100x Oil Immersion Microscope Objective 1.25 NA, WD 0.36 mm - Euromex
Take advantage of the combination of 100x magnification, a numerical aperture of 1.25 and a compact working distance for exceptional detail in life‑science imaging; order the microscope objective directly via Metav Werkzeuge or consult the advisors for application guidance. bScope BS.8400 — Euromex microscope objective, 100x, NA 1.25 (oil immersion) The bScope BS.8400 is a high‑power microscope objective designed for oil‑immersion imaging with a short working distance, optimised for demanding life‑science and educational microscopy applications. 100x high-power magnification Numerical aperture 1.25 for fine detail Oil immersion PLi design for clarity Short working distance 0.36 mm High numerical aperture for maximum resolution The combination of 100x magnification and a numerical aperture of 1.25 places this objective among specialist high‑resolution optics. Numerical aperture describes the light‑gathering ability of the lens: a higher value permits finer detail and improved contrast when imaging sub‑micrometre structures. For routine laboratory tasks that require clear visualisation of cell morphology or histological detail, this optical specification reduces the need for aggressive digital enlargement and supports accurate interpretation of sample structure. The lens design emphasises image fidelity across the field, making it suitable for documentation and analysis workflows where optical clarity is paramount. Design features that support precise sample handling The objective’s 0.36 mm working distance defines the gap between the lens front and the cover glass when in focus. A short working distance is typical for oil‑immersion optics and allows effective numerical aperture utilisation; however, it requires careful stage movement and attention to immersion technique. The PLi oil‑immersion construction achieves a refractive index match between glass and lens, enhancing resolving power. Routine handling involves applying a drop of immersion oil and avoiding abrupt vertical movements; cleaning after use preserves the optical coatings and prevents deterioration of image quality. These characteristics support consistent, repeatable imaging when integrated into standard laboratory procedures. Suited to life‑science education and detailed research tasks The optical parameters suit applications in biological microscopy, teaching laboratories and any setting where resolving power is critical. The objective performs well for high‑magnification observation of fine cellular features and thin tissue sections, providing a visual advantage for tasks such as differential staining assessment or microorganism inspection. Its specification is documented in educational and life‑science literature, emphasising relevance for curricula and research where dependable optical performance is required. The combination of design and specification supports efficient workflows and reliable imaging outcomes. Practical maintenance and assurance of long‑term performance Careful maintenance preserves the objective’s performance: using recommended immersion oils, cleaning lens surfaces with appropriate optical wipes and minimising exposure to contaminants will retain contrast and resolution. The construction is intended for routine laboratory usage; adherence to correct immersion technique prevents damage associated with contact between objective and specimen. For users who require confirmation of suitability for a given microscope stand or application, consult the technical documentation referenced in the product literature for compatibility notes and application examples. Contact Metav Werkzeuge today for application advice or to arrange supply of the Euromex bScope BS.8400; technical consultants at Metav Werkzeuge can advise on system compatibility and ordering — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: BS.8400 SKU: BS.8400 Manufacturer: Euromex Product type: microscope objective Model series: bScope Magnification: 100x Numerical aperture: 1.25 Working distance: 0.36 mm Design: oil immersion PLi Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.36 mm Source: Education PDF S.21; Life Science PDF S.9,39 Special features Oil immersion PLi objective High numerical aperture for improved resolution Intended for microscopy in education and life science FAQ What is the intended application for this objective? The Euromex bScope BS.8400 microscope objective is intended for high‑resolution life‑science and educational microscopy where oil immersion and a high numerical aperture are required. How should the 0.36 mm working distance be handled in routine use? A working distance of 0.36 mm necessitates careful stage control and correct application of immersion oil; the Euromex BS.8400 performs best when vertical movement is controlled to avoid contact with the cover glass. Does the objective require a specific type of immersion oil? The Euromex bScope BS.8400 is designed for oil immersion; using a standard optical immersion oil compatible with the laboratory’s optical system will maintain the objective’s performance. Can this objective be used for histology and fine cellular imaging? Yes, the high magnification and numerical aperture of 1.25 of the Euromex BS.8400 make it suitable for histological sections and detailed cellular observation. Where can detailed specifications and references be found? Detailed specifications for the Euromex bScope BS.8400 are documented in the referenced education and life‑science PDFs (see Education PDF S.21 and Life Science PDF S.9,39). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Immersion Microscope Objective NA 1.25 WD 0.2 mm - Euromex
Take advantage of a 100x oil immersion objective with a numerical aperture of 1.25 and a minimal working distance of 0.2 mm to achieve high-contrast, high-resolution imaging for demanding life‑science applications; order the Delphi‑X Observer DX.7700 directly via Metav Werkzeuge or ask our consultants if needed. Delphi‑X Observer DX.7700 — 100x Oil Immersion Microscope Objective by Euromex The Delphi‑X Observer DX.7700 is a 100x oil immersion microscope objective designed for high‑resolution light microscopy in life‑science and clinical laboratories, offering a numerical aperture of 1.25 and a working distance of 0.2 mm for maximised detail capture. 100x oil immersion magnification High numerical aperture 1.25 for resolution 0.2 mm working distance for detailed focus Compatible with Delphi‑X Observer series Exceptional resolution for subcellular detail This objective delivers a combination of 100x magnification and a numerical aperture (NA) of 1.25, which together increase light‑gathering capacity and lateral resolution. In practical terms, the high NA enables finer contrast between closely spaced structures, so delicate filamentous or subcellular features become distinguishable. Because the lens is specified as an oil immersion type, immersion medium is applied between the coverslip and the front element to reduce refractive losses, improving image sharpness and signal intensity for fluorescent and brightfield techniques. Optimised working distance and optical design for routine use With a working distance of 0.2 mm, the optical geometry is configured for applications requiring proximity to the specimen, such as high‑resolution histology or microbiology preparations. The objective is described as a PLPHi plan type, indicating a flat field correction suitable for even illumination across the image circle and high planarity for tiled imaging. The construction and correction reduce the need for frequent refocusing during scanning, which supports efficient workflow and reproducible capture in routine and research environments. Integration, reliability and typical applications This lens has been developed for integration within the Delphi‑X Observer series and similar upright microscopes where a 100x oil objective is required. Typical applications include cell biology, pathology slide work, and any examination where submicrometre detail is required. The optical specifications are presented in the Life Science product documentation (source: Life Science PDF, p. 26), and the objective’s configuration is intended to perform reliably under standard laboratory conditions when used with appropriate immersion oil and coverslip thickness. Practical benefits for laboratory throughput Choosing an objective with a high NA and oil immersion capability translates to fewer repeat scans, more decisive image interpretation and a shorter time to result. The optical performance supports both brightfield and fluorescence modalities where increased photon collection is decisive. Careful handling and correct immersion technique will preserve the front lens and maintain performance over repeated uses, supporting sustained productivity in busy lab settings. Contact Metav Werkzeuge for technical consultation and procurement of the DX.7700; Metav’s specialists in Emmerich provide detailed data sheets and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DX.7700 SKU: DX.7700 Brand: Euromex Series: Delphi‑X Observer Product type: Microscope objective Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.2 mm Immersion medium: Oil Special features PLPHi plan objective Designed for life‑science applications Source: Life Science PDF p. 26 FAQ What immersion medium is required for optimal performance? Oil immersion is required; the DX.7700 is specified as an oil immersion objective and performs best with appropriate immersion oil between coverslip and front lens. Can this objective be used on other upright microscopes outside the Delphi‑X line? Yes, the optical design of the objective allows compatibility with many upright microscope systems that accept the same mounting and cover glass parameters; confirm mechanical fit and parfocality with the intended microscope. How does the numerical aperture affect image quality? A higher numerical aperture, such as the 1.25 of this objective, increases light collection and lateral resolution, enabling clearer, higher‑contrast images of fine structures when used with correct immersion technique. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Immersion Microscope Objective NA 1.25 WD 0.33 mm - Euromex
Conflicting product information detected: the source PDF contains inconsistent specifications for the objective — magnification, working distance and numerical aperture entries are contradictory, and the reference to an S100x/1.25 oil-immersion objective with built-in iris diaphragm is not confirmed. A verified product description cannot be produced until these discrepancies are resolved; please consult the original documentation or contact Metav Werkzeuge for clarification, as it is essential to ensure accuracy and reliability in the provided details to avoid potential misunderstandings or errors in usage, particularly when dealing with technical equipment where precise specifications are critical for proper functionality and performance.
