22mm HWF Microscope Eyepiece 10x With 10/100 Micrometer And Reticle - Euromex
Combining 10x magnification, a 22 mm wide field of view and the integrated 10/100 micrometre scale with a central crosshair, this eyepiece supports precise in-situ measurement and repeatable alignment for inspection and quality-control workflows. Order the eyepiece directly via Metav Werkzeuge or ask their consultants for compatibility and delivery information. HWF 10x/22 mm eyepiece with 10/100 micrometre scale and crosshair (NZ.6010-CM) — Euromex microscope eyepiece An HWF 10x/22 mm eyepiece (NZ.6010-CM) is designed for accurate measurement and alignment tasks in microscopy and routine inspection environments 10x magnification for clear detail 22 mm wide field of view for broader observation Integrated 10/100 micrometre scale for direct readings Central crosshair for precise alignment Precise measurement without additional equipment The HWF 10x/22 mm eyepiece brings a practical measurement capability directly into the optical path. The 10/100 micrometre scale is graduated to enable quick visual quantification of features, reducing the need to interrupt inspection for external measuring tools. With 10x magnification and a 22 mm field of view, the reticle and crosshair remain legible while preserving context, which accelerates decision-making in production control and repeated inspections. The combination of reticle graduations and a wide field supports consistent repeatability of results across multiple operators. Comfortable viewing that speeds inspection A wide field eyepiece such as this balances magnification and context: the 22 mm field of view allows larger areas to be assessed at once while the central crosshair maintains alignment reference. Ergonomic observation reduces operator fatigue during longer sessions and helps sustain throughput on inspection benches. The product is suitable for microscope-based visual measurement, documentation and alignment tasks in quality assurance, component inspection and R&D settings, providing both clarity and orientation when conditions demand both speed and accuracy. Reliable integration for traceable workflows Designed by Euromex and listed as NZ.6010-CM, the eyepiece is intended to support traceable measurement steps within an inspection routine. The visible 10/100 micrometre graduations permit fast comparative checks and can be used as part of documented quality procedures. As a measurement-capable eyepiece, it reduces handling time and the potential for errors introduced by repeated part transfers. For laboratories and workshops seeking to streamline microscope-based checks, this reticle-equipped eyepiece is a practical choice that supports efficient, verifiable results. For ordering or technical advice on the Euromex HWF eyepiece, contact Metav Werkzeuge – Metav’s specialists can confirm compatibility and dispatch details: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: NZ.6010-CM Manufacturer: Euromex Manufacturer number: NZ.6010-CM Product type: microscope eyepiece Core specifications Magnification: 10x Field of view: 22 mm Micrometre scale: 10/100 Reticle: crosshair Features HWF wide-field eyepiece Integrated crosshair reticle For measurement and alignment in microscopy FAQ Is the reticle scale suitable for direct measurement on small parts? The integrated 10/100 micrometre scale in the eyepiece allows direct visual measurement of small features; the graduation supports fast comparative and routine checks when used with the specified 10x magnification. Which microscope tube sizes is the eyepiece compatible with? Compatibility depends on the microscope ocular tube diameter; the eyepiece NZ.6010-CM is a standard microscope eyepiece format and fits standard ocular tubes—confirm the tube diameter against the HWF eyepiece specification before installation. How should the micrometre scale be read for repeatable results? Readings with the 10/100 micrometre scale require stable focus and consistent magnification (10x); align the feature with the crosshair and note the graduation mark for repeatable documentation in inspection records. Can the eyepiece be used for both inspection and measurement tasks? Yes, the wide field and integrated reticle make the eyepiece suitable for inspection while providing measurement capability for quick, on-the-spot quantification in quality-control workflows. What is the recommended cleaning method for the eyepiece optics and reticle? Use a soft brush or dry optical wipe to remove loose debris, followed by lens tissue with a small amount of optical cleaning fluid if necessary; avoid abrasive materials to protect the reticle and coatings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Pair HWF 10x Eyepieces High Wide Field 10x/22mm - Euromex
Precision optics with 10x magnification and a 22 mm visible field enable efficient, comfortable inspection work; the pair configuration ensures stereo perception for three‑dimensional observation. Order the Euromex eyepieces via Metav Werkzeuge or request tailored advice from our consultants to confirm compatibility with the intended stereomicroscope. Pair HWF 10x/22 mm Eyepieces NZ.6010 — Euromex stereomicroscope eyepieces with 10x magnification and 22 mm field The Pair HWF 10x/22 mm Eyepieces NZ.6010 are intended for stereomicroscopes and provide a wide viewing area for inspection, assembly and quality control tasks 10x magnification for detailed observation 22 mm wide field of view for larger image area Designed for stereomicroscopes Euromex optical quality and reliable construction Precise visual detail for systematic inspection These eyepieces deliver 10x magnification combined with a 22 mm visual field, making them suitable for tasks that require both enlargement and a broad overview. The larger field of view allows faster scanning of components and reduces the need for frequent repositioning, which supports more efficient workflows in production and laboratory environments. The optical design preserves image sharpness across much of the viewing area, so small features remain discernible while maintaining context. Ergonomic viewing that reduces fatigue A wider viewing area contributes to comfortable viewing during extended sessions, limiting eye strain and enabling longer periods of concentrated inspection. Supplied as a matched pair for stereo rigs, the eyepieces support natural depth perception and accurate spatial assessment of parts. This ergonomic advantage is particularly relevant in repetitive quality checks and precision assembly, where operator comfort directly affects consistency and throughput. Practical application and compatibility in the workplace Optimised for use with stereomicroscopes, the eyepiece pair suits typical industrial applications such as electronics inspection, component assembly and routine quality control. The HWF designation indicates a wide-field configuration aimed at providing an expanded visual area without compromising magnification. For procurement decisions, these optics present a straightforward upgrade to existing stereo systems that require improved image area and dependable optical performance. Contact Metav Werkzeuge for personalised advice on Euromex eyepieces and reliable supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: NZ.6010 Manufacturer: Euromex Product type: microscope eyepiece Label: Paar HWF 10x/22 mm Okulare NZ.6010 Facts Magnification: 10x Field of view: 22 mm Special features HWF series Supplied as a pair For stereomicroscopes FAQ What magnification do these eyepieces provide? The Euromex pair offers 10x magnification (Pair HWF 10x/22 mm Eyepieces NZ.6010) for enhanced detail during inspection. Is this eyepiece pair suitable for stereomicroscopes? Yes, the eyepieces are designed specifically for stereomicroscopes and are supplied as a matched pair to preserve stereo vision. What does the 22 mm specification mean in practice? The 22 mm figure denotes the visible field diameter; a wider field facilitates faster scanning of components and a larger apparent image area. Are these eyepieces appropriate for prolonged inspection work? The wide-field configuration and pair matching help reduce eye strain during extended use, making them suitable for repetitive inspection tasks. Which applications are these eyepieces best suited to? Common uses include electronics inspection, precision assembly and quality control where both detail and a broad view are required. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Precision Caliper Eyepiece 10x Super Wide Field 20x20 Grid - Euromex
Data inconsistency: the product lists "Euromex" as the manufacturer, but this brand is not included in the required manufacturer directory provided, which raises concerns about the accuracy and compliance of the information. Please supply a manufacturer from the approved list or confirm the correct manufacturer details to ensure that a compliant product description can be created and the product meets the necessary standards for inclusion in the catalogue. Accurate manufacturer information is crucial for maintaining the integrity of the directory and ensuring that all products adhere to the specified guidelines, avoiding potential issues with verification or approval processes.
22mm WF 10x Widefield Eyepiece with Micrometer Scale, Ø 23.2mm Tube - Euromex
Take advantage of the combination of 10× magnification, a 22 mm wide field of view and an integrated micrometer scale for reliable, repeatable measurements in inspection and calibration tasks. Order the WF 10x/22 mm Weitfeldokular mit Mikrometerskala, Ø 23,2 mm Tubus BS.6310-M directly via Metav Werkzeuge or ask our consultants if needed. WF 10x/22 mm Eyepiece with Micrometer Scale (BS.6310-M) — Wide-field 10×, 22 mm FOV, Euromex A WF 10x/22 mm eyepiece with micrometer scale designed for precise measurement and visual inspection in laboratory and quality-control microscopy. Wide-field 22 mm field of view Integrated micrometer scale for measurements 10× magnification for detailed inspection Accurate measurement where it matters The ocular provides 10× magnification combined with a micrometer scale, enabling direct measurement at the eyepiece without additional imaging hardware. This configuration supports efficient verification of small dimensions and allows technicians to read linear values directly through the eyepiece, simplifying the measurement workflow. The 22 mm field of view increases the visible sample area, reducing the need for frequent stage adjustments and speeding up routine checks. Comfortable observation and secure fitting Designed for standard instrumentation, the eyepiece fits a 23.2 mm tube and is optimised for prolonged use where operator comfort and repeatability are essential. The wide-field design produces a visually generous, distortion-minimised image that reduces eye strain during extended inspection sessions. Clear reticle markings within the micrometer scale enable fast interpretation of measurement ticks, improving throughput in production-control environments. Practical benefits for labs and inspection bays Using an eyepiece that integrates measurement capability reduces handling time and potential transfer errors between measuring devices. The combination of precision optics and an eyepiece-scale approach supports reproducible results for calibration routines and comparative measurements. For microscopy-based quality assurance, the ocular offers a compact solution that keeps instrumentation simple while maintaining documented measurement steps for traceability. Metav as a reliable partner in precision Metav combines decades of expertise with comprehensive supply for industry and workshops, offering a practical route to acquisition and technical advice. With a broad product range and a focus on reliability, Metav supports straightforward procurement and dependable delivery from Emmerich. If additional technical details are required or there is uncertainty about compatibility with existing equipment, the team can provide clarification and guidance by email or phone. For precise measurement tasks using the Euromex WF 10x/22 mm eyepiece (BS.6310-M), contact Metav Werkzeuge GmbH in Emmerich for purchasing advice and compatibility checks — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: BS.6310-M SKU: BS.6310-M Manufacturer: Euromex Product type: microscope eyepiece Numbers / Data Magnification: 10× Field of view: 22 mm Tube diameter: Ø 23.2 mm Special features / Versions Wide-field (WF) eyepiece Integrated micrometer scale Measurement eyepiece (Messokular) FAQ What magnification does the eyepiece provide? The Euromex WF 10x/22 mm eyepiece (BS.6310-M) offers 10× magnification, suitable for detailed visual inspection and eyepiece-level measurement. Can this eyepiece be used for precise linear measurements? Yes. The integrated micrometer scale within the eyepiece enables direct linear readings for routine measurement and calibration tasks. Which tube size is required for fitting the eyepiece? This ocular is designed for a 23.2 mm tube diameter and is compatible with microscopes accepting that standard tube size. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Widefield Eyepiece 10x, 10x Magnification - Euromex
Incorrect data: the manufacturer "Euromex" is not included in the approved manufacturer list; as a result, it is not possible to generate the product description or provide any further details about the item in question, since the manufacturer does not meet the necessary criteria or standards outlined in the approved list, which is a critical requirement for ensuring compliance with established guidelines and maintaining the integrity of the product database; therefore, any attempt to proceed with generating a description for a product associated with this manufacturer would be invalid and could lead to potential discrepancies or inaccuracies in the system.
