35mm Core Drill HSS 30mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
Robust HSS construction and a secure Weldon shank provide reliable torque transmission and clean 30 mm deep cores; ideal for repetitive metalworking tasks. Order the (Core drill 35 mm HSS) directly via (Metav Werkzeuge) or ask our consultants if needed. Core drill 35 mm HSS, 30 mm cut depth — RUKO (Weldon shank) Core drill 35 mm HSS for precision extraction of metal cores in steel and non-ferrous applications, supplied with a 19.05 mm Weldon shank for safe clamping in industrial holders HSS construction for demanding metalwork 35 mm diameter for standard core holes 30 mm cutting depth for shallow core drilling Weldon shank 19.05 mm (3/4") for secure clamping High-performance design for efficient core extraction The RUKO core drill combines high-speed steel construction with a robust geometry that is designed for repetitive cutting tasks. The HSS material provides a balanced combination of toughness and heat resistance, which reduces the risk of premature wear during intermittent heavy-duty use. With a 35 mm diameter and a 30 mm cutting depth, the tool is optimised for producing clean core holes in sheet work and structural components, helping to keep cycle times consistent and machine utilisation high. The compact overall length and firm flute geometry aid chip evacuation, resulting in more predictable machining results and reduced interruption for chip clearing. Broad material range and application advantages Designed for metalworking, the cutter is suitable for steel, cast iron and a range of non-ferrous metals and light alloys, including common applications such as T‑beams and large-format sheets. The tool’s specification indicates reliable performance in both mild and alloyed steels where core removal is required, and its material compatibility reduces the need to change tooling between similar operations. The number of cutting edges ensures stable engagement and even material removal, which supports a better surface finish in the remaining bore and lowers the frequency of rework. Secure mounting and workshop integration The Weldon shank (19.05 mm / 3/4") provides positive axial and rotational location in compatible holders, increasing resistance to slippage under torque and improving operational safety in power drilling setups. The shank form makes the tool straightforward to integrate into standard industrial chucks and arbor holders used across metal workshops. Packaged singly, the item suits both just-in-time replacement strategies and small-batch production environments, enabling a clear stock rotation approach and controlled tooling expenditure. Contact Metav Werkzeuge for availability and technical guidance on the RUKO core drill 35 mm HSS — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility with holders and workpiece materials and to arrange supply from Emmerich. Technical data Article number: 4000602314NW Label: Kernbohrer D.35mm HSS Schnitt-T.30mm Weldon RUKO Manufacturer: Ruko GmbH Facts Diameter: 35 mm Overall length: 63 mm Cutting depth: 30 mm Cutting edges: 9 Shank: Weldon 19.05 mm (3/4") Packaging unit: 1 Special features Material: HSS (high-speed steel) Suitable for steel (e.g. T‑beams, large-format sheets) Suitable for cast iron Suitable for non-ferrous and light metals Weldon shank for secure clamping FAQ What materials can this core drill machine effectively cut? The RUKO core drill (Core drill 35 mm HSS) is specified for use in steel, cast iron and a variety of non-ferrous and light metal applications, as indicated in the product data. Is the shank compatible with standard Weldon holders? Yes, the tool is supplied with a Weldon shank of 19.05 mm (3/4"), suitable for standard Weldon holders and arbors that accept that diameter. How deep can the drill cut in a single pass? The effective cutting depth specified for this core drill is 30 mm; operations should be planned accordingly to avoid exceeding the designed engagement. Are re‑sharpening options available for this HSS core drill? HSS geometry typically permits re‑grinding where the cutting edges permit it; the RUKO design supports maintenance via specialist re‑grinding services to extend tool life. What is the article number or SKU for ordering? Order reference: 4000602314NW (listed as the article number for procurement and inventory systems). Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
35mm Core Drill HSS 55mm Cutting Depth Weldon Shank 19.05mm - Ruko GmbH
Take advantage of high-performance cutting in HSS, precise Ø35 mm bore capacity and a secure Weldon 19.05 mm (3/4") shank for reliable workshop results — order via Metav Werkzeuge or consult the Metav team for application advice. RUKO Annular Cutter Ø35 mm HSS — 55 mm cutting depth, Weldon shank The RUKO Annular Cutter Ø35 mm HSS is a high-performance core drill designed for producing accurate, burr‑reduced holes in steel and non‑ferrous metals in industrial and workshop environments. HSS high-performance cutting material 55 mm cutting depth Weldon shank 19.05 mm (3/4") Suitable for steel, cast iron and non-ferrous metals Faster, cleaner holemaking for heavy‑duty metalwork Manufactured from HSS, this annular cutter combines material toughness with a geometry optimised for chip evacuation, enabling shorter cycle times and fewer re‑works. The Ø35 mm diameter paired with a 55 mm cutting depth produces a clean, precise bore while removing only the material core rather than the entire hole volume, which lowers power demands compared with solid twist drills. The nine cutting edges contribute to a steady cut and reduced surface finishing work, so production runs maintain consistent throughput and dimensional accuracy without excessive post‑processing. Secure clamping and consistent bore quality The Weldon shank design (19.05 mm / 3/4") ensures rigid seating in magnetic drill chucks and compatible toolholders, reducing runout and vibration during drilling. Stable clamping preserves the cutting geometry for longer tool life and enables consistently accurate hole placement when working on structural parts such as T‑beams or large plates. The overall length of 88 mm provides sufficient reach for most setups while keeping the tool mass low, supporting dependable performance in repetitive tasks and demanding fabrication environments. Versatile compatibility across workshop materials This core drill is specified for a broad range of metals: steel (including structural profiles and large sheets), cast iron, and various non‑ferrous metals such as aluminium and brass. The cutter’s construction and edge geometry make it suitable for both maintenance and production contexts, from fabricators to mechanical workshops. For less experienced users, annular cutters produce a pilot‑free bore method: the tool removes the material ring and leaves a solid slug that is ejected, which often yields faster holemaking than conventional twist drills for large diameters and minimises heat build‑up in the workpiece. For robust, accurate holemaking with the RUKO annular cutter, contact Metav Werkzeuge for tailored application advice or to place an order — Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000602466NW Product type: Annular cutter Material: HSS Diameter: 35 mm Cutting depth: 55 mm Overall length: 88 mm Shank: Weldon 19.05 mm (3/4") Number of cutting edges: 9 Manufacturer: Ruko GmbH Core measurements Ø: 35 mm Cutting depth: 55 mm Overall length: 88 mm Shank size: 19.05 mm (3/4") Materials & features Suitable for steel (including structural profiles) Suitable for cast iron Suitable for non‑ferrous and light metals Weldon shank for secure clamping High-speed steel construction for durability FAQ What hole size does this cutter produce? The cutter produces a bore of 35 mm diameter; the RUKO annular cutter Ø35 mm HSS (SKU 4000602466NW) is intended for precise Ø35 mm holes. What is the effective drilling depth? The tool offers a 55 mm cutting depth, with an overall length of 88 mm allowing sufficient reach for typical workshop applications. Which shank type is required for installation? A Weldon 19.05 mm (3/4") chuck or adapter is required to secure the cutter for reliable operation. Which materials can be machined with this cutter? This annular cutter is suitable for steel, cast iron and non‑ferrous metals such as aluminium and brass in fabrication and maintenance tasks. How does an annular cutter compare to a twist drill for large holes? Annular cutters remove only the material ring, producing cleaner holes with less power and shorter cycle times than equivalent twist drills for larger diameters; they also reduce burr formation and finishing work. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
35mm Core Drill NOVA 50 HSS 50mm Cutting Depth, Weldon Shank 19.05mm - C. & E. Fein GmbH
Take advantage of the HSS construction and the Weldon shank mounting to achieve reliable, repeatable 35 mm holemaking with a 50 mm cutting depth. Purchase the tool directly via Metav Werkzeuge or contact the consultants for application advice. NOVA 50 annular cutter – 35 mm, HSS with Weldon shank (FEIN) The NOVA 50 is an HSS annular cutter designed for precision metalworking and industrial holemaking, suitable for use in magnetic drills and compatible arbors for efficient 35 mm hole production. HSS construction for high wear resistance Weldon shank 19.05 mm (3/4") for secure clamping 50 mm cutting depth for efficient holemaking Designed for metric systems and metalworking Precision cutting for consistent hole quality The annular cutter is manufactured from HSS, which provides a balanced combination of toughness and edge retention for industrial use. With 8 cutting edges and a defined cutting depth of 50 mm, the tool removes material efficiently while keeping heat buildup manageable. This means fewer reworks and more predictable production cycles, especially in repetitive tasks such as structural fabrication or site-based drilling. The geometry and material choice are geared towards stable performance across common steels and general metalwork. Secure mounting and torque transfer with the Weldon shank Equipped with a Weldon shank 19.05 mm (3/4"), the cutter offers secure clamping and clearance for reliable torque transfer during heavy-duty operation. The shank format is a standard for many arbors and magnetic drilling units, reducing the need for additional adaptors and minimising runout. Secure clamping contributes directly to tool life and hole precision, translating into less downtime and fewer scrap parts in production environments. Designed for efficient workshop workflows A total length of 86 mm combined with the 35 mm bore diameter makes this cutter a compact solution for confined setups while still allowing a practical working reach. Metric dimensions throughout simplify tool selection and inventory management in facilities that standardise on metric tooling. The construction emphasises long service life, so maintenance intervals are extended and replacement frequency is reduced, supporting continuous operation on the shop floor. Practical benefits and suitable applications The tool is particularly appropriate for metal fabrication, maintenance teams and mechanical workshops that require fast, clean holes in ferrous materials. As an annular cutter it produces less swarf than twist drills when creating blind or through-holes of the specified diameter, which can speed up chip removal and post-process cleaning. The tool’s features support efficient cycle times and integration into established drilling workflows without complex adjustments. For application guidance or to secure reliable supply from our Emmerich warehouse, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — consultants can advise on compatibility and suitable arbors for this FEIN annular cutter (SKU 4149702673NW) Technical data Article number: 4149702673NW Type: NOVA 50 Product type: Annular cutter Brand: C. & E. Fein GmbH Dimensions & core data Diameter: 35 mm Cutting depth: 50 mm Total length: 86 mm Shank size: 19.05 mm (3/4") Cutting edges: 8 Materials & features Material: HSS Shank: Weldon shank 19.05 mm (3/4") Metric dimensions High service life Packaging unit: 1 FAQ What materials can be machined with this annular cutter? The annular cutter is made of HSS and is suitable for general metalworking tasks; it is primarily intended for use in common ferrous materials and structural steels. Which machines is the cutter compatible with? The Weldon shank 19.05 mm (3/4") enables compatibility with many magnetic drills and standard arbors that accept a 3/4" Weldon fitment, offering reliable clamping and torque transfer. Is the 50 mm cutting depth sufficient for through-holes? A 50 mm cutting depth allows efficient production of through-holes and blind holes within that depth; for deeper requirements, alternative cutters with greater reach should be considered. Can the cutter be resharpened? Yes, tools made from HSS can typically be resharpened by a qualified service; resharpening extends the useful life of the cutter while preserving bore quality. What does the SKU 4149702673NW refer to? SKU 4149702673NW identifies this specific NOVA 50 annular cutter configuration (35 mm diameter, 50 mm cutting depth, Weldon shank) for ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Solid Carbide 6‑Cut 50mm Cut Depth Quick IN Shank 18mm - Ruko GmbH
