Take advantage of a vivid Orange G stain that highlights elemental structures in animal tissues and comes in a compact 25 ml supply for dependable routine use; its clear specification supports reproducible preparations. Order the Orange G for elemental structures of animal tissues PB.5292 directly via Metav Werkzeuge or ask our consultants if needed. Orange G for elemental structures of animal tissues PB.5292 — Euromex microscope stain with focused tissue contrast The Orange G for elemental structures of animal tissues PB.5292 is a microscope stain designed to deliver clear orange contrast on structural components within animal tissue preparations. Vivid orange contrast for tissue elements Compact 25 ml volume for routine workflows Suitable for preparation and histological applications Precise contrast for clearer microscopic interpretation The dye provides a distinct orange contrast that emphasises elemental structures in animal tissue sections, supporting reliable visual differentiation during microscopic assessment. Emphasising structural contrast reduces ambiguity in routine preparations and aids reproducible documentation. By specifying the intended application as a stain for animal tissue elements, the formulation supports consistent sample evaluation and streamlined lab workflows. Practical format that fits laboratory routines Delivered in a 25 ml container, the product is sized for regular laboratory use where modest volumes are sufficient and storage space is limited. The small format is practical for histology benches and teaching labs, while the defined content simplifies inventory control. Clear labelling of the stain and its capacity supports traceability and stock management without unnecessary bulk. Handling and application guidance for dependable results The stain is intended for microscopic preparations of animal tissues and should be integrated into established staining protocols that specify exposure times and counterstains as required. For users with limited experience in staining terminology, the term microscope stain refers to a solution applied to sections on slides to enhance optical contrast between cellular or extracellular components during light microscopy. Professional supply and reassurance from Metav Sourcing the dye through an experienced distributor ensures consistent availability and a quality filter for the European market. Metav stands for the democratisation of precision, combining decades of expertise with a broad product range to support industry and craft. This partnership offers transparent order handling from Emmerich and a reliable supply chain for routine laboratory needs. For specialist advice on Euromex Orange G PB.5292 and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for tailored guidance and fast fulfilment. Technical Data Article number: PB.5292 Manufacturer: Euromex Content: 25 ml Product type: Microscope stain SKU: PB.5292 Data Capacity: 25 ml Special features Orange G dye for elemental structures of animal tissues Intended application: preparation / microscopy consumable Label: Orange G for elemental structures of animal tissues PB.5292 FAQ What is the primary application of this stain? The Orange G for elemental structures of animal tissues PB.5292 is formulated for colouring elemental structures in animal tissue preparations for light microscopy. How much product is supplied per unit? Each unit of Orange G PB.5292 contains 25 ml of stain. Is this suitable for routine histology work? Yes, the product is described as a microscope stain intended for preparation tasks and routine microscopy applications. Can the stain be used with other common histological dyes? This stain is compatible with established staining workflows; selection of counterstains and protocol adjustments should follow laboratory practice and validation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Enhance polarisation contrast and streamline integration with a compact Ø 25 mm slider that fits standard nosepieces; benefit from precise visualisation of birefringent structures and quick installation in teaching and routine laboratory microscopes. Order the polarisation filter directly via Metav Werkzeuge or ask our consultants if needed. BioBlue.Lab BB.9602 Polarisation filter by Euromex — Ø 25 mm slider, fits nosepiece The BioBlue.Lab BB.9602 is a polarisation filter designed to improve contrast in microscopy applications, supplied as a Ø 25 mm slider that fits standard nosepieces for easy insertion and reliable alignment. Ø 25 mm slider format Compatible with standard nosepieces Optimises polarisation contrast Sharper contrast for birefringent samples The filter provides targeted contrast improvement by selectively polarising light, which makes birefringence and internal stress patterns in crystalline or fibrous materials more visible. Where unpolarised illumination masks subtle optical anisotropy, a polarisation filter restores definition, enabling clearer distinction between features in thin sections, polymers or mineral slices. This results in faster visual assessment and fewer follow-up measurements, improving throughput in routine inspections and classroom demonstrations. The optical effect is immediate and interpretable even for operators with basic microscopy experience, reducing the need for complex image processing. Fast mounting and broad compatibility with standard setups Supplied as a slider in Ø 25 mm format, the accessory is intended for insertion into a compatible nosepiece and for use alongside a matching analyser in the optical train. The slider design enables quick swapping between contrast methods without readjusting the condenser or objective alignment, so microscope downtime is minimised. Compatibility with nosepiece-mounted slider holders ensures the component integrates with many education and life‑science microscope stands; the compact format also suits multi‑user environments where rapid changeover is required. This practical mounting concept contributes to efficient workflows and predictable results in busy laboratories. Reliable option for teaching and routine laboratory use Manufactured by Euromex, the product is conceived for repeated handling and straightforward operation, making it suitable for education, QC benches and basic research where polarisation contrast is regularly needed. The compact slider dimension supports storage and transport within a standard accessory kit, while the straightforward optical function keeps training time to a minimum. If uncertainty remains about compatibility with a specific microscope model or a particular application, technical advice and specification support are available to help select the correct contrast components for a given setup. The result is a pragmatic balance of optical benefit and operational simplicity. For tailored application advice or to secure supply of the Euromex BioBlue.Lab BB.9602 polarisation filter, contact Metav Werkzeuge for consultancy and purchase support at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: BB.9602 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Polarisation filter SKU: BB.9602 Measurements / core data Diameter: Ø 25 mm Mounting: slider format Fits: nosepiece Special features Analyser in slider Fits in nosepiece Intended for polarisation contrast Source: Education PDF S. 14–16; Life Science PDF S. 11–12 FAQ What is the main function of this polarisation filter? The BioBlue.Lab BB.9602 polarisation filter enhances contrast by polarising illumination, making birefringence and anisotropic structures easier to observe in routine microscopy. Will the filter fit my microscope? The BB.9602 is supplied as a Ø 25 mm slider and fits microscopes that accept 25 mm slider inserts in the nosepiece; compatibility should be checked against the stand's accessory holder dimensions. How is the filter installed? Installation is by insertion of the slider into the microscope's nosepiece or designated slider holder; the design allows quick changes between contrast methods without additional alignment. Which samples benefit most from polarisation with this accessory? Mineral thin sections, crystalline materials, fibrous polymers and specimens showing stress patterns typically show marked improvement in visibility when viewed with the BB.9602 polarisation filter. Can this filter be used in teaching environments? Yes, the compact slider format and straightforward optical effect make the BioBlue.Lab BB.9602 suitable for classrooms and instructional labs where rapid demonstration of polarisation phenomena is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high-precision measurement capability, a wide visual field and straightforward compatibility with standard microscope tubes for reliable inspection workflows; order the Euromex eyepiece directly via Metav Werkzeuge or consult the Metav team for application advice. Super Widefield SWF 10x/25 mm Eyepiece DX.6010-CM – Euromex microscope eyepiece with integrated micrometer A Super Widefield SWF 10x/25 mm eyepiece designed for metrology and quality-inspection tasks in laboratory and workshop microscopy, equipped with a micrometer scale and a central reticle for Ø 30 mm tubes. Widefield 10x optics, 25 mm field of view Integrated 10/100 micrometer scale, precise measurement Centre-mounted reticle for alignment and inspection Fits Ø 30 mm microscope tube Precise measurement where it matters The Super Widefield ocular provides a 10x magnification combined with a 25 mm field of view to deliver a broad, clear image ideal for dimensional inspection. The built-in 10/100 micrometer scale and reticle enable direct comparative measurements within the image, reducing the need for additional measurement stages. This combination supports faster decision-making on the shop floor and in the laboratory by making deviations visible at the ocular plane, which streamlines routine checks and reduces handling time. Compatibility and application in inspection workflows Designed for straightforward integration, the widefield eyepiece is compatible with standard Ø 30 mm tubes and suits a range of applications from incoming-part inspection to bench-top quality control and educational demonstrations. The large visual field reduces the number of positional adjustments required during inspections, which is particularly beneficial when examining components with repetitive features. Its optical design supports consistent observation across the entire field, improving the efficiency of comparative assessments and visual gauging tasks. Optical clarity and user-centred benefits Optical assembly and the calibrated scale prioritise usability: the micrometer allows repeatable reference readings while the reticle supports precise centring and alignment of features under observation. The wide apparent field lowers eye strain during extended use and helps operators maintain concentration during serial inspections. In practice, installers and laboratory technicians will find that the ocular’s measurement aids reduce set-up time and increase throughput without sacrificing accuracy. For measurement-critical microscopy choose the Euromex Super Widefield SWF eyepiece DX.6010-CM—contact Metav Werkzeuge for product availability and application guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DX.6010-CM SKU: DX.6010-CM Brand: Euromex Product type: Microscope eyepiece Facts Magnification: 10x Field of view: 25 mm Micrometer: 10/100 scale Tube diameter: Ø 30 mm Special features Super Widefield (SWF) design Integrated reticle (crosshair) Calibrated micrometer scale for direct measurement Suitable for inspection and metrology applications FAQ What level of magnification does this eyepiece provide? The Euromex Super Widefield SWF 10x/25 mm eyepiece DX.6010-CM provides a 10x magnification suitable for visual inspection and comparative measurement tasks. Can