10mm Plan PLMi 10x/0.25 IOS Infinity-Corrected Objective No Cover Glass Correction - Euromex
Take advantage of flat-field plan optics, infinity correction and a practical 10 mm working distance for reliable inspection and imaging. Order via Metav Werkzeuge for fast, Europe-wide supply or consult Metav’s specialists for configuration advice. Euromex Plan PLMi 10x/0.25 IOS objective (IS.8110) – infinite‑corrected, 10 mm working distance The Plan PLMi 10x/0.25 IOS objective is a microscope objective designed for infinity‑corrected optical systems, delivering 10× magnification with a long working distance for industrial inspection and routine microscopy Plan optics for flat field imaging 10× magnification with 0.25 numerical aperture Infinity‑corrected design for modern microscopes 10 mm working distance, no cover glass correction Consistent image quality for inspection and documentation This objective combines plan-corrected optics with an infinity‑corrected design, resulting in a flat image field and reduced optical aberrations across the field of view. The 0.25 numerical aperture balances depth of field and resolution, making the lens suitable for visual inspection, sample documentation and measurements where even illumination and sharp edge definition are important. The optical correction reduces the need for extensive post‑processing of images, which supports faster throughput in quality control workflows and more reliable results in routine microscopy tasks. Practical handling: working distance and specimen freedom A 10 mm working distance permits comfortable access to samples and fixtures beneath the objective while maintaining image sharpness. Because the lens has no cover glass correction, it is particularly appropriate for bare or unmounted specimens, rough surfaces and applications where cover slips are not used. The absence of cover glass correction removes a layer of optical uncertainty when examining thicker or uneven materials, simplifying set‑up and reducing the need for additional sample preparation in many industrial and inspection scenarios. Integration, compatibility and assured supply The objective’s infinite‑corrected specification ensures compatibility with contemporary tube lenses and modular microscope systems, enabling straightforward integration into inspection rigs, stereo microscopes adapted for infinity optics, or imaging chains with camera adapters. As part of a structured supply chain, acquisition through Metav Werkzeuge gives access to a broad product range and logistics tailored to workshops and laboratories. Metav’s quality filter in Emmerich supports dependable availability and consistent standards across deliveries; technical questions and requests for further optical data can be directed to Metav’s consultants for prompt clarification. For precise optical performance and reliable delivery of the Plan PLMi 10x/0.25 IOS objective, order through Metav Werkzeuge or contact Metav’s experts at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and compatibility checks Technical Data Article number: IS.8110 Manufacturer: Euromex Product type: microscope objective SKU: IS.8110 Facts Magnification: 10x Numerical aperture: 0.25 Working distance: 10 mm Correction: Infinity‑corrected Cover glass correction: none Special features Plan PLMi optics for flat field imaging IOS designation No cover glass correction (suitable for uncovered specimens) Intended for infinity‑corrected microscope systems FAQ What magnification and numerical aperture does this objective provide? The objective offers 10x magnification with a 0.25 numerical aperture, providing a balanced combination of resolution and depth of field for inspection tasks. Is this lens suitable for use without a cover slip? Yes. The Plan PLMi 10x/0.25 IOS objective is specified with no cover glass correction, making it suitable for bare or uneven specimens where cover slips are not used. Can the objective be used with modern infinity‑corrected microscopes? Yes. The lens is infinity‑corrected, designed to work with tube lenses and modular optical systems that follow the infinity optical principle. Which applications benefit most from this objective? Typical uses include industrial inspection, materials examination and routine microscopy where a flat field and convenient working distance are priorities. Is technical support available for integration and configuration? Technical advice and compatibility checks can be provided by Metav Werkzeuge; the product is offered through their supply and advisory channels. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Plan Stress-Free PLPOLi 10x/0.25 IOS Transmitted Light Polarising Objective, No Cover Glass Correction - Euromex
Take advantage of the combination of precise polarisation imaging, a generous working distance and plan, stress‑free optics for reliable transmitted‑light inspections. Order the objective directly via Metav Werkzeuge or consult our technical team for tailored integration advice. Plan stress‑free PLPOLi 10x/0.25 IOS objective IS.7910‑T — 10×, 10 mm working distance (Euromex) The Plan stress‑free PLPOLi 10x/0.25 IOS objective IS.7910‑T is a specialised microscope objective for transmitted‑light polarisation work on iScope systems, offering 10× magnification with a 10 mm working distance and no cover‑glass correction. Plan, stress‑free optics for flat field 10× magnification with 0.25 numerical aperture 10 mm working distance for thick specimens Compatible with iScope transmitted‑light polarisation Uniform, distortion‑free imaging for polarisation analysis The plan, stress‑free optical design delivers a flat field across the image, which results in consistent illumination and reduced field curvature when evaluating birefringent or anisotropic materials. For quality control and materials research, a flat imaging plane reduces the need for frequent refocusing and ensures measurements or visual comparisons remain reliable across the full field of view. In practical terms, this means fewer rescans and a more efficient inspection workflow when analysing structures under polarised light. Secure handling of bulk or thicker samples thanks to 10 mm clearance A 10 mm working distance provides ample clearance between the specimen and the objective, enabling the inspection of thicker sections, mounted samples or small components without risking contact damage. The absence of cover‑glass correction (no cover‑glass correction) simplifies the optical path for direct‑mounted or surface specimens and avoids misleading aberrations introduced by mismatched cover slip thicknesses. This configuration is particularly useful for technicians who process variable sample formats or for production lines where rapid sample changeover is required. Straightforward integration into iScope polarisation setups Designed for use with iScope transmitted‑light polarisation systems, the Euromex IS.7910‑T objective combines a 10×/0.25 specification with polarisation optimised optics to support contrast enhancement and texture visualisation. The 0.25 numerical aperture balances depth of field and resolving power, delivering clear structural detail without extensive illumination adjustments. Engineers and laboratory staff will appreciate the familiar mounting and the compatibility that reduces system setup time, while maintenance remains uncomplicated due to the objective's robust mechanical design and stable optical alignment. For personalised technical advice on the Euromex Plan PLPOLi 10× objective or to confirm compatibility with a specific iScope configuration, contact Metav Werkzeuge — specialist support and fast supply from Emmerich is available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.7910‑T Manufacturer: Euromex Product type: microscope objective Data Magnification: 10× Numerical aperture: 0.25 Working distance: 10 mm Special features Plan, stress‑free optical design For iScope transmitted‑light polarisation No cover‑glass correction FAQ What magnification and numerical aperture does this objective provide? The Euromex Plan PLPOLi 10× objective (IS.7910‑T) provides 10× magnification with a 0.25 numerical aperture, optimised for transmitted‑light polarisation work. Is the objective suitable for samples without a cover glass? Yes. The objective is specified with no cover‑glass correction, making the IS.7910‑T appropriate for direct‑mounted or thicker specimens. Can this objective be used on any iScope transmitted‑light system? Compatibility is intended for iScope transmitted‑light polarisation configurations; the Euromex IS.7910‑T follows common mechanical and optical standards for straightforward integration. Does the objective allow inspection of bulky components or mounted sections? The 10 mm working distance gives sufficient clearance for thicker samples and reduces the risk of accidental contact during handling. Who to contact for technical questions or ordering? For detailed compatibility checks and supply, Metav Werkzeuge can advise on the Euromex IS.7910‑T and provide procurement support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x 0.25 Microscope Objective 10x/0.25 NA, MicroBlue MB.7010 - Euromex
Benefit from precise, bright imaging with 10x magnification and a numerical aperture of 0.25 for dependable routine observations; combine optical performance and straightforward integration for consistent results and order the Euromex MicroBlue MB.7010 directly via Metav Werkzeuge or consult our specialists for technical clarification. Euromex MicroBlue MB.7010 microscope objective — 10x / NA 0.25 The MicroBlue MB.7010 is a 10x microscope objective designed for everyday laboratory imaging, teaching and general inspection tasks, offering a balance of magnification and light-gathering power for clear, reproducible images. Bright 10x magnification Numerical aperture 0.25 for sharp detail Suitable for routine laboratory use Compatible with standard microscope systems Consistent optical performance for routine imaging The MB.7010 delivers 10x magnification combined with a numerical aperture of 0.25, a pairing that ensures reliable contrast and sufficient resolving power for many common microscopy tasks. The numerical aperture describes the objective’s ability to gather light and resolve fine detail; at NA 0.25 this objective provides a practical compromise between brightness and depth of field, which is particularly useful when working with biological slides, quality-control samples or educational preparations. The optical characteristics support reproducible results across repeated observations, aiding process stability in teaching labs and production environments. Easy integration and practical advantages in the workflow Engineered as part of the MicroBlue series, this objective fits into standard microscope nosepieces and integrates smoothly into existing optical setups. The combination of 10x magnification and NA 0.25 reduces the need for frequent illumination adjustments, improving throughput when scanning multiple specimens or performing routine inspections. For technicians and educators, the straightforward optical behaviour minimises training time and supports efficient sample handling, while maintaining image clarity sufficient for documentation and basic measurements. Why precision partners include this objective in their toolkit Selection of a dependable objective is a practical decision driven by repeatability and serviceability. The MB.7010 offers stable imaging characteristics that contribute to process reliability and reduce rework caused by inconsistent optics. As part of a broader commitment to accessible precision, Metav supplies such optical components to help laboratories and workshops standardise on proven equipment. The objective’s design addresses core operational needs—consistent image quality and straightforward compatibility—so teams can focus on analysis rather than equipment variation. For procurement or technical guidance on the Euromex MicroBlue MB.7010, contact Metav Werkzeuge for expert advice and secure supply from Emmerich. Technical Data Article number: MB.7010 Brand: Euromex Model series: MicroBlue Product type: microscope objective SKU: MB.7010 Optical specifications Magnification: 10x Numerical aperture: 0.25 Objective designation: 10x/0.25 Features and compatibility Intended for microscopes (microscopy accessory — objectives) Source: Education PDF — S. 7 Series: MicroBlue FAQ What magnification does this objective provide? The objective offers 10x magnification, which is suitable for general observation, teaching and many inspection tasks. What does a numerical aperture of 0.25 mean for image quality? A numerical aperture (NA) of 0.25 indicates moderate light-gathering ability and resolving power; the MB.7010 balances brightness and depth of field for reproducible routine imaging. Is the MB.7010 compatible with standard microscope turrets? Yes, the MicroBlue MB.7010 is designed for standard microscope nosepieces and integrates into common turret arrangements used in teaching and inspection microscopes. For which applications is this objective most suitable? The objective is aimed at routine laboratory work, educational use and general quality-control inspections where reliable, moderate magnification and consistent illumination are required. Where can technical verification of specifications be found? Specification details such as 10x/0.25 are documented in the Education PDF (page 7) referenced for the MicroBlue MB.7010. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x 0.25 Objective 10.2mm Working Distance, PLi - Euromex
Data inconsistency: the product specifies "Euromex" as the manufacturer, but this name does not appear in the approved manufacturer list and no full address or responsible-party details are available. Please provide a manufacturer entry from the supplied list or supply the complete manufacturer and responsible‑party details so a compliant product description can be produced, ensuring that all necessary information is accurate, up-to-date, and aligns with regulatory requirements to avoid potential delays or issues in processing, approval, or distribution, as incomplete or incorrect data can lead to complications in verifying the legitimacy and compliance of the product in question.
