59mm Diameter HM-Tipped Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Data inconsistency: the manufacturer "C. & E. Fein GmbH" is not included in the provided manufacturer overview; please supply a valid manufacturer from the list so a compliant product description can be generated. This issue arises when the specified manufacturer is not recognised within the predefined database or list of approved manufacturers, which is essential for ensuring accuracy and compliance in product descriptions. To resolve this, it is necessary to cross-check the manufacturer details against the authorised list and provide a valid entry. Without this correction, it is not possible to proceed with generating a product description that adheres to the required standards and guidelines.
35mm Core Drill Bit 14mm Solid Carbide, Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped cutting edges, a Quick IN 18 mm shank and a 35 mm effective cutting depth for efficient production runs and reduced tool changes; order via Metav Werkzeuge or consult their technical team for application support Core drill Ultra 35 D14 mm Quick IN — Carbide-tipped core drill with Quick IN 18 mm shank by C. & E. Fein GmbH A bold core drill solution: the Core drill Ultra 35 D14 mm Quick IN offers a compact design for reliable 35 mm depth core drilling and fast tool changes in metric tool systems *Carbide-tipped for high wear resistance *Quick IN 18 mm shank for fast tool change *35 mm cutting depth for through-hole work *Four cutting edges for smooth cutting performance Longer runtimes through carbide tooling The carbide-tipped construction ensures high wear resistance and extended service life compared with standard high-speed steel cutters. By using a tipped design, heat and abrasive wear are reduced at the cutting interface, which translates into fewer tool replacements and less machine downtime. For production environments that require consistent hole quality over multiple cycles, this geometry delivers a stable process and improved cost-efficiency per hole. Rapid changeover with secure Quick IN connection Equipped with a Quick IN 18 mm shank, the tool enables swift, repeatable clamping in compatible holders. The Quick IN system shortens setup times and reduces the risk of misalignment during tool swaps, improving overall throughput. The secure shank interface also supports concentricity under load, helping to maintain hole accuracy when mounted in standard metric tool holders or quick-change adapters. Precise 35 mm core drilling in a compact format With a 14 mm diameter and 35 mm cutting depth, the cutter is designed for defined core-hole applications where depth control and clean extraction of the core are required. The tool’s metric dimensions simplify integration into conventional machining setups. The combination of controlled cutting depth and stable geometry assists in producing consistent hole edges and predictable machining results for repetitive tasks. Smooth cuts from multi-edge geometry The cutter uses four cutting edges, a design that balances chip removal and surface finish. Multiple edges distribute cutting forces, which reduces vibration and produces a neater bore with less burr formation. This geometry supports efficient chip evacuation during core drilling and contributes to steady feed performance, making the tool suitable for workshop and light industrial use where repeatable quality is required. For workshop reliability and quick technical advice, request the Fein Ultra 35 core drill through Metav Werkzeuge or contact the Metav technical team for tailored recommendations Technical data Article number: 4149702014NW Manufacturer: C. & E. Fein GmbH Product name: Core drill Ultra 35 D14 mm Quick IN Dimensions & cutting data Diameter: 14 mm Cutting depth: 35 mm Total length: 77 mm Number of cutting edges: 4 Shank: Quick IN 18 mm Materials & special features Carbide-tipped (HM-bestückt) Quick IN shank execution Metric dimensions Highest service life and excellent machining performance FAQ What shank type does the core drill use? The Core drill Ultra 35 is supplied with a Quick IN 18 mm shank, allowing fast, secure mounting in compatible quick-change holders. What is the available cutting depth and diameter? The tool provides a 35 mm cutting depth with a 14 mm diameter, designed for defined core-hole applications. Is the cutter carbide-tipped? Yes, the Ultra 35 is HM-bestückt, meaning it is carbide-tipped for improved wear resistance and longer life compared with non-tipped variants. How many cutting edges does this core drill have and what is the benefit? The cutter features four cutting edges, which distribute cutting forces, reduce vibration and help achieve a cleaner bore finish. Can the Ultra 35 be used in quick-change systems on production machines? The Quick IN 18 mm shank of the Ultra 35 is intended for use with compatible quick-change systems and holders suitable for metric shanks Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill HSS 25mm Cutting Depth Weldon Shank 19.05mm - C. & E. Fein GmbH
