30.5mm to 23.2mm Conversion Adapter for Stereo Microscopes, C-Mount - Euromex
Take advantage of a precise 30.5 mm → 23.2 mm conversion and secure compatibility with common stereomicroscope eyepiece and camera tubes; order the Euromex DC.1335 conversion adapter directly via Metav Werkzeuge or consult our specialists for application advice. 30.5 mm to 23.2 mm conversion adapter for stereomicroscopes – Euromex DC.1335 A 30.5 mm to 23.2 mm conversion adapter for stereomicroscopes DC.1335 that enables the use of 23.2 mm eyepieces or camera tubes with instruments fitted for a 30.5 mm mount 30.5 → 23.2 mm conversion fit Designed for stereomicroscopes Euromex model DC.1335 Precision fit that extends optical options The conversion adapter provides a direct mechanical link between a 30.5 mm eyepiece or holder and a 23.2 mm tube, reducing the need for improvised fixtures and additional parts. This precise size change preserves the optical axis and maintains optical alignment, so imaging accessories and eyepieces sit concentrically. The result is improved repeatability when switching between oculars, cameras or other inspection accessories, which supports efficient workflow in laboratories and production lines. Reliable mounting for consistent imaging results Engineered as an accessory for stereomicroscopes, the adapter ensures a stable connection that keeps components in the correct position during adjustment and measurement tasks. Consistent mechanical engagement reduces the risk of image tilt or off-axis errors; consequently, users benefit from reproducible visual inspection and digital documentation without unnecessary re‑calibration. The adapter’s straightforward role in the optical chain helps to streamline changeovers and saves valuable bench time. Practical compatibility for workshop and lab environments By converting from one common standard to another, the adapter broadens the range of compatible accessories, enabling older or specialised stereomicroscopes to accept modern 23.2 mm eyepieces and camera tubes. This compatibility is particularly useful in settings where equipment variety is high and replacement of entire systems would be impractical. The accessory represents a focused solution that supports longevity of existing instruments and improves flexibility in mixed‑equipment setups. For flexible laboratory integration, choose the Euromex DC.1335 conversion adapter and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer: Euromex Manufacturer article number: DC.1335 SKU: DC.1335 Product type: Microscope camera adapter Facts Conversion: 30.5 mm → 23.2 mm Compatibility & Features Intended use: Conversion adapter for stereomicroscopes Category: C‑Mount (microscopy accessory) FAQ What does the adapter do and which sizes does it convert? The Euromex DC.1335 conversion adapter converts a 30.5 mm mount to a 23.2 mm tube, enabling the connection of 23.2 mm eyepieces or camera tubes to instruments with a 30.5 mm holder. Is the adapter suitable for all stereomicroscopes? The adapter is designed for use with stereomicroscopes that accept a 30.5 mm eyepiece or holder and require a 23.2 mm interface; compatibility depends on the microscope’s existing mount standard. Can the Euromex DC.1335 be used with camera attachments? Yes, the adapter allows 23.2 mm camera tubes to be mounted on a 30.5 mm holder, making it suitable as a microscope camera adapter for imaging applications. Manufacturer: Euromex
30mm 4x Achios-X Observer Microscope Objective 0.10 NA, WD 30 mm - Euromex
Take advantage of the combination of low-magnification overview capability, a long working distance and a defined numerical aperture for reliable inspection and handling of larger samples; order the lens directly via Metav Werkzeuge or consult our specialists for integration advice. Achios‑X Observer AX.7204 — 4x microscope objective with 30 mm working distance by Euromex The Achios‑X Observer AX.7204 is a 4x microscope objective optimised for low‑magnification overview imaging and applications requiring an extended working distance. 4x magnification for overview imaging 30 mm working distance for bulky samples Numerical aperture 0.10 for defined resolution Designed for integration with microscope inspection setups Broad overview imaging that speeds up inspection The 4x setting delivers a wide field of view for rapid visual assessment, making the lens suitable for tasks where quick orientation and defect localisation are essential. With a numerical aperture of 0.10, the lens balances resolution and depth of field so that coarse surface structures and assembly features remain distinct without the need for repeated refocusing. This combination supports efficient workflows in inspection and quality control by reducing handling time and accelerating decision cycles. Generous working distance for safe sample handling A working distance of 30 mm reduces the risk of collisions with bulky or uneven samples and simplifies use with fixtures, clamps and additional probes. This spatial clearance permits easier access for manipulators and measurement tools while preserving image stability, which is particularly valuable in production or laboratory environments where repeatable setups matter. The lens thus reduces the logistical constraints of sample preparation and contributes to calmer, more reliable measurement routines. What the optical numbers mean for everyday use The specification 0.10 for the numerical aperture denotes the lens’s light‑gathering ability and its influence on resolving fine details. In practical terms, a moderate NA like this provides a compromise: sufficient contrast and clarity for component inspection while maintaining a useful depth of field for uneven surfaces. The designation as a PLi objective (4x/0.10, WD 30 mm) indicates an optic designed with practical, industrial observation in mind rather than ultra‑high magnification imaging, so illumination requirements and alignment are forgiving compared with specialist high‑NA objectives. Compatibility and integration into measurement workflows The AX.7204 is part of the Achios‑X Observer series and is presented as a compact, serviceable objective for microscopy accessory systems categorised for microscopes. The SKU AX.7204 makes ordering and stock tracking straightforward. The optical characteristics support straightforward integration into visual inspection benches, educational microscopy setups and basic metrology stations where robust, repeatable overview imaging is required. For specialised imaging chains, confirm mechanical thread and parfocal requirements against the host microscope system. For tailored advice on fitting the Euromex Achios‑X Observer AX.7204 into existing microscopes or to arrange supply from Metav Werkzeuge—Europe’s precision partner for workshop metrology—contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and availability from Emmerich. Technical data Article number: AX.7204 SKU: AX.7204 Brand: Euromex Model series: Achios‑X Observer Product type: Microscope objective Facts Magnification: 4x Working distance: 30 mm Numerical aperture: 0.10 Special features 4x/0.10 PLi objective, WD 30 mm Category path: Microscopy accessories → Objectives → For microscopes Source note: Life Science PDF (4x/0.10 PLi objective. WD 30 mm) FAQ What level of detail can be expected from this objective? The Achios‑X Observer AX.7204 offers low‑magnification overview capability with a numerical aperture of 0.10, providing clear imaging of coarse features and assemblies rather than high‑resolution sub‑micrometre details. Is the AX.7204 suitable for inspecting bulky or uneven samples? Yes. The 30 mm working distance of the AX.7204 facilitates safe handling and inspection of larger samples or items mounted in jigs, reducing the chance of contact with the lens. Can this objective be used with standard stereo and compound microscopes? The lens is specified for use in microscope accessory systems categorised for microscopes; compatibility depends on the host instrument’s objective mount and parfocal standards—check mechanical fittings before purchase. How does the numerical aperture influence imaging with this lens? A numerical aperture of 0.10 provides a balance between resolution and depth of field: sufficient contrast for inspection tasks while retaining a forgiving focus range for uneven surfaces. What identifier should be used when ordering the lens? Use the SKU/article number AX.7204 and the model series name Achios‑X Observer to ensure the correct item is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm 4x Microscope Objective 0.10 NA, WD 30 mm - Euromex
Take advantage of precise low‑magnification inspection with reliable optics and a generous working distance for safe specimen handling; order the Delphi‑X Observer DX.7204 directly via Metav Werkzeuge or consult our specialists for integration advice. Delphi‑X Observer DX.7204 microscope objective — 4× magnification, 30 mm working distance (Euromex) Delphi‑X Observer DX.7204 is a 4× microscope objective designed for overview imaging and inspection tasks with a long working distance for easier sample access. 4× magnification for overview imaging 30 mm working distance for specimen clearance Numerical aperture 0.10 for balanced resolution Compatible with Delphi‑X Observer series Faster inspections with broad, low‑power imaging The 4× magnification delivers a wide field that accelerates sample surveys and positioning, reducing time spent switching objectives during routine inspection. With a 30 mm working distance, the lens provides ample clearance for larger specimens or fixtures, which simplifies automated or manual handling processes. This combination supports higher throughput in QC benches and training labs by enabling quick orientation without compromising basic image detail. Improved clarity where workflow matters Equipped with a numerical aperture 0.10, the optical design offers a useful compromise between depth of field and resolving power; it captures sufficient contrast for clear structural assessment while keeping focus tolerance generous. The PLi optical approach used in this series maintains consistent illumination and edge sharpness across the field, aiding reliable measurement and visual checks. The lens construction is suitable for repeated everyday use in production environments and teaching facilities. What the technical figures mean for operational use The numerical aperture indicates how much light the objective can gather — a higher value improves resolution but reduces depth of field. At 0.10, this objective provides stable focus across slightly uneven samples, reducing refocusing frequency. The 30 mm working distance ensures safe manipulation of samples and accessories beneath the objective, lowering the risk of collisions with stages or probes and supporting ergonomic handling during repetitive tasks. Seamless integration into existing inspection setups Designed as part of the Delphi‑X Observer series, the lens is straightforward to mount into compatible trinocular and binocular microscope stands commonly used in industrial and laboratory settings. The objective is identified by SKU DX.7204 and follows standard mechanical interfaces for quick swaps, enabling a compact set-up for overview tasks. Its characteristics suit it as the first objective in a multi‑lens workflow or as a robust standalone option for routine visual inspection. Contact Metav Werkzeuge for technical guidance on integrating the Euromex DX.7204 into inspection benches and to confirm immediate availability from Emmerich stock via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.7204 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Facts Magnification: 4× Working distance: 30 mm Numerical aperture: 0.10 Special features PLi objective design Intended for overview and inspection imaging Compatible with Delphi‑X Observer series Source: Life Science PDF (4×/0.10 PLi objective. WD 30 mm) FAQ What magnification does this objective provide? The Euromex DX.7204 objective provides 4× magnification, suitable for broad field inspection and quick sample orientation. How much clearance is available between lens and specimen? The objective offers a 30 mm working distance, allowing safe handling of larger samples and fixtures beneath the lens. What image quality can be expected at this magnification? With a numerical aperture of 0.10, the DX.7204 balances resolution and depth of field to deliver clear structural contrast for routine inspection tasks. Is this objective compatible with other Delphi‑X Observer components? Yes, the lens is part of the Delphi‑X Observer series and is designed for mechanical and optical compatibility with that system. Which environments is this objective intended for? The objective is suitable for industrial inspection, education and general laboratory overview applications where a wide field and working clearance are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Phase Contrast Alignment Telescope, Phase-Centred Design - Euromex
