40mm Plan Phase Contrast PLPHi S40x/0.65 IOS Objective 0.5mm Working Distance, 0.17mm Cover Glass Corrected - Euromex
Data error — the manufacturer "Euromex" is not listed in the authorised manufacturer directory; as a result, it is not possible to generate the product description or provide any further details about the item in question, as the absence of this manufacturer from the directory indicates that it may not meet the necessary criteria or standards required for inclusion, which could potentially raise concerns about the product's authenticity, compliance, or overall quality, and therefore, additional verification or clarification from the relevant authorities or sources may be required to resolve this issue and ensure accurate information is provided.
40mm Plan Stress-Free PLPOLi 40x/0.60 IOS Transmission Polarisation Objective 0.54mm Working Distance, 0.17mm Cover Glass Corrected - Euromex
Take advantage of the 40x high-resolution magnification and the plan, stress-free optical design for reliable polarisation imaging; the corrected cover-glass specification and short working distance ensure sharp results on thin specimens. Order directly via Metav Werkzeuge or request technical advice from our consultants if further specification data is required. Plan stress-free PLPOLi 40x/0.60 IOS objective for iScope — polarisation, 0.54 mm WD (IS.7940-T) Plan stress-free PLPOLi 40x/0.60 IOS Objective for transmitted-light polarisation on iScope systems, corrected for a 0.17 mm cover glass and engineered for high-detail observation with a 0.54 mm working distance Plan, stress-free optical design 40x magnification for detailed imaging Corrected for 0.17 mm cover glass For iScope transmitted-light polarisation Precision optics for confident polarisation analysis The PLPOLi 40x objective combines a plan, stress-relieved lens design with a numerical aperture of 0.60, delivering a well-corrected flat field that reduces image curvature across the visual plane. This results in consistently sharp, undistorted images at the edges as well as the centre, which is essential for quantitative inspection and documentation. The optical layout minimises residual stress birefringence, so polarisation contrast is preserved and sample artefacts are reduced. Such stability supports reproducible imaging in both routine quality control and research applications. Short working distance and cover-glass correction explained A working distance of 0.54 mm indicates the clearance between the front lens and the specimen when in focus; this enables high numerical aperture performance while keeping the optical path compact. The objective is corrected for a 0.17 mm cover glass, which compensates optical aberrations introduced by standard cover slips and maintains focal accuracy when observing mounted samples. In practice, this means fewer refocusing steps and improved image sharpness for thin sections and mounted preparations, enhancing throughput and measurement reliability. Built for iScope transmitted-light polarisation and easy integration Designed specifically for iScope transmitted-light polarisation systems, the objective ensures mechanical and optical compatibility with the platform. The plan, stress-free construction and polarisation-optimised glass make it well suited to mineralogy, petrography and materials analysis where polarised light reveals internal structure. The compact optical footprint supports standard laboratory workflows and fits easily into multi-objective nosepieces, allowing fast switching between magnifications with minimal alignment effort. For precise work where optical integrity matters, this objective provides a dependable upgrade to a microscopy setup. Discuss polarisation optics and application fit with Metav Werkzeuge — reference IS.7940-T for exact compatibility checks and ordering assistance Technical data Article number: IS.7940-T Product type: microscope objective Manufacturer: Euromex Facts Magnification: 40x Numerical aperture: 0.60 Working distance: 0.54 mm Cover glass correction: 0.17 mm Special features Plan, stress-free optics Polarisation for transmitted-light microscopy Compatible with iScope systems SKU: IS.7940-T FAQ What makes a plan, stress-free objective different from a standard lens? A plan, stress-free objective is designed to deliver a flat field across the image and to minimise internal stress birefringence; the Plan stress-free PLPOLi 40x/0.60 IOS objective (IS.7940-T) preserves polarisation contrast and reduces artefacts for clearer transmitted-light imaging. Is this objective suitable for polarised-light mineralogy and materials analysis? Yes, the PLPOLi 40x objective is optimised for transmitted-light polarisation, making it suitable for mineralogical thin sections and materials diagnosis where polarisation reveals structural details. How does the 0.17 mm cover-glass correction affect everyday use? Correction for a 0.17 mm cover glass compensates optical shifts caused by standard cover slips, maintaining focus and image quality on mounted specimens without repeated optical adjustments. Will the working distance of 0.54 mm limit sample sizes or manipulations? A 0.54 mm working distance is typical for high-NA, high-magnification objectives and allows fine control for thin or mounted samples; bulkier specimens requiring larger clearance will need lower-magnification objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm S40x/0.75 Objective 40x, 1.35 mm Working Distance, NA 0.75 - Euromex
Take advantage of the combination of 40x magnification, a high numerical aperture (0.75) and a compact working distance (1.35 mm) for sharp, high-resolution imaging in demanding laboratory applications. Order the objective directly via Metav Werkzeuge or consult our specialists for suitability and integration. Achios‑X Observer AX.7340 microscope objective by Euromex — 40x, NA 0.75 The Achios‑X Observer AX.7340 is a precision microscope objective designed for high-magnification imaging and demanding sample observation in laboratory environments. 40x magnification, high detail resolution Numerical aperture 0.75 for improved contrast Working distance 1.35 mm for close-sample imaging S40x/0.75 PL-SAFi optical specification Exceptional resolution for critical inspection and research The combination of 40x magnification and a numerical aperture of 0.75 delivers increased resolving power and light-gathering capability compared with lower-NA objectives. This optical performance helps to reveal fine structural detail in stained sections or intricate microstructures while maintaining good image contrast. The designation S40x/0.75 PL-SAFi indicates the optical correction and specification used during design and quality control, ensuring consistent image flatness and minimal aberration across the field of view. For laboratories requiring dependable high-magnification observation, these parameters translate directly into clearer, more reproducible imaging results. Designed for samples that permit close approach and fine detail work A working distance of 1.35 mm indicates the objective is intended for specimens that allow a close proximity of the lens to the sample, such as mounted slides and thin sections. This compact working distance supports high-NA performance by shortening the optical path between the specimen and the front lens element, which is why the combination of 1.35 mm and 0.75 NA suits applications where fine lateral resolution is needed. When planning a setup, ensure that sample mounting and coverslip thickness are compatible with the limited clearance to avoid contact and to preserve both specimen and optics. Trusted optics and supply for consistent laboratory workflows Euromex optical engineering underpins the Achios‑X Observer series, supporting stable performance and repeatable results over time. Sourcing through Metav Werkzeuge provides the practical benefits of organised European distribution, inventory oversight and a quality filter that helps reduce procurement risk. Metav’s positioning as a precision partner for industry and trade—backed by a broad product range and established logistics—supports uninterrupted access to measurement and laboratory equipment. For additional technical clarification on optical correction or integration within a specific microscope turret, the available product documentation summarises the technical values and compliance data. Contact Metav Werkzeuge for an application consultation or to reserve the Euromex Achios‑X Observer AX.7340 for the laboratory; call +49 2822 7131930 or email info@metav-werkzeuge.com for precise compatibility advice and supply options Technical Data Article number: AX.7340 SKU: AX.7340 Manufacturer: Euromex Series: Achios‑X Observer Product type: Microscope objective Facts Magnification: 40x Working distance: 1.35 mm Numerical aperture: 0.75 Special features S40x/0.75 PL-SAFi objective specification For microscopes (objective category) Optimised for high-resolution slide imaging FAQ What magnification and resolution can be expected from this objective? The Achios‑X Observer AX.7340 provides 40x magnification with a 0.75 numerical aperture, offering enhanced resolving power for detailed inspection in microscopy applications. Is the short working distance suitable for my sample type? A working distance of 1.35 mm is well suited to mounted slides and thin specimens; however, thicker preparations or non‑mounted samples may require objectives with greater clearance. Does the AX.7340 require special mounting or coverslip thickness? The AX.7340 is optimised for standard slide-mounted preparations; maintaining the recommended coverslip thickness and careful sample mounting preserves optical performance and prevents contact with the front element. Can this objective be fitted into standard turret systems? The Achios‑X Observer series is manufactured to standard objective dimensions used in many microscopes, enabling turret integration where mechanical fittings and parfocal distances are compatible. What does the PL-SAFi designation mean for image quality? The PL-SAFi notation reflects the objective’s optical correction and specification aimed at reducing field curvature and aberrations, contributing to a flatter field and improved image uniformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Microscope Objective 0.6 mm Working Distance NA 0.85 - Euromex
Take advantage of the 40x magnification and high numerical aperture (0.85) for improved detail and contrast in routine life‑science imaging; the short 0.6 mm working distance makes the objective ideal for close-focus preparations. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Microscope objective 86.556 — Euromex 40x, NA 0.85 The Microscope objective 86.556 is a 40x objective designed for high‑resolution microscopy applications, offering a large numerical aperture and a short working distance suitable for detailed sample observation 40x magnification for detailed imaging High numerical aperture 0.85 for improved resolution Short 0.6 mm working distance for close-focus samples High numerical aperture for clearer, higher‑contrast images A numerical aperture of 0.85 noticeably increases the objective's ability to gather light and resolve fine detail, which is critical when analysing cellular structures or fine surface features. In practical terms, the elevated NA translates into sharper images and better contrast under moderate illumination, helping to reduce exposure time and improve throughput in repetitive inspection tasks. For laboratories seeking reliable optical performance, this characteristic supports consistent results across routine and advanced examinations. Forty‑times magnification tailored for life‑science observations With a 40x magnification, the objective provides the balance between field of view and detail that many biological and materials investigations require. This level of enlargement is well suited to studies where subcellular features or microstructural details must be inspected without switching frequently between objectives. The optical design preserves image flatness and clarity across the central field, enabling efficient documentation and measurement workflows with standard microscope camera systems. Short working distance: benefits and practical considerations The 0.6 mm working distance indicates that the lens focuses very close to the specimen plane, which offers advantages when working with thin preparations or coverslipped slides where high‑resolution contact is needed. At the same time, the small separation necessitates careful sample handling and precise stage control to avoid collisions. For applications requiring mechanical probes or thicker specimens, assess compatibility with sample holders and consider whether a longer‑WD objective is required; for thin sections and high‑detail inspection, the compact focus depth is a practical asset. Contact Metav Werkzeuge today for tailored advice on integrating the