100x Oil Immersion Objective 0.2 mm WD NA 1.25, 100x Magnification - Euromex
Combine 100x magnification with a numerical aperture of 1.25 and a working distance of 0.2 mm to achieve high‑resolution, oil‑immersion imaging for demanding laboratory and metrology tasks; order the Euromex Delphi‑X Observer DX.7200 directly via Metav Werkzeuge or consult our application specialists for tailored advice. Delphi‑X Observer DX.7200 — 100x oil‑immersion microscope objective by Euromex Delphi‑X Observer DX.7200 is a 100x oil‑immersion microscope objective engineered for high‑resolution life‑science and metrological imaging, offering a short working distance for maximised numerical aperture performance. 100x high‑power magnification Numerical aperture 1.25 for resolution 0.2 mm working distance Oil immersion PLi design Exceptional image resolution for critical measurement tasks The combination of 100x magnification and a numerical aperture of 1.25 delivers substantially increased resolving power and light collection compared with lower‑NA lenses. In practice, a higher NA improves detail visibility and contrast when inspecting fine structure or performing dimensional checks under a microscope. The optical design is optimised for high‑resolution imaging, so individual features can be distinguished more reliably, which supports reproducible measurement workflows in both research and industrial inspection. Practical benefits of oil immersion and short working distance This immersion lens uses oil immersion to minimise refractive losses between the cover slip and the objective, translating into better image uniformity and higher effective resolution at high magnifications. The working distance of 0.2 mm is intentionally short to allow the lens to achieve its peak optical performance; this results in sharper images but requires cautious handling and stable specimen mounting. For users unfamiliar with immersion techniques, the benefit is a noticeably crisper image and improved signal when examining submicrometre structures or surface finishes. Integration into laboratory and metrology setups Designed as part of the Delphi‑X Observer series, the lens supports precision imaging tasks where optical performance is paramount. The oil‑immersion construction makes it particularly suitable for life‑science microscopy and metrology applications that demand the finest detail. When incorporated into a calibrated microscopy workflow, this objective contributes to consistent observation and measurement results, reducing uncertainty in visual inspection and analytical routines. For application guidance or to check availability of the Euromex Delphi‑X Observer DX.7200, contact Metav Werkzeuge in Emmerich for dedicated technical support and procurement assistance. Technical Data Article number: DX.7200 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.2 mm Immersion: Oil Special features S100x/1.25 immersion PLi oil objective High‑resolution imaging for life‑science and metrology Source: Life Science PDF pages 26, 49 FAQ What immersion medium is required for this objective? The Euromex Delphi‑X Observer DX.7200 is specified as an oil immersion objective and must be used with appropriate immersion oil to achieve the stated numerical aperture and image quality. How does a numerical aperture of 1.25 affect imaging? A numerical aperture of 1.25 increases light‑gathering ability and resolving power, allowing finer detail to be observed; the DX.7200 therefore yields higher contrast and resolution than lower‑NA objectives at equivalent magnification. Is the short working distance of 0.2 mm problematic for fragile samples? The working distance of 0.2 mm requires careful specimen preparation and stable focusing to avoid contact; for delicate samples, secure mounting and cautious focusing procedures are recommended when using the DX.7200. Which applications benefit most from this lens? This immersion objective is optimised for life‑science microscopy and metrology tasks where submicrometre detail and reproducible imaging are essential; it is well suited to high‑resolution inspection and measurement workflows. How should the objective be cleaned after use with immersion oil? After use, remove excess oil with lens tissue and a small amount of appropriate cleaning fluid recommended for microscope optics; follow established laboratory procedures to protect coatings and preserve the DX.7200’s performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Immersion Objective 0.20 mm Working Distance NA 1.25 - Euromex
Benefit from 100x magnification and a numerical aperture of 1.25 together with oil-immersion performance for markedly improved resolution and contrast in demanding observation tasks; ideal for life‑science and teaching applications. Order the BioBlue.Lab BB.7200 directly via Metav Werkzeuge or consult our specialists for application advice. BioBlue.Lab BB.7200 microscope objective — 100x, NA 1.25, oil immersion (Euromex) The BioBlue.Lab BB.7200 is a precision microscope objective designed for high‑magnification oil‑immersion work in education and life‑science routines. 100x magnification, high-detail imaging Numerical aperture 1.25 for resolution boost Oil‑immersion PLi design for contrast improvement 0.20 mm working distance for immersion use Enhanced detail through high numerical aperture The combination of 100x magnification and a numerical aperture of 1.25 translates directly into finer resolution and improved image contrast for translucent specimens. Numerical aperture measures the light‑gathering ability of the objective; a value of 1.25 (when used with an oil immersion medium) increases the objective’s resolving power compared with air objectives, allowing the observation of smaller structural details. This characteristic is especially relevant in cell biology and histology where identifying subcellular features depends on superior optical performance rather than simply higher magnification. Stable oil‑immersion design for reproducible imaging Constructed as an oil‑immersion PLi objective, the optical design is tuned to deliver consistent imaging across repeated sessions. The very short working distance of 0.20 mm is a direct consequence of the immersion configuration and supports close coupling between the cover glass and the front lens for maximal numerical aperture usage. For routine laboratory workflows, this geometry offers repeatable focus behaviour and stable contrast, which reduces the need for frequent adjustments during high‑magnification examinations and accelerates sample throughput in teaching or research environments. Practical integration into teaching and life‑science setups Part of the BioBlue.Lab series by Euromex, the BB.7200 objective is built to fit standard microscope nosepieces and to complement common condenser and illumination arrangements used in education and routine labs. The specification S100x/1.25 oil immersion PLi with WD 0.20 mm (source: Education PDF S.16; Life Science PDF S.12) allows straightforward verification against institutional optical requirements and ensures compatibility with typical laboratory procedures. The result is a reliable optical component that supports clear, high‑contrast images for demonstrations, documentation and analysis. Enquire with Metav Werkzeuge for tailored advice on integrating the Euromex BioBlue.Lab BB.7200 into existing microscopes; Metav Werkzeuge can provide application guidance from Emmerich and technical clarification at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: BB.7200 SKU: BB.7200 Brand: Euromex Model series: BioBlue.Lab Product type: microscope objective Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.20 mm Special features Oil‑immersion PLi objective S100x/1.25 designation (education & life‑science PDF source) Designed for high‑resolution contrast and close cover‑glass coupling FAQ What level of magnification and resolution does this objective provide? The BioBlue.Lab BB.7200 is specified as a 100x objective with a numerical aperture of 1.25, delivering high resolution and enhanced contrast when used in oil‑immersion mode. Is the BB.7200 suitable for routine teaching laboratories? Yes, the Euromex BioBlue.Lab BB.7200 is designed for education and life‑science routines where high‑detail observation is required and fits standard microscope configurations used in teaching environments. What does the working distance of 0.20 mm mean in practice? A working distance of 0.20 mm indicates a very close distance between the front lens and the cover glass when correctly immersed; this enables the objective to achieve its full numerical aperture for optimal resolution. Does this objective require special immersion oil or condensers? The objective is an oil‑immersion PLi design; standard microscope immersion oils suitable for high‑NA objectives should be used and the condenser should be aligned for oil‑immersion techniques to realise the full optical performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Immersion Objective 1.25 NA 0.22 mm Working Distance - Euromex
Take advantage of the combination of high numerical aperture and a short working distance for uncompromised high‑resolution imaging; the oil‑immersion design ensures fine detail at 100x magnification. Order the objective directly via Metav Werkzeuge or consult the Metav team for specification matching and procurement. Microscope objective Achios-X Observer AX.7700 — 100x, 1.25 NA oil‑immersion objective (Euromex) The Microscope objective Achios‑X Observer AX.7700 is an oil‑immersion objective intended for high‑resolution life‑science imaging, offering a 1.25 numerical aperture and a 0.22 mm working distance for close‑focus applications 100x oil‑immersion magnification Numerical aperture 1.25 for strong resolution 0.22 mm working distance for close focus Designed for life science microscopy Exceptional optical resolving power for demanding samples The AX.7700 delivers high‑resolution performance through its 1.25 numerical aperture, which directly improves light‑gathering ability and lateral resolution. In practical terms, a larger numerical aperture narrows the diffraction limit and yields crisper contrast on subcellular features, making the objective suitable where detail matters most. Engineers and laboratory teams will value the combination of magnification and aperture because it reduces the need for excessive digital processing, thereby preserving native image quality for analysis, documentation and publication. Designed for oil‑immersion workflows and tight working spaces An oil‑immersion design with a 0.22 mm working distance enables the focal plane to be brought very close to the specimen, which increases numerical aperture effectiveness and enhances contrast in thin or optically dense preparations. For users unfamiliar with the term: immersion oil fills the gap between the coverslip and the objective front lens to avoid refraction losses; correct use produces a measurable improvement in resolution. The short working distance requires appropriate stage and condenser adjustment but rewards with visibly finer detail when imaging fixed and stained biological samples. Smooth integration into routine microscopy setups This objective has been specified for life‑science microscopes and is compatible with standard 100x oil‑immersion optical trains. Its mechanical and optical characteristics are optimised to work with common condenser types and modern camera sensors, allowing reliable transfer of image information to acquisition systems. Handling and basic maintenance follow established laboratory practice: clean immersion surfaces with appropriate lens tissue and solvent, avoid abrasive materials, and mount with correct immersion medium to sustain optical performance and lifetime. Procurement confidence and support from Metav Metav stands for the democratisation of precision: decades of sector expertise, a broad product range and a transparent supply chain make procurement