15.5mm Plan PLMi 5x/0.12 IOS Infinite-Corrected Objective No Cover Glass Correction - Euromex
Benefit from the combination of Plan-corrected optics, 5× magnification and a 15.5 mm working distance for consistent, repeatable imaging in routine and educational settings. Order the Euromex IS.8105 directly via Metav Werkzeuge or ask our consultants for advice on system compatibility. Plan PLMi 5x/0.12 IOS objective — Euromex microscope objective with 5× magnification and 15.5 mm working distance The Plan PLMi 5x/0.12 IOS objective is an infinity-corrected microscope objective engineered for flat-field imaging where a moderate magnification and an extended working distance are required Plan-corrected optics for flat images 5× magnification, NA 0.12 Infinity-corrected optical design Working distance 15.5 mm, no cover-glass correction Improved image uniformity for inspections and documentation This objective delivers a noticeably flatter image field compared with standard lenses, which reduces edge curvature and eases image stitching and measurement tasks. The Plan-corrected optics ensure that detail remains sharp across the field of view, a practical advantage for routine inspections, sample documentation and teaching demonstrations. The moderate 5× power balances resolution and field of view, so features are easier to locate and measure without frequent stage adjustments. The design supports efficient workflows by lowering the need for post-capture correction and by improving the reliability of visual comparison and image analysis. Practical optical design and what the specifications mean The lens is infinity-corrected, which means it was designed to work in microscopes that use an infinity optical path; this enables use of additional optical modules or tube lenses without changing the focal characteristics. The numerical aperture of 0.12 determines resolving power and depth of field — here it offers a compromise between contrast and working distance, giving a useful depth of focus for thicker specimens. The label indicates no cover-glass correction, so the objective is optimised for use without a cover slip or with specimens where cover-glass correction is unnecessary; this avoids spherical aberration caused by incorrect cover-glass compensation and simplifies use with mounts or holders that preclude a cover slip. Where this objective adds value in the lab or classroom The combination of 15.5 mm working distance and flat-field correction makes the lens well suited to applications such as quality control inspections, biological teaching labs and material surface observation where ease of handling and operator safety are important. The extended working distance creates more space for manipulators, micro-tools or probe heads while keeping the specimen in focus. As a component of the IOS series, the lens integrates readily into common educational and industrial microscope stands, providing reproducible imaging for routine checks or demonstration purposes. If the application is specialised or the optical path unusual, technical advice is available to confirm compatibility and expected performance; enquiries may be addressed by e‑mail or telephone to discuss requirements. For dependable flat-field performance from Euromex, contact Metav Werkzeuge today to discuss the IS.8105 objective, system compatibility and ordering details — Metav Werkzeuge can advise on integration and supply from stock Technical data Article number: IS.8105 SKU: IS.8105 Manufacturer: Euromex Product type: microscope objective Core specifications Magnification: 5× Numerical aperture: 0.12 Working distance: 15.5 mm Optical correction: Infinity-corrected Special features Plan-corrected optics No cover-glass correction IOS optical series Label: Plan PLMi 5x/0,12 IOS objective FAQ What does "no cover-glass correction" mean for everyday use? No cover-glass correction means the Euromex IS.8105 objective is optimised for specimens without a cover slip or where cover-glass thickness is not applied; this reduces spherical aberration when a cover slip is absent. Which microscope types are compatible with this objective? The lens is infinity-corrected, so the IS.8105 fits microscopes that use an infinity optical path and a compatible tube lens; compatibility checks should be made against the microscope manufacturer's specifications. Is the 15.5 mm working distance suitable for sample manipulation? Yes — the 15.5 mm working distance provides comfortable space for micro-manipulation or inspection with probes while maintaining focus and image quality with this objective. Can this objective be used for documentation and image stitching? The plan-corrected design of the IS.8105 provides a flat field that reduces distortion at the edges, supporting accurate documentation and seamless image stitching for reproducible results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5mm Plan Stress-Free PLPOLi 5x/0.12 IOS Transmitted Light Polarising Objective, No Cover Glass Correction - Euromex
Take advantage of the combination of precise polarisation-capable optics, a generous 15.5 mm working distance and reliable plan correction for consistent transmitted-light inspection — order the objective directly via Metav Werkzeuge or contact our consultants for compatibility advice. Plan stress-free PLPOLi 5x/0.12 IOS objective for iScope (IS.7905-T) — 5×, 15.5 mm working distance — Euromex The Plan stress-free PLPOLi 5x/0.12 IOS objective is optimised for transmitted-light polarisation inspections on iScope microscopes, offering a 15.5 mm working distance and operation without cover-glass correction Plan stress-free optical correction 5× magnification for low-power overview Numerical aperture 0.12 for good depth of field 15.5 mm working distance, no cover-glass correction Flat-field optics for true-to-sample imaging and reliable polarisation results The objective combines plan correction with a stress-free optical design, which keeps the imaging field flat and minimises internal birefringence. For quality control and material inspection this means fewer artefacts and truer colour contrast when working with polarised transmitted light. The PLPOLi designation indicates polarisation-optimised performance, so samples examined under crossed polarising filters show reliable extinction and interference colours. For technicians and laboratory engineers unfamiliar with these terms: a flat field reduces the need for refocusing across the image and a stress-free lens prevents unwanted internal stresses from affecting polarisation readings. Low-power overview and practical handling during sample work With 5× magnification and a numerical aperture of 0.12, the lens provides a wide field of view and good depth of field for rapid inspection and orientation steps. This configuration is ideal for scanning larger areas before switching to higher-power objectives, reducing inspection time and improving throughput. The 15.5 mm working distance gives clear space for sample manipulation, polariser inserts or thicker specimens, and the absence of cover-glass correction means the lens is suited to samples examined without a cover slip or when precise cover-glass control is not required. Integration into iScope transmitted-light polarisation setups is straightforward, accelerating routine checks and production-line sampling. Practical benefits for integration, workflow and repeatability This objective is designed for straightforward mounting in compatible optical systems and contributes to repeatable measurements thanks to its optical stability. The compatibility with an IOS optical system ensures consistent image projection into the microscope tube or camera path without unexpected vignetting. For process engineers, the main benefits are predictable polarisation behaviour, reduced inspection variability and easier sample handling. If additional technical data are required to confirm fitment with a specific iScope model or camera, technical advice is available from Metav Werkzeuge; pairing the right objective with existing microscope elements helps maintain inspection accuracy and shortens setup time. Choose Euromex optics for dependable polarisation inspection and contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical data Article number: IS.7905-T SKU: IS.7905-T Manufacturer: Euromex Product type: Microscope objective Facts Magnification: 5× Numerical aperture: 0.12 Working distance: 15.5 mm Special features Plan stress-free optical design PLPOLi polarisation optimisation IOS compatibility No cover-glass correction FAQ What magnification and numerical aperture does this objective provide? The objective delivers 5× magnification with a numerical aperture of 0.12, providing a wide field and good depth of field for low-power transmitted-light inspections. Is the objective suitable for polarisation work on an iScope? Yes, the PLPOLi design is optimised for transmitted-light polarisation and is intended for use with iScope polarisation setups for reliable birefringence and interference colour rendering. Can this objective be used without a cover slip? Yes, the lens is specified with no cover-glass correction, making it appropriate for samples examined without a cover slip or for thicker specimens where cover-glass compensation is not required. How does the 15.5 mm working distance benefit inspection workflows? The 15.5 mm working distance provides ample clearance for sample manipulation, polariser inserts and fixtures, simplifying handling and reducing the risk of contact with the lens during adjustment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.8mm Mikroskopobjektiv 10x Numerische Apertur 0.3 Arbeitsabstand 15.8 mm - Euromex
Fehlinformation: Hersteller "Euromex" ist nicht in der vorgegebenen Herstellerauswahl enthalten, was möglicherweise darauf hinweist, dass entweder ein Fehler bei der Eingabe der Herstellerauswahl vorliegt oder dass der Hersteller "Euromex" aus bestimmten Gründen nicht in der aktuellen Datenbank oder Liste der zugelassenen Hersteller aufgeführt ist, was überprüft und gegebenenfalls korrigiert werden sollte, um sicherzustellen, dass alle relevanten Herstelleroptionen korrekt dargestellt und berücksichtigt werden können, da dies für die Benutzerfreundlichkeit und die Genauigkeit der Auswahl entscheidend ist, insbesondere wenn es sich um eine wichtige Entscheidung oder einen spezifischen Anwendungsfall handelt, der von der richtigen Herstellerangabe abhängt.