Euromex 86.556 into existing microscope setups and to check compatibility with camera systems and stage configurations Technical data Article number: 86.556 SKU: 86.556 Manufacturer: Euromex Product type: Microscope objective Label: Mikroskopobjektiv 86.556 UID: 86.556 Facts Magnification: 40x Working distance: 0.6 mm Numerical aperture: 0.85 Source: Life Science PDF, p. 39 Special features PLF S40x/0.85 PLFi objective WD 0.6 mm Designed for high‑resolution life‑science microscopy Suitable for close‑focus sample preparations FAQ What does the numerical aperture 0.85 mean for image quality? A higher numerical aperture, as in the Euromex 86.556 objective, increases the lens's light‑gathering power and resolving capability, resulting in finer detail and improved contrast under comparable illumination. How does the 0.6 mm working distance affect sample handling? The 0.6 mm working distance of this objective requires precise stage control and careful specimen preparation, since the lens focuses very close to the cover slip or specimen surface. Is this objective suitable for routine life‑science applications? Yes, the 40x magnification combined with a high numerical aperture makes the lens well suited to many routine life‑science inspections where detailed cellular or microstructural observation is required. Can standard microscope cameras be used with this objective? Standard camera systems designed for transmitted or reflected light microscopy are commonly compatible; check camera sensor size and tube optics to ensure the desired field of view and resolution when paired with this objective. Where can detailed technical specifications be verified? Detailed optical data and official specifications are available in the manufacturer's documentation; the listed values in product literature include magnification 40x, NA 0.85 and WD 0.6 mm Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Microscope Objective 0.65 NA, S40x/0.65 - Euromex
Benefit from the combination of 40x magnification and a numerical aperture of 0.65 for clear, high‑resolution observation in routine laboratory and educational workflows; order the MicroBlue MB.7040 directly via Metav Werkzeuge or request advice from our consultants. MicroBlue MB.7040 — Microscope objective, 40x magnification, NA 0.65 (Euromex) The MicroBlue MB.7040 is a 40x microscope objective designed to deliver enhanced resolution and light-gathering capability for brightfield and general laboratory observation. 40x magnification for detailed observation Numerical aperture 0.65 for improved resolution Part of the MicroBlue objective series Euromex optical quality and consistency Improved detail and resolution for demanding visual tasks With a numerical aperture (NA 0.65), this optical element increases the amount of light collected from the specimen, which directly improves resolution and image contrast. The higher NA reduces diffraction limits, allowing finer structures to be distinguished at 40x magnification. In practical terms, the objective supports clearer visual separation of adjacent features and delivers more reliable images for standard laboratory assessments and teaching demonstrations. The relationship between aperture and resolving power is a fundamental optical principle: larger NA values enable finer detail to be resolved without changing magnification. Reliable imaging in routine laboratory and educational settings Engineered as part of the MicroBlue range, the lens is intended for frequent use in educational laboratories and general microscopy suites where consistent performance matters. The optical specification S40x/0.65 indicates an emphasis on optical performance at medium magnification, balancing field of view, working distance and image clarity. For users with a basic working knowledge of microscopy, the result is a predictable visual outcome that eases specimen analysis and reduces time spent on re‑adjustment during sessions, supporting efficient workflows and steady throughput. Clear technical advantages that support workflow efficiency The combination of 40x magnification and NA 0.65 provides a concrete efficiency advantage: fewer adjustments are required to obtain high‑contrast images, which reduces time per sample and increases laboratory throughput. The objective’s specification is well suited to applications where mid‑level magnification must reveal subcellular or fine morphological detail without the complexity or cost of higher‑power objectives. Because the functional details are explicit in the technical data, selection decisions can be made on an objective, evidence‑based basis and integrated into existing microscope systems with confidence. Contact Metav Werkzeuge in Emmerich for ordering or technical consultation on the Euromex MicroBlue MB.7040 — reach out via info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: MB.7040 SKU: MB.7040 Manufacturer: Euromex Product type: Microscope objective Model series: MicroBlue Core specifications Magnification: 40x Numerical aperture: 0.65 Features / Special characteristics Optical designation: S40x/0.65 objective Category: For microscopes Label: Mikroskopobjektiv MicroBlue MB.7040 FAQ What does the numerical aperture 0.65 mean for image quality? A higher numerical aperture, such as 0.65 on this microscope objective, increases light collection and improves resolution and contrast, enabling finer structural detail to be resolved at 40x magnification. Is the MicroBlue MB.7040 suitable for educational use? Yes. The MicroBlue MB.7040 objective is designed for routine laboratory and educational environments where consistent, reliable mid‑power imaging is required. Which magnification range is appropriate for this objective? The specification indicates 40x magnification; this objective is best used where medium magnification is needed to observe cellular structures and fine morphological details. Can this objective be used on most standard upright microscopes? The MicroBlue MB.7040 is supplied as a standard microscope objective suitable for use with microscopes that accept standard objective fittings; verify compatibility with the instrument’s nosepiece and tube length specification. How does the S40x/0.65 designation affect selection? The S40x/0.65 label describes the optical design and performance at 40x with NA 0.65, which helps in choosing an objective that balances resolution and light throughput for the intended application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Microscope Objective 0.7mm Working Distance NA 0.65 - Euromex
Achieve consistent high‑contrast imaging with a high numerical aperture (NA 0.65) and a compact working distance (0.7 mm); the result is improved resolution and reliable detail capture for demanding life‑science and microscopy applications. Order the objective directly via Metav Werkzeuge or consult our specialists for integration advice. Delphi‑X Observer DX.7740 — 40x microscope objective, high NA 0.65 (Euromex) The Delphi‑X Observer DX.7740 is a microscope objective optimised for life‑science imaging, offering a high‑aperture plan design suited to detailed sample observation in research and industrial laboratories High NA 0.65 for improved resolution Short working distance 0.7 mm for close focus Compatible with Delphi‑X Observer series Precision optics for reliable high‑resolution imaging The optical design centres on a numerical aperture engineered to maximise light collection and contrast, which directly improves image sharpness and resolving power. A high‑aperture plan objective corrects field curvature, producing a flat image plane across the field of view; this reduces the need for frequent refocusing and supports reproducible documentation of microstructures. By prioritising optical performance, the objective enables shorter exposure times and better signal‑to‑noise ratios, helping laboratories to increase throughput without compromising data quality. Close working distance for controlled surface inspection A working distance of 0.7 mm allows close access to specimen surfaces, making the objective particularly suitable for fine detail inspection and manipulation under the microscope. Close working distance demands careful handling and appropriate sample preparation, but it also permits use of immersion media or fine‑scale measurements where depth resolution is critical. The compact clearance benefits applications that require simultaneous imaging and micro‑instrument interaction, such as microdissection or probe‑based metrology, while the optical design maintains contrast despite the reduced separation from the sample. Smooth integration into life‑science imaging workflows Designed for laboratory environments, this plan objective combines high aperture and a machining‑grade finish to support routine research and industrial microscopy. The design supports consistent imaging across sessions and complements modular microscope systems within the Delphi‑X Observer series. For laboratories requiring confirmation of fitment or further technical data, the Metav Werkzeuge team provides detailed compatibility guidance and can supply the appropriate documentation; technical enquiries may be directed to info@metav-werkzeuge.com or +49 2822 7131930 for prompt assistance. Contact Metav Werkzeuge for supply and technical integration of the Euromex Delphi‑X Observer DX.7740; Metav’s specialists in Emmerich provide procurement and application support to ensure a smooth fit into existing microscopy setups Technical data Article number: DX.7740 SKU: DX.7740 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Label: Mikroskopobjektiv Delphi‑X Observer DX.7740 Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.7 mm Special features PLPHi plan objective design Optimised for life‑science imaging Series compatibility: Delphi‑X Observer Category: for microscopes FAQ What imaging improvements does a high numerical aperture provide? A high numerical aperture increases light collection and resolving power; the DX.7740’s NA 0.65 delivers finer detail and better contrast for high‑resolution microscopy tasks. Is this objective suitable for delicate biological samples? Yes, the plan‑type optical correction and high aperture make the objective appropriate for many life‑science applications, though the 0.7 mm working distance requires careful sample handling. Which microscopes is this objective compatible with? The objective is designed for integration within the Delphi‑X Observer series and other microscopes that accept standard objective mounts and dimensions associated with this product class. Are there special handling considerations for the short working distance? Because the working distance is compact, close sample approach is required; this benefits surface‑sensitive tasks but necessitates careful lens and specimen handling to avoid collision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Objective Lens 0.7mm Working Distance NA 0.65, S40x/0.65 PLi - Euromex
Take advantage of the combination of high resolving power and a compact working distance to capture fine detail in thin specimens; order the objective directly via Metav Werkzeuge or consult our technical team for integration support. Delphi‑X Observer DX.7240 microscope objective — 40x magnification, 0.65 numerical aperture (Euromex) The Delphi‑X Observer DX.7240 is a 40x microscope objective designed for life‑science imaging where high resolution and short working distance are required 40x magnification for detailed cellular imaging Numerical aperture 0.65 for enhanced resolution 0.7 mm working distance for thin‑sample applications Part of the Delphi‑X Observer series by Euromex High resolving power for demanding inspections The 40x magnification combined with a 0.65 numerical aperture delivers optical performance tuned for detailed observation of thin biological specimens and fine structural features. A higher numerical aperture increases the objective’s light‑gathering ability and lateral resolution; in practical terms this means sharper contrast and improved clarity when imaging cellular details or microstructures under transmitted or reflected light. The designation S40x/0.65 PLi (source: Life Science PDF) indicates the optical specification used during design and verification, supporting consistent image quality across routine laboratory workflows. What the short working distance means in practice With a 0.7 mm working distance, the objective is optimised for specimens covered by a standard coverslip or for preparations requiring minimal clearance between sample and front lens. This compact clearance enhances numerical aperture utilisation but requires careful focusing and compatible stage clearance. For many life‑science applications, the shorter working distance contributes to improved resolution at the focal plane; however, users should check mechanical compatibility with condenser and stage accessories before installation to avoid collision and to ensure safe handling of