10x 20mm EWF Eyepiece With 10/100 Micrometer And Cross – Euromex
Take advantage of precise, calibrated observation and a wide viewing field for faster inspection workflows; the integrated 10/100 micrometer and cross reticle support direct measurement while the 10x magnification with a 20 mm field number improves inspection speed. Order the eyepiece directly via Metav Werkzeuge or ask our consultants for tailored technical advice. iScope IS.6010-CM microscope eyepiece — 10x magnification, 20 mm field number (Euromex) An iScope IS.6010-CM microscope eyepiece designed for measurement and inspection tasks, combining a clear wide field with an integrated micrometer reticle. 10× magnification for detailed inspection 20 mm field number for wide view Integrated 10/100 micrometer and reticle cross Calibrated measurement without extra tooling The eyepiece is supplied with an integrated 10/100 micrometer and a cross reticle, enabling direct, calibrated readings at eyepiece level. This design removes the need for repeated stage calibration when quick comparative measurements are required, supporting faster decision-making on the bench. As a measurement eyepiece, it is particularly useful where traceable, repeatable visual quantification is needed; the reticle provides a consistent reference that is compatible with common optical measurement procedures. The built-in scale reduces handling time and lowers the risk of interpretation errors during routine inspections. Wide field for efficient sample assessment With a 20 mm field number, the eyepiece offers an extensive apparent field; at 10x magnification this corresponds to a real field of view of 2 mm, allowing more of the specimen to be seen without moving the stage. The Extra Wide Field (EWF) characteristic helps users scan samples faster and reduces eye strain during extended use. For educational and life-science settings, a larger view expedites teaching and documentation tasks, while in industrial inspection the benefit is fewer repositioning actions and improved throughput per operator. Practical compatibility and workshop advantages The instrument is part of the iScope series, crafted for integration into standard optical setups used in education and laboratory environments. The eyepiece’s combination of a wide field and a calibrated reticle supports both qualitative observation and quantitative checks, making it a versatile accessory for microscopes where measurement and documentation are required. Specification references are available in the Education and Life Science product PDFs (Education PDF S.24; Life Science PDF S.16), which document the EWF 10x/20 mm configuration and the included reticle. For bespoke system matching or confirmation of mechanical fit, further clarification can be provided by the distributor’s technical advisors. For workshop-ready measurement capability and reliable supply, contact Metav Werkzeuge for direct procurement or technical consultation from Emmerich – info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: IS.6010-CM SKU: IS.6010-CM Brand: Euromex Series: iScope Product type: microscope eyepiece Data Magnification: 10x Field number: 20 mm Special features EWF (Extra Wide Field) 10x/20 mm eyepiece Integrated 10/100 micrometer Cross reticle Source: Education PDF S.24; Life Science PDF S.16 FAQ What measurement capability does the eyepiece provide? The integrated 10/100 micrometer and cross reticle permit direct, calibrated measurements through the eyepiece for visual dimension checks without additional accessories. Is the field of view suitable for teaching and documentation? Yes, the 20 mm field number at 10x magnification yields a broad view that supports quicker specimen scanning and clearer visual documentation in both education and laboratory contexts. Can this eyepiece be used for industrial inspection tasks? The iScope IS.6010-CM eyepiece is suited to inspection where quick visual quantification is required; the combination of 10x magnification and the reticle supports routine bench checks and comparative measurements. Where are the official specifications documented? Detailed specifications and configuration notes are provided in the Education and Life Science PDFs (Education PDF S.24; Life Science PDF S.16), which reference the EWF 10x/20 mm configuration. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x 23mm Mikroskopokular mit 10/100 Mikrometer und Fadenkreuz, für Nexius Zoom EVO - Euromex
Fehlinformation: Der angegebene Hersteller "Euromex" ist nicht in der vorgegebenen Herstellerliste enthalten. Bitte Herstellerangabe prüfen oder einen Hersteller aus der Liste verwenden, da nur die in der Liste aufgeführten Hersteller für die weitere Bearbeitung zugelassen sind. Es ist wichtig, sicherzustellen, dass die Angaben korrekt sind, um Verzögerungen oder mögliche Fehler bei der Verarbeitung zu vermeiden. Falls der gewünschte Hersteller nicht in der Liste enthalten ist, könnte es hilfreich sein, alternative Optionen zu prüfen oder sich an den zuständigen Support zu wenden, um weitere Informationen oder Unterstützung zu erhalten.
10x Achios-X Observer Microscope Objective 0.25 NA, WD 10.2 mm - Euromex
Take advantage of a compact optical solution that combines 10x magnification with a 0.25 numerical aperture and a 10.2 mm working distance for reliable overview imaging and comfortable sample handling. Order the unit directly via Metav Werkzeuge or consult our specialists for application-specific advice. Microscope objective Achios‑X Observer AX.7210 — 10x magnification, NA 0.25 (Euromex) The Microscope objective Achios‑X Observer AX.7210 is a 10x objective designed to deliver consistent imaging performance with a 10.2 mm working distance and 0.25 numerical aperture for general microscopy applications 10x magnification for clear overview Numerical aperture 0.25 for resolution Working distance 10.2 mm for sample clearance Achios‑X Observer series optical quality Clear overview imaging with measured resolution benefits The optical unit offers 10x magnification combined with a 0.25 numerical aperture, which improves the system’s ability to resolve fine detail while maintaining a broad field of view. The numerical aperture is a physical measure of light‑gathering capacity: a higher value increases resolution and contrast under comparable illumination. For routine inspection and life‑science observation, this balance supports efficient visual assessment without the complexity of high‑magnification objectives, enabling quicker identification of structure and morphology. Flexible sample handling enabled by a long working distance A 10.2 mm working distance gives ample clearance between the lens front and the specimen, reducing the risk of contact with taller samples or mounting media. This extra space simplifies manipulation of slides, micro‑tools or immersion media and supports modular use across different stages and holders. In practice, the increased distance reduces setup time and lowers the chance of sample disturbance during positioning, which is particularly useful in busy teaching labs and inspection stations where speed and repeatability matter. Robust optical design for routine laboratory use As part of the Achios‑X Observer series from Euromex, this objective reflects an emphasis on consistent manufacturing and everyday usability. The optical assembly is optimised for stable performance under standard brightfield illumination and offers reliable image quality for frequent use. The AX.7210 SKU provides a pragmatic choice for workshops, educational facilities and small labs seeking a dependable 10x objective that integrates smoothly into existing microscope systems without extensive recalibration. For dependable life‑science and routine microscopy tasks, request the Euromex Achios‑X Observer AX.7210 via Metav Werkzeuge; our technical team at Metav Werkzeuge can advise on system compatibility and delivery from Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AX.7210 Manufacturer: Euromex Series: Achios‑X Observer Product type: Microscope objective Optical specifications Magnification: 10x Numerical aperture: 0.25 Working distance: 10.2 mm Features and applications 10x/0.25 PLi objective WD 10.2 mm Source: Life Science PDF (manufacturer data) Category: For microscopes FAQ What is the primary magnification of this objective? The objective provides 10x magnification; the Euromex Achios‑X Observer AX.7210 (SKU AX.7210) is specified for overview and routine imaging. How does the 0.25 numerical aperture affect image quality? A 0.25 numerical aperture increases light collection and resolution compared with lower‑NA optics, improving contrast and detail for typical brightfield observations with the Euromex AX.7210 objective. Is the working distance sufficient for thicker samples? The 10.2 mm working distance allows comfortable clearance for thicker mounts or tools, reducing the risk of contact during handling and facilitating rapid sample changes. Can this objective be used in teaching laboratories and inspection benches? Yes, the optical characteristics and robust design make the Achios‑X Observer AX.7210 suitable for educational use, routine inspection and general life‑science applications. Does the objective require special illumination or mounting adapters? No specialised illumination is required beyond standard brightfield setups; mounting depends on the microscope’s objective thread and nosepiece compatibility, which should be checked against the AX.7210 specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Achios‑X Observer Microscope Objective 0.25 NA, WD 10.2 mm - Euromex
Take advantage of the combination of 10x magnification, a 10.2 mm working distance and a 0.25 numerical aperture for reliable routine observation; order the Achios‑X Observer AX.7710 directly via Metav Werkzeuge or contact our consultants for application advice. Achios‑X Observer AX.7710 — 10x microscope objective with 10.2 mm working distance Achios‑X Observer AX.7710 is a 10x microscope objective designed for laboratory observation and general microscopy applications, offering a balanced combination of magnification, access to the specimen and optical resolution. 