150 x 150 x 230 mm Cold Light LED Source 30 W (30,000 lx) 6500 K, 230 V AC / 12 V DC - Euromex
Take advantage of a high‑intensity daylight output, low power consumption and compact design for consistent inspection results; order the unit directly via Metav Werkzeuge or request tailored advice from our consultants. LE.5211-LED LED cold light source – 30 W LED (equivalent to 120 W halogen), 30,000 lx, 6500 K (Euromex) The LE.5211-LED provides focused, daylight‑balanced illumination for microscopy and precision inspection, ideal for laboratory benches and production inspection stations. 30 W LED, equivalent to 120 W halogen 30,000 lx peak illuminance 6500 K daylight colour temperature Compact 150 x 150 x 230 mm footprint High‑fidelity illumination for accurate visual inspection A stable, daylight‑balanced light source supports reliable visual assessment and image capture. The 30 W LED design delivers an intense 30,000 lx at the focal output while consuming markedly less energy than comparable halogen units; the result is consistent contrast and colour rendering at 6500 K, which helps to reduce interpretation errors in quality control. Thanks to the cold‑light principle, thermal load on specimens is minimised, which preserves sensitive samples and prevents heat‑induced measurement drift. This clarity supports process decisions based on visual evidence rather than guesswork. Compact, flexible power and straightforward integration The unit is designed for tight workspaces: at 150 x 150 x 230 mm and a weight of 2.8 kg, the housing is portable yet stable on a bench. Dual supply options (230 V AC; 12 V DC) enable connection in laboratory and production environments, and the compact footprint simplifies retrofitting into existing inspection rigs. Note that a separate light guide is required for delivery of light to the inspection point; this approach allows individual selection of light guides to match optical accessory heads and focal lengths for different applications, making the source adaptable rather than prescriptive. Industrial compatibility, serviceability and application scope Built to serve microscopy and precision inspection workflows, the light source is compatible with a range of focusing heads and filters that require a suitable light guide. The design balances durability with serviceability so maintenance schedules remain predictable. For tasks from material inspection to assembly control, the unit offers repeatable illumination conditions that enhance measurement confidence. If supplementary technical details are needed to confirm suitability for a specific setup, Metav Werkzeuge can provide guidance and support, including accessory compatibility and delivery from stock in Emmerich. Contact Metav Werkzeuge for personalised configuration advice and to order the Euromex LE.5211-LED directly from our Emmerich warehouse — telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: LE.5211-LED Manufacturer item no.: LE.5211-LED Brand: Euromex Product type: LED cold light source Facts Power: 30 W LED (catalogue equivalent to 120 W halogen) Illuminance: 30,000 lx Colour temperature: 6500 K Supply voltage: 230 V AC; 12 V DC Weight: 2.8 kg Dimensions (H x W x D): 150 x 150 x 230 mm Special features LED cold light source Light guide required for focusing heads and filters Accessories requiring suitable light guide: LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228, LE.5231 FAQ Is a light guide included with the unit? No, a light guide is not included; the LE.5211-LED requires a separate light guide for connection to focusing heads and filters. What are the electrical supply options? The LE.5211-LED supports 230 V AC and 12 V DC input voltages for flexible installation in laboratory and production environments. How bright is the light output compared with halogen lamps? The 30 W LED of the LE.5211-LED is specified as equivalent to a 120 W halogen source and is rated for approximately 30,000 lx at the output. Which applications suit this light source best? The unit is suitable for microscopy, visual inspection, quality control and other tasks requiring stable, daylight‑balanced illumination. Are specific accessories required for certain focussing heads? Yes; several focussing heads and filters listed for this range require a compatible light guide to operate correctly with the LE.5211-LED. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm 0.33x Photo Adapter for Oxion Inverted Microscopes, C-Mount 1/3" Camera Compatible - Euromex
Optimised camera coupling for routine documentation: the OX.9833 provides a 0.33x optical reduction for correct sensor coverage and mounts to Oxion (Revision 2) and Oxion Inverso inverted microscopes via a C‑ring, ensuring consistent imaging across sessions; order the Euromex OX.9833 directly via Metav Werkzeuge or ask our consultants if needed. Euromex OX.9833 — Photo adapter with 0.33x objective for Oxion inverted microscopes The OX.9833 is a photo adapter with a 0.33x objective designed to couple 1/3‑inch cameras to Oxion (Revision 2) and Oxion Inverso inverted microscopes for reliable image capture in laboratory and teaching environments 0.33x optical reduction for correct scaling Compatible with Oxion Revision 2 and Inverso Fits 1/3‑inch cameras with C‑ring Ensure correct image scale for documentation and analysis The optical reduction of 0.33x delivers a predictable field of view adjustment that aligns microscope ocular optics with small‑format camera sensors. This adapter reduces the microscope image so that a 1/3‑inch sensor receives a properly scaled image, avoiding unexpected cropping or loss of peripheral detail. Such predictable scaling improves repeatability in image documentation and simplifies post‑processing, which is particularly valuable for routine quality control and comparative imaging tasks. Simple integration with Oxion inverted microscope systems Designed for direct mounting to Oxion (Revision 2) and Oxion Inverso models, the adapter uses a C‑ring interface compatible with standard C‑mount camera fittings. The mechanical fit allows fast attachment and removal, supporting workflows that alternate between visual inspection and image capture. By matching the mechanical and optical interfaces, the unit reduces setup time and prevents unnecessary realignments, supporting higher throughput in busy labs and teaching rooms. Optical behaviour explained for reliable sensor matching The adapter’s 0.33x objective functions as an image reducer: the microscope’s intermediate image is reduced to the correct size for a 1/3‑inch sensor, lowering the risk of vignetting and improving image uniformity across the frame. In practice, this means a larger effective working area is captured on the camera sensor without changing the microscope’s objective or tube optics. For users unfamiliar with sensor geometry, this optical reduction translates directly into fewer retakes and more usable images from the first capture. Stable performance for workshop, teaching and laboratory use Built to complement established microscope systems, this camera adapter offers consistent mechanical alignment and optical behaviour for repeated daily use. The Euromex construction emphasises precision and compatibility rather than superfluous features, supporting reliable image capture across sessions. For mixed environments where several camera types or microscopes are in use, the adapter simplifies equipment standardisation and helps maintain consistent documentation standards across teams. Request the Euromex OX.9833 from Metav Werkzeuge for dependable camera coupling and advice on integration to your Oxion system — Metav’s consultants in Emmerich can advise on compatibility and delivery to your workshop. Technical data Article number: OX.9833 Manufacturer: Euromex Product type: Microscope camera adapter Facts Magnification: 0.33x Camera format: 1/3‑inch Mount: C‑ring / C‑mount Special features Compatible with Oxion (Revision 2) and Oxion Inverso For inverted microscopes and camera coupling Optical reduction for camera sensors FAQ What cameras are compatible with this adapter? The adapter is designed for 1/3‑inch cameras with a C‑ring interface; the Euromex OX.9833 matches standard C‑mount fittings for direct camera attachment. Does the adapter change the microscope magnification? The unit provides a 0.33x optical reduction to match the microscope image to the camera sensor; it does not alter the objective seated in the microscope but changes the image scale delivered to the camera. Is the adapter suitable for Oxion Revision 1 models? Compatibility is specified for Oxion (Revision 2) and Oxion Inverso; the Euromex OX.9833 is not listed for older revisions and should be checked against the microscope’s mechanical interface before use. Will the adapter reduce vignetting on small sensors? By matching the intermediate image to a 1/3‑inch sensor, the adapter helps reduce vignetting and improves image uniformity for cameras with smaller sensors. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm 10x bScope BS.8710 Microscope Objective 0.25 NA, 5.0 mm Working Distance - Euromex
Take advantage of the 10x magnification combined with a numerical aperture of 0.25 and a compact 5.0 mm working distance for reliable mid‑range imaging in laboratory settings; order the bScope BS.8710 directly via Metav Werkzeuge or consult Metav's advisors for application support. bScope BS.8710 microscope objective — 10x, NA 0.25 The bScope BS.8710 microscope objective is a mid‑power optical element designed for routine laboratory microscopy and life‑science inspection where balanced resolution and working distance are required. 10x magnification Numerical aperture 0.25 Working distance 5.0 mm Effective mid‑range magnification for routine inspection The 10x magnification delivers a practical compromise between field of view and detail, making this objective suitable for general sample overview and documentation. With moderate enlargement, the lens enables efficient scanning of specimens while preserving context, which reduces the need for frequent objective changes. The balanced magnification supports a wide range of laboratory tasks from sample preparation checks to documentation, improving throughput in inspection workflows. Balanced aperture for clear contrast and definable resolution A numerical aperture of 0.25 determines both the resolving power and the light‑gathering capacity of the lens. In practical terms, the specified NA 0.25 improves image sharpness compared with lower‑aperture equivalents and permits finer detail to be discerned at mid magnification. Numerical aperture should be understood as a measure of the cone of light the objective accepts: higher values generally yield better resolution but narrower depth of field. The present aperture provides a useful trade‑off for clear, contrasty images without demanding specialised illumination. Compact working distance for confined setups and higher stability The working distance of 5.0 mm denotes the distance from the front lens to the focal plane and is important where space between objective and specimen is limited or where additional apparatus (such as micromanipulators or environmental chambers) is used. A short working distance like WD 5.0 mm promotes mechanical stability and reduces sensitivity to vibration for close‑focus tasks, though it requires careful handling to avoid contact with samples. Integration into existing microscope systems is straightforward when the optical and mechanical constraints are considered in planning. Quality design and application context Produced under the bScope series by Euromex, this objective is specified as 10x/0.25 and is referenced in the Life Science product documentation. The construction aims to combine dependable optical performance with straightforward use in laboratory environments. For users seeking predictable imaging performance at moderate magnifications, the lens represents a pragmatic solution that complements both educational and professional microscopy setups. For tailored advice on integrating the bScope BS.8710 into specific microscope models or for procurement assistance, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — Metav's consultants will provide application support and ordering guidance. Technical data Article number: BS.8710 SKU: BS.8710 Manufacturer: Euromex Product type: Microscope objective Series: bScope Facts Magnification: 10x Numerical aperture: 0.25 Working distance: 5.0 mm Special features Description: Microscope objective bScope BS.8710; magnification 10x; NA 0.25; WD 5.0 mm Additional notes: 10x/0.25 PLPHi objective (Life Science PDF p.9) FAQ What magnification does this objective provide? The bScope BS.8710 provides 10x magnification, suitable for mid‑range inspection and documentation tasks. How does the numerical aperture affect image quality? The numerical aperture of 0.25 of the BS.8710 defines its resolving power and light collection; a higher NA improves resolution and contrast while narrowing depth of field. Is the working distance sufficient for samples with coverslips or small devices? The working distance of 5.0 mm is compact and appropriate for many benchtop and life‑science applications, though clearance should be verified for thick samples or additional hardware. Can this objective be used for live cell observation? This objective is specified for laboratory microscopy; the BS.8710's optical parameters support routine observation, but compatibility with live‑cell chambers depends on the chamber geometry and required clearance. Where is the technical specification for the objective documented? Technical details for the bScope BS.8710 are referenced in the Life Science PDF (page 9), which lists the 10x/0.25 PLPHi format and WD 5.0 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Aluminium Case For NexiusZoom Microscopes With Stands - Euromex
