Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Take advantage of the Standard Ø26 mm format and Peak's specialist design to ensure consistent optical alignment and simple integration into existing workflows; its compact format supports efficient storage and handling. Order the template directly via Metav Werkzeuge or speak with our consultants for application advice. Peak templates – Standard optical template, Ø26 mm A Peak template for optical alignment and marking tasks, the standard Ø26 mm stencil provides a compact, consistent gauge for workshop and laboratory use. Standard optical template, Ø26 mm Manufactured by Peak for optical use Suitable for alignment and marking Compact, easy to store Consistent alignment for reproducible results The Ø26 mm standard ensures a repeatable datum for a wide range of optical checks and simple marking operations. By using a uniform aperture size, setups require fewer adjustments and inspection routines become more predictable. The stencil functions as a stable reference in quality control tasks, where repeatability and clear positioning are essential for reliable measurement chains. Faster setups and fewer process interruptions Integration of the standard template into existing fixtures reduces setup time by providing a predefined reference point. The design supports streamlined workflows in optical inspection and assembly processes, leading to measurable gains in operational efficiency. Where speed and consistency are priorities, the stencil contributes to lower cycle times and reduced rework, which benefits production and laboratory environments alike. Practical handling that supports workshop routines The compact format and straightforward form factor make the stencil easy to store and retrieve during routine tasks. Its simple geometry facilitates rapid placement and visual verification without specialised tools. For technicians and quality engineers, the template acts as a convenient aid that helps maintain steady throughput while keeping handling steps minimal and transparent. Suitable contexts and target applications The stencil is aimed at optical technicians, metrology staff and workshop teams who require a reliable reference for alignment, marking and inspection. Typical applications include preliminary positioning, visual checks and quick-reference tasks during assembly or maintenance. The product supports standardised procedures and can be incorporated into existing documentation and inspection plans without major adaptations. Order the Peak Ø26 mm optical template from Metav Werkzeuge for dependable alignment performance — contact Metav Werkzeuge for tailored application advice or to request further technical details via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS905.153 Brand: Peak Designation: Peak templates / Standard, Ø26mm Facts Diameter: 26 mm Type: Standard Category: Optics Special features Standard format for optical use Compact stencil for alignment and marking Suited to workshop and laboratory applications FAQ What is the diameter of the template? The template has a diameter of 26 mm as specified for the standard Ø26 mm design. Which brand produces this optical stencil? This optical stencil is produced by Peak and is listed under SKU MS905.153. What primary tasks is the stencil intended for? The stencil is intended for alignment, marking and quick optical checks in workshop and laboratory environments. Can the stencil be integrated into existing inspection routines? Yes, the standard Ø26 mm format is designed to be compatible with common alignment and inspection procedures, facilitating quick integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

2x Vorsatzlinse (w.d. 26mm)

2x-4x SLX-1 Cordless binocular stereomicroscope

Take advantage of the loupe's combination of 3.3× magnification, lightweight aluminium construction and an anti-fog vent for reliable inspection of small components; order directly via Metav Werkzeuge or consult the sales team for precise specification support. Peak eye loupe A13D — 3.3× magnification, aluminium tube The Peak eye loupe A13D is a compact inspection loupe designed for precise work on watches, jewellery and other small parts Aluminium tube for lightweight durability 3.3× magnification for fine inspection Anti-fog vent prevents lens condensation Accurate inspection for fine components The compact optical design delivers 3.3× magnification with a single-lens configuration, providing a clear, undistorted view for measurement and visual checks. The single lens reduces parallax and produces a sharp image that supports precise visual decisions during assembly or quality control. For bench work and micro-assembly, this loupe helps to identify burrs, surface defects and alignment issues faster, improving inspection reliability and reducing rework. Consistent clarity in varying conditions A small vent in the tube prevents condensation on the lens, so visual clarity is maintained even when temperature or humidity changes occur. Condensation commonly arises from temperature differentials between the operator and the part; the vent equalises the internal air and avoids fogging. This practical detail sustains a steady workflow and minimises interruptions during prolonged inspection cycles, ensuring that the optical performance remains dependable across shifts. Lightweight handling for repetitive tasks Constructed from aluminium, the loupe is both durable and feather-light, easing fatigue during repeated use. The slim tube profile allows close positioning to calipers and other measuring instruments without obstructing the operator’s view. For technicians performing delicate finishing or assembly on watches and jewellery, the combination of low mass and ergonomic form supports extended use with steady control and rapid repositioning. Built for workshop and bench environments The model A13D is tailored for routine workshop inspection tasks where portability and robustness matter. The loupe’s simple, single-lens layout requires minimal maintenance, and the anti-fog feature reduces cleaning cycles. Suitable for use alongside precision calipers and fine-measurement workflows, this inspection tool complements a bench set-up focused on high-quality, repeatable results and consistent visual verification. For guidance on integrating the Peak eye loupe A13D into workshop inspection routines or to request stock details, contact Metav Werkzeuge for specialist advice and reliable supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: MS905.390 Model: A13D Brand: Peak Material: Aluminium Magnification: 3.3× Lens count: 1 Special feature: small vent in tube to prevent lens fogging Facts Magnification: 3.3× Lens count: 1 Special features Aluminium tube for durability and low weight Single-lens design for sharp, low-parallax viewing Anti-fog vent to reduce condensation Suitable for inspection of watches and jewellery Category: Optics FAQ What magnification is provided by this loupe? The loupe delivers 3.3× magnification, supplied as a single-lens optical configuration for clear visual inspection. Is the loupe suitable for watches and jewellery work? Yes, the Peak eye loupe A13D is intended for fine work on watches and jewellery and for use alongside precision calipers during measurement tasks. How does the loupe avoid fogging during use? A small vent in the tube prevents internal condensation, maintaining clear optics even when ambient conditions change. What material is the inspection tube made from? The inspection tube is formed from aluminium, chosen for its combination of lightness and robustness. How should the lens be cleaned to avoid damage? Clean the lens with a soft, lint-free cloth and an appropriate optical cleaner; avoid harsh abrasives and aggressive solvents that could damage the coating. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact probe size, crisp display and extended battery life to carry out fast, reliable inspections in workshop and site environments. Order the inspection device directly from Metav Werkzeuge or consult our technical advisers if additional data is required. Metav IndustryLine Foto‑Video Endoscope — 4.3" colour monitor, 3.9 mm probe The Metav IndustryLine Foto‑Video Endoscope is a handheld inspection camera designed for visual checks in confined areas such as hollow spaces and pipes in automotive and construction applications. 4.3-inch colour LCD, 70° viewing angle 3.9 mm probe with 2 m flexible cable Dimmable white LED illumination SD card slot for photo and video storage IP68-rated cable and 5-hour runtime Fast, reliable inspection where access is limited The inspection camera combines a 3.9 mm probe with a 2 m cable, giving access to narrow bores and deep cavities while maintaining manoeuvrability. This slender probe diameter and flexible lead make the device particularly suitable for quick visual checks of hollow spaces and pipes in automotive and construction contexts, where time and repeatability matter. The tool’s IP68 cable protection ensures resilience against dust and temporary immersion, supporting on-site work in exposed environments without compromising the imaging unit. Clear images and uninterrupted operation for diagnostic tasks Workflows benefit from a 4.3-inch colour LCD (480 x 854 px) paired with a 1920 x 1080 camera sensor in the probe, delivering detailed live images on a compact display. The probe’s dimmable white LEDs allow contrast adjustment in darker cavities, while the SD card slot enables straightforward capture and transfer of photos and videos (SD card not included). Power is provided by a 2600 mAh rechargeable battery, offering approximately 5 hours of runtime for extended inspections and reducing the need for frequent recharging during site shifts. Ready-to-use set that speeds up routine checks The inspection kit arrives with practical attachments — head cap, magnet cap and hook — to increase the range of observable tasks and simplify retrieval or targeted views in awkward positions. At around 0.6 kg, the handheld unit is portable for bench work and site use alike. The combination of a colour monitor, local storage and robust probe assembly makes this inspection camera a pragmatic choice where fast visual verification is required rather than full metrological measurement. