Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Take advantage of the combination of 12x magnification, lightweight aluminium construction and an anti-fog vent for fast, reliable inspection of delicate parts; order the loupe directly via Metav Werkzeuge or ask our consultants if further guidance is required. Peak 12x loupe (A48D) — aluminium housing with anti-fog vent Peak 12x loupe (A48D) is a compact inspection loupe designed for close visual work on small components such as watches, jewellery and precision parts 12x magnification for fine detail Lightweight aluminium housing Vent prevents lens fogging Ideal for watches and jewellery Faster, more accurate visual inspection of fine parts Equipped with 12x magnification and a single lens, this inspection loupe delivers clear enlargement for quality control and assembly inspection. The magnification helps to detect hairline defects, burrs and surface irregularities that are difficult to see with the naked eye, reducing rework and inspection time. Where a numeric value is required for comparison with measuring tools, pairing the loupe with a precision caliper supports consistent dimensional verification. The optical arrangement is explained in plain terms so that operators unfamiliar with lens technology understand that a single, well-corrected element provides a sharp central image ideal for detailed scrutiny. Robust, lightweight design for everyday workshop use The housing is manufactured from aluminium, offering a favourable strength-to-weight ratio that keeps handheld use comfortable during extended tasks. The compact form factor is built to withstand routine workshop handling while remaining easy to carry between benches or to a worksite. Corrosion-resistant material and a solid finish ensure long service life under normal industrial conditions, which contributes to predictable maintenance cycles and lower total cost of ownership. Ergonomic handling reduces fatigue during repetitive inspection routines, improving operator efficiency and throughput. Consistent clarity in changing environments A small bore in the tube provides an anti-fog vent, preventing condensation from forming on the lens when moving between temperature zones or when an operator’s breath would otherwise mist the optics. This practical detail preserves image clarity and minimises interruptions during inspection, a direct advantage when tight schedules leave little room for delays. The vent also reduces the need for frequent cleaning, supporting uninterrupted workflow and reliable results even in humid conditions. Basic cleaning instructions for optical surfaces prolong performance and protect the lens coating. Practical applications and benefits for quality workflows Designed for fine work on watches and jewellery, the loupe also suits electronics assembly, component sorting and other precision tasks where visual detail is critical. The combination of compactness, lightweight build and reliable optics speeds up inspection, helps avoid costly production errors and supports artisan craftsmanship. For workshops that already rely on measurement tools, the loupe complements dimensional checks and visual inspection steps, creating a tighter quality loop between measurement and assessment. With its straightforward features, this inspection loupe integrates smoothly into established processes and contributes to more consistent inspection outcomes. Arrange technical advice with Metav Werkzeuge for this Peak 12x loupe (A48D) and secure prompt delivery from our Emmerich hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.299 Type: A48D Category: Optics Facts Magnification: 12x Lens count: 1 Material: Aluminium Special features Small bore in tube prevents lens fogging Suitable for fine work on watches and jewellery FAQ What magnification does this loupe offer? The Peak 12x loupe (A48D) provides 12x magnification, suitable for detailed inspection of small components. Is the lens a single element or multi-element design? The loupe uses a single lens configuration that gives a sharp central image for fine visual inspection. Will the loupe fog up during temperature changes? A small vent in the tube prevents fogging, so the loupe maintains clarity when moving between different temperature or humidity conditions. Can this loupe be used together with a precision caliper? Yes, the loupe complements dimensional checks and pairs well with a precision caliper for combined visual and measurement inspection. Which workshop tasks is the loupe best suited to? Ideal applications include inspection of watches and jewellery, electronics assembly and any task where enhanced visual detail improves quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Stable base, integrated top and bottom LED illumination and a Ø25×240 mm column ensure reproducible positioning and clear sample contrast for inspection tasks. Benefit from a 50 mm focus travel and 140 mm reach to accommodate varied specimens. Order the stand directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Stand SD2‑D (M503.232) — microscope stand with LED incident and transmitted illumination by Metav IndustryLine The Stand SD2‑D (M503.232) is a robust stand for stereo microscopes that combines stable support with integrated LED incident and transmitted lighting for routine inspection and assembly work. Stable heavy base 283×292 mm Integrated LED incident and transmitted light Ø25×240 mm column with 140 mm reach Precise 50 mm focus travel Built for dependable, reproducible inspection results The stand is engineered to provide a stable support platform: the large 283×292 mm base reduces vibrations and movement during handling, making measurements and imaging more repeatable. The column design — Ø25×240 mm — coupled with a 140 mm lateral reach delivers consistent positioning across different sample sizes. These mechanical choices translate into faster quality checks and fewer reworks, increasing throughput in production and inspection workflows while maintaining accurate specimen orientation and image reproducibility. Integrated illumination that improves defect detection and throughput Equipped with both incident and transmitted LED illumination, the stand supports contrast enhancement for opaque and transparent parts alike. The lighting consumes 3 W and is optimised for even, flicker‑free output, so visual inspection and image acquisition benefit from stable illumination conditions. For transparent samples the transmitted light emphasises internal features, while the top light reveals surface texture; together they reduce the need for frequent repositioning and speed up routine visual checks and photographic documentation. Precise mechanical control for ergonomic handling The stand provides a 50 mm focus travel that enables fine adjustment without changing the instrument or the sample mount. A generous 95 mm work surface gives room for fixturing small assemblies or circuit boards, and the 76 mm mounting bore accepts common stereo microscope mounts, simplifying instrument installation. The overall geometry supports one‑hand operation for coarse adjustments and controlled fine focusing, improving operator comfort during extended inspection sessions and reducing handling errors. Practical applications and workshop advantages This stand is well suited for electronics inspection, precision assembly, watchmaking, and quality control in production environments where visual clarity and stable positioning matter. The combination of a wide base, integrated LED lighting and a tall column makes the unit a versatile platform for both manual inspection and imaging set‑ups. Backed by Metav’s approach to democratising precision, the product forms part of a broader supply chain that emphasises availability and consistent quality for workshops and small manufacturers. For application advice and to arrange the supply of the SD2‑D stand (M503.232) from Metav IndustryLine, contact Metav Werkzeuge for tailored consultation and delivery guidance Technical Data Article number: M503.232 GTIN: 4054469145037 Type: SD2‑D Brand: Metav IndustryLine Customs tariff number: 90119000 Facts Base size: 283×292 mm Work surface diameter: 95 mm Mounting diameter: 76 mm Column: Ø25×240 mm Reach (lateral): 140 mm Focus travel: 50 mm Illumination power: 3 W Light type: LED Focus area: 50 Special features Integrated incident and transmitted LED illumination Designed for stereo microscopes Stable heavy base for low vibration Suitable for inspection, assembly and quality control ECLASS: 32130102 FAQ What types of samples benefit from the integrated illumination? The integrated incident and transmitted LED lighting on the Stand SD2‑D (Metav IndustryLine, M503.232) supports both opaque parts and transparent specimens, making it suitable for surface inspection and internal feature visualisation. Which stereo microscopes fit this stand? Microscopes with a compatible 76 mm mounting interface can be mounted on the SD2‑D (M503.232); the bore and mounting geometry are intended for common stereo microscope standards. How does the stand improve measurement reproducibility? The wide 283×292 mm base and rigid Ø25×240 mm column provide a stable platform that reduces movement during handling, ensuring more reproducible inspection and imaging outcomes with the SD2‑D. Is the focus travel sufficient for assembly and inspection tasks? Yes. The 50 mm focus travel allows precise vertical adjustment for a range of component sizes, reducing the need to reposition samples during detailed inspections. Can the stand be used for photographic documentation? The stable base, consistent LED illumination and adjustable reach of the SD2‑D (M503.232) make it well suited for photographic documentation in quality control and laboratory settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Secure, portable workshop illumination that combines a 15 kg magnetic hold with an adjustable focal length for task-focused lighting; lightweight and battery‑powered for flexible positioning. Order the LED light directly via Metav Werkzeuge or consult our specialists for bespoke advice. LED light with permanent magnet, adjustable focal length 15 kg — Metav IndustryLine task lamp LED light with permanent magnet, adjustable focal length 15 kg is a compact, battery‑operated work lamp designed for secure attachment and precise illumination in workshops and inspection stations. Round permanent magnet base Ø50 mm Adjustable tilt and focal length Secure hold with 15 kg magnetic force Battery-operated for mobile use Concentrated illumination that improves task efficiency The magnetic work lamp delivers crisp, directed light so operators can concentrate on fine operations without relocating heavy fixtures. With a permanent magnet base and an adjustable focal length, the lamp reduces setup time and improves repeatability when inspecting components or aligning tools. The lamp’s compact form and 15 kg holding force allow it to remain reliably fixed to steel surfaces while the beam is focused where it is needed most, cutting the time spent re‑positioning and reducing potential rework. Portable design for flexible workshop and inspection use Built for mobility, this battery‑operated lamp runs on 3x Micro‑AAA cells (not included), giving freedom to move between machines, benches and inspection jigs without trailing cables. The device’s low mass (0.45 kg) and 250 mm overall height make it comfortable to handle and quick to position. The adjustable tilt keeps the light oriented on critical areas, while the focused beam helps to reveal