Take advantage of a robust aluminium case that is designed specifically for safe handling and storage of NexiusZoom microscopes with their stands; the lightweight construction supports frequent transport while preserving instrument integrity. Order the case directly via Metav Werkzeuge or consult their specialists for delivery and compatibility advice. Aluminium case for NexiusZoom microscopes with stands (P/S/PG) NZ.4300 by Euromex The aluminium case for NexiusZoom microscopes with stands (P/S/PG) NZ.4300 offers secure transport and storage for laboratory and field use, engineered for compatibility with the NexiusZoom range and their P, S and PG stand variants. Robust aluminium shell for secure transport Compatible with NexiusZoom P, S and PG stands Designed for microscope transport and safe storage Protection that keeps instruments ready for work The aluminium case is intended to provide reliable protection when microscopes are moved between workstations or stored between uses. Constructed from metal that resists everyday knocks and handling, it reduces the risk of impact and environmental exposure during transit. This means instruments remain calibrated and ready, so operational downtime is minimised and productivity is supported. Compatibility and practical handling for workshops and labs Designed specifically for the NexiusZoom microscopes, the case accommodates the microscope together with its stand variants and associated small components, helping to keep items organised during transport. The tailored design supports safe handling routines in both industrial and educational settings, enabling technicians and engineers to move equipment confidently between locations without compromising instrument alignment. Reliable logistics and professional support for purchasing decisions Suppliers and procurement teams benefit from a transport solution that simplifies logistics: a single, durable case reduces packing time and protects capital equipment during distribution. Metav Werkzeuge acts as a dependable sourcing partner and can supply product information, availability updates and logistics support from their Emmerich location, helping to integrate procurement into existing workshop supply chains. Contact Metav Werkzeuge today for availability and tailored advice on the Euromex aluminium case NZ.4300; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: NZ.4300 SKU: NZ.4300 Manufacturer: Euromex Dimensions & weights No numerical data provided Materials & features Material: aluminium case Application: transport for NexiusZoom microscopes with stands P/S/PG Product category: microscope transport case FAQ Is the case suitable for all NexiusZoom microscope models? The aluminium case NZ.4300 is specified for NexiusZoom microscopes with the P, S and PG stand variants and is intended to accommodate the instrument and its stand configuration. What level of protection does the case offer during transport? The Euromex aluminium case provides secure transport and protection against routine handling and movement, helping to reduce shock and exposure-related risks when instruments are relocated. Can the case be used for storage as well as transport? Yes, the design of the microscope transport case supports both safe storage and transport, helping to keep equipment organised and ready for immediate use. Are additional accessories included with the case? The product information lists the aluminium transport case intended for NexiusZoom microscopes; details on included accessories are not specified and can be confirmed with Metav Werkzeuge. How can procurement teams confirm availability and lead times? Availability and delivery information can be provided by Metav Werkzeuge; contact details are available in the product listing and in the purchase communication. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Aspheric Focusing Lens For LE.5222/LE.5228 On LE.5213/LE.5214/LE.5215, Precision Mount - Euromex
Take advantage of improved illumination control and straightforward integration: the combination of an aspherical optical element and dedicated mounting compatibility ensures sharper focus and reduced aberration in light-guide assemblies. Order the component directly via Metav Werkzeuge or consult their specialists for integration advice. LE.5224 Aspherical focusing lens — Light‑guide focusing accessory, compatible with LE.5222 / LE.5228 LE.5224 is an aspherical focusing lens designed for precise light management in laboratory illumination and inspection assemblies, compatible with selected Euromex light‑guide housings Aspherical optical design for sharper focus Compatible with LE.5222 and LE.5228 mounts Fits LE.5213, LE.5214 and LE.5215 housings Precision accessory for light‑guide systems Sharper illumination with reduced optical aberration The aspherical lens element provides a measurable improvement in beam shaping compared with simple spherical optics, leading to reduced spherical aberration and a more uniform spot profile. For inspection tasks that require consistent illumination, this translates into clearer contrast and fewer artefacts in the field of view. The component is presented as a compact light‑guide focusing accessory that improves the effective illumination quality without altering the existing light source, enabling a technical upgrade of the optical path with minimal system change. Designed for direct integration into established housings Compatibility with the LE.5222 and LE.5228 mounting carriers allows straightforward retrofitting into assemblies based on the LE.5213, LE.5214 and LE.5215 housings. This direct fit minimises assembly time and avoids custom adapters, which reduces installation complexity and downtime. By matching mechanical interfaces and optical alignment, the accessory supports consistent repeatability in set‑ups used in microscopy‑grade illumination and workshop inspection stations. Practical benefits for workflow and maintenance As a small, dedicated focusing accessory, the lens delivers a targeted upgrade path for systems that demand improved illumination control while keeping maintenance effort low. The design supports predictable optical behaviour across repeated insertions and removals, helping to maintain process stability in production or laboratory environments. Where specifications for material or coating are not listed, the component should be treated as an optical upgrade element to be combined with the existing Euromex light‑guide assembly and checked within the actual application for compatibility. For integration support or to discuss suitable configurations with the LE.5224 aspherical focusing lens, contact Metav Werkzeuge for expert advice and local supply from Emmerich Technical Data Article number: LE.5224 SKU: LE.5224 Manufacturer: Euromex Product type: Light guide focusing accessory Facts Image file size: 56795 Special features Aspherical focusing lens Mounting in LE.5222 or LE.5228 For use on LE.5213, LE.5214 and LE.5215 Category: Microscopy accessories → Illumination → Accessory Gallery image available (LE.5224.jpg) FAQ What improvement does an aspherical focusing lens provide? An aspherical focusing lens reduces spherical aberration and produces a more uniform illumination spot; the LE.5224 therefore yields clearer, more consistent lighting for inspection tasks. Which housings and mounts are supported? The accessory is specified for installation in LE.5222 or LE.5228 mounts and is intended for use on LE.5213, LE.5214 and LE.5215 housings. Is the material or coating specified for this lens? No material or coating details are provided in the available data for the LE.5224; users should assume unspecified optics and verify compatibility in their own application. Can the lens be retrofitted into existing Euromex light‑guide assemblies? Yes, the LE.5224 is designed as a retrofit focusing accessory for compatible Euromex mounts and housings, enabling upgrades without major system changes. Is technical support available for integration? Integration guidance is available from Metav Werkzeuge, who can advise on using the LE.5224 within existing inspection and illumination set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm C-Mount Adapter 0.5x for Zeiss 60N-C / 60N-T2 Photo Ports, C-Mount Thread - Euromex
Take advantage of the 0.5x optical reduction combined with the standard C‑Mount interface for flexible camera integration and wider fields of view; order the adapter directly via Metav Werkzeuge or consult our team for compatibility advice. C‑Mount Adapter 0.5x for Zeiss 60N‑C / 60N‑T2 (AE.9850‑ZA) — Microscope Camera Adapter by Euromex The C‑Mount Adapter 0.5x for Zeiss 60N‑C / 60N‑T2 (AE.9850‑ZA) is a microscope camera adapter that enables 0.5x optical coupling between Zeiss photo ports and C‑mount cameras for documentation and inspection tasks 0.5x optical reduction for wider field of view Compatible with Zeiss 60N‑C and 60N‑T2 ports Standard C‑Mount thread Ø25.4 mm, 32 TPI Fits Axio, Imager, Observer and Stemi series Capture larger areas with reduced effective magnification The 0.5x reduction provided by this adapter increases the observable area on the sensor, making it easier to document larger specimens or assemblies without changing objective lenses. By halving the image scale, the adapter helps to reduce vignetting when using larger camera sensors and improves the match between microscope optics and digital detectors. This results in more efficient image capture for routine documentation, teaching or process control while preserving optical integrity. Dependable compatibility across Zeiss photo ports and microscope lines Designed for direct use with Zeiss 60N‑C / 60N‑T2 photo interfaces, the adapter supports a broad range of systems including Axio Examiner, Imager, Lab, Observer, Scope and Zoom configurations as well as Stemi 508 and SteREO Discovery. Compatibility with established Zeiss ports ensures predictable mechanical fit and optical alignment, reducing setup time in laboratory and inspection environments and allowing existing imaging chains to be extended with minimal adjustments. Standardised mechanical interface for reliable mounting The adapter uses the recognised C‑Mount standard with a thread diameter of Ø25.4 mm (1 inch) and 32 threads per inch (TPI), ensuring secure connection to C‑mount cameras and accessories. The standardised