Take advantage of precise phase-contrast alignment and a 30 mm tube interface for reliable optical centring; benefit from the compact integration of the Delphi‑X Observer series. Order the phase-centred alignment telescope directly via Metav Werkzeuge or consult our specialists for fitment advice. Phase-centred telescope Delphi‑X Observer DX.9148 — alignment telescope for phase contrast, 30 mm tube (Euromex) The Phase-centred telescope Delphi‑X Observer DX.9148 is an alignment instrument for phase contrast microscopy, designed to assist optical centring tasks through a standard 30 mm tube interface. Alignment telescope for phase-contrast optics 30 mm tube diameter for standard objective ports Delphi‑X Observer series, SKU DX.9148 Achieve reliable phase-contrast alignment fast The primary function of this alignment telescope is to simplify and speed up the optical centring process for phase contrast systems. By providing a clear visual reference, the instrument enables correct positioning of the phase ring relative to the condenser and objective, reducing trial-and-error adjustments. For laboratories and teaching facilities this means fewer interruptions during setup and consistent image quality across sessions. The optical aid reduces alignment time and supports reproducible imaging conditions, which is particularly valuable when multiple objectives or condensers are in use. Seamless integration with 30 mm tube fittings Designed around a 30 mm tube interface, the device fits standard microscope ports used in many phase-contrast configurations. The use of a common tube diameter ensures straightforward mechanical compatibility, allowing the telescope to be inserted without modification into compatible nosepieces or adaptor tubes. This compatibility simplifies workflows in multi-user environments and workshop settings, where rapid swapping of accessories is routine. The uniform mounting also helps preserve instrument alignment during handling and storage. Why precise centring improves diagnostic and research outcomes Correct alignment of the phase components ensures that contrast enhancement is applied where intended rather than introducing artefacts or uneven illumination. The optical centring aid assists in aligning the phase ring concentrically with the objective’s phase plate, which stabilises image contrast and enhances the visibility of transparent specimens. In practical terms, this can result in clearer observation of cellular detail, improved measurement reliability and fewer re-imaging cycles, translating into higher laboratory throughput and greater confidence in results. Designed for routine use within the Delphi‑X Observer family As part of the Delphi‑X Observer series, this alignment accessory complements existing observation equipment and supports predictable integration into established microscope setups. The association with a recognised series underlines consistent design language and accessory interchangeability. For procurement and inventory management, the clear series association and SKU DX.9148 facilitate ordering and stock control, reducing administrative overhead for procurement teams and workshop managers. Contact Metav Werkzeuge for procurement and technical consultation regarding the Euromex Delphi‑X Observer DX.9148 phase-centred alignment telescope—assistance available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9148 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Phase-centred telescope Facts Tube diameter: 30 mm Features & compatibility Application: alignment for phase contrast Tube mount: Ø 30 mm Series: Delphi‑X Observer SKU: DX.9148 FAQ What is the primary use of this alignment telescope? The alignment telescope supports optical centring for phase contrast systems; the Delphi‑X Observer DX.9148 provides a visual reference to align the phase ring with the objective. Which tube diameter does the device require? The instrument is designed for a 30 mm tube interface and is intended to be compatible with microscope fittings that accept a 30 mm tube. Is the telescope part of an accessory series? Yes, the device belongs to the Delphi‑X Observer series and is identified by SKU DX.9148 for inventory and ordering. Can the alignment telescope improve image consistency? Correct use of the alignment aid reduces misalignment-related artefacts and helps maintain consistent phase-contrast performance across sessions. Is specialised training required to use the instrument? Basic familiarity with phase contrast components is sufficient; the alignment telescope is intended to streamline the centring procedure for routine laboratory use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Phase Contrast Centreing Telescope, Ø 30 mm Tube - Euromex
The phase‑centred telescope combines precise optical alignment with a standard Ø 30 mm tube, ensuring fast and reliable phase‑contrast setup; order the IS.9148 through Metav Werkzeuge or ask the consultants for compatibility details. Euromex phase‑centred telescope IS.9148 – Ø 30 mm tube for phase‑contrast systems The phase‑centred telescope IS.9148 is a compact accessory for accurately centring phase components in phase‑contrast microscopy, designed for integration with standard 30 mm tube systems. Phase alignment for phase‑contrast microscopy Ø 30 mm optical tube for standard eyepiece ports Compact design for easy integration Euromex quality and industrial reliability Faster, repeatable phase alignment for routine work The phase‑centred telescope is designed to make optical alignment straightforward and repeatable, reducing downtime during microscope setup. By centring the phase annulus relative to the objective, the accessory streamlines the adjustment process for phase‑contrast techniques, so laboratories and workshops can maintain consistent image quality without prolonged calibration. The clear, mechanical reference provided by the device supports efficient workflow and lowers the risk of misalignment during sample preparation. Compatibility and simple integration into existing systems Featuring a Ø 30 mm tube, this telescope matches common eyepiece and accessory ports, enabling seamless installation into many phase‑contrast configurations. The compact form factor permits placement without obstructing other condenser or illumination adjustments, which simplifies retrofitting on an existing bench or microscope stand. Technical compatibility is determined by tube diameter and optical path—Metav Werkzeuge can advise on fitment and any adapter options required for specific makes and models. Proven supply chain and expert support for dependable use Sourcing through an experienced partner ensures availability and after‑sales guidance: Metav Werkzeuge operates as a precision partner, offering fast, transparent order processing and a broad product range that supports long‑term procurement. With a track record of trusted supply and extensive product selection, the partnership reduces procurement complexity and safeguards workshop continuity. For technical questions or to check system compatibility, Metav’s consultants provide targeted advice based on the telescope’s function and intended application. Contact Metav Werkzeuge for compatibility advice and to secure the Euromex IS.9148 phase‑centred telescope from the Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9148 Brand: Euromex Product type: Phase‑centred telescope SKU: IS.9148 Numbers / Core technical data Tube diameter: Ø 30 mm Special features Phase‑centred design for phase‑contrast microscopy Fits 30 mm tube eyepiece ports Category: Phase contrast accessory FAQ What is the primary purpose of this accessory? The phase‑centred telescope IS.9148 is used to centre the phase annulus relative to the objective for phase‑contrast microscopy, improving image consistency. What tube size does the telescope require? The phase‑centred telescope IS.9148 is specified for a Ø 30 mm tube, matching standard 30 mm accessory ports. Will the IS.9148 fit microscopes from different manufacturers? Compatibility depends on the presence of a 30 mm tube port and the microscope’s condenser layout; the phase‑centred telescope IS.9148 typically integrates with systems designed for phase‑contrast accessories. Can the telescope be used for alignment on non‑phase contrast systems? While intended for phase‑contrast alignment, the phase‑centred telescope IS.9148 can assist in general optical centring tasks where a 30 mm tube interface and similar alignment procedure are applicable. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm to 23.2mm Conversion Adapter for Stereomicroscopes, C-Mount - Euromex
Take advantage of a straightforward optical conversion that expands camera options and preserves alignment: the adapter converts a 30 mm tube to 23.2 mm, enabling the use of standard C‑mount cameras on many stereo microscope heads and avoiding the need for costly microscope changes. Order via Metav Werkzeuge or ask the consultants for compatibility advice. Euromex DC.1330 – 30 mm to 23.2 mm conversion adapter for stereo microscopes Euromex DC.1330 is a conversion sleeve designed to adapt a 30 mm tube diameter to a 23.2 mm interface, allowing connection of C‑mount imaging devices to compatible stereo microscope heads. 30 mm to 23.2 mm conversion adapter For stereo microscopes Compatible with C‑mount cameras Euromex model DC.1330 Adapt different optical standards without replacing the microscope The 30 mm to 23.2 mm conversion provides a practical route to extend imaging capabilities without a major equipment overhaul. By matching tube diameters between an existing stereo microscope and a camera interface, the adapter maintains optical alignment and reduces the risk of vignetting that can occur with improper fittings. This solution is particularly useful for laboratories and inspection benches where flexibility is required: the conversion sleeve enables the attachment of various imaging sensors while keeping the original optical path intact. Integrate cameras quickly for consistent documentation Designed with camera integration in mind, the adapter makes it easier to use C‑mount cameras on heads that accept a 30 mm tube. The C‑mount standard is widely used in industrial and educational imaging, so the conversion ring streamlines the transition from visual inspection to digital documentation. A secure mechanical connection provides repeatable positioning of the imaging sensor, which supports consistent image framing and reliable comparison of captured images across sessions. Small addition, measurable workflow benefits As a compact accessory, the conversion adapter simplifies set-up and reduces downtime. Rather than sourcing a new microscope or a bespoke camera holder, the conversion sleeve offers a cost-effective route to expand capabilities. For workshops, teaching rooms and quality-control stations, this keeps the toolset nimble and allows teams to adapt microscopes to changing imaging tasks quickly. If further specification checks are required, technical advisors can confirm optical compatibility and camera flange distances for specific configurations. For straightforward camera integration on stereo microscopes, contact Metav Werkzeuge to request the Euromex DC.1330 conversion adapter or to receive specialist advice — Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DC.1330 SKU: DC.1330 Manufacturer: Euromex Product type: Microscope camera adapter Facts Conversion: 30 mm to 23.2 mm Application: stereo microscopes Category: C‑Mount Features Enables C‑mount camera connection Label: 30 mm to 23.2 mm conversion adapter DC.1330 Image file: DC.1330.jpg FAQ Is the adapter suitable for all stereo microscope brands? Compatibility depends on the microscope's external tube diameter and the intended camera interface; the Euromex DC.1330 converts a 30 mm tube to a 23.2 mm interface and is therefore suitable where those diameters match. Can standard C‑mount cameras be attached using this adapter? Yes, the conversion sleeve is intended to enable C‑mount camera attachment on heads with a 30 mm tube, facilitating direct connection to C‑mount imaging devices. Will the adapter affect image quality or introduce vignetting? When used in the correct optical configuration the adapter preserves alignment; however, image fall-off can occur if the camera sensor and microscope optics are mismatched — checking the optical train is recommended before extended use. Are any additional accessories included with the adapter? The product is supplied as the conversion adapter; compatibility with specific camera mounts or additional extension tubes should be checked separately. What is the manufacturer and SKU for ordering reference? The adapter is the Euromex DC.1330, SKU DC.1330, listed as a microscope camera adapter. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Tube EWF 10x/20mm Eyepiece, 20mm Field - Euromex
