60x Objective 0.80 NA 1.5 mm Working Distance, S60x/0.80 PLi - Euromex
Take advantage of the combination of 60x magnification, a high numerical aperture (0.80) and a compact 1.5 mm working distance for sharper detail and reliable imaging in demanding inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Microscope objective Achios‑X Observer AX.7260 — high‑resolution 60x objective with 0.80 NA The Microscope objective Achios‑X Observer AX.7260 is an engineered optical lens for laboratory and industrial microscopes, designed to deliver detailed imaging at high magnification for inspection, research and quality control applications. High 60x magnification Numerical aperture 0.80 Working distance 1.5 mm Achios‑X Observer compatibility Delivering the resolution required for critical inspection The combination of 60x magnification and a numerical aperture of 0.80 provides noticeably higher resolving power compared with lower‑aperture optics; this means finer structural details can be distinguished and captured. The numerical aperture governs the objective’s light‑gathering ability and directly affects image contrast and resolution — a larger value improves capability at high magnifications. For operators evaluating microstructures, circuit features or biological samples, this optical specification translates into crisper edge definition and better visual differentiation between closely spaced elements. The result is a measurable improvement in inspection confidence and fewer repeat analyses. Optimised for short‑distance inspection tasks With a working distance of 1.5 mm, this objective is purpose‑built for applications that require close proximity to the specimen, such as high‑precision surface inspection or thin‑section microscopy. A shorter working distance reduces the optical path and improves stability for very high magnification imaging, but it also requires careful sample placement and compatible stage hardware. The compact clearance is ideal where space at the sample plane is limited and where objective immersion or cover‑slip considerations are managed. Compatibility with standard observer stands ensures straightforward mechanical integration into existing setups. Optical build and series compatibility for consistent results Specified as an S60x/0.80 PLi type within the Achios‑X Observer series, this objective is manufactured for consistent optical performance across matched sets. The designation indicates the design intent and alignment with Euromex’s observer line, facilitating predictable imaging characteristics when paired with matching condenser and ocular assemblies. For procurement and inventory, using series‑matched optics minimises aberrations and simplifies calibration routines, delivering more repeatable measurements and fewer alignment interventions during routine use. Practical integration and support for laboratory workflows Beyond raw optical data, the objective supports efficient laboratory operation when combined with proper illumination and camera systems: the high numerical aperture benefits digital capture by increasing signal for shorter exposure times and improved signal‑to‑noise ratios. Technical documentation (referenced in the Life Science PDF) lists the core specifications and helps ensure correct optical matching. For teams establishing new measurement protocols or retrofitting inspection stations, the clear technical parameters allow planners to assess system throughput, expected image quality and required handling procedures before purchase, reducing integration risk and downtime. Contact Metav Werkzeuge for a tailored specification check, compatibility guidance and access to the technical PDF for the Euromex Achios‑X Observer AX.7260; our consultants in Emmerich will help determine the best configuration for each inspection task Technical data Article number: AX.7260 SKU: AX.7260 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Microscope objective Label: Mikroskopobjektiv Achios-X Observer AX.7260 Facts Magnification: 60x Numerical aperture: 0.80 Working distance: 1.5 mm Special features Objective designation: S60x/0.80 PLi Application area: For microscopes (microscopy accessory) Source reference: Life Science PDF (pages 21, 46) FAQ What level of detail can be expected with this objective? The Euromex Achios‑X Observer AX.7260 achieves high detail through its 60x magnification and 0.80 numerical aperture, enabling improved resolution for small features and structural contrasts. Is this objective compatible with standard observer microscope stands? Yes, the AX.7260 is part of the Achios‑X Observer series and is specified for integration with observer stands and matching optical components to ensure mechanical and optical compatibility. How does the short working distance affect sample handling? A 1.5 mm working distance offers enhanced optical performance at close range but requires precise sample placement and appropriate stage control to avoid contact with the lens. Where can the official technical specifications be found? Detailed specifications, including the S60x/0.80 PLi designation, are listed in the Life Science PDF referenced for the product and can be supplied by Metav Werkzeuge on request. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
675mm MacroZoom Digital Microscope 8.3MP 3840x2160 18:1 Optical Zoom Autofocus, HDMI/USB/WiFi - Euromex
Benefit from high‑resolution 8.3 MP imaging and an 18:1 optical zoom for versatile inspection and documentation; compact dimensions and integrated HDMI/USB/WiFi connectivity support efficient production routines. Order the MacroZoom MZ.4702 directly via Metav Werkzeuge or ask our consultants if needed. MacroZoom MZ.4702 — Digital microscope with 8.3 MP sensor and 18:1 optical zoom (Euromex) The MacroZoom MZ.4702 is a digital microscope designed for large‑area inspection and fine‑detail analysis in quality control, assembly checks and research environments 8.3 MP Sony CMOS sensor clarity 18:1 optical zoom for wide magnification range HDMI, USB and WiFi connectivity Autofocus with up to 60 fps capture High‑resolution imaging for reliable defect detection The MacroZoom series combines a Sony CMOS 1/2.8 inch sensor with an effective 8.3 MP output (3840 x 2160 pixels), delivering sharp stills and video for traceable documentation. Higher pixel counts increase the level of visible detail on-screen, which reduces rework by making small defects immediately visible. The supplied ImageFocus Alpha software enables image capture, measurements and annotation for quality reports; this simplifies traceability and shortens the time from inspection to decision. External illumination is recommended to achieve the best contrast and repeatable results. Flexible zoom and working distance for varied tasks An 18:1 optical zoom provides a continuous optical magnification range without the loss of detail associated with digital enlargement, so both overview shots and close inspections remain crisp. With a working distance of 400–670 mm, the system adapts to larger assemblies as well as fine components; on a 24‑inch screen at 600 mm working distance the effective display magnification ranges from 0.8× to 14.5×, with a field of view from 65 × 37 cm down to 3.6 × 2 cm. This combination reduces the need for multiple inspection tools and speeds up setup when switching between tasks. Seamless connectivity and fast capture save time Integrated HDMI, USB and WiFi interfaces allow direct connection to monitors, PCs and local networks for live inspection, recording and remote review. Capture rates of up to 60 fps support smooth live imaging for dynamic inspection tasks and quick alignment. The system is delivered with practical accessories — mouse, WiFi dongle, HDMI cable, power supply and tripod — to enable rapid commissioning. Autofocus reduces operator setup time and helps maintain consistent image quality across multiple operators and shifts. Robust design and intuitive operation for everyday use At 4.6 kg and a compact footprint (675 mm height; base plate 380 mm wide; overall width 560 mm; depth 260 mm), the unit is stable yet transportable within the workshop. The autofocus and software‑assisted controls lower the learning curve, enabling technicians with limited optical experience to produce repeatable results. The optical construction and industrial sensor ensure reliable performance under routine use, supporting continuous inspection cycles without frequent recalibration. Recommended external lighting allows adaptation to different surface finishes and reflective materials. Contact Metav Werkzeuge for tailored advice on integrating the MacroZoom MZ.4702 into inspection workflows and for assistance selecting accessories; Metav Werkzeuge advises from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MZ.4702 Manufacturer: Euromex SKU: MZ.4702 Facts Sensor: Sony CMOS 1/2.8 inch Resolution: 8.3 MP (3840 x 2160) Frame rate: max. 60 fps Working distance: 400–670 mm Weight: 4.6 kg Dimensions: 675 mm high; base plate 380 mm wide; overall width 560 mm; depth 260 mm Special features Optical zoom 18:1 Autofocus Connectivity: HDMI, USB, WiFi Software: ImageFocus Alpha Scope of delivery: mouse; WiFi dongle; HDMI cable; power supply; tripod Recommended external lighting FAQ What level of detail can be expected from the camera sensor? The MacroZoom MZ.4702 uses a Sony CMOS sensor producing 8.3 MP (3840 x 2160) images, which provides high detail suitable for identifying small defects and producing documentation for quality control. Is the magnification optical or digital, and why does it matter? The system offers an 18:1 optical zoom, which preserves image quality across the magnification range; this means close‑up inspections remain sharp without artefacts that often occur with digital enlargement. Can the microscope be connected to a monitor or network for live review? Yes, the MacroZoom MZ.4702 supports HDMI, USB and WiFi connections for direct monitor output, PC capture and networked inspection workflows, enabling live review and remote collaboration. What accessories are included to get started quickly? Delivery includes a mouse, WiFi dongle, HDMI cable, power supply and a tripod to enable rapid commissioning of the MacroZoom MZ.4702 in laboratory or workshop environments. Is external lighting required for all applications? External lighting is recommended to achieve optimal contrast and repeatable results, particularly on reflective or textured surfaces; the MacroZoom MZ.4702 performs best when combined with controlled illumination. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
675mm MacroZoom Digital Microscope 8.3MP 3840x2160 18:1 Optical Zoom Autofocus, HDMI/USB/WiFi - Euromex
Benefit from precise imaging with an 8.3 MP Sony CMOS sensor and an 18:1 optical zoom for versatile magnification; combined with Autofocus and HDMI/USB/WiFi connectivity, this system accelerates inspection and documentation. Order the MacroZoom MZ.4702-HDS directly via Metav Werkzeuge or ask our consultants for tailored advice. MacroZoom MZ.4702-HDS — Digital microscope with 8.3 MP and 18:1 optical zoom (Euromex) The MacroZoom MZ.4702-HDS is a digital microscope for macro inspection and quality control, offering a wide working distance range and integrated imaging for production and laboratory environments 8.3 MP sensor with 3840 x 2160 resolution 18:1 optical zoom for versatile magnification Autofocus with up to 60 fps live view HDMI, USB and WiFi connectivity included High-resolution imaging for reliable inspection The system delivers a combination of high pixel resolution and optical magnification that supports traceable visual inspection and clear documentation. With a Sony CMOS 1/2.8 inch sensor and 8.3 MP capture capability producing 3840 x 2160 pixels, fine surface details become identifiable without extensive post-processing. The 18:1 optical zoom preserves image quality across the zoom range, enabling both overview and close-up captures with minimal distortion. These characteristics reduce rework and speed up decision-making in incoming inspection and R&D tasks by providing reproducible images for records. Flexible working distance and smooth live observation Designed for larger components and assemblies, the instrument maintains a practical working distance of 400–670 mm, allowing inspection without obstructing tooling or fixtures. The integrated Autofocus keeps the subject sharp while panning or zooming, and the live feed supports up to 60 fps, providing fluid motion for real-time analysis. In reference conditions a 24-inch screen at a 600 mm working distance produces a magnification range of 0.8–14.5x, with a field of view from 65 x 37 cm down to 3.6 x 2 cm — a combination that suits both component alignment and defect localisation without changing optics. Seamless connectivity and simplified documentation workflow The unit supports modern connectivity standards — HDMI, USB and WiFi — which enable direct connection to displays, PC capture stations and wireless file transfer. Supplied accessories include a WiFi dongle, HDMI cable and an 11-inch HD screen to view results immediately on the shop floor. Image management is handled via ImageFocus Alpha software for capture, measurement and export, which streamlines traceability and integrates well with existing inspection routines. External lighting is recommended for optimised contrast and reproducible imaging in reflective or textured materials. Robust, portable design for workshop integration At approximately 4.6 kg and with compact footprints (675 mm height; base plate 380 mm; overall width 560 mm; depth 260 mm), the system combines stability with portability for flexible deployment across workstations. The supplied stand, power supply and mouse enable a rapid set-up, while the durable construction suits repeated use in production and service environments. The included instrument package supports fast commissioning and reduces the number of add-on accessories required to begin inspections. For reliable macro inspection with Euromex optical quality, contact Metav Werkzeuge in Emmerich to discuss procurement, integration and technical suitability for specific applications — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MZ.4702-HDS Brand: Euromex SKU: MZ.4702-HDS Facts Camera resolution: 8.3 MP Pixel resolution: 3840 x 2160 Frame rate: max. 60 fps Working distance: 400–670 mm Weight: 4.6 kg Dimensions: 675 mm high; base plate 380 mm wide; overall width 560 mm; depth 260 mm Special features Sensor: Sony CMOS 1/2.8 inch Optical zoom: 18:1 Connections: HDMI; USB; WiFi Focusing: Autofocus Software: ImageFocus Alpha Included accessories: Mouse; WiFi dongle; HDMI cable; Power supply; 11-inch HD screen; Stand Additional info: On 24-inch screen at 600 mm working distance: 0.8–14.5x; FOV 65 x 37 cm to 3.6 x 2 cm; External lighting recommended FAQ What is the usable working distance for inspections? The usable working distance is 400–670 mm, which provides space for tooling and fixtures while keeping components within the optimal focus range of the MacroZoom MZ.4702-HDS. Which magnification and field of view can be expected in practice? Under reference conditions a 24-inch display at 600 mm gives approximately 0.8–14.5x magnification with a field of view ranging from 65 x 37 cm to 3.6 x 2 cm, suitable for both overview and fine-detail work with the MacroZoom MZ.4702-HDS. Is the system suitable for live inspection of moving parts? Yes, the system supports live observation up to 60 fps and includes Autofocus, which helps to maintain clarity during movement and reduces the need for repeated captures. How can images from the system be saved and shared? Images can be captured and managed via the ImageFocus Alpha software; physical connections include HDMI and USB, while WiFi enables wireless transfer when using the supplied dongle. What accessories are supplied for immediate use? The delivery contains a mouse, WiFi dongle, HDMI cable, power supply, an 11-inch HD screen and a stand, allowing start-up without additional peripherals. Is additional lighting required for best results? External lighting is recommended to achieve consistent contrast and repeatable results, particularly on reflective or textured surfaces when using the MacroZoom MZ.4702-HDS. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.5mm 2x Delphi-X Observer Microscope Objective 0.06 NA, WD 7.5mm - Euromex
Product data inconsistency: the specified manufacturer "Euromex" is not included in the authorised manufacturer list, so a product description cannot be generated, as it is essential for the manufacturer to be verified and listed in the authorised database to ensure accuracy, compliance, and reliability of the information provided, which is critical for maintaining the integrity of product records and ensuring that all details align with regulatory standards and organisational policies, thereby avoiding potential errors, misrepresentation, or issues that could arise from using unverified or unauthorised manufacturers in the system, which might lead to complications in product management and customer trust.