surface defects, burrs or fine features that ambient lighting can miss. Robust attachment and safe handling for industrial environments The round magnetic base (Ø50 x 10 mm) combined with 15 kg magnetic force ensures a secure hold even on slightly curved or uneven ferrous surfaces. The lamp’s mechanism permits controlled tilt and focus adjustments, so the light can be locked into place once aligned; this stability supports consistent inspection results and reduces measurement variability. The housing and mounting geometry are tuned for frequent workshop use, delivering a dependable tool for assembly, maintenance and optical inspection tasks. Choose the Metav IndustryLine magnetic LED lamp M208.116 for dependable, focused illumination in the workshop — contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored guidance and fast dispatch. Technical Data SKU: M208.116 GTIN: 4054469151571 Label: LED light with permanent magnet, adjustable focal length 15 kg, without batteries Category: Optik ETIM: EC001959 Facts Magnet force: 15 kg Total height: 250 mm Weight: 0.45 kg Base: Ø50 x 10 mm Batteries: 3x Micro‑AAA (not included) Special features Permanent magnet base, round Tilt angle adjustable Adjustable focal length Battery‑operated portable lamp Supplied without batteries FAQ How strong is the magnetic attachment? The magnetic base provides a holding force of 15 kg, enabling secure fixation to suitable ferrous surfaces for stable illumination. Does the lamp require batteries and which type? This lamp runs on 3x Micro‑AAA cells (not included); battery operation makes the unit portable and quick to deploy. Can the beam be focused and angled? Yes, the tilt angle and focal length are both adjustable to concentrate light precisely where required for inspection or assembly tasks. Is the lamp suitable for machine‑side mounting? The round permanent magnet and compact base (Ø50 x 10 mm) make it well suited for temporary mounting on machine tables, fixtures and housings for close‑up work. Which product designation should be quoted when ordering? Please refer to the Metav IndustryLine LED light with permanent magnet, adjustable focal length 15 kg (SKU M208.116) for ordering and enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact design and chromatic correction for reliable, colour-accurate inspections; the combination of 10x magnification and a focused Ø15.5 viewing area supports precise visual checks. Order the Peak folding loupe directly via Metav Werkzeuge or consult the team for application advice. Peak folding loupe — 10x folding loupe with chromatic correction Peak folding loupe for close visual inspection and quality control in optics, electronics and jewellery work. Folding design for compact storage 10x magnification for fine detail Chromatic correction lens for true colour Ø15.5 mm field of view for precise checks Optical accuracy that supports exact inspection The loupe pairs 10x magnification with a lens featuring chromatic correction, which reduces colour fringing at high magnification and delivers a clearer image with true colour rendition. This correction is especially valuable when distinguishing subtle colour differences or inspecting fine print and solder joints, because lateral chromatic aberration is minimised. The optical specification therefore supports faster, more reliable visual judgements in inspection workflows. Portable design for everyday workshop use A folding mechanism protects the optics when not in use and makes the loupe easy to store in a pocket or toolbox. The compact external dimensions (39x24x22) mean the instrument occupies little space without compromising viewing performance. The retractable housing reduces the risk of lens damage during transport and ensures consistent readiness for routine checks, whether on the bench or on-site. Focused field of view for targeted quality control With a Ø15.5 viewing area, the loupe concentrates the operator’s attention on a precise section of the component under inspection. This focused field supports tasks that demand accurate visual assessment, such as examining solder joints, inspecting gemstone facets, or verifying small mechanical parts. The concentrated view reduces fatigue and speeds up repetitive checks, leading to more consistent quality control results. Practical handling, minimal upkeep The design emphasises straightforward handling and low maintenance. The folding action secures the lens against contaminants and simplifies cleaning routines; any routine wipe with a microfibre cloth restores clarity quickly. The Peak instrument is engineered for long-term usability, offering dependable performance as a handheld inspection tool across light-industry and hobbyist applications. Technical queries regarding suitability can be referred to Metav’s advisors for precise guidance. For tailored advice on integrating the Peak folding loupe into inspection procedures or to enquire about availability, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — the Metav team will assist with compatibility and procurement details Technical data Article number: MS905.202 Name: Peak folding loupe Variant: rund, 10x Manufacturer: Peak Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/fe/10/d0/67/67d010fe2285a7cc9c2fed1f/MS905200-main.jpg Facts Magnification: 10x Field of view: Ø15.5 Dimensions: 39x24x22 Special features Lens: mit chromatischer Korrektur Shape: rund Category: Optik FAQ What magnification does the loupe provide? The Peak folding loupe provides 10x magnification, suitable for detailed visual inspections of small components. How large is the usable viewing area? The loupe offers a focused viewing area of Ø15.5, designed to target specific regions for precise checks. Is the lens treated to reduce colour errors? Yes — the lens of the Peak folding loupe includes chromatic correction, which reduces colour fringing and improves colour fidelity at higher magnification. How is the loupe stored when not in use? A folding housing protects the optics; the compact dimensions (39x24x22) allow safe storage in a pocket or toolbox. Which tasks is this loupe suitable for? The instrument is appropriate for inspection tasks such as jewellery appraisal, electronics assembly checks, watchmaking and other fine-detail visual work where 10x magnification and accurate colour rendition are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust opal glass support that provides steady positioning and reduced glare together with direct compatibility with the Peak magnifier MS905.290. Order the base directly via Metav Werkzeuge or request specialist advice from our consultants for a seamless integration into the inspection station. MS905.291 Base for magnifier by Peak — opal glass support MS905.291 is a compact support base made from opal glass, designed to hold the Peak magnifier MS905.290 securely and to improve visual clarity during inspection tasks Opal glass construction for diffuse light Compatible with Peak magnifier MS905.290 Compact, stable support design Improved inspection clarity through diffuse illumination The opal glass construction provides a diffuse light effect that helps to reduce direct reflections and harsh glare on inspected surfaces. This optical characteristic is particularly useful when examining reflective or textured parts, because the softened illumination improves contrast without altering the object. The support’s material choice therefore contributes directly to more reliable visual assessments and fewer repeated inspections, making the process more efficient for workshop and laboratory routines. Stable positioning for consistent measurements Designed as a support base, the component offers stable support for hand-held and mounted magnifiers alike, minimising unintended motion during close inspection. Stable positioning reduces measurement variability and the risk of fatigue when carrying out repetitive checks. For quality control departments and repair benches, consistent alignment of the magnifier means quicker acceptance decisions and a smoother workflow, while preserving the integrity of delicate samples. Seamless compatibility with existing Peak optics The base is specified for use with the Peak magnifier MS905.290, ensuring straightforward integration into established inspection set-ups. Compatibility eliminates the need for adapters or modifications, simplifying procurement and installation. Where a compact footprint and neat visual integration are priorities, the support’s opal glass finish also lends a discreet, professional appearance to the inspection bench, combining practicality with an organised workspace aesthetic. Contact Metav Werkzeuge for tailored purchasing advice or a quotation and speak directly with our consultants at +49 2822 7131930 or info@metav-werkzeuge.com to ensure the base meets the intended application Technical data SKU: MS905.291 Material: Opal glass Compatible with Peak magnifier MS905.290 Category: Optics Brand: Peak Data No numerical specifications available Special features Opal glass construction Support base for magnifier Image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/db/60/c8/67/67c860dba8658cbb791b0ea4/MS905291-main.jpg FAQ Is this base suitable for use with other magnifiers? Compatibility is specified for the Peak magnifier MS905.290; other magnifiers may fit depending on their mounting geometry, but MS905.291 is designed for Peak’s MS905.290 How does opal glass benefit inspection tasks? The opal glass of MS905.291 softens and diffuses light, reducing glare and improving surface contrast for clearer visual inspection Can the support be integrated into an existing inspection station? MS905.291 is intended as a compact support base and can be integrated into existing benches where the Peak magnifier MS905.290 is used, without additional adapters for typical set-ups Where can technical advice or further product details be obtained? Technical advice and further information are available from Metav Werkzeuge; the MS905.291 base can be specified and discussed with their specialists Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of high-sensitivity imaging and flexible digital outputs to speed up inspection cycles while keeping integration and setup straightforward; order the unit directly via Metav Werkzeuge or consult the technical team for configuration advice. VC.3036-HDS HD-Farbkamera (HD-Ultra) – Sony sensor, HDMI & USB‑2 VC.3036-HDS is a compact HD colour inspection camera designed for industrial optics and metrology applications with progressive scan and dual digital outputs Sony sensor, high sensitivity Dual digital outputs: HDMI and USB‑2 Integrated 11.6" HD screen Capture 6 MP; live view 1920×1080 Engineered performance for fast, reliable inspection The imaging chain combines a Sony sensor with Progressive scan capture to deliver crisp, artefact‑free live images and high‑resolution stills. With a 6 MP capture mode (3264×1836) and a 1920×1080 live view, the system reduces the need for repeated captures and rework, increasing throughput in inspection tasks. The listed sensitivity 510 mV/lux‑sec ensures dependable contrast under controlled illumination, which translates into fewer retakes and more consistent measurement results for production control. Flexible connectivity and straightforward integration Equipped with both HDMI and USB‑2 digital outputs and a standard C‑mount interface, the unit integrates with measurement software and external monitors without bespoke adapters. Native compatibility with Windows 10/11 and Mac OS simplifies data acquisition