Benefit from a compact inspection optic that pairs 10x magnification with a 22 mm wide field of view and an integrated reticle for clear, repeatable measurements; the eyepiece’s 30 mm barrel diameter simplifies integration into standard microscope tubes. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Euromex EWF 10x/22 mm Eyepiece IS.6210-C — 30 mm Barrel, Integrated Reticle The EWF 10x/22 mm eyepiece IS.6210-C is a wide-field microscope eyepiece with an integrated crosshair, designed for measuring and alignment tasks in inspection and laboratory workflows. Wide 22 mm field of view 10x magnification for consistent detail Integrated reticle for precise alignment 30 mm barrel diameter for standard tubes Improved measurement clarity with a wide field The eyepiece’s 10x magnification combined with a 22 mm field of view offers a balance between magnification and situational awareness, enabling users to see larger sample areas without frequent repositioning. This reduces inspection time and supports repeatable visual checks in quality control processes. The crosshair reticle provides a defined reference for measurements and alignment, which is especially useful when documenting positions or comparing features across parts. Seamless integration into existing inspection set-ups With a 30 mm barrel diameter, the optic fits common stereo and inspection microscope tubes, enabling straightforward replacement or upgrade without mechanical modification. The design suits measurement-oriented accessories and is categorised for measuring eyepieces, allowing simple incorporation into metrological routines. The eyepiece’s format supports calibrated imaging chains when paired with appropriate objective lenses and camera adapters, facilitating traceable documentation of findings. Practical advantages for busy workshops and labs Engineered for routine use, the eyepiece supports faster decision-making at the bench by making alignment and basic measurement tasks more efficient. The visible crosshair aids repeatable positioning during comparative inspection or when aligning tools and fixtures, helping to reduce rework. Where documentation and traceability are required, the reticle assists in capturing consistent visual references that complement numerical measurement systems. For precision inspection tasks, request supply and application advice from Metav Werkzeuge GmbH in Emmerich — our consultants will recommend the right eyepiece configuration for the specific measurement workflow. Technical Data Article number: IS.6210-C SKU: IS.6210-C Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10x Field of view: 22 mm Barrel diameter: Ø 30 mm Category: Measuring eyepiece Special features EWF designation (extra wide field) Integrated reticle (crosshair) Suitable for measurement and alignment tasks Image: IS.6210-C.jpg — https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1e/a5/f1/6a/6af1a51ed8ecf2f60acae0e0/IS.6210-C.jpg FAQ Is the eyepiece suitable for routine dimensional checks? The Euromex EWF 10x/22 mm eyepiece IS.6210-C is intended for visual measurement and alignment tasks and supports routine checks where a reticle-based reference is appropriate. Can the eyepiece be used with standard stereo microscopes? Yes, the Ø 30 mm barrel diameter makes the eyepiece compatible with many standard inspection and stereo microscope tubes that accept 30 mm eyepiece barrels. How does the reticle help with documentation? The integrated crosshair in the IS.6210-C provides a repeatable reference point that simplifies photographic documentation and comparative visual records during inspections. Does the wide field improve inspection throughput? A broader 22 mm field of view reduces the need for frequent sample movement, helping to speed up routine inspections while maintaining sufficient detail at 10x magnification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, repeatable measurement in a compact eyepiece: 10x magnification combined with a 22 mm field of view provides clear observation and reliable scale reading. Order directly via Metav Werkzeuge or contact our consultants for application advice. EWF 10x/22 mm Eyepiece IS.6210-CM by Euromex — 10x magnification, 22 mm field of view EWF 10x/22 mm Eyepiece IS.6210-CM is a wide-field microscope eyepiece with an integrated 10/100 micrometer scale and crosshair, designed for precision measurement on instruments with a 30 mm tube Wide 22 mm field of view Integrated 10/100 micrometer scale Crosshair reticle for alignment Fits Ø 30 mm tube Measure with confidence: accurate scale for repeatable results The eyepiece includes a 10/100 micrometer scale combined with a crosshair reticle, enabling quantified observations without additional accessories. The built-in scale allows simple comparison of features directly in the ocular image; each division is suitable for coarse and fine reading during inspection. This arrangement reduces setup time and supports a controlled measurement workflow, which is particularly useful in production checks and quality assurance where traceable, repeatable readings are required. Comfortable observation and wide image field for faster inspections A 22 mm field of view gives a broader image area than standard oculars, so operators can view more of the specimen at once and locate features faster. The 10x magnification balances detail and context: it magnifies without overly restricting the visible area, helping to maintain orientation while measuring. Wider fields can reduce operator fatigue and speed up routine inspections, especially in tasks where rapid comparison between features is necessary. Compatibility and straightforward integration with existing microscopes Designed for a 30 mm tube, this ocular integrates cleanly into common microscope stands and inspection systems used in workshops and laboratories. The wide-field design is compatible with many standard microscope heads; when fitted, the measurement scale becomes immediately available in the optical path, avoiding the need for digital overlays or external scale slides. This simplicity translates into faster commissioning and fewer adjustments during shift changes. Practical handling and application guidance The eyepiece's construction focuses on functional reliability for everyday use: a robust mounting diameter and clear reticle markings support long-term operational use in production and educational environments. For tasks requiring comparative measurement or quick calibration checks, the ocular is a compact solution that reduces accessory complexity. If indications about specific system compatibility are needed, technical advice is available to ensure the ocular suits the intended microscope configuration. Contact Metav Werkzeuge for tailored technical advice and to confirm compatibility of the Euromex EWF 10x/22 mm eyepiece IS.6210-CM with current inspection equipment Technical data Article number: IS.6210-CM Product type: Microscope eyepiece Brand: Euromex Name: EWF 10x/22 mm Eyepiece IS.6210-CM Facts Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Micrometer: 10/100 micrometer scale Special features Wide-field (EWF) design Crosshair reticle Integrated measurement scale Compatible with 30 mm tube systems FAQ What magnification does this eyepiece provide? The eyepiece offers 10x magnification, which balances detail and context for inspection tasks with moderate enlargement needs. Does the ocular include a measurement scale? Yes, the Euromex EWF 10x/22 mm eyepiece IS.6210-CM features an integrated 10/100 micrometer scale combined with a crosshair reticle for direct visual measurement. Which microscopes will this eyepiece fit? The ocular is designed for microscopes with a 30 mm tube diameter; compatibility with specific stands depends on the instrument tube standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precise visual measurement with a 10x view and a clear 22 mm field of view supports consistent inspection results; the integrated reticle enables direct scaling within the eyepiece. Order the HWF 10x/22 mm eyepiece NZ.6010-C directly via Metav Werkzeuge or ask our consultants if needed. HWF 10x/22 mm Eyepiece with Reticle NZ.6010-C — 10x Magnification, 22 mm Field HWF 10x/22 mm eyepiece NZ.6010-C is a precision microscope eyepiece with an integrated reticle designed for measurement and inspection tasks in metrology-focused workshops. 10x high-contrast magnification 22 mm wide field of view Integrated reticle for precise measurements Designed for measurement eyepieces Measure with confidence using a built-in scale The 10x ocular delivers magnification appropriate for routine metrology and quality-control tasks while the reticle supplies a fixed reference for direct comparison and scaling. In practical terms, marks on the reticle are used to estimate dimensions or to align features without additional hardware; this reduces handling steps and potential sources of error. The construction is intended for precision visual checks rather than substitution of calibrated stage micrometers, and the integrated scale is suited to comparative measurement workflows commonly found in inspection benches. See more at once for faster inspection cycles A 22 mm field of view offers a noticeably wide field for an eyepiece in this class, decreasing the need for frequent stage repositioning and increasing throughput during repetitive checks. This broader visual span speeds up inspection tasks by keeping more of the specimen in view, which is particularly advantageous when locating features or scanning patterned surfaces. The result is improved operational efficiency: fewer adjustments, steadier observation and a smoother workflow on the shop floor. Integrates smoothly into metrology and inspection setups As a microscope eyepiece crafted for measurement purposes, compatibility with existing measurement microscopes and camera adapters is straightforward; the ocular is classified among measurement eyepieces and is commonly used in dedicated inspection systems. The brand Euromex supplies a product that focuses on robust optical performance and practical usability, making it appropriate for laboratories and workshop environments where reliable visual metrology is required. The eyepiece balances optical clarity and functional measurement aids to support consistent results over repeated use. For precise visual metrology choose the Euromex HWF 10x/22 mm eyepiece—contact Metav Werkzeuge for procurement and specialist advice direct from Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: NZ.6010-C SKU: NZ.6010-C Product type: microscope eyepiece Manufacturer: Euromex Facts Magnification: 10x Field of view: 22 mm Special features Integrated reticle Product label: HWF 10x/22 mm eyepiece with reticle NZ.6010-C Category path: Messokulare / Microscopy accessories / Measurement eyepieces FAQ What magnification does the eyepiece provide? The eyepiece is specified at 10x magnification and is intended for visual inspection and comparative measurement tasks using its integrated reticle. Can the reticle be used for simple dimensional checks? Yes, the integrated reticle in the HWF 10x/22 mm eyepiece NZ.6010-C is designed for direct comparative measurements and alignment during inspection. Is this eyepiece suitable for measurement microscopes? This microscope eyepiece is classified as a measurement eyepiece and is compatible with standard inspection setups that accept measurement-grade oculars. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 10x magnification, a 22 mm wide field of view and the integrated 10/100 micrometre scale with a central crosshair, this eyepiece supports precise in-situ measurement and repeatable alignment for inspection and quality-control workflows. Order the eyepiece directly via Metav Werkzeuge or ask their consultants for compatibility and delivery information. HWF 10x/22 mm eyepiece with 10/100 micrometre scale and crosshair (NZ.6010-CM) — Euromex microscope eyepiece An HWF 10x/22 mm eyepiece (NZ.6010-CM) is designed for accurate measurement and alignment tasks in microscopy and routine inspection environments 10x magnification for clear detail 22 mm wide field of view for broader observation Integrated 10/100 micrometre scale for direct readings Central crosshair for precise alignment Precise measurement without additional equipment The HWF 10x/22 mm eyepiece brings a practical measurement capability directly into the optical path. The 10/100 micrometre scale is graduated to enable quick visual quantification of features, reducing the need to interrupt inspection for external measuring tools. With 10x magnification and a 22 mm field of view, the reticle and crosshair remain legible while preserving context, which accelerates decision-making in production control and repeated inspections. The combination of reticle graduations and a wide field supports consistent repeatability of results across multiple operators. Comfortable viewing that speeds inspection A wide field eyepiece such as this balances magnification and context: the 22 mm field of view allows larger areas to be assessed at once while the central crosshair maintains alignment reference. Ergonomic observation reduces operator fatigue during longer sessions and helps sustain throughput on inspection benches. The product is suitable for microscope-based visual measurement, documentation and alignment tasks in quality assurance, component inspection and R&D settings, providing both clarity and orientation when conditions demand both speed and accuracy. Reliable integration for traceable workflows Designed by Euromex and listed as NZ.6010-CM, the eyepiece is intended to support traceable measurement steps within an inspection routine. The visible 10/100 micrometre graduations permit fast comparative checks and can be used as part of documented quality procedures. As a measurement-capable eyepiece, it reduces handling time and the potential for errors introduced by repeated part transfers. For laboratories and workshops seeking to streamline microscope-based checks, this reticle-equipped eyepiece is a practical choice that supports efficient, verifiable results. For ordering or technical advice on the Euromex HWF eyepiece, contact Metav Werkzeuge – Metav’s specialists can confirm compatibility and dispatch details: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: NZ.6010-CM Manufacturer: Euromex Manufacturer number: NZ.6010-CM Product type: microscope eyepiece Core specifications Magnification: 10x Field of view: 22 mm Micrometre scale: 10/100 Reticle: crosshair Features HWF wide-field eyepiece Integrated crosshair reticle For measurement and alignment in microscopy FAQ Is the reticle scale suitable for direct measurement on small parts? The integrated 10/100 micrometre scale in the eyepiece allows direct visual measurement of small features; the graduation supports fast comparative and routine checks when used with the specified 10x magnification. Which microscope tube sizes is the eyepiece compatible with? Compatibility depends on the microscope ocular tube diameter; the eyepiece NZ.6010-CM is a standard microscope eyepiece format and fits standard ocular tubes—confirm the tube diameter against the HWF eyepiece specification before installation. How should the micrometre scale be read for repeatable results? Readings with the 10/100 micrometre scale require stable focus and consistent magnification (10x); align the feature with the crosshair and note the graduation mark for repeatable documentation in inspection records. Can the eyepiece be used for both inspection and measurement tasks? Yes, the wide field and integrated reticle make the eyepiece suitable for inspection while providing measurement capability for quick, on-the-spot quantification in quality-control workflows. What is the recommended cleaning method for the eyepiece optics and reticle? Use a soft brush or dry optical wipe to remove loose debris, followed by lens tissue with a small amount of optical cleaning fluid if necessary; avoid abrasive materials to protect the reticle and coatings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency: the product lists "Euromex" as the manufacturer, but this brand is not included in the required manufacturer directory provided, which raises concerns about the accuracy and compliance of the information. Please supply a manufacturer from the approved list or confirm the correct manufacturer details to ensure that a compliant product description can be created and the product meets the necessary standards for inclusion in the catalogue. Accurate manufacturer information is crucial for maintaining the integrity of the directory and ensuring that all products adhere to the specified guidelines, avoiding potential issues with verification or approval processes.

Take advantage of the combination of 10× magnification, a 22 mm wide field of view and an integrated micrometer scale for reliable, repeatable measurements in inspection and calibration tasks. Order the WF 10x/22 mm Weitfeldokular mit Mikrometerskala, Ø 23,2 mm Tubus BS.6310-M directly via Metav Werkzeuge or ask our consultants if needed. WF 10x/22 mm Eyepiece with Micrometer Scale (BS.6310-M) — Wide-field 10×, 22 mm FOV, Euromex A WF 10x/22 mm eyepiece with micrometer scale designed for precise measurement and visual inspection in laboratory and quality-control microscopy. Wide-field 22 mm field of view Integrated micrometer scale for measurements 10× magnification for detailed inspection Accurate measurement where it matters The ocular provides 10× magnification combined with a micrometer scale, enabling direct measurement at the eyepiece without additional imaging hardware. This configuration supports efficient verification of small dimensions and allows technicians to read linear values directly through the eyepiece, simplifying the measurement workflow. The 22 mm field of view increases the visible sample area, reducing the need for frequent stage adjustments and speeding up routine checks. Comfortable observation and secure fitting Designed for standard instrumentation, the eyepiece fits a 23.2 mm tube and is optimised for prolonged use where operator comfort and repeatability are essential. The wide-field design produces a visually generous, distortion-minimised image that reduces eye strain during extended inspection sessions. Clear reticle markings within the micrometer scale enable fast interpretation of measurement ticks, improving throughput in production-control environments. Practical benefits for labs and inspection bays Using an eyepiece that integrates measurement capability reduces handling time and potential transfer errors between measuring devices. The combination of precision optics and an eyepiece-scale approach supports reproducible results for calibration routines and comparative measurements. For microscopy-based quality assurance, the ocular offers a compact solution that keeps instrumentation simple while maintaining documented measurement steps for traceability. Metav as a reliable partner in precision Metav combines decades of expertise with comprehensive supply for industry and workshops, offering a practical route to acquisition and technical advice. With a broad product range and a focus on reliability, Metav supports straightforward procurement and dependable delivery from Emmerich. If additional technical details are required or there is uncertainty about compatibility with existing equipment, the team can provide clarification and guidance by email or phone. For precise measurement tasks using the Euromex WF 10x/22 mm eyepiece (BS.6310-M), contact Metav Werkzeuge GmbH in Emmerich for purchasing advice and compatibility checks — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: BS.6310-M SKU: BS.6310-M Manufacturer: Euromex Product type: microscope eyepiece Numbers / Data Magnification: 10× Field of view: 22 mm Tube diameter: Ø 23.2 mm Special features / Versions Wide-field (WF) eyepiece Integrated micrometer scale Measurement eyepiece (Messokular) FAQ What magnification does the eyepiece provide? The Euromex WF 10x/22 mm eyepiece (BS.6310-M) offers 10× magnification, suitable for detailed visual inspection and eyepiece-level measurement. Can this eyepiece be used for precise linear measurements? Yes. The integrated micrometer scale within the eyepiece enables direct linear readings for routine measurement and calibration tasks. Which tube size is required for fitting the eyepiece? This ocular is designed for a 23.2 mm tube diameter and is compatible with microscopes accepting that standard tube size. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from 10x magnification combined with a 23 mm field of view and an integrated reticle for precise visual measurement; order the HWF 10x/23 mm eyepiece directly via Metav Werkzeuge or ask our consultants if needed. HWF 10x/23 mm eyepiece with reticle for Nexius Zoom EVO NZ.6210-C — Euromex measurement eyepiece with 10x magnification and 23 mm field of view The HWF 10x/23 mm eyepiece with reticle for Nexius Zoom EVO NZ.6210-C is a measurement-focused ocular designed to convert the Nexius Zoom EVO into a calibrated inspection system for repeatable dimensional checks and alignment tasks. Euromex HWF eyepiece »NZ.6210-C« with reticle 10x magnification for fine inspection 23 mm field of view for clear measurement Compatible with Nexius Zoom EVO microscope Accurate measurement where repeatability matters The measurement eyepiece provides 10x magnification together with a 23 mm field of view, enabling clear observation of small features while retaining a broad image area for context. The integrated reticle supplies a fixed reference for linear comparisons and alignment checks; when used with calibrated optics it supports traceable inspection routines. For workshops and QA labs this combination reduces measurement uncertainty and streamlines visual verification steps. Optical compatibility and practical integration Designed for seamless use with the Nexius Zoom EVO, the ocular matches the optical tube and imaging geometry of the series, which preserves image sharpness across the field. The Euromex design focuses on distortion control and consistent reticle visibility, so measurement marks remain usable at varying zoom settings. Installation is straightforward and the eyepiece complements digital capture workflows when images require overlaid scales for documentation. Built for routine inspection and documentation As a measurement accessory, the eyepiece assists in both manual inspection and the preparation of images for reports. The fixed reticle simplifies comparative checks and speeds up repetitive tasks, while the 23 mm field helps operators keep critical features in view without frequent repositioning. For laboratories seeking a cost-effective