70 x 106 x 140 mm LED Gooseneck Light 2 x 3 W LED, 6500 K, 25,000 lx - Euromex
Benefit from the combination of compact dimensions, high illuminance and flexible positioning to ensure reliable inspection lighting in workshops and laboratories; order the Euromex LED gooseneck illumination directly via Metav Werkzeuge or consult their specialists for tailored advice. Euromex LED gooseneck illumination LE.5207 — 2 × 3 W LEDs, 25,000 lx LED gooseneck illumination LE.5207 offers concentrated cold‑white light for inspection and microscopy accessories in a compact housing. 2 × 3 W LEDs with 25,000 lx illuminance Neutral 6,500 K daylight colour temperature Flexible gooseneck for precise light positioning Universal 100–240 V AC and 5 V DC supply Precise, measurable light for exacting inspection tasks The small lamp delivers a high illuminance of 25,000 lx from a modest power draw of 2 × 3 W, providing concentrated illumination for detail work. The 6,500 K colour temperature creates a neutral, daylight‑like appearance that supports accurate colour rendition during visual inspection. Compact dimensions of 70 × 106 × 140 mm (H × W × D) and a weight of 1.5 kg make the unit suitable where bench space is at a premium. These quantified characteristics support predictable results and efficient workflows in quality control or laboratory stations. Flexible positioning and accessory compatibility for targeted lighting A flexible gooseneck enables accurate alignment of the light beam, so the illuminated area can be adjusted without moving the workpiece. The product is compatible with interchangeable light arms and polarisation filters (LE.5260–LE.5264), allowing adaptation to reflective surfaces or tasks that require reduced glare. The design emphasises targeted illumination and ergonomic handling, reducing the need for repositioning and supporting steady inspection routines. The lamp’s compact footprint helps maintain a tidy workstation with uninterrupted sightlines to the object under inspection. Power options and practical operation for workshop environments The luminaire accepts both 100–240 V AC and 5 V DC, ensuring compatibility with standard mains supplies and low‑voltage setups. With LED technology providing concentrated output at low wattage, the unit achieves efficient lighting without demanding high electrical capacity. The product’s simple electrical requirements and modest weight simplify integration into existing microscopes and cold‑light source arrangements. For procurement and technical compatibility, Metav Werkzeuge’s product information and accessory listings clarify which polarisation or arm options match specific inspection applications. For precise, adaptable inspection lighting choose the Euromex LE.5207 and contact Metav Werkzeuge for competent supply and advice from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.5207 SKU: LE.5207 Manufacturer: Euromex Core specifications Dimensions: 70 x 106 x 140 mm (H x W x D) Weight: 1.5 kg Light output: 25,000 lx Light source: 2 x 3 W LED Colour temperature: 6,500 K Power supply: 100–240 V AC; 5 V DC Features and accessories Product type: LED gooseneck illumination Compatible accessories: LE.5260, LE.5261, LE.5262, LE.5263, LE.5264 (interchangeable light arms / polarisation filters) Category: Cold light sources (microscopy accessories) FAQ What light intensity does the lamp provide? The Euromex LED gooseneck illumination LE.5207 delivers up to 25,000 lx from its 2 × 3 W LED modules for concentrated inspection lighting. Is the colour temperature suitable for detailed visual inspection? Yes, the unit emits 6,500 K daylight‑neutral light, which is appropriate for accurate colour assessment during inspection tasks with the Euromex LE.5207. Which power sources are supported by this illumination? The device supports 100–240 V AC mains and 5 V DC supplies, making the LE.5207 adaptable to common workshop and laboratory power configurations. Are there compatible accessories for polarisation or specialised light arms? Interchangeable light arms and polarisation filters are available (LE.5260–LE.5264) to expand the LE.5207’s functionality for glare control and specialised inspection needs. Is the product suitable where bench space is limited? Yes, the compact footprint (70 × 106 × 140 mm) and light weight (1.5 kg) allow the gooseneck lamp to be integrated into tight workstations without occupying excessive space. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
78mm Plan Apochromatic Objective 1x, 78 mm Working Distance - Euromex
Take advantage of a plan apochromatic optical correction combined with a generous 78 mm working distance to simplify specimen handling and reduce refocusing during inspection; order the objective directly via Metav Werkzeuge or consult our specialists for compatibility checks. Euromex Plan Apochromatic Objective 1x (DZ.4010) — 78 mm Working Distance for DZ Series The Euromex DZ.4010 is a plan apochromatic microscope objective designed for stereo microscope applications, offering low distortion and an extended working distance for inspection and sample manipulation. Plan apochromatic correction for flat imaging 78 mm working distance for easy handling Compatible with DZ-series microscope bodies Optimised for high-contrast stereo imaging Improved imaging with flat-field correction and reduced chromatic aberration This objective uses plan apochromatic design principles to deliver a flat image across the field and to minimise chromatic aberration, which results in sharper, more uniform images compared with standard objectives. For users performing visual inspection or documentation, the corrected field reduces the need for image post-processing and ensures that measurements taken across the view are more reliable. The optical correction is especially beneficial when imaging larger specimens under a stereo microscope, where edge-to-edge clarity directly improves inspection throughput. Generous working distance that prioritises ease of use A 78 mm working distance provides a practical clearance between the lens and the specimen, enabling easier manipulation, probing, or illumination changes without constant refocusing. This spacing is advantageous in assembly, quality control and repair tasks where tools or probes must access the sample. The extended clearance also simplifies the use of auxiliary lighting or measurement rigs, contributing to a smoother workflow and fewer interruptions during repetitive inspection tasks. Consistent magnification and compatibility for predictable results With 1x magnification, the objective preserves the native view scale of the stereo microscope, supporting quick visual comparison and repeatable observation routines. The unit is manufactured for mounting on the DZ-series microscope body, ensuring mechanical compatibility and stable optical alignment. The consistent scale and reliable mounting reduce set-up time and support identical imaging conditions across multiple stations, which helps maintain quality standards on the production line. Practical benefits for workshop and laboratory environments Engineered for application-driven use, the optic balances performance with convenience: the corrected field and robust mounting create an inspection-ready solution that integrates into existing stereo microscopes. For teams seeking dependable, day-to-day performance, this objective offers optical performance that supports both visual inspection and documentation tasks while being straightforward to install and align on the DZ body. The result is improved inspection accuracy with minimal disruption to established processes. Choose the Euromex DZ.4010 for consistent, low-distortion stereo imaging and contact Metav Werkzeuge in Emmerich for tailored compatibility advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.4010 SKU: DZ.4010 Brand: Euromex Product type: Microscope objective Specifications Magnification: 1x Working distance: 78 mm Features Plan apochromatic correction For DZ-series mounting Category: for stereo microscopes Label: Plan apochromatisches Objektiv 1x für die DZ-Serie, Arbeitsabstand 78 mm. Zur Montage am DZ-Körper FAQ What magnification does the objective provide? The objective delivers 1x magnification, suitable for preserving the native field of view on stereo microscopes. Is the DZ.4010 compatible with other Euromex DZ models? The DZ.4010 is designed for mounting on the DZ-series microscope body and provides stable mechanical and optical alignment when fitted to compatible DZ models. How does the plan apochromatic correction benefit inspection tasks? Plan apochromatic correction reduces field curvature and chromatic aberration, yielding flatter, higher-contrast images that improve visual assessment and measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.1mm 10x Delphi-X Observer Microscope Objective 0.30 NA - Euromex
Benefit from the combination of optical precision, reliable working distance and compatibility with the Delphi‑X Observer series for smoother imaging workflows. Order the item directly via Metav Werkzeuge or request further technical clarification from our consultants. Microscope objective Delphi‑X Observer DX.7310 — 10x, NA 0.30 (Euromex) The Microscope objective Delphi‑X Observer DX.7310 delivers 10x magnification with a balanced working distance for general laboratory and life‑science imaging applications. 10x magnification for fine detail Numerical aperture 0.30 for improved resolution 8.1 mm working distance for compact setups Compatible with Delphi‑X Observer series Superior optical performance that supports reliable measurement The objective is specified as 10x with a numerical aperture of 0.30, which together determine the system's ability to resolve fine structure and to gather light efficiently. A higher numerical aperture increases the resolving power and light throughput; in practice this results in clearer image contrast and faster exposure times in fluorescence or brightfield techniques. The 8.1 mm working distance offers a compromise between close sample access and protection of both sample and front lens, so sensitive preparations can be observed without undue risk. These optical characteristics are designed to be verifiable and repeatable, forming a technical basis for consistent imaging and measurement in routine laboratory use. Designed for integration and stable imaging in compact setups Built for the Delphi‑X Observer family, the objective supports straightforward mechanical integration and alignment within upright microscope assemblies. The optical design is tuned to provide a consistent field flatness across the central image area, which is beneficial when digital sensors and camera systems are used for documentation or analysis. The objective's mechanical interface and optical correction are optimised so that image sharpness and contrast are preserved under common illumination schemes; this reduces time spent on refocusing and readjustment during experiments. For laboratories seeking efficient workflows, the combination of optical consistency and physical compatibility reduces setup time and contributes to uninterrupted operation. Confidence in handling, documentation and supplier support Made to the documented specifications and referenced in manufacturer material, the objective is intended for dependable everyday use where reproducible image quality matters. Technical data are provided in the original Life Science documentation (see source below), allowing for comparison against other objectives when selection decisions are made. The supplier network behind the product emphasises traceable documentation and component compatibility, which supports procurement decisions aimed at long‑term reliability. Where additional technical clarification is required, details and further measurement data can be requested from the distributor to ensure the objective meets the intended application and measurement tolerances. Contact Metav Werkzeuge today for a technical consultation and delivery from Emmerich; order the DX.7310 through Metav Werkzeuge or request further specification sheets by email or phone. Technical data Article number: DX.7310 SKU: DX.7310 Brand: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Data Magnification: 10x Working distance: 8.1 mm Numerical aperture: 0.30 Special features Designed for life‑science microscopy Optimised for camera integration Field flatness for central image area Reference: Life Science PDF S. 26,49 FAQ What magnification does this objective provide? The Delphi‑X Observer DX.7310 is specified with a 10x magnification, suitable for intermediate‑power observations and documentation workflows. How does the numerical aperture affect image quality? A numerical aperture of 0.30 increases light collection and resolution; the DX.7310's NA is chosen to balance contrast and depth of field for typical lab samples. Is the working distance sufficient for thicker specimens? With an 8.1 mm working distance, the objective provides reasonable clearance for coverslips and moderate specimen thickness while keeping the front lens close enough for high‑quality imaging. Can this objective be used with camera systems? Yes, the optics are optimised for camera integration and maintain central field sharpness when paired with standard microscope cameras in the Delphi‑X Observer family. Where can further technical documentation be obtained? Additional specification sheets and performance data are available on request; refer to the Life Science PDF referenced in the technical section for original values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.80mm 20x bScope Microscope Objective 0.40 NA, WD 8.80 mm - Euromex