Take advantage of a robust combination of HSS construction, a secure Weldon shank and a compact geometry for efficient, repeatable hole production; order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. NOVA 25 core drill (annular cutter) by C. & E. Fein GmbH — 35 mm diameter, 25 mm cutting depth A NOVA 25 core drill engineered for rapid, clean hole-making in metalworking applications; the annular cutter design concentrates material removal in the periphery for faster feed rates and reduced power demand. HSS construction for extended tool life Weldon shank 19.05 mm (3/4") 35 mm diameter, 25 mm cutting depth 8 cutting edges for stable cutting Faster, more economical holemaking thanks to focused cutting geometry The annular cutter is made from HSS, offering a balance of hardness and toughness that supports consistent performance under repeated use. With a 35 mm diameter and a 25 mm effective cutting depth, the geometry reduces material removal compared with full-bore drills, which in practice lowers energy consumption and shortens cycle times. The 8 cutting edges distribute cutting forces evenly, leading to reduced vibration and a more predictable finish. This technical setup translates into measurable productivity gains for busy workshops and production lines. Secure clamping and repeatable positioning with a Weldon shank The tool features a Weldon shank, specified at 19.05 mm (3/4"), designed for positive clamping in magnetic drill chucks and compatible holders. This shank style aids accurate axial alignment and prevents slippage under high torque, which is particularly valuable when performing consecutive holes or long production runs. The combination of a compact overall length and the robust shank reduces set-up time and ensures repeatable results from one operation to the next, supporting a smoother workflow on the shop floor. Hard-wearing construction for demanding production environments Manufactured in HSS, the cutter delivers a high degree of wear resistance and thermal stability during intermittent drilling tasks. The overall length of 61 mm keeps the tool compact, aiding access in confined setups while the specified cutting depth of 25 mm defines a clear working envelope for safe, controlled use. These characteristics make the annular cutter a practical choice where reliability and minimal rework are priorities, helping to protect downstream processes from delays caused by poor hole quality. Practical support for workshop integration and procurement decisions As part of a considered tooling strategy, the core drill pairs technical reliability with easy inventory management: a single-piece packaging unit simplifies ordering and stock control. Metav’s established distribution and expertise support selection, ensuring the cutter can be matched to magnetic drills and holders commonly used across industry. The proven construction and consistent specifications provide a sound basis for purchasing decisions in production, maintenance and contract workshops. Contact Metav Werkzeuge for application details or to request tailored recommendations for the NOVA 25 core drill and compatible mounting options Technical data Article number: 8000380307NW Label: Kernbohrer NOVA 25 D.35mm HSS Schnitt-T.25mm Weldon FEIN Product type: Core drill (annular cutter) Facts Diameter: 35 mm Overall length: 61 mm Cutting depth: 25 mm Number of cutting edges: 8 Shank diameter: 19.05 mm (3/4") Material: HSS Special features Weldon shank 19.05 mm (3/4") High service life Shaft execution: Weldon FAQ What size of hole does the NOVA 25 core drill produce? The NOVA 25 core drill produces a 35 mm hole with a defined cutting depth of 25 mm, suitable for many standard metalworking tasks. Is the shank compatible with magnetic drill chucks? Yes, the Weldon shank at 19.05 mm (3/4") is intended for secure clamping in magnetic drill holders and Weldon-style chucks. How many cutting edges does the cutter have and what is the benefit? The cutter has 8 cutting edges, which helps balance cutting forces, reduce vibration and improve surface finish during holemaking. What material is the tool made from and what does that mean for durability? Constructed from HSS, the cutter offers a robust combination of hardness and toughness, supporting prolonged service life under standard drilling conditions. Can this annular cutter be used for repetitive production runs? Yes, the combination of HSS material, multiple cutting edges and a secure Weldon shank make the cutter suitable for repetitive production, where repeatability and tool life are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com