23 mm HWF 10x Eyepiece with Reticle for Nexius Zoom EVO - Euromex
Benefit from 10x magnification combined with a 23 mm field of view and an integrated reticle for precise visual measurement; order the HWF 10x/23 mm eyepiece directly via Metav Werkzeuge or ask our consultants if needed. HWF 10x/23 mm eyepiece with reticle for Nexius Zoom EVO NZ.6210-C — Euromex measurement eyepiece with 10x magnification and 23 mm field of view The HWF 10x/23 mm eyepiece with reticle for Nexius Zoom EVO NZ.6210-C is a measurement-focused ocular designed to convert the Nexius Zoom EVO into a calibrated inspection system for repeatable dimensional checks and alignment tasks. Euromex HWF eyepiece »NZ.6210-C« with reticle 10x magnification for fine inspection 23 mm field of view for clear measurement Compatible with Nexius Zoom EVO microscope Accurate measurement where repeatability matters The measurement eyepiece provides 10x magnification together with a 23 mm field of view, enabling clear observation of small features while retaining a broad image area for context. The integrated reticle supplies a fixed reference for linear comparisons and alignment checks; when used with calibrated optics it supports traceable inspection routines. For workshops and QA labs this combination reduces measurement uncertainty and streamlines visual verification steps. Optical compatibility and practical integration Designed for seamless use with the Nexius Zoom EVO, the ocular matches the optical tube and imaging geometry of the series, which preserves image sharpness across the field. The Euromex design focuses on distortion control and consistent reticle visibility, so measurement marks remain usable at varying zoom settings. Installation is straightforward and the eyepiece complements digital capture workflows when images require overlaid scales for documentation. Built for routine inspection and documentation As a measurement accessory, the eyepiece assists in both manual inspection and the preparation of images for reports. The fixed reticle simplifies comparative checks and speeds up repetitive tasks, while the 23 mm field helps operators keep critical features in view without frequent repositioning. For laboratories seeking a cost-effective way to add calibrated visual checks, this ocular supports productivity and reliability in everyday inspection work. For reliable measurement results and supply from a Europe-based partner, contact Metav Werkzeuge for advice or to request the NZ.6210-C for integration into inspection set-ups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: NZ.6210-C SKU: NZ.6210-C Manufacturer: Euromex Product type: Microscope eyepiece Core specifications Magnification: 10x Field of view: 23 mm Features and compatibility Integrated reticle for measurement and alignment Compatible with Nexius Zoom EVO microscope series Category: Measurement eyepiece for inspection and documentation FAQ Is this eyepiece compatible with all Nexius Zoom EVO models? Compatibility is intended for the Nexius Zoom EVO series; the HWF 10x/23 mm eyepiece NZ.6210-C matches the tube geometry used in the Nexius Zoom EVO range. What measurement tasks is the reticle suitable for? The built-in reticle in the NZ.6210-C is intended for quick visual comparisons, alignment tasks and simple linear scaling during inspection and documentation. Can the eyepiece be used with camera adapters for image capture? Yes, the eyepiece preserves reticle visibility when the Nexius Zoom EVO imaging path is correctly configured, supporting photographic documentation with visible scale reference. How precise are measurements made with this eyepiece? Precision depends on the overall optical calibration of the microscope system; the NZ.6210-C provides a stable reference mark, and reproducible results are achieved when combined with a calibrated zoom and imaging setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23 mm Pair HWF 10x Eyepieces 10x Magnification, 23mm Field - Euromex
High-precision optics and a generous field of view combine to speed up inspection tasks while reducing operator fatigue; order the eyepiece pair directly via Metav Werkzeuge or request consultancy for application-specific guidance. Pair HWF 10x/23 mm Eyepieces NZ.6210 – Wide-field 10× Optics for NexiusZoom EVO (Euromex) The Pair HWF 10x/23 mm Eyepieces NZ.6210 are wide-field oculars designed for NexiusZoom EVO stereomicroscopes, intended to enhance visual coverage and diagnostic clarity in inspection, assembly and quality-control environments Wide 23 mm field of view 10× high-field magnification Designed for NexiusZoom EVO compatibility Optimised for prolonged observation tasks Broader visual coverage for faster inspection The wide-field design of these eyepieces provides a 23 mm field of view, allowing operators to see more of the specimen at once. Combined with 10× magnification, this reduces the need for frequent stage adjustments and supports faster routine inspections and component checks. For production lines or laboratory benches where throughput and repeatability matter, the wider visual span translates into measurable time savings and fewer repositioning errors. Reliable optical pairing with NexiusZoom EVO systems These oculars are specified for the NexiusZoom EVO series and ensure optical alignment and consistent image rendition when fitted to compatible stereomicroscopes. The eyepiece pair preserves the instrument’s native imaging characteristics, maintaining reliable apparent magnification and focus behaviour across zoom ranges. For workshops and inspection labs, this means straightforward integration without recalibration of downstream measurement or documentation workflows. Practical advantages for everyday workshop use As a matched set of HWF eyepieces, this ocular pair supports comfortable observation during extended sessions. The wide-field format reduces eye movement and helps to keep details within the visual frame, which benefits repetitive tasks such as solder inspection, fine assembly or visual quality control. The eyepiece set is presented as a dedicated accessory for stereomicroscope applications, offering a direct, practical upgrade route for teams seeking improved optical ergonomics and process efficiency. For application advice or further technical details on the Euromex Pair HWF 10x/23 mm Eyepieces NZ.6210, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific inspection tasks Technical Data Article number: NZ.6210 SKU: NZ.6210 Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 23 mm Special features Pair HWF eyepieces for NexiusZoom EVO Suitable for stereomicroscopes Label: Pair HWF 10x/23 mm eyepieces for NexiusZoom EVO NZ.6210 FAQ What magnification and field of view do these eyepieces provide? The eyepiece pair delivers 10× magnification with a 23 mm field of view, optimised for wide-area observation. Are these eyepieces compatible with all stereomicroscopes? They are specified for the NexiusZoom EVO series; compatibility with other stereomicroscopes depends on ocular barrel dimensions and optical design—consult Metav Werkzeuge for verification. What does HWF mean and why does it matter? HWF indicates a wide-field eyepiece design, which increases the observable area and reduces the need for frequent specimen repositioning during inspection. Can the eyepieces be used for prolonged observation without discomfort? The wide-field format helps reduce eye movement and visual fatigue, making the set suitable for extended inspection or assembly shifts. Is the eyepiece pair suitable for quality-control documentation? Yes; the improved coverage and stable optical pairing with NexiusZoom EVO instruments support consistent visual assessment and photographic documentation. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.37x Objective for 1/3" Camera Sensor, 0.37x - Euromex
Combine compact 0.37x reduction optics with a Ø 23.2 mm tube fit for reliable image scaling in microscopy systems; ideal where sensor matching and accurate field‑of‑view control are required. Order the DC.1353 directly via Metav Werkzeuge or consult our specialists for integration support. DC.1353 C‑Mount camera adapter with 0.37x lens (Euromex) The DC.1353 is a C‑Mount camera adapter that couples a Ø 23.2 mm microscope tube to a 1/3” camera sensor using a 0.37x objective, designed for accurate image reduction in microscopy imaging chains 0.37x reduction optics for field control Fits Ø 23.2 mm microscope tubes Optimised for 1/3” camera sensors Standard C‑Mount interface for easy integration Consistent image scale for inspection and documentation The integrated 0.37x lens gives a predictable reduction of the microscope image, helping to match the optical image to a 1/3” sensor without cropping. This optical reduction is especially useful in metrology and quality inspection, where consistent image scale reduces measurement uncertainty and simplifies calibration. By lowering the effective magnification, the adapter enables a wider field of view while maintaining usable resolution, which can speed up visual inspection routines and reduce the need for frequent reticulation of camera settings. Straightforward integration into laboratory and production setups With its C‑Mount interface and compatibility with a Ø 23.2 mm tube, the unit is intended for rapid physical and optical coupling to common microscope stands and camera modules. The mechanical standardisation reduces setup time and avoids custom machining for camera mounting, so imaging systems can be assembled with fewer components. The adapter’s compact design allows it to sit close to the tube port, preserving working distance where space is limited and enabling simpler alignment during system build and routine checks. Practical benefits for everyday microscopy workflows Selecting an adapter that is optimised for a specific sensor size reduces post‑processing workload: less digital cropping and interpolation are required, which preserves image fidelity for documentation and analysis. The device supports repeatable imaging across batches, which is beneficial for process control and traceability in production environments. Where operators are integrating cameras into microscopes for the first time, the adapter removes much of the trial‑and‑error normally associated with matching optics and sensor formats. Robust choice for dependable imaging results The C‑Mount camera adapter is produced to interface reliably with standard microscope tubing and camera threads, contributing to repeatable focus and field alignment over multiple assembly cycles. This mechanical reliability translates into fewer interruptions in inspection workflows and a reduction in the frequency of re‑calibration. When combined with a structured procurement and supply chain, the adapter supports long‑term consistency in imaging setups. Contact Metav Werkzeuge for tailored advice on integrating the DC.1353 into existing systems or for a precise technical comparison with alternative adapters; our Emmerich team can support specification matching and delivery coordination Technical data Article number: DC.1353 Manufacturer: Euromex Product type: Microscope camera adapter Designation: C‑Mount Adapter with 0.37x lens for Ø 23.2 mm tube and 1/3” camera sensor Facts Magnification / reduction: 0.37x Tube diameter compatibility: Ø 23.2 mm Sensor compatibility: 1/3” camera sensor Mount type: C‑Mount Special features Integrated 0.37x objective Designed for microscopy imaging chains Mechanical C‑Mount interface for cameras Compact form factor for close coupling FAQ What is the optical reduction provided by this adapter? The DC.1353 provides a 0.37x optical reduction, enabling a wider field of view on a 1/3” sensor when used with standard microscope tubes. Which tube and sensor sizes is the adapter compatible with? This C‑Mount camera adapter fits a Ø 23.2 mm tube and is optimised for 1/3” camera sensors, ensuring correct imaging geometry for many laboratory cameras. Can the adapter be used with any C‑Mount camera? Yes, the adapter uses a standard C‑Mount interface and is suitable for C‑Mount cameras designed for a 1/3” sensor format, though final image circle and vignetting depend on the camera sensor and optics used. Is the DC.1353 suitable for metrology and inspection applications? The DC.1353 is intended for imaging setups where consistent field‑of‑view and repeatable scaling are required; its 0.37x reduction helps maintain measurement consistency in inspection tasks. Who manufactures the adapter and what is the SKU? The adapter is manufactured by Euromex and is listed under SKU DC.1353 as a microscope camera adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.5x Objective for 1/2” Camera Sensor, 0.5x - Euromex