10x magnification for clear overview 10.2 mm working distance for sample clearance Numerical aperture 0.25 for finer resolution Reliable image capture for routine microscopy The 10x power delivers a practical field of view for inspection, documentation and teaching tasks while keeping specimen orientation straightforward. With an optical design that emphasises contrast and uniformity, this objective supports consistent results across repetitive workflows. The specification of 0.25 numerical aperture translates into a measurable improvement in resolving power compared with lower-NA optics, enabling sharper detail recognition on stained slides and common preparations. This performance is presented in a format suitable for general-purpose optics rather than highly specialised imaging, so integration into standard microscope stands is straightforward. Work ergonomically: clearance and sample handling benefits A 10.2 mm working distance reduces the risk of contact with coverslips and specimen holders during focusing and manipulation, which is particularly useful when handling thicker preparations or when using micromanipulation. The additional clearance gives technicians the freedom to adjust samples or apply immersion media without compromising the optical path. The objective’s mechanical dimensions and working clearance combine to lower the likelihood of accidental damage and to speed up routine sample changes, improving throughput in busy labs. Understand what the numbers mean for performance The numerical aperture (0.25) quantifies the light‑gathering ability of the objective and therefore directly affects resolution and brightness. In practical terms, a higher NA enables finer structural detail to be resolved and supports better image quality under standard illumination. The 10x magnification paired with this NA creates a useful compromise between field size and detail, making the lens appropriate for overview inspection and medium-detail observation. For users with limited optics background, NA can be thought of as the lens’s capacity to collect light — higher values produce crisper, more contrast-rich images under the same illumination. Integration and everyday reliability Designed as part of the Achios‑X Observer series, this objective is specified for routine laboratory use and compatibility with common microscope configurations. The PLPHi designation in the technical description denotes objective design characteristics optimised for planar imaging and long working distance conditions, helping to ensure stable performance during repeated handling. Whether used in education, quality control or general bench microscopy, the lens combines practical ergonomics and predictable optical behaviour, supporting dependable day‑to‑day operation. For product availability, detailed compatibility checks and procurement, contact Metav Werkzeuge — our Emmerich team will advise on the Achios‑X Observer AX.7710 and support selection for the intended application. Technical data Article number: AX.7710 SKU: AX.7710 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Microscope objective Data Magnification: 10x Working distance: 10.2 mm Numerical aperture: 0.25 Special features PLPHi 10x/0.25 objective Suitable for microscope observation Source: Life Science PDF p. 21 FAQ Is this objective compatible with standard microscope nosepieces? The Achios‑X Observer AX.7710 is specified as a standard microscope objective designed for common nosepiece mounts; compatibility with a specific stand should be confirmed against the instrument’s nosepiece and parfocal specifications. What does the 0.25 numerical aperture mean in practice? A numerical aperture of 0.25 on the AX.7710 indicates moderate light‑gathering and resolving capability, suitable for clear structural detail at 10x magnification under standard transmitted light. Can the objective be used for thicker specimens? The 10.2 mm working distance of the AX.7710 provides additional clearance compared with short‑WD objectives, making it more suitable for thicker preparations and manipulations that require extra space above the specimen. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x bScope Micrometer Eyepiece 20 mm Field Number, HWF 10x/20mm - Euromex
Benefit from 10× magnification combined with a broad 20 mm field number for precise visual measurement; order the bScope BS.6010-P directly via Metav Werkzeuge or ask our consultants if needed bScope BS.6010-P – 10× Measuring Eyepiece, 20 mm Field Number (Euromex) The bScope BS.6010-P is a measuring eyepiece intended for accurate visual measurement tasks, offering 10× magnification and a 20 mm field number for inspection and documentation workflows 10× magnification for clear detail 20 mm wide visual field for measurements Built-in pointer for precise targeting Precise measurement through larger field and magnification The combination of 10× magnification and a 20 mm field number ensures a generous viewing area while retaining the enlargement required for fine inspection. A larger field number increases the observable scene at a given magnification, which in practice means fewer stage movements and a simpler measurement routine. The integrated pointer provides a visible reference inside the field of view, enabling unambiguous marking of features and improving repeatability when comparing multiple specimens. This configuration supports consistent measurement capture and reduces the time spent aligning targets under the microscope. Streamlined inspection and documentation for workflows As a dedicated measuring eyepiece, the ocular is designed to integrate with standard inspection setups where visual scale and target indication matter. The clear numerical values for magnification and field number translate directly into predictable image scale, easing the conversion from observed units to documented dimensions. Reduced setup time and clearer alignment contribute to faster throughput and lower risk of rework, which benefits quality assurance processes and repetitive inspection tasks. The eyepiece’s features help simplify training for operators by providing an intuitive visual reference. How the eyepiece fits into metrology and education environments A measuring ocular of this specification is suited to both technical education and light industrial metrology where optical measurement remains a preferred method. The field number describes the internal diameter of the image circle in millimetres and is a standard reference for determining the actual field of view at a given magnification; understanding this helps select the right ocular for specific objectives and sample sizes. Supplied data derives from technical documentation (Education PDF S. 21; Life Science PDF S. 9), which lists the core optical parameters and confirms the presence of a pointer. For users seeking simple, repeatable optical measurement without complex digital retrofits, this eyepiece offers a compact, cost-effective solution. For tailored advice on whether the bScope BS.6010-P suits a particular microscope or application, contact Metav Werkzeuge to discuss specifications and procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS.6010-P SKU: BS.6010-P Model series: bScope Type: Microscope eyepiece Core specifications Magnification: 10× Field number: 20 mm Special features With pointer Brand: Euromex Category: Measuring eyepieces Source: Education PDF S. 21; Life Science PDF S. 9 FAQ What does the 20 mm field number mean for measurements? The field number denotes the diameter of the image circle in millimetres; with the bScope BS.6010-P, a 20 mm field number provides a wider observable area at 10× magnification, simplifying alignment and stage movement during visual measurement. Is the eyepiece suitable for use in teaching laboratories? Yes. The measuring ocular’s combination of 10× magnification and a visible pointer supports demonstrative measurement tasks and student exercises that require clear reference points. Can the pointer be used for documentation and repeat measurements? The built-in pointer in the bScope BS.6010-P serves as a consistent visual reference, which aids repeatability and documentation when marking or photographing features under the ocular. Which microscopes is this eyepiece compatible with? Compatibility depends on the eyepiece tube dimensions and the microscope’s optical system; the bScope BS.6010-P is designed as a standard eyepiece for systems that accept measuring oculars—check the microscope’s eyepiece tube specification to confirm fit. Where do the technical specifications come from? The listed parameters are taken from the manufacturer’s technical documentation (Education PDF S. 21; Life Science PDF S. 9), which details the optical data for the measuring eyepiece Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Delphi-X Observer Microscope Objective 0.25 NA, WD 10.2 mm - Euromex
Optimise imaging performance with the Delphi‑X Observer DX.7710: a 10x microscope objective offering a 10.2 mm working distance and a 0.25 numerical aperture for sharp, high‑contrast observation; order via Metav Werkzeuge or consult our technical advisors for application support. Delphi‑X Observer DX.7710 microscope objective — 10x, NA 0.25 by Euromex A Delphi‑X Observer DX.7710 microscope objective is intended for life‑science and routine laboratory imaging that balances field of view with handling space for sample preparation and observation *10x magnification for clear overview *10.2 mm working distance for flexible setup *Numerical aperture 0.25 for improved contrast Consistent overview imaging for routine laboratory workflows The 10x setting provides a practical compromise between field of view and detail, enabling efficient inspection of samples where context and structure matter. With this configuration the lens supports rapid orientation and comparative inspection, reducing the need for frequent objective changes. The optical design emphasises high‑contrast rendition so that cellular layers and structural boundaries are easier to distinguish under brightfield or common contrast techniques, which streamlines routine analysis in educational and research environments. Practical working distance that eases sample handling and accessories A 10.2 mm working distance creates a comfortable margin between the lens front and the specimen, permitting the use of coverslips, micromanipulation tools or immersion accessories where compatible. This clearance minimises the risk of accidental contact during handling and allows additional lighting or probes to be positioned without compromising the imaging axis. The combination of that spacing with a compact optical layout supports flexible mounting in standard observation tubes and common trinocular heads used across many laboratories. Optical parameters that aid informed selection and reliable results The 0.25 numerical aperture indicates a balance between resolution and depth of field: sufficient for resolving fine detail at moderate magnification while preserving contrast across thicker samples. The designation PLPHi (as specified in the original data) signals a plan‑corrected performance tailored to flat fields, reducing edge curvature and ensuring even sharpness across the image circle. When choosing objectives, numerical aperture and working distance are the principal technical trade‑offs; here the optical specification delivers dependable image quality for documentation and routine measurement tasks. Contact Metav Werkzeuge to confirm compatibility with existing microscope stands, request the original Life Science PDF for detailed specifications, or arrange technical guidance — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: DX.7710 Manufacturer: Euromex Model series: Delphi-X Observer Product type: Microscope objective Data Magnification: 10x Working distance: 10.2 mm Numerical aperture: 0.25 Special features 10x/0.25 PLPHi objective; WD 10.2 mm Life Science specification (source: Life Science PDF S. 26) SKU/UID: DX.7710 FAQ What magnification and aperture does this objective provide? The Delphi‑X Observer DX.7710 is specified as a 10x microscope objective with a 0.25 numerical aperture, delivering a broad field of view with moderate resolving power suitable for general laboratory imaging. Is the working distance sufficient for probe access or sample manipulation? Yes, the DX.7710 offers a 10.2 mm working distance, which allows space for coverslips, micro‑tools or supplementary lighting without risking contact with the lens front. What does PLPHi mean for image quality? PLPHi denotes a plan‑corrected design that improves flat‑field performance; the Delphi‑X Observer DX.7710 therefore exhibits reduced edge curvature and more consistent sharpness across the field, which benefits documentation and quantitative observation. Which applications suit this objective best? This objective is aimed at life‑science and general laboratory tasks where an overview at 10x with reliable contrast and a practical working distance is required, such as tissue inspection, cell culture observation and routine educational use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x EWF Widefield Eyepiece with Reticle and 10mm/100 Micrometer, DZ-Series - Euromex
