15mm EWF Extra Widefield 15x/22 Eyepiece, 15x Magnification - Euromex
The combination of 15x magnification, a 22 mm extra-wide field and compatibility with the DZ series delivers faster inspections and fewer repositionings for routine laboratory work; order the eyepiece directly via Metav Werkzeuge or consult the technical team for application advice. EWF Extra Widefield 15x/22 Eyepiece (DZ.3015) – 15x extra-wide field eyepiece for DZ series stereomicroscopes EWF Extra Widefield 15x/22 Eyepiece for the DZ series provides a broad visual field for stereomicroscope inspection tasks, improving throughput in quality control and assembly environments Extra-wide 22 mm field of view 15x magnification for detailed inspection Compatible with DZ series stereomicroscopes Faster inspection with a larger visual field The 15x eyepiece offers a substantial increase in visible detail while the 22 mm field number significantly reduces the need to scan or reposition specimens during inspection. For production and laboratory contexts this means fewer interruptions and a more continuous workflow: the larger field permits observation of broader areas at once, so operators can detect defects or features more rapidly. The combination of magnification and field width is particularly advantageous for routine checks where efficiency and repeatability are priorities. Comfortable viewing that supports longer sessions A wide-field eyepiece reduces the frequency of refocusing and lateral head movement, which contributes to comfortable viewing during extended sessions. The eyepiece is supplied as a single unit (packaging: 1 piece), allowing straightforward replacement or upgrade of existing oculars in compatible stereomicroscopes. Improved optical ergonomics helps maintain concentration and can lower the physical strain associated with prolonged visual tasks in inspection benches and educational setups. Proven optical design and workshop readiness Manufactured with established optical standards, the eyepiece is intended for integration into DZ-series stereomicroscope systems and for professional use in laboratories and workshops. The optical characteristics support precise visual assessment and quality assurance routines, while the single-item packaging simplifies inventory management. For questions about suitability for specific instruments or application environments, Metav Werkzeuge provides technical information and sourcing support from its Emmerich facility. For procurement or technical clarification on the Euromex EWF Extra Widefield 15x/22 eyepiece (DZ.3015), contact Metav Werkzeuge for expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DZ.3015 Manufacturer: Euromex Product type: eyepiece SKU: DZ.3015 Facts Magnification: 15x Field number: 22 mm Packaged: 1 piece Special features Extra wide-field optical design For DZ series For stereomicroscopes FAQ What magnification does the eyepiece provide? The eyepiece delivers 15x magnification, suitable for fine visual inspection and component examination. What is the visible field size of the eyepiece? The eyepiece has a 22 mm field number, offering an expanded view that reduces the need for frequent specimen repositioning. Which microscopes is this eyepiece compatible with? The eyepiece is designed for the DZ series and is intended for use with compatible stereomicroscopes; compatibility with other models should be verified against eyepiece tube diameter and mounting specifications. How is the eyepiece supplied? The product is supplied as a single unit (packaging: 1 piece), allowing straightforward replacement or stock control. How should the eyepiece be maintained? Clean lenses with a soft, lint-free cloth and appropriate optical cleaner; store in a dust-free case when not in use to preserve optical quality and extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm HWF 15x/11mm Eyepiece for bScope Ø30mm Tube, 11mm Field of View - Euromex
Take advantage of reliable 15× magnification and an 11 mm field of view for precise visual inspection; the ocular fits bScope systems with a 30 mm tube for straightforward integration. Order the HWF eyepiece directly via Metav Werkzeuge or consult the Metav team for application advice. HWF 15x/11 mm Eyepiece BS.6315 – Microscope eyepiece with 15× magnification and 11 mm field HWF 15x/11 mm eyepiece for bScope microscopes, designed to deliver clear, high‑magnification observation through a Ø 30 mm tube. 15× magnification for detailed observation 11 mm field of view for broader visual context Compatible with bScope Ø 30 mm tube Compact eyepiece designation BS.6315 Improved visual detail for component inspection This eyepiece provides 15× magnification, enabling accurate inspection of fine structures and small components without additional objective changes. The 11 mm field of view balances magnification with context, reducing the need for constant repositioning and improving workflow efficiency. Optical clarity supports repeatable measurement and visual verification tasks in laboratory and workshop environments, helping to speed up quality checks and reduce inspection time. Simple integration into bScope systems for consistent results Designed for use with bScope microscopes that accept a 30 mm tube, the ocular ensures a secure mechanical fit and consistent optical alignment. The designation BS.6315 identifies this model for replacement or inventory purposes; compatibility with the bScope tube diameter means minimal setup effort and predictable imaging geometry. As a dedicated microscope eyepiece, it preserves the instrument’s overall optical path and contributes to steady imaging performance during routine examinations. Practical advantages for workshop and laboratory workflows By combining defined magnification with a stable field of view, the ocular reduces operator repositioning and supports efficient inspection cycles in production and maintenance settings. Availability through Metav’s distribution network ensures dependable stock and timely supply from Emmerich, backed by Metav’s emphasis on making high‑precision measurement tools accessible to workshops and industry alike. For further technical questions or to confirm suitability for specific applications, Metav provides direct contact options and consultation. Contact Metav Werkzeuge for application guidance on the HWF 15x/11 mm eyepiece or to request detailed specifications: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; info@metav-werkzeuge.com; +49 2822 7131930 Technical Data Article number: BS.6315 SKU: BS.6315 Product type: Microscope eyepiece Manufacturer: Euromex Facts Magnification: 15x Field of view: 11 mm Tube diameter: Ø 30 mm Special features Compatible with bScope microscope tube Ø 30 mm Designation: HWF 15x/11 mm Image available: BS.6315.jpg FAQ What magnification does this eyepiece offer? The HWF 15x/11 mm eyepiece provides 15× magnification, specified for detailed visual inspection with a clear balance between zoom and context. Which field of view is provided by the ocular? The eyepiece delivers an 11 mm field of view, allowing broader scene context during magnified observation. Is this eyepiece compatible with my bScope microscope? Yes, the ocular is designed for bScope systems that accept a Ø 30 mm tube and is supplied under the designation BS.6315. Which brand and article number should be used when ordering replacements? Order the Euromex HWF 15x/11 mm eyepiece, article number BS.6315, to ensure correct compatibility and fit. Where can technical questions and availability be checked? Technical enquiries and availability can be addressed via Metav Werkzeuge; the HWF 15x/11 mm eyepiece is listed under BS.6315 and Metav’s team can provide application guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Pair WF Eyepieces 15x Field, 15 mm Field - Euromex
Take advantage of precise visual inspection with the combination of 15x magnification and a 15 mm wide field of view, ensuring faster component checks and reduced repositioning. Order the Pair WF 15x/15 mm Eyepieces SB.6015 directly via Metav Werkzeuge or ask our consultants if needed. Pair WF 15x/15 mm Eyepieces SB.6015 — 15x magnification & 15 mm field of view by Euromex The Pair WF 15x/15 mm Eyepieces SB.6015 are wide-field eyepieces designed for stereomicroscopes, providing detailed magnification with an extended viewing area for inspection and quality control tasks Wide-field WF design, 15 mm field of view High magnification 15x for detailed observation Pair for stereo microscopes, ready to fit Euromex manufactured optical quality Faster inspections through a genuine wide field of view The wide-field design delivers a 15 mm field of view, which noticeably reduces the need to move specimens during visual inspection. This broader viewing area translates into inspection speed gains and fewer interruptions to workflow, making routine checks and assembly verification more efficient. In practical terms, a larger field lowers repositioning time and supports faster decision cycles in production and laboratory contexts, enhancing throughput without compromising visual detail. Consistent optical performance for reliable results With 15x magnification and optical construction from a recognised manufacturer, these eyepieces support repeatable measurements and visual assessments. The pair configuration ensures the stereo head receives matched optics, reducing parallax differences during binocular viewing and improving ergonomic comfort during extended use. For applications that demand reproducibility—such as component sorting, PCB inspection or small-part assembly—this optical combination yields clear, stable images that aid accurate judgement and reduce rework. Seamless integration into existing stereomicroscope setups Designed for compatibility with standard stereomicroscope eyepiece tubes, the eyepieces offer a straightforward upgrade path for workshops and labs aiming to increase inspection capability without replacing entire microscopes. The pair format maintains balance between the optical channels, supporting comfortable stereoscopic vision for prolonged tasks. For teams seeking an affordable way to enhance visual acuity and field coverage, these eyepieces provide a practical and durable option that fits into established workflows. For personalised advice and reliable supply from Metav Werkzeuge — including compatibility checks and delivery from Emmerich — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and discuss the Pair WF 15x/15 mm Eyepieces SB.6015 for precise inspection solutions Technical data Article number: SB.6015 SKU: SB.6015 Manufacturer: Euromex Core specifications Magnification: 15x Field of view: 15 mm Special features Wide-field (WF) eyepiece Supplied as a pair For stereomicroscopes FAQ What is the main advantage of a WF eyepiece over a standard eyepiece? A wide-field eyepiece like the Pair WF 15x/15 mm Eyepieces SB.6015 increases the 15 mm field of view, allowing more of the specimen to be seen at once and reducing repositioning during inspection. Are these eyepieces suitable for stereo microscopes used in assembly work? Yes, the SB.6015 pair is intended for stereomicroscopes and is well suited to assembly, inspection and quality-control tasks where binocular, three-dimensional viewing aids precision. Will fitting the pair affect measurement repeatability? Using the matched pair improves binocular consistency and reduces parallax variations, supporting more reliable visual assessments and repeatable inspection results. Is any special maintenance required for these eyepieces? Standard optical care—gentle cleaning with appropriate lens tissue and avoiding abrasive contact—keeps the SB.6015 eyepieces performing optimally without specialised maintenance procedures. Can these eyepieces be used for educational demonstrations and routine laboratory tasks? Yes, the combination of 15x magnification and a 15 mm field of view makes them versatile for educational demonstrations, routine lab inspections and light industrial quality checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm WF 15x Eyepiece with Micrometer, 15x Magnification - Euromex