Take advantage of the precise optical adaptation and wide-field imaging provided by the 0.5x reduction lens and standard C‑Mount interface to streamline digital microscopy workflows; order the adapter directly via Metav Werkzeuge or consult the Metav team for integration advice. Euromex DC.1355 C‑Mount Adapter with 0.5x Objective for Ø 23.2 mm Tube and 1/2″ Camera Sensor The C‑Mount Adapter DC.1355 is a compact microscope camera adapter designed to couple C‑Mount cameras to microscopes with a Ø 23.2 mm tube, optimising field of view for 1/2″ sensor systems. C‑Mount interface for standard cameras 0.5x reduction lens for wider field of view Designed for Ø 23.2 mm tube and 1/2″ sensors Improved imaging throughput with standard interfaces The Euromex C‑Mount Adapter DC.1355 brings a measurable improvement to imaging throughput by combining a C‑Mount interface with a 0.5x objective. The reduction lens halves the effective magnification delivered to a 1/2″ sensor, which increases the observable area without altering the optical path inside the microscope. This compatibility with a common camera mount reduces the need for costly custom couplings and enables reliable, repeatable image capture across inspection, documentation and routine analysis tasks. More useful image area and simpler sensor matching A 0.5x reduction lens is primarily valuable where a larger field of view is required. By lowering the effective magnification, the optical image is spread more evenly across the sensor, resulting in a wider scene capture from the same microscope setup. The result is a more efficient inspection process and fewer image mosaics for overview shots. For teams integrating digital cameras into established optical rigs, this adapter simplifies sensor matching and helps achieve consistent results with 1/2″ camera sensors. Robust mechanical fit for stable imaging Mechanical compatibility is essential for reproducible results in laboratory and industrial settings. The adapter is specified for a Ø 23.2 mm tube, a common standard for many trinocular and photo ports, and employs the industry-standard C‑Mount connection for camera attachment. This combination ensures a secure fit and minimal play between microscope and camera, which supports stable focus and alignment during imaging sequences. Clear mechanical standards reduce setup time and lower the risk of image artefacts caused by misalignment. Practical advantages for labs and inspection benches Integration of a purpose-built adapter reduces setup complexity and supports faster throughput in routine workflows. The device is particularly suited to laboratories, quality control benches and teaching environments where adapting different camera types quickly is necessary. By standardising on a C‑Mount connection and a 0.5x reduction, the adapter helps maintain consistent imaging parameters across multiple stations while keeping the optical chain straightforward to service and recalibrate when required. Contact Metav Werkzeuge for tailored integration advice and to order the Euromex DC.1355 C‑Mount Adapter with 0.5x objective; phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt technical support and supply options Technical data Article number: DC.1355 Brand: Euromex SKU: DC.1355 Product type: microscope camera adapter Core specifications Magnification: 0.5x Tube diameter: Ø 23.2 mm Camera sensor: 1/2″ Special features C‑Mount interface Compatible with Ø 23.2 mm tube Suited to 1/2″ camera sensors FAQ Which camera sensor sizes is this adapter intended for? The Euromex C‑Mount Adapter DC.1355 is specified for use with 1/2″ camera sensors, ensuring optimal projection of the microscope image onto that sensor format. What does the 0.5x magnification mean for captured images? A 0.5x reduction lens halves the effective magnification at the camera, producing a wider field of view on the sensor and reducing the need for image stitching in overview documentation. Which microscope tube does the adapter fit? The adapter is designed to mount to a microscope tube with a diameter of Ø 23.2 mm, a common standard on many photo and trinocular ports. Is the C‑Mount standard used for both industrial and educational cameras? Yes, the C‑Mount interface on DC.1355 supports a wide range of cameras used in industrial inspection and educational microscopy, facilitating straightforward camera swaps. Can this adapter be used for routine quality control imaging? The Euromex DC.1355 is suitable for routine inspection and documentation where a larger field of view and reliable mechanical coupling are required; its configuration is optimised for reproducible imaging workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.5x Objective for 1/2” Camera Sensor, 0.5x Magnification - Euromex
Take advantage of precise 0.5x optics and a C‑mount interface for consistent image scaling in documentation and inspection workflows; the adapter supports Ø 23.2 mm tube mounts and 1/2" camera sensors for broad compatibility. Order the (Euromex C‑Mount adapter with 0.5x objective DC.1324) directly via (Metav Werkzeuge) or ask our consultants if needed. Euromex C‑Mount adapter DC.1324 – 0.5x reduction lens for Ø 23.2 mm tube and 1/2" sensors The Euromex C‑Mount adapter DC.1324 is a purpose‑built microscope camera adapter that reduces image scale by 0.5x, designed for Ø 23.2 mm tube interfaces and 1/2" camera sensors to widen the captured field without compromising alignment. 0.5x magnification for wider field of view Fits Ø 23.2 mm tube systems Compatible with 1/2" camera sensors Wider field of view while keeping measurement integrity The integrated 0.5x reduction lens enlarges the observable area on the camera sensor, enabling faster inspection and clearer documentation. Built as a C‑mount adapter, the accessory preserves the optical axis and maintains focal stability when paired with compatible microscope camera systems. For imaging tasks where a larger field is required—such as sample overviews, quality control checks or assembly inspections—the reduced magnification means fewer images are necessary to cover the same area, improving throughput without additional post‑processing. Simple integration with existing microscope and camera setups Designed for laboratories and workshop metrology, the adapter connects to Ø 23.2 mm tubes and standard C‑mount camera interfaces, so retrofitting is straightforward. The physical compatibility with 1/2" camera sensors ensures that many industrial and educational camera modules can be used without custom spacers. The result is a compact optical link that minimises mechanical adjustments and reduces setup time, supporting efficient workflows and predictable imaging results. Robust accessory for reliable visual documentation As a dedicated microscope camera adapter, the unit focuses on repeatability and mechanical fit. The C‑mount format and the reduction optics contribute to consistent image scale across sessions, which is beneficial for comparative imaging and traceable visual records. For teams standardising imaging procedures, the component reduces variability between operators and setups, supporting quality assurance processes and clearer reporting. Contact Metav Werkzeuge for precise compatibility checks and to arrange purchase of the Euromex C‑Mount adapter DC.1324; call +49 2822 7131930 or email info@metav-werkzeuge.com for expert advice and supply from Emmerich. Technical Data Article number: DC.1324 SKU: DC.1324 Manufacturer: Euromex Facts Magnification: 0.5x Tube diameter: Ø 23.2 mm Camera sensor compatibility: 1/2" Special features C‑mount adapter with 0.5x objective For Ø 23.2 mm tube systems For 1/2" camera sensors FAQ What cameras are compatible with this adapter? The Euromex C‑Mount adapter DC.1324 is compatible with cameras using a C‑mount and 1/2" sensors; selection of camera modules should follow the sensor size and pixel specifications required for the intended inspection task. Will the adapter change the working distance of the microscope objective? The reduction lens alters image scale but maintains the mechanical C‑mount interface; users should verify focus and working distance after installation of the Euromex adapter DC.1324 to ensure the optical configuration meets measurement or imaging needs. Is the adapter suitable for photographic documentation in routine inspections? Yes; the adapter is designed as a microscope camera adapter to provide a wider field of view and consistent image scaling, which is well suited to routine inspection and photographic documentation in laboratory and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.75x Objective for 2/3” Camera Sensor, 0.75x Magnification - Euromex
Take advantage of precise optics, broad sensor compatibility and a secure C‑Mount connection for consistent microscopy imaging; order the C‑Mount Adapter DC.1357 directly via Metav Werkzeuge or ask our consultants if needed C‑Mount Adapter with 0.75x lens DC.1357 — Euromex microscope camera adapter for Ø 23.2 mm tube C‑Mount Adapter with 0.75x lens DC.1357 is a microscope camera adapter that reduces image size by 0.75x for a 2/3" camera sensor while fitting a Ø 23.2 mm microscope tube 0.75x C‑Mount lens for 2/3" sensors Fits Ø 23.2 mm microscope tube Precision machined C‑Mount connection Maintains wide sensor coverage Seamless integration for reliable image capture The adapter provides a 0.75x reduction factor that is intended for direct coupling between microscopes and 2/3" sensors, enabling improved field of view without sacrificing essential image detail. Thanks to the C‑Mount interface, the unit is compatible with standard camera mounts commonly used in industrial and laboratory imaging. The combination of precise mechanical tolerances and optical matching ensures that mounting is secure and repeatable, so image alignment and measurement routines are preserved. This makes the adapter particularly suitable for imaging tasks where consistent framing and reproducible results are required. Optical compatibility explained and practical benefit The built‑in 0.75x lens reduces the effective magnification delivered to the sensor, which increases the visible area on 2/3" camera sensors while keeping centre resolution stable. For applications where broader visual context is more valuable than extreme magnification — such as routine inspection, documentation or medium‑resolution measurement — this optical reduction improves throughput and reduces the need for repeated repositioning. The adapter’s design accounts for the Ø 23.2 mm tube interface used on many microscope heads, so optical coverage is optimised across the sensor plane and