Take advantage of the combination of precise sample positioning, robust mechanics and straightforward readout for reliable microscopy workflows; order the stage directly via Metav Werkzeuge or consult the team for application advice. Mikroskoptisch EcoBlue EC.9500 — attachable mechanical X‑Y stage, 51 × 26 mm travel (Euromex) The Mikroskoptisch EcoBlue EC.9500 is an attachable mechanical X‑Y stage designed to bring controlled lateral movement to educational and routine laboratory microscopes in a compact format Attachable mechanical X‑Y stage 51 × 26 mm translation range Double vernier with separate horizontal knobs Faster sample alignment through precise lateral control The mechanical X‑Y stage offers a compact and reliable way to position specimens with repeatable accuracy. With a 51 × 26 mm translation range, the platform allows fine lateral movements while preserving working distance, so slide navigation becomes more efficient and less time-consuming. The integrated double vernier enables readable sub-divisions for coarse and fine adjustments, which reduces repositioning time and contributes directly to improved throughput in teaching or routine inspection tasks. The clear mechanical feedback of the separate horizontal knobs supports controlled steps and prevents inadvertent overshoot, making specimen handling both faster and safer. Built for educational benches and routine laboratory use As an attachable accessory, the stage fastens to a wide range of microscope frames, transforming standard stands into more versatile inspection systems without complex retrofitting. The platform’s straightforward construction is deliberately robust, designed for repeated daily handling in classrooms, service workshops and quality-control benches. Low complexity in the mechanics translates into low maintenance requirements and predictable long-term performance, which makes this stage a practical choice where ease-of-use and uptime are priorities rather than elaborate automation. Clear readout and understandable adjustment for confident operation The twin-scale layout of the vernier provides interpretable position feedback even for users new to precision stages: one scale for the main coarse position and a second vernier for fine interpolation. This arrangement simplifies the concept of graduated movement, so teams can rely on measured shifts rather than guesswork. The readable markings combined with tactile knobs allow precise incremental steps and straightforward documentation of sample coordinates, aiding repeatable observation and straightforward handover between users. Practical benefits for workshops and teaching environments This platform is particularly attractive where a compact footprint and dependable mechanical control are required. The stage supports routine microscopy workflows by enabling controlled sample scanning and documented positioning without the need for electronic drives. Its practical design contributes to a cost-effective upgrade path for institutions and small laboratories seeking measurable gains in handling efficiency. If clarification is needed regarding compatibility or intended use, assistance is available to help match the stage to the specific microscope stand or application. Contact Metav Werkzeuge today for tailored advice and to secure this attachable stage for improved sample alignment on every microscope Technical data Article number: EC.9500 SKU: EC.9500 Model series: EcoBlue Product type: microscope stage Brand: Euromex Measurements / Performance Translation range: 51 × 26 mm Special features / Design Attachable mechanical X‑Y stage Double vernier scale Separate horizontal adjustment knobs Suitable for microscopes (education and routine laboratory use) FAQ How much lateral travel does the stage provide? The EcoBlue EC.9500 offers a translation range of 51 × 26 mm, enabling controlled lateral movement across typical specimen sizes. Is the stage compatible with different microscope stands? The attachable design is intended for common microscope frames and adapts the inspection bench to controlled X‑Y movement without complex installation. How does the double vernier support fine positioning? The double vernier gives a coarse main scale and a secondary finely graduated vernier, allowing precise interpolation for repeatable specimen placement. Is the mechanism suitable for classroom use? Yes, the robust mechanical design and clear readout make the platform well suited to educational environments and routine laboratory tasks. Can the stage be used for documentation of sample positions? The readable scales and tactile knobs enable documented and reproducible positioning, aiding routine inspection and repeated observations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise polarisation control, reliable 530 nm retardation and quick slider insertion for reproducible contrast in incident‑light applications; order the 1λ plate, first‑order red 530 nm in slider for incident‑light illumination for iScope polarising models IS.9610-R directly via Metav Werkzeuge or ask our consultants if needed. 1λ plate, first-order red 530 nm in slider for incident-light illumination for iScope polarising models (Euromex IS.9610-R) The 1λ plate, first‑order red 530 nm in slider for incident‑light illumination for iScope polarising models is a compact optical compensator designed for insertion into the incident‑light path to enhance birefringence contrast and standardise colour response in polarised light microscopy. First‑order red 530 nm retardation Slider mount for fast insertion Compatible with iScope polarising models Faster, reproducible contrast for polarised light inspection The 1λ plate supplies a constant 530 nm retardation, converting subtle phase differences into a stable colour shift that simplifies interpretation of stress patterns and birefringent structures. Mounted in a slider, the compensator is ready for rapid engagement or removal without disturbing the sample stage, which supports consistent imaging routines and reduces downtime between measurements. For laboratories requiring repeatable visual references, the fixed first‑order red response acts as a reliable optical standard. Clear optical reasoning that non‑specialists can follow A retarder or compensator introduces a known phase delay between orthogonal polarisation components; the first‑order red plate creates a single‑wavelength retardation equivalent to one lambda at roughly 530 nm, producing a characteristic red‑green colouration under cross polarisation. This controlled colour response makes it easier to distinguish materials and stress fields without complex calibration equipment. The effect is directly observable in transmitted or reflected light set‑ups that support incident‑light polarisation, aiding rapid assessment and documentation. Practical compatibility and application scenarios Engineered for iScope polarising units, the insert fits into the dedicated slider for incident‑light illumination, ensuring mechanical and optical alignment with the existing polariser/analyser train. Typical applications include qualitative stress analysis, contrast enhancement for transparent or semi‑transparent specimens, and routine teaching demonstrations where consistent visual cues accelerate learning. The compact format integrates with bench workflows, supporting both quick inspections and stepwise imaging protocols. Integration benefits and operational reliability Using a purpose‑made 1λ compensator minimises variability between sessions and operators, which contributes to stronger data comparability across samples and time. The slider mechanism enables safe handling and keeps the optical surface accessible for inspection and cleaning. Where image reproducibility and clear birefringence rendering are essential, this accessory provides a straightforward optical upgrade that harmonises with the existing iScope polarising configuration. For standardised polarisation contrast, select the Euromex IS.9610-R first‑order red 1λ plate and contact Metav Werkzeuge for product advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: IS.9610-R SKU: IS.9610-R Manufacturer: Euromex Product type: Microscope illumination Label: 1/λ‑plate first red 530 nm in slider for incident‑light illumination for iScope polarisation models Facts Wavelength: 530 nm Order: first‑order (1λ) Special features Slider mount for incident‑light path insertion Designed for iScope polarising models Provides first‑order red retardation for birefringence contrast FAQ What visual effect does the first‑order red 530 nm plate produce? The first‑order red plate produces a characteristic red‑green colouration under crossed polarisers, transforming phase differences into an immediate visual contrast that the Euromex IS.9610-R makes easy to observe. Is the slider compatible with all iScope polarising models? The slider is designed for iScope polarising models that accept accessory inserts; check the specific iScope configuration to confirm mechanical fit with the Euromex IS.9610-R. Can the retarder be used in reflected (incident) light only? The accessory is specified for insertion into the incident‑light path; its effect is optimised for reflected‑light polarising set‑ups on compatible iScope units. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise polarisation control and straightforward integration: the 530 nm first-order retardation and slider mounting ensure consistent transmitted-light contrast for polarised microscopy workflows. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice and delivery from Emmerich. 1/λ Plate First-Order Red 530 nm Slider for iScope Polarisation Models IS.9610 — Transmitted-Light Retarder by Euromex The 1/λ Plate First Red 530 nm (IS.9610) is a dedicated first-order retarder in a slider mount, designed for transmitted-light illumination within iScope polarisation model ranges to enhance contrast and reveal birefringent structures. First-order red retardation 530 nm Slider mount for transmitted light illumination Compatible with iScope polarisation models Accurate polarisation control for inspection and analysis The first-order (1/λ) retardation at 530 nm provides a well-defined phase shift for transmitted-light polarisation microscopy, facilitating reliable identification of birefringent materials. As a retarder plate, it produces a controlled colour shift that makes internal stresses, fibre orientations and crystalline structures visible; this enables repeatable results in quality control and material analysis. The optical specification is concise and directly supports quantitative interpretation of polarised images, reducing ambiguity during inspections. Simple integration and operational efficiency Mounted in a slider for transmitted-light illumination, this retarder is intended for quick insertion and removal from the optical path, allowing efficient alternation between polarised and non-polarised observation modes. The compact slider format minimises downtime during sample changes and supports workflows in teaching laboratories and production inspection benches. Compatibility with the iScope polarisation range means the accessory aligns with established holders and illumination geometries, maintaining optical alignment without additional adapters. Reliability for routine laboratory and teaching use Designed as an accessory for polarisation-capable microscopes, the component emphasises stability and consistent optical performance over repeated use. The defined 530 nm wavelength target ensures predictable interference colours, aiding both novice users and experienced microscopists in interpretation. When used in routine examinations, the plate contributes to faster decision making through clearer contrast and enhanced visibility of anisotropic materials, supporting productivity in both research and industrial environments. For component supply or technical clarification on the Euromex 1/λ Plate First-Order Red 530 nm (IS.9610), contact Metav Werkzeuge to arrange delivery from Emmerich and confirm compatibility with an existing iScope polarisation setup. Technical Data Article number: IS.9610 Manufacturer: Euromex Product type: Microscope illumination SKU: IS.9610 Facts Wavelength: 530 nm Retarder type: First-order (1/λ) Mount: Slider for transmitted-light illumination Compatibility: iScope polarisation models Special features Brand: Euromex Function: Enhances birefringence contrast Application: Polarisation microscopy, transmitted light Inclusion: Slider-mounted plate for quick use FAQ What optical effect does the 1/λ plate produce? The 1/λ plate (first-order red at 530 nm) introduces a fixed phase shift that creates characteristic interference colours, enabling clearer visualisation of birefringent structures when used with crossed polarisation on the Euromex 1/λ Plate First-Order Red 530 nm (IS.9610). Is this plate compatible with all iScope polarisation models? The IS.9610 is designed for iScope polarisation model ranges; it fits the slider slot used for transmitted-light polarisation accessories and is specified to match the geometry of those models. How does the slider mount benefit routine use? The slider format allows rapid insertion and removal of the retarder from the optical path, which reduces interruption during sample changes and supports quick switching between polarised and non-polarised observations with minimal realignment. Can this retarder be used for teaching as well as production inspections? Yes, the clear interference colours at 530 nm and the straightforward slider operation make it suitable for both educational demonstrations and consistent inspection tasks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a durable nylon construction, wide