from calipers and other instruments, while the supplied HDMI and USB cables plus a High Speed 16GB SD card reduce initial procurement and commissioning time. These connectivity choices are intended to lower integration effort and shorten the path from delivery to productive use. Designed for workshop and laboratory conditions A purpose‑built chassis with compact dimensions (80×70×90 mm) and an 11.6" HD screen offers local visual feedback directly at the bench. Rated for operation between 0–60°C and 45–85% humidity, and producing just 55 dB during operation, the camera suits both workshop floors and controlled lab environments. Power conversion from 100–240 Vac to 12 Vdc/2 A secures stable imaging even on variable supply lines, while the modest footprint maintains flexibility in tight inspection stations. Practical package that accelerates measurement tasks The delivery includes key accessories to start work immediately: HDMI and USB‑2 cables, a 12 Vdc/2 A power supply, High Speed 16GB SD card, USB mouse, a 0.37× objective and a 1 mm/100 measuring screw, together with the 11.6" monitor. Colour fidelity is supported by 36 bits reproduction and the combination of high capture resolution (3264×1836) with live streaming capability makes the VC.3036‑HDS suitable for documentation and traceable inspection records. The arrangement minimises additional purchases and supports rapid adoption into existing metrology setups. For procurement or tailored configuration from Metav Werkzeuge—leveraging Emmerich stock and technical advice—please request an integration quote or product allocation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VC.3036-HDS Manufacturer: Euromex Model type: HD-Ultra Product designation: HD-Farbkamera with HDMI and USB connection Core specifications Format: 1/2.8" HDTV 1080p Capture resolution: 3264×1836 Live resolution: 1920×1080 Megapixels: 6 MP Sensitivity: 510 mV/lux‑sec Dimensions: 80×70×90 mm Display: 11.6" HD screen Operating temperature: 0–60°C Humidity range: 45–85% Noise level: 55 dB Power: 100–240 Vac → 12 Vdc/2 A Magnification: 0.37× Features & accessories Sensor: Sony Scan type: Progressive scan Lens mount: C‑mount Exposure: Automatic/Manual White balance: Automatic/Manual Data output: Digital HDMI and USB‑2 Colour reproduction: 36 bits Included accessories: HDMI and USB‑2 cables, 12 Vdc/2 A supply, High Speed 16GB SD card, USB mouse, 0.37× objective, measuring screw 1 mm/100, 11.6" screen Compatible with caliper software on Windows 10, 11 and Mac OS FAQ What image resolutions are available for capture and live view? The VC.3036‑HDS captures still images at 3264×1836 and provides a 1920×1080 live view for real‑time inspection. Is the camera suitable for integration with measurement software on different operating systems? Yes, the HD‑Ultra unit supports connection to measurement devices and software on Windows 10/11 and Mac OS via the HDMI and USB‑2 outputs. Which lens mount and magnification are supplied? The unit uses a C‑mount and is supplied with a 0.37× objective, facilitating connection to standard industrial optics. What accessories are included to start immediate operation? Delivery for the VC.3036‑HDS includes HDMI and USB‑2 cables, a 12 Vdc/2 A power supply, a High Speed 16GB SD card, USB mouse, 0.37× lens, measuring screw 1 mm/100 and the 11.6" screen. Can the camera operate reliably on a factory floor with variable conditions? Yes; the HD‑Ultra camera is specified for 0–60°C and 45–85% relative humidity and accepts 100–240 Vac mains input with stable 12 Vdc output, suitable for many production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The compact, battery-powered illumination delivers consistent light for close optical inspection while remaining fully compatible with Peak Zoom loupes; ideal where mobility and quick visual checks are essential. Order the lighting module directly from Metav Werkzeuge or consult their advisors for application guidance. Peak Lighting MS904.028 — compact illumination for precision optical work, battery powered The Peak Lighting MS904.028 is a compact illumination unit developed for close-up inspection tasks and intended for use with optical magnification aids in laboratory, clinic or workshop environments. Battery operation: 2× Type C cells Compatible with Peak Zoom loupes Compact optical lighting for inspection Easy retrofitting to magnification aids Delivering reliable illumination for detailed inspection Bright, consistent light is fundamental when inspecting fine detail under magnification. The MS904.028 offers a battery-powered source of illumination that reduces shadowing and improves contrast during close visual inspection, making surface defects and small features easier to see. By providing stable, task-focused lighting, the unit helps to reduce eye strain during extended checks and supports more reliable visual assessments. Improved visibility directly contributes to fewer missed defects and a more efficient inspection routine. Integration with magnification aids for practical workflows Designed to match the form and function of popular magnification systems, this lighting module is compatible with Peak Zoom loupes, enabling straightforward integration into existing inspection setups. The compact design keeps the optical axis unobstructed and preserves working ergonomics, so operators can maintain a natural posture while examining components. Compatibility with established zoom loupes means minimal adaptation time and predictable results when switching between unaided and magnified inspection. Portable power for flexible use on the go Powered by 2× Type C batteries (not included), the illumination unit avoids tethering to mains power and supports inspections in locations without convenient outlets. Battery operation delivers flexibility for quick checks on the production line, at customers’ premises or during field service calls. The straightforward power concept simplifies logistics: replacement cells are widely available, and swapping depleted batteries restores full functionality without specialised tools. Practical benefits for quality assurance and day-to-day work By combining portability with targeted light output, this lighting solution helps standardise visual inspection conditions across different workstations and environments. The consistent illumination supports more repeatable assessments and can shorten the time needed for visual checks, contributing to smoother production flow. For purchasers seeking dependable optics accessories, Metav’s distribution ensures rapid availability and transparent order handling from Emmerich, with the reassurance of a broad product range and decades of precision expertise. For tailored advice on application and compatibility, contact Metav Werkzeuge for purchasing and delivery information; their specialists can confirm suitability for specific inspection tasks and arrange prompt supply from Emmerich. Technical Data Article number: MS904.028 Manufacturer: Peak Category: Optics Facts Batteries: 2× Type C (not included) Special features Compatible with Peak Zoom loupes Lighting for close-up inspection Image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b4/5f/c8/67/67c85fb49bcec1e3dfe77429/MS904028-main.jpg FAQ What power source does the lighting use? The lighting unit requires 2× Type C batteries; the MS904.028 is supplied without batteries. Is this illumination compatible with zoom loupes? Yes, the MS904.028 is designed to be compatible with Peak Zoom loupes for inspection and magnification tasks. Can the lighting be used away from a mains supply? Battery operation allows the unit to be used independently of mains power, suitable for mobile or field inspections. Does the product include mounting accessories? The delivery contents do not list mounting hardware; the MS904.028 is intended for integration with compatible magnification aids. Where can technical advice for applications be obtained? Application-specific guidance and compatibility checks can be provided by Metav Werkzeuge for the MS904.028 lighting module. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, standard template that streamlines optical inspection and supports consistent alignment across repeated checks. The combination of a clear reference format and straightforward handling helps reduce inspection time while improving repeatability. Order the Peak Standard Template No. 1 directly via Metav Werkzeuge or ask our consultants if needed. Peak Standard Template No. 1 — Optical alignment template for inspection A Peak Standard Template No. 1 designed as a simple reference for optical inspection and alignment in workshop inspection routines Peak standard template for optics Compact format for easy storage Enables consistent alignment during inspection Suitable for optical workshop workflows Faster, repeatable optical checks with less uncertainty The standardised reference offered by this template allows rapid, comparable checks during visual and optical inspection routines. By providing a fixed pattern for positioning and alignment, measurement variation is reduced and process times are optimised. For repetitive tasks, the template contributes to a predictable workflow and supports quality control measures that rely on consistent visual references rather than ad hoc setups. Integrates with common inspection workflows for greater efficiency Designed for use in optical environments, the template fits naturally into bench-based inspection stations and complements microscope-assisted checks. The simple format means it can be positioned quickly and reused across batches, which helps to maintain throughput without compromising the clarity of each inspection. This straightforward integration reduces setup steps and keeps the focus on the inspection result. Supports reliable documentation and process consistency Using a constant reference improves traceability in routine inspections and makes it easier to document conformity or deviations. The template is intended to assist with alignment and visual comparison tasks, helping teams achieve consistent outcomes across shifts and operators. Backed by Metav’s commitment to accessible precision, the product aligns with workshop needs for dependable, easy-to-adopt tools that support reproducible results. For reliable optical alignment in busy workshops, request the Peak Standard Template No. 1 from Metav Werkzeuge — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for tailored advice and order support Technical data Article number: MS905.273 Name: Peak Standard Template Type: No. 1 Facts Image file size: 470836 bytes Category path: Optik Special features Brand: Peak Asset URL: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d1/33/d0/67/67d033d142e38a433141d0ab/MS905273-main.jpg FAQ What is the Peak Standard Template No. 1 intended for? The Peak Standard Template No. 1 (SKU MS905.273) is intended as a reference for optical inspection and alignment tasks in workshop and inspection-bench environments. Can the template be used alongside microscopes for fine inspection? Yes. The template is suitable for use in conjunction with microscopes and other optical inspection equipment to support consistent visual checks. Which product category does this item belong to? This item is listed under the Optik category and serves as a basic alignment and reference tool for optical workflows. How does the template improve serial inspection routines? By providing a fixed reference, the template enables consistent placement and alignment across multiple parts, reducing variability between checks and supporting repeatable documentation. What information identifies this product for ordering? The product is identified as Peak Standard Template No. 1 with SKU MS905.273, which should be referenced when enquiring or ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 15× magnification, integrated illumination and compact dimensions to speed up visual inspections and reduce rework; order directly via Metav Werkzeuge or contact our consultants for technical guidance. Peak Illuminated Magnifier MS905.119 — 15× magnification with illumination The Peak Illuminated Magnifier is a compact optical aid designed for close inspection tasks in workshops, laboratories and jewellery workbench applications. 