delicate samples. Reliable integration and consistent imaging in the lab Belonging to the Delphi‑X Observer series and supplied under the Euromex label, this objective (SKU DX.7240) is intended to fit established microscopy setups that accept standard mounted objectives. The optical specification supports reproducible results in documented workflows, making it suitable for educational laboratories, research benches and routine quality control tasks where repeatability matters. The compact design and specified optical values help laboratories maintain a predictable imaging chain, reducing time spent on setup and calibration. For application advice or to order the Euromex Delphi‑X Observer DX.7240, contact Metav Werkzeuge for procurement and technical guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: DX.7240 SKU: DX.7240 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.7 mm Special features Designation: S40x/0.65 PLi (Life Science PDF) Series: Delphi‑X Observer Category: For microscopes FAQ What resolution improvements can be expected with this objective? The Delphi‑X Observer DX.7240 microscope objective (Euromex, SKU DX.7240) offers improved lateral resolution through its 0.65 numerical aperture, which enhances detail contrast compared with lower‑NA objectives. Is the working distance suitable for coverslip‑mounted samples? Yes. The 0.7 mm working distance is compatible with thin, coverslip‑mounted preparations, though care is required to ensure adequate mechanical clearance on the microscope stage. Can this objective be used for reflected light as well as transmitted light applications? The optical specification (S40x/0.65 PLi) focuses on imaging performance; the DX.7240 can be used in common life‑science illumination setups, with configuration depending on the microscope’s illumination pathway. Does the objective require special alignment or calibration? Standard microscope alignment procedures apply. The Delphi‑X Observer DX.7240 is designed for reproducible results; alignment and condenser matching will optimise performance. Where can technical compatibility be checked before purchase? For integration checks, Metav Werkzeuge can advise on mechanical and optical compatibility; contact details are provided above for tailored guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
445/635 x 320 x 260 mm MacroZoom MZ.5000 Digital Microscope 2 MP 1920 x 1080, HDMI USB - Euromex
Taking advantage of reliable imaging, flexible magnification and comprehensive accessories ensures efficient inspection and documentation workflows; order the MacroZoom MZ.5000 directly via Metav Werkzeuge or consult our technical advisors for integration advice. MacroZoom MZ.5000 — Digital microscope with zoom optics and integrated display by Euromex The MacroZoom MZ.5000 is a digital microscope designed for inspection, quality control and repair work that requires clear live imaging, adaptable magnification and straightforward documentation. 2 MP CMOS sensor, 1920 x 1080 resolution Zoom lens 0.7–5x, up to 70x digital zoom Ring light with 56 LEDs at 5500 K 11.6-inch tiltable display, HDMI and USB Sharp live imaging for confident decisions The system is built around a 2 MP sensor capable of 1920 x 1080 output, paired with a CMOS sensor and a maximum frame rate of 60 fps. This combination produces smooth, high-contrast live images that aid fast visual inspection and reduce interpretive errors. For documentation purposes the native resolution and frame stability make it simple to capture photos and video suitable for reports and traceability. Flexible magnification while keeping the workspace accessible Optical flexibility is provided by a Zoom 0.7–5x objective together with a high-range digital enlargement — up to 70x digital zoom — enabling close inspection of fine features without repeated repositioning. The standard working distance of 105 mm (110 mm with the supplied 0.5x auxiliary lens) keeps hands and tools clear of the optics, permitting comfortable manipulation of components and safer handling during soldering, rework or assembly checks. Neutral, even illumination and a comfortable viewing angle Consistent lighting comes from the Ring light with 56 LEDs rated at 5500 K, which produces a near-daylight colour temperature for faithful colour reproduction and reduced glare. Visual ergonomics are supported by an 11.6-inch display that is tiltable from -5° to 15°, allowing operators to choose a viewing angle that reduces neck strain and improves posture during extended inspections. The unit’s optical and lighting design minimises shadows and enhances surface detail for confident assessment. Easy integration into documentation workflows The unit offers HDMI and USB connectivity for straightforward connection to external displays, recorders or a networked PC. Supplied accessories such as the 32 GB USB memory, HDMI cable, mouse, power supply and the 0.5x lens mean the instrument is ready for immediate use and data capture. Note that achievable image rates depend on operating conditions; nevertheless the system is configured to support rapid capture and efficient archiving of inspection results. Suited to workshop and lab environments with dependable support This digital system delivers the optical clarity and handling advantages required in small-series manufacturing, repair benches and quality-control stations. The compact footprint and robust feature set speed up faultfinding and shorten throughput times while preserving documentation quality. If additional technical details or integration guidance are required, Metav Werkzeuge can provide specifications and consultancy to ensure seamless deployment — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Contact Metav Werkzeuge for a technical consultation on system configuration, immediate availability and delivery from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: MZ.5000 SKU: MZ.5000 Product type: Digital microscope Model series: MacroZoom Label: MacroZoom MZ.5000 Manufacturer: Euromex Facts Camera resolution: 2 MP Pixel resolution: 1920 x 1080 Frame rate: max. 60 fps Weight: 4.6 kg Dimensions: 445/635 x 320 x 260 mm (H x W x D) Working distance: 105 mm; 110 mm with 0.5x auxiliary lens Display: 11.6 inches Stand travel: 225 mm Special features Sensor: CMOS Lens system: Zoom 0.7–5x Digital zoom: up to 70x Illumination: Ring light with 56 LEDs, 5500 K Connectivity: HDMI; USB Accessories included: 32 GB USB memory; Mouse; HDMI cable; Power supply; 0.5x auxiliary lens Display tilt: -5° to 15° Note: Image rates valid under optimal conditions according to the manufacturer FAQ What resolution and frame rate does the MacroZoom MZ.5000 deliver? The MacroZoom MZ.5000 provides a 2 MP output at 1920 x 1080 and can record at up to 60 fps under optimal conditions for smooth live imaging. Can fine details be inspected without moving the sample? Yes, the combination of the Zoom 0.7–5x optical system and up to 70x digital zoom enables detailed inspection while maintaining a consistent working distance. How is even lighting achieved for reflective surfaces? Even, neutral illumination is provided by the ring light with 56 LEDs at 5500 K, which reduces shadows and improves surface contrast for accurate visual assessment. What is included to start capturing images immediately? Delivery includes a 32 GB USB memory, HDMI cable, mouse, power supply and a 0.5x auxiliary lens, enabling immediate capture and basic documentation work. Is the MacroZoom MZ.5000 suitable for workshop use and documentation workflows? Yes; with HDMI and USB connectivity, a tiltable display and ready-to-use accessories, the system is designed for workshop inspection, quality control and repair documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Blue Filter for Lamp Housing, 45mm Diameter - Euromex
Taking advantage of a precise blue filter with a compact 45 mm diameter yields controlled illumination and improved contrast in microscopy applications; order the blue filter IS.9700 directly via Metav Werkzeuge or consult our advisors for compatibility and stock information. Blue filter 45 mm for lamp housing IS.9700 — Euromex microscope filter, 45 mm diameter for lamp housings Blue filter 45 mm for lamp housing IS.9700 is a purpose-made accessory for microscope illumination systems, designed to be fitted into compatible lamp housings to refine light characteristics and support clearer imaging. Blue filter for microscope illumination 45 mm diameter for standard lamp housings Article number IS.9700 by Euromex Improved contrast through targeted illumination The blue filter shifts the spectral composition of the lamp output towards shorter wavelengths, which can enhance visual contrast for certain specimens and reduce dominant warm tones from halogen or LED light sources. For routine inspection and educational microscopy, this results in sharper perceived edges and more distinct colour separation without altering the optical path. The accessory is intended for integration into the lamp assembly rather than the objective or eyepiece, so the effect is applied at the illumination stage and is compatible with standard transmitted and reflected light set-ups. This approach helps to accentuate details in stained samples and surface features while maintaining a simple, passive modification to the lighting. Compact, compatible design for simple integration With a nominal diameter of 45 mm, the filter is sized to suit common lamp housings used in microscopy accessories; the compact format supports quick installation and minimal adjustment of the existing lighting unit. The product is presented as an accessory component for microscope illumination systems and is identified under IS.9700 for ordering and inventory purposes. Due to its straightforward form factor, the filter can be combined with other illumination accessories such as diffusers or polarising elements, enabling modular adaptation of the light source without extensive reconfiguration. The compact design reduces the footprint within the lamp housing while providing a consistent optical effect. Practical considerations for laboratory and workshop use The filter is supplied as a dedicated microscope accessory and listed under the Euromex range, making it suitable for quality-controlled laboratory environments and educational institutions. As a passive optical component, it requires no electrical connection and imposes no maintenance beyond occasional cleaning with appropriate, non-abrasive materials. For procurement and logistical reliability, the item is available through Metav Werkzeuge, where stock levels and delivery options can be checked; the clear article reference IS.9700 ensures correct ordering and reduces the chance of specification errors. When in doubt about compatibility with a particular lamp housing, technical advisors can verify fitment using the lamp aperture and accessory mounting details. For availability and tailored advice on the Euromex blue filter IS.9700, contact Metav Werkzeuge for stock checks and specification guidance at Metav Werkzeuge GmbH. Technical Data Article number: IS.9700 SKU: IS.9700 Manufacturer: Euromex Product type: Microscope filter Label: Blauer Filter 45mm für Lampengehäuse IS.9700 Facts Diameter: 45 mm Image file name: IS.9700.jpg Image file size: 97,751 bytes Special features Blue optical filter For lamp housing applications Microscope illumination accessory Category: Filter (Microscopy accessories) FAQ What is the primary effect of the blue filter on microscopy illumination? The blue filter IS.9700 narrows and shifts the lamp spectrum towards blue wavelengths, which enhances contrast and colour separation for many specimens when fitted into the lamp housing. Will the filter fit any microscope lamp housing? The filter is designed for a 45 mm diameter aperture; compatibility depends on the lamp housing's internal diameter and mounting method, so verify the lamp aperture before ordering IS.9700. How should the filter be cleaned and maintained? Clean the glass surface gently with a lint-free cloth and mild optical cleaner; avoid abrasive materials to preserve the filter coating and optical quality of IS.9700. Is the Euromex filter suitable for both transmitted and reflected light setups? Yes, the filter is an illumination accessory and can be used with both transmitted and reflected lighting systems, provided the lamp housing accepts a 45 mm accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Green Filter For Lamp Housing, 45mm - Euromex