way to add calibrated visual checks, this ocular supports productivity and reliability in everyday inspection work. For reliable measurement results and supply from a Europe-based partner, contact Metav Werkzeuge for advice or to request the NZ.6210-C for integration into inspection set-ups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: NZ.6210-C SKU: NZ.6210-C Manufacturer: Euromex Product type: Microscope eyepiece Core specifications Magnification: 10x Field of view: 23 mm Features and compatibility Integrated reticle for measurement and alignment Compatible with Nexius Zoom EVO microscope series Category: Measurement eyepiece for inspection and documentation FAQ Is this eyepiece compatible with all Nexius Zoom EVO models? Compatibility is intended for the Nexius Zoom EVO series; the HWF 10x/23 mm eyepiece NZ.6210-C matches the tube geometry used in the Nexius Zoom EVO range. What measurement tasks is the reticle suitable for? The built-in reticle in the NZ.6210-C is intended for quick visual comparisons, alignment tasks and simple linear scaling during inspection and documentation. Can the eyepiece be used with camera adapters for image capture? Yes, the eyepiece preserves reticle visibility when the Nexius Zoom EVO imaging path is correctly configured, supporting photographic documentation with visible scale reference. How precise are measurements made with this eyepiece? Precision depends on the overall optical calibration of the microscope system; the NZ.6210-C provides a stable reference mark, and reproducible results are achieved when combined with a calibrated zoom and imaging setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine compact 0.37x reduction optics with a Ø 23.2 mm tube fit for reliable image scaling in microscopy systems; ideal where sensor matching and accurate field‑of‑view control are required. Order the DC.1353 directly via Metav Werkzeuge or consult our specialists for integration support. DC.1353 C‑Mount camera adapter with 0.37x lens (Euromex) The DC.1353 is a C‑Mount camera adapter that couples a Ø 23.2 mm microscope tube to a 1/3” camera sensor using a 0.37x objective, designed for accurate image reduction in microscopy imaging chains 0.37x reduction optics for field control Fits Ø 23.2 mm microscope tubes Optimised for 1/3” camera sensors Standard C‑Mount interface for easy integration Consistent image scale for inspection and documentation The integrated 0.37x lens gives a predictable reduction of the microscope image, helping to match the optical image to a 1/3” sensor without cropping. This optical reduction is especially useful in metrology and quality inspection, where consistent image scale reduces measurement uncertainty and simplifies calibration. By lowering the effective magnification, the adapter enables a wider field of view while maintaining usable resolution, which can speed up visual inspection routines and reduce the need for frequent reticulation of camera settings. Straightforward integration into laboratory and production setups With its C‑Mount interface and compatibility with a Ø 23.2 mm tube, the unit is intended for rapid physical and optical coupling to common microscope stands and camera modules. The mechanical standardisation reduces setup time and avoids custom machining for camera mounting, so imaging systems can be assembled with fewer components. The adapter’s compact design allows it to sit close to the tube port, preserving working distance where space is limited and enabling simpler alignment during system build and routine checks. Practical benefits for everyday microscopy workflows Selecting an adapter that is optimised for a specific sensor size reduces post‑processing workload: less digital cropping and interpolation are required, which preserves image fidelity for documentation and analysis. The device supports repeatable imaging across batches, which is beneficial for process control and traceability in production environments. Where operators are integrating cameras into microscopes for the first time, the adapter removes much of the trial‑and‑error normally associated with matching optics and sensor formats. Robust choice for dependable imaging results The C‑Mount camera adapter is produced to interface reliably with standard microscope tubing and camera threads, contributing to repeatable focus and field alignment over multiple assembly cycles. This mechanical reliability translates into fewer interruptions in inspection workflows and a reduction in the frequency of re‑calibration. When combined with a structured procurement and supply chain, the adapter supports long‑term consistency in imaging setups. Contact Metav Werkzeuge for tailored advice on integrating the DC.1353 into existing systems or for a precise technical comparison with alternative adapters; our Emmerich team can support specification matching and delivery coordination Technical data Article number: DC.1353 Manufacturer: Euromex Product type: Microscope camera adapter Designation: C‑Mount Adapter with 0.37x lens for Ø 23.2 mm tube and 1/3” camera sensor Facts Magnification / reduction: 0.37x Tube diameter compatibility: Ø 23.2 mm Sensor compatibility: 1/3” camera sensor Mount type: C‑Mount Special features Integrated 0.37x objective Designed for microscopy imaging chains Mechanical C‑Mount interface for cameras Compact form factor for close coupling FAQ What is the optical reduction provided by this adapter? The DC.1353 provides a 0.37x optical reduction, enabling a wider field of view on a 1/3” sensor when used with standard microscope tubes. Which tube and sensor sizes is the adapter compatible with? This C‑Mount camera adapter fits a Ø 23.2 mm tube and is optimised for 1/3” camera sensors, ensuring correct imaging geometry for many laboratory cameras. Can the adapter be used with any C‑Mount camera? Yes, the adapter uses a standard C‑Mount interface and is suitable for C‑Mount cameras designed for a 1/3” sensor format, though final image circle and vignetting depend on the camera sensor and optics used. Is the DC.1353 suitable for metrology and inspection applications? The DC.1353 is intended for imaging setups where consistent field‑of‑view and repeatable scaling are required; its 0.37x reduction helps maintain measurement consistency in inspection tasks. Who manufactures the adapter and what is the SKU? The adapter is manufactured by Euromex and is listed under SKU DC.1353 as a microscope camera adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise optical adaptation and wide-field imaging provided by the 0.5x reduction lens and standard C‑Mount interface to streamline digital microscopy workflows; order the adapter directly via Metav Werkzeuge or consult the Metav team for integration advice. Euromex DC.1355 C‑Mount Adapter with 0.5x Objective for Ø 23.2 mm Tube and 1/2″ Camera Sensor The C‑Mount Adapter DC.1355 is a compact microscope camera adapter designed to couple C‑Mount cameras to microscopes with a Ø 23.2 mm tube, optimising field of view for 1/2″ sensor systems. C‑Mount interface for standard cameras 0.5x reduction lens for wider field of view Designed for Ø 23.2 mm tube and 1/2″ sensors Improved imaging throughput with standard interfaces The Euromex C‑Mount Adapter DC.1355 brings a measurable improvement to imaging throughput by combining a C‑Mount interface with a 0.5x objective. The reduction lens halves the effective magnification delivered to a 1/2″ sensor, which increases the observable area without altering the optical path inside the microscope. This compatibility with a common camera mount reduces the need for costly custom couplings and enables reliable, repeatable image capture across inspection, documentation and routine analysis tasks. More useful image area and simpler sensor matching A 0.5x reduction lens is primarily valuable where a larger field of view is required. By lowering the effective magnification, the optical image is spread more evenly across the sensor, resulting in a wider scene capture from the same microscope setup. The result is a more efficient inspection process and fewer image mosaics for overview shots. For teams integrating digital cameras into established optical rigs, this adapter simplifies sensor matching and helps achieve consistent results with 1/2″ camera sensors. Robust mechanical fit for stable imaging Mechanical compatibility is essential for reproducible results in laboratory and industrial settings. The adapter is specified for a Ø 23.2 mm tube, a common standard for many trinocular and photo ports, and employs the industry-standard C‑Mount connection for camera attachment. This combination ensures a secure fit and minimal play between microscope and camera, which supports stable focus and alignment during imaging sequences. Clear mechanical standards reduce setup time and lower the risk of image artefacts caused by misalignment. Practical advantages for labs and inspection benches Integration of a purpose-built adapter reduces setup complexity and supports faster throughput in routine workflows. The device is particularly suited to laboratories, quality control benches and teaching environments where adapting different camera types quickly is necessary. By standardising on a C‑Mount connection and a 0.5x reduction, the adapter helps maintain consistent imaging parameters across multiple stations while keeping the optical chain straightforward to service and recalibrate when required. Contact Metav Werkzeuge for tailored integration advice and to order the Euromex DC.1355 C‑Mount Adapter with 0.5x objective; phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt technical support and supply options Technical data Article number: DC.1355 Brand: Euromex SKU: DC.1355 Product type: microscope camera adapter Core specifications Magnification: 0.5x Tube diameter: Ø 23.2 mm Camera sensor: 1/2″ Special features C‑Mount interface Compatible with Ø 23.2 mm tube Suited to 1/2″ camera sensors FAQ Which camera sensor sizes is this adapter intended for? The Euromex C‑Mount Adapter DC.1355 is specified for use with 1/2″ camera sensors, ensuring optimal projection of the microscope image onto that sensor format. What does the 0.5x magnification mean for captured images? A 0.5x reduction lens halves the effective magnification at the camera, producing a wider field of view on the sensor and reducing the need for image stitching in overview documentation. Which microscope tube does the adapter fit? The adapter is designed to mount to a microscope tube with a diameter of Ø 23.2 mm, a common standard on many photo and trinocular ports. Is the C‑Mount standard used for both industrial and educational cameras? Yes, the C‑Mount interface on DC.1355 supports a wide range of cameras used in industrial inspection and educational microscopy, facilitating straightforward camera swaps. Can this adapter be used for routine quality control imaging? The Euromex DC.1355 is suitable for routine inspection and documentation where a larger field of view and reliable mechanical coupling are required; its configuration is optimised for reproducible imaging workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise 0.5x optics and a C‑mount interface for consistent image scaling in documentation and inspection workflows; the adapter supports Ø 23.2 mm tube mounts and 1/2" camera sensors for broad compatibility. Order the (Euromex C‑Mount adapter with 0.5x objective DC.1324) directly via (Metav Werkzeuge) or ask our consultants if needed. Euromex C‑Mount adapter DC.1324 – 0.5x reduction lens for Ø 23.2 mm tube and 1/2" sensors The Euromex C‑Mount adapter DC.1324 is a purpose‑built microscope camera adapter that reduces image scale by 0.5x, designed for Ø 23.2 mm tube interfaces and 1/2" camera sensors to widen the captured field without compromising alignment. 