model compatibility and compact internal dimensions for safe, space-saving transport of microscopes; order via Metav Werkzeuge or contact our consultants for precise fit advice. Nylon Carrying Bag AE.9919 – Microscope carrying bag with 58 × 32 × 24 cm internal dimensions, compatible with multiple Euromex microscope models Nylon Carrying Bag AE.9919 is a tailored transport solution for iScope, bScope, StereoBlue, Oxion and BioBlue.lab microscopes, designed to keep instruments organised and protected during storage and transit Durable nylon construction for everyday use Compatible with iScope, bScope, StereoBlue, Oxion, BioBlue.lab Internal size: 58 × 32 × 24 cm Secure protection and clear technical fit for workshop use The nylon outer material provides a resilient barrier against light wear and dust, while the clearly stated dimensions—58 (H) × 32 (L) × 24 (D) cm—allow reliable assessment of fit for common benchtop microscopes. Listing the supported models ensures straightforward compatibility checking: the bag is specified for iScope, bScope, StereoBlue, Oxion and BioBlue.lab, so selection is driven by measured instrument size rather than guesswork. This transparent, data-led specification reduces the risk of returns and supports uninterrupted workflow in laboratories and service shops. Practical handling and storage that speeds daily routines Compact internal proportions make the bag simple to stow on shelving or in vehicle lockers, and the lightweight fabric keeps handling effortless during instrument transfers between sites. The clear model list streamlines purchasing decisions in procurement processes: procurement teams can match the carrying solution to device type without further measurements. If clarification is needed regarding fit or intended use, technical enquiries may be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance from the central distribution hub. Confidence in supply and a partner for precision Metav’s position as a precision partner means the product is offered through a supplier that prioritises availability and quality control across Europe. The pragmatic logistics from Emmerich serve as a quality filter for incoming stock, and a broad portfolio supports consolidated sourcing strategies. For workshops and trade customers seeking consistent delivery and verified compatibility, this transport solution is integrated into an established supply chain that eases procurement and operational planning. For secure and reliable transport of delicate instruments, contact Metav Werkzeuge for tailored advice on the AE.9919 nylon carrying bag and delivery directly from our Emmerich warehouse. Technical Data Article number: AE.9919 SKU: AE.9919 Brand: Euromex Product type: Microscope carrying bag Facts Internal dimensions: 58 × 32 × 24 cm Height × Length × Depth format indicated Special features Material: Nylon Compatible with: iScope, bScope, StereoBlue, Oxion, BioBlue.lab FAQ What microscopes fit in this carrying bag? The AE.9919 nylon carrying bag is specified for iScope, bScope, StereoBlue, Oxion and BioBlue.lab microscopes and fits those models within the stated internal dimensions. Is the material suitable for workshop use? Yes; the bag’s nylon construction is chosen for everyday workshop and laboratory environments where dust resistance and ease of handling are required. How should the internal dimensions be interpreted? Dimensions are given as Height × Length × Depth: 58 × 32 × 24 cm, which should be checked against the instrument’s assembled height and footprint before purchase. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high sensitivity, stable cooled imaging and fast USB 3.0 data transfer for reliable documentation and measurement. Order the cooled 6‑MP microscope camera directly via Metav Werkzeuge or ask our consultants if needed. Cooled 6‑MP microscope camera DC.6000i — Euromex CMEX i, CCD 1‑inch, USB 3.0 The Cooled 6‑MP microscope camera DC.6000i is a high‑resolution imaging module designed for laboratory and industrial microscopy applications where low noise and accurate image detail are required High‑resolution 6 MP sensor Peltier cooling for low noise USB 3.0 high‑speed interface Includes ImageFocus Alpha software Accurate images for measurement and documentation The DC.6000i delivers 6 MP stills at 2748 x 2200 pixels on a CCD 1‑inch sensor, which provides a larger photosensitive area than typical smaller sensors and therefore a higher baseline sensitivity. The comparatively large pixel size (4.54 x 4.54 µm) helps to collect more light per pixel, which translates into clearer detail in micrographs and improved reproducibility for metrology tasks. For inspection and documentation, a wider dynamic range (62.34 dB) and a solid signal‑to‑noise ratio (41.6 dB) reduce the risk of lost detail in high‑contrast scenes, so that measurement routines and image analysis yield consistent data. Stable performance under long exposures and low light Thermal noise is a common obstacle for long exposures and low‑light imaging; the integrated Peltier cooling reduces sensor temperature and thus lowers dark current, enabling longer exposures with less noise. The module’s stated sensitivity (880 mV at 1/30 s) and the cooled sensor design are optimised for demanding inspection tasks that require high fidelity rather than only speed. Reported image rates apply under optimal conditions: 7.5 fps at full resolution and 14 fps at reduced vertical resolution, which support both careful documentation and live observation when faster previews are needed. Integration, workflow and software compatibility The camera uses a USB 3.0 connection for fast data transfer and straightforward integration into standard laboratory workstations. Supplied control and capture via ImageFocus Alpha enable image capture, basic measurement and batch export without extensive custom development. The device is digital by design and suitable for automated capture workflows when paired with image processing systems; the compact interface and well‑specified frame rates make the module a practical choice for inspection benches and teaching laboratories alike. The Euromex DC.6000i supports typical microscopy setups that require a combination of image quality and predictable data throughput. For project quotations, technical clarifications or to request additional image samples for the Euromex DC.6000i, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice and delivery from Emmerich Technical data Article number: DC.6000i Manufacturer: Euromex Model series: CMEX i Product type: Cooled microscope camera Connection: USB 3.0 Facts Resolution: 6 MP (2748 x 2200 pixels) Sensor: CCD 1 inch Pixel size: 4.54 x 4.54 µm Frame rate: 7.5 fps at 2748 x 2200; 14 fps at 2748 x 1092 Dynamic range: 62.34 dB Signal‑to‑noise ratio: 41.6 dB Sensitivity: 880 mV at 1/30 s Special features Peltier cooling ImageFocus Alpha software Digital output USB 3.0 high‑speed interface FAQ What image resolutions and frame rates are available with this camera? The camera captures up to 2748 x 2200 pixels (6 MP); the Euromex DC.6000i delivers 7.5 fps at full resolution and 14 fps at 2748 x 1092 under optimal conditions. How does the cooling affect image quality? Integrated Peltier cooling lowers the sensor temperature, reducing thermal noise and enabling longer exposures with less dark current in the DC.6000i, which improves signal quality for low‑light and long‑exposure work. Is special software required to operate the camera? The camera is supplied with ImageFocus Alpha for capture and basic measurement functions; the DC.6000i can also be integrated into custom workflows via its USB 3.0 digital interface. Which sensor type is used and what are the benefits? A CCD 1‑inch sensor is used in the DC.6000i; its larger photosensitive area and 4.54 µm pixels increase sensitivity and dynamic range compared with smaller sensors, supporting precise documentation. Is the camera suitable for industrial inspection as well as laboratory use? Yes. The Euromex DC.6000i’s combination of high resolution, cooled sensor and reliable USB 3.0 connectivity makes it appropriate for both laboratory microscopy and controlled industrial inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact platform with a removable black/white stage plate Ø 60 mm for improved specimen contrast and straightforward integration into stereomicroscope workflows; practical for education and workshop inspection tasks. Order the microscope stage directly via Metav Werkzeuge or ask our consultants if needed. EduBlue ED.9956 microscope stage – removable black/white stage plate Ø 60 mm The microscope stage EduBlue ED.9956 is a compact accessory for stereomicroscopes, designed to provide simple contrast control and a stable platform for small specimens. Compatible with stereomicroscopes Removable black/white stage plate Ø 60 mm Compact, low-profile mounting SKU ED.9956 for straightforward ordering Improved contrast for clearer inspection and documentation The removable black/white stage plate with a diameter of Ø 60 mm enables rapid background changes to enhance contrast during visual inspection or photography. By switching between the black and white surfaces, the platform aids in distinguishing fine edges and translucent specimens that would otherwise blend into a single tone. This practical contrast control reduces the need for complex illumination adjustments and helps standardise visual results across multiple observations, supporting reliable comparisons in teaching and routine quality checks. Seamless integration into stereomicroscope workflows Designed for use with stereomicroscopes, the low-profile platform keeps the specimen close to the objective while preserving working distance and manoeuvrability. The stage's simple mounting and the readily removable plate allow quick adaptation between tasks, which is particularly useful in educational settings and busy workshops where different samples are inspected in sequence. Compatibility with the EduBlue documentation references (AP-1 and AP-2) ensures that the EduBlue series remains consistent across accessories and replacement parts, simplifying inventory and tool management. Practical handling and durable everyday use The stage is intended as a practical solution for repetitive inspection tasks: the removable plate simplifies cleaning and sample exchange, while the compact footprint keeps bench space free for other instruments. As part of the EduBlue family from Euromex, this accessory supports standard classroom and workshop procedures without adding unnecessary complexity. The straightforward design makes it easy to train staff and students on consistent sample presentation, improving throughput and reducing handling errors in routine microscopy work. Contact Metav Werkzeuge today for tailored advice on the Euromex EduBlue ED.9956 microscope stage and its compatibility with existing stereomicroscope setups; call +49 2822 7131930 or email info@metav-werkzeuge.com for information on availability and delivery from Emmerich Technical Data Article number: ED.9956 Manufacturer: Euromex Model series: EduBlue Product type: Microscope stage SKU: ED.9956 Facts Stage plate diameter: Ø 60 mm Special features Black/white stage plate Ø 60 mm (AP-1 and AP-2) Removable stage plate For stereomicroscopes Part of EduBlue series FAQ Is the stage compatible with stereomicroscopes? The stage is designed for use with stereomicroscopes; the EduBlue ED.9956 platform and its black/white stage plate Ø 60 mm suit typical stereo inspection tasks. Can the black/white plate be removed for cleaning? Yes, the black/white stage plate is removable, allowing easy cleaning and quick swapping between backgrounds for consistent contrast. What benefit does the Ø 60 mm plate offer? A Ø 60 mm plate provides a compact working area that supports small specimens while enabling rapid background changes to enhance visibility and documentation. Where is the product series mentioned in documentation? The EduBlue series references the black/white stage plate as AP-1 and AP-2 in the relevant EduBlue documentation; the ED.9956 is listed under that accessory group. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkezeuge.com

