18mm Wide Field 10x Microscope Eyepiece With Pointer - Euromex
Wide, comfortable viewing at 10× magnification with an 18 mm field number supports efficient specimen scanning; the integrated pointer eases orientation during teaching and routine inspection. Take advantage of dependable Euromex optics and a compact accessory that fits standard microscopes. Order the MicroBlue MB.6010 directly via Metav Werkzeuge or ask our consultants if needed. MicroBlue MB.6010 — Wide‑field 10× microscope eyepiece by Euromex MicroBlue MB.6010 is a wide‑field microscope eyepiece designed for clear, comfortable observation in teaching, laboratory and inspection environments. Wide field 18 mm field number 10× magnification for detailed observation Built-in pointer for easy specimen marking Larger field of view for faster specimen scanning A wide‑field eyepiece with an 18 mm field number provides a noticeably broader visible area than standard oculars. The field number describes the diameter of the viewable image at the eyepiece: a higher value means more of the specimen is visible without moving the stage. For routines such as slide screening, teaching demonstrations or quality checks, this translates into fewer adjustments and a more efficient workflow. The broader field also reduces eye fatigue during extended sessions by offering a more natural viewing window. Precise 10× magnification that works with objectives The eyepiece supplies 10× magnification, which combines with the chosen objective lens to determine overall magnification. This arrangement allows familiar control over image size while preserving optical clarity. For users less familiar with microscopy, the concept is simple: the eyepiece multiplies the objective’s power, so pairing a 10× ocular with a 40× objective results in a 400× total magnification. The design focuses on delivering a sharp, stable image rather than adding unnecessary complexity, making it suitable for education, laboratory checks and routine inspections. Integrated pointer for clear orientation and teaching An integrated pointer inside the eyepiece provides a practical aid for locating or highlighting specific features on a slide. In educational settings the pointer supports quick demonstration of structures; in inspection tasks it simplifies documentation and communication between operators. The pointer is a direct, low‑technology solution that reduces the need for annotation on digital captures and facilitates faster decision making during microscopy work. Trusted optics for everyday microscopy tasks Originating from the MicroBlue series, this eyepiece reflects Euromex’s experience in microscope accessories and is aimed at users who require reliable visual performance without excessive complexity. The component is compact and intended to fit standard eyepiece tubes used in many educational and industrial microscopes. The emphasis is on straightforward functionality: notable optical clarity, a wide field, and a functional pointer that together streamline inspection and instruction. For bespoke compatibility checks or additional specifications, technical advisors are available to provide the required details. Contact Metav Werkzeuge for detailed compatibility advice and to arrange supply of the Euromex MicroBlue MB.6010 eyepiece; Metav’s consultants can confirm fitment and delivery from Emmerich. Technical data Article number: MB.6010 SKU: MB.6010 Brand: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field number: 18 mm Special features Wide field (WF) design Integrated pointer MicroBlue series For microscopes FAQ What magnification does this eyepiece provide? The MicroBlue MB.6010 eyepiece provides 10× magnification, which multiplies the objective lens to give the final magnification used in observation. What does an 18 mm field number mean in practice? An 18 mm field number indicates a wide visible diameter through the eyepiece, allowing more of the specimen to be seen without moving the stage and reducing the need for frequent repositioning. Is the pointer suitable for teaching demonstrations? Yes, the integrated pointer in the MicroBlue MB.6010 is intended precisely for orientation and demonstration, making it useful in teaching and collaborative inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Wide Field Eyepiece WF 10x/18mm, Wide Field - Euromex
Take advantage of a 10x optical step combined with a wide-field 18 mm field number to speed up visual inspection and reduce slide repositioning; the result is more efficient observation and steadier documentation. Order the eyepiece directly via Metav Werkzeuge or ask the consultants for specification advice. Microscope eyepiece AE.5572 — 10x wide-field eyepiece by Euromex (18 mm) Microscope eyepiece AE.5572 is a wide-field 10x ocular designed for general microscopy and educational or routine inspection tasks, offering an extended 18 mm field number for broader sample coverage 10x magnification Wide-field: 18 mm field number Part number AE.5572 Faster overview for routine inspection and teaching The combination of 10x magnification and a wide-field optical design substantially increases the visible sample area per glance, which reduces the need for frequent stage movement during inspections. The 18 mm field number describes the diameter of the exit pupil and therefore the size of the observable field at the eyepiece; a larger field number means more of the specimen is visible without scanning. This advantage translates directly into time savings in repetitive workflows and more comfortable observation during extended sessions in laboratories and classrooms. Clearer image interpretation for documentation and measurement A wide-field ocular improves situational awareness when documenting features or making comparative measurements under the microscope. By increasing the apparent field, the eyepiece supports faster orientation on slides and helps the operator keep reference structures in view while switching objectives. The eyepiece is manufactured by Euromex, delivering consistent optical characteristics that aid in reproducible visual assessment and clearer photographic capture when paired with appropriate camera adapters. Practical specification for integration into inspection setups The eyepiece provides a straightforward specification for procurement and inventory: 10x magnification with an 18 mm field number, referenced under the internal part AE.5572. This simple, standardised specification assists engineers and technicians in selecting compatible optics for routine inspection benches and teaching microscopes, enabling predictable results across multiple instruments. The design supports efficient workflows and reduces time spent on operator training by offering familiar magnification and a generous viewing field. For supply and expert advice on integrating the Euromex AE.5572 eyepiece into metrology or teaching setups, contact Metav Werkzeuge for order placement and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: AE.5572 SKU: AE.5572 Type: Microscope eyepiece Manufacturer: Euromex Facts Magnification: 10x Field number: 18 mm Special features Wide-field design WF 10x/18 mm Source: Education PDF — p.13 FAQ What does the 18 mm field number mean for observation? The 18 mm field number indicates the diameter of the eyepiece’s exit pupil and therefore the width of the visible field; with the AE.5572 this provides a broader view that reduces the need to move the specimen during inspection. Which magnification is provided by this eyepiece? The eyepiece delivers 10x magnification, suitable for general observation and as a complement to standard objective lenses in teaching and routine inspection environments. Is this eyepiece suitable for educational laboratories? Yes, the wide-field characteristic and standard 10x magnification make the AE.5572 well suited to teaching microscopy and training scenarios where a larger apparent field improves orientation and ease of use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1x C-Mount Photo Adapter for Oxion Revision 2, 1x Magnification - Euromex
The compact C‑mount interface and 1x magnification ensure seamless digital imaging in existing Oxion setups; robust construction supports reliable integration in routine inspection workflows. Order via Metav Werkzeuge or contact the consultants for tailored advice. C-mount 1x Photo Adapter for Oxion (Revision 2) OX.9810 — Euromex C‑mount camera adapter with 1x magnification A C-mount 1x Photo Adapter for Oxion (Revision 2) that adapts Oxion microscopes to a standard C‑mount camera connection for straightforward imaging and documentation in laboratory and workshop environments. Standard C‑mount interface 1x magnification for faithful reproduction Compatible with Oxion Revision 2 systems Compact, lightweight camera adapter Precision integration for inspection workflows The C‑mount interface provides a standardised mechanical and optical connection that simplifies camera attachment and alignment. With 1x magnification, the adapter transmits the microscope image to the camera without additional scaling, which preserves the native field of view for measurement, documentation or quality assurance tasks. This results in consistent image reproduction across inspections and reduces the need for corrective image processing. The accessory is engineered for straightforward mechanical fitment with the Oxion Revision 2 series, enabling fast setup in busy metrology and microscopy workflows while maintaining reliable optical coupling. Practical compatibility and straightforward installation Designed as a dedicated camera adapter, the component matches the Oxion optical path and secures a repeatable connection between microscope and camera. The revision-specific design ensures mechanical alignment and optical registration with the instrument’s image plane. Installation requires only standard mounting of a C‑mount camera to the adapter and seating the assembly into the Oxion camera port, which keeps downtime low and integration effort minimal. Where further clarification is required, technical assistance is available; Metav Werkzeuge can provide specifications and integration advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Why this adapter suits workshop and laboratory environments For industrial inspection, research or documentation, reliable camera coupling is essential. This Euromex adapter delivers a compact solution that reduces mechanical play and secures stable alignment during repeated use. The 1x configuration preserves the microscope’s native imaging characteristics, which is especially useful when measurements or calibrated imaging are required. Being a purpose-built accessory for Oxion Revision 2, the adapter contributes to predictable results and repeatable imaging, supporting efficient routines in production control and research labs alike while minimising setup complexity. Contact Metav Werkzeuge today to arrange procurement of the Euromex OX.9810 C‑mount 1x photo adapter and receive personalised integration support from the Emmerich team. Technical Data Article number: OX.9810 SKU: OX.9810 Manufacturer: Euromex Product type: Microscope camera adapter Data Magnification: 1x Special features C‑mount interface Compatible with Oxion (Revision 2) Photoadapter for camera attachment Gallery image available (OX.9810.jpg) FAQ Is this adapter compatible with Oxion Revision 2 microscopes? Yes. The C‑mount 1x Photo Adapter for Oxion (Revision 2) OX.9810 is specifically designed for mechanical and optical compatibility with Oxion Revision 2 systems. What magnification does the adapter provide to the camera? The accessory provides 1x magnification, transferring the microscope image to the camera without additional optical enlargement. Can the adapter be used with any C‑mount camera? The adapter uses a standard C‑mount thread, so it is suitable for cameras that accept a C‑mount connection; sensor size and camera settings should be verified for the intended imaging task. Will the adapter affect measurement accuracy when used for metrology? When mounted correctly, the 1x adapter preserves the native field of view and geometry of the microscope optics, supporting repeatable imaging suitable for documentation and measurement procedures. Where can additional technical data or installation guidance be obtained? Further specification details and installation guidance can be requested from Metav Werkzeuge; reference the Euromex OX.9810 for a prompt response. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1x C-Ring Adapter With 1x Objective, 1x Magnification - Euromex