Take advantage of the 10× magnification and 20 mm wide field to speed up inspections while retaining high optical clarity; the compact Ø 30 mm tube ensures simple integration into standard microscope bodies. Order the eyepiece directly via Metav Werkzeuge or ask our consultants for guidance on compatibility and delivery. EWF 10x/20 mm Eyepiece IS.6210 — 10× magnification, 20 mm field for Ø 30 mm tube EWF 10x/20 mm Eyepiece IS.6210 is a wide-field ocular designed for routine laboratory and educational microscopy where an extended field and reliable magnification improve inspection speed and comfort 10× magnification for clear observation 20 mm wide field of view for more context Fits Ø 30 mm eyepiece tube for easy installation Faster, clearer inspections with wide-field optics The 10× magnification provides a usable increase in detail without sacrificing situational awareness, while the 20 mm field of view means more of the specimen is visible at once. This combination reduces the need for constant stage adjustments and speeds up repetitive measurements. The eyepiece is engineered as a wide-field eyepiece, so observers benefit from reduced peripheral distortion and improved optical clarity, which is particularly helpful during prolonged sessions and visual sorting tasks. Straightforward compatibility and installation Designed for microscopes accepting a Ø 30 mm tube, the eyepiece offers uncomplicated integration into existing stands and heads; the standard tube diameter allows quick swapping with compatible oculars. The compact design supports diverse setups, from student benches to quality-control workstations, and is suited to systems where changes between magnifications must be fast and fail-safe. The SKU IS.6210 is referenced for ordering and verification in inventory lists. Reduced operator fatigue and consistent results By combining a wide field with moderate magnification, the ocular lowers eye strain and helps maintain performance across long inspection periods. The larger apparent field of view allows technicians and students to track features more naturally, aiding both manual measurement and visual assessments. Where repeatability matters, using a stable, well-defined eyepiece contributes to consistent observational results and fewer measurement deviations over time. Practical handling and routine care The eyepiece is intended for practical everyday use: optical surfaces should be kept clean with appropriate lens tissue and solvent to preserve high-quality optics and extend service life. As a modular component, it can be stored safely when not in use and replaced without recalibrating the complete optical chain, which minimises downtime in production or teaching environments. For bespoke setups or replacement advice, technical consultants can confirm suitability for specific microscope models. For reliable wide-field observations, opt for the Euromex EWF 10x/20 mm eyepiece IS.6210 and contact Metav Werkzeuge for tailored compatibility checks and prompt delivery from Emmerich Technical data Article number: IS.6210 Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 20 mm Tube diameter: Ø 30 mm Special features EWF wide-field eyepiece design Label: EWF 10x/20 mm Okular, Ø 30 mm Tubus IS.6210 Image file: IS.6210.jpg FAQ What magnification does this eyepiece provide? The eyepiece provides 10× magnification, which is designed to balance detail and field of view for routine inspections. Which eyepiece tube size is required? This ocular fits microscopes with a Ø 30 mm tube, as stated for the EWF 10x/20 mm eyepiece IS.6210. How large is the usable field of view? The eyepiece offers a 20 mm field of view, giving an extended visible area that reduces the need for stage movement. Is the IS.6210 suitable for teaching and laboratory use? Yes—the combination of wide field and moderate magnification makes the IS.6210 suitable for both educational benches and routine lab inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Tubus EWF 10x/22 mm Eyepiece with Pointer, 22 mm Field of View - Euromex
Take advantage of the combination of wide-field optics, a clear integrated pointer and compatibility with standard 30 mm tubes for reliable inspection and measurement tasks; order the eyepiece directly via Metav Werkzeuge or ask our consultants for application support. EWF 10x/22 mm Eyepiece with Pointer IS.6210-P — Wide-field optics, Ø 30 mm tube EWF 10x/22 mm Eyepiece with Pointer IS.6210-P provides a wide visual field and an integrated pointer for straightforward marking and inspection in laboratory and quality-control settings. Wide 22 mm field of view 10x magnification for clear detail Integrated pointer for measurements Fits Ø 30 mm tube Better measurement with a larger visible area The EWF design delivers an expanded 22 mm field of view, which reduces the need for constant specimen repositioning and speeds up inspection routines. With 10x magnification, small features remain discernible while the wider field keeps more of the sample in view; this combination supports faster visual comparisons and fewer repositioning errors during routine checks. The optical layout is geared towards precision tasks where a broad overview and moderate magnification yield the best compromise between context and detail. Simple integration into existing microscopes Designed for microscopes that accept a 30 mm eyepiece tube, the ocular fits Ø 30 mm tubes without ad hoc adapters, which simplifies instrument setup and changeover. The standard tube compatibility helps maintain workflow continuity in multi-user environments and reduces downtime when swapping eyepieces for different tasks. Clear labelling of mounting dimensions and the universal fit support predictable instrument configuration in metrology and inspection stations. Pointer aids clear documentation and annotation An integrated pointer is included to mark features directly within the view field, supporting visual annotation and repeatable alignment during measurements. The presence of a pointer shortens training time for operators and clarifies communication when documenting defects or measurement positions. For inspection processes that require visual referencing—such as routine quality checks or comparative assessments—the built-in pointer provides an immediate, low-effort method of indicating points of interest. Purpose-built for inspection and teaching applications As a microscope eyepiece tailored to measurement and observation, this ocular combines a wide field format with user-friendly markers, making it suitable for routine laboratory inspection, education and quality assurance. The optical characteristics favour tasks where overview and orientation are as important as magnified detail. For workshops and small laboratories seeking dependable, easily integrated optics, the eyepiece offers a pragmatic balance of visibility and utility. For application advice or to place an order through Metav Werkzeuge — including compatibility checks for specific microscope models — please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request the IS.6210-P eyepiece. Technical data Article number: IS.6210-P SKU: IS.6210-P Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Special features EWF (extra wide field) design Integrated pointer for visual marking Suitable for inspection and teaching applications FAQ What does EWF mean and why does it matter? EWF stands for extra wide field; the EWF 10x/22 mm eyepiece increases the visible area, which facilitates faster inspections and easier orientation when measuring features. Is the eyepiece compatible with microscopes that use a 30 mm tube? Yes. The IS.6210-P eyepiece is designed to fit a Ø 30 mm tube and can be used with compatible microscope models without additional adapters. How does the integrated pointer support measurement tasks? The integrated pointer in the IS.6210-P eyepiece provides a clear reference within the field of view, enabling straightforward visual annotation and repeatable alignment during quality checks. Will the 10x magnification be sufficient for routine inspection? For many quality‑control and educational tasks, 10x magnification offers a practical balance between detail and overview; combined with the 22 mm field of view, it reduces the need for frequent sample repositioning. Can the eyepiece be used for documentation during teaching or training? Yes. The wide field and pointer make the eyepiece well suited to demonstration and training, where showing context and marking features clearly are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Tubus Eyecup Pair, Suitable for Ø30mm Tubes - Euromex