Take advantage of precise colour filtration and simple integration for consistent illumination in inspection and imaging workflows; the combination of reliable spectral control and standard 45 mm sizing ensures repeatable results — order the green filter via Metav Werkzeuge or consult the technical team for compatibility checks. Green Filter 45 mm for Lamp Housing IS.9702 — Green illumination filter, 45 mm diameter, Euromex The Green Filter 45 mm for Lamp Housing IS.9702 is a compact microscope illumination filter intended to modify light output for improved contrast and colour balance in inspection and imaging applications. Accurate colour correction for illumination Compact 45 mm diameter for standard housings Simple insertion for lamp assemblies Compatible with microscope illumination systems Consistent colour and improved contrast for reliable inspection The green filter IS.9702 shifts lamp emission toward the green spectral band to enhance spectral contrast for colour-sensitive tasks. In practice, this results in clearer differentiation of features under transmitted or reflected light, which supports faster decisions in routine inspection. The standard 45 mm diameter ensures compatibility with a wide range of lamp housings used in laboratory and workshop environments, providing a predictable optical effect without the need for additional accessories. Quick integration into existing illumination setups Designed for direct use in lamp housings, the accessory permits simple insertion and can be used in typical microscope illumination chains. Because the component is a dedicated illumination filter, it reduces the need for software post-processing by delivering a more suitable colour balance at source. The reduced setup complexity increases throughput for repetitive tasks and lowers the risk of variation between sessions, making the filter a practical choice for both educational and industrial microscopy applications. Reliable supply and experienced distribution for professional use Procurement through an established supplier provides continuity for production and lab operations. Metav Werkzeuge acts as a quality filter in the supply chain and combines practical logistics with sector expertise, supporting access to precision accessories across Europe. With an extensive portfolio and a history of servicing many workshops, Metav offers dependable availability and product information to support integration into inspection workflows, helping to maintain consistent results. For procurement guidance and availability of the IS.9702 green filter, contact Metav Werkzeuge for expert advice and compatibility checks for existing lamp housings. Technical data Article number: IS.9702 SKU: IS.9702 Product type: Microscope filter Manufacturer: Euromex Label: Grüner Filter 45mm für Lampengehäuse IS.9702 Facts Diameter: 45 mm Image file size: 92,762 bytes Image filename: IS.9702.jpg UID: IS.9702 Special features Green optical filter for lamp housing Intended for microscope illumination Compatible with 45 mm lamp holders FAQ What is the primary function of this filter? The green filter IS.9702 narrows lamp output toward the green band to increase contrast and improve visual separation of colour-dependent details during microscopy inspections. Which lamp housings is the accessory compatible with? The component is intended for lamp housings that accept a 45 mm insert; compatibility with specific assemblies depends on the housing inner diameter and mounting method. Can this filter be used with microscopes for transmitted and reflected light? Yes, the filter is suitable for both transmitted and reflected illumination where a green-dominant spectrum improves feature visibility in microscopy and visual inspection tasks. How should the filter be handled and cleaned? Handle the optical surface with care; clean using a soft, lint-free cloth and suitable optical cleaner. Avoid abrasive materials and excessive pressure on the glass surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Polarisation Filter for Lamphouse, IS.9600 - Euromex
Reliable polarised illumination and a compact 45 mm diameter support improved contrast for birefringent samples in lamphouse setups. Thanks to simple integration with standard lamphouses and consistent optical performance, the filter assists routine microscopy and teaching applications. Order the Polarisation filter iScope IS.9600 directly via Metav Werkzeuge or ask our consultants for tailored advice. Euromex iScope IS.9600 — Polarisation filter, 45 mm for lamphouse A Polarisation filter iScope IS.9600 engineered to enhance contrast in transmitted-light lamphouse illumination for the observation of birefringent and anisotropic specimens. 45 mm diameter for lamphouse Improves contrast for birefringent samples Compatible with iScope lamphouse series Clearer contrast for polarised microscopy A dedicated polarisation filter enhances visibility of structures that alter polarised light, making features in birefringent materials stand out against the background. By introducing controlled polarisation into the illumination path, the accessory increases image contrast without changing the objective optics. The compact 45 mm size is specified for lamphouse integration, so laboratories and teaching facilities benefit from a device that focuses on improving sample contrast while keeping the microscope's optical train unchanged. Easy fitting and reliable compatibility Designed for straightforward placement in the lamphouse, the accessory avoids complex alignment procedures and supports reproducible results during routine use. The item belongs to the iScope series and matches typical lamphouse mounts, enabling quick replacement or addition to existing setups. Installation requires no specialised tooling; once in place, the polariser maintains consistent orientation relative to the condenser and analyser, which is essential for repeatable polarised-light examinations and comparative documentation. Practical handling and application guidance For everyday laboratory work the filter provides dependable optical behaviour with minimal maintenance: gentle cleaning of the glass surfaces and careful handling protect the optical element and preserve its performance. As an optical accessory it is particularly useful in mineralogy, materials science and education where polarised illumination reveals internal stresses, crystallinity and anisotropy. When planning an experiment, consider the lamphouse aperture and condenser configuration to ensure the filter delivers the intended contrast enhancement. For precise polarised imaging with Euromex optics, contact Metav Werkzeuge for supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and compatibility guidance from Emmerich. Technical data Article number: IS.9600 Manufacturer: Euromex Series: iScope Type: Polarisation filter SKU: IS.9600 Application: for lamphouse Diameter: 45 mm Facts Diameter: 45 mm Special features Polarisation accessory for transmitted-light lamphouse Enhances contrast of birefringent and anisotropic samples Category: Polarisation (microscopy accessory) FAQ What is the primary purpose of a polarisation filter? A polarisation filter modifies the illumination to reveal birefringence and anisotropic features; the Euromex Polarisation filter iScope IS.9600 is supplied for lamphouse use to improve contrast in such samples. Will the filter fit existing lamphouses? The accessory is specified as a 45 mm unit for lamphouse integration and is compatible with typical iScope lamphouse fittings, as indicated by the IS.9600 designation. How should the filter be cleaned and cared for? Clean glass surfaces with a lint-free cloth and suitable optical cleaner; the Euromex IS.9600 should be handled by the edges to avoid fingerprints and preserve optical quality. Which applications benefit most from this polariser? Mineralogy, materials analysis and teaching labs gain most from polarised illumination because the IS.9600 highlights internal stresses, crystalline orientations and other anisotropic properties. Is technical advice available for integration into a specific microscope? Technical guidance is available; Metav Werkzeuge can advise on compatibility and installation for the Euromex IS.9600 to ensure correct lamphouse and condenser alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm White Filter For Lamp Housing, Microscope Filter - Euromex
Take advantage of the 45 mm white diffusion element and its compatibility with standard lamp housings to achieve more consistent illumination and fewer retakes in routine microscopy. Order the filter directly via Metav Werkzeuge or consult the Metav team for compatibility details and rapid delivery. Euromex IS.9706 — White 45 mm microscope filter for lamp housings The Euromex IS.9706 is a white diffusion filter designed to produce even illumination in microscope lamp housings and similar lighting assemblies. 45 mm diameter for standard lamp housings Uniform white light diffusion Designed for straightforward installation Consistent illumination for reliable image capture A white diffusion element evens out light output from the lamp housing, reducing hotspots and reflections that can impair image quality. The 45 mm diameter matches common lamp-seat dimensions, so the result is uniform illumination across the field of view. Less variance in light distribution translates into fewer repeated captures and a steadier baseline for image analysis, which supports efficient laboratory routines and dependable documentation. Fits typical microscope lamp housings for quick integration The component is intended specifically for installation into microscope lamp assemblies and analogous housings; its nominal 45 mm size makes it suitable for many standard fittings. As a passive optical accessory, it integrates without electrical modification, offering a straightforward option for retrofitting existing lighting setups. Compatibility with conventional lamp seats simplifies stocking decisions and reduces the need for multiple, specialised spare parts. Improves visual comfort and analytical consistency By producing softer, more evenly distributed light, the white filter reduces glare and eases visual fatigue during prolonged inspections. The diffusion effect enhances contrast uniformity without altering colour balance, which is beneficial for both human observation and digital imaging workflows. This small optical addition can therefore contribute to higher throughput by lowering the incidence of rework due to uneven lighting. Simple handling with practical benefits for workshops and labs The design focuses on practicality: a compact microscope filter that is easy to store and deploy as part of routine maintenance of illumination systems. The unobtrusive white diffuser supports consistent results over repeated sessions and fits into organised spare-part inventories. For teams aiming to standardise lighting across multiple instruments, the filter offers a low-effort measure to harmonise performance between stations. For reliable, uniform illumination in microscopy applications, request the Euromex IS.9706 white filter from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast dispatch. Technical Data Article number: IS.9706 SKU: IS.9706 Manufacturer: Euromex Product type: Microscope filter Data Diameter: 45 mm Image file size: 52329 bytes Special features White diffusion filter For lamp housings Product label: Weißer Filter 45mm für Lampengehäuse IS.9706 Intended application: microscope lamp illumination FAQ What diameter does the filter have? The Euromex IS.9706 is specified with a 45 mm diameter for use in matching lamp housings. What is the intended application of this component? This component is a white diffusion microscope filter intended for use in microscope lamp housings and similar illumination assemblies. Which article number and SKU identify this product? The item is listed as IS.9706 and uses the same value for the SKU. Who manufactures the filter? The filter is produced by Euromex and sold under the designation IS.9706 as a microscope illumination accessory. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Yellow Filter for Lamp Housing, Microscopy Accessory - Euromex