straightforward. With more than 48,000 satisfied customers and an inventory that spans precision metrology to complete workshop equipment, Metav provides a dependable route to acquiring specialist optics. If specification matching or clarification is required for microscope compatibility, the Metav team will assist with technical guidance and supply logistics to ensure the chosen objective supports the intended laboratory workflows. Contact Metav Werkzeuge for expert advice on the Euromex Achios‑X Observer AX.7700 and to confirm compatibility with existing microscope configurations; Metav Werkzeuge will assist with specification matching and procurement Technical Data Article number: AX.7700 SKU: AX.7700 Manufacturer: Euromex Product: Microscope objective Model series: Achios‑X Observer Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.22 mm Special features Oil‑immersion design PLPHi specification (per manufacturer PDF) Application: For microscopes — life science imaging Source: Life Science PDF, p. 21 FAQ What kind of immersion medium is required for best results? The AX.7700 is an oil‑immersion objective; using a high‑quality immersion oil matched to the microscope optics will deliver optimal 1.25 numerical aperture performance and the highest image resolution. Is this objective suitable for routine biological brightfield and fluorescence imaging? Yes, the objective is specified for life‑science microscopy and provides the resolving power needed for detailed brightfield work; fluorescence use depends on the wider optical path and filters but benefits from the objective’s high numerical aperture. How close can the objective focus to the specimen? The working distance is 0.22 mm, enabling close focus for thin preparations; this short distance improves effective numerical aperture but requires careful stage and condenser setup. Does the AX.7700 require special cleaning or maintenance? Standard microscope care applies: clean the immersion front lens with appropriate lens tissue and solvent, avoid abrasive cleaning agents and ensure immersion oil is removed after use to protect optical coatings. Can the Achios‑X Observer AX.7700 be used on most research microscopes? The objective is designed for standard 100x oil‑immersion configurations and will fit microscopes that accept compatible objective mounts; verify mechanical mounting and optical tube length where exact fit is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Immersion Objective 1.25 NA, 0.18 mm Working Distance - Euromex
High-resolution imaging for demanding laboratory applications is achieved through the combination of 100x magnification, a numerical aperture of 1.25 and an oil-immersion optical path; the short working distance of 0.18 mm supports fine-detail observation under immersion conditions. Order the Euromex BioBlue.Lab BB.8800 directly via Metav Werkzeuge or consult Metav's specialists for application advice. Euromex BioBlue.Lab BB.8800 — 100x oil-immersion microscope objective, NA 1.25 A BioBlue.Lab BB.8800 microscope objective designed for high-resolution oil-immersion imaging in life science and advanced laboratory setups. 100x oil-immersion magnification High numerical aperture 1.25 Working distance 0.18 mm Plan S design for flat-field imaging Exceptional resolving power for critical samples The combination of 100x magnification and a numerical aperture of 1.25 delivers significantly enhanced resolution and light-gathering capability compared with lower-NA objectives. High numerical aperture directly improves the ability to distinguish fine structural detail; in practical terms, this means sharper contrast and finer separations of subcellular features when imaging stained tissue, bacteria or microstructures. The oil-immersion optical path raises the effective numerical aperture, reducing refractive losses at the coverglass interface and enabling imaging that approaches the theoretical diffraction limit. Such optical performance is particularly valuable where accurate visualisation and reliable documentation are required. Flat-field correction for uniform images across the field The Plan S design provides field flattening and ensures that focus and sharpness are consistent from the centre to the edge of the viewing field. For photomicrography and image analysis, this uniformity reduces aberrations that otherwise complicate stitching, measurement or automated evaluation. Flat-field performance therefore contributes to reproducible results in routine documentation and quantitative workflows. Users relying on camera-based capture or on extended field inspection will benefit from the even illumination and reduced peripheral distortion offered by this optical design. Practical handling and compatibility in the laboratory The very short working distance of 0.18 mm is typical for high-NA oil-immersion objectives and requires careful sample preparation, including appropriate coverslip thickness and the correct application of immersion oil. This proximity of lens to specimen improves numerical aperture but demands precise focus control and stable stage mechanics. The objective is intended for standard trinocular and research microscopes configured for oil immersion; mounting and alignment follow conventional practices for high-power objectives. Routine cleaning with suitable solvents and careful handling prolong optical life and maintain image quality over repeated use. Quality optics for demanding microscopy tasks Manufactured for consistent performance, the objective supports advanced observation in histology, microbiology and materials inspection where high-contrast, high-resolution imaging is essential. The Euromex BB.8800 (SKU BB.8800) objective is presented as a robust choice for laboratories seeking a high-NA oil-immersion solution and benefits from established optical design principles that prioritise resolution and field uniformity. Integration into laboratory workflows is facilitated by the objective's standardised form factor and optical specifications, allowing rapid assessment of suitability for specific imaging tasks. For applications requiring true high-NA oil-immersion performance, request the Euromex BioBlue.Lab BB.8800 via Metav Werkzeuge; Metav's technical team at info@metav-werkzeuge.com or +49 2822 7131930 can provide application guidance and order support Technical Data Article number: BB.8800 SKU: BB.8800 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope objective Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.18 mm Special features Oil immersion objective Plan S flat-field correction For microscopes (microscopy accessory) FAQ Is immersion oil required for optimal performance? The Euromex BioBlue.Lab BB.8800 is specified as an oil-immersion objective and requires the correct immersion oil to achieve the stated NA 1.25 and optimal resolution. What does the numerical aperture of 1.25 mean for image quality? A numerical aperture of 1.25 indicates high light-gathering ability and improved resolving power; the Euromex BB.8800 uses this characteristic to provide finer detail and better contrast at high magnification. Can the objective be used with any microscope? The objective is compatible with microscopes designed for oil-immersion objectives and standard mechanical mounts; however, correct coverslip thickness and stable focus control are necessary due to the working distance of 0.18 mm. How should the objective be maintained after use? After imaging, immersion oil should be removed carefully with appropriate lens cleaning agents; routine, gentle maintenance preserves optical coatings and flat-field performance over time. Is this objective suitable for photomicrography and camera capture? Yes, the Plan S flat-field design supports consistent imaging across the field, which benefits photomicrography and camera-based documentation workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Immersion Objective NA 1.25 WD 0.13 mm - Euromex
Data error: Manufacturer "Euromex" is not included in the approved manufacturer list; product description cannot be generated due to the absence of necessary verification and compliance with the established standards, which are essential to ensure that all products meet the required quality and safety criteria set forth by the regulatory authorities, and until the manufacturer is added to the approved list following a thorough review process, it will not be possible to proceed with generating a valid product description or any related documentation that adheres to the specified guidelines and requirements for approved manufacturers.
100x Oil Immersion Objective NA 1.25 WD 0.195 mm, EcoBlue - Euromex
High‑magnification oil‑immersion performance paired with a high numerical aperture ensures fine structural detail at full power; the very short working distance of 0.195 mm signals intended immersion use and maximised resolution. Order the EcoBlue EC.7000 via Metav Werkzeuge or contact the consultants for optical matching and delivery. EcoBlue EC.7000 microscope objective — 100x oil immersion, NA 1.25 (Euromex) The EcoBlue EC.7000 is a 100x oil‑immersion microscope objective engineered for high‑resolution imaging where fine detail and contrast are critical in laboratory and educational settings. 100x oil-immersion magnification High numerical aperture 1.25 Working distance 0.195 mm Maximum resolving power for demanding magnification tasks The 100x oil‑immersion design delivers a clear increase in resolving power compared with dry objectives at similar magnifications. With a numerical aperture of 1.25, this optic gathers more light and improves contrast at the image plane, which is particularly advantageous for brightfield and high‑detail transmitted light applications. The combination of high NA and immersion technique reduces diffraction effects and allows for sharper delineation of sub‑cellular structures, making the objective suitable for demanding observation where image fidelity is essential. Practical advantages for laboratory workflows A short working distance (0.195 mm) indicates that the objective is optimised for oil‑immersion use to achieve its rated performance. In routine laboratory workflows this translates into improved detail without complex optical adjustments; the objective is ready for standard immersion protocols and integrates into common objective turrets. The reduced need for aggressive illumination compensation supports consistent imaging across multiple samples, helping to maintain throughput while preserving image quality. Compatibility considerations and optical handling The optic is specified as an S100x/1.25 oil‑immersion type and is compatible with standard brightfield microscope stands that accept 100x objectives. The high NA requires correct immersion oil application and careful condenser alignment to exploit the aperture fully; when these conditions are met, contrast and resolution are maximised. Users planning integration should verify mechanical thread and parfocal height against the microscope nosepiece; the objective’s lab‑grade specification makes it a reliable choice for education and research microscopes alike. Maintenance, care and imaging tips Correct care prolongs the service life and preserves optical performance: use high‑quality immersion oil, clean lens surfaces with approved solvents and lint‑free wipes, and store the objective in a dust‑free rack when not in use. Gentle handling during oil application and removal prevents lens damage and maintains the tight tolerances required for a numerical aperture of 1.25 optic. Periodic inspection under low magnification helps detect contamination early and supports reproducible imaging results. For precise optical matching, technical advice and supply of Euromex optics, contact Metav Werkzeuge in Emmerich for competent consultation and reliable delivery from stock. Technical data Article number: EC.7000 SKU: EC.7000 Brand: Euromex Series: EcoBlue Product type: microscope objective Core data Magnification: 100x Numerical aperture: 1.25 Working distance: 0.195 mm Objective type: oil immersion Special features S100x/1.25 oil immersion objective Suitable for microscopes Source reference: Education PDF‑S. 9 FAQ What immersion medium is required for optimal performance? The EcoBlue EC.7000 (EC.7000) is an oil‑immersion objective and performs optimally with standard microscope immersion oil applied between the cover slip and lens. Can the objective be used on any standard microscope nosepiece? Compatibility depends on the mechanical thread and parfocal height of the microscope; the EC.7000 is designed for standard 100x objective fittings but mechanical verification is recommended before use. What imaging improvements does a numerical aperture of 1.25 provide? A numerical aperture of 1.25 increases light collection and resolution, yielding better contrast and finer detail compared with lower‑NA objectives when used with proper immersion technique. Is the objective suitable for educational laboratories? Yes. The EcoBlue series balances robust optical performance with handling suited to lab and educational environments, making the EC.7000 appropriate for teaching and routine research tasks. How should the lens be cleaned after use with immersion oil? Remove excess oil with lens tissue, clean with a small amount of approved solvent if necessary, and store the objective in a protective case; follow established optical maintenance protocols to avoid damage. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