Take advantage of a precise fit and reliable eye contact comfort thanks to soft eyecups sized for a 30 mm tube; the paired set ensures symmetrical use on binocular instruments and fast replacement when required. Order the pair directly via Metav Werkzeuge or contact the consultants for advice. A pair of eyecups, Ø 30 mm tube IS.6299 — Euromex microscope accessory, 30 mm tube fit A pair of eyecups, Ø 30 mm tube IS.6299 provides comfortable eye sealing for binocular oculars, suited to standard 30 mm tubes in laboratory and workshop microscopes Compatible with 30 mm tube eyepieces Soft, comfortable eye seal Paired set for binocular instruments Improve observational comfort and consistency with a precise fit These eyecups are designed for straightforward replacement on oculars with a 30 mm tube diameter, delivering a reliable physical barrier that reduces stray light and stabilises the viewing position. The paired supply supports binocular setups, allowing both eyes to benefit from the same contact geometry and preventing asymmetric posture during inspection. Compatibility with a standard tube size means integration into many stereo and educational microscopes is uncomplicated; where the tube conforms to the 30 mm nominal diameter, installation is typically a push-fit or slight rotation to lock, providing an immediate functional upgrade to existing oculars. Maintain focus and reduce fatigue during extended use A well-fitting eyecup contributes directly to ergonomic performance by ensuring a consistent eye-to-eyepiece distance and a soft perimeter that cushions prolonged contact. This minimises minor head movement and helps maintain alignment between the observer and the optical axis, which in turn supports faster, more reliable inspections and reduces visual fatigue in routine measurement or assembly work. The soft seal of the eyecups also reduces interruptions from ambient light, improving contrast and perceived image stability when working with low-contrast samples or under bright workshop lighting. Simple upkeep and reliable replacement for laboratory use The paired eyecup set is a practical service item for workshops and teaching laboratories where ocular wear or hygiene concerns require regular replacement. The design permits quick removal for cleaning or exchange without affecting ocular calibration, which keeps downtime to a minimum. As a compact microscope accessory from Euromex, the item provides a cost-effective way to extend the comfort and functionality of existing microscopes while preserving optical performance; routine maintenance consists of gentle cleaning with a lint-free cloth and mild detergent if required, avoiding abrasive agents that could impair the contact surface. For a dependable eyecup replacement compatible with 30 mm tubes and fast supply from Emmerich, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: IS.6299 SKU: IS.6299 Brand: Euromex Product type: Microscope accessory Facts Tube diameter: 30 mm Special features Paired eyecups Suitable for binocular microscopes Reduces stray light and improves eye contact FAQ Are these eyecups compatible with standard 30 mm ocular tubes? Yes. The eyecups are specified for a 30 mm tube diameter and are intended to fit oculars that conform to that nominal size. How are the eyecups mounted and removed? Mounting is typically by push-fit or slight rotation onto the ocular tube; the Euromex eyecups IS.6299 are designed for quick replacement without tools. Do the eyecups come as a pair and suit binocular instruments? Yes. IS.6299 is supplied as a paired set, ensuring symmetrical fit for binocular microscopes. What maintenance is recommended for these eyecups? Cleaning with a soft, lint-free cloth and mild detergent is advised; avoid solvents or abrasive cleaners that could degrade the sealing surface of the eyecups. Will the eyecups affect optical calibration of the microscope? No. Properly fitted eyecups maintain the eye-to-eyepiece distance and should not alter the optical calibration of the instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Polarisation Filter Fits Filter Holder, Polarising - Euromex
The combination of precise polarisation performance, a compact 32 mm diameter and simple installation into standard filter holders provides reliable contrast enhancement for polarised-light microscopy. Order the component directly via Metav Werkzeuge or consult the sales team for compatibility checks. Polarisation filter BioBlue.Lab BB.9732 — 32 mm polarisation element by Euromex The Polarisation filter BioBlue.Lab BB.9732 is a compact polarisation element for microscopes, intended to improve contrast in polarised-light applications and to be mounted in standard filter holders. 32 mm diameter filter element Compatible with standard filter holders Enhances contrast for polarised microscopy Consistent contrast improvement for polarised microscopy The polarisation filter delivers a clear enhancement of image contrast by selectively transmitting polarised light; this effect supports colour separation and detail recognition in polarised-light techniques. Designed within the BioBlue.Lab series by Euromex, the component is specified as a 32 mm element, which allows integration into common filter carriers used in laboratory and teaching microscopes. The optical function is straightforward: by introducing a polarising element into the illumination or observation path, unwanted glare and isotropic components are reduced, so anisotropic structures become more apparent. This makes the filter valuable for routine laboratory tasks where improved material contrast aids inspection and documentation. Simple integration with existing filter systems Compatibility is a practical advantage: the element is specified to fit in a standard filter holder, permitting retrofitting without changes to the microscope’s optical train. The measured 32 mm diameter corresponds with many commercial filter wheels and slider carriers; this dimension provides a predictable mechanical fit and straightforward replacement workflows in workshop or classroom environments. Installation requires only insertion into the appropriate holder rather than optical realignment, which reduces downtime and keeps instrument maintenance minimal. The mechanical compatibility supports efficient workflows in settings where multiple contrast methods are used in short succession. Reliable optical fidelity for everyday laboratory use Optical reliability and consistent handling are core benefits for users who require repeatable results. As part of the BioBlue.Lab product line, the filter is produced to meet general laboratory expectations for microscopy accessories and to integrate with standard teaching and research microscopes. The design emphasises ease of use and predictable optical behaviour, making it suitable for quality control, materials inspection and educational polarisation demonstrations. For complex or specialised optical requirements, confirmation of holder type and mechanical clearance is recommended to ensure full compatibility with the intended microscope system. Contact Metav Werkzeuge to confirm compatibility with existing filter holders and to arrange supply of the Euromex BioBlue.Lab BB.9732 polarisation filter through Metav’s distribution network Technical Data Article number: BB.9732 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Polarisation filter Source: Education PDF-S. 16; Life Science PDF-S. 12 Facts Diameter: 32 mm Special features Fits in filter holder Polarisation element for polarised-light microscopy Label: Polarisationsfilter BioBlue.Lab BB.9732 FAQ What is the diameter of the polarisation element? The polarisation element has a diameter of 32 mm and is identified as BB.9732. Will this filter fit my microscope’s filter holder? The filter is specified to fit in a standard filter holder; the BioBlue.Lab BB.9732 element is designed for insertion into compatible filter carriers that accept 32 mm elements. Which applications are this element intended for? The component is a polarisation filter intended for use in polarised-light microscopy, supporting contrast enhancement and material inspection. How is the product identified in stock and documentation? The item is listed under SKU BB.9732 and belongs to the BioBlue.Lab series by Euromex. Is this element part of a recognised product line? Yes, the element is part of the BioBlue.Lab series and is supplied under the Euromex brand as a polarisation accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Plan Apochromatic Objective 2x Working Distance, For DZ Series - Euromex
Benefit from plan apochromatic correction, 2x magnification and a 33 mm working distance for flat, colour-accurate low-power inspection; these attributes support reliable documentation and faster decision-making on the production line. Order the objective directly via Metav Werkzeuge or ask the Metav consultants if detailed integration advice is required. Euromex DZ.4020 plan apochromatic microscope objective — 2x, 33 mm working distance Euromex DZ.4020 plan apochromatic objective for the DZ series, designed for low-magnification inspection and straightforward mounting on the DZ microscope body. Plan apochromatic correction 2x magnification for broad overview 33 mm working distance Mounts to DZ microscope body Consistent measurements through flat-field, apochromatic optics The plan apochromatic design delivers a flat field across the image and significantly reduced chromatic aberration, which makes measurements and visual inspection more reliable. For inspection tasks that require consistent image geometry—such as solder-joint checks, PCB inspection or quality control of small assemblies—the optical correction ensures details remain sharp from centre to edge. This optical stability reduces interpretation errors and supports traceable, repeatable inspection routines. Practical working distance for component handling and tooling clearance With a 33 mm working distance, the lens provides ample space for fixturing, probes or light guides while maintaining the 2x overview that helps locate areas of interest quickly. The extended clearance simplifies integration into existing workflows: the operator benefits from easier sample manipulation and the possibility to combine the objective with additional illumination or measuring probes without compromising image quality. Direct integration with DZ-series stereo microscopes for efficient upgrades Specified for mounting on the DZ series body, the component allows swift retrofitting of stereo microscopes used in workshops and inspection benches. The combination of Euromex build quality and standardised mounting reduces downtime during tool changes and keeps alignment predictable. For technicians seeking low-power, high-fidelity imaging without replacing the entire stereo microscope, this objective is a targeted upgrade that improves overall inspection throughput. Suitable applications and selection advice for workshop and lab use This objective is aimed at users in electronics, watchmaking, quality assurance and light manufacturing who need reliable, low-magnification imaging with accurate colour rendition. When a wider field of view and planar image reproduction are priorities—rather than extreme magnification—the plan apochromatic objective offers a balanced solution. If additional technical parameters are required to confirm suitability for a specific setup, Metav’s technical team can advise on compatibility and optical performance. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ.4020 into existing inspection systems or to arrange immediate supply from Emmerich. Technical data Article number: DZ.4020 Manufacturer: Euromex Product type: Microscope objective SKU: DZ.4020 Specifications Magnification: 2x Working distance: 33 mm Features Plan apochromatic correction For DZ series For mounting on DZ microscope body Category: For stereo microscopes FAQ What magnification does this objective provide? The Euromex DZ.4020 offers 2x magnification, giving a broad field suitable for overview inspection and low-power measurement tasks. Is the objective compatible with stereo microscopes? Yes; the lens is specified for the DZ series and is intended for mounting on the DZ microscope body used with stereo microscopes. How does the plan apochromatic correction benefit inspection work? The plan apochromatic design reduces chromatic aberration and provides a flat field, which improves visual accuracy and supports repeatable measurements when using the DZ.4020. Can this objective accommodate fixturing or probes beneath the lens? The 33 mm working distance provides sufficient clearance for typical fixturing, light guides or probes without compromising the field uniformity. Who manufactured this objective and what is the SKU? The objective is manufactured by Euromex; the SKU and article number are DZ.4020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
350mm MacroZoom Digital Microscope 8.3 MP 3840x2160 18:1 Optical Zoom Autofocus, HDMI/USB/Wi‑Fi - Euromex