thread and precision machining maintain concentricity and minimise tilt, which supports consistent sensor coverage and reliable repeatability when cameras are mounted and removed for maintenance or tool changes. Sensor selection should follow the camera matrix to avoid mismatches in sensor size and optics. Practical applications and target users This adapter is suited to laboratories, quality assurance departments, educational institutes and industrial inspection stations that require dependable camera integration with Zeiss microscopes. It is particularly useful for users who need to increase the field of view without replacing objectives, for photodocumentation workflows, and for teams standardising camera setups across multiple benches. The accessory supports streamlined workflows and reduces the number of objective swaps during routine imaging tasks. For technical guidance and fast delivery of the Euromex C‑Mount Adapter 0.5x (AE.9850‑ZA), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — Metav Werkzeuge can advise on sensor selection and compatibility and arrange prompt supply to the workshop Technical Data Article number: AE.9850‑ZA Adapter: 0.5x Connection: C‑Mount Manufacturer: Euromex Product type: Microscope camera adapter SKU: AE.9850‑ZA Core specifications Magnification: 0.5x Thread diameter: Ø25.4 mm (1 inch) Thread pitch: 32 TPI Compatibility & special features Compatible with Zeiss 60N‑C and 60N‑T2 photo ports Fits Axio Examiner, Imager, Lab, Observer, Scope, Zoom Compatible with Stemi 508 and SteREO Discovery Standard C‑Mount interface Sensor class: select according to camera matrix FAQ Can this adapter be used with all C‑mount cameras? The adapter provides a standard C‑Mount thread and therefore mounts to typical C‑mount cameras; sensor size and camera matrix should be checked to ensure optimal coverage when using the Euromex AE.9850‑ZA. Will the 0.5x adapter change the working distance or image quality? The 0.5x optical reduction alters the image scale and increases the field of view but does not change the microscope’s objective working distance; image quality depends on the match between optics and the chosen camera sensor. Is the adapter compatible with non‑Zeiss microscopes that have a C‑mount port? If a microscope exposes a standard C‑Mount thread, the Euromex adapter can interface mechanically; when using non‑Zeiss photo ports, optical alignment and sensor class should be verified before routine use. Does the AE.9850‑ZA require additional spacers or adapters for certain camera models? Some camera-lens combinations may need spacers to achieve optimal back focal distance; consult camera specifications and the sensor matrix to determine if additional spacing is necessary for the Euromex adapter. Which applications benefit most from the 0.5x reduction? Applications that require broader context imaging—such as assembly inspection, educational demonstrations, or documentation of larger samples—benefit from the reduced magnification and larger field of view provided by this adapter. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm C-Mount High-Resolution Relay 0.35x Lens for 1/3" Camera, 0.35x - Euromex
Take advantage of the precision optics and compact C‑Mount format to expand field of view and improve sensor coverage in existing Delphi‑X imaging setups; order the relay lens directly via Metav Werkzeuge or consult our specialists for application advice. C-Mount high-resolution relay 0.35x lens for 1/3 inch C-Mount camera – Euromex DX.9835 The C-Mount with high-resolution relay 0.35x lens for 1/3 inch C‑Mount camera for Delphi‑X DX.9835 is a compact relay optic designed to adapt and optimise 1/3 inch camera sensors within Delphi‑X microscope and inspection systems. High-resolution 0.35x relay lens For 1/3 inch C-Mount cameras Compatible with Delphi-X systems Model DX.9835 by Euromex Optimised optics for wider sensor coverage and image fidelity The relay lens delivers a 0.35x optical reduction that increases the field of view on a 1/3 inch sensor while preserving image sharpness. By using a high-resolution relay lens, the optical image circle is matched to the camera format, which reduces vignetting and improves sensor coverage so more pixels capture useful image information. In practice this means larger inspection areas per frame and fewer stitching operations for metrology or defect analysis, enabling more efficient image acquisition in routine inspection tasks. Seamless integration into microscopy and industrial inspection The adaptor is built to the C‑Mount standard, ensuring mechanical compatibility with a wide range of microscope camera ports and industrial imaging heads. Designed for Delphi‑X camera systems, the relay optic maintains alignment and focus stability required in quality control and laboratory environments. By converting the microscope output to an optimised scale for the sensor, the relay lens supports accurate documentation and reliable measurement workflows, which is particularly valuable for traceable inspections and photographic records in production environments. Practical performance, mounting and the right application fit Mechanical mounting follows the established C‑Mount thread, enabling quick attachment and repeatable positioning. The optical design emphasises precision over decorative features: reliable imaging, consistent scale conversion and durable use in laboratory and workshop conditions. This relay lens is suited for microscopy, material inspection and any application where increasing the effective field of view of a 1/3 inch sensor benefits throughput. The compact format keeps the optical path short, reducing handling effort and simplifying integration into existing setups. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DX.9835 relay lens into Delphi‑X systems and to arrange procurement or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.9835 SKU: DX.9835 Brand: Euromex Product type: microscope camera adapter Facts Magnification: 0.35x Special features C‑Mount compatibility For 1/3 inch C‑Mount camera High-resolution relay lens Compatible with Delphi‑X FAQ What sensor formats is the relay lens optimised for? The relay lens is optimised for 1/3 inch C‑Mount cameras and improves sensor coverage when used with compatible Delphi‑X imaging setups. Does the lens change the working distance of the microscope objective? The relay lens modifies the image scale delivered to the camera; working distance at the specimen is set by the microscope objective, while the relay adapts the image to the 1/3 inch sensor. Is the Euromex DX.9835 suitable for industrial inspection cameras? Yes, the Euromex DX.9835 microscope camera adapter is intended for inspection and microscopy workflows where a 0.35x relay improves field of view and imaging efficiency. Will the relay lens cause vignetting on larger sensors? The relay is specified for small‑format sensors; when used with a 1/3 inch sensor the design reduces vignetting. Larger sensors may experience image circle limitations and are not the intended application. How does the relay lens affect image resolution? By matching the optical image circle to the sensor and providing a high-resolution relay, the DX.9835 maintains usable resolution while increasing the captured area, supporting clearer images for inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Cold Light Source LE.5211 150W Halogen, 3000K - Euromex
Take advantage of high-intensity illumination, compact design and flexible power options to bring reliable microscopy lighting into the workshop or laboratory. The combination of 150 W halogen output, a 3000 K colour temperature and the option to reach 21,000 lx with the LE.5214 light guide supports precise visual inspection and imaging; order the Cold light source LE.5211 directly via Metav Werkzeuge or ask our consultants if needed. Cold light source LE.5211 – 150 W halogen, 3000 K (Euromex) The Cold light source LE.5211 is a compact halogen illumination unit for microscopy and inspection tasks, designed to supply steady, high-intensity light via a separate light guide for sensitive specimen work. 150 W halogen cold light source 3000 K colour temperature 21,000 lx with LE.5214 light guide Compact 150 x 150 x 230 mm footprint High-intensity, consistent illumination for precise inspection The unit delivers 150 W halogen output that, when combined with a suitable light guide, provides bright, uniform lighting essential for accurate visual inspection and documentation. With a measured 21,000 lx available using the LE.5214 guide, the lamp supports tasks that demand fine contrast and detail recognition. The halogen source is specified as a cold light source, meaning the light is transmitted through a fibre optic guide so that the illuminated area remains cool; this benefits temperature-sensitive samples and components while maintaining image clarity. The design prioritises dependable luminous flux for routine microscope work or inspection stations where steady, shadow-free illumination is required. Compact format and flexible power for easy integration Measuring 150 x 150 x 230 mm, the housing takes up little bench or rack space and weighs only 3.9 kg, allowing straightforward placement near microscopes or inspection rigs. The unit accepts 230 V AC mains and provides a 15 V DC output option, making it adaptable to different system setups and reducing the need for additional converters. Accessories such as focussing heads and filters require an appropriate light guide; compatibility with LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228 and LE.5231 ensures that the lamp can be configured precisely for the required beam shape and working distance. This compact and flexible configuration helps to keep workstations organised without compromising illumination performance. Built for dependable everyday use with straightforward maintenance The lamp is supplied as a cold light source with recognised Euromex engineering, offering a practical balance of brightness and usability for laboratory or workshop environments. The colour rendering at 3000 K provides a warm, consistent tone suitable for inspection and documentation under typical microscopy conditions. Replaceable spare lamps (SL.5235, SL.5240) are available, supporting continuity of operation and simplifying maintenance planning. Clear specification of power and dimensions allows planners to integrate the unit into measurement benches and inspection systems with confidence, while the need to purchase a compatible light guide separately offers configurability to match specific optical setups. For detailed configuration advice or to discuss which light guide suits the application, contact Metav Werkzeuge for tailored guidance on the Euromex Cold light source LE.5211 — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a consultation and next steps. Technical Data Article number: LE.5211 SKU: LE.5211 Manufacturer: Euromex Product type: Cold light source Power supply: 230 V AC; 15 V DC Facts Power: 150 W halogen Weight: 3.9 kg Dimensions: 150 x 150 x 230 mm (H x W x D) Colour temperature: 3000 K Illuminance: 21,000 lx with LE.5214 Special features Light guide required separately Compatible with LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228, LE.5231 Spare lamps: SL.5235, SL.5240 Cold light source for microscopy illumination FAQ What illumination level can be expected with the unit? The unit achieves up to 21,000 lx when used with the LE.5214 light guide; actual illuminance depends on the chosen light guide and focussing head. Is a light guide included with the lamp? No, a light guide is not included; the cold light source requires a separate guide such as LE.5214 to deliver light to the work area. Which power connections does the unit accept? The cold light source operates from 230 V AC mains and provides a 15 V DC option as specified for integration. Are spare lamps available for continued operation? Yes, compatible spare lamps are listed as SL.5235 and SL.5240 to support maintenance and minimise downtime. Can this lamp be used for temperature-sensitive specimens? Yes, as a cold light source the illumination is transmitted via a light guide so that the specimen area remains comparatively cool. Manufacturer: Metav IndustryLine / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Condenser Standard Abbe 1.25 NA With Darkfield And Phase Contrast Slots - Euromex