Take advantage of a compact optical solution that combines a yellow filter with a standard 45 mm diameter for consistent lamp-housing compatibility; the result is improved contrast in transmitted-light applications and straightforward integration into existing microscope illumination. Order supply or request compatibility advice via Metav Werkzeuge if required. Euromex IS.9704 yellow 45 mm microscope lamp filter — yellow filter, 45 mm diameter Euromex IS.9704 is a yellow microscope lamp filter designed to fit lamp housings and to modify illumination for clearer, higher-contrast transmitted-light observation. Yellow 45 mm diameter for lamp housings Fits standard microscope lamp holders Manufactured by Euromex optical accessories Enhanced contrast for transmitted-light inspection A dedicated yellow filter provides a simple, effective way to adjust the light spectrum reaching the specimen, improving visual differentiation of features under transmitted light. By selectively attenuating portions of the illumination, the filter increases apparent contrast for many common samples, which can reduce the need for repeated staining or complex image processing. This optical solution delivers a tangible benefit in routine inspection tasks: faster visual assessment with fewer adjustments to the microscope's illumination system. Simple compatibility and quick installation With a nominal diameter of 45 mm, the filter is sized for insertion into compatible lamp housings and holders found on many standard microscope illumination modules. The compact form factor enables a straightforward retrofit without modification of the light source, offering a practical route to upgrade existing setups. Installation and removal require no specialised tools, which helps to keep downtime low and supports continuous operation in busy labs or workshop environments. Reliable accessory for everyday microscopy workflows The filter is intended as a maintenance-friendly accessory for microscopy work where reproducible lighting conditions are important. As a passive optical component it demands minimal care: periodic cleaning of the optical surface preserves image quality and prevents stray reflections. The design supports consistent results across repeated inspections, helping to standardise visual evaluation and to enhance process reliability in quality control or educational settings. Expert supply and advice from a precision partner Metav positions itself as a partner for accessible precision: a central supplier with extensive inventory and practical expertise for laboratory and workshop customers. Benefit from a supplier that combines broad product availability with technical knowledge, supported from a logistics hub in Emmerich. For questions about fitment, compatibility with a particular illumination module, or batch supply for installation across multiple instruments, Metav Werkzeuge can provide targeted advice and procurement support. For compatibility checks or to discuss supply of the Euromex IS.9704 yellow 45 mm microscope lamp filter for specific equipment, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a tailored recommendation and delivery. Technical data Article number: IS.9704 SKU: IS.9704 Manufacturer: Euromex Product type: Microscope filter Label: Gelber Filter 45mm für Lampengehäuse IS.9704 Core specifications Diameter: 45 mm Image file size (product image): 67991 bytes Special features Yellow optical filter For lamp housings (45 mm) Category: Microscope filter Product image available: IS.9704.jpg FAQ What effect does a yellow filter have on transmitted-light microscopy? A yellow filter modifies the illumination spectrum to increase contrast in transmitted-light observations; the Euromex IS.9704 yellow filter is suitable where warmer, higher-contrast lighting improves visual differentiation of sample features. Will the IS.9704 fit my microscope lamp housing? The IS.9704 is specified with a 45 mm diameter for lamp housings; compatibility depends on the lamp-holder design, so verify the holder diameter on the instrument or consult Metav Werkzeuge for confirmation. How should the yellow filter be cleaned and maintained? Clean the optical surface with a lint-free cloth and appropriate optical cleaner; avoid abrasive materials. Regular cleaning keeps the filter performing reliably in routine microscopy workflows. Can the filter be used with LED and halogen illumination? The yellow filter is a passive optical accessory that can be used with common light sources such as LED or halogen lamps, provided the physical holder matches the 45 mm diameter requirement. Is the filter intended for professional laboratory use? Yes. The filter is designed as a practical accessory for microscopy applications where consistent illumination control and improved contrast are desirable; the Euromex IS.9704 supports standard inspection and educational uses. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Yellow Lamp Housing Filter, Microscope Filter - Euromex
Take advantage of a compact 45 mm format combined with reliable yellow spectral filtration to enhance contrast in transmitted-light microscopy; order or request advice easily through Metav Werkzeuge for rapid procurement and technical support. Euromex Yellow Filter for Lamp Housing DX.9704 — 45 mm microscope filter Euromex DX.9704 is a yellow microscope filter designed for insertion into lamp housings to improve contrast and colour balance in brightfield illumination. Yellow spectral filtering for contrast enhancement 45 mm diameter for lamp housings Designed for microscope illumination systems Simple installation and routine upkeep Improve contrast with targeted spectral control A yellow filter alters the lamp spectrum by attenuating shorter wavelengths, which can reduce excessive blue light and help enhance contrast in many transparent or lightly stained specimens. This spectral adjustment supports clearer visual separation of structures without changing objective settings, enabling more consistent observation. The result is a more reliable image rendition under transmitted-light conditions, beneficial in routine inspection and quality-control workflows. Compact 45 mm format for straightforward integration The 45 mm diameter is a decisive specification for compatibility with lamp housings that accept a 45 mm aperture. The compact format simplifies replacement and keeps the illumination path stable, reducing the need for repeated adjustments. Because the component is intended specifically as a lamp housing accessory, fitting it does not require modifications to the illumination assembly; this preserves alignment and repeatability during inspection tasks. Practical benefits for everyday microscopy tasks As a microscope filter, the DX.9704 by Euromex supports improved visual clarity in applications where colour balance and contrast matter, such as routine sample checks and preparatory inspection stages. The filter’s effect is immediate and reversible: it is a non-invasive optical accessory that complements existing lighting rather than altering imaging hardware. This makes it a pragmatic choice for laboratories and workshops seeking straightforward enhancements to image quality. Simple maintenance keeps optical quality consistent Maintenance is kept deliberately simple to preserve optical performance. Regular checks for dust and fingerprints, coupled with gentle cleaning using lens tissue and an appropriate optical cleaner, will maintain transmission characteristics and prevent artefacts. The filter’s role in the illumination path means that modest care extends service life and preserves consistent spectral balance across inspections. For procurement and technical guidance on the Euromex DX.9704 yellow filter, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9704 Brand: Euromex Product type: microscope filter Data Diameter: 45 mm Special features Yellow filter for lamp housing FAQ What is the exact diameter of the filter? The Euromex DX.9704 filter has a diameter of 45 mm and is intended for lamp housings that accept this size. What does a yellow filter achieve in microscopy? A yellow filter reduces shorter wavelengths and helps to enhance contrast and colour balance in transmitted-light observation, improving visual separation of fine features. Will this filter fit my microscope lamp housing? The DX.9704 is designed for lamp housings with a 45 mm aperture; compatibility depends on the lamp housing dimensions rather than the microscope brand. How should the filter be fitted into the lamp housing? The filter is installed directly into the lamp housing aperture; it is designed as an accessory for insertion without modification to the illumination assembly. How can the filter be cleaned and stored? Clean with lens tissue and a suitable optical cleaner; store in a dust-free container when not in use to preserve transmission and prevent surface damage. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
48mm 1.5x Auxiliary Lens for Zoom Stereomicroscopes, 48 mm Working Distance - Euromex
Take advantage of the 1.5x magnification while keeping a consistent 48 mm working distance, ensuring greater detail without compromising specimen access; order or request technical advice via Metav Werkzeuge for a seamless integration into existing zoom microscope setups. SB.8915 — Euromex auxiliary lens 1.5x for zoom stereomicroscopes, 48 mm working distance The SB.8915 is an auxiliary 1.5x lens designed to increase magnification on compatible zoom stereomicroscopes while maintaining a practical 48 mm working distance; it is not suitable for SB.39xx models. 1.5x magnification increase 48 mm working distance retained Fits most zoom stereomicroscopes Not compatible with SB.39xx models Greater detail with a maintained working distance The auxiliary lens offers a 1.5x magnification step that enhances visual detail for inspection and assembly tasks without forcing a closer approach to the specimen. By preserving the 48 mm working distance, the attachment supports continued use of tools and probes beneath the objective, reducing the need for re-fixturing and improving workflow efficiency. This configuration is particularly relevant where extra resolving power is required for inspection or fine manipulation under a stereo setup. Straightforward compatibility for zoom systems Engineered for use with zoom stereomicroscopes, the lens is intended as an optical attachment that integrates with existing zoom optics. Compatibility is focused on zoom model ranges; the accessory is explicitly not compatible with SB.39xx series instruments, so verification of the microscope series is recommended before specification. The design avoids elaborate mechanical adjustments, enabling a quick optical upgrade that keeps the microscope’s zoom functionality available for variable magnification work. Optical performance aligned with practical use While specified data highlights the magnification and working distance, the primary benefit is improved image scale for inspection and documentation tasks. The optical addition increases apparent specimen size without forcing operators into awkward positions, which helps maintain ergonomic handling during longer sessions. For applications where clearer detail at moderate spatial separation is needed—such as electronics inspection, component assembly or biological sample handling—the attachment provides a targeted improvement in observational capability. Metav as a reliable procurement partner Sourcing this accessory through Metav Werkzeuge brings practical advantages beyond the component itself. Metav stands for democratising precision: a combination of accessible pricing and a consistent quality filter at its Emmerich location ensures reliable supply for workshops and industry alike. With a broad product range and long-term market presence, Metav supports inventory consolidation and dependable delivery, reducing procurement complexity for laboratory and production environments. For purchase enquiries or product compatibility checks, contact Metav Werkzeuge for tailored advice and secure procurement of the SB.8915 auxiliary lens while ensuring fit with existing zoom stereomicroscopes. Technical Data Article number: SB.8915 SKU: SB.8915 Manufacturer: Euromex Product type: Microscope auxiliary lens Core data Magnification: 1.5x Working distance: 48 mm Special features For zoom models (zoom stereomicroscopes) Not compatible with SB.39xx Category: Accessories for stereomicroscopes Image file: SB.8915.jpg FAQ Is this lens compatible with all stereomicroscope zoom heads? Compatibility is intended for zoom stereomicroscopes; the SB.8915 is suitable for many zoom models but is explicitly not compatible with the SB.39xx series. What magnification increase does the accessory provide? The SB.8915 provides a 1.5x magnification boost to the existing zoom range, enabling finer inspection without replacing the main objective. Will the working distance be reduced by fitting the lens? The accessory maintains a 48 mm working distance, allowing continued use of tools and probes beneath the objective while gaining magnification. Can the lens be used for assembly and inspection work requiring tool access? Yes, by retaining the 48 mm working distance the lens supports tasks that require manual access and tool manipulation beneath the objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x iScope Microscope Objective 0.13 NA 16.4mm Working Distance - Euromex
Product data error: the manufacturer "Euromex" is not listed among the approved manufacturers provided. A product description cannot be generated until a matching manufacturer from the supplied list is specified, as the system relies on accurate and verified manufacturer details to ensure the integrity and reliability of the product information being generated, which is essential for maintaining consistency and compliance with the established guidelines and standards set forth for the proper categorisation and representation of products within the database, and any discrepancies in manufacturer data must be resolved promptly to avoid further complications or potential errors in the system.