Take advantage of the C-ring design and 1x magnification for reliable, true-to-scale image capture; the secure coupling and standard C-mount compatibility ensure fast integration into inspection and documentation workflows. Order via Metav Werkzeuge or consult our specialists for system pairing and compatibility advice. C-Ring-Adapter with 1x Objective DZ.9013 — Euromex microscope camera adapter The C-Ring-Adapter with 1x Objective DZ.9013 is a precision microscope camera adapter intended to couple C-mount cameras to microscopes for faithful image reproduction and straightforward photographic documentation C-ring design for secure camera coupling 1x magnification for true-to-scale imaging Compatible with standard C-mount cameras Accurate imaging that preserves scale for documentation The 1x magnification specification provides true-to-scale imaging, which is particularly valuable where dimensional fidelity matters for documentation or metrology. By transmitting the specimen image at the same scale as the optical path, the adapter removes the need for complex in-software rescaling and simplifies downstream measurement routines. This makes the component suitable for laboratory record-keeping, quality-control photography and any application where image-based comparison to a physical standard is required. The clear technical specification supports predictable integration into measurement workflows. Secure mechanical coupling for uninterrupted operation The C-ring construction delivers a secure physical interface between camera and microscope, reducing the risk of misalignment and image shift during handling. Mechanical stability directly reduces setup time and minimises rework caused by loose connections, supporting continuous operation on inspection benches or in teaching laboratories. Compatibility with C-mount camera bodies ensures wide device interoperability and avoids the need for bespoke adapters, increasing system flexibility and lowering the total effort for equipment setup. Simple integration into existing optical systems Designed for straightforward assembly, the adapter enables rapid connection of camera hardware to microscope tubes that accept C-ring or C-mount interfaces. The model DZ.9013 from Euromex is compact and intended for technicians who require a robust, low-complexity solution to add digital imaging to established optical rigs. Where calibration or specific camera sensors are required, the adapter functions as a passive optical interface; any final image calibration remains with the camera and software. For bespoke system matching or clarification of physical dimensions, Metav Werkzeuge can advise on compatibility and camera pairing. For configuration support or to discuss camera compatibility, contact Metav Werkzeuge – call +49 2822 7131930 or email info@metav-werkzeuge.com to request advice on the DZ.9013 and suitable C-mount camera pairings. Technical Data Article number: DZ.9013 SKU: DZ.9013 Brand: Euromex Product type: Microscope camera adapter Facts Magnification: 1x Mount type: C-ring / C-mount Category: C-Mount (microscopy accessory) Special features C-ring adapter with 1x objective Intended for camera-to-microscope coupling Suitable for imaging and documentation workflows FAQ Is this adapter compatible with standard C-mount cameras? Yes. The adapter is designed as a C-ring solution and is compatible with standard C-mount camera bodies for straightforward coupling to microscopes. What does 1x magnification mean for imaging and measurement? A 1x specification indicates true-to-scale imaging through the adapter when used within the microscope optical path, helping to preserve spatial accuracy for documentation and measurement tasks. Can the adapter be used for laboratory documentation and quality control imaging? Yes. The DZ.9013 supports image capture workflows where scale fidelity and a stable camera mount are required, making it suitable for laboratory documentation and inspection photography. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Plan PLMi 100x/0.90 IOS Objective Infinity Corrected No Cover Glass Correction - Euromex
Take advantage of the combination of high magnification, a wide 0.90 numerical aperture, and a short 2 mm working distance for detailed, high‑resolution imaging; order this objective via Metav Werkzeuge or consult our specialists for compatibility advice. Plan PLMi 100x/0.90 IOS Objective IS.8100 — Infinity‑corrected 100×, 2 mm working distance by Euromex The Plan PLMi 100x/0.90 IOS Objective IS.8100 is an infinity‑corrected microscope objective designed for demanding high‑magnification applications that require a flat field and precise optical performance with a 2 mm working distance. 100× magnification and high NA Infinity‑corrected optics for modern microscopes Short 2 mm working distance for fine detail Exceptional resolution where it matters The objective delivers 100× magnification combined with a 0.90 numerical aperture, which together enable high resolving power that brings sub‑micrometre structures into clear view. The Plan design ensures a flat field across the image, reducing edge curvature and simplifying image stitching or digital analysis. These optical properties translate into reliable image quality for inspections, documentation and research tasks where fine detail is critical. Designed optics explained for practical use This lens is infinity‑corrected, meaning the objective projects parallel light to a tube lens in the microscope stand; the result is modular compatibility with modern microscope systems and stable aberration control. The specification no cover glass correction indicates the objective is not optimised for a fixed cover slip thickness—this affects how the lens is employed in sample preparation and may require adjustment of mounting technique. The short 2 mm working distance permits close approach to the specimen, improving numerical aperture utilisation but necessitating careful handling during sample loading. Integration, traceability and application fit As a microscope accessory classified under microscope objectives, the part is supplied under SKU IS.8100 by Euromex, offering consistent manufacturing and labelling for inventory control. The combination of Plan correction and strong numerical aperture makes this objective appropriate for high‑detail tasks such as material surface inspection, fine biological imaging and micro‑fabrication quality checks. For installations where tube‑lens focal length or condenser configuration must be verified, technical consultation is recommended to ensure optical alignment and to avoid unexpected aberrations. Contact Metav Werkzeuge for tailored advice on integrating the Euromex IS.8100 into existing microscopes and to confirm compatibility with specific tube‑lens systems — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: IS.8100 SKU: IS.8100 Product type: Microscope objective Manufacturer: Euromex Data Magnification: 100× Numerical aperture: 0.90 Working distance: 2 mm Special features Infinity‑corrected optics No cover glass correction Plan PLMi design Category: For microscopes FAQ What magnification and numerical aperture does this objective provide? The objective offers 100× magnification with a 0.90 numerical aperture, delivering high resolving power for fine structural detail. Is this objective corrected for a cover glass? No — the specification states no cover glass correction, so optimal results require consideration of sample mounting and cover slip usage. What does infinity‑corrected mean for system setup? Infinity‑corrected optics require a compatible tube lens in the microscope stand; the Plan PLMi 100x/0.90 IOS Objective IS.8100 is designed to work with such systems for modular optical correction. Can this objective be used for material inspection as well as biological samples? Yes — the high numerical aperture and Plan correction suit applications in both materials inspection and fine biological imaging where high resolution and a flat field are needed. Which SKU should be ordered for inventory and procurement? The order reference is IS.8100, listed under Euromex microscope objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.0x Attachment Lens Not Suitable For S Stands, 2.0x Magnification - Euromex
Take advantage of the 2.0× magnification and compact attachment design to extend inspection capability on existing stereo optics; suited for rapid visual checks in production and quality assurance. Order the accessory via Metav Werkzeuge or consult our specialists for fit verification and application advice. 2.0× attachment lens NZ.8920 – Euromex stereomicroscope accessory with 2.0× magnification, not suitable for S-type stands A 2.0× attachment lens NZ.8920 for stereomicroscopes that doubles system magnification for closer inspection tasks while remaining a compact, easy-to-fit optical accessory. 2.0× magnification boost for stereomicroscopes Designed as a compact attachment lens Not compatible with S-type stands Euromex quality, SKU NZ.8920 Double the detail for routine inspections The main benefit of the 2.0× attachment is its straightforward magnification gain: when mounted to a compatible stereo optical head, the optical system delivers a clear enlargement that supports faster identification of small features during visual inspection. This converter is designed to act as an attachment lens rather than a standalone objective, so it modifies the existing optical train to increase working magnification without altering the core microscope. For workshop and production environments this means inspections that previously required higher-power optics can often be carried out with the standard stereomicroscope plus this accessory, reducing instrument changeovers and keeping process flow smoother. The effect on field of view and working distance is the usual optical trade-off when increasing magnification; these changes should be considered when integrating the accessory into established inspection routines. Seamless fit with stereo optics and clear compatibility limits Specified for use with stereomicroscopes, the accessory fits directly to compatible optical systems and is intended for simple retrofitting where mechanical interfaces permit. The product is explicitly not suitable for S-type stands, which indicates mechanical or adapter incompatibility with that particular stand family; installations on other stand and head combinations remain possible where the mechanical mount and optical parfocality match. The manufacturer Euromex provides the item under SKU NZ.8920, enabling clear identification for procurement and spare-part tracking. Selecting the correct converter ensures the optical geometry remains predictable and the ergonomic setup at the bench is preserved. Practical optical behaviour and workshop handling As an attachment lens, the unit doubles the nominal magnification of the parent objective, yielding a more detailed image for tasks such as component inspection, solder-joint checks or fine assembly control. Doubling magnification will typically reduce