Benefit from the 1.25 NA Abbe design and the integrated slot for darkfield and phase contrast sliders; precise, uniform illumination and simple integration into teaching and routine inspection workflows support reliable imaging. Order the condenser directly via Metav Werkzeuge or consult our specialists for application guidance. iScope IS.9102 condenser — 1.25 NA Abbe condenser with darkfield & phase contrast slot (Euromex) The iScope IS.9102 is a condenser for microscopes, engineered to deliver high‑numerical‑aperture illumination for brightfield, darkfield and phase contrast techniques in educational and laboratory environments 1.25 NA Abbe condenser Slot for darkfield and phase contrast sliders Stable, uniform illumination Compatible with iScope microscope series High‑NA illumination for sharper, brighter images The core advantage of an Abbe condenser with 1.25 NA is improved light gathering, which directly enhances image resolution and contrast under high‑magnification objectives. Numerical aperture (NA) is a technical measure of how much light an optical component can collect; a higher NA allows finer detail to be resolved and provides brighter images at equivalent settings. For routine microscopy and teaching laboratories, this translates into clearer specimen detail without resorting to excessive illumination that can damage delicate samples. The condenser’s classic design is geared towards dependable optical performance while remaining straightforward to align and maintain. Flexible contrast techniques with fast, secure swapping The built‑in slot for darkfield and phase contrast sliders lets users change contrast methods quickly, avoiding lengthy reconfiguration. Darkfield increases visibility of transparent specimens by scattering light into the objective, while phase contrast converts small optical path differences into intensity variations for imaging unstained cells. Having a condenser that supports both techniques reduces equipment complexity and enables a single illumination system to serve diverse sample types. The design ensures precise positioning of sliders so that the desired contrast method is reproducible across sessions, aiding consistent results for teaching demonstrations or comparative experiments. Integration, reliability and practical benefits for labs Manufactured to fit the iScope series and similar microscope stands, the condenser offers straightforward mechanical integration and optical matching. Durable construction and standard mating dimensions simplify replacement and upgrades in multi‑station labs. For technicians and educators, the IS.9102 delivers reliable alignment and consistent illumination control, reducing time spent on set‑up and increasing productive bench time. Where users are new to microscopy, the unit’s compatibility with common contrast accessories provides a gentle learning curve: technical terms such as NA, condenser aperture and slider function are readily demonstrated with practical results, making the component suitable for both novices and experienced operators. Contact Metav Werkzeuge for personalised advice on the Euromex iScope IS.9102 condenser and to discuss compatibility, delivery and integration from our Emmerich location Technical Data Article number: IS.9102 SKU: IS.9102 Label: Kondensor iScope IS.9102 Manufacturer: Euromex Model series: iScope Product type: Condenser Facts Numerical aperture: 1.25 NA Special features Standard Abbe condenser design Slot for darkfield and phase contrast sliders Source: Education PDF (Life Science) FAQ What does 1.25 NA mean for routine microscopy? A higher 1.25 NA improves light collection and resolution; the Euromex iScope IS.9102 condenser provides brighter, sharper images under high‑magnification objectives, helping to reveal finer specimen detail. Can the condenser be used for phase contrast work? Yes. The condenser includes a dedicated slot for phase contrast sliders, enabling the iScope IS.9102 to support phase contrast methods when combined with matching phase objectives. Is darkfield microscopy supported by this condenser? Yes. The integrated slot accepts darkfield sliders so the condenser can be configured for darkfield illumination without additional optical rearrangement. Which microscope stands is this condenser compatible with? The condenser is designed for the iScope series and comparable microscope stands with standard condenser fittings; compatibility ensures straightforward mechanical and optical integration. How does the condenser benefit teaching laboratories? With simple slider changes for contrast and a robust Abbe design, the iScope IS.9102 offers reproducible results and an accessible platform for demonstrating contrast techniques to students. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm C‑Mount High‑Resolution Relay 0.63x Lens for 2/3" C‑Mount Camera, 0.63x - Euromex
Take advantage of a high‑resolution 0.63× relay lens paired with a precise C‑Mount interface to deliver faithful image transfer to 2/3″ sensors; the combination improves field of view and sensor utilisation while preserving image detail. Order or request advice via Metav Werkzeuge for seamless supply and integration into microscopy imaging setups. C‑Mount high‑resolution relay 0.63x lens for 2/3″ C‑Mount camera – Euromex DX.9863 A C‑Mount high‑resolution relay 0.63× lens intended for 2/3″ C‑Mount cameras, optimised for Delphi‑X microscopy imaging systems and camera adapters High‑resolution 0.63× relay lens For 2/3″ C‑Mount camera systems Optimised for Delphi‑X imaging Precision C‑Mount mechanical interface Consistent image scale and improved sensor match This 0.63× relay lens is engineered to adapt the optical image projected by a microscope or relay optics to the active area of a 2/3″ sensor, reducing over‑magnification and increasing usable field of view without sacrificing detail. By matching the image circle to the sensor size, the lens helps to avoid vignetting and to maintain consistent optical fidelity across the frame. The result is a predictable image scale that simplifies measurement routines and reduces the need for frequent recalibration. Integration into microscopy workflows for reliable results Designed for straightforward integration with C‑Mount camera systems and specifically optimised for Delphi‑X, this relay lens supports dependable image transmission from the microscope optical path to the digital sensor. The high‑resolution construction preserves contrast and fine structure, which is essential for demanding inspection and documentation tasks. Using a relay objective reduces the workload on image processing by delivering a cleaner, well‑scaled image to downstream software and analysis tools. Practical benefits for labs and inspection stations The robust C‑Mount interface and compact relay design make installation and alignment rapid and repeatable, reducing downtime during system changes. For quality control and routine microscopy, the lens delivers stable geometry and consistent illumination across captures, so imaging chains perform reliably under production conditions. The combination of precise mechanics and optical performance supports a wide range of laboratory and industrial imaging applications where reproducible results matter. Secure precision imaging components through Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and availability Technical data Article number: DX.9863 SKU: DX.9863 Manufacturer: Euromex Product type: Microscope camera adapter Image file: DX.9863.jpg Core specifications Magnification: 0.63× Compatible sensor size: 2/3″ Mount type: C‑Mount Special features High‑resolution relay lens Optimised for Delphi‑X systems Intended for 2/3″ C‑Mount cameras Euromex brand FAQ What sensor sizes is the relay lens compatible with? The relay lens is specified for use with 2/3″ sensors and C‑Mount camera systems; the Euromex DX.9863 adapts the optical image to that sensor format. Can the lens be used with other microscope brands besides Delphi‑X? Yes. Although optimised for Delphi‑X, the relay objective is a C‑Mount high‑resolution lens and can be integrated with other microscope camera adapters that accept a 2/3″ sensor and C‑Mount interface. How does the 0.63× magnification affect field of view? The 0.63× relay lens reduces the image magnification delivered to the sensor, increasing the usable field of view on a 2/3″ camera and helping to avoid vignetting while preserving image detail. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Darkfield Slider For Standard Abbe Condenser, Slot Mount - Euromex
Take advantage of precise darkfield illumination and simple integration with standard Abbe condensers to improve contrast for transparent specimens; combine reliable construction with straightforward handling for consistent microscopy results. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. bScope BS.9170 Darkfield stop slider for standard Abbe condensers bScope BS.9170 is a darkfield stop slider designed for use with standard Abbe condensers, offering a compact solution to achieve high-contrast illumination of transparent samples in teaching and routine laboratory work. Compact darkfield slider for Abbe condensers Fits condensers with a standard slot Enables high-contrast illumination of samples Robust mounting for secure installation Enhanced contrast for transparent specimens The darkfield insert provides a controlled annular aperture that redirects illumination away from the objective axis, producing a bright-field specimen outline against a dark background. This method emphasises edges and fine structures in unstained biological samples and thin transparent materials, delivering high-contrast images without additional staining. The optical principle is efficient for detecting minute features such as cell boundaries, fibres and surface defects, making the accessory particularly valuable in educational settings and routine inspections where visual clarity is essential. Compatibility with standard Abbe condensers and easy fitting Designed as a slider for condensers with a slot, the accessory ensures compatibility with most standard Abbe condenser housings used in life-science and teaching microscopes. The compact format allows for fast insertion and removal, enabling seamless switching between brightfield and darkfield techniques during observation sessions. Because the component aligns with the condenser slot, mechanical integration is straightforward and repeatable, reducing alignment time and supporting consistent illumination geometry across multiple users and instruments. Practical benefits for laboratories and classrooms The accessory contributes to workflow efficiency by reducing setup complexity when darkfield is required intermittently. Its simple mechanical design minimises maintenance needs, while the sturdy mounting improves positional stability during routine use. For trainers and laboratory technicians, the accessory offers a reliable means to demonstrate contrast-enhancing optics and to perform quick visual checks on transparent specimens, combining educational value with practical inspection capability. Purpose and application notes This darkfield slider is suitable wherever high-contrast visualisation of translucent samples is required and where a standard Abbe condenser with a slot is available. The accessory complements transmitted-light microscopy techniques and supports common life-science and teaching applications. For detailed optical compatibility with a specific microscope model or condenser type, consult the available product references and technical documents provided by the manufacturer. Contact Metav Werkzeuge today for ordering information, compatibility checks or application guidance — Metav’s specialists can advise on integrating the bScope BS.9170 into existing microscopy setups and supply the accessory directly from Emmerich. Technical Data Article number: BS.9170 SKU: BS.9170 Brand: Euromex Model series: bScope Facts Compatibility: standard Abbe condenser slot Product type: darkfield stop / slider Source reference: Education PDF S. 21; Life Science PDF S. 9,39 Special features Darkfield stop slider for Abbe condensers Compact, slot-mounted format Suitable for teaching and life-science microscopy FAQ What is the primary function of this darkfield slider? The darkfield slider creates an annular illumination path so that the specimen appears bright against a dark background, improving visibility of fine details with the bScope BS.9170 darkfield stop. Will the slider fit any condenser? The slider is intended for condensers that accept a standard slot; compatibility depends on the condenser design and slot dimensions, so checking the condenser specifications is advised. Can the darkfield slider be used for both teaching and routine inspection? Yes, the accessory is designed for educational demonstrations and routine laboratory inspections where enhanced contrast without staining is required. Is any additional optical adjustment necessary after insertion? Basic condenser alignment may be required to centre the illumination and achieve optimal darkfield effect; the slider’s slot format supports repeatable positioning. Where does the product information originate from? Technical references for the accessory are cited in the Education and Life Science PDFs (Education PDF S. 21; Life Science PDF S. 9,39), which detail the slider’s application and compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Directional 12 x 1W LED Ring Light for MZ.4705, Flood Control - Euromex