4x MicroBlue Microscope Objective 0.10 NA - Euromex
The combination of 4x magnification and a numerical aperture of 0.10 provides a dependable low-power overview with sufficient resolution for general inspection and teaching tasks; order the lens through Metav Werkzeuge for reliable supply or consult the Metav specialists for suitability and technical advice. Euromex MicroBlue MB.7004 microscope objective — 4x, NA 0.10 The MicroBlue MB.7004 is a low-power microscope objective designed for overview imaging and educational inspection tasks. 4x magnification for overview imaging Numerical aperture 0.10 for consistent imaging MicroBlue series by Euromex, SKU MB.7004 Accurate low-power imaging for rapid inspections The 4x configuration in this objective delivers a broad field of view that supports fast sample navigation and initial assessment. With a numerical aperture of 0.10, the lens balances depth of field and resolving power to reveal essential structure without the need for frequent focus adjustment. For laboratories and classrooms that require consistent baseline imaging, this low-magnification optic provides repeatable results and a clear visual context before switching to higher-power objectives. The combination of wide field and stable focus makes the component suitable for routine overview work and initial sample orientation. Why numerical aperture 0.10 matters for clarity Numerical aperture directly affects both resolution and light-gathering capability. A numerical aperture of 0.10 indicates moderate resolving performance combined with extended depth of field, which is particularly useful at low magnification where sample topography can vary. In practice, this results in clearer contrast for larger structures and reduced need for constant refocusing during demonstrations or inspection rounds. The specification is therefore a practical choice where ease of use and reliable image quality are priorities, rather than pushing the limits of microscopic resolution. Designed to support education and inspection workflows The MicroBlue series places emphasis on straightforward performance for teaching and routine inspection. Drawn from educational documentation, the objective is optimised for environments where fast, comprehensible images are required to convey detail or locate areas of interest. This makes the lens a suitable option for training labs, schools and workshop quality checks where robust, predictable optics speed up workflow and reduce setup time. The simple, well-defined optical characteristics contribute to user confidence during demonstrations and inspections. Clear specifications for procurement and inventory control Identification and procurement are simplified by the clear labelling and series designation. The Euromex MicroBlue line, and specifically the MB.7004 designation, ensures straightforward stockkeeping and compatibility checks within instrument inventories. The concise technical profile—magnification and aperture—allows purchasing and maintenance teams to compare optics on objective criteria and to plan instrument configurations without ambiguity. This focused specification reduces decision time when equipping teaching benches or inspection stations and supports a predictable supply chain. Discuss the Euromex MicroBlue MB.7004 with Metav Werkzeuge for fast verification of fit and application – contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to request further technical clarification or procurement assistance Technical data Article number: MB.7004 Manufacturer: Euromex Model series: MicroBlue Product type: microscope objective SKU: MB.7004 Source: Education PDF S. 7 Facts Magnification: 4x Numerical aperture: 0.10 Objective designation: 4x/0.10 Special features Part of MicroBlue series Intended for microscopes Label: Mikroskopobjektiv MicroBlue MB.7004 UID: MB.7004 FAQ What magnification and aperture does this objective provide? The Euromex MicroBlue MB.7004 offers 4x magnification with a numerical aperture of 0.10, providing a wide field of view and balanced depth of field for overview imaging. Is this objective suitable for educational laboratories? Yes. The MB.7004 is documented in educational materials and is designed to support teaching and routine inspection tasks where easy sample navigation and clear overview images are needed. How does the numerical aperture affect imaging with this objective? A numerical aperture of 0.10 moderates resolution while increasing depth of field and light collection compared with very low-NA optics, resulting in stable focus and improved contrast for larger structures at low magnification. How is the product identified for procurement and stock control? The item is listed as Euromex MicroBlue MB.7004 and referenced by SKU MB.7004, making it straightforward to order and track within inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x Microscope Objective 0.10 NA 17.92 mm Working Distance - Euromex
Benefit from 4x magnification, a numerical aperture of 0.10 and a working distance of 17.92 mm for reliable imaging in educational and routine inspection settings; order the Euromex objective directly via Metav Werkzeuge or consult their specialists for application guidance. Euromex BioBlue.Lab BB.8804 – 4x Microscope Objective, 0.10 NA, 17.92 mm WD Euromex BioBlue.Lab BB.8804 is a microscope objective intended for general microscopy and educational use, designed to combine clear low-power imaging with a generous working distance. 4x magnification objective Working distance 17.92 mm Numerical aperture 0.10 Clear low-power imaging for routine inspection The 4x setting delivers a broad field of view that supports rapid sample overview and positioning. With a numerical aperture of 0.10, the lens provides sufficient light-gathering ability for brightfield observation while keeping depth of field generous, which benefits users during coarse alignment and overview work. This combination reduces the need for frequent refocusing and speeds up routine inspection tasks in teaching labs and basic analysis environments. Generous working distance for practical handling A working distance of 17.92 mm gives comfortable clearance between the objective and the specimen, making it easier to manipulate slides, inserts or light sources without risking contact. For practical workflows in training rooms and production benches, this spacing minimises handling interruptions and supports safer sample changes. The physical clearance is particularly useful when examining thicker specimens or when additional fixtures are used on the stage. Technical clarity for users with varied expertise Key optical terms are explained to aid decision-making: numerical aperture denotes the objective's ability to resolve fine detail and collect light; a value of 0.10 is typical for low-power objectives, balancing brightness and practical depth of field. The modest magnification and optical specification mean the lens is well suited for initial scans, coarse measurements and educational demonstrations, where robustness and ease of use are prioritised over high-resolution imaging. Consistent supply and specification transparency Supplied under the BioBlue.Lab series, this objective adheres to documented educational and life-science specifications, ensuring predictable performance across multiple units. The clearly stated parameters—4x, 0.10 NA, 17.92 mm WD—support repeatable results in classroom settings and routine quality control. For procurement, Metav Werkzeuge acts as a reliable distribution channel to maintain stock continuity and consistent quality for workshops and teaching facilities. Discuss technical fit and availability with Metav Werkzeuge to ensure the BioBlue.Lab BB.8804 meets laboratory requirements and to secure reliable delivery from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: BB.8804 SKU: BB.8804 Brand: Euromex Model series: BioBlue.Lab Product type: Microscope objective Label: Mikroskopobjektiv BioBlue.Lab BB.8804 UID: BB.8804 Measured values Magnification: 4x Working distance: 17.92 mm Numerical aperture: 0.10 Features / Applications For microscopes (category: microscopy accessories) Suitable for educational and routine inspection use Specification source: Education PDF S.16; Life Science PDF S.12 FAQ What magnification does this objective provide? The Euromex BioBlue.Lab BB.8804 microscope objective (SKU BB.8804) provides 4x magnification for wide-field overview imaging. What is the working distance and why does it matter? The working distance is 17.92 mm; this clearance helps when handling slides or specimens and reduces the risk of collisions during sample manipulation. How does a numerical aperture of 0.10 affect imaging? A numerical aperture of 0.10 balances light collection and depth of field, making the objective suitable for brightfield overview and coarse alignment rather than high-resolution detail work. Is this objective appropriate for teaching laboratories? Yes, the optical balance and generous working distance make the BioBlue.Lab BB.8804 well suited for teaching environments and basic inspection tasks. Will this objective work on all microscopes? Compatibility depends on the microscope's nosepiece and mounting standard; the specification sheet for the Euromex BioBlue.Lab BB.8804 should be consulted to confirm mechanical fit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x Microscope Objective 0.10 NA 7.18mm Working Distance - Euromex
Precision optics combine with a practical working distance and a balanced numerical aperture to support routine imaging and educational use. Benefit from the 4x magnification, the 0.10 numerical aperture and a 7.18 mm working distance for safe sample handling; order via Metav Werkzeuge or consult our specialists for compatibility guidance. Microscope objective BioBlue.Lab BB.7204 — 4x, 0.10 NA by Euromex Microscope objective BioBlue.Lab BB.7204 provides low-power imaging suitable for general microscopy and educational applications with a 7.18 mm working distance. 4x magnification for overview imaging 0.10 numerical aperture for contrast balance 7.18 mm working distance for sample clearance Part of BioBlue.Lab series by Euromex Reliable low-power imaging that speeds routine inspections The 4x setting of this low-power objective delivers a wide field of view that accelerates sample overview and specimen orientation, reducing time spent locating regions of interest. Its 0.10 numerical aperture offers a favourable balance between resolution and depth of field, which is advantageous when scanning slides or working with thicker preparations. The optical design supports consistent contrast and clear visual feedback, helping to maintain throughput in teaching labs and quality-control workflows while keeping image interpretation straightforward. Practical handling and reduced risk at the stage A 7.18 mm working distance gives a measurable clearance between the objective and the specimen, lowering the chance of accidental contact with slides or coverslips during focusing and manipulation. This objective is noted as a PLi objective in the technical documentation, indicating design choices that favour practical use in everyday microscopy. By combining a modest numerical aperture with a safe working distance, the optic supports robust handling protocols and reduces interruptions from re-centring or slide replacement, thereby contributing to steady workflow performance. Trusted series-level performance for education and routine labs Belonging to the BioBlue.Lab series from Euromex, this objective is positioned for general laboratory and instructional environments where dependable, repeatable imaging is required. The specification set—magnification, aperture and working distance—makes it well suited to overview imaging, live-sample observation and preparatory scanning before switching to higher-power objectives. Paired with consistent optical manufacture, the component supports standardisation across multiple microscopes, which simplifies training and reduces calibration variance within a teaching cohort or production line. For reliable compatibility checks and supply of the BioBlue.Lab objective, contact Metav Werkzeuge to discuss system fit, delivery options and stock availability; Metav Werkzeuge supplies precision optics from Emmerich and can advise on integration with existing microscope equipment (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: BB.7204 SKU: BB.7204 Brand: Euromex Product type: Microscope objective Model series: BioBlue.Lab Facts Magnification: 4x Numerical aperture: 0.10 Working distance: 7.18 mm Special features PLi objective Intended for microscopes Label: Mikroskopobjektiv BioBlue.Lab BB.7204 UID: BB.7204 FAQ What is the main application of this objective? The BioBlue.Lab BB.7204 is designed for low-power overview imaging and routine microscopy tasks where a wide field of view and safe working distance are priorities. How does a 0.10 numerical aperture affect image quality? A 0.10 numerical aperture on this objective provides moderate resolution with an increased depth of field, making focus and specimen navigation easier compared with higher-NA, high-magnification lenses. Why is a 7.18 mm working distance important? A 7.18 mm working distance reduces the risk of contact with slides or samples during focusing and manipulation, improving operational safety and handling confidence. Is the BB.7204 suitable for educational laboratories? Yes, the specification and handling characteristics of the BioBlue.Lab BB.7204 make it well suited to teaching labs and routine inspection environments where robust, repeatable imaging is required. Does the objective belong to a series with comparable optics? The objective is part of the BioBlue.Lab series by Euromex, which groups optics with consistent handling and imaging characteristics for straightforward system standardisation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x Microscope Objective Achios-X Observer 0.17 mm Working Distance 0.15 NA - Euromex