the micrometer scale be used for repeatable measurements? Yes, the integrated 10/100 micrometer on the Super Widefield eyepiece supports repeatable reference readings and facilitates comparative inspections without additional measurement accessories. Will this eyepiece fit my microscope? The eyepiece is designed to fit a Ø 30 mm microscope tube; compatibility should be confirmed against the instrument’s eyepiece tube diameter and mechanical adapter specifications. Is the reticle suitable for alignment of small features? The central reticle (crosshair) on the Super Widefield ocular is intended for precise centring and alignment during inspection and measurement procedures. For which applications is this eyepiece most suitable? Typical applications include quality control, dimensional inspection, laboratory analysis and educational demonstrations where direct visual measurement and alignment are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a lightweight, wipe-clean nylon exterior combined with internal padding to protect sensitive optics during transport; the compact 26 x 18 x 40 cm format makes storage and movement in busy labs or classrooms straightforward. Order the Euromex transport bag directly via Metav Werkzeuge or ask the Metav consultants for tailored advice. Euromex Microscope Transport Bag AE.9918 — Nylon, 26 x 18 x 40 cm Euromex Microscope Transport Bag AE.9918 provides protected, compact carrying and storage for microscopes and related accessories in educational and laboratory settings Durable nylon exterior, wipe-clean Internal padding for secure instrument fit Compact dimensions 26 x 18 x 40 cm Robust zip closure with reinforced seams Secure protection for sensitive optics on the move The Microscope Transport Bag AE.9918 combines a nylon outer with internal protective padding to reduce the risk of knocks and abrasion when moving instruments between sites. The padded interior absorbs shocks and holds the instrument stable, which significantly reduces the potential for optical misalignment and downtime. For workshops and teaching facilities where instruments are frequently transferred, the bag's protective design supports reliable instrument performance and extends service intervals. Compact design that simplifies logistics and storage Measured at 26 x 18 x 40 cm, this transport solution fits easily on work benches, in lockers or inside larger cases, aiding efficient storage in constrained spaces. The bag's compact footprint reduces handling complexity during kit assembly and transport, enabling quicker setup times for practical sessions or site work. The layout is conceived to allow a single convenient compartment for the microscope and small accessories, cutting the need for extra containers while keeping essential items together. Durable materials and straightforward maintenance Constructed from durable nylon, the bag resists wear and is simple to maintain with a wipe-clean surface that copes with routine laboratory dirt. Reinforced seams and a strong zip closure secure the contents and reduce the chance of accidental opening during movement. The material choice strikes a balance between lightweight portability and robustness, supporting frequent daily use without adding significant load to the user's kit. Practical suitability and purchasing guidance for facilities Ideal for schools, teaching laboratories and mobile technicians, this transport bag is a pragmatic accessory that supports equipment longevity and operational efficiency. The bag helps protect investment in optical instruments and simplifies logistics for shared or rotating equipment pools. If additional information is required about compatibility with a particular instrument model, Metav Werkzeuge can provide clarifying measurements and advice to ensure fit and function before procurement. For supply and advice on the Euromex Microscope Transport Bag AE.9918, contact Metav Werkzeuge for product guidance and procurement from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AE.9918 SKU: AE.9918 Product type: Microscope transport bag Manufacturer: Euromex Facts Material: Nylon External dimensions: 26 x 18 x 40 cm Source reference: Education PDF S. 9,14; Life Science PDF S. 6 Special features Padded interior for instrument protection Wipe-clean outer fabric Zipper closure with reinforced seams Designed for transport and compact storage of microscopes FAQ Is the bag suitable for standard teaching microscopes? The Euromex Microscope Transport Bag AE.9918 is designed to accommodate common teaching microscopes; the internal padding provides secure support for typical instrument sizes within the stated 26 x 18 x 40 cm envelope. Can the exterior be cleaned with standard lab disinfectants? The nylon exterior of the Euromex AE.9918 tolerates wipe-clean maintenance; standard non-abrasive cleaning agents are appropriate, but aggressive solvents should be avoided to preserve fabric finish and seams. Does the bag include compartments for accessories such as power supplies or slides? The design focuses on protected storage for the instrument and a limited number of small accessories; the internal layout keeps essential items together for convenient transport. Will the padding prevent shock damage during frequent transport? The padded interior reduces the transmission of impact to optical components, helping to maintain alignment and minimise the risk of damage from routine handling and transit. Are there alternative sizes or versions available for larger microscopes? The AE.9918 is a compact transport solution; for larger or specialised instruments, consult Metav Werkzeuge for recommendations on suitable alternatives or bespoke solutions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise 30 x 40 mm travel and a mechanical X‑Y control to speed up specimen alignment in polarised‑light work; order the accessory directly via Metav Werkzeuge or contact the consultancy team for application advice. Optional mechanical X‑Y stage 30 x 40 mm for iScope polarisation microscopes (IS.9522) by Euromex An optional mechanical X‑Y stage 30 x 40 mm for precise specimen positioning on iScope polarisation microscopesis designed to improve repeatability and workflow in polarised‑light investigations. Mechanical X‑Y travel 30 x 40 mm Designed for iScope polarisation microscopes Fine mechanical positioning control Compact footprint for crowded benches Faster, more reliable positioning for polarised‑light analysis A compact mechanical X‑Y stage with a 30 x 40 mm travel range enables measured lateral movement of specimens under the microscope, reducing time lost to re‑locating regions of interest. The mechanical control system offers fine adjustment, which is particularly helpful when comparing successive views or when rotating specimens for polarisation contrast. This benefit translates into fewer interruptions during sample examination and a smoother workflow in routine laboratory or educational settings. Simple integration with iScope polarisation microscopes The accessory is tailored for installation on the iScope series, ensuring straightforward integration into existing polarised‑light setups. Its mechanical design keeps the stage operation intuitive and maintenance minimal, while the compact size preserves valuable bench space. Because the unit is optional and modular, laboratories can upgrade an existing instrument for enhanced positional control without replacing the main microscope body. Practical benefit for testing and documentation Repeatable lateral adjustment supports comparable imaging and systematic documentation of polarised specimens, aiding quality control and research reproducibility. The stage assists in aligning samples precisely for photomicrography or measurement tasks and reduces the risk of missing critical microstructures during inspection. For users uncertain about compatibility or application suitability, Metav Werkzeuge provides further technical clarification and specifications. Contact Metav Werkzeuge for compatibility advice and to request the Euromex IS.9522 X‑Y stage for iScope polarisation microscopes Technical data Article number: IS.9522 SKU: IS.9522 Brand: Euromex Product type: Microscope stage Label: Optionaler mechanischer X‑Y‑Tisch 30 x 40 mm für Polarisationsmikroskope iScope IS.9522 Facts Travel range: 30 x 40 mm Special features Optional mechanical X‑Y stage Compatibility with iScope polarisation microscopes Mechanical positioning control for precise specimen alignment FAQ What is the lateral travel range of the stage? The lateral travel range is 30 x 40 mm, specified for the Euromex IS.9522 mechanical X‑Y stage used with iScope polarisation microscopes. Can the stage be retrofitted to an existing iScope microscope? Yes, the IS.9522 is an optional accessory explicitly intended for integration with iScope polarisation microscopes, allowing retrofitting where the instrument mount is compatible. How does the mechanical control improve imaging work? Mechanical fine adjustment on this stage enables repeatable specimen positioning, which assists in comparative imaging, photomicrography and systematic inspection using polarised light. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precise 30.5 mm → 23.2 mm conversion and secure compatibility with common stereomicroscope eyepiece and camera tubes; order the Euromex DC.1335 conversion adapter directly via Metav Werkzeuge or consult our specialists for application advice. 30.5 mm to 23.2 mm conversion adapter for stereomicroscopes – Euromex DC.1335 A 30.5 mm to 23.2 mm conversion adapter for stereomicroscopes DC.1335 that enables the use of 23.2 mm eyepieces or camera tubes with instruments fitted for a 30.5 mm mount 30.5 → 23.2 mm conversion fit Designed for stereomicroscopes Euromex model DC.1335 Precision fit that extends optical options The conversion adapter provides a direct mechanical link between a 30.5 mm eyepiece or holder and a 23.2 mm tube, reducing the need for improvised fixtures and additional parts. This precise size change preserves the optical axis and maintains optical alignment, so imaging accessories and eyepieces sit concentrically. The result is improved repeatability when switching between oculars, cameras or other inspection accessories, which supports efficient workflow in laboratories and production lines. Reliable mounting for consistent imaging results Engineered as an accessory for stereomicroscopes, the adapter ensures a stable connection that keeps components in the correct position during adjustment and measurement tasks. Consistent mechanical engagement reduces the risk of image tilt or off-axis errors; consequently, users benefit from reproducible visual inspection and digital documentation without unnecessary re‑calibration. The adapter’s straightforward role in the optical chain helps to streamline changeovers and saves valuable bench time. Practical compatibility for workshop and lab environments By converting from one common standard to another, the adapter broadens the range of compatible accessories, enabling older or specialised stereomicroscopes to accept modern 23.2 mm eyepieces and camera tubes. This compatibility is particularly useful in settings where equipment variety is high and replacement of entire systems would be impractical. The accessory represents a focused solution that supports longevity of existing instruments and improves flexibility in mixed‑equipment setups. For flexible laboratory integration, choose the Euromex DC.1335 conversion adapter and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer: Euromex Manufacturer article number: DC.1335 SKU: DC.1335 Product type: Microscope camera adapter Facts Conversion: 30.5 mm → 23.2 mm Compatibility & Features Intended use: Conversion adapter for stereomicroscopes Category: C‑Mount (microscopy accessory) FAQ What does the adapter do and which sizes does it convert? The Euromex DC.1335 conversion adapter converts a 30.5 mm mount to a 23.2 mm tube, enabling the connection of 23.2 mm eyepieces or camera tubes to instruments with a 30.5 mm holder. Is the adapter suitable for all stereomicroscopes? The adapter is designed for use with stereomicroscopes that accept a 30.5 mm eyepiece or holder and require a 23.2 mm interface; compatibility depends on the microscope’s existing mount standard. Can the Euromex DC.1335 be used with camera attachments? Yes, the adapter allows 23.2 mm camera tubes to be mounted on a 30.5 mm holder, making it suitable as a microscope camera adapter for imaging applications. Manufacturer: Euromex