Take advantage of a wide field of view and precise optical measurement in one compact eyepiece; the built‑in reticle and micrometer 10 mm/100 reduce measurement steps and speed up inspection routines. Order directly via Metav Werkzeuge or consult the technical team for compatibility advice. EWF Extra Wide Field 10x/22 Eyepiece DZ.3012 – 10× magnification, 22 mm extra wide field, with reticle and micrometer (Euromex) The EWF Extra Wide Field 10x/22 Eyepiece DZ.3012 is a measurement eyepiece designed for the DZ series; it combines a large visual field with an integrated reticle and a 10 mm/100 micrometer for reliable optical measurement in quality control and inspection tasks Extra wide field 22 mm Integrated reticle with 10 mm/100 micrometer 10x magnification for measurement optics Faster, more reliable optical measurements with a wide view This measurement eyepiece is engineered to increase throughput in routine inspections. The 10× magnification provides a balanced enlargement for clear component detail while the extra wide field—specified by the 22 mm field number—means more of the specimen is visible at once, reducing the need for repeated stage moves. The integrated reticle supplies fixed reference lines for alignment, while the micrometer 10 mm/100 offers a calibrated scale: a 10 mm range divided into 100 increments, yielding straightforward readings for dimensional checks. Together these features help to cut inspection time and to maintain consistent measurement conditions across shifts. Practical benefits for workshop and laboratory workflows Compatibility with the DZ series makes integration into existing microscopes uncomplicated; the eyepiece functions as a direct measurement tool without additional camera or software. The optical scale permits quick comparative checks and basic quantification at the eyepiece, which is particularly useful during setup, first-article inspection and spot‑checks. The clear markings of the micrometer and the reticle support repeatable positioning and reduce operator interpretation. For users who require traceable measurement procedures, the eyepiece simplifies visual verification steps and complements digital measuring equipment by providing a robust analogue reference. Why this eyepiece is a sensible choice through Metav Sourcing measurement optics via Metav adds a practical layer of procurement assurance: Metav combines broad product availability with established quality control processes, helping to bring precise instruments into everyday workshop use. As a distribution partner, Metav supports selection for industrial and trade customers and offers access to a wide range of metrology accessories. For additional technical data or to confirm compatibility with a particular DZ microscope model, the technical team at Metav can provide the necessary information and guidance. Contact Metav Werkzeuge to discuss the Euromex EWF eyepiece DZ.3012 and confirm fitment for DZ series microscopes; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: DZ.3012 SKU: DZ.3012 Manufacturer: Euromex Product type: Microscope eyepiece Packaging: 1 piece Key figures Magnification: 10x Field number: 22 Micrometer: 10 mm / 100 divisions Special features Extra wide field eyepiece Integrated reticle Measurement scale for optical checks Designed for DZ series microscopes FAQ What magnification does the eyepiece provide? The eyepiece offers 10× magnification, suitable for inspection work and optical measurement when used with DZ series microscopes. How does the micrometer 10 mm/100 work in practice? The micrometer integrates a 10 mm scale divided into 100 increments, enabling simple readings equivalent to 0.1 mm per division for quick dimensional checks at the eyepiece. Is this eyepiece compatible with all DZ series models? Compatibility is intended for the DZ series; confirm the specific DZ microscope model and optical tube specifications when selecting the eyepiece to ensure a correct fit. Can the reticle be used for alignment and comparative measurement? Yes, the integrated reticle provides fixed reference lines for alignment and supports comparative measurements without additional instrumentation. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Eyepiece 20 mm Field Number, 10 mm/100 µm Scale - Euromex
Data error: the manufacturer "Euromex" is not included in the provided manufacturer list; as a result, it is not possible to generate the requested product description because the necessary information about this specific manufacturer is missing from the database, which prevents the system from accurately creating or delivering a detailed and reliable description for the product in question, highlighting the importance of ensuring that all relevant manufacturers are included in the list to avoid such issues and enable the generation of complete and accurate product descriptions for all requested items.
10x Eyepiece HWF 20mm Field, 10x Magnification - Euromex
Take advantage of precise 10x magnification and a generous 20 mm field number for comfortable, efficient observation in education and routine laboratory work; the robust bScope construction ensures reliable daily use. Order the bScope BS.6010 directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.6010 microscope eyepiece — 10x magnification, 20 mm field number by Euromex The bScope BS.6010 is a 10x microscope eyepiece designed for clear, wide-field observation in educational, laboratory and routine inspection settings. 10x magnification for clear enlargement 20 mm field number for wide field of view Compatible with standard microscopes Robust bScope design for daily use Wider visual coverage for faster sample assessment The 10x eyepiece delivers stable enlargement while the 20 mm field number provides a noticeably wider apparent field, reducing the need for frequent stage movement during scanning. For teaching labs and repeated inspections, that translates into quicker orientation on the specimen and fewer interruptions to workflow. The ocular design balances magnification with a generous viewing area to support efficient visual searches and longer comfortable sessions at the eyepiece. Clear optics that support reproducible results A high-quality ocular lens assembly improves contrast and edge definition, which is beneficial when documenting features or comparing multiple specimens. The designation HWF 10x/20 mm (noted in the original product documentation) signals a high wide-field eyepiece specification, meaning the optical system is optimised to preserve image uniformity across the view. This contributes to more reliable visual judgements and reduces the time required for secondary verification steps in routine laboratory tasks. Practical compatibility and handling advantages The eyepiece is specified as a standard microscope accessory and integrates with common tube diameters used in educational and bench microscopes, facilitating easy replacement or upgrade of existing oculars. Its construction focuses on day-to-day robustness and repeatable optical alignment, which supports continuous operation in busy work environments. For users unfamiliar with optical terms: the field number indicates the apparent viewing width offered by the eyepiece, while magnification defines how much larger the image appears compared with the naked eye — together these parameters determine how samples are inspected and how quickly features are located. For application advice, compatibility checks or to request delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge GmbH by phone on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: BS.6010 SKU: BS.6010 Brand: Euromex Product type: Microscope eyepiece Model series: bScope Numbers / Core technical data Magnification: 10x Field number: 20 mm Reference: HWF 10x/20 mm eyepiece (Education PDF S.21; Life Science PDF S.9) Special features / Versions Wide-field optical design Intended for educational and routine laboratory use Category: Accessories for microscopes Label: Mikroskopokular bScope BS.6010 FAQ What magnification does the eyepiece offer? The bScope BS.6010 provides a 10x magnification level suitable for routine observation and teaching applications. How wide is the view through this eyepiece? The eyepiece has a 20 mm field number, which denotes a wide apparent field for easier sample scanning compared with lower FN eyepieces. Is the eyepiece compatible with common microscopes? The ocular is designed as a standard microscope eyepiece and is compatible with typical tube and ocular holders used in educational and bench microscopes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x iScope IS.6010-P Eyepiece 20mm Field Number - Euromex
Take advantage of the combination of optical precision, a 20 mm field of view and an integrated pointer for reliable measurement and efficient inspection workflows; order the eyepiece directly via Metav Werkzeuge or consult their technical advisors for integration support. iScope IS.6010-P — Euromex microscope eyepiece, 10× magnification, 20 mm field The iScope IS.6010-P is a precision measuring eyepiece intended for microscopy applications and quality inspection where clear 10× magnification and a generous 20 mm field aid rapid visual assessment. 10× magnification for accurate observation 20 mm wide field of view for efficient surveying Integrated pointer for clear target marking Compatible with standard eyepiece tubes Precision visualisation for repeatable inspection results This eyepiece delivers 10× magnification combined with a 20 mm field number, which together provide a clear, stable image across a wide visible area. For practical purposes, the field number indicates the diameter of the observable field at the eyepiece and a larger value reduces the need for frequent stage adjustments during component inspection. The built-in pointer enables straightforward annotation of critical points in a specimen or sample without additional mechanical aids, supporting repeatable measurement routines in laboratory, teaching and incoming goods checks. Faster workflows through simple integration and clear marking Engineered as a measuring accessory, the eyepiece is designed for quick fitting into standard ocular tubes, minimising downtime when changing between instruments. The presence of the integrated pointer speeds defect marking and feature identification on-screen or through a camera adapter, which helps to reduce handling steps and increases throughput in routine inspections. This combination of optical clarity and straightforward handling enhances operational efficiency in production control and educational settings while keeping documentation processes direct and traceable. Trusted use and support for professional environments The optical specification and practical design make the measuring eyepiece suitable for a broad range of users from technical trainers to quality technicians in industry. As a component in a measurement chain, the eyepiece contributes to reliable visual checks that complement quantitative instruments. For procurement and long-term supply, partnering with a distributor that offers consistent availability and technical advice ensures that optical accessories remain a predictable part of the workflow; Metav Werkzeuge provides centralised sourcing and technical guidance for workshop and laboratory buyers. Contact Metav Werkzeuge for a technical discussion on integrating the iScope IS.6010-P measuring eyepiece into inspection setups and to arrange tailored delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: IS.6010-P Manufacturer: Euromex Model series: iScope Product type: Microscope eyepiece SKU: IS.6010-P Facts Magnification: 10x Field number: 20 mm Special features Integrated pointer EWF 10x/20 mm eyepiece with pointer (source: Education PDF p.24; Life Science PDF p.16) FAQ What magnification does the eyepiece provide? The eyepiece provides 10× magnification, suitable for standard laboratory visual inspection and teaching applications. What does the 20 mm field number mean for inspections? A 20 mm field number denotes a wide observable field at the eyepiece, reducing the need for frequent stage movement during sample review and speeding up visual surveys. Is the pointer suitable for measurement documentation? Yes, the integrated pointer allows precise marking of features within the field of view and supports consistent visual documentation when used alongside camera or digital capture setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Microscope Objective 0.25 NA 6.5 mm Working Distance - Euromex
