35mm Core Drill Ultra 35 With 6 Cutting Edges, HM Tipped, Quick IN Shank 18mm, 35mm Cut Depth - C. & E. Fein GmbH
Taking advantage of carbide-tipped cutting edges, a Quick IN 18 mm shank and a precise 35 mm cutting depth, this core drill delivers dependable holemaking for workshop and industrial applications; order directly via Metav Werkzeuge or consult the team for assistance. Fein Ultra 35 core drill D 39 mm — carbide-tipped, Quick IN 18 mm shank The Fein Ultra 35 core drill is a purpose-built core drilling tool for metalworking, offering a compact overall length and robust construction for repeatable, industrial-grade hole production. Carbide-tipped cutting edges Quick IN 18 mm shank 35 mm cutting depth Exceptional tool life and performance Boosted productivity through robust cutting geometry The core drill combines carbide-tipped cutting edges with 6 cutting edges to maintain cutting stability and reduce chatter in interrupted cuts. The result is consistent hole diameters at 39 mm with a defined 35 mm cutting depth, which shortens cycle times and lowers scrap rates. The reinforced geometry contributes to high tool life, meaning fewer tool changes and more continuous production, while the compact overall length supports use in confined setups without compromising rigidity. Fast tool changes and reliable fit for machine integration Equipped with a Quick IN shank (18 mm), the tool enables rapid, repeatable mounting and removal in compatible holders, reducing non-productive time during tool changes. Metric dimensions are maintained for straightforward process planning and CAM programming. The design ensures efficient chip evacuation and predictable hole finishes, which simplifies downstream tasks such as reaming or thread preparation. For workshops seeking measurable gains in throughput, the simplified handling and repeatable clamping are tangible benefits. Longevity, handling and workshop continuity The construction prioritises longevity and consistent machining performance, minimising unscheduled maintenance. The combination of carbide-tipped edges and an optimised flute geometry supports stable cutting forces and extended service intervals, contributing to reduced downtime. Spare-part planning is simplified by standard metric dimensions and the Quick IN interface, easing stock management for the procurement team. For uncertain cases regarding compatibility or advanced specifications, Metav Werkzeuge provides straightforward technical guidance. For availability, compatibility checks or to request purchase support for the Fein Ultra 35 core drill with Quick IN shank, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and expert advice Technical data Article number: 4149702039NW Type: Ultra 35 Product: Core drill Core technical figures Diameter: 39 mm Cutting depth: 35 mm Overall length: 77 mm Shank: Quick IN, 18 mm Cutting edges: 6 Features Carbide-tipped cutting edges Quick IN shank 18 mm Metric dimensions Exceptional tool life Excellent machining performance FAQ What shank type does the tool use and is it machine-compatible? The Quick IN shank is specified as 18 mm; the Fein Ultra 35 core drill fits holders and adapters designed for Quick IN interfaces and therefore integrates with compatible tool-change systems. What is the effective cutting depth and diameter for this core drill? The core drill offers a cutting depth of 35 mm with a nominal diameter of 39 mm, suitable for through and partial-hole applications within that depth. How many cutting edges does the cutter have and what is the benefit? The tool features six cutting edges, which enhance stability and produce a more uniform load distribution, improving hole quality and tool life. Is the tool suitable for use in tight working spaces? With an overall length of 77 mm and a compact shank interface, the design supports use in confined set-ups while maintaining rigidity for accurate drilling. How is wear resistance achieved in this core drill? Wear resistance is achieved through carbide-tipped cutting edges and an optimised flute geometry, which together extend service life and maintain performance under typical workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 With HM Tips, 35mm Cutting Depth, Quick IN Shank 18mm - C. & E. Fein GmbH
Benefit from the combination of carbide-tipped durability, a Quick IN 18 mm shank for fast changeovers and a 35 mm cutting depth that speeds core extraction. Order the core drill directly via Metav Werkzeuge or consult our specialists for application advice. FEIN Ultra 35 core drill (53 mm) — carbide-tipped with Quick IN 18 mm shank FEIN Ultra 35 core drill is a carbide-tipped core drill engineered for efficient, repeatable 35 mm deep core holes in metalworking and workshop applications Carbide-tipped for extended service life Quick IN 18 mm shank for fast changeovers 53 mm diameter for standard core holes 35 mm cutting depth for deep cores Faster production through durable cutting geometry The Ultra 35 delivers measurable productivity gains thanks to its carbide-tipped design and optimised tooth count. With 9 cutting edges, the tool maintains a steady cutting action that reduces vibration and heat build-up, which in turn extends tool life and reduces the frequency of replacements. For operations that prioritise uptime, this translates into fewer interruptions and a more consistent output per shift. Reduce setup time with the Quick IN system The Quick IN 18 mm shank is designed for rapid, secure tool changes. The standardised shank format enables quick fixturing in compatible holders, cutting changeover time and minimising workshop downtime. In practice, the fast clamping action supports busy production workflows and simplifies transitions between operations, so machine availability stays high and throughput improves. Clean cores and reliable hole quality for downstream processes A 53 mm nominal diameter combined with a 35 mm cutting depth produces full cores with consistent wall integrity, aiding subsequent finishing or assembly steps. The tool’s geometry focuses on efficient chip evacuation and stable guidance, which helps produce cleaner hole edges and reduces the need for rework. Consistent hole quality supports downstream processes and protects component tolerances. Built for industrial workshop conditions and predictable performance Supplied as a single unit, the tool features metric dimensions and is described as offering high durability and excellent machining performance. The carbide tip material provides wear resistance in demanding use, while the Quick IN shank supports repeatable mounting. For teams seeking a robust holemaking solution that integrates with common holders, this core drill offers a dependable balance of life and performance. Contact Metav Werkzeuge today for tailored advice and a quotation for the FEIN Ultra 35 core drill (SKU 4149702153NW); our Emmerich-based consultants will recommend the best setup for each workshop Technical data Article number: 4149702153NW Type: Ultra 35 Product: Core drill Manufacturer: C. & E. Fein GmbH Material: carbide-tipped (HM) Core specifications Diameter: 53 mm Overall length: 77 mm Cutting depth: 35 mm Cutting edges: 9 Shank: Quick IN 18 mm Packaging unit: 1 Features & design Quick IN shank 18 mm Carbide-tipped (HM) Metric dimensions High service life and excellent machining performance FAQ What is the nominal diameter and cutting depth of the tool? The FEIN Ultra 35 core drill has a nominal diameter of 53 mm and a cutting depth of 35 mm. Which shank type does the core drill use? The tool uses a Quick IN 18 mm shank for fast and secure mounting. How many cutting edges does the drill have? The cutter features 9 cutting edges to ensure steady cutting action and improved chip control. Is the tool carbide-tipped? Yes, the FEIN Ultra 35 is carbide-tipped (HM), designed for extended wear resistance. What is the article number for ordering or reference? The SKU for this core drill is 4149702153NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35 With Solid Carbide Tips, Quick IN Shank 18mm, 35mm Cut Depth - C. & E. Fein GmbH
Product data inconsistent: the manufacturer 'C. & E. Fein GmbH' is not included in the provided manufacturer overview. Please verify and correct the product information to ensure accuracy and consistency within the database. It is important to cross-check the manufacturer details against the official records or authorised sources to confirm their inclusion in the overview. This step is crucial to maintain the integrity of the product data and avoid potential discrepancies that could lead to errors in processing or reporting. Ensuring that all manufacturers are properly listed will help streamline operations and improve the reliability of the information being utilised.