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine inspection camera into existing inspection routines or to request a tailored quotation from our Emmerich team Technical data Article number: M503.192 GTIN: 4061905450075 Brand: Metav IndustryLine Facts Probe diameter: 3.9 mm Cable length: 2 m Battery capacity: 2600 mAh Runtime: approx. 5 hours Display: 4.3 inch (480 x 854 px) Camera resolution: 1920 x 1080 px Viewing angle: up to 70° Weight: 0.6 kg IP rating: IP68 (cable) Special features SD card slot for photo/video storage (SD card not included) Dimmable white LEDs on camera probe Accessories included: head cap, magnet cap, hook Suitable for quick visual inspection of hollow spaces and pipes in automotive and construction Colour monitor for immediate image review FAQ What is the probe diameter and cable length of the inspection camera? The probe has a diameter of 3.9 mm and is mounted on a 2 m flexible cable for extended reach. How long does the battery last on a single charge? The internal 2600 mAh battery provides approximately 5 hours of continuous operation under typical conditions. Can images and video be saved directly from the device? Yes. The unit includes an SD card slot for storing photos and videos; an SD card is not included. Is the inspection probe suitable for use in wet or dusty environments? The cable and probe assembly are rated IP68, offering protection against dust ingress and temporary immersion. Which accessories are supplied with the inspection camera? The scope is delivered with a head cap, a magnet cap and a hook to support different inspection scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a stable, heavy-duty base and a generous 300 x 200 mm platform to secure inspection lamps and magnifiers during precision work; the substantial mass minimises vibration and improves visual stability. Order or consult Metav Werkzeuge for tailored advice on integration and accessories. Table stand for magnifying lamp 300 x 200 mm — sturdy workshop base (4.3 kg, Metav IndustryLine) The Table stand for magnifying lamp 300 x 200 mm provides a heavy, vibration-resistant support for inspection and assembly tasks in optics and workshop environments. Heavy steel base, 4.3 kg mass for stability Platform size 300 x 200 mm for larger lamps Designed for workshop and inspection use Compatible with common magnifying lamps Reduced vibration for steadier inspection results A substantial base mass improves the stability of any mounted illumination or magnifier, turning hand-held wobble into steady viewing. The 4.3 kg base dampens micro-movements that would otherwise blur fine detail, which is particularly relevant for tasks that rely on visual precision. This results in fewer retakes and more reliable visual inspections in production or quality-control routines, delivering a measurable boost in process consistency. Large platform to accommodate diverse lamp heads The 300 x 200 mm platform offers room for larger lamp interfaces and provides a stable footprint for diverse magnifier designs. The expanded surface area simplifies alignment and positioning of the lamp head, helping to maintain a consistent working distance and illumination angle. For operators, this means quicker setup times and improved repeatability when switching between components or inspection points. Workshop-ready construction and straightforward integration Built for continuous use in inspection and assembly areas, this table stand comes from the Metav IndustryLine range and is engineered with workshop durability in mind. The robust construction supports frequent handling and repositioning without compromising stability. Compatibility with standard magnifying lamps ensures easy integration into existing workstations, while the product’s optical focus makes it a reliable partner for precision assembly and inspection tasks. Choose the Metav IndustryLine table stand when rigidity and repeatable inspection conditions are required; contact Metav Werkzeuge for product guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: M503.165.1 GTIN: 4054469164588 ECLASS: 27110390 Core data Weight: 4.3 kg Platform size: 300 x 200 mm Packaging dimensions: 275 x 185 Special features Category: Optik Label: Table stand for magnifying lamp, > 2 kg Designed for workshop and inspection use Compatible with common magnifying lamps and inspection setups Suitable for integration with related accessories (see product family) FAQ What load does the stand support? The table stand’s specification indicates suitability for loads above 2 kg and the item weight of 4.3 kg gives a stable base for typical inspection lamps. Is the stand suitable for larger magnifier heads? Yes. The 300 x 200 mm platform offers sufficient surface area to support larger lamp heads and facilitates precise positioning. Can the stand be used in a production environment? The robust construction and workshop-oriented design make this stand appropriate for repeated use in production and quality-inspection settings. Does the stand come with mounting hardware? The product is supplied as a ready stand; specific mounting hardware depends on the lamp model and should be checked against the lamp manufacturer’s specifications. Which product family does this belong to? This stand is part of the Metav IndustryLine offerings and is designed to integrate with common inspection and magnifying lamp systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of energy-efficient 14.5 W LED output, dimmable control and 300+300 mm articulated reach for precise, adaptable task lighting; order the unit directly via Metav Werkzeuge or consult the advisors for application support. M503.168 LED Work Light — Clamp-mounted, dimmable (Metav IndustryLine) The M503.168 is a clamp-mounted LED work light designed for inspection benches and assembly stations, offering flexible positioning and consistent cool-white illumination for detail-critical tasks. 1000 lm luminous output 90 SMD LEDs for even illumination Dimmable control for task adjustment 300+300 mm articulated arms Clear, task-focused illumination that improves inspection results The light unit delivers 1000 lm from 90 SMD LEDs at a rated 14.5 W, producing a crisp 6000–7000 K cool-white beam that supports high-contrast inspection and fine assembly. The dimmable function permits precise adjustment of light intensity to match material surfaces and magnification levels, reducing glare and helping to reveal defects without overheating the workpiece. By converting electrical input into uniform output efficiently, the lamp combines high luminous efficacy with low running power, making it suitable for continuous use on inspection benches and optical workstations. Flexible mounting and stability for repeatable positioning A table clamp base and a pair of 300 mm articulated arms (300+300) create a compact but highly adjustable support that holds position reliably during repetitive tasks. The articulated geometry and the overall reach of 400 mm allow the lamp head to be placed close to the work area or moved away for general illumination, while the solid mounting prevents unintended drift. The relatively robust mass contributes to positional stability, supporting reproducible lighting conditions that benefit quality control and measurement routines where consistent illumination is essential. Built for workshop environments with long service life Designed for practical workshop use, the luminaire offers an estimated service life of approximately 20,000 hours, utilising modern SMD LED technology that resists lumen depreciation under normal operating conditions. Rated for standard mains supply 220–240 V / 50 Hz, the unit integrates reliably into European electrical environments and keeps maintenance requirements low. The combination of extended life and low power consumption supports continuous operation in busy industrial settings while limiting downtime for lamp replacement. Integration advantages and ergonomic benefits at the bench The clamp-mounted format is optimised for benches, inspection tables and assembly islands where floor space is limited and rapid positional changes are required. The lamp’s dimmable control supports a range of tasks from coarse assembly to delicate visual inspection, and the even output from the 90 SMD LEDs reduces shadowing across small components. As part of a workstation setup, the device improves both visual comfort and task efficiency, contributing to faster decision-making in quality checks and reducing the likelihood of rework due to unseen defects. The unit is presented as a practical, energy-conscious choice for workshops seeking a balance of performance and operational economy. For application-specific advice or a tailored quotation for the Metav IndustryLine M503.168 LED work light, contact Metav Werkzeuge by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com — specialists are available to assist with integration and compatibility queries Technical Data Article number: M503.168 GTIN: 4054469164618 Manufacturer: Metav IndustryLine Category: Optik Facts Luminous flux: 1000 lm Power: 14.5 W LEDs: 90 SMD LEDs Light temperature: 6000–7000 K Arms: 300 mm + 300 mm Total length: 400 mm Weight: 6.6 kg Service life: approx. 20,000 h Supply voltage: 220–240 V / 50 Hz eClass: 27110640 Customs tariff number: 94054099900 Special features Dimmable light output Table clamp base Even illumination for inspection tasks Energy-efficient SMD LED technology Designed for optical and assembly benches FAQ What light output can be expected from the lamp? The M503.168 provides 1000 lm from its 90 SMD LEDs, delivering high-intensity illumination suitable for inspection and assembly tasks. Is the lamp intensity adjustable for different tasks? Yes, the unit features a dimmable control that allows incremental adjustment of brightness to suit both fine inspection and general lighting requirements. How is the lamp mounted and positioned? The work light is supplied with a table clamp and two articulated arms (300+300 mm) that permit secure clamping to benches and flexible positioning over the work area. What is the expected service life of the LEDs? The SMD LED package is rated at approximately 20,000 hours, providing long-term operation with reduced maintenance intervals. Is the product suitable for continuous use in a workshop environment? Yes; the lamp operates on 220–240 V / 50 Hz mains and is engineered for continuous workshop use, combining low power consumption with durable LED technology. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Peak Measuring Loupe — Precision Measuring Loupe The Peak Measuring Loupe is a compact measuring loupe for accurate inspection and dimensional checks in workshops, quality control and hobby applications. 10x Magnification for precise inspection Achromatic Lenses minimise optical aberrations Large 35 mm Field of View for easy reading Measuring Range 0–30 mm with 0.1 mm scale Lightweight 74 g with protective case included Exceptional optical accuracy for reliable measurements The Peak Measuring Loupe combines Achromatic Lenses with a finely engraved 0.1 mm scale to deliver measurement results you can trust. Achromatic optics correct colour fringing and reduce distortion, so edges and graduations appear sharp across the whole 35 mm Field of View. This leads to faster readings and fewer rechecks, which is especially valuable in inspection routines where consistency matters. The integrated Standard Template supports quick comparisons and repeatable measurements. Compact design that suits workshop and field use Designed for mobility, the instrument fits comfortably in a pocket or tool kit while weighing just 74 g. Its Ø46 x 44 mm housing gives a stable grip and a wide viewing area, allowing users to position the loupe quickly over parts or print. The included Protective Case keeps optics safe during transport and storage, extending service life and preserving calibration. These features make the loupe a practical choice for on-site inspections as well as bench-top tasks. Clear benefit for specialists and hobbyists Whether used by jewelers, watchmakers, engineers or quality inspectors, this measuring loupe brings microscopic detail into practical reach. The 10x Magnification reveals fine contours and marking clarity while the precise measuring system removes guesswork from small-dimension checks. For non-experts, the loupe shortens the learning curve: visible graduations and a large field reduce user error and speed up familiarisation. How the measuring system supports accurate decision-making The marking system with a Measuring Range 0–30 mm allows direct reading of dimensions with 0.1 mm resolution; measurements are taken by aligning the object with the engraved scale and reading across the Field of View. For customers unfamiliar with optical terms, Achromatic Lenses mean less colour dispersion and improved edge contrast, translating into measurements that are easier to interpret. The solid construction and defined scale provide reproducible results under routine inspection conditions. Choose the Peak Measuring Loupe for dependable precision — contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com, call +49 2822 7131930 or reach out via WhatsApp +49 170 2837271 Technical information Bezeichnung: Peak Messlupe Brand: Peak SKU: MS905.180 Label: Peak Messlupe 10x Magnification: 10x Lens: Achromatic Field of View: Ø35 mm Scale Division: 0,1 mm Measuring Range: 0–30 mm Dimensions: Ø46 x 44 mm Mass: 74 g Includes Standard Template: Yes Protective Case included: Yes UID: MS905.180 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What measuring capability does the Peak Measuring Loupe (Peak, measuring loupe) offer? The Peak Measuring Loupe from Peak is equipped with 10x Magnification and a measuring range of 0–30 mm with a 0.1 mm scale, enabling fine dimensional checks and clear visual inspection for small parts. Is the Peak Measuring Loupe (Peak, measuring loupe) suitable for field inspections? Yes, the Peak Measuring Loupe is lightweight (74 g) and supplied with a Protective Case, making it suitable for on-site use in workshops, maintenance rounds or mobile quality control. How do Achromatic Lenses improve results with the Peak Measuring Loupe (Peak, measuring loupe)? Achromatic Lenses in the Peak Measuring Loupe reduce colour fringing and optical aberrations, which enhances edge contrast and makes scale readings more reliable and quicker to interpret. Can non-specialists use the Peak Measuring Loupe (Peak, measuring loupe) effectively? Absolutely. The clear 35 mm Field of View, defined 0.1 mm graduations and included Standard Template help users with limited experience achieve reproducible measurements after short familiarisation. Who can advise if I need further technical details about the Peak Measuring Loupe (Peak, measuring loupe)? METAV Werkzeuge provides competent consultation for technical questions or complex requirements — email info@metav-werkzeuge.com, telephone +49 2822 7131930, or WhatsApp +49 170 2837271

Take advantage of high magnification and a compact Ø30 mm barrel for precise component inspection; the combination of 30x optical power and a 9 mm field of view delivers detailed imagery with practical handling. Order directly via Metav Werkzeuge or consult the Metav team for compatibility advice. SWH30X eyepiece – 30x magnification, Ø30 barrel (Metav IndustryLine) The SWH30X eyepiece boosts stereo-microscope magnification to 30x, providing a compact ocular for detailed visual inspection across workshops and laboratories 30x magnification for fine detail Ø30 mm barrel for standard ports 9 mm field of view for focused clarity Lightweight 0.5 kg for easy handling Precision magnification for detailed inspection This eyepiece delivers 30x magnification, tailored for tasks that require close visual analysis. High magnification increases the apparent size of small features, enabling clearer assessment of micro‑solder joints, surface defects and fine contours. The optical specification translates directly into faster fault detection and more reliable quality checks, because details that are invisible at lower powers become distinguishable. The design supports repeatable observation, so measured visual findings can be documented with confidence. Compact barrel and controlled field of view for practical use The Ø30 mm barrel fits standard stereo‑microscope ports, making integration straightforward in most optical rigs. The 9 mm field of view is sized to balance detail and context: large enough to orient on the component, yet narrow enough to concentrate on the area of interest without excessive repositioning. At a weight of 0.5 kg, the ocular remains manageable during bench work or when used in modular inspection stations, reducing operator fatigue and easing installation into existing inspection chains. Optical clarity and handling that support workflow efficiency Engineered for sharp imaging, the eyepiece emphasises contrast and resolution within its specified field. The compact ocular form reduces stray light and helps preserve depth perception in stereo setups, which is beneficial when handling small assemblies or performing precision alignment. Robust mechanical tolerances ensure that the optical axis remains stable during routine use, so inspections stay consistent over time rather than drifting with frequent adjustments. Measurable benefits for quality assurance The combination of defined optical values and a standard barrel diameter yields quantifiable improvements in inspection throughput: higher magnification leads to fewer iterative checks, and the standard mount reduces setup time across multiple workstations. For procurement and process planning, the clear technical parameters mean predictable integration into measurement routines and documentation systems, supporting traceable quality control in production and laboratory environments. Contact Metav Werkzeuge for compatibility checks or to request application advice regarding the SWH30X eyepiece and integration into existing inspection setups Technical data Article number: M503.241.4 GTIN: 4054469145150 Manufacturer: Metav IndustryLine Category: Optik Facts Magnification: 30x Field of view: 9 mm Barrel diameter: Ø30 mm Weight: 0.5 kg Tariff number: 90119090 Special features Typ: SWH30X Designation: Okular Suitable for stereo microscopes Thumbnail available: m5032411-main.jpg FAQ What magnification does this eyepiece provide? The SWH30X eyepiece from Metav IndustryLine provides 30x magnification, suitable for detailed visual inspections. Which microscope ports are compatible with the ocular? The eyepiece uses a Ø30 mm barrel, which fits standard stereo‑microscope ports and facilitates quick integration. What field of view can be expected during inspection? An approximate 9 mm field of view is provided, giving a balance between detail and situational awareness for component inspection. Is the eyepiece suitable for laboratory and workshop use? Yes; the SWH30X ocular is designed for practical use in both workshop and laboratory environments where higher magnification and reliable handling are required (SKU: M503.241.4). How does the eyepiece support quality control processes? Defined optical specifications (magnification, field of view, barrel size) enable consistent inspection routines and predictable integration into existing quality workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 30× magnification, a 0–5 mm measuring range and a 0.05 mm scale to speed up routine inspections and reduce measurement uncertainty; order the item directly via Metav Werkzeuge or contact our consultants for specification matching. Peak Measuring Loupe MS905.285 — portable optical inspection instrument with precision scale The Peak Measuring Loupe MS905.285 is a compact optical inspection tool for precise visual measurement and quick dimensional checks in workshop and quality-control settings *Peak measuring loupe with 30× magnification *Measuring range 0–5 mm with 0.05 mm scale *Ø7 mm view field for small features *Compact Ø30×19 mm housing for bench use Rapid, accurate readings for small features The instrument offers 30× magnification, enabling fast detection of details that are otherwise difficult to see with the unaided eye. The integrated 0.05 mm scale allows for direct reading of fine dimensions within the 0–5 mm measuring range, which accelerates routine checks and reduces the need for auxiliary measuring steps. For operators who carry out frequent inspections, this translates into