Benefit from a compact Ø 60 mm format and contrasting black/white surfaces that simplify specimen presentation; combine these features for reliable visual assessment in routine microscopy workflows and order the set directly via Metav Werkzeuge or consult the company's specialists for technical guidance. Pair of Stage Plates Ø 60 mm SB.9956 — Black/white plates for stereomicroscopes by Euromex Pair of Stage Plates Ø 60 mm SB.9956 offers contrasting stage inserts to improve sample visibility under stereo inspection, optimised for small specimens and routine laboratory workflows Pair of black and white plates Diameter 60 mm For stereomicroscopes Better contrast for faster visual assessment The set provides a clear visual distinction between dark and light backgrounds, enhancing the detection of edges, contours and small details. The contrasting black and white surfaces reduce preparation time by making specimens stand out immediately against the stage. For technicians who perform repetitive visual inspections, this contrast translates into more consistent observations and fewer repositions of samples. The design supports quick switching between backgrounds without the need for additional accessories, helping to maintain a smooth workflow in busy labs. Compact format that suits small specimens and tight setups With a precise Ø 60 mm diameter, these stage inserts are compact enough for confined stage areas yet large enough for many common sample types used in stereo observation. The small footprint makes the plates suitable where stage space is at a premium or when multiple accessories share the microscope stage. The modest size also simplifies alignment and centring of specimens, which contributes to faster set-up times and reduced handling — particularly useful in quality-control benches and educational workstations. Ready compatibility with stereomicroscopy workflows Designed for use with stereomicroscopes, the pair of inserts supports routine inspection tasks where illumination and perspective differ from compound microscopy. The contrasting backgrounds assist in both top-light and side-light arrangements by improving perceived depth and outline clarity. This set is particularly helpful when working with irregularly shaped or reflective samples, since the two-colour option enables selection of the background that offers the best visual separation for the material being inspected. Request technical advice or place an order through Metav Werkzeuge to ensure seamless integration of these Euromex stage plates into the existing microscopy setup — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SB.9956 SKU: SB.9956 Manufacturer: Euromex Product type: Microscope stage Label: Paar Objekttisch-Platten (schwarz/weiß) Ø 60 mm SB.9956 Dimensions / Measurables Diameter: 60 mm Design & Compatibility Pair of black and white plates For stereomicroscopes Contrast-enhancing stage inserts FAQ What is the exact diameter of these stage plates? The Euromex pair of stage plates SB.9956 has a diameter of 60 mm. Are these inserts suitable for stereomicroscopes? Yes, the SB.9956 stage plates are designed for use with stereomicroscopes and support common reflected-light inspection setups. How do the black and white plates improve observation? The contrasting black and white surfaces in the Euromex SB.9956 set enhance edge detection and improve sample visibility, reducing handling and speeding up routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a frosted glass surface combined with a compact Ø 60 mm diameter and straightforward compatibility for efficient sample handling and reliable visual contrast. Order the EduBlue ED.9950 stage plate directly via Metav Werkzeuge or contact our consultants for tailored advice. EduBlue ED.9950 microscope stage plate — frosted glass, Ø 60 mm, for stereomicroscopes (Euromex) EduBlue ED.9950 is a compact stage plate designed to improve specimen visibility and handling under stereomicroscopes in educational and light‑duty laboratory settings Frosted glass, opaque surface Ø 60 mm diameter Designed for stereomicroscopes Enhanced visibility through diffused illumination A frosted glass surface scatters incident light to reduce specular reflections and produce a more uniform background, which increases perceived contrast for small or translucent specimens. This translucent, opaque finish helps avoid distracting hotspots when using incident illumination or oblique lighting techniques common with stereomicroscopes, so users can focus on structural detail rather than glare. For teaching environments and routine inspections, the result is a more consistent image that supports rapid assessments and clearer demonstrations. Compact form factor that fits routine workflows The Ø 60 mm diameter makes the stage plate particularly suitable for small parts, slides and micro‑assemblies, optimising the usable workspace on standard stereomicroscope platforms. The modest footprint aids precise positioning of components and simplifies stage movements without obstructing the operator’s field of view. As a single‑element replacement or accessory, the plate integrates with existing stage clips or holders and supports straightforward exchange, contributing to minimal downtime during instrument preparation. Practical handling and maintenance advantages A glass stage plate is simple to clean and maintains stable optical properties over time, supporting reproducible results in repeated observations. The EduBlue ED.9950 stage plate requires only routine wiping to remove residues, and its surface resists rapid wear typical of softer materials. For classroom settings and light industrial use, this translates into lower maintenance overhead and dependable performance across multiple sessions, preserving image quality and reducing interruptions to teaching or inspection tasks. Contact Metav Werkzeuge today to discuss compatibility details or to arrange supply of the EduBlue ED.9950 stage plate; Metav’s consultants can advise on integration with specific stereomicroscope models and delivery options from Emmerich. Technical Data Article number: ED.9950 SKU: ED.9950 Brand: Euromex Model series: EduBlue Product type: Microscope stage plate Key measurements Diameter: 60 mm Surface: Frosted glass, opaque Compatibility and application For stereomicroscopes Intended for small specimens and educational use Easy to clean surface FAQ What lighting benefits does a frosted stage plate offer? A frosted glass plate diffuses light to reduce glare and hotspots; the EduBlue ED.9950 stage plate improves background uniformity and perceived contrast when inspecting specimens under a stereomicroscope. Will this stage plate fit any stereomicroscope stage? The EduBlue ED.9950 is sized at Ø 60 mm for compact applications and is designed for standard stereomicroscope setups; verify stage clip or holder dimensions before installation for secure mounting. How should the stage plate be maintained? Clean the frosted glass surface with a lint‑free cloth and suitable, non‑abrasive cleaner; routine wiping preserves the optical texture and prolongs consistent imaging with the EduBlue ED.9950. Is the plate suitable for both incident and transmitted illumination? Yes; the opaque, frosted finish is primarily beneficial for incident lighting scenarios common with stereomicroscopes, enhancing contrast for reflective and translucent specimens. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, transparent work surface that combines clarity and robustness for precise specimen inspection; the Ø 60 mm plexiglass design fits small stereomicroscope setups and is straightforward to maintain. Order or request advice via Metav Werkzeuge for fast supply and technical guidance. Transparent Plexiglass Stage Ø 60 mm — Euromex SB.9952 The Transparent Plexiglass Stage Ø 60 mm SB.9952 that serves as a compact, clear tabletop for stereomicroscopes, enabling dependable sample support in laboratory, educational and workshop environments Transparent plexiglass for clear sample view Diameter Ø 60 mm for compact installations Compatible with stereomicroscopes Easy to clean, lightweight and durable Clear visual access for precise inspection The transparent construction delivers unobstructed sightlines to small specimens, making fine adjustment and observation simpler under a stereomicroscope. As a lightweight plexiglass disc, the stage minimises reflections and provides a neutral background that assists in contrast management when inspecting delicate parts or biological samples. The compact format is particularly suited to benches with limited space, where a small, reliable viewing area supports repeatable positioning and efficient workflow. Robust material choice for everyday use Crafted from acrylic, the tabletop combines impact resistance with consistent optical clarity, reducing breakage risk compared with thin glass alternatives. The Ø 60 mm diameter offers a stable platform for small mounts and Petri dishes while remaining simple to handle and replace if required. This functional design supports frequent use in teaching labs and routine quality checks, where endurance and predictable behaviour under lighting are key factors in maintaining measurement and inspection routines. Low-maintenance handling and safe cleaning The smooth surface of the acrylic stage allows straightforward maintenance: routine cleaning removes dust and residues without specialised agents. Its easy to clean nature helps preserve optical quality and reduces downtime between sessions. The lightweight construction facilitates rapid exchange for different optical setups and minimises strain during repeated adjustments, contributing to a more efficient inspection cycle in multi-shift or classroom environments. Versatile fit for microscopes and workflows Designed specifically for use with stereomicroscopes, the disc is compatible with a range of stands and illumination arrangements commonly used in workshops and laboratories. The modest footprint makes it a practical choice for experimental rigs, educational benches and component inspection stations that require a compact clear stage. The combination of clarity, durable material and simple geometry supports consistent visual results and easier integration into existing setups. For product advice and reliable supply of the Euromex Transparent Plexiglass Stage (SB.9952), contact Metav Werkzeuge in Emmerich for tailored recommendations and prompt delivery at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: SB.9952 SKU: SB.9952 Brand: Euromex Product type: Microscope stage Material: Transparent Plexiglas (acrylic) Dimensions / Measurable data Diameter: Ø 60 mm Features / Applications Intended for: stereomicroscopes Form: round transparent tabletop Suitable environments: laboratory, education, workshop FAQ Is this stage suitable for all stereomicroscopes? The Transparent Plexiglass Stage Ø 60 mm SB.9952 by Euromex is intended for use with stereomicroscopes that accommodate a compact round stage; compatibility depends on the instrument's stage mount and working distance. How should the plexiglass tabletop be cleaned? Clean the Euromex tabletop with a soft cloth and mild detergent; the acrylic material resists everyday contaminants and is designed for simple maintenance without abrasive cleaners. Can this stage be used with transmitted illumination? The transparent nature of the SB.9952 allows light to pass through for many transmitted illumination setups, subject to the specific lighting configuration of the stereomicroscope. Is the material scratch-resistant? The stage is made from durable acrylic, which offers improved impact resistance compared with thin glass; however, like all polymer surfaces it can be scratched and should be handled with care. What is the primary application for this tabletop? The Euromex SB.9952 is primarily intended as a compact, clear support for specimen observation on stereomicroscopes in educational, laboratory and light workshop settings. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 5 MP capture and integrated 11.6" HD screen for immediate inspection, combined with HDMI and USB outputs for a seamless imaging workflow; order the unit directly via Metav Werkzeuge or consult our specialists for tailored integration into the production process. HD-Lite VC.3031-HDS microscope camera with 11.6" HD screen and HDMI/USB outputs The HD-Lite VC.3031-HDS is a compact microscope camera with an integrated HD screen, designed for digital imaging, documentation and measurement tasks in laboratory and workshop environments. 5 MP resolution with 2592 x 1944 pixels 11.6" HD screen for live observation HDMI and USB 2.0 digital outputs Includes C‑Mount 0.45x adapter and 16 GB card Sharper captures for reliable inspection The integrated camera unit combines a 5 MP sensor with a Sony CMOS 1/2.8" image sensor and a pixel size of 2 x 2 µm, enabling detail-rich still images at 2592 x 1944 pixels while maintaining usable live previews. The camera uses progressive scan capture, which reduces motion artefacts compared with interlaced systems and supports measurement and documentation tasks where image clarity is essential. Live observation runs at up to 1920 x 1080 at 15 fps (mode dependent), so users gain the benefit of high-resolution captures alongside a fluid live image for positioning and inspection. Integrated display and a streamlined workflow An 11.6" HD screen is built into the device to allow immediate review without external monitors, while HDMI and USB 2.0 outputs permit direct connection to recording devices or PC workstations. The unit is supplied with ImageFocus Plus software for image acquisition and basic measurement routines, and a 16 GB SD card is included for on‑site archiving (supports up to 32 GB). The supplied C‑Mount 0.45x adapter and reduction adapters (30.0 and 30.5 mm → 23.2 mm) simplify mounting to a wide range of microscope heads and stand configurations, reducing setup time and minimizing additional purchases. Built for laboratory and workshop conditions Designed for continuous use, the camera accepts a broad input range (100–240 Vac to 12 Vdc/2 A) and operates across a practical environmental window (0–60 °C; 45–85 % relative humidity). The device reports a measured noise level of 40.5 dB and a sensitivity of 1 V/lux‑sec, characteristics that support daytime-lit bench work as well as controlled inspection environments. The progressive scan sensor and robust power handling make this a dependable choice for routine quality control, R&D documentation and educational demonstration tasks. Ready to use with calibration and accessories The package includes practical accessories to get straight to work: a calibration slide (10 mm/100) for accurate scaling, a 16 GB memory card for immediate image storage and the necessary adapters for common microscope tubes. This means faster commissioning and reproducible measurement results without hunting for additional items. Software-driven workflows and a fully integrated display permit teams to document findings, compare captures and archive results quickly — valuable when traceable records are required for audits or process control. Compatibility with Windows 10, 11 and Mac OS ensures integration into