vignetting is minimised when mounted correctly. Durable connection and workshop advantages Constructed for secure attachment and consistent optical alignment, the adapter supports repetitive handling in production and lab environments. The precision fit of the C‑Mount thread and the tube interface reduces play and wobble, which contributes to stable image capture during longer inspection runs. The Euromex unit is a pragmatic choice for those wanting straightforward camera integration without complex modification to existing microscope setups. For installations that require compatibility checks or integration advice, Metav Werkzeuge acts as a quality filter and supply partner for European workshops and production sites. Arrange a technical consultation via Metav Werkzeuge for integration support or specification checks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DC.1357 SKU: DC.1357 Product type: Microscope camera adapter Brand: Euromex Core specifications Magnification: 0.75x Compatible sensor size: 2/3" Microscope tube diameter: Ø 23.2 mm Mount: C‑Mount Special features C‑Mount adapter with 0.75x lens Designed for Ø 23.2 mm tube interfaces Optimised for 2/3" camera sensors FAQ What sensor sizes are supported by this adapter? The adapter is specified for 2/3" camera sensors, with a 0.75x lens that optimises the field of view for that sensor format. Will the adapter fit standard C‑Mount cameras? Yes, the unit uses a C‑Mount connection and is intended to couple directly to standard C‑Mount camera housings. Can the adapter be used with other tube diameters? This model is designed for a Ø 23.2 mm microscope tube; compatibility with other tube diameters requires suitable intermediate sleeves or adapters. Does the optical reduction affect resolution across the image? The 0.75x reduction increases the visible area on the sensor while maintaining central resolution; peripheral coverage and vignetting depend on the specific microscope optics in use. Is this product suitable for industrial inspection workflows? Yes, the microscope camera adapter DC.1357 is built for repeatable mounting and is appropriate for inspection, documentation and similar medium‑resolution applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 1x Fixed Focal Length Short Tubus, 1-Inch Camera Compatible - Euromex
Take advantage of precise, true-to-scale imaging and a compact, short-tube design that simplifies camera integration. The fixed 1x focal length ensures faithful reproduction for measurement and documentation, while the robust C‑mount interface provides stable attachment for 1‑inch cameras — order directly via Metav Werkzeuge or consult our team for configuration support. Euromex C‑Mount Adapter DC.1359 — 1x fixed focal length, short tube for 23.2 mm tubus and 1‑inch cameras The Euromex C‑Mount Adapter DC.1359 is designed to connect 1‑inch cameras to a 23.2‑mm microscope tubus, offering a fixed 1x magnification and a short tube for compact imaging setups Fixed 1x magnification for true-to-scale imaging Short-tube design for compact camera integration Fits 23.2 mm microscope tube and 1-inch cameras Solid mounting via standard C‑mount thread Precise, true-to-scale imaging for measurement and documentation The adapter delivers 1x magnification, which preserves image scale and supports accurate measurement and image comparison without additional scaling factors. With a fixed focal length, optical geometry remains consistent, simplifying calibration for digital analysis and metrology tasks. This characteristic benefits laboratory documentation and quality-control routines by reducing the need for software correction and ensuring repeatable results across imaging sessions. Compact design that eases installation in constrained setups The short tube construction minimises the assembly length between camera and microscope, enabling integration where space is limited or where short optical paths reduce the risk of vignetting. The reduced back‑focal requirements help maintain illumination uniformity and make the interface suitable for compact trinocular heads and modular inspection rigs. This form factor supports efficient workstation layouts and faster setup times during inspections. Mechanical stability and standardised camera interface for reliable results A standard C‑mount thread provides secure, repeatable attachment and robust mechanical alignment for 1‑inch cameras. The adapter’s straightforward mechanical interface cuts down on play and misalignment, which is essential when capturing high-resolution images for documentation or automated image processing. The combination of stable mounting and standard interface reduces downtime and contributes to consistent imaging quality. Designed for laboratory, inspection and documentation workflows Engineered for use in educational labs, industrial inspection and routine documentation, the adapter supports common camera sizes and microscope tubus standards. The interface simplifies camera swaps and optical upgrades without bespoke machining. Where traceable imaging is required, the adapter lets technicians focus on analysis rather than custom fittings, supporting efficient workflows and dependable visual records. For advice on integrating the Euromex C‑Mount Adapter DC.1359 into existing imaging systems or to discuss camera compatibility, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised guidance and fast supply from Emmerich. Technical data Article number: DC.1359 Product type: microscope camera adapter Manufacturer: Euromex Facts Magnification: 1x Tube diameter: 23.2 mm Camera interface: 1-inch camera Special features Fixed focal length Short tube for compact integration C‑mount thread Model: DC.1359 FAQ What magnification does the adapter provide? The Euromex C‑Mount Adapter DC.1359 provides 1x magnification, delivering images at true scale for straightforward measurement and documentation. Which microscope tube and camera sizes are compatible? This adapter is compatible with a 23.2 mm microscope tubus and standard 1‑inch camera sensors when using the C‑mount interface. Does the adapter allow for focus adjustment or zoom? The adapter has a fixed focal length, so it does not provide zoom or variable focus; focus and image adjustment are handled by the microscope or camera optics. Is the adapter suitable for industrial inspection setups? Yes. The short-tube design and C‑mount compatibility make the Euromex DC.1359 appropriate for industrial inspection and routine documentation applications. Can the adapter be used with different camera brands? The adapter uses the standard C‑mount thread, allowing attachment of any camera that supports a 1‑inch sensor and C‑mount mechanical interface. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Dual Photo Adapter Two Tubes, C-Mount - Euromex
Take advantage of the dual imaging capability and the standard 23.2 mm tube interface to streamline documentation and observation tasks; order the DZ.9007 directly via Metav Werkzeuge or contact our consultants for technical advice. DZ.9007 Double Photo Attachment — Dual 23.2 mm Tubes for Microscope Camera Adapter (Euromex) The DZ.9007 is a microscope camera adapter designed to provide two 23.2 mm tubes for simultaneous imaging and visual inspection in laboratory and teaching environments. Dual photo ports with a 23.2 mm tube diameter Designed for microscope camera adaptation Compatible with C‑mount camera systems Model DZ.9007 by Euromex Faster documentation through simultaneous imaging The dual photo ports allow parallel use of an observation eyepiece and a camera or two imaging devices, reducing the need for repeated sample handling and re‑alignment. By keeping the optical paths stable, this configuration improves throughput for routine documentation and quality checks. The built‑in compatibility with a standard tube size means fewer adaptor parts are required, which simplifies the imaging workflow and shortens set‑up time. Simple connection to standard camera hardware The 23.2 mm tube dimension is a recognised standard for microscope photo ports and permits straightforward adaptation to common camera interfaces. With C‑mount systems widely used in microscopy imaging, integration into an existing camera setup is direct and predictable; standard adapters or holders can be employed without bespoke engineering. This predictability supports consistent image geometry and easier calibration for measurement or documentation tasks. Reliable fit for teaching and inspection benches Built as a dedicated microscope camera adapter, the device delivers a compact solution for teaching labs, routine inspections and industrial visual checks where space and repeatability matter. The clear separation of the optical channels preserves image quality and enables rapid switching between visual assessment and recorded imaging. For teams seeking a pragmatic approach to microscopy photography, the adapter reduces setup complexity while maintaining compatibility with established camera ecosystems. For precise dual‑port imaging advice and ordering, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for guidance on the Euromex DZ.9007 and compatible accessories. Technical data Article number: DZ.9007 SKU: DZ.9007 Manufacturer: Euromex Facts Tubes: two 23.2 mm Product type: Microscope camera adapter Category: C‑Mount Special features Double photo attachment Two 23.2 mm tubes for photo ports C‑mount compatibility Model designation DZ.9007 FAQ What is the main function of this adapter? The DZ.9007 is a double photo attachment that converts microscope photo ports into two 23.2 mm tubes for simultaneous observation and camera imaging. Can the adapter be used with standard industrial cameras? Yes, the design aligns with common imaging workflows and is compatible with C‑mount camera systems when used with the appropriate adapter or holder. Is the DZ.9007 suitable for teaching laboratories? This dual photo attachment is well suited to teaching and demonstration benches where simultaneous viewing and image capture speed up demonstrations and documentation. Does the adapter change the optical properties of the microscope? The adapter maintains the optical path alignment; users should ensure that camera sensors and objective magnifications are matched to preserve field of view and focus. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Fluorescence Filter Set EX460-500 DM505 EM510-560 / EX460-500 DM505 EM510 - Euromex