0.5x magnification for wider field of view Fits Ø 23.2 mm tube systems Compatible with 1/2" camera sensors Wider field of view while keeping measurement integrity The integrated 0.5x reduction lens enlarges the observable area on the camera sensor, enabling faster inspection and clearer documentation. Built as a C‑mount adapter, the accessory preserves the optical axis and maintains focal stability when paired with compatible microscope camera systems. For imaging tasks where a larger field is required—such as sample overviews, quality control checks or assembly inspections—the reduced magnification means fewer images are necessary to cover the same area, improving throughput without additional post‑processing. Simple integration with existing microscope and camera setups Designed for laboratories and workshop metrology, the adapter connects to Ø 23.2 mm tubes and standard C‑mount camera interfaces, so retrofitting is straightforward. The physical compatibility with 1/2" camera sensors ensures that many industrial and educational camera modules can be used without custom spacers. The result is a compact optical link that minimises mechanical adjustments and reduces setup time, supporting efficient workflows and predictable imaging results. Robust accessory for reliable visual documentation As a dedicated microscope camera adapter, the unit focuses on repeatability and mechanical fit. The C‑mount format and the reduction optics contribute to consistent image scale across sessions, which is beneficial for comparative imaging and traceable visual records. For teams standardising imaging procedures, the component reduces variability between operators and setups, supporting quality assurance processes and clearer reporting. Contact Metav Werkzeuge for precise compatibility checks and to arrange purchase of the Euromex C‑Mount adapter DC.1324; call +49 2822 7131930 or email info@metav-werkzeuge.com for expert advice and supply from Emmerich. Technical Data Article number: DC.1324 SKU: DC.1324 Manufacturer: Euromex Facts Magnification: 0.5x Tube diameter: Ø 23.2 mm Camera sensor compatibility: 1/2" Special features C‑mount adapter with 0.5x objective For Ø 23.2 mm tube systems For 1/2" camera sensors FAQ What cameras are compatible with this adapter? The Euromex C‑Mount adapter DC.1324 is compatible with cameras using a C‑mount and 1/2" sensors; selection of camera modules should follow the sensor size and pixel specifications required for the intended inspection task. Will the adapter change the working distance of the microscope objective? The reduction lens alters image scale but maintains the mechanical C‑mount interface; users should verify focus and working distance after installation of the Euromex adapter DC.1324 to ensure the optical configuration meets measurement or imaging needs. Is the adapter suitable for photographic documentation in routine inspections? Yes; the adapter is designed as a microscope camera adapter to provide a wider field of view and consistent image scaling, which is well suited to routine inspection and photographic documentation in laboratory and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise optics, broad sensor compatibility and a secure C‑Mount connection for consistent microscopy imaging; order the C‑Mount Adapter DC.1357 directly via Metav Werkzeuge or ask our consultants if needed C‑Mount Adapter with 0.75x lens DC.1357 — Euromex microscope camera adapter for Ø 23.2 mm tube C‑Mount Adapter with 0.75x lens DC.1357 is a microscope camera adapter that reduces image size by 0.75x for a 2/3" camera sensor while fitting a Ø 23.2 mm microscope tube 0.75x C‑Mount lens for 2/3" sensors Fits Ø 23.2 mm microscope tube Precision machined C‑Mount connection Maintains wide sensor coverage Seamless integration for reliable image capture The adapter provides a 0.75x reduction factor that is intended for direct coupling between microscopes and 2/3" sensors, enabling improved field of view without sacrificing essential image detail. Thanks to the C‑Mount interface, the unit is compatible with standard camera mounts commonly used in industrial and laboratory imaging. The combination of precise mechanical tolerances and optical matching ensures that mounting is secure and repeatable, so image alignment and measurement routines are preserved. This makes the adapter particularly suitable for imaging tasks where consistent framing and reproducible results are required. Optical compatibility explained and practical benefit The built‑in 0.75x lens reduces the effective magnification delivered to the sensor, which increases the visible area on 2/3" camera sensors while keeping centre resolution stable. For applications where broader visual context is more valuable than extreme magnification — such as routine inspection, documentation or medium‑resolution measurement — this optical reduction improves throughput and reduces the need for repeated repositioning. The adapter’s design accounts for the Ø 23.2 mm tube interface used on many microscope heads, so optical coverage is optimised across the sensor plane and vignetting is minimised when mounted correctly. Durable connection and workshop advantages Constructed for secure attachment and consistent optical alignment, the adapter supports repetitive handling in production and lab environments. The precision fit of the C‑Mount thread and the tube interface reduces play and wobble, which contributes to stable image capture during longer inspection runs. The Euromex unit is a pragmatic choice for those wanting straightforward camera integration without complex modification to existing microscope setups. For installations that require compatibility checks or integration advice, Metav Werkzeuge acts as a quality filter and supply partner for European workshops and production sites. Arrange a technical consultation via Metav Werkzeuge for integration support or specification checks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DC.1357 SKU: DC.1357 Product type: Microscope camera adapter Brand: Euromex Core specifications Magnification: 0.75x Compatible sensor size: 2/3" Microscope tube diameter: Ø 23.2 mm Mount: C‑Mount Special features C‑Mount adapter with 0.75x lens Designed for Ø 23.2 mm tube interfaces Optimised for 2/3" camera sensors FAQ What sensor sizes are supported by this adapter? The adapter is specified for 2/3" camera sensors, with a 0.75x lens that optimises the field of view for that sensor format. Will the adapter fit standard C‑Mount cameras? Yes, the unit uses a C‑Mount connection and is intended to couple directly to standard C‑Mount camera housings. Can the adapter be used with other tube diameters? This model is designed for a Ø 23.2 mm microscope tube; compatibility with other tube diameters requires suitable intermediate sleeves or adapters. Does the optical reduction affect resolution across the image? The 0.75x reduction increases the visible area on the sensor while maintaining central resolution; peripheral coverage and vignetting depend on the specific microscope optics in use. Is this product suitable for industrial inspection workflows? Yes, the microscope camera adapter DC.1357 is built for repeatable mounting and is appropriate for inspection, documentation and similar medium‑resolution applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, true-to-scale imaging and a compact, short-tube design that simplifies camera integration. The fixed 1x focal length ensures faithful reproduction for measurement and documentation, while the robust C‑mount interface provides stable attachment for 1‑inch cameras — order directly via Metav Werkzeuge or consult our team for configuration support. Euromex C‑Mount Adapter DC.1359 — 1x fixed focal length, short tube for 23.2 mm tubus and 1‑inch cameras The Euromex C‑Mount Adapter DC.1359 is designed to connect 1‑inch cameras to a 23.2‑mm microscope tubus, offering a fixed 1x magnification and a short tube for compact imaging setups Fixed 1x magnification for true-to-scale imaging Short-tube design for compact camera integration Fits 23.2 mm microscope tube and 1-inch cameras Solid mounting via standard C‑mount thread Precise, true-to-scale imaging for measurement and documentation The adapter delivers 1x magnification, which preserves image scale and supports accurate measurement and image comparison without additional scaling factors. With a fixed focal length, optical geometry remains consistent, simplifying calibration for digital analysis and metrology tasks. This characteristic benefits laboratory documentation and quality-control routines by reducing the need for software correction and ensuring repeatable results across imaging sessions. Compact design that eases installation in constrained setups The short tube construction minimises the assembly length between camera and microscope, enabling integration where space is limited or where short optical paths reduce the risk of vignetting. The reduced back‑focal requirements help maintain illumination uniformity and make the interface suitable for compact trinocular heads and modular inspection rigs. This form factor supports efficient workstation layouts and faster setup times during inspections. Mechanical stability and standardised camera interface for reliable results A standard C‑mount thread provides secure, repeatable attachment and robust mechanical alignment for 1‑inch cameras. The adapter’s straightforward mechanical interface cuts down on play and misalignment, which is essential when capturing high-resolution images for documentation or automated image processing. The combination of stable mounting and standard interface reduces downtime and contributes to consistent imaging quality. Designed for laboratory, inspection and documentation workflows Engineered for use in educational labs, industrial inspection and routine documentation, the adapter supports common camera sizes and microscope tubus standards. The interface simplifies camera swaps and optical upgrades without bespoke machining. Where traceable imaging is required, the adapter lets technicians focus on analysis rather than custom fittings, supporting efficient workflows and dependable visual records. For advice on integrating the Euromex C‑Mount Adapter DC.1359 into existing imaging systems or to discuss camera compatibility, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised guidance and fast supply from Emmerich. Technical data Article number: DC.1359 Product type: microscope camera adapter Manufacturer: Euromex Facts Magnification: 1x Tube diameter: 23.2 mm Camera interface: 1-inch camera Special features Fixed focal length Short tube for compact integration C‑mount thread Model: DC.1359 FAQ What magnification does the adapter provide? The Euromex C‑Mount Adapter DC.1359 provides 1x magnification, delivering images at true scale for straightforward measurement and documentation. Which microscope tube and camera sizes are compatible? This adapter is compatible with a 23.2 mm microscope tubus and standard 1‑inch camera sensors when using the C‑mount interface. Does the adapter allow for focus adjustment or zoom? The adapter has a fixed focal length, so it does not provide zoom or variable focus; focus and image adjustment are handled by the microscope or camera optics. Is the adapter suitable for industrial inspection setups? Yes. The short-tube design and C‑mount compatibility make the Euromex DC.1359 appropriate for industrial inspection and routine documentation applications. Can the adapter be used with different camera brands? The adapter uses the standard C‑mount thread, allowing attachment of any camera that supports a 1‑inch sensor and C‑mount mechanical interface. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the dual imaging capability and the standard 23.2 mm tube interface to streamline documentation and observation tasks; order the DZ.9007 directly via Metav Werkzeuge or contact our consultants for technical advice. DZ.9007 Double Photo Attachment — Dual 23.2 mm Tubes for Microscope Camera Adapter (Euromex) The DZ.9007 is a microscope camera adapter designed to provide two 23.2 mm tubes for simultaneous imaging and visual inspection in laboratory and teaching environments. Dual photo ports with a 23.2 mm tube diameter Designed for microscope camera adaptation Compatible with C‑mount camera systems Model DZ.9007 by Euromex Faster documentation through simultaneous imaging The dual photo ports allow parallel use of an observation eyepiece and a camera or two imaging devices, reducing the need for repeated sample handling and re‑alignment. By keeping the optical paths stable, this configuration improves throughput for routine documentation and quality checks. The built‑in compatibility with a standard tube size means fewer adaptor parts are required, which simplifies the imaging workflow and shortens set‑up time. Simple connection to standard camera hardware The 23.2 mm tube dimension is a recognised standard for microscope photo ports and permits straightforward adaptation to common camera interfaces. With C‑mount systems widely used in microscopy imaging, integration into an existing camera setup is direct and predictable; standard adapters or holders can be employed without bespoke engineering. This predictability supports consistent image geometry and easier calibration for measurement or documentation tasks. Reliable fit for teaching and inspection benches Built as a dedicated microscope camera adapter, the device delivers a compact solution for teaching labs, routine inspections and industrial visual checks where space and repeatability matter. The clear separation of the optical channels preserves image quality and enables rapid switching between visual assessment and recorded imaging. For teams seeking a pragmatic approach to microscopy photography, the adapter reduces setup complexity while maintaining compatibility with established camera ecosystems. For precise dual‑port imaging advice and ordering, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for guidance on the Euromex DZ.9007 and compatible accessories. Technical data Article number: DZ.9007 SKU: DZ.9007 Manufacturer: Euromex Facts Tubes: two 23.2 mm Product type: Microscope camera adapter Category: C‑Mount Special features Double photo attachment Two 23.2 mm tubes for photo ports C‑mount compatibility Model designation DZ.9007 FAQ What is the main function of this adapter? The DZ.9007 is a double photo attachment that converts microscope photo ports into two 23.2 mm tubes for simultaneous observation and camera imaging. Can the adapter be used with standard industrial cameras? Yes, the design aligns with common imaging workflows and is compatible with C‑mount camera systems when used with the appropriate adapter or holder. Is the DZ.9007 suitable for teaching laboratories? This dual photo attachment is well suited to teaching and demonstration benches where simultaneous viewing and image capture speed up demonstrations and documentation. Does the adapter change the optical properties of the microscope? The adapter maintains the optical path alignment; users should ensure that camera sensors and objective magnifications are matched to preserve field of view and focus. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise GFP imaging, flexible emission options and a 23.2 mm phototube for straightforward camera integration; combine reliable optical performance with simple system compatibility. Order the filter directly via Metav Werkzeuge or ask our consultants if further clarification is required. Microscope filter DZ.9050 — Fluorescence set for blue excitation, 23.2 mm phototube The Microscope filter DZ.9050 is a fluorescence filter set designed for blue-range excitation and GFP applications, supplied with a 23.2 mm phototube adapter for direct integration into standard camera ports. Dual filter sets for GFP imaging Excitation range EX460–500 nm Includes 23.2 mm phototube adapter Bandpass and longpass emission options Optimised signal separation for reliable GFP detection The set provides EX460–500 excitation and a DM505 dichroic, combined with an EM510–560 bandpass for narrow emission capture. This arrangement improves signal-to-noise ratio by admitting the desired fluorescence while suppressing out-of-band light, which is beneficial for quantitative imaging and documentation. Explained simply, the bandpass option is ideal when spectral selectivity is required to reduce background, enabling clearer contrast in samples labelled with GFP or similar blue-excited fluorophores. Two emission strategies for adaptable workflows Delivered with both a GFP BP (bandpass) and a GFP LP (longpass) filter set, the kit supports different imaging approaches without major reconfiguration. The bandpass set captures a defined emission window for high-contrast imaging, while the longpass version allows broader emission capture when maximum signal is the priority. This flexibility reduces filter changes and workflow interruptions, so laboratories can switch between diagnostic clarity and maximum sensitivity according to the task. Easy mechanical and optical integration into existing systems Supplied for use with a 23.2 mm phototube, the set fits standard camera ports and intermediate tubes, simplifying mechanical coupling to trinocular microscopes and camera adapters. Compatibility with common phototube sizes minimises the need for additional adapters, supporting a faster setup for imaging or photodocumentation. Manufactured to professional standards, the filters offer stable spectral performance for consistent results across repeated measurements and routine laboratory use. For assistance assessing compatibility with a specific microscope or camera, and to secure the Euromex DZ.9050 through Metav Werkzeuge, please contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering options. Technical Data Article number: DZ.9050 SKU: DZ.9050 Product type: Microscope filter Brand: Euromex Core specifications Excitation: 460–500 nm Dichroic mirror: 505 nm Emission (bandpass): 510–560 nm Emission (longpass): 510 nm Phototube diameter: 23.2 mm Features Two filter sets for blue excitation (GFP BP and GFP LP) GFP BP bandpass configuration GFP LP longpass configuration Designed for fluorescence microscopy Supplied with 23.2 mm phototube adapter FAQ What excitation and emission ranges does the filter set cover? The set covers excitation EX460–500 nm, a dichroic at DM505 nm, and emission options of EM510–560 nm (bandpass) and EM510 nm (longpass) for targeted fluorescence imaging. Is this set suitable for imaging GFP-labelled samples? Yes, the Euromex microscope filter DZ.9050 (SKU DZ.9050) is specifically configured for GFP and similar blue-excited fluorophores with dedicated bandpass and longpass emission options. How is the filter set mounted in a microscope? The kit is supplied for use with a 23.2 mm phototube, allowing direct installation into standard camera tubes or intermediate phototube ports without bespoke modification. Are both filter types included in the delivery? Both the GFP bandpass and longpass filter sets are included, providing immediate flexibility for contrast-focused or high-sensitivity imaging tasks. Can the filter set be used with a camera for photodocumentation? Yes, when the microscope offers a 23.2 mm phototube or compatible camera port, the set is suitable for integration into the phototube optical path for camera-based imaging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise mechanical fit, reliable C‑Mount compatibility and straightforward integration for improved imaging workflows; order or request expert advice through Metav Werkzeuge for tailored application support. Euromex DZ.9005 — Microscope camera adapter with 23.2 mm eyepiece tube and C‑Mount compatibility Euromex DZ.9005 is a microscope camera adapter engineered to attach a C‑Mount camera via a 23.2 mm eyepiece tube, enabling consistent and repeatable digital image capture for laboratory and industrial documentation. 23.2 mm eyepiece tube fit Compatible with C‑Mount cameras Stable, secure mechanical connection Designed for laboratory microscopes Secure optical connection for reliable image capture The 23.2 mm eyepiece tube interface ensures a consistent optical path between the instrument and the camera, which reduces alignment errors and helps maintain focus across image series. By combining a defined tube diameter with C‑Mount camera compatibility, the adapter delivers precision alignment that supports reproducible imaging — critical when capturing measurement evidence or traceable inspection images. The construction is intended to minimise play and vignetting so that images remain sharp and uniform. Integrates with existing workflows to speed documentation This camera interface is designed with workflow efficiency in mind: the adapter allows cameras to be attached quickly to standard eyepiece tubes, removing the need for complex custom fittings. The result is a faster transition from observation to digital capture and more reliable digital documentation for reports, quality control or teaching. The adapter supports less interruption during routine work, helping laboratories and workshops maintain throughput while improving the availability of recorded images for analysis. What the specifications mean in plain terms A 23.2 mm eyepiece tube refers to the internal diameter of the microscope’s eyepiece holder; adapters matching this size sit directly where an eyepiece would and channel the optical image to the camera. C‑Mount describes the camera interface standard commonly used in microscopy imaging, simplifying camera selection because many machine‑vision and microscopy cameras offer this mount. Together these standards make the adapter a practical choice for a broad range of imaging setups without requiring optical reconfiguration. Support, compatibility and Metav’s supply promise Metav stands for democratisation of precision: reliable supply, broad product range and European distribution that acts as a quality filter for the market. For users uncertain about compatibility or who require additional technical details, the adapter’s straightforward specification and Metav’s advisory service remove ambiguity. Technical enquiries and order support can be addressed from Emmerich; contact options are provided below for