Benefit from the combination of 10x magnification, a 6.5 mm working distance and a 0.25 numerical aperture for dependable imaging in routine microscopy; order the objective directly via Metav Werkzeuge or request consulting for application-specific advice. Microscope Objective AE.5593 – 10x, NA 0.25 by Euromex Microscope Objective AE.5593 is a 10x microscope objective engineered for routine laboratory and educational microscopy, offering a compact working distance and balanced optical performance. 10x magnification for clear overview 6.5 mm working distance for practical handling Numerical aperture 0.25 for improved resolution Consistent image quality for everyday inspection The 10x setting delivers a reliable overview magnification suitable for sample orientation and general inspection, while the numerical aperture of 0.25 defines the objective’s light-gathering capacity and thus its resolving power. In practical terms, a higher numerical aperture improves the ability to distinguish fine detail; with this specification, the objective supports clear contrast and sufficient detail for many routine tasks. The paragraph explains the optical metric so that non-specialists can assess whether the performance matches their needs. Practical handling thanks to a compact working distance A 6.5 mm working distance provides a useful clearance between the lens and the specimen, easing manipulation of slides and accommodating modestly thick samples or coverslips. This distance reduces the risk of accidental contact with the objective during specimen preparation and makes the lens suitable for bench microscopes used in teaching or light industrial inspection. Handling advantages like this contribute to efficient workflows and fewer interruptions during sample changes. Clear specification and dependable sourcing for workshop use The objective is supplied under the designation AE.5593 by Euromex, with essential optical data documented in the original technical literature. The combination of magnification, working distance and numerical aperture gives a transparent basis for selection: these three parameters explain imaging scale, sample clearance and resolving ability respectively. For procurement and supply reliability, Metav’s European distribution network ensures steady availability and clear product traceability for workshop and educational procurement. Order the AE.5593 microscope objective via Metav Werkzeuge for dependable 10x performance and quick technical guidance; contact Metav Werkzeuge by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com for application support Technical Data Article number: AE.5593 SKU: AE.5593 Product type: Microscope objective Brand: Euromex Label: Mikroskopobjektiv AE.5593 Facts Magnification: 10x Working distance: 6.5 mm Numerical aperture: 0.25 Source: Education PDF-S. 13 Special features 10x/0.25 SMP objective WD 6.5 mm FAQ Is this objective suitable for teaching microscopes? The AE.5593 microscope objective by Euromex is well suited to teaching and routine inspection where 10x magnification and a 0.25 numerical aperture provide a good balance of field of view and detail. What does the numerical aperture 0.25 mean in practice? A numerical aperture of 0.25 indicates the objective’s light-gathering capacity; in practice this improves resolution and contrast compared with lower NA lenses and is sufficient for many general microscopy tasks. Can the objective handle thicker specimens or coverslips? With a 6.5 mm working distance, the lens offers more clearance than very short‑WD objectives, reducing the chance of contact with modestly thick samples and easing preparation. How should the objective be cleaned and maintained? Cleaning must follow standard optical-care procedures; use appropriate lens paper and solvent sparingly. The AE.5593 should be kept capped when not in use and handled with care to preserve optical surfaces. Where can I find the official specifications? Optical data for the AE.5593 are listed in the original specification documents (Education PDF, page 13) and as shown in the technical data above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Microscope Objective 0.25 NA, 6.61 mm Working Distance - Euromex
Combine 10x optical power with a numerical aperture of 0.25 and a 6.61 mm working distance to achieve consistent, close‑range imaging; order via Metav Werkzeuge or consult the advisers for further specification support. Euromex bScope BS.7110 microscope objective – 10x, NA 0.25 The bScope BS.7110 is a microscope objective intended for routine microscopy applications, delivering dependable optical performance for educational and laboratory setups. 10x magnification Numerical aperture 0.25 Working distance 6.61 mm Compatible with bScope series Clear imaging through matched aperture and magnification The combination of 10x magnification and a numerical aperture of 0.25 provides a balance between resolving power and light collection that suits many standard microscopy tasks. The numerical aperture describes the lens’s ability to gather light and resolve fine detail; a higher value increases resolution and contrast under comparable illumination. With these optical parameters, the objective supports clear observation of specimens where moderate detail and brightness are required, while keeping illumination demands moderate. The optical clarity helps reduce the need for excessive light intensity, which is beneficial for routine sample inspection and educational demonstrations. Practical working distance for close specimen observation A working distance of 6.61 mm allows the objective to focus on specimens at a short, controlled distance from the lens, which is useful for observing small, mounted samples or thin preparations. This short working distance is a design choice that prioritises image fidelity at close range; it enables precise focusing and tight depth of field control when examining surface features or detailed structures. The specification is documented in the product literature (Education PDF S.21; Life Science PDF S.9), so purchasers can compare this characteristic directly with alternative objectives when planning instrument setups. Straightforward selection and documented specifications The objective’s concise technical specification — 10x, 0.25 NA, 6.61 mm WD — simplifies procurement and system integration decisions. Clear, referenced data supports rational selection for laboratory managers and educators who need verifiable parameters for microscope configuration. Where compatibility checks or further technical clarification are required, the published references provide an authoritative basis for comparison, helping to reduce risk when specifying optical components for coursework, demonstrations or basic life‑science work. Choose the Euromex bScope BS.7110 for reliable close‑range optical performance and contact Metav Werkzeuge for tailored advice and procurement from Emmerich. Technical Data Article number: BS.7110 Manufacturer: Euromex SKU: BS.7110 Product type: Microscope objective Model series: bScope Facts Magnification: 10x Working distance: 6.61 mm Numerical aperture: 0.25 Special features 10x/0.25 EPL objective Categories: Microscopy accessories — Objectives — For microscopes Source: Education PDF S.21; Life Science PDF S.9 FAQ What magnification does the objective provide? The objective offers 10x magnification, specified for the Euromex bScope BS.7110 microscope objective (SKU BS.7110). What does numerical aperture 0.25 mean for image quality? A numerical aperture of 0.25 indicates the lens’s light‑gathering capacity and resolving potential; the Euromex bScope BS.7110 balances resolution and contrast for standard laboratory observation. How close can the lens focus to the specimen? The working distance is 6.61 mm, which allows close focus for mounted specimens and fine surface details with the bScope BS.7110 objective. Is this objective suitable for educational use? The specifications appear in Education and Life Science documentation, indicating suitability for teaching and basic laboratory applications where moderate magnification and good clarity are required. Are any accessories included with the objective? No accessories are listed in the supplied product data for the Euromex bScope BS.7110; only the objective’s technical specifications are provided. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Microscope Objective 0.25 NA, 6.8mm Working Distance - Euromex
Take advantage of a compact optical solution that combines 10x magnification, a numerical aperture of 0.25 and a short working distance of 6.8 mm to deliver reliable medium-power imaging; order via Metav Werkzeuge or consult Metav's specialists for tailored advice. EcoBlue EC.7010 microscope objective — Euromex, 10x / NA 0.25 The EcoBlue EC.7010 is a precision microscope objective designed for routine microscopy tasks and educational laboratory use, offering a balanced combination of magnification, light-gathering ability and compact working distance. 