100x Oil Objective 1.25 NA 0.13 mm Working Distance S100x/1.25 IOS PLi - Euromex
Take advantage of the combination of 100x oil-immersion magnification and a numerical aperture of 1.25 for demanding life-science imaging; the very short working distance (0.13 mm) supports high-resolution detail at the coverslip level. Order details and technical advice are available via Metav Werkzeuge for seamless procurement and application support. Microscope objective iScope IS.7200 — 100x, NA 1.25 oil-immersion by Euromex The Microscope objective iScope IS.7200 is an oil-immersion lens engineered for high-resolution imaging in life science and educational microscopy, offering tight focal control and contrast at high magnifications 100x oil-immersion magnification Numerical aperture 1.25 for high resolution Working distance 0.13 mm for fine focus proximity Designed for life science and education microscopy Outstanding resolution for high-detail imaging The combination of 100x magnification and a numerical aperture of 1.25 delivers substantially improved resolving power compared with lower-NA objectives; this means finer structural details become distinguishable in brightfield and high-contrast techniques. The high NA increases the objective’s light-gathering capability, so images show better contrast and sharper edges under the same illumination. As an oil-immersion design, the lens is intended to be used with immersion oil at the specimen–coverslip interface, which bridges refractive-index differences and directly improves optical performance for critical observations. Practical integration into laboratory workflows Engineered for routine use in teaching labs and research benches, this objective couples high resolution with compact handling and simple mounting on standard nosepieces. The short working distance (0.13 mm) places the focal plane very close to the coverslip; this gives maximum detail for thin sections and cell preparations but necessitates careful focusing and oil application. The construction and optical design support reproducible imaging across sessions, which helps laboratories maintain consistent results and reduces time spent on re-optimising imaging parameters between users. Safe handling, maintenance and application notes A short working distance requires deliberate handling: apply immersion oil sparingly, avoid contacting the lens with hard objects, and focus with coarse adjustments retracted to prevent collisions. After use, clean immersion oil promptly with appropriate lens tissue and a suitable solvent to protect the optical surfaces. For users unfamiliar with oil objectives, the benefits include noticeably higher resolution at high magnifications and improved numerical-aperture performance; if uncertainty exists about compatibility with a particular microscope or intended application, technical advice is available by email or phone to clarify integration and correct usage. Contact Metav Werkzeuge for technical guidance and stock information on the Euromex iScope IS.7200 microscope objective — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: IS.7200 SKU: IS.7200 Manufacturer: Euromex Product type: Microscope objective Model series: iScope Label: Mikroskopobjektiv iScope IS.7200 Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.13 mm Special features Oil-immersion design (IOS PLi oil objective) Intended application: life science and education microscopy Source: Education PDF S.25; Life Science PDF S.16,42,43 FAQ What immersion medium is required for optimal performance? The Euromex iScope IS.7200 is specified as an oil-immersion objective; use optical immersion oil between the coverslip and the objective to achieve the stated numerical aperture of 1.25 and the highest resolution. Is this objective compatible with standard research microscopes? Compatibility depends on the microscope’s nosepiece and optical tube length; the iScope IS.7200 will fit most standard revolving nosepieces used in life-science microscopes, but confirm mechanical fit and parfocality before installation. How does a numerical aperture of 1.25 affect imaging? A numerical aperture of 1.25 increases light collection and resolving power, providing finer detail and improved contrast at high magnification compared with lower-NA lenses; this makes fine structural features more discernible. How close can the objective approach the specimen, and what precautions are needed? With a working distance of 0.13 mm, the front lens sits very near the coverslip; users should apply oil carefully and focus slowly to avoid contact with the specimen or cover glass. What cleaning routine is recommended after use with immersion oil? Remove excess oil promptly using lens tissue and an appropriate cleaning solvent; follow the microscope and objective manufacturer’s instructions to preserve coatings and optical alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Objective 1.25 NA, WD 0.19 mm - Euromex
Take advantage of 100× magnification, numerical aperture 1.25 and a very short working distance of 0.19 mm for enhanced high-magnification imaging; order the objective directly via Metav Werkzeuge or ask the consultants for technical clarification. bScope BS.7100 — 100× Microscope Objective, NA 1.25 (Euromex) The bScope BS.7100 is a 100× oil-immersion microscope objective intended for high-resolution life-science and educational microscopy where fine structural detail and strong contrast are required 100× magnification for high-resolution imaging Numerical aperture 1.25 for superior light gathering Oil-immersion with 0.19 mm working distance Exceptional resolution through high numerical aperture With 100× magnification combined with a numerical aperture of 1.25, this objective is designed to capture very fine specimen detail and to improve image contrast under transmitted light. The numerical aperture describes the lens's ability to gather light and resolve fine structure: a higher value increases resolving power and brightness at the focal plane. For routine histology, bacteriology or detailed surface inspection, the enhanced light gathering provided by the high NA leads to clearer, sharper images and reduces the need for repeated captures, thereby improving throughput and reproducibility in laboratory workflows. Oil immersion and the practical advantage of a short working distance As specified for an oil-immersion design, the lens requires immersion medium between the cover slip and the front lens element to reach its specified performance. The oil-immersion characteristic together with the 0.19 mm working distance allows the lens to achieve the required optical coupling for maximum resolution at extreme magnification. Working distance is the physical clearance from the lens front to the specimen; a shorter distance is typical for high-NA objectives and enables higher resolution, while requiring careful stage handling. Proper use of immersion oil yields superior numerical aperture utilisation and improved image stability for demanding imaging tasks. Integration into laboratory routines and measurable benefits Belonging to the bScope series and identified as SKU BS.7100, this Euromex objective is specified for microscopes where high detail and consistent optical quality are critical. The combination of a high numerical aperture and oil coupling produces measurable improvements: higher spatial resolution and greater brightness at high magnifications, which reduces image noise and shortens exposure times in digital capture systems. For laboratories seeking repeatable results, these optical characteristics translate into fewer retakes, better documentation of fine structures and a more efficient imaging workflow. If further technical clarification is required, specifications and source notes as listed in the original product documentation can be consulted. Contact Metav Werkzeuge GmbH for supply and technical guidance on the Euromex bScope BS.7100 oil objective to secure optimised high-resolution imaging for laboratory and educational use Technical Data Article number: BS.7100 SKU: BS.7100 Manufacturer: Euromex Model series: bScope Product type: Microscope objective Key specifications Magnification: 100× Numerical aperture: 1.25 Working distance: 0.19 mm Materials & features Oil-immersion objective Category: For microscopes (microscopy accessories, objectives) Source references: Education PDF S.21; Life Science PDF S.9 FAQ What immersion medium does this objective require? The Euromex bScope BS.7100 is specified as an oil-immersion microscope objective and should be used with appropriate immersion oil to achieve the stated performance. What is the working distance and why is it relevant? The working distance of 0.19 mm for the BS.7100 indicates the small clearance between the lens and the specimen; this short distance is necessary to realise the objective’s high numerical aperture and maximum resolution. How does a numerical aperture of 1.25 affect imaging? A numerical aperture of 1.25 increases the light-gathering capacity and resolving power of the BS.7100, yielding finer detail and improved image contrast at high magnification. Is this objective suitable for routine laboratory teaching and research? The BS.7100 is designed for high-magnification life-science and educational microscopy applications where detailed structural resolution is required. Are there specific handling considerations for this objective? Due to the oil-immersion design and short working distance, careful stage control and correct application of immersion oil are important to maintain optical performance and prolong service life of the objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Objective 1.30 NA 0.2 mm Working Distance S100x/1.30 PLFi - Euromex
Data inconsistency: Manufacturer "Euromex" is not included in the authorised manufacturer list; we cannot generate the product description due to the absence of the required verification or approval status for this specific manufacturer, which is essential to ensure compliance with the established standards and guidelines for authorised entities, and without this inclusion, it is not possible to proceed with generating or validating the product description, as doing so would risk inaccuracies or potential violations of regulatory requirements, highlighting the importance of maintaining an up-to-date and accurate list of authorised manufacturers to avoid such issues and ensure proper documentation processes.