Take advantage of the combination of 15x magnification, a 15 mm wide field and an integrated micrometer for faster, traceable inspection work; order directly via Metav Werkzeuge or consult the technical advisors for compatibility and application guidance. WF 15x/15 mm Eyepiece with Micrometer SB.6015-M — 15x magnification, 15 mm wide field (Euromex) The WF 15x/15 mm Eyepiece with Micrometer SB.6015-M is a wide-field microscope eyepiece with an integrated micrometer scale, designed for measurement and inspection tasks in laboratory and quality-control environments. Wide field 15 mm for larger overview 15x magnification for detailed inspection Integrated micrometer for precise measurements Precise measurement integrated into routine inspection The integrated micrometer provides a reliable, visual scale inside the eyepiece, enabling quick linear measurements during visual inspection. Combined with the 15x magnification, the scale supports measurement of small features without adding extra accessories, which reduces handling time and improves throughput. For laboratories and production inspection points, this means faster decision-making and clearer documentation of observed dimensions. Better visual context with a wide field of view A 15 mm field of view gives a noticeably broader overview compared with standard eyepieces, allowing operators to keep more of the specimen in sight while measuring. The wide-field characteristic reduces the need for repeated repositioning and minimises the risk of missing related defects. This design benefit supports efficient workflows in microscopy-based quality control and routine sample inspection. Practical integration and benefit for varied inspection tasks As a dedicated microscope eyepiece, the accessory is intended for integration into measurement routines where visual verification and simple scaling are sufficient. The combination of 15x magnification and an internal scale simplifies repeatable checks on components, PCB traces and microfabricated parts. For teams aiming to balance precision with operational speed, the eyepiece offers a compact measurement solution that complements existing optical instrumentation. For precise measurement needs or application advice regarding the SB.6015-M, contact Metav Werkzeuge for a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930; our specialists can advise on integration and order handling. Technical data Article number: SB.6015-M SKU: SB.6015-M Brand: Euromex Product type: Microscope eyepiece Label: WF 15x/15 mm Okular mit Mikrometer SB.6015-M Core specifications Magnification: 15x Field of view: 15 mm Eyepiece designation: WF (wide field) Micrometer: integrated Features WF 15x/15 mm eyepiece with micrometer Intended for measurement and inspection Image: SB.6015-M.jpg (thumbnail available) FAQ What magnification does the eyepiece offer? The eyepiece provides 15x magnification, offering enhanced detail for inspection and measurement tasks with the integrated micrometer scale. Is the micrometer scale suitable for routine quality checks? Yes, the integrated micrometer in this eyepiece is designed for routine visual measurement and rapid verification during inspection workflows. Can the eyepiece be used for documentation of measured parts? The wide-field optic and internal scale facilitate clear visual records; measured values observed through the eyepiece can be noted and referenced for traceability in inspection protocols. Which product is this and who manufactured it? This product is the WF 15x/15 mm Eyepiece with Micrometer SB.6015-M by Euromex, specified for measurement and inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm WF Eyepiece 12.5x, Ø30mm Tube - Euromex
Take advantage of a compact optical solution that combines 12.5x magnification with a 15 mm field of view in a standard Ø30 mm tube for quick integration into existing microscopes. Order the eyepiece directly via Metav Werkzeuge or consult the specialists for compatibility checks. WF 12.5x/15 mm Eyepiece IS.6212 — Widefield 12.5× Optics, Ø30 mm Tube (Euromex) WF Eyepiece IS.6212 — a widefield ocular for laboratory and educational microscopes, designed to increase visible specimen area while fitting standard 30 mm tubes. Widefield 15 mm field of view 12.5x magnification optics Standard Ø30 mm tube diameter Precision eyepiece, Euromex quality Improved inspection speed with a larger viewing area The combination of 12.5x magnification and a 15 mm field of view offers a practical balance between detail and context, enabling faster visual inspections without constantly changing objectives. The wider apparent field reduces the need for mechanical stage movements during routine tasks, which can shorten inspection cycles and increase throughput. For users who perform repetitive checks, this ocular delivers a reliable compromise between resolution and operational efficiency. Straightforward compatibility for seamless integration Built for microscopes with a standard Ø30 mm tube, this widefield eyepiece simplifies retrofitting and equipment standardisation. The standard tube diameter ensures mechanical compatibility with a broad range of trinocular and binocular heads commonly found in teaching and workshop environments. Specifying an eyepiece with a standard tube dimension reduces downtime during equipment changes and helps maintain a consistent optical setup across multiple stations. Comfortable viewing that reduces observer fatigue A widefield design noticeably enlarges the visible area through the ocular, meaning less frequent panning and smoother visual tracking of samples. The WF designation indicates an optical layout intended to maintain clarity across the field, so edge distortion is minimised and the central image remains easy to interpret. These characteristics make the eyepiece suitable for longer observation sessions in both educational demonstrations and quality-control routines. Trusted optical design for everyday laboratory use The product is supplied by Euromex and identified as IS.6212, representing a focused solution for general microscopy tasks where stable magnification and an extended field are required. The ocular is especially suitable for observational work, sample screening and instructional settings where a balance of magnification and scene overview is valued. For bespoke requirements or integration with specialised systems, further technical details are available to support decision-making. Contact Metav Werkzeuge today to confirm whether the Euromex WF 12.5x/15 mm Eyepiece IS.6212 suits existing microscope heads or to request assistance with selection; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.6212 SKU: IS.6212 Product type: microscope eyepiece Manufacturer: Euromex Specifications Magnification: 12.5x Field of view: 15 mm Tube diameter: Ø30 mm Features Widefield (WF) eyepiece For microscopes WF 12.5x/15 mm configuration Compatible with Ø30 mm tube FAQ What magnification does the eyepiece provide? The eyepiece delivers 12.5x magnification, suitable for many general laboratory and educational observation tasks. Will this ocular fit a standard binocular microscope? Yes, the eyepiece is designed for a Ø30 mm tube, which is a common standard for many binocular and trinocular microscope heads. What advantage does the 15 mm field of view offer? A 15 mm field of view increases the visible specimen area, reducing the need for stage movements and improving inspection speed and comfort. Is the eyepiece suitable for teaching environments? The balance of magnification and widefield viewing makes the eyepiece well suited to demonstrations and instructional use with standard microscope setups. How is the product identified for ordering? The eyepiece is listed as WF 12.5x/15 mm Eyepiece IS.6212 by Euromex and can be ordered using the article number IS.6212. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm WF Eyepiece 15x With Reticle, 15 mm Field - Euromex
Take advantage of the combination of a wide-field 15x view, a 15 mm field of view and an integrated reticle for faster, more reliable measurements on inspection benches; order the eyepiece directly via Metav Werkzeuge or request advice from our consultants. WF 15x/15 mm Eyepiece with Reticle SB.6015-C — Wide-field 15x measurement eyepiece by Euromex The WF 15x/15 mm eyepiece with reticle SB.6015-C is a wide-field measuring eyepiece designed to deliver a generous field of view and a built-in crosshair for precision visual measurement in laboratory and industrial microscopy Wide-field WF 15x for expanded viewing area 15 mm field of view for reduced repositioning Integrated reticle for direct measurement Faster, more reliable measurements with wide-field optics The combination of 15x magnification and a 15 mm visual field delivers a significantly larger apparent image area than standard eyepieces, which reduces the need for constant sample repositioning and shortens inspection cycles. The wide-field design improves operator efficiency in repetitive measuring tasks by keeping more of the specimen in view; this directly translates into fewer mechanical adjustments and a more continuous workflow. The integrated reticle provides an immediate visual reference for comparison and simple alignment tasks, supporting rapid decision-making at the inspection station. Designed for precise visual metrology and calibration As a dedicated measuring eyepiece, the SB.6015-C combines optical consistency with a fixed crosshair to support straightforward calibration procedures. The reticle functions as a stable reference that can be correlated with stage micrometres or digital imaging systems during setup, enabling traceable visual measurements. For quality control applications where repeatability matters, the stable optical geometry of this eyepiece minimises measurement scatter and supports reproducible results across different operators and shifts, aiding process control and documentation. Smooth integration into inspection and documentation workflows The wide-field measuring eyepiece is suitable for use in both bench-top microscopes and inspection microscopes commonly found in workshop and production environments. Its optical characteristics facilitate quicker visual inspection and easier image capture when paired with cameras or digital documentation systems, which helps shorten reporting time. By reducing the number of manual movements required during observation, the eyepiece contributes to lower operator fatigue and fewer handling errors, improving overall throughput without sacrificing measurement integrity. Technical reassurance and purchasing guidance Metav's position as a precision partner means that the SB.6015-C arrives with an expectation of fit-for-purpose performance for industrial and laboratory use; the product is specified for metrology tasks requiring clear optics and a measurement reference. If there is uncertainty about compatibility with an existing microscope tube or a need for a detailed datasheet, technical clarifications and further specifications are available on request via Metav Werkzeuge. For additional technical information, please contact info@metav-werkzeuge.com or call +49 2822 7131930. Contact Metav Werkzeuge today to discuss how the Euromex WF 15x/15 mm eyepiece SB.6015-C can be integrated into inspection routines and to request a technical datasheet or quotation from our specialists. Technical data Article number: SB.6015-C SKU: SB.6015-C Manufacturer: Euromex Product type: Microscopy eyepiece Facts Magnification: 15x Field of view: 15 mm Special features Wide-field (WF) eyepiece Integrated reticle / crosshair FAQ What magnification and field of view does this eyepiece provide? The Euromex SB.6015-C measuring eyepiece offers 15x magnification with a 15 mm field of view, designed to increase the visible area and reduce specimen repositioning. Is the reticle suitable for calibration with a stage micrometre? Yes, the integrated reticle is intended for visual reference and can be calibrated against a stage micrometre during set-up to provide traceable measurements with the SB.6015-C eyepiece. Can this eyepiece be used for industrial inspection tasks? The wide-field optics and measurement reticle make the eyepiece suitable for industrial inspection and quality control, where quick visual checks and repeatable alignment are required. Will the eyepiece work with camera documentation systems? The optical characteristics of the WF eyepiece are compatible with many documentation setups; the SB.6015-C supports easier image capture due to its wide apparent field and stable reticle reference. How can I verify compatibility with an existing microscope tube? Check the eyepiece tube diameter and optical fit in the microscope; for assistance confirming mechanical or optical compatibility with the SB.6015-C, Metav Werkzeuge can provide guidance and detailed specifications. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Widefield WF 15x/16mm Eyepiece Ø30mm Tube - Euromex