direct assistance and clarification on integration into existing microscope systems. The Euromex unit is presented as a robust attachment for consistent camera‑to‑microscope coupling. For tailored advice on integrating the Euromex DZ.9005 with a specific microscope or camera, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for application support and supply coordination Technical data Article number: DZ.9005 SKU: DZ.9005 Brand: Euromex Type: Microscope camera adapter Image: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1e/a5/f1/6a/6af1a51ed8ecf2f60acae0ee/DZ.9005.jpg Facts Eyepiece tube diameter: 23.2 mm Special features C‑Mount compatibility Photo adapter design Category path: Mikroskopie-Zubehör > Kameras > Kamera-Adapter > C-Mount UID: DZ.9005 FAQ Is the adapter compatible with standard C‑Mount cameras? The Euromex DZ.9005 is specified for use with C‑Mount cameras and a 23.2 mm eyepiece tube, so cameras offering a C‑Mount interface are compatible. Will the adapter fit any microscope eyepiece holder? The adapter is designed for microscopes with a 23.2 mm eyepiece tube; microscopes with a different eyepiece diameter will require a matching interface or an additional adapter. Are any accessories included with the DZ.9005? No accessories are listed in the product data for the Euromex DZ.9005; any additional components or camera cables must be sourced separately. Does using the adapter affect the field of view or focus? When correctly mounted, the adapter maintains the optical path for the camera; however, sensor size and camera optics influence the final field of view and focus, so camera selection is important for the desired image coverage. Who to contact for help with mounting or compatibility questions? For application advice regarding the Euromex DZ.9005 microscope camera adapter, Metav Werkzeuge can provide technical guidance and supply support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A standard 23.2 mm tube for 31 mm photo port provides precise optical alignment and broad compatibility with Oxion upright (Revision 2) and Oxion Inverso inverted microscopes, supporting consistent image capture across systems; order the AE.5120-2 via Metav Werkzeuge or consult the Metav team for integration advice. Standard tube 23.2 mm for 31 mm photo port — Microscope camera adapter AE.5120-2 by Euromex A standard tube 23.2 mm for 31 mm photo port AE.5120-2 is designed as a camera interface for Oxion upright (Revision 2) microscopes and for Oxion Inverso inverted models, enabling straightforward attachment of imaging equipment in laboratory and industrial settings Standard 23.2 mm eyepiece tube Fits 31 mm photo port diameter Compatible with Oxion upright Rev 2 Adapter for Oxion Inverso inverted microscopes Accurate optical coupling for dependable images The 23.2 mm standard tube establishes a stable optical path between the microscope and a camera via the 31 mm photo port, reducing the need for repeated realignment. As a purpose-made microscope camera adapter, it preserves the optical axis and ensures consistent focal positioning when switching between eyepieces and imaging devices. This stability translates into fewer retakes during documentation and faster completion of imaging tasks without speculative adjustments. Designed for seamless integration with Oxion systems Compatibility with Oxion upright microscopes (Revision 2) and all Oxion Inverso inverted microscopes simplifies system planning and stock management. The adapter’s form factor matches the photo port specification precisely, which means existing camera mounts and C‑mount accessories designed around a 31 mm port can be used reliably. For laboratories that run multiple Oxion platforms, this reduces adapter variety and streamlines imaging workflows across instruments. Workflow advantages that save time By providing a standardised mechanical interface, the adapter minimises installation downtime and supports repeatable imaging procedures. The compact adapter reduces the risk of vignetting or misalignment when coupling digital sensors, which is particularly relevant for contrast techniques such as darkfield microscopy. Where documentation throughput matters, the adapter’s predictable performance contributes to smoother sample processing and more efficient capture routines. Suitable for microscopy applications requiring reproducibility In applications where consistent image quality and traceable documentation are required, the AE.5120-2 functions as a reliable accessory for both routine inspections and more demanding imaging tasks. The provision of a standard tube that conforms to established port dimensions helps maintain calibration across sessions and equipment swaps, supporting quality assurance in research, teaching and industrial inspection environments. For compatibility checks or to secure the AE.5120-2 adapter for Oxion microscopes, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order handling Technical data SKU: AE.5120-2 Manufacturer article number: AE.5120-2 Product type: Microscope camera adapter Brand: Euromex Facts Tube diameter: 23.2 mm Photo port diameter: 31 mm Special features Compatible with Oxion upright microscopes (Revision 2) Compatible with Oxion Inverso inverted microscopes Category: Darkfield microscopy accessory Image: AE.5120-2.jpg (gallery available) FAQ What does the 23.2 mm tube designation mean for image capture? The 23.2 mm figure denotes the standard eyepiece tube diameter; the AE.5120-2 adapts this standard to the 31 mm photo port, ensuring correct optical alignment for camera attachment. Will this adapter fit any Oxion model? The adapter is specified for Oxion upright microscopes (Revision 2) and for Oxion Inverso inverted microscopes; compatibility with other Oxion revisions should be verified against port dimensions. Can the AE.5120-2 be used for darkfield imaging setups? Yes, the adapter supports configurations used in darkfield microscopy by maintaining the required optical axis and connection to cameras intended for a 31 mm photo port. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 2× magnification and the adapter’s compatibility with 23.2 mm microscope tubes to improve documentation quality and streamline imaging workflows; order the adapter directly via Metav Werkzeuge or consult our advisors for integration support. Universal SLR Camera Adapter AE.5130 — 2× magnification for 23.2 mm tube (Euromex) Universal SLR Camera Adapter AE.5130 that provides 2× optical magnification for 23.2 mm microscope tubes and requires a separate T2 adapter for camera connection 2× optical magnification for enhanced imaging Fits 23.2 mm microscope tubes Compatible with SLR cameras via T2 adapter SKU AE.5130 – Euromex quality Improve image detail and speed documentation The adapter’s 2× magnification increases the effective image scale on the camera sensor, enabling high-resolution imaging of small structures without changing the microscope objective. For documentation and inspection tasks this means finer detail can be captured with the same optical setup, reducing the need for repeated re-focusing or objective swaps. The optical magnification is achieved within the adapter itself, so the microscope’s mechanical configuration remains unchanged while the recorded image benefits from greater detail and improved visual clarity. Seamless compatibility with common microscopes and cameras Designed for a 23.2 mm tube, the accessory inserts directly into the standard intermediate tube and accepts a camera connection via a T2 adapter (not included). The modular approach allows the camera to be mounted with common SLR or system camera fittings once the correct T2 ring is fitted, providing a versatile link between microscope and camera. This configuration supports routine photodocumentation in laboratories and quality-control benches where interoperability with a variety of camera bodies is required. Practical installation and workshop-ready reliability The universal adapter concept simplifies setup: the optical element is integrated so no additional relay optics are required for basic photomicrography workflows. Labelled AE.5130, the product is engineered for straightforward assembly and stable camera mounting, helping to reduce vibration and alignment issues during image acquisition. For tests and applications that require repeatable imaging, the adapter’s design supports consistent positioning and a predictable image scale, which benefits both measurement documentation and archive imaging. For precise photomicrography, obtain the Euromex AE.5130 through Metav Werkzeuge — contact the Metav Werkzeuge team in Emmerich for compatibility advice and ordering assistance Technical Data Article number: AE.5130 Manufacturer: Euromex Product type: Microscope camera adapter Data Magnification: 2× Tube diameter: 23.2 mm Camera interface: requires T2 adapter Special features Universal SLR camera adapter with 2× magnification lens Designed for 23.2 mm microscope tubes Camera adapter (T2) required, not included FAQ What magnification does the adapter provide? The adapter provides 2× magnification, which increases the apparent size of the specimen on the camera sensor for improved detail capture with Euromex microscope setups. Which microscope tube does this adapter fit? This adapter is designed for a 23.2 mm tube and will insert into standard 23.2 mm intermediate tubes used in many laboratory microscopes. Is a camera included with the adapter? No camera is included; the adapter requires a separate T2 adapter to connect an SLR or system camera to the Euromex adapter AE.5130. Which cameras are compatible with this accessory? The accessory is compatible with SLR and system cameras that can be fitted with a T2 adapter; the camera must be equipped with the appropriate T2 ring to mate with the adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Achieve clear, reproducible contrast for cell nuclei and cellulose walls with a compact laboratory dose; combine with Astra Blue for precise two-colour preparations. Rely on consistent supply and technical guidance from Metav Werkzeuge when specifying this reagent for routine or teaching microscopy. Safranin PB.5295 — Microscope stain for cell nuclei and cellulose walls (Euromex) Safranin PB.5295 is a laboratory-grade microscope stain designed to highlight cell nuclei and cellulose walls in botanical and histological preparations. Precise staining of cell nuclei Contrasts cellulose walls effectively Compatible with Astra Blue Compact 25 ml laboratory bottle Sharper cellular contrast for dependable observation The safranin formulation provides a distinct red counterstain that binds to cell nuclei and to polysaccharide-rich cellulose walls, producing a reliable visual separation from other tissue components. When used as a counterstain, the dye enhances morphological detail under brightfield microscopes and basic imaging setups; this contrast simplifies identification of nuclear structures and cell wall boundaries, which is particularly useful for routine diagnostics, teaching slides and comparative botanical studies. The product’s purpose is clarity and repeatability rather than procedural complexity. Seamless integration into standard two‑colour staining workflows Designed for paired use with Astra Blue, the dye enables a complementary two‑colour technique: the blue tint of Astra Blue and the red tone of safranin