35mm Core Drill Ultra 35, Solid Carbide Tipped Quick IN Shank 18mm, 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the carbide-tipped design and the Quick IN shank 18 mm for consistent hole quality and reduced tool changes; order directly via Metav Werkzeuge or consult the team for application advice. Ultra 35 annular cutter D 17 mm, carbide-tipped, Quick IN shank (C. & E. Fein) Ultra 35 annular cutter for fast, precise through-hole cutting in metalworking applications using magnetic drills or compatible holders. Carbide-tipped for long tool life Quick IN shank 18 mm for fast tool changes 35 mm cutting depth for deep, single-pass holes Metric dimensions for standardised machining High-performance holemaking with fewer tool changes The carbide-tipped annular cutter delivers reliable cutting performance across repeated cycles, reducing downtime and delivering consistent hole diameters. With six cutting edges, chip formation is optimised for efficient evacuation and lower cutting forces, which translates into shorter cycle times and extended service intervals. For production environments where throughput and reproducibility matter, this tool supports a measurable improvement in machining efficiency. Quick IN shank: faster set-up, improved productivity The Quick IN shank 18 mm enables rapid tool changes on compatible holders and magnetic drills, cutting non-productive time during set-up. The short, precise shank interface maintains concentricity and reduces run-out, resulting in more accurate holes and less rework. Using a standardised shank system simplifies tooling logistics and helps maintain steady workplace productivity. Designed depth and rigid construction for stable cuts With a 35 mm cutting depth and a nominal diameter of 17 mm, the cutter is suited to applications that require single-pass holemaking in structural parts and component assemblies. The total length of 77 mm combines accessibility with mechanical stability, keeping the cutting zone rigid and minimising vibration. The combination of geometry and material ensures clean hole walls and reliable engagement, even under continuous operation. Clear advantages for workshop and industrial use The tool’s metric dimensions and carbide-tipped cutting edges make it ideal for standardised production lines and mixed-workshop environments. Less frequent replacement and predictable performance contribute to a lower total cost of ownership. When process reliability and repeatability are priorities, this annular cutter supports those operational goals by reducing scrap and increasing first-pass acceptance rates. For supply availability and tailored advice on suitability for specific machines contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Ultra 35 annular cutter and compatible holders Technical data Article number: 4149702017NW Manufacturer: C. & E. Fein GmbH Product type: Annular cutter Material: Carbide-tipped Diameter: 17 mm Total length: 77 mm Cutting depth: 35 mm Shank execution: Quick IN shank 18 mm Number of cutting edges: 6 Packaging unit: 1 Facts Diameter: 17 mm Total length: 77 mm Cutting depth: 35 mm Shank size: 18 mm Cutting edges: 6 Special features Carbide-tipped for extended tool life Quick IN shank 18 mm for fast changes Metric dimensions for standard machining High wear resistance and cutting performance FAQ What types of machines are compatible with this annular cutter? The Ultra 35 annular cutter is compatible with magnetic drills and holders that accept a Quick IN shank 18 mm, enabling secure clamping and correct centring for metalworking operations. Which materials can this cutter machine effectively? Thanks to the carbide-tipped design and robust geometry, the cutter is suitable for common engineering metals; performance will depend on material hardness and cutting parameters chosen. How deep can the Ultra 35 cut in a single pass? The tool provides a 35 mm cutting depth, allowing single-pass holemaking for many structural and component tasks where that depth is sufficient. Does the cutter require special coolant or lubrication? Using an appropriate cutting fluid recommended for annular cutting improves tool life and chip evacuation; the Ultra 35 benefits from standard metalworking coolant practices to maintain performance. What accuracy can be expected from holes produced with this cutter? When used with a stable machine and correct set-up, the combination of Quick IN shank and precise geometry delivers holes with good concentricity and repeatable diameters suitable for assembly operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Core Drill Ultra 35, Solid Carbide Tipped, 35mm Cutting Depth, Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of the combination of high cutting performance, long tool life and a fast Quick IN tool-change system for reduced downtime and consistent production results. Order directly via Metav Werkzeuge or consult the team for application advice. Ultra 35 annular cutter — Kernbohrer Ultra 35 D.43mm Quick IN (Fein), carbide‑tipped core drill with 35 mm cutting depth The Ultra 35 annular cutter by Fein is a precision core drill for efficient holemaking in metal, offering a 43 mm diameter with a 35 mm cutting depth and a Quick IN shank for rapid tool changes Carbide‑tipped for long lifetime Quick IN 18 mm shank for rapid changeover Designed for 35 mm cutting depth Six cutting edges for smooth cutting Faster, cleaner holes through efficient annular cutting The annular cutter principle removes material at the periphery rather than drilling out the full core, which results in faster hole production and lower axial forces. The carbide‑tipped design combined with six cutting edges delivers high wear resistance and consistent cutting quality, so workplaces can expect fewer re‑works and less machine strain. With a 43 mm diameter and a 35 mm cutting depth, the tool is optimised for common structural and fabrication tasks where precise clearance holes are required. Technical terms: an annular cutter produces a slotted kerf and leaves a solid slug, reducing heat build‑up compared with solid twist drills. Quick IN system for reduced machine downtime The Quick IN shank (18 mm) provides fast, repeatable mounting in magnetic drills and compatible holders. This quick‑change interface reduces non‑productive time during tool swaps and simplifies tool handling in busy shops. The cutter’s 77 mm overall length and robust shank geometry ensure stable clamping, while metric dimensions make it straightforward to match with existing equipment. For production environments where cycle time matters, the combination of a rapid tool‑change system and a cutter engineered for stable cutting translates directly into higher throughput and predictable process planning. Durable construction for demanding workshop use Equipped with a carbide-tipped cutting head, the cutter is engineered to resist abrasive wear and maintain edge geometry over extended runs. The six‑edge configuration supports smoother chip formation and lowers the risk of clogging when cutting steel or other common ferrous materials. This robustness supports a predictable maintenance schedule and reduces the frequency of tool re‑grinding or replacement. The end result is a tool that contributes to steady productivity while safeguarding hole accuracy and surface finish in demanding applications. Contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich — quote SKU 4149702043NW (Ultra 35 annular cutter) for expert support and delivery information Technical data Article number: 4149702043NW Product name: Ultra 35 annular cutter D.43mm Quick IN Brand: C. & E. Fein GmbH Product type: Annular cutter Facts Diameter: 43 mm Cutting depth: 35 mm Overall length: 77 mm Number of cutting edges: 6 Shank: Quick IN 18 mm Packaging unit: 1 Special features Carbide‑tipped (HM‑bestückt) Highest service life and excellent cutting performance Metric dimensions Quick IN shank design for fast tool changes FAQ What materials is the Ultra 35 annular cutter suitable for? The Ultra 35 annular cutter with carbide tips is intended for general metalworking; its construction supports common ferrous materials and typical workshop steels with improved wear resistance. Which machine interfaces are compatible with the Quick IN shank? The 18 mm Quick IN shank is compatible with magnetic drills and holders designed for Quick IN tooling; compatibility should be verified against the machine’s clamping system before use. How does the tool achieve faster holemaking than a twist drill? By cutting only the hole’s periphery, the annular cutter reduces the volume of removed material and axial load, enabling faster feeds and cleaner chips compared with solid twist drills. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Hollow Core Drill 16mm Diameter Carbide-Tipped Quick IN Shank, 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the combination of carbide‑tipped robustness, Quick IN 18 mm shank, and a 35 mm cutting depth for efficient, reliable holemaking; order the Ultra 35 annular cutter directly via Metav Werkzeuge or consult our advisors for specification support. Ultra 35 Annular Cutter D16 Quick IN by C. & E. Fein — carbide‑tipped, 35 mm cutting depth The Ultra 35 annular cutter D16 Quick IN is a carbide‑tipped core drill engineered for fast, precise hole production in demanding workshop environments, featuring a Quick IN 18 mm shank for rapid tool changes. Carbide‑tipped for extended tool life Quick IN 18 mm shank for fast changeover 35 mm effective cutting depth Metric dimensions for standard machine fittings Durable carbide design that extends production cycles The carbide‑tipped construction delivers a marked increase in wear resistance compared with conventional high‑speed steel cutters, which translates into longer service intervals and fewer tool changes during runs. With a cutting depth of 35 mm and a nominal diameter of 16 mm, the cutter permits consistently reproducible holes with reduced thermal wear. For process planners, this reliability supports steadier cycle times and lowers the risk of unexpected downtime, while the robust tip geometry sustains cutting edges in repeated operations. Quick IN shank for seamless integration and faster uptime Fitted with a Quick IN 18 mm shank, the tool enables rapid insertion and secure seating in compatible holders, shortening changeover time and simplifying workshop logistics. Metric dimensions ensure compatibility with standard mounting systems commonly used in fabrication and maintenance shops. The reduced handling time per tool change supports higher overall equipment effectiveness (OEE) and simplifies tool management in multi‑shift operations, offering a practical efficiency gain rather than a complex retrofit. Efficient holemaking through peripheral cutting for cleaner results As an annular cutter, the tool removes material primarily from the periphery of the hole, producing a solid slug instead of machining the full core. This approach reduces the volume of swarf, lowers power requirements compared with full‑bore drilling, and yields cleaner hole edges that frequently require less secondary finishing. The total length of 77 mm provides an adequate reserve above the cutting depth for stable engagement, and the four cutting edges contribute to smooth feed characteristics and precise hole geometry. For tailored technical advice on the carbide‑tipped Ultra 35 annular cutter and to arrange prompt supply through Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4149702016NW Type: Ultra 35 Product label: Kernbohrer Ultra 35 D.16mm Quick IN FEIN Manufacturer: C. & E. Fein GmbH Facts Diameter: 16 mm Cutting depth: 35 mm Total length: 77 mm Cutting edges: 4 Special features Carbide‑tipped Quick IN shank 18 mm Metric dimensions Packaging unit: 1 Shank execution: Quick IN FAQ What is the cutting depth of the annular cutter? The cutting depth is 35 mm for the Ultra 35 annular cutter (SKU 4149702016NW), suitable for through and partial‑depth holemaking within that limit. Which shank type is supplied with this cutter? The tool is supplied with a Quick IN 18 mm shank for fast, secure connection to compatible quick‑change holders. How many cutting edges does the cutter have and what is the benefit? The cutter has four cutting edges; this geometry promotes smooth feeds and helps maintain consistent hole dimensions during continuous operation. Is the tool carbide‑tipped and what does that mean for workshop use? Yes, the Ultra 35 is carbide‑tipped, which increases wear resistance and extends service life under typical metalworking conditions, reducing the frequency of tool changes. Can the annular cutter be used in standard metric holders? Metric dimensions and the Quick IN shank make the cutter compatible with widely used metric holder systems, simplifying integration into existing tool setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Precision Core Drill 20mm Diameter, 35mm Cut Depth Quick IN Shank - C. & E. Fein GmbH