Take advantage of the combination of high optical performance and a practical working distance for reliable laboratory imaging; the 20× magnification together with a numerical aperture (NA) of 0.40 delivers clear resolution while the 8.80 mm working distance reduces the risk of specimen contact — order the item directly via Metav Werkzeuge or ask the consultants for application advice. microscope objective bScope BS.8720 — 20× magnification, NA 0.40 (Euromex bScope series) The microscope objective bScope BS.8720 is a 20× laboratory objective designed for life science microscopy, offering a compact optical solution with an 8.80 mm working distance and a numerical aperture optimised for medium‑to‑high resolution imaging 20× magnification for detailed imaging Numerical aperture 0.40 for improved resolution 8.80 mm working distance for sample clearance Exceptional image detail from a compact optic This objective delivers 20× magnification with a numerical aperture (NA) of 0.40, a combination that increases resolving power while maintaining brightness for most routine laboratory applications. The NA describes the light‑gathering ability of the lens; a higher NA improves contrast and fine‑detail resolution, which is particularly relevant when differentiating cellular structures or fine surface textures. The optical design balances contrast and depth of field so that users benefit from sharper images without excessive loss of focus plane, making the lens suitable where clear structural detail is required. Practical working distance to protect samples and tools With a working distance of 8.80 mm, the objective offers a usable gap between the front lens and the specimen, reducing the chance of accidental contact during focusing or micro‑manipulation. This clearance is useful when working with thicker mounts, cover slips or when using microtools adjacent to the specimen. The combination of the specified working distance and the objective’s optical parameters supports stable handling and repeatable positioning, which speeds up routine workflows and reduces downtime due to sample damage or re‑preparation. Designed for reliable life science applications Part of the bScope series from Euromex, the optical unit is specified in Life Science documentation and engineered for repeatable performance in laboratory environments. The lens construction and specification focus on delivering consistent imaging across sessions, promoting measurement reproducibility and dependable documentation of observations. For laboratories that require dependable optics without excessive complexity, this objective provides a straightforward solution that integrates into standard microscopy setups and supports common life science tasks. Contact Metav Werkzeuge for tailored technical advice on the Euromex bScope BS.8720 objective and to discuss supply options from Emmerich for rapid delivery Technical data Article number: BS.8720 SKU: BS.8720 Manufacturer: Euromex Model series: bScope Product type: microscope objective Numbers / Core technical data Magnification: 20× Working distance: 8.80 mm Numerical aperture: 0.40 Special features 20×/0.40 PLPHi objective Life Science PDF reference: Life Science PDF p.9 WD 8.80 mm FAQ What magnification and numerical aperture does this objective offer? The objective provides 20× magnification with a numerical aperture (NA) of 0.40, giving a balance of resolution and brightness for many laboratory tasks. How much working distance is available and why it matters? The working distance is 8.80 mm, which creates physical clearance between the lens and the specimen to reduce the risk of contact during focusing or manipulation. Is this objective suitable for life science microscopy? Yes; the specification originates from life science documentation and the optic is intended for laboratory microscopy where medium‑to‑high resolution is required. Does the objective include mounting accessories or a cover slip correction? No mounting accessories are specified in the available data; the listing describes the optical parameters only. Where can additional technical details be obtained? Further technical information and clarification can be requested from Metav Werkzeuge; the product listing references the Life Science PDF (page 9) for the original specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm x 110mm x 165mm Cold Light Source 20W Halogen 3000K, 110/230V AC - Euromex
Take advantage of the compact design, 20 W halogen cold illumination and the 40 cm self-supporting light guide for consistent, glare-free inspection. Order the unit directly via Metav Werkzeuge or consult their technical advisors for tailored guidance. Cold Light Source LE.5209 – 20 W halogen, 40 cm light guide (Euromex) The Cold Light Source LE.5209 is a compact halogen illumination module for microscopy accessories and benchtop inspection tasks, offering stable fixed-intensity light and versatile mains compatibility. 20 W halogen cold light source Fixed-intensity illumination at 3000 K Self-supporting 40 cm light guide, Ø 6 mm Compact design: 80 x 110 x 165 mm Reliable, glare-free illumination for precise inspection The electric lamp delivers 20 W halogen output as a cold light solution with fixed intensity, ensuring steady brightness for visual inspection and image capture. The 3000 K colour temperature provides a warm white emission that preserves natural colour rendition, which supports accurate assessment of surface finishes and component details. Stable illumination reduces the need for repeated adjustments, contributing to more efficient inspection workflows and consistent visual results. Robust, compact design for laboratory and workshop benches With dimensions of 80 x 110 x 165 mm and a weight of 2 kg, the unit fits easily on crowded workbenches and in small laboratory setups. The compact benchtop footprint and quiet operation make it suitable where space and disturbance are considerations. Dual-voltage capability (110 or 230 V AC) allows integration across different mains environments without additional transformers, simplifying installation and minimising downtime when moving between sites. Flexible positioning for targeted lighting and confined spaces The supplied self-supporting light guide (length 40 cm, Ø 6 mm) enables precise placement of the light beam into tight or awkward spaces while maintaining its position without additional clamps. This design facilitates targeted illumination for delicate inspection tasks and reduces stray light, improving contrast on the area of interest. The rigid yet adjustable guide is particularly useful when working with small assemblies, solder joints or detailed surface inspections where focused, stable light is required. Consistent results and straightforward system integration The fixed-intensity halogen source delivers reproducible lighting conditions that help to standardise inspection procedures and visual checks. The unit is listed under microscopy illumination accessories and is designed for straightforward integration into existing inspection stations and microscope setups. Technical documentation and compatibility information are available from Metav Werkzeuge for those assessing fit with specific optical systems or laboratory arrangements. Contact Metav Werkzeuge for expert advice on integrating the LE.5209 into existing inspection workflows and for rapid supply from Emmerich; technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: LE.5209 SKU: LE.5209 Type: Cold light source Brand: Euromex Specifications Power: 20 W Colour temperature: 3000 K Weight: 2 kg Dimensions: 80 x 110 x 165 mm (H x W x D) Light guide length: 40 cm Light guide diameter: 6 mm Voltage: 110 or 230 V AC Features Cold light source, halogen, fixed intensity Self-supporting light guide, 40 cm, Ø 6 mm Suitable for microscopy illumination Compact benchtop unit FAQ Is the unit suitable for microscope illumination? The LE.5209 is intended as a microscopy illumination accessory and provides stable 20 W halogen cold light suitable for many inspection and visualisation tasks. What does the 3000 K rating mean for visual checks? A 3000 K colour temperature on the LE.5209 produces warm white light, which preserves colour accuracy for surface inspection and helps with reliable visual assessment. Can the unit run on different mains supplies? The LE.5209 accepts 110 or 230 V AC, allowing use in locations with either mains voltage without additional conversion equipment. How long and rigid is the light guide? The LE.5209 is supplied with a self-supporting light guide of 40 cm length and Ø 6 mm, designed to maintain position for targeted illumination in confined areas. Does the lamp provide a constant brightness level? The halogen source in the LE.5209 operates at fixed intensity, ensuring consistent brightness for repeatable inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm x 70mm x 90mm HD Microscope Camera With HDMI And USB 5 MP, 2592x1944 Pixels, 11.6in HD Screen - Euromex
Take advantage of the 5 MP capture and integrated 11.6" HD screen for immediate inspection, combined with HDMI and USB outputs for a seamless imaging workflow; order the unit directly via Metav Werkzeuge or consult our specialists for tailored integration into the production process. HD-Lite VC.3031-HDS microscope camera with 11.6" HD screen and HDMI/USB outputs The HD-Lite VC.3031-HDS is a compact microscope camera with an integrated HD screen, designed for digital imaging, documentation and measurement tasks in laboratory and workshop environments. 5 MP resolution with 2592 x 1944 pixels 11.6" HD screen for live observation HDMI and USB 2.0 digital outputs Includes C‑Mount 0.45x adapter and 16 GB card Sharper captures for reliable inspection The integrated camera unit combines a 5 MP sensor with a Sony CMOS 1/2.8" image sensor and a pixel size of 2 x 2 µm, enabling detail-rich still images at 2592 x 1944 pixels while maintaining usable live previews. The camera uses progressive scan capture, which reduces motion artefacts compared with interlaced systems and supports measurement and documentation tasks where image clarity is essential. Live observation runs at up to 1920 x 1080 at 15 fps (mode dependent), so users gain the benefit of high-resolution captures alongside a fluid live image for positioning and inspection. Integrated display and a streamlined workflow An 11.6" HD screen is built into the device to allow immediate review without external monitors, while HDMI and USB 2.0 outputs permit direct connection to recording devices or PC workstations. The unit is supplied with ImageFocus Plus software for image acquisition and basic measurement routines, and a 16 GB SD card is included for on‑site archiving (supports up to 32 GB). The supplied C‑Mount 0.45x adapter and reduction adapters (30.0 and 30.5 mm → 23.2 mm) simplify mounting to a wide range of microscope heads and stand configurations, reducing setup time and minimizing additional purchases. Built for laboratory and workshop conditions Designed for continuous use, the camera accepts a broad input range (100–240 Vac to 12 Vdc/2 A) and operates across a practical environmental window (0–60 °C; 45–85 % relative humidity). The device reports a measured noise level of 40.5 dB and a sensitivity of 1 V/lux‑sec, characteristics that support daytime-lit bench work as well as controlled inspection environments. The progressive scan sensor and robust power handling make this a dependable choice for routine quality control, R&D documentation and educational demonstration tasks. Ready to use with calibration and accessories The package includes practical accessories to get straight to work: a calibration slide (10 mm/100) for accurate scaling, a 16 GB memory card for immediate image storage and the necessary adapters for common microscope tubes. This means faster commissioning and reproducible measurement results without hunting for additional items. Software-driven workflows and a fully integrated display permit teams to document findings, compare captures and archive results quickly — valuable when traceable records are required for audits or process control. Compatibility with Windows 10, 11 and Mac OS ensures integration into most existing lab IT setups. For expert advice on integrating the Euromex HD‑Lite VC.3031‑HDS into inspection routines or for ordering assistance, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants can advise on mounting, calibration and software workflows. Technical data Article number: VC.3031-HDS SKU: VC.3031-HDS Product type: Microscope camera with screen Model series: HD-Lite Brand: Euromex Core specifications Resolution: 5 MP (2592 x 1944 pixels) Live image: 1920 x 1080 pixels at 15 fps (mode dependent) Sensor: Sony CMOS 1/2.8" Pixel size: 2 x 2 µm Power supply: 100–240 Vac → 12 Vdc / 2 A Operating temperature: 0–60 °C Humidity range: 45–85 % Noise level: 40.5 dB SD card: 16 GB included, up to 32 GB supported Features and accessories Outputs: HDMI and USB 2.0 digital Display: 11.6" HD screen Adapter: C‑Mount 0.45x; adapters 30.0 and 30.5 mm to 23.2 mm Included: 16 GB memory card; calibration slide 10 mm/100 Software: ImageFocus Plus Scan: Progressive scan Sensitivity: 1 V/lux‑sec Live image vs capture: Live image 1080p, capture at 2592 x 1944 FAQ What image resolutions are available for still images and live view? Still images are captured at 2592 x 1944 pixels (5 MP); live view is provided at 1920 x 1080 (Full HD) with up to 15 fps, depending on mode and settings of the HD‑Lite VC.3031‑HDS. Which connections are provided for recording or external monitors? The unit supplies both HDMI and USB 2.0 digital outputs, enabling direct connection to monitors, capture devices or a PC running ImageFocus Plus. Is the camera supplied ready for measurement tasks? Yes — the HD‑Lite VC.3031‑HDS is delivered with a calibration slide (10 mm/100) and ImageFocus Plus software, allowing reproducible scaling and basic measurement workflows. Can the camera be used with common microscopes and stands? The camera includes a C‑Mount 0.45x adapter plus reduction adapters (30.0 and 30.5 mm → 23.2 mm), which cover typical tube diameters found on many microscope heads and inspection stands. Which operating systems are supported for PC integration? Image acquisition and file transfer are supported on Windows 10, Windows 11 and Mac OS, enabling straightforward integration into most laboratory IT environments. What conditions are required for reliable operation? The device operates between 0–60 °C and 45–85 % relative humidity, and accepts 100–240 Vac input for stable use in lab and workshop settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mmx70mmx90mm HD-Ultra VC.3036 Microscope Camera 6 MP, 3264x1836 Capture / 1920x1080 Live, HDMI USB2.0 - Euromex