Benefit from a combination of solid carbide endurance, a 50 mm effective cutting depth and the time-saving Quick IN shank for uninterrupted production. Order the Core drill Ø35 mm solid carbide, 50 mm cutting depth (Quick IN) directly via Metav Werkzeuge or consult the advisors for application-specific recommendations. Core drill Ø35 mm solid carbide, 50 mm cutting depth (Quick IN) — Ruko Core drill Ø35 mm solid carbide, 50 mm cutting depth (Quick IN) is designed as a high-performance annular cutter for demanding drilling tasks in high-strength and alloyed steels. Solid carbide construction 50 mm cutting depth Quick IN 18 mm shank Six cutting edges for stable cutting High-performance cutting with long tool life The solid carbide construction delivers high hardness and wear resistance for sustained performance in abrasive or high-alloy materials. With six cutting edges, the tool provides a balanced cutting action that reduces vibration and supports steady material removal, which helps to maintain hole roundness and prolong the service interval of the cutter. This results in fewer tool changes during production runs and a generally more efficient machining process. Fast tool changes and secure clamping to reduce downtime The Quick IN shank, with an 18 mm diameter, enables rapid insertion into compatible holders and stable clamping during operation. This quick-change design shortens setup times and simplifies handling on machine stations that accept the Quick IN system. The combination of a robust shank and well-distributed cutting geometry supports consistent axial guidance, which is particularly valuable when working with long or heavy components that demand reliable tool retention. Tailored for tough applications in rail and alloyed steels Engineered for use on demanding substrates, this annular cutter is suitable for cutting into railway rails, Hardox and Weldox 400 abrasion-resistant steels, general structural steel and cast steel, as well as high-chrome and stainless steels such as V2A and V4A. The tool’s geometry and material selection target efficient metal removal in these hard-wearing materials while maintaining hole quality. For industrial workshops and production environments, the cutter offers a practical balance of durability and precision for repetitive through-holes. Contact Metav Werkzeuge for detailed application advice and fast delivery from our Emmerich centre: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000602643NW Label: Kernbohrer D.35mm Vollhartmetall Schnitt-T.50mm Quick IN RUKO Material: Solid carbide Manufacturer: Ruko GmbH Shank: Quick IN, 18 mm Packaging unit: 1 Facts Diameter: 35 mm Cutting depth: 50 mm Overall length: 112 mm Cutting edges: 6 Applications / Special features Suitable for railway rails Suitable for Hardox / Weldox 400 steels Suitable for steel and cast steel Suitable for high-chrome steels (V2A, V4A) and higher-alloy steels Quick IN shank system Solid carbide construction FAQ What materials is this annular cutter suitable for? The answer: The Core drill Ø35 mm solid carbide, 50 mm cutting depth (Quick IN) from Ruko is suitable for railway rails, Hardox and Weldox 400, general steel and cast steel, and high-chrome stainless steels such as V2A and V4A. What is the effective cutting depth of the tool? The answer: The cutter provides a cutting depth of 50 mm, enabling through-holes of that depth without multiple passes. Which shank system is used and what is its size? The answer: The tool features a Quick IN shank with an 18 mm diameter for quick insertion and secure clamping in compatible holders. How many cutting edges does the tool have and what is the benefit? The answer: The annular cutter has six cutting edges, which support stable cutting, reduced vibration and consistent hole quality during production work. What is the article number for ordering? The answer: The article number for this Ruko core drill is 4000602643NW and it is supplied as a single unit. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
35mm Core Drill Ultra 35 Carbide Tipped Quick IN Shank 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the HM‑tipped design and the 18 mm Quick IN shank for reliable, fast core drilling with extended tool life; order directly via Metav Werkzeuge or consult technical advisors for application-specific guidance. Ultra 35 Core Drill D 40 mm Quick IN — HM‑tipped, 35 mm cutting depth (C. & E. Fein) The Ultra 35 Core Drill D 40 mm Quick IN is a carbide‑tipped core drill crafted for robust metalworking tasks, combining high wear resistance with a compact 35 mm cutting depth and a Quick IN 18 mm shank for rapid changes HM‑tipped for highest wear resistance 35 mm cutting depth for standard core holes 18 mm Quick IN shank for fast tool changes Metric dimensions for consistent fits Maximise uptime with long‑life carbide tooling The HM‑tipped construction delivers a measurable improvement in durability compared with conventional HSS tooling, leading to fewer replacements and lower process interruptions. With six cutting edges, the geometry promotes consistent chip formation and stable cutting forces, which helps maintain hole quality over long series. This results in a tangible increase in productive hours per tool and more predictable planning on the shop floor. Faster tool changes and steady hole quality Equipped with an 18 mm Quick IN shank, the drill enables rapid mounting and removal in compatible holders, reducing non‑productive time during tool swaps. The 35 mm cutting depth combined with the 40 mm diameter provides a reliable solution for common core‑drilling tasks where repeatable hole dimensions are essential. The compact overall length of 77 mm improves access in confined set‑ups while preserving concentricity and finish. Practical handling aligned with industrial workflows Designed for metric systems and inline with professional workshop equipment, the tool supports straightforward integration into standard toolholders. The robust tip material reduces sensitivity to heat and abrasive wear, meaning consistent performance across batches. The single‑unit packaging ensures immediate availability for individual replacements or targeted replenishment without excess stock. A trustworthy partner for precision work Sourcing from a recognised manufacturer and offered via Metav Werkzeuge, this core drill pairs technical performance with the backing of a supplier that acts as a quality filter for the European market. The emphasis on reliable supply and experienced advice supports operational continuity and reduces procurement complexity for industry and trade customers. Contact Metav Werkzeuge to discuss the Ultra 35 core drill and specify the HM‑tipped Quick IN solution for the intended metalworking application; Metav’s consultants in Emmerich can advise on compatibility and delivery options Technical Data Article number: 4149702040NW Product type: Core drill Label: Kernbohrer Ultra 35 D.40mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Packaging unit: 1 Facts Diameter: 40 mm Total length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Shank: Quick IN, 18 mm Special features Material: HM‑tipped Shank execution: Quick IN Metric dimensions Highest stand time and excellent cutting performance FAQ What materials is the Ultra 35 core drill suitable for? The Ultra 35 core drill, with its HM‑tipped design, is intended for general metal core‑drilling applications where carbide tips offer superior wear resistance. How does the Quick IN shank benefit workshop workflow? The 18 mm Quick IN shank on the Ultra 35 core drill enables rapid tool changes, reducing downtime and supporting fast tool‑change systems. What hole size and depth does this tool produce? This core drill creates a 40 mm diameter hole with a cutting depth of 35 mm, suitable for standard core‑drilling requirements. How many cutting edges does the tool have and why does it matter? The tool has six cutting edges; this geometry improves chip control and contributes to stable cutting conditions and consistent hole quality. Is the Ultra 35 compatible with metric toolholders? Yes, the Ultra 35 core drill is made to metric dimensions and is intended for integration into compatible holders using the Quick IN shank system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM Tipped 35mm Cut Depth Quick IN Shank - C. & E. Fein GmbH
Take advantage of the combination of carbide‑tipped construction, a Quick IN 18 mm shank and a 35 mm cutting depth for reliable, high‑productivity holemaking; order the cutter via Metav Werkzeuge or consult the team for compatibility questions. Ultra 35 annular cutter D25 mm, HM‑tipped, Quick IN shank – FEIN A Ultra 35 annular cutter engineered for precision through‑holes in industrial operations, offering fast tool changes with its Quick IN 18 mm shank and extended tool life through carbide‑tipped cutting edges HM‑tipped for extended tool life Quick IN 18 mm shank for rapid tool change 35 mm cutting depth for standard through‑holes Six cutting edges for efficient material removal Accurate holes with minimal rework thanks to carbide tips The carbide‑tipped cutting edges deliver consistent edge retention and reduce the need for frequent regrinding, making the tool especially suitable where repeatability matters. With a 25 mm diameter and robust cutting geometry, the annular cutter produces clean bores while lowering burr formation. The presence of six cutting edges improves chip division and reduces cutting forces, which translates into shorter cycle times and less follow‑up finishing for production and maintenance work. Faster setup and less downtime through Quick IN compatibility Equipped with a Quick IN shank (18 mm), the cutter simplifies tool changes in compatible holders and reduces spindle downtime. The shank design supports rapid engagement and secure seating, meaning workshop throughput benefits from quicker changeovers and fewer interruptions. For operations that value machine uptime, this compatibility is a pragmatic efficiency gain that complements the cutter’s high‑performance design. Built for sustained performance in workshop environments The Ultra 35 family emphasises long service life and steady performance: materials and geometry combine to provide excellent cutting performance and reliable wear resistance. The tool’s overall length of 77 mm balances reach with rigidity, helping to maintain hole tolerances over repeated cycles. For production lines or on‑site maintenance where tool longevity reduces total production costs, this cutter offers a practical, dependable solution. Clear specifications and metric dimensions for straightforward planning With metric dimensions throughout and a maximum cutting depth of 35 mm, the annular cutter fits standard planning and fixture layouts without conversion. The concise specification set—25 mm diameter, 35 mm cut depth, six cutting edges, and Quick IN 18 mm shank—supports straightforward process planning and tool management. Technical teams will appreciate the transparency of these data points when integrating the cutter into drilling sequences or maintenance kits. Choose the FEIN Ultra 35 annular cutter for a balance of fast changeover and long tool life — contact Metav Werkzeuge for consultation and order placement via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 4149702025NW Product type: Annular cutter (core drill) Label: Kernbohrer Ultra 35 D.25mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Core specifications Diameter: 25 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Special features Carbide‑tipped (HM‑tipped) Quick IN shank 18 mm Metric dimensions High tool life and outstanding cutting performance FAQ What machine interfaces is this cutter compatible with? The Ultra 35 annular cutter is supplied with a Quick IN 18 mm shank, designed for holders and adapters that accept Quick IN tooling; compatibility depends on the machine’s toolholder specification. How deep can the cutter cut reliably? This annular cutter features a cutting depth of 35 mm, providing a clear limit for through‑hole planning and fixture setup when selecting the correct stroke and feed. Does the cutter require special coolant or feed settings? The carbide‑tipped geometry of the Ultra 35 benefits from appropriate feed and coolant strategies to sustain high tool life and chip evacuation; refer to machine and tool manufacturer guidance for optimal parameters. How does the number of cutting edges affect performance? With six cutting edges, the cutter reduces cutting forces per tooth, improves chip distribution and contributes to a cleaner bore, which helps to reduce rework and finishing steps. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM Tipped 6 Flutes 35mm Cut Depth Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of a durable, carbide‑tipped design and the fast, secure Quick IN 18 mm shank for reliable holemaking in production — the combination of long tool life and quick changeover keeps workflows efficient. Order the annular cutter directly via Metav Werkzeuge or ask our consultants if needed. Ultra 35 annular cutter — 29 mm diameter, 35 mm cutting depth (C. & E. Fein) The Ultra 35 annular cutter is a carbide‑tipped holemaking tool designed for fast, precise bore production with a Quick IN 18 mm shank for rapid tool changes in magnetic drills and similar equipment. Carbide‑tipped for highest wear resistance Quick IN 18 mm shank for rapid tool change 35 mm cutting depth for clean through and blind holes Six cutting edges for smooth surface finish Faster, cleaner holemaking with carbide cutting edges The primary advantage of an annular cutter over a conventional twist drill is material removal: instead of removing a full core, the tool mills a ring and leaves a solid slug. This makes holemaking more power‑efficient and often faster for larger diameters. With a carbide‑tipped construction and six cutting edges, the tool delivers high wear resistance and consistent results across repeated cycles. The 29 mm diameter and 35 mm cutting depth specify the hole size and the usable cutting length, enabling precise planning for both through and partial holes. This combination supports predictable cycle times and reduced rework in metalworking environments. Secure clamping and swift workflow integration The Quick IN 18 mm shank simplifies integration into existing magnetic drills and quick‑change adaptors, reducing downtime during tool swaps. A short 77 mm overall length contributes to rigidity when working in confined setups and helps maintain concentricity during cutting. The six‑edge geometry assists chip evacuation, lowering the risk of clogging and improving surface finish of the bore. These design choices translate into measurable production benefits: fewer tool changes per shift, reduced machine load, and more repeatable hole quality for batch work or on‑site maintenance tasks. Robust tool life and predictable operations Manufactured with a focus on endurance and cutting performance, this cutter offers a balance between initial investment and operational economy. The carbide tips provide edge retention at elevated cutting speeds, which supports longer service intervals and less frequent dressing or replacement. Metric sizing and standardised shank connection mean straightforward inventory management and compatibility with common tooling systems. For users requiring reliable, repeatable holemaking in industrial settings, the design emphasises uptime and consistent results rather than unproven novelty. For reliable, high‑performance holemaking with the C. & E. Fein Ultra 35 annular cutter, contact Metav Werkzeuge for personalised advice and purchase support — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 4149702029NW Product type: Annular cutter Brand: C. & E. Fein GmbH Core dimensions Diameter: 29 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Features / Material Carbide‑tipped Quick IN shank 18 mm Metric dimensions Packaging unit: 1 FAQ What material is the cutter tipped with? The Ultra 35 annular cutter is carbide‑tipped, offering high wear resistance and stable cutting performance in repetitive operations. What does the Quick IN 18 mm shank mean for workshop use? The Quick IN 18 mm shank ensures rapid, secure tool changes in compatible magnetic drills and quick‑change holders, simplifying workflow integration for the Ultra 35. What hole sizes and depths are covered by this cutter? This annular cutter produces a 29 mm diameter bore with a 35 mm cutting depth; overall tool length is 77 mm, enabling planning for through or partial holes. How many cutting edges does the tool have and what is the benefit? The tool has six cutting edges, which aid chip evacuation and contribute to a smoother bore surface and steadier cutting forces. Is the Ultra 35 suitable for series production? The design of the Ultra 35, with carbide tips and a quick‑change shank, supports longer tool life and quick replacement, making it well suited for repetitive or series holemaking. Manufacturer: C. & E. Fein GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM Tipped 6-Cut Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Benefit from the combination of carbide‑tipped construction and the Quick IN 18 mm shank for rapid tool changes and extended service life; the 41 mm diameter with a 35 mm cutting depth delivers reliable, repeatable core holes in metric dimensions. Order the item directly via Metav Werkzeuge or contact the consultants for compatibility advice and supply options. Ultra 35 core drill (41 mm, carbide‑tipped, Quick IN shank) – FEIN A Ultra 35 core drill engineered for efficient, high‑standtime core hole production in metalworking and construction tasks HM‑tipped design for highest tool life Quick IN 18 mm shank for fast tool changes 35 mm cutting depth for standard core holes Metric dimensions and consistent performance Faster holemaking with carbide tip technology The carbide‑tipped cutting edges offer a clear productivity advantage: high wear resistance and consistent cutting geometry extend the interval between tool changes, which reduces downtime and labour costs. With six cutting edges, the drill maintains controlled chip formation and smoother drilling progress, translating into more holes per shift and a measurable increase in process efficiency. The construction is particularly suited to repetitive core drilling where both precision and throughput matter. Reduced set‑up time through Quick IN compatibility Equipped with a Quick IN 18 mm shank, the tool allows rapid insertion and removal from compatible chucks and adaptors, significantly shortening changeover times on portable drills and drill stands. This quick‑change interface supports a leaner workflow in busy workshops and on site, enabling technicians to switch to different diameters without lengthy re‑clamping. The result is a tangible saving in operational time and a more flexible production rhythm. Practical dimensions and robust application range A 41 mm cutting diameter combined with a 35 mm cutting depth and an overall length of 77 mm provides a balanced geometry for common core hole requirements. The metric sizing simplifies process planning and replacement ordering. The tool is carbide‑tipped for performance on a spectrum of materials typically encountered in workshop and construction environments, offering a reliable solution when standard core holes are required quickly and repeatedly. For tailored advice on integrating FEIN core drills into existing tool fleets or for procurement support, contact Metav Werkzeuge – phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for expert assistance and fast delivery options Technical data Article number: 4149702041NW Type: Ultra 35 Product: Core drill (Kernbohrer) Brand: C. & E. Fein GmbH Facts Diameter: 41 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Special features and design Carbide‑tipped (HM‑tipped) Quick IN shank 18 mm Metric dimensions High service life and excellent cutting performance FAQ What materials can this core drill process? The Ultra 35 core drill from FEIN is carbide‑tipped and suited for a range of common workshop materials; suitability depends on the exact workpiece and cutting parameters. Is the Quick IN shank compatible with standard FEIN chucks? Yes, the 18 mm Quick IN shank is designed for quick‑change systems compatible with FEIN Quick IN adaptors and comparable quick‑change tool holders. What is the effective cutting depth of this core drill? The tool provides a cutting depth of 35 mm; the overall length is 77 mm, SKU 4149702041NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM Tipped 9 Flutes Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped construction, a Quick IN 18 mm shank and a 35 mm cutting depth for reliable, repeatable core drilling with reduced downtime; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Ultra 35 Core Drill Ø54 mm — carbide-tipped, Quick IN shank (Fein) A Ultra 35 core drill designed for precision metalworking, offering a 54 mm diameter and a Quick IN 18 mm shank for fast, secure tool changes Carbide-tipped for high wear resistance Quick IN 18 mm shank for secure fitting 35 mm cutting depth for controlled hole depth Faster, more consistent holemaking for production work The carbide-tipped design ensures high wear resistance and stable cutting performance across repetitive operations. With a 54 mm diameter and a nominal 35 mm cutting depth, this tool delivers consistent hole profiles in metric dimensions, reducing rework and secondary finishing. The nine cutting edges distribute cutting forces evenly, which helps maintain roundness and minimise vibration. In practical terms, this translates into shorter cycle times and fewer interruptions for regrinding or replacement, supporting higher throughput on production lines. Secure clamping and quick changeover for workshop efficiency The Quick IN 18 mm shank provides a compact, standardised interface for rapid insertion and removal in compatible holders and magnetic drills. This feature reduces non-cutting time during tool changes and improves workflow continuity on busy job sites. The overall length of 77 mm and the compact shank profile make the tool suitable for constrained working spaces while preserving cutting stability. For workshops aiming to streamline operations, the tool’s fast-change capability supports a measurable increase in daily productivity. Durable construction and clear benefits for maintenance planning Equipped with hard-metal tips (HM), the cutter offers longevity under industrial loads. The carbide-tipped cutter geometry is designed to keep edge retention high even under intermittent drilling conditions, making maintenance intervals predictable and easier to plan. Fewer tool changes reduce inventory turnover and free up skilled personnel for value-adding tasks. Where abrasive or mixed materials are encountered, the robust tip material helps to avoid premature wear and supports dependable performance over many cycles. Targeted applications and who gains most from this core drill The core drill suits professional trades and industrial users working with metals in fabrication, installation and maintenance contexts. Typical use cases include through-hole creation for pipework, conduit entries and fixture installations where a clean, precise 54 mm bore is required to a depth of 35 mm. The combination of 9 cutting edges, carbide tips and the Quick IN interface makes the tool particularly appropriate for workshops that demand repeatable results and low process variability. For reliable core drilling with a Quick IN shank and long-lasting carbide tips, consult Metav Werkzeuge in Emmerich for ordering or technical matching to your machine — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical data Article number: 4149702054NW Type: Ultra 35 Label: Kernbohrer Ultra 35 D.54mm Quick IN FEIN Product type: Core drill Manufacturer: C. & E. Fein GmbH Facts Diameter: 54 mm Overall length: 77 mm Cutting depth: 35 mm Cutting edges: 9 Shank: Quick IN 18 mm Packaging unit: 1 Special features Carbide-tipped (HM-bestückt) Quick IN shank 18 mm Highest service life and excellent cutting performance Metric dimensions FAQ What materials is this core drill suitable for? The Ultra 35 core drill with carbide tips is designed primarily for metalworking applications; its construction supports robust cutting performance in typical workshop steels and similar materials. What is the exact cutting depth of the tool? This core drill provides a cutting depth of 35 mm, with an overall length of 77 mm and a 54 mm bore diameter for controlled, repeatable holes. How does the Quick IN shank benefit workshop workflows? The Quick IN 18 mm shank allows secure, fast changes between holders and magnetic bases, reducing non-cutting time and supporting higher productivity when using the Ultra 35. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped 35mm Cut Depth, Quick IN Shank 18mm - C. & E. Fein GmbH