15× magnification for fine-detail inspection Integrated illumination for even lighting Wide Ø25 field of view for easier scanning Compact 180×36×42 dimensions for workshop use Inspect finer detail with reliable 15× magnification The combination of 15× magnification and a clear, Ø25 field of view enables precise visual checks of small components and surface features. This level of enlargement makes hairline defects, solder joints and fine engravings easier to evaluate, which reduces the need for repeated handling and speeds up quality assurance. The optical performance is geared towards repetitive inspection tasks where clarity and repeatability matter. Consistent illumination to reveal hidden faults An integrated illumination source delivers even, shadow‑reducing light across the viewing area so that textures and contrasts become more visible. For delicate work on circuit boards, jewellery or printed markings, the lit lens reduces eye strain and improves accuracy. The lighting is powered by Type C batteries (2× Type C, not included), ensuring portability and the freedom to work away from fixed power supplies. Compact, practical design for workshop workflows With compact 180×36×42 dimensions, the tool is easy to position at a workbench or pass between technicians without obstructing other tasks. The housing and form factor prioritise manoeuvrability in confined spaces, making the device suitable for inspection rounds and bench work alike. Portability, combined with the illumination and high magnification, supports efficient inspection cycles and smoother production flows. Clear specifications for purchasing and inventory The instrument is categorised in optics and supplies practical benefits for routine quality checks. The construction focuses on optical clarity and user convenience rather than complex electronics, which simplifies maintenance and replacement planning. Technical features such as magnification, field size and battery type are presented plainly to support procurement and ensure the magnifier integrates seamlessly into existing inspection routines. Contact Metav Werkzeuge today to discuss the Peak illuminated magnifier MS905.119, confirm suitability for specific inspection tasks or arrange swift delivery from our Emmerich hub at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.119 Brand: Peak Product name: Peak Illuminated Magnifier Facts Magnification: 15× Field of view: Ø25 Dimensions: 180×36×42 Battery: 2× Type C (not included) Special features Integrated illumination Category: Optics Compact design FAQ What level of magnification does the magnifier offer? The magnifier provides 15× magnification, suitable for detailed inspection of small components and fine craftsmanship. Is the lighting built in and what powers it? Yes, the device features integrated illumination powered by 2× Type C batteries (not included), allowing cordless use at the bench. Which inspection tasks is this magnifier best suited to? The instrument is ideal for tasks such as solder joint inspection, jewellery appraisal, stamp and print examination, and general small-part quality checks. How large is the visible area through the lens? The viewing area is specified as Ø25, offering a balance between magnified detail and a usable field for scanning small surfaces. Can the illuminator be used on portable inspection rounds? Yes, the integrated lighting and compact 180×36×42 dimensions make it convenient for mobile inspections and bench transfers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise 15× magnification combined with a lightweight aluminium housing and an anti-fog tube vent for reliable, uninterrupted inspection. Order the loupe directly via Metav Werkzeuge or contact our consultants for application advice. Peak Loupe A60D — 15× magnification, aluminium housing The Peak Loupe A60D is a compact inspection loupe designed for precise visual work on small components such as watches and jewellery. 15× magnification for fine inspection Lightweight aluminium housing Tubular vent prevents lens fogging Ideal for watches and jewellery inspection Sharper views for meticulous inspection The loupe provides 15× magnification, delivering a magnified, detailed view of fine structures without complicated optics. The single lens design keeps the optical path simple, which reduces visual distortion and makes measurement comparisons easier. For quality control and delicate assembly tasks, the enhanced visual clarity supports faster decisions and fewer rechecks, helping maintain production throughput while preserving accuracy in small-component inspection. Robust, portable design that endures workshop use Constructed from aluminium, the housing combines low weight with resistance to everyday wear in a workshop environment. The compact construction makes the loupe easy to carry between workstations and reduces hand fatigue during extended use. A small bore in the tube acts as an anti-fog vent, preventing condensation on the lens and ensuring a clear view even when ambient conditions change; as a result, interruptions due to lens fogging are minimised and inspection continuity is improved. Practical ergonomics that integrate into inspection workflows Designed for handheld inspection of small items, this loupe is especially suitable for precision tasks such as examining watch movements or assessing jewellery settings. The straightforward optical setup requires no calibration, so the device can be used immediately at bench stations or in combination with simple fixtures. By providing a reliable, repeatable view of fine details, the loupe reduces operator uncertainty and contributes to consistent quality checks across small-batch or repair operations. For precise inspection tasks and to discuss how the Peak Loupe A60D fits your workflow, contact Metav Werkzeuge for expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.300 Name: Peak Loupe A60D Type: A60D Manufacturer: Peak Category: Optik Facts Magnification: 15× Lens: 1x Special features Material: Aluminium Small tube bore prevents lens fogging Suited for watches and jewellery inspection FAQ What magnification does the loupe offer? The loupe provides 15× magnification, giving a detailed view suitable for inspection of very small features. Is the loupe suitable for watchmaking tasks? Yes, the design is well suited to watch inspection and repair; the Peak Loupe A60D is specifically recommended for watches and jewellery. How does the anti-fog function work? A small bore in the tube allows air exchange; this anti-fog vent prevents condensation from forming on the lens during changes in temperature or humidity. What material is the housing made from? The housing is made from aluminium, offering a balance of lightness and durability for daily workshop use. Does the loupe require calibration or special maintenance? No calibration is required; routine cleaning of the lens and keeping the tube vent clear are sufficient to maintain optimal performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Peak Thread Counter — Rectangular, 7x Peak Thread Counter is a compact inspection tool for Textile Quality Control, offering 7x magnification and an engraved mm scale for precise thread counting. Thread Counter with 7x magnification Engraved mm scale on both sides of base 15 x 15 mm field of view for precise counts Robust anodised aluminium, black finish Compact rectangular design for easy handling Exceptional accuracy for textile inspection The Peak Thread Counter delivers accurate counts and reliable measurements for fabric analysis. With 7x magnification and a clear 15 x 15 mm field of view, users can identify individual threads and calculate thread density quickly. The engraved mm scale on each side of the base corresponds to the width of the observed area, which simplifies direct measurements and reduces the need for secondary tools. This precision supports quality control routines and speeds up inspection workflows without sacrificing repeatability. Durable design that supports frequent use Constructed from aluminium with a black anodised finish, the Thread Counter combines lightweight handling with robust durability. The rectangular shape ensures a stable base and comfortable grip for repeated use in production or laboratory settings. The compact footprint means the instrument is easy to store and transport between workstations, while the metal construction resists wear from regular contact with fabrics and tools. This design reduces downtime and maintenance, benefiting busy quality teams and technical users. How it works and why it’s easy to use A simple optical arrangement with a single lens provides an enlarged view of the textile surface, making individual filaments visible without complex setup. The mm scale is engraved on both sides of the foot, and its length equals the width of the field of view, allowing direct read-off of distances and counts. For users unfamiliar with optical magnification: 7x magnification makes details appear seven times larger than unaided vision, improving accuracy when counting threads per millimetre. No calibration is required for everyday inspections. Who benefits most from this instrument Textile Technicians, Quality Inspectors and Hobbyists engaged in fabric work will find the Thread Counter especially useful for assessing weave, verifying fabric specifications and documenting production samples. Its combination of portability, clear scale and robust materials makes it suitable for both laboratory benches and on-site checks in manufacturing. The straightforward operation and visible scale also make it a helpful teaching aid for training staff in inspection procedures. We recommend the Peak Thread Counter for reliable, fast textile inspection — for expert advice contact Metav Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Thread Counter (Fadenzähler), rectangular, 7x Marke: Peak SKU: MS905.378 Magnification: 7x Lens: x1 Field of view: 15 x 15 mm Material: Aluminium (black) Special feature: Engraved mm scale on each side of the base Additional information: A mm scale is engraved on each side of the foot; the scale length corresponds to the width of the field of view UID: MS905.378 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What magnification does the Peak Thread Counter provide? The Peak Thread Counter offers 7x magnification, allowing clear visualisation of individual threads within the 15 x 15 mm field of view for precise counting. Is the Thread Counter by Peak suitable for industrial quality control? Yes, the Peak Thread Counter is designed for textile inspection and quality control; its engraved mm scale and robust aluminium construction make it appropriate for regular use in production environments. How do I read measurements with the engraved scale on the Peak Thread Counter? Read the engraved mm scale that is on each side of the base; the scale length equals the width of the field of view, so measurements can be taken directly without additional conversion. Can I use the Peak Thread Counter for hobby or educational purposes? The Peak Thread Counter is well suited for hobbyists and training settings due to its simple operation, compact design and visible mm scale that aids learning and demonstrations.