Benefit from 15x magnification and a generous 16 mm field of view for clearer observations; the Ø 30 mm tube diameter ensures straightforward compatibility with many microscope barrels. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Euromex Widefield WF 15x/16 mm eyepiece (Ø 30 mm tube) — DX.6015 The Widefield WF 15x/16 mm eyepiece DX.6015 is a precision eyepiece designed to expand the visible field for routine microscopy and inspection tasks on microscopes with a 30 mm tube. Widefield optics for larger apparent field 15x magnification for enhanced detail 16 mm field of view for easier navigation Ø 30 mm tube fits standard microscope barrels Clearer detail and faster inspection with 15x magnification The 15x magnification of this widefield eyepiece delivers noticeably finer detail than lower-power oculars, making minute structures easier to resolve during routine checks. Combined with a 16 mm field of view, operators gain a broader visible area without sacrificing resolution, which reduces the need for frequent stage movement and speeds up inspection workflows. This balance of magnification and field size supports both rapid visual screening and careful examination in one optical accessory. Simple integration with common microscope tubes Designed for a Ø 30 mm tube, this eyepiece installs quickly into most standard microscope barrels, allowing a fast upgrade path for existing instruments. The straightforward mechanical fit supports laboratories and workshops that require flexible optics without modification to the microscope stand. The compatibility of this design reduces downtime and procurement complexity, enabling a rapid return to productive measurement and observation tasks. Comfortable observation that supports longer sessions The widefield optical layout improves the apparent field and reduces peripheral image movement, which helps lower eye strain during extended viewing. A larger usable field makes it easier to track specimens and to compare features across the image, enhancing operator comfort and observational efficiency. The result is a more productive working rhythm for technicians, educators and quality-control personnel who rely on continuous inspection. Practical applications and who benefits most This eyepiece is suitable for teaching environments, quality-control benches and general laboratory use where improved situational awareness at medium magnification is required. The Widefield WF 15x/16 mm eyepiece DX.6015 is particularly useful for tasks that benefit from a balance between magnification and overview, such as sample sorting, routine component inspection and demonstration work. Its robust optical purpose makes it a pragmatic choice for workshops, training rooms and small laboratories seeking dependable performance. For tailored advice on selecting the right eyepiece or to place an order through Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support Technical Data Article number: DX.6015 Manufacturer: Euromex SKU: DX.6015 Product type: microscope eyepiece Facts Magnification: 15x Field of view: 16 mm Tube diameter: Ø 30 mm Special features Widefield WF optical design Compatible with Ø 30 mm tube microscopes Model: DX.6015 FAQ Is this eyepiece compatible with standard 30 mm microscope tubes? Yes. The Widefield WF 15x/16 mm eyepiece DX.6015 is specified for a Ø 30 mm tube and fits into standard microscope barrels designed for that diameter. What visual performance can be expected from this eyepiece? With 15x magnification and a 16 mm field of view, the eyepiece provides enhanced detail and a wider observable area, helping technicians and educators to inspect samples more efficiently. Is the eyepiece suitable for educational laboratories? Yes. Its widefield design and balanced magnification make the eyepiece well suited to teaching environments where rapid orientation and comfortable group demonstrations are important. How should the eyepiece be cleaned and maintained? Clean lenses with a soft brush or lint-free tissue and suitable optical cleaning fluid; avoid solvents on surfaces not intended for optics. Regular, gentle maintenance preserves the eyepiece's performance and longevity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15x WF Eyepiece 11 mm Field Number, bScope BS.6015 - Euromex
The combination of 15x magnification and an11 mm field number delivers a practical balance of detail and overview for routine microscopy tasks; its compact design in the bScope range ensures straightforward integration into standard observation workflows. Order the eyepiece via Metav Werkzeuge or consult the Metav team for application advice. bScope BS.6015 microscope eyepiece — 15x, WF 11 mm (Euromex) The bScope BS.6015 is a wide-field microscope eyepiece that provides 15× magnification and an 11 mm field number for clear, enlarged viewing in teaching and laboratory settings 15× magnification for detailed observation Wide field number: 11 mm for broader view bScope series by Euromex, SKU BS.6015 Better detail with dependable 15× magnification High-magnification oculars support the identification of fine structure without excessive complexity. The 15x power of this eyepiece increases the apparent size of the specimen while preserving a usable field of view, making it suitable for common laboratory tasks where higher resolution is required. The specification represents an optical increase that complements objective lenses rated for routine and advanced work. By combining magnification with a deliberate optical design, the eyepiece helps maintain image clarity and contrast for frequent inspections. Enhanced overview thanks to the 11 mm field number A larger field number (11 mm) expands the observable area through the eyepiece, reducing the need for constant stage movement and improving situational awareness when scanning slides. This wide field characteristic is particularly useful during teaching demonstrations and comparative inspections, where a broader context aids interpretation. In practical terms, the higher field number means more of the sample fits within the view at once, which streamlines workflows and reduces operator fatigue during extended observation sessions. Practical use and straightforward integration in workflows The ocular belongs to the bScope series and is intended for microscopes that accept a WF 15× eyepiece specification. Its concise optical parameters make it a predictable choice for routine microscopy, supporting reproducible visual results in day-to-day tasks. The clear specification simplifies procurement and inventory management: the magnification and field number offer immediate orientation for matching with existing objectives and laboratory procedures, helping standardise visual inspection across workstations. Quality focus and assistance for decision-makers Produced by Euromex and listed as BS.6015, this eyepiece is specified for consistent optical performance in educational and laboratory contexts. For purchasers seeking confirmation that the ocular meets particular operational needs, technical queries and additional measurement data are available on request. Metav acts as a quality filter for the European market and provides background information and advice to ensure the selected optical accessory meets production or teaching requirements. For reliable optical upgrades, choose the Euromex bScope BS.6015 via Metav Werkzeuge; contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com for tailored technical guidance and order support. Technical Data Manufacturer: Euromex Article number: BS.6015 Model series: bScope Product type: Microscope eyepiece Facts Magnification: 15x Field number: 11 mm SKU: BS.6015 Special features WF 15x/11 mm eyepiece Label: Microscope eyepiece bScope BS.6015 FAQ What magnification does this eyepiece provide? The Euromex bScope BS.6015 eyepiece provides 15x magnification, suitable for enhanced visual detail in routine laboratory and teaching applications. What does a field number of 11 mm mean in practice? A field number of 11 mm indicates the eyepiece offers a relatively wide view through the ocular, allowing more of the specimen to be seen at once and reducing the need for frequent stage adjustments when using the bScope BS.6015. Is the bScope BS.6015 suitable for teaching and demonstration work? Yes, the combination of 15x magnification and an 11 mm field number makes the eyepiece well suited to teaching environments and comparative observations where a broader visual context is beneficial. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15x WF Eyepiece 12 mm Field Number, 15x Magnification - Euromex