most existing lab IT setups. For expert advice on integrating the Euromex HD‑Lite VC.3031‑HDS into inspection routines or for ordering assistance, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants can advise on mounting, calibration and software workflows. Technical data Article number: VC.3031-HDS SKU: VC.3031-HDS Product type: Microscope camera with screen Model series: HD-Lite Brand: Euromex Core specifications Resolution: 5 MP (2592 x 1944 pixels) Live image: 1920 x 1080 pixels at 15 fps (mode dependent) Sensor: Sony CMOS 1/2.8" Pixel size: 2 x 2 µm Power supply: 100–240 Vac → 12 Vdc / 2 A Operating temperature: 0–60 °C Humidity range: 45–85 % Noise level: 40.5 dB SD card: 16 GB included, up to 32 GB supported Features and accessories Outputs: HDMI and USB 2.0 digital Display: 11.6" HD screen Adapter: C‑Mount 0.45x; adapters 30.0 and 30.5 mm to 23.2 mm Included: 16 GB memory card; calibration slide 10 mm/100 Software: ImageFocus Plus Scan: Progressive scan Sensitivity: 1 V/lux‑sec Live image vs capture: Live image 1080p, capture at 2592 x 1944 FAQ What image resolutions are available for still images and live view? Still images are captured at 2592 x 1944 pixels (5 MP); live view is provided at 1920 x 1080 (Full HD) with up to 15 fps, depending on mode and settings of the HD‑Lite VC.3031‑HDS. Which connections are provided for recording or external monitors? The unit supplies both HDMI and USB 2.0 digital outputs, enabling direct connection to monitors, capture devices or a PC running ImageFocus Plus. Is the camera supplied ready for measurement tasks? Yes — the HD‑Lite VC.3031‑HDS is delivered with a calibration slide (10 mm/100) and ImageFocus Plus software, allowing reproducible scaling and basic measurement workflows. Can the camera be used with common microscopes and stands? The camera includes a C‑Mount 0.45x adapter plus reduction adapters (30.0 and 30.5 mm → 23.2 mm), which cover typical tube diameters found on many microscope heads and inspection stands. Which operating systems are supported for PC integration? Image acquisition and file transfer are supported on Windows 10, Windows 11 and Mac OS, enabling straightforward integration into most laboratory IT environments. What conditions are required for reliable operation? The device operates between 0–60 °C and 45–85 % relative humidity, and accepts 100–240 Vac input for stable use in lab and workshop settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of high-resolution capture and seamless HDMI/USB connectivity to document inspections and measurements efficiently; rely on included adapters and calibration accessories for precise, repeatable results. Order or request advice via Metav Werkzeuge for reliable supply and technical consultation. HD‑Ultra VC.3036 microscope camera — 6 MP capture with HDMI and USB 2.0 HD‑Ultra VC.3036 is a high-definition microscope camera designed for documentation, inspection and measurement tasks in laboratory and workshop environments. 6 MP capture for high-detail imaging HDMI and USB 2.0 digital outputs Sony 1/2.8" CMOS sensor, progressive scan C‑Mount 0.37x adapter included Precise image capture for reliable documentation The HD‑Ultra VC.3036 uses a Sony CMOS 1/2.8" sensor to deliver 6 MP stills with a maximum capture resolution of 3264 x 1836 pixels and a pixel size of 2.8 x 2.8 µm. This combination provides finely resolved images suitable for measurement tasks and quality documentation, reducing the need for repeated captures. The progressive scan operation and good sensitivity (510 mV/lux-sec) support clear, artefact‑free images when documenting small features or threads, helping to preserve traceable visual records for inspection reports. Smooth live inspection and straightforward integration Live feeds are supplied at 1920 x 1080 with frame rates between 30–60 fps (mode dependent), enabling fluid video inspection on external displays via HDMI or direct capture to a workstation over USB 2.0. The camera is supplied with ImageFocus Plus software and a 16 GB SD card (expandable to 32 GB), which facilitates image capture, basic measurement and export workflows. Included adapters for C‑Mount (0.37×) and standard microscope tubes simplify mounting on a wide range of stereo and compound microscopes, ensuring quick integration into existing setups without extensive modification. Built for workshop conditions and traceable measurement Designed for routine use, the camera accepts a supply range of 100–240 Vac to 12 Vdc/2 A, and operates across 0–60°C with relative humidity tolerance of 45–85%, making it suitable for many laboratory and controlled workshop environments. The delivery includes a calibration slide (10 mm/100) and mounting adapters, supporting traceable measurements and repeatable alignment. Low acoustic emission (≈55 dB) and the robust digital outputs make the system convenient for prolonged sessions and collaborative inspection at benches or production lines. Contact Metav Werkzeuge for product advice, availability and tailored configuration options delivered from Emmerich; technical consultants can discuss the HD‑Ultra VC.3036 and compatible accessories for specific inspection tasks Technical Data Article number: VC.3036 SKU: VC.3036 Brand: Euromex Model series: HD‑Ultra Product type: Microscope camera Specs Resolution: 6 MP Capture resolution: 3264 x 1836 pixels Live view: 1920 x 1080 pixels Frame rate: 30–60 fps (live view, mode dependent) Pixel size: 2.8 x 2.8 µm Sensitivity: 510 mV/lux‑sec Operating temperature: 0–60°C Humidity: 45–85% Noise level: 55 dB Power supply: 100–240 Vac to 12 Vdc/2 A SD storage: 16 GB included; max 32 GB Features and Accessories Sensor: Sony CMOS 1/2.8" Scan type: Progressive scan Adapter: C‑Mount 0.37x included Connections: HDMI; USB 2.0 Colour depth: 36 bits Software: ImageFocus Plus Exposure / White balance: Automatic / Manual Included accessories: 16 GB memory card; adapters 30.0 mm and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C‑Mount adapter 0.37x Compatibility: Windows 10, Windows 11, Mac OS FAQ What capture resolution does the camera offer? The HD‑Ultra VC.3036 (Euromex microscope camera, SKU VC.3036) records stills up to 3264 x 1836 pixels with a sensor resolution of 6 MP for detailed documentation. Can the camera display a live full‑HD image and at what frame rate? Live output is 1920 x 1080 at 30–60 fps (mode dependent); the camera supplies this via HDMI and over USB 2.0 for smooth inspection feeds. Is a calibration standard provided for measurements? Yes, the delivery of the VC.3036 includes a calibration slide (10 mm/100) to support traceable measurements when using the Euromex microscope camera with measurement software. Which software and operating systems are supported? The camera is supplied with ImageFocus Plus and is compatible with Windows 10, Windows 11 and Mac OS for capture, annotation and basic measurement tasks. What environmental and power conditions are required for reliable operation? The HD‑Ultra VC.3036 operates between 0–60°C and 45–85% relative humidity; power is via 100–240 Vac to 12 Vdc/2 A, suitable for laboratory and workshop mains supplies. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 5 MP imaging, HDMI and USB connectivity, and included calibration accessories for dependable inspection documentation; order directly via Metav Werkzeuge or consult their specialists for integration advice. Euromex HD-Lite VC.3031 microscope camera — 5 MP sensor with HDMI & USB output The HD-Lite VC.3031 is a microscope camera designed for clear imaging and live Full HD preview in laboratory inspection, quality control and educational environments 5 MP Sony CMOS sensor HDMI and USB 2.0 digital output Live Full HD preview 1920 x 1080 C‑Mount 0.45x adapter included Achieve sharper inspection images and reliable documentation The HD‑Lite VC.3031 delivers a 5 MP capture resolution (2592 x 1944) on a Sony CMOS 1/2.8" sensor, with a pixel size of 2 x 2 µm, enabling detailed still images for failure analysis and documentation. The camera uses progressive scan to record every line of the frame sequentially, reducing motion artefacts compared with interlaced capture and making measurement results easier to interpret. Included calibration material ensures images can be related back to a measurable standard for traceable results. The bundled ImageFocus Plus software provides basic measurement and annotation functions for streamlined reporting. Faster inspection workflows with direct monitor output and flexible storage Digital outputs via HDMI and USB 2.0 allow live inspection on external displays and fast data transfer to workstations. A live preview at 1920 x 1080 provides real-time assessment while high-resolution captures are stored at 2592 x 1944. The camera accepts an SD card (16 GB supplied, up to 32 GB supported) for local image saving, simplifying data handling in production or lab settings where immediate network transfer is not available. The supplied C‑Mount 0.45x adapter and additional adapters for 30.0 / 30.5 mm to 23.2 mm ensure compatibility with a wide range of microscope objectives and stand types. Robust operation and easy setup for routine quality control Exposure and white balance can be set to automatic or manual, enabling consistent imaging across different sample types and lighting conditions. The unit operates between 0–60°C with a humidity tolerance of 45–85%, supporting use in typical laboratory and workshop environments. With a sensitivity of 1 V/lux‑sec and a measured operational noise of 40.5 dB, the camera offers stable performance without disruptive fan noise. The compact housing and progressive scan design make the system suitable for documentation, inspection and teaching tasks where dependable, repeatable images are required. For reliable microscopy imaging and straightforward integration, request procurement or technical advice from Metav Werkzeuge — Metav’s specialists in precision metrology will advise on deployment and supply from Emmerich for fast, dependable delivery Technical Data Article number: VC.3031 Manufacturer: Euromex Product type: Microscope camera Model series: HD‑Lite SKU: VC.3031 Core data Resolution: 5 MP — 2592 x 1944 pixels Live preview: 1920 x 1080 pixels Frame rate: 15 fps (Live image, mode‑dependent) Sensor: Sony CMOS 1/2.8" Pixel size: 2 x 2 µm Power supply: 100–240 Vac to 12 Vdc / 2 A Operating temperature: 0–60°C Humidity range: 45–85% Noise level: 40.5 dB SD storage: 16 GB supplied, max 32 GB Included features Adapter: C‑Mount 0.45x Connections: HDMI; USB 2.0 Scan mode: Progressive scan Colour depth: 24 bits Exposure: Automatic / Manual White balance: Automatic / Manual Software: ImageFocus Plus Format: 1/2.5", HDTV 1080p Sensitivity: 1 V/lux‑sec Accessories included: 16 GB SD card; adapters 30.0 and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C‑Mount adapter 0.45x FAQ What systems is the camera compatible with? The camera supports Windows 10 and 11 as well as Mac OS; the Euromex HD‑Lite VC.3031 can be connected via USB or viewed directly via HDMI. Can the camera provide live Full HD output to a monitor? Yes, the device provides a Full HD live preview at 1920 x 1080 via HDMI while stills can be captured at the full 2592 x 1944 resolution. Is a calibration reference supplied for measurements? A calibration slide (10 mm/100) is included with the HD‑Lite VC.3031 to support traceable measurement and image scaling. What storage options are available for captured images? The camera is supplied with a 16 GB SD card and supports cards up to 32 GB for local storage of images and recordings. Which adapters are included for microscope mounting? Adapters supplied include a C‑Mount 0.45x and rings for 30.0 / 30.5 mm to 23.2 mm, enabling connection to a broad range of microscope tubes and objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of crisp image capture, straightforward digital connectivity and a ready-to-use 11.6" display for immediate inspection work. Order the camera directly via Metav Werkzeuge or consult our specialists for integration advice. HD-Ultra VC.3036-HDS microscope camera with HDMI and USB 2.0, 6 MP capture The HD-Ultra VC.3036-HDS is a high-resolution microscope camera with an integrated HD screen, designed for precise visual inspection and documentation in laboratory and workshop environments 6 MP Sony CMOS sensor for high-detail capture HDMI and USB 2.0 digital outputs 11.6" HD screen included C‑Mount 0.37x adapter supplied Exceptional detail for reliable measurement and documentation The imaging unit delivers 6 MP capture resolution (3264 x 1836) on a Sony CMOS 1/2.8" sensor, combining a compact sensor size with a pixel size of 2.8 x 2.8 µm to preserve fine detail. Progressive scan technology and a frame rate of 30–60 fps in live view (mode-dependent) reduce motion artefacts and make measurements and inspections more reliable. This level of clarity supports traceable visual checks and high-contrast documentation where distinguishing small features is essential, turning visual data into actionable information for quality control procedures. Smooth digital workflows and versatile connectivity Equipped with both HDMI and USB 2.0 outputs, the unit integrates easily into existing capture and display chains; live monitoring at 1920 x 1080 and separate high-resolution capture ensure flexible operation for reporting or analysis. The camera ships with ImageFocus Plus software and an included 16 GB SD card (expandable to 32 GB), enabling image capture, basic measurement tasks and file management without immediate PC dependence. Compatibility with Windows 10, Windows 11 and Mac OS allows straightforward connection to laboratory systems, and the supplied C‑Mount 0.37x adapter and