Take advantage of high-resolution imaging, robust optics and broad connectivity for precise inspection and straightforward documentation; order directly via Metav Werkzeuge or consult the Metav specialists for integration advice. MacroZoom MZ.4700 digital microscope — 8.3 MP, 18:1 optical zoom (Euromex) The MacroZoom MZ.4700 is a compact digital microscope engineered for macro inspection and rapid image capture in laboratories, repair benches and quality control stations. 8.3 MP sensor, 3840 x 2160 pixel resolution Sony CMOS 1/2.8" sensor, up to 60 fps 18:1 optical zoom with autofocus HDMI, USB and WiFi connectivity included Precise imaging that speeds up inspection and documentation The system’s 8.3 MP sensor and 3840 x 2160 pixel output deliver detailed stills that simplify defect detection and measurement tasks. With a Sony CMOS 1/2.8" sensor and image capture at up to 60 fps, motion artefacts are minimised during live inspection, which reduces rework and shortens cycle times. The technical specification translates into clearer images for reporting and traceability, where pixel density supports accurate cropping and regional enlargement without excessive noise. Flexible optics for close-up work and larger assemblies An 18:1 optical zoom provides a wide focal range for both fine-detail examination and overview shots without changing lenses; optical zoom preserves image quality compared with digital magnification. The integrated Autofocus stabilises sharpness during zoom and when inspecting uneven surfaces. On a 24-inch screen, the device achieves a screen enlargement of 2.8–47x at a 190 mm working distance (manufacturer documentation), enabling reliable visual comparison between components and samples. Built-in lighting, connectivity and software for seamless workflows Controlled illumination is supplied by the LED-Ringlight MZ.4740, which ensures even, shadow‑reduced lighting for consistent image capture. For data transfer and integration the unit provides HDMI, USB and WiFi, and it ships with the ImageFocus Alpha software for capture, annotation and basic measurement tasks. Included accessories such as a mouse, WiFi dongle, HDMI cable, power supply, 32‑GB SD card and a tripod make the system operational immediately, reducing set-up overhead and speeding deployment on the production floor. Robust design and practical size for bench or mobile use With a weight of 5.1 kg and dimensions 350 x 375 x 250 mm (H x W x D) the instrument balances stability and portability; it remains steady on a bench yet can be re‑positioned as workflows demand. The combination of industrial design and integrated features supports repeatable inspection routines and improves operator confidence in everyday quality checks. If additional technical details or application-specific advice are required, the Metav team can provide supplementary information and guidance tailored to the working environment. Choose the Euromex MacroZoom MZ.4700 for reliable, high‑resolution macro inspection and contact Metav Werkzeuge for ordering and expert advice from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: MZ.4700 SKU: MZ.4700 Manufacturer: Euromex Facts Resolution: 8.3 MP Pixel resolution: 3840 x 2160 Sensor: Sony CMOS 1/2.8" Frame rate: max. 60 fps Optical zoom: 18:1 Weight: 5.1 kg Dimensions: 350 x 375 x 250 mm (H x W x D) Special features Autofocus LED-Ringlight MZ.4740 ImageFocus Alpha software Connectivity: HDMI; USB; WiFi Supplied accessories: mouse; WiFi dongle; HDMI cable; power supply; 32‑GB SD card; tripod Screen magnification 2.8–47x on 24-inch screen at 190 mm working distance (manufacturer PDF) FAQ What maximum resolution does the system provide? The MacroZoom MZ.4700 captures images at 8.3 MP with a pixel output of 3840 x 2160, suitable for detailed inspection and documentation. Which connectivity options are available for live inspection and data export? The unit includes HDMI, USB and WiFi for live feeds, image transfer and integration with capture software such as ImageFocus Alpha. Is the lighting adjustable for different surface types? Yes, the included LED-Ringlight MZ.4740 provides controlled illumination that reduces shadows and can be positioned to suit reflective or textured surfaces. What accessories are supplied with the microscope? Delivery contains a mouse, WiFi dongle, HDMI cable, power supply, 32‑GB SD card and a tripod, so the device is ready for immediate use. Can the device be used for documentation and measurement tasks? The combination of high pixel resolution, stable optics and ImageFocus Alpha software supports documentation and basic measurements suitable for quality control and reporting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
355 x 270 x 220 mm Digital Microscope EcoBlue EC.1005 5 MP 2560x1920 Dual LED USB 2.0 - Euromex
Take advantage of high-resolution imaging and reliable illumination combined with compact workshop handling for consistent inspection results; order the microscope directly via Metav Werkzeuge or contact their consultants for application advice. EcoBlue EC.1005 digital microscope — 5 MP camera, Dual LED (Euromex) The EcoBlue EC.1005 is a compact digital upright microscope designed for routine inspection, documentation and simple measurement tasks in laboratories and workshops. 5 MP CMOS sensor, 2560 x 1920 pixels Dual LED illumination for even lighting Achromatic objectives 4x / 10x / S40x Includes ImageFocus Plus and calibration slide Precision imaging for repeatable documentation The system is built around a 5 MP CMOS 1/2.8" sensor delivering 2560 x 1920 pixel images at up to 30 fps, which enables sharp stills and smooth live viewing for quality-control workflows. High pixel count and sensor sensitivity permit clear detail capture even at moderate magnifications; image sequences can be recorded and annotated in the bundled ImageFocus Plus software. The 24‑bit colour output supports faithful colour reproduction, which is beneficial when visual assessment or colour-coded inspection criteria are required. Reliable optics and illumination for accurate results Optical consistency is provided by the set of achromatic objectives 4x / 10x / S40x, which are designed to minimise chromatic aberration and maintain edge sharpness across the field. Combined with Dual LED lighting, specimens are illuminated evenly to reduce shadows and improve contrast without heat build-up. The camera interface via USB 2.0 ensures straightforward connectivity to standard PCs or laptops for immediate capture and documentation, making the system suitable for tasks where reproducible images are critical to traceability. Compact footprint and calibration for workshop use The instrument offers a practical 123 x 119 mm stage within a compact housing of 355 x 270 x 220 mm (H x W x D) and a transport weight of 2.6 kg, which supports flexible placement even on small benches. The monocular head and objective turret with four positions simplify routine magnification changes, while the included USB‑2.0 cable and calibration slide (1 mm/100) facilitate measurement-ready use from the outset. Calibrated captures enable documented comparisons over time, and the modest footprint combined with robust illumination makes the microscope well suited for production sampling and educational settings where dependable results and economical operation are priorities. For reliable digital inspection and measurement-ready imaging, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: EC.1005 Brand: Euromex Type: Digital microscope Series: EcoBlue SKU: EC.1005 Facts Resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8" Frame rate: max. 30 fps Stage size: 123 x 119 mm Dimensions: 355 x 270 x 220 mm (H x W x D) Weight: 2.6 kg Special features Dual LED illumination Achromatic objectives 4x / 10x / S40x Monocular head ImageFocus Plus software 24‑bit colour camera Included: USB‑2.0 cable; calibration slide 1 mm/100 FAQ What image quality can be expected from this digital microscope? The EcoBlue EC.1005 features a 5 MP sensor and records at 2560 x 1920 pixels, delivering high-detail stills and live images suitable for documentation and basic measurement tasks. Are measurement functions available with the included software? Yes, the bundled ImageFocus Plus software supports image capture and measurement workflows when used with the EC.1005 and the supplied calibration slide. Which magnifications are provided by the objective set? The optical turret includes achromatic objectives 4x, 10x and S40x, offering a practical range for inspection and sample classification. Is the system ready for immediate use out of the box? The EC.1005 is supplied with a USB‑2.0 cable and a calibration slide (1 mm/100), allowing immediate connection to a PC and calibrated image capture for traceable results. Manufacturer: Euromex Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
355 x 270 x 220 mm Digital Microscope EcoBlue EC.1105 Dual LED, 5 MP CMOS 2560 x 1920, USB 2.0 - Euromex
Take advantage of the combination of high-resolution imaging, versatile achromatic optics and simple connectivity to streamline inspection workflows; order the device directly via Metav Werkzeuge or consult our specialists for tailored advice. EcoBlue EC.1105 digital microscope — 5 MP CMOS, Dual LED (Euromex) The EcoBlue EC.1105 is a compact upright digital microscope for documentation, quality control and teaching applications in laboratory and workshop environments 5 MP sensor, 2560 x 1920 pixels Dual LED illumination for even lighting Achromatic objectives 4x / 10x / S40x / S100x Includes ImageFocus Plus software and USB cable Pin-sharp imaging for precise inspection The unit delivers 5 MP images at 2560 x 1920 pixels using a CMOS 1/2.8 inch sensor, which provides crisp detail for measurement and defect detection. A maximum frame rate of 30 fps facilitates smooth live observation and reduces motion blur during positioning; note that frame rates are achievable under optimal conditions as stated by the manufacturer. The integrated 24-bit colour capture preserves natural colour rendition, so documentation and analysis remain reliable across repeat inspections. Optics and stage that speed up measurement A four-position objective turret fitted with achromatic objectives (4x / 10x / S40x / S100x) reduces chromatic aberration and yields sharper, higher-contrast images compared with simple magnifiers. The monocular head combined with a 10x / 18 mm eyepiece supports conventional observation, while the 123 x 119 mm stage gives stable sample positioning for routine checks. A supplied calibration slide (1 mm / 100 divisions) enables traceable measurements when paired with the included software, so measurement results can be reproduced and documented consistently. Engineered for day-to-day laboratory and workshop use At 355 x 270 x 220 mm and weighing 2.6 kg, the instrument occupies a modest footprint and can be integrated into bench-top inspection stations without extensive reorganisation. The Dual LED illumination system provides uniform light with low heat output, making it suitable for extended sessions and sensitive samples. Robust construction and straightforward controls mean the device supports frequent use in education, quality assurance and light industrial inspection, improving throughput without adding complexity. Capture, analyse and report with minimal delay Connectivity via USB 2.0 and the bundled ImageFocus Plus software create a direct path from observation to digital records: capture stills, record video and apply basic measurement tools within the application. The camera’s colour depth and software support accelerate documentation and reduce post-processing time, improving operational efficiency. Compatibility with the Euromex accessory list ensures the system can be extended for specialised tasks; consult the accessory notes for suitable additions and any constraints. For tailored advice on integrating the EcoBlue EC.1105 into production or education workflows, contact Metav Werkzeuge for a detailed consultation and purchase support — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and availability. Technical Data Article number: EC.1105 SKU: EC.1105 Label: EcoBlue EC.1105 Brand: Euromex Product type: Digital microscope Model series: EcoBlue Facts Dimensions: 355 x 270 x 220 mm (H x W x D) Weight: 2.6 kg Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Frame rate: max. 30 fps Sensor: CMOS 1/2.8 inch Stage size: 123 x 119 mm Special features Illumination: Dual LED Objectives: Achromatic objectives 4x / 10x / S40x / S100x Microscope head: Monocular Eyepiece: 10x / 18 mm Camera: 24-bit colour Software: ImageFocus Plus Connection: USB 2.0 Accessories included: USB-2.0 cable; calibration slide 1 mm/100 Compatible accessories: see Euromex digital model family list (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) FAQ What imaging performance can be expected from this digital microscope? The EcoBlue EC.1105 provides 5 MP images at 2560 x 1920 pixels with a CMOS 1/2.8 inch sensor; this delivers accurate detail for inspection and measurement tasks. Is the microscope suitable for routine measurement work? Yes. The combination of achromatic objectives, a 123 x 119 mm stage and the supplied calibration slide enables reproducible measurements when used with ImageFocus Plus. Which illumination is used and why does it matter? Dual LED illumination ensures even lighting with low heat output, which reduces glare and preserves sample integrity during extended observation sessions. How are images transferred and recorded? Image capture and transfer are handled via USB 2.0; ImageFocus Plus software is included for stills, video capture and basic measurement functions. Are additional accessories available for specific applications? Compatible accessories are listed for the Euromex digital model family (see AE.5130, AE.5025, AE.5040 and PB-series codes); check the accessory list for applicability and restrictions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360mm Polariser 360° Rotatable for DZ Series Objectives, Adjustable Polarisation - Euromex