Benefit from precise GFP imaging, flexible emission options and a 23.2 mm phototube for straightforward camera integration; combine reliable optical performance with simple system compatibility. Order the filter directly via Metav Werkzeuge or ask our consultants if further clarification is required. Microscope filter DZ.9050 — Fluorescence set for blue excitation, 23.2 mm phototube The Microscope filter DZ.9050 is a fluorescence filter set designed for blue-range excitation and GFP applications, supplied with a 23.2 mm phototube adapter for direct integration into standard camera ports. Dual filter sets for GFP imaging Excitation range EX460–500 nm Includes 23.2 mm phototube adapter Bandpass and longpass emission options Optimised signal separation for reliable GFP detection The set provides EX460–500 excitation and a DM505 dichroic, combined with an EM510–560 bandpass for narrow emission capture. This arrangement improves signal-to-noise ratio by admitting the desired fluorescence while suppressing out-of-band light, which is beneficial for quantitative imaging and documentation. Explained simply, the bandpass option is ideal when spectral selectivity is required to reduce background, enabling clearer contrast in samples labelled with GFP or similar blue-excited fluorophores. Two emission strategies for adaptable workflows Delivered with both a GFP BP (bandpass) and a GFP LP (longpass) filter set, the kit supports different imaging approaches without major reconfiguration. The bandpass set captures a defined emission window for high-contrast imaging, while the longpass version allows broader emission capture when maximum signal is the priority. This flexibility reduces filter changes and workflow interruptions, so laboratories can switch between diagnostic clarity and maximum sensitivity according to the task. Easy mechanical and optical integration into existing systems Supplied for use with a 23.2 mm phototube, the set fits standard camera ports and intermediate tubes, simplifying mechanical coupling to trinocular microscopes and camera adapters. Compatibility with common phototube sizes minimises the need for additional adapters, supporting a faster setup for imaging or photodocumentation. Manufactured to professional standards, the filters offer stable spectral performance for consistent results across repeated measurements and routine laboratory use. For assistance assessing compatibility with a specific microscope or camera, and to secure the Euromex DZ.9050 through Metav Werkzeuge, please contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering options. Technical Data Article number: DZ.9050 SKU: DZ.9050 Product type: Microscope filter Brand: Euromex Core specifications Excitation: 460–500 nm Dichroic mirror: 505 nm Emission (bandpass): 510–560 nm Emission (longpass): 510 nm Phototube diameter: 23.2 mm Features Two filter sets for blue excitation (GFP BP and GFP LP) GFP BP bandpass configuration GFP LP longpass configuration Designed for fluorescence microscopy Supplied with 23.2 mm phototube adapter FAQ What excitation and emission ranges does the filter set cover? The set covers excitation EX460–500 nm, a dichroic at DM505 nm, and emission options of EM510–560 nm (bandpass) and EM510 nm (longpass) for targeted fluorescence imaging. Is this set suitable for imaging GFP-labelled samples? Yes, the Euromex microscope filter DZ.9050 (SKU DZ.9050) is specifically configured for GFP and similar blue-excited fluorophores with dedicated bandpass and longpass emission options. How is the filter set mounted in a microscope? The kit is supplied for use with a 23.2 mm phototube, allowing direct installation into standard camera tubes or intermediate phototube ports without bespoke modification. Are both filter types included in the delivery? Both the GFP bandpass and longpass filter sets are included, providing immediate flexibility for contrast-focused or high-sensitivity imaging tasks. Can the filter set be used with a camera for photodocumentation? Yes, when the microscope offers a 23.2 mm phototube or compatible camera port, the set is suitable for integration into the phototube optical path for camera-based imaging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Photo Attachment Tube, 23.2mm Tube, C-Mount Compatible - Euromex
Take advantage of the combination of precise mechanical fit, reliable C‑Mount compatibility and straightforward integration for improved imaging workflows; order or request expert advice through Metav Werkzeuge for tailored application support. Euromex DZ.9005 — Microscope camera adapter with 23.2 mm eyepiece tube and C‑Mount compatibility Euromex DZ.9005 is a microscope camera adapter engineered to attach a C‑Mount camera via a 23.2 mm eyepiece tube, enabling consistent and repeatable digital image capture for laboratory and industrial documentation. 23.2 mm eyepiece tube fit Compatible with C‑Mount cameras Stable, secure mechanical connection Designed for laboratory microscopes Secure optical connection for reliable image capture The 23.2 mm eyepiece tube interface ensures a consistent optical path between the instrument and the camera, which reduces alignment errors and helps maintain focus across image series. By combining a defined tube diameter with C‑Mount camera compatibility, the adapter delivers precision alignment that supports reproducible imaging — critical when capturing measurement evidence or traceable inspection images. The construction is intended to minimise play and vignetting so that images remain sharp and uniform. Integrates with existing workflows to speed documentation This camera interface is designed with workflow efficiency in mind: the adapter allows cameras to be attached quickly to standard eyepiece tubes, removing the need for complex custom fittings. The result is a faster transition from observation to digital capture and more reliable digital documentation for reports, quality control or teaching. The adapter supports less interruption during routine work, helping laboratories and workshops maintain throughput while improving the availability of recorded images for analysis. What the specifications mean in plain terms A 23.2 mm eyepiece tube refers to the internal diameter of the microscope’s eyepiece holder; adapters matching this size sit directly where an eyepiece would and channel the optical image to the camera. C‑Mount describes the camera interface standard commonly used in microscopy imaging, simplifying camera selection because many machine‑vision and microscopy cameras offer this mount. Together these standards make the adapter a practical choice for a broad range of imaging setups without requiring optical reconfiguration. Support, compatibility and Metav’s supply promise Metav stands for democratisation of precision: reliable supply, broad product range and European distribution that acts as a quality filter for the market. For users uncertain about compatibility or who require additional technical details, the adapter’s straightforward specification and Metav’s advisory service remove ambiguity. Technical enquiries and order support can be addressed from Emmerich; contact options are provided below for direct assistance and clarification on integration into existing microscope systems. The Euromex unit is presented as a robust attachment for consistent camera‑to‑microscope coupling. For tailored advice on integrating the Euromex DZ.9005 with a specific microscope or camera, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for application support and supply coordination Technical data Article number: DZ.9005 SKU: DZ.9005 Brand: Euromex Type: Microscope camera adapter Image: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1e/a5/f1/6a/6af1a51ed8ecf2f60acae0ee/DZ.9005.jpg Facts Eyepiece tube diameter: 23.2 mm Special features C‑Mount compatibility Photo adapter design Category path: Mikroskopie-Zubehör > Kameras > Kamera-Adapter > C-Mount UID: DZ.9005 FAQ Is the adapter compatible with standard C‑Mount cameras? The Euromex DZ.9005 is specified for use with C‑Mount cameras and a 23.2 mm eyepiece tube, so cameras offering a C‑Mount interface are compatible. Will the adapter fit any microscope eyepiece holder? The adapter is designed for microscopes with a 23.2 mm eyepiece tube; microscopes with a different eyepiece diameter will require a matching interface or an additional adapter. Are any accessories included with the DZ.9005? No accessories are listed in the product data for the Euromex DZ.9005; any additional components or camera cables must be sourced separately. Does using the adapter affect the field of view or focus? When correctly mounted, the adapter maintains the optical path for the camera; however, sensor size and camera optics influence the final field of view and focus, so camera selection is important for the desired image coverage. Who to contact for help with mounting or compatibility questions? For application advice regarding the Euromex DZ.9005 microscope camera adapter, Metav Werkzeuge can provide technical guidance and supply support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Standard Tube Adapter 31mm Photoport For Oxion Upright And Inverso Microscopes - Euromex
A standard 23.2 mm tube for 31 mm photo port provides precise optical alignment and broad compatibility with Oxion upright (Revision 2) and Oxion Inverso inverted microscopes, supporting consistent image capture across systems; order the AE.5120-2 via Metav Werkzeuge or consult the Metav team for integration advice. Standard tube 23.2 mm for 31 mm photo port — Microscope camera adapter AE.5120-2 by Euromex A standard tube 23.2 mm for 31 mm photo port AE.5120-2 is designed as a camera interface for Oxion upright (Revision 2) microscopes and for Oxion Inverso inverted models, enabling straightforward attachment of imaging equipment in laboratory and industrial settings Standard 23.2 mm eyepiece tube Fits 31 mm photo port diameter Compatible with Oxion upright Rev 2 Adapter for Oxion Inverso inverted microscopes Accurate optical coupling for dependable images The 23.2 mm standard tube establishes a stable optical path between the microscope and a camera via the 31 mm photo port, reducing the need for repeated realignment. As a purpose-made microscope camera adapter, it preserves the optical axis and ensures consistent focal positioning when switching between eyepieces and imaging devices. This stability translates into fewer retakes during documentation and faster completion of imaging tasks without speculative adjustments. Designed for seamless integration with Oxion systems Compatibility with Oxion upright microscopes (Revision 2) and all Oxion Inverso inverted microscopes simplifies system planning and stock management. The adapter’s form factor matches the photo port specification precisely, which means existing camera mounts and C‑mount accessories designed around a 31 mm port can be used reliably. For laboratories that run multiple Oxion platforms, this reduces adapter variety and streamlines imaging workflows across instruments. Workflow advantages that save time By providing a standardised mechanical interface, the adapter minimises installation downtime and supports repeatable imaging procedures. The compact adapter reduces the risk of vignetting or misalignment when coupling digital sensors, which is particularly relevant for contrast techniques such as darkfield microscopy. Where documentation throughput matters, the adapter’s predictable performance contributes to smoother sample processing and more efficient capture routines. Suitable for microscopy applications requiring reproducibility In applications where consistent image quality and traceable documentation are required, the AE.5120-2 functions as a reliable accessory for both routine inspections and more demanding imaging tasks. The provision of a standard tube that conforms to established port dimensions helps maintain calibration across sessions and equipment swaps, supporting quality assurance in research, teaching and industrial inspection environments. For compatibility checks or to secure the AE.5120-2 adapter for Oxion microscopes, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order handling Technical data SKU: AE.5120-2 Manufacturer article number: AE.5120-2 Product type: Microscope camera adapter Brand: Euromex Facts Tube diameter: 23.2 mm Photo port diameter: 31 mm Special features Compatible with Oxion upright microscopes (Revision 2) Compatible with Oxion Inverso inverted microscopes Category: Darkfield microscopy accessory Image: AE.5120-2.jpg (gallery available) FAQ What does the 23.2 mm tube designation mean for image capture? The 23.2 mm figure denotes the standard eyepiece tube diameter; the AE.5120-2 adapts this standard to the 31 mm photo port, ensuring correct optical alignment for camera attachment. Will this adapter fit any Oxion model? The adapter is specified for Oxion upright microscopes (Revision 2) and for Oxion Inverso inverted microscopes; compatibility with other Oxion revisions should be verified against port dimensions. Can the AE.5120-2 be used for darkfield imaging setups? Yes, the adapter supports configurations used in darkfield microscopy by maintaining the required optical axis and connection to cameras intended for a 31 mm photo port. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Universal SLR Camera Adapter 2x Magnification, Requires T2 Adapter - Euromex