Information conflict: magnification is specified as "x2" and "8x" for SKU MS905.381 (Peak Fadenzähler), which may cause confusion for users or customers trying to determine the correct magnification level of the product, as the discrepancy between "x2" and "8x" could lead to misunderstandings about its actual capabilities, functionality, or intended use, potentially impacting purchasing decisions or user satisfaction, especially for those requiring precise magnification specifications for professional or technical applications, such as in fields like microscopy, inspection, or detailed craftsmanship, where accuracy in magnification is critical, and any inconsistency in product descriptions might undermine trust in the product's reliability or the manufacturer's attention to detail.

Combine precise 10x magnification with an integrated illumination and a compact 25 mm viewing field for reliable inspection of small components; the slim dimensions ensure comfortable handling in routine quality checks. Order the Peak Leuchtlupe directly via Metav Werkzeuge or ask our consultants if needed. Peak Leuchtlupe 10x — Illuminated Handheld Loupe for Inspection A compact illuminated loupe, the Peak Leuchtlupe delivers 10x magnification and a 25 mm field of view for detailed visual inspection in electronics, watchmaking and quality control tasks. 10x magnification for fine inspection Illuminated lens for consistent lighting 25 mm viewing field for precise focus Runs on 2x Type-C batteries (not included) Inspect small details with clear, illuminated optics The combination of 10x magnification and an integrated light source improves visual contrast and reduces eye strain during repetitive checks. The illuminated lens provides an even beam across the viewing area, making fine solder joints, engravings and component markings easier to evaluate. For users unfamiliar with optical terms: magnification indicates how much larger an object appears through the lens, while the viewing field specifies how wide the observable area is — a 25 mm viewing field balances magnification and context so that both detail and part orientation remain visible. Compact format that supports practical workflow With slim external dimensions (175×35×41 mm), the loupe is designed for handheld use and rapid inspection routines without adding bulk to a workstation. The modest footprint allows it to be kept at a bench or carried in a toolbox, supporting mobile quality checks or assembly-line sampling. The lightweight profile ensures steady handling; combined with a steady light source, this reduces the need for frequent readjustments and helps maintain an efficient workflow during repetitive visual tasks. Power and maintenance explained simply Power is supplied by 2x Type-C batteries (not included), a common and easily sourced format that keeps downtime to a minimum. The battery compartment is straightforward to access and replace, which simplifies on-site renewal without specialist tools. Routine maintenance is limited to occasional lens cleaning with a soft, lint-free cloth and checking battery contacts; this conservative care routine contributes to reliable performance over time and low operational costs. Why this tool fits professional inspection tasks The loupe is a purpose-built optical aid for precision work in sectors such as electronics repair, jewellery inspection and fine mechanics. Its illuminated optics and defined viewing field make dimension checks and defect detection faster and more consistent than unaided visual inspection. For procurement and quality managers, the tool offers a practical balance of optical performance and portability, enabling standardised visual checks across multiple workstations. Contact Metav Werkzeuge for tailored advice on integrating the Peak Leuchtlupe into inspection routines or to request order support from our Emmerich team Technical data Article number: MS905.118 Brand: Peak Product name: Peak Leuchtlupe Dimensions: 175×35×41 mm Viewing field: Ø25 mm Magnification: 10x Batteries: 2x Type C (not included) Illumination: integrated light Category: Optik Notable feature: mit Beleuchtung Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ff/10/d0/67/67d010ff2285a7cc9c2fed20/MS905118-main.jpg FAQ Is the loupe suitable for electronics inspection? The Peak Leuchtlupe is well suited for electronics inspection thanks to its 10x magnification and integrated illumination, which aid in examining solder joints and small components. What power source is required? Power is provided by 2x Type-C batteries; the Peak Leuchtlupe requires these cells and they are not included. How large is the viewing area through the lens? The viewing field measures Ø25 mm, offering a practical balance between magnified detail and the visible area for component orientation. How should the lens be cleaned? Clean the lens of the magnifier with a soft, lint-free cloth; avoid abrasive cleaners and never submerge the unit in liquids. Is the loupe suitable for watchmaking and jewellery checks? Yes, the combination of 10x magnification and consistent LED illumination makes the loupe suitable for fine inspection tasks in watchmaking and jewellery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise close-up measurement with the combination of 20 dioptre magnification, a coated optical lens and a compact 0–19 mm measuring range for reliable visual inspection and reproducible readings to 0.05 mm; order via Metav Werkzeuge or contact the consultants for application advice. Precision measuring loupe M503.128 – 20 dioptre, coated lens (Metav IndustryLine) A compact optical measuring aid, the Precision measuring loupe M503.128 supports detailed inspection and visual measurement of small components in workshop and laboratory environments. 20 dioptre magnification Coated optical lens Measuring range 0–19 mm Reading resolution 0.05 mm Accuracy for close-range measurement The instrument is engineered to make visual measurement both fast and dependable: with a measuring range of 0–19 mm and a reading resolution of 0.05 mm, the loupe converts close inspection into quantifiable results, reducing guesswork during quality checks. The high 20 dioptre power gives a pronounced enlargement of fine edges and markings, so small deviations become visible without complex auxiliary optics. This clarity shortens inspection cycles and supports more efficient decision-making on pass/fail criteria. Optical performance that reduces rework A coated optical lens improves contrast and suppresses reflections, which is particularly beneficial when examining metallic surfaces or polished plastics under bright workshop lighting. The anti-reflective treatment enhances edge definition and visual comfort during extended use, helping operators maintain consistent assessments. By making defects easier to spot earlier in the process, the loupe contributes directly to lower scrap rates and fewer corrective operations. Compact design for practical handling With compact dimensions of 29×Ø29 and a lightweight plastic housing, the tool is easy to handle at the bench or on a production line. The small footprint and ergonomic form factor suit repetitive inspection tasks and enable steady positioning over microgeometries or connector pins. Durability is supported by the robust housing material, while the optical design keeps focal adjustment straightforward for rapid switching between components. Where this instrument adds value The loupe is ideal for electronics assembly, watchmaking, surface inspection and small-part quality control, where quick visual confirmation must be paired with measurable data. Using this device, inspection routines become more standardised: features that once required larger instruments can be reliably checked in situ, saving time and helping to maintain flow in busy workshops. For customers aiming to raise throughput without sacrificing scrutiny, the loupe offers a compact, efficient option. For purchase or tailored technical advice on the Metav IndustryLine Precision measuring loupe, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M503.128 GTIN: 4054469144610 ECLASS: 21170343 Customs tariff number: 90138090 Category: Optics Brand: Metav IndustryLine Facts Dioptre: 20 Measuring range: 0–19 mm Reading / resolution: 0.05 mm Dimensions: 29×Ø29 Visual enlargement: high-magnification class Special features Housing material: plastic Lens surface: coated (anti-reflective) Focusing: adjustable Intended use: close visual measurement and inspection FAQ What magnification does the loupe offer and how does it affect inspection? The Precision measuring loupe M503.128 uses a 20 dioptre optical system to provide pronounced enlargement, enabling detailed observation of edges and markings that improves the reliability of visual checks for small components. Can the instrument deliver measurable readings for quality control? Yes. The instrument combines visual enlargement with a measurable range of 0–19 mm and a reading resolution of 0.05 mm, making the tool suitable for quick in-process checks where documented visual measurements are required. Is the optical surface treated to reduce glare on metallic parts? The lens is coated, providing improved contrast and reduced reflections; this makes the loupe particularly effective when inspecting polished metals or reflective plastics under workplace lighting. Which applications are best suited to this measuring loupe? The device is well suited to electronics assembly, precision mechanics and component inspection tasks on the workshop floor where compact, repeatable visual measurement is needed; the Metav IndustryLine instrument is designed with these routines in mind. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine the 2.0x magnification with a standard C‑mount (25.4 mm) interface to extend imaging capability without changing the camera or objective; the robust adapter is designed for quick integration and consistent documentation. Order the CCD Adapter directly via Metav Werkzeuge or contact our consultants for compatibility advice. CCD Adapter DH‑C2.0 — 2.0x magnification, C‑mount (25.4 mm) by Metav IndustryLine A CCD Adapter that converts standard C‑mount cameras to enhanced optical inspection roles, providing stable 2.0x image enlargement for microscopy, quality assurance and visual documentation. 