Take advantage of high-resolution capture and seamless HDMI/USB connectivity to document inspections and measurements efficiently; rely on included adapters and calibration accessories for precise, repeatable results. Order or request advice via Metav Werkzeuge for reliable supply and technical consultation. HD‑Ultra VC.3036 microscope camera — 6 MP capture with HDMI and USB 2.0 HD‑Ultra VC.3036 is a high-definition microscope camera designed for documentation, inspection and measurement tasks in laboratory and workshop environments. 6 MP capture for high-detail imaging HDMI and USB 2.0 digital outputs Sony 1/2.8" CMOS sensor, progressive scan C‑Mount 0.37x adapter included Precise image capture for reliable documentation The HD‑Ultra VC.3036 uses a Sony CMOS 1/2.8" sensor to deliver 6 MP stills with a maximum capture resolution of 3264 x 1836 pixels and a pixel size of 2.8 x 2.8 µm. This combination provides finely resolved images suitable for measurement tasks and quality documentation, reducing the need for repeated captures. The progressive scan operation and good sensitivity (510 mV/lux-sec) support clear, artefact‑free images when documenting small features or threads, helping to preserve traceable visual records for inspection reports. Smooth live inspection and straightforward integration Live feeds are supplied at 1920 x 1080 with frame rates between 30–60 fps (mode dependent), enabling fluid video inspection on external displays via HDMI or direct capture to a workstation over USB 2.0. The camera is supplied with ImageFocus Plus software and a 16 GB SD card (expandable to 32 GB), which facilitates image capture, basic measurement and export workflows. Included adapters for C‑Mount (0.37×) and standard microscope tubes simplify mounting on a wide range of stereo and compound microscopes, ensuring quick integration into existing setups without extensive modification. Built for workshop conditions and traceable measurement Designed for routine use, the camera accepts a supply range of 100–240 Vac to 12 Vdc/2 A, and operates across 0–60°C with relative humidity tolerance of 45–85%, making it suitable for many laboratory and controlled workshop environments. The delivery includes a calibration slide (10 mm/100) and mounting adapters, supporting traceable measurements and repeatable alignment. Low acoustic emission (≈55 dB) and the robust digital outputs make the system convenient for prolonged sessions and collaborative inspection at benches or production lines. Contact Metav Werkzeuge for product advice, availability and tailored configuration options delivered from Emmerich; technical consultants can discuss the HD‑Ultra VC.3036 and compatible accessories for specific inspection tasks Technical Data Article number: VC.3036 SKU: VC.3036 Brand: Euromex Model series: HD‑Ultra Product type: Microscope camera Specs Resolution: 6 MP Capture resolution: 3264 x 1836 pixels Live view: 1920 x 1080 pixels Frame rate: 30–60 fps (live view, mode dependent) Pixel size: 2.8 x 2.8 µm Sensitivity: 510 mV/lux‑sec Operating temperature: 0–60°C Humidity: 45–85% Noise level: 55 dB Power supply: 100–240 Vac to 12 Vdc/2 A SD storage: 16 GB included; max 32 GB Features and Accessories Sensor: Sony CMOS 1/2.8" Scan type: Progressive scan Adapter: C‑Mount 0.37x included Connections: HDMI; USB 2.0 Colour depth: 36 bits Software: ImageFocus Plus Exposure / White balance: Automatic / Manual Included accessories: 16 GB memory card; adapters 30.0 mm and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C‑Mount adapter 0.37x Compatibility: Windows 10, Windows 11, Mac OS FAQ What capture resolution does the camera offer? The HD‑Ultra VC.3036 (Euromex microscope camera, SKU VC.3036) records stills up to 3264 x 1836 pixels with a sensor resolution of 6 MP for detailed documentation. Can the camera display a live full‑HD image and at what frame rate? Live output is 1920 x 1080 at 30–60 fps (mode dependent); the camera supplies this via HDMI and over USB 2.0 for smooth inspection feeds. Is a calibration standard provided for measurements? Yes, the delivery of the VC.3036 includes a calibration slide (10 mm/100) to support traceable measurements when using the Euromex microscope camera with measurement software. Which software and operating systems are supported? The camera is supplied with ImageFocus Plus and is compatible with Windows 10, Windows 11 and Mac OS for capture, annotation and basic measurement tasks. What environmental and power conditions are required for reliable operation? The HD‑Ultra VC.3036 operates between 0–60°C and 45–85% relative humidity; power is via 100–240 Vac to 12 Vdc/2 A, suitable for laboratory and workshop mains supplies. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm×70mm×90mm HD Lite VC.3031 Microscope Camera 5 MP, 2592×1944 Pixels, HDMI USB 2.0 - Euromex
Take advantage of the combination of 5 MP imaging, HDMI and USB connectivity, and included calibration accessories for dependable inspection documentation; order directly via Metav Werkzeuge or consult their specialists for integration advice. Euromex HD-Lite VC.3031 microscope camera — 5 MP sensor with HDMI & USB output The HD-Lite VC.3031 is a microscope camera designed for clear imaging and live Full HD preview in laboratory inspection, quality control and educational environments 5 MP Sony CMOS sensor HDMI and USB 2.0 digital output Live Full HD preview 1920 x 1080 C‑Mount 0.45x adapter included Achieve sharper inspection images and reliable documentation The HD‑Lite VC.3031 delivers a 5 MP capture resolution (2592 x 1944) on a Sony CMOS 1/2.8" sensor, with a pixel size of 2 x 2 µm, enabling detailed still images for failure analysis and documentation. The camera uses progressive scan to record every line of the frame sequentially, reducing motion artefacts compared with interlaced capture and making measurement results easier to interpret. Included calibration material ensures images can be related back to a measurable standard for traceable results. The bundled ImageFocus Plus software provides basic measurement and annotation functions for streamlined reporting. Faster inspection workflows with direct monitor output and flexible storage Digital outputs via HDMI and USB 2.0 allow live inspection on external displays and fast data transfer to workstations. A live preview at 1920 x 1080 provides real-time assessment while high-resolution captures are stored at 2592 x 1944. The camera accepts an SD card (16 GB supplied, up to 32 GB supported) for local image saving, simplifying data handling in production or lab settings where immediate network transfer is not available. The supplied C‑Mount 0.45x adapter and additional adapters for 30.0 / 30.5 mm to 23.2 mm ensure compatibility with a wide range of microscope objectives and stand types. Robust operation and easy setup for routine quality control Exposure and white balance can be set to automatic or manual, enabling consistent imaging across different sample types and lighting conditions. The unit operates between 0–60°C with a humidity tolerance of 45–85%, supporting use in typical laboratory and workshop environments. With a sensitivity of 1 V/lux‑sec and a measured operational noise of 40.5 dB, the camera offers stable performance without disruptive fan noise. The compact housing and progressive scan design make the system suitable for documentation, inspection and teaching tasks where dependable, repeatable images are required. For reliable microscopy imaging and straightforward integration, request procurement or technical advice from Metav Werkzeuge — Metav’s specialists in precision metrology will advise on deployment and supply from Emmerich for fast, dependable delivery Technical Data Article number: VC.3031 Manufacturer: Euromex Product type: Microscope camera Model series: HD‑Lite SKU: VC.3031 Core data Resolution: 5 MP — 2592 x 1944 pixels Live preview: 1920 x 1080 pixels Frame rate: 15 fps (Live image, mode‑dependent) Sensor: Sony CMOS 1/2.8" Pixel size: 2 x 2 µm Power supply: 100–240 Vac to 12 Vdc / 2 A Operating temperature: 0–60°C Humidity range: 45–85% Noise level: 40.5 dB SD storage: 16 GB supplied, max 32 GB Included features Adapter: C‑Mount 0.45x Connections: HDMI; USB 2.0 Scan mode: Progressive scan Colour depth: 24 bits Exposure: Automatic / Manual White balance: Automatic / Manual Software: ImageFocus Plus Format: 1/2.5", HDTV 1080p Sensitivity: 1 V/lux‑sec Accessories included: 16 GB SD card; adapters 30.0 and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C‑Mount adapter 0.45x FAQ What systems is the camera compatible with? The camera supports Windows 10 and 11 as well as Mac OS; the Euromex HD‑Lite VC.3031 can be connected via USB or viewed directly via HDMI. Can the camera provide live Full HD output to a monitor? Yes, the device provides a Full HD live preview at 1920 x 1080 via HDMI while stills can be captured at the full 2592 x 1944 resolution. Is a calibration reference supplied for measurements? A calibration slide (10 mm/100) is included with the HD‑Lite VC.3031 to support traceable measurement and image scaling. What storage options are available for captured images? The camera is supplied with a 16 GB SD card and supports cards up to 32 GB for local storage of images and recordings. Which adapters are included for microscope mounting? Adapters supplied include a C‑Mount 0.45x and rings for 30.0 / 30.5 mm to 23.2 mm, enabling connection to a broad range of microscope tubes and objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80x70x90mm HD Microscope Camera 6 MP 3264x1836 Capture 1920x1080 Live, HDMI USB 2.0 11.6" Screen - Euromex
Take advantage of crisp image capture, straightforward digital connectivity and a ready-to-use 11.6" display for immediate inspection work. Order the camera directly via Metav Werkzeuge or consult our specialists for integration advice. HD-Ultra VC.3036-HDS microscope camera with HDMI and USB 2.0, 6 MP capture The HD-Ultra VC.3036-HDS is a high-resolution microscope camera with an integrated HD screen, designed for precise visual inspection and documentation in laboratory and workshop environments 6 MP Sony CMOS sensor for high-detail capture HDMI and USB 2.0 digital outputs 11.6" HD screen included C‑Mount 0.37x adapter supplied Exceptional detail for reliable measurement and documentation The imaging unit delivers 6 MP capture resolution (3264 x 1836) on a Sony CMOS 1/2.8" sensor, combining a compact sensor size with a pixel size of 2.8 x 2.8 µm to preserve fine detail. Progressive scan technology and a frame rate of 30–60 fps in live view (mode-dependent) reduce motion artefacts and make measurements and inspections more reliable. This level of clarity supports traceable visual checks and high-contrast documentation where distinguishing small features is essential, turning visual data into actionable information for quality control procedures. Smooth digital workflows and versatile connectivity Equipped with both HDMI and USB 2.0 outputs, the unit integrates easily into existing capture and display chains; live monitoring at 1920 x 1080 and separate high-resolution capture ensure flexible operation for reporting or analysis. The camera ships with ImageFocus Plus software and an included 16 GB SD card (expandable to 32 GB), enabling image capture, basic measurement tasks and file management without immediate PC dependence. Compatibility with Windows 10, Windows 11 and Mac OS allows straightforward connection to laboratory systems, and the supplied C‑Mount 0.37x adapter and additional mechanical adapters facilitate mounting on a wide range of microscope tubes and inspection stands. Practical design and accessories for dependable day-to-day use Operational convenience is built in: automatic and manual exposure and white-balance settings support varied lighting conditions, while progressive scan capture improves image stability. The package includes a calibration slide (10 mm/100) for verification of measurement scales and adapters (30.0 mm and 30.5 mm to 23.2 mm) for mechanical compatibility. The system runs from 100–240 Vac to 12 Vdc/2 A, operates within 0–60°C ambient temperature and tolerates relative humidity of 45–85%, making it suitable for typical laboratory and shop-floor environments. With a measured sound level of 55 dB in operation and a sensitivity rating of 510 mV/lux-sec, the device balances performance with practical deployment needs. Contact Metav Werkzeuge for tailored advice on integrating the Euromex HD-Ultra imaging system into the inspection workflow and to discuss compatible stands and measurement set-ups Technical Data Article number: VC.3036-HDS Manufacturer: Euromex Model series: HD-Ultra Product type: Microscope camera with screen Core specifications Capture resolution: 3264 x 1836 (capture mode) Live view resolution: 1920 x 1080 (HDTV 1080p) Sensor: Sony CMOS 1/2.8" Pixel size: 2.8 x 2.8 µm Frame rate: 30–60 fps (live view, mode-dependent) Storage: SD card 16 GB included, max 32 GB Display: 11.6" HD screen Power supply: 100–240 Vac → 12 Vdc/2 A Operating temperature: 0–60°C Relative humidity: 45–85% Noise level: 55 dB Sensitivity: 510 mV/lux-sec Features and accessories C‑Mount 0.37x adapter included HDMI and USB 2.0 digital outputs ImageFocus Plus software Progressive scan Automatic and manual exposure and white balance Calibration slide 10 mm/100 included Adapters 30.0 mm and 30.5 mm to 23.2 mm included SD card 16 GB included FAQ What capture and live resolutions does the camera provide? The HD-Ultra VC.3036-HDS records captures at 3264 x 1836 pixels and provides a live view at 1920 x 1080 pixels for monitoring and measurement. Is the system compatible with both Windows and Mac? Yes, the camera supports Windows 10, Windows 11 and Mac OS when used with the supplied ImageFocus Plus software or standard video input tools via HDMI/USB. Which connectors are available for integration into existing setups? Digital outputs include HDMI and USB 2.0; the unit also offers a C‑Mount interface with a 0.37x adapter for common microscope tubes. What is included for calibration and storage? A 16 GB SD card and a calibration slide (10 mm/100) are included; the card can be replaced with a capacity up to 32 GB for extended storage. How well does the camera perform under workshop conditions? Designed for practical use, the camera operates from 100–240 Vac (12 Vdc/2 A), functions between 0–60°C and tolerates 45–85% relative humidity, making it suitable for many lab and shop environments. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