Take advantage of the 15x magnification and the 12 mm field number for faster, more reliable sample inspection; the wide-field design reduces the need for constant repositioning while maintaining optical clarity. Order the EcoBlue EC.6015 microscope eyepiece directly via Metav Werkzeuge or ask the consultants for compatibility details. EcoBlue EC.6015 microscope eyepiece (Euromex) — 15x WF, 12 mm EcoBlue EC.6015 is a 15x microscope eyepiece designed to expand the visible field for routine laboratory and educational microscopy. WF eyepiece 15x magnification 12 mm field number for broader view Part of the EcoBlue optical series Broader viewing for more efficient inspection The 15x magnification combined with a 12 mm field number provides a noticeably larger apparent viewing area compared with standard oculars. The field number indicates the diameter of the image circle produced by the eyepiece; in practice, a larger number means a wider field of view, which helps to see more of the specimen at once and reduces the frequency of stage movements. For inspection tasks and teaching demonstrations where observation speed matters, this optical configuration translates into fewer interruptions and a smoother workflow. Reduced eye movement, more comfortable sessions A wide-field (WF) design is intended to decrease eye travel across the image and so can lessen fatigue during prolonged use. The WF format of this ocular supports steady observation and clearer context around the central detail, which is especially advantageous for repetitive quality checks or instructional settings. The combination of an expanded visual field and moderate magnification promotes relaxed viewing without sacrificing detail, aiding concentration in longer analytical sessions. Practical integration into microscope setups As a microscope eyepiece from the EcoBlue range, the unit is intended for straightforward use with microscopes in education and routine laboratory environments. The EcoBlue series delivers a consistent optical standard that simplifies replacements and upgrades: laboratories can standardise viewing quality across multiple instruments without introducing complex adjustments. For specific optical stacks or non-standard tube dimensions, technical clarification is available to ensure the eyepiece meets the intended application. Reliable optical specification and trusted sourcing The WF 15x/12 mm specification is a clear, verifiable optical parameter suited to many common microscopy tasks, offering a pragmatic balance between magnification and field coverage. The ocular’s documented values support predictable results in daily use, aligning with a rational approach to tool selection where measurable performance is prioritised. For further technical details or confirmation of suitability, Metav provides advisory support and product information to ensure the right choice for the task. For product enquiries, compatibility checks or to request Euromex ECOBlue EC.6015 stock information, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — specialist advice is available to assist selection and supply. Technical Data Article number: EC.6015 SKU: EC.6015 Manufacturer: Euromex Product type: Microscope eyepiece Model series: EcoBlue Facts Magnification: 15x Field number: 12 mm Source: Education PDF (WF 15x/12 mm eyepiece) Special features WF (wide-field) eyepiece Part of the EcoBlue series Intended for microscopes and educational use FAQ What magnification does the eyepiece provide? The eyepiece offers 15x magnification as specified for the EcoBlue EC.6015 ocular. How does the 12 mm field number affect observation? A 12 mm field number increases the apparent field of view of the eyepiece, allowing more of the specimen to be seen at once and reducing the need for frequent stage adjustments. Is the EcoBlue EC.6015 suitable for teaching microscopes? Yes, the optical balance of 15x magnification with a wide-field design makes the EcoBlue EC.6015 well suited to educational and routine laboratory observation. Does the eyepiece require special cleaning or handling? Routine care for optical components is recommended; use appropriate lens wipes and avoid abrasive materials to preserve the eyepiece optics and coatings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15x WF Eyepiece 15 mm Field Number, WF 15x/15 mm - Euromex
Take advantage of the 15x magnification and 15 mm field number to speed up sample inspection and reduce eye strain; the combination of wide-field optics and Euromex build quality supports consistent results in routine lab and teaching environments. Order the eyepiece directly via Metav Werkzeuge or contact the consultants for compatibility advice. BioBlue.Lab BB.6015 microscope eyepiece — 15x wide-field, 15 mm field number (Euromex) A BioBlue.Lab BB.6015 microscope eyepiece designed for laboratory and educational microscopes, providing a wide observation field with stable magnification for general inspection and overview work 15x magnification for clear detail Wide-field 15 mm field number WF eyepiece for extended viewing Faster overview with wide-field optics that aid workflow The 15x magnification together with a 15 mm field number delivers a noticeably broader visual context than standard eyepieces, which speeds routine inspection and reduces the need for frequent stage repositioning. This wide-field design, described in technical literature as a WF 15x/15 mm eyepiece, offers a larger apparent field so operators gain a clearer spatial impression of the specimen. For workshops and teaching labs, that means fewer interruptions and a more efficient observation process. Clear imaging and user-friendly observation for everyday use Constructed to meet standard optical expectations from Euromex, the eyepiece combines consistent magnification with a field shape that is comfortable for continuous viewing. The optical arrangement is intended to preserve edge-to-edge clarity, so subjects remain recognisable across the whole field of view; this reduces visual fatigue during extended sessions. The eyepiece is described in product documentation as suitable for general microscopy tasks and integrates with commonly used microscope ocular tubes. Suitable for labs and teaching where fast orientation matters Ideal for education and routine laboratory work, the eyepiece supports quick sample orientation and comparative observation thanks to its generous field of view. Instructors and technicians benefit from faster demonstrations and easier group viewing, while workshop users gain time when scanning multiple parts or preparations. If further technical data or application advice is required, additional specifications and compatibility details are available on request via the provided contact channels. Contact Metav Werkzeuge for tailored advice on integrating the Euromex BioBlue.Lab BB.6015 microscope eyepiece into existing systems — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: BB.6015 Manufacturer: Euromex Model series: BioBlue.Lab Product type: microscope eyepiece Data Magnification: 15x Field number: 15 mm Eyepiece type: WF 15x/15 mm eyepiece Special features Brand: Euromex Suitable for: microscopes (microscopy accessories) Source reference: Education PDF p. 16; Life Science PDF p. 12 FAQ What does the 15 mm field number mean in practice? A larger field number indicates a wider visible area through the eyepiece; with a 15 mm field number the BB.6015 eyepiece provides a broader overview, easing sample navigation during inspection Is the BB.6015 compatible with standard laboratory microscopes? Compatibility depends on the eyepiece tube diameter of the microscope; the BB.6015 is specified as a WF 15x/15 mm eyepiece and typically fits standard ocular tubes used in educational and routine lab instruments How does 15x magnification affect daily use compared with 10x eyepieces? Higher magnification like 15x increases apparent detail while the 15 mm field number helps retain a wide overview; the result is finer detail without losing contextual visibility, useful for both teaching demonstrations and component inspection Can the eyepiece reduce observer fatigue during long sessions? The wide-field design of this eyepiece helps reduce eye movement and frequent refocusing, which contributes to lower visual strain during extended observation periods Where can additional product documentation be found? Further specifications and the original references are listed in the Education and Life Science PDFs cited in the product literature Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15x WF Eyepiece 16 mm Field Number, 15x Magnification - Euromex
Benefit from the 15x magnification and a 16 mm field number in a compact WF eyepiece that delivers a reliably wide visual field for routine observation and teaching; order directly via Metav Werkzeuge or consult our specialists for specification advice. iScope IS.6015 microscope eyepiece — WF 15x / 16 mm (Euromex) The iScope IS.6015 is a wide-field microscope eyepiece offering 15x magnification and a 16 mm field number, suitable for educational and laboratory observation with standard microscope setups Wide-field eyepiece FN 16 mm High magnification 15x for detail WF 15x/16 mm specification Category: for microscopes See more of the specimen with a true wide field The WF eyepiece design combined with 15x magnification and a 16 mm field number increases the visible specimen area at the eyepiece, reducing the need for stage movement during inspection. Technically, the specimen field diameter is obtained by dividing the field number by the objective magnification; the 16 mm field number therefore converts to a notably larger usable field than a standard eyepiece at the same power. This characteristic supports faster visual scanning and improves efficiency during routine quality checks and classroom demonstrations, delivering a measurable productivity advantage in repetitive inspection tasks. Comfortable observation that lowers visual fatigue A wide apparent field reduces eye movement and can make extended viewing sessions less tiring. The eyepiece’s optical geometry is geared towards even illumination across the field, which helps maintain consistent image perception during examinations. In practical terms, the wide-field specification means less time re-centring a specimen and steadier observation during detailed work—advantages that translate directly into improved throughput and reduced operator fatigue in busy laboratory and teaching environments. Practical fit for teaching, life science and routine lab work Classified for microscope use, this eyepiece is detailed in education and life-science references and is appropriate as an accessory for instruments that accept wide-field oculars. The iScope IS.6015 supports tasks where a broad overview and higher magnification are required simultaneously, such as rapid sample screening or classroom demonstrations where multiple students benefit from a consistently large field. For precise instrument matching, compare the eyepiece dimensions and field number with the microscope’s eyepiece tube specification to ensure mechanical and optical compatibility. Procurement confidence and supply reliability Choosing a WF eyepiece with a clear specification simplifies procurement and reduces the risk of poor fit or underperformance. Metav’s role as a precision partner emphasises accessible, tested products and dependable logistics from Emmerich, supporting workshop and laboratory continuity. The specification-led approach—15x, 16 mm, WF designation—provides a transparent basis for purchasing decisions and contributes to consistent inspection results across multiple sites or educational facilities. Contact Metav Werkzeuge for tailored advice on integrating the iScope IS.6015 into existing setups or to request the original product datasheet and sourcing details Technical Data Article number: IS.6015 SKU: IS.6015 Manufacturer: Euromex Model series: iScope Product type: Microscope eyepiece Data Magnification: 15x Field number: 16 mm WF eyepiece: WF 15x/16 mm Source: Education PDF S.24; Life Science PDF S.16 Special features Wide-field design Category: for microscopes Series: iScope FAQ What magnification and field number does this eyepiece provide? The iScope IS.6015 provides 15x magnification and a 16 mm field number, specified as WF 15x/16 mm. How does the field number affect what is seen through the eyepiece? The field number (16 mm) determines the diameter of the usable field at the eyepiece; dividing the field number by the objective magnification gives the specimen field diameter, so the larger field number yields a wider visible area. Is this eyepiece suitable for teaching and life-science applications? Yes, the eyepiece is referenced in education and life-science materials and is intended as a wide-field accessory for microscope use, supporting rapid screening and classroom observation. How can I confirm compatibility with a specific microscope? Compare the eyepiece’s WF 15x/16 mm specification and the microscope’s eyepiece tube requirements; clarification can be requested from Metav Werkzeuge if needed. Who manufactures the iScope IS.6015? The eyepiece is supplied under the Euromex designation and listed with article number IS.6015 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15x Wide Field Eyepiece 11 mm Field Number, MicroBlue - Euromex