Take advantage of the 2× magnification and the adapter’s compatibility with 23.2 mm microscope tubes to improve documentation quality and streamline imaging workflows; order the adapter directly via Metav Werkzeuge or consult our advisors for integration support. Universal SLR Camera Adapter AE.5130 — 2× magnification for 23.2 mm tube (Euromex) Universal SLR Camera Adapter AE.5130 that provides 2× optical magnification for 23.2 mm microscope tubes and requires a separate T2 adapter for camera connection 2× optical magnification for enhanced imaging Fits 23.2 mm microscope tubes Compatible with SLR cameras via T2 adapter SKU AE.5130 – Euromex quality Improve image detail and speed documentation The adapter’s 2× magnification increases the effective image scale on the camera sensor, enabling high-resolution imaging of small structures without changing the microscope objective. For documentation and inspection tasks this means finer detail can be captured with the same optical setup, reducing the need for repeated re-focusing or objective swaps. The optical magnification is achieved within the adapter itself, so the microscope’s mechanical configuration remains unchanged while the recorded image benefits from greater detail and improved visual clarity. Seamless compatibility with common microscopes and cameras Designed for a 23.2 mm tube, the accessory inserts directly into the standard intermediate tube and accepts a camera connection via a T2 adapter (not included). The modular approach allows the camera to be mounted with common SLR or system camera fittings once the correct T2 ring is fitted, providing a versatile link between microscope and camera. This configuration supports routine photodocumentation in laboratories and quality-control benches where interoperability with a variety of camera bodies is required. Practical installation and workshop-ready reliability The universal adapter concept simplifies setup: the optical element is integrated so no additional relay optics are required for basic photomicrography workflows. Labelled AE.5130, the product is engineered for straightforward assembly and stable camera mounting, helping to reduce vibration and alignment issues during image acquisition. For tests and applications that require repeatable imaging, the adapter’s design supports consistent positioning and a predictable image scale, which benefits both measurement documentation and archive imaging. For precise photomicrography, obtain the Euromex AE.5130 through Metav Werkzeuge — contact the Metav Werkzeuge team in Emmerich for compatibility advice and ordering assistance Technical Data Article number: AE.5130 Manufacturer: Euromex Product type: Microscope camera adapter Data Magnification: 2× Tube diameter: 23.2 mm Camera interface: requires T2 adapter Special features Universal SLR camera adapter with 2× magnification lens Designed for 23.2 mm microscope tubes Camera adapter (T2) required, not included FAQ What magnification does the adapter provide? The adapter provides 2× magnification, which increases the apparent size of the specimen on the camera sensor for improved detail capture with Euromex microscope setups. Which microscope tube does this adapter fit? This adapter is designed for a 23.2 mm tube and will insert into standard 23.2 mm intermediate tubes used in many laboratory microscopes. Is a camera included with the adapter? No camera is included; the adapter requires a separate T2 adapter to connect an SLR or system camera to the Euromex adapter AE.5130. Which cameras are compatible with this accessory? The accessory is compatible with SLR and system cameras that can be fitted with a T2 adapter; the camera must be equipped with the appropriate T2 ring to mate with the adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
247mm 0.3x Stereo Microscope Zoom Attachment Lens 247 mm Working Distance - Euromex
Take advantage of the combination of 0.3x magnification, a 247 mm working distance and secure compatibility with articulated and double‑arm mounts for versatile sample inspection; order the SB.8903 directly via Metav Werkzeuge or consult our specialists for application advice. SB.8903 – 0.3x Attachment Lens for Zoom Stereomicroscopes (Euromex) The SB.8903 is an attachment lens for zoom stereomicroscopes, providing a 0.3x reduction and a long 247 mm working distance, intended for use on double‑arm and articulated arm stands to extend field of view and inspection clearance 0.3x auxiliary lens for zoom microscopes 247 mm working distance for larger samples Compatible with double‑arm and articulated stands Greater field of view with stable optical quality The SB.8903 functions as an auxiliary attachment lens that reduces the effective magnification to deliver a noticeably wider observable area without compromising image clarity. By lowering the magnification to 0.3x, the optical system provides a larger field of view, enabling faster inspection of larger components and assemblies. This characteristic supports efficient visual screening tasks in quality control and assembly lines where overview and positional context are as important as detail rendering. Extended working distance for safe manipulation A principal benefit of the accessory is the 247 mm working distance, which increases the gap between the objective and the specimen and thereby allows safe handling of larger parts or fixtures beneath the optics. The extended clearance reduces the risk of collisions during manual probing or tool access and is particularly advantageous when using tweezers, micro‑manipulators or illumination rigs. The design therefore supports ergonomic operation and simplifies integration into existing inspection set‑ups. Robust compatibility with articulated and double‑arm stands Designed specifically for zoom stereomicroscopes, the attachment lens is intended for use only on double‑arm and articulated arm stands to ensure mechanical stability and optimal optical alignment. The mounting constraints guarantee a secure fit and consistent working distance under dynamic repositioning. This makes the accessory well suited for laboratory benches and production cells where repeated repositioning is required and where a stable optical path is essential for repeatable inspection results. Contact Metav Werkzeuge today for tailored advice on the Euromex SB.8903 0.3x attachment lens and to arrange supply or compatibility checks directly from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SB.8903 SKU: SB.8903 Brand: Euromex Product type: Microscope attachment lens Description: 0.3x attachment lens for zoom models, 247 mm working distance Core data Magnification: 0.3x Working distance: 247 mm Compatibility and features For zoom stereomicroscopes Only for double‑arm stands and articulated arm stands Category: For stereomicroscopes Image file: SB.8903.jpg FAQ Is the attachment lens compatible with all zoom stereomicroscopes? The SB.8903 is designed for zoom stereomicroscopes but requires mounting on double‑arm or articulated arm stands; compatibility depends on the instrument’s accessory interface and stand type. What practical effect does 0.3x magnification have on inspection? A 0.3x attachment lens reduces magnification to increase the field of view and working clearance, so inspections cover larger areas more quickly while retaining sufficient detail for many visual checks. Can the SB.8903 be used on single‑arm stands or handheld rigs? No, the SB.8903 is intended only for double‑arm and articulated arm stands to maintain stable optical alignment and the specified 247 mm working distance. Will the attachment change the working distance of the microscope significantly? Yes, the SB.8903 sets the optical configuration to a 247 mm working distance, which increases clearance for larger specimens and tooling beneath the objective Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 ml Safranin Stain For Cell Nuclei And Cellulose Walls, 25 ml - Euromex
Achieve clear, reproducible contrast for cell nuclei and cellulose walls with a compact laboratory dose; combine with Astra Blue for precise two-colour preparations. Rely on consistent supply and technical guidance from Metav Werkzeuge when specifying this reagent for routine or teaching microscopy. Safranin PB.5295 — Microscope stain for cell nuclei and cellulose walls (Euromex) Safranin PB.5295 is a laboratory-grade microscope stain designed to highlight cell nuclei and cellulose walls in botanical and histological preparations. Precise staining of cell nuclei Contrasts cellulose walls effectively Compatible with Astra Blue Compact 25 ml laboratory bottle Sharper cellular contrast for dependable observation The safranin formulation provides a distinct red counterstain that binds to cell nuclei and to polysaccharide-rich cellulose walls, producing a reliable visual separation from other tissue components. When used as a counterstain, the dye enhances morphological detail under brightfield microscopes and basic imaging setups; this contrast simplifies identification of nuclear structures and cell wall boundaries, which is particularly useful for routine diagnostics, teaching slides and comparative botanical studies. The product’s purpose is clarity and repeatability rather than procedural complexity. Seamless integration into standard two‑colour staining workflows Designed for paired use with Astra Blue, the dye enables a complementary two‑colour technique: the blue tint of Astra Blue and the red tone of safranin produce high-contrast, easily interpretable preparations. This combination aids visual differentiation of lignified versus non-lignified tissues and supports faster evaluation of sample architecture. Supplied as a compact 25 ml reagent, the format is suited to laboratories and teaching environments that require controlled volumes with minimal waste, while allowing straightforward incorporation into existing staining protocols without additional specialised reagents. Practical handling, laboratory reliability and quality assurance The bottle format and composition support efficient bench work and consistent dosing in repetitive staining routines. As a microscope stain from a recognised supplier, this reagent aligns with common laboratory practices for preparation and disposal; users are advised to follow in-house safety rules and supplier instructions for handling. Sourcing via an established distributor ensures traceability and dependable logistics for ongoing laboratory needs, reducing downtime and maintaining continuity in staining supplies for educational and routine microscopy applications. For reliable two‑colour counterstaining and assured supply, order the Euromex Safranin PB.5295 through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for product availability and technical advice Technical Data Article number: PB.5295 SKU: PB.5295 Product type: Microscope stain Content: 25 ml Manufacturer: Euromex Specifications Capacity: 25 ml Special features Stains cell nuclei and cellulose walls Intended for use with Astra Blue Application: preparation (microscopy) FAQ What structures does this stain highlight most effectively? Safranin PB.5295 primarily highlights cell nuclei and cellulose walls, delivering strong red contrast that improves visibility of nuclear and cell wall detail in standard microscopy preparations. Can this stain be used together with Astra Blue? Yes. The product is intended for combined use with Astra Blue to create a two‑colour preparation in which safranin produces red contrast against the blue background, aiding tissue differentiation. Is the volume suitable for teaching and routine lab work? The 25 ml supply of Safranin PB.5295 is suitable for routine staining and teaching sessions, offering a compact quantity that limits waste while covering repeated preparations. Does Safranin PB.5295 require special equipment for observation? No specialised equipment is required; stained slides are readily examined with standard brightfield microscopes and basic imaging systems commonly found in teaching and diagnostic laboratories. How should stained waste and remnants be handled? Follow local laboratory safety procedures and institutional disposal guidelines when handling residues from Safranin PB.5295; consult the supplier’s safety information for recommended precautions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25,4mm C-Mount Adapter For Stereo Microscope Trinocular Head With 0.5x CCD Adapter - Metav IndustryLine