Take advantage of directional illumination and low-heat LED output for repeatable, high-contrast inspections; compatibility with the MZ.4705 ensures immediate integration. Order the unit directly via Metav Werkzeuge or consult the technical team for application guidance. MZ.4735 Directional 12 x 1 W LED Ring Light by Euromex MZ.4735 is a directional ring light designed to deliver controlled, low-heat illumination for the MZ.4705 microscope, optimised for fine inspection and digital imaging tasks Directional 12 x 1 W LEDs Compatible with MZ.4705 microscope Uniform illumination for inspection Low-heat LED modules for sensitive samples Improve measurement and inspection reliability with targeted light The directional arrangement of 12 x 1 W LEDs provides a focused beam that reduces stray reflections and reveals surface detail more reliably than diffuse sources. For inspection tasks where contrast and shadow control matter, the ring illumination unit delivers consistent results across the field of view. The compact lighting assembly is engineered to match the optical path of the referenced microscope, enabling stable imaging and fewer retakes during quality assurance or documentation workflows. This translates into measurable time savings and fewer false rejections in routine checks. Energy-efficient operation and thermal benefits for sensitive samples Built on modern LED technology, the lamp achieves high luminous output with modest electrical demand. Each 1 W emitter contributes to a total nominal output sufficient for most stereomicroscopy and digital documentation applications, while maintaining a low-heat profile that helps protect heat-sensitive specimens and avoids sample dehydration. The reduced thermal load also lessens strain on delicate optical components during prolonged use, which supports longer service intervals and predictable performance under continuous operation. The combination of efficiency and thermal control supports both laboratory and production-floor environments. Seamless integration and practical handling for routine use Designed as a microscope lighting accessory in the ring lights category, this illumination module installs cleanly on the compatible head of the MZ.4705, ensuring repeatable alignment and minimal setup time. Cable routing and the compact form factor are intended to fit into existing inspection stations or imaging rigs without major adaptation. For maintenance, the LED array requires significantly less attention than conventional lamps, lowering downtime and simplifying inventory for spare parts. The Euromex ring lamp is therefore a practical choice where consistent visualisation and operational availability are priorities. Contact Metav Werkzeuge for application advice or to confirm compatibility with specific inspection setups and microscope models; their specialists can provide technical clarification and order support for this Euromex lighting solution. Technical Data Article number: MZ.4735 SKU: MZ.4735 Brand: Euromex Product type: Microscope lighting Category path: Microscopy accessories > Illumination > Ring lights Facts Light source: 12 x 1 W LEDs Total nominal power: 12 W Compatibility: Designed for MZ.4705 Special features Directional LED arrangement Low-heat operation Designed for inspection and imaging Image resource: MZ.4735.jpg FAQ What microscopes is this ring light compatible with? The MZ.4735 ring light is designed for compatibility with the MZ.4705 microscope and aligns with the optical requirements of that model. How much power does the lighting unit consume? The lamp comprises 12 x 1 W LEDs, giving a total nominal power of 12 W as specified for the MZ.4735 microscope lighting accessory. Is the LED output suitable for imaging and documentation? Yes; the directional LED arrangement of the MZ.4735 delivers controlled illumination that improves contrast for imaging and digital documentation tasks. Does the lamp generate a lot of heat during use? The Euromex ring light is specified for low-heat operation, making it suitable for work with heat-sensitive specimens and prolonged inspection sessions. Are spare parts or replacements available for the LEDs? Replacement policies and spare components vary by supplier; the MZ.4735 uses standard LED modules and enquiries can be directed to the vendor for service options. Can this illumination unit be used for stereomicroscopy and simple macro inspection? The directional design and uniform coverage of the MZ.4735 make it appropriate for stereomicroscopy and macro inspection where shadow control and surface detail are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Flexible Gooseneck Light Guide with 6,500K White Power LED, Replaceable Self‑Holding Design - Euromex
Data inconsistency detected: the manufacturer "Euromex" in the product data is not listed in the provided manufacturer directory; generation of the full product description is therefore not possible, as the absence of a matching entry in the directory prevents the system from verifying the manufacturer details, which are essential for accurately compiling and validating the product description, ensuring it meets the required standards and aligns with the database's integrity rules, thereby avoiding potential errors or discrepancies in the final output that could arise from incomplete or unverified manufacturer information, which is a critical component of the product description process.
150mm Microscope Stage with Gorilla Glass, Left-Handed Hole and Specimen Holder - Euromex
Robust Gorilla Glass on a left-handed layout delivers secure sample support and reliable illumination compatibility, ideal for repeatable microscopy workflows — order via Metav Werkzeuge or request tailored advice from our consultants. DX.9501-L left-handed microscope stage with Gorilla Glass and specimen holder — Euromex The DX.9501-L is a left-handed microscope stage engineered for precise sample positioning, featuring a Gorilla Glass work surface, a central aperture for transmitted light and an integrated specimen holder for stable handling. Gorilla Glass work surface for scratch resistance Left-handed layout for ergonomic handling Integrated specimen holder and aperture for illumination Robust mounting for stable positioning Durable surface for dependable sample handling The stage is fitted with a Gorilla Glass top that combines high hardness with excellent optical clarity; this surface reduces wear and is scratch resistant, so samples remain flat and visible over prolonged use. For routine inspection tasks, the durable top lowers maintenance requirements and extends service intervals, which supports steady throughput in busy laboratories. The material’s optical stability also helps to maintain consistent image quality when used with transmitted or reflected illumination. Ergonomic left-handed configuration to streamline workflows A left-handed layout positions controls and the specimen holder to suit left-handed operation, improving ergonomic access and reducing repositioning time during repetitive tasks. In workstations where left-handed handling is the norm, this orientation supports smoother sample exchange and faster processing. The design emphasises efficient handling while preserving precise alignment, so handling speed is increased without compromising positional accuracy. Secure specimen fixation and illumination compatibility An integrated specimen holder secures slides and small samples while the central aperture provides compatibility with transmitted-light setups; this enables brightfield or other illumination techniques to be used without additional modifications. The mounting is engineered for stable positioning, limiting sample drift during inspection and ensuring reproducible observation conditions. For applications that require quick changeovers and consistent sample presentation, the combination of holder and aperture reduces setup time and improves data reliability. Contact Metav Werkzeuge for tailored advice on integrating the DX.9501-L into existing microscope stations, or request detailed technical information by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: DX.9501-L SKU: DX.9501-L Manufacturer: Euromex Facts Image file size: 93995 Special features Gorilla Glass work surface Central hole / aperture for transmitted light Integrated specimen holder Left-handed configuration Microscopy accessory: microscope stage FAQ Is the stage suitable for transmitted-light microscopy? The DX.9501-L includes a central aperture specifically to permit transmitted-light methods, making the stage compatible with brightfield illumination setups. Can the left-handed stage be used in a right-handed workstation? The stage is designed for left-handed operation; while it can be installed in a right-handed workstation, the ergonomic benefits will be reduced compared with a right-handed configuration. What advantage does Gorilla Glass provide for a microscope stage? Gorilla Glass offers high hardness and optical clarity, providing a scratch-resistant and stable contact surface that supports repeatable imaging and reduces maintenance. Is the specimen holder adjustable for different slide sizes? The integrated specimen holder is intended for secure fixation of standard slides and small samples; adjustability details should be confirmed with Metav Werkzeuge for specific sample types. Who supplies technical information and spare parts for this stage? Technical enquiries and spare-part information can be obtained from Metav Werkzeuge, which provides product guidance and ordering support for microscopy accessories. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Microscope Stage With Gorilla Glass, Sample Holder, Right-Hand - Euromex
Data inconsistency: the product specifies "Euromex" as the manufacturer, but this brand is not included in the authorised manufacturer list provided, which raises concerns about the accuracy and validity of the information supplied for this product. We are unable to generate a compliant product description due to this discrepancy, as it is essential to ensure all details align with the approved standards and regulations. Please supply a manufacturer from the approved list or correct the manufacturer information so the description can be produced accurately and in compliance with the necessary guidelines, ensuring the product meets all required specifications and standards for approval.