Take advantage of the combination of 15x magnification, an 11 mm wide-field view and Euromex optical quality for clearer, faster inspection and teaching workflows; order the eyepiece via Metav Werkzeuge or consult the team for application advice. MicroBlue MB.6015 — Microscope eyepiece, wide-field 15x / 11 mm (Euromex) The MicroBlue MB.6015 is a microscope eyepiece delivering 15x magnification with an 11 mm field number, designed for wide-field observation in educational and routine laboratory applications. Wide-field optics: 15x magnification, 11 mm F.N. Precision Euromex eyepiece MB.6015 Fits typical microscope eyepiece applications Higher-detail observation with a wider view A 15x eyepiece increases image enlargement while retaining a broad apparent field, so small structures become more distinguishable without excessive loss of context. The 11 mm figure refers to the field number, an optical specification that defines the diameter of the viewable image at the eyepiece; a larger field number produces a wide-field image that lets operators scan more of the specimen at once, reducing time spent repositioning stages and improving inspection throughput. This combination supports tasks where both detail and context matter, such as routine component checks, student demonstrations and visual comparisons in quality control. Comfortable, efficient visual work for longer sessions A wide-field ocular reduces eye and neck strain by offering a more natural viewing experience: more of the sample is visible within a single look, so fewer head or slide movements are required. For repeated or extended observation periods, this ergonomic advantage translates into steadier assessments and fewer interruptions, which benefits both teaching environments and production-line inspection. The optical design in this eyepiece favours sustained clarity and ease of use, helping teams maintain pace without sacrificing observation quality. Trusted optics for consistent results and simple integration Manufactured within the MicroBlue series, the eyepiece reflects Euromex standards for educational and laboratory accessories and is referenced in the manufacturer's education documentation as a wide-field WF 15x/11 mm eyepiece (Education PDF-S. 7). Its specification provides a predictable visual field and magnification step that integrates well into standard optical setups, aiding reproducibility of observations and measurements. Where documentation or additional technical details are required to confirm fit or performance in a specific instrument, further data can be supplied to support procurement and setup decisions. Contact Metav Werkzeuge for tailored advice on the MicroBlue MB.6015 eyepiece, including compatibility checks and supply queries, via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MB.6015 SKU: MB.6015 Brand: Euromex Series: MicroBlue Product type: microscope eyepiece Core specifications Magnification: 15x Field number (F.N.): 11 mm Features Wide-field WF 15x/11 mm eyepiece Referenced in Education PDF-S. 7 Category: for microscopes FAQ What magnification does the eyepiece provide? The eyepiece offers 15x magnification; the MicroBlue MB.6015 eyepiece from Euromex increases the specimen image by fifteen times. What does the 11 mm figure mean for viewing? The 11 mm value is the field number; with the MicroBlue MB.6015 this wider field number yields a larger apparent field for less frequent specimen repositioning and faster scanning. Is the MicroBlue MB.6015 suitable for teaching laboratories? Yes, the combination of 15x magnification and an 11 mm wide view makes the eyepiece well suited to educational demonstrations and routine laboratory inspections where clear context and detail are both important. Can the eyepiece improve inspection speed on the bench? A larger field number in the MicroBlue MB.6015 reduces the need for slide movement, which contributes to quicker visual inspection cycles in production and quality-control environments. Where can further technical documentation be obtained? Additional technical details and documentation referenced in Education PDF-S. 7 are available on request; Metav Werkzeuge can supply or arrange the relevant specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15x Wide Field Eyepiece 16 mm, For Stereomicroscopes - Euromex
Data inconsistency: the supplied PDFs contain contradictory values for the eyepiece field of view, which creates significant challenges in verifying the accuracy of the technical specifications for the Euromex EduBlue ED.6015 (SKU ED.6015), as the discrepancies between the provided documents make it impossible to determine the correct information with certainty, thereby preventing a reliable confirmation of the product's features and raising concerns about the validity of the data presented, which could potentially lead to misunderstandings or incorrect assumptions about the capabilities and performance of the Euromex EduBlue ED.6015 microscope, ultimately necessitating further clarification or additional documentation to resolve the inconsistencies and ensure accurate representation of the product's specifications.
15x Wide Field Microscope Eyepiece 12 mm Field Number - Euromex
Benefit from precise 15x magnification combined with a 12 mm field number for clear, wide-field observation in laboratory and teaching settings; the eyepiece delivers consistent image quality and straightforward replacement for standard microscopes. Order the eyepiece directly via Metav Werkzeuge or consult the specialists for compatibility advice. AE.5573 Microscope Eyepiece — Wide-field, 15x magnification, 12 mm field number (Euromex) The AE.5573 microscope eyepiece provides 15x wide-field magnification for laboratory and educational microscopes, optimised for comfortable visual inspection and documentation. Wide-field eyepiece, 15x magnification Generous 12 mm field number for broad view Standard fit for educational and lab microscopes Consistent, precise magnification for reliable observation The 15x magnification offers a dependable increase in detail without forcing excessive zoom that reduces the working field. With an apparent field number of 12 mm, the ocular provides a noticeably larger field of view than narrow-field alternatives; the true viewing diameter depends on the objective in use (true field = field number ÷ objective magnification). This optical balance supports accurate visual comparisons and easier pattern recognition during inspection tasks, making it suitable for routine laboratory measurements and classroom demonstrations. Wide-field design that reduces eye strain during extended use A wide-field eyepiece gives a more expansive apparent image, which improves situational awareness at the eyepiece and helps reduce observer fatigue when conducting prolonged examinations. The ergonomic advantage of a broader view is especially useful for repetitive tasks, sample scanning and educational sessions where quick orientation is required. The optical layout prioritises even illumination across the field so that central and peripheral details remain readily visible, contributing to a more comfortable working rhythm and fewer refocusing interruptions. Compatibility and simple integration into existing microscope setups Designed as a standard replacement eyepiece for microscopes, the WF 15x/12 mm unit fits common eyepiece tubes and can be swapped in without optical reconfiguration of the instrument. The straightforward specification simplifies inventory management for labs and training facilities: one ocular type covers many routine applications. For microscopes used in teaching and light laboratory work, the combination of wide-field optics and moderate magnification delivers a practical compromise between overview and detail, ensuring efficient workflows and dependable visual results. Contact Metav Werkzeuge for expert specification advice and procurement; call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm compatibility and supply options Technical Data Article number: AE.5573 Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 15x Field number: 12 mm SKU: AE.5573 Special features Wide-field eyepiece WF 15x/12 mm Intended for microscopes Source: Education PDF, p. 13 FAQ What magnification does this eyepiece provide? The AE.5573 eyepiece provides 15x magnification, specified as a wide-field ocular for routine laboratory and teaching use. How wide is the field of view with this eyepiece? With a field number of 12 mm, the apparent field is wide; the actual field of view is calculated by dividing the field number by the objective magnification. Is this eyepiece compatible with standard microscopes? The eyepiece is designed for standard eyepiece tubes and is suitable for most educational and light-laboratory microscopes, facilitating straightforward replacement. For which applications is this eyepiece best suited? The WF 15x/12 mm eyepiece is ideal for teaching, routine inspection and general laboratory observation where a wide view and moderate magnification are required. Does the product require special maintenance? Basic optical care—gentle dusting and lens cleaning with appropriate materials—is sufficient to maintain the eyepiece’s performance over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.5mm 4x Delphi-X Observer Microscope Objective 0.13 NA, 16.5 mm Working Distance - Euromex
Take advantage of the combination of 4× magnification, numerical aperture 0.13 and a 16.5 mm working distance for reliable overview imaging and easier sample handling; order the objective directly via Metav Werkzeuge or ask our consultants for compatibility advice. Microscope objective Delphi‑X Observer DX.7304 — Euromex 4×, NA 0.13, 16.5 mm WD The Microscope objective Delphi‑X Observer DX.7304 is a 4× microscope objective designed for routine observation and overview imaging in life science and quality-control applications. 4× magnification for overview imaging 16.5 mm working distance for sample clearance Numerical aperture 0.13 for bright-field contrast Fast, reliable overview imaging with controlled resolution The 4× magnification of this objective offers a large field of view that speeds up sample scanning and reduces the number of objective changes during routine inspections. With a numerical aperture of 0.13, the lens balances resolution and depth of field, delivering clear bright-field contrast while maintaining easier focus across uneven samples. The specified working distance of 16.5 mm provides practical clearance for manipulations or larger specimen holders, so inspections and preparatory steps can be performed without constant repositioning of the sample. Optical designation and what it means for everyday use Specified as a 4×/0.13 PL‑SAFi objective in the Life Science PDF, this designation indicates a design optimised for flat-field imaging and consistent performance across the field of view. The optical correction reduces edge distortion and improves image uniformity, which is useful when documenting specimens or when using digital cameras for documentation. For laboratories and workshops that value reproducible results, the combination of a corrected field and moderate numerical aperture reduces retakes and saves time during routine workflows. Practical procurement and confidence in supply Choosing an objective with these measured parameters supports predictable imaging results in both life science and industrial microscopy contexts. Metav Werkzeuge acts as an experienced precision partner and provides transparency in supply: over 48,000 customers, a catalogue of more than 250,000 products and a warehouse in Emmerich that functions as a quality filter for the European market. For cases where additional technical data is required before purchase, Metav offers direct consultation and