Take advantage of the combination of carbide‑tipped durability, fast tool changes with the Quick IN 18 mm shank and a practical 35 mm cutting depth for efficient, repeatable holemaking; order directly via Metav Werkzeuge or consult their specialists for application advice. Ultra 35 core drill — 20 mm, carbide‑tipped with Quick IN 18 mm shank (Fein) The Ultra 35 core drill is a carbide‑tipped industrial holemaking tool designed for precise 20 mm core holes and rapid changeovers with the Quick IN system Carbide‑tipped for extended tool life Quick IN 18 mm shank for fast changeovers 35 mm cutting depth for standard core holes Consistent machining performance for high throughput The carbide‑tipped construction delivers a predictable wear profile and higher tool life, reducing downtime and frequency of replacement. With 6 cutting edges, chip formation is optimised and cutting forces are distributed, which helps to maintain hole geometry over long production runs. This results in reliable repeatability and fewer rejected parts, supporting efficient production planning and stable process capability. Faster tooling changes and clearer process control The Quick IN 18 mm shank enables rapid tool exchange without complex adapters, shortening setup times and simplifying tool management on machines equipped for Quick IN holders. The 35 mm cutting depth specifies the maximum useful cut length of the core drill; this parameter determines the maximum workpiece thickness that can be drilled in a single pass and is essential when planning stacks or multi‑pass operations. Clear metric dimensions aid in tool selection and ensure compatibility with existing toolholders. Practical advantages for workshop and industrial use Compact overall length and the 20 mm diameter make the tool suitable for common core‑drilling tasks while keeping handling and storage straightforward. The tool is supplied with a Quick IN shank execution that supports rapid integration into existing setups. The combination of long service life and easy changeover translates into measurable cost efficiency and fewer production interruptions. Why reliable sourcing matters for precision tools Procurement through an experienced partner adds value beyond the tool itself. Metav operates as a quality filter for the European market, combining broad product range with decades of metrology and tooling expertise. This background supports confident tool selection and ensures steady supply for routine and emergency needs on the shopfloor. Secure the Ultra 35 core drill via Metav Werkzeuge to benefit from Quick IN compatibility and extended carbide life — contact Metav Werkzeuge's application specialists for tailored advice and same‑day ordering support Technical data Article number: 4149702020NW Product type: Core drill Label: Kernbohrer Ultra 35 D.20mm Quick IN FEIN Facts Diameter: 20 mm Overall length: 77 mm Cutting depth: 35 mm Cutting edges: 6 Special features Material: carbide‑tipped Shank: Quick IN shank 18 mm Metric dimensions Shank execution: Quick IN Packaging unit: 1 FAQ Is the Ultra 35 core drill compatible with Quick IN holders? The Ultra 35 core drill features a Quick IN 18 mm shank, so compatibility with Quick IN holders and chucks is ensured where the Quick IN interface is supported. What maximum hole depth can be achieved in one pass? The specified cutting depth is 35 mm, which is the maximum effective depth the tool will cut in a single pass. How many cutting edges does the tool have and what is the benefit? This core drill has 6 cutting edges, which helps to distribute cutting forces and promote consistent chip formation for stable hole quality. Is the tool suited for repetitive industrial use? With a carbide‑tipped design and Quick IN shank, the tool is intended for repeated industrial operations where fast changeovers and long tool life are priorities. What is the article number for ordering or reference? Reference the article number 4149702020NW when enquiring or ordering this core drill. Manufacturer: C. & E. Fein GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
36mm Core Drill HSS 30mm Cutting Depth Weldon Shank 19.05mm - Ruko GmbH
Benefit from the HSS construction, precise 36 mm diameter and 30 mm cutting depth for reliable hole-making in structural and sheet metal work — order the core drill directly via Metav Werkzeuge or consult our specialists for machining advice. RUKO core drill D36 mm HSS – 30 mm cutting depth with Weldon shank The RUKO core drill D36 mm is a high-performance HSS core drill designed for drilling clean, repeatable holes in steel, cast iron and non-ferrous metals for fabrication and maintenance tasks. High-performance HSS construction 36 mm diameter for precise core holes 30 mm cutting depth for clean extraction Weldon shank 19.05 mm (3/4") for secure clamping Consistent metalworking results through material and geometry The solid HSS body and the specified geometry deliver repeatable performance in demanding environments. With a nominal 36 mm diameter and a 30 mm effective cutting depth, the tool produces predictable hole sizes that simplify subsequent assembly or reaming steps. The presence of nine cutting edges ensures stable chip formation and uniform cutting forces, which reduces vibration and supports higher process reliability when used in conventional drilling rigs and portable units. Secure mounting and reduced runout for accurate holes The Weldon shank design with a 19.05 mm (3/4") flat provides a secure mechanical interface in standard Weldon holders and quick-change arbors. This form of clamping reduces axial slip and runout compared with cylindrical shanks, improving concentricity of the drilled hole. For workshops and on-site fabrication, the combination of a robust clamping standard and the tool’s mass distribution helps maintain tolerance control during longer production runs. Broad application range for versatile workshop use Engineered for general metal fabrication, the core drill is suitable for steel (including structural profiles and large plates), cast iron and various non-ferrous metals, supporting a wide spectrum of jobs from maintenance to production. The tool’s HSS composition ensures a balance of toughness and wear resistance for intermittent heavy-duty use. For procurement managers and workshop supervisors, this core drill offers a practical balance of durability and applicability across multiple material classes, reducing the need for specialised sets. Contact Metav Werkzeuge for tailored advice and to reserve the RUKO core drill for prompt delivery from our Emmerich warehouse Technical data Article number: 4000602315NW Label: Kernbohrer D.36mm HSS Schnitt-T.30mm Weldon RUKO Manufacturer: Ruko GmbH Facts Diameter: 36 mm Overall length: 63 mm Cutting depth: 30 mm Shank diameter: 19.05 mm (3/4") Number of cutting edges: 9 Special features Material: HSS Shank type: Weldon shank Suitable for steel Suitable for cast iron Suitable for non-ferrous and light metals Packaging unit: 1 FAQ What materials can be machined with this core drill? The RUKO core drill D36 mm is suitable for steel, cast iron and a range of non-ferrous and light metals as stated in the technical description. What shank system is required for use? A Weldon holder that accepts a 19.05 mm (3/4") flat is required to secure the Weldon shank and achieve the intended concentricity. How deep does the drill cut effectively? The effective cutting depth is 30 mm, which is intended for through-holes or controlled core extraction to that depth. How many cutting edges does the tool have and why does that matter? The tool has nine cutting edges, which helps distribute cutting forces, improve chip control and stabilise drilling under load. Can this core drill be used in a portable drill press on-site? Yes, the geometry and Weldon shank are compatible with common portable and bench-mounted Weldon chucks used in on-site metalwork. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
36mm Core Drill Ultra 35 HM-Fitted 35mm Cutting Depth Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of the combination of high drilling efficiency, durable carbide‑tipped construction and the secure Quick IN 18 mm shank for uninterrupted production. Order the FEIN annular cutter directly via Metav Werkzeuge or consult the Metav team for application advice. Ultra 35 annular cutter D36 mm Quick IN (FEIN) — carbide‑tipped, 35 mm cutting depth Ultra 35 is an annular cutter engineered for fast core drilling tasks in professional metalworking, offering a compact overall length and a Quick IN 18 mm shank for reliable toolholding. Carbide‑tipped for long tool life Quick IN 18 mm shank 36 mm diameter, 35 mm cutting depth Six cutting edges for smooth chips High productivity through efficient cutting geometry The carbide‑tipped design of this annular cutter delivers a clear advantage in wear resistance and sustained performance. With six cutting edges the tool produces consistent chip formation, which reduces heat build‑up and extends effective tool life. The result is a measurable increase in throughput for repeated core drilling operations while maintaining dimensional accuracy. Precise depth control and clean core holes A defined cutting depth of 35 mm combined with a compact overall length of 77 mm enables precise control over hole depth without unnecessary over‑penetration. The annular cutter removes a material ring rather than the full core, reducing spindle load and vibration; this makes centreless holes with smooth walls and facilitates downstream processes such as reaming or tapping. Secure, rapid tool changes with Quick IN shank The Quick IN 18 mm shank provides a standardised, secure interface for holders and adaptors, shortening changeover times and improving machine uptime. The shank system helps maintain concentricity during drilling, supporting repeatable hole positions across batches and contributing to consistent part quality in a production environment. Practical handling and maintenance advantages The tool’s geometry and robust carbide tip simplify regrinding intervals and maintenance routines: worn cutters can be assessed and replaced without complex procedures. Clear metric dimensions make inventory management straightforward and support seamless integration into existing tooling lists and drill rigs where Quick IN connections are used. Contact Metav Werkzeuge for precise application support and local stock information on the FEIN Ultra 35 annular cutter with Quick IN shank; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — available from our Emmerich warehouse Technical data Article number: 4149702036NW Product: Annular cutter Type: Ultra 35 Brand: C. & E. Fein GmbH SKU: 4149702036NW Dimensions & core data Diameter: 36 mm Cutting depth: 35 mm Overall length: 77 mm Shank: 18 mm Quick IN Cutting edges: 6 Special features Carbide‑tipped (HM‑tipped) Quick IN shank 18 mm Metric dimensions Designed for high tool life and excellent cutting performance FAQ What materials is this annular cutter suitable for? The FEIN Ultra 35 annular cutter is carbide‑tipped to withstand demanding drilling tasks; material compatibility depends on the workpiece and cutting parameters, so refer to Metav Werkzeuge for application‑specific recommendations. Is the Quick IN shank compatible with standard holders? The Quick IN 18 mm shank is a standardized interface; the Ultra 35 fits Quick IN tool holders and adaptors commonly used in professional drilling setups. How deep can the cutter drill in a single pass? The tool offers a cutting depth of 35 mm, which defines the effective depth achievable in one operation without additional extensions. Can the cutter be reconditioned or resharpened? The carbide‑tipped construction allows evaluation for resharpening depending on wear; routine assessment and professional reconditioning extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37mm Core Drill HSS 30mm Cutting Depth Weldon Shank - Ruko GmbH