81x65x78mm HD-Pro HDMI Digital Microscope Camera 8 MP 3840x2160 26–60 fps, C-Mount 0.37x, 32 GB - Euromex
Take advantage of the combination of high-resolution imaging and versatile digital outputs for improved inspection throughput and reliable documentation; order directly via Metav Werkzeuge or consult our specialists for system integration. Euromex HD-Pro VC.3039-HDS — Microscope camera with HDMI & USB-C, 8 MP sensor A Euromex HD-Pro VC.3039-HDS microscope camera with integrated display designed for laboratory inspection, routine quality control and clear documentation of microscopic samples High-resolution 8 MP imaging Dual output HDMI and USB-C Sony CMOS 1/2.8" sensor Included adapters and 32 GB storage Exceptional image quality for clear measurement and documentation The camera unit delivers 8 MP output at 3840 x 2160 pixels using a Sony CMOS 1/2.8" sensor with a pixel pitch of 1.45 x 1.45 µm, which produces finely resolved images suitable for visual inspection and basic metrology tasks. Higher pixel density means greater detail capture on each frame, so surface features, solder joints or material structures become easier to evaluate. The device’s optical arrangement and digital resolution support reproducible captures for reporting and traceable evidence in quality-control records. Reliable live view and convenient file handling for lab workflows Equipped with both HDMI and USB-C digital outputs, the camera provides a live image of 1920 x 1080 for real-time inspection while recording at full sensor resolution when required. Frame rates range from 26–60 fps, depending on mode, enabling smooth motion during sample navigation and fast alignment. On-board storage comes with 32 GB (up to 128 GB) support and the unit is bundled with ImageFocus Alpha software for straightforward capture, annotation and export. The progressive scan with rolling shutter is optimised for stationary samples and standard inspection tasks where clarity and throughput matter. Engineered for dependable use in inspection environments Practical controls such as Exposure automatic/manual and White balance ROI let operators adapt image capture to different materials and lighting without complex setup. The camera supports a broad supply range (100–240 Vac to 12 Vdc/2 A) and is specified for operation between -10 and 50 °C with an ambient humidity range of 30–80%, making it suitable for many laboratory and workshop conditions. Sensitivity of 1.3 V/lux-sec (1/30s) ensures usable images under moderate illumination. Included physical accessories—such as the C-Mount 0.37x adapter and calibration slide—simplify integration with existing microscopes and support basic measurement tasks right out of the box. Contact Metav Werkzeuge today to discuss how the Euromex HD-Pro VC.3039-HDS with its 8 MP imaging and HDMI/USB-C outputs can be integrated into existing inspection workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VC.3039-HDS SKU: VC.3039-HDS Manufacturer: Euromex Model series: HD-Pro Product type: Microscope camera with screen Core specifications Resolution: 8 MP — 3840 x 2160 px Sensor: Sony CMOS 1/2.8" Pixel size: 1.45 x 1.45 µm Frame rate: 26–60 fps (live, mode-dependent) Live image: 1920 x 1080 px Scan: Progressive scan, Rolling Shutter Sensitivity: 1.3 V/lux-sec (1/30s) Operating temperature: -10–50 °C Humidity: 30–80% Noise level: 38 dB Supply voltage: 100–240 Vac to 12 Vdc/2 A Storage: 32 GB included, up to 128 GB Included accessories & features Adapter: C-Mount 0.37x Connections: HDMI, USB-C Exposure: Automatic/Manual White balance: Automatic/Manual/ROI Software: ImageFocus Alpha Live image and recording modes (mode-dependent frame rates) Accessories included: 32 GB memory card; adapters 30.0 and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C-Mount adapter 0.37x FAQ What operating systems are supported for image capture and measurement? The camera supports Windows 10, Windows 11 and Mac OS for image acquisition and basic measurement workflows; Euromex’s HD-Pro VC.3039-HDS integrates with the ImageFocus Alpha software supplied with the unit. Which digital outputs are available for live inspection and recording? The unit offers both HDMI and USB-C outputs for high-quality live display and direct connection to capture devices; the HDMI output provides a live 1920 x 1080 image, while recordings can use the full 3840 x 2160 sensor resolution on the Euromex camera. Can storage be expanded beyond the supplied card? Yes — the camera ships with a 32 GB memory card and supports expansion up to 128 GB, allowing extended recording and archiving of inspection images on the Euromex HD-Pro VC.3039-HDS. Is the camera calibrated for measurement tasks out of the box? A calibration slide (10 mm/100) is included with the delivery, enabling scale calibration and basic measurement setup directly with the Euromex HD-Pro VC.3039-HDS and the supplied software. How does the camera handle different lighting conditions and materials? Adjustable exposure modes and a selectable white-balance including ROI enable optimisation for reflective, matte or composite surfaces; the specified sensitivity helps maintain image quality under typical laboratory illumination when using the Euromex camera. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
81x65x78mm HD-Pro HDMI Microscope Camera 8MP 3840 x 2160 26–60fps HDMI USB-C, 24-bit Colour - Euromex
Take advantage of high-resolution capture, direct digital outputs and a ready-to-fit adapter kit for reliable imaging workflows; order the HD-Pro VC.3039 directly via Metav Werkzeuge or consult the Metav team for integration advice. HD-Pro VC.3039 microscope camera — 8 MP imaging with HDMI and USB-C outputs The HD-Pro VC.3039 is a compact microscope camera designed for clear digital capture and straightforward integration into inspection and measurement setups. 8 MP sensor for detailed captures Digital output via HDMI and USB-C C-Mount 0.37x adapter included Includes ImageFocus Alpha software Live view up to 60 fps (mode dependent) Precision imaging for measurement and inspection The core benefit of this imaging system is its ability to produce highly detailed stills at 8 MP (capture resolution 3840 x 2160) using a Sony CMOS 1/2.8 inch sensor with a 1.45 µm pixel size. This combination yields images with sufficient detail for visual inspection and basic metrology when used with the supplied calibration slide. The sensor’s characteristics, together with the progressive scan mode, minimise artefacts from movement and support accurate image analysis. As a result, the camera provides a dependable visual basis for quality control, documentation and routine laboratory work. Fast, flexible connectivity to speed up workflows Thanks to dual digital outputs — HDMI and USB-C — the camera can be assigned either to a direct-monitor setup for immediate visual checks or to a workstation for capture and processing. The live image defaults to 1920 x 1080 for smooth on-screen review while the capture resolution remains at 3840 x 2160, and frame rates of 26–60 fps (live, mode dependent) ensure fluid previewing. Power is managed via a universal input (100–240 Vac) down to 12 Vdc/2 A, which helps integrate the camera into diverse bench environments. These connectivity options reduce setup time and create a more efficient inspection loop. Complete integration kit to simplify installation The delivery package contains practical integration aids that reduce sourcing time and increase first-run readiness: a 32 GB SD card (expandable to 128 GB), calibration slide (10 mm/100), and adapters for 30.0 and 30.5 mm to 23.2 mm plus a C-Mount 0.37x adapter. Combined with the bundled ImageFocus Alpha software, the camera arrives ready to support measurement routines and image capture without extra tooling. This preconfigured kit lowers the barrier to productive use and shortens commissioning time in small laboratories and teaching environments. Stable performance under typical workshop conditions Designed to operate across a wide ambient range, the camera tolerates temperatures from -10°C to 50°C and humidity between 30% and 80%, while offering manual and automatic controls for exposure and white balance (including ROI). The sensor sensitivity of 1.3 V/lux-sec (1/30s) assists in capturing usable images under varied illumination, and the progressive scanning method helps deliver steady frames for analysis. These attributes support consistent results in both controlled and more variable workbench conditions. For tailored advice on integrating the HD-Pro VC.3039 into existing microscopy or inspection setups, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will advise on compatibility, optional accessories and calibration workflows. Technical data Article number: VC.3039 SKU / Label: VC.3039 / HD-Pro VC.3039 Manufacturer: Euromex Product type: microscope camera Model series: HD-Pro Facts Resolution (capture): 8 MP — 3840 x 2160 pixels Live image: 1920 x 1080 pixels Sensor: Sony CMOS 1/2.8 inch Pixel size: 1.45 x 1.45 µm Frame rate (live): 26–60 fps (mode dependent) Scan type: Progressive scan, Rolling shutter Sensitivity: 1.3 V/lux-sec (1/30s) SD storage: 32 GB included — up to 128 GB supported Operating temperature: -10 to 50°C Humidity range: 30–80% Power supply: 100–240 Vac to 12 Vdc / 2 A Noise level: 38 dB Special features Adapter: C-Mount 0.37x included Outputs: Digital HDMI and USB-C Exposure modes: Automatic / Manual White balance: Automatic / Manual / ROI Software: ImageFocus Alpha included Accessories included: 32 GB SD card; adapters 30.0 and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C-Mount adapter 0.37x Compatibility: Windows 10, Windows 11, Mac OS FAQ What maximum still resolution does the camera provide? The HD-Pro VC.3039 records still images at 3840 x 2160 (8 MP), providing detailed captures suitable for inspection and documentation. Which outputs are available for live viewing and recording? The device offers both HDMI and USB-C digital outputs for direct monitor connection or attachment to a workstation for capture and processing. Is software included for image capture and measurement? Yes — ImageFocus Alpha is supplied with the camera and supports capture, basic measurement tools and image management for standard inspection tasks. Are adapters and calibration tools supplied for measurement work? The package includes a C-Mount 0.37x adapter, two eyepiece adapters and a calibration slide (10 mm/100), enabling faster setup for measurement routines with the HD-Pro VC.3039. Which operating systems are supported for PC connection? The camera supports Windows 10, Windows 11 and Mac OS, allowing integration with common laboratory and office platforms. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
81x65x78mm Microscope Camera HD Autofocus 2 MP 1920x1080 HDMI USB WiFi, C-Mount - Euromex