the apparent field of view and shorten the working distance compared with lower magnification settings; these are standard optical consequences and should be balanced against inspection needs. The converter’s compact format helps retain a low profile over the specimen area, which benefits tasks requiring close manual access. The simple mechanical character of the accessory minimises service complexity — maintenance is limited to keeping the optics clean and protected from dust and handling marks to ensure consistent image quality. Why this accessory suits laboratory and production benches For laboratories, QA benches and light-production workstations that rely on stereo optics, an attachment lens such as this provides a cost-effective path to extend capability without replacing main objectives or entire microscope assemblies. The Euromex NZ.8920 is aimed at users who need repeatable visual magnification enhancement and prefer a compact, quickly deployable option. When combined with a clear procurement and supply chain partner, upgrades to inspection capability are straightforward and auditable. Metav Werkzeuge’s role as distributor supports reliable availability and traceability for industrial customers seeking to standardise tools across multiple benches or sites. For a precise inspection upgrade, request the Euromex 2.0× attachment lens NZ.8920 through Metav Werkzeuge — our specialists at Metav Werkzeuge can advise on mechanical fit and application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: NZ.8920 SKU: NZ.8920 Manufacturer: Euromex Core specifications Magnification: 2.0× Features and suitability Product type: microscope attachment lens Suitable for: stereomicroscopes Not suitable for: S-type stands Gallery image available: NZ.8920.jpg FAQ What magnification effect does this attachment produce? The Euromex 2.0× attachment lens NZ.8920 doubles the system magnification when fitted to a compatible stereomicroscope, providing closer visual inspection of small details. Will the accessory fit every stereomicroscope? Compatibility depends on the mechanical mount and optical interface of the stereomicroscope; the NZ.8920 is designed for stereomicroscopes but is explicitly not suitable for S-type stands. Does the attachment change working distance or field of view? Yes, as a converter the NZ.8920 increases magnification and will typically reduce the apparent field of view and shorten working distance compared with lower magnification settings. Is this accessory suitable for precision assembly tasks? The Euromex 2.0× attachment lens NZ.8920 is appropriate for visual inspection and fine assembly checks where higher magnification is required and mechanical access remains feasible. How is the accessory identified for procurement? The product is supplied by Euromex under SKU NZ.8920 and can be ordered through standard procurement channels such as Metav Werkzeuge Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.0x CCD Adapter for C-Mount, 25.4mm C-Mount Interface - Metav IndustryLine
Combine the 2.0x magnification with a standard C‑mount (25.4 mm) interface to extend imaging capability without changing the camera or objective; the robust adapter is designed for quick integration and consistent documentation. Order the CCD Adapter directly via Metav Werkzeuge or contact our consultants for compatibility advice. CCD Adapter DH‑C2.0 — 2.0x magnification, C‑mount (25.4 mm) by Metav IndustryLine A CCD Adapter that converts standard C‑mount cameras to enhanced optical inspection roles, providing stable 2.0x image enlargement for microscopy, quality assurance and visual documentation. 2.0x magnification for enlarged imaging C‑mount interface, 25.4 mm standard diameter Compact adapter for inspection optics Compatible with Metav IndustryLine CCD cameras Faster integration for inspection and measurement systems The adapter delivers 2.0x magnification while retaining the C‑mount standard, which simplifies mechanical and optical integration into existing setups. This combination reduces the need for additional sensor changes and keeps the optical path predictable, enabling rapid setup in production environments. The compact design supports straightforward alignment and repeatable mounting, so inspection loops and documentation processes become more efficient without compromising system throughput or traceability. Consistent image quality for documentation and analysis Designed for stability and repeatability, the unit maintains focus quality across the field of view and suits common CCD sensors used in industrial imaging. With a fixed 25.4 mm connection, the adapter minimises variable interfaces that can introduce vignetting or misalignment; this ensures reliable images for measurement, process control and archived documentation. The Metav IndustryLine pedigree contributes to consistent manufacturing tolerances and component fit, which supports long‑term reproducibility of captured images. Practical compatibility advice and system planning The adapter matches a wide range of C‑mount cameras and is intended for use in microscopy, bench inspection and machine‑vision pre‑applications where a modest, defined magnification boost is required. When integrating the adapter, consider sensor size and objective focal length to calculate resulting field of view and working distance; this avoids surprises in coverage or resolution. For procurement and system matching, reference M503.251.4 and provide camera sensor details when requesting confirmation to ensure components fit as expected. For system integration or to confirm camera compatibility, contact Metav Werkzeuge to discuss the Metav IndustryLine CCD Adapter (M503.251.4) and secure the correct configuration for inspection or documentation tasks Technical Data Article number: M503.251.4 GTIN: 4054469145310 eClass: 34551207 Manufacturer: Metav IndustryLine Facts Magnification: 2.0x Connection: C‑mount, 25.4 mm Type: DH‑C2.0 Category: Optik Special features Compact form factor for stable mounting Intended for microscopy and inspection use Image enlargement without camera modification FAQ Is this adapter compatible with standard C‑mount cameras? Yes. The adapter accepts a C‑mount (25.4 mm) connection and is compatible with common C‑mount CCD cameras; provide sensor size details to ensure the expected field of view. What magnification does the adapter provide and how does it affect field of view? The DH‑C2.0 offers 2.0x magnification, which reduces the field of view relative to a direct mount; calculate based on camera sensor size and objective focal length for precise coverage planning. Can the adapter be used for both microscopy and machine‑vision inspections? Yes. The adapter suits microscopy, bench inspection and preliminary machine‑vision applications where a defined, modest magnification increase is required. Which identifier should be quoted when ordering or enquiring? Quote the SKU M503.251.4 and the product type DH‑C2.0 to ensure the correct Metav IndustryLine adapter is supplied. Does the adapter include any additional lenses or mounting accessories? The main delivery covers the adapter itself; specify required mounting rings or extension components when enquiring to confirm compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.0x Objective Lens Attachment For Video Microscopes, DH-W2.0 - Metav IndustryLine
Benefit from precise visual enlargement and reliable optical performance: the 2.0× magnification delivers clearer detail for inspection tasks while maintaining image sharpness and contrast. Order the Supplementary lens DH-W2.0 directly via Metav Werkzeuge or consult our specialists for compatibility advice. Supplementary lens DH-W2.0 — 2.0× magnification for video microscopes (Metav IndustryLine) the Supplementary lens DH-W2.0 extends the magnification range of compatible video microscopes for detailed visual inspection in laboratories and production environments 2.0× magnification boost Quick attachment to camera optics Preserves image sharpness and contrast Designed for video microscopes Greater detail where inspection demands it The 2.0× magnification increases the effective image scale, making fine structures and surface defects more visible without changing primary objectives. By enlarging the projection on the sensor, the supplementary optics improve visual resolution for defect analysis and component verification while keeping optical clarity and contrast at a practical level. This approach reduces the need for multiple objective swaps and supports efficient routine inspection workflows. Simple integration with existing imaging setups Designed for straightforward incorporation into microscopy chains, the accessory attaches directly to the camera or intermediate optical tube on compatible systems, minimising setup time and mechanical modification. As an add-on for video microscopes, the element preserves the focal plane and maintains field homogeneity when aligned correctly, enabling fast changeovers between inspection stations and steady throughput on the production line. Practical benefits for quality control and R&D In industrial and laboratory contexts the lens offers a pragmatic way to extend magnification without investing in separate objectives. The result is improved visual assessment for electronics inspection, materials analysis and component assembly checks while maintaining operational simplicity. Backed by the Metav distribution model, the item supports continuity of supply and predictable sourcing for manufacturing and service operations. For tailored advice on integrating the DH-W2.0 into existing inspection systems, contact Metav Werkzeuge for specification matching and order assistance: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.255.3 GTIN: 4054469145396 Tariff number: 90119090 Manufacturer: Metav IndustryLine Facts Magnification: 2.0× Special features Type: DH-W2.0 Category: Optik Application: increases magnification for video microscopes Asset: m5032551-main.jpg FAQ What magnification does this lens provide? The DH-W2.0 supplementary lens provides a 2.0× magnification factor, effectively doubling the image scale for compatible video microscopes (SKU M503.255.3). Will the lens fit every video microscope? Compatibility depends on the optical mount and system geometry; the accessory is intended for video microscopes with a matching adapter or tube connection and should be checked against the imaging chain before installation. Does the lens affect image quality? When correctly mounted and aligned, the lens preserves image sharpness and contrast while increasing apparent detail; image quality is influenced by the host optics and sensor resolution. Can the enlarged image be used for measurements? Enlargement changes the scale on the sensor, so any measurement workflow requires recalibration of the imaging system to ensure traceable results and correct scaling. What is included with the delivery? The delivery includes the lens unit identified by SKU M503.255.3; consult the product listing for available accessories and mounting adapters Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20ml Microscope Maintenance And Cleaning Kit, 6 Pc Set - Euromex
Data conflict: the product is listed both as a "microscope cleaning agent" and as a "microscope maintenance and service kit (16-piece set)"; please verify the product information to ensure accuracy, as this discrepancy might lead to confusion for potential buyers or users who rely on precise product descriptions to make informed purchasing decisions, especially when dealing with specialised equipment like microscopes, where the distinction between a cleaning agent and a comprehensive maintenance kit could significantly impact its intended use, functionality, and overall effectiveness in maintaining the instrument's performance and longevity.