Take advantage of precise contrast control and full 360° rotation combined with straightforward compatibility for DZ-series objectives to improve polarisation workflows and reduce rework. Order the Euromex polariser directly via Metav Werkzeuge or ask the consultants for application advice. DZ.9045 360° Rotatable Polariser for DZ-series Microscope Objectives by Euromex DZ.9045 offers a 360° rotatable polariser engineered to enhance contrast in polarisation microscopy for users of DZ-series objectives. 360° rotation for precise polarisation control Designed for DZ-series microscope objectives Enhances contrast for polarisation techniques Compact mount for simple optical integration Precise contrast control through continuous rotation A continuously adjustable 360° rotatable element enables fine-tuning of polarisation and therefore direct control of contrast in transmitted-light and reflected-light polarisation techniques. By rotating the polariser, the analyser interaction is varied incrementally, which adjusts extinction and maximises feature visibility without changing illumination or objective settings. This technical adjustability translates into measurable gains in inspection repeatability and quicker set-up times for polarisation tasks. Seamless compatibility and minimal disruption to the optical path Engineered for use with DZ-series objectives, the unit integrates into existing optical trains with minimal alignment effort. The compact design preserves the original optical path and working distance of the objective, avoiding the need for re‑calibration of focus or stage positions after installation. Compatibility with the DZ family reduces spare-part complexity and supports a streamlined inventory strategy for laboratories and workshops that use multiple DZ-series optics. Practical benefits for laboratory and inspection workflows Built to support routine polarisation workflows, the device reduces subjective interpretation by providing reproducible polarisation settings that can be recorded and replicated. For quality control and educational environments, the polariser helps to standardise imaging conditions and to accelerate decision-making. If further technical data or compatibility checks are required, Metav Werkzeuge can provide detailed assistance via email or telephone to ensure the accessory meets the intended application. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ.9045 polariser into existing microscopy setups and to request ordering information via Metav Werkzeuge GmbH, the European supply partner. Technical Data Article number: DZ.9045 SKU: DZ.9045 Product type: Microscope objective accessory Brand: Euromex Category path: Microscopy accessories / Contrast methods / Polarisation Facts Rotation: 360° rotatable Compatible with: DZ-series objectives Special features Application: Polarisation techniques 360° adjustable polariser Compact, low‑profile mount FAQ How does the 360° rotation affect image contrast? The DZ.9045 polariser adjusts the interaction between polariser and analyser across a full 360°, enabling controlled contrast changes for clearer observation of anisotropic structures. Is the polariser compatible with all DZ-series objectives? Compatibility is intended for DZ-series objectives; the DZ.9045 polariser is designed to match mechanical and optical interfaces typical of the DZ family. Can the polariser be left in place during routine objective changes? Yes, the compact design permits it to remain in the optical path during objective swaps without significant impact on working distance or alignment when used with DZ-series optics. Does the polariser require special calibration or maintenance? No specialised calibration is necessary beyond standard optical alignment; periodic cleaning of the optical surfaces is recommended to maintain optimal contrast performance. What improvements can be expected in inspection workflows? Using the DZ.9045 from Euromex typically reduces adjustment time and increases reproducibility of polarisation settings, which supports faster and more reliable inspection outcomes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Round Polarisation Set With Analyzer For StereoBlue, Polarising Filter - Euromex
Product data incomplete or inconsistent: the manufacturer "Euromex" is not listed in the approved manufacturer directory, which means that the necessary verification process cannot be completed, and as a result, it is not possible to generate the product description accurately or ensure compliance with the required standards for inclusion in the system, potentially leading to further delays or complications in processing or approving the product for distribution or sale, as the absence of the manufacturer from the directory raises questions about the authenticity, reliability, or legitimacy of the product, making it essential to address this issue promptly to avoid further disruptions.
360° Rotatable Analyzer For Undermount Microscope Head, 360° Rotation - Euromex
Data error: Manufacturer "Euromex" is not listed in the approved manufacturer directory, so a compliant product description cannot be generated; this issue may arise if the manufacturer has not completed the necessary registration process or if their details have not been updated in the directory, which is essential for ensuring compliance with industry standards and regulatory requirements, and it is recommended to verify the manufacturer's status or contact the relevant authority to resolve the discrepancy and enable the creation of an accurate and compliant product description that meets all necessary guidelines and expectations.
360° Rotatable Polariser for DZ Series Stands, Mounted Control - Euromex
Take advantage of the 360° rotatable polariser for precise contrast control and the straightforward compatibility with DZ-series stands to improve polarisation workflows; order directly via Metav Werkzeuge or contact our consultants for installation guidance. Polariser 360° rotatable for DZ-series stand DZ.9047 — Rotating polarisation filter by Euromex The Polariser 360° rotatable for DZ-series stand DZ.9047 is a rotating polarisation filter designed for use with DZ-series microscope stands to enable controlled contrast adjustment in polarisation-enhanced inspections. *360° rotation for full orientation control *Designed for DZ‑series microscope stands *Improves polarisation contrast and visual clarity Better contrast with controlled polarisation A precisely rotating polariser delivers repeatable, adjustable polarisation that enhances material contrast and reveals structural detail otherwise invisible under standard illumination. The supplied rotating element provides 360° rotation, enabling fine tuning of the polarisation direction to match sample requirements. This adjustment reduces glare and emphasises anisotropic features, so inspections become more reliable and measurement decisions are based on clearer visual evidence. The rotating polariser is a simple, mechanical addition that transforms illumination behaviour without altering the optical path length. Smooth integration with DZ-series stands for efficient workflows Compatibility with the DZ-series stand family ensures straightforward fitting and alignment. The rotatable unit mounts directly to the designated holder on DZ stands, maintaining the mechanical stability expected in routine microscopy tasks. Installation and rotation are mechanical, avoiding the need for electronics or recalibration of the optical train, which keeps downtime to a minimum. This arrangement supports efficient workflows and allows teams to switch between polarised and unpolarised observation quickly, preserving throughput in busy inspection or teaching environments. Practical benefits for workshop and laboratory use The compact rotating polariser is engineered for practical, day-to-day use in laboratories and workshops where repeatable viewing conditions are essential. By enabling targeted polarisation control, the accessory helps highlight strain patterns, birefringence and surface textures across a range of materials. The design supports frequent operation and straightforward handling, making it well suited for routine quality checks and comparative examinations. When integrated into standard microscope setups, the polariser helps standardise visual assessment procedures and supports clearer documentation of findings. For precise polarisation control with DZ stands, contact Metav Werkzeuge to arrange supply or technical advice — Metav Werkzeuge can advise on compatibility and delivery to your workshop via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.9047 SKU: DZ.9047 Brand: Euromex Product type: Polarisation filter Facts Rotation: 360° Compatible with: DZ-series stands Special features Rotatable polariser for DZ-series microscope stands Image file: DZ.9047.jpg FAQ How does the rotating polariser improve contrast? The rotating polariser alters the orientation of polarised light, and the Polariser 360° rotatable for DZ-series stand DZ.9047 makes it possible to fine tune that orientation to reveal birefringent structures and reduce glare. Is this polariser compatible with all DZ-series stands? The accessory is specified for DZ‑series stands and is intended to integrate mechanically with those models; compatibility is stated as part of the product description for the DZ.9047 unit. Can the polariser be used for material inspections in workshops? Yes, the rotatable polariser is suitable for workshop and laboratory inspections where polarisation highlights internal stresses, fibres or surface features. Does the unit require electronic control or calibration? No, the rotation mechanism is mechanical and does not require electronic control; this preserves the existing optical alignment and minimises calibration needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Rotatable Polariser Slide For Transmitted Light iScope Polarisation Models, Precision - Euromex