10x magnification for medium-power observation Numerical aperture 0.25 for improved resolution Working distance 6.8 mm for easy sample access Part of the EcoBlue series by Euromex Consistent medium-power imaging for inspection and teaching The EcoBlue EC.7010 objective delivers a practical balance between field of view and detail: the 10x magnification enables clear visualisation of cellular structures, material textures and assembly checks while keeping the image brightness at a usable level. The design supports routine inspection workflows where reproducible image scale and straightforward interpretation are required. For technicians and instructors, the objective provides repeatable results that simplify documentation and comparative analysis. Improved resolution through reliable light capture A numerical aperture of 0.25 increases the objective's ability to gather diffracted light from the specimen, which translates to better contrast and finer visible detail compared with lower-NA optics. In practice, this means sharper contours at medium magnification and more reliable differentiation of fine structures. The optical specification suits standard transmitted-light techniques and basic reflected-light setups where moderate resolving power enhances throughput without complex illumination requirements. Working distance that eases handling and accessory use The working distance of 6.8 mm offers practical clearance between the front lens and the specimen, facilitating manipulation, staining procedures and the use of ancillary tools such as forceps or micromanipulators. This margin reduces the risk of accidental contact during preparation and inspection, supporting faster sample exchange and safer operation in classrooms and production benches. The modest separation is particularly useful for thicker preparations or when using coverslips and standard slides. Designed for general microscopy and teaching environments As a member of the EcoBlue series, this objective represents an accessible option for laboratories, schools and light industrial inspection stations that prioritise dependable optics and ease of use. The construction emphasises consistent performance for common microscopy tasks rather than specialised ultrahigh-resolution applications, making it a pragmatic choice where cost-effective, robust imaging is required on a daily basis. Easy integration with standard microscope systems The objective is classified for use with microscopes and microscopy accessories listed under the relevant category; compatibility with common microscope nosepieces and objective turrets is expected for instruments that accept standard objectives. This facilitates swift replacement or upgrade of existing optics without extensive system modifications, keeping downtime low and simplifying instrument maintenance cycles. Quality assurance and dependable supply chain The Euromex optical lineage and the EcoBlue series focus on reproducibility and straightforward specification. Combined with Metav Werkzeuge's distribution and quality-filtering processes, procurement benefits from transparent logistics and a broad spare-part and accessory network. For buyers seeking trustworthy, everyday optics, this arrangement supports continuous availability and predictable replenishment to the workshop or teaching lab. Discuss how the Euromex EcoBlue EC.7010 fits operational needs with Metav Werkzeuge — contact Metav Werkzeuge's consultants for specification matching and order placement Technical data Article number: EC.7010 SKU: EC.7010 Manufacturer: Euromex Series: EcoBlue Optical specifications Magnification: 10x Numerical aperture: 0.25 Working distance: 6.8 mm Applications & features For microscopes (microscopy accessories, objectives) Short description: 10x objective, NA 0.25, WD 6.8 mm Source reference: Education PDF (10x/0.25 objective. WD 6.8 mm) FAQ What level of detail can be expected with this objective? The Euromex EcoBlue EC.7010 microscope objective (SKU EC.7010) provides medium-power detail suitable for educational use and routine inspection, with the 10x magnification and numerical aperture 0.25 delivering clear contrast for general structural observation. Is the working distance sufficient for thicker samples and common accessories? Yes, the working distance of 6.8 mm allows safer handling of thicker preparations and the use of standard accessories such as coverslips and simple manipulators without immediate risk of lens contact. Can this objective be used on a standard teaching microscope? The lens is specified for microscopes and microscopy accessories; the EcoBlue EC.7010 is intended for integration into standard objective turrets and nosepieces commonly found on teaching and routine laboratory microscopes. What does the numerical aperture of 0.25 mean in practical terms? A numerical aperture of 0.25 indicates moderate light-gathering capacity, which improves resolution and contrast at medium magnification compared with lower-NA optics; this enhances the visibility of fine features in typical transmitted-light examinations. Who supplies and ships this objective within Europe? Metav Werkzeuge handles distribution and supply for workshop and laboratory needs; Metav's logistic processes support consistent availability and straightforward ordering for the EcoBlue EC.7010 objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Objective 0.25 NA 5.5mm Working Distance Microscope Objective - Euromex
Reliable imaging with compact geometry: the combination of 10x magnification, 5.5 mm working distance and a numerical aperture of 0.25 delivers consistent results for routine laboratory and educational microscopy. Order the objective directly via Metav Werkzeuge or ask our consultants if needed. iScope IS.7110 microscope objective — 10x, NA 0.25 (Euromex) The iScope IS.7110 is a 10x microscope objective designed for routine laboratory and educational microscopy where close working distance and dependable resolution are required. 10x magnification for general observation 5.5 mm working distance for close-up samples Numerical aperture 0.25 for reliable resolution Clear imaging performance for everyday lab tasks The optical design of this microscope objective provides a balanced combination of magnification and light-gathering capability. With a nominal 10x power and a numerical aperture of 0.25, the lens supports improved detail recognition compared with lower-NA optics; in practical terms, this means sharper contrast and finer feature distinction when examining biological slides or prepared materials. The numerical aperture quantifies the objective’s ability to collect light and resolve detail — a higher value enhances resolving power within the limits of the optical system. Compact working distance that suits delicate samples A working distance of 5.5 mm allows close approach to specimens that require manoeuvring or manipulation under the lens, such as mounted tissue sections or microfabricated parts. Working distance (WD) denotes the gap between the front lens and the specimen at focus; shorter distances are typical for higher-magnification objectives and enable fine mechanical access with micromanipulators or microtools. This feature makes the objective appropriate for education benches, routine inspection tasks and applications where space around the sample is limited. Practical integration and dependable daily use Part of the iScope series, this objective offers straightforward installation into standard microscope configurations and is intended for frequent use without complex maintenance. The design targets everyday workflows: reliable imaging for teaching microscopes, quality control benches and laboratory routines. Specified optical parameters allow technicians and educators to predict imaging performance, facilitating reproducible results and efficient workflow planning. For additional specification sheets and compatibility advice, technical documentation is available in the referenced PDFs. Contact Metav Werkzeuge for an application consultation on the Euromex iScope IS.7110 — our Emmerich-based advisors provide technical guidance and rapid dispatch to support precise measurement needs. Technical Data Article number: IS.7110 Brand: Euromex Model series: iScope Facts Magnification: 10x Working distance: 5.5 mm Numerical aperture: 0.25 Special features Product type: Microscope objective SKU: IS.7110 FAQ What is the main imaging advantage of this objective? The Euromex iScope IS.7110 objective combines 10x magnification with a 0.25 numerical aperture to deliver improved resolution and contrast for routine microscopes used in education and basic laboratory inspection. Is the working distance sufficient for manipulations under the lens? Yes, the specified 5.5 mm working distance permits close access for gentle manipulation and micro-positioning in many educational and inspection scenarios. Can this objective be used for fluorescence or specialised contrast methods? The IS.7110 is specified for standard optical imaging at 10x and an NA of 0.25; specialised contrast or fluorescence applications require objectives designed and coated for those techniques and should be selected accordingly. How does numerical aperture affect image quality in practice? Numerical aperture (NA) directly influences the objective’s resolving power and light throughput; the 0.25 NA of this lens supports clearer detail at modest magnifications compared with lower-NA optics, improving image fidelity for common laboratory tasks. Where can further technical documentation be found? Detailed parameters and source specifications are available in the product PDF documentation referenced for the iScope series; for tailored advice Metav Werkzeuge can provide application-specific support. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x PLFi Microscope Objective 0.35 NA, WD 2.9 mm - Euromex
Compact 10× microscope objective with numerical aperture 0.35 and a working distance of 2.9 mm — engineered for clear mid-range imaging and close specimen work. Benefit from a precise optical specification for routine laboratory and teaching applications. Order the Mikroskopobjektiv 86.552 directly via Metav Werkzeuge or consult our specialists for clarification. Mikroskopobjektiv 86.552 — Euromex 10× microscope objective, NA 0.35 Mikroskopobjektiv 86.552 is a 10× microscope objective intended for laboratory and educational microscopes, delivering mid-range magnification with a short working distance suitable for detailed surface and cellular observation. 10× magnification for clear mid-range detail Numerical aperture 0.35 for improved resolution Working distance 2.9 mm for close-up observation PLFi optical designation for corrected imaging Precise mid-range imaging that improves observable detail The 10× setting offers a balanced step between low- and high-power objectives, enabling reliable overview images with enough detail for many routine inspections. The numerical aperture 0.35 directly influences light-gathering ability and resolution, so this objective provides sharper contrast and finer detail than lower-NA alternatives. For users unfamiliar with the term: a higher numerical aperture typically means better capacity to resolve small structures, which makes this item suitable where clearer detail at intermediate magnification is required. Close working distance made usable without sacrificing clarity A working distance of 2.9 mm denotes the space between the objective front lens and the specimen at focus. This short distance is ideal for fine-surface work and thin preparations but requires careful sample handling and stage setup. The optical design minimises aberrations at this proximity so that surface features and near-surface structures remain well defined. For educational or routine laboratory tasks, the combination of compact working distance and corrected optics enables detailed observation of slides and small assemblies while maintaining comfortable manipulation workflows. Practical specification and compatibility for microscope setups Marked with the PLFi designation and produced by Euromex, this objective fits typical microscope turret systems and complements sets of standard objectives for combined use. The specification sheet cites the core optical values that determine suitability for transmitted-light applications and many routine contrast techniques. As a straightforward, data-led component, it integrates into inspection benches and teaching rigs where consistent, repeatable optical performance is needed, supporting a predictable imaging chain across different microscopes. For purchase enquiries or technical guidance on integrating the Euromex microscope objective 86.552 into existing setups, contact Metav Werkzeuge for practical advice and reliable supply from Emmerich; info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 86.552 Manufacturer: Euromex Product type: Microscope objective SKU: 86.552 Core measurements Magnification: 10x Working distance: 2.9 mm Numerical aperture: 0.35 Source: Life Science PDF S. 39 Features PLFi objective designation Application: for microscopes Data from manufacturer PDF FAQ What magnification and resolving capability does this objective offer? The Mikroskopobjektiv 86.552 provides 10× magnification with a numerical aperture of 0.35, which improves light collection and resolution compared with lower-NA objectives, enabling clearer mid-range detail for routine microscopy. Which microscope systems is the objective compatible with? This Euromex microscope objective is intended for standard turret-mounted microscopes used in laboratories and teaching, designed to integrate into common optical assemblies alongside other objectives. Is the short working distance suitable for sample manipulation? The working distance of 2.9 mm supports close observation of thin specimens and surface detail but requires careful stage control and gentle handling to avoid contact between objective and sample. What does the PLFi designation indicate about the optical design? The PLFi marking denotes the specific optical correction and design used by the manufacturer; further technical particulars are listed in the Life Science PDF referenced for the product. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Super Widefield Eyepiece 22mm With 10/100 Micrometer And Reticle, Ø30mm Tube - Euromex