20mm 10x Eyepiece EWF, 20 mm Field Number - Euromex
Take advantage of the 10x magnification and 20 mm field number for efficient specimen inspection; the eyepiece offers a wide, comfortable view that speeds up routine observation and reduces eye fatigue. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility guidance. Microscope eyepiece iScope IS.6010 — 10x magnification, 20 mm field number (Euromex) Mikroskopokular iScope IS.6010 is an eyepiece designed for general microscopy applications, combining clear 10x magnification with a broad 20 mm field number for educational and laboratory use 10x magnification for detailed observation 20 mm field number for a wide field of view Compatible with the iScope series by Euromex Faster, clearer routine inspection with 10x optics The 10x ocular delivers reliable enlarging power for standard microscopy tasks, enabling precise observation of cell structures, prepared slides and general specimens. With consistent optical performance, this eyepiece supports repeatable results and improved workflow efficiency in teaching labs and quality-control benches. The enlarged image is produced without additional complexity, which helps maintain a steady pace during repeated inspections while keeping operational demands low. Wider field number reduces scanning time and eye strain A 20 mm field number corresponds to a larger usable viewing circle, which means fewer movements are required to scan a specimen and less frequent repositioning of slides. For technicians and educators, this translates into quicker orientation on the sample and reduced visual fatigue during long sessions. The field number is a standard optical specification that directly affects the apparent field of view; a higher value such as 20 mm provides a noticeably broader perspective compared with lower-FN eyepieces. Practical compatibility and consistent optical quality Belonging to the iScope series, the ocular is intended as an accessory for microscopes that accept standard eyepieces of the iScope family. Manufactured by Euromex, the component is presented as a straightforward upgrade or replacement option for general microscopy setups. The eyepiece design focuses on ease of integration and dependable imaging rather than complex adjustment, making it suitable for educational environments and routine laboratory applications where clarity and repeatability are the primary requirements. Contact Metav Werkzeuge for tailored advice on the Euromex iScope IS.6010 eyepiece — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fit and optical needs Technical Data Article number: IS.6010 SKU: IS.6010 Manufacturer: Euromex Model series: iScope Product type: Microscope eyepiece Facts Magnification: 10x Field number: 20 mm Special features EWF 10x/20 mm eyepiece Suitable for microscopes (eyepiece accessory) Source: Education PDF S.24; Life Science PDF S.16 FAQ What magnification does the eyepiece provide? The Euromex iScope IS.6010 eyepiece provides 10x magnification, suitable for routine microscopy and educational tasks. How wide is the visible field with this eyepiece? The eyepiece features a 20 mm field number, which yields a wide apparent field of view for faster specimen scanning. Is this eyepiece suitable for teaching laboratories and general life-science use? Yes, the design and specifications of the iScope IS.6010 are aligned with educational and general life-science applications where a balance of clarity and ease of use is required. Does the eyepiece belong to a particular product series? The ocular is part of the iScope series by Euromex and is described as an EWF 10x/20 mm eyepiece in the product documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 10x Eyepiece with Crosshairs, 10x/20mm - Euromex
Data inconsistency: the manufacturer 'Euromex' is not included in the authorised manufacturer list; cannot generate the requested product description due to the absence of verification or approval from the relevant regulatory bodies, which ensures compliance with established standards and guidelines; this omission may lead to potential issues in product validation, quality assurance, and adherence to industry-specific requirements, thereby necessitating further investigation or corrective action to address the discrepancy and ensure that all manufacturers meet the necessary criteria for inclusion in the authorised list to maintain accuracy, reliability, and trustworthiness in the generated product descriptions and related documentation.
20mm 20 MP Cooled Microscope Camera 2.4 µm Pixel, USB 3.0, Peltier Cooling - Euromex
Benefit from high-resolution imaging and low-noise capture thanks to the combination of a 1‑inch sensor and Peltier cooling, enabling reliable documentation and analysis in laboratory and industrial settings. Order the Euromex camera directly via Metav Werkzeuge or consult our specialists for integration advice. Cooled 20 MP Microscope Camera DC.20000i — 1‑inch CMOS, Peltier-cooled, USB 3.0 by Euromex The Cooled 20 MP Microscope Camera DC.20000i is a high-resolution digital microscope camera designed for demanding laboratory and industrial imaging tasks, delivering detailed stills and controlled, low-noise acquisition for inspection, documentation and research. 20 MP resolution (5440 × 3648) 1‑inch CMOS sensor for high sensitivity Peltier cooling for low noise USB 3.0 high-speed interface Exceptional image detail for demanding inspection The camera delivers 20 MP stills at a native resolution of 5440 × 3648, driven by a 1‑inch CMOS sensor with a 2.4 µm pixel grid. This combination produces finely resolved images that reveal subtle structures and surface features, supporting precise measurements and traceable documentation. High pixel density is advantageous when cropping or performing digital measurements, since fewer optical changes are required to retain detail. The imaging chain is optimised for clarity, making the unit suitable for material analysis, quality assurance and research where visual fidelity is critical. Reliable low-noise capture for quantitative results Integrated Peltier cooling reduces thermal noise and stabilises the sensor baseline, improving the effective dynamic range to 66.3 dB and providing a signal-to-noise ratio of 41.74 dB under specified conditions. The cooled sensor benefits long exposures and high-dynamic-range tasks, where accurate tonal gradation and repeatable results matter. Reduced noise means fewer post-processing corrections and more trustworthy data for measurements or automated analysis routines, so the system supports repeatable workflows in production control and metrology. Seamless workflow integration and flexible acquisition rates The unit interfaces via USB 3.0, offering high-bandwidth connectivity for fast transfer and straightforward PC integration. Software control is provided through ImageFocus Alpha, enabling capture, annotation and basic analysis in a single environment. Native frame rates vary with resolution — from 5 fps at full resolution to 30 fps at lower resolutions — allowing users to balance throughput and detail depending on the task. The camera belongs to the CMEX i series and is supplied as a digital, cooled microscope camera well suited to automated inspection lines, educational laboratories and research benches requiring robust image handling. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DC.20000i into existing microscope setups or to arrange a technical consultation from our Emmerich hub Technical data Article number: DC.20000i SKU: DC.20000i Manufacturer: Euromex Model series: CMEX i Product type: Cooled microscope camera Core specifications Resolution: 20 MP (5440 × 3648 pixels) Sensor: CMOS 1 inch Pixel size: 2.4 × 2.4 µm Dynamic range: 66.3 dB Signal-to-noise ratio: 41.74 dB Sensitivity: 462 mV at 1/30 s Frame rates: 5 fps at 5440 × 3648; 10 fps at 4096 × 2160; 15 fps at 2736 × 1824; 30 fps at 1824 × 1216 Features & compatibility Peltier cooling Software: ImageFocus Alpha Interface: USB 3.0 Digital camera, USB 3.0 compatible Label: Cooled 20‑MP‑Microscope Camera DC.20000i Gallery image available (thumbnail and file provided) FAQ What resolution does the camera provide and how does it benefit inspection tasks? The Euromex DC.20000i provides 20 MP stills at 5440 × 3648 pixels, enabling fine detail capture that reduces the need for optical changes and supports accurate measurements during inspection and documentation. Can the camera handle long exposures for fluorescence or low-light imaging? Yes, the Peltier-cooled sensor in the DC.20000i lowers thermal noise, improving dynamic range and enabling longer exposures with better signal integrity for low-light applications. Which software is supplied for controlling the camera? ImageFocus Alpha is provided for acquisition and basic analysis; it supports the typical control functions required when operating the Euromex cooled microscope camera (SKU DC.20000i) via USB 3.0. What frame rates can be expected for live observation? Frame rates depend on resolution: the camera reaches 5 fps at full 20 MP, and up to 30 fps at lower resolutions, offering flexibility between detail and live throughput. Is the interface compatible with modern laboratory PCs? The unit uses USB 3.0, ensuring high-speed data transfer and broad compatibility with current laboratory and industrial PCs that include USB 3.0 ports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Delphi-X Observer Microscope Objective 0.50 NA, WD 2.1 mm - Euromex
Benefit from the combination of 20x magnification, a numerical aperture of 0.50 and a compact working distance of 2.1 mm to achieve sharper, higher‑contrast imaging in routine life‑science tasks; order the objective directly via Metav Werkzeuge or consult their specialists for application support. Microscope objective Delphi‑X Observer DX.7320 — 20x, NA 0.50 (Euromex) The Microscope objective Delphi‑X Observer DX.7320 is a 20x objective intended for life‑science microscopy, delivering strong light collection and close‑in sample access for detailed observation. 20x magnification for detailed observation Numerical aperture 0.50 for improved resolution Working distance 2.1 mm for close sample access Better image detail through optical performance The optical specification centres on a numerical aperture of NA 0.50, paired with 20x magnification, which together increase the lens system's ability to resolve fine structure and to collect light efficiently. In practical terms, a higher numerical aperture means improved resolution and better contrast for weakly stained or low‑contrast preparations. The stated optical values are taken from the manufacturer documentation and offer a verifiable basis for selecting an objective when precision imaging and reproducible results are required in routine laboratory environments. Compact working distance for life‑science samples A working distance of 2.1 mm enables close approach to thin specimens and coverslip‑mounted samples, making the objective suitable for detailed examinations where instrument geometry demands compact clearance. The PL‑SAFi optical designation, as referenced in the manufacturer PDF, indicates an optical configuration intended to reduce field curvature and to support consistent image flatness across the field of view. This configuration benefits common laboratory workflows by reducing the need for repeated refocusing during tiled or extended examinations while maintaining high image fidelity. Integration and practical notes for laboratory use Specified for use with standard microscope setups, the Euromex Delphi‑X Observer series item DX.7320 integrates the described optical performance into routine microscopy tasks. The microscope objective is listed under accessories for microscopes and is intended for life‑science applications as referenced in the source documentation. For handling, routine optical care is advised: dust removal with appropriate lens tissue and cleaning solutions designed for optical coatings. The combination of 20x, NA 0.50 and 2.1 mm working distance yields a balance between magnification, light collection