produce high-contrast, easily interpretable preparations. This combination aids visual differentiation of lignified versus non-lignified tissues and supports faster evaluation of sample architecture. Supplied as a compact 25 ml reagent, the format is suited to laboratories and teaching environments that require controlled volumes with minimal waste, while allowing straightforward incorporation into existing staining protocols without additional specialised reagents. Practical handling, laboratory reliability and quality assurance The bottle format and composition support efficient bench work and consistent dosing in repetitive staining routines. As a microscope stain from a recognised supplier, this reagent aligns with common laboratory practices for preparation and disposal; users are advised to follow in-house safety rules and supplier instructions for handling. Sourcing via an established distributor ensures traceability and dependable logistics for ongoing laboratory needs, reducing downtime and maintaining continuity in staining supplies for educational and routine microscopy applications. For reliable two‑colour counterstaining and assured supply, order the Euromex Safranin PB.5295 through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for product availability and technical advice Technical Data Article number: PB.5295 SKU: PB.5295 Product type: Microscope stain Content: 25 ml Manufacturer: Euromex Specifications Capacity: 25 ml Special features Stains cell nuclei and cellulose walls Intended for use with Astra Blue Application: preparation (microscopy) FAQ What structures does this stain highlight most effectively? Safranin PB.5295 primarily highlights cell nuclei and cellulose walls, delivering strong red contrast that improves visibility of nuclear and cell wall detail in standard microscopy preparations. Can this stain be used together with Astra Blue? Yes. The product is intended for combined use with Astra Blue to create a two‑colour preparation in which safranin produces red contrast against the blue background, aiding tissue differentiation. Is the volume suitable for teaching and routine lab work? The 25 ml supply of Safranin PB.5295 is suitable for routine staining and teaching sessions, offering a compact quantity that limits waste while covering repeated preparations. Does Safranin PB.5295 require special equipment for observation? No specialised equipment is required; stained slides are readily examined with standard brightfield microscopes and basic imaging systems commonly found in teaching and diagnostic laboratories. How should stained waste and remnants be handled? Follow local laboratory safety procedures and institutional disposal guidelines when handling residues from Safranin PB.5295; consult the supplier’s safety information for recommended precautions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a dedicated third-colour option for Azo staining, supplied in a convenient 25 ml bottle and produced by Euromex for consistent laboratory results; the combination of targeted colour contrast and reliable batch quality supports dependable routine staining. Order the Aniline Blue PB.5300 directly via Metav Werkzeuge or consult the technical advisers for protocol compatibility. Aniline Blue as third colour for Azo staining PB.5300 — Microscope stain, Euromex A reliable laboratory reagent: Aniline Blue as third colour for Azo staining PB.5300 designed for histological and cytological staining workflows Third colour for Azo staining Compatible with standard staining protocols 25 ml bottle for routine laboratory use Euromex quality control Consistent contrast for routine Azo workflows The Azo staining series gains enhanced differentiation with the addition of Aniline Blue, which provides a distinct contrast as a third dye. Supplied in a 25 ml format, the reagent is intended for repeated use in standard histology preparations and established Azo protocols. The formulation is designed to deliver reproducible staining across batches, reducing variability between runs and supporting reliable microscopic evaluation. By clarifying the role of this dye within the staining sequence, laboratories benefit from improved tissue distinction and simplified colour interpretation during microscopic analysis. Practical integration with existing staining protocols Formulated for compatibility with common laboratory workflows, the dye integrates into standard Azo procedures without the need for specialised equipment. The product is suitable for use alongside routine fixatives and mounting media, enabling straightforward implementation into current processes. The technical composition supports predictable uptake and washout behaviour, which simplifies process validation and documentation. Laboratories seeking efficient throughput will value the reagent’s balance of ease of use and dependable performance, helping to maintain consistent slide quality across repeated preparations. Quality assurance and traceability for laboratory environments Produced under Euromex quality standards, the reagent comes with clear batch identification for traceability and record-keeping. The combination of controlled production and compact packaging makes the dye suitable for both bench-top laboratories and teaching facilities that require dependable consumables. The presence of a third, complementary dye in the Azo series can improve diagnostic clarity and teaching demonstrations alike, contributing to more effective interpretation under the microscope and a reduced need for repeat staining. Contact Metav Werkzeuge today to order the Aniline Blue PB.5300 or to discuss protocol compatibility and delivery from Emmerich Technical Data Article number: PB.5300 SKU: PB.5300 Brand: Euromex Product type: Microscope stain Content: 25 ml Facts Intended use: Azo staining (third dye) Packaging: 25 ml bottle Lab application: Histology, cytology Special features Distinct third-colour contrast Batch identification for traceability Suitable for standard staining protocols FAQ What is the primary application of this dye? The dye is intended as a third colour for Azo staining and supports improved contrast in histological and cytological preparations when used according to standard protocols. Is the reagent ready to use or does it require dilution? The reagent is supplied for routine laboratory use; specific dilution requirements depend on the adopted Azo protocol and should be validated during method setup. Can the dye be used with other staining sequences? Yes, the formulation is compatible with many established workflows; however, integration into non-Azo sequences should be confirmed through trial staining and documentation. How is batch traceability handled for this product? Each batch is produced under Euromex quality control and is identifiable via the article number PB.5300 for documentation and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, laboratory-grade dye that enhances contrast in botanical preparations and integrates smoothly into established staining workflows; order the Euromex product directly via Metav Werkzeuge or consult the Metav team for application advice. Astrablue for plant cells PB.5289 — Euromex microscope stain, 25 ml vial The Astrablue for plant cells PB.5289 is a microscope stain formulated to emphasise plant cell structures and intended for combined use with safranin in routine botanical preparations. Euromex microscope stain for plant cells Ready-to-use 25 ml vial Developed for combination with safranin SKU PB.5289 for clear identification Strong contrast for botanical preparations The stain provides a consistent contrast that makes delicate plant cell structures easier to distinguish under brightfield microscopy. When applied as part of a double-staining routine, the dye works in concert with safranin to separate tissue components visually; one dye highlights cellulosic elements while the other provides complementary counterstaining, improving overall specimen legibility. This approach reduces misinterpretation and speeds up routine analysis in classrooms and basic laboratory workflows. Compact packaging geared to routine use Supplied in a 25 ml vial, the reagent is sized for laboratories and teaching facilities that require frequent small-batch preparations. The compact volume supports economical use and limits waste without compromising availability for recurring protocols. As an Euromex microscope stain, the product adheres to expectations for reproducible performance, allowing technicians and instructors to rely on consistent staining behaviour across multiple sessions. Integrates into standard microscopy workflows Designed as a consumable for microscopy preparation, the dye is compatible with established staining sequences and mounting media commonly used in botanical microscopy. The reagent is suitable for routine slides where enhanced visual differentiation is required; it can be incorporated into educational practicals, specimen documentation and basic research tasks. Clear labelling with PB.5289 assists inventory control and ensures traceability in supply chains that prioritise reproducibility. Contact Metav Werkzeuge to obtain Euromex Astrablue for plant cells PB.5289 and receive concise guidance on integrating the stain into existing protocols: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: PB.5289 SKU: PB.5289 Manufacturer: Euromex Content: 25 ml Product type: Microscope stain Facts Content / Capacity: 25 ml Special features For plant cells Use in combination with safranin FAQ What is this stain intended for? The Astrablue for plant cells PB.5289 is a microscope stain intended to enhance visual contrast in botanical specimens, especially when used alongside safranin. How much reagent is supplied per unit? Each bottle contains 25 ml of the Euromex microscope stain, suitable for routine slide preparations. Can this dye be used with safranin? Yes, the product is specified for use in combination with safranin to produce complementary staining effects. Which brand and SKU identify this product? The stain is supplied by Euromex and listed under SKU PB.5289 as a microscope stain for plant cell preparations. Where is this reagent typically used? The dye is suitable for laboratory and teaching environments where botanical slide contrast and reproducibility are required. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data conflict: Manufacturer "Euromex" is not listed in the provided manufacturer overview, which creates an issue as it prevents the system from being able to generate the required product description accurately; this could be due to an incomplete database, a missing entry, or an oversight in the provided information, and it is recommended to verify the manufacturer details or update the overview to ensure all relevant manufacturers are included, as this will enable the generation of a comprehensive and accurate product description without any further complications or errors arising from missing data.