clear delivery pathways to ensure the objective integrates smoothly into the existing microscope setup. For compatibility checks, technical clarifications or to secure supply of the DX.7304, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss requirements and next steps. Technical Data Article number: DX.7304 SKU: DX.7304 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Facts Magnification: 4× Working distance: 16.5 mm Numerical aperture: 0.13 Special features 4×/0.13 PL‑SAFi objective (Life Science PDF) Specified working distance 16.5 mm Intended for microscopes (microscopy accessory) FAQ What imaging tasks is this objective best suited for? The Microscope objective Delphi‑X Observer DX.7304 (Euromex, DX.7304) is primarily intended for overview imaging, rapid sample inspection and applications where a wide field of view and practical working distance are required. How does the numerical aperture affect image quality with this objective? With a numerical aperture of 0.13, the DX.7304 provides a balance between contrast and depth of field, giving clearer bright-field images for uneven samples while keeping focus tolerance larger than high‑NA objectives. Is the working distance sufficient for manipulations or larger sample holders? The specified working distance of 16.5 mm for the DX.7304 allows additional clearance for manipulation and sample mounting, reducing the need for frequent repositioning during routine tasks. Where can further technical documentation for this objective be found? Technical specifications for the Delphi‑X Observer DX.7304 are referenced in the Life Science PDF; consult the document for the PL‑SAFi designation and exact optical parameters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm High-Field Wide Eyepiece Pair 15x, 16 mm Field - Euromex
Reliable optical performance and a broad viewing field make these eyepieces ideal for detailed stereomicroscope inspection; the 15x magnification and 16 mm field combine to speed up visual checks while reducing eye strain. Order the pair via Metav Werkzeuge or contact the consultancy team for compatibility advice. Pair HWF 15x/16 mm Eyepieces NZ.6015 – 15x wide-field oculars for stereomicroscopes (Euromex) The Pair HWF 15x/16 mm Eyepieces NZ.6015 is designed as wide-field oculars for stereomicroscope applications, providing enhanced visual coverage and comfortable observation during prolonged inspection tasks. 15x wide-field magnification 16 mm field of view for broad observation Designed for stereomicroscopes Optimised magnification for repeatable inspections With a 15x magnification setting, these eyepieces deliver a consistent enlargement that supports routine quality checks and component inspection. The optical design focuses on delivering a stable apparent image size across the field, which aids in repeatable measurements and visual comparisons. For operators working on assemblies or small components, the fixed magnification helps standardise visual inspections and simplifies documentation of findings. The construction emphasises optical clarity and a uniform image, reducing the need for frequent refocusing and allowing technicians to maintain throughput without sacrificing detail. Wider field of view to reduce inspection time A 16 mm field of view significantly broadens the visible area per glance, so fewer repositionings are required when scanning parts. The wide-field characteristic of these oculars supports faster surface inspection and eases the detection of defects across larger samples. Reduced panning and fewer refocus actions translate into improved process efficiency and lower operator fatigue. The wide apparent image gives a more natural viewing experience, making it easier to compare adjacent features and to maintain spatial orientation during detailed work. Designed for comfortable, uninterrupted use The HWF designation denotes a wide-field eyepiece concept that prioritises viewing comfort during extended sessions. Ergonomic optical alignment and consistent image geometry help minimise eye strain, enabling longer work periods with steady concentration. The pair configuration is supplied for stereo heads, ensuring matched optics on both viewing tubes and a coherent stereoscopic impression. Robust assembly and repeatable optical performance contribute to dependable everyday use in laboratory, inspection and educational settings where clarity and comfort are equally important. For advice on suitability, compatibility with existing microscope heads or to order the Euromex NZ.6015 pair directly from Metav Werkzeuge, please contact Metav Werkzeuge for tailored recommendations and prompt delivery. Technical data Article number: NZ.6015 SKU: NZ.6015 Brand: Euromex Product type: Microscope eyepiece Label: Paar HWF 15x/16 mm Okulare NZ.6015 Facts Magnification: 15x Field of view: 16 mm Special features Pair configuration for stereo microscopes HWF wide-field design Suited to routine inspection and laboratory use FAQ Are these eyepieces compatible with standard stereo microscope heads? The pair of HWF 15x/16 mm eyepieces NZ.6015 is intended for stereomicroscopes and fits common stereo eyepiece tubes; compatibility checks are recommended if unusual tube diameters are in use. How does the 16 mm field of view affect inspection work? A 16 mm field of view increases the visible area per glance, speeding up checks and reducing the number of repositionings during component inspection. Can the eyepieces be used for prolonged observation without discomfort? The HWF wide-field design and matched pair arrangement provide a more natural viewing experience that helps reduce eye strain during extended sessions. Is the magnification fixed or adjustable? The eyepieces provide a fixed 15x magnification; they are designed to deliver consistent enlargement for repeatable inspections and comparisons. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm WF 15x Ocular Ø30mm Tube, 15x Magnification - Euromex
Benefit from the precise combination of 15× magnification, a 16 mm field of view and a standard Ø 30 mm tube for reliable imaging; order the WF 15x/16 mm eyepiece IS.6215 directly via Metav Werkzeuge or consult our specialists for configuration advice. WF 15x/16 mm Eyepiece IS.6215 – 15× wide-field eyepiece, Ø 30 mm tube (Euromex) A WF 15x/16 mm eyepiece IS.6215 is engineered to expand the apparent field and increase image detail for routine laboratory and educational microscopy using standard 30 mm tube mounts. 15× magnification for detailed observation Wide-field 16 mm viewing field Standard Ø 30 mm tube mount Precision optics by Euromex Greater detail with defined optical performance The 15× magnification provides a measurable increase in observable detail compared with lower-power oculars, making fine structures more discernible under the microscope. With a 16 mm field of view, the eyepiece offers a wider apparent image area than standard eyepieces, which reduces the need for constant stage repositioning and accelerates inspection and documentation tasks. These quantifiable characteristics support efficient workflows in inspection, teaching and routine laboratory applications. Designed for seamless integration with existing microscopes Fitted to a Ø 30 mm tube, the eyepiece is compatible with a broad range of older and contemporary microscopes that accept this common tube diameter. The mechanical standardisation simplifies instrument setup and replacement procedures, ensuring consistent optical alignment without additional adaptors. The wide-field design is identified by the WF designation, signalling a larger apparent field that aligns with common optical standards for oculars. Comfort and productivity during extended use A larger 16 mm viewing field decreases eye movement and cognitive load during prolonged observation, which contributes to reduced fatigue for operators working on extended measurement, sorting or teaching sessions. The combination of higher magnification and wide apparent field improves subject recognition while maintaining a comfortable viewing experience, supporting steady productivity in busy laboratory and educational environments. Quality, applicability and service considerations Manufactured by Euromex, the eyepiece follows established optical conventions for microscope accessories and is supplied as model IS.6215. The straightforward specification—15×, 16 mm field, Ø 30 mm tube—makes selection transparent and verifiable for procurement and quality assurance. For additional technical clarification or suitability checks regarding specific microscope stands, Metav Werkzeuge can provide further assistance and stock information. Contact Metav Werkzeuge today to discuss compatibility, request stock information or place an order for the Euromex WF 15x/16 mm eyepiece IS.6215 from our Emmerich warehouse Technical Data Article number: IS.6215 SKU: IS.6215 Manufacturer: Euromex Product type: Microscope eyepiece Core specifications Magnification: 15× Field of view: 16 mm Tube diameter: Ø 30 mm Features & compatibility Wide-field eyepiece (WF) WF 15×/16 mm specification For microscopes with Ø 30 mm tube Label: WF 15×/16 mm eyepiece, Ø 30 mm tube, IS.6215 FAQ What magnification does this eyepiece provide? The WF 15x/16 mm eyepiece IS.6215 delivers 15× magnification, enabling closer inspection of fine details while preserving a usable field of view. Which microscopes is the eyepiece compatible with? Compatibility is determined by tube size: the Euromex WF 15x/16 mm eyepiece IS.6215 fits microscopes equipped with a Ø 30 mm tube mount. How large is the viewing field and why does that matter? The eyepiece offers a 16 mm field of view, which increases the apparent image area and reduces stage adjustments, supporting faster inspections and less eye movement. Is this eyepiece suitable for educational and routine laboratory use? Yes. The combination of 15× magnification and a wide 16 mm viewing field makes the eyepiece suitable for prolonged teaching sessions and routine laboratory work, improving comfort and throughput. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18 mm Wide Field Eyepiece WF 10x/18 mm with Pointer - Euromex