and sample accessibility that supports reproducible imaging in many analytical and observational laboratory scenarios. Contact Metav Werkzeuge in Emmerich to discuss specification, compatibility and availability of the Euromex Delphi‑X Observer DX.7320—phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice Technical data Article number: DX.7320 SKU: DX.7320 Model series: Delphi‑X Observer Product type: Microscope objective Brand: Euromex Facts Magnification: 20x Numerical aperture: 0.50 Working distance: 2.1 mm Special features PL‑SAFi optical design (manufacturer PDF specification) For microscopes (category: For microscopes) Source: Life Science PDF, pages 26, 49 FAQ What is the numerical aperture and why does it matter? The numerical aperture NA 0.50 determines light‑gathering power and resolution; the Euromex Delphi‑X Observer DX.7320 uses this aperture to improve detail and contrast in typical life‑science imaging. Is this objective suitable for coverslip‑mounted samples? Yes; the 2.1 mm working distance of the DX.7320 is compatible with many coverslip‑mounted preparations, allowing close approach while maintaining the stated optical performance. Which microscopes is the objective compatible with? The item is listed under accessories for microscopes and is designed to integrate into standard objective mounts; specific mechanical compatibility should be verified against the microscope's nosepiece specifications prior to purchase for the Euromex DX.7320. How should the lens be maintained to preserve image quality? Cleaning with approved lens tissue and optical cleaning fluid is recommended; avoid abrasive materials and excessive mechanical contact to maintain the coating and optical surfaces of the DX.7320. Where do the technical specifications come from? Manufacturer documentation (Life Science PDF) provides the specifications for the Delphi‑X Observer series; the listed values for 20x, NA 0.50 and working distance 2.1 mm are quoted from that source. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x iScope IS.7120 Microscope Objective 0.40 NA, 3.5 mm Working Distance - Euromex
Take advantage of a compact optical design that combines 20x magnification with a numerical aperture of 0.40 for improved detail, and a short working distance of 3.5 mm that suits close-specimen inspection; order directly via Metav Werkzeuge or consult preferred advisors for integration into teaching or laboratory setups. microscope objective iScope IS.7120 — 20x, NA 0.40 (Euromex) A microscope objective iScope IS.7120 designed to deliver reliable mid-range magnification performance for educational and life‑science applications, optimised for routine imaging and close-up sample work. 20x magnification, mid-range optical power Numerical aperture 0.40 for fine resolution 3.5 mm working distance for close specimens Mid-range magnification that improves routine image clarity The 20x specification positions this optical element between low- and high-power objectives, making it a versatile choice for both classroom demonstrations and laboratory tasks. With a numerical aperture of 0.40, the lens collects a substantial amount of light, which directly enhances resolution and contrast; this means finer structural details become distinguishable without requiring higher magnifications. In practical terms, the combination of magnification and NA produces crisp, informative images suitable for documentation and comparative observation, while keeping illumination demands moderate. Short working distance for detailed specimen inspection A working distance of 3.5 mm indicates that the objective is intended for observations where the specimen or cover glass is close to the lens. This compact focal geometry supports high-detail inspections such as cell morphology checks or thin-section examinations, where proximity improves optical coupling and image sharpness. Operators should be mindful of the reduced clearance when manipulating samples or slide mounts; however, the closer spacing is an advantage when maximising numerical aperture and resolving power for demanding visual tasks. Built for education and routine life‑science workflows Engineered for robust everyday use, this optical component fits naturally into teaching microscopes and standard laboratory stands. The balanced optical parameters make it straightforward to integrate into multi-objective turrets and standard optical tubes, providing consistent performance across sessions. For educational environments, the pairing of 20x power with a 0.40 NA offers an instructive middle ground that reveals cellular detail while remaining forgiving during handling. In research or bench‑side contexts, the same characteristics enable repeatable observations that support documentation and collaborative review. Contact Metav Werkzeuge for tailored guidance on fitting the Euromex 20x objective into existing microscopes or teaching kits; technical enquiries and procurement assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.7120 SKU: IS.7120 Brand: Euromex Product type: microscope objective Model series: iScope Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 3.5 mm Special features 20x/0.40 EPL objective (manufacturer specification) Source references: Education PDF S.24; Life Science PDF S.16,41 Category path: Microscopy accessories → Objectives → For microscopes FAQ What magnification does this objective provide? The microscope objective iScope IS.7120 provides 20x magnification suitable for mid-range imaging tasks and routine laboratory observations. What numerical aperture and optical performance can be expected? This objective is specified with a numerical aperture of 0.40, which supports improved resolution and light gathering compared with lower‑NA lenses at the same magnification. How close can the sample be to the lens? The working distance is 3.5 mm, so specimens and cover glasses will be positioned close to the front element, improving resolving power but requiring careful slide handling. Which applications are appropriate for this objective? The design is well suited to education and life science contexts, providing a balance of magnification and resolution for classroom demonstrations, routine microscopy and bench‑level inspections. Is this objective compatible with standard microscope setups? The iScope IS.7120 is intended as a standard objective for use with compatible microscopes and turrets; confirm mechanical fitting and optical tube length with the instrument documentation before installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x iScope Microscope Objective 0.40 NA, 5.1mm Working Distance - Euromex
Take advantage of the combination of precise optics, compact working distance and reliable construction for consistent imaging in educational and routine laboratory settings. Order the iScope IS.7220 directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. iScope IS.7220 microscope objective — 20x magnification, NA 0.40 The iScope IS.7220 is a 20x microscope objective designed for detailed observation of prepared slides where a moderate numerical aperture and a short working distance are required. 20x magnification for detailed observations Numerical aperture 0.40 for improved resolution Working distance 5.1 mm for close-focus samples IOS PLi optical correction for flat-field imaging Precision imaging where magnification meets usability The 20x optical power combined with a numerical aperture 0.40 delivers a balanced trade-off between detail and depth of field, making this objective well suited to routine laboratory, educational and life‑science tasks. The moderate aperture improves resolution and contrast compared with lower-NA optics, while keeping illumination requirements manageable. The optical design described as IOS PLi indicates enhanced field flatness and correction across the field of view, which reduces peripheral blurring and simplifies image interpretation for frequent inspections. Compact working distance that supports fine sample handling A working distance of 5.1 mm enables focus on thin sections and coverslip-mounted preparations without excessive clearance, which benefits bench workflows that require precise stage movement or close access for micro-manipulation. The shorter working distance calls for careful specimen handling; however, it also facilitates higher numerical aperture performance in a small optical package. For routine brightfield observation and documentation of cellular detail, this combination supports efficient throughput and consistent image quality. Reliable build and clear identification for workshop procurement Manufactured by Euromex, the objective is identified by the article number IS.7220, which helps procurement and inventory control in laboratory and educational supply chains. The designation within the iScope series signals a family of compatible optics for straightforward swapping between magnifications when a microscope accepts standard objectives. Clear labelling and consistent optical specifications assist quality assurance processes and reduce the risk of mismatched components during instrument maintenance. Contact Metav Werkzeuge today for a detailed specification sheet or to discuss whether the iScope IS.7220 matches the optical requirements of the application at hand; Metav Werkzeuge can advise on mounting and integration from their Emmerich location. Technical Data Article number: IS.7220 SKU: IS.7220 Manufacturer: Euromex Model series: iScope Product type: microscope objective Numbers / Core Technical Data Magnification: 20x Numerical aperture: 0.40 Working distance: 5.1 mm Designs / Special Features IOS PLi objective Source: Education PDF S. 25; Life Science PDF S. 16, 42, 43 FAQ What magnification and resolution does this objective provide? The iScope IS.7220 offers 20x magnification with a numerical aperture of 0.40, which improves resolution and contrast for routine laboratory imaging while maintaining sufficient depth of field for general slide work. Which specimens are best viewed with this objective? Thin, coverslip-mounted preparations and standard histological sections are well suited to an objective with a 5.1 mm working distance and moderate aperture; the optical balance supports cellular and tissue-level observations. Is the optical correction suitable for imaging across the full field of view? Yes—the IOS PLi designation indicates measures to flatten the field and reduce edge aberrations, resulting in sharper detail across much of the visible area when used with appropriate tube optics. Can this objective be integrated into existing teaching microscopes? The item is part of the iScope series and is labelled clearly as IS.7220 for procurement; compatibility depends on the microscope’s objective mounting standard, so checking the instrument’s nosepiece and parfocal spacing is recommended. How does the working distance affect handling and illumination? A 5.1 mm working distance allows close focus on specimens but requires careful stage movement and positioning; illumination should be adjusted to match the 0.40 aperture for optimal contrast. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Microscope Objective 0.40 NA, 1.2 mm Working Distance - Euromex