2.0x magnification for enlarged imaging C‑mount interface, 25.4 mm standard diameter Compact adapter for inspection optics Compatible with Metav IndustryLine CCD cameras Faster integration for inspection and measurement systems The adapter delivers 2.0x magnification while retaining the C‑mount standard, which simplifies mechanical and optical integration into existing setups. This combination reduces the need for additional sensor changes and keeps the optical path predictable, enabling rapid setup in production environments. The compact design supports straightforward alignment and repeatable mounting, so inspection loops and documentation processes become more efficient without compromising system throughput or traceability. Consistent image quality for documentation and analysis Designed for stability and repeatability, the unit maintains focus quality across the field of view and suits common CCD sensors used in industrial imaging. With a fixed 25.4 mm connection, the adapter minimises variable interfaces that can introduce vignetting or misalignment; this ensures reliable images for measurement, process control and archived documentation. The Metav IndustryLine pedigree contributes to consistent manufacturing tolerances and component fit, which supports long‑term reproducibility of captured images. Practical compatibility advice and system planning The adapter matches a wide range of C‑mount cameras and is intended for use in microscopy, bench inspection and machine‑vision pre‑applications where a modest, defined magnification boost is required. When integrating the adapter, consider sensor size and objective focal length to calculate resulting field of view and working distance; this avoids surprises in coverage or resolution. For procurement and system matching, reference M503.251.4 and provide camera sensor details when requesting confirmation to ensure components fit as expected. For system integration or to confirm camera compatibility, contact Metav Werkzeuge to discuss the Metav IndustryLine CCD Adapter (M503.251.4) and secure the correct configuration for inspection or documentation tasks Technical Data Article number: M503.251.4 GTIN: 4054469145310 eClass: 34551207 Manufacturer: Metav IndustryLine Facts Magnification: 2.0x Connection: C‑mount, 25.4 mm Type: DH‑C2.0 Category: Optik Special features Compact form factor for stable mounting Intended for microscopy and inspection use Image enlargement without camera modification FAQ Is this adapter compatible with standard C‑mount cameras? Yes. The adapter accepts a C‑mount (25.4 mm) connection and is compatible with common C‑mount CCD cameras; provide sensor size details to ensure the expected field of view. What magnification does the adapter provide and how does it affect field of view? The DH‑C2.0 offers 2.0x magnification, which reduces the field of view relative to a direct mount; calculate based on camera sensor size and objective focal length for precise coverage planning. Can the adapter be used for both microscopy and machine‑vision inspections? Yes. The adapter suits microscopy, bench inspection and preliminary machine‑vision applications where a defined, modest magnification increase is required. Which identifier should be quoted when ordering or enquiring? Quote the SKU M503.251.4 and the product type DH‑C2.0 to ensure the correct Metav IndustryLine adapter is supplied. Does the adapter include any additional lenses or mounting accessories? The main delivery covers the adapter itself; specify required mounting rings or extension components when enquiring to confirm compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise visual enlargement and reliable optical performance: the 2.0× magnification delivers clearer detail for inspection tasks while maintaining image sharpness and contrast. Order the Supplementary lens DH-W2.0 directly via Metav Werkzeuge or consult our specialists for compatibility advice. Supplementary lens DH-W2.0 — 2.0× magnification for video microscopes (Metav IndustryLine) the Supplementary lens DH-W2.0 extends the magnification range of compatible video microscopes for detailed visual inspection in laboratories and production environments 2.0× magnification boost Quick attachment to camera optics Preserves image sharpness and contrast Designed for video microscopes Greater detail where inspection demands it The 2.0× magnification increases the effective image scale, making fine structures and surface defects more visible without changing primary objectives. By enlarging the projection on the sensor, the supplementary optics improve visual resolution for defect analysis and component verification while keeping optical clarity and contrast at a practical level. This approach reduces the need for multiple objective swaps and supports efficient routine inspection workflows. Simple integration with existing imaging setups Designed for straightforward incorporation into microscopy chains, the accessory attaches directly to the camera or intermediate optical tube on compatible systems, minimising setup time and mechanical modification. As an add-on for video microscopes, the element preserves the focal plane and maintains field homogeneity when aligned correctly, enabling fast changeovers between inspection stations and steady throughput on the production line. Practical benefits for quality control and R&D In industrial and laboratory contexts the lens offers a pragmatic way to extend magnification without investing in separate objectives. The result is improved visual assessment for electronics inspection, materials analysis and component assembly checks while maintaining operational simplicity. Backed by the Metav distribution model, the item supports continuity of supply and predictable sourcing for manufacturing and service operations. For tailored advice on integrating the DH-W2.0 into existing inspection systems, contact Metav Werkzeuge for specification matching and order assistance: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.255.3 GTIN: 4054469145396 Tariff number: 90119090 Manufacturer: Metav IndustryLine Facts Magnification: 2.0× Special features Type: DH-W2.0 Category: Optik Application: increases magnification for video microscopes Asset: m5032551-main.jpg FAQ What magnification does this lens provide? The DH-W2.0 supplementary lens provides a 2.0× magnification factor, effectively doubling the image scale for compatible video microscopes (SKU M503.255.3). Will the lens fit every video microscope? Compatibility depends on the optical mount and system geometry; the accessory is intended for video microscopes with a matching adapter or tube connection and should be checked against the imaging chain before installation. Does the lens affect image quality? When correctly mounted and aligned, the lens preserves image sharpness and contrast while increasing apparent detail; image quality is influenced by the host optics and sensor resolution. Can the enlarged image be used for measurements? Enlargement changes the scale on the sensor, so any measurement workflow requires recalibration of the imaging system to ensure traceable results and correct scaling. What is included with the delivery? The delivery includes the lens unit identified by SKU M503.255.3; consult the product listing for available accessories and mounting adapters Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from reliable hands-free inspection with dual 2.2x and 3.3x magnification and a secure Velcro fastening, compatible with spectacle wearers; order the Peak head loupe directly via Metav Werkzeuge or request specialist advice from our consultants. Peak head loupe MS905.318 — 2.2x & 3.3x magnification, Velcro fastening The Peak head loupe is a hands-free magnifier designed for close visual inspection and fine assembly tasks, offering two levels of magnification for versatile use in workshops and labs. Hands-free head loupe with Velcro fastening Dual magnification: 2.2x and 3.3x Suitable for spectacle wearers Enhanced visual control for reliable inspection Equipped with two magnification settings — 2.2x and 3.3x — this head loupe provides clear enlargement for quality checks and delicate assembly. The selectable magnifications support a range of tasks, from broader component alignment to detailed surface inspection, enabling fewer repositionings and faster decision-making on the shop floor. By reducing the need to hunch over workpieces, the loupe contributes to steadier hands and more consistent results during repetitive operations. The design supports precision work without introducing complexity, making magnified inspection straightforward for technicians and craftsmen. Secure fastening and compatibility with spectacles The integrated Velcro fastening allows rapid adjustment and a secure fit for varied head sizes and working postures. As the device is expressly marked as compatible with spectacle wearers, the mounting system avoids interference with frames while maintaining a stable optical axis. This practical fastening method suits environments where quick removal and reapplication are necessary between tasks. The combination of a secure attachment and spectacle compatibility minimises interruptions, keeps the optical view centred and supports longer inspection sessions with reduced handling. Practical benefits that improve workflow efficiency A hands-free loupe frees both hands for manipulation, assembly and measurement, streamlining common workshop processes and reducing cycle times. The simplicity of the Peak head loupe means it can be introduced into existing workflows without additional training or fixtures. For professionals engaged in electronics, watchmaking, jewellery, optics or any precision inspection, the loupe offers a compact and reliable enhancement to visual acuity. Should further compatibility checks or application advice be required, Metav’s product specialists can provide guidance to ensure the loupe meets the specific demands of the task at hand. Contact Metav Werkzeuge in Emmerich for tailored advice and availability on the Peak head loupe MS905.318 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.318 Brand: Peak Product name: Head loupe Facts Magnification: 2.2x, 3.3x SKU: MS905.318 Special features Velcro fastening Compatible with spectacle wearers FAQ What magnification options does the loupe offer? The loupe provides 2.2x and 3.3x magnification, giving a choice between a wider field of view and higher detail for close inspection with the Peak head loupe MS905.318. Can the loupe be worn over regular spectacles? Yes, the product is specified as compatible with spectacle wearers, and the Velcro fastening allows adjustment to accommodate frames while keeping the optical axis stable. How is the loupe attached and adjusted? Attachment and size adjustment are handled via the Velcro fastening, enabling quick fitting and a secure hold during routine inspection tasks. Which tasks is the loupe best suited for? The head loupe is suitable for fine-detail inspection and assembly work, such as electronics, watch or jewellery inspection, optical checks and any task requiring hands-free magnification. Is the loupe practical for extended use? Designed for hands-free operation with an adjustable fastening, the loupe supports prolonged inspection sessions by keeping both hands free and reducing the need for frequent repositioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Thanks to its flexible magnification range and secure head fitting, this loupe combines adaptable visual performance with hands-free comfort for repetitive inspection tasks. Use the Peak head loupe for precision visual checks in optics, electronics and fine assembly — order directly via Metav Werkzeuge or consult our specialists for suitability and application advice. Peak head loupe MS905.317 — 2.2x–5.2x magnification, Velcro fastening Peak head loupe MS905.317 is a compact head-mounted magnifier designed for detailed inspection and assembly tasks in optics and precision workshops Peak head loupe with four magnification levels Velcro fastening for secure head fit Suitable for spectacle wearers Hands-free inspection for detailed work Precision at varying scales for thorough inspection The head-mounted loupe provides four distinct magnification levels — 2.2x, 3.3x, 4.1x and 5.2x — enabling clear visual grading of small