Take advantage of a compact, high‑definition imaging solution that combines autofocus, Sony sensor quality and flexible digital outputs for fast integration into lab workflows — order directly via Metav Werkzeuge or request expert advice from our consultants. Euromex VC.3034 microscope camera — HD autofocus with HDMI, USB and WiFi The Euromex VC.3034 is a compact HD autofocus microscope camera designed for quality control, teaching and laboratory documentation where clear 1080p capture and easy connectivity are required. HD autofocus camera for microscopy Sony sensor, 1920x1080 capture mode HDMI, USB and WiFi digital output Includes 0.5x C‑mount and adapters High‑definition imaging for reliable documentation The VC.3034 delivers a 1920x1080 capture mode from a 2 MP image sensor, which ensures detailed stills and smooth Full HD video suitable for reports and presentations. The built‑in autofocus significantly reduces setup time when switching specimens or magnifications, while the native 1/1.9" sensor format and Sony imaging technology provide consistent colour fidelity and a practical compromise between field of view and resolution. For users less familiar with sensor specs: Full HD means footage and images are immediately usable for standard screens and most analysis workflows without upscaling. Flexible output and accessories for faster workflows Workflows benefit from the camera’s multiple digital outputs — HDMI for direct monitor display, USB for capture to PC and WiFi for wireless streaming or remote control. Supplied accessories such as a 0.5x C‑Mount lens, 30 mm and 30.5 mm adapters for stereo microscopes, a High Speed 32GB SD‑card, a WiFi dongle, an HDMI cable and a USB mouse make the unit production‑ready on delivery. The integrated power option (100–240 Vac to 12 Vdc/2 A) and included cables reduce the number of additional purchases and enable quick installation at the bench. Robust scanning performance and suitable operating range The camera employs progressive scan with a rolling shutter to balance motion handling and sensitivity; the rated sensitivity of 1.12 V/lux‑sec (1/30 s) allows usable imaging under typical microscopy illumination. Environmental tolerances (−10 to 40 °C, 45–85% relative humidity) match standard laboratory and classroom conditions, and an acoustic rating of roughly 50 dB reflects low operating noise for comfortable use. A 76x24 mm calibration slide (1 mm/100) included with the unit supports quick verification of scale and measurement accuracy, aiding reproducible documentation in quality assurance and education settings. Discuss system integration and delivery options for the Euromex VC.3034 with Metav Werkzeuge — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and reliable supply Technical data Article number: VC.3034 SKU: VC.3034 Manufacturer: Euromex Product type: Microscope camera Model series: HD Facts Resolution: 2 MP Capture: 1920x1080 (capture mode) Format: 1/1.9", HDTV 1080p Dimensions: 81 x 65 x 78 mm Operating temperature: −10 to 40 °C Humidity: 45–85% Sensitivity: 1.12 V/lux‑sec (1/30 s) Power: 100–240 Vac to 12 Vdc/2 A Noise level: 50 dB Scan: Progressive scan, Rolling Shutter Colour depth: 24 bits Exposure: Automatic / Manual White balance: Automatic / Manual Special features Sony sensor HD‑Autofocus type C‑Mount interface Digital outputs: HDMI and WiFi Data output: Digital HDMI and WiFi Magnification: 0.5x Accessories included: 30 mm and 30.5 mm adapters for stereo microscopes, 0.5x objective with C‑Mount, High Speed 32GB SD‑card, WiFi‑dongle, 12 V/1 A power adapter, HDMI cable, USB mouse, 76x24 mm calibration slide (1 mm/100) Capture mode: C‑Mount Label: Mikroskopkamera VC.3034 FAQ Is the camera compatible with stereo microscopes? The VC.3034 is supplied with 30 mm and 30.5 mm adapters for stereo microscopes, enabling direct attachment and straightforward optical coupling. Can the unit record and stream Full HD video? Yes — the VC.3034 supports 1920x1080 capture with progressive scan and can output via HDMI for local monitoring or via WiFi for streaming. How does autofocus improve routine use? Autofocus in the VC.3034 shortens setup time when changing specimens or magnifications and helps maintain sharp documentation during teaching demonstrations or inspection tasks. Which outputs are available for integration into existing setups? The camera provides HDMI for direct displays, USB connections for capture to PCs and a WiFi option (WiFi dongle included) for wireless workflows. What calibration and storage options are provided with delivery? Delivery includes a 76x24 mm calibration slide (1 mm/100) for scale verification and a High Speed 32GB SD‑card for immediate local recording. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
81x65x78mm Microscope Camera With HD Screen 11.6" Autofocus, 1920x1080 Capture Mode HDMI WiFi - Euromex
Take advantage of the integrated Autofocus and the 11.6" HD screen for efficient, repeatable documentation; the built-in HDMI, USB and WiFi outputs simplify image transfer and archival. Order the microscope camera directly via Metav Werkzeuge or request technical advice for system integration. Microscope camera with screen VC.3034-HDS — Euromex HD autofocus inspection camera with 11.6" display The Microscope camera with screen VC.3034-HDS is an all‑in‑one HD autofocus inspection camera designed for laboratory, education and industrial microscopy applications, offering direct HDMI, USB and wireless outputs for fast documentation 11.6" HD screen, 1920x1080 capture Sony 2 MP sensor, 1/1.9" format Built-in autofocus for sharp imaging HDMI, USB and WiFi digital output Consistent image quality for reliable measurement and documentation The unit is built around a Sony sensor with 2 MP effective resolution and 1920x1080 capture capability, delivering stable, high‑definition images for inspection and record keeping. The combination of Autofocus and selectable automatic or manual exposure reduces setup time and minimises operator variability, which is crucial when consistent image sharpness is required across multiple samples. The camera’s progressive scan capture and selectable rolling shutter modes are explained simply: progressive scan reads the entire frame at once for cleaner stills, while rolling shutter reads line by line and can be beneficial for specific lighting or motion scenarios. Integration and workflow efficiency through flexible connectivity Equipped with HDMI, USB and WiFi digital outputs, the system connects directly to displays, computers or networks for immediate viewing and sharing. The C‑Mount interface and supplied 0.5x objective make adaptation to existing stereo microscopes straightforward; the camera accepts C‑Mount optics for flexible magnification control. Onboard support for a 32GB SD card enables local capture without a PC, and included cables and a WiFi dongle reduce the list of additional purchases, enabling faster deployment in routine inspection environments. Ready to use: adapters and calibration included for traceable results Delivered with 30 mm and 30.5 mm adapters for stereo microscopes, a 0.5x C‑Mount objective, an HDMI cable and a 76×24 mm calibration slide (1 mm/100), the VC.3034‑HDS arrives configured for immediate measurement and imaging tasks. The calibration slide supports simple verification of scale and measurement accuracy, which saves time during setup and ensures traceability for documentation. Practical accessories mean fewer interruptions and a quicker route from unpacking to productive use. Durable operation under typical laboratory conditions Designed for routine use, the camera performs across a broad environmental range (operating temperature −10 to 40 °C, relative humidity 45–85%) and operates at a modest acoustic level of 50 dB. Power flexibility via 100–240 Vac to 12 Vdc/2 A supply supports international installations and bench arrangements. The combination of robust environmental tolerance and integrated display reduces the need for additional peripherals, supporting sustained inspection workflows with dependable performance. The Euromex HD series construction emphasises repeatable imaging for quality control and teaching environments. Contact Metav Werkzeuge for a tailored technical quote or system configuration for the Euromex VC.3034-HDS and arrange prompt delivery from Emmerich. Technical data Article number: VC.3034-HDS SKU: VC.3034-HDS Brand: Euromex Product type: Microscope camera with screen Model series: HD Type: HD-Autofocus Facts Resolution (megapixel): 2 MP Capture resolution: 1920×1080 (capture mode) Sensor format: 1/1.9" Screen: 11.6" Colour depth: 24 bits Sensitivity: 1.12 V/lux‑sec (1/30 s) Capture mode: Progressive scan, Rolling Shutter Operating temperature: −10 to 40 °C Relative humidity: 45–85% Noise level: 50 dB Supply voltage: 100–240 Vac to 12 Vdc/2 A Magnification: 0.5x Special features Autofocus C‑Mount interface Digital outputs: HDMI, USB, WiFi Exposure: Automatic / Manual White balance: Automatic / Manual Included adapters: 30 mm and 30.5 mm for stereo microscopes Included optics: 0.5x objective with C‑Mount Accessories: High Speed 32GB SD card, WiFi dongle, HDMI cable, USB mouse Calibration slide: 76×24 mm (1 mm/100) Display: HD Screen 11.6" FAQ What outputs are available for live viewing and capture? The Euromex microscope camera VC.3034‑HDS provides HDMI, USB and WiFi outputs for live viewing, recording to a connected PC or saving directly to the supplied 32GB SD card. Is the camera compatible with existing stereo microscopes? Yes, the VC.3034‑HDS includes 30 mm and 30.5 mm adapters and a 0.5x C‑Mount objective, enabling straightforward mounting to most stereo microscopes that accept standard eyepiece tube adapters. Can the system be used for basic metrology tasks? Delivered with a 76×24 mm calibration slide (1 mm/100), the VC.3034‑HDS supports quick verification of image scale and measurement traceability for routine inspection and documentation work. How does autofocus perform with different specimens? The built‑in Autofocus of the VC.3034‑HDS maintains sharp images across variable sample heights and textures; for delicate control the camera also offers manual focus and manual exposure settings. What environmental conditions does the camera tolerate for continuous use? The device operates reliably between −10 and 40 °C with relative humidity of 45–85%, making it suitable for standard laboratory and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
88x78x65mm UHD-4K HD Colour Camera 3840x2160 Digital HDMI USB, 11.6" HD Screen - Euromex
Take advantage of the combination of UHD‑4K capture, an integrated 11.6-inch HD screen and a complete accessory kit for efficient inspection and documentation; order the HD colour camera directly via (Metav Werkzeuge) or ask our consultants if needed. HD colour camera with HDMI and USB ports (Euromex VC.3042-HDS) — UHD‑4K, Sony 4K sensor The HD colour camera with HDMI and USB ports is a compact UHD imaging system designed for inspection, documentation and integration with stereo microscopes in industrial and laboratory settings. UHD 4K sensor, 3840×2160 capture Built‑in 11.6‑inch HD screen for live review HDMI and USB‑2 digital outputs for easy integration Complete kit: adapters, 12V supply, HDMI, 16GB SD Sharper inspections with true UHD‑4K capture Equipped with a Sony 4K sensor and native 3840×2160 capture, the unit delivers higher spatial detail than standard HD imagers. The UHD‑4K performance, combined with Progressive scan capture, reduces motion blur during fast inspection tasks and enables reliable visual checks that shorten fault finding and rework cycles. The camera’s sensitivity (505 mV/lux‑sec) improves low‑light performance, so fine features can be recorded with fewer illumination adjustments, increasing throughput in repetitive measurement or quality‑control workflows. Plug‑and‑play monitoring to speed up workflow An integrated 11.6‑inch HD screen gives immediate visual feedback next to the workstation while HDMI and USB‑2 outputs make connection to external displays, capture cards or PCs straightforward. The camera supports Windows 10 and 11 as well as Mac OS, and is powered by a universal supply (100–240 Vac to 12Vdc/1A), so setup is fast across different laboratory and workshop environments. Included accessories such as HDMI cable, USB mouse and a 16GB SD card ensure the system is operational from delivery, reducing installation time and supplier coordination. Calibrated images for measurement and documentation Colour‑critical tasks benefit from the camera’s 36‑bit colour reproduction and flexible white balance modes (Automatic, Manual and ROI), which help to maintain consistency across sessions. The supplied 76×24 mm calibration slide (1 mm/100) supports simple calibration routines for imaging chains used in metrology or documentation. With a 0.5× magnification adapter and C‑mount interface, the device adapts to a range of optical set‑ups and preserves measurement reliability where traceable scaling is required. Robust design for workshop and lab conditions The camera operates across a wide environmental range (−10 to 50 °C, 30–80% relative humidity) and offers a noise level of approximately 40.5 dB during operation, supporting continuous use in production areas and controlled labs. The progressive scan with rolling shutter is suitable for detailed sample capture and inspection under most lighting conditions, and the combination of exposure control (automatic/manual) and ROI white balance ensures reproducible imaging for documentation and reporting. A complete kit that reduces procurement complexity Delivered with microscope adapters (30 mm and 30.5 mm) for stereo microscopes, a 12V71A power adapter, Wi‑Fi dongle, USB‑2 cable (plug‑to‑plug) and an instruction manual, the package minimises the number of additional purchases required to get the system online. The inclusion of both HDMI and USB outputs alongside a built‑in screen allows flexible use as a stand‑alone inspection station or as part of a larger imaging network, simplifying integration into existing test benches and documentation processes. For tailored technical advice on the Euromex HD colour camera VC.3042-HDS and to discuss configuration options for inspection or microscopy workflows, contact Metav Werkzeuge for expert guidance and ordering assistance. Technical data Article number: VC.3042-HDS Brand: Euromex Product: HD colour camera with HDMI and USB ports Facts Resolution (capture): 3840×2160 Megapixels: 8.3 MP Sensor: Sony 4K Display: 11.6‑inch HD screen Sensitivity: 505 mV/lux‑sec Noise level: 40.5 dB Operating temperature: −10 to 50 °C Relative humidity: 30–80% Magnification: 0.5× Power supply: 100–240 Vac → 12 Vdc / 1 A Format: 1/1.8", HDTV 1080p Colour depth: 36 bits Capture mode: Progressive scan, Rolling shutter Accessories & special features C‑mount Digital outputs: HDMI and USB‑2 Exposure: Automatic / Manual White balance: Automatic / Manual / ROI Compatibility: Windows 10, 11, Mac OS Included: 30 mm and 30.5 mm microscope adapters Included: 12V71A power adapter, HDMI cable, USB mouse Included: 16GB SD card, Wi‑Fi dongle, USB‑2 plug‑to‑plug cable Included: 76×24 mm calibration slide (1 mm/100), 11.6‑inch screen, instruction manual FAQ What image resolution does the camera record? The camera records at 3840×2160 in capture mode, leveraging the Sony 4K sensor for UHD‑4K detail suitable for inspection and documentation. Can the camera be used with a stereo microscope? Yes, the package includes 30 mm and 30.5 mm adapters for mounting to most stereo microscopes and the camera’s C‑mount interface supports standard optical attachment. Which outputs are available for live viewing or capture? Live monitoring and capture are possible via the built‑in 11.6‑inch screen, HDMI and USB‑2 digital outputs; the included HDMI cable and USB connections facilitate immediate integration. Is the camera suitable for low‑light inspection tasks? With a sensitivity of 505 mV/lux‑sec and adjustable exposure modes, the camera provides improved low‑light performance for many inspection scenarios. Does the system include calibration tools for measurement tasks? Yes, the delivery contains a 76×24 mm calibration slide (1 mm/100) to support straightforward calibration of the imaging chain for measurement documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Pair of Microscope Stage Plates Black/White, Ø 90mm - Euromex