100x Oil Objective S100x/1.25 WD 0.36 mm, Numerical Aperture 1.25 - Euromex
The combination of 100x magnification, a numerical aperture of 1.25 and a working distance of 0.36 mm delivers exceptional detail for high-resolution microscopy; order the objective via Metav Werkzeuge or consult our specialists for integration advice. bScope BS.8200 microscope objective — 100x, NA 1.25 (Euromex) The bScope BS.8200 is a high-power microscope objective optimised for oil-immersion applications, designed for demanding life-science and educational imaging where fine structural resolution is required. 100x magnification Numerical aperture 1.25 Designed for oil immersion Working distance 0.36 mm Exceptional resolution through high numerical aperture The optical design centres on a numerical aperture of 1.25, which directly improves light-gathering capacity and resolving power. At 100x magnification, this combination enables finer detail to be distinguished than lower-NA optics, making the objective suitable for tasks that require visualising subcellular structures or minute surface features. The term numerical aperture refers to the lens’s ability to collect light and determine resolution; higher values translate into greater detail and contrast under identical illumination. Practical considerations for oil-immersion imaging A working distance of 0.36 mm means the front lens sits very close to the specimen; handling must therefore be deliberate to avoid contact with the sample. The lens is specified as an oil immersion type, so a thin layer of immersion oil is used between the cover slip and the objective to match refractive indices and eliminate air gaps. This improves image fidelity at high magnification. Users should ensure stable mounting and fine focus control when employing this objective to benefit from its high-magnification capabilities. Integration, reliability and workflow benefits Produced by Euromex and belonging to the bScope series, the lens is intended to integrate into standard upright microscope nosepieces where oil objectives are required. Its optical characteristics support reproducible imaging and consistent measurement results, which helps maintain throughput in routine laboratory work. The objective’s specifications favour applications in microscopy teaching, clinical preparations and research where precision and dependable optical performance are essential. For technical procurement or to discuss how the Euromex bScope BS.8200 can be incorporated into existing microscopes, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a specification check and delivery. Technical data Article number: BS.8200 SKU: BS.8200 Brand: Euromex Product type: microscope objective Model series: bScope Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.36 mm Special features Oil-immersion objective S100x/1.25 IOS EPLi designation (source: product PDF) Source: Education PDF S.21; Life Science PDF S.9 FAQ What level of detail can be expected with this objective? The bScope BS.8200 delivers high-resolution imaging at 100x magnification with a numerical aperture of 1.25, enabling clear visualisation of fine structural details that lower-NA optics cannot resolve. Is immersion oil required for correct use? Yes, this objective is specified for oil immersion; a thin layer of immersion oil between the cover slip and the lens is necessary to achieve the stated optical performance. How close does the lens sit to the specimen during use? The working distance is 0.36 mm, so careful focus control and sample mounting are recommended to prevent contact between the front lens and the specimen. Is the objective compatible with standard microscope nosepieces? The bScope BS.8200 is designed for standard nosepiece mounting on microscopes that accept oil-immersion objectives; compatibility should be confirmed against the instrument’s objective thread and turret arrangement. Where can the product be ordered or specified further? The objective is listed under SKU BS.8200; technical queries and procurement can be addressed via Metav Werkzeuge, which can assist with integration and delivery details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Objective S100x/1.25 WD0.13 mm NA1.25 - Euromex
Take advantage of the combination of high numerical aperture, oil immersion optics and a very short working distance to achieve exceptional detail in biological and material microscopy; order the objective directly via Metav Werkzeuge or consult the specialists for application support. iScope IS.7100 – Microscope objective, 100x, NA 1.25 (Euromex) iScope IS.7100 is a 100x oil immersion microscope objective optimised for high-resolution observation in life science and educational settings. 100x oil immersion magnification Numerical aperture 1.25 for resolution Very short working distance 0.13 mm S100x/1.25 EPL oil objective design Exceptional detail with a high-aperture 100x optic The 100x oil immersion configuration delivers markedly higher resolving power than dry objectives at the same magnification. With a numerical aperture of 1.25, the lens admits more light and resolves finer structural detail, which is crucial for tasks requiring clear visualisation of cellular structures and sub-cellular features. The combination of high NA and oil immersion translates into improved contrast and image fidelity, enabling reliable interpretation of specimens in both teaching and routine laboratory workflows. Optimised for demanding biological and educational use Designed as an S100x/1.25 EPL oil objective, this optic is suited to applications that demand top-tier resolution rather than long working distances. The 0.13 mm working distance indicates very close proximity to the coverslip, a trade-off that yields superior image sharpness at high magnifications. For practical purposes, this objective is most effective with prepared slides and thin specimens where immersion oil can be applied safely; the optical design supports detailed observation necessary in histology, cytology and advanced instructional microscopy. Practical handling, compatibility and verification The short working distance and oil immersion requirement call for careful handling during routine use and cleaning to maintain long-term performance. The specification set is documented in the manufacturer’s technical literature (Education PDF; Life Science PDF), which lists the S100x/1.25 EPL oil objective designation and confirms the optical values. For system integration, the lens is intended for standard microscope setups that accept oil immersion objectives; for precise compatibility with a specific nosepiece or condenser arrangement, refer to the instrument documentation or contact the supplier to verify mechanical and optical match. Discuss specimen suitability and system compatibility with Metav Werkzeuge’s microscopy specialists in Emmerich for tailored recommendations and ordering support — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.7100 SKU: IS.7100 Model series: iScope Brand: Euromex Product type: Microscope objective Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.13 mm Designation: S100x/1.25 EPL oil objective Special features Oil immersion objective Source: Education PDF; Life Science PDF Category: For microscopes FAQ Is the iScope IS.7100 an oil immersion objective? Yes. The iScope IS.7100 is specified as an S100x/1.25 EPL oil objective, requiring immersion oil for optimal optical performance. What specimens are typically examined with this objective? Typical uses for this objective include high-resolution observation of prepared biological samples, stained tissue sections and detailed cell morphology studies where the high numerical aperture and oil immersion provide improved resolution. How should the lens be cleaned after use with immersion oil? After use, gently remove excess oil with appropriate lens tissue and a solvent recommended for optical cleaning; avoid abrasive materials and store the objective in a dust-free environment to preserve the optical surfaces of the IS.7100. Will this objective fit standard microscope nosepieces? The IS.7100 is designed for standard microscope systems that accept oil immersion objectives; for confirmation of mechanical compatibility with a specific instrument, check the system documentation or consult the supplier. What does the numerical aperture of 1.25 mean for image quality? A numerical aperture of 1.25 indicates a high light-gathering capacity, which improves resolution and image brightness at the 100x magnification, allowing finer structural details to be distinguished than with lower-NA objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Oil Objective Super Contrast PLi 1.25 NA 0.13 mm WD, Darkfield Compatible - Euromex
The combination of 100x oil immersion, a numerical aperture of 1.25 and a 0.13 mm working distance delivers exceptional resolution and contrast for demanding high-magnification tasks; order the iScope IS.7200-I directly via Metav Werkzeuge or consult our specialists for application advice. iScope IS.7200-I microscope objective — 100x oil, NA 1.25 (Euromex) iScope IS.7200-I is a 100x oil immersion objective with NA 1.25 and a 0.13 mm working distance, optimised for high-contrast imaging and compatible with darkfield methods 100x oil immersion objective Numerical aperture 1.25 for high resolution Built-in iris diaphragm for contrast control Optimised for darkfield and high-contrast imaging Achieve the highest detail with oil immersion performance The optical design of this objective combines a 100x magnification with a numerical aperture of 1.25, which increases both resolving power and light collection. Used with immersion oil, the lens minimises refraction at the sample interface so that fine structural details become visible that would otherwise remain unresolved. For routine work that demands visual clarity—such as cell morphology, fine structure inspection or materials microstructure—the high NA is the decisive factor for sharper images and improved signal-to-noise. The built-in diaphragm allows precise tuning of contrast without extra accessories, maintaining a compact optical path. Controlled contrast and compatibility with specialised techniques A short working distance (WD 0.13 mm) requires careful handling but enables proximity to the specimen for maximum resolution. The objective features a built-in iris diaphragm, permitting immediate control of aperture and depth of field to balance contrast and sharpness during observation. According to the manufacturer’s specification, the lens is described as Super Contrast PLi oil objective and is expressly noted as suitable for darkfield contrast, making it a reliable choice when contrast-enhancing illumination is required. These properties make the lens versatile across brightfield and darkfield setups while keeping alignment and adjustment straightforward. Reliable optics for laboratory and quality-control environments Engineered by Euromex as part of the iScope series, the lens is intended for precision tasks where image fidelity is essential. The solid optical specification supports reproducible results in both research and industrial inspection settings. Choosing an objective with these characteristics reduces time spent optimising illumination and focus, which in turn streamlines workflows and raises throughput in microscopy tasks. For laboratories seeking consistent, demonstrable improvements in image detail, this objective’s combination of oil immersion, high numerical aperture and integrated contrast control represents a practical performance upgrade. Contact Metav Werkzeuge for expert guidance and availability of the iScope IS.7200-I; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application fit and stock status Technical data Article number: IS.7200-I SKU: IS.7200-I Manufacturer: Euromex Model series: iScope Product type: Microscope objective Facts Magnification: 100x Numerical aperture: 1.25 Working distance (WD): 0.13 mm Special features Oil immersion objective Super Contrast PLi optical design Built-in iris diaphragm Suitable for darkfield contrast FAQ What is the magnification and numerical aperture of this objective? The iScope IS.7200-I is specified as a 100x objective with a numerical aperture of 1.25, offering high resolving power for fine-detail work. Is this objective suitable for darkfield microscopy? Yes. The optical data indicate the lens is suitable for darkfield contrast, and its Super Contrast PLi design supports enhanced contrast techniques. Does the objective require immersion oil, and what does that mean for use? This is an oil immersion objective; immersion oil must be used between the cover slip and the lens to achieve the specified numerical aperture and optimal resolution, and care is required due to the short working distance. What is the working distance and how does it affect handling? The working distance is 0.13 mm (WD 0.13 mm), which positions the front lens very close to the specimen—this maximises resolution but necessitates careful focusing and sample preparation. Which manufacturer and SKU identify this lens? The objective is manufactured by Euromex, product designation iScope IS.7200-I, SKU IS.7200-I. Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Plan Stress-Free PLPOLi 1.25 Oil Immersion Objective 0.13 mm Working Distance, Corrected For 0.17 mm Cover Glass - Euromex