Take advantage of the combination of precise 360° rotation and a quick-fit slider mount for faster contrast adjustment and uninterrupted workflow; order the accessory directly via Metav Werkzeuge or consult the team for compatibility advice. Euromex iScope IS.9608 — 360° rotatable polariser in a slider for transmitted illumination The iScope IS.9608 is a 360° rotatable polariser mounted in a slider, engineered to provide adjustable transmitted-light polarisation for iScope polarisation models. 360° rotation for adjustable contrast Slider mount for quick insertion Designed for transmitted illumination polarisation Precise contrast control for clearer analysis The 360° rotatable polariser enables fine-tuning of polarisation angle to optimise contrast in transmitted-light inspections. By rotating the element a full circle, the observer can isolate birefringent structures or reduce glare, which improves visual differentiation of features in transparent or semi-transparent specimens. The continuous rotation eliminates incremental steps and allows for smooth adjustments, making it straightforward to arrive at the exact optical condition required for measurement or documentation. This results in more reliable visual assessment and fewer repeat examinations, supporting a productive laboratory routine. Seamless integration with polarisation setups Designed specifically for iScope polarisation systems, the slider-mounted polariser fits into the transmitted-light path without time-consuming reconfiguration. The slider format permits rapid insertion and removal, so switching between polarised and non-polarised views is efficient. This reduces downtime during sample preparation and inspection cycles and supports a logical workflow in both teaching and industrial inspection contexts. The accessory’s compatibility with iScope polarisation models ensures mechanical and optical alignment is retained, simplifying setup and reducing the need for trial-and-error adjustments. Practical benefits for daily microscopy tasks The slider design delivers a pragmatic advantage in busy work environments: polarisation can be engaged only when required, then stowed quickly to continue with other contrast methods. This flexibility contributes to faster decision-making and a more ergonomic operating procedure for technicians. Because the component is an accessory tailored to transmitted illumination, it supports targeted use cases such as thin-section analysis, quality control of transparent materials, and polarisation-based contrast enhancement in routine inspections. Understanding polarisation and its impact on results Polarisation controls the orientation of light waves; when combined with crossed analysers or compensators, it highlights anisotropic properties in a sample. Using a rotatable polariser in transmitted-light setups makes it possible to visually emphasise stress patterns, crystal structure, or layered compositions that would otherwise be hard to detect. For users less familiar with polarisation, rotating the polariser while observing the image is the simplest method to learn how optical responses change; the visual feedback is immediate and intuitive, accelerating competence and reducing reliance on external analysis. Contact Metav Werkzeuge for tailored advice on fitting the Euromex iScope IS.9608 to existing microscopes and to arrange supply; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: IS.9608 SKU: IS.9608 Brand: Euromex Product type: microscope filter Application: transmitted illumination polarisation Facts Rotation: 360° Mount: slider Special features Slider-mounted polariser For iScope polarisation models Intended for transmitted-light contrast enhancement FAQ Is the polariser compatible with all iScope polarisation models? The Euromex IS.9608 is designed for iScope polarisation models; compatibility should be checked against the specific iScope series and its slider mount dimensions. How does the 360° rotation improve image interpretation? Full rotation lets the observer adjust the polarisation angle continuously until birefringent features or stress patterns reach optimum visibility, improving clarity and reducing repeat inspections. Can the polariser be inserted or removed during a session without disturbing alignment? The slider format allows quick insertion and removal, enabling seamless transitions between polarised and non-polarised views while maintaining optical alignment. Is this accessory suitable only for specialist laboratories? The slider-mounted polariser supports both routine inspections and advanced analyses, making it suitable for industrial inspection, teaching, and research environments where transmitted-light polarisation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Rotating Round Stage with Built-In Polarising Filter, SB.9524 - Euromex
Benefit from 360° rotation and an integrated polarisation filter for precise sample orientation and enhanced contrast in polarised-light routines; compact form factor allows straightforward integration into existing microscopy workflows. Order the Euromex SB.9524 via Metav Werkzeuge or consult our team for application-specific guidance. SB.9524 — 360° rotatable round polarisation specimen stage by Euromex with built-in polarisation filter The SB.9524 is a round specimen stage for microscopes offering full 360° rotation and an integrated polarisation filter, designed for polarisation contrast techniques in laboratory and educational environments. 360° rotatable round specimen stage Built-in polarisation filter for contrast Suitable for polarisation microscopy setups Improved sample orientation for reliable imaging results The combination of 360° rotation and a circular platform provides precise angular control, allowing repeatable adjustment of birefringent specimens without repositioning the microscope or the sample carrier. This design supports precision alignment during polarised-light examinations, reducing setup time and minimising handling errors. The integrated polarisation element ensures consistent optical conditions across rotations, which translates into reproducible contrast and clearer observation of structural features. Clear polarisation contrast without extra accessories An integrated built-in polarisation filter eliminates the need for separate external polarising components, simplifying the polarised-light configuration of a microscope. For users less familiar with polarisation microscopy: the filter selectively transmits light oscillating in a specific plane, thereby enhancing visibility of anisotropic materials under polarised light. This specimen stage supports standard polarisation contrast techniques and is particularly effective for mineralogy, materials science and teaching applications where reliable contrast is essential. Seamless integration into existing microscopy workflows The compact, round design facilitates straightforward mounting on a broad range of microscope stages and helps maintain an uncluttered workspace. By enabling smooth rotational adjustment, the stage improves observational efficiency—fewer interruptions for manual sample reorientation and faster progression through inspection routines. For further technical details or to verify compatibility with a specific microscope model, Metav Werkzeuge offers direct assistance by e‑mail or phone. Secure polarisation-capable handling with the Euromex SB.9524 — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical Data Article number: SB.9524 Manufacturer: Euromex SKU: SB.9524 Product type: Microscope polarisation stage Facts Rotation: 360° Shape: round Special features Built-in polarisation filter Suitable for polarisation microscopy FAQ What microscopes is the specimen stage compatible with? The specimen stage is compatible with standard microscope platforms used for polarisation contrast; the SB.9524 is designed for straightforward mounting on typical stage interfaces. How does the built-in polarisation filter improve imaging? An integrated polarisation filter in the SB.9524 provides consistent polarised-light conditions, enhancing contrast of anisotropic materials without the need for separate polarising accessories. Is the rotation continuous or stepped? The stage offers continuous 360° rotation to enable fine angular adjustment and repeatable orientation during polarised-light examinations. Can the platform be used for educational demonstrations? Yes, the design and integrated polarisation make the stage suitable for teaching environments where clear visualisation of polarisation effects is required. Where to get further technical information or compatibility advice? For additional technical data or to confirm compatibility with specific microscopes, contact Metav Werkzeuge by e‑mail or phone; the team can provide application-oriented guidance. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
365mm Flexible Gooseneck Light Guide with 365 nm High-Power UV LED, Interchangeable - Euromex
Take advantage of the combination of precise 365 nm UV illumination, an interchangeable self-supporting gooseneck, and straightforward compatibility with common Euromex illumination bases for reliable inspection workflows. Order this component directly via Metav Werkzeuge or consult the Metav team for application advice. LE.5261 Interchangeable Gooseneck Light Guide — 365 nm high‑power UV LED, Euromex light guide An LE.5261 is an interchangeable, self-supporting gooseneck light guide fitted with a 365 nm high‑power UV LED, designed for dedicated microscopy illumination with NZ.9018, LE.5207 and LE.5212 bases. 365 nm high‑power UV LED Interchangeable self-supporting gooseneck *Compatible with NZ.9018, LE.5207, LE.5212 *Current plug version included Improved contrast for demanding inspection tasks The 365 nm wavelength from the integrated UV LED produces targeted ultraviolet illumination that enhances contrast in fluorescence-sensitive inspections and detail work. The concentrated spectral output makes it easier to detect faint fluorescence or surface features that are not visible under white light, supporting reliable visual assessment in microscopy applications. This intensity is supplied in a compact module that integrates neatly with existing illumination ports. Stable positioning for repeatable results The self-supporting gooseneck offers flexible yet stable alignment, allowing the light to be positioned precisely over the inspection area and to hold that position without external clamps. The interchangeable design reduces downtime by enabling quick swaps between compatible illumination bases; maintenance and set-up are therefore faster and more predictable. This mechanical stability contributes directly to consistent imaging and easier repeat measurements in daily operation. Seamless integration and practical supply Designed for direct compatibility with Euromex bases NZ.9018, LE.5207 and LE.5212, the module simplifies procurement and inventory by aligning with established illumination systems. The product is supplied as a single unit in the current plug version and is intended for immediate replacement or upgrade of existing light guides. The compact format supports clutter-free bench layouts while preserving the optical path required for precise microscopy work. For precise UV illumination and fast replacement parts, contact Metav Werkzeuge in Emmerich for delivery and technical advice on the Euromex LE.5261; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.5261 Manufacturer: Euromex Product type: Light guide Packaging unit: 1 piece Core data Wavelength: 365 nm Pack size: 1 piece Special features Interchangeable, self-supporting gooseneck High‑power 365 nm UV LED Compatibility with NZ.9018, LE.5207, LE.5212 Current plug version FAQ Is this light guide compatible with older Euromex illumination bases? The LE.5261 is specified for use with Euromex NZ.9018, LE.5207 and LE.5212 bases; compatibility with other or older bases should be verified against the base connector and power specifications. Can the gooseneck be repositioned during delicate observations without introducing vibration? The self-supporting gooseneck design is intended to hold position once aligned, providing stable illumination for delicate microscopy tasks with minimal disturbance. What is the functional benefit of the 365 nm wavelength? A 365 nm UV LED provides ultraviolet illumination that enhances fluorescence contrast and highlights features that are less visible under visible-spectrum lighting, improving inspection clarity. Is the LE.5261 supplied ready to install? The module is supplied as a single unit in the current plug version and is prepared for direct installation into compatible Euromex illumination mounts. Does the light guide require additional accessories for operation? No additional accessories are listed; the LE.5261 is an exchangeable light-guide unit designed for direct integration with the specified Euromex bases. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37.5mm 4x Microscope Objective 0.10 NA Working Distance 37.5 mm - Euromex