Benefit from a combination of carbide-tipped durability, a Quick IN 18 mm shank for rapid tool changes, and a controlled 35 mm cutting depth for consistent hole quality — order directly via Metav Werkzeuge or consult our specialists for integration advice. Ultra 35 core drill (D.38 mm) by FEIN — carbide-tipped, Quick IN 18 mm shank The Ultra 35 is a carbide-tipped core drill engineered for efficient annular cutting in industrial metalworking applications, offering a 38 mm hole diameter with a Quick IN 18 mm shank for rapid exchange and stable clamping. Carbide-tipped for extended tool life Quick IN 18 mm shank for fast changeover 35 mm cutting depth for controlled bore quality Six cutting edges for efficient material removal Precision cutting that reduces cycle time The carbide-tipped design delivers highest service life and outstanding machining performance, translating into fewer tool changes and more productive machine hours. As an annular cutter, this tool removes a narrow ring of material rather than the whole core, which reduces required cutting force and often shortens cycle time compared with a conventional twist drill. The combination of six cutting edges and optimised geometry supports a steady chip flow and consistent bore finish, making the tool a reliable choice where repeatable hole quality is required. Rapid tool changes and straightforward handling Equipped with a Quick IN 18 mm shank, the cutter ensures fast, repeatable mounting in compatible quick-change holders. The relatively compact dimensions — 38 mm diameter, 35 mm cutting depth, and 77 mm overall length — make the cutter straightforward to handle and integrate into production lines or workshop setups with space constraints. Supplied individually (packaging unit: 1), the tool is ready for immediate use in systems that accept Quick IN shanks and prioritise fast set-up times and low fixturing effort. Durability that supports continuous production The construction emphasises long operating intervals and stable performance under repeated cycles. The combination of carbide tips and robust annular geometry minimises wear on the cutting edges and helps to maintain bore accuracy over many holes. This durability reduces process interruptions and contributes to consistent output quality. When paired with the logistical reliability offered by a specialist distributor, the tool supports lean workflows and dependable replenishment in professional workshops and small industrial operations. Choose the FEIN Ultra 35 for durable, fast annular drilling and contact Metav Werkzeuge in Emmerich for procurement and delivery coordination: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4149702038NW Product: Kernbohrer Ultra 35 D.38mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Packaging unit: 1 Facts Diameter: 38 mm Cutting depth: 35 mm Overall length: 77 mm Shank: 18 mm Quick IN Cutting edges: 6 Special features Carbide-tipped Metric dimensions Highest service life and outstanding machining performance Quick IN shank design FAQ What is the effective cutting depth of this core drill? The cutting depth is 35 mm for the Ultra 35 core drill by FEIN (SKU 4149702038NW), offering controlled bore depth for consistent hole quality. Which shank system does the tool use? The tool uses a Quick IN shank with an 18 mm diameter to enable rapid exchange and secure clamping in compatible holders. How does a core drill differ from a twist drill? A core drill (annular cutter) removes a ring of material and leaves a core, reducing required cutting force and often achieving faster cycles and cleaner bores than a conventional twist drill. How many cutting edges does the cutter have and what is the benefit? The Ultra 35 features six cutting edges, which promotes efficient material removal and a steady chip flow for improved surface finish and tool life. What is included in the delivery? The product is supplied individually (packaging unit: 1) as the Ultra 35 core drill, article number 4149702038NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped 6 Cutting Edges 35mm Cut Depth Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of the carbide-tipped construction and the Quick IN 18 mm shank for fast tool changes and extended service life; the 35 mm cutting depth and six cutting edges deliver efficient, clean bores with minimal rework. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Ultra 35 annular cutter D31 mm — carbide-tipped, Quick IN 18 mm shank (Fein) The Ultra 35 annular cutter is a precision core drill designed for efficient holemaking in metal fabrication and maintenance applications, offering fast material removal and consistent bore quality with a 35 mm cutting depth. Carbide-tipped for long life Quick IN 18 mm shank 35 mm cutting depth Six cutting edges for rapid cutting Faster, cleaner holes with less material removal The design of this annular cutter focuses on productivity: with a 31 mm diameter and a 35 mm cutting depth, the tool removes only the material of the hole rim rather than drilling the whole volume, which reduces cycle time and machine load. The six cutting edges promote smoother cutting and improved chip formation, resulting in clean, accurate bores that minimise subsequent finishing. For workshop environments where throughput matters, this translates into tangible time savings and fewer scrap parts. Quick tool changes and secure mounting reduce downtime Equipped with a Quick IN 18 mm shank, the cutter allows rapid, secure insertion into compatible magnetic drills and holders. The standardised shank format supports fast swapping between operations, significantly cutting machine idle time. Metric dimensions and a consistent shank interface simplify tool inventory management in mixed fleets, supporting a steady production flow and predictable setup procedures. Robust construction for extended service life The cutter is carbide-tipped, combining a tough body with hard, wear-resistant cutting edges to withstand continuous use. This results in high tool life and steady performance in repetitive tasks. The core design and edge geometry also aid chip evacuation, lowering the risk of clogging and heat build-up; the outcome is prolonged cutting quality and reduced need for frequent regrinding or replacement. Practical applications and workshop benefits This annular cutter suits metalworkers, fabricators and maintenance technicians who require repeatable, high-quality holes with minimal burr. Its configuration is particularly effective for through-holes in structural components and assemblies where precise bores and fast production matter. The combination of durable tip material and a quick-change shank supports predictable planning of tool life and replacement intervals, which helps with cost control and scheduling. For reliable high-performance holemaking, request the Ultra 35 annular cutter from Metav Werkzeuge; our team in Emmerich provides product guidance and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4149702031NW Type: Ultra 35 Product: Annular cutter (core drill) Facts Diameter: 31 mm Cutting depth: 35 mm Overall length: 77 mm Shank: Quick IN 18 mm Cutting edges: 6 Packaging unit: 1 Special features Carbide-tipped Quick IN shank 18 mm Highest tool life and excellent machining performance Metric dimensions FAQ What materials is this cutter intended for? The Ultra 35 annular cutter is designed for general metalworking applications; its carbide-tipped construction provides wear resistance suited to a wide range of common workshop metals. How does the Quick IN shank improve workflow? The Quick IN 18 mm shank enables rapid, repeatable tool changes in compatible magnetic drills, reducing setup time and increasing machine availability for continuous production. How deep can the cutter cut in a single pass? The cutter offers a cutting depth of 35 mm, which is the maximum effective depth per pass for this tool design. Manufacturer: C. & E. Fein GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped 6-Flute Quick IN 18mm Shank 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped durability, a Quick IN 18 mm shank for rapid changeovers and a 35 mm cutting depth for standard core work; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Ultra 35 Core Drill D42 mm with Quick IN 18 mm shank (Fein) The Ultra 35 Core Drill is a carbide-tipped core drill designed for robust, repeatable core drilling where fast tool changes and extended service life are required. Carbide-tipped for extended tool life Quick IN 18 mm shank for rapid changeover 35 mm cutting depth for efficient core removal 6 cutting edges for stable, clean cutting Consistent performance through carbide-tipped construction The core of reliable production is stability: the carbide-tipped design provides high wear resistance and maintains a cutting edge under repetitive use. Carbide tips resist abrasion far longer than standard HSS edges, which reduces the frequency of replacements and contributes to a predictable production rhythm. With high tool life as a focus, maintenance intervals are extended and process costs can be lowered through fewer tool changes and less machine downtime. Rapid clamping and reduced downtime with Quick IN A Quick IN 18 mm shank ensures fast, secure mounting in compatible quick-change systems. The standardised shank size simplifies tool handling on multi-tool setups and shortens changeover times, improving uptime in busy workshops. The quick-fit connection also reduces the risk of misalignment, so concentricity and run-out remain consistent — a clear advantage for serial operations and when using powerheads that demand precise coupling. Efficient cutting geometry for clean cores The tool’s 6 cutting edges and a 35 mm cutting depth are configured to deliver efficient chip formation and evacuation during the cut. A 42 mm diameter creates a substantial core while the overall length of 77 mm provides the reach needed for typical applications. The multiple cutting lips distribute cutting forces evenly, which reduces vibration and helps to produce cleaner hole walls and more uniform cores, benefiting subsequent finishing or measurement operations. Built for workshops seeking predictable productivity Metric dimensions and a focus on durability make this core drill suitable for workshop and light industrial environments where repeatability matters. The Ultra 35 family emphasises consistent cutting performance and ease of integration into existing quick-change systems. For teams seeking to streamline tool inventories while keeping measurement and manufacturing tolerances stable, this tool presents a pragmatic balance of performance and handling convenience. Choose the Fein Ultra 35 Core Drill with Quick IN shank for dependable, low-maintenance core drilling and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4149702042NW Type: Ultra 35 Product: Core drill Label: Kernbohrer Ultra 35 D.42mm Quick IN FEIN Material: carbide-tipped Facts Diameter: 42 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Shank: Quick IN 18 mm Special features Carbide-tipped for extended wear resistance Quick IN shank 18 mm for fast changeovers Metric dimensions High service life and excellent cutting performance Shank design: Quick IN FAQ What materials is the Ultra 35 Core Drill suited for? The Ultra 35 core drill, carbide-tipped and robustly designed, is intended for applications where wear resistance and consistent cutting are required; material compatibility should be checked against specific workpiece conditions. How does the Quick IN shank benefit workshop workflows? A Quick IN 18 mm shank enables rapid, repeatable tool changes in compatible quick-change systems, reducing setup time and improving process continuity with the Ultra 35 core drill. What core depth can be achieved with this tool? The tool provides a 35 mm cutting depth, suitable for standard core removal where a single-pass core is required. How many cutting edges does the drill have and why does it matter? The drill has 6 cutting edges, which distribute cutting forces, reduce vibration and help produce cleaner hole walls and cores. Is the Ultra 35 suitable for serial production? With its focus on high tool life and fast changeovers, the Ultra 35 core drill is well suited to repetitive tasks and medium-run serial production. Manufacturer: C. & E. Fein GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped 6-Flute, 35mm Cut Depth Quick IN Shank - C. & E. Fein GmbH