Benefit from high‑resolution 100× imaging, plan stress‑free optics and precise cover‑glass correction for consistent polarisation results; order the objective directly via Metav Werkzeuge or ask the consultants for compatibility advice. Plan stress‑free PLPOLi 100×/1.25 IOS oil immersion objective (IS.7900-T) – Euromex microscope objective The Plan stress‑free PLPOLi 100×/1.25 IOS is an oil‑immersion microscope objective engineered for transmitted‑light polarisation microscopy on iScope systems, offering tight cover‑glass correction and a short working distance for high‑numerical‑aperture imaging 100× oil immersion, NA 1.25 Plan stress‑free optical correction Corrected for 0.17 mm cover glass Exceptional resolution for polarisation applications This oil‑immersion objective delivers high numerical aperture (1.25) combined with 100× magnification, enabling superior resolution and contrast for polarisation studies. The design concentrates light throughput where it matters, allowing clearer visualisation of birefringent structures and fine details in transmitted‑light polarisation. The optical construction reduces image artefacts, so measurements and qualitative observations remain repeatable under routine laboratory conditions. Accurate cover‑glass correction and defined working distance Corrected for a 0.17 mm cover glass and specified with a working distance of 0.13 mm, the lens is optimised to maintain planar focus across the field and to reduce spherical aberration when standard cover slips are used. This correction ensures that focal shifts are minimised during high‑magnification imaging, which supports reliable documentation and quantitative analysis in materials and life‑science polarisation work. Plan, stress‑free optics for low distortion imaging The objective’s plan stress‑free optical formula reduces field curvature and mechanical stress‑induced distortion, producing a flat field across the image circle. Flatness preserves edge detail at high magnifications and simplifies stitching or measurement tasks, making the headroom for post‑processing smaller and the inspection workflow more efficient. The result is consistent image quality from centre to edge, which benefits both visual inspection and automated image analysis. Integration with iScope transmitted‑light polarisation setups Designed specifically for iScope transmitted‑light polarisation configurations, the lens integrates mechanically and optically for straightforward replacement or system expansion. The oil‑immersion specification suits samples requiring high numerical aperture for optimal contrast; immersion oils chosen to match refractive indices will maintain the designed performance. For integration questions or further technical data, Metav Werkzeuge can provide targeted compatibility advice and assistance. Contact Metav Werkzeuge for tailored recommendations on integrating the Euromex PLPOLi 100×/1.25 IOS oil‑immersion objective into measurement and inspection workflows, and to request compatibility guidance for specific iScope configurations Technical Data Manufacturer: Euromex Manufacturer's item number: IS.7900-T Product type: Microscope objective SKU: IS.7900-T Numbers / Core Technical Data Magnification: 100× Numerical aperture: 1.25 Working distance: 0.13 mm Cover glass correction: 0.17 mm Special features / Versions Plan stress‑free optics Oil immersion objective For iScope transmitted‑light polarisation High‑resolution imaging for polarisation studies FAQ What is the intended application for this objective? The Plan stress‑free PLPOLi 100×/1.25 IOS is intended for transmitted‑light polarisation microscopy on iScope systems, providing high‑resolution oil‑immersion imaging for polarisation contrast studies. Is the objective corrected for a standard cover glass? Yes, the Euromex PLPOLi 100×/1.25 IOS objective is corrected for a 0.17 mm cover glass while maintaining a working distance of 0.13 mm. Does this objective require immersion oil to achieve specified performance? The objective is an oil‑immersion type and achieves its designed numerical aperture and resolution when used with an appropriate immersion oil. Is the lens suitable for quantitative image analysis? The plan stress‑free design and flat‑field correction support consistent imaging across the field, making the objective suitable for quantitative measurements and reliable documentation (Euromex IS.7900-T). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x S100x/1.25 Oil-Immersion PLi Objective WD 0.3 mm, NA 1.25 - Euromex
Data inconsistency detected: the manufacturer "Euromex" is not listed in the supplied manufacturer directory. Please provide a manufacturer from the approved list or correct the product data so a product description can be generated, as accurate and consistent information is essential for ensuring that the product details align with the approved standards and meet the necessary requirements for proper documentation and processing within the system, avoiding potential errors or delays that could arise from discrepancies in the provided data, which might otherwise hinder the smooth operation of inventory management, product cataloguing, or other related processes that depend on reliable and verified manufacturer information.
104mm Trinocular 45° Stereomicroscope Head 7–45x Zoom 32–5.1mm Field, 0.7–4.5x Objective - Euromex
Take advantage of the combination of precise magnification, a comfortable working distance and a documentation-ready trinocular design for efficient inspection workflows; order via Metav Werkzeuge or consult our specialists for accessory compatibility. Z-Series ZE.1657 Trinocular Stereo Microscope Head — 7–45x Zoom by Euromex The Z-Series ZE.1657 is a modular trinocular stereo microscope head designed for visual inspection and imaging tasks in laboratories and quality control environments. Zoom 0.7–4.5x optical system Magnification 7–45x for versatile inspection Trinocular 45° head with ±6 dioptre adjustment Precise, adjustable magnification for varied inspection tasks The optical zoom 0.7–4.5x and the resulting magnification 7–45x deliver a flexible range suitable for everything from coarse assembly checks to detailed surface inspection. The available field of view of 32–5.1 mm helps to quickly assess larger areas or focus on fine features without swapping objectives. This adaptability reduces setup time and supports faster decision making on the production line, while the optical specification maintains clarity across the entire zoom range. Ergonomic viewing and reliable documentation capability A trinocular 45° head with SWF 10x/23 mm eyepieces provides comfortable observation, while the dioptre ±6 dioptre adjustment and pupillary distance 55–75 mm accommodate a variety of operators and reduce eye strain during long inspection sessions. The head is modular, so a phototube can be integrated; when the phototube is active the image remains visible in both eyepieces, enabling simultaneous viewing and imaging for documentation or traceability. This combination supports consistent results and easier training of staff. Generous working distance and practical integration into workflows With a working distance of 104 mm, the head offers clearance for manipulators, measuring probes or small tooling beneath the objective, simplifying measurement and rework without compromising optical performance. The modular construction means the head pairs with a selected stand (sold separately) and specific camera adapters; certain accessories such as AE.5025 and AE.5040 require an additional SLR adapter and the camera bayonet must be observed. The clear specification of accessories and interfaces supports reliable integration into existing inspection setups and digital documentation workflows. Contact Metav Werkzeuge for specification checks and to source the Euromex Z-Series ZE.1657 with the right accessories for the application, directly from Emmerich. Technical data Article number: ZE.1657 Brand: Euromex Product type: Trinocular stereo microscope head Model series: Z-Series Facts Magnification: 7–45x Zoom: 0.7–4.5x Working distance: 104 mm Field of view: 32–5.1 mm Dioptre adjustment: ±6 Pupillary distance: 55–75 mm Special features Trinocular, 45° microscope head SWF 10x/23 mm eyepieces, without eyecups Modular head — stand to be selected separately Phototube active: image remains visible in both eyepieces Accessory notes: AE.5025 / AE.5040 require additional SLR adapter; camera bayonet must be observed Photo adapters DC.1320, DC.1324, DC.1326 require photo connection and specified sensor size FAQ What magnification range does this stereo head cover? The Z-Series ZE.1657 covers a magnification range of 7–45x, achieved via a zoom 0.7–4.5x optical system suitable for variable inspection needs. Is the head suitable for imaging and documentation? Yes. The trinocular design allows a phototube to be fitted and the Z-Series ZE.1657 keeps the eyepiece view active when the phototube is used, enabling simultaneous observation and image capture. What eyepieces are supplied with the head? The head is supplied with SWF 10x/23 mm eyepieces (without eyecups), providing a comfortable wide-field view for detailed inspection. Does the head include a stand or base? The optical head is modular and requires a separately selected stand; appropriate stands and mounting options should be chosen to match the intended workflow. Are there any special adapter requirements for SLR cameras? Certain accessories (AE.5025, AE.5040) require an additional SLR photo adapter and the camera bayonet must be observed; other photo options list specific sensor-size requirements (DC.1320, DC.1324, DC.1326). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm 0.75x Auxiliary Lens For Zoom Stereomicroscopes, 0.75x Magnification - Euromex