fewer handling steps and a more efficient workflow without sacrificing accuracy. Practical design for bench and portable use Designed with a compact housing Ø30×19 mm, the loupe fits easily on a bench or in a kit bag for on-site visual inspection. The Ø7 mm view field concentrates the inspection area, making it easier to compare small features and blemishes under consistent magnification. The compact form factor supports ergonomic handling during repeated checks and helps integrate the device into established inspection routines without requiring additional fixtures. Integrating the loupe into inspection procedures The optical unit is suitable for quick verification and routine precision checks where direct visual measurement is sufficient. By combining enhanced magnification with an easily legible 0.05 mm scale, the device supports rapid decision-making during quality control and small-part assembly. For traceability in routine use, measurements can be recorded alongside other inspection data as part of standard process documentation to ensure consistent results across shifts. Discuss how the Peak MS905.285 measuring loupe matches inspection requirements with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice Technical Data Article number: MS905.285 Manufacturer: Peak Product name: Peak Measuring Loupe Facts Magnification: 30× Scale division: 0.05 mm Measuring range: 0–5 mm View field: Ø7 mm Dimensions: Ø30×19 mm Special features Category: Optics SKU: MS905.285 Image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/7e/30/d0/67/67d0307e42f0750198b460b5/MS905285-main.jpg FAQ How fine is the scale on the measuring loupe? The Peak measuring loupe MS905.285 features a 0.05 mm scale division suitable for fine comparative measurements within its 0–5 mm range. What magnification does the instrument provide? The device delivers 30× magnification, which enlarges small details for inspection; the view field is Ø7 mm for concentrated observation. Which inspection tasks is this loupe best suited for? The loupe is well suited to quick visual inspection and small-part measurement workflows in workshop, electronics and jewellery-related checks where a compact optical measuring tool is advantageous. Can fine features be measured reliably with this unit? With the 0.05 mm scale and focused Ø7 mm view, MS905.285 supports reliable, rapid readings for routine precision checks rather thanreplace high-end laboratory metrology equipment. Is a product image available for reference? An image is provided in the product listing; refer to the product assets for a visual overview of MS905.285 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency detected: the product magnification is listed as both 2× and 4× in the supplied information, which creates confusion and prevents the accurate generation of a full and reliable product description; therefore, it is essential to review and correct the magnification data to ensure that the product details are consistent, clear, and accurate for potential customers or users who rely on this information to make informed decisions about the product, as discrepancies like this can lead to misunderstandings or incorrect assumptions about the product's features, ultimately impacting customer satisfaction and trust in the provided details.

Benefit from precise 10× magnification, a 33 mm viewing field and a hardened lens for consistent detail checks; order the M503.126 inspection loupe directly via Metav Werkzeuge or consult our advisors for application advice. M503.126 Inspection Loupe — 10× magnification, 33 mm viewing field (Metav IndustryLine) M503.126 inspection loupe is a compact handheld optical aid designed for close visual inspection in workshops, quality control and precision craft applications. 10× magnification for fine inspection 33 mm viewing field for clear context Lightweight 0.1 kg housing for portability Hardened lens for improved scratch resistance Inspect small details with industrial clarity The loupe delivers 10× magnification, enabling clear visualisation of fine edges, solder joints and surface defects that standard magnifiers can miss. The combination of a treated, hardened lens and a generous 33 mm viewing field means a larger area can be scanned without frequent repositioning, which speeds up repetitive checks on components. For electronics inspection, jewellery appraisal or fine mechanical work, the optical setup reduces the need for additional lighting by increasing apparent contrast, improving defect detection rates and supporting faster decision-making on the shop floor. Portable design that supports fast, repeatable checks With its lightweight plastic housing and compact footprint (29 × Ø43 mm), the loupe is easy to carry to benches or into production cells. The modest 0.1 kg mass minimises hand fatigue during extended use, while the rigid housing keeps the optics aligned for repeatable observations. This stability assists in maintaining consistent inspection results across multiple operators and shifts, contributing to efficient quality control routines and fewer ambiguous measurements during visual appraisal. Built for practical workshop use and quick handling The optical aid is built for everyday handling: durable materials, a treated lens and a viewing field sized to balance magnification with context. The model is particularly suited to small-batch inspection, repair stations and mobile quality checks where an unobtrusive, reliable loupe is preferable to larger bench microscopes. The compact dimensions allow close access to constrained areas, such as PCB components or micro-mechanical parts, where clarity and reach are both required. Trusted partner for precision tasks As part of the Metav IndustryLine, this loupe benefits from a supplier network emphasising consistent quality and availability. The compact optical instrument supports workflows that demand quick visual verification without the overhead of complex measuring equipment, making it a pragmatic choice for shops that value dependable tools and straightforward maintenance. The combination of durable optics and portable design helps bridge bench inspection and on-the-go checks with the same reliable visual performance. For tailored advice on whether the M503.126 suits specific inspection tasks, or to place an order via Metav Werkzeuge, call +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants in Emmerich will be pleased to assist. Technical data Article number: M503.126 Label: Messlupe, 10X, 43 x 29 mm Betrachtungsfeld 33 mm GTIN: 4054469144597 Facts Magnification: 10× Dioptre: 10 Viewing field: 33 mm Dimensions: 29 x Ø43 mm Weight: 0.1 kg Measuring range: 0–33 mm Tariff number: 90138090 Special features Housing: plastic Lens treatment: hardened/coated Category: Optik eClass: 21170343 Main image available FAQ What level of detail can be seen with this loupe? The M503.126 inspection loupe offers 10× magnification, which is suitable for detailed visual checks such as solder-joint inspection, fine surface evaluation and small-part appraisal in workshop environments. Is the lens durable enough for daily workshop use? Yes, the loupe features a hardened/coated lens that improves scratch resistance and maintains image clarity under frequent handling, making it appropriate for routine industrial inspection. Can the loupe be used for electronics and jewellery inspection? The optical and dimensional characteristics of the M503.126 make it well suited to both electronics and jewellery tasks, providing a balance between magnification and a 33 mm viewing field for contextual inspection. How portable is the device for mobile inspections? At 0.1 kg and with compact dimensions, the instrument is designed for portability and low operator fatigue during mobile or bench-top inspections. Does this model include any certification or traceable numbering? The product data lists the GTIN and SKU for traceability; specific calibration or certification details are not indicated for this optical loupe in the supplied data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine consistent precision, a compact Ø35 mm format and standard No. 4 compatibility for reliable optical layout work. Order the product directly via Metav Werkzeuge or consult our specialists for application advice. Peak templates — No. 4 optical template, Ø35 mm The Peak templates No. 4 (Ø35 mm) serve as a compact optical stencil for aperture definition and positioning tasks in optical workshops and quality control stations. No. 4 optical template Ø35 mm Compact format for tight assemblies Suits optical positioning tasks Made by Peak for optics applications Repeatable precision for optical layout and inspection The compact Ø35 mm aperture of this stencil supports consistent marking and alignment in repetitive tasks, promoting measurable repeatability during production and inspection. As a standard No. 4 format, the template reduces setup variation and shortens alignment time, which increases throughput in small-batch optical assembly. The clear, defined aperture ensures that measurements and cut-outs are comparable across batches, making the tool a practical choice for calibration benches and optical fixtures where uniformity is required. Seamless integration into workshop processes Designed for straightforward incorporation into existing workflows, this optical stencil helps to accelerate routine operations without complex adjustments. The compact format is suitable for use in confined assembly areas or alongside microscopes and precision measuring equipment, supporting efficient handling and positioning. By simplifying the marking and alignment phase, the template contributes to shorter process cycles and fewer reworks, delivering a direct operational benefit in line with rational cost-efficiency goals. Confidence in supply and practical identification Procured through Metav Werkzeuge, the stencil benefits from a transparent supply chain and dependable availability for industrial users and specialist retailers. The clear designation as No. 4 and the visible Ø35 mm marking make storage and retrieval faster, reducing time lost searching for the correct template. Metav’s role as an experienced precision partner ensures that demand can be met reliably from stock in