Take advantage of carbide-tipped construction and the Quick IN 18 mm shank for faster set-up and longer tool life; the 35 mm cutting depth and six cutting edges ensure efficient material removal in demanding metalworking tasks — order directly via Metav Werkzeuge or consult our specialists for application guidance Ultra 35 Annular Cutter D 23 mm (Carbide-tipped, Quick IN shank) by Fein The Ultra 35 annular cutter is a precision core drill designed for rapid, clean holemaking in metal fabrication and industrial workshop environments *Carbide-tipped for maximum wear resistance *Quick IN 18 mm shank for rapid tool change *35 mm cutting depth for deep boring *Six cutting edges for fast material removal Improve cycle times with efficient, clean holemaking The carbide-tipped construction delivers high wear resistance and consistent edge stability, allowing stable cutting over extended runs. With a 23 mm diameter and 35 mm cutting depth, this hole cutter reduces the need for multiple passes and minimises rework. The combination of multiple teeth and robust tip material means chips evacuate cleanly, which lowers the risk of tool chatter and improves surface finish. These performance characteristics translate into measurable throughput gains on production lines and dedicated machine cells. Faster changeovers and predictable tool life for less downtime A Quick IN shank (18 mm) enables swift, tool-holder-compatible exchanges that reduce machine downtime and speed up job changes. The tool’s six cutting edges distribute cutting forces more evenly, improving feed stability and reducing peak wear. With an overall length of 77 mm, the cutter balances rigidity and accessibility in confined setups. For procurement and planning, these attributes support a more predictable maintenance cycle and help stabilise output quality across shifts. Versatile use across metalworking tasks with straightforward handling Designed as an industrial annular cutter for fabricators and maintenance workshops, this core drill performs well in a range of common materials due to its carbide tipping and engineered geometry. The solid, metric dimensions simplify tool selection for standardised fixtures and jigs. Handling and mounting remain straightforward thanks to the Quick IN interface, helping machinists maintain focus on process control rather than tooling logistics. The result is consistent hole quality and fewer interruptions in production. For precision results and reliable uptime, contact Metav Werkzeuge in Emmerich to discuss how the Ultra 35’s carbide-tipped design and Quick IN shank can optimise workshop workflows; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4149702023NW Type: Ultra 35 Product type: Annular cutter Manufacturer: C. & E. Fein GmbH Facts Diameter: 23 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Shank: Quick IN 18 mm Special features Carbide-tipped (HM-bestückt) Quick IN shank 18 mm Metric dimensions High wear resistance Optimised for efficient chip evacuation FAQ What materials is this annular cutter suitable for? This Ultra 35 annular cutter is carbide-tipped and is suitable for general metalworking tasks typically found in fabrication and maintenance workshops. How does the Quick IN shank affect setup time? The Quick IN 18 mm shank on the Ultra 35 enables rapid tool changes and straightforward mounting, reducing machine downtime during tool swaps. Can the cutter achieve the full 35 mm depth in one pass? Yes, the specified cutting depth is 35 mm and the cutter is designed for single-pass holemaking to that depth where machine and workpiece conditions permit. Is regrinding possible for this carbide-tipped tool? Regrinding of carbide-tipped tools depends on workshop capabilities; specific decisions for the Ultra 35 should consider carbide repair expertise and cost-effectiveness. What benefits does having six cutting edges provide? Six cutting edges improve material removal rates and distribute load across the tool, yielding smoother cutting action and longer service life for the Ultra 35 annular cutter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN 35mm Cutting Depth, Quick IN Shank - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped cutting edges, a Quick IN 18 mm shank and a 35 mm cutting depth for reliable, efficient holemaking; order the Ultra 35 directly via Metav Werkzeuge or ask the consultants for application advice. Ultra 35 core drill — carbide-tipped annular cutter with Quick IN 18 mm shank and 35 mm cutting depth Ultra 35 core drill is designed for precise 30 mm holemaking with a 35 mm cutting depth, combining long tool life and fast changeovers for metalworking workshops Carbide-tipped for high tool life Quick IN 18 mm shank for fast changes 35 mm cutting depth for deep holes Six cutting edges for efficient chip removal Higher throughput through durable carbide cutting edges Equipped with carbide-tipped inserts and six cutting edges, this annular cutter delivers high tool life and consistent results in repetitive drilling tasks. The geometry reduces wear at the cutting zone, which leads to fewer tool changes and longer intervals between regrinds. For production environments where uptime matters, the Ultra 35 offers a tangible improvement in cycle reliability while maintaining hole quality. Faster setup and secure clamping with Quick IN technology The Quick IN shank (18 mm) allows for rapid tool exchange and secure retention in Quick IN-compatible holders. Reduced changeover time supports lean workflows and simpler machine planning. The cutter’s metric dimensions and standardised shank make it straightforward to integrate into existing toolsets, supporting efficient workplace organisation and predictable process times. Precise holes with efficient material removal With a 30 mm diameter and 35 mm cutting depth, the annular design removes only the material ring, lowering power demand compared with solid drills and producing clean bores ready for finishing. The combination of six cutting edges and optimised chip formation ensures efficient chip evacuation, reducing jamming and rework. This geometry benefits both manual and semi-automatic operations by delivering repeatable, burr-minimised holes. Contact Metav Werkzeuge in Emmerich for tailored advice on machining applications, compatibility with existing tool holders and expedited supply options for the Ultra 35 core drill Technical data Article number: 4149702030NW Type: Ultra 35 Product: Core drill Diameter: 30 mm Cutting depth: 35 mm Overall length: 77 mm Shank: Quick IN 18 mm Cutting edges: 6 Material: Carbide-tipped Packaging unit: 1 Facts Diameter: 30 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Special features Carbide-tipped inserts Quick IN shank design (18 mm) Metric dimensions Highest service life and excellent cutting performance FAQ What materials is the Ultra 35 core drill suitable for? The Ultra 35 core drill, with its carbide-tipped design, is intended for metalworking applications where carbide performance is required; choice of feed and speed depends on the workpiece material and machine capacity. How does the Quick IN shank affect setup time? The Quick IN shank (18 mm) enables rapid tool changes and secure clamping in compatible holders, reducing setup time and increasing productive machine availability. What hole size and depth does this cutter produce? This annular cutter produces a 30 mm diameter bore with a maximum cutting depth of 35 mm, providing consistent, repeatable holes for through or blind operations within that depth. How many cutting edges does the tool have, and what is the benefit? The tool has six cutting edges; this configuration promotes efficient chip removal and smoother cutting action, which helps to extend tool life and maintain hole quality. Is the Ultra 35 available individually or in sets? The Ultra 35 is supplied as a single item; the packaging unit for this SKU is 1 (Article number 4149702030NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 18mm, 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped durability, a Quick IN 18 mm shank for rapid tool changes and a 35 mm cutting depth that keeps production moving with fewer interruptions — order the tool directly via Metav Werkzeuge or ask their consultants for application advice. Fein Ultra 35 core drill — 49 mm, carbide-tipped with Quick IN shank The Fein Ultra 35 core drill is an annular cutter designed for efficient holemaking in workshop and industrial settings with a 35 mm cutting depth and a 49 mm cutting diameter Carbide‑tipped for extended service life Quick IN 18 mm shank for fast tool changes 49 mm diameter for precise annular holes 35 mm cutting depth for medium-depth drilling High-performance cutting that reduces cycle time The carbide‑tipped construction combined with 6 cutting edges delivers robust material removal and a consistent hole quality. With a 49 mm cutting diameter and a 35 mm effective cut, the tool completes annular holes with less axial force than solid drills, reducing machine load and lowering the risk of workpiece distortion. The total length of 77 mm and metric dimensions ensure predictable run-out and simple set-up on compatible holders. These technical choices result in fewer rejected parts and a measurable improvement in production throughput. Quick clamping and simple handling for less downtime Equipped with a Quick IN shank of 18 mm, the cutter enables rapid insertion and removal from Quick IN tool holders, shortening changeover times between operations. The annular cutter principle removes a metal ring rather than the whole core, which means lighter chips and easier chip evacuation; this supports smoother finishes and less vibration during cutting. The HM (hard‑metal) tip retains sharpness over extended runs, so tool changes are less frequent and setup time is reduced — a direct benefit for busy workshops and maintenance teams. Designed for workshop integration and dependable value The tool comes as a single unit (packaging unit: 1) and is suitable for integration into standard Quick IN tool systems. Its combination of excellent cutting performance and engineered shank design simplifies inventory management and keeps tooling compatible across multiple machines. Metav’s position as a precision partner complements the product: decades of know-how, a broad catalogue and dependable logistics from Emmerich make it straightforward to source replacements or compatible holders. The result is an accessible path to professional‑grade holemaking without sacrificing long‑term reliability. Contact Metav Werkzeuge for a tailored recommendation on the Fein Ultra 35 core drill (SKU 4149702049NW) and arrange procurement or technical advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4149702049NW Type: Ultra 35 Product: Core drill (annular cutter) Brand: C. & E. Fein GmbH Core measurements Diameter: 49 mm Cutting depth: 35 mm Total length: 77 mm Cutting edges: 6 Shank: Quick IN, 18 mm Materials & special features Carbide‑tipped (HM) Quick IN shank 18 mm Highest service life and excellent cutting performance Metric dimensions Shank design: Quick IN FAQ What is the cutting depth of the Ultra 35 core drill? The Fein Ultra 35 core drill (SKU 4149702049NW) provides a cutting depth of 35 mm, suitable for medium‑depth annular drilling tasks. Which shank system does the cutter use? The tool is supplied with a Quick IN shank of 18 mm, designed for rapid mounting in Quick IN compatible holders. How large is the hole produced by this annular cutter? The cutter creates a 49 mm diameter annular hole using its carbide‑tipped cutting ring. How many cutting edges does the tool have and what is the benefit? The cutter features 6 cutting edges, which help achieve smoother cutting action and improved chip formation compared with fewer‑edged designs. How is the Fein Ultra 35 supplied? The product is supplied as a single unit (packaging unit: 1) and is ready for installation in compatible Quick IN systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 18mm, 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of a carbide-tipped coring solution that combines extended tool life, rapid Quick IN shank changes and precise 35 mm cutting depth for consistent hole quality; order directly via Metav Werkzeuge or consult our specialists for application advice Ultra 35 Core Drill, 48 mm — Quick IN, FEIN The Ultra 35 Core Drill is a carbide-tipped core cutter designed for short, precise 35 mm coring operations, equipped with a Quick IN 18 mm shank for fast tool changes and high productivity in industrial settings Carbide-tipped for extended tool life Quick IN 18 mm shank for fast changeover 35 mm effective cutting depth 48 mm diameter for large