150mm Microscope Stage With PID Heater Up To 50°C, For New Stereomicroscopes - Euromex
Combining precise PID temperature control with compatibility for stereo microscopes, this heated stage delivers stable sample conditions up to 50 °C; order directly via Metav Werkzeuge or contact our consultants for integration advice. Euromex AE.5168-NZ — microscope stage with PID-controlled heating up to 50 °C Euromex AE.5168-NZ is a heated microscope stage designed for integration with stereo microscopes, providing regulated warming for temperature-sensitive specimens. PID-controlled temperature stability up to 50 °C Integrated design for stereo microscopes Supplied only with new microscopes SKU AE.5168-NZ for straightforward identification Controlled temperature for consistent imaging quality The stage features a PID controller that actively monitors and adjusts heating to maintain a set temperature, ensuring stable conditions throughout prolonged observations. Maintaining a stable sample temperature reduces focal drift and dimensional changes that can compromise high-magnification imaging. The regulated heating, specified to reach 50 °C, is particularly useful when handling materials or biological samples that require a defined thermal environment to prevent condensation, stress-induced distortion or measurement errors. The regulated heat output is described in clear, comparable terms so planners and technicians can assess suitability for their workflows. Engineered for seamless integration with stereo microscopes Designed specifically as a microscope stage for stereo microscopes, the unit is intended to be supplied together with new microscope assemblies rather than as an aftermarket retrofit. This approach guarantees mechanical and electrical compatibility at installation and reduces commissioning time. The compact configuration simplifies alignment and preserves the optical working distance typical for stereo systems. Because the stage arrives pre‑matched to the instrument, commissioning is straightforward and thermal coupling is optimised for reliable performance during routine inspection and precision tasks. Practical advantages for laboratory and production use Beyond temperature control, the stage supports reproducible working conditions that aid process control and quality assurance. By keeping environmental variables more stable, the stage helps to shorten set-up times and minimise rework caused by thermally induced positional changes. The integrated heating is valuable where repeatable imaging or assembly under controlled warmth speeds adhesive curing or reduces brittle behaviour in certain polymers. The engineering focus on stability and compatibility makes this solution appropriate for inspection benches in research, quality control and small-series production environments. Contact Metav Werkzeuge for detailed configuration options or to arrange supply alongside compatible new microscopes — our specialists in Emmerich can advise on integration and order processing. Technical data Article number: AE.5168-NZ SKU: AE.5168-NZ Brand: Euromex Product type: Microscope stage Facts Max. temperature: 50 °C Temperature control: PID regulator Intended for: Stereo microscopes Special features Supplied only with new microscopes Integrated design for direct installation Compact heated stage for stable imaging FAQ Is this stage compatible with older microscopes? The AE.5168-NZ stage is supplied only with new microscopes and is not offered as a separate retrofit for older instruments. What temperature control does the stage provide? The AE.5168-NZ includes a PID-controlled heater with a maximum temperature of 50 °C for precise thermal regulation. How does the PID controller improve imaging results? Using the PID regulator, the AE.5168-NZ maintains set temperatures with minimal overshoot and rapid stabilisation, reducing thermal drift and improving repeatability in measurements and inspections. For which microscope types is the stage intended? The stage is designed specifically for stereo microscopes and is supplied as part of new stereo microscope assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Modular Illumination Station 2x3W Gooseneck, 4W LED Ring, 2W Transmitted LED, Ø21–61mm Mounting - Euromex
Take advantage of a modular lighting concept, high‑intensity ring illumination and flexible gooseneck spotlights for consistent sample visualisation in routine inspection or documentation; order the unit directly via Metav Werkzeuge or consult their specialists for configuration advice. Modular Illumination Station LE.5212-420 — Microscope lighting station with 60‑LED ringlight and flexible gooseneck arms (Euromex) The Modular Illumination Station LE.5212-420 is an adaptable cold‑light solution for microscopy and workstation inspection, suitable for standalone use or for mounting on microscope columns. Modular mounting up to Ø44 mm 60‑LED ringlight, 24,000 lx, 6,500 K Two 56 cm gooseneck spotlights (420 nm) Adapter rings 35 mm and 25 mm Precise, high‑contrast illumination for reliable inspection The modular design provides concentrated, adjustable light where it is needed, making visual inspection and photographic documentation more reliable. The central LED ringlight delivers 24,000 lx at 6,500 K using 60 LEDs, producing even, shadow‑free top illumination that improves contrast on textured or reflective samples. For thin or translucent specimens, the dedicated transmitted light module offers 8,000 lx from 42 LEDs and a solid light plate (Ø 94.5 mm, 15 mm thick) to ensure uniform backlighting. These specifications help standardise workflow outcomes and reduce rework caused by poor visibility. Flexible positioning and secure mounting for varied workflows Flexible gooseneck arms (56 cm) with a focusing head containing three lenses enable targeted accent lighting and easy focusing on small details. The station can be used independently or attached to microscope posts up to Ø 44 mm, while the ringlight accepts a mounting diameter of 21–61 mm; adapter rings (35 mm and 25 mm) expand compatibility with a wide range of objectives and camera adapters. This combination of reach and secure attachment reduces setup time and supports consistent repeatability in production, inspection and laboratory environments. Modular accessories and simple adaptation to applications The unit’s modular architecture allows the exchange of light arms and the addition of a screw‑on polarisation filter, increasing control over glare and reflections on shiny surfaces. Interchangeable accessories (LE.5260–LE.5264) extend functionality without requiring a complete replacement, supporting a long service life and predictable upgrade paths. As a compact lighting station, it supports diverse tasks from routine quality checks to documentation, while maintaining an ergonomic footprint on the workbench. Contact Metav Werkzeuge for tailored configuration advice and rapid supply of the LE.5212-420 from Emmerich’s central quality hub Technical Data Article number: LE.5212-420 SKU: LE.5212-420 Brand: Euromex Product type: Microscope lighting station Core technical data 2 x 3 W gooseneck illumination, 420 nm 4 W LED ringlight 2 W LED transmitted light Ringlight: 60 LEDs, 6,500 K, 24,000 lx, mounting Ø 21–61 mm Transmitted light: 42 LEDs, 6,500 K, 8,000 lx; light plate Ø 94.5 mm, 15 mm thick Gooseneck arms: 56 cm; focusing head with three lenses Mounting: for microscope posts up to Ø 44 mm; adapter rings 35 mm, 25 mm Special features Modular design for standalone use or column mounting Interchangeable light arms and screw‑on polarisation filter (LE.5260–LE.5264) Adapter rings for expanded compatibility Suited to inspection, documentation and sample preparation FAQ What mounting options are available for the station? The LE.5212-420 supports standalone use or mounting on microscope posts up to Ø 44 mm and accepts a ringlight mounting diameter of 21–61 mm; adapter rings 35 mm and 25 mm are included. What are the light intensity and colour temperature of the ringlight? The Euromex ringlight provides 24,000 lx at a colour temperature of 6,500 K using 60 LEDs for balanced, daylight‑neutral illumination. Can polarisation be added to reduce reflections? Yes — the modular design accepts a screw‑on polarisation filter and interchangeable light arms; compatible accessories include LE.5260 to LE.5264. Is the station suitable for transmitted‑light applications? The unit includes a transmitted light module with 42 LEDs, 6,500 K and approximately 8,000 lx, plus a robust light plate (Ø 94.5 mm, 15 mm thick) for uniform backlighting. Are the gooseneck arms adjustable for precise positioning? The gooseneck arms measure 56 cm and feature a focusing head with three lenses, allowing targeted, stable positioning for close‑up work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Modular Illumination Station LED Ring And Gooseneck Lights, 6500 K - Euromex
Take advantage of the modular design and high‑output LED illumination to ensure consistent, daylight‑balanced lighting for inspection tasks; the combination of adjustable goose‑neck arms, a powerful 60‑LED ringlight and a dedicated transmitted light plate supports both surface and translucent samples. Order directly via Metav Werkzeuge or consult our technical advisers for mounting options and accessory selection. Modular Illumination Station LE.5212 — Modular microscope lighting with goose‑neck arms and 60‑LED ringlight (Euromex) A Modular Illumination Station LE.5212 designed for standalone use or secure mounting on microscope columns up to Ø 44 mm, offering versatile illumination options for laboratory inspection, assembly and quality control. Modular mounting for microscope columns Ø 44 mm Two 56 cm goose‑neck arms with focus head 60‑LED ringlight: 24,000 lx at 6,500 K Transmitted light plate Ø 94.5 mm, 8,000 lx Consistent, daylight‑balanced illumination for reliable inspection The lighting module delivers a balanced 6500 K white light spectrum, chosen to approximate daylight and improve colour rendition during visual inspection and imaging. With a 60‑LED ringlight producing up to 24,000 lx, reflected details become clearer and contrasts are enhanced, reducing the need for repeated adjustments. The station is therefore suited to tasks where colour accuracy and repeatability matter, such as electronics inspection, materials analysis or precision assembly. The integrated transmitted light option, rated at 8,000 lx, supports examination of semi‑transparent specimens and thin sections, offering a versatile lighting setup in one compact unit. Flexible positioning and precise beam control for ergonomic workflows Two flexible goose‑neck arms of 56 cm length combine reach with stability, allowing the light heads to be positioned precisely without tools. The focus head with three lenses enables targeted control of beam sharpness and spot size, which helps to isolate critical areas without creating distracting glare on surrounding surfaces. This ergonomic flexibility reduces operator fatigue and shortens setup time, making the unit valuable for repetitive inspection cycles or workstation sharing where quick reconfiguration is required. Modular mounting and straightforward integration into existing equipment Designed for mounting on microscope columns with a maximum diameter of Ø 44 mm, the station includes adapter rings (35 mm and 25 mm) for compatibility with a broad range of stands. The option to use the system either standalone or fixed to a post means it integrates neatly into both bench‑top and column‑based setups. For facilities