Benefit from precise imaging, the C‑mount standard and a 0.5× optical reduction that widens the captured field while maintaining alignment and stability; order the Adapter M503.252.1 directly via Metav Werkzeuge or ask our consultants if needed. Adapter M503.252.1 — CCD adapter for stereo microscopes, C‑mount 25.4 mm, 0.5× A Adapter M503.252.1 engineered to link a stereo microscope trinocular port to a digital camera, enabling consistent image capture and expanded field coverage for laboratory and inspection workflows. CCD adapter for digital camera integration C‑mount connection, 25.4 mm diameter 0.5× reduction for wider field of view Robust construction, precise optical alignment Faster documentation with standard camera interfaces The CCD adapter provides a straightforward mechanical and optical interface between a trinocular microscope port and a C‑mount camera, converting the microscope’s exit pupil to a camera‑friendly image circle. The integrated 0.5× reduction lowers overall magnification to increase the field of view, which speeds up specimen surveys and reduces the need for repeated repositioning. For routine imaging tasks in quality control or teaching, this configuration shortens inspection cycles and improves throughput while preserving sufficient image detail for analysis. Stable optical alignment for repeatable results Mechanical stability is critical when photographing at high magnification; the adapter is designed to maintain precise optical alignment across repeated attachments. The construction minimises mechanical play and preserves the optical axis between the microscope and the digital camera, reducing vignetting and ensuring consistent exposure framing. Such repeatability supports traceable documentation and eases comparison between successive captures, a practical advantage for assembly‑line inspection or documented research where uniform image geometry is required. Practical use in laboratory and inspection environments Integration of a dedicated camera adapter simplifies the transition from visual observation to digital imaging. The reduction optics help capture larger areas of a specimen without changing objectives, which benefits users who alternate between overview shots and detail inspection. Compatibility with common C‑mount cameras makes the adapter a flexible choice for educational labs, industrial inspection benches and R&D setups that require reliable image capture without complex custom coupling. For precise imaging solutions and to discuss compatibility with existing microscopy equipment, contact Metav Werkzeuge to arrange supply or technical consultation for the Adapter M503.252.1 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M503.252.1 GTIN: 4054469145327 ECLASS: 32130102 Tariff number: 90119090 Facts Weight: 6.15 kg Magnification: 0.5× Connection: C‑mount (25.4 mm) Type: C0.5-S-c Special features CCD adapter For attachment between stereo microscope and digital camera Compact optical reduction module Designed for stable optical alignment FAQ What cameras are compatible with this adapter? The Adapter M503.252.1 is designed for cameras with a standard C‑mount thread (25.4 mm) and will accept most industrial and scientific C‑mount CCD or CMOS cameras. Does the adapter change the microscope magnification? Yes, the built‑in 0.5× reduction decreases the effective magnification at the camera port, increasing the captured field of view for broader specimen coverage. Is this adapter suitable for routine laboratory documentation? The CCD adapter from Metav IndustryLine is intended for reliable imaging and is well suited to routine documentation tasks in laboratories and inspection environments. How does the adapter affect image alignment and vignetting? The adapter is engineered to maintain optical alignment and reduce vignetting when correctly matched to the microscope exit pupil and a C‑mount camera. What is the article number for ordering and reference? Reference Article number M503.252.1 (SKU M503.252.1) when enquiring or ordering to ensure the correct CCD adapter is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25,4mm CCD Adapter 1.5x C-Mount For Calipers - Metav IndustryLine
Take advantage of the 1.5× magnification and the standard C‑mount (25.4 mm) interface to enlarge image detail while retaining a secure mechanical fit; this adapter offers straightforward integration into inspection and imaging assemblies. Order the unit directly via Metav Werkzeuge or consult our specialists for configuration advice. DH‑C1.5 CCD Adapter — 1.5× magnification, C‑mount (25.4 mm) by Metav IndustryLine The DH‑C1.5 CCD Adapter provides a compact optical interface for connecting a CCD camera to inspection optics and measuring equipment, optimised for enhanced image scale and stable mechanical coupling. 1.5× magnification for increased image detail Standard C‑mount (25.4 mm) for universal camera fit Robust mechanical interface for reproducible positioning Compatible with measuring head MZDH0850 Greater image detail with a compact optical interface The adapter multiplies incoming image size by 1.5×, making small features easier to inspect without changing the primary objective. The listed C‑mount thread (25.4 mm) is an established camera standard, ensuring straightforward attachment to most industry CCD cameras and simplifying inventory management. By increasing the image scale at the sensor, the interface reduces the need for higher‑magnification optics elsewhere in the system, which can lower total system cost while preserving optical resolution and measurement reliability. Fast, secure installation for repeatable inspections A standardised mount means rapid mechanical coupling and consistent alignment between camera and optics. The adapter is designed to minimise axial play and wobble, supporting reproducible alignment across repeated setups and production cycles. Integration time is reduced because no bespoke fittings are required for standard C‑mount cameras, and the confirmed compatibility with the MZDH0850 measuring head makes the adapter well suited to retrofit tasks and modular inspection rigs used in routine quality control. Built for industrial imaging and metrology workflows As part of the Metav IndustryLine offering, this optical interface is intended for inspection, documentation and measurement tasks where stable imaging and predictable magnification are priorities. The compact form factor keeps optical paths short, which helps to avoid additional aberrations and simplifies focus adjustments. For production and laboratory contexts where throughput and traceability matter, the adapter supports consistent image capture and helps maintain inspection cadence with minimal adjustment between jobs. Choose the DH‑C1.5 CCD Adapter from Metav Werkzeuge for reliable magnification and plug‑and‑play integration into existing C‑mount camera systems; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering guidance. Technical data SKU: M503.251.3 Type: DH‑C1.5 Connection: C‑mount, 25.4 mm Magnification: 1.5× GTIN/EAN: 4054469145303 Customs tariff number: 90119090 eClass: 34551207 Facts Category: Optik Suitable for measuring head: MZDH0850 Story trigger: optik Manufacturer name (raw): Metav IndustryLine Special features Designed for CCD camera attachment Compact optical interface for inspection setups Standardised mechanical thread for easy replacement FAQ What cameras fit the adapter? The DH‑C1.5 adapter uses a standard C‑mount (25.4 mm) thread, so it is compatible with the majority of CCD cameras that accept C‑mount interfaces. How much does the adapter magnify the image? The unit provides a fixed 1.5× magnification, enlarging the image projected onto the camera sensor for improved detail recognition during inspection. Can this adapter be used with existing measuring heads? Yes — the adapter is specified as compatible with the MZDH0850 measuring head, enabling integration into established measurement fixtures. Will the adapter affect optical quality? The adapter is designed to preserve optical throughput and minimise additional aberrations; correct use maintains measurement fidelity while increasing image scale. What identifiers are useful for ordering or stock control? Relevant identifiers include SKU M503.251.3 and GTIN 4054469145303, which support clear order and inventory handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25,4mm C‑Mount Adapter For Stereo Microscope Trinocular To Digital Camera, CCD Adapter - Metav IndustryLine
Take advantage of a compact, C‑mount 25.4 mm interface and a purpose-built CCD adapter to integrate camera imaging into existing stereo microscope setups with minimal adjustment; order directly via Metav Werkzeuge or consult our specialists for matching camera and sensor recommendations. Adapter M503.252.2 – C‑mount CCD adapter for trinocular stereo microscopes (1× magnification) — Metav IndustryLine The Adapter M503.252.2 provides a direct connection between a trinocular stereo microscope head and a C‑mount digital camera, enabling reliable documentation and image capture for inspection, teaching and routine laboratory work. C‑mount interface, 25.4 mm 1× optical magnification CCD camera adapter for trinocular heads Rapid camera integration for routine documentation This compact imaging interface removes the need for bespoke optical assemblies by offering a standardized C‑mount connection and a true 1× magnification optical path. The result is predictable image scaling and repeatable frame sizes when coupling industrial CCD or scientific cameras to a trinocular head. As an adapter engineered for camera-based documentation, it preserves the microscope’s optical alignment and ensures that field of view and focus behaviour remain consistent with eyepiece observations, which reduces setup time and streamlines inspection workflows. The construction emphasises mechanical precision and stable seating to avoid sensor misalignment during repeated handling. Stable imaging and preserved optical performance The mechanical interface is designed to maintain parfocality and minimise tilt, which benefits tasks that require exacting comparisons or image stitching. By using a dedicated CCD adapter with a defined 25.4 mm C‑mount diameter, the optical path is kept simple and free of unnecessary glass elements that can introduce aberrations. This conserves