Take advantage of high-speed-steel durability combined with a secure Weldon mounting and a focused 30 mm cutting depth for efficient core drilling in structural and plate steels; order the tool via Metav Werkzeuge or consult our specialists for application-specific advice. Core drill Ø37 mm HSS, 30 mm cutting depth – Weldon shank by RUKO The Core drill Ø37 mm HSS Weldon is a heavy-duty, short-core drill designed for reliably producing clean cores in steel, cast iron and non‑ferrous structural components Solid HSS construction for long life Weldon shank 3/4" (19.05 mm) for secure clamping 30 mm cutting depth for focused core removal Suitable for steel, cast iron and light metals High-performance drilling for demanding metalwork The HSS composition delivers cutting-edge resistance to heat and wear, making the core drill well suited to interrupted cuts and thick plate work. With Ø37 mm diameter and a 30 mm cutting depth, the tool concentrates material removal where it is needed, reducing load on the machine spindle and minimising heat build-up. The short overall length and robust flute geometry provide stable cutting conditions, while the 9 cutting edges contribute to balanced chip evacuation and consistent hole quality. This results in fewer re‑works and improved cycle reliability for production and repair tasks. Secure mounting and accurate repeatability Equipped with a Weldon shank 3/4", the core drill locks rigidly in standard Weldon holders, preventing slippage under torque and enabling repeatable positioning in jigs and fixtures. The 63 mm overall length and compact design reduce cantilever forces during operation, which supports improved concentricity and longer tool life. Where repeatable hole diameter and surface finish are essential, this configuration makes setup quicker and keeps downtime low, supporting efficient workshop throughput without complex fixturing. Practical workshop benefits and application scope Designed for metalworking environments, the drill is suitable for structural steel such as T‑sections and large sheets, cast iron and a range of non‑ferrous and light alloys. The combination of HSS material and precise flute geometry makes it an economical choice when compared with more complex tipped solutions for short core depths. For operations requiring robust, reliable cores — for inspection ports, bolt clearance or service access — the RUKO core drill provides a straightforward, low‑maintenance option that integrates easily into standard tooling sets and aligns with common clamping systems. For procurement or technical queries about the RUKO core drill Ø37 mm HSS with Weldon shank, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice from our Emmerich hub Technical data Article number: 4000602316NW Product: Core drill Brand: RUKO Facts Diameter: 37 mm Cutting depth: 30 mm Overall length: 63 mm Shank: Weldon 19.05 mm (3/4") Cutting edges: 9 Material: HSS Packaging unit: 1 Special features Weldon shank for secure clamping Suitable for steel (e.g. T‑profiles, large sheets) Usable on cast iron and non‑ferrous/light metals Short, robust design for reduced tool overhang FAQ Can this core drill be used on structural steel? The RUKO core drill Ø37 mm HSS (core drill, SKU 4000602316NW) is specified for steel work, including structural sections and large‑format plates. Is the shank compatible with standard Weldon holders? Yes, the RUKO core drill features a Weldon shank 19.05 mm (3/4"), which fits standard Weldon clamping systems for secure mounting. What is the effective cutting depth of this tool? The RUKO core drill offers a defined 30 mm cutting depth for controlled core removal in short‑reach applications. Is the tool suitable for non‑ferrous metals and cast iron? The RUKO core drill Ø37 mm HSS (core drill, SKU 4000602316NW) is designed for cast iron and various non‑ferrous and light metals in addition to steel. How many cutting edges does the drill have and why does that matter? This core drill has 9 cutting edges; the configuration supports balanced cutting forces and improved chip evacuation for consistent holes. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
![HSS-Bohrer, Bohrer für hammer drill, Fräserbohrer, Metallschneidebohrer, Spiralfalz]]} }``` Sorry the answer was partially garbled. Here's a clean version:]} Let's fix._json to ensure proper format. Here's the correct response: {](https://cdn.metav-shop.de/media/ba/e9/1b/1784730263/12244_e5e2c99ba254c34d6443a406f59dc6f6_all-4149702037NW.jpg?ts=1784730265 "37mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 35mm Cut Depth - C. & E. Fein GmbH")
37mm Core Drill Ultra 35 HM-Tipped Quick IN Shank 35mm Cut Depth - C. & E. Fein GmbH
Take advantage of the carbide-tipped construction and the Quick IN 18 mm shank for fast tool changes and extended service life; the combination of a 37 mm diameter and a 35 mm cutting depth delivers consistent core drilling performance. Order directly via Metav Werkzeuge or contact their specialists for technical clarification and supply options. Core drill Ultra 35 – 37 mm, Quick IN shank by C. & E. Fein The Ultra 35 is a precision core drill designed for efficient 35 mm depth cutting with a Quick IN 18 mm shank for rapid tool changes in professional workshop environments. Carbide-tipped for long service life Quick IN 18 mm shank for rapid change 35 mm cutting depth for standard core drilling Consistent performance and extended tool life The carbide-tipped design provides high wear resistance, which translates into extended stand time and fewer tool changes during batch work. The geometry and number of flutes support continuous chip evacuation, reducing rework and machine downtime. This results in a more predictable production flow and lower total cost of ownership where repeatable core holes are required for assembly or component passage. Faster setup, safer operation The Quick IN shank 18 mm allows rapid clamping and release in compatible holders, cutting preparatory time at the machine and minimising non-productive periods. The 6-flute configuration contributes to stable drilling and balanced cutting forces, which improves hole quality and reduces the need for secondary finishing. In practice, this means faster throughput and fewer interruptions for resharpening or replacement. Practical dimensions and workshop compatibility With a 37 mm diameter, 35 mm cutting depth and total length of 77 mm, the tool fits common core-drilling setups and standard metric holders. Metric dimensions ensure straightforward integration into existing tool inventories and tool management systems. The compact overall length helps on small machines and confined setups while keeping the necessary cutting depth for many panel and component applications. Clear benefits for procurement and production planning Selecting a tool with carbide-tipped cutting edges and a Quick IN interface supports leaner tool handling and predictable life cycles. This core drill reduces the frequency of exchanges, simplifies inventory choices and supports consistent machining quality across shifts. For purchasers, the technical clarity of metric sizing and a compact shank format eases specification and procurement decisions. Contact Metav Werkzeuge for availability and personalised technical advice on the Ultra 35 core drill; their team can advise on holder compatibility and delivery from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: 4149702037NW Product type: Core drill Brand: C. & E. Fein GmbH Facts Diameter: 37 mm Cutting depth: 35 mm Total length: 77 mm Cutting edges: 6 Special features Carbide-tipped Quick IN shank 18 mm Metric dimensions Highest service life and excellent cutting performance Packaging unit: 1 FAQ What is the cutting depth of the core drill? The cutting depth is 35 mm for the Ultra 35 core drill (SKU 4149702037NW). Which shank type is used for this tool? The tool uses a Quick IN shank with an 18 mm diameter for rapid changes. How many cutting edges does the tool have? The core drill is manufactured with 6 cutting edges to support stable chip evacuation. What is the overall length of the tool? The total length of the tool is 77 mm. Is the drill carbide-tipped? Yes, the tool is carbide-tipped, delivering improved wear resistance and longer life. Manufacturer: C. & E. Fein GmbH / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
38mm Core Drill HSS 30mm Cut Depth Weldon Shank 3/4" - Ruko GmbH
Take advantage of a robust combination of high-speed steel construction and a secure Weldon shank for reliable holemaking in steel and non-ferrous materials; the tool’s 30 mm cutting depth and ten cutting edges support efficient chip removal and consistent bore quality. Order the core drill directly via Metav Werkzeuge or request advice from the consultants if clarification of applications is required. RUKO Core Drill Ø 38 mm — HSS, 30 mm cutting depth, Weldon shank The RUKO Core Drill Ø 38 mm HSS is a precision metal-cutting tool intended for demanding through-hole and core-drilling work in steel, cast iron and light non-ferrous alloys. High-speed steel construction 30 mm cutting depth Weldon shank 19.05 mm (3/4") Suitable for steel, cast iron and non-ferrous metals Consistent performance from high-speed steel for industrial use The solid high-speed steel (HSS) body ensures sustained cutting performance and a good balance of toughness and wear resistance, which translates into fewer tool changes on medium-duty production runs. The combination of HSS and the drill’s ten cutting edges promotes even load distribution across the cutting zone, reducing the risk of chatter and producing cleaner bores. For workshop managers looking to keep cycle times predictable, this specification supports steady drilling rates while maintaining dimensional stability. Accurate, secure clamping for repeatable holes The Weldon shank (19.05 mm / 3/4") provides positive axial and torsional locking when used with a compatible Weldon-holder or chuck, which improves repeatability across batches. The relatively compact overall length contributes to reduced overhang, limiting deflection and supporting precision in tight-tolerance applications. Where fixture space is limited or where high concentricity is required, the shank design and solid HSS construction together help to keep the bore runout low. Application range and material suitability explained Designed for machining in steel (including structural profiles and large-format sheets), cast iron and a range of non-ferrous and light metals, the tool is suitable for workshops that require flexibility across common workpiece materials. The stated 30 mm cutting depth indicates the effective axial penetration for core removal; in practice this supports through-holes and partial-depth cores in medium-thickness components. For unfamiliar terms: a Weldon shank is a short flat on the shank that the set screw of the holder engages, while HSS denotes a tool steel optimised for elevated cutting temperatures. Operational benefits and simple maintenance routine Ten cutting edges and the HSS substrate together aid efficient chip formation and evacuation, reducing heat build-up during typical cycle times and extending usable tool life under recommended cutting conditions. Maintenance is straightforward: ensure secure clamping, inspect the cutting lips for wear, and clear chips regularly to preserve cutting geometry. For procurement and production planning, the single-piece packaging means immediate stock control is simple, and the durable construction reduces the frequency of replacements compared with lower-grade alternatives. Contact Metav Werkzeuge for detailed application advice or to secure this RUKO HSS core drill with Weldon shank; technical enquiries and orders can be sent to info@metav-werkzeuge.com or made by phone on +49 2822 7131930 Technical data Article number: 4000602317NW Label: Kernbohrer D.38mm HSS Schnitt-T.30mm Weldon RUKO UID: 4000602317NW Dimensions & core data Core diameter: 38 mm Total length: 63 mm Cutting depth: 30 mm Cutting edges: 10 Shank: Weldon 19.05 mm (3/4") Material: HSS Applications & special features Suitable for steel (profiles, large sheets) Suitable for cast iron Suitable for non-ferrous and light metals Weldon shank for secure clamping Packaging unit: 1 Manufacturer: RUKO / Ruko GmbH FAQ What materials can this core drill machine? The RUKO core drill (Ø 38 mm, HSS) is suitable for machining steel, cast iron and a variety of non-ferrous and light metal alloys in workshop and industrial settings. Which toolholder fits the Weldon shank? Use a Weldon-holder or chuck designed for a 19.05 mm (3/4") Weldon shank; the flat on the shank ensures secure clamping and torsional resistance for the RUKO core drill. How deep can the drill cut effectively? The tool provides a 30 mm cutting depth, which defines its effective axial penetration for core removal in typical component thicknesses. How does the HSS material affect tool life? HSS offers a balance of hardness and toughness at elevated cutting temperatures; for the RUKO core drill this means reliable wear resistance and stable cutting performance across medium-duty cycles. Is the drill suitable for structural steel profiles and large-format sheets? Yes, the specification explicitly cites suitability for steel such as T-profiles and large-format sheets, making it appropriate for structural and fabrication workshop tasks. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
38mm Core Drill Solid Carbide 50mm Cutting Depth Quick IN Shank - Ruko GmbH