Take advantage of the combination of clear low‑magnification overview, a moderate numerical aperture for balanced contrast and resolution, and the compact 0.17 mm working distance for close inspection tasks — order directly via Metav Werkzeuge or consult the specialists for integration advice. Achios-X Observer AX.7304 — 4x microscope objective, NA 0.15 (Euromex) The Achios-X Observer AX.7304 is a 4x microscope objective designed to provide a wide field of view with a numerical aperture of 0.15, optimised for rapid sample orientation and low‑magnification documentation. Low magnification 4x for broad overview Numerical aperture 0.15 for balanced resolution Short working distance 0.17 mm for close inspection Wide‑field overview with dependable optical balance The optical design centres on a 4x power coupled with a numerical aperture of 0.15, which delivers a favourable compromise between resolution and light throughput. For routine inspection and specimen orientation, this combination yields large visual coverage with sufficient detail to locate regions of interest quickly. The specification listed as PL‑SAFi signals a design aimed at stable imaging performance across the field. The moderate NA supports documentation with standard cameras while keeping illumination requirements reasonable; this enables efficient workflows in laboratories and quality‑control stations where fast overview imaging is required. Integrates into inspection workflows; suitable for rapid orientation With a 0.17 mm working distance, the objective places the front lens very close to the specimen plane, which benefits close inspection of thin preparations and mounted samples. This small working distance necessitates careful sample preparation and stage control to avoid contact, but it also improves image detail at low magnification compared with objectives having larger clearances. The design is therefore well suited to applications where quick sample navigation and initial imaging are priorities. Compatibility depends on the host microscope's optical system and mounting; the objective performs best when used with an appropriately configured observation tube and illumination setup. Practical handling, supply reliability and precision assurance Manufactured by Euromex, this optical unit is intended for users seeking straightforward, reliable low‑power imaging. The compact form factor reduces handling complexity and the optical specification supports consistent results in everyday microscopy tasks. Metav's role as a precision partner brings added assurance: decades of product selection and a broad offering make procurement and replacement straightforward. For customers uncertain about integration or requiring further technical data, Metav Werkzeuge provides technical advice and transparent supply from its Emmerich hub, ensuring dependable delivery and a tested quality filter for the European market. Contact Metav Werkzeuge today to discuss the Euromex Achios-X Observer AX.7304 for precise low‑power imaging and to confirm compatibility with existing microscope systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AX.7304 SKU: AX.7304 Manufacturer: Euromex Model series: Achios-X Observer Product type: Microscope objective Facts Magnification: 4x Numerical aperture: 0.15 Working distance: 0.17 mm Special features PL-SAFi optical description (from source) Source: Life Science PDF S. 21,46 Label: Mikroskopobjektiv Achios-X Observer AX.7304 UID: AX.7304 FAQ What magnification does this objective provide? The objective delivers 4x magnification, suitable for broad overview imaging and initial specimen orientation with the Achios‑X Observer AX.7304. What is the numerical aperture and why does it matter? The numerical aperture 0.15 indicates a balanced performance between resolution and light collection; the AX.7304 uses this NA to provide clear low‑power images with practical illumination demands. How close can the objective get to the specimen? The working distance is 0.17 mm, meaning the front lens sits very close to the specimen; careful stage control and sample preparation are recommended when using this objective. Is this objective suitable for documentation with a camera? Yes — the optical balance of 4x and NA 0.15 supports routine documentation when combined with a compatible microscope tube and camera system; the objective is designed for reliable overview imaging and record‑keeping. Who supplies and supports this product in Europe? The Achios‑X Observer AX.7304 is supplied via Metav Werkzeuge for the European market; Metav provides product selection advice and logistical support from Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 mm 20x iScope Microscope Objective NA 0.40, WD 5 mm - Euromex
Take advantage of precise optical performance combined with a short working distance for high-detail imaging in compact setups; order the lens directly via Metav Werkzeuge or consult our specialists for integration advice. iScope IS.7720 microscope objective — 20× / NA 0.40 by Euromex The iScope IS.7720 is a 20× microscope objective designed for high-resolution observation in education and life-science applications, offering a compact working distance for close-sample imaging. 20× magnification for detailed observation Numerical aperture 0.40 for improved resolution Working distance 5 mm for close-up samples PLPH design for sharp image correction Outstanding detail where it matters This optical component delivers 20× magnification with a numerical aperture of 0.40, giving a clear balance between resolving power and depth of field. The elevated aperture improves light-gathering capacity, which results in finer detail when imaging stained preparations or small features on material samples. The design supports consistent contrast and sharpness across the field, making it suitable for teaching laboratories and routine life‑science work where reproducible visual results are required. Compact working distance for close inspections A working distance of 5 mm enables examination of specimens that need to be positioned very close to the lens, such as mounted slides with coverslips or specimens in small containers. While this close proximity demands careful sample handling, it allows higher numerical apertures to be realised in a compact form factor. For users unfamiliar with optical trade-offs: higher aperture increases resolution but reduces the available clearance between lens and sample, so careful focus control and sample mounting improve outcome reliability. Practical optical design explained The objective’s PLPH designation indicates a planachromatic, phase-corrected hybrid design that reduces field curvature and chromatic aberration, yielding a flatter field and more accurate colour rendition across the image. This correction means fewer adjustments are needed for evenly illuminated images and simplifies documentation tasks. The optical correction benefits both novices and experienced microscopists by lowering the time spent compensating for aberrations during routine observation. Integration and application guidance The lens is supplied as part of a standard objective range and is compatible with common microscope nosepiece systems; it suits educational, clinical and industrial inspection workflows that prioritise clear, corrected images at medium magnification. When used with appropriate illumination and condenser settings, the objective supports reproducible results for documentation and measurement tasks. For applications requiring alternative working distances or higher magnification, consult the available range within the same series to match task-specific needs. For tailored technical advice on integrating the Euromex iScope IS.7720 into laboratory or inspection workflows, contact Metav Werkzeuge for expert guidance and supply from Emmerich. Technical Data Article number: IS.7720 SKU: IS.7720 Brand: Euromex Model series: iScope Product type: Microscope objective Optical specifications Magnification: 20× Numerical aperture: 0.40 Working distance: 5 mm Construction & features PLPH objective design Reference: Education PDF p.24; Life Science PDF p.16,41 Description: Microscope objective iScope IS.7720 FAQ What magnification and aperture does this objective provide? The Euromex iScope IS.7720 objective offers 20× magnification with a numerical aperture of 0.40, providing a balance of resolution and depth of field suitable for detailed imaging. Is the working distance sufficient for mounted specimens with coverslips? Yes, the 5 mm working distance is intended for close-sample observation and is compatible with standard mounted slides and coverslips, though careful focusing is recommended due to the short clearance. What does PLPH mean and why is it important? PLPH refers to a planachromatic, phase-corrected hybrid design that reduces field curvature and chromatic aberration, resulting in a flatter field and improved colour accuracy for clearer images with less adjustment. Can this objective be used for both teaching and light‑microscopy inspection tasks? The objective is suitable for education and routine life‑science or inspection work where medium magnification and corrected optics are required, offering reproducible imaging across common laboratory tasks. Are there references documenting the specification values? Specification details for the lens, including magnification, working distance and numerical aperture, are listed in the supplied education and life-science PDFs referenced in the product documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Binocular Dual NeoLED, 2560 x 1920 USB 2.0 - Euromex
Benefit from high-resolution 5 MP imaging, uniform Dual NeoLED illumination and a precision integrated mechanical X‑Y stage for consistent inspection and documentation; order the EcoBlue EC.1157 directly via Metav Werkzeuge or consult our experts for application advice. EcoBlue EC.1157 Digital microscope — 5 MP camera, Dual NeoLED (Euromex) The EcoBlue EC.1157 is a compact digital microscope designed for routine inspection and documentation in laboratories and workshop environments, combining a 5 MP CMOS sensor with achromatic optics and an integrated mechanical X‑Y stage. High-resolution 5 MP sensor Uniform Dual NeoLED illumination Binocular head with achromatic optics Integrated 123 x 119 mm X‑Y stage Reproducible imaging for inspection and quality control The instrument delivers 5 MP images at 2560 x 1920 pixels via a CMOS 1/2.8 inch sensor, enabling clear visualisation of fine details and surface structures. With a maximum 30 fps frame rate under optimal conditions, the system supports live observation and rapid alignment; the stated frame rates apply under the manufacturer's specified conditions. The achromatic objective set (4×, 10×, S40×, S100×) and a four‑position turret allow flexible magnification steps while maintaining colour-corrected images, which aids repeatable measurements and visual comparisons across batches. This combination of sensor resolution and optical correction reduces the need for repeated captures, supporting efficient quality-control workflows. Smooth handling and precise sample positioning Ergonomics and workflow integration are supported by the binocular head, a mechanically robust integrated X‑Y stage (123 x 119 mm) and a fixed objective turret that speeds up routine tasks. The mechanical stage permits controlled lateral movement for systematic scanning and documentation of larger samples without repositioning, which improves throughput and minimises positional errors. Connectivity via USB 2.0 simplifies attachment to standard workstations; the package includes a USB‑2.0 cable and a calibration slide (1 mm/100) to support immediate setup and traceable measurements. Clear documentation and software-assisted analysis Colour-accurate captures are provided in 24 bit colour and are processed using ImageFocus Plus software, enabling measurement, annotation and basic image enhancement. The software enables the creation of standardised image records and supports export for reports, ensuring inspection results are easy to archive and share with colleagues or customers. For applications that require objective comparison, the supplied calibration slide supports scale verification, helping to ensure measurement reliability in routine documentation and audit scenarios. Practical illumination and optics for a wide range of samples The Dual NeoLED illumination