Benefit from precise optics and a wide 18 mm field number combined with 10x magnification for confident visual inspection; order the AE.5581 directly via Metav Werkzeuge or ask our consultants if needed. AE.5581 – Euromex microscope eyepiece, WF 10x/18 mm AE.5581 is a wide-field microscope eyepiece designed to expand the visible field and support clear specimen orientation in educational and laboratory microscopes. Wide-field WF 10x/18 mm eyepiece Integrated pointer for specimen orientation Optimised for enlarged field of view Suitable for microscopes and teaching use Clear observation with measurable performance The WF 10x eyepiece delivers a defined optical result by combining magnification with a large field number (18 mm); this increases the sample area seen at once and reduces the need for frequent stage movement. The optical layout is described as a wide-field eyepiece, which, in practical terms, means more of the specimen remains visible at typical magnifications. For process planning and inspection, the 18 mm field number provides a clear, quantifiable advantage: fewer repositioning steps and a faster overview, improving throughput in routine checks. Built-in pointer for fast orientation and documentation An integrated pointer simplifies marking the region of interest during demonstrations or image capture, turning every observation into a tractable step in documentation workflows. In teaching and collaborative laboratory settings the pointer aids rapid communication between operator and observer, while in inspection tasks it supports consistent reference points for repeat checks. The optical design prioritises stable image geometry so that the pointer remains accurate across the central field, enhancing reproducibility in both training and quality-control contexts. Practical integration and dependable construction The eyepiece is specified for standard microscope eyetubes and aligns with common educational and laboratory equipment categories, meaning replacement or upgrade is straightforward. The component is intended to sit reliably in routine use, offering a durable optical assembly that supports extended sessions without frequent adjustment. Its classification within microscope accessories reflects suitability for a broad range of observation tasks, from classroom demonstrations to preliminary laboratory inspection, offering a balanced mix of usability and optical quality. Contact Metav Werkzeuge for tailored advice on workshop optics and secure the AE.5581 through Metav’s specialist team in Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for precise procurement guidance Technical Data Article number: AE.5581 SKU: AE.5581 Product type: microscope eyepiece Brand: Euromex Specifications Magnification: 10x Field number: 18 mm Designation: Wide field WF 10x/18 mm with pointer Design and features Pointer: integrated pointer Application: for microscopes Category: microscope accessories (oculars) FAQ What magnification does this eyepiece provide? The AE.5581 microscope eyepiece from Euromex provides 10x magnification for standard observation tasks. What does the 18 mm field number mean in practice? An 18 mm field number indicates a wide field of view; the AE.5581 allows more of the specimen to be seen at once, reducing stage adjustments during inspection. Is there a pointer included, and how is it used? Yes, the eyepiece includes an integrated pointer; the AE.5581’s pointer is intended for rapid orientation and clear marking of features during demonstrations or documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.3mm 2x iScope Microscope Objective 0.05 NA, WD 18.3mm - Euromex
High-contrast overview imaging at low magnification, combined with a long working distance and a modest numerical aperture, makes this objective well suited to wide-field inspection and teaching environments; the 2x magnification, 18.3 mm working distance and numerical aperture 0.05 provide a reliable balance of field of view and resolution. Order the microscope objective directly via Metav Werkzeuge or consult our technical advisors for application guidance. iScope IS.7202 microscope objective — 2x, NA 0.05 (Euromex) The iScope IS.7202 is a low-power microscope objective designed for broad-field observation and educational or routine life-science applications 2x low-power objective Working distance 18.3 mm Numerical aperture 0.05 Wide-field overview with consistent sample clearance This low-magnification lens delivers a large field of view with measured optical performance that supports rapid sample orientation and overview imaging. The combination of 2x magnification and a working distance of 18.3 mm allows examination of larger specimens or preparation holders without frequent repositioning, reducing handling time. The modest numerical aperture 0.05 is optimised for overview contrast rather than fine structural detail, which makes the optic suitable for preliminary scans, specimen locating and applications where depth of field and ease of focusing are priorities. Practical optical design and condenser recommendation Specified as a 2x/0.05 PLi objective, the optical design is intended to work with standard illumination arrangements; documentation notes it is best used together with a swing-out condenser and that the lens has no coverglass correction. In practical terms, this means the lens performs optimally when samples are presented without a coverglass or when the condenser is adjusted to accommodate thicker preparations. The absence of coverglass correction should be considered when planning workflows that routinely use mounted slides with thin covers, since correction collars or alternative objectives would be preferable in those cases. Suitable environments and handling benefits Engineered for teaching labs, routine inspection and life-science overview tasks, the objective provides a dependable option for users who need fast sample orientation and robust handling characteristics. Designed by Euromex, the lens integrates into common microscope configurations used in education and routine laboratory settings. The optical properties enable straightforward alignment and fast switching between contrast techniques when used with compatible condensers, helping to streamline workflows without sacrificing clarity during low-power observation. For reliable wide-field imaging choose the Euromex iScope IS.7202 and contact Metav Werkzeuge for advice and prompt supply from Emmerich to your workshop bench Technical Data Article number: IS.7202 Manufacturer: Euromex Model series: iScope Product type: microscope objective Facts Magnification: 2x Working distance: 18.3 mm Numerical aperture: 0.05 Special features 2x/0.05 PLi objective Best used with swing-out condenser (no coverglass correction) Source: Education and Life Science product documentation FAQ Is the objective corrected for coverglass thickness? The iScope IS.7202 microscope objective from Euromex is specified with no coverglass correction, so it is intended primarily for samples without a coverglass or for use with a swing-out condenser that accommodates thicker preparations. What are the optical specifications for the iScope IS.7202? This Euromex microscope objective offers 2x magnification, a numerical aperture of 0.05 and a working distance of 18.3 mm, suitable for overview imaging and sample orientation. Which condenser is recommended for optimal performance? Product documentation recommends use with a swing-out condenser; the iScope IS.7202 performs best when the condenser geometry allows for non-coverglass-corrected optics. For which applications is this objective most suitable? The iScope IS.7202 is well matched to educational settings, routine inspections and life-science overview tasks where large field of view and generous working distance are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.9mm 4x bScope Microscope Objective 0.10 NA, WD 18.9mm - Euromex
Data error: Manufacturer information for "Euromex" is not included in the provided manufacturer list; unable to generate the required product description. Please supply a valid manufacturer entry from the given overview or provide corrected brand details to ensure accurate and comprehensive product information can be created, as the absence of this crucial data prevents the generation of a complete and reliable description that meets the necessary standards and expectations for clarity, accuracy, and usability in the intended context, highlighting the importance of including all relevant manufacturer details for successful documentation and product representation.
183mm 0.5x Stereomicroscope Attachment Lens 183 mm Working Distance, Not For S Stands - Euromex
Take advantage of the combination of a 0.5x reduction factor and a 183 mm working distance for assured handling space and an extended field of view; order the attachment lens directly via Metav Werkzeuge or contact our consultants for technical clarification. Euromex Attachment Lens NZ.8905 – 0.5x, 183 mm working distance (not for S-type stands) The Euromex Attachment Lens NZ.8905 is an accessory designed as a 0.5x front lens for stereomicroscopes, providing an extended working distance for inspection and assembly tasks while remaining unsuitable for S-type stands. 0.5x magnification for extended field of view 183 mm working distance for large specimens Designed for stereomicroscopes, easy integration Not compatible with S-type stands More room for handling and inspection The generous 183 mm working distance creates significantly more space between the lens and the specimen than standard adapters, which benefits tasks that require tooling, probe access or component manipulation. For assembly, quality control or soldering operations, the increased clearance reduces the need for repositioning and accelerates throughput by allowing hands-on work without compromising focus. The extended working distance therefore translates directly into fewer interruptions during inspection cycles and a more efficient workflow. Broader overview with stable imaging As a 0.5x attachment lens, the accessory reduces the effective magnification to deliver a wider field of view, making it simpler to locate features and inspect larger components at once. This adapter is intended to be used in combination with existing objective optics on stereomicroscopes to achieve a balanced trade-off between detail and context: large-area inspection becomes faster while retaining sufficient image quality for preliminary assessments. The optical reduction also helps operators maintain a comfortable working posture, which supports consistent inspection results over longer shifts. Practical compatibility and mounting considerations The adapter is engineered specifically for use on stereomicroscopes and integrates with standard front-mount configurations; however, it is explicitly not suitable for S-type stands, which use a different mounting geometry. The construction emphasises simple mechanical fit and optical alignment to avoid additional calibration steps. For installations where the stand type is unclear, a verification of the microscope’s front-mount interface is recommended to ensure correct fitment and to maintain optical performance. For laboratory and workshop environments seeking more working room and a larger overview, request technical advice or place an order via Metav Werkzeuge — Metav Werkzeuge GmbH is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: NZ.8905 Manufacturer: Euromex SKU: NZ.8905 Product type: Microscope attachment lens Core specifications Magnification: 0.5x Working distance: 183 mm Compatibility: for stereomicroscopes Mount restriction: not suitable for S-type stands Special features Front attachment lens, reduction 0.5x Wide field of view for overview inspections Suitable for handling and assembly tasks with increased clearance FAQ What magnification does the attachment provide? The adapter provides a 0.5x reduction, giving a wider viewing area compared with standard objective settings for the Euromex attachment lens NZ.8905. Which microscopes is this accessory suitable for? This lens is designed for use with stereomicroscopes; it attaches at the front-mount interface common to stereo heads and complements existing objectives for broader inspections. Can the NZ.8905 be used on an S-type stand? No, the NZ.8905 is not compatible with S-type stands due to differences in mounting geometry and is intended for direct front-mount use on stereomicroscope heads. How does the 183 mm working distance help in practice? A 183 mm working distance provides more room for tools and component handling, which reduces the need to reposition parts during assembly or inspection and supports safer, more efficient workflows. Is a calibration or optical realignment required after mounting this lens? The adapter is designed for straightforward mechanical integration and generally does not require additional optical realignment beyond routine focus and adjustment of the stereomicroscope’s zoom or objective settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
185mm x 145mm Stage With 50mm x 50mm X-Y Cross Table, For DZ Series - Euromex