Take advantage of a combination of solid carbide durability, a 50 mm cutting depth and the time-saving Quick IN interface for reliable holemaking in hard and stainless steels — order the tool directly via Metav Werkzeuge or consult the technical team for application advice. Ruko Solid Carbide Annular Cutter D 38 mm — 50 mm cutting depth, Quick IN shank The Ruko Solid Carbide Annular Cutter D 38 mm is a high-performance core drill designed for fast, repeatable hole production in heavy-duty and stainless steels using a Quick IN 18 mm interface Solid carbide construction for high wear resistance 50 mm cutting depth for deep, efficient cuts Quick IN 18 mm shank for fast tool changes Six cutting edges for smooth hole finishing Efficient holemaking for heavy-duty fabrication The solid carbide construction delivers a clear advantage where durability and edge stability matter. As an annular cutter, the tool machines only the hole periphery, which reduces cutting forces compared with full-bore drilling and minimises material removed. The result is improved cycle times and extended tool life when working with demanding workpiece materials. With six cutting edges, the cutter produces a consistent bore with reduced vibration, meaning fewer corrective operations and a more predictable production flow. Rapid changeovers with the Quick IN 18 mm shank Equipped with a Quick IN shank (18 mm), the cutter supports fast clamping and removal in matching tool holders. This interface reduces machine downtime during tool swaps and simplifies setup in production and maintenance environments. For operations that alternate between multiple hole sizes or require frequent tool changes, the Quick IN system lowers non-productive time and contributes to smoother shift planning on the shopfloor. Cleaner holes and less rework from precise cutting geometry The peripheral cutting concept of an annular cutter yields a core rather than chips inside the hole, making subsequent handling of material easier. The combination of solid carbide tips and a well-defined cutting geometry delivers improved surface finish and hole cylindricity, which reduces the need for secondary finishing. For teams managing assembly tolerances, this translates into fewer rejects and a more stable quality output without complex machine adjustments. Built for hard and stainless steels across industries This cutter is specified for tough applications: railway rails, Hardox/Weldox 400 wear steels, structural steel, cast steel and high-chromium stainless steels (V2A, V4A). Such material compatibility makes the tool suitable for heavy fabrication, repair workshops and rail maintenance. Where corrosion-resistant or abrasion-resistant grades are common, the cutter’s carbide composition maintains edge integrity and helps preserve cutting performance across repeated cycles. For robust, industrial holemaking choose the Ruko annular cutter with 50 mm cutting depth — order via Metav Werkzeuge or request tailored application support from Metav’s experts at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000602646NW Product: Annular cutter Manufacturer: Ruko GmbH Material: Solid carbide Facts Diameter: 38 mm Overall length: 112 mm Cutting depth: 50 mm Cutting edges: 6 Shank diameter: 18 mm Applications & features Shank type: Quick IN Suitable for Hardox/Weldox 400 and railway rails Suitable for steel, cast steel and high-chromium stainless steels (V2A, V4A) Pack size: 1 FAQ What is the maximum cutting depth of this annular cutter? The Ruko Solid Carbide Annular Cutter D 38 mm (SKU 4000602646NW) has a cutting depth of 50 mm, suitable for through-holes and deep bore requirements where a single-pass depth is required. Which shank interface is required for this tool? This tool uses a Quick IN shank with an 18 mm diameter; compatibility requires a Quick IN tool holder or adaptor that accepts an 18 mm interface. What materials can be machined with this cutter? The cutter is specified for railway rails, Hardox/Weldox 400, general steel and cast steel, and high-chromium stainless steels such as V2A and V4A, making it suitable for heavy fabrication and maintenance tasks. How many cutting edges does the cutter have and what is the benefit? The cutter features six cutting edges; this geometry promotes smoother cutting action and a superior bore finish, which helps reduce secondary machining and rework. Can this cutter be used in maintenance and rail applications? Yes, the design and carbide tips make the cutter appropriate for rail repair and heavy-duty maintenance where abrasion resistance and consistent hole quality are required. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen
40mm Carbide Core Drill 50mm Cutting Depth Quick IN Shank 18mm - Ruko GmbH
Combine robust solid carbide construction with a 50 mm cutting depth and a Quick IN 18 mm shank for fast changeovers and consistent hole quality; order the tool directly via Metav Werkzeuge or ask the consultants for application advice. Annular cutter Ø40 mm – solid carbide, 50 mm cutting depth (Ruko) The Annular cutter Ø40 mm is a heavy‑duty core drill designed for efficient through‑hole cutting in rails and high‑strength steels, supplied with a Quick IN 18 mm shank for rapid tool changes Solid carbide construction for high wear resistance 50 mm cutting depth for deep boreholes Quick IN 18 mm shank for fast tool changes Designed for rails and high-strength steels High‑performance construction for consistent hole quality The annular cutter is made from solid carbide, offering elevated hardness and thermal stability that prolongs tool life under demanding conditions. The geometry with 8 cutting edges ensures smooth chip formation and reduced radial forces, which produces clean, burr‑reduced boreholes in one pass. This construction translates directly into fewer tool changes and lower rework rates, helping to keep machining cycles predictable and efficient. The combination of carbide body and optimised cutting geometry supports repeatable accuracy on heavy parts where hole integrity is critical. Faster setup and less downtime with Quick IN Equipped with a Quick IN 18 mm shank, the cutter permits rapid clamping and interchange in systems that accept the Quick IN interface, reducing non‑productive time during tool changes. The shank design contributes to secure axial transmission and concentricity, which helps maintain hole precision even when working on stacked plates or uneven workpiece surfaces. Reduced setup time and reliable tool retention enhance throughput in fabrication shops and maintenance operations where speed and repeatability are essential. Suited to demanding materials and industrial applications The cutter is intended for applications such as railway rails, Hardox/Weldox 400 and other wear‑resistant steels, general steel and cast steel, plus high‑chromium and highly alloyed stainless steels (V2A, V4A). This material scope makes the tool suitable for heavy fabrication, repair work, and structural applications where conventional drills wear quickly. Using a purpose‑built annular cutter reduces heat build‑up and the need for multiple drilling stages, delivering reliable performance on challenging substrates. Practical performance, handling and best practice With a 50 mm cutting depth and an overall length of 112 mm, the cutter is dimensioned for substantial through‑hole work without compromising rigidity. For best results, use appropriate cutting fluid and moderate feed rates to support chip evacuation and tool life; the solid‑carbide design benefits from controlled cutting conditions rather than aggressive plunge feeds. Supplied as single units, these cutters are straightforward to stock for targeted maintenance or production tasks and integrate well into workflows that favour durability and precision. Contact Metav Werkzeuge in Emmerich for tailored application advice and availability of Ruko annular cutters: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000602648NW Product: Annular cutter Ø40 mm Manufacturer: Ruko GmbH SKU label: Kernbohrer D.40mm Vollhartmetall Schnitt‑T.50mm Quick IN RUKO Facts Diameter: 40 mm Cutting depth: 50 mm Overall length: 112 mm Shank size: 18 mm (Quick IN) Cutting edges: 8 Special features Material: solid carbide Shank: Quick IN 18 mm Applications: railway rails; Hardox/Weldox 400; steel; cast steel; high‑chromium and highly alloyed stainless steels (V2A, V4A) Packaging unit: 1 FAQ What materials can this annular cutter machine? The annular cutter is designed for heavy materials including railway rails, Hardox/Weldox 400, general steel and cast steel, and high‑chromium stainless steels such as V2A and V4A; its solid‑carbide construction supports these demanding applications. Is the Quick IN shank compatible with magnetic drilling machines? Compatibility depends on the machine’s chuck or arbor system; the Quick IN 18 mm shank fits magnetic drills and arbors that accept an 18 mm Quick IN interface—verify the machine interface before use. How deep can the cutter drill in a single pass? The tool provides a 50 mm cutting depth, enabling substantial through‑hole work without intermediate operations when used with appropriate feeds and coolant. How many cutting edges does the tool have and why does that matter? The cutter features 8 cutting edges, which improve chip control and reduce cutting forces, helping to produce cleaner holes and extend tool life under tough conditions. What is the article number for ordering reference? Order reference: 4000602648NW, listed as the Ruko annular cutter Ø40 mm with Quick IN 18 mm shank. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
40mm Core Drill HSS 30mm Cutting Depth Weldon Shank - Ruko GmbH
Take advantage of a robust HSS construction and a Weldon shank for secure mounting: the combination delivers reliable, repeatable cores in steel and non‑ferrous metals while reducing downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for compatibility and delivery options. Core drill Ø40 mm HSS — 30 mm cutting depth, Weldon shank (RUKO) The Core drill Ø40 mm HSS is a compact high‑performance core bit for workshop and structural applications, designed to cut clean holes in steel, cast iron and light non‑ferrous metals. High‑speed steel construction 30 mm cutting depth for shallow cores Weldon shank 19.05 mm (3/4") for secure clamping Suitable for steel, cast iron and non‑ferrous metals Faster material removal for routine and structural work Constructed from high‑speed steel (HSS), this core tool delivers efficient chip evacuation and consistent cutting action across a range of construction and fabrication applications. The 40 mm diameter and 30 mm cutting depth are matched to common sheet and beam work where a controlled, shallow core is required; this reduces the need for secondary finishing and supports higher throughput on repetitive tasks. The HSS composition offers a balance of toughness and wear resistance, which supports longer service life under standard workshop conditions. Secure clamping and steady, concentric cuts A Weldon shank 19.05 mm (3/4") gives a positive mechanical drive and reduces slippage in set screws or holder systems, providing stability during heavy engagement. The shank format is compatible with standard Weldon holders and quick‑change adapters, ensuring concentric running and minimised run‑out for cleaner hole walls. Reduced vibration not only improves hole quality but also extends the lifetime of the tool and the machine spindle, supporting predictable process outcomes. Versatile application and straightforward integration into workflows Designed for use on steel, cast iron, and a variety of light and non‑ferrous alloys, the bit offers practical versatility for repair, installation and fabrication tasks. The available cutting edge count contributes to smooth cutting behaviour and consistent chip control when used with appropriate feed rates and lubricant or coolant. Integration into a workshop is uncomplicated: the bit mounts in common Weldon holders and is ready for standard bench drills, milling machines or portable drill rigs where a shallow core is required. For reliable supply and expert advice on suitability, order the RUKO core drill via Metav Werkzeuge — delivery from Emmerich with product guidance available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000602319NW Brand: Ruko GmbH Product type: Core drill Facts Material: HSS Diameter: 40 mm Total length: 63 mm Cutting depth: 30 mm Special features Shank: Weldon shank 19.05 mm (3/4") Number of cutting edges: 10 Packaging unit: 1 FAQ What materials can this core drill process? The RUKO core drill is suitable for steel, cast iron and a range of non‑ferrous and light metals, making it appropriate for structural and workshop applications. Which shank system is required for secure mounting? The tool uses a Weldon shank 19.05 mm (3/4"), so a Weldon holder or compatible clamping system is required for correct and secure mounting. How deep can the drill cut in a single pass? The core drill has a cutting depth of 30 mm, designed for shallow cores and through‑hole preparations where minimal secondary work is expected. Is this core drill appropriate for portable rigs and bench drills? Yes, the geometry and shank format allow use in standard bench drills, portable drill rigs and milling machines when the correct holder is fitted. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