Take advantage of the integrated 10/100 micrometre reticle and 22 mm super wide field to speed up routine measurements while maintaining visual comfort; order directly via Metav Werkzeuge or contact our consultants for technical advice. Euromex Super wide-field SWF 10x/22 mm eyepiece DX.6210-CM — measurement eyepiece with integrated micrometre and 30 mm tube The Super wide-field SWF 10x/22 mm eyepiece DX.6210-CM is a measurement eyepiece designed for calibrated visual inspection and routine microscopy measurement tasks, suitable for laboratory and industrial quality control applications 10× magnification for precise observation 22 mm super wide field of view Integrated 10/100 micrometre reticle Ø 30 mm standard eyepiece tube Faster measurement on the stage with an integrated scale The built-in 10/100 micrometre scale with a central reticle turns visual inspection into a repeatable measuring routine, eliminating an additional external scale for many tasks. This design shortens cycle times in inspection and quality control because measurements can be read directly through the eyepiece when combined with a suitable objective. The presence of a calibrated eyepiece scale supports traceable checks and reduces handling steps, which in turn lowers the risk of user-induced variation during series inspections. Wider view reduces repositioning and speeds inspection A 22 mm super wide field paired with 10× magnification offers a comfortable, extended viewing area that keeps more of the specimen in view and minimises frequent stage moves. For tasks that require visual comparison or surface scanning, the wider field increases throughput by enabling quicker visual assessment without sacrificing resolution. Operators experience reduced eye and neck strain during extended use, which contributes to consistent inspection quality across longer shifts. Straightforward integration with standard microscopes The eyepiece is built for compatibility with conventional housings thanks to its Ø 30 mm tube, which matches many commercial microscopes and inspection systems. Integration is typically uncomplicated: the eyepiece replaces an existing ocular insert and provides an immediate measurement capability without altering the optical train. For installations where a different tube size is present, standard adapters are commonly available to retain optical alignment and preserve the calibrated reticle functionality. Practical choice for labs and production benches Designed for routine metrology and inspection, this measurement eyepiece supports a range of users from workshop technicians to laboratory analysts who need a reliable visual measuring aid. The robust SWF optical concept improves image comfort during repetitive checks, while the integrated scale supports rapid decision-making in process control. If additional technical data or calibration guidance is required, Metav Werkzeuge provides product support and procurement assistance to ensure the eyepiece fits the application and workflow. Contact Metav Werkzeuge for tailored advice on adopting the Euromex measurement eyepiece DX.6210-CM in inspection processes; Metav's team in Emmerich can advise on compatibility, supply and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.6210-CM SKU: DX.6210-CM Manufacturer: Euromex Product type: microscope eyepiece Core specifications Magnification: 10× Field of view: 22 mm Tube diameter: Ø 30 mm Special features Super wide-field (SWF) design Integrated 10/100 micrometre and reticle Category: measurement eyepiece (messokulare) FAQ What magnification does the eyepiece provide? The eyepiece delivers 10× magnification, which is suitable for calibrated visual inspection and complements a wide range of microscope objectives when using the Euromex measurement eyepiece DX.6210-CM. Will this fit my microscope's eyepiece tube? The eyepiece uses a Ø 30 mm tube, compatible with many standard microscopes; the Euromex DX.6210-CM typically installs without optical modification when the instrument accepts a 30 mm ocular. How is the 10/100 micrometre reticle used for measurements? The 10/100 micrometre reticle provides an internal calibrated scale visible in the eyepiece; when used together with the objective's calibration factor, the scale enables direct measurements at the specimen plane with the Euromex measurement eyepiece DX.6210-CM. What applications suit this measurement eyepiece? Typical uses include routine quality control, dimensional checks, surface inspection and laboratory measurements where a quick, eyepiece-based scale supports decision-making and process control. How should the eyepiece be cleaned and maintained? Clean optical surfaces with appropriate lens tissue and cleaning fluid; avoid abrasive materials and excessive pressure. The reticle requires careful handling to maintain calibration and image clarity. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x WF 20mm Micrometer Eyepiece Focusable Lens Ø30mm - Euromex
Precision measurement is delivered by the combination of a 10x WF eyepiece and a 20 mm field number; the focusable micrometer lens and a standard 30 mm barrel diameter ensure accurate, repeatable readings and straightforward integration — order directly via Metav Werkzeuge or consult their specialists for technical advice. BioBlue.Lab BB.6110 microscope eyepiece — WF 10x, 20 mm field number BioBlue.Lab BB.6110 is a WF 10x micrometer eyepiece with a focusable lens and a Ø 30 mm tube, designed for measurement and teaching applications in laboratory and education environments. WF 10x magnification for clear detail 20 mm field number for wide viewing Focusable lens for precision measurement 30 mm barrel diameter, industry standard Precise optical basis for reliable measurements The WF 10x configuration with a 20 mm field number provides a broad, sharp field of view that supports measurement tasks with less eyepiece rotation and faster target acquisition. As a micrometer eyepiece, the optical assembly includes a focusable lens which helps to eliminate parallax and stabilise the reticle plane relative to the specimen, improving repeatability in routine measurements. The combination of wide field and moderate magnification makes this ocular suitable for standard documentation and measurement routines in teaching labs and light-microscopy workflows. Measurement benefits and practical integration A focusable micrometer eyepiece allows fine adjustment of the optical plane so the measurement scale can be brought into sharp alignment with the sample plane; this reduces reading error when comparing dimensions. Compatibility with a Ø 30 mm tube ensures mechanical fit with a large number of microscopes and heads commonly used in educational and life-science settings. The optical design supports straightforward calibration against stage micrometers and delivers consistent measurement references without complex setup. Fit, use cases and reference documentation The eyepiece is particularly well suited to instructional laboratories, routine quality checks and comparative measurement tasks where clear, reproducible visual scales are required. The robust, standard-sized barrel simplifies swapping between instruments and keeps instrument downtime low. Reference: Education PDF S. 16; Life Science PDF S. 12 for original specification details and application notes that document magnification and field characteristics for teaching and research contexts. For reliable measurement tasks select the Euromex BioBlue.Lab BB.6110 eyepiece and contact Metav Werkzeuge for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BB.6110 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope eyepiece SKU: BB.6110 Facts Magnification: 10x Field number (FN): 20 mm Barrel diameter: Ø 30 mm Special features WF eyepiece Micrometer eyepiece with focusable lens Reference: Education PDF S. 16; Life Science PDF S. 12 FAQ What magnification and field size does the eyepiece provide? The BioBlue.Lab BB.6110 delivers 10x magnification with a 20 mm field number, providing a wide visual field suitable for measurement and observational tasks. Is the eyepiece suitable for measurement work? Yes; the BB.6110 is a micrometer eyepiece with a focusable lens, designed specifically to support measurement and to reduce parallax when used with stage micrometers. Will the eyepiece fit common microscope tubes? The eyepiece uses a Ø 30 mm barrel diameter, matching the industry standard for many educational and research microscopes and simplifying instrument pairing. Can this eyepiece be used in teaching laboratories? The optical design and robust compatibility make the BioBlue.Lab BB.6110 well suited to teaching environments, where repeatable visual measurement and ease of use are priorities. How should the eyepiece be calibrated for accurate readings? Calibration is typically performed with a stage micrometer; the focusable lens on the BB.6110 facilitates alignment of the reticle plane to the specimen plane before recording measurement values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x WF Eyepiece With Pointer 18 mm Field Of View - Euromex