Take advantage of the simple contrast control and standard sizing of these stage plates to improve specimen visibility and routine workflow; the pair of black/white plates and their Ø 90 mm diameter provide flexible backgrounds for a range of samples. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Pair of stage plates (black/white), Ø 90 mm by Euromex — microscope stage plates for stereo microscopes The Pair of stage plates (black/white), Ø 90 mm is designed as a practical contrast solution for stereo microscopes, offering immediate background selection for opaque or translucent specimens. Black and white contrast plates Ø 90 mm for standard stages Pair for quick background switching Improved contrast for reliable inspection results The pair of stage plates delivers a straightforward way to control background contrast during routine inspection. The black surface helps to emphasise light-coloured, translucent samples, while the white side provides a neutral background for darker specimens. This contrast selection reduces the time spent adjusting illumination and visual filters, thereby increasing throughput in inspection tasks. The plates’ role is purely optical, so they complement existing illumination setups without altering microscope calibration. Simple compatibility with standard stereo microscope stages With a defined diameter of Ø 90 mm, these plates are intended for microscopes and stages that accept 90 mm inserts. The standard sizing simplifies integration into common stereo microscope workflows and ensures a snug fit in compatible stage openings. Because the product is a pair, it allows rapid switching between backgrounds during sample preparation or comparison tasks, supporting efficient step-by-step processes in laboratory or workshop environments. Practical guidance and procurement support For users uncertain about fit or suitability, the plates are a low-complexity accessory that typically requires no modification to the stage; they serve as an immediate contrast option for both novice and experienced operators. When additional technical details or compatibility checks are needed, Metav Werkzeuge provides assistance and can confirm whether the Euromex set matches specific stage systems. For further questions, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice. For reliable contrast solutions from Euromex, contact Metav Werkzeuge for expert advice and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9956 SKU: NZ.9956 Manufacturer: Euromex Product type: Microscope stage plates Facts Diameter: 90 mm Special features Pair of plates in black and white For stereo microscopes / stage inserts Provides background contrast for opaque and translucent specimens FAQ Are these plates suitable for stereo microscopes? The Euromex pair of stage plates is intended for use with stereo microscopes and fits stage openings compatible with a 90 mm diameter insert. How does the black/white pair improve inspection? Using the black and white sides of the plates enhances specimen contrast; the black side highlights light or translucent samples while the white side offers a neutral background for darker subjects when using the Euromex stage plates. Is any modification required to fit the plates? No modification is typically necessary; the Euromex plates are designed as stage inserts for stages accepting Ø 90 mm plates. Who to contact for confirmation of compatibility? For compatibility checks and procurement, Metav Werkzeuge provides technical advice and order support for the Euromex NZ.9956 stage plates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Polarising LED Ring Light 16 Power LEDs 44,000 lx @100mm 6500–7500K IP20 - Euromex
Benefit from polarising illumination, high luminous intensity and flexible mounting to improve contrast and repeatability in inspection tasks; order support and delivery are available via Metav Werkzeuge for fast integration advice. Polarisierendes LED‑Ringlicht LE.1975 — Polarising LED ring light with 16 Power‑LEDs by Euromex The Polarisierendes LED‑Ringlicht LE.1975 is a polarising ring light designed to deliver uniform, high‑contrast illumination for microscopy and visual inspection over a working distance of 40–120 mm Polarising illumination for reduced glare 16 Power‑LEDs for consistent brightness 44,000 lx at 100 mm for high contrast Mounting diameter 25–61 mm for flexible fitting Enhanced contrast for precise inspection results The polarising design of this ring light provides reduced specular reflection, which translates into clearer images and more reliable visual evaluation of surfaces, coatings and small features. With 44,000 lx at 100 mm, the light unit produces measurable illuminance that supports objective inspection criteria and speeds up visual tasks. For quality control and microscopy applications, the polarising function helps to reveal surface structures that unpolarised lamps can mask, enabling more accurate assessments and fewer reworks. Versatile mounting and adjustable working distance for workflow flexibility A broad mounting diameter of 25–61 mm and a working distance of 40–120 mm allow straightforward integration with a wide range of stereo microscopes, inspection stands and camera objectives. The flexible fitting reduces retrofit time and minimises the need for additional adapters; the nominal outer diameter of 90 mm keeps the light compact while providing full coverage of common objective fields. These mechanical values support quick setup changes and predictable lighting geometry in production or laboratory environments. Consistent colour and dependable power options for repeatable imaging Colour temperature between 6500–7500 K ensures a cool, daylight‑balanced output that aids colour fidelity in imaging and visual inspection. The unit is powered via 100–240 V AC or 12 V DC, offering compatibility with laboratory mains and common inspection‑system supplies. The array of 16 Power‑LEDs delivers even distribution of light across the field, reducing shadowing and improving image processing results. For photo documentation or automated camera systems, this stability in output helps to maintain consistent measurement conditions. For technical consultation or delivery arrangements contact Metav Werkzeuge for assistance with system compatibility, integration advice and prompt dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: LE.1975 SKU: LE.1975 Manufacturer: Euromex Product type: Polarising LED ring light Key specifications Working distance: 40–120 mm Outer diameter: 90 mm Illuminance: 44,000 lx at 100 mm Light source: 16 Power‑LEDs Colour temperature: 6500–7500 K Mounting diameter: 25–61 mm Power supply: 100–240 V AC; 12 V DC Features & compatibility Polarising LED ring light Polarisation: yes Category: Microscopy accessories › Illumination › Ring lights Brand: Euromex FAQ What advantage does polarisation offer for surface inspection? Polarisation reduces glare and suppresses unwanted reflections so that the Polarisierendes LED‑Ringlicht LE.1975 reveals fine surface detail and texture more reliably than non‑polarised lighting. Which microscopes and objectives can it be mounted on? The mounting diameter of 25–61 mm makes the LE.1975 compatible with a wide range of stereo microscopes and inspection heads; adapters are rarely required thanks to the flexible fitting range. How bright is the light in typical use? At a working distance of 100 mm the ring light produces 44,000 lx, providing strong, uniform illumination suitable for documentation and visual measurement tasks. Is the colour temperature suitable for imaging and documentation? Yes. The 6500–7500 K range offers a daylight‑balanced output that supports consistent colour rendition for photography and automated image analysis. What power options are available for integration into inspection systems? The unit accepts 100–240 V AC and 12 V DC, enabling connection to standard laboratory mains or low‑voltage inspection equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
91 mm Digital Microscope EduBlue LCD ED.3000 5 MP, 2592 x 1944 Pixels, 9 Inch Display, 21/7 LED Illumination - Euromex
Benefit from the combination of 5 MP imaging, a 9-inch display and precision LED illumination for reliable, repeatable inspections; order through Metav Werkzeuge or request detailed consultation on integration into the workshop workflow. EduBlue LCD ED.3000 — Euromex digital microscope with 5 MP sensor and 9-inch display The EduBlue LCD ED.3000 is a digital microscope designed for macro inspection, documentation and teaching applications in laboratories and workshops 5 MP sensor for crisp detail 9-inch LCD with 8–54x magnification 60 fps for smooth live observation Integrated microSD with 16 GB card included High-resolution imaging that supports clear decisions The EduBlue LCD ED.3000 combines a 5 MP sensor with a maximum pixel resolution of 2592 x 1944, delivering images that reveal fine structure and surface detail. The CMOS sensor ensures low-noise capture and good dynamic range for contrasts commonly encountered in inspection tasks. High pixel resolution aids traceability and reporting: captured images are immediately suitable for measurement overlays, defect documentation and digital archiving, reducing rework and increasing throughput in quality-control routines. Smooth live observation for faster inspection cycles A maximum frame rate of 60 fps together with the 9-inch display provides fluid live imaging that helps operators detect motion or subtle changes without stutter. The optical magnification range of 8–54x, extended by a digital zoom up to 540x, allows quick switching between overview and detailed views without changing hardware. For production environments this means faster setup and fewer interruptions: components can be assessed in real time, and the smooth preview supports accurate positioning and quicker go/no-go decisions. Lighting and working distance designed for practical handling The inspection head offers both reflected and transmitted lighting: 21 LEDs for reflected light at 5500 K and 7 LEDs for transmitted light at 5785 K, enabling consistent colour rendering across a variety of specimens. Reflected illumination suits opaque parts and surface inspection, while transmitted lighting is ideal for thin or translucent samples. A 91 mm working distance provides comfortable clearance for probes, tweezers or measurement fixtures, so manipulation and measurement can proceed without compromises to ergonomics or visibility. Built for workshop use, data capture and portability Storage and power come ready to hand: the system accepts microSD cards and is supplied with a 16 GB card, while the external power unit is 12 V, 2 A, simplifying integration with standard workshop power arrangements. With a compact footprint (425/475 x 180 x 230 mm) and a weight of 2.3 kg, the unit is portable enough for bench-to-bench use yet stable for repeatable imaging. Integrated capture and storage cut the steps between inspection and reporting, enabling swift data transfer and traceable inspection records for audit and quality documentation. For tailored advice on integrating the Euromex EduBlue LCD ED.3000 into measurement workflows or to secure supply via Metav Werkzeuge, contact Metav Werkzeuge for personalised technical support and reliable delivery from Emmerich. Technical Data Article number: ED.3000 Manufacturer: Euromex Product type: Digital microscope Model series: EduBlue LCD SKU: ED.3000 Dimensions: 425/475 x 180 x 230 mm (H x B x T) Weight: 2.3 kg Core specifications Camera resolution: 5 MP Pixel resolution: 2592 x 1944 Sensor: CMOS Frame rate: max. 60 fps Working distance: 91 mm Display: 9 inch Optical magnification: 8–54x Digital zoom: up to 540x Storage interface: microSD Included memory: 16 GB Power supply: 12 V, 2 A Features and accessories Illumination reflected: 21 LEDs, 5500 K Illumination transmitted: 7 LEDs, 5785 K Digital imaging: true Included accessories: 16-GB memory card; power supply 12 V, 2 A Gallery image available FAQ What image quality can be expected for documentation? The EduBlue LCD ED.3000 delivers 5 MP stills at 2592 x 1944 pixels, providing sufficient detail for documentation, measurement overlays and defect recording in quality-control workflows. Is the live view smooth enough for positioning or motion inspection? Yes, the device supports up to 60 fps, which ensures fluid live imaging on the 9-inch screen for precise positioning and dynamic inspection tasks. Can thin or translucent samples be examined with this system? Transmitted illumination (7 LEDs at 5785 K) is provided for translucent specimens, while the 21 reflected LEDs at 5500 K handle opaque surfaces, allowing both inspection modes without additional lights. How is data stored and transferred from the unit? The system accepts microSD cards and is supplied with a 16 GB card for immediate image capture; files can be transferred from the card to standard IT systems for archiving and reporting. What workspace considerations should be made for mounting and sample access? With a working distance of 91 mm and compact dimensions, the unit affords comfortable access for probes and tools while remaining small enough for standard benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Abbe Condenser 1.25 NA With Darkfield And Phase Contrast Slot, bScope BS.9102 - Euromex