aiming to centralise equipment without replacing existing microscopes, this modular approach minimises downtime and supports incremental upgrades while preserving previous investments. Expandable accessories for reflection control and enhanced contrast Optional accessories (LE.5260–LE.5264) include interchangeable light arms and screw‑on polarisation filters, giving control over reflections and surface glare where needed. The ringlight’s mounting diameter range of 21–61 mm supports a variety of objective and camera housings, while the robust light plate (Ø 94.5 mm, 15 mm thick) provides an even base for transmitted illumination. These options make the lighting module future‑proof for evolving inspection requirements and allow optimisation for specific materials or surface finishes. For tailored advice on mounting the Euromex LE.5212 and compatible accessories, contact Metav Werkzeuge for direct supply and technical support from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LE.5212 SKU: LE.5212 Brand: Euromex Product type: Microscope illumination station Core specifications Goose‑neck lighting: 2 × 3 W, white light 6500 K Ringlight: 4 W, 60 LEDs, 6500 K, 24,000 lx Transmitted light: 2 W, 42 LEDs, 6500 K, 8,000 lx Ringlight mounting diameter: 21–61 mm Light plate: Ø 94.5 mm, 15 mm thick Goose‑neck arm length: 56 cm Special features Modular for standalone use or mounting on microscope columns up to Ø 44 mm Adapter rings: 35 mm and 25 mm Focus head with three lenses Accessories LE.5260–LE.5264: interchangeable arms / screw‑on polarisation filter Suitable for reflected and transmitted illumination workflows FAQ What mounting options are available for the LE.5212? The Euromex LE.5212 can be used standalone or mounted on microscope columns up to Ø 44 mm; adapter rings of 35 mm and 25 mm are included for additional compatibility. How bright is the ringlight and what colour is the light? The ringlight delivers up to 24,000 lx at a colour temperature of 6500 K, providing a cool, daylight‑balanced illumination ideal for accurate colour assessment. Can the station be adjusted for fine‑detail work? Yes, the two 56 cm goose‑neck arms and the focus head with three lenses allow precise positioning and beam focusing to highlight small features without disturbing adjacent areas. Are there options to reduce reflections on shiny samples? Interchangeable accessories (LE.5260–LE.5264) include screw‑on polarisation filters, which can significantly reduce surface reflections and improve contrast on reflective materials. Is the unit suitable for both surface inspection and thin specimens? The combination of reflected lighting (ring and goose‑necks) and a transmitted light plate (Ø 94.5 mm, 8,000 lx) supports inspection of opaque surfaces and semi‑transparent samples alike. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Object Table With Sapphire Glass, Hole And Specimen Holder, Right-Hand - Euromex
Take advantage of the sapphire-glass surface and the integrated specimen holder to improve sample stability and inspection speed; order the stage directly via Metav Werkzeuge or consult our specialists for technical clarification. DX.9504-R Microscope Stage — Sapphire glass, right-handed specimen holder by Euromex The DX.9504-R is a right-handed microscope stage with sapphire glass, a central aperture and an integrated specimen holder, designed for stable sample positioning during routine microscopy tasks. Sapphire glass stage surface Integrated specimen holder Central aperture (hole) Right-handed configuration Durable surface for long-term precision The sapphire-glass stage surface is chosen for its wear resistance and smooth finish, reducing scratches and maintaining a clear viewing plane over extended use. A hard viewing surface minimises contamination traps and simplifies cleaning routines, which supports consistent optical performance and lowers maintenance effort. The result is a reliable inspection base that preserves alignment and focus stability for longer runs, contributing to process reliability in laboratory and workshop settings. Stable sample handling to speed inspection An integrated specimen holder secures the sample in a predictable position, reducing time spent on repositioning and refocusing. The built-in aperture (hole) allows light transmission where required and keeps the sample accessible for transmitted illumination setups. These mechanical features translate into fewer interruptions in the workflow and more reproducible measurement conditions, which is particularly valuable for repetitive quality-control tasks and documentation procedures. Workflow-friendly design for routine microscopy The right-handed layout is configured for ergonomic operation in standard bench setups, enabling faster manipulation and less handling stress for right-oriented users. The stage is intended for use with microscopes and complements standard microscopy mounts, offering a compact and practical solution for laboratories and technical workshops. The Euromex construction emphasises functional simplicity and longevity, supporting dependable day-to-day inspection and sample preparation. Choose the Euromex DX.9504-R for a robust, low-maintenance microscope stage and contact Metav Werkzeuge in Emmerich for availability and expert purchasing advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.9504-R Manufacturer: Euromex Product type: Microscope stage SKU: DX.9504-R Data Image file size: 94419 Special features Sapphire glass surface Hole / aperture Specimen holder Right-handed orientation FAQ What is the surface material of the stage? The stage uses a sapphire glass surface, providing a hard, smooth viewing plane for long-term use with the DX.9504-R stage from Euromex. Does the stage include a hole for illumination? The stage includes a central aperture (hole) that accommodates transmitted-light arrangements and supports flexible illumination setups. Is this stage suitable for left-handed users? The DX.9504-R is configured in a right-handed layout; left-handed operation would require a differently orientated stage or a left-handed variant. How does the specimen holder affect sample stability? The integrated specimen holder secures the sample position to reduce repositioning and improve reproducibility during inspections with the microscope stage. For which equipment is this stage intended? The stage is intended for use with microscopes and serves as a replacement or upgrade stage for standard laboratory and workshop microscopy applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Stage With Sapphire Glass, Aperture And Specimen Holder, Left-Hand - Euromex
Take advantage of a sapphire-glass stage for long-lasting clarity and the integrated through‑hole and specimen holder for reliable transmitted-light work; the left‑handed layout supports specialised workflows. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. DX.9504-L Microscope Stage — Sapphire glass, left‑handed configuration (Euromex) The DX.9504-L is a left‑handed microscope stage designed for precise sample positioning, featuring a sapphire-glass surface, a central through‑hole for transmitted illumination and a secure specimen holder. Sapphire-glass stage for scratch resistance and clarity Integrated through‑hole for transmitted-light setups Specimen holder for secure sample fixation Left‑handed layout for specialised workflows Enhanced longevity and clearer imaging for routine use The use of sapphire glass on the stage delivers superior scratch resistance and a consistently smooth surface that preserves optical clarity over time. A wear‑resistant stage reduces the need for frequent replacement and minimises maintenance interruptions in laboratories and teaching environments. This durability translates into dependable image quality and lower lifetime operating costs, supporting uninterrupted inspection and documentation tasks. Reliable transmitted‑light imaging and secure sample handling An integrated through‑hole enables straightforward use with transmitted‑light microscopes, while the dedicated specimen holder keeps samples stable during adjustment and observation. Together these features simplify alignment and reduce repositioning time, increasing throughput for repetitive examinations. The left‑handed configuration adapts to specific bench layouts or operator preferences, making instrument setup more ergonomic in constrained workspaces. Versatile accessory for labs, education and inspection workflows As a compact microscope stage, the unit suits routine laboratory work, educational settings and industrial inspection where secure handling and illumination flexibility are priorities. The model DX.9504-L from Euromex integrates directly with many standard stands and optical arrangements, providing a pragmatic upgrade path for benches that require improved sample control or enhanced transmitted-light capability. For further technical details or compatibility questions, specialist advice is available to ensure the stage meets the planned application and downstream measurement needs. Choose the Euromex DX.9504-L for robust handling and precise transmitted‑light imaging — contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: DX.9504-L SKU: DX.9504-L Manufacturer: Euromex Product type: Microscope stage Facts Gallery file size: 93995 Gallery filename: DX.9504-L.jpg Special features Sapphire glass stage Through‑hole for transmitted light Specimen holder Left‑handed configuration For microscopes FAQ What materials are used for the stage surface? The stage surface is made with sapphire glass, chosen for the DX.9504-L to provide high scratch resistance and durable optical clarity. Can the stage be used with transmitted‑light microscopes? Yes. The integrated through‑hole on the DX.9504-L accommodates transmitted‑light arrangements and facilitates even illumination for transparent samples. How does the specimen holder improve handling? The specimen holder secures samples during adjustment and observation, reducing movement and improving repeatability for inspection routines on the Euromex stage. Is the left‑handed configuration compatible with standard microscope stands? The left‑handed layout is designed to fit most standard stands while providing an ergonomic alternative for specific bench setups; compatibility checks are advised for bespoke systems. Is this stage suitable for educational and industrial use? Yes. The DX.9504-L combines durable materials and practical features that make it appropriate for both teaching environments and light industrial inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Stereo Microscope EduBlue ED.4300, Carry Case Compatible - Euromex
The supplied product data contains contradictory information and cannot be rendered as a reliable product description. The entry is simultaneously described as a stereomicroscope (EduBlue ED.4300, SKU ED.4300) and as an aluminium transport case for EduBlue microscopes, while the category places it under transport cases. These inconsistencies prevent accurate translation and specification: it is unclear whether the item to be presented is the microscope itself or an accessory case, and essential technical details for either object are missing or confounded. Please confirm which product is correct (stereomicroscope or transport case), supply the definitive product type and relevant technical fields, and remove any conflicting records so a full, consistent description can be produced. For clarification or to submit corrected data, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com