Take advantage of precise phase-contrast alignment and a 30 mm tube interface for reliable optical centring; benefit from the compact integration of the Delphi‑X Observer series. Order the phase-centred alignment telescope directly via Metav Werkzeuge or consult our specialists for fitment advice. Phase-centred telescope Delphi‑X Observer DX.9148 — alignment telescope for phase contrast, 30 mm tube (Euromex) The Phase-centred telescope Delphi‑X Observer DX.9148 is an alignment instrument for phase contrast microscopy, designed to assist optical centring tasks through a standard 30 mm tube interface. Alignment telescope for phase-contrast optics 30 mm tube diameter for standard objective ports Delphi‑X Observer series, SKU DX.9148 Achieve reliable phase-contrast alignment fast The primary function of this alignment telescope is to simplify and speed up the optical centring process for phase contrast systems. By providing a clear visual reference, the instrument enables correct positioning of the phase ring relative to the condenser and objective, reducing trial-and-error adjustments. For laboratories and teaching facilities this means fewer interruptions during setup and consistent image quality across sessions. The optical aid reduces alignment time and supports reproducible imaging conditions, which is particularly valuable when multiple objectives or condensers are in use. Seamless integration with 30 mm tube fittings Designed around a 30 mm tube interface, the device fits standard microscope ports used in many phase-contrast configurations. The use of a common tube diameter ensures straightforward mechanical compatibility, allowing the telescope to be inserted without modification into compatible nosepieces or adaptor tubes. This compatibility simplifies workflows in multi-user environments and workshop settings, where rapid swapping of accessories is routine. The uniform mounting also helps preserve instrument alignment during handling and storage. Why precise centring improves diagnostic and research outcomes Correct alignment of the phase components ensures that contrast enhancement is applied where intended rather than introducing artefacts or uneven illumination. The optical centring aid assists in aligning the phase ring concentrically with the objective’s phase plate, which stabilises image contrast and enhances the visibility of transparent specimens. In practical terms, this can result in clearer observation of cellular detail, improved measurement reliability and fewer re-imaging cycles, translating into higher laboratory throughput and greater confidence in results. Designed for routine use within the Delphi‑X Observer family As part of the Delphi‑X Observer series, this alignment accessory complements existing observation equipment and supports predictable integration into established microscope setups. The association with a recognised series underlines consistent design language and accessory interchangeability. For procurement and inventory management, the clear series association and SKU DX.9148 facilitate ordering and stock control, reducing administrative overhead for procurement teams and workshop managers. Contact Metav Werkzeuge for procurement and technical consultation regarding the Euromex Delphi‑X Observer DX.9148 phase-centred alignment telescope—assistance available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9148 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Phase-centred telescope Facts Tube diameter: 30 mm Features & compatibility Application: alignment for phase contrast Tube mount: Ø 30 mm Series: Delphi‑X Observer SKU: DX.9148 FAQ What is the primary use of this alignment telescope? The alignment telescope supports optical centring for phase contrast systems; the Delphi‑X Observer DX.9148 provides a visual reference to align the phase ring with the objective. Which tube diameter does the device require? The instrument is designed for a 30 mm tube interface and is intended to be compatible with microscope fittings that accept a 30 mm tube. Is the telescope part of an accessory series? Yes, the device belongs to the Delphi‑X Observer series and is identified by SKU DX.9148 for inventory and ordering. Can the alignment telescope improve image consistency? Correct use of the alignment aid reduces misalignment-related artefacts and helps maintain consistent phase-contrast performance across sessions. Is specialised training required to use the instrument? Basic familiarity with phase contrast components is sufficient; the alignment telescope is intended to streamline the centring procedure for routine laboratory use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The phase‑centred telescope combines precise optical alignment with a standard Ø 30 mm tube, ensuring fast and reliable phase‑contrast setup; order the IS.9148 through Metav Werkzeuge or ask the consultants for compatibility details. Euromex phase‑centred telescope IS.9148 – Ø 30 mm tube for phase‑contrast systems The phase‑centred telescope IS.9148 is a compact accessory for accurately centring phase components in phase‑contrast microscopy, designed for integration with standard 30 mm tube systems. Phase alignment for phase‑contrast microscopy Ø 30 mm optical tube for standard eyepiece ports Compact design for easy integration Euromex quality and industrial reliability Faster, repeatable phase alignment for routine work The phase‑centred telescope is designed to make optical alignment straightforward and repeatable, reducing downtime during microscope setup. By centring the phase annulus relative to the objective, the accessory streamlines the adjustment process for phase‑contrast techniques, so laboratories and workshops can maintain consistent image quality without prolonged calibration. The clear, mechanical reference provided by the device supports efficient workflow and lowers the risk of misalignment during sample preparation. Compatibility and simple integration into existing systems Featuring a Ø 30 mm tube, this telescope matches common eyepiece and accessory ports, enabling seamless installation into many phase‑contrast configurations. The compact form factor permits placement without obstructing other condenser or illumination adjustments, which simplifies retrofitting on an existing bench or microscope stand. Technical compatibility is determined by tube diameter and optical path—Metav Werkzeuge can advise on fitment and any adapter options required for specific makes and models. Proven supply chain and expert support for dependable use Sourcing through an experienced partner ensures availability and after‑sales guidance: Metav Werkzeuge operates as a precision partner, offering fast, transparent order processing and a broad product range that supports long‑term procurement. With a track record of trusted supply and extensive product selection, the partnership reduces procurement complexity and safeguards workshop continuity. For technical questions or to check system compatibility, Metav’s consultants provide targeted advice based on the telescope’s function and intended application. Contact Metav Werkzeuge for compatibility advice and to secure the Euromex IS.9148 phase‑centred telescope from the Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9148 Brand: Euromex Product type: Phase‑centred telescope SKU: IS.9148 Numbers / Core technical data Tube diameter: Ø 30 mm Special features Phase‑centred design for phase‑contrast microscopy Fits 30 mm tube eyepiece ports Category: Phase contrast accessory FAQ What is the primary purpose of this accessory? The phase‑centred telescope IS.9148 is used to centre the phase annulus relative to the objective for phase‑contrast microscopy, improving image consistency. What tube size does the telescope require? The phase‑centred telescope IS.9148 is specified for a Ø 30 mm tube, matching standard 30 mm accessory ports. Will the IS.9148 fit microscopes from different manufacturers? Compatibility depends on the presence of a 30 mm tube port and the microscope’s condenser layout; the phase‑centred telescope IS.9148 typically integrates with systems designed for phase‑contrast accessories. Can the telescope be used for alignment on non‑phase contrast systems? While intended for phase‑contrast alignment, the phase‑centred telescope IS.9148 can assist in general optical centring tasks where a 30 mm tube interface and similar alignment procedure are applicable. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a straightforward optical conversion that expands camera options and preserves alignment: the adapter converts a 30 mm tube to 23.2 mm, enabling the use of standard C‑mount cameras on many stereo microscope heads and avoiding the need for costly microscope changes. Order via Metav Werkzeuge or ask the consultants for compatibility advice. Euromex DC.1330 – 30 mm to 23.2 mm conversion adapter for stereo microscopes Euromex DC.1330 is a conversion sleeve designed to adapt a 30 mm tube diameter to a 23.2 mm interface, allowing connection of C‑mount imaging devices to compatible stereo microscope heads. 30 mm to 23.2 mm conversion adapter For stereo microscopes Compatible with C‑mount cameras Euromex model DC.1330 Adapt different optical standards without replacing the microscope The 30 mm to 23.2 mm conversion provides a practical route to extend imaging capabilities without a major equipment overhaul. By matching tube diameters between an existing stereo microscope and a camera interface, the adapter maintains optical alignment and reduces the risk of vignetting that can occur with improper fittings. This solution is particularly useful for laboratories and inspection benches where flexibility is required: the conversion sleeve enables the attachment of various imaging sensors while keeping the original optical path intact. Integrate cameras quickly for consistent documentation Designed with camera integration in mind, the adapter makes it easier to use C‑mount cameras on heads that accept a 30 mm tube. The C‑mount standard is widely used in industrial and educational imaging, so the conversion ring streamlines the transition from visual inspection to digital documentation. A secure mechanical connection provides repeatable positioning of the imaging sensor, which supports consistent image framing and reliable comparison of captured images across sessions. Small addition, measurable workflow benefits As a compact accessory, the conversion adapter simplifies set-up and reduces downtime. Rather than sourcing a new microscope or a bespoke camera holder, the conversion sleeve offers a cost-effective route to expand capabilities. For workshops, teaching rooms and quality-control stations, this keeps the toolset nimble and allows teams to adapt microscopes to changing imaging tasks quickly. If further specification checks are required, technical advisors can confirm optical compatibility and camera flange distances for specific configurations. For straightforward camera integration on stereo microscopes, contact Metav Werkzeuge to request the Euromex DC.1330 conversion adapter or to receive specialist advice — Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DC.1330 SKU: DC.1330 Manufacturer: Euromex Product type: Microscope camera adapter Facts Conversion: 30 mm to 23.2 mm Application: stereo microscopes Category: C‑Mount Features Enables C‑mount camera connection Label: 30 mm to 23.2 mm conversion adapter DC.1330 Image file: DC.1330.jpg FAQ Is the adapter suitable for all stereo microscope brands? Compatibility depends on the microscope's external tube diameter and the intended camera interface; the Euromex DC.1330 converts a 30 mm tube to a 23.2 mm interface and is therefore suitable where those diameters match. Can standard C‑mount cameras be attached using this adapter? Yes, the conversion sleeve is intended to enable C‑mount camera attachment on heads with a 30 mm tube, facilitating direct connection to C‑mount imaging devices. Will the adapter affect image quality or introduce vignetting? When used in the correct optical configuration the adapter preserves alignment; however, image fall-off can occur if the camera sensor and microscope optics are mismatched — checking the optical train is recommended before extended use. Are any additional accessories included with the adapter? The product is supplied as the conversion adapter; compatibility with specific camera mounts or additional extension tubes should be checked separately. What is the manufacturer and SKU for ordering reference? The adapter is the Euromex DC.1330, SKU DC.1330, listed as a microscope camera adapter. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of wide-field optics, a clear integrated pointer and compatibility with standard 30 mm tubes for reliable inspection and measurement tasks; order the eyepiece directly via Metav Werkzeuge or ask our consultants for application support. EWF 10x/22 mm Eyepiece with Pointer IS.6210-P — Wide-field optics, Ø 30 mm tube EWF 10x/22 mm Eyepiece with Pointer IS.6210-P provides a wide visual field and an integrated pointer for straightforward marking and inspection in laboratory and quality-control settings. Wide 22 mm field of view 10x magnification for clear detail Integrated pointer for measurements Fits Ø 30 mm tube Better measurement with a larger visible area The EWF design delivers an expanded 22 mm field of view, which reduces the need for constant specimen repositioning and speeds up inspection routines. With 10x magnification, small features remain discernible while the wider field keeps more of the sample in view; this combination supports faster visual comparisons and fewer repositioning errors during routine checks. The optical layout is geared towards precision tasks where a broad overview and moderate magnification yield the best compromise between context and detail. Simple integration into existing microscopes Designed for microscopes that accept a 30 mm eyepiece tube, the ocular fits Ø 30 mm tubes without ad hoc adapters, which simplifies instrument setup and changeover. The standard tube compatibility helps maintain workflow continuity in multi-user environments and reduces downtime when swapping eyepieces for different tasks. Clear labelling of mounting dimensions and the universal fit support predictable instrument configuration in metrology and inspection stations. Pointer aids clear documentation and annotation An integrated pointer is included to mark features directly within the view field, supporting visual annotation and repeatable alignment during measurements. The presence of a pointer shortens training time for operators and clarifies communication when documenting defects or measurement positions. For inspection processes that require visual referencing—such as routine quality checks or comparative assessments—the built-in pointer provides an immediate, low-effort method of indicating points of interest. Purpose-built for inspection and teaching applications As a microscope eyepiece tailored to measurement and observation, this ocular combines a wide field format with user-friendly markers, making it suitable for routine laboratory inspection, education and quality assurance. The optical characteristics favour tasks where overview and orientation are as important as magnified detail. For workshops and small laboratories seeking dependable, easily integrated optics, the eyepiece offers a pragmatic balance of visibility and utility. For application advice or to place an order through Metav Werkzeuge — including compatibility checks for specific microscope models — please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request the IS.6210-P eyepiece. Technical data Article number: IS.6210-P SKU: IS.6210-P Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Special features EWF (extra wide field) design Integrated pointer for visual marking Suitable for inspection and teaching applications FAQ What does EWF mean and why does it matter? EWF stands for extra wide field; the EWF 10x/22 mm eyepiece increases the visible area, which facilitates faster inspections and easier orientation when measuring features. Is the eyepiece compatible with microscopes that use a 30 mm tube? Yes. The IS.6210-P eyepiece is designed to fit a Ø 30 mm tube and can be used with compatible microscope models without additional adapters. How does the integrated pointer support measurement tasks? The integrated pointer in the IS.6210-P eyepiece provides a clear reference within the field of view, enabling straightforward visual annotation and repeatable alignment during quality checks. Will the 10x magnification be sufficient for routine inspection? For many quality‑control and educational tasks, 10x magnification offers a practical balance between detail and overview; combined with the 22 mm field of view, it reduces the need for frequent sample repositioning. Can the eyepiece be used for documentation during teaching or training? Yes. The wide field and pointer make the eyepiece well suited to demonstration and training, where showing context and marking features clearly are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of precise polarisation performance, a compact 32 mm diameter and simple installation into standard filter holders provides reliable contrast enhancement for polarised-light microscopy. Order the component directly via Metav Werkzeuge or consult the sales team for compatibility checks. Polarisation filter BioBlue.Lab BB.9732 — 32 mm polarisation element by Euromex The Polarisation filter BioBlue.Lab BB.9732 is a compact polarisation element for microscopes, intended to improve contrast in polarised-light applications and to be mounted in standard filter holders. 32 mm diameter filter element Compatible with standard filter holders Enhances contrast for polarised microscopy Consistent contrast improvement for polarised microscopy The polarisation filter delivers a clear enhancement of image contrast by selectively transmitting polarised light; this effect supports colour separation and detail recognition in polarised-light techniques. Designed within the BioBlue.Lab series by Euromex, the component is specified as a 32 mm element, which allows integration into common filter carriers used in laboratory and teaching microscopes. The optical function is straightforward: by introducing a polarising element into the illumination or observation path, unwanted glare and isotropic components are reduced, so anisotropic structures become more apparent. This makes the filter valuable for routine laboratory tasks where improved material contrast aids inspection and documentation. Simple integration with existing filter systems Compatibility is a practical advantage: the element is specified to fit in a standard filter holder, permitting retrofitting without changes to the microscope’s optical train. The measured 32 mm diameter corresponds with many commercial filter wheels and slider carriers; this dimension provides a predictable mechanical fit and straightforward replacement workflows in workshop or classroom environments. Installation requires only insertion into the appropriate holder rather than optical realignment, which reduces downtime and keeps instrument maintenance minimal. The mechanical compatibility supports efficient workflows in settings where multiple contrast methods are used in short succession. Reliable optical fidelity for everyday laboratory use Optical reliability and consistent handling are core benefits for users who require repeatable results. As part of the BioBlue.Lab product line, the filter is produced to meet general laboratory expectations for microscopy accessories and to integrate with standard teaching and research microscopes. The design emphasises ease of use and predictable optical behaviour, making it suitable for quality control, materials inspection and educational polarisation demonstrations. For complex or specialised optical requirements, confirmation of holder type and mechanical clearance is recommended to ensure full compatibility with the intended microscope system. Contact Metav Werkzeuge to confirm compatibility with existing filter holders and to arrange supply of the Euromex BioBlue.Lab BB.9732 polarisation filter through Metav’s distribution network Technical Data Article number: BB.9732 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Polarisation filter Source: Education PDF-S. 16; Life Science PDF-S. 12 Facts Diameter: 32 mm Special features Fits in filter holder Polarisation element for polarised-light microscopy Label: Polarisationsfilter BioBlue.Lab BB.9732 FAQ What is the diameter of the polarisation element? The polarisation element has a diameter of 32 mm and is identified as BB.9732. Will this filter fit my microscope’s filter holder? The filter is specified to fit in a standard filter holder; the BioBlue.Lab BB.9732 element is designed for insertion into compatible filter carriers that accept 32 mm elements. Which applications are this element intended for? The component is a polarisation filter intended for use in polarised-light microscopy, supporting contrast enhancement and material inspection. How is the product identified in stock and documentation? The item is listed under SKU BB.9732 and belongs to the BioBlue.Lab series by Euromex. Is this element part of a recognised product line? Yes, the element is part of the BioBlue.Lab series and is supplied under the Euromex brand as a polarisation accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise contrast control and full 360° rotation combined with straightforward compatibility for DZ-series objectives to improve polarisation workflows and reduce rework. Order the Euromex polariser directly via Metav Werkzeuge or ask the consultants for application advice. DZ.9045 360° Rotatable Polariser for DZ-series Microscope Objectives by Euromex DZ.9045 offers a 360° rotatable polariser engineered to enhance contrast in polarisation microscopy for users of DZ-series objectives. 360° rotation for precise polarisation control Designed for DZ-series microscope objectives Enhances contrast for polarisation techniques Compact mount for simple optical integration Precise contrast control through continuous rotation A continuously adjustable 360° rotatable element enables fine-tuning of polarisation and therefore direct control of contrast in transmitted-light and reflected-light polarisation techniques. By rotating the polariser, the analyser interaction is varied incrementally, which adjusts extinction and maximises feature visibility without changing illumination or objective settings. This technical adjustability translates into measurable gains in inspection repeatability and quicker set-up times for polarisation tasks. Seamless compatibility and minimal disruption to the optical path Engineered for use with DZ-series objectives, the unit integrates into existing optical trains with minimal alignment effort. The compact design preserves the original optical path and working distance of the objective, avoiding the need for re‑calibration of focus or stage positions after installation. Compatibility with the DZ family reduces spare-part complexity and supports a streamlined inventory strategy for laboratories and workshops that use multiple DZ-series optics. Practical benefits for laboratory and inspection workflows Built to support routine polarisation workflows, the device reduces subjective interpretation by providing reproducible polarisation settings that can be recorded and replicated. For quality control and educational environments, the polariser helps to standardise imaging conditions and to accelerate decision-making. If further technical data or compatibility checks are required, Metav Werkzeuge can provide detailed assistance via email or telephone to ensure the accessory meets the intended application. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ.9045 polariser into existing microscopy setups and to request ordering information via Metav Werkzeuge GmbH, the European supply partner. Technical Data Article number: DZ.9045 SKU: DZ.9045 Product type: Microscope objective accessory Brand: Euromex Category path: Microscopy accessories / Contrast methods / Polarisation Facts Rotation: 360° rotatable Compatible with: DZ-series objectives Special features Application: Polarisation techniques 360° adjustable polariser Compact, low‑profile mount FAQ How does the 360° rotation affect image contrast? The DZ.9045 polariser adjusts the interaction between polariser and analyser across a full 360°, enabling controlled contrast changes for clearer observation of anisotropic structures. Is the polariser compatible with all DZ-series objectives? Compatibility is intended for DZ-series objectives; the DZ.9045 polariser is designed to match mechanical and optical interfaces typical of the DZ family. Can the polariser be left in place during routine objective changes? Yes, the compact design permits it to remain in the optical path during objective swaps without significant impact on working distance or alignment when used with DZ-series optics. Does the polariser require special calibration or maintenance? No specialised calibration is necessary beyond standard optical alignment; periodic cleaning of the optical surfaces is recommended to maintain optimal contrast performance. What improvements can be expected in inspection workflows? Using the DZ.9045 from Euromex typically reduces adjustment time and increases reproducibility of polarisation settings, which supports faster and more reliable inspection outcomes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Product data incomplete or inconsistent: the manufacturer "Euromex" is not listed in the approved manufacturer directory, which means that the necessary verification process cannot be completed, and as a result, it is not possible to generate the product description accurately or ensure compliance with the required standards for inclusion in the system, potentially leading to further delays or complications in processing or approving the product for distribution or sale, as the absence of the manufacturer from the directory raises questions about the authenticity, reliability, or legitimacy of the product, making it essential to address this issue promptly to avoid further disruptions.

Data error: Manufacturer "Euromex" is not listed in the approved manufacturer directory, so a compliant product description cannot be generated; this issue may arise if the manufacturer has not completed the necessary registration process or if their details have not been updated in the directory, which is essential for ensuring compliance with industry standards and regulatory requirements, and it is recommended to verify the manufacturer's status or contact the relevant authority to resolve the discrepancy and enable the creation of an accurate and compliant product description that meets all necessary guidelines and expectations.

Take advantage of the 360° rotatable polariser for precise contrast control and the straightforward compatibility with DZ-series stands to improve polarisation workflows; order directly via Metav Werkzeuge or contact our consultants for installation guidance. Polariser 360° rotatable for DZ-series stand DZ.9047 — Rotating polarisation filter by Euromex The Polariser 360° rotatable for DZ-series stand DZ.9047 is a rotating polarisation filter designed for use with DZ-series microscope stands to enable controlled contrast adjustment in polarisation-enhanced inspections. *360° rotation for full orientation control *Designed for DZ‑series microscope stands *Improves polarisation contrast and visual clarity Better contrast with controlled polarisation A precisely rotating polariser delivers repeatable, adjustable polarisation that enhances material contrast and reveals structural detail otherwise invisible under standard illumination. The supplied rotating element provides 360° rotation, enabling fine tuning of the polarisation direction to match sample requirements. This adjustment reduces glare and emphasises anisotropic features, so inspections become more reliable and measurement decisions are based on clearer visual evidence. The rotating polariser is a simple, mechanical addition that transforms illumination behaviour without altering the optical path length. Smooth integration with DZ-series stands for efficient workflows Compatibility with the DZ-series stand family ensures straightforward fitting and alignment. The rotatable unit mounts directly to the designated holder on DZ stands, maintaining the mechanical stability expected in routine microscopy tasks. Installation and rotation are mechanical, avoiding the need for electronics or recalibration of the optical train, which keeps downtime to a minimum. This arrangement supports efficient workflows and allows teams to switch between polarised and unpolarised observation quickly, preserving throughput in busy inspection or teaching environments. Practical benefits for workshop and laboratory use The compact rotating polariser is engineered for practical, day-to-day use in laboratories and workshops where repeatable viewing conditions are essential. By enabling targeted polarisation control, the accessory helps highlight strain patterns, birefringence and surface textures across a range of materials. The design supports frequent operation and straightforward handling, making it well suited for routine quality checks and comparative examinations. When integrated into standard microscope setups, the polariser helps standardise visual assessment procedures and supports clearer documentation of findings. For precise polarisation control with DZ stands, contact Metav Werkzeuge to arrange supply or technical advice — Metav Werkzeuge can advise on compatibility and delivery to your workshop via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.9047 SKU: DZ.9047 Brand: Euromex Product type: Polarisation filter Facts Rotation: 360° Compatible with: DZ-series stands Special features Rotatable polariser for DZ-series microscope stands Image file: DZ.9047.jpg FAQ How does the rotating polariser improve contrast? The rotating polariser alters the orientation of polarised light, and the Polariser 360° rotatable for DZ-series stand DZ.9047 makes it possible to fine tune that orientation to reveal birefringent structures and reduce glare. Is this polariser compatible with all DZ-series stands? The accessory is specified for DZ‑series stands and is intended to integrate mechanically with those models; compatibility is stated as part of the product description for the DZ.9047 unit. Can the polariser be used for material inspections in workshops? Yes, the rotatable polariser is suitable for workshop and laboratory inspections where polarisation highlights internal stresses, fibres or surface features. Does the unit require electronic control or calibration? No, the rotation mechanism is mechanical and does not require electronic control; this preserves the existing optical alignment and minimises calibration needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise 360° rotation and a quick-fit slider mount for faster contrast adjustment and uninterrupted workflow; order the accessory directly via Metav Werkzeuge or consult the team for compatibility advice. Euromex iScope IS.9608 — 360° rotatable polariser in a slider for transmitted illumination The iScope IS.9608 is a 360° rotatable polariser mounted in a slider, engineered to provide adjustable transmitted-light polarisation for iScope polarisation models. 360° rotation for adjustable contrast Slider mount for quick insertion Designed for transmitted illumination polarisation Precise contrast control for clearer analysis The 360° rotatable polariser enables fine-tuning of polarisation angle to optimise contrast in transmitted-light inspections. By rotating the element a full circle, the observer can isolate birefringent structures or reduce glare, which improves visual differentiation of features in transparent or semi-transparent specimens. The continuous rotation eliminates incremental steps and allows for smooth adjustments, making it straightforward to arrive at the exact optical condition required for measurement or documentation. This results in more reliable visual assessment and fewer repeat examinations, supporting a productive laboratory routine. Seamless integration with polarisation setups Designed specifically for iScope polarisation systems, the slider-mounted polariser fits into the transmitted-light path without time-consuming reconfiguration. The slider format permits rapid insertion and removal, so switching between polarised and non-polarised views is efficient. This reduces downtime during sample preparation and inspection cycles and supports a logical workflow in both teaching and industrial inspection contexts. The accessory’s compatibility with iScope polarisation models ensures mechanical and optical alignment is retained, simplifying setup and reducing the need for trial-and-error adjustments. Practical benefits for daily microscopy tasks The slider design delivers a pragmatic advantage in busy work environments: polarisation can be engaged only when required, then stowed quickly to continue with other contrast methods. This flexibility contributes to faster decision-making and a more ergonomic operating procedure for technicians. Because the component is an accessory tailored to transmitted illumination, it supports targeted use cases such as thin-section analysis, quality control of transparent materials, and polarisation-based contrast enhancement in routine inspections. Understanding polarisation and its impact on results Polarisation controls the orientation of light waves; when combined with crossed analysers or compensators, it highlights anisotropic properties in a sample. Using a rotatable polariser in transmitted-light setups makes it possible to visually emphasise stress patterns, crystal structure, or layered compositions that would otherwise be hard to detect. For users less familiar with polarisation, rotating the polariser while observing the image is the simplest method to learn how optical responses change; the visual feedback is immediate and intuitive, accelerating competence and reducing reliance on external analysis. Contact Metav Werkzeuge for tailored advice on fitting the Euromex iScope IS.9608 to existing microscopes and to arrange supply; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: IS.9608 SKU: IS.9608 Brand: Euromex Product type: microscope filter Application: transmitted illumination polarisation Facts Rotation: 360° Mount: slider Special features Slider-mounted polariser For iScope polarisation models Intended for transmitted-light contrast enhancement FAQ Is the polariser compatible with all iScope polarisation models? The Euromex IS.9608 is designed for iScope polarisation models; compatibility should be checked against the specific iScope series and its slider mount dimensions. How does the 360° rotation improve image interpretation? Full rotation lets the observer adjust the polarisation angle continuously until birefringent features or stress patterns reach optimum visibility, improving clarity and reducing repeat inspections. Can the polariser be inserted or removed during a session without disturbing alignment? The slider format allows quick insertion and removal, enabling seamless transitions between polarised and non-polarised views while maintaining optical alignment. Is this accessory suitable only for specialist laboratories? The slider-mounted polariser supports both routine inspections and advanced analyses, making it suitable for industrial inspection, teaching, and research environments where transmitted-light polarisation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from 360° rotation and an integrated polarisation filter for precise sample orientation and enhanced contrast in polarised-light routines; compact form factor allows straightforward integration into existing microscopy workflows. Order the Euromex SB.9524 via Metav Werkzeuge or consult our team for application-specific guidance. SB.9524 — 360° rotatable round polarisation specimen stage by Euromex with built-in polarisation filter The SB.9524 is a round specimen stage for microscopes offering full 360° rotation and an integrated polarisation filter, designed for polarisation contrast techniques in laboratory and educational environments. 