Emmerich, which supports uninterrupted production and planning security. For ordering or technical clarification regarding the Peak templates (No. 4, Ø35 mm) please contact Metav Werkzeuge GmbH in Emmerich or consult our technical advisers at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: MS905.185 Manufacturer: Peak Designation: Peak templates / No. 4 Ø35 mm Category: Optics Facts Diameter: 35 mm Special features No. 4 format Optical stencil for positioning and aperture work Product image available (see assets) FAQ What is the diameter of the template? The Peak templates No. 4 (SKU MS905.185) feature a diameter of 35 mm for aperture and alignment tasks. What applications are suitable for this stencil? The stencil is intended for optical positioning, aperture definition and related layout work in workshops and quality control environments where consistent marking is required. Is the product image available for inspection? An image is available for the Peak templates (MS905.185) to assist with visual verification before ordering. How does this format help in an industrial workflow? The No. 4, Ø35 mm format reduces setup variation and supports faster identification and changeover in assembly and inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Efficient optical alignment and consistent repeatability thanks to a compact Ø35 mm format; ideal for inspection jigs and template marking. Benefit from straightforward identification with the No. 1 designation and request further advice or ordering via Metav Werkzeuge for smooth procurement. Peak template No. 1 — optical template, Ø35 mm A Peak template No. 1, Ø35 mm designed for precise positioning and marking tasks in optical inspection and alignment applications. Peak template No. 1, Ø35 mm Precision for optical alignment Compact for easy storage Faster, repeatable alignment for optical workflows This Ø35 mm template provides a clear, standardised reference for positioning components and aligning optical assemblies. By offering a consistent datum point, the device reduces variability during setup and contributes to faster, more reliable measurement and inspection cycles. The compact format supports tight workspaces while maintaining precision and repeatability required in labs and production benches. Clear identification and simple integration into fixtures Marked as No. 1, the template is intended for straightforward identification within a set of reference tools and jigs. The simple designation aids inventory control and process documentation, enabling shops and quality departments to index gauges or templates at a glance. Integration into existing fixtures is simplified by the standardised Ø35 mm dimension, which is commonly accommodated in optical carriers and positioning plates. Practical handling and visual verification With a dedicated product image available, visual checks are quick and unambiguous during incoming inspection or tool selection. The design focuses on usability: compact storage, rapid retrieval, and clear labelling minimise handling time on the workshop floor. For projects that require repeatable marking or a compact datum reference, this template supports reliable, low-effort operation across inspection, assembly and test stations. Contact Metav Werkzeuge to discuss how the Peak template No. 1 (MS905.182) can be integrated into existing optical setups or to request tailored advice from our consultants at Metav Werkzeuge Technical data Article number: MS905.182 Designation: No. 1, Ø35 mm Brand: Peak Facts Diameter: 35 mm Special features Category: Optics Image available (thumbnail and main asset) SKU: MS905.182 FAQ What is the nominal diameter of this template? The Peak template No. 1 (MS905.182) has a nominal diameter of 35 mm, specified as Ø35 mm for consistent reference across optical applications. How is the product identified in stock and documentation? Identification is by the designation "No. 1, Ø35 mm" and the article number MS905.182, which should be quoted when ordering or referencing the template. Is a visual reference available to verify the item before use? Yes, the product listing includes an image (thumbnail and main asset) that shows the template for quick visual verification during selection. For which applications is this template intended? Categorised under optics, the template is intended as a compact datum and marking aid for optical inspection, alignment and fixture tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, purpose-made optical stencil that delivers consistent marking and repeatable positioning; the Ø35 mm aperture and clear identification make workshop layout faster and more reliable — order the Peak template directly via Metav Werkzeuge or consult our advisors for selection guidance. Peak Template No. 3 (Ø35 mm) — Optical layout template A compact Peak Template No. 3 (Ø35 mm) designed for accurate optical marking and straightforward positioning in inspection and instrument workshops. Ø35 mm aperture template Designed for optical layout tasks Compact format for easy storage Clear article identification MS905.184 Faster setup and repeatable positioning for optical assemblies The compact stencil with a Ø35 mm aperture streamlines routine layout operations by providing a fixed reference for hole marking and component alignment. Where repeatability matters, a dedicated optical template removes measurement guesswork, reducing setup time and the risk of misalignment. The clear labelling and standardised opening support efficient workflows in small-batch production, calibration benches and service benches, delivering measurable improvements in process stability and throughput. Clear identification and simple inventory handling Marked with the article code and model, this template simplifies stock management and traceability on the shop floor. The visible identification reduces downtime caused by searching for the correct gauge and supports consistent use across teams. For procurement and workshop managers, the combination of compact dimensions and unambiguous labelling contributes to a tidy work environment and predictable logistics when integrating tooling into existing setups. Practical benefits for optical and inspection work In inspection and optical instrument tasks, a purpose-made stencil ensures that repeated cut-outs, mountings or aperture checks happen in the same place every time. The template supports precise alignment procedures and helps to standardise assembly tolerances without reliance on complex measuring equipment. When paired with routine calibration practices, the stencil becomes a simple but effective tool for maintaining precision and reducing rework. Compatible with common workshop processes and easy handling The straightforward design permits quick application in layout, marking and visual inspection processes. Its compact profile enables storage alongside other optical accessories and standard gauges, contributing to a clutter-free bench. While simple in concept, the stencil delivers practical gains in consistency and speed, particularly where a reliable, repeatable aperture reference is required during assembly, inspection or small-scale manufacture. For assured optical layout results and procurement support, contact Metav Werkzeuge to discuss the Peak Template No. 3 (MS905.184) and confirm suitability for existing workshop procedures. Technical Data Article number: MS905.184 Model: Nr. 3 Diameter: 35 mm Category: Optik Brand: Peak Facts Ø35 mm SKU MS905.184 Category: Optik Special features Template for optical layout Compact format Visible article identification Intended for marking and alignment FAQ What is the aperture size of this template? The template features a Ø35 mm aperture suitable for standard optical layout and marking tasks with the Peak Template No. 3. For which applications is the stencil intended? The stencil is intended for optical layout, marking and alignment work in instrument workshops and inspection tasks where a repeatable aperture reference is required. Is the template suitable for high-volume production use? Yes, the Peak Template No. 3 is designed to support repeatability and efficient setup; suitability for high-volume environments depends on process integration and handling routines. How is the item identified for stock and traceability? The item is clearly labelled with its article number MS905.184 and model information to aid inventory management and traceability on the shop floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact optical guide that delivers consistent, repeatable markings: the combination of Ø35 mm sizing and a purpose-made stencil speeds routine tracing while maintaining precision. Order via Metav Werkzeuge or consult our specialists for integration into optical workflows. Peak templates — No. 5 Ø35 mm optical stencil A practical Peak optical template designed as a tracing and marking guide for lens and frame work, the No. 5 Ø35 mm stencil supports precise layout tasks in the optics workshop. Optical template Nr. 5 Ø35 mm Suitable for optical measurements Compact tracing and marking guide Peak quality for routine workshop use Precision where routine meets repeatability The Ø35 mm guide offers a consistent reference for repetitive tracing and marking tasks common in optical workshops. Manufactured to a defined diameter, the stencil reduces variability between individual markings, which improves repeatability in production and lowers rework rates. By using a standardized template rather than freehand tracing, operators benefit from faster setup times and fewer alignment checks, translating into measurable time savings across batches of frames or lenses. Integrates into existing optical processes with ease This stencil fits naturally into established optics workflows, acting as a simple yet effective tool for layout, cutting guides or quality checks. The design supports quick placement and removal, enabling technicians to maintain throughput without complex fixtures. When combined with basic measuring equipment, the template complements digital or analogue procedures, providing a tactile reference that helps reduce downstream adjustments and ensures consistent component matching. Clear usage and compatibility for varied tasks As an optical