Benefit from a combination of precise Abbe illumination, flexible contrast options and straightforward integration into existing systems for dependable microscopy results; order the condenser directly via Metav Werkzeuge or consult our advisors for technical matching. bScope BS.9102 condenser — Abbe 1.25 NA with darkfield & phase slot (Euromex) The bScope BS.9102 condenser is an Abbe-style condenser designed to deliver high-contrast transmitted-light illumination with a 1.25 numerical aperture, featuring a dedicated slot for darkfield and phase contrast sliders. Abbe condenser with 1.25 numerical aperture Slot for darkfield and phase contrast sliders Compatible with bScope series microscopes Precision optical alignment for consistent contrast Optimised illumination for improved detail and contrast The Abbe condenser specification with 1.25 NA provides a solid basis for precise transmitted-light microscopy: a higher numerical aperture enables improved light-gathering and contributes to enhanced resolution and image contrast when paired with suitable objectives. For routine laboratory work and educational settings, the optical design supports repeatable results and clearer differentiation of specimen structures, reducing time spent on illumination adjustment and increasing throughput at the bench. Flexible contrast techniques for a wider range of samples Built with a slot for darkfield and phase contrast sliders, this condenser permits rapid switching between contrast methods without complex reconfiguration. Darkfield illumination is suited to the visualisation of small, unstained particles, while phase contrast emphasises transparent cellular structures. The slider arrangement keeps accessories accessible and changeable on the fly, so different sample types can be examined efficiently without compromising alignment or focus. Robust compatibility and precise alignment for system integration Engineered for integration with the bScope series, the condenser offers reliable compatibility and straightforward mechanical fitting to standard transmitted-light microscopes of the same line. The optical path is configured for consistent optical alignment, which helps maintain uniform illumination across sessions and users. The compact design is suitable for teaching labs, routine inspection benches and light microscopy workflows where stable, repeatable illumination is required. Practical support and further technical resources Technical documentation identifies the unit as an Abbe condenser with a 1.25 NA and slider accommodation for contrast accessories; additional information is available on request for exact mounting and compatibility with specific objectives or illumination setups. For supplementary technical data or guidance on matching the condenser to objectives and methods, Metav Werkzeuge provides direct support and can supply clarifications or copies of the referenced education materials. For a reliable Abbe illumination solution choose the Euromex bScope BS.9102 condenser — contact Metav Werkzeuge in Emmerich for ordering advice or technical matching at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BS.9102 SKU: BS.9102 Model series: bScope Product type: Condenser Manufacturer: Euromex Key numerical data Numerical aperture: 1.25 NA Special features Abbe condenser design Slot for darkfield and phase contrast sliders Compatible with bScope series microscopes Source: Education PDF S.21; Life Science PDF S.9,39 FAQ What numerical aperture does the condenser provide? The Euromex bScope BS.9102 condenser provides an NA of 1.25 NA, which supports higher-resolution transmitted-light imaging and improved contrast with compatible objectives. Can this condenser be used for darkfield and phase contrast techniques? Yes, the condenser includes a dedicated slot for darkfield and phase contrast sliders, allowing rapid switching between these contrast methods. Which microscopes is the condenser compatible with? The condenser is designed for the bScope series and offers mechanical and optical compatibility with microscopes from that range; verify objective and mount compatibility for specific models. How does the Abbe design affect image quality? An Abbe condenser concentrates and directs light to optimise specimen illumination; with the 1.25 NA, it helps to achieve uniform, high-contrast transmitted-light images when matched to appropriate objectives. Where can further technical documentation be obtained? Further documentation and references cited for the condenser are available; consult the education and life science PDFs mentioned in the technical data or request details from Metav Werkzeuge. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Achios-X Observer AX.9100 Condenser Standard Abbe - Euromex
Take advantage of the Standard Abbe condenser design and precise optical alignment for consistent illumination, combined with straightforward integration into Achios‑X Observer stands. The result is dependable image quality for routine microscopy; order the condenser directly via Metav Werkzeuge or ask our consultants if needed. Euromex Achios‑X Observer AX.9100 condenser — Standard Abbe condenser for routine microscopy Euromex Achios‑X Observer AX.9100 condenser is a compact standard Abbe condenser engineered for reliable illumination control and compatibility with the Achios‑X Observer series, offering a pragmatic upgrade to existing optical setups. Standard Abbe condenser design Fits Achios‑X Observer series Robust build for routine microscopy Simple integration into optical path Consistent illumination for reliable results The Abbe condenser concept used in this unit provides a well-established approach to concentrate light at the specimen plane, improving contrast and resolution for transmitted‑light techniques. Because the design focuses on controlled illumination rather than complex optics, the condenser delivers reproducible light distribution across routine samples. This makes it particularly suitable for microscopy tasks where dependable, repeatable lighting is more valuable than variable speciality functions. Easy installation and optical alignment Designed to match the Achios‑X Observer family, the condenser allows straightforward mechanical and optical integration into an existing stand. The simple mounting reduces downtime and simplifies optical alignment, so the unit can be brought into service quickly. For workshops and teaching labs that require minimal configuration effort, the practical design translates into faster setup and fewer interruptions to workflow. Practical choice for labs and educational use For laboratories, schools and small analytical facilities seeking a reliable illumination component, this condenser balances precision with pragmatic operation. The unit supports standard transmitted‑light workflows and complements basic to intermediate microscopy tasks without introducing unnecessary complexity. It is a compact, effective optical accessory that focuses on core performance where dependable light control is required. For a pragmatic optical upgrade, choose the Euromex Achios‑X Observer AX.9100 condenser and contact Metav Werkzeuge in Emmerich for technical guidance and swift supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AX.9100 Manufacturer: Euromex Model series: Achios‑X Observer Product type: condenser SKU: AX.9100 Facts No numerical specifications provided Special features Standard Abbe condenser Category: Microscopy accessories · Others · Condensers Label: Condenser Achios‑X Observer AX.9100 FAQ What optical principle does this condenser use? The unit is a Standard Abbe condenser, providing concentrated transmitted light to improve contrast and support routine imaging tasks with the Euromex Achios‑X Observer AX.9100 condenser. Is the condenser compatible with the Achios‑X Observer stands? Yes, compatibility with the Achios‑X Observer series is indicated by the model series designation, allowing straightforward integration into matching Euromex observation stands. Can this condenser be used for teaching and routine lab work? The condenser is designed for routine microscopy and educational environments, offering robust performance and simple alignment that fit classroom and workshop requirements. How does the condenser affect image quality? By concentrating illumination and enabling consistent light distribution, the condenser enhances specimen contrast and supports clearer transmitted‑light observation with everyday samples. Is there any numerical specification available for optical aperture or dimensions? No numerical specifications were provided for aperture or physical dimensions in the available data for the AX.9100 unit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
AE.5158-P 100 x 65mm Polarization Kit with Rotatable Stage and 360° Polarizer, Microscope Accessory - Euromex
Take advantage of precise polarisation control and a compact rotatable stage to improve contrast and repeatability in routine microscopy work; the set’s analyser slider, rotatable stage and lamphouse polariser combine to simplify polarisation studies. Order the kit directly via Metav Werkzeuge or consult the Metav team for application guidance. Microscope Polarisation Kit AE.5158-P — analyser slider, rotatable 100 x 65 mm stage (Euromex) The Microscope Polarisation Kit AE.5158-P is a polarisation accessory for transmitted-light microscopes, designed to add controlled polarisation contrast for educational and routine laboratory applications Analyser in slider for quick insertion Rotatable stage 100 x 65 mm for sample orientation Two clamps for secure specimen holding 360° rotatable polarisation filter for lamphouse Enhance contrast with controlled polarisation The kit provides an analyser in a slider and a 360° rotatable polarisation filter for mounting on the lamphouse, enabling straightforward polarisation contrast without complex optical adjustments. By introducing crossed polarisation and a rotatable polariser, birefringent structures become visible and characterisable; this facilitates clearer identification of crystalline phases, stress patterns and anisotropic materials. The modular design means polarisation can be added or removed quickly, reducing downtime between brightfield and polarised observations. Stable rotation and secure sample handling for reproducible results A compact rotatable stage (100 x 65 mm) with two clamps is included for precise sample alignment and repeatable rotation. The small stage footprint is suitable for standard plain stages and supports consistent angular positioning when examining thin sections, fibres or microstructures. Secure clamping minimises sample drift during rotation, which improves measurement reproducibility and reduces the need for repositioning, saving time in both teaching demonstrations and routine analyses. Seamless integration for teaching and routine laboratory use The components are configured for mounting on a plain stage and the lamphouse, permitting simple retrofitting to many transmitted-light microscopes. The kit suits classroom demonstrations, practical exercises and routine polarisation checks where ease of use and reliability are essential. With simple mechanical attachments rather than complex optical replacements, the set reduces installation effort while delivering the visual benefits of polarisation for material inspection and educational purposes. Contact Metav Werkzeuge for procurement or technical advice on integrating this polarisation kit into existing microscopes and for recommendations tailored to specific applications Technical Data Article number: AE.5158-P SKU: AE.5158-P Product type: Microscope Polarisation Kit Manufacturer: Euromex Facts Rotatable stage size: 100 x 65 mm Polariser rotation: 360° Includes: analyser in slider, 2 clamps Special features Mounting: to plain stage and lamphouse Components: small rotatable stage with clamps Application: polarisation contrast for transmitted-light microscopy Source: Education PDF S. 13,14 FAQ What does the kit include and how is it mounted? The kit includes an analyser in a slider, a small rotatable stage (100 x 65 mm) with two clamps and a 360° rotatable polarisation filter for the lamphouse; the stage mounts on a plain stage and the polariser attaches to the lamphouse. Is the polarisation kit compatible with teaching microscopes? Yes; the AE.5158-P is designed for straightforward retrofit to many transmitted-light microscopes commonly used in teaching and routine laboratories, thanks to its plain-stage mounting and lamphouse polariser. Can the rotatable stage support repeated angular measurements? The rotatable stage and clamps provide stable sample holding and consistent rotation, supporting reproducible angular positioning for comparative observations and demonstrations. Which sample types benefit most from this polarisation set? Anisotropic or birefringent materials such as crystals, fibres, thin sections and stressed polymers show enhanced contrast with the polarisation kit, facilitating characterisation and teaching of optical properties. How does the analyser slider simplify workflow? The analyser in slider format permits rapid insertion and removal of the analyser element, enabling quick switching between brightfield and polarised observations without major optical reconfiguration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com