Take advantage of the combination of reliable low‑magnification imaging, a generous working distance and clear optical specifications for efficient sample inspection. Order directly via Metav Werkzeuge or consult the Metav team for integration advice. Microscope objective AE.5591 — 4× magnification, NA 0.10, long working distance (Euromex) Microscope objective AE.5591 delivers low‑magnification overview imaging for educational and routine inspection tasks, offering a balance of field of view and sample access. 4× magnification for overview imaging 37.5 mm working distance for sample access Numerical aperture 0.10 for clear low‑mag observations Faster inspection through clear, low‑magnification optics The combination of 4× magnification and a numerical aperture of 0.10 provides a practical balance between field size and image contrast, making the objective well suited to rapid visual screening and alignment tasks. At low magnification the optical design emphasises a broad field of view and stable contrast rather than extreme resolving power; this means larger samples and assemblies can be examined without frequent refocussing. The specified 37.5 mm working distance further supports handling and manipulation of specimens under the lens, enabling measurement fixtures or probing tools to be used without compromising the working clearance. Practical benefits for laboratory and teaching environments A low‑power objective with a wide depth of field improves the usability of microscopes in multi‑user settings where fast, repeatable results are required. The modest numerical aperture reduces sensitivity to slight illumination changes, which simplifies setup with reflectors, LED rings or transmitted light stages commonly found in teaching and quality control benches. This results in more consistent images during routine checks and reduces the time needed for operator training. The optical specification is therefore an asset where throughput and straightforward handling are priorities. Clear specifications for system integration and selection Specification details are concise and measurable: magnification 4×, numerical aperture 0.10 and working distance 37.5 mm (listed as 4x/0.10 SMP objective, WD 37.5 mm in the manufacturer PDF). These figures allow direct comparison with other objectives when planning optical chains, camera matching or specimen staging. The straightforward optical parameters support predictable imaging behaviour and help with decisions on camera sensor size, eyepiece selection and illumination strategy. For the microscope objective AE.5591, the available data from the manufacturer’s education materials enables rapid assessment for educational labs, inspection stations and similar use cases. For procurement or technical advice on integration with existing microscope stands, contact Metav Werkzeuge — the Metav team can advise on compatibility and supply arrangements from Emmerich. Technical Data Article number: AE.5591 SKU: AE.5591 Manufacturer: Euromex Product type: Microscope objective Facts Magnification: 4× Working distance: 37.5 mm Numerical aperture: 0.10 Special features 4x/0.10 SMP objective specification Source: Education PDF‑S. 13 FAQ What magnification does this objective provide? The objective offers 4× magnification, suitable for overview imaging and initial inspection tasks with the Euromex microscope objective AE.5591. How much working distance is available for sample handling? The objective specifies a 37.5 mm working distance, providing ample clearance for probes, fixtures or manipulation during inspections. What level of resolution can be expected from a numerical aperture of 0.10? A numerical aperture of 0.10 gives good contrast and sufficient resolving power for low‑magnification applications; it is optimised for overview and alignment rather than fine microstructural analysis. Is this objective suitable for educational or routine inspection use? Yes; the combination of wide field of view, stable contrast and extended working distance makes the AE.5591 well suited to education, quality control and general inspection benches. Where are the specification details sourced from? Specifications are taken from the manufacturer’s documentation (Education PDF‑S. 13) and are summarised for clear comparison in the technical data above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37.5mm Microscope Objective 4x 0.10 NA, WD 37.5 mm - Euromex
Take advantage of the combination of 4x magnification, a 37.5 mm working distance and a numerical aperture of 0.10 for straightforward low-power inspection and sample handling; order the objective via Metav Werkzeuge or contact the consultants for clarification. EcoBlue EC.7004 — 4x microscope objective, 37.5 mm working distance EcoBlue EC.7004 is a 4x microscope objective designed for routine low-power observation and inspection tasks in education and laboratory environments 4× magnification for low-power overview Long 37.5 mm working distance Numerical aperture 0.10 for clear contrast Part of the EcoBlue objective series Clear overview with reliable low-power optics The 4x setting of this objective provides a broad field of view that is suitable for preliminary inspection, specimen orientation and teaching demonstrations. The numerical aperture of 0.10 balances depth of field and contrast, which helps to render coarse structural details distinctly while keeping focus tolerances forgiving. For users who need a dependable low-power lens, the combination of magnification and aperture enables faster sample assessment without frequent objective changes, supporting efficient workflows in laboratories and classrooms. Spacious working distance for safe sample handling A working distance of 37.5 mm gives additional room between the front lens and the specimen, reducing the risk of collisions with stages, clamps or tall samples. This clearance simplifies positioning, lighting and manipulation of parts or slides, which is particularly helpful during assembly checks, quality control or educational demonstrations. The greater distance also eases use with bulky holders and non-standard sample mounts, so handling is more comfortable and accidental damage is less likely. Practical compatibility and consistent quality for routine use Built as part of the EcoBlue series by Euromex, this objective integrates into standard microscope objective turrets and supports common inspection tasks. The design focuses on pragmatic performance: reliable optical parameters, straightforward interchangeability and low-maintenance serviceability. For workshops and teaching environments looking to democratise precision, the lens brings consistent results without unnecessary complexity, while Metav’s distribution ensures reliable supply and product guidance when required. Contact Metav Werkzeuge for expert advice on integration and to secure delivery from Emmerich for prompt replenishment of workshop supplies Technical data Article number: EC.7004 Manufacturer: Euromex Model series: EcoBlue Product type: Microscope objective Data Magnification: 4x Working distance: 37.5 mm Numerical aperture: 0.10 Special features Label: Mikroskopobjektiv EcoBlue EC.7004 Category path: Microscopy accessories > Objectives > for microscopes Source: Education PDF page 9 (4x/0.10 objective, WD 37.5 mm) FAQ What magnification does the objective provide? The EcoBlue EC.7004 is a 4x microscope objective, offering low-power magnification for wide-field observation. How does the numerical aperture affect image quality? A numerical aperture of 0.10 on this objective improves contrast at low magnification, making structural details easier to discern while maintaining useful depth of field. Is the working distance sufficient for bulky samples? Yes, the 37.5 mm working distance of the EcoBlue EC.7004 provides ample clearance for larger fixtures and sample holders during inspection. Can this objective be used in teaching and routine inspection? The design and optical parameters make the EcoBlue EC.7004 well suited to classroom demonstrations and routine laboratory or workshop inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37mm 4x Microscope Objective 0.10 NA, 37.0 mm Working Distance - Euromex
Take advantage of the combination of reliable low‑magnification imaging, a long working distance and consistent optical data to streamline sample handling and routine inspection. Order the Euromex bScope BS.7104 directly via Metav Werkzeuge or ask the consultants for further specification support. bScope BS.7104 – Euromex 4x microscope objective, 0.10 NA A bScope BS.7104 microscope objective engineered for low‑magnification overview imaging and comfortable sample access with an extended working distance. 4x magnification for overview imaging 37.0 mm working distance Numerical aperture 0.10 for broad depth Reliable overview imaging with measurable optical performance The 4x low‑power design delivers a wide field of view while maintaining sufficient detail for inspection and documentation tasks. With a numerical aperture 0.10, the lens provides a broad depth of field, which reduces the need for frequent refocusing during routine workflows and supports consistent image capture across uneven samples. These measurable optical specifications allow planners and technicians to predict imaging behaviour and integrate the lens into existing optical chains with confidence. Practical handling and integration into laboratory workflows A 37.0 mm working distance offers ample space for sample manipulation, tooling and lighting without compromising image quality. This spacing is particularly useful in teaching labs and life‑science setups where accessibility is as important as optical performance. The specification sheet notes the lens as a 4x/0.10 objective; in practical terms this means the lens balances field size, contrast and specimen clearance for everyday microscopy tasks. Compatibility with standard nosepieces and common mounting conventions ensures straightforward installation. Confidence in selection and ongoing support from Metav Optical choices influence throughput and reproducibility. The objective’s quantified parameters enable a rational selection based on task requirements rather than guesswork, reducing downtime and rework. As part of Metav’s offering, customers benefit from a centralised supply approach and experienced advice that supports decision‑making for workshops and laboratories alike. If further technical data is required, the Metav team can supply datasheets and guidance to match the objective to specific instruments and applications. Contact Metav Werkzeuge for tailored advice on Euromex optics and dependable delivery from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: BS.7104 SKU: BS.7104 Brand: Euromex Model series: bScope Product type: microscope objective Label: Mikroskopobjektiv bScope BS.7104 Description: Mikroskopobjektiv bScope BS.7104. Vergrößerung: 4x; Arbeitsabstand: 37.0 mm; Numerische Apertur: 0.10 Facts Magnification: 4x Working distance: 37.0 mm Numerical aperture: 0.10 Special features Application: For microscopes Series: bScope Manufacturer article number: BS.7104 FAQ What magnification does this objective provide? The Euromex bScope BS.7104 is specified as a 4x objective, suitable for low‑power overview imaging. What is the working distance and why does it matter? The working distance is 37.0 mm; this affords space for sample handling, fixtures and illumination while maintaining focus stability. How does the numerical aperture affect images? A numerical aperture of 0.10 trades higher resolution for a larger depth of field, which is beneficial for inspecting uneven or thicker specimens. Is this objective suitable for educational and life‑science use? Yes, the combination of 4x magnification and a long working distance makes the objective well suited to teaching labs and routine life‑science observation. Where can further technical documentation be obtained? Detailed specification sheets and sourcing information are available from Metav Werkzeuge; the product is listed as BS.7104 and marketed under the Euromex bScope series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com