Take advantage of reduced magnification and a wider field of view through the combination of 0.75× reduction and an AA 105 mm aperture for smoother visual inspection workflows; order the accessory directly via Metav Werkzeuge or consult the specialists for compatibility guidance. Euromex 0.75× Attachment Lens for Zoom Stereomicroscopes — AA 105 mm Euromex 0.75× attachment lens for zoom stereomicroscopes, designed to lower overall magnification and expand the usable field for inspection and assembly tasks 0.75× magnification for zoom models Aperture AA 105 mm increases field of view Compatible with stereomicroscopes Ideal for inspection and overview work Wider overview for faster inspection The 0.75× attachment lens reduces the native magnification of zoom optics, delivering a noticeably wider field of view that speeds up visual inspections and component alignment. With an AA 105 mm front aperture, the optical arrangement provides an increased viewing area so operators benefit from faster orientation and fewer lens swaps. This practical reduction in magnification is particularly useful in quality control and assembly processes where quick overview scanning precedes detailed inspection. Seamless integration with zoom stereo optics Engineered for use with zoom models of stereomicroscopes, the accessory lens is intended to be mounted ahead of the microscope’s existing objective train to alter the system magnification while preserving optical balance. The reduction factor is consistent across the zoom range so image proportions remain predictable during adjustments. For workshop and laboratory environments, the solution simplifies inspection routines by adapting existing zoom heads to tasks that require broader coverage rather than higher detail. Practical benefits for everyday lab and workshop tasks Optical attachments such as this lens support a more efficient workflow: broader views reduce time spent repositioning samples and improve the throughput of repetitive checks. The product carries the Euromex designation and is suitable wherever stereomicroscope zooms are used for visual inspection, training or initial component sorting. Purchase and procurement are backed by a transparent supply chain from Metav Werkzeuge, which serves as a quality filter for European distribution and helps ensure consistent product availability. Contact Metav Werkzeuge for compatibility advice on integrating the Euromex 0.75× attachment lens with existing stereo zoom microscopes and to arrange procurement via our Emmerich distribution centre Technical data Article number: SB.8907 SKU: SB.8907 Brand: Euromex Product type: Microscope attachment lens Core specifications Magnification: 0.75× Aperture (AA): 105 mm Intended application: For stereomicroscopes (zoom models) Materials & features Label: Vorsatzlinse 0.75x für Zoommodelle. AA 105 mm SB.8907 Image file: SB.8907.jpg Category: For stereomicroscopes FAQ What change in magnification does the attachment lens provide? The Euromex 0.75× attachment lens reduces the system magnification to 0.75 times the original, giving a wider field of view and easier specimen orientation. Which microscopes is this lens intended for? This accessory is intended for zoom models of stereomicroscopes and is specified for use where a larger field of view is required. Does the AA 105 mm specification affect the visible area? Yes. The AA 105 mm aperture corresponds to the front aperture dimension and contributes to a larger usable viewing area when the attachment lens is fitted. Will image proportions remain consistent across the zoom range? The reduction factor provided by the attachment lens is designed to be uniform across the zoom range, maintaining predictable image proportions during magnification changes. How should the lens be maintained to preserve optical clarity? Routine cleaning with suitable optical cleaning fluids and lint-free tissues is recommended; the Euromex attachment lens should be stored in a protective case when not in use to prevent dust and damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm 0.75x Auxiliary Lens Working Distance 105mm, For Stereo Microscopes - Euromex
Benefit from the combination of 0.75x magnification and a 105 mm working distance to inspect larger specimens with comfortable access; order the NZ.8907 directly via Metav Werkzeuge or consult their specialists for compatibility and supply. NZ.8907 0.75x Auxiliary Lens — 105 mm working distance for stereo microscopes (Euromex) The NZ.8907 is an auxiliary lens for stereo microscopes that reduces magnification to increase the field of view while maintaining a 105 mm working distance for unobstructed specimen handling. 0.75x magnification for a larger field of view 105 mm working distance for easy specimen access Designed for stereo microscopes, Euromex compatibility Compact auxiliary lens with simple attachment Wider field of view improves inspection throughput The 0.75x attachment lens provides a deliberate reduction in magnification to expand the visible area, which directly increases inspection efficiency in repetitive tasks. By trading a portion of magnification for a broader field of view, operators can examine larger sample areas without frequent repositioning, thus shortening cycle times and reducing handling overhead. The optical adjustment is particularly useful in quality control stations and assembly lines where rapid orientation and assessment of components are required, delivering clear productivity benefits without complex reconfiguration. Comfortable working distance for assembly and manipulation A working distance of 105 mm offers practical clearance for tools, probes and manual intervention beneath the optic. This space facilitates ergonomic handling and contributes to safer, more precise work during repair, soldering or fixture alignment. The increased distance also reduces the risk of accidental contact with delicate samples and supports the integration of auxiliary tools such as lighting arms or measuring probes. The result is a reliable balance between magnification and accessibility that suits both bench-top inspection and light production environments. Straightforward integration with stereo microscope systems Engineered as an accessory for stereo microscopes, this auxiliary lens is built to integrate smoothly into existing optical setups from Euromex and compatible systems. The design simplifies swapping between standard eyepiece configurations and the attachment, lowering downtime and minimising the need for additional lenses. Optically, the attachment preserves image quality while adapting the working geometry, enabling a cost-effective route to expand capability without investing in a complete new microscope. Technical teams will appreciate the uncomplicated upgrade path for multiple inspection stations. Contact Metav Werkzeuge for tailored advice and secure supply of the Euromex NZ.8907 — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: NZ.8907 SKU: NZ.8907 Manufacturer: Euromex Product type: Microscope auxiliary lens Core specifications Magnification: 0.75x Working distance: 105 mm Special features For stereo microscopes Attachment lens for wider field of view Gallery image available FAQ What effect does the 0.75x auxiliary lens have on magnification and field of view? The NZ.8907 reduces system magnification by a factor of 0.75, which widens the visible area and allows inspection of larger sample regions with fewer repositions. Is the NZ.8907 compatible with all stereo microscope brands? The auxiliary lens is designed for use with stereo microscopes and is compatible with Euromex systems; compatibility with other brands depends on the optical mount and should be verified prior to purchase. How does the 105 mm working distance benefit workshop tasks? A 105 mm working distance gives ample clearance for manual manipulation, fixturing and tool access beneath the objective, improving ergonomics and reducing the risk of contact with specimens. Can the auxiliary lens be used for precision measurement tasks? While the attachment improves visual coverage and handling, measurement accuracy depends on the full optical configuration; the NZ.8907 supports inspection work but measurement routines should be validated with the final microscope setup. What maintenance is required for the attachment lens? Routine care involves careful cleaning of optical surfaces with appropriate lens tissue and cleaning fluid and protecting the lens from dust when not in use; Euromex accessories generally require minimal maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm 10x Objective 0.25 NA 2.04mm Working Distance - Euromex
Take advantage of the combination of precise optics, a short working distance and proven Euromex build quality for reliable close‑up microscopy; order via Metav Werkzeuge or contact our consultants for application advice. BioBlue.Lab BB.8810 microscope objective — 10x, NA 0.25 (Euromex) The BioBlue.Lab BB.8810 is a microscope objective optimised for life‑science and educational microscopy, offering compact optics that support clear, repeatable results in routine laboratory workflows 10x optical magnification Numerical aperture 0.25 for resolution Working distance 2.04 mm for close focus Euromex BioBlue.Lab series quality Consistent close‑up imaging for routine laboratory work The BioBlue.Lab BB.8810 objective delivers tenfold magnification with design priorities aimed at reproducibility and ease of use in teaching labs and basic life‑science applications. The combination of numerical aperture 0.25 and consistent optical alignment supports improved contrast and detail compared with lower‑NA optics, which translates into fewer retakes and faster sample throughput. As a compact optical module from Euromex, the lens is engineered for dependable day‑to‑day performance when working with stained slides, fixed preparations and common live samples. Why numerical aperture and working distance matter for results A higher numerical aperture increases the objective's ability to gather light and resolve fine detail; at 0.25 this objective balances resolution and depth of field for many routine tasks. The specified working distance of 2.04 mm is short, enabling close focus on coverslipped specimens and thicker mounts; this benefits applications that require high lateral resolution but do not need large clearance between sample and front lens. Understanding these optical parameters helps select the correct lens for a given workflow and reduces time spent on iterative adjustments. Designed to fit educational and life‑science setups This lens is part of a series intended for microscopes used in classrooms and standard laboratory benches, where robustness and reproducibility are key. The optical performance described supports clear demonstration imaging and documentation, while the mechanical design prioritises repeatable positioning on common objective turrets. For technicians and instructors, the BB.8810 lens provides a reliable balance of magnification and usability, reducing interruptions in teaching sessions and routine analyses. Practical integration and handling advantages Integration into an existing microscope is straightforward when the optical specifications match the instrument's tube length and parfocal standards. The objective's attributes make it suitable for quick swapping between magnifications during sample inspection, and its specification sheet cites educational and life‑science sources for reference. For operations requiring predictable imaging without specialised objectives, this Euromex module offers a practical compromise of performance, handling and clear specification. For hands‑on advice on how the Euromex BioBlue.Lab BB.8810 objective fits specific microscopes and workflows, contact Metav Werkzeuge — our consultants in Emmerich provide application guidance and can arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BB.8810 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope objective SKU: BB.8810 Facts Magnification: 10x Working distance: 2.04 mm Numerical aperture: 0.25 Special features PL objective designation (10x/0.25 PL objective) Intended application: Life science, education (source: Education PDF S.16; Life Science PDF S.12) Compact optical design for close focus FAQ What magnification does this objective provide? The objective provides tenfold magnification; the Euromex BioBlue.Lab BB.8810 is specified as a 10x microscope objective (SKU BB.8810). How close can the lens focus to the specimen? The working distance is 2.04 mm, which allows close focus on coverslipped slides and thicker mounts while maintaining the specified optical performance of the BB.8810. What does a numerical aperture of 0.25 mean for imaging? A numerical aperture of 0.25 increases light collection and lateral resolution compared with lower‑NA objectives; in practical terms, this improves detail and contrast for routine laboratory samples when using the Euromex objective. Is this objective suitable for teaching laboratories? Yes, the BioBlue.Lab BB.8810 is designed for life‑science and educational microscopy, offering a robust balance of magnification, resolution and handling for classroom and bench use. Can this objective be used for live‑cell observation? The optical specification supports many standard live‑cell preparations, especially where short working distance and moderate magnification are appropriate; confirm compatibility with the microscope and sample mounting method before use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm EWF Extra Wide Field 10x/22 Eyepiece, 10x Magnification - Euromex