additional mechanical adapters facilitate mounting on a wide range of microscope tubes and inspection stands. Practical design and accessories for dependable day-to-day use Operational convenience is built in: automatic and manual exposure and white-balance settings support varied lighting conditions, while progressive scan capture improves image stability. The package includes a calibration slide (10 mm/100) for verification of measurement scales and adapters (30.0 mm and 30.5 mm to 23.2 mm) for mechanical compatibility. The system runs from 100–240 Vac to 12 Vdc/2 A, operates within 0–60°C ambient temperature and tolerates relative humidity of 45–85%, making it suitable for typical laboratory and shop-floor environments. With a measured sound level of 55 dB in operation and a sensitivity rating of 510 mV/lux-sec, the device balances performance with practical deployment needs. Contact Metav Werkzeuge for tailored advice on integrating the Euromex HD-Ultra imaging system into the inspection workflow and to discuss compatible stands and measurement set-ups Technical Data Article number: VC.3036-HDS Manufacturer: Euromex Model series: HD-Ultra Product type: Microscope camera with screen Core specifications Capture resolution: 3264 x 1836 (capture mode) Live view resolution: 1920 x 1080 (HDTV 1080p) Sensor: Sony CMOS 1/2.8" Pixel size: 2.8 x 2.8 µm Frame rate: 30–60 fps (live view, mode-dependent) Storage: SD card 16 GB included, max 32 GB Display: 11.6" HD screen Power supply: 100–240 Vac → 12 Vdc/2 A Operating temperature: 0–60°C Relative humidity: 45–85% Noise level: 55 dB Sensitivity: 510 mV/lux-sec Features and accessories C‑Mount 0.37x adapter included HDMI and USB 2.0 digital outputs ImageFocus Plus software Progressive scan Automatic and manual exposure and white balance Calibration slide 10 mm/100 included Adapters 30.0 mm and 30.5 mm to 23.2 mm included SD card 16 GB included FAQ What capture and live resolutions does the camera provide? The HD-Ultra VC.3036-HDS records captures at 3264 x 1836 pixels and provides a live view at 1920 x 1080 pixels for monitoring and measurement. Is the system compatible with both Windows and Mac? Yes, the camera supports Windows 10, Windows 11 and Mac OS when used with the supplied ImageFocus Plus software or standard video input tools via HDMI/USB. Which connectors are available for integration into existing setups? Digital outputs include HDMI and USB 2.0; the unit also offers a C‑Mount interface with a 0.37x adapter for common microscope tubes. What is included for calibration and storage? A 16 GB SD card and a calibration slide (10 mm/100) are included; the card can be replaced with a capacity up to 32 GB for extended storage. How well does the camera perform under workshop conditions? Designed for practical use, the camera operates from 100–240 Vac (12 Vdc/2 A), functions between 0–60°C and tolerates 45–85% relative humidity, making it suitable for many lab and shop environments. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high-resolution imaging and versatile digital outputs for improved inspection throughput and reliable documentation; order directly via Metav Werkzeuge or consult our specialists for system integration. Euromex HD-Pro VC.3039-HDS — Microscope camera with HDMI & USB-C, 8 MP sensor A Euromex HD-Pro VC.3039-HDS microscope camera with integrated display designed for laboratory inspection, routine quality control and clear documentation of microscopic samples High-resolution 8 MP imaging Dual output HDMI and USB-C Sony CMOS 1/2.8" sensor Included adapters and 32 GB storage Exceptional image quality for clear measurement and documentation The camera unit delivers 8 MP output at 3840 x 2160 pixels using a Sony CMOS 1/2.8" sensor with a pixel pitch of 1.45 x 1.45 µm, which produces finely resolved images suitable for visual inspection and basic metrology tasks. Higher pixel density means greater detail capture on each frame, so surface features, solder joints or material structures become easier to evaluate. The device’s optical arrangement and digital resolution support reproducible captures for reporting and traceable evidence in quality-control records. Reliable live view and convenient file handling for lab workflows Equipped with both HDMI and USB-C digital outputs, the camera provides a live image of 1920 x 1080 for real-time inspection while recording at full sensor resolution when required. Frame rates range from 26–60 fps, depending on mode, enabling smooth motion during sample navigation and fast alignment. On-board storage comes with 32 GB (up to 128 GB) support and the unit is bundled with ImageFocus Alpha software for straightforward capture, annotation and export. The progressive scan with rolling shutter is optimised for stationary samples and standard inspection tasks where clarity and throughput matter. Engineered for dependable use in inspection environments Practical controls such as Exposure automatic/manual and White balance ROI let operators adapt image capture to different materials and lighting without complex setup. The camera supports a broad supply range (100–240 Vac to 12 Vdc/2 A) and is specified for operation between -10 and 50 °C with an ambient humidity range of 30–80%, making it suitable for many laboratory and workshop conditions. Sensitivity of 1.3 V/lux-sec (1/30s) ensures usable images under moderate illumination. Included physical accessories—such as the C-Mount 0.37x adapter and calibration slide—simplify integration with existing microscopes and support basic measurement tasks right out of the box. Contact Metav Werkzeuge today to discuss how the Euromex HD-Pro VC.3039-HDS with its 8 MP imaging and HDMI/USB-C outputs can be integrated into existing inspection workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VC.3039-HDS SKU: VC.3039-HDS Manufacturer: Euromex Model series: HD-Pro Product type: Microscope camera with screen Core specifications Resolution: 8 MP — 3840 x 2160 px Sensor: Sony CMOS 1/2.8" Pixel size: 1.45 x 1.45 µm Frame rate: 26–60 fps (live, mode-dependent) Live image: 1920 x 1080 px Scan: Progressive scan, Rolling Shutter Sensitivity: 1.3 V/lux-sec (1/30s) Operating temperature: -10–50 °C Humidity: 30–80% Noise level: 38 dB Supply voltage: 100–240 Vac to 12 Vdc/2 A Storage: 32 GB included, up to 128 GB Included accessories & features Adapter: C-Mount 0.37x Connections: HDMI, USB-C Exposure: Automatic/Manual White balance: Automatic/Manual/ROI Software: ImageFocus Alpha Live image and recording modes (mode-dependent frame rates) Accessories included: 32 GB memory card; adapters 30.0 and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C-Mount adapter 0.37x FAQ What operating systems are supported for image capture and measurement? The camera supports Windows 10, Windows 11 and Mac OS for image acquisition and basic measurement workflows; Euromex’s HD-Pro VC.3039-HDS integrates with the ImageFocus Alpha software supplied with the unit. Which digital outputs are available for live inspection and recording? The unit offers both HDMI and USB-C outputs for high-quality live display and direct connection to capture devices; the HDMI output provides a live 1920 x 1080 image, while recordings can use the full 3840 x 2160 sensor resolution on the Euromex camera. Can storage be expanded beyond the supplied card? Yes — the camera ships with a 32 GB memory card and supports expansion up to 128 GB, allowing extended recording and archiving of inspection images on the Euromex HD-Pro VC.3039-HDS. Is the camera calibrated for measurement tasks out of the box? A calibration slide (10 mm/100) is included with the delivery, enabling scale calibration and basic measurement setup directly with the Euromex HD-Pro VC.3039-HDS and the supplied software. How does the camera handle different lighting conditions and materials? Adjustable exposure modes and a selectable white-balance including ROI enable optimisation for reflective, matte or composite surfaces; the specified sensitivity helps maintain image quality under typical laboratory illumination when using the Euromex camera. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of high-resolution capture, direct digital outputs and a ready-to-fit adapter kit for reliable imaging workflows; order the HD-Pro VC.3039 directly via Metav Werkzeuge or consult the Metav team for integration advice. HD-Pro VC.3039 microscope camera — 8 MP imaging with HDMI and USB-C outputs The HD-Pro VC.3039 is a compact microscope camera designed for clear digital capture and straightforward integration into inspection and measurement setups. 8 MP sensor for detailed captures Digital output via HDMI and USB-C C-Mount 0.37x adapter included Includes ImageFocus Alpha software Live view up to 60 fps (mode dependent) Precision imaging for measurement and inspection The core benefit of this imaging system is its ability to produce highly detailed stills at 8 MP (capture resolution 3840 x 2160) using a Sony CMOS 1/2.8 inch sensor with a 1.45 µm pixel size. This combination yields images with sufficient detail for visual inspection and basic metrology when used with the supplied calibration slide. The sensor’s characteristics, together with the progressive scan mode, minimise artefacts from movement and support accurate image analysis. As a result, the camera provides a dependable visual basis for quality control, documentation and routine laboratory work. Fast, flexible connectivity to speed up workflows Thanks to dual digital outputs — HDMI and USB-C — the camera can be assigned either to a direct-monitor setup for immediate visual checks or to a workstation for capture and processing. The live image defaults to 1920 x 1080 for smooth on-screen review while the capture resolution remains at 3840 x 2160, and frame rates of 26–60 fps (live, mode dependent) ensure fluid previewing. Power is managed via a universal input (100–240 Vac) down to 12 Vdc/2 A, which helps integrate the camera into diverse bench environments. These connectivity options reduce setup time and create a more efficient inspection loop. Complete integration kit to simplify installation The delivery package contains practical integration aids that reduce sourcing time and increase first-run readiness: a 32 GB SD card (expandable to 128 GB), calibration slide (10 mm/100), and adapters for 30.0 and 30.5 mm to 23.2 mm plus a C-Mount 0.37x adapter. Combined with the bundled ImageFocus Alpha software, the camera arrives ready to support measurement routines and image capture without extra tooling. This preconfigured kit lowers the barrier to productive use and shortens commissioning time in small laboratories and teaching environments. Stable performance under typical workshop conditions Designed to operate across a wide ambient range, the camera tolerates temperatures from -10°C to 50°C and humidity between 30% and 80%, while offering manual and automatic controls for exposure and white balance (including ROI). The sensor sensitivity of 1.3 V/lux-sec (1/30s) assists in capturing usable images under varied illumination, and the progressive scanning method helps deliver steady frames for analysis. These attributes support consistent results in both controlled and more variable workbench conditions. For tailored advice on integrating the HD-Pro VC.3039 into existing microscopy or inspection setups, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will advise on compatibility, optional accessories and calibration workflows. Technical data Article number: VC.3039 SKU / Label: VC.3039 / HD-Pro VC.3039 Manufacturer: Euromex Product type: microscope camera Model series: HD-Pro Facts Resolution (capture): 8 MP — 3840 x 2160 pixels Live image: 1920 x 1080 pixels Sensor: Sony CMOS 1/2.8 inch Pixel size: 1.45 x 1.45 µm Frame rate (live): 26–60 fps (mode dependent) Scan type: Progressive scan, Rolling shutter Sensitivity: 1.3 V/lux-sec (1/30s) SD storage: 32 GB included — up to 128 GB supported Operating temperature: -10 to 50°C Humidity range: 30–80% Power supply: 100–240 Vac to 12 Vdc / 2 A Noise level: 38 dB Special features Adapter: C-Mount 0.37x included Outputs: Digital HDMI and USB-C Exposure modes: Automatic / Manual White balance: Automatic / Manual / ROI Software: ImageFocus Alpha included Accessories included: 32 GB SD card; adapters 30.0 and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C-Mount adapter 0.37x Compatibility: Windows 10, Windows 11, Mac OS FAQ What maximum still resolution does the camera provide? The HD-Pro VC.3039 records still images at 3840 x 2160 (8 MP), providing detailed captures suitable for inspection and documentation. Which outputs are available for live viewing and recording? The device offers both HDMI and USB-C digital outputs for direct monitor connection or attachment to a workstation for capture and processing. Is software included for image capture and measurement? Yes — ImageFocus Alpha is supplied with the camera and supports capture, basic measurement tools and image management for standard inspection tasks. Are adapters and calibration tools supplied for measurement work? The package includes a C-Mount 0.37x adapter, two eyepiece adapters and a calibration slide (10 mm/100), enabling faster setup for measurement routines with the HD-Pro VC.3039. Which operating systems are supported for PC connection? The camera supports Windows 10, Windows 11 and Mac OS, allowing integration with common laboratory and office platforms. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high‑definition imaging solution that combines autofocus, Sony sensor quality and flexible digital outputs for fast integration into lab workflows — order directly via Metav Werkzeuge or request expert advice from our consultants. Euromex VC.3034 microscope camera — HD autofocus with HDMI, USB and WiFi The Euromex VC.3034 is a compact HD autofocus microscope camera designed for quality control, teaching and laboratory documentation where clear 1080p capture and easy connectivity are required. HD autofocus camera for microscopy Sony sensor, 1920x1080 capture mode HDMI, USB and WiFi digital output Includes 0.5x C‑mount and adapters High‑definition imaging for reliable documentation The VC.3034 delivers a 1920x1080 capture mode from a 2 MP image sensor, which ensures detailed stills and smooth Full HD video suitable for reports and presentations. The built‑in autofocus significantly reduces setup time when switching specimens or magnifications, while the native 1/1.9" sensor format and Sony imaging technology provide consistent colour fidelity and a practical compromise between field of view and resolution. For users less familiar with sensor specs: Full HD means footage and images are immediately usable for standard screens and most analysis workflows without upscaling. Flexible output and accessories for faster workflows Workflows benefit from the camera’s multiple digital outputs — HDMI for direct monitor display, USB for capture to PC and WiFi for wireless streaming or remote control. Supplied accessories such as a 0.5x C‑Mount lens, 30 mm and 30.5 mm adapters for stereo microscopes, a High Speed 32GB SD‑card, a WiFi dongle, an HDMI cable and a USB mouse make the unit production‑ready on delivery. The integrated power option (100–240 Vac to 12 Vdc/2 A) and included cables reduce the number of additional purchases and enable quick installation at the bench. Robust scanning performance and suitable operating range The camera employs progressive scan with a rolling shutter to balance motion handling and sensitivity; the rated sensitivity of 1.12 V/lux‑sec (1/30 s) allows usable imaging under typical microscopy illumination. Environmental tolerances (−10 to 40 °C, 45–85% relative humidity) match standard laboratory and classroom conditions, and an acoustic rating of roughly 50 dB reflects low operating noise for comfortable use. A 76x24 mm calibration slide (1 mm/100) included with the unit supports quick verification of scale and measurement accuracy, aiding reproducible documentation in quality assurance and education settings. Discuss system integration and delivery options for the Euromex VC.3034 with Metav Werkzeuge — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and reliable supply Technical data Article number: VC.3034 SKU: VC.3034 Manufacturer: Euromex Product type: Microscope camera Model series: HD Facts Resolution: 2 MP Capture: 1920x1080 (capture mode) Format: 1/1.9", HDTV 1080p Dimensions: 81 x 65 x 78 mm Operating temperature: −10 to 40 °C Humidity: 45–85% Sensitivity: 1.12 V/lux‑sec (1/30 s) Power: 100–240 Vac to 12 Vdc/2 A Noise level: 50 dB Scan: Progressive scan, Rolling Shutter Colour depth: 24 bits Exposure: Automatic / Manual White balance: Automatic / Manual Special features Sony sensor HD‑Autofocus type C‑Mount interface Digital outputs: HDMI and WiFi Data output: Digital HDMI and WiFi Magnification: 0.5x Accessories included: 30 mm and 30.5 mm adapters for stereo microscopes, 0.5x objective with C‑Mount, High Speed 32GB SD‑card, WiFi‑dongle, 12 V/1 A power adapter, HDMI cable, USB mouse, 76x24 mm calibration slide (1 mm/100) Capture mode: C‑Mount Label: Mikroskopkamera VC.3034 FAQ Is the camera compatible with stereo microscopes? The VC.3034 is supplied with 30 mm and 30.5 mm adapters for stereo microscopes, enabling direct attachment and straightforward optical coupling. Can the unit record and stream Full HD video? Yes — the VC.3034 supports 1920x1080 capture with progressive scan and can output via HDMI for local monitoring or via WiFi for streaming. How does autofocus improve routine use? Autofocus in the VC.3034 shortens setup time when changing specimens or magnifications and helps maintain sharp documentation during teaching demonstrations or inspection tasks. Which outputs are available for integration into existing setups? The camera provides HDMI for direct displays, USB connections for capture to PCs and a WiFi option (WiFi dongle included) for wireless workflows. What calibration and storage options are provided with delivery? Delivery includes a 76x24 mm calibration slide (1 mm/100) for scale verification and a High Speed 32GB SD‑card for immediate local recording. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the integrated Autofocus and the 11.6" HD screen for efficient, repeatable documentation; the built-in HDMI, USB and WiFi outputs simplify image transfer and archival. Order the microscope camera directly via Metav Werkzeuge or request technical advice for system integration. Microscope camera with screen VC.3034-HDS — Euromex HD autofocus inspection camera with 11.6" display The Microscope camera with screen VC.3034-HDS is an all‑in‑one HD autofocus inspection camera designed for laboratory, education and industrial microscopy applications, offering direct HDMI, USB and wireless outputs for fast documentation 11.6" HD screen, 1920x1080 capture Sony 2 MP sensor, 1/1.9" format Built-in autofocus for sharp imaging HDMI, USB and WiFi digital output Consistent image quality for reliable measurement and documentation The unit is built around a Sony sensor with 2 MP effective resolution and 1920x1080 capture capability, delivering stable, high‑definition images for inspection and record keeping. The combination of Autofocus and selectable automatic or manual exposure reduces setup time and minimises operator variability, which is crucial when consistent image sharpness is required across multiple samples. The camera’s progressive scan capture and selectable rolling shutter modes are explained simply: progressive scan reads the entire frame at once for cleaner stills, while rolling shutter reads line by line and can be beneficial for specific lighting or motion scenarios. Integration and workflow efficiency through flexible connectivity Equipped with HDMI, USB and WiFi digital outputs, the system connects directly to displays, computers or networks for immediate viewing and sharing. The C‑Mount interface and supplied 0.5x objective make adaptation to existing stereo microscopes straightforward; the camera accepts C‑Mount optics for flexible magnification control. Onboard support for a 32GB SD card enables local capture without a PC, and included cables and a WiFi dongle reduce the list of additional purchases, enabling faster deployment in routine inspection environments. Ready to use: adapters and calibration included for traceable results Delivered with 30 mm and 30.5 mm adapters for stereo microscopes, a 0.5x C‑Mount objective, an HDMI cable and a 76×24 mm calibration slide (1 mm/100), the VC.3034‑HDS arrives configured for immediate measurement and imaging tasks. The calibration slide supports simple verification of scale and measurement accuracy, which saves time during setup and ensures traceability for documentation. Practical accessories mean fewer interruptions and a quicker route from unpacking to productive use. Durable operation under typical laboratory conditions Designed for routine use, the camera performs across a broad environmental range (operating temperature −10 to 40 °C, relative humidity 45–85%) and operates at a modest acoustic level of 50 dB. Power flexibility via 100–240 Vac to 12 Vdc/2 A supply supports international installations and bench arrangements. The combination of robust environmental tolerance and integrated display reduces the need for additional peripherals, supporting sustained inspection workflows with dependable performance. The Euromex HD series construction emphasises repeatable imaging for quality control and teaching environments. Contact Metav Werkzeuge for a tailored technical quote or system configuration for the Euromex VC.3034-HDS and arrange prompt delivery from Emmerich. Technical data Article number: VC.3034-HDS SKU: VC.3034-HDS Brand: Euromex Product type: Microscope camera with screen Model series: HD Type: HD-Autofocus Facts Resolution (megapixel): 2 MP Capture resolution: 1920×1080 (capture mode) Sensor format: 1/1.9" Screen: 11.6" Colour depth: 24 bits Sensitivity: 1.12 V/lux‑sec (1/30 s) Capture mode: Progressive scan, Rolling Shutter Operating temperature: −10 to 40 °C Relative humidity: 45–85% Noise level: 50 dB Supply voltage: 100–240 Vac to 12 Vdc/2 A Magnification: 0.5x Special features Autofocus C‑Mount interface Digital outputs: HDMI, USB, WiFi Exposure: Automatic / Manual White balance: Automatic / Manual Included adapters: 30 mm and 30.5 mm for stereo microscopes Included optics: 0.5x objective with C‑Mount Accessories: High Speed 32GB SD card, WiFi dongle, HDMI cable, USB mouse Calibration slide: 76×24 mm (1 mm/100) Display: HD Screen 11.6" FAQ What outputs are available for live viewing and capture? The Euromex microscope camera VC.3034‑HDS provides HDMI, USB and WiFi outputs for live viewing, recording to a connected PC or saving directly to the supplied 32GB SD card. Is the camera compatible with existing stereo microscopes? Yes, the VC.3034‑HDS includes 30 mm and 30.5 mm adapters and a 0.5x C‑Mount objective, enabling straightforward mounting to most stereo microscopes that accept standard eyepiece tube adapters. Can the system be used for basic metrology tasks? Delivered with a 76×24 mm calibration slide (1 mm/100), the VC.3034‑HDS supports quick verification of image scale and measurement traceability for routine inspection and documentation work. How does autofocus perform with different specimens? The built‑in Autofocus of the VC.3034‑HDS maintains sharp images across variable sample heights and textures; for delicate control the camera also offers manual focus and manual exposure settings. What environmental conditions does the camera tolerate for continuous use? The device operates reliably between −10 and 40 °C with relative humidity of 45–85%, making it suitable for standard laboratory and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of UHD‑4K capture, an integrated 11.6-inch HD screen and a complete accessory kit for efficient inspection and documentation; order the HD colour camera directly via (Metav Werkzeuge) or ask our consultants if needed. HD colour camera with HDMI and USB ports (Euromex VC.3042-HDS) — UHD‑4K, Sony 4K sensor The HD colour camera with HDMI and USB ports is a compact UHD imaging system designed for inspection, documentation and integration with stereo microscopes in industrial and laboratory settings. UHD 4K sensor, 3840×2160 capture Built‑in 11.6‑inch HD screen for live review HDMI and USB‑2 digital outputs for easy integration Complete kit: adapters, 12V supply, HDMI, 16GB SD Sharper inspections with true UHD‑4K capture Equipped with a Sony 4K sensor and native 3840×2160 capture, the unit delivers higher spatial detail than standard HD imagers. The UHD‑4K performance, combined with Progressive scan capture, reduces motion blur during fast inspection tasks and enables reliable visual checks that shorten fault finding and rework cycles. The camera’s sensitivity (505 mV/lux‑sec) improves low‑light performance, so fine features can be recorded with fewer illumination adjustments, increasing throughput in repetitive measurement or quality‑control workflows. Plug‑and‑play monitoring to speed up workflow An integrated 11.6‑inch HD screen gives immediate visual feedback next to the workstation while HDMI and USB‑2 outputs make connection to external displays, capture cards or PCs straightforward. The camera supports Windows 10 and 11 as well as Mac OS, and is powered by a universal supply (100–240 Vac to 12Vdc/1A), so setup is fast across different laboratory and workshop environments. Included accessories such as HDMI cable, USB mouse and a 16GB SD card ensure the system is operational from delivery, reducing installation time and supplier coordination. Calibrated images for measurement and documentation Colour‑critical tasks benefit from the camera’s 36‑bit colour reproduction and flexible white balance modes (Automatic, Manual and ROI), which help to maintain consistency across sessions. The supplied 76×24 mm calibration slide (1 mm/100) supports simple calibration routines for imaging chains used in metrology or documentation. With a 0.5× magnification adapter and C‑mount interface, the device adapts to a range of optical set‑ups and preserves measurement reliability where traceable scaling is required. Robust design for workshop and lab conditions The camera operates across a wide environmental range (−10 to 50 °C, 30–80% relative humidity) and offers a noise level of approximately 40.5 dB during operation, supporting continuous use in production areas and controlled labs. The progressive scan with rolling shutter is suitable for detailed sample capture and inspection under most lighting conditions, and the combination of exposure control (automatic/manual) and ROI white balance ensures reproducible imaging for documentation and reporting. A complete kit that reduces procurement complexity Delivered with microscope adapters (30 mm and 30.5 mm) for stereo microscopes, a 12V71A power adapter, Wi‑Fi dongle, USB‑2 cable (plug‑to‑plug) and an instruction manual, the package minimises the number of additional purchases required to get the system online. The inclusion of both HDMI and USB outputs alongside a built‑in screen allows flexible use as a stand‑alone inspection station or as part of a larger imaging network, simplifying integration into existing test benches and documentation processes. For tailored technical advice on the Euromex HD colour camera VC.3042-HDS and to discuss configuration options for