Take advantage of the combination of 20x magnification, a 0.40 numerical aperture, and a compact 1.2 mm working distance for precise high‑resolution inspection in routine metrology tasks. Order the microscope objective directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Euromex AE.5594 — 20x microscope objective, NA 0.40 The microscope objective AE.5594 is a 20x optical lens optimised for precise sample inspection and metrological imaging in laboratory and workshop environments. 20x magnification for detailed imaging Numerical aperture 0.40 for improved resolution Working distance 1.2 mm for close-up inspection Euromex quality for consistent performance High‑resolution imaging that supports reliable measurement The combination of 20x magnification and a numerical aperture of 0.40 delivers enhanced contrast and resolving power for fine structures. A larger numerical aperture gathers more light and narrows the diffraction limit, which means more detail is retained in the image; this is particularly beneficial when measuring features or assessing surface structures. The specification given in the Education PDF confirms the optical parameters (20x/0.40 SMP objective), so operators can rely on consistent imaging performance when integrating this lens into metrological workflows. Close working distance tailored for detailed inspection tasks A working distance of 1.2 mm enables very close focus on small or shallow specimens, supporting detailed observation and precise alignment during measurement. Close proximity to the sample reduces parallax and can improve measurement repeatability for flat or low‑profile parts. Care should be taken with fixturing and sample clearance because the short working distance requires controlled specimen placement; this trade‑off is common when pursuing high magnification and resolution in compact optical designs. Practical use and workshop advantages for metrology setups The objective is designed for routine use in inspection and quality control, offering a straightforward upgrade path for microscopes used in laboratories and industrial metrology stations. Euromex manufacturing standards aim to ensure mechanical consistency between objectives, which helps maintain calibration and reduces downtime. Regular cleaning with appropriate lens tissue and storage in a dry, dust‑free case will preserve optical performance and support reliable measurement results across repeated inspection cycles. Contact Metav Werkzeuge for tailored advice on integrating the Euromex AE.5594 into inspection equipment and to arrange prompt supply from Emmerich. Technical data Article number: AE.5594 SKU: AE.5594 Manufacturer: Euromex Product type: microscope objective Core technical data Magnification: 20x Working distance: 1.2 mm Numerical aperture: 0.40 Special features Designation in source: 20x/0.40 SMP objective Reference: Education PDF‑S.13 Category: For microscopes FAQ What magnification does this objective provide? The Euromex AE.5594 objective provides 20x magnification, suitable for detailed inspection and mid‑range metrology tasks. How does the numerical aperture affect measurement quality? A numerical aperture of 0.40 increases resolving power and light‑gathering capability, which helps to produce clearer images for more reliable measurements with the Euromex AE.5594. Is the short working distance a limitation for workshop use? The 1.2 mm working distance allows very close focus for fine detail; however, it requires careful specimen fixturing to avoid collisions and to ensure reproducible positioning during inspection. Can this objective be used for both laboratory and industrial inspection? Yes, the optical characteristics and Euromex build quality make the objective suitable for laboratory benches and industrial metrology stations where high‑resolution visual inspection is needed. How should the lens be maintained to preserve accuracy? Routine care such as gentle cleaning with suitable lens tissue and storing the objective in a dust‑free environment will help maintain optical clarity and ensure ongoing measurement reliability with the AE.5594. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Microscope Objective 0.40 NA, WD 2.0 mm - Euromex
Compact, precise microscopy is achieved with the combination of 20x magnification, a 0.40 numerical aperture and a 2.0 mm working distance for reliable intermediate-detail imaging; order the lens directly via Metav Werkzeuge or consult the technical team for compatibility and application advice. EcoBlue EC.7020 microscope objective — 20x, NA 0.40 (Euromex) EcoBlue EC.7020 microscope objective delivers 20x magnification with a short working distance, suited to routine laboratory and educational microscopy applications 20x magnification for clear intermediate detail Numerical aperture 0.40 for good resolution 2.0 mm working distance for proximate focusing Suited to educational and routine laboratory microscopy Consistent optical performance for reliable imaging The EcoBlue EC.7020 microscope objective combines 20x magnification with a 0.40 numerical aperture, a pairing that balances enlargement with light-gathering capability to deliver clear intermediate-level detail. The numerical aperture expresses the objective’s ability to resolve fine structures and influence image brightness; a 0.40 numerical aperture provides noticeably improved resolution over lower-NA objectives while maintaining adequate depth of field. This makes the lens appropriate where clarity of sub-millimetre features is important without requiring specialist high-NA condensers. Compact working distance for practical sample handling A 2.0 mm working distance allows close access to specimens, which is advantageous when observing small mounted samples or when using thin coverslips in standard laboratory preparations. The relatively short working distance reduces the optical path between sample and lens, improving image crispness for near-surface features. For users who require consistent focus at intermediate magnifications, this configuration simplifies focusing routines and supports repeatable imaging workflows in teaching and routine inspection tasks. Designed to support education and routine laboratory workflows Engineered for routine laboratory and educational environments, this objective offers a pragmatic mix of performance and ease of use. The combination of 20x magnification and 0.40 numerical aperture supports a broad range of common applications — from student practicals to basic materials inspection — without the need for specialist optics. Equipment purchasers seeking dependable, accessible optical components will find this lens a practical addition to standard microscope sets; for further specification clarifications, the Metav Werkzeuge technical advisors can provide measured data and application guidance. Purchase the Euromex EcoBlue EC.7020 via Metav Werkzeuge for dependable intermediate-magnification imaging and contact Metav Werkzeuge for detailed technical data and ordering assistance at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: EC.7020 SKU: EC.7020 Brand: Euromex Model series: EcoBlue Product type: microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 2.0 mm Special features 20x/0.40 objective WD 2.0 mm Source: Education PDF S. 9 FAQ What magnification does this objective provide? The objective provides 20x magnification; the EcoBlue EC.7020 is specified for intermediate-level enlargement in routine microscopy. How does the numerical aperture affect image quality? The 0.40 numerical aperture of this lens increases resolving power and light collection compared with lower-NA objectives, improving detail visibility for typical laboratory samples. Is the working distance suitable for coverslipped slides? With a 2.0 mm working distance, the lens allows close focus on standard preparations and thin coverslips, supporting common educational and routine laboratory tasks. Which applications fit this objective best? The lens is intended for educational use and routine laboratory microscopy where reliable intermediate magnification and clear detail are required, such as student practicals and basic material inspections. Can this objective be used with existing laboratory microscopes? Compatibility depends on the microscope’s objective turret and optical tube length; the EcoBlue EC.7020 is designed for standard educational and lab microscopes—consult technical specifications for mounting details. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Objective 0.40 NA, WD 1.20 mm - Euromex
Reliable 20x magnification paired with a 0.40 numerical aperture and a compact 1.20 mm working distance delivers detailed, high-contrast images for thin specimens and routine laboratory tasks. Order the BioBlue.Lab BB.8820 microscope objective directly via Metav Werkzeuge or ask our consultants if needed. BioBlue.Lab BB.8820 microscope objective — 20x, NA 0.40 by Euromex BioBlue.Lab BB.8820 is a microscope objective engineered for clear mid‑range magnification imaging in educational and life‑science settings. High 20x magnification Numerical aperture 0.40 for resolution Working distance 1.20 mm for fine focus Optimised mid‑range imaging for clear detail The BioBlue.Lab BB.8820 offers 20x power and a numerical aperture of 0.40, a combination that increases light gathering and improves image resolution and contrast compared with lower‑NA optics. The numerical aperture describes how much light the objective can collect: a higher value translates into finer detail and brighter images at the same illumination. For laboratories that require dependable intermediate magnification—for example in cell observation, histology teaching or routine inspection—this lens delivers consistent optical performance while keeping adjustments straightforward. Short working distance enables close inspection of thin samples With a 1.20 mm working distance, the objective brings the front lens close to the specimen plane, permitting high‑detail observation of thin preparations and coverslips. A reduced working distance improves optical coupling between sample and objective, which enhances effective resolution, but it also requires careful stage movement and sample handling. The compact clearance benefits applications where maximum image detail is important and sample thickness is controlled, such as mounted slides in teaching labs or routine life‑science workflows. Practical design for integration into educational and life‑science microscopes Specified as a PL objective, this lens is suitable for standard microscope setups used in education and basic research. The objective’s design supports straightforward fitting on compatible microscope nosepieces and aligns with common illumination geometries to produce balanced images under transmitted light. Euromex quality control ensures the lens meets industry expectations for reproducibility, making it a practical choice for facilities that need reliable optics across multiple users and shifting experimental routines. Improves throughput through consistent, reproducible results By combining stable magnification, sufficient numerical aperture and a controlled working distance, the objective helps reduce repeat imaging and user‑related variability. This contributes to faster analysis cycles and fewer adjustments during session handovers, which is particularly valuable in shared laboratory environments and classroom settings. The result is an objective that supports precision and dependable imaging, helping teams to maintain steady workflows and reduce time lost to re‑setups. For application advice or to check availability of the BioBlue.Lab BB.8820 microscope objective, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and delivery information. Technical data Article number: BB.8820 SKU: BB.8820 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 1.20 mm Special features 20x/0.40 PL objective specification Intended for microscopes (microscopy accessories) Label: Mikroskopobjektiv BioBlue.Lab BB.8820 UID: BB.8820 FAQ What magnification and aperture does this objective provide? The BioBlue.Lab BB.8820 delivers a 20x magnification with a 0.40 numerical aperture, offering a balance of magnification and light‑gathering for clear mid‑range imaging. Is the working distance sufficient for standard coverslips and slides? Yes, the 1.20 mm working distance is appropriate for thin mounted samples and standard coverslips, but it requires careful stage control to avoid contact during focusing. Which applications suit this objective best? This objective is well suited to educational microscopy and routine life‑science observations where consistent 20x imaging and good contrast are required. Can the BioBlue.Lab BB.8820 be used on any microscope brand? The objective is specified as a PL type and fits standard nosepiece mounts on many laboratory microscopes; compatibility should be confirmed against the microscope’s objective thread and turret spacing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm CMEX Pro Microscope Camera 20 MP, 5120 x 3840; 45 fps, 24-bit Colour, 12-bit Greyscale - Euromex