components without changing work posture. This graded optical range supports both broad overview checks at lower magnification and focused inspection at higher levels, reducing the need for multiple tools and speeding up visual quality control. The specification of several optical powers allows a rational selection for each inspection task, improving throughput while maintaining consistent visual clarity. Secure, hands-free operation that supports productivity Equipped with a reliable Velcro fastening, the loupe stays firmly in position during prolonged tasks, allowing operators to keep both hands free for tools and measuring instruments. Hands-free inspection reduces handling errors and shortens cycle times in repetitive assembly or measurement processes. Comfortable mounting and steady alignment help preserve consistent working distance, which in turn supports repeatable visual checks and a measurable increase in operational efficiency on the shop floor. Designed to work with spectacle wearers and fine measurement The specification explicitly states suitability for spectacle wearers, so the loupe accommodates operators who require corrective lenses without compromising field of view or comfort. This compatibility is especially relevant when visual checks must be combined with precision measurement routines, where maintaining correct eye position and focus is essential. The optical arrangement helps maintain an effective working distance for both inspection and comparative verification against caliper readouts and other gauges. Practical optics for workshop and laboratory use As a dedicated tool from the optics category, the loupe supports a wide range of close-vision tasks in electronics, watchmaking, optical assembly and similar trades where visual detail is critical. The combination of selectable optical powers and a secure head mount makes it a dependable aid for both short inspection intervals and extended benchwork. Where consistent visual performance matters, this head-mounted magnifier contributes to steadier results and fewer rework steps, aligning with operational goals for quality and repeatability. Contact Metav Werkzeuge to discuss how the Peak head loupe MS905.317 can improve inspection accuracy in the workplace; our consultants in Emmerich are available by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com for technical guidance and ordering support Technical data Article number: MS905.317 Brand: Peak Type: Head loupe Core data Magnification: 2.2x / 3.3x / 4.1x / 5.2x Special features Velcro fastening Suitable for spectacle wearers Category: Optics FAQ How many magnification settings does the loupe offer? The Peak head loupe MS905.317 offers four discrete magnification settings: 2.2x, 3.3x, 4.1x and 5.2x to suit a range of inspection needs. Can the loupe be used while wearing glasses? Yes, the loupe is specified as suitable for spectacle wearers and is designed to be worn comfortably over corrective lenses. Is the head fastening adjustable for different head sizes? The Velcro fastening provides an adjustable, secure fit that adapts to a wide range of head sizes and hair conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact and highly portable inspection capability combined with 200× magnification and an accurately graduated 0.005 mm scale provides fast visual checks and measurable results for workshop and field tasks. Order directly via Metav Werkzeuge or consult the technical team for suitability and supply. M503.119 Handheld microscope — 200× with LED and 0.005 mm scale (Metav IndustryLine) The M503.119 handheld microscope is a compact inspection instrument offering high magnification and integrated illumination for fast quality checks and simple measurement tasks in production, maintenance and incoming inspection. 200× magnification for detailed inspection 0.005 mm scale division for precise measurements Integrated LED illumination for clear images Compact polyamide housing, weight 0.1 kg High-magnification inspection in a compact format This handheld inspection device delivers 200× magnification, enabling close examination of fine structures that are otherwise difficult to assess with the naked eye. The design emphasises portability and ergonomics, with a lightweight 0.1 kg body and small footprint (50 × 23 × 138 mm) for use at benches, machines or on-site. The reduced mass and slim form factor help to lower fatigue during repetitive checks and permit rapid visual screening across multiple components. Measurable results thanks to fine graduated scaling A 0.005 mm scale division offers a clearly defined measurement increment for rough sizing and comparative checks directly under magnification. The scale, combined with a 1.1 mm field of view, allows readable comparative measurements of edges and surface features; the graduation supports quick verification of critical dimensions in assembly or quality control operations. This measurable output reduces the need for repeated handling and speeds decision-making in production workflows. Robust optics and illumination for consistent readings Optical performance is supported by a coated lens, improving contrast and light transmission for sharper images. Integrated LED illumination provides steady, shadow‑reduced lighting for inspection in poorly lit environments, ensuring consistent visibility of details. The housing is manufactured from polyamide, combining impact resistance with a lightweight build suitable for workshop conditions. These attributes make the instrument a reliable aid for maintenance teams, quality inspectors and technical staff requiring immediate visual assessment. For advice on integrating Metav IndustryLine optical tools into workshop routines or to request supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants will confirm suitability and delivery options. Technical Data SKU: M503.119 GTIN: 4054469144535 Weight: 0.1 kg Dimensions: 50 × 23 × 138 mm Data Magnification: 200× Scale division: 0.005 mm Field of view: 1.1 mm Dioptre/magnification value: 200 Special features Housing made from polyamide Coated lens for improved contrast Integrated LED illumination Graduated scale included (type: G) Intended for visual inspection and simple measurements FAQ How precise are the measurements with this handheld microscope? Measurements with the M503.119 handheld microscope rely on the visible 0.005 mm scale divisions; they are suitable for quick comparative checks rather than replacement of laboratory metrology instruments Is the illumination suitable for low-light environments? Yes. The integrated LED illumination provides even, stable lighting to support clear observation and reading of the scale on the Metav IndustryLine handheld microscope What materials are used for the housing and optics? The instrument features a polyamide housing for durability and a coated lens to enhance image clarity and contrast Can this instrument be used directly at production machines? The compact dimensions and lightweight construction make it suitable for on‑machine or at‑bench inspections where rapid visual checks and rough measurements are required What identifiers should be quoted when enquiring about this product? Please reference the product as Metav IndustryLine M503.119 handheld microscope (SKU M503.119, GTIN 4054469144535) when requesting technical information or supply Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection tool that combines 200× magnification, a coated objective lens and switchable LED lighting for reliable visual checks on the shop floor. The combination of precise optics, robust polyamide housing and very low weight supports fast, repeatable inspections. Order the device directly via Metav Werkzeuge or request advice from our consultants. Handheld microscope M503.118 — 200× magnification with LED illumination (Metav IndustryLine) The M503.118 is a compact handheld microscope designed for rapid visual inspection and close-up quality control in workshops, production lines and service environments. 200× magnification for fine-detail inspection Switchable LED illumination for clear contrast Coated objective lens for reduced reflections Lightweight 0.05 kg; compact 50 × 23 × 138 mm Precision where detail matters The core advantage is the 200× magnification, which enables clear visualisation of microstructures, solder joints and surface flaws that are invisible to the naked eye. The coated objective lens reduces stray reflections and improves contrast, making defect recognition faster and more reliable. For users unfamiliar with optical terms: a coated lens means multiple thin-film layers have been applied to the glass to suppress glare and increase light transmission — a straightforward measure that delivers clearer images without complex settings. Designed for practical, everyday inspection Built with a polyamide housing, the unit resists knocks and handling typical for workshop use while remaining exceptionally light at 0.05 kg. The compact dimensions (50 × 23 × 138 mm) and single-handed form factor support quick checks across production stations, assembly benches or service calls. The integral LED illumination is switchable, providing consistent light without the need for external lamps; this simplifies workflows and reduces setup time during repetitive inspection tasks. Suitable applications and confidence in supply This portable optic is suited to routine quality control, electronic assembly checks, material surface evaluation and hobbyist uses where compactness and clarity are priorities. The combination of proven optical design and durable housing means the device performs well in busy industrial environments. Metav’s role as a precision partner ensures reliable delivery and a quality filter for the European market — a practical reassurance when equipping multiple workstations or service teams. Contact Metav Werkzeuge today for technical advice or to request the Metav IndustryLine M503.118 handheld microscope with 200× magnification and LED illumination Technical Data SKU: M503.118 GTIN: 4054469144528 eClass: 32130101 ETIM: EC001685 Customs tariff number: 90111090 Manufacturer: Metav IndustryLine Numbers / Core technical data Magnification: 200× Weight: 0.05 kg Dimensions (L × W × H): 50 × 23 × 138 mm Field of view: 1.1 mm Special features / Designs Housing: polyamide Lens: coated Illumination: switchable LED Category: Optik FAQ What magnification does the device provide? The M503.118 provides 200× magnification, suitable for close inspection of fine details and small components. Is the objective lens treated to reduce reflections? Yes — the M503.118 features a coated objective lens, improving contrast and reducing glare for clearer observation. How large is the visible field when inspecting? The visible field is approximately 1.1 mm, which balances magnification with a usable area for focused inspections. How portable is this inspection tool? Weighing 0.05 kg with compact dimensions of 50 × 23 × 138 mm, the unit is designed for single-handed, mobile use across production and service environments. Which environments and tasks is the microscope suited for? It is appropriate for workshop quality control, electronic assembly checks, surface inspections and similar tasks where a compact, illuminated handheld optic is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 40× magnification and a Ø20 mm precision lens for fast, reliable visual inspection; the integrated LED illumination ensures consistent lighting while the low weight supports prolonged handheld use. Order the loupe directly