40mm Core Drill HSS 55mm Cut Depth Weldon Shank 3/4" - Ruko GmbH
Fast, burr‑reduced holemaking is achieved by the combination of HSS construction, a 55 mm cutting depth and a robust Weldon shank 19.05 mm (3/4"); order the annular cutter directly via Metav Werkzeuge or request specialist advice from our consultants. RUKO annular cutter D40 HSS, 55 mm cutting depth, Weldon shank The RUKO annular cutter D40 HSS is a high‑performance core drill designed for efficient, burr‑minimised hole production in steel, cast iron and light non‑ferrous metals for industrial and workshop applications High-performance HSS construction 55 mm effective cutting depth Weldon shank 19.05 mm (3/4") Suitable for steel, cast iron and light metals Precision and performance for demanding holemaking The annular cutter delivers consistent, dimensional drilling where material removal must be quick and precise. Built from HSS, the tool provides a balanced combination of hardness and toughness that supports reliable cutting across a range of metals. With a 40 mm diameter and 55 mm cutting depth, the cutter removes only the material that forms the hole, reducing cycle time compared with full‑bore drilling. The geometry with ten cutting edges improves chip formation and helps produce a clean bore with minimal burrs, which reduces finishing work and increases throughput on production lines. Machine fit and practical handling for the workshop A defined Weldon shank 19.05 mm (3/4") ensures secure clamping in Weldon holders and compatible tool adaptors, giving stable running at feed and speed settings appropriate for the workpiece. The tool’s overall length of 88 mm provides a compact footprint while maintaining the necessary working reach. The combination of shank design and cutter geometry supports efficient chip evacuation and stable axial force, which is particularly valuable when working with structural steel elements such as T‑beams and large plates as well as with cast parts and light alloys. Robustness, service life and application range Manufactured for repeated use in industrial environments, the core drill benefits from the HSS material’s amenability to re‑grinding and reconditioning, enabling refurbishment rather than replacement when wear occurs. The cutter is specified for machining steel, cast iron and non‑ferrous metals, offering versatility for fabrication, maintenance and on‑site assembly tasks. Because the tool concentrates cutting action at the perimeter of the bore, thermal and mechanical loads on the workpiece are reduced, which helps to preserve component integrity and supports predictable, repeatable production results. For reliable holemaking with RUKO quality, contact Metav Werkzeuge in Emmerich for technical consultation and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000602471NW Product: Annular cutter (core drill) Manufacturer: Ruko GmbH Material: HSS Facts Diameter: 40 mm Cutting depth: 55 mm Overall length: 88 mm Cutting edges: 10 Shank diameter: 19.05 mm (3/4") Special features Weldon shank 19.05 mm (3/4") Suitable for steel, cast iron and non‑ferrous metals Ten cutting edges for efficient chip formation Compact overall length for stable clamping FAQ Which materials can be machined with this cutter? The RUKO annular cutter D40 HSS is suitable for machining steel (including structural profiles and large sheets), cast iron and a range of non‑ferrous and light metals. What is the supplied shank and which holders are compatible? The tool features a Weldon shank 19.05 mm (3/4"), compatible with standard Weldon holders and adaptors designed for that diameter. What hole size and depth does the cutter produce? The cutter produces a 40 mm bore with an effective cutting depth of 55 mm; the overall length of the tool is 88 mm. Can the cutter be re‑conditioned after wear? Constructed from HSS, the cutter can be re‑ground and re‑sharpened by a competent service provider to extend service life. How does the cutter affect finishing work on bores? The annular design and ten cutting edges promote clean bores with reduced burrs, lowering the need for subsequent finishing operations. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
45mm Core Drill HSS 30mm Cutting Depth Weldon Shank 3/4" - Ruko GmbH
Combine robust HSS construction with a 45 mm cutting diameter and a secure Weldon shank for efficient, repeatable core drilling; order directly via Metav Werkzeuge or consult their technical advisers for application-specific recommendations. RUKO Core Drill D45 mm HSS — 30 mm cutting depth, Weldon shank RUKO Core Drill D45 mm HSS is a high-performance core drill designed for industrial metalworking, suitable for machining steel, cast iron and non‑ferrous metals with a Weldon shank for secure toolholding High-speed HSS construction for durability 45 mm diameter for generous core removal 30 mm effective cutting depth Weldon shank 19.05 mm (3/4") for secure clamping Durable HSS construction for reliable metalworking performance The drill body is made from HSS, which provides a high resistance to heat and wear during interrupted cuts and heavy loads. This material choice ensures a longer service life under industrial conditions and reduces the frequency of tool changes, benefiting production continuity. Designed for use on steel, cast iron and non‑ferrous metals, the cutter geometry balances cutting action and chip evacuation to keep processes consistent and predictable. The emphasis on material selection supports precision results without sacrificing robustness. Larger diameter and defined cutting depth for efficient core removal A 45 mm diameter combined with a 30 mm cutting depth allows for substantial core extraction in a single operation, reducing secondary machining and handling times. The larger bore diameter is particularly effective when preparing holes for inserts, inspection ports or when removing material from thick plates and structural sections. The controlled cut depth limits overload and helps maintain concentricity, contributing to high‑quality hole walls and minimised rework — a clear efficiency gain in serial or one‑off metalworking tasks. Secure shank design for minimal runout and simple integration The Weldon shank with 19.05 mm (3/4") diameter ensures secure clamping in standard holders, reducing runout and vibration during heavy drilling operations. This connection is commonly available across industrial drilling rigs and milling machines, enabling straightforward integration into existing tool holdings. The combination of stable tool retention and the drill’s geometry supports precision work in demanding use cases such as drilling T‑beams and large plates, where tool stability directly affects hole accuracy and surface finish. Contact Metav Werkzeuge for tailored technical advice and to secure the RUKO core drill with Weldon shank for immediate workshop integration Technical data Article number: 4000602324NW Label: Kernbohrer D.45mm HSS Schnitt-T.30mm Weldon RUKO Material: HSS Product type: Core drill Manufacturer: Ruko GmbH Präzisionswerkzeuge Facts Diameter: 45 mm Total length: 63 mm Cutting depth: 30 mm Cutting edges: 12 Shank: Weldon 19.05 mm (3/4") Packaging unit: 1 Materials & applications Suitable for steel machining Suitable for cast iron machining Suitable for non‑ferrous and light metals Weldon shank for secure toolholding For use on structural sections and large plates FAQ Is this core drill suitable for stainless steel? The RUKO core drill D45 mm HSS is primarily specified for steel, cast iron and non‑ferrous metals; performance on stainless steel depends on the grade and cutting parameters, so testing with appropriate feeds and speeds is recommended. What machine types are compatible with the Weldon shank? The Weldon shank 19.05 mm (3/4") is compatible with standard drilling machines and milling arbors that accept Weldon holders; the secure clamping reduces runout for the RUKO core drill SKU 4000602324NW. Can the drill be reconditioned after wear? Minor edge damage can be reground by a qualified tool service, however reconditioning should follow the original geometry to retain the RUKO core drill’s performance and life expectancy. Which applications benefit most from the 30 mm cutting depth? Applications requiring shallow, precise core extraction — for example preparation for inserts or inspection ports in thick plates and T‑beams — benefit from the controlled 30 mm cutting depth of this core drill. How does chip evacuation perform with larger diameters? The geometry and flute design of the RUKO core drill support efficient chip evacuation for a 45 mm bore, helping to avoid re‑cutting of chips and maintaining hole quality under typical industrial feeds and speeds. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen
45mm Core Drill Ultra 35 HM-Tipped 35mm Cut Depth Quick IN Shank - C. & E. Fein GmbH
Benefit from a carbide-tipped construction, a 45 mm cutting diameter and a 35 mm cutting depth for efficient, repeatable holemaking; order the Ultra 35 core drill directly via Metav Werkzeuge or consult our specialists for application advice. Ultra 35 core drill D45 mm Quick IN FEIN — carbide-tipped annular cutter, 35 mm cutting depth The Ultra 35 core drill is a carbide-tipped annular cutter engineered for fast, high-wear holemaking with a Quick IN 18 mm shank, suitable for industrial drilling applications where durability and short setup times are essential. Carbide-tipped for highest wear resistance 35 mm cutting depth for through holes Quick IN 18 mm shank for fast tool changes 45 mm diameter with six cutting edges Durable carbide cutting for longer production runs This annular cutter combines a carbide-tipped cutting system with six cutting edges to deliver stable chip formation and prolonged tool life. The reinforced cutting geometry reduces the frequency of tool changes, which lowers machine downtime and increases net output per shift. For operators unfamiliar with carbide terminology: carbide-tipped means a hard-metal insert on the cutting rim that resists abrasion and maintains edge integrity under sustained load, translating into more consistent hole quality over a longer service interval. Quick IN shank for rapid clamping and precise repeatability Equipped with a Quick IN 18 mm shank, the cutter enables swift engagement and secure seating in compatible tool holders, shortening preparation times between operations. Quick shank systems focus on repeatable axial alignment and quick release, which improves positional accuracy across a batch of holes and supports lean production workflows. The design aids process reliability by simplifying tool changes and ensuring the cutter is held concentrically, which benefits both cycle time and final hole geometry. Compact dimensions suited to workshop workflows With a 45 mm diameter, 35 mm cutting depth and an overall length of 77 mm, this cutter is dimensioned for common industrial holemaking requirements while remaining easy to handle and store. The metric specifications support straightforward inventory management and clear tool selection for engineering teams. Single-unit packaging supports targeted replacement of worn cutters without excess stock, and the clear dimensional data makes integration into process documentation and tooling lists uncomplicated. Contact Metav Werkzeuge for tailored application advice on the FEIN Ultra 35 core drill and ensure reliable supply from our Emmerich facility. Technical data Article number: 4149702045NW Manufacturer: C. & E. Fein GmbH Product type: Core drill (annular cutter) Dimensions & cutting data Diameter: 45 mm Cutting depth: 35 mm Overall length: 77 mm Number of cutting edges: 6 Shank: Quick IN, 18 mm Materials & features Carbide-tipped (HM-bestückt) Metric dimensions Highest service life and excellent machining performance Packaging unit: 1 FAQ How deep can the cutter drill? The Ultra 35 core drill provides a 35 mm cutting depth with an overall length of 77 mm for stable handling and repeatable hole depth control. What shank type does it use? The cutter is fitted with a Quick IN 18 mm shank for rapid tool changes and secure seating in compatible holders. How many cutting edges are there and why does that matter? With six cutting edges, the cutter distributes cutting forces evenly for smoother chip evacuation and extended service intervals compared with fewer-edged designs. Is the tool carbide-tipped? Yes — the Ultra 35 is HM-bestückt, which means it is carbide-tipped for improved abrasion resistance and longer life under heavy use. How is the product supplied? The item is supplied as a single unit (packaging unit: 1) and is listed under SKU 4149702045NW for ordering and inventory reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Core Drill Ultra 35 HM-Tipped 35mm Cutting Depth Quick IN Shank 18mm - C. & E. Fein GmbH