Reliable overview contrast in a compact laboratory format supports steady throughput and predictable results; the 25 ml presentation and consistent formulation make inventory simple and staining reproducible. Order the stain directly via Metav Werkzeuge or consult their technical team for application advice. Eosin (yellowish) PB.5283 — 25 ml overview stain by Euromex Eosin (yellowish) PB.5283 is a microscope stain formulated for general overview staining in routine sample preparation and education settings Yellowish eosin for overview staining 25 ml laboratory bottle Suitable for routine microscopy preparations Improved sample contrast for routine workflows The product offers dependable overview staining to enhance contrast between cellular components during light microscopy. As an acidic dye, the preparation selectively imparts a pink to yellowish tint to cytoplasmic and extracellular structures, which simplifies the initial assessment of slides and accelerates decision-making in routine workflows. This clarity reduces retakes and supports faster sample throughput, a practical advantage in teaching labs and high-volume preparation rooms. Compact format for efficient stock management Supplied in a 25 ml bottle, the stain is convenient for bench-top use and regular replenishment cycles. The small format minimises storage footprint while ensuring sufficient supply for standard staining runs. Consistent formulation supports reproducible results across batches, helping to maintain quality standards without complex handling. The product is therefore suited to laboratories that value predictable performance and straightforward inventory control. Practical guidance and safe laboratory practice The stain is intended for routine microscopy preparation and must be handled according to standard laboratory safety procedures; consult the relevant safety data sheet before use. For any uncertainties regarding application or compatibility with specific staining protocols, Metav Werkzeuge’s specialists can provide technical guidance and help integrate the dye into established workflows. The combination of clear visual contrast and practical supply sizing supports both educational settings and professional labs seeking reliable consumables. For supply and technical questions about Euromex Eosin (yellowish) PB.5283, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and procurement support. Technical data Article number: PB.5283 SKU: PB.5283 Brand: Euromex Product type: Microscope stain Facts Content / Capacity: 25 ml Special features Yellowish eosin dye For overview staining Category: Preparation (microscopy consumable) FAQ What is the primary use of this stain? The Euromex Eosin (yellowish) PB.5283 is intended for overview staining to enhance contrast in routine light microscopy preparations. Is the 25 ml format suitable for teaching laboratories? Yes, the 25 ml bottle of PB.5283 provides a compact supply that suits teaching labs and smaller preparation batches without excessive storage needs. Can this eosin preparation be combined with other routine stains? PB.5283 is designed as an overview dye and can be used alongside standard contrast protocols; compatibility with specific workflows should be confirmed against the laboratory’s staining routine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precise fuchsin formulation for reliable bacilli contrast in tissue and a compact 25 ml volume that fits routine laboratory workflows; order directly via Metav Werkzeuge or consult our specialists for protocol advice. Fuchsin for staining bacilli in tissue PB.5305 — microscopy dye with clear contrast, 25 ml, Euromex Fuchsin for staining bacilli in tissue PB.5305 is a microscopy dye formulated for the selective colouring of bacilli within histological sections, suitable for integration into standard laboratory staining routines. Specific bacilli stain for tissue sections 25 ml reagent volume for routine use Compatible with standard microscopy protocols High-contrast staining for clear visualisation Reliable contrast that supports consistent evaluation The fuchsin formulation delivers a dependable staining result for bacilli embedded in tissue, producing a distinctive colour contrast that assists microscopic discrimination of target organisms from surrounding structures. As a dedicated microscopy dye, the reagent is designed for routine preparative workflows and supports reproducibility across repeated runs. The clear chromatic separation reduces interpretation time and helps technicians maintain consistent results under standard bright-field examination. Compact format for efficient laboratory operation Presented in a 25 ml volume, the reagent offers a space-saving solution for laboratories that require a reliable supply without excessive storage needs. The modest capacity aligns with periodic use in diagnostic or teaching settings, limiting reagent waste while ensuring availability for scheduled staining batches. Lab managers benefit from straightforward stock management and compatibility with common histology consumables, which streamlines procurement and reduces interruption to daily routines. Straightforward integration into established protocols The dye is intended for use within established histological procedures and is compatible with typical staining sequences employed in tissue-based microbiology. Technical staff will find the reagent straightforward to incorporate into existing protocols, enabling rapid validation and consistent outcomes. For laboratories seeking to align procurement with a trusted European channel, Metav Werkzeuge combines broad product availability with logistical reliability and a long-standing reputation for supplying precision tools and consumables. For dependable staining results with Euromex PB.5305, contact Metav Werkzeuge to arrange supply and discuss protocol compatibility—Metav Werkzeuge in Emmerich can provide technical guidance by e‑mail or phone. Technical data Article number: PB.5305 SKU: PB.5305 Brand: Euromex Product type: microscopy dye Core specifications Capacity: 25 ml Special features For staining bacilli in tissue Consumable for microscopy preparation Intended for routine laboratory application FAQ What is the primary application of this reagent? The Euromex Fuchsin for staining bacilli in tissue PB.5305 is intended to colour bacilli within histological sections to aid microscopic examination. How much reagent is supplied per unit? Each unit contains 25 ml of the microscopy dye suitable for routine staining tasks. Which protocols are this dye compatible with? The reagent integrates with standard histological and microscopy staining protocols commonly used for tissue-based bacterial visualisation. What visual effect can be expected after staining? The dye provides high-contrast colouring of bacilli against tissue background, facilitating clearer observation under bright-field microscopy. Where can more technical details be obtained? Detailed procedural guidance and additional technical specifications for Euromex PB.5305 can be requested from Metav Werkzeuge or found in product literature on the supplier’s technical pages. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Combining reliable staining performance, compact 25 ml format and clear product traceability, this Euromex reagent streamlines routine microscopy and bacteriological preparations; order the product directly via Metav Werkzeuge or ask our consultants if needed. Methylene Blue for biological and bacteriological staining PB.5297 — 25 ml microscope dye by Euromex Methylene Blue for biological and bacteriological staining PB.5297 is a microscope dye designed for visual contrast in biological and bacteriological preparations, suitable for laboratory and teaching environments Methylene blue for biological staining Suitable for bacteriological preparations Microscope dye, laboratory use 25 ml bottle, SKU PB.5297 Improved contrast for routine microscopy This reagent provides straightforward contrast enhancement for a wide range of microscopic examinations. As a microscope dye, it supports visual differentiation of cellular structures in routine preparations, helping to make otherwise faint details more apparent under transmitted light. The compact 25 ml format minimises storage footprint and suits laboratories or classrooms with modest reagent consumption. For technicians seeking consistent visualisation, the stain offers a practical, traceable option that integrates into existing sample‑preparation workflows without changing core procedures. Practical advantages during sample preparation Incorporating this methylene blue solution into standard staining protocols can reduce preparation time and simplify handling. The product is intended for biological and bacteriological staining, so it aligns with common laboratory tasks such as slide contrast staining and rapid evaluations. The clear labelling and manufacturer code allow for straightforward inventory management and batch control. Where documentation and repeatability matter, the reagent supports reproducible outcomes and easier record keeping in both educational and professional settings. Safe handling and laboratory guidance Treat the reagent as a laboratory chemical and store it according to institutional safety rules and local regulations. Appropriate containment, basic personal protective equipment and correct disposal of used solutions ensure responsible use. For method-specific recommendations—such as dilution, contact time and compatibility with staining sequences—consult institutional protocols or the supplier documentation; further technical details can be provided by the distributor or the manufacturer to match specific laboratory standards. Dependable sourcing and supply assurance Sourcing reagents from a reliable partner reduces uncertainty in everyday laboratory work. Metav combines decades of experience and a broad product range to support industry, trade and retail customers; their distribution from Emmerich ensures a consistent supply and a quality filter for the European market. For laboratories that value predictable delivery and product traceability, the combination of a recognised brand and steady logistics contributes to fewer interruptions and better planning for routine analyses. Contact Metav Werkzeuge for technical advice and to secure Euromex Methylene Blue PB.5297 for delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PB.5297 SKU: PB.5297 Content: 25 ml Product type: Microscope dye Label: Methylene blue for biological and bacteriological staining PB.5297 Facts Capacity: 25 ml Special features Intended use: biological and bacteriological staining Manufacturer: Euromex Application area: microscopy preparations FAQ What is this reagent used for? This dye is used for biological and bacteriological staining; the Euromex Methylene Blue PB.5297 is intended to provide contrast in microscopic preparations. How much product is supplied in one unit? The product is supplied as a 25 ml bottle; the capacity is 25 ml and the SKU is PB.5297. Is the solution suitable for routine laboratory microscopy? Yes, the microscope dye is formulated for routine biological and bacteriological preparations and is suitable for teaching and diagnostic workflows. Where can further technical details be obtained? Further specifications and handling recommendations are available from Metav Werkzeuge or the manufacturer; reference Euromex PB.5297 when requesting additional technical data. Can this stain be integrated into existing slide‑preparation protocols? The reagent is intended for standard staining work; laboratories typically adapt contact times and rinsing steps to their established protocols when integrating the stain. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com