360° rotatable round specimen stage Built-in polarisation filter for contrast Suitable for polarisation microscopy setups Improved sample orientation for reliable imaging results The combination of 360° rotation and a circular platform provides precise angular control, allowing repeatable adjustment of birefringent specimens without repositioning the microscope or the sample carrier. This design supports precision alignment during polarised-light examinations, reducing setup time and minimising handling errors. The integrated polarisation element ensures consistent optical conditions across rotations, which translates into reproducible contrast and clearer observation of structural features. Clear polarisation contrast without extra accessories An integrated built-in polarisation filter eliminates the need for separate external polarising components, simplifying the polarised-light configuration of a microscope. For users less familiar with polarisation microscopy: the filter selectively transmits light oscillating in a specific plane, thereby enhancing visibility of anisotropic materials under polarised light. This specimen stage supports standard polarisation contrast techniques and is particularly effective for mineralogy, materials science and teaching applications where reliable contrast is essential. Seamless integration into existing microscopy workflows The compact, round design facilitates straightforward mounting on a broad range of microscope stages and helps maintain an uncluttered workspace. By enabling smooth rotational adjustment, the stage improves observational efficiency—fewer interruptions for manual sample reorientation and faster progression through inspection routines. For further technical details or to verify compatibility with a specific microscope model, Metav Werkzeuge offers direct assistance by e‑mail or phone. Secure polarisation-capable handling with the Euromex SB.9524 — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical Data Article number: SB.9524 Manufacturer: Euromex SKU: SB.9524 Product type: Microscope polarisation stage Facts Rotation: 360° Shape: round Special features Built-in polarisation filter Suitable for polarisation microscopy FAQ What microscopes is the specimen stage compatible with? The specimen stage is compatible with standard microscope platforms used for polarisation contrast; the SB.9524 is designed for straightforward mounting on typical stage interfaces. How does the built-in polarisation filter improve imaging? An integrated polarisation filter in the SB.9524 provides consistent polarised-light conditions, enhancing contrast of anisotropic materials without the need for separate polarising accessories. Is the rotation continuous or stepped? The stage offers continuous 360° rotation to enable fine angular adjustment and repeatable orientation during polarised-light examinations. Can the platform be used for educational demonstrations? Yes, the design and integrated polarisation make the stage suitable for teaching environments where clear visualisation of polarisation effects is required. Where to get further technical information or compatibility advice? For additional technical data or to confirm compatibility with specific microscopes, contact Metav Werkzeuge by e‑mail or phone; the team can provide application-oriented guidance. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a precise blue filter with a compact 45 mm diameter yields controlled illumination and improved contrast in microscopy applications; order the blue filter IS.9700 directly via Metav Werkzeuge or consult our advisors for compatibility and stock information. Blue filter 45 mm for lamp housing IS.9700 — Euromex microscope filter, 45 mm diameter for lamp housings Blue filter 45 mm for lamp housing IS.9700 is a purpose-made accessory for microscope illumination systems, designed to be fitted into compatible lamp housings to refine light characteristics and support clearer imaging. Blue filter for microscope illumination 45 mm diameter for standard lamp housings Article number IS.9700 by Euromex Improved contrast through targeted illumination The blue filter shifts the spectral composition of the lamp output towards shorter wavelengths, which can enhance visual contrast for certain specimens and reduce dominant warm tones from halogen or LED light sources. For routine inspection and educational microscopy, this results in sharper perceived edges and more distinct colour separation without altering the optical path. The accessory is intended for integration into the lamp assembly rather than the objective or eyepiece, so the effect is applied at the illumination stage and is compatible with standard transmitted and reflected light set-ups. This approach helps to accentuate details in stained samples and surface features while maintaining a simple, passive modification to the lighting. Compact, compatible design for simple integration With a nominal diameter of 45 mm, the filter is sized to suit common lamp housings used in microscopy accessories; the compact format supports quick installation and minimal adjustment of the existing lighting unit. The product is presented as an accessory component for microscope illumination systems and is identified under IS.9700 for ordering and inventory purposes. Due to its straightforward form factor, the filter can be combined with other illumination accessories such as diffusers or polarising elements, enabling modular adaptation of the light source without extensive reconfiguration. The compact design reduces the footprint within the lamp housing while providing a consistent optical effect. Practical considerations for laboratory and workshop use The filter is supplied as a dedicated microscope accessory and listed under the Euromex range, making it suitable for quality-controlled laboratory environments and educational institutions. As a passive optical component, it requires no electrical connection and imposes no maintenance beyond occasional cleaning with appropriate, non-abrasive materials. For procurement and logistical reliability, the item is available through Metav Werkzeuge, where stock levels and delivery options can be checked; the clear article reference IS.9700 ensures correct ordering and reduces the chance of specification errors. When in doubt about compatibility with a particular lamp housing, technical advisors can verify fitment using the lamp aperture and accessory mounting details. For availability and tailored advice on the Euromex blue filter IS.9700, contact Metav Werkzeuge for stock checks and specification guidance at Metav Werkzeuge GmbH. Technical Data Article number: IS.9700 SKU: IS.9700 Manufacturer: Euromex Product type: Microscope filter Label: Blauer Filter 45mm für Lampengehäuse IS.9700 Facts Diameter: 45 mm Image file name: IS.9700.jpg Image file size: 97,751 bytes Special features Blue optical filter For lamp housing applications Microscope illumination accessory Category: Filter (Microscopy accessories) FAQ What is the primary effect of the blue filter on microscopy illumination? The blue filter IS.9700 narrows and shifts the lamp spectrum towards blue wavelengths, which enhances contrast and colour separation for many specimens when fitted into the lamp housing. Will the filter fit any microscope lamp housing? The filter is designed for a 45 mm diameter aperture; compatibility depends on the lamp housing's internal diameter and mounting method, so verify the lamp aperture before ordering IS.9700. How should the filter be cleaned and maintained? Clean the glass surface gently with a lint-free cloth and mild optical cleaner; avoid abrasive materials to preserve the filter coating and optical quality of IS.9700. Is the Euromex filter suitable for both transmitted and reflected light setups? Yes, the filter is an illumination accessory and can be used with both transmitted and reflected lighting systems, provided the lamp housing accepts a 45 mm accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise colour filtration and simple integration for consistent illumination in inspection and imaging workflows; the combination of reliable spectral control and standard 45 mm sizing ensures repeatable results — order the green filter via Metav Werkzeuge or consult the technical team for compatibility checks. Green Filter 45 mm for Lamp Housing IS.9702 — Green illumination filter, 45 mm diameter, Euromex The Green Filter 45 mm for Lamp Housing IS.9702 is a compact microscope illumination filter intended to modify light output for improved contrast and colour balance in inspection and imaging applications. Accurate colour correction for illumination Compact 45 mm diameter for standard housings Simple insertion for lamp assemblies Compatible with microscope illumination systems Consistent colour and improved contrast for reliable inspection The green filter IS.9702 shifts lamp emission toward the green spectral band to enhance spectral contrast for colour-sensitive tasks. In practice, this results in clearer differentiation of features under transmitted or reflected light, which supports faster decisions in routine inspection. The standard 45 mm diameter ensures compatibility with a wide range of lamp housings used in laboratory and workshop environments, providing a predictable optical effect without the need for additional accessories. Quick integration into existing illumination setups Designed for direct use in lamp housings, the accessory permits simple insertion and can be used in typical microscope illumination chains. Because the component is a dedicated illumination filter, it reduces the need for software post-processing by delivering a more suitable colour balance at source. The reduced setup complexity increases throughput for repetitive tasks and lowers the risk of variation between sessions, making the filter a practical choice for both educational and industrial microscopy applications. Reliable supply and experienced distribution for professional use Procurement through an established supplier provides continuity for production and lab operations. Metav Werkzeuge acts as a quality filter in the supply chain and combines practical logistics with sector expertise, supporting access to precision