via Metav Werkzeuge or consult the experts for tailored advice. Hand lens M503.144 – 40× magnification, Ø20 mm lens, Metav IndustryLine Hand lens M503.144 for close visual inspection and quality control in workshops, laboratories and precision trades; a compact inspection lens designed for detailed work on small components and fine surfaces 40× magnification for fine detail Ø20 mm glass lens for sharp imaging Built-in LED illumination for shadow-free view Lightweight 200 g for portable inspection Precise close-up inspection for quality assurance The compact loupe delivers a magnification of 40×, which transforms tiny surface features into clearly discernible details and makes it easier to identify burrs, hairline cracks and assembly faults. The Ø20 mm optical element is optimised for a balance between field of view and resolving power: it provides a focused image area large enough to inspect small components without compromising sharpness. The combination of magnification and a high-quality lens supports quicker visual decisions during incoming inspection and final checks, reducing rework and improving process efficiency. The instrument’s svelte form helps retain steady handling for repetitive tasks, contributing to consistent inspection outcomes. LED illumination that speeds inspection and reduces eye fatigue An integrated LED light delivers even, shadow-minimised illumination that improves contrast and reveals surface textures that would otherwise remain hidden under ambient lighting. Consistent lighting reduces the need for frequent repositioning, accelerating routine checks and helping operators maintain productivity during longer inspection cycles. The inspection lens is designed to work with replaceable batteries, allowing uninterrupted use in remote workstations or on the shop floor. The robust illumination system also supports visual tasks under variable workshop lighting, making the loupe suitable for electronics, engraving and fine mechanical work. Portable design for craftsmen and precision technicians Weighing in at just 200 g, the loupe is engineered for portability and comfortable handheld use across prolonged periods. Its compact footprint and ergonomic balance suit jewellers, watchmakers, electronics technicians and quality control personnel who require a reliable, transportable optical aid. The durable construction withstands everyday workshop conditions while the clear optics maintain image fidelity over time. For facilities seeking cost-effective inspection aids, this loupe combines essential optical performance with low handling effort, helping teams maintain inspection throughput without complex fixtures or setup. Speak to Metav Werkzeuge in Emmerich for expert advice on inspection optics and reliable supply from our European quality hub Technical Data Article number: M503.144 GTIN: 4054469163246 Eclass: 21170614 Weight: 0.2 kg Facts Magnification: 40× Lens diameter: Ø20 mm Diopter: 40 Category: Optik Special features Integrated LED illumination Compact, handheld design Suitable for workshop and laboratory inspection Manufacturer: Metav IndustryLine FAQ What level of magnification is provided? The hand lens M503.144 provides 40× magnification, suitable for inspecting small defects and fine details in components. What size is the viewing lens? The inspection optic features a Ø20 mm lens, chosen to balance a usable field of view with high image sharpness. Is the loupe illuminated? Yes, the M503.144 includes an integrated LED light to ensure even, shadow-free illumination during inspection. Which applications suit this loupe? This loupe is ideal for jewellers, watchmakers, electronics technicians and workshop quality control where detailed visual checks are required. Is the instrument easy to carry between workstations? Yes, the loupe’s lightweight design (0.2 kg) and compact dimensions make the M503.144 convenient for portable, handheld use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 20x magnification, a lightweight aluminium body and a vented tube that prevents lens fogging, this inspection loupe delivers precise, fatigue‑reduced examination of small parts; order the Peak A80D via Metav Werkzeuge or request tailored advice from our consultants. Peak A80D Loupe — 20x magnification, aluminium housing Peak A80D Loupe is a compact inspection loupe designed for detailed work on watches, jewellery and other small components where clear, dependable magnification is essential 20x precision magnification Aluminium housing for durability Vent in tube prevents lens fogging Ideal for watches and jewellery inspection See tiny features clearly and reduce rework The 20x optical power provides a focused view of minute details, enabling reliable detection of surface defects, soldering flaws or hallmark stamps. As a precision inspection tool, the loupe shortens inspection time by making faults plainly visible, which supports more efficient quality control and fewer callbacks. The instrument’s clear optics translate technical capability into practical benefit: faster decisions and better documented results for small‑part manufacturing and repair. Comfortable, interruption‑free working for prolonged use Constructed with a lightweight aluminium housing and an engineered tube vent, the loupe reduces operator fatigue and prevents sudden lens clouding during temperature changes. The small anti‑fog aperture in the tube maintains a usable field of view during extended sessions, so inspections continue without pauses for cleaning. Ergonomic handling and steady optics mean longer, more productive measuring or assembly periods when dealing with fine components. Durable, workshop‑ready design that is easy to maintain The straightforward mechanical design keeps servicing minimal: robust casing resists everyday knocks and the optical tube can be wiped clean with standard lens cloths. As a compact inspection loupe, it bridges bench‑level craftsmanship and precision metrology by offering repeatable, visible results across routine tasks. Its suitability for delicate applications such as watch repair and jewellery assessment makes it a pragmatic addition to any workshop toolkit focused on quality and longevity. Choose the Peak A80D for dependable 20x inspection—contact Metav Werkzeuge in Emmerich for availability and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS905.301 Model: A80D Brand: Peak Facts Magnification: 20x Lens count: 1 (single lens optical tube) Material: Aluminium Special features Small vent in tube to prevent lens fogging Suitable for watches and jewellery inspection Category: Optics Image asset available: MS905301-main.jpg FAQ What magnification does the loupe provide? The loupe offers 20x magnification, enabling clear inspection of fine details on small components. Is the loupe suitable for watch and jewellery work? Yes, the Peak A80D is specifically suitable for watch and jewellery inspection and other tasks requiring close visual inspection of small parts. How does the anti‑fog feature work? A small vent in the optical tube allows air exchange that reduces condensation on the lens, keeping the field of view clear during temperature changes. What material is the housing made from and is it durable? The housing is made from aluminium, providing a durable yet lightweight construction suited to workshop use. Manufacturer: Peak; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact precision for routine optical checks: the Ø20 mm aperture delivers consistent reference points, while the standard format simplifies integration into inspection setups. Benefit from dependable repeatability and straightforward handling — order via Metav Werkzeuge or consult our specialists for application advice. Peak Standard Template (Ø20 mm) – Optical calibration gauge Peak Standard Template for basic optical checks and routine calibration in inspection and microscope alignment applications. Standard optical reference Ø20 mm Supplied as a single piece for traceability Designed for simple integration into inspection rigs Reliable references that reduce rework and inspection time The template provides a stable reference for repeated optical checks, helping to reduce unnecessary re-measurements and rework. Built as a standard item, the device supports quick verification processes and minimises downtime between tests. By using a consistent aperture size, operators achieve uniform results across multiple checks, improving throughput in small-series or workshop environments. The emphasis is on measurable benefits: faster set-up and fewer ambiguous readings during visual inspection. Integration into everyday inspection workflows Configured in a standard format, the gauge is suitable for straightforward placement within existing inspection jigs and optical benches. Its Ø20 mm aperture offers a recognisable datum that aligns with common calibration routines, allowing technicians to validate optical paths or align components with minimal adjustment. This simplicity makes the unit a practical addition to workshops and labs that require dependable, repeatable references without complex fixtures or special training. Clarity in results and easy documentation Using a uniform reference piece enhances traceability and eases the documentation of inspection results. When recorded alongside measurement data, the presence of a standard template helps establish consistent pass/fail criteria and supports quality audits. The standardised format reduces interpretation variance between operators, so acceptance criteria remain stable and downstream decisions are better founded on reliable optical checks. Practicality for small workshops and service departments Supplied as an individual item and categorised for optical use, the template suits smaller operations that prioritise cost-effective precision. Its compact nature facilitates storage and fast deployment, while the standard design keeps training requirements low. For service departments that manage diverse inspection tasks, a simple, dedicated optical reference can streamline daily routines without the need for elaborate calibration equipment. For consistent optical calibration and straightforward integration, request the Peak standard template (SKU MS905.272) through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: MS905.272 Brand: Peak Designation: Peak Standardschablone Variant: einzeln, Ø20mm Category: Optik Facts Diameter: Ø20 mm Special features Standard template for optical checks Supplied as a single piece Suitable for use in inspection and alignment setups FAQ What is the aperture size of the template? The template features a Ø20 mm aperture and is listed under SKU MS905.272 by Peak, suitable as a consistent optical reference. Is the item supplied individually or in sets? The article is supplied as a single piece (einzeln), making it convenient for targeted inspection tasks and easy traceability. For which applications is this template intended? The template is intended for optical checks, calibration routines and alignment tasks within inspection setups and microscopes, providing a repeatable reference point. Does the template require special fixtures to be used? No special fixtures are required; the standard design is intended for simple integration into existing inspection rigs and benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

- Stereokopf mit hochwertiger Optik • Okular Weitfeld 10x • Stativ mit Feineinstellung • Stromversorgung 230 V / 50 HzTechnische Daten- Vergrößerung: 20X + 40X- Zoom: -- Arbeitsabstand: 60mm- Licht: 12 V, 10W