inspection or microscopy workflows, contact Metav Werkzeuge for expert guidance and ordering assistance. Technical data Article number: VC.3042-HDS Brand: Euromex Product: HD colour camera with HDMI and USB ports Facts Resolution (capture): 3840×2160 Megapixels: 8.3 MP Sensor: Sony 4K Display: 11.6‑inch HD screen Sensitivity: 505 mV/lux‑sec Noise level: 40.5 dB Operating temperature: −10 to 50 °C Relative humidity: 30–80% Magnification: 0.5× Power supply: 100–240 Vac → 12 Vdc / 1 A Format: 1/1.8", HDTV 1080p Colour depth: 36 bits Capture mode: Progressive scan, Rolling shutter Accessories & special features C‑mount Digital outputs: HDMI and USB‑2 Exposure: Automatic / Manual White balance: Automatic / Manual / ROI Compatibility: Windows 10, 11, Mac OS Included: 30 mm and 30.5 mm microscope adapters Included: 12V71A power adapter, HDMI cable, USB mouse Included: 16GB SD card, Wi‑Fi dongle, USB‑2 plug‑to‑plug cable Included: 76×24 mm calibration slide (1 mm/100), 11.6‑inch screen, instruction manual FAQ What image resolution does the camera record? The camera records at 3840×2160 in capture mode, leveraging the Sony 4K sensor for UHD‑4K detail suitable for inspection and documentation. Can the camera be used with a stereo microscope? Yes, the package includes 30 mm and 30.5 mm adapters for mounting to most stereo microscopes and the camera’s C‑mount interface supports standard optical attachment. Which outputs are available for live viewing or capture? Live monitoring and capture are possible via the built‑in 11.6‑inch screen, HDMI and USB‑2 digital outputs; the included HDMI cable and USB connections facilitate immediate integration. Is the camera suitable for low‑light inspection tasks? With a sensitivity of 505 mV/lux‑sec and adjustable exposure modes, the camera provides improved low‑light performance for many inspection scenarios. Does the system include calibration tools for measurement tasks? Yes, the delivery contains a 76×24 mm calibration slide (1 mm/100) to support straightforward calibration of the imaging chain for measurement documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the simple contrast control and standard sizing of these stage plates to improve specimen visibility and routine workflow; the pair of black/white plates and their Ø 90 mm diameter provide flexible backgrounds for a range of samples. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Pair of stage plates (black/white), Ø 90 mm by Euromex — microscope stage plates for stereo microscopes The Pair of stage plates (black/white), Ø 90 mm is designed as a practical contrast solution for stereo microscopes, offering immediate background selection for opaque or translucent specimens. Black and white contrast plates Ø 90 mm for standard stages Pair for quick background switching Improved contrast for reliable inspection results The pair of stage plates delivers a straightforward way to control background contrast during routine inspection. The black surface helps to emphasise light-coloured, translucent samples, while the white side provides a neutral background for darker specimens. This contrast selection reduces the time spent adjusting illumination and visual filters, thereby increasing throughput in inspection tasks. The plates’ role is purely optical, so they complement existing illumination setups without altering microscope calibration. Simple compatibility with standard stereo microscope stages With a defined diameter of Ø 90 mm, these plates are intended for microscopes and stages that accept 90 mm inserts. The standard sizing simplifies integration into common stereo microscope workflows and ensures a snug fit in compatible stage openings. Because the product is a pair, it allows rapid switching between backgrounds during sample preparation or comparison tasks, supporting efficient step-by-step processes in laboratory or workshop environments. Practical guidance and procurement support For users uncertain about fit or suitability, the plates are a low-complexity accessory that typically requires no modification to the stage; they serve as an immediate contrast option for both novice and experienced operators. When additional technical details or compatibility checks are needed, Metav Werkzeuge provides assistance and can confirm whether the Euromex set matches specific stage systems. For further questions, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice. For reliable contrast solutions from Euromex, contact Metav Werkzeuge for expert advice and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9956 SKU: NZ.9956 Manufacturer: Euromex Product type: Microscope stage plates Facts Diameter: 90 mm Special features Pair of plates in black and white For stereo microscopes / stage inserts Provides background contrast for opaque and translucent specimens FAQ Are these plates suitable for stereo microscopes? The Euromex pair of stage plates is intended for use with stereo microscopes and fits stage openings compatible with a 90 mm diameter insert. How does the black/white pair improve inspection? Using the black and white sides of the plates enhances specimen contrast; the black side highlights light or translucent samples while the white side offers a neutral background for darker subjects when using the Euromex stage plates. Is any modification required to fit the plates? No modification is typically necessary; the Euromex plates are designed as stage inserts for stages accepting Ø 90 mm plates. Who to contact for confirmation of compatibility? For compatibility checks and procurement, Metav Werkzeuge provides technical advice and order support for the Euromex NZ.9956 stage plates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of precise Abbe illumination, flexible contrast options and straightforward integration into existing systems for dependable microscopy results; order the condenser directly via Metav Werkzeuge or consult our advisors for technical matching. bScope BS.9102 condenser — Abbe 1.25 NA with darkfield & phase slot (Euromex) The bScope BS.9102 condenser is an Abbe-style condenser designed to deliver high-contrast transmitted-light illumination with a 1.25 numerical aperture, featuring a dedicated slot for darkfield and phase contrast sliders. Abbe condenser with 1.25 numerical aperture Slot for darkfield and phase contrast sliders Compatible with bScope series microscopes Precision optical alignment for consistent contrast Optimised illumination for improved detail and contrast The Abbe condenser specification with 1.25 NA provides a solid basis for precise transmitted-light microscopy: a higher numerical aperture enables improved light-gathering and contributes to enhanced resolution and image contrast when paired with suitable objectives. For routine laboratory work and educational settings, the optical design supports repeatable results and clearer differentiation of specimen structures, reducing time spent on illumination adjustment and increasing throughput at the bench. Flexible contrast techniques for a wider range of samples Built with a slot for darkfield and phase contrast sliders, this condenser permits rapid switching between contrast methods without complex reconfiguration. Darkfield illumination is suited to the visualisation of small, unstained particles, while phase contrast emphasises transparent cellular structures. The slider arrangement keeps accessories accessible and changeable on the fly, so different sample types can be examined efficiently without compromising alignment or focus. Robust compatibility and precise alignment for system integration Engineered for integration with the bScope series, the condenser offers reliable compatibility and straightforward mechanical fitting to standard transmitted-light microscopes of the same line. The optical path is configured for consistent optical alignment, which helps maintain uniform illumination across sessions and users. The compact design is suitable for teaching labs, routine inspection benches and light microscopy workflows where stable, repeatable illumination is required. Practical support and further technical resources Technical documentation identifies the unit as an Abbe condenser with a 1.25 NA and slider accommodation for contrast accessories; additional information is available on request for exact mounting and compatibility with specific objectives or illumination setups. For supplementary technical data or guidance on matching the condenser to objectives and methods, Metav Werkzeuge provides direct support and can supply clarifications or copies of the referenced education materials. For a reliable Abbe illumination solution choose the Euromex bScope BS.9102 condenser — contact Metav Werkzeuge in Emmerich for ordering advice or technical matching at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BS.9102 SKU: BS.9102 Model series: bScope Product type: Condenser Manufacturer: Euromex Key numerical data Numerical aperture: 1.25 NA Special features Abbe condenser design Slot for darkfield and phase contrast sliders Compatible with bScope series microscopes Source: Education PDF S.21; Life Science PDF S.9,39 FAQ What numerical aperture does the condenser provide? The Euromex bScope BS.9102 condenser provides an NA of 1.25 NA, which supports higher-resolution transmitted-light imaging and improved contrast with compatible objectives. Can this condenser be used for darkfield and phase contrast techniques? Yes, the condenser includes a dedicated slot for darkfield and phase contrast sliders, allowing rapid switching between these contrast methods. Which microscopes is the condenser compatible with? The condenser is designed for the bScope series and offers mechanical and optical compatibility with microscopes from that range; verify objective and mount compatibility for specific models. How does the Abbe design affect image quality? An Abbe condenser concentrates and directs light to optimise specimen illumination; with the 1.25 NA, it helps to achieve uniform, high-contrast transmitted-light images when matched to appropriate objectives. Where can further technical documentation be obtained? Further documentation and references cited for the condenser are available; consult the education and life science PDFs mentioned in the technical data or request details from Metav Werkzeuge. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the Standard Abbe condenser design and precise optical alignment for consistent illumination, combined with straightforward integration into Achios‑X Observer stands. The result is dependable image quality for routine microscopy; order the condenser directly via Metav Werkzeuge or ask our consultants if needed. Euromex Achios‑X Observer AX.9100 condenser — Standard Abbe condenser for routine microscopy Euromex Achios‑X Observer AX.9100 condenser is a compact standard Abbe condenser engineered for reliable illumination control and compatibility with the Achios‑X Observer series, offering a pragmatic upgrade to existing optical setups. Standard Abbe condenser design Fits Achios‑X Observer series Robust build for routine microscopy Simple integration into optical path Consistent illumination for reliable results The Abbe condenser concept used in this unit provides a well-established approach to concentrate light at the specimen plane, improving contrast and resolution for transmitted‑light techniques. Because the design focuses on controlled illumination rather than complex optics, the condenser delivers reproducible light distribution across routine samples. This makes it particularly suitable for microscopy tasks where dependable, repeatable lighting is more valuable than variable speciality functions. Easy installation and optical alignment Designed to match the Achios‑X Observer family, the condenser allows straightforward mechanical and optical integration into an existing stand. The simple mounting reduces downtime and simplifies optical alignment, so the unit can be brought into service quickly. For workshops and teaching labs that require minimal configuration effort, the practical design translates into faster setup and fewer interruptions to workflow. Practical choice for labs and educational use For laboratories, schools and small analytical facilities seeking a reliable illumination component, this condenser balances precision with pragmatic operation. The unit supports standard transmitted‑light workflows and complements basic to intermediate microscopy tasks without introducing unnecessary complexity. It is a compact, effective optical accessory that focuses on core performance where dependable light control is required. For a pragmatic optical upgrade, choose the Euromex Achios‑X Observer AX.9100 condenser and contact Metav Werkzeuge in Emmerich for technical guidance and swift supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AX.9100 Manufacturer: Euromex Model series: Achios‑X Observer Product type: condenser SKU: AX.9100 Facts No numerical specifications provided Special features Standard Abbe condenser Category: Microscopy accessories · Others · Condensers Label: Condenser Achios‑X Observer AX.9100 FAQ What optical principle does this condenser use? The unit is a Standard Abbe condenser, providing concentrated transmitted light to improve contrast and support routine imaging tasks with the Euromex Achios‑X Observer AX.9100 condenser. Is the condenser compatible with the Achios‑X Observer stands? Yes, compatibility with the Achios‑X Observer series is indicated by the model series designation, allowing straightforward integration into matching Euromex observation stands. Can this condenser be used for teaching and routine lab work? The condenser is designed for routine microscopy and