Take advantage of carbide-tipped durability combined with a Quick IN 18 mm shank for fast tool changes and consistent core-drilling performance. With a 46 mm diameter and a 35 mm cutting depth, the tool delivers efficient material removal and long service life—order the product directly via Metav Werkzeuge or consult the technical team for application support. Ultra 35 annular cutter D46 mm – carbide-tipped, Quick IN shank (Fein) The Ultra 35 annular cutter D46 mm Quick IN FEIN is a precision core-drilling tool designed for industrial and workshop use, delivering high wear resistance and reproducible hole quality in demanding metalworking tasks. Carbide-tipped for long life Quick IN 18 mm shank for fast change 35 mm cutting depth, 46 mm diameter Higher productivity through robust cutting geometry The carbide-tipped design and the cutter’s six cutting edges deliver a balance of wear resistance and stable chip formation, resulting in longer tool life and fewer interruptions in the production process. The annular cutter’s geometry reduces cutting forces compared with solid drills, which lowers machine load and contributes to steadier feeds. This leads to measurable gains in throughput and predictable machining cycles for repetitive hole-making operations in a workshop environment. Rapid changeover and consistent set-up accuracy Equipped with a Quick IN 18 mm shank, the tool enables quick insertion and secure retention in compatible holders, minimising non-productive time during tool changes. The standardised shank format supports repeatable positioning, which helps maintain hole concentricity and depth control across batches. The combination of shank system and the cutter’s metric dimensions supports seamless integration into existing tool sets where fast changeover and reproducibility are priorities. Practical application and maintenance advantages With a 46 mm diameter and 35 mm cutting depth, the cutter is tailored for core-drilling operations requiring clean, burr-reduced holes. The overall length of 77 mm offers sufficient reach for typical fixture arrangements while keeping the tool rigid under load. The six cutting edges contribute to smooth cutting action and can extend the interval between resharpening operations when used under appropriate cutting conditions. Interpretation of HM-equipped tooling: the carbide tips provide the hardness necessary for durable performance in many industrial hole-making scenarios. For reliable core-drilling solutions choose the Fein Ultra 35; contact Metav Werkzeuge for specification advice and supply from Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4149702046NW Label: Kernbohrer Ultra 35 D.46mm Quick IN FEIN Product type: Annular cutter Manufacturer: C. & E. Fein GmbH Packaging unit: 1 Facts Diameter: 46 mm Cutting depth: 35 mm Overall length: 77 mm Cutting edges: 6 Shank: Quick IN, 18 mm Material: HM-equipped (carbide-tipped) Special features Highest service life and excellent cutting performance Metric dimensions Quick IN shank execution for fast changes Designed for reproducible, burr-reduced holes FAQ What is the cutting depth of the annular cutter? The Ultra 35 annular cutter offers a 35 mm cutting depth, suitable for through and partial-hole applications within that depth range. Which shank system does the cutter use and what is the size? The tool is supplied with a Quick IN 18 mm shank, enabling rapid changeover and secure clamping in compatible holders. How many cutting edges does the cutter have and why does it matter? The cutter has six cutting edges, which promote smooth chip evacuation and contribute to stable cutting behaviour and prolonged tool life. Is the tool carbide-tipped and what advantage does that provide? Yes, the cutter is HM-equipped (carbide-tipped), offering higher wear resistance and longer service intervals compared with uncoated high-speed steel equivalents. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47mm Core Drill Ultra 35 HM-Tipped 35mm Cutting Depth Quick IN Shank - C. & E. Fein GmbH
Take advantage of the combination of carbide-tipped cutting edges and a Quick IN 18 mm shank to maintain uninterrupted production and precise holemaking. The design delivers high durability and reliable 35 mm cutting depth for standard metric applications — order directly via Metav Werkzeuge or consult our specialists for application advice. Core drill Ultra 35, 47 mm — carbide-tipped core drill with Quick IN shank by FEIN Core drill Ultra 35, 47 mm provides robust drilling for through-holes and recessed applications in workshop and industrial settings, designed as a production-capable core drill for metric systems. Carbide-tipped for long service life Quick IN 18 mm shank for fast tool changes 35 mm cutting depth for standard core holes Six cutting edges for clean chips and smooth feed Faster production with durable carbide cutting geometry The carbide-tipped construction delivers a marked increase in wear resistance and a predictable lifetime under continuous use. With six cutting edges, the tool distributes cutting forces evenly, which reduces vibration and supports a steady feed rate. This results in fewer tool changes and less downtime, directly improving throughput for repetitive holemaking tasks. The carbide-tipped design is particularly advantageous where abrasive materials or intermittent heat generation would otherwise shorten tool life. Quick IN shank minimises setup time and supports machine compatibility A dedicated Quick IN 18 mm shank enables rapid insertion and secure clamping in compatible holders, accelerating changeovers on production lines or in mobile drilling rigs. The shank system is designed for repeatable seating, so positional accuracy is maintained across successive operations. For users adopting modular tooling systems, this feature simplifies logistics and reduces the time spent on spindle changes, contributing to faster overall cycle times. Precise hole quality for metric applications The tool’s 47 mm diameter and 35 mm cutting depth are matched to common metric requirements, delivering consistent hole dimensions and surface finish. The multi-edge geometry promotes effective chip formation and evacuation, which helps avoid heat buildup and scoring of the workpiece. Where hole tolerance and repeatability matter, this core drill offers a balanced compromise between material removal rate and dimensional control, especially in workshop and light industrial contexts. Built for a wide range of workshop tasks with predictable performance With an overall length of 77 mm and a focus on highest durability, the core drill suits both handheld and machine-mounted drilling where metric holemaking is required. The combination of robust body design and optimised tip geometry provides a reliable tool life curve, easing production planning and inventory control. For teams seeking to reduce unexpected tool failures, the tool’s engineered longevity supports consistent output and lowers the frequency of stoppages. Contact Metav Werkzeuge for tailored advice on selecting the Ultra 35 core drill with Quick IN shank and to confirm compatibility with existing holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4149702047NW Model: Ultra 35 Type: Core drill Brand: C. & E. Fein GmbH SKU: 4149702047NW Facts Diameter: 47 mm Cutting depth: 35 mm Overall length: 77 mm Shank: Quick IN 18 mm Cutting edges: 6 Special features Carbide-tipped Metric dimensions Highest durability and excellent machining performance Shank design: Quick IN FAQ What materials is this core drill suitable for? The core drill Ultra 35 is carbide-tipped and intended for a variety of common workshop materials; consult Metav Werkzeuge for specific material recommendations and optimal cutting parameters. How does the Quick IN 18 mm shank improve operation? The Quick IN 18 mm shank on the Ultra 35 enables fast and repeatable tool changes, reducing setup time and maintaining consistent axial positioning during production. What hole depth and diameter does this tool achieve? This core drill provides a 47 mm diameter with a 35 mm cutting depth and an overall length of 77 mm, suitable for standard metric core-drilling tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Core Drill 13mm HSS With 3/4" Weldon Shank High Wear Resistance - C. & E. Fein GmbH
Combine HSS durability with a 50 mm cutting depth and a secure 19.05 mm Weldon shank for efficient, repeatable hole production; order the annular cutter directly via Metav Werkzeuge or contact our technical advisers for clarification. NOVA 50 annular cutter (D 13 mm) — HSS core cutter with Weldon shank The NOVA 50 annular cutter is an HSS core cutting tool engineered for precise, deep-hole cutting in industrial metalworking, offering a 50 mm effective cutting depth and a 19.05 mm (3/4") Weldon shank for secure machine mounting. HSS construction for high wear resistance 50 mm cutting depth for deeper holes Weldon shank 19.05 mm (3/4") for secure clamping Precision and material performance for reliable production The annular cutter combines HSS construction with a four-edged cutting geometry to deliver consistent cutting performance and extended service intervals. The high-speed steel body is valued for its toughness and heat resistance, which helps maintain cutting edges under typical workshop loads. The four cutting edges share the load and reduce vibration, resulting in cleaner holes and prolonged tool life — a practical benefit when exact hole quality reduces rework and downtime. Secure mounting and machine compatibility that saves setup time With a Weldon shank 19.05 mm (3/4"), the tool seats positively in standard Weldon holders and compatible magnetic or machine-mounted drilling systems. This shank format ensures a rigid connection between tool and machine, reducing slippage under torque and enabling rapid changeover. For production environments where quick, reliable clamping matters, the shank design contributes directly to process stability and predictable hole tolerances. Measured dimensions for straightforward planning and integration Key dimensions are clearly specified to support process planning: a 13 mm diameter, 50 mm cutting depth and an 86 mm overall length. These metric values enable easy integration into existing tool inventories and machine setups without conversion ambiguity. The compact overall length also helps when working in confined fixtures or close to edges, while the precise diameter supports predictable fitment for subsequent assembly operations. Practical handling and expectations in daily use The tool’s Weldon shank and HSS body simplify workshop logistics: operators can expect straightforward mounting, predictable cutting behaviour and a tool that responds well to standard cutting parameters for HSS annular cutters. The construction and geometry are chosen to balance performance and longevity, reducing the frequency of tool changes and supporting a smoother production flow. Clear product specifications help maintenance planners allocate tool life and replacement stock with confidence. For reliable deep-hole cutting choose the HSS NOVA 50 annular cutter by Fein — contact Metav Werkzeuge for expert advice and fast dispatch from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4149702651NW Type: NOVA 50 Label: Kernbohrer NOVA 50 D.13mm Weldon FEIN Facts Diameter: 13 mm Cutting depth: 50 mm Overall length: 86 mm Cutting edges: 4 Special features Material: HSS Shank: Weldon shank 19.05 mm (3/4") High service life Metric dimensions Packaging unit: 1 FAQ What shank size does the annular cutter use? The annular cutter uses a Weldon shank of 19.05 mm (3/4"), suitable for Weldon holders and compatible clamping systems. What is the effective cutting depth? The tool offers a 50 mm cutting depth, enabling deeper holemaking in a single pass. How many cutting edges does this core cutter have? This design features four cutting edges, which distribute load and improve hole finish. What material is the cutter made from? Manufactured from HSS, the cutter provides good toughness and wear resistance for workshop applications. What is the SKU for ordering and stock management? The article number for ordering is 4149702651NW and the tool is listed under the NOVA 50 series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Core Drill 16mm HSS With 19.05mm Weldon Shank, 50mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of HSS construction, a 19.05 mm Weldon shank and a 50 mm cutting depth for reliable, repeatable holemaking in metalwork; order the annular cutter directly via Metav Werkzeuge or consult our specialists for matching arbors and