accessories across Europe. With an extensive portfolio and a history of servicing many workshops, Metav offers dependable availability and product information to support integration into inspection workflows, helping to maintain consistent results. For procurement guidance and availability of the IS.9702 green filter, contact Metav Werkzeuge for expert advice and compatibility checks for existing lamp housings. Technical data Article number: IS.9702 SKU: IS.9702 Product type: Microscope filter Manufacturer: Euromex Label: Grüner Filter 45mm für Lampengehäuse IS.9702 Facts Diameter: 45 mm Image file size: 92,762 bytes Image filename: IS.9702.jpg UID: IS.9702 Special features Green optical filter for lamp housing Intended for microscope illumination Compatible with 45 mm lamp holders FAQ What is the primary function of this filter? The green filter IS.9702 narrows lamp output toward the green band to increase contrast and improve visual separation of colour-dependent details during microscopy inspections. Which lamp housings is the accessory compatible with? The component is intended for lamp housings that accept a 45 mm insert; compatibility with specific assemblies depends on the housing inner diameter and mounting method. Can this filter be used with microscopes for transmitted and reflected light? Yes, the filter is suitable for both transmitted and reflected illumination where a green-dominant spectrum improves feature visibility in microscopy and visual inspection tasks. How should the filter be handled and cleaned? Handle the optical surface with care; clean using a soft, lint-free cloth and suitable optical cleaner. Avoid abrasive materials and excessive pressure on the glass surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable polarised illumination and a compact 45 mm diameter support improved contrast for birefringent samples in lamphouse setups. Thanks to simple integration with standard lamphouses and consistent optical performance, the filter assists routine microscopy and teaching applications. Order the Polarisation filter iScope IS.9600 directly via Metav Werkzeuge or ask our consultants for tailored advice. Euromex iScope IS.9600 — Polarisation filter, 45 mm for lamphouse A Polarisation filter iScope IS.9600 engineered to enhance contrast in transmitted-light lamphouse illumination for the observation of birefringent and anisotropic specimens. 45 mm diameter for lamphouse Improves contrast for birefringent samples Compatible with iScope lamphouse series Clearer contrast for polarised microscopy A dedicated polarisation filter enhances visibility of structures that alter polarised light, making features in birefringent materials stand out against the background. By introducing controlled polarisation into the illumination path, the accessory increases image contrast without changing the objective optics. The compact 45 mm size is specified for lamphouse integration, so laboratories and teaching facilities benefit from a device that focuses on improving sample contrast while keeping the microscope's optical train unchanged. Easy fitting and reliable compatibility Designed for straightforward placement in the lamphouse, the accessory avoids complex alignment procedures and supports reproducible results during routine use. The item belongs to the iScope series and matches typical lamphouse mounts, enabling quick replacement or addition to existing setups. Installation requires no specialised tooling; once in place, the polariser maintains consistent orientation relative to the condenser and analyser, which is essential for repeatable polarised-light examinations and comparative documentation. Practical handling and application guidance For everyday laboratory work the filter provides dependable optical behaviour with minimal maintenance: gentle cleaning of the glass surfaces and careful handling protect the optical element and preserve its performance. As an optical accessory it is particularly useful in mineralogy, materials science and education where polarised illumination reveals internal stresses, crystallinity and anisotropy. When planning an experiment, consider the lamphouse aperture and condenser configuration to ensure the filter delivers the intended contrast enhancement. For precise polarised imaging with Euromex optics, contact Metav Werkzeuge for supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and compatibility guidance from Emmerich. Technical data Article number: IS.9600 Manufacturer: Euromex Series: iScope Type: Polarisation filter SKU: IS.9600 Application: for lamphouse Diameter: 45 mm Facts Diameter: 45 mm Special features Polarisation accessory for transmitted-light lamphouse Enhances contrast of birefringent and anisotropic samples Category: Polarisation (microscopy accessory) FAQ What is the primary purpose of a polarisation filter? A polarisation filter modifies the illumination to reveal birefringence and anisotropic features; the Euromex Polarisation filter iScope IS.9600 is supplied for lamphouse use to improve contrast in such samples. Will the filter fit existing lamphouses? The accessory is specified as a 45 mm unit for lamphouse integration and is compatible with typical iScope lamphouse fittings, as indicated by the IS.9600 designation. How should the filter be cleaned and cared for? Clean glass surfaces with a lint-free cloth and suitable optical cleaner; the Euromex IS.9600 should be handled by the edges to avoid fingerprints and preserve optical quality. Which applications benefit most from this polariser? Mineralogy, materials analysis and teaching labs gain most from polarised illumination because the IS.9600 highlights internal stresses, crystalline orientations and other anisotropic properties. Is technical advice available for integration into a specific microscope? Technical guidance is available; Metav Werkzeuge can advise on compatibility and installation for the Euromex IS.9600 to ensure correct lamphouse and condenser alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 45 mm white diffusion element and its compatibility with standard lamp housings to achieve more consistent illumination and fewer retakes in routine microscopy. Order the filter directly via Metav Werkzeuge or consult the Metav team for compatibility details and rapid delivery. Euromex IS.9706 — White 45 mm microscope filter for lamp housings The Euromex IS.9706 is a white diffusion filter designed to produce even illumination in microscope lamp housings and similar lighting assemblies. 45 mm diameter for standard lamp housings Uniform white light diffusion Designed for straightforward installation Consistent illumination for reliable image capture A white diffusion element evens out light output from the lamp housing, reducing hotspots and reflections that can impair image quality. The 45 mm diameter matches common lamp-seat dimensions, so the result is uniform illumination across the field of view. Less variance in light distribution translates into fewer repeated captures and a steadier baseline for image analysis, which supports efficient laboratory routines and dependable documentation. Fits typical microscope lamp housings for quick integration The component is intended specifically for installation into microscope lamp assemblies and analogous housings; its nominal 45 mm size makes it suitable for many standard fittings. As a passive optical accessory, it integrates without electrical modification, offering a straightforward option for retrofitting existing lighting setups. Compatibility with conventional lamp seats simplifies stocking decisions and reduces the need for multiple, specialised spare parts. Improves visual comfort and analytical consistency By producing softer, more evenly distributed light, the white filter reduces glare and eases visual fatigue during prolonged inspections. The diffusion effect enhances contrast uniformity without altering colour balance, which is beneficial for both human observation and digital imaging workflows. This small optical addition can therefore contribute to higher throughput by lowering the incidence of rework due to uneven lighting. Simple handling with practical benefits for workshops and labs The design focuses on practicality: a compact microscope filter that is easy to store and deploy as part of routine maintenance of illumination systems. The unobtrusive white diffuser supports consistent results over repeated sessions and fits into organised spare-part inventories. For teams aiming to standardise lighting across multiple instruments, the filter offers a low-effort measure to harmonise performance between stations. For reliable, uniform illumination in microscopy applications, request the Euromex IS.9706 white filter from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast dispatch. Technical Data Article number: IS.9706 SKU: IS.9706 Manufacturer: Euromex Product type: Microscope filter Data Diameter: 45 mm Image file size: 52329 bytes Special features White diffusion filter For lamp housings Product label: Weißer Filter 45mm für Lampengehäuse IS.9706 Intended application: microscope lamp illumination FAQ What diameter does the filter have? The Euromex IS.9706 is specified with a 45 mm diameter for use in matching lamp housings. What is the intended application of this component? This component is a white diffusion microscope filter intended for use in microscope lamp housings and similar illumination assemblies. Which article number and SKU identify this product? The item is listed as IS.9706 and uses the same value for the SKU. Who manufactures the filter? The filter is produced by Euromex and sold under the designation IS.9706 as a microscope illumination accessory. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact optical solution that combines a yellow filter with a standard 45 mm diameter for consistent lamp-housing compatibility; the result is improved contrast in transmitted-light applications and straightforward integration into existing microscope illumination. Order supply or request compatibility advice via Metav Werkzeuge if required. Euromex IS.9704 yellow 45 mm microscope lamp filter — yellow filter, 45 mm diameter Euromex IS.9704 is a yellow microscope lamp filter designed to fit lamp housings and to modify illumination for clearer, higher-contrast transmitted-light observation. Yellow 45 mm diameter for lamp housings Fits standard microscope lamp holders Manufactured by Euromex optical accessories Enhanced contrast for transmitted-light inspection A dedicated yellow filter provides a simple, effective way to adjust the light spectrum reaching the specimen, improving visual differentiation of features under transmitted light. By selectively attenuating portions of the illumination, the filter increases apparent contrast for many common samples, which can reduce the need for repeated staining or complex image processing. This optical solution delivers a tangible benefit in routine inspection tasks: faster visual assessment with fewer adjustments to the microscope's illumination system. Simple compatibility and quick installation With a nominal diameter of 45 mm, the filter is sized for insertion into compatible lamp housings and holders found on many standard microscope illumination modules. The compact form factor enables a straightforward retrofit without modification of the light source, offering a practical route to upgrade existing setups. Installation and removal require no specialised tools, which helps to keep downtime low and supports continuous operation in busy labs or workshop environments. Reliable accessory for everyday microscopy workflows The filter is intended as a maintenance-friendly accessory for microscopy work where reproducible lighting conditions are important. As a passive optical component it demands minimal care: periodic cleaning of