cores Increase uptime with durable, carbide cutting geometry The carbide-tipped construction (HM-bestückt) and the configuration of 6 cutting edges deliver durable performance and predictable wear behaviour. This reduces the frequency of regrinds and replacements, so cycle times remain stable and maintenance windows shrink. The robust cutter geometry is geared towards repeatable coring with minimal burr formation, supporting continuous production runs where consistency matters most. The design balances cutting aggressiveness and tool life to achieve lower total cost of ownership. Rapid tool changes to keep production flowing The Quick IN shank with an 18 mm interface enables fast, secure mounting in compatible tool holders, cutting setup time and lowering machine downtime. Quick-change capability simplifies tool handling during multi-operation workflows and supports efficient tool management on the shop floor. Metric dimensions throughout ensure compatibility with standard holders and adaptors, allowing integration into existing toolsets without complex adapters or reconfiguration. Precise cores and less rework for higher throughput A defined 35 mm cutting depth combined with a 48 mm diameter produces consistent core sizes suitable for downstream operations. The core cutter’s geometry promotes clean evacuation of swarf and stable hole walls, which reduces secondary finishing and inspection time. Operators benefit from predictable hole quality, while process planners can rely on repeatable results for batch production and small-series work alike. Industrial-grade construction and application notes The item’s HM-tipped construction and specific shaft design focus on longevity under demanding conditions. The cutter’s overall length of 77 mm and compact profile are intended for controlled coring where access and rigidity are important. For toolholder compatibility, confirm Quick IN receptacle sizing and arbor requirements prior to use; for bespoke setups or further technical specifications, Metav’s technical team can advise on correct mounting and feed parameters to match material and machine capability. Secure the Ultra 35 Core Drill with Quick IN shank from FEIN through Metav Werkzeuge for dependable coring performance; contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application guidance Technical data Article number: 4149702048NW Type: Ultra 35 Product type: Core drill Manufacturer: C. & E. Fein GmbH UID: 4149702048NW Facts Diameter: 48 mm Overall length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Packaging unit: 1 Special features Carbide-tipped (HM-bestückt) Quick IN shank 18 mm Metric dimensions Highest service life and excellent cutting performance Shaft design: Quick IN FAQ What is the maximum cutting depth of the Ultra 35 core drill? The Ultra 35 core drill offers an effective cutting depth of 35 mm, suitable for controlled coring operations requiring shallow, precise holes. Which shank interface does the cutter use? The cutter is delivered with a Quick IN 18 mm shank, enabling fast and secure changeovers in compatible tool holders. How many cutting edges does the cutter have and why does it matter? The design incorporates 6 cutting edges, which improves cut distribution and service life by spreading wear across multiple flutes for more consistent performance. Can this core drill be used with standard metric toolholders? Yes, the Ultra 35 uses metric dimensions and a Quick IN shank that is compatible with holders designed for an 18 mm Quick IN interface; confirm holder compatibility before mounting. Who manufactured this product and what is its SKU? This core drill is produced by C. & E. Fein GmbH and is listed under SKU 4149702048NW, Ultra 35 core drill, Quick IN configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of a high‑performance annular cutter that combines carbide‑tipped durability, a fast Quick IN 18 mm shank and a 35 mm cutting depth for consistent production throughput; order directly via Metav Werkzeuge or ask the consultants for application advice. Fein Ultra 35 Core Drill (annular cutter), 44 mm – Carbide‑tipped, Quick IN 18 mm shank The Fein Ultra 35 core drill is a carbide‑tipped annular cutter designed for precise 44 mm holes with a 35 mm cutting depth, optimised for quick tool changes in professional metalworking environments Carbide‑tipped for extended tool life Quick IN 18 mm shank for fast tool changes 44 mm diameter for large core holes 35 mm cutting depth for deep through‑holes High productivity through optimised cutting geometry and durable tip The annular cutter is equipped with a carbide‑tipped cutting head that delivers excellent machining performance and a prolonged service life under continuous use. With a nominal 44 mm diameter and 35 mm cutting depth, the tool is configured for efficient metal removal while maintaining clean hole walls. The design supports stable chip formation and reduces the number of passes required, which translates into measurable time savings on repetitive tasks. This focus on technical performance addresses the core requirement of productive workshops: reliable, repeatable holes with minimal tool changes. Faster changeovers and stable hole accuracy with Quick IN A central advantage is the Quick IN shank system (18 mm) that significantly reduces clamping time and aligns the cutter precisely in compatible toolholders. The 6 cutting edges contribute to a smooth cut and help distribute cutting forces evenly, supporting dimensional accuracy and prolonging tip life. The annular cutter’s configuration allows rapid replacement in production environments, reducing non‑productive time and simplifying tool logistics for maintenance teams and operators alike. The combination of quick coupling and robust geometry is particularly suited to demanding, batch‑oriented workflows. Practical workshop benefits and robust dimensions With a total length of 77 mm and metric dimensions throughout, this core drill integrates easily into standard setups and magnetic drilling bases that accept Quick IN tooling. The single‑unit packaging makes it straightforward to allocate the cutter to specific stations or job sets. The cutter’s specification emphasises durability and consistent results rather than frequent resharpening cycles, which supports predictable planning of consumables and lowers the risk of rework. For metalworking professionals seeking a dependable annular cutter for series drilling, the design offers a clear balance of lifetime performance and operational convenience. Secure the Fein Ultra 35 annular cutter with Quick IN 18 mm shank from Metav Werkzeuge for reliable long‑life performance and improved production throughput; contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply. Technical data Article number: 4149702044NW Type: Ultra 35 Product: Core drill (annular cutter) Manufacturer: C. & E. Fein GmbH Packaging unit: 1 Facts Diameter: 44 mm Cutting depth: 35 mm Total length: 77 mm Shank: Quick IN 18 mm Cutting edges: 6 Special features Carbide‑tipped Quick IN shank 18 mm Metric dimensions Highest service life and excellent machining performance FAQ What hole size and depth does this annular cutter deliver? The Fein Ultra 35 annular cutter produces a 44 mm diameter hole with a 35 mm cutting depth (SKU 4149702044NW), suitable for through‑hole and blind hole applications within the specified depth. Which shank system is required for this core drill? This core drill uses a Quick IN 18 mm shank, compatible with Quick IN toolholders and adapters designed for rapid, repeatable tool changes. How does the carbide tip benefit industrial use? The carbide‑tipped geometry of the cutter increases wear resistance and maintains cutting performance under continuous operation, making it suitable for repetitive production tasks. What is the advantage of six cutting edges? Six cutting edges help distribute cutting forces and support smoother chip formation, contributing to consistent hole quality and extended tip lifetime for the cutter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the carbide-tipped durability and the Quick IN 18 mm shank for consistent, high-throughput core drilling; the 35 mm cutting depth and six cutting edges deliver reliable hole quality and reduced rework. Order directly via Metav Werkzeuge or consult our technical team for application-specific guidance. Ultra 35 core drill D19 mm (Quick IN) by C. & E. Fein — carbide-tipped, 35 mm cutting depth The Ultra 35 core drill D19 mm is a carbide-tipped core drill designed for precise, repeatable 35 mm deep holes in production and workshop environments, engineered for fast changeover with a Quick IN 18 mm shank. Carbide-tipped for extended tool life Quick IN 18 mm shank for fast tool changes 35 mm cutting depth for standard core holes Six cutting edges for efficient material removal Consistent performance through carbide-tipped cutting geometry The tungsten carbide-tipped design provides the primary benefit of extended service life and predictable wear patterns, which reduces downtime for tool changes. With a focus on stable cutting behaviour, the tool achieves efficient material removal while maintaining hole accuracy, so fewer parts fall outside tolerance and less time is spent on reworking components. This translates into measurable gains in production efficiency for repetitive drilling tasks. Rapid changeover and stable clamping for uninterrupted workflows The Quick IN system with an 18 mm shank shortens tool-change cycles and simplifies alignment on compatible chucks, mitigating machine idle time. Quick insertion and secure locking promote repeatable concentricity and reduced runout, which helps maintain finish quality across batches. In combination with its metric design, the shank concept supports seamless integration into standard tool holders and quick-change systems on the shop floor. Exact hole dimensions with optimised cutting geometry With a 19 mm diameter, 35 mm cutting depth and six cutting edges, the core drill balances cutting aggressiveness with hole quality. The multiple-edge geometry distributes cutting forces, decreasing vibration and improving surface finish inside the bore. The tool’s 77 mm total length keeps the working area compact while allowing sufficient reach for many common fixturing setups. These attributes make the drill suitable where consistent hole diameter and depth are critical. Practical applications and operational advantages The design choice behind the tool suits frequent, standard-depth core drilling where tool longevity and speed are priorities. The combination of high service life and fast clamping reduces total cost of ownership in serial production. For workshops seeking reliable consumables that simplify inventory management, this core drill offers a strong balance of durability and ease of use, supporting smoother production planning and fewer unexpected interruptions. For application advice or to procure the C. & E. Fein Ultra 35 core drill with Quick IN shank, contact Metav Werkzeuge for tailored recommendations and order handling at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4149702019NW Manufacturer: C. & E. Fein GmbH Product type: Core drill Model: Ultra 35 Label: Kernbohrer Ultra 35 D.19mm Quick IN FEIN Dimensions & capacities Diameter: 19 mm Total length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Shank: Quick IN 18 mm Design & special features Tungsten carbide-tipped Quick IN shank 18 mm Metric dimensions Highest service life and excellent material removal performance Packaging unit: 1 FAQ What chuck or holder is required for the Quick IN shank? The Ultra 35 core drill D19 mm is designed for a Quick IN 18 mm shank; use a compatible Quick IN holder or chuck to ensure secure clamping and repeatable concentricity. How deep can the drill cut in a single operation? The tool provides a 35 mm cutting depth, which specifies the effective depth for core drilling with this model. How many cutting edges does the drill have and what is the benefit? This core drill has six cutting edges, which distribute cutting forces to reduce vibration and improve bore surface finish. Is the cutting tip integral or tipped with carbide? The drill is tungsten carbide-tipped, offering increased wear resistance and longer service life compared with standard high-speed steel tooling. What is the total length of the tool and how does that affect use? The 77 mm total length keeps the overall tool compact for improved handling and is suitable for many standard fixturing arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide‑tipped construction, an 18 mm Quick IN shank and a 35 mm cutting depth for reliable production drilling; order the core