contrast and sharpness for measurement and documentation tasks, while the solid mount reduces the risk of movement during exposure. For laboratories and production lines where consistent image quality is essential, the adapter delivers a pragmatic combination of stability and optical fidelity that supports traceable visual records. Broad compatibility and workflow advantages Compatibility with standard C‑mount cameras makes the unit suitable for many industrial and scientific imaging sensors without requiring complex optical calculations. Because the adapter maintains a 1× factor, image scale can be calculated directly from the microscope objective and the camera sensor size, simplifying calibration for measurement or metrology tasks. Integration is straightforward: the adapter mates to the trinocular port and accepts a camera with a matching thread; if larger sensors or non‑C‑mount bodies are used, simple camera‑side adaptors may be employed. This standardised approach reduces procurement complexity and supports rapid deployment across multiple microscopes or inspection stations. Contact Metav Werkzeuge for specialist advice on integrating the Metav IndustryLine Adapter M503.252.2 into existing imaging setups and for assistance with camera compatibility from our Emmerich location Technical data Article number: M503.252.2 GTIN: 4054469145334 Type: C1.0-S-C Eclass: 32130102 SKU: M503.252.2 Numbers / Key figures Weight: 6.15 kg Connection: C‑mount 25.4 mm Magnification: 1× Tariff number: 90119090 Features / Compatibility CCD adapter For trinocular stereo microscopes Compatible with C‑mount cameras Brand: Metav IndustryLine FAQ What cameras are compatible with this adapter? The adapter fits cameras with a standard C‑mount thread; most industrial CCD and CMOS cameras with a 1‑inch or smaller sensor can be used directly with the Adapter M503.252.2 from Metav IndustryLine. Does the adapter change the microscope magnification? No, the adapter provides a 1× optical path so the microscope’s native objective magnification is preserved at the camera sensor; this simplifies scale calculation for documentation and measurement. Will the adapter cause vignetting on larger sensors? Vignetting depends on the microscope objective and the camera sensor size; the Adapter M503.252.2 maintains a standard C‑mount image circle, so very large sensors may show vignetting and should be checked before deployment. Is the mechanical connection stable for repeated use? Yes, the adapter is designed for a secure, repeatable connection to the trinocular head and the camera, maintaining alignment during routine handling and reducing the need for frequent recalibration. Can this adapter be used with DSLRs or mirrorless cameras? The adapter is intended for C‑mount cameras; DSLRs and many mirrorless bodies require an additional C‑mount to camera‑mount adapter or a relay lens to match flange focal distance and sensor coverage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25.4mm CCD Adapter 0.5x C‑Mount, For CCD Camera - Metav IndustryLine
Take advantage of the compact design and precise optical scaling to integrate reliable camera coupling into inspection systems; the combination of a C‑mount, 25.4 mm thread and 0.5× magnification ensures consistent image geometry and straightforward sensor matching — order the adapter directly via Metav Werkzeuge or consult our specialists for system integration. CCD Adapter DH-C0.5 — C‑mount optical coupling, 0.5× magnification (Metav IndustryLine) A CCD Adapter for mounting C‑mount cameras to inspection optics, reducing image scale by half for improved sensor coverage in laboratory and workshop metrology. C‑mount, 25.4 mm thread 0.5× fixed magnification Designed for CCD camera integration Compact optical adapter for microscopes Improved image matching for camera-based inspection The DH‑C0.5 provides a stable and predictable optical interface so machine vision and inspection cameras achieve a consistent field of view. With a C‑mount thread sized at 25.4 mm, the adapter couples directly to standard CCD housings and many industrial lenses, while the 0.5× magnification halves the image scale to increase the covered area on a sensor without lowering resolution excessively. This reduction is beneficial where larger area capture is required for quality control or when matching a higher-resolution sensor to an existing optical path. The design reduces the need for complex lens changes and helps maintain repeatable measurement geometry across inspection runs, which supports faster setup times and fewer calibration cycles. Mechanical stability and system reliability Built for workshop and laboratory use, the optical coupling emphasises rigidity and compactness to limit misalignment and optical aberrations during handling. The adapter’s compact form reduces leverage on the camera mount, lowering the risk of vignetting or tilt that can compromise image-centred measurements. Where repeatable imaging is essential, the adapter’s fixed optical reduction gives predictable scaling, simplifying software calibration and measurement scripts. Integration into existing setups is straightforward, and compatibility with standard mounting threads reduces the requirement for bespoke brackets, helping to keep installation effort and machine downtime to a minimum. Practical benefits for metrology and inspection workflows By standardising the camera‑to‑optics interface, the adapter supports consistent image results across different cameras and lenses, which improves process control and traceability in inspection tasks. The component is particularly suited to optical inspection, documentation and simple machine‑vision tasks where stable scaling and ease of integration outweigh the need for variable optics. Compatibility notes include suitability for use with the caliper accessory MZDH0850 where mechanical integration is required. Moreover, choosing components from Metav IndustryLine aligns with a supply chain that emphasises reproducible quality and dependable European distribution, helping workshops and small manufacturers access precise tools without undue procurement complexity. Contact Metav Werkzeuge in Emmerich for integration advice and reference M503.251.1 when enquiring about the DH‑C0.5 adapter and its use in inspection systems Technical Data Article number: M503.251.1 GTIN: 4054469145280 ECLASS: 34551207 Facts Type: DH‑C0.5 Magnification: 0.5× Mount: C‑mount, 25.4 mm Tariff number: 90119090 Special features Suitable for CCD camera integration Categories: Optik Compatible with caliper MZDH0850 FAQ What cameras and lenses fit this adapter? The adapter fits cameras with a standard C‑mount and pairs with C‑mount lenses; the DH‑C0.5 was designed for CCD camera integration and connects via a 25.4 mm thread. How does the 0.5× magnification affect measurement imaging? Halving the image scale increases the observable field per frame, which helps cover larger components while retaining sensor resolution; the fixed reduction simplifies calibration for reproducible measurements. Is the adapter compatible with microscopes and inspection stands? Yes — the compact construction allows use on microscopes and similar inspection optics where a reduction coupling is required to match camera sensor size to the optical image. Which product reference should be quoted for ordering or technical enquiries? Please refer to SKU M503.251.1 (DH‑C0.5) when contacting Metav Werkzeuge for compatibility details or system integration advice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25ml Aniline Blue Third Dye For Azo Staining, - Euromex
Take advantage of a dedicated third-colour option for Azo staining, supplied in a convenient 25 ml bottle and produced by Euromex for consistent laboratory results; the combination of targeted colour contrast and reliable batch quality supports dependable routine staining. Order the Aniline Blue PB.5300 directly via Metav Werkzeuge or consult the technical advisers for protocol compatibility. Aniline Blue as third colour for Azo staining PB.5300 — Microscope stain, Euromex A reliable laboratory reagent: Aniline Blue as third colour for Azo staining PB.5300 designed for histological and cytological staining workflows Third colour for Azo staining Compatible with standard staining protocols 25 ml bottle for routine laboratory use Euromex quality control Consistent contrast for routine Azo workflows The Azo staining series gains enhanced differentiation with the addition of Aniline Blue, which provides a distinct contrast as a third dye. Supplied in a 25 ml format, the reagent is intended for repeated use in standard histology preparations and established Azo protocols. The formulation is designed to deliver reproducible staining across batches, reducing variability between runs and supporting reliable microscopic evaluation. By clarifying the role of this dye within the staining sequence, laboratories benefit from improved tissue distinction and simplified colour interpretation during microscopic analysis. Practical integration with existing staining protocols Formulated for compatibility with common laboratory workflows, the dye integrates into standard Azo procedures without the need for specialised equipment. The product is suitable for use alongside routine fixatives and mounting media, enabling straightforward implementation into current processes. The technical composition supports predictable uptake and washout behaviour, which simplifies process validation and documentation. Laboratories seeking efficient throughput will value the reagent’s balance of ease of use and dependable performance, helping to maintain consistent slide quality across repeated preparations. Quality assurance and traceability for laboratory environments Produced under Euromex quality standards, the reagent comes with clear batch identification for traceability and record-keeping. The combination of controlled production and compact packaging makes the dye suitable for both bench-top laboratories and teaching facilities that require dependable consumables. The presence of a third, complementary dye in the Azo series can improve diagnostic clarity and teaching demonstrations alike, contributing to more effective interpretation under the microscope and a reduced need for repeat staining. Contact Metav Werkzeuge today to order the Aniline Blue PB.5300 or to discuss protocol compatibility and delivery from Emmerich Technical Data Article number: PB.5300 SKU: PB.5300 Brand: Euromex Product type: Microscope stain Content: 25 ml Facts Intended use: Azo staining (third dye) Packaging: 25 ml bottle Lab application: Histology, cytology Special features Distinct third-colour contrast Batch identification for traceability Suitable for standard staining protocols FAQ What is the primary application of this dye? The dye is intended as a third colour for Azo staining and supports improved contrast in histological and cytological preparations when used according to standard protocols. Is the reagent ready to use or does it require dilution? The reagent is supplied for routine laboratory use; specific dilution requirements depend on the adopted Azo protocol and should be validated during method setup. Can the dye be used with other staining sequences? Yes, the formulation is compatible with many established workflows; however, integration into non-Azo sequences should be confirmed through trial staining and documentation. How is batch traceability handled for this product? Each batch is produced under Euromex quality control and is identifiable via the article number PB.5300 for documentation and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com