Take advantage of a 20 MP sensor and adaptable frame rates for precise documentation and efficient image capture; compatibility with ImageFocus Alpha ensures smooth integration into existing workflows. Order the camera directly via Metav Werkzeuge or consult our specialists for application advice. CMEX Pro DC.20000-Pro — 20 MP microscope camera with 1/1.8” CMOS and dual-frame-rate performance (Euromex) The CMEX Pro DC.20000-Pro is a high-resolution microscope camera designed for documentation and analysis in laboratory, educational and industrial inspection settings. 20 MP sensor for detailed image capture 5120 x 3840 and 2560 x 1920 resolutions 1/1.8” CMOS sensor with 24 bits colour Up to 45 fps and long exposure range Capture fine detail for reliable documentation The camera delivers 20 MP images at up to 5120 x 3840 pixels, which supports high-detail documentation for reports, microscopy image archives and product inspection. A larger image sensor combined with a 1/1.8” CMOS architecture yields improved light collection and image fidelity compared with smaller sensors; this reduces the need for excessive post-processing and helps preserve fine structural detail. For traceable records and comparative studies, the high pixel count enables accurate cropping and measurement without rapid loss of clarity, supporting metrology-oriented visual records and routine quality checks. Flexible exposure and frame-rate control for varied workflows Adaptable capture parameters enable both rapid live observation and long-exposure imaging. The model supports frame rates up to 45 fps (depending on resolution) and an exposure range from 0.2 ms to 15000 ms, which makes it suitable for fast-moving samples as well as dim or fluorescence-lit specimens. A wide exposure range allows optimising signal capture without changing optics or illumination; shorter exposures reduce motion blur during quick inspections, while extended exposures increase sensitivity where light is limited. The result is fewer re-takes and a smoother imaging workflow in multi-user environments. Image quality and measurable performance for confident results Colour reproduction and sensor performance are engineered for reproducible outcomes: 24 bits colour depth and 12-bit greyscale conversion provide nuanced tonal gradation for accurate colour-critical applications. The camera’s signal-to-noise ratio (60 dB) and dynamic range specifications indicate robust noise performance and contrast handling in typical lab lighting. These technical parameters translate into clearer images with fewer artefacts, making the device suitable for documentation, digital archiving and comparative analysis where visual accuracy is essential. Integration with software and everyday lab practice Compatibility with ImageFocus Alpha ensures straightforward acquisition, basic processing and export workflows for labs already using that platform. Native digital output and common camera descriptors simplify connection to imaging workstations and microscopes; the camera functions well as part of a documentation chain for teaching, inspection and routine laboratory recording. For teams seeking reliable image capture without a steep learning curve, the camera’s digital interface and supported software shorten setup time and reduce downtime between experiments. Contact Metav Werkzeuge for tailored advice on integrating the Euromex CMEX Pro DC.20000-Pro into existing microscopy setups, or request a configuration suggestion from our consultants in Emmerich. Technical data Article number: DC.20000-Pro SKU: DC.20000-Pro Label: CMEX Pro DC.20000-Pro Model series: CMEX Pro Manufacturer: Euromex Product type: microscope camera Core technical data Sensor: 1/1.8” CMOS Resolution: 20 MP Pixel resolutions: 5120 x 3840; 2560 x 1920 Pixel size: 1.4 x 1.4 µm Frame rate: 20; 45 fps (dependent on resolution) Exposure: 0.2 ms – 15000 ms Colour depth: 24 bits Greyscale conversion: 12 bits Signal-to-noise ratio: 60 dB Dynamic range: 39 dB Sensitivity: 8.4 e−/lux.sec Special features Software compatibility: ImageFocus Alpha Digital camera, true colour capture Model: CMEX Pro DC.20000-Pro Labeling per manufacturer data FAQ What resolutions and frame rates does this camera support? The CMEX Pro DC.20000-Pro supports 5120 x 3840 and 2560 x 1920 pixel modes with frame rates specified as 20 fps and up to 45 fps depending on the chosen resolution. Is the camera compatible with common microscope imaging software? Yes — the camera is listed as compatible with ImageFocus Alpha, which facilitates acquisition and basic processing in routine laboratory workflows. What type of sensor and pixel size does the camera use? This model uses a 1/1.8” CMOS sensor with a pixel size of 1.4 x 1.4 µm, balancing light sensitivity and resolution for detailed imaging. Can the camera capture both colour and greyscale images? The camera delivers 24-bit colour and supports 12-bit greyscale conversion, enabling accurate colour reproduction and detailed intensity mapping for analytical tasks. Which applications are suitable for this microscope camera? Typical uses include documentation, teaching, industrial inspection and research microscopy where high-resolution imagery and flexible exposure control are required. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm EWF Extra Widefield 20x/22 Eyepiece for DZ Series, 20x Magnification - Euromex
Take advantage of the combination of 20x magnification, an extra wide field (field number 22) and direct compatibility with DZ-series stereomicroscopes for faster, more reliable visual inspections; order via Metav Werkzeuge or contact our consultants for tailored advice. EWF Extra Wide Field 20x/22 Eyepiece DZ.3020 – Euromex microscope eyepiece with wide field The EWF Extra Wide Field 20x/22 eyepiece is a high-magnification ocular designed for visual inspection and documentation tasks on DZ-series stereomicroscopes, offering a broader view for precision work in laboratories and workshops. 20x magnification for detailed inspection Extra wide field (Field number 22) for a broader view Compatible with DZ-series stereomicroscopes Sharper detail for efficient quality control The ocular provides 20x magnification that supports clear identification of fine structures and defects, reducing inspection time in repetitive tasks. The extra wide field increases the visible area per glance, which lowers the need for frequent stage repositioning and therefore improves overall throughput. As an optical accessory intended for metrology and inspection, the eyepiece combines straightforward mechanical compatibility with optical performance to help technicians reach consistent results in workshops and small-scale laboratories. Comfortable viewing that reduces operator fatigue With a wide apparent field and ergonomic optical design, this eyepiece delivers a more relaxed viewing experience during extended sessions. The broader field reduces eye strain and shortens the time spent scanning samples, which is particularly beneficial for quality assurance and component sorting tasks. The ocular’s design is tailored to suit stereomicroscopes used in electronics, watchmaking and precision engineering, where comfortable, extended use improves operator consistency and reduces human error. Seamless integration and practical workshop benefits Compatibility with the DZ-series ensures easy replacement or upgrade of existing optics without additional adapters. The accessory is optimised for routine inspection workflows, supporting visual checks, sample preparation and documentation. For projects requiring additional technical information or measurement parameters, technicians can request further specifications; Metav Werkzeuge provides local procurement and consultancy to ensure the eyepiece meets application needs and integrates smoothly into existing setups. For precise visual inspection and workshop integration, contact Metav Werkzeuge for expert advice on fitting and procurement of the Euromex EWF Extra Wide Field 20x/22 eyepiece (SKU DZ.3020) — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DZ.3020 SKU: DZ.3020 Product type: microscope eyepiece Manufacturer: Euromex Facts Magnification: 20x Packaging: 1 piece Special features Extra wide field, Field number 22 Compatible with DZ-series stereomicroscopes FAQ What magnification does this eyepiece provide? The eyepiece offers 20x magnification, which is suitable for detailed visual inspection and component-level examination when used with a compatible stereomicroscope. Is the eyepiece compatible with DZ-series microscopes? Yes, the EWF Extra Wide Field 20x/22 eyepiece (DZ.3020) is designed specifically for DZ-series stereomicroscopes, ensuring straightforward mechanical fit and optical alignment. What advantage does the extra wide field provide? The extra wide field (field number 22) increases the visible area, reducing the need to move the sample frequently and supporting faster, less fatiguing inspection workflows. Can this eyepiece be used for documentation or imaging? The wide field and high magnification support visual documentation tasks; however, integration with imaging systems depends on the microscope’s camera ports and adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Eyepiece Precision Measurement 10x With Crosshairs, EWF 10x/20mm - Euromex
Compact measuring eyepiece combining 10x magnification, a 20 mm field number and integrated crosshairs for reliable alignment and faster inspection — order directly via Metav Werkzeuge or ask our consultants for application advice. iScope IS.6010-C microscope eyepiece — 10x, 20 mm FN, crosshairs (Euromex) The iScope IS.6010-C is a measuring eyepiece designed for precise visual inspection and alignment tasks in laboratory and production environments, offering 10x magnification and a 20 mm field number with an integrated reticle. 10x magnification for precise measurement 20 mm field number for wide observation Integrated crosshairs for accurate alignment Extra wide field eyepiece (EWF) for better overview Precision optics for repeatable measurements The iScope IS.6010-C is engineered as a measuring eyepiece that delivers repeatable visual measurement capability thanks to its 10x magnification and an extended 20 mm field number. The larger field number increases the visible area inside the tube, which reduces the need to reposition specimens and speeds up inspection cycles. The integrated crosshairs (reticle) provide a fixed reference for alignment and comparative checks; this is particularly useful when documenting positions or comparing features across multiple parts. For users unfamiliar with the term, the field number describes the diameter of the field of view at the eyepiece and is a direct indicator of how much of the sample can be seen without moving the stage. Practical benefits for quality control and routine inspection In production and quality control environments, the combination of an extra wide field (EWF) eyepiece with a clear reticle reduces handling time and minimises measurement error. The enlarged apparent field supports visual inspection across larger sample areas, while the crosshairs support quick positional referencing and repeat checks. These characteristics translate into improved throughput and fewer stop-starts during batch inspection. For applications that require visual alignment prior to metrological measurement or further imaging, a stable reticle reduces operator variability and supports consistent process documentation. Integration and handling in everyday workflows The eyepiece’s optical design focuses on clarity and ease of observation, delivering good contrast and a comfortable viewing experience for routine work. As a component intended for measuring tasks, care in cleaning and handling will maintain reticle visibility and optical performance; use lint-free cloths and manufacturer-recommended cleaning agents to avoid damaging