Take advantage of a compact 185 x 145 mm working surface combined with a 50 x 50 mm X‑Y cross table to achieve repeatable, fine positional control for sample inspection; order the Euromex stage directly via Metav Werkzeuge or consult our technical team for integration advice. 185 x 145 mm object table with 50 x 50 mm X‑Y cross table for DZ series DZ.9020 — Euromex microscope stage The 185 x 145 mm object table with 50 x 50 mm X‑Y cross table for DZ series DZ.9020 is a precision stage designed to improve specimen handling and positional control for stereomicroscope workflows in inspection and laboratory environments. 185 x 145 mm working surface 50 x 50 mm X‑Y cross travel Designed for DZ‑series stereomicroscopes Stable platform for precise positioning Precise positioning for reproducible inspection results The compact work surface paired with an integrated X‑Y cross table delivers controlled, incremental movement that supports accurate sample alignment. The 50 x 50 mm X‑Y cross table refers to the travel range in the horizontal planes, enabling fine adjustments without moving the entire microscope assembly. For quality control or repetitive inspection tasks, this combination reduces setup time and increases measurement repeatability by keeping specimens within the optical field while adjustments are made. The result is a more efficient inspection sequence and fewer re‑setups between samples. Designed for stereomicroscope workflows and easy integration Engineered for use with DZ‑series stereomicroscopes, the stage offers a stable platform that integrates with typical bench setups and inspection benches. Compatibility with the DZ range simplifies selection and reduces the need for adaptors, while the 185 x 145 mm surface provides enough area for common sample holders and fixturing. The construction supports everyday laboratory routines and small production lines where reliable positioning matters; technicians benefit from straightforward alignment and quicker transition from coarse to fine adjustments. Practical handling reduces downtime and improves throughput The stage is built to be straightforward in use: the cross table mechanism allows incremental movement without disturbing the specimen orientation. This practical design shortens manipulation cycles during sorting, assembly checks, or educational demonstrations. For users new to mechanical stages, the term X‑Y cross table simply indicates independent horizontal axes for left‑right and forward‑back movement, permitting controlled navigation across the specimen. The compact footprint helps save bench space while maintaining the precision required for detailed visual inspection. Contact Metav Werkzeuge for ordering, compatibility checks and accessory recommendations for the Euromex DZ.9020 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DZ.9020 SKU: DZ.9020 Product type: microscope stage Manufacturer: Euromex Label: 185 x 145 mm Objekttisch mit 50 x 50 mm X-Y-Kreuztisch für DZ-Serie DZ.9020 Facts Working surface: 185 x 145 mm X‑Y travel: 50 x 50 mm Special features Compatibility: for DZ‑series stereomicroscopes Application: specimen positioning and inspection Compact footprint suitable for inspection benches FAQ What are the exact dimensions and travel range of the stage? The Euromex DZ.9020 offers a 185 x 145 mm working surface with an X‑Y travel of 50 x 50 mm, providing controlled horizontal movement for specimen alignment. Is the stage compatible with other stereomicroscopes? The stage is designed for the DZ‑series stereomicroscopes; compatibility with other models depends on mounting arrangements — the DZ.9020 is optimised for DZ‑series integration. How does the X‑Y cross table improve inspection workflows? An integrated X‑Y cross table enables precise lateral and longitudinal adjustments without relocating the microscope, improving repeatability and reducing handling time during inspections with the DZ.9020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm 10x Eyepiece WF, 18mm Field Number - Euromex
Take advantage of the 10x magnification and 18 mm field number for efficient sample inspection; the compact design of the EcoBlue range supports dependable routine microscopy. Order the eyepiece directly via Metav Werkzeuge or consult the Metav specialists for additional technical clarification. Euromex EcoBlue EC.6010 microscope eyepiece — 10x, 18 mm field number Euromex EcoBlue EC.6010 is a 10x microscope eyepiece delivering a wide 18 mm field number, ideal for educational and routine laboratory observation. 10x magnification for clear specimen detail Wide 18 mm field number for larger view Part of the EcoBlue series by Euromex WF eyepiece design for comfortable observation Faster sample scanning thanks to a wide field of view The 10x eyepiece provides a familiar magnification level while the 18 mm field number significantly increases the apparent viewing area compared with narrower eyepieces. For practical work, this means fewer repositionings of the slide and faster visual surveys of specimens. The technical term field number (FN) denotes the diameter of the image circle at the eyepiece in millimetres; to estimate the actual field of view at the specimen, divide the FN by the objective magnification (for example FN 18 mm with a 40x objective yields a specimen field of 0.45 mm). This calculation supports objective planning of inspection tasks and reduces guesswork during setup. Consistent performance for teaching and routine laboratories Designed within the EcoBlue line, the ocular offers consistent optics suitable for classrooms, training workshops and routine laboratory benches. The wide-field designation (WF) improves situational awareness when observing moving or extended samples, which is particularly relevant in educational demonstrations and comparative studies. The eyepiece’s straightforward specification—10x / 18 mm—makes it easy to integrate into existing optical workflows without complex recalibration, supporting efficient lesson planning and productivity in repetitive measurement tasks. Comfortable observation and dependable optical behaviour A wide apparent field reduces eye strain during prolonged sessions and shortens the time needed to locate areas of interest on a slide. The ocular is configured to present a clear, central image while preserving useful peripheral detail, which is advantageous when scanning textured specimens or coarse preparations. As part of a coherent accessory range from Euromex, this eyepiece contributes to repeatable visual results and predictable handling characteristics in everyday microscopy routines. For reliable wide-field observation, request the Euromex EcoBlue EC.6010 via Metav Werkzeuge or contact the Metav team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and order support Technical Data Article number: EC.6010 SKU: EC.6010 Product type: Microscope eyepiece Brand: Euromex Facts Magnification: 10x Field number (FN): 18 mm Special features Series: EcoBlue Designation: WF 10x/18 mm eyepiece Label: Mikroskopokular EcoBlue EC.6010 FAQ What magnification does this eyepiece provide? The eyepiece offers 10x magnification, as specified for the Euromex EcoBlue EC.6010 microscope eyepiece. What does the 18 mm field number mean in practice? The 18 mm field number is the diameter of the viewable image circle at the eyepiece; to find the specimen field of view, divide 18 by the objective magnification (for example 18 / 40 = 0.45 mm). Is the WF designation important for teaching environments? Yes, the WF (wide-field) characteristic of the EcoBlue EC.6010 provides a larger apparent view, which helps when demonstrating specimens to groups or when scanning large sample areas. Can this eyepiece be used for routine laboratory observation? The Euromex EcoBlue EC.6010 is designed for routine laboratory and educational use, offering consistent optical behaviour for day-to-day inspection tasks. How does a wider field number affect eye strain? A wider apparent field reduces the need for frequent slide repositioning and can lessen eye fatigue during extended observation sessions, improving comfort over long practical periods. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm WF 10x Eyepiece with Micrometer, 10/100 - Euromex
The combination of 10x magnification and an18 mm field number delivers consistent measuring capability with a broad viewing area, reducing the need for repeated stage adjustments and speeding up inspection tasks. Benefit from straightforward integration into measuring workflows and order via Metav Werkzeuge or request expert advice from our consultants. EcoBlue EC.6110 — 10x measuring eyepiece, 18 mm field number (Euromex) An EcoBlue EC.6110 measuring eyepiece designed for precise stage measurement and image calibration in laboratory and educational microscopes. 10x wide-field magnification 18 mm field number for broad view Integrated micrometer 10/100 Part of the EcoBlue series Precision optics for measurable results The 10x wide-field design combined with an 18 mm field number provides a clear, steady image that supports accurate measurement. A larger field number means more of the specimen is visible without moving the slide, which improves throughput in repetitive inspection tasks. The eyepiece’s optical layout reduces eye strain during prolonged use and supports consistent readings from optical measurement scales. This results in a measurable improvement in workflow efficiency for routine calibration and documentation tasks. Direct measurement capability to simplify workflows Equipped as a WF 10x/18 mm eyepiece with micrometer 10/100, the ocular allows direct visual measurement inside the eyepiece, removing one step from traditional measurement routines. The in‑eyepiece micrometer offers immediate length references that are easy to interpret alongside the microscope image, so inspections and quick dimensional checks become faster and less error‑prone. This feature is particularly useful in training environments and production quality control where speed and repeatability are priorities. Reliable build and series compatibility for everyday use As a member of the EcoBlue series from Euromex, the eyepiece is intended for dependable, everyday performance rather than experimental or bespoke applications. The compact design makes it simple to fit into standard eyepiece tubes used across many microscopes, while the measuring function turns a standard ocular into a practical inspection tool. The emphasis here is on reliable repeatability and straightforward operation, which supports technicians and educators who require trustworthy optical measuring aids without complex setup. For precise measuring tasks with the EcoBlue EC.6110, contact Metav Werkzeuge GmbH in Emmerich for tailored advice and fast supply – info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: EC.6110 SKU: EC.6110 Manufacturer: Euromex Model series: EcoBlue Product type: Measuring eyepiece (microscope eyepiece) Facts Magnification: 10x Field number: 18 mm Micrometer: 10/100 Special features Wide-field optics Measuring eyepiece design Part of EcoBlue series FAQ What magnification and field of view does this eyepiece provide? The eyepiece delivers 10x magnification with an 18 mm field number, giving a broad visible area for inspection and measurement tasks. Does the eyepiece include a micrometer for direct measurements? Yes, the WF 10x/18 mm eyepiece is supplied with a micrometer 10/100, enabling direct measurement inside the ocular for quicker checks and documentation. Which applications suit this measuring eyepiece best? The measuring eyepiece is suited to routine laboratory and educational microscopy where quick, repeatable dimensional checks are required; the EC.6110 from Euromex is designed for such everyday measurement tasks. Is the eyepiece part of a larger product family? The EC.6110 belongs to the EcoBlue series, which focuses on practical, reliable optics for regular use rather than specialist custom optics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com