educational environments, offering robust performance and simple alignment that fit classroom and workshop requirements. How does the condenser affect image quality? By concentrating illumination and enabling consistent light distribution, the condenser enhances specimen contrast and supports clearer transmitted‑light observation with everyday samples. Is there any numerical specification available for optical aperture or dimensions? No numerical specifications were provided for aperture or physical dimensions in the available data for the AX.9100 unit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise polarisation control and a compact rotatable stage to improve contrast and repeatability in routine microscopy work; the set’s analyser slider, rotatable stage and lamphouse polariser combine to simplify polarisation studies. Order the kit directly via Metav Werkzeuge or consult the Metav team for application guidance. Microscope Polarisation Kit AE.5158-P — analyser slider, rotatable 100 x 65 mm stage (Euromex) The Microscope Polarisation Kit AE.5158-P is a polarisation accessory for transmitted-light microscopes, designed to add controlled polarisation contrast for educational and routine laboratory applications Analyser in slider for quick insertion Rotatable stage 100 x 65 mm for sample orientation Two clamps for secure specimen holding 360° rotatable polarisation filter for lamphouse Enhance contrast with controlled polarisation The kit provides an analyser in a slider and a 360° rotatable polarisation filter for mounting on the lamphouse, enabling straightforward polarisation contrast without complex optical adjustments. By introducing crossed polarisation and a rotatable polariser, birefringent structures become visible and characterisable; this facilitates clearer identification of crystalline phases, stress patterns and anisotropic materials. The modular design means polarisation can be added or removed quickly, reducing downtime between brightfield and polarised observations. Stable rotation and secure sample handling for reproducible results A compact rotatable stage (100 x 65 mm) with two clamps is included for precise sample alignment and repeatable rotation. The small stage footprint is suitable for standard plain stages and supports consistent angular positioning when examining thin sections, fibres or microstructures. Secure clamping minimises sample drift during rotation, which improves measurement reproducibility and reduces the need for repositioning, saving time in both teaching demonstrations and routine analyses. Seamless integration for teaching and routine laboratory use The components are configured for mounting on a plain stage and the lamphouse, permitting simple retrofitting to many transmitted-light microscopes. The kit suits classroom demonstrations, practical exercises and routine polarisation checks where ease of use and reliability are essential. With simple mechanical attachments rather than complex optical replacements, the set reduces installation effort while delivering the visual benefits of polarisation for material inspection and educational purposes. Contact Metav Werkzeuge for procurement or technical advice on integrating this polarisation kit into existing microscopes and for recommendations tailored to specific applications Technical Data Article number: AE.5158-P SKU: AE.5158-P Product type: Microscope Polarisation Kit Manufacturer: Euromex Facts Rotatable stage size: 100 x 65 mm Polariser rotation: 360° Includes: analyser in slider, 2 clamps Special features Mounting: to plain stage and lamphouse Components: small rotatable stage with clamps Application: polarisation contrast for transmitted-light microscopy Source: Education PDF S. 13,14 FAQ What does the kit include and how is it mounted? The kit includes an analyser in a slider, a small rotatable stage (100 x 65 mm) with two clamps and a 360° rotatable polarisation filter for the lamphouse; the stage mounts on a plain stage and the polariser attaches to the lamphouse. Is the polarisation kit compatible with teaching microscopes? Yes; the AE.5158-P is designed for straightforward retrofit to many transmitted-light microscopes commonly used in teaching and routine laboratories, thanks to its plain-stage mounting and lamphouse polariser. Can the rotatable stage support repeated angular measurements? The rotatable stage and clamps provide stable sample holding and consistent rotation, supporting reproducible angular positioning for comparative observations and demonstrations. Which sample types benefit most from this polarisation set? Anisotropic or birefringent materials such as crystals, fibres, thin sections and stressed polymers show enhanced contrast with the polarisation kit, facilitating characterisation and teaching of optical properties. How does the analyser slider simplify workflow? The analyser in slider format permits rapid insertion and removal of the analyser element, enabling quick switching between brightfield and polarised observations without major optical reconfiguration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust aluminium transport case that protects delicate optics, combined with clear compatibility for the MicroBlue series and straightforward identification via SKU MB.9900. Order the MicroBlue MB.9900 directly through Metav Werkzeuge or consult our specialists for tailored selection advice. MicroBlue MB.9900 — Aluminium microscope transport case by Euromex The MicroBlue MB.9900 is a durable microscope transport case designed to safeguard laboratory and field microscopes during storage and transit. Aluminium transport case Secure storage for microscopes Compatible with MicroBlue series Robust protection in transit Robust protection designed for frequent transit The aluminium shell of this transport case provides a solid barrier against everyday handling and transport stresses, delivering reliable protection for sensitive optical equipment. Constructed for longevity, the hard outer casing reduces the risk of mechanical impact affecting instrument alignment, which preserves precision and reduces downtime. For laboratories and training centres that move instruments between locations, the case offers a durable housing that supports operational continuity and fewer interruptions to workflows. Practical compatibility that supports workshop efficiency Engineered with the MicroBlue range in mind, the case simplifies equipment logistics by keeping the instrument clearly identifiable and grouped with related accessories. Clear labelling via the SKU MB.9900 aids inventory management and reduces searching time in busy environments. The case’s form factor supports safe transport between classroom, site and service locations, helping teams maintain readiness and schedule adherence without complex handling procedures. Trust and clarity for educational and professional environments Offered by a recognised optics supplier, the transport case complements a broader approach to dependable workshop provisioning. The product supports institutional needs for repeatable, traceable handling of microscopes and aligns with procurement priorities that value durability and simple asset management. Should further specification or confirmation be required, technical enquiries are welcome to ensure the case meets the particular demands of educational, clinical or industrial routines. Contact Metav Werkzeuge for fast supply of the MicroBlue MB.9900 and expert advice on fitment and procurement — email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Technical data Article number: MB.9900 SKU: MB.9900 Brand: Euromex Product type: Microscope transport case Model series: MicroBlue Numbers / Core technical data No measurable data provided Designs / Special features Aluminium transport case Intended for microscope transport and storage Category path: Microscopy accessories → Transport cases → Transport cases FAQ Is the case suitable for MicroBlue series microscopes? The MicroBlue MB.9900 is specified for transport and storage of instruments from the MicroBlue series and is identified by SKU MB.9900. Does the specification list internal padding or inserts? Internal fittings are not detailed in the provided specification for the MB.9900; please request further information if a particular internal configuration is required. Can the MB.9900 be used for fieldwork? The MB.9900 is described as a transport case intended to protect microscopes during transit; suitability for specific field conditions should be verified against operational requirements. Is the case manufactured from corrosion-resistant material? The case is described as an aluminium transport case; specific surface treatments or coatings are not listed in the available data. Where can the MB.9900 be sourced for institutional procurement? The MicroBlue MB.9900 is available through Metav Werkzeuge and its distribution channels; please consult product listing or contact the supplier for procurement details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from improved surface contrast and controlled polarisation in reflected‑light inspections, combined with a precise optical fit for iScope polarisation systems. Order the analyser directly via Metav Werkzeuge or consult our advisors for specification support. Euromex IS.9602-R Analyser for Reflected‑Light Illumination — Polarisation Filter for iScope Models The IS.9602-R analyser provides polarisation control for reflected‑light microscopy, designed for use with iScope polarisation models to enhance contrast on opaque surfaces. Polarisation for reflected‑light contrast Compatible with iScope polarisation models Precise optical fit for reliable alignment Improved surface contrast for reflected‑light inspection This analyser brings controlled polarisation to reflected‑light setups, reducing surface glare and enhancing the visibility of microstructural features on opaque samples. In practice, the component acts as an optical element that modifies the polarisation state of the illumination, which can significantly increase the contrast between different phases or coatings on metals, ceramics and layered materials. The result is clearer visual differentiation of surface defects, grain boundaries and finish variations without altering the sample. Seamless integration with iScope polarisation systems Designed specifically for the iScope polarisation range, the analyser offers assured compatibility and straightforward mechanical integration. The unit aligns with the existing illumination train and optical mounts of compatible microscopes, simplifying installation and preserving the instrument’s optical path. This compatibility supports fast setup and stable alignment, which is especially valuable in production environments where consistent precision and repeatability are required for routine inspections. Reliable inspection outcomes for industrial workflows In quality control and materials analysis, reproducible results are essential. The analyser stabilises polarisation conditions in reflected‑light examinations, helping to standardise observations across multiple sessions and operators. This stability supports faster decision‑making in applications such as metallography, electronics inspection and surface‑finish assessment, where enhanced contrast shortens evaluation time and reduces the risk of overlooked defects. The device therefore contributes to more efficient throughput and consistent quality documentation. Specification guidance and technical follow‑up Technical data and detailed fitment information are available on request to ensure the analyser meets specific application needs. For customers requiring integration advice or additional technical parameters, Metav Werkzeuge provides specification support and access to product documentation. Detailed queries about optical alignment, polarisation workflow implementation or suitable sample types can be addressed by the technical team to ensure the chosen configuration matches the inspection task and equipment constraints. Contact Metav Werkzeuge for specification support and order processing of the Euromex IS.9602-R, with expert advice and delivery coordinated from Emmerich. Technical Data Article number: IS.9602-R SKU: IS.9602-R Manufacturer: Euromex Product type: Microscope filter Category: Polarisation Facts Compatibility: iScope polarisation models Special features Analyser for reflected‑light illumination Designed for polarisation contrast For use in microscopy polarisation setups FAQ What does the analyser do in reflected‑light microscopy? The analyser modifies the polarisation of reflected illumination to reduce glare and enhance contrast; the Euromex analyser supports clearer observation of surface structures. Is the analyser compatible with all iScope polarisation models? Compatibility is specified for iScope polarisation models; the analyser is intended to integrate with those systems to preserve optical alignment and function. Which sample types benefit most from this analyser? Opaque materials such as metals, ceramics and coated parts benefit from polarisation control in reflected‑light inspection, improving visibility of microstructural and surface features. Can the analyser be retrofitted into an existing inspection setup? The analyser is designed for integration into compatible polarisation illumination trains; technical fitment guidance is available to verify suitability for existing configurations. Does the analyser change the microscope’s magnification or image scale? The unit modifies the illumination polarisation only and does not affect the objective magnification or image scale when installed correctly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com