the optical surface preserves image quality and prevents stray reflections. The design supports consistent results across repeated inspections, helping to standardise visual evaluation and to enhance process reliability in quality control or educational settings. Expert supply and advice from a precision partner Metav positions itself as a partner for accessible precision: a central supplier with extensive inventory and practical expertise for laboratory and workshop customers. Benefit from a supplier that combines broad product availability with technical knowledge, supported from a logistics hub in Emmerich. For questions about fitment, compatibility with a particular illumination module, or batch supply for installation across multiple instruments, Metav Werkzeuge can provide targeted advice and procurement support. For compatibility checks or to discuss supply of the Euromex IS.9704 yellow 45 mm microscope lamp filter for specific equipment, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a tailored recommendation and delivery. Technical data Article number: IS.9704 SKU: IS.9704 Manufacturer: Euromex Product type: Microscope filter Label: Gelber Filter 45mm für Lampengehäuse IS.9704 Core specifications Diameter: 45 mm Image file size (product image): 67991 bytes Special features Yellow optical filter For lamp housings (45 mm) Category: Microscope filter Product image available: IS.9704.jpg FAQ What effect does a yellow filter have on transmitted-light microscopy? A yellow filter modifies the illumination spectrum to increase contrast in transmitted-light observations; the Euromex IS.9704 yellow filter is suitable where warmer, higher-contrast lighting improves visual differentiation of sample features. Will the IS.9704 fit my microscope lamp housing? The IS.9704 is specified with a 45 mm diameter for lamp housings; compatibility depends on the lamp-holder design, so verify the holder diameter on the instrument or consult Metav Werkzeuge for confirmation. How should the yellow filter be cleaned and maintained? Clean the optical surface with a lint-free cloth and appropriate optical cleaner; avoid abrasive materials. Regular cleaning keeps the filter performing reliably in routine microscopy workflows. Can the filter be used with LED and halogen illumination? The yellow filter is a passive optical accessory that can be used with common light sources such as LED or halogen lamps, provided the physical holder matches the 45 mm diameter requirement. Is the filter intended for professional laboratory use? Yes. The filter is designed as a practical accessory for microscopy applications where consistent illumination control and improved contrast are desirable; the Euromex IS.9704 supports standard inspection and educational uses. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 45 mm format combined with reliable yellow spectral filtration to enhance contrast in transmitted-light microscopy; order or request advice easily through Metav Werkzeuge for rapid procurement and technical support. Euromex Yellow Filter for Lamp Housing DX.9704 — 45 mm microscope filter Euromex DX.9704 is a yellow microscope filter designed for insertion into lamp housings to improve contrast and colour balance in brightfield illumination. Yellow spectral filtering for contrast enhancement 45 mm diameter for lamp housings Designed for microscope illumination systems Simple installation and routine upkeep Improve contrast with targeted spectral control A yellow filter alters the lamp spectrum by attenuating shorter wavelengths, which can reduce excessive blue light and help enhance contrast in many transparent or lightly stained specimens. This spectral adjustment supports clearer visual separation of structures without changing objective settings, enabling more consistent observation. The result is a more reliable image rendition under transmitted-light conditions, beneficial in routine inspection and quality-control workflows. Compact 45 mm format for straightforward integration The 45 mm diameter is a decisive specification for compatibility with lamp housings that accept a 45 mm aperture. The compact format simplifies replacement and keeps the illumination path stable, reducing the need for repeated adjustments. Because the component is intended specifically as a lamp housing accessory, fitting it does not require modifications to the illumination assembly; this preserves alignment and repeatability during inspection tasks. Practical benefits for everyday microscopy tasks As a microscope filter, the DX.9704 by Euromex supports improved visual clarity in applications where colour balance and contrast matter, such as routine sample checks and preparatory inspection stages. The filter’s effect is immediate and reversible: it is a non-invasive optical accessory that complements existing lighting rather than altering imaging hardware. This makes it a pragmatic choice for laboratories and workshops seeking straightforward enhancements to image quality. Simple maintenance keeps optical quality consistent Maintenance is kept deliberately simple to preserve optical performance. Regular checks for dust and fingerprints, coupled with gentle cleaning using lens tissue and an appropriate optical cleaner, will maintain transmission characteristics and prevent artefacts. The filter’s role in the illumination path means that modest care extends service life and preserves consistent spectral balance across inspections. For procurement and technical guidance on the Euromex DX.9704 yellow filter, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9704 Brand: Euromex Product type: microscope filter Data Diameter: 45 mm Special features Yellow filter for lamp housing FAQ What is the exact diameter of the filter? The Euromex DX.9704 filter has a diameter of 45 mm and is intended for lamp housings that accept this size. What does a yellow filter achieve in microscopy? A yellow filter reduces shorter wavelengths and helps to enhance contrast and colour balance in transmitted-light observation, improving visual separation of fine features. Will this filter fit my microscope lamp housing? The DX.9704 is designed for lamp housings with a 45 mm aperture; compatibility depends on the lamp housing dimensions rather than the microscope brand. How should the filter be fitted into the lamp housing? The filter is installed directly into the lamp housing aperture; it is designed as an accessory for insertion without modification to the illumination assembly. How can the filter be cleaned and stored? Clean with lens tissue and a suitable optical cleaner; store in a dust-free container when not in use to preserve transmission and prevent surface damage. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high-definition imaging, versatile connectivity and a compact design for consistent documentation and inspection results. Order the HD-Mini VC.3024-HDS directly via Metav Werkzeuge or consult the advisors for application-specific guidance. HD-Mini VC.3024-HDS — Microscope camera with 13-inch HD screen, 2 MP and HDMI output The HD-Mini VC.3024-HDS is a compact microscope camera system designed for clear Full HD imaging and easy integration into inspection workflows. 2 MP Full HD sensor 60 fps live view capability 13-inch HD screen included HDMI and USB digital outputs Accurate imaging that supports rapid inspection decisions Built around a Sony CMOS 1/2.8" sensor, the HD-Mini VC.3024-HDS delivers a 1920 x 1080 pixel image that balances resolution with real-time performance. The 2 MP sensor and a pixel size of 2.9 x 2.9 µm provide sufficient detail for visual inspection, measurement reference and documentation without excessive data overhead. The progressive scan readout ensures stable frames, while the 60 fps live view (mode-dependent) reduces motion blur when analysing moving samples. For production environments this translates into faster decision-making and fewer repeated inspections. Seamless workflow: intuitive screen, fast outputs, and expandable storage Integration into existing setups is straightforward thanks to HDMI and USB digital outputs and the included 13-inch HD screen for immediate visual feedback. The unit accepts SD storage starting with the supplied 32 GB card and supports cards up to 128 GB, enabling extended recording sessions or high-volume image capture. The supplied C-Mount 0.37x adapter and additional lens adapters make mounting to a wide range of microscope objectives quick and reproducible, reducing setup time and minimising downtime during tool changes. Robust operation in variable environments Designed for routine laboratory and workshop use, the system operates across a broad temperature window from -10 °C to 50 °C and within 30–80% relative humidity, offering dependable performance in conditioned labs and many on-site environments. Noise emissions are low at 42 dB, supporting concentration during manual inspection tasks. The camera supports both automatic and manual exposure and white balance control, giving operators a choice between hands-off consistency and fine-tuned image optimisation for challenging specimens. Practical accessories that streamline calibration and measurement The supply package includes practical items that accelerate productive use: a 32 GB memory card, adapter rings for 30.0 mm and 30.5 mm to 23.2 mm, a 10 mm/100 calibration slide for immediate measurement verification and the C-Mount 0.37x adapter for objective matching. These inclusions reduce the need for additional purchases and enable quick verification of scale and focus, which is especially useful when traceable measurement or documentation is required. For project-specific advice or to discuss how the HD-Mini VC.3024-HDS fits into an inspection line, contact Metav Werkzeuge for tailored recommendations and fast supply from Emmerich. Technical Data Article number: VC.3024-HDS SKU: VC.3024-HDS Brand: Euromex Model series: HD-Mini Facts Resolution: 2 MP (1920 x 1080) Sensor: Sony CMOS 1/2.8" Pixel size: 2.9 x 2.9 µm Frame rate: 60 fps (live view, mode-dependent) Display: 11.6" HD screen (label indicates 13" supplied screen) Storage: SD card 32 GB supplied, up to 128 GB supported Noise level: 42 dB Operating temperature: -10 °C to 50 °C Relative humidity: 30–80% Supply voltage: 100–240 Vac; output 12 Vdc / 1 A Sensitivity: 1300 mV/lux-sec Format: 1/2.8", HDTV 1080p Digital output: HDMI Special features Adapter: C-Mount 0.37x Mounting: C-Mount capture Exposure: Automatic / Manual White balance: Automatic / Manual Scan mode: Progressive scan Included accessories: 32 GB memory card; adapter rings 30.0 mm and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C-Mount adapter 0.37x Connection types: HDMI and USB Compact dimensions: 50 x 50 x 60 mm FAQ What image quality can be expected from this camera? The camera delivers Full HD images at 1920 x 1080 with a 2 MP sensor and a pixel size of 2.9 µm, providing clear detail suitable for inspection and documentation tasks with the HD-Mini VC.3024-HDS. Can the camera record continuously to an SD card? Yes, the system accepts the supplied 32 GB SD card and supports cards up to 128 GB, allowing extended recording sessions when using the HD-Mini VC.3024-HDS. Is the live view smooth enough for moving samples? With a 60 fps live view (depending on mode and conditions) and progressive scan, the unit provides reduced motion blur for smoother inspection of moving or dynamic specimens. Which outputs are available for display or capture systems? The camera offers HDMI digital output and USB connectivity for integration with displays and capture hardware in inspection setups. Are measurement standards included for calibration? A 10 mm/100 calibration slide is included to verify magnification and support basic measurement routines with the system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com