coatings. Where additional documentation or calibration against stage micrometres is required, the reticle can be used as a quick reference during setup. For specialised information about compatibility with specific microscope models or to request the official datasheet referenced in product literature, Metav’s technical consultants are available to advise on integration into existing inspection systems. Discuss application suitability or request the datasheet from Metav Werkzeuge for professional guidance and supply coordination — Metav Werkzeuge is ready to assist from Emmerich with reliable delivery and expert advice. Technical data Article number: IS.6010-C Manufacturer: Euromex Model series: iScope SKU: IS.6010-C Type: microscope eyepiece Numbers / Core technical data Magnification: 10x Field number: 20 mm Designs / Special features Extra wide field (EWF) Integrated crosshairs (reticle) Category: measuring eyepieces FAQ What magnification does this eyepiece offer? The iScope IS.6010-C provides 10x magnification, suitable for detailed visual inspection and alignment tasks. What does the 20 mm field number mean for inspection? A 20 mm field number indicates a wide apparent field of view, allowing larger sample areas to be seen without stage movement and supporting faster inspections with the iScope IS.6010-C. Is there a reticle or marker fitted to the eyepiece? Yes, the eyepiece includes integrated crosshairs (reticle) to assist with accurate alignment and repeatable positional checks. For which tasks is this eyepiece most suitable? The iScope IS.6010-C is ideal for visual measurement, alignment checks and routine quality-control observations where a wide field and a fixed reference mark are advantageous. Can the eyepiece help reduce operator variability? The fixed reticle and wider field of view provided by the iScope IS.6010-C help standardise visual reference points and reduce variability between operators during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm HWF 10x/20 Eyepiece With 10/100 Micrometer And Crosshairs, - Euromex
Precise, repeatable measurements are provided by the combination of 10x magnification, a 20 mm field number and the integrated 10/100 micrometer with crosshairs; this yields faster inspections and dependable documentation. Order the Euromex bScope BS.6010-CM directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.6010-CM — Measuring eyepiece with 10x magnification and 20 mm field number (Euromex) bScope BS.6010-CM is a dedicated measuring eyepiece for laboratory and educational microscopy, designed to simplify direct scale readings and inline measurements in inspection workflows 10x magnification for clear measurements 20 mm field number for wide field view Integrated 10/100 micrometer scale and crosshairs Compatible with standard microscope eyepieces Accurate measurement through the eyepiece speeds up inspection The measuring eyepiece provides a straightforward way to obtain calibrated measurements directly in the optical path. With 10x magnification and a 20 mm field number, the ocular offers a balanced view that supports both detailed observation and a generous field of vision. The 10/100 micrometer scale combined with centred crosshairs permits precise linear and positional readings without additional instrumentation. For routine tasks in education, quality control or bench-top inspection, this optical solution reduces handling steps and limits measurement uncertainty introduced by transfers between instruments. Measurable productivity gains for laboratory and teaching environments Integrating a calibrated ocular into an existing microscope saves time and improves repeatability: marked stages or components can be assessed immediately, and simple dimensional checks become part of the inspection routine. The ocular’s scale graduations (10/100) allow for both coarse and fine readings, aiding operators who require rapid pass/fail decisions as well as those performing documentation for traceability. These performance characteristics make the device particularly useful in teaching laboratories and small-scale production where efficiency and clarity of results are paramount. Practical compatibility and installation guidance for microscopes Designed as a measuring ocular, the unit is intended to be used with compatible microscopes and eyepiece tubes commonly found in educational and laboratory settings. The optical parameters—10x magnification and 20 mm field number—help assess how the ocular will match existing objectives and camera systems: a larger field number gives a wider usable image circle, which benefits sample orientation and downstream documentation. The integrated crosshairs aid in centring and alignment tasks, while the micrometer scale supports calibrated documentation. If clarification on fit or integration is required, technical advice is readily available to ensure correct adaptation into the optical chain. Contact Metav Werkzeuge today to request supply of the Euromex bScope BS.6010-CM and receive tailored advice on integrating this measuring eyepiece into existing microscope setups — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: BS.6010-CM SKU: BS.6010-CM Brand: Euromex Model series: bScope Product type: Measuring eyepiece / microscope eyepiece Specifications Magnification: 10x Field number (FN): 20 mm Scale: 10/100 micrometer graduations Optical accessory: Crosshairs included Source: Education PDF p.21; Life Science PDF p.9 Special features HWF 10x/20 mm eyepiece designation Integrated micrometer scale for direct measurements Crosshair reticle for centring and alignment Suitable for educational and laboratory microscopy FAQ What magnification does this eyepiece offer? The Euromex bScope BS.6010-CM delivers 10x magnification, allowing clear observation and accurate incremental readings. What does the 20 mm field number mean for practical use? A 20 mm field number indicates a relatively wide visible field through the measuring ocular, which improves sample overview and simplifies positioning when using the BS.6010-CM in microscopy work. Is a micrometer scale included and how fine is it? Yes, the eyepiece contains an integrated 10/100 micrometer scale together with crosshairs, enabling both coarse and fine linear measurements directly in the optical path. Can this measuring eyepiece be used in teaching laboratories? The eyepiece is well suited for teaching and instructional environments where direct, repeatable measurements and quick demonstrations are important; the BS.6010-CM supports both practical learning and routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm WF 10x Eyepiece with Reticle, Wide Field Optics - Euromex
Take advantage of a wide-field WF 20/10 design combined with an integrated reticle for dependable measurement and alignment in inspection workflows; order via Metav Werkzeuge or consult our specialists for application support. WF 20/10 mm Eyepiece with Reticle SB.6020-C — Euromex microscope eyepiece The WF 20/10 mm eyepiece with reticle SB.6020-C is a wide-field measurement ocular designed for precise visual inspection and reticle-based alignment in laboratory and workshop microscopy Wide-field WF 20/10 eyepiece design Integrated reticle for precise measurements Suitable for measurement and inspection workflows Euromex quality and industrial compatibility Precision measurement where visual control matters The wide-field WF 20/10 layout delivers an enlarged apparent field of view, so measurement tasks benefit from improved situational awareness and faster target acquisition. The integrated reticle provides a fixed reference grid for repeatable alignment and simple comparative measurement. For users with limited metrology experience, a reticle translates angular and lateral offsets into immediately readable cues, reducing iterative trial-and-error and increasing throughput in routine inspection. Fast integration into visual inspection setups Designed as a measurement ocular, the accessory is compatible with standard optical inspection chains and is intended to be used alongside common tripod-mounted and bench microscopes. The ocular format permits straightforward swapping into an eyepiece tube without adjustments to primary imaging paths, enabling process continuity in lab and production environments. This configuration supports efficiency gains in quality-control routines and minimises downtime during tool or sample changes. Robust optical choice for industrial and educational use Constructed to meet the demands of frequent use, the measurement eyepiece pairs Euromex optical experience with a practical reticle for inspection and teaching. The fixed reticle eliminates the need for additional calibration accessories for many comparative tasks, making the component a reliable choice for workshops, training rooms and small-batch production. The emphasis is on consistent visual reference rather than electronic measurement, which simplifies maintenance and long-term reliability. Practical advice for measurement and care To preserve the accuracy of the reticle reference, routine cleaning with lens-safe materials and avoidance of mechanical shock are recommended. The optical designation WF 20/10 mm indicates a wide apparent field with an incorporated measuring grid; users should allow for eyepiece parallax when combining reticle readings with photographic documentation. If clarification on application or compatibility is required, technical guidance is available to help match the ocular to existing instrumentation and inspection procedures. For reticle-based measurement and reliable inspection, request application advice or a supply proposal from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SB.6020-C SKU: SB.6020-C Manufacturer: Euromex Product type: microscope eyepiece Core specifications Optical designation: WF 20/10 mm Feature: integrated reticle Special features Category: Messokulare (measurement eyepieces) Image file: SB.6020-C.jpg FAQ Is this eyepiece suitable for measurement tasks in production inspection? The WF 20/10 mm eyepiece with reticle SB.6020-C is specifically designed for measurement and alignment tasks and is suitable for production inspection where visual reticle references are acceptable. Can the reticle be used with camera-based imaging? The integrated reticle in the SB.6020-C provides a visual reference; when used with camera adapters, image capture may include the reticle depending on the optical train, allowing photographic documentation with the reticle visible. Does the ocular fit standard microscope eyepiece tubes? The eyepiece is provided as a microscope ocular intended for common eyepiece tubes; compatibility with specific instruments should be confirmed against the instrument's eyepiece specifications. How should the reticle be cleaned without damaging it? Clean the ocular surfaces with lens-safe cleaning fluid and a soft microfibre cloth, avoiding solvents and abrasive materials to preserve the reticle markings in the SB.6020-C. What applications benefit most from this eyepiece? Measurement eyepieces such as the WF 20/10 mm with reticle excel in alignment, comparative measurement and inspection tasks in workshops, educational settings and light-production quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm WF Precision Microscope Eyepiece 12mm Field, Ø30mm Tube - Euromex
Product data error: manufacturer's entry "Euromex" is not listed in the approved manufacturer directory, so a validated product description cannot be generated, which means that the system is unable to verify the accuracy or authenticity of the product details provided, potentially leading to discrepancies or issues in the cataloguing process, and it is recommended to cross-check the manufacturer's information against the authorised directory to ensure compliance with the established standards and avoid any potential misrepresentation or errors in the product database, as maintaining accurate and verified data is crucial for operational efficiency and customer trust in the system.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com