drill directly via Metav Werkzeuge or contact the consultants for application advice. Ultra 35 Core Drill – 28 mm, Quick IN shank (FEIN) The Ultra 35 core drill is a carbide‑tipped holemaking tool with an 18 mm Quick IN shank, designed for consistent 35 mm cutting depth and metric compatibility in industrial applications. Carbide‑tipped for long tool life 18 mm Quick IN shank for secure clamping 35 mm cutting depth for standard core holes Metric dimensions for machine compatibility Faster production through durable cutting geometry The Ultra 35 delivers high machining performance thanks to its carbide‑tipped construction and six cutting edges. These design choices reduce wear rates and extend tool life, which translates into fewer tool changes and less downtime on the shop floor. In concrete terms, carbide tipping provides thermal and abrasion resistance during sustained operation; the result is a steady holemaking process and predictable cycle times that support productivity planning. Quick tool changes and stable clamping for efficiency Equipped with an 18 mm Quick IN shank, this core drill enables rapid insertion and secure clamping in compatible holders. The Quick IN system shortens changeover time and improves concentricity compared with conventional shanks, contributing to more consistent hole quality. This stability reduces rework risk and supports automated or semi‑automated machining sequences where repeatability is required. Designed for precise, standard‑depth core holes With a 35 mm cutting depth and metric dimensions, the tool is suitable for common core‑drilling tasks where standard depths are specified. The six cutting edges are arranged to balance material removal and surface finish, producing clean cores with reduced burr formation. The metric sizing simplifies integration into European machine tooling standards and makes replacement planning straightforward. Practical benefits for the workshop and procurement The Ultra 35 is supplied as a single unit and is intended for professional workshops and industrial users seeking a combination of durability and quick handling. The tool’s specification supports inventory rationalisation: its standardised shank and metric sizing allow the same holder and procedures to be used across multiple operations. For purchasing, the focus on longevity and reduced downtime often yields a favourable return on investment in busy production environments. Contact Metav Werkzeuge today to secure FEIN’s Ultra 35 core drill with Quick IN shank for improved uptime and consistent hole quality — technical advice and ordering assistance are available from Metav Werkzeuge. Technical data Article number: 4149702028NW Product type: Core drill Brand: FEIN (C. & E. Fein GmbH) Facts Diameter: 28 mm Total length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Packaging unit: 1 Special features Material: Carbide‑tipped (HM‑tipped) Shank: Quick IN shank 18 mm Metric dimensions High tool life and excellent machining performance Shank execution: Quick IN FAQ What materials is the Ultra 35 core drill suitable for? The Ultra 35 core drill (FEIN) is carbide‑tipped, designed for high machining performance; material suitability depends on the workpiece and machining parameters, so matching speeds and feeds to the component is recommended. How is the Ultra 35 secured in the machine? The tool uses an 18 mm Quick IN shank for rapid insertion and stable clamping, ensuring concentric mounting and reduced run‑out during drilling. What is the effective cutting depth of the Ultra 35? The tool provides a 35 mm cutting depth, specified for standard core‑hole applications. How many cutting edges does the tool have and what is the benefit? The core drill features six cutting edges, which balance material removal and surface finish while extending service intervals. Can the Ultra 35 reduce downtime in series production? Yes, the combination of carbide‑tipped construction and the Quick IN shank helps lower tool change frequency and supports consistent hole quality, contributing to reduced downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Benefit from the combination of carbide-tipped construction, a Quick IN 18 mm shank and a 35 mm cutting depth for dependable core drilling with long tool life — order the FEIN Ultra 35 directly via Metav Werkzeuge or contact our specialists for specific application guidance. Kernbohrer Ultra 35 D.27mm Quick IN FEIN — Carbide‑tipped core drill with Quick IN shank and 35 mm cutting depth Kernbohrer Ultra 35 D.27mm Quick IN FEIN is a compact core drill designed for precise holemaking in demanding workshop and trade applications, offering a balance of endurance and efficient material removal Carbide‑tipped for extended tool life Quick IN shank 18 mm for fast changeover 35 mm cutting depth for standard core holes Six cutting edges for smooth core formation Built for endurance and predictable performance The carbide‑tipped design ensures high wear resistance under continuous use, translating into longer intervals between tool changes and lower operating costs. The cutter’s geometry with six cutting edges reduces vibration and produces a cleaner core, which benefits workshops that require repeatable hole quality. For purchasers evaluating cutting tools, the core drill’s construction means fewer rejects and steadier cycle times on standard bench and portable drilling rigs. Faster changeovers and less production downtime Equipped with the Quick IN shank 18 mm, the system permits rapid fitting into compatible holders, shortening set‑up time and improving machine utilisation. The 18 mm interface follows common quick‑change standards, so tool swaps become a routine, time‑saving operation rather than a bottleneck. This practical feature supports lean workflows in small production runs and on‑site service jobs where time efficiency directly affects project margins. Precision holemaking with clear application scope With a 27 mm diameter and 35 mm cutting depth, this core drill is optimised for through and partial holes in a variety of materials where a stable, metric specification is required. The 77 mm overall length keeps the tool compact for confined working spaces while still providing sufficient reach for typical tasks. Novice buyers should note that “carbide‑tipped” indicates hard cutting edges brazed or mounted on a steel body to combine toughness with cutting performance — a benefit when drilling abrasive or mixed materials. Practical benefits for workshop and service environments The tool’s measured design, including the Quick IN shaft and robust cutting geometry, reduces the need for frequent regrinding and replacement. The combination of reliable core quality and long operational life supports procurement strategies that favour fewer tool types with broader application ranges. For tradespeople and maintenance technicians, the result is consistent hole quality with less inventory complexity and predictable tool replacement cycles, backed by Metav’s availability and advisory service. For workshop managers seeking reliable drilling performance, contact Metav Werkzeuge for technical advice and stock availability of the FEIN Ultra 35 core drill with Quick IN shank. Technical data Article number: 4149702027NW Type: Ultra 35 Brand: C. & E. Fein GmbH Product: Core drill Facts Diameter: 27 mm Overall length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Shank: Quick IN 18 mm Packaging unit: 1 Features Carbide‑tipped Quick IN‑shank 18 mm Highest service life and excellent cutting performance Metric dimensions FAQ What materials can be machined with this core drill? The FEIN Ultra 35 core drill, with its carbide‑tipped geometry, is suited for a broad range of workshop materials; suitability for specific substrates should be confirmed against the workpiece and machine used. Is the shank compatible with quick‑change holders? The tool features a Quick IN shank 18 mm, designed for compatibility with common quick‑change systems that accept an 18 mm Quick IN interface. How deep can this core drill cut in one pass? The rated cutting depth is 35 mm, which defines the effective material removal depth for standard operations. How many cutting edges does the drill have and what is the benefit? The cutter has six cutting edges, which promotes smoother core formation and reduces vibration during drilling. Is the tool supplied individually or in a set? The item is supplied in a packaging unit of 1, matching typical single‑tool purchasing for replacement or specific job requirements. Manufacturer: C. & E. Fein GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 HM-Tipped With Quick IN 18mm Shank, 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped durability, a Quick IN 18 mm shank for rapid tool changes and a 35 mm cutting depth for efficient core drilling; order directly via Metav Werkzeuge or consult our specialists for application advice. Ultra 35 Core Drill, 26 mm — carbide-tipped with Quick IN 18 mm shank (C. & E. Fein) Ultra 35 Core Drill is a high-performance, carbide-tipped core drill designed for precision metalworking and workshop use, offering fast tool changes and consistent hole quality in metric dimensions. Carbide-tipped for extended tool life Quick IN 18 mm shank for rapid tool changes 35 mm cutting depth for efficient cores Six cutting edges for smooth material removal Reliable material removal with long service life The carbide-tipped construction provides superior wear resistance compared with standard high-speed steel; this translates into high tool life and fewer tool changes during longer runs. The drill’s six cutting edges distribute cutting forces evenly, reducing vibration and producing cleaner cores with less burring. For workshop and industrial environments where uptime matters, this combination reduces rework and supports predictable production times. Quick-change shank to minimise downtime Equipped with a Quick IN 18 mm shank, the Core Drill allows rapid insertion and secure clamping in compatible holders, shortening changeover times and maintaining production flow. The shank system is designed for straightforward handling on drilling stands and portable machines that accept Quick IN tooling, enabling faster transitions between operations and lowering non-productive time without sacrificing stability. Precise cores and consistent fitment in assemblies With a 26 mm diameter and 35 mm cutting depth, the tool is optimised for creating precise core holes that require minimal finishing. The overall length of 77 mm balances rigidity and accessibility, enabling clean penetration into workpieces while maintaining control. Metric dimensions and consistent geometry support repeatable hole tolerances, which helps to reduce downstream adjustments in assembly or component fitting. Designed for professional workshop use and easy integration Manufactured with industry-grade specifications and clear metric sizing, the core drill integrates easily into established tool sets. The combination of robust carbide-tipped cutting edges and a proven quick-change interface supports demanding sequences in production or repair work. For users unsure about compatibility with existing holders or machines, further technical guidance is available to ensure the tool meets operational requirements. For tailored advice on using the Ultra 35 Core Drill or to secure supply and compatible tooling, contact Metav Werkzeuge GmbH by email or phone — the Metav team will advise on the right configuration for uninterrupted production Technical Data Article number: 4149702026NW Label: Kernbohrer Ultra 35 D.26mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Facts Diameter: 26 mm Cutting depth: 35 mm Total length: 77 mm Cutting edges: 6 Shank: Quick IN 18 mm Packaging unit: 1 Special features Carbide-tipped Quick IN shank design Highest stand time and excellent cutting performance Metric dimensions FAQ What is the cutting depth of this core drill? The Ultra 35 Core Drill provides a 35 mm cutting depth, suitable for producing precise cores within that depth range. Which shank standard is used for tool holding? The tool is fitted with a Quick IN 18 mm shank, optimised for holders and chucks that support the Quick IN quick-change system. How many cutting edges does the drill have and why does that matter? This core drill features six cutting edges, which improve chip evacuation and produce smoother hole walls compared with fewer-edge designs. Is the tool carbide-tipped and what benefit does that give? Yes — the core drill is carbide-tipped, offering superior wear resistance and extended service life in demanding drilling operations. What is the article number for ordering or reference? The article