accessory, the stencil is suitable for tasks that require a defined 35 mm diameter reference. It is useful for lens tracing, template comparison and marking consistent reference points on lenses or frames. The straightforward function avoids complicated set-up: align the stencil, mark the perimeter and proceed with subsequent processing. For shops assessing compatibility with existing jigs or holders, the simple footprint makes integration a low-friction option. Built for workshop reliability and supply certainty Sourced from a recognised optics supplier and distributed through an established precision partner, the stencil benefits from reliable availability and quality control. The pragmatic design principle—clear dimensions and a single, repeatable function—matches the need for durable, easy-to-replace tools in busy environments. Procuring via Metav ensures predictable fulfilment and access to a broad range of complementary consumables and measuring aids. For ordering or tailored advice on integrating the Peak No. 5 Ø35 mm template into workshop routines, please contact Metav Werkzeuge for technical consultation and reliable supply from our Emmerich hub. Technical Data Article number: MS905.186 Name: Peak Schablonen Designation: Nr. 5, Ø35mm Facts Diameter: 35 mm Type: Nr. 5 SKU: MS905.186 Special features Category: Optik Brand: Peak Intended use: tracing and marking guide FAQ What is the primary use of this stencil? The stencil serves as a tracing and marking guide in optical tasks; the Peak No. 5 Ø35 mm template provides a fixed-diameter reference for consistent layout work. Is the Ø35 mm size suitable for lens tracing? Yes, the Ø35 mm dimension is a standard reference for many marking and tracing procedures in optics and is suitable for consistent repeatability. How is the item identified for ordering? Order by SKU MS905.186 or by the designation Peak Schablonen Nr. 5, Ø35mm to ensure the correct template is supplied. Can this template be used alongside measuring instruments? The stencil is intended as a manual reference that complements both analogue and digital measuring tools by providing a repeatable physical guide. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a standard No. 10 format combined with a precise Ø35 mm aperture for consistent optical alignment and repeatable marking. The compact template from Peak supports efficient setup and reliable process control — order directly via Metav Werkzeuge or consult our specialists for application advice. Peak template – No. 10, Ø35 mm (MS905.191) Peak template No. 10, Ø35 mm is a compact optical template designed for alignment and marking tasks in optics and inspection workflows Precision Ø35 mm optical aperture Standard No. 10 template format Peak brand quality and traceability Faster setup and reproducible alignment for optics tasks The standard No. 10 format and the Ø35 mm aperture deliver a clear, repeatable reference that reduces setup time and minimises variation between runs. As a fixed-format optical template, it enables consistent positioning when marking or checking components, which improves throughput and lowers the likelihood of rework. The combination of a standardised opening and a compact design supports rapid integration into existing fixtures or inspection jigs, so process reliability increases without additional adjustments. Consistent quality control and easier inspection routines Using a dedicated optical template ensures that dimensional checks and visual inspections follow the same reference each time. The template’s defined aperture supports repeatability in manual and semi-automated inspection steps, helping maintain traceable results across batches. This leads to fewer measurement discrepancies during quality control and supports compliance with internal inspection procedures, making comparisons and documentation straightforward. Simple incorporation into measurement and marking workflows The template is suitable for incorporation in a range of optical and measurement setups within workshops and production lines. Its compact format allows placement on stages, fixtures or alongside gauges without occupying excessive space. Where quick alignment is required for marking, microscopy or camera-based inspection, the template functions as a reliable physical reference, reducing alignment iterations and improving operator confidence during routine tasks. Clear specifications that simplify procurement and stocking With the designation No. 10, Ø35 mm and the article code MS905.191, the template is easy to identify and reorder for spare-part stocking or repeat purchases. The clear categorisation under optics streamlines selection for purchasing teams and reduces procurement time for replacements or additions. Choosing a standardised template supports a lean inventory approach while ensuring compatible references are always available for production and lab environments. For advice on selecting the correct optical template or to secure a reliable supply of Peak No. 10 (Ø35 mm) templates, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and prompt delivery Technical data Article number: MS905.191 Name: Peak template Designation: Nr. 10, Ø35mm Category: Optik Facts Diameter: 35 mm Special features Brand: Peak SKU: MS905.191 Category tag: Optik Designation_2: Nr. 10, Ø35mm FAQ What is the primary use of this template? The template is intended as an optical reference for alignment and marking tasks; the Peak template No. 10 (MS905.191) provides a defined Ø35 mm aperture for repeatable positioning and inspection. Is the Ø35 mm aperture compatible with camera-based inspection systems? Yes, the Ø35 mm opening is suitable as a visual reference in camera or microscope-assisted inspections, supporting consistent alignment in optical workflows. Can the template be used as a mask for marking processes? The template functions as a physical mask or positioning aid in marking and layout tasks, helping to ensure repeatable placement during manual or semi-automated operations. How is the product identified for reordering? Order or reference the item by its article number MS905.191 or by the designation No. 10, Ø35 mm to ensure the correct optical template is supplied. Does this template suit production and laboratory environments? The compact No. 10 format is appropriate for both workshop production and laboratory inspection settings where a standardised optical reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of reliable precision, compact format and standardised geometry for repeatable optical referencing; order the Peak template No. 11 (MS905.192) directly via Metav Werkzeuge or ask the consultants for tailored advice. Peak template No. 11 – Ø35 mm optical template A Peak template No. 11 designed for precise positioning and repeatable layout tasks in optical inspection and measurement environments. Diameter Ø35 mm for standardised references Designation No. 11 — consistent template geometry Intended for optical inspection and layout tasks Consistent reference points for precise optical work Templates with a defined diameter and layout provide a clear baseline for repeatable measurements. The Ø35 mm reference of this template ensures that small optics and components have a uniform datum for alignment, aiding repeatability across production batches. By relying on a fixed template geometry, measurement steps become more straightforward and less prone to human variation, which supports efficient inspection routines and reduces setup time in the workshop. Streamlined handling in inspection and assembly workflows Integration of a compact, standardised template into an inspection bench or assembly station simplifies process design. The No. 11 designation establishes a common naming convention that technicians and engineers can reference in procedures and work instructions, improving traceability in quality checks. Where optical alignment and layout are critical, the clear geometry of the template supports faster visual checks and the application of measurement aids such as microscopes or comparator stages, facilitating a smoother production flow. Practical advantages for labs and small production runs A small-format optical template like this one is particularly useful where bench space is limited but precision is required. It allows technicians to create repeatable setups without complex fixturing, delivering a pragmatic balance between accuracy and convenience. Paired with a consistent procurement and supply approach from a specialist dealer, such templates contribute to reliable day-to-day operations in calibration labs and small-scale manufacturing environments. Contact Metav Werkzeuge GmbH for procurement of the Peak template No. 11 (MS905.192) or for technical consultation: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: MS905.192 Brand: Peak Designation: Nr. 11, Ø35 mm Category: Optik Facts Diameter: 35 mm Type: Nr. 11 Image file size: 558506 bytes Special features Asset filename: MS905192-main.jpg Image URL: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/87/2e/d0/67/67d02e8737a8aad2184c4cf2/MS905192-main.jpg Category path: Optik SKU: MS905.192 Secondary designation: Nr. 11, Ø35mm FAQ What is the primary use of this template? The Peak template No. 11 (MS905.192) is intended as a compact reference for optical inspection and layout tasks, providing a standardised diameter for positioning and visual checks. What size is the template and how is it designated? The template has a diameter of 35 mm and carries the designation No. 11, which identifies its geometry and use within standardised workflows. Can the template be used with microscope inspection setups? Yes, the geometry of the No. 11 template is suitable for integration into bench-top inspection arrangements and works alongside microscopes and comparator stages for visual alignment. How does the template support repeatability in production? By offering a fixed, repeatable reference point (Ø35 mm) the template reduces variability in manual alignment tasks and helps maintain consistent checks across multiple components and production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precise Ø35 mm aperture template and the clear catalogue reference to streamline optical marking and inspection