Benefit from 10x magnification combined with an extra wide 22 mm field to accelerate inspections and reduce rework; compatible with DZ-series stereomicroscopes and supplied as a single unit. Order this precision optical accessory directly via Metav Werkzeuge or consult our specialists for integration advice. EWF Extra Wide Field 10x/22 Eyepiece DZ.3010 — Euromex stereomicroscope eyepiece with 22 mm field An EWF Extra Wide Field 10x/22 eyepiece engineered for DZ-series stereomicroscopes to expand the observable area and improve visual throughput during component inspection and assembly tasks. Extra wide 22 mm field of view 10x magnification for detailed inspection Compatible with DZ series stereomicroscopes Wider view that speeds inspection and reduces errors The extra wide field design enlarges the observable area while maintaining sharpness at the edges, allowing operators to monitor larger sample regions at once. With 10x magnification the eyepiece balances detail and context, which reduces the need for frequent refocusing and repositioning. Fewer microscope adjustments translate into shorter cycle times for repetitive visual tasks and a lower risk of overlooking critical features during quality control. Simple integration with existing stereo optics Built for compatibility with the DZ series, the eyepiece is intended to slot into existing stereo heads without major adjustments, providing a straightforward upgrade path for inspection stations. The optical accessory is suited to routine workshop and laboratory environments where reliable repeatability matters; its wide apparent field supports ergonomic viewing and reduces operator fatigue during long inspection sessions. Clear physical fit means minimal downtime during replacement. Trusted optical quality and workshop-level reliability Optical performance from a recognised brand supports consistent outcomes in measurement and inspection workflows. The eyepiece’s design emphasises stable imaging and reproducible visual checks, contributing to improved process control and fewer non-conformances. For procurement and stocking, Metav Werkzeuge combines broad availability with sector expertise and a transparent supply chain—backed by a wide product range and longstanding customer trust—so that precision optics are accessible to workshop and industrial users alike. For procurement, technical details and supply of the Euromex EWF Extra Wide Field 10x/22 eyepiece, contact Metav Werkzeuge for tailored advice and fast delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.3010 SKU: DZ.3010 Manufacturer: Euromex Product type: Microscope eyepiece Packaging: 1 piece Facts Magnification: 10x Field designation: 22 mm Special features Extra wide field (EWF) design Compatible with DZ series stereomicroscopes Single eyepiece supplied Brand: Euromex FAQ What magnification does the eyepiece provide? The Euromex EWF Extra Wide Field 10x/22 eyepiece provides 10x magnification for balanced detail and overview. Is this eyepiece compatible with all stereomicroscopes? Compatibility is specified for the DZ series stereomicroscopes; compatibility with other models depends on eyepiece tube dimensions and should be checked before fitting. How does the extra wide field benefit inspection tasks? An extra wide 22 mm field increases the visible area per view, reducing the need for frequent stage movement and helping to spot defects more quickly during visual inspection. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm iScope IS.7210 Microscope Objective 10x/0.25 NA, WD 10 mm - Euromex
Take advantage of the microscope objective's combination of precise 10x magnification, well‑balanced numerical aperture (0.25) and a practical working distance of 10 mm for reliable routine imaging. Order or request further application advice via Metav Werkzeuge for rapid delivery and expert consultancy. Microscope objective iScope IS.7210 — 10x / 0.25 NA, 10 mm working distance The iScope IS.7210 is a compact microscope objective designed for general microscopy tasks in education and life‑science settings, offering a balance of magnification, resolution and handling space. High‑contrast 10x imaging 10 mm working distance for sample access Numerical aperture 0.25 for reliable resolution Consistent image quality for routine observation The objective’s 10x magnification combined with a numerical aperture (0.25) delivers a clear improvement in resolution and light‑gathering compared with lower‑NA optics, enabling sharper contrast and more reproducible observations in standard brightfield setups. The role of the numerical aperture is explained in practical terms: a higher NA captures more diffracted light from the specimen, which leads to improved lateral resolution and better detail in cellular and tissue samples. This makes the objective suitable for teaching laboratories and basic life‑science workflows where dependable optical performance is required without complex alignment procedures. Easier sample handling and preparation thanks to a 10 mm working distance A working distance of 10 mm provides comfortable access to slides and modestly thick specimens, allowing routine manipulations—such as sample mounting, probe positioning or staining—without frequent objective changes. The optical design noted as an IOS PLi objective in the product literature keeps the objective compact while maintaining flat field performance, which reduces the need for repeated focusing across the central field of view. These characteristics support a smoother workflow in practical environments such as classroom benches, inspection stations and basic research rigs. Practical integration and dependable day‑to‑day performance Designed for use with standard microscope systems, the objective supports straightforward replacement and consistent imaging across sessions. The construction targets low maintenance and repeatable results, which enhances throughput in repetitive tasks such as routine inspections and instructional demonstrations. The combination of consistent imaging and low maintenance helps laboratories and technical training centres maintain a steady workflow with minimal optical intervention, making the objective a pragmatic choice where stability and clarity matter. For tailored advice on integrating the iScope IS.7210 into existing microscope setups or to arrange purchase and delivery, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt application support and logistics coordination. Technical Data Article number: IS.7210 SKU: IS.7210 Series: iScope Product type: Microscope objective Brand: Euromex Facts Magnification: 10x Working distance: 10 mm Numerical aperture: 0.25 Special features 10x/0.25 IOS PLi objective per product literature Category: For microscopes (microscopy accessory) Sources referenced: Education PDF; Life Science PDF FAQ What level of detail can be expected with this objective? The iScope IS.7210 provides reliable detail at 10x magnification; with its numerical aperture of 0.25 it improves contrast and resolution for routine observations in education and basic life‑science applications. Is the working distance sufficient for sample manipulation? Yes, the 10 mm working distance allows comfortable access for slide handling and simple manipulations without frequent objective changes, as specified for the IS.7210. Which application areas are suitable for this objective? The objective is described in education and life‑science materials and is therefore suited to teaching labs, general biological observation and basic inspection tasks. Does the product require special maintenance? No specialised maintenance is indicated; the objective is designed for low maintenance and consistent imaging under routine laboratory conditions. Where can one get further technical documentation? Further product details and technical sheets referenced in the product literature (Education and Life Science PDFs) are available on request; contact Metav Werkzeuge for the IS.7210 documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Pair WF Eyepieces 20x Widefield, 10 mm Field - Euromex
Take advantage of the combination of 20x magnification and a 10 mm field of view to speed up visual inspection and reduce refocusing time; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. SB.6020 Wide-field 20x / 10 mm Eyepiece Pair for stereo microscopes — Euromex The SB.6020 pair of wide-field eyepieces increases visible detail and sample coverage for stereo microscopes used in inspection, quality control and laboratory tasks. Wide-field WF design for expanded view 20× magnification for detailed inspection 10 mm field of view for larger sample coverage Pair for stereo microscope use Greater detail without losing context The 20x magnification of these eyepieces delivers noticeably finer visual resolution for repeatable inspection tasks, while the 10 mm field of view preserves contextual surroundings of the specimen. The wide-field designation (WF) means the optics are designed to present a broader image circle compared with standard eyepieces, which reduces the need to pan across samples and thus increases throughput during routine checks. This combination supports faster, more reliable decision-making in production and laboratory environments. Built for consistent stereo inspection workflows Supplied as a matched pair, the eyepieces ensure symmetrical visual performance for stereo microscope setups, maintaining comfortable binocular observation and facilitating comparison work. The optical arrangement focuses on providing clear image geometry and an expanded viewing area, reducing the frequency of repositioning parts under the objective. For users in quality control, research or education, this translates into steadier inspection outcomes and less operator fatigue during extended sessions. Simple upgrade path for existing stereomicroscopes Designed for use with stereomicroscopes, the eyepiece pair offers a practical upgrade option where increased magnification and a wider field are required. Integration is straightforward when the instrument accepts standard wide-field eyepieces used for stereomicroscopy, making the changeover efficient and causing minimal downtime. If compatibility questions arise, technical advice is available to confirm fitment and expected visual performance before procurement. Contact Metav Werkzeuge for ordering details, compatibility checks and delivery from Emmerich — expert assistance is available by phone or e‑mail to support specification and supply. Technical data Article number: SB.6020 Manufacturer: Euromex Product type: microscope eyepiece pair Facts Magnification: 20x Field of view: 10 mm Special features Wide-field (WF) design Supplied as a pair for stereo microscopes Image available: SB.6020.jpg FAQ What magnification do these eyepieces provide? The SB.6020 eyepiece pair delivers 20x magnification, suitable for detailed visual inspection tasks with stereo microscopes. What is the field of view and why does it matter? The field of view is 10 mm, which increases the visible sample area and reduces the need for frequent specimen repositioning during inspection. Are these eyepieces suitable for stereomicroscopes? Yes, the SB.6020 units are supplied as a matched pair and are intended for use with stereomicroscopes, improving binocular observation consistency. Do the eyepieces come with optical coatings or specifications? The product data specifies the wide-field (WF) design and core optical values; for detailed coating information, consult technical documentation or contact Metav Werkzeuge for clarification. Can the SB.6020 pair be used to upgrade existing microscope setups? The SB.6020 eyepiece pair is intended as an upgrade where wider field and higher magnification are required; compatibility checks are recommended prior to installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com