number (SKU) is 4149702026NW, which can be quoted when requesting stock or technical details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 Quick IN Carbide Tipped 35mm Cut Depth, Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped tooling and a fast-change Quick IN shank for efficient, repeatable core drilling in workshop and light industrial settings; order directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Core Drill Ultra 35 D.35mm Quick IN FEIN — carbide-tipped core drill with Quick IN shank, 35 mm cutting depth (C. & E. Fein) The Core Drill Ultra 35 D.35mm Quick IN FEIN is a carbide-tipped core drill engineered for fast, clean 35 mm bores in routine workshop and production tasks, suited to portable and machine-mounted drilling equipment. Carbide-tipped for extended life Quick IN shank 18 mm for fast tool changes 35 mm cutting depth for standard core holes Six cutting edges for smooth cutting High-performance cutting for longer production runs The cutter’s carbide-tipped design and six cutting edges deliver an optimised balance between cutting speed and wear resistance. Carbide tips (Hartmetall) are specifically used to resist abrasion and heat at the cutting zone; this results in longer tool life and fewer changeovers compared with standard HSS options. For workshops needing predictable tool replacement intervals, this translates directly into reduced downtime and steadier throughput. Fast tool changes and practical dimensions for efficient workflows Equipped with a Quick IN shank 18 mm, the core drill permits rapid clamping and release in compatible holders, shortening set-up times on both hand-held rigs and machine spindles. The combination of 35 mm cutting depth and overall length 77 mm provides a compact footprint while allowing standard core-hole depths without excess stick-out. The metric sizing simplifies selection for European tooling systems and ensures easy integration into existing toolsets. Practical use, care and support for workshop environments Designed as a reliable core-drilling solution for workshops and service shops, this tool offers precise bore control with minimal vibration thanks to its multi-flute geometry. Regular inspection of the cutting edges and correct feed rates extend service life; the cutter is supplied singly and is compatible with Quick IN holders. If application specifics or material compatibility are uncertain, Metav’s consultancy and technical team can advise on correct feeds, speeds and holder selection to maximise performance. For tailored advice or to secure supply of the Ultra 35 core drill, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast delivery Technical data SKU: 4149702035NW Type: Ultra 35 Product: Core drill Label: Kernbohrer Ultra 35 D.35mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Material: carbide-tipped Diameter: 35 mm Overall length: 77 mm Cutting depth: 35 mm Shank: Quick IN shank 18 mm Cutting edges: 6 Pack unit: 1 Facts Diameter: 35 mm Overall length: 77 mm Cutting depth: 35 mm Shank diameter: 18 mm Cutting edges: 6 Special features Carbide-tipped for high wear resistance Quick IN shank 18 mm for rapid tool changes Metric dimensions for easy integration Highest service life and excellent cutting performance FAQ What materials is this core drill suitable for? The core drill’s carbide-tipped geometry is intended for general core-drilling tasks across standard workshop materials; for confirmation on a specific material, please consult Metav Werkzeuge with details of the job. How does the Quick IN shank affect setup time? The Quick IN shank 18 mm enables fast clamping and release in compatible holders, reducing machine downtime and facilitating quick tool swaps during batch operations. What are the dimensions and cutting depth of the tool? The Ultra 35 has a diameter of 35 mm, an overall length of 77 mm and a cutting depth of 35 mm (SKU 4149702035NW), suitable for standard core-hole applications. How many cutting edges does the cutter have and what is the benefit? This core drill has six cutting edges; the multi-flute arrangement smooths chip evacuation and promotes a cleaner bore with reduced vibration. How should the tool be maintained to maximise life? Regular inspection of the carbide tips, correct feed and speed settings and secure clamping in a Quick IN holder will help preserve cutting performance and extend service intervals for the Ultra 35. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 Solid Carbide Quick IN Shank 18mm, 35mm Cut Depth - C. & E. Fein GmbH
Reliable performance for demanding metalwork: carbide-tipped cutting edges, a Quick IN shank for fast tool changes and a precise 35 mm cutting depth combine to deliver consistent production results. Order the tool directly via Metav Werkzeuge or consult the team for application advice. Ultra 35 core drill D.13 mm – carbide-tipped annular cutter with Quick IN shank (Fein) The Ultra 35 core drill is a carbide-tipped annular cutter designed for precise 13 mm through-holes and clean 35 mm bore depths in metalworking and workshop environments. Carbide-tipped for long tool life Quick IN shank 18 mm for rapid changes 13 mm diameter with 35 mm cutting depth Four cutting edges for smooth chip evacuation Consistent machining with carbide-tipped cutting edges The Ultra 35 is built with a carbide-tipped cutting system that significantly increases wear resistance compared with high-speed steel alone. The combination of a 13 mm bore and 35 mm cutting depth gives a defined working envelope that supports reproducible hole geometry and predictable tool life. With four cutting edges, the tool achieves smooth chip formation, reduced vibration and stable cutting forces, which lowers rework and keeps cycle times tight. Faster changeovers and steady guidance with Quick IN The Quick IN shank 18 mm provides secure clamping and a quick connection to compatible holders, reducing tool-change time in busy production environments. This shank concept improves axial guidance during drilling, which helps maintain concentricity and surface finish in demanding applications. Rapid insertions and removals cut setup time and contribute directly to throughput gains on batch work and repetitive tasks. Precise holes, less material removal, easy integration As an annular cutter, this tool removes only the material necessary to form the hole’s wall, producing a solid core rather than grinding the whole cylinder away. The result is less power draw, faster cycles and cleaner holes with minimal burrs. Metric dimensions and an overall length of 77 mm make the tool simple to plan into existing process chains and fixtures. For specialised applications or further technical data, Metav’s workshop-focused advisers are available to discuss integration and optimised cutting parameters. For precision metalworking tasks where durability and quick tool changes matter, choose the Ultra 35 with its carbide-tipped cutting edges and Quick IN shank — contact Metav Werkzeuge for tailored advice and product availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4149702013NW Designation: Ultra 35 core drill D.13 mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Facts Diameter: 13 mm Cutting depth: 35 mm Total length: 77 mm Cutting edges: 4 Shank: Quick IN shank 18 mm Special features Carbide-tipped (HM-bestückt) Highest tool life and excellent machining performance Metric dimensions Shank execution: Quick IN FAQ What materials is this annular cutter suitable for? The Ultra 35 core drill is supplied carbide-tipped for general metalworking and delivers robust wear resistance; selection of feed and speed should match the workpiece hardness and machine capability. Is the Quick IN shank compatible with standard holders? Quick IN shank 18 mm requires holders or adaptors that accept the Quick IN interface; compatibility ensures secure clamping and the fast changeovers described in the technical data. How deep can the Ultra 35 cut in a single pass? The specified cutting depth is 35 mm; this defines the maximum material engagement for a single drilling operation with this tool. How does an annular cutter differ from a twist drill in practice? An annular cutter removes only the peripheral material to form the hole, producing a slug rather than full-chip removal; this generally yields faster cycles and lower energy consumption for the same hole diameter. What maintenance extends the life of the cutter? Maintaining correct speeds and feeds, ensuring secure shank clamping and periodic inspection of cutting edges will preserve the Ultra 35’s performance and prolong service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 Solid Carbide Quick IN Shank 18mm, 35mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of tungsten carbide‑tipped cutting edges, the time‑saving Quick IN 18 mm shank and a 35 mm cutting depth for reliable core drilling in metalworking; order the Ultra 35 annular cutter directly via Metav Werkzeuge or consult our specialists for application advice. Ultra 35 annular cutter — 22 mm, tungsten carbide‑tipped with Quick IN 18 mm shank (Fein) The Ultra 35 annular cutter is a professional core‑drilling tool designed for fast, precise metal holemaking with a 35 mm cutting depth and a Quick IN shank for rapid tool changes. Tungsten carbide‑tipped cutting teeth Quick IN shank 18 mm for fast tool change 35 mm cutting depth for deep core holes Designed for high wear resistance and life Precision core holes with efficient material removal The annular cutter delivers clean, burr‑reduced holes by removing only the material at the perimeter rather than the full core. The 22 mm diameter and 35 mm cutting depth enable consistent through‑hole or blind hole production in production and maintenance settings. With six precisely ground cutting edges, chip formation is controlled and heat build-up reduced, which results in steadier feeds and longer service intervals. The tungsten carbide‑tipped inserts provide abrasion resistance and preserve the cutting geometry under demanding conditions, improving productivity and reducing rework. Fast tool changes and predictable workshop flow The Quick IN 18 mm shank simplifies clamping and markedly reduces machine downtime when multiple cutters are required. Metric dimensions ensure compatibility with common industrial setups and make inventory management straightforward. The Ultra 35’s design emphasises repeatability: consistent hole diameters and axial guidance translate into fewer secondary operations. The combination of quick change capability and robust insert technology supports higher throughput in fabrication, maintenance and on‑site machine work. Longevity and dependable cutting performance Constructed with tungsten carbide‑tipped edges and engineered for extended service life, this annular cutter targets professionals who prioritise reliability. The cutter’s geometry and material pairing offer excellent cutting performance under cyclic loads, which lowers tool consumption and contributes to a more economical workshop operation over time. Where process stability matters, the tool’s wear resistance reduces the frequency of tool replacement and supports a predictable production rhythm. Contact Metav Werkzeuge for tailored technical advice on the Fein Ultra 35 annular cutter and assistance with availability from our Emmerich warehouse Technical data SKU: 4149702022NW Product type: Annular cutter Product name: Ultra 35 annular cutter 22 mm Quick IN (Fein) Manufacturer: C. & E. Fein GmbH Facts Diameter: 22 mm Overall length: 77 mm Cutting depth: 35 mm Number of cutting edges: 6 Shank: Quick IN, 18 mm Packaging unit: 1 Special features Tungsten carbide‑tipped Quick IN shank 18 mm Highest service life and excellent cutting performance Metric dimensions FAQ What materials is this annular cutter suited for? The Ultra 35 annular cutter is specified with tungsten carbide‑tipped cutting edges and is intended for professional metal drilling tasks where high wear resistance and cutting performance are required. How does the Quick IN shank improve workshop efficiency? The Quick IN 18 mm shank on the Ultra 35 enables fast, repeatable tool changes, reducing machine downtime and supporting continuous production workflows. What hole depth can be achieved with this tool? The tool provides a cutting depth of 35 mm, allowing for deep core holes within that axial range when used in appropriate drilling equipment. How many cutting edges does the cutter have and why does that matter? The annular cutter features six cutting edges; the multiple edges improve chip evacuation and contribute to smoother cutting action and longer effective service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com