tasks; order directly via Metav Werkzeuge or contact the technical team for application advice. Peak templates Nr. 12 Ø35 mm – Optical aperture stencil The Peak templates Nr. 12 is an optical aperture stencil for precise marking and verification of 35 mm diameters in workshop and laboratory settings. For Ø35 mm optical apertures Catalogue reference MS905.193 Designed for precise marking Compact optical stencil Nr. 12 Accurate aperture control for optical tasks The Ø35 mm specification provides a clear, repeatable datum for aperture marking and verification, supporting precision work in optics and related assembly operations. The stencil reduces alignment time by offering a predefined contour for both marking and visual inspection, which in turn minimises rework and scrap. As a compact optical tool, the Ø35 mm aperture enables consistent positioning when used with jigs or fixture plates, so measurement procedures can be standardised across batches. The visible reference and fixed diameter help to ensure compliance with drawing requirements during incoming inspection or small-series production. Seamless integration into workshop and lab workflows Designed as a straightforward aid for optical setups, the template fits into existing process steps without complex adaptation. The clear designation MS905.193 and the type Nr. 12 simplify inventory management and ordering, accelerating replenishment and preventing production delays. When incorporated into a measurement or marking routine, the stencil supports faster cycle times and easier training for staff, delivering practical efficiency gains. Documentation and traceability are also simplified because the template provides an unambiguous physical reference that can be cited in work instructions and inspection protocols. Repeatable results for production and inspection Using a dedicated optical stencil for a defined diameter contributes to reproducible outcomes during assembly and quality control. The fixed Ø35 mm contour promotes uniformity across operators and shifts, which is particularly valuable for small-batch manufacturing and calibration checks. By reducing variance at the marking and checking stage, the tool supports a lower rate of corrective measures and a steadier process capability. The compact design of the stencil makes it suitable for bench use, inspection stations, or integration into a test fixture where repeatability and traceable references are required. For enquiries about the Peak Nr. 12 optical template (MS905.193) or to arrange supply from Metav Werkzeuge in Emmerich, please contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and fast fulfilment. Technical data Article number: MS905.193 Type: Nr. 12 Diameter: 35 mm Brand: Peak Designation: Peak templates Facts Ø: 35 mm SKU: MS905.193 Special features Category: Optics Intended use: aperture marking and verification Compact design for bench and fixture use FAQ What is the exact diameter of the aperture on this stencil? The stencil provides a fixed aperture diameter of 35 mm as indicated by the Ø35 mm specification for MS905.193. Which product reference should be ordered for the Nr. 12 optical template? Order reference MS905.193 for the Peak Nr. 12 optical template to ensure the correct Ø35 mm stencil is supplied. Can the stencil be used in a measurement fixture? Yes, the compact design of the Peak template Nr. 12 allows integration into fixtures and mounting plates for repeatable positioning. Is this stencil suitable for production verification as well as marking? The fixed aperture contour supports both marking and visual verification tasks, making it suitable for small-series production and inspection routines. How does the reference number help with inventory and traceability? The catalogue reference MS905.193 and the designation Nr. 12 provide unambiguous identification for ordering, stock management, and inclusion in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine consistent aperture sizing, clear identification and compatibility with optical inspection workflows to ensure repeatable alignment and measurement. Order the Peak Templates No. 6 (Ø35 mm) directly via Metav Werkzeuge or ask our consultants if needed. Peak Templates No. 6 (Ø35 mm) — optical template for standardised aperture checks The Peak Templates No. 6 (Ø35 mm) is a compact optical template designed for standardised aperture and alignment tasks in optical workshops and inspection benches. Optical template No. 6 Diameter Ø35 mm Article MS905.187 Ensure repeatable optical measurements with a standard aperture The central purpose of this optical stencil is to provide a consistent aperture for visual checks and gauging tasks. With a defined Ø35 mm opening, the device removes guesswork from repetitive inspections: the fixed aperture size standardises what is visible to the eye or to measuring instruments, which supports faster decision-making and reduces variation between operators. Identified by MS905.187, the item is intended for processes where a repeatable reference opening is required for alignment or visual comparison. Minimise setup time and streamline inspection routines A clearly defined template simplifies routine procedures, enabling workflow efficiency on the shop floor. The hard reference of a No. 6 aperture allows inspection sequences to be documented and repeated without additional measurement steps, which shortens cycle times and supports quality control protocols. When integrated into a checklist, the stencil acts as a time-saving aid that helps technicians focus on measurement outcomes rather than on setting up transient references. Fits into optical and inspection toolkits for consistent results As a purpose-made optical accessory, the template complements existing inspection equipment and aids in visual standardisation across workstations. The simple specification — a No. 6 aperture with Ø35 mm — makes it straightforward to catalogue and store alongside other gauges and stencils. The identifiable SKU and clear labelling assist stock management and traceability, supporting orderly workshop logistics and consistent application within quality assurance routines. Contact Metav Werkzeuge to discuss how the Peak template No. 6 (MS905.187) can standardise optical checks in the workshop and to arrange availability from our Emmerich distribution centre Technical data Article number: MS905.187 Name: Peak Templates No. 6 Brand: Peak Category: Optik Facts Diameter: 35 mm Type: Nr. 6 Special features Optical application Designation: No. 6, Ø35 mm Image asset available FAQ What aperture size does the template provide? The template provides a fixed aperture of Ø35 mm; the product is listed as Peak Templates No. 6 (MS905.187). Can this template be used for alignment and visual inspection? Yes, the stencil is intended for optical alignment and visual inspection tasks where a repeatable aperture reference is required. How is the product identified for ordering or stock management? The item is identified by SKU MS905.187 and by the designation No. 6, Ø35 mm in the product listing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a standardised Ø35 mm aperture and the recognised Peak format for consistent optical layout work; the compact Nr. 7 template streamlines repeatable marking tasks — order via Metav Werkzeuge or consult the team for application advice. Peak Schablonen Nr. 7 Ø35 mm — Optical template for standardised marking A Peak Schablonen Nr. 7 Ø35mm optical template designed to provide a repeatable reference aperture for optical workshops and inspection benches. Peak template Nr. 7, Ø35 mm Precise, standardised Ø35 mm aperture Designed for optical layout tasks SKU MS905.188 for easy reordering Reliable aperture control for repeatable results The stencil provides a clearly defined Ø35 mm opening that helps maintain consistent reference points during layout, marking or optical alignment procedures. By using a standardised aperture in a recognised Nr. 7 format, the template reduces variation between operators and across production batches, improving repeatability and lowering the risk of rework. For customers new to optical fixtures, the Ø value denotes the aperture diameter in millimetres — a direct, measurable parameter that determines the field of view or cut-out size required for many inspection and layout tasks. Easy integration into workshop processes Designed as a simple tool for everyday use in the optics category, the stencil supports smooth workflow integration. The standard format and clear designation make it straightforward to include in assembly kits, inspection stations or marking procedures; traceability is assisted by the clear SKU reference. Using a fixed aperture template speeds up setup and shortens non-productive time, which translates into more efficient throughput and fewer manual adjustments during quality checks. Order identification and documentation made straightforward Traceability and reordering are simplified with the included article reference. The product is listed under SKU MS905.188, enabling quick identification in procurement and inventory systems. Photographic assets are available for visual confirmation during specification and ordering, supporting clear documentation for technical files or parts lists. When consistent apertures are required across several workstations, standard templates in the same designation avoid incompatibilities and make audits and process documentation more robust. For standardised optical marking and reliable repeatability, contact Metav Werkzeuge to discuss the Peak template and how it fits into existing workflows — Metav Werkzeuge can supply product details, stock information and procurement support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: MS905.188 Article name: Peak Schablonen Type: Nr. 7 Brand: Peak Facts Diameter: 35 mm Special features Category: Optik Designation: Nr. 7, Ø35mm Image file: MS905188-main.jpg FAQ What is the exact aperture size of the template? The template features a Ø35 mm aperture, listed as the standard opening for the Nr. 7 designation. Which tasks is this template intended for? The stencil is intended for optical layout and marking tasks where a defined Ø35 mm reference is required; the Peak designation identifies the format. How can the item be ordered or identified in documentation? Ordering and documentation use the reference SKU MS905.188; this identifier ensures the correct Peak template is specified. Is there an image available to verify the design? An image is supplied under the filename MS905188-main.jpg for visual confirmation of the template form. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact standard sizing and reliable repeatability of these optical templates: the compact No. 8 form with Ø35 mm provides a consistent reference for inspection and alignment tasks, supporting efficient workflows and reduced setup times. Order directly via Metav Werkzeuge or consult the team for specification matching. Peak templates No. 8, Ø35 mm The Peak templates No. 8 (Ø35 mm) serve as standardised optical stencils for measurement and inspection applications in laboratories and workshops. Standard No. 8, Ø35 mm format Compact optical reference for repeatable checks Suitable for inspection and alignment tasks Clear labelling for quick identification Consistent reference for faster inspection The compact design provides a consistent reference for optical checks and repetitive measurement tasks. With a standard No. 8 form and a clearly defined Ø35 mm aperture, setup times are reduced and process reliability improves. The standard sizing supports compatibility with established inspection routines and simplifies documentation, making traceable checks quicker to perform and easier to reproduce. Simple handling and clear identification A concise format and visible labelling aid rapid selection and identification during busy workflows. The Ø35 mm size is easy to recognise, which reduces handling errors and supports orderly storage. Where several templates are used in sequence, the consistent geometry helps maintain alignment and minimises adjustment cycles, contributing to smoother throughput on the inspection bench. Practical advantages for small optical workshops For small laboratories and specialist workshops, a standard template like this streamlines routine tasks without requiring complex fixtures. The template functions as a straightforward optical reference that integrates into existing processes, enabling measurable time savings and improved repeatability in daily inspection work. Clear designation and compact form factor make it a practical addition to a precision-focused toolkit. For specific fitting advice and to confirm suitability for a given procedure, contact Metav Werkzeuge — Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Technical Data Article number: MS905.189 Name: Peak templates No. 8 Ø35 mm Brand: Peak Facts Diameter: Ø35 mm Type: No. 8 Category: Optik Special features Designation: Nr. 8, Ø35mm Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/86/2e/d0/67/67d02e86540165a317e1ab8e/MS905189-main.jpg FAQ What is the aperture size of the template? The aperture is Ø35 mm as shown in the product designation for the Peak templates (SKU MS905.189). How is the item identified? Identification is by the designation Nr. 8, Ø35mm and SKU MS905.189 under the Peak product line. Can the template be used for alignment checks? Yes, the template is intended as an optical reference for inspection and alignment tasks in workshops and labs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine the compact Ø35 mm format with the clear identification of the Peak template No. 9 for consistent optical layout work; order the item directly via Metav Werkzeuge or consult their advisers for procurement details. Peak template No. 9, Ø35 mm — optical template Peak template No. 9, Ø35 mm for simple circular layout and marking tasks in optical applications Peak template No. 9 Ø35 mm Intended for optical applications Compact design for easy handling Accurate circular layout for optical workshops The Ø35 mm dimension offers a defined reference for circular marking and layout tasks in optical work, supporting repeatable positioning and visual checks. As a small-format template, it provides a clear, recognisable outline that simplifies measurement-related operations. The simple geometry reduces setup time and helps maintain consistency across multiple items, enabling efficient batch preparation and saving precious workshop minutes. Streamlined handling to fit existing workflows The compact size and straightforward shape make this template easy to store alongside other optical tools and integrate into existing kits. Its form factor supports rapid identification during routine tasks and reduces the need for additional measuring equipment when a standard circular guide is required. The modest footprint also makes it suitable for bench-top use where space and accessibility are important for efficient task flow. Sourcing confidence and practical procurement Supplied as part of Peak's optical range and listed under SKU MS905.190, the item benefits from reliable distribution channels and transparent product identification. Procurement via Metav Werkzeuge ensures access to a wide selection of complementary tools and a centralised supply chain for optical workshops. Clear article labelling simplifies inventory management and reordering processes for professional environments. For Peak optical templates and procurement advice, contact Metav Werkzeuge in Emmerich — Metav provides a broad range of precision items and can assist with order placement and logistics via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.190 Name: Peak template No. 9, Ø35 mm Manufacturer: Peak Category: Optics Facts Diameter: 35 mm Special features Optical application Template type: No. 9 Image available: MS905190-main.jpg FAQ What is the exact diameter of the template? The template is specified with a diameter of Ø35 mm and is listed under SKU MS905.190. Which applications suit this template? The item is intended for optical applications where a fixed circular guide or marking reference with Ø35 mm is required. Who manufactures this template? This product is manufactured by Peak and offered as the Peak template No. 9 (MS905.190). How should the template be stored between uses? Store the template flat in a protected compartment or drawer to prevent scratches and to keep the circular reference free from debris. Is an image available to verify the design before purchase? An image is provided with the product listing (MS905190-main.jpg) to confirm shape and markings visually. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from high-precision marking and straightforward integration: the No. 2 template with Ø35 mm ensures consistent alignment for optical inspection and reduces setup time in repetitive tasks. Order the component directly via Metav Werkzeuge or request tailored advice from our consultants. Peak optical template No. 2 — Ø35 mm precision ring Peak optical template No. 2 provides a compact, ring-shaped guide for precise optical alignment and inspection tasks in workshops and production lines Peak optical template No. 2 Ø35 mm Designed for precise lens alignment Lightweight and stable ring shape Ready for integration into inspection workflows Consistent alignment for repeatable inspections The ring guide delivers reliable alignment for small optical components, translating the template’s fixed Ø35 mm diameter into repeatable positioning. By using a defined reference geometry, measurement variation is reduced and setup cycles are shortened, which supports higher throughput on repeat jobs. The clear, unambiguous form of the template helps technicians achieve consistent results even with limited metrology experience, lowering the risk of rework. Faster workflows with simple handling Thanks to its compact form and intuitive fit, this optical guide shortens preparation and inspection times. The design focuses on practical efficiency: quick placement and stable seating minimise handling steps and increase process rhythm. The direct consequence is less downtime between measurements and a more predictable production schedule, making the template a pragmatic choice for small-batch and serial inspection tasks. Seamless fit into existing inspection processes Built to complement standard optical fixtures and jigs, the template integrates without extensive modification of existing setups. The clear geometry supports visual and instrument-based checks and is suitable for a wide range of optics-related workshop tasks. Where repeatability and traceable positioning matter, this ring template becomes a dependable tool in the inspection toolkit, helping to maintain component quality across shifts. Contact Metav Werkzeuge for tailored advice on integrating the Peak optical template No. 2 (MS905.183) into inspection processes; stock is held in Emmerich and consultation is available for workflow alignment. Product details Article number: MS905.183 Brand: Peak Designation: Peak optical template No. 2 Type: No. 2 Facts Diameter: Ø35 mm Category: Optics Asset image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/81/2e/d0/67/67d02e8142e38a433141cfdf/MS905183-main.jpg Special features Compact ring geometry for optical alignment Suitable for inspection and positioning tasks SKU: MS905.183 FAQ What is the intended use of this template? The Peak optical template No. 2 (MS905.183) is intended as a positioning guide for optical alignment and inspection tasks where a fixed Ø35 mm reference improves repeatability. Is the Ø35 mm diameter compatible with precision jigs? Yes, the Ø35 mm dimension matches common small-scale inspection fixtures and can be used as a repeatable reference within existing jigs and holding devices. Can the template be used for instrument-based measurements? The ring form supports both visual alignment and instrument-assisted checks; the Peak optical template is designed to provide a stable reference for measurement equipment. How does the template help reduce setup time? By providing a defined geometry and secure seating, the template reduces trial adjustments and enables faster, repeatable placement, cutting overall preparation time per part. What product identifier should be referenced when ordering? Reference MS905.183 or Peak optical template No. 2 when enquiring or ordering to ensure the correct Ø35 mm guide is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com