application advice. NOVA 50 annular cutter (16 mm) by FEIN — 50 mm cutting depth, Weldon shank The NOVA 50 annular cutter is a precision core drill designed for efficient metal hole production with a 50 mm cutting depth and a 3/4" Weldon shank for secure arbor mounting High-speed steel construction for durability Weldon shank 19.05 mm (3/4") for secure clamping 50 mm cutting depth for deep bore applications Five cutting edges for efficient material removal Faster, more economical holemaking with a precision cutter The annular cutter offers a clear efficiency advantage over solid twist drills when producing clean, precise bores. Made from HSS, this cutter combines material hardness with toughness to deliver a long service life under intermittently heavy loads. The five cutting edges reduce cutting forces per tooth, improving chip evacuation and reducing strain on the drive system. As a result, cycle times are reduced and consumable costs fall, which supports a smoother production flow in small series or workshop environments. Reliable mounting and tool stability for consistent results A Weldon shank (19.05 mm / 3/4") ensures positive axial clamping in compatible arbors and drill chucks, eliminating slippage during high-torque operations. The specified shank format makes the cutter suitable for many standard arbour mounts and magnetic drill interfaces that accept Weldon clamping. The 16 mm diameter and the 86 mm total length provide a compact, well-balanced tool geometry that promotes stability and concentricity during drilling, resulting in cleaner hole surfaces and consistent diameters. Practical design that reduces rework and maintenance With a 50 mm cutting depth this core drill removes the need for multiple passes in many through-hole tasks, while the metric dimensions and familiar HSS chemistry simplify tool selection and stock keeping. The cutter’s construction targets durable service life, so less frequent replacement is needed compared with lower-grade alternatives. For maintenance, standard sharpening and inspection routines for annular cutters apply; the geometry and number of cutting edges aid predictable regrinding intervals and consistent return-to-spec performance. Who benefits and how to integrate the cutter This tool is aimed at industrial workshops, maintenance departments and specialist fabricators seeking dependable holemaking with minimal setup overhead. Its Weldon interface and HSS construction make it well suited for integration into existing hole-cutting workflows with compatible arbors and magnetic or portable drilling systems. Specifying a cutter with these core features can streamline inventory, reduce machining time per hole and improve overall throughput on repetitive drilling tasks. Contact Metav Werkzeuge for tailored advice on arbors, compatible holders and workshop matching; call +49 2822 7131930 or email info@metav-werkzeuge.com to ensure the correct fit for the intended application and to place an order. Technical data Article number: 4149702654NW Label: Kernbohrer NOVA 50 D.16mm Weldon FEIN Product type: Annular cutter Facts Diameter: 16 mm Cutting depth: 50 mm Total length: 86 mm Cutting edges: 5 Shank: 19.05 mm (3/4") Special features Material: HSS (High-speed steel) Shank execution: Weldon shank 19.05 mm (3/4") Metric dimensions High service life (long stand time) FAQ What shank size does the cutter use and which arbors fit it? The annular cutter features a 19.05 mm (3/4") Weldon shank, which fits standard Weldon arbors and chucks designed for that shank size. What is the maximum cutting depth of the tool? The tool offers a 50 mm cutting depth, allowing single-pass holemaking for many common through-hole applications. From which material is the cutter manufactured? The cutter is manufactured from HSS (high-speed steel), providing a balance of hardness and toughness for metalworking. How many cutting edges does this cutter have and what is the benefit? The cutter has five cutting edges, which improves chip removal and reduces cutting forces per edge for smoother drilling and longer tool life. Is the cutter suitable for workshop and industrial use? Yes; the NOVA 50 core drill is designed for robust workshop and industrial holemaking where reliable repeatability and a Weldon shank interface are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Core Drill 23mm Diameter HSS With 19.05mm Weldon Shank, 50mm Cut Depth - C. & E. Fein GmbH
Benefit from the combination of HSS construction and a Weldon shank for secure clamping, plus metric dimensions and a 50 mm cutting depth for consistent, repeatable 23 mm bores; order the NOVA 50 core drill directly via Metav Werkzeuge or consult our specialists if required NOVA 50 core drill D.23 mm Weldon – FEIN The NOVA 50 core drill D.23 mm is an HSS annular cutter designed for efficient metal holemaking with a 50 mm cutting depth and a 19.05 mm (3/4") Weldon shank for secure machine clamping HSS construction for high wear resistance Weldon shank 19.05 mm (3/4") for secure clamping 50 mm cutting depth for standard core holes Faster, cleaner holes with reduced material removal Annular cutters remove only the material at the hole perimeter rather than the whole core, which makes them faster and less demanding on the machine than conventional twist drills. Made from HSS, this cutter maintains sharp cutting edges under typical workshop conditions, producing clean 23 mm bores with minimal burr formation. The specified 50 mm cutting depth enables through-holes and short blind bores while keeping cycle times low, helping small-batch production and maintenance tasks run more efficiently. Secure clamping and consistent tool life for repeat operations The Weldon shank design with a diameter of 19.05 mm (3/4") provides positive axial and rotational fixation in compatible arbors and holders, reducing slippage under load. With 6 cutting edges, the geometry balances cutting performance and longevity: each revolution distributes wear, supporting a long service life in steel and general workshop steels. The combination of HSS material and robust shank design delivers predictable performance, which is essential for repeat drilling sequences and reduces rework rates in fabrication and maintenance operations. Seamless workshop integration and simple maintenance With an 86 mm overall length and metric dimensions throughout, the cutter fits standard holders and arbor systems used in many metalworking shops. The modest overall length keeps the tool rigid in retrofit setups, improving concentricity and hole quality. Handling and regrinding procedures are straightforward for trained staff: worn cutters may be reground by specialist services to restore geometry, extending tool life and lowering total cost of ownership. The single-piece packaging unit supports immediate deployment for repair jobs or integration into production lines. Choose the FEIN NOVA 50 core drill for dependable 23 mm boremaking; contact Metav Werkzeuge for technical advice or to order directly from our Emmerich warehouse Technical data Article number: 4149702661NW Type: NOVA 50 Label: Kernbohrer NOVA 50 D.23mm Weldon FEIN Manufacturer: C. & E. Fein GmbH Facts Diameter: 23 mm Cutting depth: 50 mm Overall length: 86 mm Material: HSS Number of cutting edges: 6 Shank: Weldon 19.05 mm (3/4") Packaging unit: 1 Special features HSS material Weldon shank 19.05 mm (3/4") Metric dimensions High wear resistance 50 mm cutting depth FAQ What materials is this cutter suited for? The NOVA 50 core drill is made from HSS and is designed primarily for general metalworking applications, providing reliable performance in common steels and workshop-grade materials. How is the cutter secured in the machine? Clamping is achieved via the Weldon shank (19.05 mm / 3/4"), which ensures secure fixation in appropriate arbors and holders to prevent rotation and axial movement during cutting. Can the NOVA 50 produce blind holes as well as through-holes? Yes, the specified 50 mm cutting depth allows both through-holes and short blind bores while maintaining hole quality and efficient chip evacuation. Is regrinding possible to extend tool life? Worn HSS annular cutters can often be reground by qualified tool services to restore the original geometry, helping to extend overall service life and reduce replacement frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Core Drill 27mm HSS With 19.05mm Weldon Shank, 50mm Cutting Depth - C. & E. Fein GmbH
Take advantage of the combination of HSS construction, 50 mm cutting depth and a secure Weldon shank for reliable, repeatable core drilling in metalworking environments; order the tool directly via Metav Werkzeuge or ask the Metav consultants for tailored advice. Core drill NOVA 50 – HSS core drill, 27 mm diameter with Weldon shank by C. & E. Fein A Core drill NOVA 50 designed for precise 50 mm cutting depth applications, offering a 19.05 mm (3/4") Weldon shank for stable clamping in standard holders HSS construction for high wear resistance 50 mm cutting depth for consistent core holes Weldon shank 19.05 mm (3/4") for secure clamping 27 mm diameter for precise hole sizes Consistent cutting performance that improves process reliability Manufactured from HSS, this core drill delivers a balance of toughness and wear resistance that supports steady machining cycles. The design focuses on delivering repeatable hole quality at a specified 50 mm cutting depth, reducing rework and inspection time. With a 27 mm bore dimension and a precision-ground geometry, the tool promotes accurate hole tolerances across batches. The result is a measurable improvement in production dependability and fewer interruptions during runs, which supports tighter scheduling and predictable throughput. Stable mounting and reduced runout for cleaner cores The Weldon shank profile with a diameter of 19.05 mm (3/4") provides a positive, torque-resistant connection to holders and adaptors. This secure clamping reduces axial play and runout, which in turn lowers the risk of chatter and uneven wear on the cutting edges. For workshops that demand reliable centring and consistent core extraction, the combination of shank design and robust mounting contributes to cleaner cores and extended service intervals for downstream processes. Designed for longevity and uninterrupted workshop use Built with a focus on high stand time, the cutter geometry and material choice are optimised to withstand cyclic loads typical in metalworking. The tool’s overall length of 86 mm keeps the assembly compact while providing the required engagement for through and blind hole operations within the 50 mm cutting depth. Choosing a tool that maintains edge integrity over longer runs reduces changeovers and supports higher machine utilisation, delivering clear operational advantages in busy production settings. Practical handling and integration into existing toolsets The core drill is supplied in a single unit and fits common Weldon holders, easing integration into existing tooling systems without additional adapters. Its metric dimensions make documentation and tooling planning straightforward within a standardised workshop environment. For safe handling and best results, ensure secure clamping in a suitable Weldon holder and verify concentricity before starting the operation; regular inspection of the cutting lips will indicate when reconditioning or replacement is required to preserve hole quality. For precision core drilling with the Fein NOVA 50, contact Metav Werkzeuge for tailored technical advice or to arrange procurement—our Emmerich team can advise on integration, availability and suitable holders by phone or e‑mail. Technical data Article number: 4149702665NW Label: Kernbohrer NOVA 50 D.27mm Weldon FEIN Manufacturer: C. & E. Fein GmbH Product type: Core drill Packing unit: 1 Facts Diameter: 27 mm Cutting depth: 50 mm Overall length: 86 mm Shank: 19.05 mm (3/4") Number of cutting edges: 7 Special features Material: HSS Shaft execution: Weldon shank High stand time Metric dimensions FAQ What is the cutting depth of this core drill? The core drill NOVA 50 features a 50 mm cutting depth for controlled, repeatable bore production. Which shank does the tool use and what size is it? It is supplied with a Weldon shank, diameter 19.05 mm (3/4"), ensuring positive clamping in compatible holders. Is the NOVA 50 suitable for standard Weldon holders? Yes, the NOVA 50 is designed for secure mounting in standard Weldon holders with a 19.05 mm shank interface. How long is the tool overall and how does that affect setup? The overall length is 86 mm, a compact size that eases setup and helps maintain rigidity in typical workshop fixtures. What material is the cutter made from? The cutter is manufactured from HSS, offering a balance of toughness and wear resistance for production use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com