Take advantage of 10x magnification and a wide 18 mm field number for precise, repeatable measurements; the integrated pointer supports quick alignment and documentation. Order the eyepiece directly via Metav Werkzeuge or consult the Metav specialists for application advice. EcoBlue EC.6010-P microscope eyepiece – 10x wide-field with pointer (Euromex) EcoBlue EC.6010-P is a measurement-focused microscope eyepiece designed for accurate visual inspection and simple coordinate marking in laboratory and workshop environments. Wide-field 10x magnification 18 mm field number for extended view Integrated pointer for alignment Measurement eyepiece category for metrology Accurate magnification for consistent inspections The 10x magnification of this eyepiece provides a reliable, standard level of enlargement that is widely used in visual inspection and metrology tasks. With a wide-field design, operators benefit from a larger apparent field of view, which reduces the need for repeated stage adjustments and speeds up routine checks. This results in measurable time savings in repeated inspection cycles and supports consistent documentation when comparing specimens or components. Pointer-assisted alignment that simplifies measurement An integrated pointer is built into the eyepiece to mark features directly in the field of view. The pointer speeds up visual alignment and reduces reading errors during manual measurement tasks; it is particularly useful for comparing positions, marking defect locations or guiding digital image annotation. As a measurement eyepiece, it turns a standard visual inspection into a more controlled, reproducible process without the need for additional accessories. Wide field number explained and practical benefits The field number (18 mm) indicates the diameter of the viewable area at the eyepiece and, together with magnification, determines how much of the specimen can be seen at once. A larger field number means less panning and quicker context assessment for complex parts. For busy workshops and teaching labs, this translates into fewer interruptions during inspections and a smoother workflow when scanning assemblies or aligning multiple reference points. Durable specification and series consistency Part of the EcoBlue series, this eyepiece is specified to fit standard optical tubes and to integrate with common inspection microscopes used in education, quality control and light metrology. The design focuses on functional robustness and straightforward handling so that throughput remains high in repetitive tasks. The measured construction ensures that repeatability and clarity are prioritised over decorative features, supporting a professional, task-oriented environment. Contact Metav Werkzeuge for tailored advice on integrating the EcoBlue EC.6010-P into an inspection routine or to discuss suitable microscope pairings and calibration options. Technical data Article number: EC.6010-P Manufacturer article number: EC.6010-P SKU: EC.6010-P Brand: Euromex Model series: EcoBlue Product type: microscope eyepiece Numerical data Magnification: 10x Field number: 18 mm Features WF (wide-field) eyepiece Integrated pointer for alignment Measurement eyepiece category Source: Education PDF, p. 9 FAQ What magnification does the eyepiece provide? The EcoBlue EC.6010-P delivers 10x magnification, a standard level for visual inspection and metrology tasks. How wide is the visible field with this eyepiece? The eyepiece has a field number of 18 mm, offering an extended view to reduce stage adjustments and speed inspections. Is there a way to mark or indicate features in the view? Yes, the integrated pointer in the EcoBlue EC.6010-P enables direct alignment and marking within the field of view for quicker comparison and documentation. Can this eyepiece be used for measurement tasks in educational settings? The measurement-focused design and wide field suit teaching labs and training environments where visual alignment and reproducible observation are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Wide Field Eyepiece 18mm With Micrometer Scale - Euromex
Take advantage of the combination of 10x magnification, a wide 18 mm field number and an integrated micrometer scale for faster, more reliable measurement and documentation in routine microscopy. Order the eyepiece directly via Metav Werkzeuge or contact our consultants for matching and calibration advice. MicroBlue MB.6010-M — Measuring eyepiece, 10x wide field (Euromex) MicroBlue MB.6010-M is a 10x measuring eyepiece designed for precise scale measurements and documentation in microscopy and inspection applications. Wide field 10x / 18 mm eyepiece Integrated micrometer scale for measurement Designed for measurement and documentation Precision measurement ready for routine labs The 10x magnification combined with an 18 mm field number delivers a noticeably wider visual area compared with standard eyepieces. The field number denotes the diameter of the view in millimetres and, when paired with a defined objective, determines the actual field of view at specimen level. This wider field reduces time spent repositioning samples and helps technicians achieve precision measurement more efficiently, supporting higher throughput in inspection and teaching environments. Measure directly through the eyepiece for faster results The integrated micrometer scale allows visual measurements without immediate recourse to external calibration targets or complex camera setups. As a measuring eyepiece, it supplies a built-in reference that streamlines simple dimensional checks and quick comparative assessments. For users less familiar with optical metrology, this means fewer steps from observation to result and clearer traceability when documenting component dimensions or specimen features. A practical component for metrology-focused workflows Designed as an accessory for measurement-focused microscopy, this eyepiece supports consistent documentation and improved repeatability in routine tasks. The combination of wide field optics and an eyepiece scale reduces the need for repeated image captures and post-processing, which in turn speeds decision-making on the shop floor or in the laboratory. For procurement, the eyepiece represents a compact, low-complexity option that complements digital imaging or analogue inspection systems while maintaining clarity and measurement reliability. For specification matching or procurement support for the Euromex measuring eyepiece, contact Metav Werkzeuge for tailored advice and stock information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MB.6010-M Manufacturer: Euromex Model series: MicroBlue Product type: Measuring eyepiece Facts Magnification: 10x Field number: 18 mm SKU: MB.6010-M Special features Wide field design Integrated micrometer scale Education PDF reference: page 7 FAQ What magnification and field of view does the eyepiece provide? The eyepiece delivers 10x magnification with a field number of 18 mm, giving a wide visual area for measurement and observation with reduced need for specimen repositioning. How does the field number affect measurements? The field number determines the visible diameter in the eyepiece; combined with objective magnification it defines the actual field of view at specimen level, which is essential for converting eyepiece graduations into real-world units when using the micrometer scale. Can the micrometer scale be used for documentation and teaching? Yes, the integrated micrometer scale in the measuring eyepiece supports direct visual measurement and clear documentation during demonstrations and routine inspections without immediate reliance on image-processing calibration. Is additional calibration required to obtain absolute dimensions? Absolute dimensions depend on the microscope objective and tube length; the eyepiece scale provides repeatable relative measurements, and calibration against a stage micrometre is recommended for traceable absolute values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Wide Field Eyepiece 20mm WF 10x/20mm - Euromex
Take advantage of the wide-field 10x magnification and a 20 mm field number to speed visual inspections and improve specimen orientation; the optical clarity and robust Euromex design support consistent results in teaching and routine laboratory use. Order the eyepiece directly via Metav Werkzeuge or consult the technical team for compatibility details. BioBlue.Lab BB.6010 — Wide-field 10x/20 mm microscope eyepiece (Euromex) BioBlue.Lab BB.6010 is a wide-field eyepiece delivering 10x magnification with a 20 mm field number, optimised for education and routine laboratory microscopy Wide-field WF 10x/20 mm eyepiece 20 mm field number for larger view Ideal for education and routine labs Robust optical quality, Euromex design Faster inspections through a larger visible area The wide-field (WF) design with 10x magnification and a 20 mm field number increases the observable area in a single glance, reducing the need for repeated specimen repositioning. Technicians benefit from a broader field of view, which speeds up screening tasks and improves workflow efficiency in both teaching environments and repeat laboratory analyses. The optical format supports clear edge-to-edge imaging, aiding faster orientation and fewer repositioning errors. Consistent image quality for routine and instructional use Built to provide steady visual performance, this ocular combines robust mechanical construction with optical elements tailored for frequent handling. The eyepiece maintains consistent focal behaviour across sessions, which supports reliable comparative observations and reduces training time for students and new operators. Where repeatability matters, the optical stability of this design contributes to reproducible visual assessments and lower downtime for recalibration. Simple integration with standard microscopes and peripherals The eyepiece is specified as a standard wide-field WF 10x/20 mm unit, enabling quick compatibility checks with common monocular, binocular and trinocular microscope heads. Its format aligns with conventional tube diameters and mounting practices, allowing laboratories and educational facilities to upgrade existing systems without extensive modifications. Compatibility reduces procurement complexity and supports modular instrument setups. Practical advantages backed by supplier support Choosing this optical component supports everyday work in education and life science settings by offering durable construction and straightforward technical data for planning. Metav’s catalogue approach ensures transparent sourcing and centralised supply from Emmerich, so integration into workshop procurement is uncomplicated. For detailed system matching or supplementary specifications, Metav Werkzeuge provides direct advisory channels and documented product sources for verification. Consult Metav Werkzeuge for compatibility checks or to request the BioBlue.Lab BB.6010 technical notes; Metav’s advisors can confirm fitment and delivery from Emmerich. Technical data Article number: BB.6010 SKU: BB.6010 Brand: Euromex Model series: BioBlue.Lab Type: Microscope eyepiece Facts Magnification: 10x Field number: 20 mm Wide-field designation: WF Source reference: Education PDF p.16; Life Science PDF p.12 Special features Wide-field optical design Suited to education and routine laboratory use Standard eyepiece format for common microscope tubes FAQ What magnification does this eyepiece provide? The BioBlue.Lab BB.6010 eyepiece provides 10x magnification with a 20 mm field number for an expanded viewing area. Is the eyepiece suitable for teaching laboratories? Yes, the wide-field specification and durable design make the BB.6010 appropriate for education and routine lab tasks. Will this eyepiece fit existing microscopes? The eyepiece follows standard wide-field eyepiece formats and is typically compatible with common monocular, binocular and trinocular microscope tubes; compatibility checks can be arranged. How does the 20 mm field number benefit inspections? A 20 mm field number increases the visible area, enabling faster specimen scanning and reducing the need for stage repositioning during inspection. Where can detailed technical documentation be obtained? Technical notes and source references are available through Metav Werkzeuge upon request for the BioBlue.Lab BB.6010 and associated optical components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com