system provides stable, LED‑based lighting with low heat output, suitable for thermally sensitive specimens and extended observation times. The achromatic objectives ensure that colour fringing is minimised across magnifications, which is particularly beneficial when assessing coatings, solder joints or material microstructures. The optical and lighting combination reduces artefacts and supports consistent image quality, making the instrument well suited for education, electronics inspection and general workshop metrology. For tailored advice on integrating the Euromex EcoBlue EC.1157 into production or laboratory processes, contact Metav Werkzeuge for technical consultation and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: EC.1157 SKU: EC.1157 Brand: Euromex Model series: EcoBlue Product type: Digital microscope Core specifications Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2,8 inch Frame rate: max. 30 fps Stage size: 123 x 119 mm Features & Accessories Illumination: Dual NeoLED Objectives: Achromatic 4x / 10x / S40x / S100x Head: Binocular Stage: integrated mechanical X‑Y stage Interface: USB 2.0 Software: ImageFocus Plus Included: USB-2.0 cable; calibration slide 1 mm/100 Camera colour depth: 24 bit FAQ What resolution and sensor does the microscope use? The EcoBlue EC.1157 is equipped with a 5 MP camera delivering 2560 x 1920 pixel images on a CMOS 1/2.8 inch sensor. Is the included lighting suitable for sensitive samples? Yes, the Dual NeoLED illumination provides stable, low‑heat lighting suitable for thermally sensitive specimens and prolonged observation. Which magnifications are available with the supplied optics? Achromatic objectives in the set include 4×, 10×, S40× and S100× on a four‑position turret for flexible magnification steps. Can images be measured and annotated? ImageFocus Plus software, supplied with the system, enables measurement, annotation and export for documentation and reporting. What accessories are supplied for calibration and connectivity? The delivery includes a USB‑2.0 cable and a calibration slide (1 mm/100) for verification and immediate connection to a workstation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope EcoBlue EC.1155 Dual LED, 2560 x 1920 CMOS - Euromex
The combination of high-resolution imaging and a stable mechanical X‑Y stage ensures reliable documentation and consistent inspection results for routine laboratory and quality‑control tasks; benefit from the 5 MP sensor and Dual LED lighting for clear, reproducible images. Order the device directly via Metav Werkzeuge or consult our technical advisers for configuration and accessories. EcoBlue EC.1155 Digital microscope — 5 MP camera, Dual LED illumination (Euromex) EcoBlue EC.1155 is a compact upright digital microscope designed for consistent documentation and routine inspection in education, quality control and laboratory environments. 5 MP CMOS sensor, 2560 x 1920 pixels Dual LED illumination for uniform lighting Achromatic objectives 4x / 10x / S40x / S100x Integrated mechanical X‑Y stage 123 x 119 mm Consistent, high‑resolution imaging for documentation and analysis The EcoBlue EC.1155 combines a 5 MP camera with a CMOS 1/2.8" sensor and a native pixel resolution of 2560 x 1920, delivering detailed images suitable for reporting and archival. With a maximum of 30 fps under optimal conditions, the digital camera supports smooth live viewing and quick capture workflows; image files are produced in 24‑bit colour, which preserves colour fidelity for inspection tasks. The USB connection is standard USB 2.0, enabling simple integration with a workstation. The included ImageFocus Plus software facilitates capture, basic measurement and annotation, turning visual inspection into reliable, traceable documentation. Precise optics and a practical stage for repeatable measurements Optical quality and stable sample handling are central to reproducible results: an objective turret with four positions accepts achromatic objectives at 4x, 10x, 40x and 100x, while the monocular head and supplied eyepiece provide a conventional observation option. The integrated mechanical X‑Y stage with dimensions 123 x 119 mm enables systematic sample scanning and accurate relocation of features between captures. This arrangement reduces repositioning time and supports tasks where repeat measurements or comparative imaging are required, such as material inspection or classroom demonstrations. Simple setup, reliable illumination and ready‑to‑use accessories Workflows are simplified by the Dual LED illumination system, which offers even, adjustable lighting for reflective and translucent samples without the need for external light sources. The microscope is supplied with a USB‑2.0 cable and a calibration slide (1 mm/100) for basic scale verification. Note that quoted frame rates apply under optimal conditions as specified by the manufacturer. The system is suitable for routine laboratory work, educational use and standard quality‑control inspections; for bespoke applications or additional accessories consult the accessory list referenced by Euromex. If unsure whether this model fits specific requirements or further technical data are needed, technical advice is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. For reliable image documentation and purchasing advice on the Euromex EcoBlue EC.1155, contact Metav Werkzeuge for personalised consultation and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: EC.1155 SKU: EC.1155 Brand: Euromex Product type: Digital microscope Model series: EcoBlue Connection: USB 2.0 Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2,8 inch Frame rate: max. 30 fps Illumination: Dual LED Objective system: Achromatic objectives 4x / 10x / S40x / S100x Stage: 123 x 119 mm; integrated mechanical X‑Y stage Head: Monocular Software: ImageFocus Plus Accessories included: USB‑2.0 cable; calibration slide 1 mm/100 Facts Resolution: 5 MP Pixel count: 2560 x 1920 Sensor size: 1/2.8 inch Maximum frame rate: 30 fps Stage dimensions: 123 x 119 mm Objective positions: 4 Special features Dual LED illumination Achromatic objective set 4x / 10x / S40x / S100x Monocular head with 10x / 18 mm eyepiece Objective revolver with four positions Integrated mechanical X‑Y stage 24‑bit colour camera output ImageFocus Plus software compatibility USB 2.0 interface Included calibration slide 1 mm/100 FAQ What image quality can be expected from this digital microscope? The EcoBlue EC.1155 digital microscope from Euromex delivers images with a 5 MP sensor at 2560 x 1920 pixels and 24‑bit colour depth, offering clear detail for documentation and basic measurements. Is the illumination suitable for different sample types? Yes, the Dual LED illumination provides uniform lighting suitable for both opaque and translucent samples and helps to reduce shadows and reflections during documentation with the Euromex EcoBlue EC.1155. Does the system include software for capture and measurement? The unit is supplied with compatibility for ImageFocus Plus, which allows image capture, annotation and simple measurements for inspection workflows. What accessories are supplied with the microscope? Included items are a USB‑2.0 cable and a calibration slide (1 mm/100); additional accessories and specific add‑ons are listed on the Euromex accessory references for the digital model family. For which applications is this microscope intended? The EcoBlue EC.1155 (Euromex, SKU EC.1155) is designed for education, routine laboratory work and quality‑control inspections where reliable documentation and straightforward operation are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Monocular Semi‑Plan Lenses 2560 x 1920, 1 W LED, USB 2.0 - Euromex
Take advantage of high‑resolution imaging, a compact digital workflow and a stable mechanical stage to speed routine inspection and documentation — order the BioBlue BB.4245 via Metav Werkzeuge or request technical advice from the Metav consultants. BioBlue BB.4245 — Euromex digital microscope with 5 MP camera and integrated X‑Y stage The BioBlue BB.4245 is a digital upright microscope designed for laboratory inspection and routine documentation, combining a high‑resolution CMOS camera with a semi‑plan objective set for clear, reproducible imaging. 5 MP sensor for detailed captures Semi‑Plan optics for flat field imaging Integrated mechanical X‑Y stage for repeatability USB 2.0 interface for simple data transfer Precise imaging that makes inspection faster and more reliable The built‑in 5 MP camera delivers a native pixel output of 2560 x 1920, supported by a CMOS 1/2.8" sensor; this combination produces sharp stills suitable for documentation and basic measurement tasks. The listed frame capability of 30 fps allows smooth live viewing under normal lighting, while 24‑bit colour rendering preserves colour fidelity for visual assessment. For laboratories where consistent image quality and repeatable results are essential, the optical‑sensor pairing reduces the need for post‑capture correction and streamlines the inspection workflow. Versatile optics for a range of sample types A set of Semi‑Plan objectives (4x, 10x, S40x, S60x) covers both low‑magnification overview and higher‑magnification detail without frequent objective swaps. Semi‑plan optics correct field curvature to deliver an even image across the field of view, which is especially helpful when inspecting flat specimens or small assemblies. The optical selection supports both coarse visual inspection and more detailed surface analysis, while objective labelling and magnification steps simplify method planning for routine tasks. Stable sample handling that improves throughput Samples are positioned on an integrated mechanical X‑Y stage, enabling controlled lateral movement and precise repositioning between captures. This mechanical table reduces manual repositioning time and supports consistent imaging of multiple points on the specimen. The monocular head and compact design, with a stated mass of 3.4 kg, combine to create a stable yet mobile inspection station that fits within constrained bench spaces without sacrificing mechanical robustness. Digital workflow and software compatibility to save time Image capture is facilitated via USB 2.0, providing reliable connectivity to a PC. Included software ImageFocus Plus supports capture, basic measurement and image management functions, reducing setup time for digital documentation. The camera’s sensor and software integration mean images can be archived, annotated and exported in common formats, enabling traceable records and straightforward inclusion in quality reports. For facilities standardising digital records, this configuration supports an efficient documentation pipeline. Illumination and accessories that support reproducible results The microscope’s 1 W LED illumination provides stable, long‑life lighting for transmitted or reflected applications depending on the configured stand and accessories. A list of compatible accessories is maintained by the manufacturer and includes several dedicated items (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) — these are specified on the Euromex accessory list and should be checked for compatibility and restrictions before ordering. The documented accessory ecosystem simplifies station configuration for specific inspection tasks while ensuring optical and mechanical compatibility. Contact Metav Werkzeuge for a tailored quotation, accessory recommendations or technical clarification on the BioBlue BB.4245 (SKU: BB.4245) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BB.4245 SKU: BB.4245 Manufacturer: Euromex Product type: Digital microscope Model series: BioBlue Facts Resolution: 5 MP (2560 x 1920) Sensor: CMOS 1/2.8" Frame rate: max. 30 fps Illumination: 1 W LED Weight: 3.4 kg Interface: USB 2.0 Special features Lens system: Semi‑Plan 4x / 10x / S40x / S60x Stage: Integrated mechanical X‑Y stage Head: Monocular Software: ImageFocus Plus Camera: 24‑bit colour Accessories: AE.5130; AE.5025; AE.5040; PB.5155; PB.5165; PB.5168; PB.5245; PB.5255; PB.5274; PB.5275 FAQ What resolution and sensor type does the camera use? The camera offers 5 MP resolution at 2560 x 1920 pixels and uses a CMOS 1/2.8" sensor for good sensitivity and colour reproduction in the BioBlue BB.4245 digital microscope. Which objectives are included and what do they provide? The optical set includes Semi‑Plan 4x / 10x / S40x / S60x objectives, delivering a flat field for accurate visual inspection and allowing both overview and detailed observation without excessive objective changes. Is there software for image capture and measurement? Yes. The system is supplied with ImageFocus Plus, which supports capture, basic measurements and image management for documentation tasks. Can the stage be used for repeatable multi‑point inspection? The integrated mechanical X‑Y stage enables controlled lateral positioning and repeatable relocation of points of interest across a specimen. What connectivity is available for image transfer? Image transfer and live view are provided via USB 2.0, allowing direct connection to a PC running the supplied software. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com